From: Maxime Ripard <maxime.ripard@free-electrons.com> To: John Stultz <john.stultz@linaro.org>, Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Emilio Lopez <emilio@elopez.com.ar>, kevin@allwinnertech.com, sunny@allwinnertech.com, shuge@allwinnertech.com, linux-sunxi@googlegroups.com, Maxime Ripard <maxime.ripard@free-electrons.com> Subject: [PATCHv2 7/8] clocksource: sun4i: Cleanup parent clock setup Date: Fri, 28 Jun 2013 21:56:25 +0200 [thread overview] Message-ID: <1372449386-1334-8-git-send-email-maxime.ripard@free-electrons.com> (raw) In-Reply-To: <1372449386-1334-1-git-send-email-maxime.ripard@free-electrons.com> The current bring-up code for the timer was overly complicated. The only thing we need is actually which clock we want to use as source and that's pretty much all. Let's keep it that way. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- drivers/clocksource/sun4i_timer.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c index d6621c5..a77fa29 100644 --- a/drivers/clocksource/sun4i_timer.c +++ b/drivers/clocksource/sun4i_timer.c @@ -31,6 +31,9 @@ #define TIMER_CTL_REG(val) (0x10 * val + 0x10) #define TIMER_CTL_ENABLE BIT(0) #define TIMER_CTL_AUTORELOAD BIT(1) +#define TIMER_CTL_CLK_SRC(val) (((val) & 0x3) << 2) +#define TIMER_CTL_CLK_SRC_OSC24M (1) +#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4) #define TIMER_CTL_ONESHOT BIT(7) #define TIMER_INTVAL_REG(val) (0x10 * val + 0x14) #define TIMER_CNTVAL_REG(val) (0x10 * val + 0x18) @@ -144,16 +147,8 @@ static void __init sun4i_timer_init(struct device_node *node) writel(clk_get_rate(clk) / HZ, timer_base + TIMER_INTVAL_REG(0)); - /* set clock source to HOSC, 16 pre-division */ - val = readl(timer_base + TIMER_CTL_REG(0)); - val &= ~(0x07 << 4); - val &= ~(0x03 << 2); - val |= (4 << 4) | (1 << 2); - writel(val, timer_base + TIMER_CTL_REG(0)); - - /* set mode to auto reload */ - val = readl(timer_base + TIMER_CTL_REG(0)); - writel(val | TIMER_CTL_AUTORELOAD, timer_base + TIMER_CTL_REG(0)); + writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M) | TIMER_CTL_AUTORELOAD, + timer_base + TIMER_CTL_REG(0)); ret = setup_irq(irq, &sun4i_timer_irq); if (ret) -- 1.8.3.1
WARNING: multiple messages have this Message-ID (diff)
From: maxime.ripard@free-electrons.com (Maxime Ripard) To: linux-arm-kernel@lists.infradead.org Subject: [PATCHv2 7/8] clocksource: sun4i: Cleanup parent clock setup Date: Fri, 28 Jun 2013 21:56:25 +0200 [thread overview] Message-ID: <1372449386-1334-8-git-send-email-maxime.ripard@free-electrons.com> (raw) In-Reply-To: <1372449386-1334-1-git-send-email-maxime.ripard@free-electrons.com> The current bring-up code for the timer was overly complicated. The only thing we need is actually which clock we want to use as source and that's pretty much all. Let's keep it that way. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- drivers/clocksource/sun4i_timer.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c index d6621c5..a77fa29 100644 --- a/drivers/clocksource/sun4i_timer.c +++ b/drivers/clocksource/sun4i_timer.c @@ -31,6 +31,9 @@ #define TIMER_CTL_REG(val) (0x10 * val + 0x10) #define TIMER_CTL_ENABLE BIT(0) #define TIMER_CTL_AUTORELOAD BIT(1) +#define TIMER_CTL_CLK_SRC(val) (((val) & 0x3) << 2) +#define TIMER_CTL_CLK_SRC_OSC24M (1) +#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4) #define TIMER_CTL_ONESHOT BIT(7) #define TIMER_INTVAL_REG(val) (0x10 * val + 0x14) #define TIMER_CNTVAL_REG(val) (0x10 * val + 0x18) @@ -144,16 +147,8 @@ static void __init sun4i_timer_init(struct device_node *node) writel(clk_get_rate(clk) / HZ, timer_base + TIMER_INTVAL_REG(0)); - /* set clock source to HOSC, 16 pre-division */ - val = readl(timer_base + TIMER_CTL_REG(0)); - val &= ~(0x07 << 4); - val &= ~(0x03 << 2); - val |= (4 << 4) | (1 << 2); - writel(val, timer_base + TIMER_CTL_REG(0)); - - /* set mode to auto reload */ - val = readl(timer_base + TIMER_CTL_REG(0)); - writel(val | TIMER_CTL_AUTORELOAD, timer_base + TIMER_CTL_REG(0)); + writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M) | TIMER_CTL_AUTORELOAD, + timer_base + TIMER_CTL_REG(0)); ret = setup_irq(irq, &sun4i_timer_irq); if (ret) -- 1.8.3.1
next prev parent reply other threads:[~2013-06-28 19:56 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-06-28 19:56 [PATCHv2 0/8] clocksource: sunxi: Timer fixes and cleanup Maxime Ripard 2013-06-28 19:56 ` Maxime Ripard 2013-06-28 19:56 ` [PATCHv2 1/8] clocksource: sun4i: Use the BIT macros where possible Maxime Ripard 2013-06-28 19:56 ` Maxime Ripard 2013-06-28 19:56 ` [PATCHv2 2/8] clocksource: sun4i: Add clocksource and sched clock drivers Maxime Ripard 2013-06-28 19:56 ` Maxime Ripard 2013-06-28 19:56 ` [PATCHv2 3/8] clocksource: sun4i: Don't forget to enable the clock we use Maxime Ripard 2013-06-28 19:56 ` Maxime Ripard 2013-06-28 19:56 ` [PATCHv2 4/8] clocksource: sun4i: Fix the next event code Maxime Ripard 2013-06-28 19:56 ` Maxime Ripard 2013-06-28 20:13 ` Thomas Gleixner 2013-06-28 20:13 ` Thomas Gleixner 2013-06-28 20:35 ` Tomasz Figa 2013-06-28 20:35 ` Tomasz Figa 2013-06-28 21:20 ` Maxime Ripard 2013-06-28 21:20 ` Maxime Ripard 2013-06-28 21:08 ` Maxime Ripard 2013-06-28 21:08 ` Maxime Ripard 2013-06-28 21:27 ` Thomas Gleixner 2013-06-28 21:27 ` Thomas Gleixner 2013-06-29 6:48 ` Maxime Ripard 2013-06-29 6:48 ` Maxime Ripard 2013-07-01 8:15 ` Thomas Gleixner 2013-07-01 8:15 ` Thomas Gleixner 2013-06-28 19:56 ` [PATCHv2 5/8] clocksource: sun4i: Factor out some timer code Maxime Ripard 2013-06-28 19:56 ` Maxime Ripard 2013-06-28 19:56 ` [PATCHv2 6/8] clocksource: sun4i: Remove TIMER_SCAL variable Maxime Ripard 2013-06-28 19:56 ` Maxime Ripard 2013-06-28 19:56 ` Maxime Ripard [this message] 2013-06-28 19:56 ` [PATCHv2 7/8] clocksource: sun4i: Cleanup parent clock setup Maxime Ripard 2013-06-28 19:56 ` [PATCHv2 8/8] clocksource: sun4i: Fix bug when switching from periodic to oneshot modes Maxime Ripard 2013-06-28 19:56 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1372449386-1334-8-git-send-email-maxime.ripard@free-electrons.com \ --to=maxime.ripard@free-electrons.com \ --cc=emilio@elopez.com.ar \ --cc=john.stultz@linaro.org \ --cc=kevin@allwinnertech.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@googlegroups.com \ --cc=shuge@allwinnertech.com \ --cc=sunny@allwinnertech.com \ --cc=tglx@linutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.