* [Buildroot] [PATCH 00/67] libglib2 requires threads
@ 2013-07-15 19:46 Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 01/67] atk: " Spenser Gilliland
` (67 more replies)
0 siblings, 68 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
This patch removes support for an un-threaded version of libglib2. There were
minor cleanups and some bug fixes to various Config.in as well.
See autobuilder failures
http://autobuild.buildroot.net/results/d1fb882fe4d22a17bdd438360da515011dda2b30/build-end.log?
http://autobuild.buildroot.net/results/b66e807769ead5caa3e3b6312e9f7c35c14eafe7/build-end.log?
http://autobuild.buildroot.net/results/9c3fa0c5003a6369e70bfe6d611f7d745742a8c7/build-end.log?
Spenser Gilliland (67):
atk: libglib2 requires threads
bluez_utils: libglib2 requires threads
bustle: libglib2 requires threads
connman: libglib2 requires threads
avahi: libglib2 requires threads
curlftpfs: libglib2 requires threads
dbus-glib: libglib2 requires threads
dbus-python: libglib2 requires threads
docker: libglib2 requires threads
libedbus: libglib2 requires threads
libevas-generic-loaders: libglib2 requires threads
enchant: libglib2 requires threads
enlightenment: libglib2 requires threads
gamin: libglib2 requires threads
gdk-pixbuf: libglib2 requires threads
glib-networking: libglib2 requires threads
glibmm: libglib2 requires threads
gmpc: libglib2 requires threads
gob2: libglib2 requires threads
gvfs: libglib2 requires threads
json-glib: libglib2 requires threads
latencytop: libglib2 requires threads
libgail: libglib2 requires threads
libglade: libglib2 requires threads
libgtk2: libglib2 requires threads
libmms: libglib2 requires threads
libmpd: libglib2 requires threads
libplayer: libglib2 requires threads
libqmi: libglib2 requires threads
librsvg: libglib2 requires threads
libsoup: libglib2 requires threads
libxmlpp: libglib2 requires threads
lttng-babeltrace: libglib2 requires threads
midori: libglib2 requires threads
nbd: libglib2 requires threads
neard: libglib2 requires threads
neardal: libglib2 requires threads
network-manager: libglib2 requires threads
ofono: libglib2 requires threads
opencv: libglib2 requires threads
openobex: libglib2 requires threads
pango: libglib2 requires threads
pcmanfm: libglib2 requires threads
pkg-config: libglib2 requires threads
polkit: libglib2 requires threads
sconeserver: libglib2 requires threads
shared-mime-info: libglib2 requires threads
snowball-init: libglib2 requires threads
sshfs: libglib2 requires threads
sysprof: libglib2 requires threads
udev: libglib2 requires threads
udisks: libglib2 requires threads
ussp-push: libglib2 requires threads
vala: libglib2 requires threads
webkit: libglib2 requires threads
wireshark: libglib2 requires threads
gst-plugin-x170: libglib2 requires threads
gst-plugins-bad: libglib2 requires threads
gst-plugins-base: libglib2 requires threads
gst-plugins-good: libglib2 requires threads
gst1-plugins-good: libglib2 requires threads
gst1-plugins-base: libglib2 requires threads
gst1-plugins-bad: libglib2 requires threads
gstreamer: libglib2 requires threads
gstreamer1: libglib2 requires threads
mpd: libglib2 requires threads
libglib2: needs threads
package/atk/Config.in | 5 ++--
package/avahi/Config.in | 6 +++--
package/bluez_utils/Config.in | 4 +--
package/bustle/Config.in | 5 ++--
package/connman/Config.in | 4 +--
package/curlftpfs/Config.in | 4 +--
package/dbus-glib/Config.in | 6 +++--
package/dbus-python/Config.in | 6 +++--
package/docker/Config.in | 6 +++--
package/efl/libedbus/Config.in | 5 ++++
package/efl/libevas-generic-loaders/Config.in | 5 ++--
package/enchant/Config.in | 6 +++--
package/enlightenment/Config.in | 1 +
package/gamin/Config.in | 5 ++--
package/gdk-pixbuf/Config.in | 4 +++
package/glib-networking/Config.in | 5 ++--
package/glibmm/Config.in | 8 +++---
package/gmpc/Config.in | 6 +++--
package/gob2/Config.in | 3 ++-
package/gvfs/Config.in | 6 ++---
package/json-glib/Config.in | 5 ++--
package/latencytop/Config.in | 7 ++---
package/libgail/Config.in | 6 +++++
package/libglade/Config.in | 6 +++--
package/libglib2/Config.in | 5 ++--
...ib2-0002-fix-build-when-no-thread-support.patch | 30 ----------------------
package/libgtk2/Config.in | 11 +++++---
package/libmms/Config.in | 5 ++--
package/libmpd/Config.in | 5 ++--
package/libplayer/Config.in | 3 ++-
package/libqmi/Config.in | 4 +++
package/librsvg/Config.in | 5 ++--
package/libsoup/Config.in | 10 +++++---
package/libxmlpp/Config.in | 8 +++---
package/lttng-babeltrace/Config.in | 10 +++++---
package/midori/Config.in | 1 +
package/multimedia/gst-plugin-x170/Config.in | 4 +++
package/multimedia/gst-plugins-bad/Config.in | 12 +++++++--
package/multimedia/gst-plugins-base/Config.in | 7 +++--
package/multimedia/gst-plugins-good/Config.in | 10 ++++++++
package/multimedia/gst1-plugins-bad/Config.in | 12 +++++++--
package/multimedia/gst1-plugins-base/Config.in | 7 +++--
package/multimedia/gst1-plugins-good/Config.in | 10 ++++++++
package/multimedia/gstreamer/Config.in | 2 +-
package/multimedia/gstreamer1/Config.in | 4 +--
package/multimedia/mpd/Config.in | 8 +++---
package/nbd/Config.in | 9 ++++---
package/neard/Config.in | 11 +++++---
package/neardal/Config.in | 9 ++++---
package/network-manager/Config.in | 6 ++---
package/ofono/Config.in | 9 +++----
package/opencv/Config.in | 10 +++++---
package/openobex/Config.in | 20 ++++++++-------
package/pango/Config.in | 6 +++--
package/pcmanfm/Config.in | 6 +++--
package/pkg-config/Config.in | 5 ++--
package/polkit/Config.in | 5 ++--
package/sconeserver/Config.in | 2 +-
package/shared-mime-info/Config.in | 5 ++--
package/snowball-init/Config.in | 5 +++-
package/sshfs/Config.in | 2 +-
package/sysprof/Config.in | 10 +++++---
package/udev/Config.in | 5 ++++
package/udisks/Config.in | 13 +++++++---
package/ussp-push/Config.in | 2 +-
package/vala/Config.in | 5 ++--
package/webkit/Config.in | 8 +++---
package/wireshark/Config.in | 5 ++--
68 files changed, 289 insertions(+), 166 deletions(-)
delete mode 100644 package/libglib2/libglib2-0002-fix-build-when-no-thread-support.patch
--
1.8.1.2
^ permalink raw reply [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 01/67] atk: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 02/67] bluez_utils: " Spenser Gilliland
` (66 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/atk/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/atk/Config.in b/package/atk/Config.in
index 928fae7..7dec8b8 100644
--- a/package/atk/Config.in
+++ b/package/atk/Config.in
@@ -2,8 +2,9 @@ config BR2_PACKAGE_ATK
bool "atk"
select BR2_PACKAGE_LIBGLIB2
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
help
The ATK accessibility toolkit, needed to build GTK+-2.x.
-comment "atk requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "atk requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 02/67] bluez_utils: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 01/67] atk: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 03/67] bustle: " Spenser Gilliland
` (65 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/bluez_utils/Config.in | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/bluez_utils/Config.in b/package/bluez_utils/Config.in
index 72b900c..570ba75 100644
--- a/package/bluez_utils/Config.in
+++ b/package/bluez_utils/Config.in
@@ -2,7 +2,7 @@ config BR2_PACKAGE_BLUEZ_UTILS
bool "bluez-utils"
depends on !BR2_avr32
depends on BR2_USE_WCHAR # libglib2
- depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib
+ depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib, libglib2
depends on BR2_USE_MMU # dbus
select BR2_PACKAGE_DBUS
select BR2_PACKAGE_LIBGLIB2
@@ -38,5 +38,5 @@ config BR2_PACKAGE_BLUEZ_UTILS_USB
endif
-comment "bluez-utils require a toolchain with WCHAR and thread support"
+comment "bluez-utils require a toolchain with WCHAR and threading support"
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 03/67] bustle: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 01/67] atk: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 02/67] bluez_utils: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 04/67] connman: " Spenser Gilliland
` (64 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/bustle/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/bustle/Config.in b/package/bustle/Config.in
index 2a2a2c1..704165d 100644
--- a/package/bustle/Config.in
+++ b/package/bustle/Config.in
@@ -3,6 +3,7 @@ config BR2_PACKAGE_BUSTLE
select BR2_PACKAGE_LIBPCAP
select BR2_PACKAGE_LIBGLIB2
depends on BR2_USE_WCHAR # libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2
depends on BR2_PACKAGE_DBUS # runtime
help
Bustle is a better dbus-monitor! It records and draws
@@ -18,5 +19,5 @@ config BR2_PACKAGE_BUSTLE
http://www.willthompson.co.uk/bustle/
-comment "bustle requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "bustle requires a toolchain with WCHAR support and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 04/67] connman: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (2 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 03/67] bustle: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 05/67] avahi: minor cleanup Spenser Gilliland
` (63 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/connman/Config.in | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/connman/Config.in b/package/connman/Config.in
index e0505b3..0853941 100644
--- a/package/connman/Config.in
+++ b/package/connman/Config.in
@@ -7,7 +7,7 @@ config BR2_PACKAGE_CONNMAN
depends on !BR2_UCLIBC_VERSION_0_9_32
depends on BR2_USE_WCHAR # libglib2 and gnutls
depends on BR2_INET_IPV6
- depends on BR2_TOOLCHAIN_HAS_THREADS # dbus
+ depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, libglib2
depends on BR2_USE_MMU # dbus
help
The Connection Manager (ConnMan) project provides a daemon for
@@ -49,6 +49,6 @@ config BR2_PACKAGE_CONNMAN_CLIENT
endif # BR2_PACKAGE_CONNMAN
-comment "connman needs a toolchain with IPv6, WCHAR, thread and resolver support"
+comment "connman needs a toolchain with IPv6, WCHAR, threading and resolver support"
depends on BR2_UCLIBC_VERSION_0_9_32 || \
!BR2_USE_WCHAR || !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 05/67] avahi: minor cleanup
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (3 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 04/67] connman: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 06/67] curlftpfs: libglib2 requires threads Spenser Gilliland
` (62 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/avahi/Config.in | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/package/avahi/Config.in b/package/avahi/Config.in
index 60fd50f..c6af67e 100644
--- a/package/avahi/Config.in
+++ b/package/avahi/Config.in
@@ -10,10 +10,11 @@ config BR2_PACKAGE_AVAHI
http://www.avahi.org/
+if BR2_PACKAGE_AVAHI
+
config BR2_PACKAGE_AVAHI_AUTOIPD
bool "IPv4LL network address configuration daemon"
default y
- depends on BR2_PACKAGE_AVAHI
select BR2_PACKAGE_LIBDAEMON
help
Avahi-autoipd implements IPv4LL, "Dynamic Configuration of
@@ -25,7 +26,6 @@ config BR2_PACKAGE_AVAHI_AUTOIPD
config BR2_PACKAGE_AVAHI_DAEMON
bool "mDNS/DNS-SD daemon"
- depends on BR2_PACKAGE_AVAHI
select BR2_PACKAGE_LIBDAEMON
select BR2_PACKAGE_EXPAT
help
@@ -34,5 +34,7 @@ config BR2_PACKAGE_AVAHI_DAEMON
The daemon registers local IP addresses and services using
mDNS/DNS-SD.
+endif
+
comment "avahi requires a toolchain with thread support"
depends on !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 06/67] curlftpfs: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (4 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 05/67] avahi: minor cleanup Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 07/67] dbus-glib: " Spenser Gilliland
` (61 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/curlftpfs/Config.in | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/curlftpfs/Config.in b/package/curlftpfs/Config.in
index 0d8e715..ac527da 100644
--- a/package/curlftpfs/Config.in
+++ b/package/curlftpfs/Config.in
@@ -8,7 +8,7 @@ config BR2_PACKAGE_CURLFTPFS
select BR2_PACKAGE_LIBCURL
depends on BR2_LARGEFILE
depends on BR2_USE_WCHAR # glib2
- depends on BR2_TOOLCHAIN_HAS_THREADS # libfuse
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libfuse, glib2
depends on BR2_USE_MMU # libfuse
depends on !BR2_PREFER_STATIC_LIB # libfuse
help
@@ -17,5 +17,5 @@ config BR2_PACKAGE_CURLFTPFS
http://curlftpfs.sourceforge.net/
-comment "curlftpfs requires a toolchain with LARGEFILE, WCHAR, threads and dynamic library support"
+comment "curlftpfs requires a toolchain with LARGEFILE, WCHAR, threading and dynamic library support"
depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || BR2_PREFER_STATIC_LIB
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 07/67] dbus-glib: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (5 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 06/67] curlftpfs: libglib2 requires threads Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 08/67] dbus-python: " Spenser Gilliland
` (60 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/dbus-glib/Config.in | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/package/dbus-glib/Config.in b/package/dbus-glib/Config.in
index f1dab43..b019b34 100644
--- a/package/dbus-glib/Config.in
+++ b/package/dbus-glib/Config.in
@@ -2,11 +2,13 @@ config BR2_PACKAGE_DBUS_GLIB
bool "dbus-glib"
depends on BR2_PACKAGE_DBUS
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
help
GLib bindings for D-Bus.
http://www.freedesktop.org/software/dbus
-comment "dbus-glib requires a toolchain with WCHAR support"
- depends on BR2_PACKAGE_DBUS && !BR2_USE_WCHAR
+comment "dbus-glib requires a toolchain with WCHAR and threading support"
+ depends on BR2_PACKAGE_DBUS && \
+ (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 08/67] dbus-python: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (6 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 07/67] dbus-glib: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 09/67] docker: " Spenser Gilliland
` (59 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/dbus-python/Config.in | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/package/dbus-python/Config.in b/package/dbus-python/Config.in
index 91c127d..61e81e7 100644
--- a/package/dbus-python/Config.in
+++ b/package/dbus-python/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_DBUS_PYTHON
bool "dbus-python"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
depends on BR2_PACKAGE_DBUS
depends on BR2_PACKAGE_PYTHON
select BR2_PACKAGE_DBUS_GLIB
@@ -9,5 +10,6 @@ config BR2_PACKAGE_DBUS_PYTHON
http://dbus.freedesktop.org/doc/dbus-python/
-comment "dbus-python requires a toolchain with WCHAR support"
- depends on BR2_PACKAGE_DBUS && BR2_PACKAGE_PYTHON && !BR2_USE_WCHAR
+comment "dbus-python requires a toolchain with WCHAR and threading support"
+ depends on BR2_PACKAGE_DBUS && BR2_PACKAGE_PYTHON && \
+ (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 09/67] docker: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (7 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 08/67] dbus-python: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 10/67] libedbus: " Spenser Gilliland
` (58 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/docker/Config.in | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/package/docker/Config.in b/package/docker/Config.in
index f07739a..866ffcf 100644
--- a/package/docker/Config.in
+++ b/package/docker/Config.in
@@ -2,6 +2,7 @@ config BR2_PACKAGE_DOCKER
bool "docker"
depends on BR2_PACKAGE_XORG7
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_XLIB_LIBX11
help
@@ -9,5 +10,6 @@ config BR2_PACKAGE_DOCKER
http://icculus.org/openbox/2/docker
-comment "docker requires a toolchain with WCHAR support"
- depends on BR2_PACKAGE_XORG7 && !BR2_USE_WCHAR
+comment "docker requires a toolchain with WCHAR and threading support"
+ depends on BR2_PACKAGE_XORG7 && \
+ (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 10/67] libedbus: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (8 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 09/67] docker: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 11/67] libevas-generic-loaders: " Spenser Gilliland
` (57 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/efl/libedbus/Config.in | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/package/efl/libedbus/Config.in b/package/efl/libedbus/Config.in
index 64b001e..31a3b03 100644
--- a/package/efl/libedbus/Config.in
+++ b/package/efl/libedbus/Config.in
@@ -17,10 +17,15 @@ if BR2_PACKAGE_LIBEDBUS
config BR2_PACKAGE_LIBEDBUS_BLUEZ
bool "bluez support"
depends on !BR2_avr32 # bluez_utils
+ depends on BR2_USE_WCHAR # bluez_utils -> glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # bluez_utils -> glib2
select BR2_PACKAGE_BLUEZ_UTILS
help
Bluetooth support.
+comment "bluez support requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
+
config BR2_PACKAGE_LIBEDBUS_CONNMAN
bool "connman support"
depends on BR2_PACKAGE_CONNMAN
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 11/67] libevas-generic-loaders: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (9 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 10/67] libedbus: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 12/67] enchant: " Spenser Gilliland
` (56 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/efl/libevas-generic-loaders/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/efl/libevas-generic-loaders/Config.in b/package/efl/libevas-generic-loaders/Config.in
index bfa6097..5363794 100644
--- a/package/efl/libevas-generic-loaders/Config.in
+++ b/package/efl/libevas-generic-loaders/Config.in
@@ -15,11 +15,12 @@ config BR2_PACKAGE_LIBEVAS_GENERIC_LOADERS_SVG
select BR2_PACKAGE_LIBRSVG
select BR2_PACKAGE_CAIRO
depends on BR2_USE_WCHAR # librsvg -> glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # librsvg -> glib2
depends on BR2_INSTALL_LIBSTDCPP # librsvg -> pango
help
This option enables the Evas generic SVG loader
-comment "SVG loader requires a toolchain with WCHAR and C++ support"
- depends on !BR2_USE_WCHAR && !BR2_INSTALL_LIBSTDCPP
+comment "SVG loader requires a toolchain with WCHAR, threading and C++ support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP
endif
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 12/67] enchant: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (10 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 11/67] libevas-generic-loaders: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 13/67] enlightenment: " Spenser Gilliland
` (55 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/enchant/Config.in | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/package/enchant/Config.in b/package/enchant/Config.in
index 33f36db..783c73e 100644
--- a/package/enchant/Config.in
+++ b/package/enchant/Config.in
@@ -2,6 +2,7 @@ config BR2_PACKAGE_ENCHANT
bool "enchant"
depends on BR2_INSTALL_LIBSTDCPP
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
help
Enchant is a spell-checking library that provides a consistent
@@ -9,5 +10,6 @@ config BR2_PACKAGE_ENCHANT
http://www.abisource.com/projects/enchant/
-comment "enchant requires a toolchain with C++ and WCHAR support enabled"
- depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR
+comment "enchant requires a toolchain with C++, threading and WCHAR support enabled"
+ depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
+ !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 13/67] enlightenment: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (11 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 12/67] enchant: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 14/67] gamin: " Spenser Gilliland
` (54 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/enlightenment/Config.in | 1 +
1 file changed, 1 insertion(+)
diff --git a/package/enlightenment/Config.in b/package/enlightenment/Config.in
index 357c72b..f86f271 100644
--- a/package/enlightenment/Config.in
+++ b/package/enlightenment/Config.in
@@ -21,6 +21,7 @@ config BR2_PACKAGE_ENLIGHTENMENT
depends on BR2_USE_WCHAR
depends on BR2_INSTALL_LIBSTDCPP
# libedbus -> dbus
+ # libedbus -> glib2
depends on BR2_TOOLCHAIN_HAS_THREADS
# libedbus -> dbus
depends on BR2_USE_MMU
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 14/67] gamin: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (12 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 13/67] enlightenment: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 15/67] gdk-pixbuf: " Spenser Gilliland
` (53 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/gamin/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/gamin/Config.in b/package/gamin/Config.in
index 3ede2e4..369c10e 100644
--- a/package/gamin/Config.in
+++ b/package/gamin/Config.in
@@ -1,11 +1,12 @@
config BR2_PACKAGE_GAMIN
bool "gamin"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
help
the File Alteration Monitor
http://www.gnome.org/~veillard/gamin/sources
-comment "gamin requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "gamin requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 15/67] gdk-pixbuf: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (13 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 14/67] gamin: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 16/67] glib-networking: " Spenser Gilliland
` (52 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/gdk-pixbuf/Config.in | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/package/gdk-pixbuf/Config.in b/package/gdk-pixbuf/Config.in
index 33b5f7c..05de934 100644
--- a/package/gdk-pixbuf/Config.in
+++ b/package/gdk-pixbuf/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_GDK_PIXBUF
bool "gdk-pixbuf"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT
select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
@@ -9,3 +10,6 @@ config BR2_PACKAGE_GDK_PIXBUF
and the GLib, to integrate well with GNOME applications.
http://www.gtk.org/
+
+comment "gdk-pixbuf depends on toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 16/67] glib-networking: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (14 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 15/67] gdk-pixbuf: " Spenser Gilliland
@ 2013-07-15 19:46 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 17/67] glibmm: " Spenser Gilliland
` (51 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:46 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/glib-networking/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/glib-networking/Config.in b/package/glib-networking/Config.in
index dab35ea..8d106f5 100644
--- a/package/glib-networking/Config.in
+++ b/package/glib-networking/Config.in
@@ -1,10 +1,11 @@
config BR2_PACKAGE_GLIB_NETWORKING
bool "glib-networking"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT
help
Network-related GIO modules for glib.
-comment "glib-networking requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "glib-networking requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 17/67] glibmm: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (15 preceding siblings ...)
2013-07-15 19:46 ` [Buildroot] [PATCH 16/67] glib-networking: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 18/67] gmpc: " Spenser Gilliland
` (50 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/glibmm/Config.in | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/package/glibmm/Config.in b/package/glibmm/Config.in
index cd4ac01..fddd5e4 100644
--- a/package/glibmm/Config.in
+++ b/package/glibmm/Config.in
@@ -3,11 +3,13 @@ config BR2_PACKAGE_GLIBMM
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_LIBSIGC
depends on BR2_INSTALL_LIBSTDCPP
- depends on BR2_USE_WCHAR
+ depends on BR2_USE_WCHAR # libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2
help
The GLibmm package is a set of C++ bindings for GLib.
http://www.gtkmm.org/
-comment "glibmm requires a toolchain with C++ & WCHAR support enabled"
- depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR
+comment "glibmm requires a toolchain with C++, WCHAR, and threading support"
+ depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
+ !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 18/67] gmpc: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (16 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 17/67] glibmm: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 19/67] gob2: " Spenser Gilliland
` (49 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/gmpc/Config.in | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/package/gmpc/Config.in b/package/gmpc/Config.in
index 9b38d1a..96dc58f 100644
--- a/package/gmpc/Config.in
+++ b/package/gmpc/Config.in
@@ -2,6 +2,7 @@ config BR2_PACKAGE_GMPC
bool "gmpc"
depends on BR2_PACKAGE_LIBGTK2
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
depends on BR2_PACKAGE_XORG7
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT_IF_LOCALE
@@ -19,5 +20,6 @@ config BR2_PACKAGE_GMPC
http://gmpcwiki.sarine.nl/index.php?title=GMPC
-comment "gmpc requires a toolchain with WCHAR support"
- depends on BR2_PACKAGE_LIBGTK2 && !BR2_USE_WCHAR
+comment "gmpc requires a toolchain with WCHAR and threading support"
+ depends on BR2_PACKAGE_LIBGTK2 && !BR2_USE_WCHAR || \
+ !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 19/67] gob2: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (17 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 18/67] gmpc: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 20/67] gvfs: " Spenser Gilliland
` (48 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/gob2/Config.in | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/package/gob2/Config.in b/package/gob2/Config.in
index 4a09c41..d795335 100644
--- a/package/gob2/Config.in
+++ b/package/gob2/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_GOB2
bool "gob2"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
# m4 uses fork(), so does bison then
depends on BR2_USE_MMU
select BR2_PACKAGE_LIBGLIB2
@@ -13,4 +14,4 @@ config BR2_PACKAGE_GOB2
http://www.jirka.org/gob.html
comment "gob2 requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 20/67] gvfs: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (18 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 19/67] gob2: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 21/67] json-glib: " Spenser Gilliland
` (47 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/gvfs/Config.in | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/package/gvfs/Config.in b/package/gvfs/Config.in
index e0a945e..63c4996 100644
--- a/package/gvfs/Config.in
+++ b/package/gvfs/Config.in
@@ -3,7 +3,7 @@ config BR2_PACKAGE_GVFS
depends on BR2_LARGEFILE
depends on BR2_USE_WCHAR # glib2
depends on BR2_USE_MMU # dbus
- depends on BR2_TOOLCHAIN_HAS_THREADS # dbus
+ depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, glib2
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_DBUS
select BR2_PACKAGE_SHARED_MIME_INFO
@@ -16,5 +16,5 @@ config BR2_PACKAGE_GVFS
http://en.wikipedia.org/wiki/GVFS
-comment "gvfs requires a toolchain with LARGEFILE and WCHAR support"
- depends on !BR2_LARGEFILE || !BR2_USE_WCHAR
+comment "gvfs requires a toolchain with LARGEFILE, WCHAR and threading support"
+ depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 21/67] json-glib: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (19 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 20/67] gvfs: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 22/67] latencytop: " Spenser Gilliland
` (46 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/json-glib/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/json-glib/Config.in b/package/json-glib/Config.in
index 3ebc76d..db25386 100644
--- a/package/json-glib/Config.in
+++ b/package/json-glib/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_JSON_GLIB
bool "json-glib"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT
help
@@ -10,5 +11,5 @@ config BR2_PACKAGE_JSON_GLIB
https://live.gnome.org/JsonGlib/
-comment "json-glib requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "json-glib requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 22/67] latencytop: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (20 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 21/67] json-glib: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 23/67] libgail: " Spenser Gilliland
` (45 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/latencytop/Config.in | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/package/latencytop/Config.in b/package/latencytop/Config.in
index 12176c0..23e4c63 100644
--- a/package/latencytop/Config.in
+++ b/package/latencytop/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_LATENCYTOP
bool "latencytop"
- depends on BR2_USE_WCHAR
+ depends on BR2_USE_WCHAR # libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2
select BR2_PACKAGE_NCURSES
select BR2_PACKAGE_LIBGLIB2
help
@@ -19,5 +20,5 @@ config BR2_PACKAGE_LATENCYTOP
http://www.latencytop.org
-comment "latencytop requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "latencytop requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 23/67] libgail: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (21 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 22/67] latencytop: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-16 8:16 ` Thomas Petazzoni
2013-07-15 19:47 ` [Buildroot] [PATCH 24/67] libglade: " Spenser Gilliland
` (44 subsequent siblings)
67 siblings, 1 reply; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/libgail/Config.in | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/package/libgail/Config.in b/package/libgail/Config.in
index ba74795..3e1af62 100644
--- a/package/libgail/Config.in
+++ b/package/libgail/Config.in
@@ -1,5 +1,7 @@
config BR2_PACKAGE_LIBGAIL
bool "libgail"
+ depends on BR2_USE_WCHAR # pango -> libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # pango -> libglib2
depends on BR2_PACKAGE_LIBGTK2
select BR2_PACKAGE_PANGO
help
@@ -16,3 +18,7 @@ config BR2_PACKAGE_LIBGAIL
program.
http://developer.gnome.org/projects/gap
+
+comment "libgail requires a toolchain with WCHAR and threading support"
+ depends on BR2_PACKAGE_LIBGTK2 && \
+ (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 24/67] libglade: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (22 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 23/67] libgail: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-16 8:17 ` Thomas Petazzoni
2013-07-15 19:47 ` [Buildroot] [PATCH 25/67] libgtk2: " Spenser Gilliland
` (43 subsequent siblings)
67 siblings, 1 reply; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/libglade/Config.in | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/package/libglade/Config.in b/package/libglade/Config.in
index f7a9a1c..d042517 100644
--- a/package/libglade/Config.in
+++ b/package/libglade/Config.in
@@ -2,6 +2,7 @@ config BR2_PACKAGE_LIBGLADE
bool "libglade"
depends on BR2_PACKAGE_LIBGTK2
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_ATK
select BR2_PACKAGE_LIBXML2
@@ -12,5 +13,6 @@ config BR2_PACKAGE_LIBGLADE
http://ftp.gnome.org/pub/GNOME/sources/libglade/
-comment "libglade requires a toolchain with WCHAR support"
- depends on BR2_PACKAGE_LIBGTK2 && !BR2_USE_WCHAR
+comment "libglade requires a toolchain with WCHAR and threading support"
+ depends on BR2_PACKAGE_LIBGTK2 && \
+ (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 25/67] libgtk2: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (23 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 24/67] libglade: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 26/67] libmms: " Spenser Gilliland
` (42 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
minor clean up as well.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/libgtk2/Config.in | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/package/libgtk2/Config.in b/package/libgtk2/Config.in
index 462b0b6..c280c6a 100644
--- a/package/libgtk2/Config.in
+++ b/package/libgtk2/Config.in
@@ -14,18 +14,23 @@ config BR2_PACKAGE_LIBGTK2
select BR2_PACKAGE_XLIB_LIBXRENDER
depends on BR2_PACKAGE_XORG7
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
depends on BR2_INSTALL_LIBSTDCPP # pango
help
The GTK+ version 2 graphical user interface library
http://www.gtk.org/
+if BR2_PACKAGE_LIBGTK2
+
config BR2_PACKAGE_LIBGTK2_DEMO
bool "Install libgtk2 demo program"
- depends on BR2_PACKAGE_LIBGTK2
help
The GTK+ source base contains a gtk-demo program. This
option allows to install this program to the target.
-comment "libgtk2 requires a toolchain with WCHAR and C++ support"
- depends on !BR2_USE_WCHAR || !BR2_INSTALL_LIBSTDCPP
+endif
+
+comment "libgtk2 requires a toolchain with WCHAR, threading and C++ support"
+ depends on !BR2_USE_WCHAR || !BR2_INSTALL_LIBSTDCPP || \
+ !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 26/67] libmms: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (24 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 25/67] libgtk2: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 27/67] libmpd: " Spenser Gilliland
` (41 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/libmms/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/libmms/Config.in b/package/libmms/Config.in
index 17cb406..3cabbc7 100644
--- a/package/libmms/Config.in
+++ b/package/libmms/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_LIBMMS
bool "libmms"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
help
LibMMS is a common library for parsing mms:// and mmsh://
@@ -11,5 +12,5 @@ config BR2_PACKAGE_LIBMMS
http://launchpad.net/libmms
-comment "libmms requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "libmms requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 27/67] libmpd: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (25 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 26/67] libmms: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 28/67] libplayer: " Spenser Gilliland
` (40 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/libmpd/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/libmpd/Config.in b/package/libmpd/Config.in
index 9259c19..7617e88 100644
--- a/package/libmpd/Config.in
+++ b/package/libmpd/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_LIBMPD
bool "libmpd"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
help
@@ -10,5 +11,5 @@ config BR2_PACKAGE_LIBMPD
http://gmpcwiki.sarine.nl/index.php?title=Libmpd
-comment "libmpd requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "libmpd requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 28/67] libplayer: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (26 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 27/67] libmpd: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 29/67] libqmi: " Spenser Gilliland
` (39 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/libplayer/Config.in | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/package/libplayer/Config.in b/package/libplayer/Config.in
index df32901..e1b7f75 100644
--- a/package/libplayer/Config.in
+++ b/package/libplayer/Config.in
@@ -21,9 +21,10 @@ config BR2_PACKAGE_LIBPLAYER_MPLAYER
config BR2_PACKAGE_LIBPLAYER_GSTREAMER
bool "gstreamer backend"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_GSTREAMER
-comment "gstreamer backend requires a toolchain with WCHAR support"
+comment "gstreamer backend requires a toolchain with WCHAR and threading support"
depends on !BR2_USE_WCHAR
config BR2_PACKAGE_LIBPLAYER_PYTHON
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 29/67] libqmi: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (27 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 28/67] libplayer: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 30/67] librsvg: " Spenser Gilliland
` (38 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/libqmi/Config.in | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/package/libqmi/Config.in b/package/libqmi/Config.in
index c5e8a5c..8484250 100644
--- a/package/libqmi/Config.in
+++ b/package/libqmi/Config.in
@@ -2,8 +2,12 @@ config BR2_PACKAGE_LIBQMI
bool "libqmi"
select BR2_PACKAGE_LIBGLIB2
depends on BR2_USE_WCHAR # libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2
help
libqmi is a glib-based library for talking to WWAN modems and devices
which speak the Qualcomm MSM Interface (QMI) protocol.
http://www.freedesktop.org/wiki/Software/libqmi/
+
+comment "libqmi requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 30/67] librsvg: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (28 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 29/67] libqmi: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 31/67] libsoup: " Spenser Gilliland
` (37 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/librsvg/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/librsvg/Config.in b/package/librsvg/Config.in
index b2ef6ad..ce711f7 100644
--- a/package/librsvg/Config.in
+++ b/package/librsvg/Config.in
@@ -7,6 +7,7 @@ config BR2_PACKAGE_LIBRSVG
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_GDK_PIXBUF
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
depends on BR2_INSTALL_LIBSTDCPP # pango
help
The rsvg library is an efficient renderer for Scalable
@@ -14,5 +15,5 @@ config BR2_PACKAGE_LIBRSVG
http://librsvg.sourceforge.net/
-comment "librsvg requires a toolchain with WCHAR and C++ support"
- depends on !BR2_USE_WCHAR || !BR2_INSTALL_LIBSTDCPP
+comment "librsvg requires a toolchain with WCHAR, threading and C++ support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 31/67] libsoup: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (29 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 30/67] librsvg: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 32/67] libxmlpp: " Spenser Gilliland
` (36 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
minor cleanup as well
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/libsoup/Config.in | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/package/libsoup/Config.in b/package/libsoup/Config.in
index 2ed08d9..b80cb63 100644
--- a/package/libsoup/Config.in
+++ b/package/libsoup/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_LIBSOUP
bool "libsoup"
depends on BR2_USE_WCHAR # glib2 and gnutls
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBXML2
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT
@@ -12,13 +13,16 @@ config BR2_PACKAGE_LIBSOUP
http://live.gnome.org/LibSoup
+if BR2_PACKAGE_LIBSOUP
+
config BR2_PACKAGE_LIBSOUP_SSL
bool "https support"
select BR2_PACKAGE_GLIB_NETWORKING
select BR2_PACKAGE_GNUTLS
- depends on BR2_PACKAGE_LIBSOUP
help
Enable HTTPS (SSL) support.
-comment "libsoup requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+endif
+
+comment "libsoup requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 32/67] libxmlpp: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (30 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 31/67] libsoup: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 33/67] lttng-babeltrace: " Spenser Gilliland
` (35 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/libxmlpp/Config.in | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/package/libxmlpp/Config.in b/package/libxmlpp/Config.in
index cf29c2c..2448bfd 100644
--- a/package/libxmlpp/Config.in
+++ b/package/libxmlpp/Config.in
@@ -3,11 +3,13 @@ config BR2_PACKAGE_LIBXMLPP
select BR2_PACKAGE_LIBXML2
select BR2_PACKAGE_GLIBMM
depends on BR2_INSTALL_LIBSTDCPP
- depends on BR2_USE_WCHAR
+ depends on BR2_USE_WCHAR # glibmm -> libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glibmm -> libglib2
help
libxml++ is a C++ wrapper for the libxml XML parser library.
http://libxmlplusplus.sourceforge.net/
-comment "libxml++ requires a toolchain with C++ & WCHAR support enabled"
- depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR
+comment "libxml++ requires a toolchain with C++, WCHAR and threading support"
+ depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
+ !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 33/67] lttng-babeltrace: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (31 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 32/67] libxmlpp: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 34/67] midori: " Spenser Gilliland
` (34 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/lttng-babeltrace/Config.in | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/package/lttng-babeltrace/Config.in b/package/lttng-babeltrace/Config.in
index 6f47304..4f14477 100644
--- a/package/lttng-babeltrace/Config.in
+++ b/package/lttng-babeltrace/Config.in
@@ -4,9 +4,10 @@ config BR2_PACKAGE_LTTNG_BABELTRACE
select BR2_PACKAGE_UTIL_LINUX
select BR2_PACKAGE_UTIL_LINUX_LIBUUID
select BR2_PACKAGE_LIBGLIB2
- # libglib2 needs gettext which needs wchar support, and we
- # also depends on util-linux which needs wchar
+ # libglib2 needs thread support and gettext which needs wchar support, and
+ # we also depends on util-linux which needs wchar
depends on BR2_USE_WCHAR
+ depends on BR2_TOOLCHAIN_HAS_THREADS
# util-linux depends on largefile support
depends on BR2_LARGEFILE
help
@@ -26,5 +27,6 @@ config BR2_PACKAGE_LTTNG_BABELTRACE
http://lttng.org
-comment "lttng-babeltrace needs WCHAR and LARGEFILE support"
- depends on BR2_PACKAGE_LTTNG_TOOLS && !(BR2_USE_WCHAR || BR2_LARGEFILE)
+comment "lttng-babeltrace needs WCHAR, threading and LARGEFILE support"
+ depends on BR2_PACKAGE_LTTNG_TOOLS && \
+ (!BR2_USE_WCHAR || !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 34/67] midori: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (32 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 33/67] lttng-babeltrace: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 35/67] nbd: " Spenser Gilliland
` (33 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/midori/Config.in | 1 +
1 file changed, 1 insertion(+)
diff --git a/package/midori/Config.in b/package/midori/Config.in
index 41f4515..207e3ca 100644
--- a/package/midori/Config.in
+++ b/package/midori/Config.in
@@ -6,6 +6,7 @@ config BR2_PACKAGE_MIDORI
select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
depends on BR2_PACKAGE_LIBGTK2
depends on BR2_INSTALL_LIBSTDCPP # webkit
+ depends on BR2_TOOLCHAIN_HAS_THREADS # webkit -> enchant -> libglib2
depends on BR2_USE_WCHAR # webkit
help
Midori is a lightweight web browser based on WebKit
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 35/67] nbd: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (33 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 34/67] midori: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 36/67] neard: " Spenser Gilliland
` (32 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
minor cleanup as well
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/nbd/Config.in | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/package/nbd/Config.in b/package/nbd/Config.in
index 79b34de..d185a48 100644
--- a/package/nbd/Config.in
+++ b/package/nbd/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_NBD
bool "nbd"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
help
NBD is a set of utilities to configure network block devices,
@@ -8,9 +9,6 @@ config BR2_PACKAGE_NBD
http://nbd.sf.net/
-comment "nbd requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
-
if BR2_PACKAGE_NBD
config BR2_NBD_CLIENT
@@ -25,3 +23,8 @@ config BR2_NBD_SERVER
the server part of NBD.
endif
+
+comment "nbd requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
+
+
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 36/67] neard: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (34 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 35/67] nbd: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 37/67] neardal: " Spenser Gilliland
` (31 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
minor clean up as well
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/neard/Config.in | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/package/neard/Config.in b/package/neard/Config.in
index ec1fcb3..b23a154 100644
--- a/package/neard/Config.in
+++ b/package/neard/Config.in
@@ -1,7 +1,7 @@
config BR2_PACKAGE_NEARD
bool "neard"
depends on BR2_USE_WCHAR # libglib2
- depends on BR2_TOOLCHAIN_HAS_THREADS # libnl / dbus
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libnl, dbus, libglib2
depends on BR2_USE_MMU # dbus
select BR2_PACKAGE_DBUS
select BR2_PACKAGE_LIBGLIB2
@@ -14,11 +14,14 @@ config BR2_PACKAGE_NEARD
https://01.org/linux-nfc/documentation/how-start-linux-nfc-code...
+if BR2_PACKAGE_NEARD
+
config BR2_PACKAGE_NEARD_TOOLS
bool "neard tools"
- depends on BR2_PACKAGE_NEARD
help
Build and install neard tools.
-comment "neard requires a toolchain with WCHAR and threads support"
- depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
+endif
+
+comment "neard requires an MMU and a toolchain with WCHAR and threads support"
+ depends on !BR2_USE_MMU || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 37/67] neardal: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (35 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 36/67] neard: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 38/67] network-manager: " Spenser Gilliland
` (30 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
minor cleanups as well
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/neardal/Config.in | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/package/neardal/Config.in b/package/neardal/Config.in
index 76b5ffa..3841cac 100644
--- a/package/neardal/Config.in
+++ b/package/neardal/Config.in
@@ -1,7 +1,7 @@
config BR2_PACKAGE_NEARDAL
bool "neardal"
depends on BR2_USE_WCHAR # glib2
- depends on BR2_TOOLCHAIN_HAS_THREADS # dbus
+ depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, glib2
depends on BR2_USE_MMU # dbus
select BR2_PACKAGE_DBUS
select BR2_PACKAGE_DBUS_GLIB
@@ -11,11 +11,14 @@ config BR2_PACKAGE_NEARDAL
https://github.com/connectivity/neardal
+if BR2_PACKAGE_NEARDAL
+
config BR2_PACKAGE_NEARDAL_NCL
bool "ncl tool"
- depends on BR2_PACKAGE_NEARDAL
help
Build and install neardal ncl command line interpreter tool.
-comment "neardal requires a toolchain with WCHAR and threads support"
+endif
+
+comment "neardal requires a toolchain with WCHAR and threading support"
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 38/67] network-manager: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (36 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 37/67] neardal: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 39/67] ofono: " Spenser Gilliland
` (29 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/network-manager/Config.in | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/package/network-manager/Config.in b/package/network-manager/Config.in
index cc33a1d..4b1116c 100644
--- a/package/network-manager/Config.in
+++ b/package/network-manager/Config.in
@@ -5,7 +5,7 @@ config BR2_PACKAGE_NETWORK_MANAGER
depends on BR2_INET_IPV6
depends on BR2_LARGEFILE # acl
depends on BR2_USE_WCHAR # libglib2 and gnutls
- depends on BR2_TOOLCHAIN_HAS_THREADS # dbus
+ depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, libglib2
depends on BR2_USE_MMU # dbus
select BR2_PACKAGE_DBUS_GLIB
select BR2_PACKAGE_UDEV
@@ -27,6 +27,6 @@ config BR2_PACKAGE_NETWORK_MANAGER
http://projects.gnome.org/NetworkManager/
-comment "NetworkManager requires a toolchain with IPV6, LARGEFILE, WCHAR and thread support"
- depends on !BR2_INET_IPV6 || !BR2_LARGEFILE || !BR2_USE_WCHAR || \
+comment "NetworkManager requires an MMU and a toolchain with IPV6, LARGEFILE, WCHAR and thread support"
+ depends on !BR2_USE_MMU || !BR2_INET_IPV6 || !BR2_LARGEFILE || !BR2_USE_WCHAR || \
!BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 39/67] ofono: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (37 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 38/67] network-manager: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 40/67] opencv: " Spenser Gilliland
` (28 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/ofono/Config.in | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/package/ofono/Config.in b/package/ofono/Config.in
index 6248544..f1b6a53 100644
--- a/package/ofono/Config.in
+++ b/package/ofono/Config.in
@@ -1,7 +1,7 @@
config BR2_PACKAGE_OFONO
bool "ofono"
- depends on BR2_USE_WCHAR # gettext/libglib2
- depends on BR2_TOOLCHAIN_HAS_THREADS # dbus
+ depends on BR2_USE_WCHAR # gettext, libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, libglib2
depends on BR2_USE_MMU # dbus
select BR2_PACKAGE_LIBCAP_NG
select BR2_PACKAGE_DBUS
@@ -14,6 +14,5 @@ config BR2_PACKAGE_OFONO
http://ofono.org/
-comment "ofono requires a toolchain with WCHAR and thread support"
- depends on !BR2_USE_WCHAR || \
- !BR2_TOOLCHAIN_HAS_THREADS
+comment "ofono requires an MMU and toolchain with WCHAR and thread support"
+ depends on !BR2_USE_MMU || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 40/67] opencv: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (38 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 39/67] ofono: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 41/67] openobex: " Spenser Gilliland
` (27 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/opencv/Config.in | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/package/opencv/Config.in b/package/opencv/Config.in
index 26bf5e7..c6ec3fe 100644
--- a/package/opencv/Config.in
+++ b/package/opencv/Config.in
@@ -139,16 +139,20 @@ comment "ffmpeg support requires a toolchain with LARGEFILE and IPV6 support"
config BR2_PACKAGE_OPENCV_WITH_GSTREAMER
bool "gstreamer support"
- depends on BR2_USE_WCHAR
- depends on BR2_TOOLCHAIN_HAS_THREADS
+ depends on BR2_USE_WCHAR # gstreamer -> libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # gstreamer -> libglib2
select BR2_PACKAGE_GSTREAMER
select BR2_PACKAGE_GST_PLUGINS_BASE
select BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_APP
+comment "gstreamer support requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
+
config BR2_PACKAGE_OPENCV_WITH_GTK
bool "gtk support"
depends on BR2_PACKAGE_XORG7||BR2_PACKAGE_DIRECTFB
- depends on BR2_USE_WCHAR
+ depends on BR2_USE_WCHAR # libgtk2 -> libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libgtk2 -> libglib2
depends on BR2_INSTALL_LIBSTDCPP
select BR2_PACKAGE_LIBGTK2
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 41/67] openobex: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (39 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 40/67] opencv: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 42/67] pango: " Spenser Gilliland
` (26 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/openobex/Config.in | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/package/openobex/Config.in b/package/openobex/Config.in
index 6494b29..83522d9 100644
--- a/package/openobex/Config.in
+++ b/package/openobex/Config.in
@@ -1,6 +1,3 @@
-comment "openobex requires a toolchain with IPV6 support"
- depends on !BR2_INET_IPV6
-
config BR2_PACKAGE_OPENOBEX
bool "openobex"
depends on BR2_INET_IPV6
@@ -12,25 +9,25 @@ config BR2_PACKAGE_OPENOBEX
if BR2_PACKAGE_OPENOBEX
-comment "bluez support require a toolchain with WCHAR and thread support"
- depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
-
config BR2_PACKAGE_OPENOBEX_BLUEZ
bool "enable bluez support"
depends on !BR2_avr32
depends on BR2_USE_WCHAR # libglib2
- depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib
+ depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib, libglib2
depends on BR2_USE_MMU # dbus
select BR2_PACKAGE_BLUEZ_UTILS
-comment "libusb support require a toolchain with thread support"
- depends on !BR2_TOOLCHAIN_HAS_THREADS
+comment "bluez support require a toolchain with WCHAR and thread support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_OPENOBEX_LIBUSB
bool "enable libusb support"
depends on BR2_TOOLCHAIN_HAS_THREADS
select BR2_PACKAGE_LIBUSB
+comment "libusb support require a toolchain with thread support"
+ depends on !BR2_TOOLCHAIN_HAS_THREADS
+
config BR2_PACKAGE_OPENOBEX_APPS
bool "install test applications"
help
@@ -43,3 +40,8 @@ config BR2_PACKAGE_OPENOBEX_DUMP
bool "enable protocol dumping for debugging"
endif
+
+comment "openobex requires a toolchain with IPV6 support"
+ depends on !BR2_INET_IPV6
+
+
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 42/67] pango: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (40 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 41/67] openobex: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 43/67] pcmanfm: " Spenser Gilliland
` (25 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/pango/Config.in | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/package/pango/Config.in b/package/pango/Config.in
index 6c8a160..845ea98 100644
--- a/package/pango/Config.in
+++ b/package/pango/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_PANGO
bool "pango"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
depends on BR2_INSTALL_LIBSTDCPP # freetype support
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_EXPAT
@@ -18,5 +19,6 @@ config BR2_PACKAGE_PANGO
http://www.pango.org/
-comment "pango requires a toolchain with WCHAR and C++ support"
- depends on !BR2_USE_WCHAR || !BR2_INSTALL_LIBSTDCPP
+comment "pango requires a toolchain with WCHAR, threading and C++ support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \
+ !BR2_INSTALL_LIBSTDCPP
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 43/67] pcmanfm: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (41 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 42/67] pango: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 44/67] pkg-config: " Spenser Gilliland
` (24 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/pcmanfm/Config.in | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/package/pcmanfm/Config.in b/package/pcmanfm/Config.in
index 484192b..5c80c10 100644
--- a/package/pcmanfm/Config.in
+++ b/package/pcmanfm/Config.in
@@ -2,6 +2,7 @@ config BR2_PACKAGE_PCMANFM
bool "pcmanfm"
depends on BR2_PACKAGE_XORG7
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_GAMIN
select BR2_PACKAGE_STARTUP_NOTIFICATION
select BR2_PACKAGE_XLIB_LIBX11
@@ -12,5 +13,6 @@ config BR2_PACKAGE_PCMANFM
http://internap.dl.sourceforge.net/sourceforge/pcmanfm
-comment "pcmanfm requires a toolchain with WCHAR support"
- depends on BR2_PACKAGE_XORG7 && !BR2_USE_WCHAR
+comment "pcmanfm requires a toolchain with WCHAR and threading support"
+ depends on BR2_PACKAGE_XORG7 && \
+ (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 44/67] pkg-config: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (42 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 43/67] pcmanfm: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 45/67] polkit: " Spenser Gilliland
` (23 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/pkg-config/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/pkg-config/Config.in b/package/pkg-config/Config.in
index 7f96d9b..bf702d0 100644
--- a/package/pkg-config/Config.in
+++ b/package/pkg-config/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_PKG_CONFIG
bool "pkg-config"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
depends on BR2_DEPRECATED
select BR2_PACKAGE_LIBGLIB2
help
@@ -11,5 +12,5 @@ config BR2_PACKAGE_PKG_CONFIG
http://www.freedesktop.org/software/pkgconfig/
-comment "pkg-config requires a toolchain with WCHAR support"
- depends on BR2_DEPRECATED && !BR2_USE_WCHAR
+comment "pkg-config requires a toolchain with WCHAR and threading support"
+ depends on BR2_DEPRECATED && (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 45/67] polkit: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (43 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 44/67] pkg-config: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 46/67] sconeserver: " Spenser Gilliland
` (22 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/polkit/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/polkit/Config.in b/package/polkit/Config.in
index b47022a..df6c767 100644
--- a/package/polkit/Config.in
+++ b/package/polkit/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_POLKIT
bool "polkit"
depends on BR2_USE_WCHAR # libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_EXPAT
help
@@ -10,5 +11,5 @@ config BR2_PACKAGE_POLKIT
http://www.freedesktop.org/wiki/Software/polkit
-comment "polkit requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "polkit requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 46/67] sconeserver: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (44 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 45/67] polkit: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 47/67] shared-mime-info: " Spenser Gilliland
` (21 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/sconeserver/Config.in | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/sconeserver/Config.in b/package/sconeserver/Config.in
index 60ae2ae..e9b51c0 100644
--- a/package/sconeserver/Config.in
+++ b/package/sconeserver/Config.in
@@ -42,7 +42,7 @@ config BR2_PACKAGE_SCONESERVER_BLUETOOTH
bool "bluetooth"
depends on BR2_USE_WCHAR # bluez->libglib2
depends on BR2_USE_MMU # bluez->dbus
- depends on BR2_TOOLCHAIN_HAS_THREADS # bluez->dbus
+ depends on BR2_TOOLCHAIN_HAS_THREADS # bluez->dbus, bluez->libglib2
depends on !BR2_avr32 # bluez_utils
select BR2_PACKAGE_BLUEZ_UTILS
help
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 47/67] shared-mime-info: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (45 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 46/67] sconeserver: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 48/67] snowball-init: " Spenser Gilliland
` (20 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/shared-mime-info/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/shared-mime-info/Config.in b/package/shared-mime-info/Config.in
index b08c1fd..ee635ac 100644
--- a/package/shared-mime-info/Config.in
+++ b/package/shared-mime-info/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_SHARED_MIME_INFO
bool "shared-mime-info"
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_LIBXML2
help
@@ -10,5 +11,5 @@ config BR2_PACKAGE_SHARED_MIME_INFO
http://freedesktop.org/wiki/Software/shared-mime-info
-comment "shared-mime-info requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "shared-mime-info requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 48/67] snowball-init: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (46 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 47/67] shared-mime-info: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 49/67] sshfs: " Spenser Gilliland
` (19 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/snowball-init/Config.in | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/package/snowball-init/Config.in b/package/snowball-init/Config.in
index 99abb35..33d3fa0 100644
--- a/package/snowball-init/Config.in
+++ b/package/snowball-init/Config.in
@@ -4,7 +4,7 @@ config BR2_PACKAGE_SNOWBALL_INIT
select BR2_PACKAGE_BLUEZ_UTILS
depends on !BR2_avr32
depends on BR2_USE_WCHAR # libglib2
- depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib
+ depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib, libglib2
depends on BR2_USE_MMU # dbus
select BR2_PACKAGE_UX500_FIRMWARE
help
@@ -12,3 +12,6 @@ config BR2_PACKAGE_SNOWBALL_INIT
http://www.igloocommunity.org
+comment "snowball-init requires a toolchain with WCHAR, threading, and MMU support"
+ depends on !BR2_avr32 && \
+ (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_MMU)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 49/67] sshfs: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (47 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 48/67] snowball-init: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 50/67] sysprof: " Spenser Gilliland
` (18 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/sshfs/Config.in | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/sshfs/Config.in b/package/sshfs/Config.in
index b6d5aa6..3e7ed15 100644
--- a/package/sshfs/Config.in
+++ b/package/sshfs/Config.in
@@ -7,7 +7,7 @@ config BR2_PACKAGE_SSHFS
select BR2_PACKAGE_OPENSSH
depends on BR2_LARGEFILE
depends on BR2_USE_WCHAR # glib2
- depends on BR2_TOOLCHAIN_HAS_THREADS # libfuse
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libfuse, glib2
depends on BR2_USE_MMU # libfuse
depends on !BR2_PREFER_STATIC_LIB # libfuse
help
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 50/67] sysprof: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (48 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 49/67] sshfs: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 51/67] udev: " Spenser Gilliland
` (17 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
minor cleanups as well
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/sysprof/Config.in | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/package/sysprof/Config.in b/package/sysprof/Config.in
index 513a32c..d78062a 100644
--- a/package/sysprof/Config.in
+++ b/package/sysprof/Config.in
@@ -2,6 +2,7 @@ config BR2_PACKAGE_SYSPROF
bool "sysprof"
select BR2_PACKAGE_LIBGLIB2
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
# In its util.h file, sysprof contains architecture-specific
# code
depends on BR2_i386 || BR2_x86_64 || BR2_powerpc || BR2_sh4a || BR2_sh4aeb
@@ -11,14 +12,17 @@ config BR2_PACKAGE_SYSPROF
http://sysprof.com
+if BR2_PACKAGE_SYSPROF
+
config BR2_PACKAGE_SYSPROF_GUI
bool "sysprof GUI"
- depends on BR2_PACKAGE_SYSPROF
depends on BR2_PACKAGE_LIBGTK2
select BR2_PACKAGE_LIBGLADE
select BR2_PACKAGE_GDK_PIXBUF
help
GUI for the sysprof system-wide statistical profiler.
-comment "sysprof requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+endif
+
+comment "sysprof requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 51/67] udev: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (49 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 50/67] sysprof: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 52/67] udisks: " Spenser Gilliland
` (16 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/udev/Config.in | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/package/udev/Config.in b/package/udev/Config.in
index d3244d1..ed32c89 100644
--- a/package/udev/Config.in
+++ b/package/udev/Config.in
@@ -25,10 +25,15 @@ config BR2_PACKAGE_UDEV_ALL_EXTRAS
select BR2_PACKAGE_ACL
select BR2_PACKAGE_HWDATA
select BR2_PACKAGE_LIBGLIB2
+ depends on BR2_USE_WCHAR # libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2
help
Enable all extras with external dependencies like
libacl, hwdata and libglib2
+comment "enabling all extras requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_USE_THREADS
+
endif
comment "udev requires /dev mgmnt set to udev under System configuration"
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 52/67] udisks: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (50 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 51/67] udev: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 53/67] ussp-push: " Spenser Gilliland
` (15 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
minor cleanups
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/udisks/Config.in | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/package/udisks/Config.in b/package/udisks/Config.in
index a50b3ea..dca23ea 100644
--- a/package/udisks/Config.in
+++ b/package/udisks/Config.in
@@ -1,12 +1,13 @@
config BR2_PACKAGE_UDISKS
bool "udisks"
depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
- depends on BR2_TOOLCHAIN_HAS_THREADS
+ depends on BR2_TOOLCHAIN_HAS_THREADS # dbus-glib -> glib2
depends on BR2_USE_MMU # lvm2
select BR2_PACKAGE_UDEV
select BR2_PACKAGE_UDEV_ALL_EXTRAS
select BR2_PACKAGE_DBUS
select BR2_PACKAGE_DBUS_GLIB
+ depends on BR2_USE_WCHAR # dbus-glib -> glib2
select BR2_PACKAGE_SG3_UTILS
select BR2_PACKAGE_POLKIT
select BR2_PACKAGE_PARTED
@@ -24,12 +25,16 @@ config BR2_PACKAGE_UDISKS
http://www.freedesktop.org/wiki/Software/udisks
+if BR2_PACKAGE_UDISKS
+
config BR2_PACKAGE_UDISKS_LVM2
bool "lvm2 support"
- depends on BR2_PACKAGE_UDISKS
select BR2_PACKAGE_LVM2_APP_LIBRARY
help
Enable LVM2 support
-comment "udisks requires /dev mgmnt set to udev under System configuration"
- depends on !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+endif
+
+comment "udisks requires /dev mgmnt set to udev under System configuration and a toolchain with WCHAR and threading support"
+ depends on !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV || \
+ !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 53/67] ussp-push: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (51 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 52/67] udisks: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 54/67] vala: " Spenser Gilliland
` (14 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/ussp-push/Config.in | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/ussp-push/Config.in b/package/ussp-push/Config.in
index 716ce34..27c5a43 100644
--- a/package/ussp-push/Config.in
+++ b/package/ussp-push/Config.in
@@ -3,7 +3,7 @@ config BR2_PACKAGE_USSP_PUSH
depends on BR2_INET_IPV6
depends on !BR2_avr32
depends on BR2_USE_WCHAR # libglib2
- depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib
+ depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib, libglib2
depends on BR2_USE_MMU # dbus
select BR2_PACKAGE_OPENOBEX
select BR2_PACKAGE_OPENOBEX_BLUEZ
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 54/67] vala: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (52 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 53/67] ussp-push: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 55/67] webkit: " Spenser Gilliland
` (13 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/vala/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/vala/Config.in b/package/vala/Config.in
index 805c770..35c0257 100644
--- a/package/vala/Config.in
+++ b/package/vala/Config.in
@@ -3,6 +3,7 @@ config BR2_PACKAGE_VALA
# We no longer support a toolchain on the target
depends on BR2_DEPRECATED
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT_IF_LOCALE
select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
@@ -11,5 +12,5 @@ config BR2_PACKAGE_VALA
http://live.gnome.org/Vala
-comment "vala requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "vala requires a toolchain with WCHAR and threading support"
+ depends on BR2_DEPRECATED && (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 55/67] webkit: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (53 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 54/67] vala: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 56/67] wireshark: " Spenser Gilliland
` (12 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/webkit/Config.in | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/package/webkit/Config.in b/package/webkit/Config.in
index c6711b8..92cbc62 100644
--- a/package/webkit/Config.in
+++ b/package/webkit/Config.in
@@ -1,7 +1,8 @@
config BR2_PACKAGE_WEBKIT
bool "webkit"
depends on BR2_INSTALL_LIBSTDCPP
- depends on BR2_USE_WCHAR
+ depends on BR2_USE_WCHAR # enchant -> libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # enchant -> libglib2
depends on BR2_PACKAGE_LIBGTK2
select BR2_PACKAGE_ICU
select BR2_PACKAGE_LIBCURL
@@ -22,5 +23,6 @@ config BR2_PACKAGE_WEBKIT
http://webkit.org/
-comment "webkit requires C++, WCHAR in toolchain and libgtk2"
- depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || !BR2_PACKAGE_LIBGTK2
+comment "webkit requires libgtk2 and a toolchain with C++, WCHAR, threading support"
+ depends on BR2_PACKAGE_LIBGTK2 || !BR2_INSTALL_LIBSTDCPP || \
+ !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 56/67] wireshark: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (54 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 55/67] webkit: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 57/67] gst-plugin-x170: " Spenser Gilliland
` (11 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/wireshark/Config.in | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/package/wireshark/Config.in b/package/wireshark/Config.in
index d4c8b43..bc15bd2 100644
--- a/package/wireshark/Config.in
+++ b/package/wireshark/Config.in
@@ -5,11 +5,12 @@ config BR2_PACKAGE_WIRESHARK
select BR2_PACKAGE_LIBGLIB2
depends on BR2_USE_MMU # fork()
depends on BR2_USE_WCHAR # glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
help
Network traffic sniffer and protocol decoder. Currently only tshark,
the console interface, is enabled.
http://www.wireshark.org
-comment "wireshark requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "wireshark requires a MMU and a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_MMU || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 57/67] gst-plugin-x170: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (55 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 56/67] wireshark: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 58/67] gst-plugins-bad: " Spenser Gilliland
` (10 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/multimedia/gst-plugin-x170/Config.in | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/package/multimedia/gst-plugin-x170/Config.in b/package/multimedia/gst-plugin-x170/Config.in
index 9a1ae63..142367b 100644
--- a/package/multimedia/gst-plugin-x170/Config.in
+++ b/package/multimedia/gst-plugin-x170/Config.in
@@ -2,6 +2,7 @@ config BR2_PACKAGE_GST_PLUGIN_X170
bool "gst-plugin-x170"
depends on BR2_PACKAGE_GSTREAMER
depends on BR2_arm926t
+ # glibc toolchain includes WCHAR and threading for libglib2
depends on BR2_TOOLCHAIN_USES_GLIBC # on2-8170-libs
select BR2_PACKAGE_ON2_8170_LIBS
help
@@ -9,3 +10,6 @@ config BR2_PACKAGE_GST_PLUGIN_X170
ATMEL AT91SAM9M10 SoC.
http://www.at91.com/linux4sam/bin/view/Linux4SAM/SAM9M10Gstreamer
+
+comment "gst-plugin-x170 requires a toolchain which uses eglibc/glibc"
+ depends on BR2_PACKAGE_GSTREAMER && BR2_arm926t && !BR2_TOOLCHAIN_USES_GLIBC
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 58/67] gst-plugins-bad: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (56 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 57/67] gst-plugin-x170: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 59/67] gst-plugins-base: " Spenser Gilliland
` (9 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/multimedia/gst-plugins-bad/Config.in | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/package/multimedia/gst-plugins-bad/Config.in b/package/multimedia/gst-plugins-bad/Config.in
index 2271036..3c5c161 100644
--- a/package/multimedia/gst-plugins-bad/Config.in
+++ b/package/multimedia/gst-plugins-bad/Config.in
@@ -277,8 +277,13 @@ config BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_FAAD
config BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_LIBMMS
bool "libmms"
+ depends on BR2_USE_WCHAR # libmms -> libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libmms -> libglib2
select BR2_PACKAGE_LIBMMS
+comment "libmms requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
+
config BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_MUSEPACK
bool "musepack"
select BR2_PACKAGE_MUSEPACK
@@ -294,10 +299,13 @@ config BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_OPUS
config BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_RSVG
bool "rsvg"
depends on BR2_INSTALL_LIBSTDCPP
+ depends on BR2_USE_WCHAR # librsvg -> libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # librsvg -> libglib2
select BR2_PACKAGE_LIBRSVG
-comment "rsvg plugin requires a toolchain with C++ support"
- depends on !BR2_INSTALL_LIBSTDCPP
+comment "rsvg plugin requires a toolchain with C++, WCHAR, and threading support"
+ depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
+ !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_SDL
bool "sdl"
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 59/67] gst-plugins-base: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (57 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 58/67] gst-plugins-bad: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 60/67] gst-plugins-good: " Spenser Gilliland
` (8 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/multimedia/gst-plugins-base/Config.in | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/package/multimedia/gst-plugins-base/Config.in b/package/multimedia/gst-plugins-base/Config.in
index af4fe8c..7370bd6 100644
--- a/package/multimedia/gst-plugins-base/Config.in
+++ b/package/multimedia/gst-plugins-base/Config.in
@@ -86,10 +86,13 @@ config BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_OGG
config BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_PANGO
bool "pango font renderer"
depends on BR2_INSTALL_LIBSTDCPP
+ depends on BR2_USE_WCHAR # pango -> libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # pango -> libglib2
select BR2_PACKAGE_PANGO
-comment "pango plugin requires a toolchain with C++ support"
- depends on !BR2_INSTALL_LIBSTDCPP
+comment "pango plugin requires a toolchain with C++, WCHAR and threading support "
+ depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
+ !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_THEORA
bool "theora (*.ogg video)"
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 60/67] gst-plugins-good: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (58 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 59/67] gst-plugins-base: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 61/67] gst1-plugins-good: " Spenser Gilliland
` (7 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/multimedia/gst-plugins-good/Config.in | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/package/multimedia/gst-plugins-good/Config.in b/package/multimedia/gst-plugins-good/Config.in
index 978aa0b..da709db 100644
--- a/package/multimedia/gst-plugins-good/Config.in
+++ b/package/multimedia/gst-plugins-good/Config.in
@@ -188,8 +188,13 @@ config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_FLAC
config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_GDKPIXBUF
bool "gdkpixbuf"
+ depends on BR2_USE_WCHAR # gdk-pixbuf -> libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # gdk-pixbuf -> libglib2
select BR2_PACKAGE_GDK_PIXBUF
+comment "gdkpixbuf requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
+
config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_OSS
bool "ossaudio (OSS audio)"
@@ -204,8 +209,13 @@ config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_PULSE
config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_SOUPHTTPSRC
bool "souphttpsrc (http client)"
+ depends on BR2_USE_WCHAR # libsoup -> glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libsoup -> glib2
select BR2_PACKAGE_LIBSOUP
+comment "souphttsrc requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREAD
+
config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_SPEEX
bool "speex"
select BR2_PACKAGE_SPEEX
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 61/67] gst1-plugins-good: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (59 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 60/67] gst-plugins-good: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 62/67] gst1-plugins-base: " Spenser Gilliland
` (6 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/multimedia/gst1-plugins-good/Config.in | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/package/multimedia/gst1-plugins-good/Config.in b/package/multimedia/gst1-plugins-good/Config.in
index e579539..8031a63 100644
--- a/package/multimedia/gst1-plugins-good/Config.in
+++ b/package/multimedia/gst1-plugins-good/Config.in
@@ -288,9 +288,14 @@ config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_FLAC
config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_GDKPIXBUF
bool "gdkpixbuf"
select BR2_PACKAGE_GDK_PIXBUF
+ depends on BR2_USE_WCHAR # gdk-pixbuf -> libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # gdk-pixbuf -> libglib2
help
GdkPixbuf-based image decoder, overlay and sink
+comment "gdkpixbuf requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
+
config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_PULSE
depends on BR2_TOOLCHAIN_HAS_THREADS # pulseaudio
depends on BR2_LARGEFILE # pulseaudio -> libsndfile
@@ -301,10 +306,15 @@ config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_PULSE
config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_SOUPHTTPSRC
bool "souphttpsrc (http client)"
+ depends on BR2_USE_WCHAR # libsoup -> glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libsoup -> glib2
select BR2_PACKAGE_LIBSOUP
help
libsoup HTTP client src/sink
+comment "souphttpsrc requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
+
config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_SPEEX
bool "speex"
select BR2_PACKAGE_SPEEX
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 62/67] gst1-plugins-base: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (60 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 61/67] gst1-plugins-good: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 63/67] gst1-plugins-bad: " Spenser Gilliland
` (5 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/multimedia/gst1-plugins-base/Config.in | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/package/multimedia/gst1-plugins-base/Config.in b/package/multimedia/gst1-plugins-base/Config.in
index 10561c1..e02d23a 100644
--- a/package/multimedia/gst1-plugins-base/Config.in
+++ b/package/multimedia/gst1-plugins-base/Config.in
@@ -130,12 +130,15 @@ config BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_OGG
config BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_PANGO
bool "pango font renderer"
depends on BR2_INSTALL_LIBSTDCPP
+ depends on BR2_USE_WCHAR # pango -> libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # pango -> libglib2
select BR2_PACKAGE_PANGO
help
Pango-based text rendering and overlay
-comment "pango plugin requires a toolchain with C++ support"
- depends on !BR2_INSTALL_LIBSTDCPP
+comment "pango plugin requires a toolchain with C++, WCHAR and threading support"
+ depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
+ !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_THEORA
bool "theora (*.ogg video)"
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 63/67] gst1-plugins-bad: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (61 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 62/67] gst1-plugins-base: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 64/67] gstreamer: " Spenser Gilliland
` (4 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/multimedia/gst1-plugins-bad/Config.in | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/package/multimedia/gst1-plugins-bad/Config.in b/package/multimedia/gst1-plugins-bad/Config.in
index 98550e0..878bf53 100644
--- a/package/multimedia/gst1-plugins-bad/Config.in
+++ b/package/multimedia/gst1-plugins-bad/Config.in
@@ -372,10 +372,15 @@ config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_FBDEV
config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_LIBMMS
bool "libmms"
+ depends on BR2_USE_WCHAR # libmms -> libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libmms -> libglib2
select BR2_PACKAGE_LIBMMS
help
Microsoft Multi Media Server streaming protocol support
+comment "libmms requires a toolchain with WCHAR and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREAD
+
config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_MPEG2ENC
bool "mpeg2enc"
select BR2_PACKAGE_LIBMPEG2
@@ -417,12 +422,15 @@ config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_OPUS
config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_RSVG
bool "rsvg"
depends on BR2_INSTALL_LIBSTDCPP
+ depends on BR2_USE_WCHAR # librsvg -> glib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # librsvg -> glib2
select BR2_PACKAGE_LIBRSVG
help
RSVG plugin library
-comment "rsvg plugin requires a toolchain with C++ support"
- depends on !BR2_INSTALL_LIBSTDCPP
+comment "rsvg plugin requires a toolchain with C++, WCHAR and threading support"
+ depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
+ !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_EGLGLES
bool "eglgles"
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 64/67] gstreamer: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (62 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 63/67] gst1-plugins-bad: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 65/67] gstreamer1: " Spenser Gilliland
` (3 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/multimedia/gstreamer/Config.in | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/multimedia/gstreamer/Config.in b/package/multimedia/gstreamer/Config.in
index d2f99da..5188b8f 100644
--- a/package/multimedia/gstreamer/Config.in
+++ b/package/multimedia/gstreamer/Config.in
@@ -1,7 +1,7 @@
config BR2_PACKAGE_GSTREAMER
bool "gstreamer"
depends on BR2_USE_WCHAR # glib2
- depends on BR2_TOOLCHAIN_HAS_THREADS
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
help
GStreamer is an open source multimedia framework.
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 65/67] gstreamer1: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (63 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 64/67] gstreamer: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 66/67] mpd: " Spenser Gilliland
` (2 subsequent siblings)
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/multimedia/gstreamer1/Config.in | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/multimedia/gstreamer1/Config.in b/package/multimedia/gstreamer1/Config.in
index 627814c..69a87f3 100644
--- a/package/multimedia/gstreamer1/Config.in
+++ b/package/multimedia/gstreamer1/Config.in
@@ -1,7 +1,7 @@
config BR2_PACKAGE_GSTREAMER1
bool "gstreamer1"
depends on BR2_USE_WCHAR # glib2
- depends on BR2_TOOLCHAIN_HAS_THREADS
+ depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
select BR2_PACKAGE_LIBGLIB2
help
GStreamer is an open source multimedia framework. This 1.x version of
@@ -49,5 +49,5 @@ config BR2_PACKAGE_GSTREAMER1_INSTALL_TOOLS
endif
-comment "gstreamer1 requires a toolchain with WCHAR and threads support"
+comment "gstreamer1 requires a toolchain with WCHAR and threading support"
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 66/67] mpd: libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (64 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 65/67] gstreamer1: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 67/67] libglib2: needs threads Spenser Gilliland
2013-07-27 21:41 ` [Buildroot] [PATCH 00/67] libglib2 requires threads Thomas Petazzoni
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/multimedia/mpd/Config.in | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/package/multimedia/mpd/Config.in b/package/multimedia/mpd/Config.in
index 6e5c690..2ca55cc 100644
--- a/package/multimedia/mpd/Config.in
+++ b/package/multimedia/mpd/Config.in
@@ -1,7 +1,8 @@
menuconfig BR2_PACKAGE_MPD
bool "mpd"
depends on BR2_INSTALL_LIBSTDCPP
- depends on BR2_USE_WCHAR
+ depends on BR2_USE_WCHAR # libglib2
+ depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2
select BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
select BR2_PACKAGE_MPD_TREMOR if !(BR2_PACKAGE_MPD_MAD || BR2_PACKAGE_MPD_MPG123 || BR2_PACKAGE_MPD_VORBIS || BR2_PACKAGE_MPD_WAVPACK || BR2_PACKAGE_MPD_FLAC || BR2_PACKAGE_MPD_MUSEPACK || BR2_PACKAGE_MPD_FFMPEG)
@@ -181,5 +182,6 @@ config BR2_PACKAGE_MPD_WAVPACK
endif
-comment "mpd requires a toolchain with C++ and WCHAR support"
- depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR
+comment "mpd requires a toolchain with C++, threading and WCHAR support"
+ depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
+ !BR2_TOOLCHAIN_HAS_THREADS
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 67/67] libglib2: needs threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (65 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 66/67] mpd: " Spenser Gilliland
@ 2013-07-15 19:47 ` Spenser Gilliland
2013-07-27 21:41 ` [Buildroot] [PATCH 00/67] libglib2 requires threads Thomas Petazzoni
67 siblings, 0 replies; 71+ messages in thread
From: Spenser Gilliland @ 2013-07-15 19:47 UTC (permalink / raw)
To: buildroot
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
package/libglib2/Config.in | 5 ++--
...ib2-0002-fix-build-when-no-thread-support.patch | 30 ----------------------
2 files changed, 3 insertions(+), 32 deletions(-)
delete mode 100644 package/libglib2/libglib2-0002-fix-build-when-no-thread-support.patch
diff --git a/package/libglib2/Config.in b/package/libglib2/Config.in
index 5282885..806dbbe 100644
--- a/package/libglib2/Config.in
+++ b/package/libglib2/Config.in
@@ -5,10 +5,11 @@ config BR2_PACKAGE_LIBGLIB2
select BR2_PACKAGE_LIBFFI
select BR2_PACKAGE_ZLIB
depends on BR2_USE_WCHAR # gettext
+ depends on BR2_TOOLCHAIN_HAS_THREADS
help
Low-level core library that forms the basis of GTK+ and GNOME.
http://www.gtk.org/
-comment "libglib2 requires a toolchain with WCHAR support"
- depends on !BR2_USE_WCHAR
+comment "libglib2 requires a toolchain with WCHAR support and threading support"
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/libglib2/libglib2-0002-fix-build-when-no-thread-support.patch b/package/libglib2/libglib2-0002-fix-build-when-no-thread-support.patch
deleted file mode 100644
index 43c7e16..0000000
--- a/package/libglib2/libglib2-0002-fix-build-when-no-thread-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-Fix gio/gcancellable.c build when thread support is disabled
-
-Changes:
- Updated for 2.36.1
-
-Signed-off-by: "Samuel Martin" <s.martin49@gmail.com>
-Signed-off-by: "Spenser Gilliland" <spenser@gillilanding.com>
----
---- libglib2-2.36.1.orig/gio/gcancellable.c 2013-03-13 08:39:09.000000000 -0500
-+++ libglib2-2.36.1/gio/gcancellable.c 2013-05-26 10:49:32.366019891 -0500
-@@ -267,7 +267,9 @@
- while (priv->cancelled_running)
- {
- priv->cancelled_running_waiting = TRUE;
-+#if defined(G_THREADS_ENABLED)
- g_cond_wait (&cancellable_cond, &cancellable_mutex);
-+#endif
- }
-
- if (priv->cancelled)
-@@ -620,7 +622,9 @@
- while (priv->cancelled_running)
- {
- priv->cancelled_running_waiting = TRUE;
-+#if defined(G_THREADS_ENABLED)
- g_cond_wait (&cancellable_cond, &cancellable_mutex);
-+#endif
- }
-
- g_signal_handler_disconnect (cancellable, handler_id);
--
1.8.1.2
^ permalink raw reply related [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 23/67] libgail: libglib2 requires threads
2013-07-15 19:47 ` [Buildroot] [PATCH 23/67] libgail: " Spenser Gilliland
@ 2013-07-16 8:16 ` Thomas Petazzoni
0 siblings, 0 replies; 71+ messages in thread
From: Thomas Petazzoni @ 2013-07-16 8:16 UTC (permalink / raw)
To: buildroot
Dear Spenser Gilliland,
On Mon, 15 Jul 2013 14:47:06 -0500, Spenser Gilliland wrote:
>
> Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
> ---
> package/libgail/Config.in | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/package/libgail/Config.in b/package/libgail/Config.in
> index ba74795..3e1af62 100644
> --- a/package/libgail/Config.in
> +++ b/package/libgail/Config.in
> @@ -1,5 +1,7 @@
> config BR2_PACKAGE_LIBGAIL
> bool "libgail"
> + depends on BR2_USE_WCHAR # pango -> libglib2
> + depends on BR2_TOOLCHAIN_HAS_THREADS # pango -> libglib2
> depends on BR2_PACKAGE_LIBGTK2
> select BR2_PACKAGE_PANGO
> help
> @@ -16,3 +18,7 @@ config BR2_PACKAGE_LIBGAIL
> program.
>
> http://developer.gnome.org/projects/gap
> +
> +comment "libgail requires a toolchain with WCHAR and threading support"
> + depends on BR2_PACKAGE_LIBGTK2 && \
> + (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
This one doesn't seem useful: the libgail package already has a
dependency on libgtk2, so it can't be enabled if gtk2 is not enabled.
And gtk2 can only be enabled if wchar and threads are available.
So this patch is not useful.
Remember: propagation of "depends on" is needed from package A to
package B when package B selects package A. If package B depends on
package A, then there's no point in propagating the "depends on" of
package A to package B.
More aspirin? :-)
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 24/67] libglade: libglib2 requires threads
2013-07-15 19:47 ` [Buildroot] [PATCH 24/67] libglade: " Spenser Gilliland
@ 2013-07-16 8:17 ` Thomas Petazzoni
0 siblings, 0 replies; 71+ messages in thread
From: Thomas Petazzoni @ 2013-07-16 8:17 UTC (permalink / raw)
To: buildroot
Dear Spenser Gilliland,
On Mon, 15 Jul 2013 14:47:07 -0500, Spenser Gilliland wrote:
>
> Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
> ---
> package/libglade/Config.in | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/package/libglade/Config.in b/package/libglade/Config.in
> index f7a9a1c..d042517 100644
> --- a/package/libglade/Config.in
> +++ b/package/libglade/Config.in
> @@ -2,6 +2,7 @@ config BR2_PACKAGE_LIBGLADE
> bool "libglade"
> depends on BR2_PACKAGE_LIBGTK2
> depends on BR2_USE_WCHAR # glib2
> + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
> select BR2_PACKAGE_LIBGLIB2
> select BR2_PACKAGE_ATK
> select BR2_PACKAGE_LIBXML2
> @@ -12,5 +13,6 @@ config BR2_PACKAGE_LIBGLADE
>
> http://ftp.gnome.org/pub/GNOME/sources/libglade/
>
> -comment "libglade requires a toolchain with WCHAR support"
> - depends on BR2_PACKAGE_LIBGTK2 && !BR2_USE_WCHAR
> +comment "libglade requires a toolchain with WCHAR and threading support"
> + depends on BR2_PACKAGE_LIBGTK2 && \
> + (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
I also believe this one is not needed, because there is already a
"depends on BR2_PACKAGE_LIBGTK2".
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 71+ messages in thread
* [Buildroot] [PATCH 00/67] libglib2 requires threads
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
` (66 preceding siblings ...)
2013-07-15 19:47 ` [Buildroot] [PATCH 67/67] libglib2: needs threads Spenser Gilliland
@ 2013-07-27 21:41 ` Thomas Petazzoni
67 siblings, 0 replies; 71+ messages in thread
From: Thomas Petazzoni @ 2013-07-27 21:41 UTC (permalink / raw)
To: buildroot
Dear Spenser Gilliland,
On Mon, 15 Jul 2013 14:46:43 -0500, Spenser Gilliland wrote:
> This patch removes support for an un-threaded version of libglib2. There were
> minor cleanups and some bug fixes to various Config.in as well.
>
> See autobuilder failures
>
> http://autobuild.buildroot.net/results/d1fb882fe4d22a17bdd438360da515011dda2b30/build-end.log?
> http://autobuild.buildroot.net/results/b66e807769ead5caa3e3b6312e9f7c35c14eafe7/build-end.log?
> http://autobuild.buildroot.net/results/9c3fa0c5003a6369e70bfe6d611f7d745742a8c7/build-end.log?
I've committed this patch set, after squashing all the patches (except
the avahi minor cleanup patch) into one and doing a few minor fixes.
Thanks!
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 71+ messages in thread
end of thread, other threads:[~2013-07-27 21:41 UTC | newest]
Thread overview: 71+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-15 19:46 [Buildroot] [PATCH 00/67] libglib2 requires threads Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 01/67] atk: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 02/67] bluez_utils: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 03/67] bustle: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 04/67] connman: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 05/67] avahi: minor cleanup Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 06/67] curlftpfs: libglib2 requires threads Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 07/67] dbus-glib: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 08/67] dbus-python: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 09/67] docker: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 10/67] libedbus: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 11/67] libevas-generic-loaders: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 12/67] enchant: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 13/67] enlightenment: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 14/67] gamin: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 15/67] gdk-pixbuf: " Spenser Gilliland
2013-07-15 19:46 ` [Buildroot] [PATCH 16/67] glib-networking: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 17/67] glibmm: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 18/67] gmpc: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 19/67] gob2: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 20/67] gvfs: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 21/67] json-glib: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 22/67] latencytop: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 23/67] libgail: " Spenser Gilliland
2013-07-16 8:16 ` Thomas Petazzoni
2013-07-15 19:47 ` [Buildroot] [PATCH 24/67] libglade: " Spenser Gilliland
2013-07-16 8:17 ` Thomas Petazzoni
2013-07-15 19:47 ` [Buildroot] [PATCH 25/67] libgtk2: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 26/67] libmms: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 27/67] libmpd: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 28/67] libplayer: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 29/67] libqmi: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 30/67] librsvg: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 31/67] libsoup: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 32/67] libxmlpp: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 33/67] lttng-babeltrace: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 34/67] midori: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 35/67] nbd: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 36/67] neard: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 37/67] neardal: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 38/67] network-manager: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 39/67] ofono: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 40/67] opencv: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 41/67] openobex: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 42/67] pango: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 43/67] pcmanfm: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 44/67] pkg-config: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 45/67] polkit: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 46/67] sconeserver: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 47/67] shared-mime-info: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 48/67] snowball-init: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 49/67] sshfs: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 50/67] sysprof: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 51/67] udev: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 52/67] udisks: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 53/67] ussp-push: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 54/67] vala: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 55/67] webkit: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 56/67] wireshark: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 57/67] gst-plugin-x170: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 58/67] gst-plugins-bad: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 59/67] gst-plugins-base: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 60/67] gst-plugins-good: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 61/67] gst1-plugins-good: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 62/67] gst1-plugins-base: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 63/67] gst1-plugins-bad: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 64/67] gstreamer: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 65/67] gstreamer1: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 66/67] mpd: " Spenser Gilliland
2013-07-15 19:47 ` [Buildroot] [PATCH 67/67] libglib2: needs threads Spenser Gilliland
2013-07-27 21:41 ` [Buildroot] [PATCH 00/67] libglib2 requires threads Thomas Petazzoni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.