* [PATCH v4 0/2] support hisilicon i2c
@ 2013-07-26 13:22 ` Zhangfei Gao
0 siblings, 0 replies; 12+ messages in thread
From: Zhangfei Gao @ 2013-07-26 13:22 UTC (permalink / raw)
To: Wolfram Sang, Baruch Siach
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, Zhangfei Gao
V4:
resend for 3.11
v3:
patch 02, use size instead of threshold
v2:
Suggested by Baruch
Support hisilicon i2c in i2c-designware-platdrv.c, and adding two optional properties
Zhangfei Gao (2):
i2c: designware: use module_platform_driver
i2c: designware: add two optional property tx/rx-fifo-size
.../devicetree/bindings/i2c/i2c-designware.txt | 7 +++++++
drivers/i2c/busses/i2c-designware-platdrv.c | 17 +++++------------
2 files changed, 12 insertions(+), 12 deletions(-)
--
1.7.9.5
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 0/2] support hisilicon i2c
@ 2013-07-26 13:22 ` Zhangfei Gao
0 siblings, 0 replies; 12+ messages in thread
From: Zhangfei Gao @ 2013-07-26 13:22 UTC (permalink / raw)
To: linux-arm-kernel
V4:
resend for 3.11
v3:
patch 02, use size instead of threshold
v2:
Suggested by Baruch
Support hisilicon i2c in i2c-designware-platdrv.c, and adding two optional properties
Zhangfei Gao (2):
i2c: designware: use module_platform_driver
i2c: designware: add two optional property tx/rx-fifo-size
.../devicetree/bindings/i2c/i2c-designware.txt | 7 +++++++
drivers/i2c/busses/i2c-designware-platdrv.c | 17 +++++------------
2 files changed, 12 insertions(+), 12 deletions(-)
--
1.7.9.5
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 1/2] i2c: designware: use module_platform_driver
2013-07-26 13:22 ` Zhangfei Gao
@ 2013-07-26 13:22 ` Zhangfei Gao
-1 siblings, 0 replies; 12+ messages in thread
From: Zhangfei Gao @ 2013-07-26 13:22 UTC (permalink / raw)
To: Wolfram Sang, Baruch Siach
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, Zhangfei Gao
Instead of use platform_driver_probe, use module_platform_driver
To support deferred probing
Also subsys_initcall may too early to auto set pinctl
Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Baruch Siach <baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
---
drivers/i2c/busses/i2c-designware-platdrv.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 4c5fada..36ceebc 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -236,6 +236,7 @@ static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume);
MODULE_ALIAS("platform:i2c_designware");
static struct platform_driver dw_i2c_driver = {
+ .probe = dw_i2c_probe,
.remove = dw_i2c_remove,
.driver = {
.name = "i2c_designware",
@@ -245,18 +246,7 @@ static struct platform_driver dw_i2c_driver = {
.pm = &dw_i2c_dev_pm_ops,
},
};
-
-static int __init dw_i2c_init_driver(void)
-{
- return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe);
-}
-subsys_initcall(dw_i2c_init_driver);
-
-static void __exit dw_i2c_exit_driver(void)
-{
- platform_driver_unregister(&dw_i2c_driver);
-}
-module_exit(dw_i2c_exit_driver);
+module_platform_driver(dw_i2c_driver);
MODULE_AUTHOR("Baruch Siach <baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>");
MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v4 1/2] i2c: designware: use module_platform_driver
@ 2013-07-26 13:22 ` Zhangfei Gao
0 siblings, 0 replies; 12+ messages in thread
From: Zhangfei Gao @ 2013-07-26 13:22 UTC (permalink / raw)
To: linux-arm-kernel
Instead of use platform_driver_probe, use module_platform_driver
To support deferred probing
Also subsys_initcall may too early to auto set pinctl
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
---
drivers/i2c/busses/i2c-designware-platdrv.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 4c5fada..36ceebc 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -236,6 +236,7 @@ static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume);
MODULE_ALIAS("platform:i2c_designware");
static struct platform_driver dw_i2c_driver = {
+ .probe = dw_i2c_probe,
.remove = dw_i2c_remove,
.driver = {
.name = "i2c_designware",
@@ -245,18 +246,7 @@ static struct platform_driver dw_i2c_driver = {
.pm = &dw_i2c_dev_pm_ops,
},
};
-
-static int __init dw_i2c_init_driver(void)
-{
- return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe);
-}
-subsys_initcall(dw_i2c_init_driver);
-
-static void __exit dw_i2c_exit_driver(void)
-{
- platform_driver_unregister(&dw_i2c_driver);
-}
-module_exit(dw_i2c_exit_driver);
+module_platform_driver(dw_i2c_driver);
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v4 2/2] i2c: designware: add two optional property tx/rx-fifo-size
2013-07-26 13:22 ` Zhangfei Gao
@ 2013-07-26 13:22 ` Zhangfei Gao
-1 siblings, 0 replies; 12+ messages in thread
From: Zhangfei Gao @ 2013-07-26 13:22 UTC (permalink / raw)
To: Wolfram Sang, Baruch Siach
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, Zhangfei Gao
Some platform can not get fifo-size info form register DW_IC_COMP_PARAM_1.
Give chance to update rx-fifo-size and tx-fifo-size if provided in dts.
Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Baruch Siach <baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
---
.../devicetree/bindings/i2c/i2c-designware.txt | 7 +++++++
drivers/i2c/busses/i2c-designware-platdrv.c | 3 +++
2 files changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index 7fd7fa2..af0bf8f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -6,6 +6,11 @@ Required properties :
- reg : Offset and length of the register set for the device
- interrupts : <IRQ> where IRQ is the interrupt number.
+Optional properties:
+
+ - rx-fifo-size : 1 cell, Rx fifo size
+ - tx-fifo-size : 1 cell, Tx fifo size
+
Recommended properties :
- clock-frequency : desired I2C bus clock frequency in Hz.
@@ -22,6 +27,8 @@ Example :
compatible = "snps,designware-i2c";
reg = <0xf0000 0x1000>;
interrupts = <11>;
+ rx-fifo-size = <16>;
+ tx-fifo-size = <16>;
clock-frequency = <400000>;
};
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 36ceebc..f657e65 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -86,6 +86,7 @@ static int dw_i2c_probe(struct platform_device *pdev)
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
struct resource *mem;
+ struct device_node *np = pdev->dev.of_node;
int irq, r;
irq = platform_get_irq(pdev, 0);
@@ -145,6 +146,8 @@ static int dw_i2c_probe(struct platform_device *pdev)
dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
dev->adapter.nr = pdev->id;
}
+ of_property_read_u32(np, "rx-fifo-size", &dev->rx_fifo_depth);
+ of_property_read_u32(np, "tx-fifo-size", &dev->tx_fifo_depth);
r = i2c_dw_init(dev);
if (r)
return r;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v4 2/2] i2c: designware: add two optional property tx/rx-fifo-size
@ 2013-07-26 13:22 ` Zhangfei Gao
0 siblings, 0 replies; 12+ messages in thread
From: Zhangfei Gao @ 2013-07-26 13:22 UTC (permalink / raw)
To: linux-arm-kernel
Some platform can not get fifo-size info form register DW_IC_COMP_PARAM_1.
Give chance to update rx-fifo-size and tx-fifo-size if provided in dts.
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
---
.../devicetree/bindings/i2c/i2c-designware.txt | 7 +++++++
drivers/i2c/busses/i2c-designware-platdrv.c | 3 +++
2 files changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index 7fd7fa2..af0bf8f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -6,6 +6,11 @@ Required properties :
- reg : Offset and length of the register set for the device
- interrupts : <IRQ> where IRQ is the interrupt number.
+Optional properties:
+
+ - rx-fifo-size : 1 cell, Rx fifo size
+ - tx-fifo-size : 1 cell, Tx fifo size
+
Recommended properties :
- clock-frequency : desired I2C bus clock frequency in Hz.
@@ -22,6 +27,8 @@ Example :
compatible = "snps,designware-i2c";
reg = <0xf0000 0x1000>;
interrupts = <11>;
+ rx-fifo-size = <16>;
+ tx-fifo-size = <16>;
clock-frequency = <400000>;
};
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 36ceebc..f657e65 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -86,6 +86,7 @@ static int dw_i2c_probe(struct platform_device *pdev)
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
struct resource *mem;
+ struct device_node *np = pdev->dev.of_node;
int irq, r;
irq = platform_get_irq(pdev, 0);
@@ -145,6 +146,8 @@ static int dw_i2c_probe(struct platform_device *pdev)
dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
dev->adapter.nr = pdev->id;
}
+ of_property_read_u32(np, "rx-fifo-size", &dev->rx_fifo_depth);
+ of_property_read_u32(np, "tx-fifo-size", &dev->tx_fifo_depth);
r = i2c_dw_init(dev);
if (r)
return r;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v4 0/2] support hisilicon i2c
2013-07-26 13:22 ` Zhangfei Gao
@ 2013-08-05 2:13 ` zhangfei gao
-1 siblings, 0 replies; 12+ messages in thread
From: zhangfei gao @ 2013-08-05 2:13 UTC (permalink / raw)
To: Zhangfei Gao; +Cc: Wolfram Sang, Baruch Siach, Linux I2C, linux-arm-kernel
On Fri, Jul 26, 2013 at 9:22 PM, Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> V4:
> rebase on 3.11
>
> v3:
> patch 02, use size instead of threshold
>
> v2:
> Suggested by Baruch
> Support hisilicon i2c in i2c-designware-platdrv.c, and adding two optional properties
>
> Zhangfei Gao (2):
> i2c: designware: use module_platform_driver
> i2c: designware: add two optional property tx/rx-fifo-size
>
> .../devicetree/bindings/i2c/i2c-designware.txt | 7 +++++++
> drivers/i2c/busses/i2c-designware-platdrv.c | 17 +++++------------
> 2 files changed, 12 insertions(+), 12 deletions(-)
>
"Basically OK, but please resend for 3.12, so we get enough testing
before entering mainline. I am a bit anxious of side
effects and 3.11 is too near."
Dear Wolfram
The patches are rebased on 3.11 rc2 as your suggestion,
Do you have any other suggestion?
Thanks
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 0/2] support hisilicon i2c
@ 2013-08-05 2:13 ` zhangfei gao
0 siblings, 0 replies; 12+ messages in thread
From: zhangfei gao @ 2013-08-05 2:13 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jul 26, 2013 at 9:22 PM, Zhangfei Gao <zhangfei.gao@linaro.org> wrote:
> V4:
> rebase on 3.11
>
> v3:
> patch 02, use size instead of threshold
>
> v2:
> Suggested by Baruch
> Support hisilicon i2c in i2c-designware-platdrv.c, and adding two optional properties
>
> Zhangfei Gao (2):
> i2c: designware: use module_platform_driver
> i2c: designware: add two optional property tx/rx-fifo-size
>
> .../devicetree/bindings/i2c/i2c-designware.txt | 7 +++++++
> drivers/i2c/busses/i2c-designware-platdrv.c | 17 +++++------------
> 2 files changed, 12 insertions(+), 12 deletions(-)
>
"Basically OK, but please resend for 3.12, so we get enough testing
before entering mainline. I am a bit anxious of side
effects and 3.11 is too near."
Dear Wolfram
The patches are rebased on 3.11 rc2 as your suggestion,
Do you have any other suggestion?
Thanks
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4 2/2] i2c: designware: add two optional property tx/rx-fifo-size
2013-07-26 13:22 ` Zhangfei Gao
@ 2013-08-10 12:50 ` Mark Rutland
-1 siblings, 0 replies; 12+ messages in thread
From: Mark Rutland @ 2013-08-10 12:50 UTC (permalink / raw)
To: Zhangfei Gao; +Cc: Baruch Siach, linux-i2c, linux-arm-kernel, Wolfram Sang
On Fri, Jul 26, 2013 at 02:22:18PM +0100, Zhangfei Gao wrote:
> Some platform can not get fifo-size info form register DW_IC_COMP_PARAM_1.
s/form/from/
Why can they not get info from the register? Is it not implemented, or
buggy? It would be nice to mention why.
> Give chance to update rx-fifo-size and tx-fifo-size if provided in dts.
>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> Acked-by: Baruch Siach <baruch@tkos.co.il>
> ---
> .../devicetree/bindings/i2c/i2c-designware.txt | 7 +++++++
> drivers/i2c/busses/i2c-designware-platdrv.c | 3 +++
> 2 files changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> index 7fd7fa2..af0bf8f 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> @@ -6,6 +6,11 @@ Required properties :
> - reg : Offset and length of the register set for the device
> - interrupts : <IRQ> where IRQ is the interrupt number.
>
> +Optional properties:
> +
> + - rx-fifo-size : 1 cell, Rx fifo size
> + - tx-fifo-size : 1 cell, Tx fifo size
Units? I assume these are in bytes?
It would be nice to mention in the bidning when you need these
properties (i.e. only hwen you can't figure it out from
DW_IC_COMP_PARAM_1 becase ________.
Thanks,
Mark.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 2/2] i2c: designware: add two optional property tx/rx-fifo-size
@ 2013-08-10 12:50 ` Mark Rutland
0 siblings, 0 replies; 12+ messages in thread
From: Mark Rutland @ 2013-08-10 12:50 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jul 26, 2013 at 02:22:18PM +0100, Zhangfei Gao wrote:
> Some platform can not get fifo-size info form register DW_IC_COMP_PARAM_1.
s/form/from/
Why can they not get info from the register? Is it not implemented, or
buggy? It would be nice to mention why.
> Give chance to update rx-fifo-size and tx-fifo-size if provided in dts.
>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> Acked-by: Baruch Siach <baruch@tkos.co.il>
> ---
> .../devicetree/bindings/i2c/i2c-designware.txt | 7 +++++++
> drivers/i2c/busses/i2c-designware-platdrv.c | 3 +++
> 2 files changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> index 7fd7fa2..af0bf8f 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> @@ -6,6 +6,11 @@ Required properties :
> - reg : Offset and length of the register set for the device
> - interrupts : <IRQ> where IRQ is the interrupt number.
>
> +Optional properties:
> +
> + - rx-fifo-size : 1 cell, Rx fifo size
> + - tx-fifo-size : 1 cell, Tx fifo size
Units? I assume these are in bytes?
It would be nice to mention in the bidning when you need these
properties (i.e. only hwen you can't figure it out from
DW_IC_COMP_PARAM_1 becase ________.
Thanks,
Mark.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4 2/2] i2c: designware: add two optional property tx/rx-fifo-size
2013-08-10 12:50 ` Mark Rutland
@ 2013-08-11 7:29 ` zhangfei gao
-1 siblings, 0 replies; 12+ messages in thread
From: zhangfei gao @ 2013-08-11 7:29 UTC (permalink / raw)
To: Mark Rutland
Cc: Zhangfei Gao, Baruch Siach, linux-i2c-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Wolfram Sang
On Sat, Aug 10, 2013 at 8:50 PM, Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> wrote:
> On Fri, Jul 26, 2013 at 02:22:18PM +0100, Zhangfei Gao wrote:
>> Some platform can not get fifo-size info form register DW_IC_COMP_PARAM_1.
>
> s/form/from/
>
> Why can they not get info from the register? Is it not implemented, or
> buggy? It would be nice to mention why.
Dear Mark
Thanks for asking me such question.
When trying to answer this question, I find this patch is not needed now.
It should be caused by my mistake.
Really appreciated.
>
>> Give chance to update rx-fifo-size and tx-fifo-size if provided in dts.
>>
>> Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> Acked-by: Baruch Siach <baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
>> ---
>> .../devicetree/bindings/i2c/i2c-designware.txt | 7 +++++++
>> drivers/i2c/busses/i2c-designware-platdrv.c | 3 +++
>> 2 files changed, 10 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
>> index 7fd7fa2..af0bf8f 100644
>> --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
>> +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
>> @@ -6,6 +6,11 @@ Required properties :
>> - reg : Offset and length of the register set for the device
>> - interrupts : <IRQ> where IRQ is the interrupt number.
>>
>> +Optional properties:
>> +
>> + - rx-fifo-size : 1 cell, Rx fifo size
>> + - tx-fifo-size : 1 cell, Tx fifo size
>
> Units? I assume these are in bytes?
>
> It would be nice to mention in the bidning when you need these
> properties (i.e. only hwen you can't figure it out from
> DW_IC_COMP_PARAM_1 becase ________.
>
> Thanks,
> Mark.
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 2/2] i2c: designware: add two optional property tx/rx-fifo-size
@ 2013-08-11 7:29 ` zhangfei gao
0 siblings, 0 replies; 12+ messages in thread
From: zhangfei gao @ 2013-08-11 7:29 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Aug 10, 2013 at 8:50 PM, Mark Rutland <mark.rutland@arm.com> wrote:
> On Fri, Jul 26, 2013 at 02:22:18PM +0100, Zhangfei Gao wrote:
>> Some platform can not get fifo-size info form register DW_IC_COMP_PARAM_1.
>
> s/form/from/
>
> Why can they not get info from the register? Is it not implemented, or
> buggy? It would be nice to mention why.
Dear Mark
Thanks for asking me such question.
When trying to answer this question, I find this patch is not needed now.
It should be caused by my mistake.
Really appreciated.
>
>> Give chance to update rx-fifo-size and tx-fifo-size if provided in dts.
>>
>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
>> Acked-by: Baruch Siach <baruch@tkos.co.il>
>> ---
>> .../devicetree/bindings/i2c/i2c-designware.txt | 7 +++++++
>> drivers/i2c/busses/i2c-designware-platdrv.c | 3 +++
>> 2 files changed, 10 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
>> index 7fd7fa2..af0bf8f 100644
>> --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
>> +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
>> @@ -6,6 +6,11 @@ Required properties :
>> - reg : Offset and length of the register set for the device
>> - interrupts : <IRQ> where IRQ is the interrupt number.
>>
>> +Optional properties:
>> +
>> + - rx-fifo-size : 1 cell, Rx fifo size
>> + - tx-fifo-size : 1 cell, Tx fifo size
>
> Units? I assume these are in bytes?
>
> It would be nice to mention in the bidning when you need these
> properties (i.e. only hwen you can't figure it out from
> DW_IC_COMP_PARAM_1 becase ________.
>
> Thanks,
> Mark.
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2013-08-11 7:29 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-26 13:22 [PATCH v4 0/2] support hisilicon i2c Zhangfei Gao
2013-07-26 13:22 ` Zhangfei Gao
[not found] ` <1374844938-25505-1-git-send-email-zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2013-07-26 13:22 ` [PATCH v4 1/2] i2c: designware: use module_platform_driver Zhangfei Gao
2013-07-26 13:22 ` Zhangfei Gao
2013-07-26 13:22 ` [PATCH v4 2/2] i2c: designware: add two optional property tx/rx-fifo-size Zhangfei Gao
2013-07-26 13:22 ` Zhangfei Gao
2013-08-10 12:50 ` Mark Rutland
2013-08-10 12:50 ` Mark Rutland
[not found] ` <20130810125015.GB18085-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2013-08-11 7:29 ` zhangfei gao
2013-08-11 7:29 ` zhangfei gao
2013-08-05 2:13 ` [PATCH v4 0/2] support hisilicon i2c zhangfei gao
2013-08-05 2:13 ` zhangfei gao
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.