All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4] dfu, nand, ubi: add partubi alt settings for updating ubi partition
Date: Fri, 19 Jul 2013 06:32:14 +0200	[thread overview]
Message-ID: <1374208334-16382-1-git-send-email-hs@denx.de> (raw)
In-Reply-To: <1374127495-31162-1-git-send-email-hs@denx.de>

updating an ubi partition needs a completely erased mtd partition,
see:
http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html

So, add partubi alt setting for the dfu_alt_info environment
variable to mark this partition as an ubi partition. In case we
update an ubi partition, we erase after flashing the image into the
partition, the remaining sektors.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Tom Rini <trini@ti.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>

---

- This patch is also a good starting point to fix up updating ubi, as
  we currently use "nand erase" for erasing the sektors. This is
  not the prefered way for writing an ubi image, see:
  http://www.linux-mtd.infradead.org/faq/ubi.html#L_flash_img

  This must be fixed ... we have no "ubiformat" in u-boot, or?

- changes for v2:
  - do not use spread = 1 for nand_erase_opts, to prevent
    errormessage if there are bad blocks in the erase range.

- changes for v3:
  - add comment from Marek Vasut:
    - prevent losing memory
  - added comment from Lukasz Majewski:
    - move code to dfu_nand.c dfu_flush_medium_nand()

- changes for v4:
  - add comment from Lukasz Majewski:
    - move ubi var to internal struct struct nand_internal_data
---
 drivers/dfu/dfu_nand.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++
 include/dfu.h          |  2 ++
 2 Dateien ge?ndert, 60 Zeilen hinzugef?gt(+)

diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c
index 07dee89..c0f8adf 100644
--- a/drivers/dfu/dfu_nand.c
+++ b/drivers/dfu/dfu_nand.c
@@ -148,11 +148,43 @@ static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf,
 	return ret;
 }
 
+static int dfu_flush_medium_nand(struct dfu_entity *dfu)
+{
+	int ret = 0;
+
+	/* in case of ubi partition, erase rest of the partition */
+	if (dfu->data.nand.ubi) {
+		nand_info_t *nand;
+		nand_erase_options_t opts;
+
+		if (nand_curr_device < 0 ||
+		    nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
+		    !nand_info[nand_curr_device].name) {
+			printf("%s: invalid nand device\n", __func__);
+			return -1;
+		}
+
+		nand = &nand_info[nand_curr_device];
+
+		memset(&opts, 0, sizeof(opts));
+		opts.offset = dfu->data.nand.start + dfu->offset +
+				dfu->bad_skip;
+		opts.length = dfu->data.nand.start +
+				dfu->data.nand.size - opts.offset;
+		ret = nand_erase_opts(nand, &opts);
+		if (ret != 0)
+			printf("Failure erase: %d\n", ret);
+	}
+
+	return ret;
+}
+
 int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s)
 {
 	char *st;
 	int ret, dev, part;
 
+	dfu->data.nand.ubi = 0;
 	dfu->dev_type = DFU_DEV_NAND;
 	st = strsep(&s, " ");
 	if (!strcmp(st, "raw")) {
@@ -185,7 +217,32 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s)
 
 		dfu->data.nand.start = pi->offset;
 		dfu->data.nand.size = pi->size;
+	} else if (!strcmp(st, "partubi")) {
+		char mtd_id[32];
+		struct mtd_device *mtd_dev;
+		u8 part_num;
+		struct part_info *pi;
 
+		dfu->layout = DFU_RAW_ADDR;
+
+		dev = simple_strtoul(s, &s, 10);
+		s++;
+		part = simple_strtoul(s, &s, 10);
+
+		sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1);
+		printf("using id '%s'\n", mtd_id);
+
+		mtdparts_init();
+
+		ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi);
+		if (ret != 0) {
+			printf("Could not locate '%s'\n", mtd_id);
+			return -1;
+		}
+
+		dfu->data.nand.start = pi->offset;
+		dfu->data.nand.size = pi->size;
+		dfu->data.nand.ubi = 1;
 	} else {
 		printf("%s: Memory layout (%s) not supported!\n", __func__, st);
 		return -1;
@@ -193,6 +250,7 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s)
 
 	dfu->read_medium = dfu_read_medium_nand;
 	dfu->write_medium = dfu_write_medium_nand;
+	dfu->flush_medium = dfu_flush_medium_nand;
 
 	/* initial state */
 	dfu->inited = 0;
diff --git a/include/dfu.h b/include/dfu.h
index 124653c..4de7b34 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -59,6 +59,8 @@ struct nand_internal_data {
 
 	unsigned int dev;
 	unsigned int part;
+	/* for nand/ubi use */
+	unsigned int ubi;
 };
 
 static inline unsigned int get_mmc_blk_size(int dev)
-- 
1.7.11.7

  parent reply	other threads:[~2013-07-19  4:32 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-15  9:49 [U-Boot] [PATCH 1/2] dfu, nand, ubi: add partubi alt settings for updating ubi partition Heiko Schocher
2013-07-16  4:54 ` [U-Boot] [PATCH v2] " Heiko Schocher
2013-07-16  5:00   ` Marek Vasut
2013-07-16  5:11     ` Heiko Schocher
2013-07-16  7:41   ` Lukasz Majewski
2013-07-16  8:01     ` Heiko Schocher
2013-07-16  8:19       ` Lukasz Majewski
2013-07-16 15:14   ` Tom Rini
2013-07-16 15:43     ` Heiko Schocher
2013-07-17 22:35   ` Scott Wood
2013-07-18  5:01     ` Heiko Schocher
2013-07-18  6:04   ` [U-Boot] [PATCH v3] " Heiko Schocher
2013-07-18  6:57     ` Lukasz Majewski
2013-07-22 21:08       ` Scott Wood
2013-07-19  4:32     ` Heiko Schocher [this message]
2013-07-19  6:45       ` [U-Boot] [PATCH v4] " Lukasz Majewski
2013-07-19 13:54         ` Marek Vasut
2013-07-22 21:24       ` Scott Wood
2013-07-23 13:12         ` Heiko Schocher
2013-07-23 23:13           ` Scott Wood
2013-07-23 23:22       ` Scott Wood
2013-07-24  4:30         ` Heiko Schocher
2013-07-24 19:08           ` Scott Wood
2013-07-25  4:34             ` Heiko Schocher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1374208334-16382-1-git-send-email-hs@denx.de \
    --to=hs@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.