[PATCH v3 0/3] ARM: TC2 big.LITTLE CPU idle driver

[PATCH v3 0/3] ARM: TC2 big.LITTLE CPU idle driver

[Lorenzo Pieralisi]

This patch is v3 of a previous posting:

http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/189284.html

v3 changes:

- dropped RFC tag
- updated exit_latency and target_residency values as per spec
- added C-state tables comments
- improved readability as per-reviews

v2 changes:

- removed duplicated idle statistics and irq enabling
- use MPIDR masks to compute cluster and cpu ids

This patch series provides the implementation of CPU idle driver for the TC2
ARM big.LITTLE SoC. It is based and dependent on Nico's branch

git://git.linaro.org/people/nico/linux mcpm+tc2

and relative pull request

http://lists.infradead.org/pipermail/linux-arm-kernel/2013-July/185411.html

First two patches in the series simply implement a method to disable the
GIC CPU IF and add the respective call in the MCPM TC2 back-end. Details
are explained in the commit logs.

Patch 3 implements the TC2 CPU idle driver, that paves the way for a
generic ARM idle driver, MCPM based (but PSCI can be easily integrated
as well) for all upcoming big.LITTLE systems.

The CPU idle driver is built upon the multiple drivers CPU idle infrastructure
to define different target residencies for different clusters.

Current driver matches the DT compatible string defining a TC2 testchip core
tile, but in the future will be augmented with a proper match table to
match against all machines that can rely on this driver to implement CPU
idle capabilities.

This CPU idle driver integrates all existing PM kernel concepts recently
implemented for ARM, MCPM, CPU PM notifiers and cpu_suspend and lays the
foundation for a reference implementation of a generic CPU idle driver, since
the driver as it stands is completely generic, C-states definition
notwithstanding.

C-state definition for the driver should be made dynamic so that the driver
can become completely generic and decoupled from static C-states definition.

The driver has been tested, obviously on the TC2 testchip, with different
Linux systems ranging from simple busybox to Android and Ubuntu rootfs,
through millions of C-state iterations randomly triggered by the
aforementioned root filesystem environments.

Comments and review very welcome.

With thanks,
Lorenzo

Lorenzo Pieralisi (2):
  ARM: vexpress: tc2: disable GIC CPU IF in tc2_pm_suspend
  cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

Nicolas Pitre (1):
  drivers: irq-chip: irq-gic: introduce gic_cpu_if_down()

 MAINTAINERS                          |   9 ++
 arch/arm/mach-vexpress/tc2_pm.c      |   2 +
 drivers/cpuidle/Kconfig              |  10 ++
 drivers/cpuidle/Makefile             |   1 +
 drivers/cpuidle/cpuidle-big_little.c | 210 +++++++++++++++++++++++++++++++++++
 drivers/irqchip/irq-gic.c            |   6 +
 include/linux/irqchip/arm-gic.h      |   1 +
 7 files changed, 239 insertions(+)
 create mode 100644 drivers/cpuidle/cpuidle-big_little.c

-- 
1.8.2.2

[PATCH v3 0/3] ARM: TC2 big.LITTLE CPU idle driver

[Lorenzo Pieralisi]

This patch is v3 of a previous posting:

http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/189284.html

v3 changes:

- dropped RFC tag
- updated exit_latency and target_residency values as per spec
- added C-state tables comments
- improved readability as per-reviews

v2 changes:

- removed duplicated idle statistics and irq enabling
- use MPIDR masks to compute cluster and cpu ids

This patch series provides the implementation of CPU idle driver for the TC2
ARM big.LITTLE SoC. It is based and dependent on Nico's branch

git://git.linaro.org/people/nico/linux mcpm+tc2

and relative pull request

http://lists.infradead.org/pipermail/linux-arm-kernel/2013-July/185411.html

First two patches in the series simply implement a method to disable the
GIC CPU IF and add the respective call in the MCPM TC2 back-end. Details
are explained in the commit logs.

Patch 3 implements the TC2 CPU idle driver, that paves the way for a
generic ARM idle driver, MCPM based (but PSCI can be easily integrated
as well) for all upcoming big.LITTLE systems.

The CPU idle driver is built upon the multiple drivers CPU idle infrastructure
to define different target residencies for different clusters.

Current driver matches the DT compatible string defining a TC2 testchip core
tile, but in the future will be augmented with a proper match table to
match against all machines that can rely on this driver to implement CPU
idle capabilities.

This CPU idle driver integrates all existing PM kernel concepts recently
implemented for ARM, MCPM, CPU PM notifiers and cpu_suspend and lays the
foundation for a reference implementation of a generic CPU idle driver, since
the driver as it stands is completely generic, C-states definition
notwithstanding.

C-state definition for the driver should be made dynamic so that the driver
can become completely generic and decoupled from static C-states definition.

The driver has been tested, obviously on the TC2 testchip, with different
Linux systems ranging from simple busybox to Android and Ubuntu rootfs,
through millions of C-state iterations randomly triggered by the
aforementioned root filesystem environments.

Comments and review very welcome.

With thanks,
Lorenzo

Lorenzo Pieralisi (2):
  ARM: vexpress: tc2: disable GIC CPU IF in tc2_pm_suspend
  cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

Nicolas Pitre (1):
  drivers: irq-chip: irq-gic: introduce gic_cpu_if_down()

 MAINTAINERS                          |   9 ++
 arch/arm/mach-vexpress/tc2_pm.c      |   2 +
 drivers/cpuidle/Kconfig              |  10 ++
 drivers/cpuidle/Makefile             |   1 +
 drivers/cpuidle/cpuidle-big_little.c | 210 +++++++++++++++++++++++++++++++++++
 drivers/irqchip/irq-gic.c            |   6 +
 include/linux/irqchip/arm-gic.h      |   1 +
 7 files changed, 239 insertions(+)
 create mode 100644 drivers/cpuidle/cpuidle-big_little.c

-- 
1.8.2.2

[PATCH v3 1/3] drivers: irq-chip: irq-gic: introduce gic_cpu_if_down()

[Lorenzo Pieralisi]

From: Nicolas Pitre <nicolas.pitre@linaro.org>

When processors are about to hit low power states, the assertion of
standbywfi signal, triggered by the wfi instruction, is essential to
entering low power modes. If an IRQ is pending on the processor at the
time wfi is issued, the wfi instruction completes and the processor
restarts execution without asserting the standbywfi signal. Depending
on the platform power controller HW this behaviour can be acceptable or
not; if this behaviour must be prevented software should be provided
with a way to disable the routing of interrupts to the core IRQ pins.

On systems where raw GIC distributor interrupts are connected to the power
controller as wake-up events (hence the power controller still senses
IRQs and can wake up cores upon IRQ pending), the GIC CPU interface can
be disabled on power down, so that the GIC CPU IF output is gated and wfi
cannot complete, thereby preventing the standbywfi issue.

This patch adds a simple function to the GIC driver that allows to
disable the GIC CPU IF from power down procedures.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[rewrote commit log]
---
 drivers/irqchip/irq-gic.c       | 6 ++++++
 include/linux/irqchip/arm-gic.h | 1 +
 2 files changed, 7 insertions(+)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index ee7c503..d0e9480 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -453,6 +453,12 @@ static void gic_cpu_init(struct gic_chip_data *gic)
 	writel_relaxed(1, base + GIC_CPU_CTRL);
 }
 
+void gic_cpu_if_down(void)
+{
+	void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
+	writel_relaxed(0, cpu_base + GIC_CPU_CTRL);
+}
+
 #ifdef CONFIG_CPU_PM
 /*
  * Saves the GIC distributor registers during suspend or idle.  Must be called
diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
index 3e203eb..0e5d9ec 100644
--- a/include/linux/irqchip/arm-gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -66,6 +66,7 @@ extern struct irq_chip gic_arch_extn;
 void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
 		    u32 offset, struct device_node *);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
+void gic_cpu_if_down(void);
 
 static inline void gic_init(unsigned int nr, int start,
 			    void __iomem *dist , void __iomem *cpu)
-- 
1.8.2.2

[PATCH v3 1/3] drivers: irq-chip: irq-gic: introduce gic_cpu_if_down()

[Lorenzo Pieralisi]

From: Nicolas Pitre <nicolas.pitre@linaro.org>

When processors are about to hit low power states, the assertion of
standbywfi signal, triggered by the wfi instruction, is essential to
entering low power modes. If an IRQ is pending on the processor at the
time wfi is issued, the wfi instruction completes and the processor
restarts execution without asserting the standbywfi signal. Depending
on the platform power controller HW this behaviour can be acceptable or
not; if this behaviour must be prevented software should be provided
with a way to disable the routing of interrupts to the core IRQ pins.

On systems where raw GIC distributor interrupts are connected to the power
controller as wake-up events (hence the power controller still senses
IRQs and can wake up cores upon IRQ pending), the GIC CPU interface can
be disabled on power down, so that the GIC CPU IF output is gated and wfi
cannot complete, thereby preventing the standbywfi issue.

This patch adds a simple function to the GIC driver that allows to
disable the GIC CPU IF from power down procedures.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[rewrote commit log]
---
 drivers/irqchip/irq-gic.c       | 6 ++++++
 include/linux/irqchip/arm-gic.h | 1 +
 2 files changed, 7 insertions(+)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index ee7c503..d0e9480 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -453,6 +453,12 @@ static void gic_cpu_init(struct gic_chip_data *gic)
 	writel_relaxed(1, base + GIC_CPU_CTRL);
 }
 
+void gic_cpu_if_down(void)
+{
+	void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
+	writel_relaxed(0, cpu_base + GIC_CPU_CTRL);
+}
+
 #ifdef CONFIG_CPU_PM
 /*
  * Saves the GIC distributor registers during suspend or idle.  Must be called
diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
index 3e203eb..0e5d9ec 100644
--- a/include/linux/irqchip/arm-gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -66,6 +66,7 @@ extern struct irq_chip gic_arch_extn;
 void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
 		    u32 offset, struct device_node *);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
+void gic_cpu_if_down(void);
 
 static inline void gic_init(unsigned int nr, int start,
 			    void __iomem *dist , void __iomem *cpu)
-- 
1.8.2.2

[PATCH v3 2/3] ARM: vexpress: tc2: disable GIC CPU IF in tc2_pm_suspend

[Lorenzo Pieralisi]

To prevent cores from exiting wfi when they are about to be shut down
the GIC CPU IF must be disabled so that the GIC CPU IF IRQ output line
is not asserted to the cores. wfi completion must be prevented since,
in absence of coordinating HW logic, if the power controller receives
a standbywfi signal but in the meantime the processor restarts executing
owing to a pending IRQ, the core might be reset when running in a
non-quiescent state (eg with pending load/store transactions)

Raw GIC distributor IRQ signals are routed to the power controller, that
is capable of taking core out of reset on pending IRQs even if their GIC
CPU IF is disabled, thus keeping the normal wfi behaviour.

GIC CPU IF is restored upon CPU wake-up by the respective MCPM API
consumers (ie CPU idle driver and suspend to RAM thread).

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
 arch/arm/mach-vexpress/tc2_pm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index dfb55d4..3303ac6 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/errno.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/mcpm.h>
 #include <asm/proc-fns.h>
@@ -211,6 +212,7 @@ static void tc2_pm_suspend(u64 residency)
 	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
+	gic_cpu_if_down();
 	tc2_pm_down(residency);
 }
 
-- 
1.8.2.2

[PATCH v3 2/3] ARM: vexpress: tc2: disable GIC CPU IF in tc2_pm_suspend

[Lorenzo Pieralisi]

To prevent cores from exiting wfi when they are about to be shut down
the GIC CPU IF must be disabled so that the GIC CPU IF IRQ output line
is not asserted to the cores. wfi completion must be prevented since,
in absence of coordinating HW logic, if the power controller receives
a standbywfi signal but in the meantime the processor restarts executing
owing to a pending IRQ, the core might be reset when running in a
non-quiescent state (eg with pending load/store transactions)

Raw GIC distributor IRQ signals are routed to the power controller, that
is capable of taking core out of reset on pending IRQs even if their GIC
CPU IF is disabled, thus keeping the normal wfi behaviour.

GIC CPU IF is restored upon CPU wake-up by the respective MCPM API
consumers (ie CPU idle driver and suspend to RAM thread).

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
 arch/arm/mach-vexpress/tc2_pm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index dfb55d4..3303ac6 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/errno.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/mcpm.h>
 #include <asm/proc-fns.h>
@@ -211,6 +212,7 @@ static void tc2_pm_suspend(u64 residency)
 	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
+	gic_cpu_if_down();
 	tc2_pm_down(residency);
 }
 
-- 
1.8.2.2

[PATCH v3 3/3] cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

[Lorenzo Pieralisi]

The big.LITTLE architecture is composed of two clusters of cpus. One cluster
contains less powerful but more energy efficient processors and the other
cluster groups the powerful but energy-intensive cpus.

The TC2 testchip implements two clusters of CPUs (A7 and A15 clusters in
a big.LITTLE configuration) connected through a CCI interconnect that manages
coherency of their respective L2 caches and intercluster distributed
virtual memory messages (DVM).

TC2 testchip integrates a power controller that manages cores resets, wake-up
IRQs and cluster low-power states. Power states are managed at cluster
level, which means that voltage is removed from a cluster iff all cores
in a cluster are in a wfi state. Single cores can enter a reset state
which is identical to wfi in terms of power consumption but simplifies the
way cluster states are entered.

This patch provides a multiple driver CPU idle implementation for TC2
which paves the way for a generic big.LITTLE idle driver for all
upcoming big.LITTLE based systems on chip.

The driver relies on the MCPM infrastructure to coordinate and manage
core power states; in particular MCPM allows to suspend specific cores
and hides the CPUs coordination required to shut-down clusters of CPUs.

Power down sequences for the respective clusters are implemented in the
MCPM TC2 backend, with all code needed to clean caches and exit coherency.

The multiple driver CPU idle infrastructure allows to define different
C-states for big and little cores, determined at boot by checking the
part id of the possible CPUs and initializing the respective logical
masks in the big and little drivers.

Current big.little systems are composed of A7 and A15 clusters, as
implemented in TC2, but in the future that may change and the driver
will have evolve to retrieve what is a 'big' cpu and what is a 'little'
cpu in order to build the correct topology.

Cc: Kevin Hilman <khilman@linaro.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
 MAINTAINERS                          |   9 ++
 drivers/cpuidle/Kconfig              |  10 ++
 drivers/cpuidle/Makefile             |   1 +
 drivers/cpuidle/cpuidle-big_little.c | 210 +++++++++++++++++++++++++++++++++++
 4 files changed, 230 insertions(+)
 create mode 100644 drivers/cpuidle/cpuidle-big_little.c

diff --git a/MAINTAINERS b/MAINTAINERS
index bf61e04..01f1b3d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2263,6 +2263,15 @@ F:	drivers/cpufreq/arm_big_little.h
 F:	drivers/cpufreq/arm_big_little.c
 F:	drivers/cpufreq/arm_big_little_dt.c
 
+CPUIDLE DRIVER - ARM BIG LITTLE
+M:      Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+M:      Daniel Lezcano <daniel.lezcano@linaro.org>
+L:      linux-pm@vger.kernel.org
+L:      linux-arm-kernel@lists.infradead.org
+T:      git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+S:      Maintained
+F:      drivers/cpuidle/cpuidle-big_little.c
+
 CPUIDLE DRIVERS
 M:	Rafael J. Wysocki <rjw@sisk.pl>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index 0e2cd5c..0f86587 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -42,6 +42,16 @@ config CPU_IDLE_ZYNQ
 	help
 	  Select this to enable cpuidle on Xilinx Zynq processors.
 
+config CPU_IDLE_BIG_LITTLE
+	bool "Support for ARM big.LITTLE processors"
+	depends on ARCH_VEXPRESS_TC2_PM
+	select ARM_CPU_SUSPEND
+	select CPU_IDLE_MULTIPLE_DRIVERS
+	help
+	  Select this option to enable CPU idle driver for big.LITTLE based
+	  ARM systems. Driver manages CPUs coordination through MCPM and
+	  define different C-states for little and big cores through the
+	  multiple CPU idle drivers infrastructure.
 endif
 
 config ARCH_NEEDS_CPU_IDLE_COUPLED
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 8767a7b..3b6445c 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
 obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o
 obj-$(CONFIG_ARCH_KIRKWOOD) += cpuidle-kirkwood.o
 obj-$(CONFIG_CPU_IDLE_ZYNQ) += cpuidle-zynq.o
+obj-$(CONFIG_CPU_IDLE_BIG_LITTLE) += cpuidle-big_little.o
diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c
new file mode 100644
index 0000000..7babf73
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-big_little.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright (c) 2013 ARM/Linaro
+ *
+ * Authors: Daniel Lezcano <daniel.lezcano@linaro.org>
+ *          Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ *          Nicolas Pitre <nicolas.pitre@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Maintainer: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ * Maintainer: Daniel Lezcano <daniel.lezcano@linaro.org>
+ */
+#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <asm/cpu.h>
+#include <asm/cputype.h>
+#include <asm/cpuidle.h>
+#include <asm/mcpm.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+
+static int bl_enter_powerdown(struct cpuidle_device *dev,
+			      struct cpuidle_driver *drv, int idx);
+
+/*
+ * NB: Owing to current menu governor behaviour big and LITTLE
+ * index 1 states have to define exit_latency and target_residency for
+ * cluster state since, when all CPUs in a cluster hit it, the cluster
+ * can be shutdown. This means that when a single CPU enters this state
+ * the exit_latency and target_residency values are somewhat overkill.
+ * There is no notion of cluster states in the menu governor, so CPUs
+ * have to define CPU states where possibly the cluster will be shutdown
+ * depending on the state of other CPUs. idle states entry and exit happen
+ * at random times; however the cluster state provides target_residency
+ * values as if all CPUs in a cluster enter the state at once; this is
+ * somewhat optimistic and behaviour should be fixed either in the governor
+ * or in the MCPM back-ends.
+ * To make this driver 100% generic the number of states and the exit_latency
+ * target_residency values must be obtained from device tree bindings.
+ *
+ * exit_latency: refers to the TC2 vexpress test chip and depends on the
+ * current cluster operating point. It is the time it takes to get the CPU
+ * up and running when the CPU is powered up on cluster wake-up from shutdown.
+ * Current values for big and LITTLE clusters are provided for clusters
+ * running at default operating points.
+ *
+ * target_residency: it is the minimum amount of time the cluster has
+ * to be down to break even in terms of power consumption. cluster
+ * shutdown has inherent dynamic power costs (L2 writebacks to DRAM
+ * being the main factor) that depend on the current operating points.
+ * The current values for both clusters are provided for a CPU whose half
+ * of L2 lines are dirty and require cleaning to DRAM, and takes into
+ * account leakage static power values related to the vexpress TC2 testchip.
+ */
+static struct cpuidle_driver bl_idle_little_driver = {
+	.name = "little_idle",
+	.owner = THIS_MODULE,
+	.states[0] = ARM_CPUIDLE_WFI_STATE,
+	.states[1] = {
+		.enter			= bl_enter_powerdown,
+		.exit_latency		= 700,
+		.target_residency	= 2500,
+		.flags			= CPUIDLE_FLAG_TIME_VALID |
+					  CPUIDLE_FLAG_TIMER_STOP,
+		.name			= "C1",
+		.desc			= "ARM little-cluster power down",
+	},
+	.state_count = 2,
+};
+
+static struct cpuidle_driver bl_idle_big_driver = {
+	.name = "big_idle",
+	.owner = THIS_MODULE,
+	.states[0] = ARM_CPUIDLE_WFI_STATE,
+	.states[1] = {
+		.enter			= bl_enter_powerdown,
+
+		.exit_latency		= 500,
+		.target_residency	= 2000,
+		.flags			= CPUIDLE_FLAG_TIME_VALID |
+					  CPUIDLE_FLAG_TIMER_STOP,
+		.name			= "C1",
+		.desc			= "ARM big-cluster power down",
+	},
+	.state_count = 2,
+};
+
+/*
+ * notrace prevents trace shims from getting inserted where they
+ * should not. Global jumps and ldrex/strex must not be inserted
+ * in power down sequences where caches and MMU may be turned off.
+ */
+static int notrace bl_powerdown_finisher(unsigned long arg)
+{
+	/* MCPM works with HW CPU identifiers */
+	unsigned int mpidr = read_cpuid_mpidr();
+	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
+	mcpm_set_entry_vector(cpu, cluster, cpu_resume);
+
+	/*
+	 * Residency value passed to mcpm_cpu_suspend back-end
+	 * has to be given clear semantics. Set to 0 as a
+	 * temporary value.
+	 */
+	mcpm_cpu_suspend(0);
+
+	/* return value != 0 means failure */
+	return 1;
+}
+
+/**
+ * bl_enter_powerdown - Programs CPU to enter the specified state
+ * @dev: cpuidle device
+ * @drv: The target state to be programmed
+ * @idx: state index
+ *
+ * Called from the CPUidle framework to program the device to the
+ * specified target state selected by the governor.
+ */
+static int bl_enter_powerdown(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv, int idx)
+{
+	cpu_pm_enter();
+
+	cpu_suspend(0, bl_powerdown_finisher);
+
+	/* signals the MCPM core that CPU is out of low power state */
+	mcpm_cpu_powered_up();
+
+	cpu_pm_exit();
+
+	return idx;
+}
+
+static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int cpu_id)
+{
+	struct cpuinfo_arm *cpu_info;
+	struct cpumask *cpumask;
+	unsigned long cpuid;
+	int cpu;
+
+	cpumask = kzalloc(cpumask_size(), GFP_KERNEL);
+	if (!cpumask)
+		return -ENOMEM;
+
+	for_each_possible_cpu(cpu) {
+		cpu_info = &per_cpu(cpu_data, cpu);
+		cpuid = is_smp() ? cpu_info->cpuid : read_cpuid_id();
+
+		/* read cpu id part number */
+		if ((cpuid & 0xFFF0) == cpu_id)
+			cpumask_set_cpu(cpu, cpumask);
+	}
+
+	drv->cpumask = cpumask;
+
+	return 0;
+}
+
+static int __init bl_idle_init(void)
+{
+	int ret;
+
+	/*
+	 * Initialize the driver just for a compliant set of machines
+	 */
+	if (!of_machine_is_compatible("arm,vexpress,v2p-ca15_a7"))
+		return -ENODEV;
+	/*
+	 * For now the differentiation between little and big cores
+	 * is based on the part number. A7 cores are considered little
+	 * cores, A15 are considered big cores. This distinction may
+	 * evolve in the future with a more generic matching approach.
+	 */
+	ret = bl_idle_driver_init(&bl_idle_little_driver,
+				  ARM_CPU_PART_CORTEX_A7);
+	if (ret)
+		return ret;
+
+	ret = bl_idle_driver_init(&bl_idle_big_driver, ARM_CPU_PART_CORTEX_A15);
+	if (ret)
+		goto out_uninit_little;
+
+	ret = cpuidle_register(&bl_idle_little_driver, NULL);
+	if (ret)
+		goto out_uninit_big;
+
+	ret = cpuidle_register(&bl_idle_big_driver, NULL);
+	if (ret)
+		goto out_unregister_little;
+
+	return 0;
+
+out_unregister_little:
+	cpuidle_unregister(&bl_idle_little_driver);
+out_uninit_big:
+	kfree(bl_idle_big_driver.cpumask);
+out_uninit_little:
+	kfree(bl_idle_little_driver.cpumask);
+
+	return ret;
+}
+device_initcall(bl_idle_init);
-- 
1.8.2.2

[PATCH v3 3/3] cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

[Lorenzo Pieralisi]

The big.LITTLE architecture is composed of two clusters of cpus. One cluster
contains less powerful but more energy efficient processors and the other
cluster groups the powerful but energy-intensive cpus.

The TC2 testchip implements two clusters of CPUs (A7 and A15 clusters in
a big.LITTLE configuration) connected through a CCI interconnect that manages
coherency of their respective L2 caches and intercluster distributed
virtual memory messages (DVM).

TC2 testchip integrates a power controller that manages cores resets, wake-up
IRQs and cluster low-power states. Power states are managed at cluster
level, which means that voltage is removed from a cluster iff all cores
in a cluster are in a wfi state. Single cores can enter a reset state
which is identical to wfi in terms of power consumption but simplifies the
way cluster states are entered.

This patch provides a multiple driver CPU idle implementation for TC2
which paves the way for a generic big.LITTLE idle driver for all
upcoming big.LITTLE based systems on chip.

The driver relies on the MCPM infrastructure to coordinate and manage
core power states; in particular MCPM allows to suspend specific cores
and hides the CPUs coordination required to shut-down clusters of CPUs.

Power down sequences for the respective clusters are implemented in the
MCPM TC2 backend, with all code needed to clean caches and exit coherency.

The multiple driver CPU idle infrastructure allows to define different
C-states for big and little cores, determined at boot by checking the
part id of the possible CPUs and initializing the respective logical
masks in the big and little drivers.

Current big.little systems are composed of A7 and A15 clusters, as
implemented in TC2, but in the future that may change and the driver
will have evolve to retrieve what is a 'big' cpu and what is a 'little'
cpu in order to build the correct topology.

Cc: Kevin Hilman <khilman@linaro.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
 MAINTAINERS                          |   9 ++
 drivers/cpuidle/Kconfig              |  10 ++
 drivers/cpuidle/Makefile             |   1 +
 drivers/cpuidle/cpuidle-big_little.c | 210 +++++++++++++++++++++++++++++++++++
 4 files changed, 230 insertions(+)
 create mode 100644 drivers/cpuidle/cpuidle-big_little.c

diff --git a/MAINTAINERS b/MAINTAINERS
index bf61e04..01f1b3d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2263,6 +2263,15 @@ F:	drivers/cpufreq/arm_big_little.h
 F:	drivers/cpufreq/arm_big_little.c
 F:	drivers/cpufreq/arm_big_little_dt.c
 
+CPUIDLE DRIVER - ARM BIG LITTLE
+M:      Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+M:      Daniel Lezcano <daniel.lezcano@linaro.org>
+L:      linux-pm at vger.kernel.org
+L:      linux-arm-kernel at lists.infradead.org
+T:      git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+S:      Maintained
+F:      drivers/cpuidle/cpuidle-big_little.c
+
 CPUIDLE DRIVERS
 M:	Rafael J. Wysocki <rjw@sisk.pl>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index 0e2cd5c..0f86587 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -42,6 +42,16 @@ config CPU_IDLE_ZYNQ
 	help
 	  Select this to enable cpuidle on Xilinx Zynq processors.
 
+config CPU_IDLE_BIG_LITTLE
+	bool "Support for ARM big.LITTLE processors"
+	depends on ARCH_VEXPRESS_TC2_PM
+	select ARM_CPU_SUSPEND
+	select CPU_IDLE_MULTIPLE_DRIVERS
+	help
+	  Select this option to enable CPU idle driver for big.LITTLE based
+	  ARM systems. Driver manages CPUs coordination through MCPM and
+	  define different C-states for little and big cores through the
+	  multiple CPU idle drivers infrastructure.
 endif
 
 config ARCH_NEEDS_CPU_IDLE_COUPLED
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 8767a7b..3b6445c 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
 obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o
 obj-$(CONFIG_ARCH_KIRKWOOD) += cpuidle-kirkwood.o
 obj-$(CONFIG_CPU_IDLE_ZYNQ) += cpuidle-zynq.o
+obj-$(CONFIG_CPU_IDLE_BIG_LITTLE) += cpuidle-big_little.o
diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c
new file mode 100644
index 0000000..7babf73
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-big_little.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright (c) 2013 ARM/Linaro
+ *
+ * Authors: Daniel Lezcano <daniel.lezcano@linaro.org>
+ *          Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ *          Nicolas Pitre <nicolas.pitre@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Maintainer: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ * Maintainer: Daniel Lezcano <daniel.lezcano@linaro.org>
+ */
+#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <asm/cpu.h>
+#include <asm/cputype.h>
+#include <asm/cpuidle.h>
+#include <asm/mcpm.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+
+static int bl_enter_powerdown(struct cpuidle_device *dev,
+			      struct cpuidle_driver *drv, int idx);
+
+/*
+ * NB: Owing to current menu governor behaviour big and LITTLE
+ * index 1 states have to define exit_latency and target_residency for
+ * cluster state since, when all CPUs in a cluster hit it, the cluster
+ * can be shutdown. This means that when a single CPU enters this state
+ * the exit_latency and target_residency values are somewhat overkill.
+ * There is no notion of cluster states in the menu governor, so CPUs
+ * have to define CPU states where possibly the cluster will be shutdown
+ * depending on the state of other CPUs. idle states entry and exit happen
+ * at random times; however the cluster state provides target_residency
+ * values as if all CPUs in a cluster enter the state at once; this is
+ * somewhat optimistic and behaviour should be fixed either in the governor
+ * or in the MCPM back-ends.
+ * To make this driver 100% generic the number of states and the exit_latency
+ * target_residency values must be obtained from device tree bindings.
+ *
+ * exit_latency: refers to the TC2 vexpress test chip and depends on the
+ * current cluster operating point. It is the time it takes to get the CPU
+ * up and running when the CPU is powered up on cluster wake-up from shutdown.
+ * Current values for big and LITTLE clusters are provided for clusters
+ * running at default operating points.
+ *
+ * target_residency: it is the minimum amount of time the cluster has
+ * to be down to break even in terms of power consumption. cluster
+ * shutdown has inherent dynamic power costs (L2 writebacks to DRAM
+ * being the main factor) that depend on the current operating points.
+ * The current values for both clusters are provided for a CPU whose half
+ * of L2 lines are dirty and require cleaning to DRAM, and takes into
+ * account leakage static power values related to the vexpress TC2 testchip.
+ */
+static struct cpuidle_driver bl_idle_little_driver = {
+	.name = "little_idle",
+	.owner = THIS_MODULE,
+	.states[0] = ARM_CPUIDLE_WFI_STATE,
+	.states[1] = {
+		.enter			= bl_enter_powerdown,
+		.exit_latency		= 700,
+		.target_residency	= 2500,
+		.flags			= CPUIDLE_FLAG_TIME_VALID |
+					  CPUIDLE_FLAG_TIMER_STOP,
+		.name			= "C1",
+		.desc			= "ARM little-cluster power down",
+	},
+	.state_count = 2,
+};
+
+static struct cpuidle_driver bl_idle_big_driver = {
+	.name = "big_idle",
+	.owner = THIS_MODULE,
+	.states[0] = ARM_CPUIDLE_WFI_STATE,
+	.states[1] = {
+		.enter			= bl_enter_powerdown,
+
+		.exit_latency		= 500,
+		.target_residency	= 2000,
+		.flags			= CPUIDLE_FLAG_TIME_VALID |
+					  CPUIDLE_FLAG_TIMER_STOP,
+		.name			= "C1",
+		.desc			= "ARM big-cluster power down",
+	},
+	.state_count = 2,
+};
+
+/*
+ * notrace prevents trace shims from getting inserted where they
+ * should not. Global jumps and ldrex/strex must not be inserted
+ * in power down sequences where caches and MMU may be turned off.
+ */
+static int notrace bl_powerdown_finisher(unsigned long arg)
+{
+	/* MCPM works with HW CPU identifiers */
+	unsigned int mpidr = read_cpuid_mpidr();
+	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
+	mcpm_set_entry_vector(cpu, cluster, cpu_resume);
+
+	/*
+	 * Residency value passed to mcpm_cpu_suspend back-end
+	 * has to be given clear semantics. Set to 0 as a
+	 * temporary value.
+	 */
+	mcpm_cpu_suspend(0);
+
+	/* return value != 0 means failure */
+	return 1;
+}
+
+/**
+ * bl_enter_powerdown - Programs CPU to enter the specified state
+ * @dev: cpuidle device
+ * @drv: The target state to be programmed
+ * @idx: state index
+ *
+ * Called from the CPUidle framework to program the device to the
+ * specified target state selected by the governor.
+ */
+static int bl_enter_powerdown(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv, int idx)
+{
+	cpu_pm_enter();
+
+	cpu_suspend(0, bl_powerdown_finisher);
+
+	/* signals the MCPM core that CPU is out of low power state */
+	mcpm_cpu_powered_up();
+
+	cpu_pm_exit();
+
+	return idx;
+}
+
+static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int cpu_id)
+{
+	struct cpuinfo_arm *cpu_info;
+	struct cpumask *cpumask;
+	unsigned long cpuid;
+	int cpu;
+
+	cpumask = kzalloc(cpumask_size(), GFP_KERNEL);
+	if (!cpumask)
+		return -ENOMEM;
+
+	for_each_possible_cpu(cpu) {
+		cpu_info = &per_cpu(cpu_data, cpu);
+		cpuid = is_smp() ? cpu_info->cpuid : read_cpuid_id();
+
+		/* read cpu id part number */
+		if ((cpuid & 0xFFF0) == cpu_id)
+			cpumask_set_cpu(cpu, cpumask);
+	}
+
+	drv->cpumask = cpumask;
+
+	return 0;
+}
+
+static int __init bl_idle_init(void)
+{
+	int ret;
+
+	/*
+	 * Initialize the driver just for a compliant set of machines
+	 */
+	if (!of_machine_is_compatible("arm,vexpress,v2p-ca15_a7"))
+		return -ENODEV;
+	/*
+	 * For now the differentiation between little and big cores
+	 * is based on the part number. A7 cores are considered little
+	 * cores, A15 are considered big cores. This distinction may
+	 * evolve in the future with a more generic matching approach.
+	 */
+	ret = bl_idle_driver_init(&bl_idle_little_driver,
+				  ARM_CPU_PART_CORTEX_A7);
+	if (ret)
+		return ret;
+
+	ret = bl_idle_driver_init(&bl_idle_big_driver, ARM_CPU_PART_CORTEX_A15);
+	if (ret)
+		goto out_uninit_little;
+
+	ret = cpuidle_register(&bl_idle_little_driver, NULL);
+	if (ret)
+		goto out_uninit_big;
+
+	ret = cpuidle_register(&bl_idle_big_driver, NULL);
+	if (ret)
+		goto out_unregister_little;
+
+	return 0;
+
+out_unregister_little:
+	cpuidle_unregister(&bl_idle_little_driver);
+out_uninit_big:
+	kfree(bl_idle_big_driver.cpumask);
+out_uninit_little:
+	kfree(bl_idle_little_driver.cpumask);
+
+	return ret;
+}
+device_initcall(bl_idle_init);
-- 
1.8.2.2

Re: [PATCH v3 3/3] cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

[Daniel Lezcano]

On 08/07/2013 01:43 PM, Lorenzo Pieralisi wrote:
> The big.LITTLE architecture is composed of two clusters of cpus. One cluster
> contains less powerful but more energy efficient processors and the other
> cluster groups the powerful but energy-intensive cpus.
> 
> The TC2 testchip implements two clusters of CPUs (A7 and A15 clusters in
> a big.LITTLE configuration) connected through a CCI interconnect that manages
> coherency of their respective L2 caches and intercluster distributed
> virtual memory messages (DVM).
> 
> TC2 testchip integrates a power controller that manages cores resets, wake-up
> IRQs and cluster low-power states. Power states are managed at cluster
> level, which means that voltage is removed from a cluster iff all cores
> in a cluster are in a wfi state. Single cores can enter a reset state
> which is identical to wfi in terms of power consumption but simplifies the
> way cluster states are entered.
> 
> This patch provides a multiple driver CPU idle implementation for TC2
> which paves the way for a generic big.LITTLE idle driver for all
> upcoming big.LITTLE based systems on chip.
> 
> The driver relies on the MCPM infrastructure to coordinate and manage
> core power states; in particular MCPM allows to suspend specific cores
> and hides the CPUs coordination required to shut-down clusters of CPUs.
> 
> Power down sequences for the respective clusters are implemented in the
> MCPM TC2 backend, with all code needed to clean caches and exit coherency.
> 
> The multiple driver CPU idle infrastructure allows to define different
> C-states for big and little cores, determined at boot by checking the
> part id of the possible CPUs and initializing the respective logical
> masks in the big and little drivers.
> 
> Current big.little systems are composed of A7 and A15 clusters, as
> implemented in TC2, but in the future that may change and the driver
> will have evolve to retrieve what is a 'big' cpu and what is a 'little'
> cpu in order to build the correct topology.
> 
> Cc: Kevin Hilman <khilman@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@linaro.org>
> Cc: Olof Johansson <olof@lixom.net>
> Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
> Cc: Rafael J. Wysocki <rjw@sisk.pl>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> ---

A nit below :/

[ ... ]

> +
> +static struct cpuidle_driver bl_idle_big_driver = {
> +	.name = "big_idle",
> +	.owner = THIS_MODULE,
> +	.states[0] = ARM_CPUIDLE_WFI_STATE,
> +	.states[1] = {
> +		.enter			= bl_enter_powerdown,
> +
> +		.exit_latency		= 500,

Extra line between enter and exit_latency.

> +		.target_residency	= 2000,
> +		.flags			= CPUIDLE_FLAG_TIME_VALID |
> +					  CPUIDLE_FLAG_TIMER_STOP,
> +		.name			= "C1",
> +		.desc			= "ARM big-cluster power down",
> +	},
> +	.state_count = 2,
> +};

Thanks
  -- Daniel



-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[PATCH v3 3/3] cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

[Daniel Lezcano]

On 08/07/2013 01:43 PM, Lorenzo Pieralisi wrote:
> The big.LITTLE architecture is composed of two clusters of cpus. One cluster
> contains less powerful but more energy efficient processors and the other
> cluster groups the powerful but energy-intensive cpus.
> 
> The TC2 testchip implements two clusters of CPUs (A7 and A15 clusters in
> a big.LITTLE configuration) connected through a CCI interconnect that manages
> coherency of their respective L2 caches and intercluster distributed
> virtual memory messages (DVM).
> 
> TC2 testchip integrates a power controller that manages cores resets, wake-up
> IRQs and cluster low-power states. Power states are managed at cluster
> level, which means that voltage is removed from a cluster iff all cores
> in a cluster are in a wfi state. Single cores can enter a reset state
> which is identical to wfi in terms of power consumption but simplifies the
> way cluster states are entered.
> 
> This patch provides a multiple driver CPU idle implementation for TC2
> which paves the way for a generic big.LITTLE idle driver for all
> upcoming big.LITTLE based systems on chip.
> 
> The driver relies on the MCPM infrastructure to coordinate and manage
> core power states; in particular MCPM allows to suspend specific cores
> and hides the CPUs coordination required to shut-down clusters of CPUs.
> 
> Power down sequences for the respective clusters are implemented in the
> MCPM TC2 backend, with all code needed to clean caches and exit coherency.
> 
> The multiple driver CPU idle infrastructure allows to define different
> C-states for big and little cores, determined at boot by checking the
> part id of the possible CPUs and initializing the respective logical
> masks in the big and little drivers.
> 
> Current big.little systems are composed of A7 and A15 clusters, as
> implemented in TC2, but in the future that may change and the driver
> will have evolve to retrieve what is a 'big' cpu and what is a 'little'
> cpu in order to build the correct topology.
> 
> Cc: Kevin Hilman <khilman@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@linaro.org>
> Cc: Olof Johansson <olof@lixom.net>
> Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
> Cc: Rafael J. Wysocki <rjw@sisk.pl>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> ---

A nit below :/

[ ... ]

> +
> +static struct cpuidle_driver bl_idle_big_driver = {
> +	.name = "big_idle",
> +	.owner = THIS_MODULE,
> +	.states[0] = ARM_CPUIDLE_WFI_STATE,
> +	.states[1] = {
> +		.enter			= bl_enter_powerdown,
> +
> +		.exit_latency		= 500,

Extra line between enter and exit_latency.

> +		.target_residency	= 2000,
> +		.flags			= CPUIDLE_FLAG_TIME_VALID |
> +					  CPUIDLE_FLAG_TIMER_STOP,
> +		.name			= "C1",
> +		.desc			= "ARM big-cluster power down",
> +	},
> +	.state_count = 2,
> +};

Thanks
  -- Daniel



-- 
 <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v3 3/3] cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

[Lorenzo Pieralisi]

On Thu, Aug 08, 2013 at 05:00:24PM +0100, Daniel Lezcano wrote:
> On 08/07/2013 01:43 PM, Lorenzo Pieralisi wrote:
> > The big.LITTLE architecture is composed of two clusters of cpus. One cluster
> > contains less powerful but more energy efficient processors and the other
> > cluster groups the powerful but energy-intensive cpus.
> > 
> > The TC2 testchip implements two clusters of CPUs (A7 and A15 clusters in
> > a big.LITTLE configuration) connected through a CCI interconnect that manages
> > coherency of their respective L2 caches and intercluster distributed
> > virtual memory messages (DVM).
> > 
> > TC2 testchip integrates a power controller that manages cores resets, wake-up
> > IRQs and cluster low-power states. Power states are managed at cluster
> > level, which means that voltage is removed from a cluster iff all cores
> > in a cluster are in a wfi state. Single cores can enter a reset state
> > which is identical to wfi in terms of power consumption but simplifies the
> > way cluster states are entered.
> > 
> > This patch provides a multiple driver CPU idle implementation for TC2
> > which paves the way for a generic big.LITTLE idle driver for all
> > upcoming big.LITTLE based systems on chip.
> > 
> > The driver relies on the MCPM infrastructure to coordinate and manage
> > core power states; in particular MCPM allows to suspend specific cores
> > and hides the CPUs coordination required to shut-down clusters of CPUs.
> > 
> > Power down sequences for the respective clusters are implemented in the
> > MCPM TC2 backend, with all code needed to clean caches and exit coherency.
> > 
> > The multiple driver CPU idle infrastructure allows to define different
> > C-states for big and little cores, determined at boot by checking the
> > part id of the possible CPUs and initializing the respective logical
> > masks in the big and little drivers.
> > 
> > Current big.little systems are composed of A7 and A15 clusters, as
> > implemented in TC2, but in the future that may change and the driver
> > will have evolve to retrieve what is a 'big' cpu and what is a 'little'
> > cpu in order to build the correct topology.
> > 
> > Cc: Kevin Hilman <khilman@linaro.org>
> > Cc: Amit Kucheria <amit.kucheria@linaro.org>
> > Cc: Olof Johansson <olof@lixom.net>
> > Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
> > Cc: Rafael J. Wysocki <rjw@sisk.pl>
> > Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > ---
> 
> A nit below :/
> 
> [ ... ]
> 
> > +
> > +static struct cpuidle_driver bl_idle_big_driver = {
> > +	.name = "big_idle",
> > +	.owner = THIS_MODULE,
> > +	.states[0] = ARM_CPUIDLE_WFI_STATE,
> > +	.states[1] = {
> > +		.enter			= bl_enter_powerdown,
> > +
> > +		.exit_latency		= 500,
> 
> Extra line between enter and exit_latency.

Gah, not anymore :)

Other than that, is it ready to go ? If nobody complains I have planned
to send a pull request early next week, as soon as a stable branch for
TC2 MCPM gets in arm-soc.

Thanks,
Lorenzo

[PATCH v3 3/3] cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

[Lorenzo Pieralisi]

On Thu, Aug 08, 2013 at 05:00:24PM +0100, Daniel Lezcano wrote:
> On 08/07/2013 01:43 PM, Lorenzo Pieralisi wrote:
> > The big.LITTLE architecture is composed of two clusters of cpus. One cluster
> > contains less powerful but more energy efficient processors and the other
> > cluster groups the powerful but energy-intensive cpus.
> > 
> > The TC2 testchip implements two clusters of CPUs (A7 and A15 clusters in
> > a big.LITTLE configuration) connected through a CCI interconnect that manages
> > coherency of their respective L2 caches and intercluster distributed
> > virtual memory messages (DVM).
> > 
> > TC2 testchip integrates a power controller that manages cores resets, wake-up
> > IRQs and cluster low-power states. Power states are managed at cluster
> > level, which means that voltage is removed from a cluster iff all cores
> > in a cluster are in a wfi state. Single cores can enter a reset state
> > which is identical to wfi in terms of power consumption but simplifies the
> > way cluster states are entered.
> > 
> > This patch provides a multiple driver CPU idle implementation for TC2
> > which paves the way for a generic big.LITTLE idle driver for all
> > upcoming big.LITTLE based systems on chip.
> > 
> > The driver relies on the MCPM infrastructure to coordinate and manage
> > core power states; in particular MCPM allows to suspend specific cores
> > and hides the CPUs coordination required to shut-down clusters of CPUs.
> > 
> > Power down sequences for the respective clusters are implemented in the
> > MCPM TC2 backend, with all code needed to clean caches and exit coherency.
> > 
> > The multiple driver CPU idle infrastructure allows to define different
> > C-states for big and little cores, determined at boot by checking the
> > part id of the possible CPUs and initializing the respective logical
> > masks in the big and little drivers.
> > 
> > Current big.little systems are composed of A7 and A15 clusters, as
> > implemented in TC2, but in the future that may change and the driver
> > will have evolve to retrieve what is a 'big' cpu and what is a 'little'
> > cpu in order to build the correct topology.
> > 
> > Cc: Kevin Hilman <khilman@linaro.org>
> > Cc: Amit Kucheria <amit.kucheria@linaro.org>
> > Cc: Olof Johansson <olof@lixom.net>
> > Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
> > Cc: Rafael J. Wysocki <rjw@sisk.pl>
> > Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > ---
> 
> A nit below :/
> 
> [ ... ]
> 
> > +
> > +static struct cpuidle_driver bl_idle_big_driver = {
> > +	.name = "big_idle",
> > +	.owner = THIS_MODULE,
> > +	.states[0] = ARM_CPUIDLE_WFI_STATE,
> > +	.states[1] = {
> > +		.enter			= bl_enter_powerdown,
> > +
> > +		.exit_latency		= 500,
> 
> Extra line between enter and exit_latency.

Gah, not anymore :)

Other than that, is it ready to go ? If nobody complains I have planned
to send a pull request early next week, as soon as a stable branch for
TC2 MCPM gets in arm-soc.

Thanks,
Lorenzo

Re: [PATCH v3 3/3] cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

[Daniel Lezcano]

On 08/08/2013 06:18 PM, Lorenzo Pieralisi wrote:
> On Thu, Aug 08, 2013 at 05:00:24PM +0100, Daniel Lezcano wrote:
>> On 08/07/2013 01:43 PM, Lorenzo Pieralisi wrote:
>>> The big.LITTLE architecture is composed of two clusters of cpus. One cluster
>>> contains less powerful but more energy efficient processors and the other
>>> cluster groups the powerful but energy-intensive cpus.
>>>
>>> The TC2 testchip implements two clusters of CPUs (A7 and A15 clusters in
>>> a big.LITTLE configuration) connected through a CCI interconnect that manages
>>> coherency of their respective L2 caches and intercluster distributed
>>> virtual memory messages (DVM).
>>>
>>> TC2 testchip integrates a power controller that manages cores resets, wake-up
>>> IRQs and cluster low-power states. Power states are managed at cluster
>>> level, which means that voltage is removed from a cluster iff all cores
>>> in a cluster are in a wfi state. Single cores can enter a reset state
>>> which is identical to wfi in terms of power consumption but simplifies the
>>> way cluster states are entered.
>>>
>>> This patch provides a multiple driver CPU idle implementation for TC2
>>> which paves the way for a generic big.LITTLE idle driver for all
>>> upcoming big.LITTLE based systems on chip.
>>>
>>> The driver relies on the MCPM infrastructure to coordinate and manage
>>> core power states; in particular MCPM allows to suspend specific cores
>>> and hides the CPUs coordination required to shut-down clusters of CPUs.
>>>
>>> Power down sequences for the respective clusters are implemented in the
>>> MCPM TC2 backend, with all code needed to clean caches and exit coherency.
>>>
>>> The multiple driver CPU idle infrastructure allows to define different
>>> C-states for big and little cores, determined at boot by checking the
>>> part id of the possible CPUs and initializing the respective logical
>>> masks in the big and little drivers.
>>>
>>> Current big.little systems are composed of A7 and A15 clusters, as
>>> implemented in TC2, but in the future that may change and the driver
>>> will have evolve to retrieve what is a 'big' cpu and what is a 'little'
>>> cpu in order to build the correct topology.
>>>
>>> Cc: Kevin Hilman <khilman@linaro.org>
>>> Cc: Amit Kucheria <amit.kucheria@linaro.org>
>>> Cc: Olof Johansson <olof@lixom.net>
>>> Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
>>> Cc: Rafael J. Wysocki <rjw@sisk.pl>
>>> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>>> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>>> ---
>>
>> A nit below :/
>>
>> [ ... ]
>>
>>> +
>>> +static struct cpuidle_driver bl_idle_big_driver = {
>>> +	.name = "big_idle",
>>> +	.owner = THIS_MODULE,
>>> +	.states[0] = ARM_CPUIDLE_WFI_STATE,
>>> +	.states[1] = {
>>> +		.enter			= bl_enter_powerdown,
>>> +
>>> +		.exit_latency		= 500,
>>
>> Extra line between enter and exit_latency.
> 
> Gah, not anymore :)
> 
> Other than that, is it ready to go ? If nobody complains I have planned
> to send a pull request early next week, as soon as a stable branch for
> TC2 MCPM gets in arm-soc.


It sounds good to me.




-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[PATCH v3 3/3] cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

[Daniel Lezcano]

On 08/08/2013 06:18 PM, Lorenzo Pieralisi wrote:
> On Thu, Aug 08, 2013 at 05:00:24PM +0100, Daniel Lezcano wrote:
>> On 08/07/2013 01:43 PM, Lorenzo Pieralisi wrote:
>>> The big.LITTLE architecture is composed of two clusters of cpus. One cluster
>>> contains less powerful but more energy efficient processors and the other
>>> cluster groups the powerful but energy-intensive cpus.
>>>
>>> The TC2 testchip implements two clusters of CPUs (A7 and A15 clusters in
>>> a big.LITTLE configuration) connected through a CCI interconnect that manages
>>> coherency of their respective L2 caches and intercluster distributed
>>> virtual memory messages (DVM).
>>>
>>> TC2 testchip integrates a power controller that manages cores resets, wake-up
>>> IRQs and cluster low-power states. Power states are managed at cluster
>>> level, which means that voltage is removed from a cluster iff all cores
>>> in a cluster are in a wfi state. Single cores can enter a reset state
>>> which is identical to wfi in terms of power consumption but simplifies the
>>> way cluster states are entered.
>>>
>>> This patch provides a multiple driver CPU idle implementation for TC2
>>> which paves the way for a generic big.LITTLE idle driver for all
>>> upcoming big.LITTLE based systems on chip.
>>>
>>> The driver relies on the MCPM infrastructure to coordinate and manage
>>> core power states; in particular MCPM allows to suspend specific cores
>>> and hides the CPUs coordination required to shut-down clusters of CPUs.
>>>
>>> Power down sequences for the respective clusters are implemented in the
>>> MCPM TC2 backend, with all code needed to clean caches and exit coherency.
>>>
>>> The multiple driver CPU idle infrastructure allows to define different
>>> C-states for big and little cores, determined at boot by checking the
>>> part id of the possible CPUs and initializing the respective logical
>>> masks in the big and little drivers.
>>>
>>> Current big.little systems are composed of A7 and A15 clusters, as
>>> implemented in TC2, but in the future that may change and the driver
>>> will have evolve to retrieve what is a 'big' cpu and what is a 'little'
>>> cpu in order to build the correct topology.
>>>
>>> Cc: Kevin Hilman <khilman@linaro.org>
>>> Cc: Amit Kucheria <amit.kucheria@linaro.org>
>>> Cc: Olof Johansson <olof@lixom.net>
>>> Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
>>> Cc: Rafael J. Wysocki <rjw@sisk.pl>
>>> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>>> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>>> ---
>>
>> A nit below :/
>>
>> [ ... ]
>>
>>> +
>>> +static struct cpuidle_driver bl_idle_big_driver = {
>>> +	.name = "big_idle",
>>> +	.owner = THIS_MODULE,
>>> +	.states[0] = ARM_CPUIDLE_WFI_STATE,
>>> +	.states[1] = {
>>> +		.enter			= bl_enter_powerdown,
>>> +
>>> +		.exit_latency		= 500,
>>
>> Extra line between enter and exit_latency.
> 
> Gah, not anymore :)
> 
> Other than that, is it ready to go ? If nobody complains I have planned
> to send a pull request early next week, as soon as a stable branch for
> TC2 MCPM gets in arm-soc.


It sounds good to me.




-- 
 <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v3 3/3] cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

[Lorenzo Pieralisi]

On Fri, Aug 09, 2013 at 02:45:50PM +0100, Daniel Lezcano wrote:
> On 08/08/2013 06:18 PM, Lorenzo Pieralisi wrote:
> > On Thu, Aug 08, 2013 at 05:00:24PM +0100, Daniel Lezcano wrote:
> >> On 08/07/2013 01:43 PM, Lorenzo Pieralisi wrote:
> >>> The big.LITTLE architecture is composed of two clusters of cpus. One cluster
> >>> contains less powerful but more energy efficient processors and the other
> >>> cluster groups the powerful but energy-intensive cpus.
> >>>
> >>> The TC2 testchip implements two clusters of CPUs (A7 and A15 clusters in
> >>> a big.LITTLE configuration) connected through a CCI interconnect that manages
> >>> coherency of their respective L2 caches and intercluster distributed
> >>> virtual memory messages (DVM).
> >>>
> >>> TC2 testchip integrates a power controller that manages cores resets, wake-up
> >>> IRQs and cluster low-power states. Power states are managed at cluster
> >>> level, which means that voltage is removed from a cluster iff all cores
> >>> in a cluster are in a wfi state. Single cores can enter a reset state
> >>> which is identical to wfi in terms of power consumption but simplifies the
> >>> way cluster states are entered.
> >>>
> >>> This patch provides a multiple driver CPU idle implementation for TC2
> >>> which paves the way for a generic big.LITTLE idle driver for all
> >>> upcoming big.LITTLE based systems on chip.
> >>>
> >>> The driver relies on the MCPM infrastructure to coordinate and manage
> >>> core power states; in particular MCPM allows to suspend specific cores
> >>> and hides the CPUs coordination required to shut-down clusters of CPUs.
> >>>
> >>> Power down sequences for the respective clusters are implemented in the
> >>> MCPM TC2 backend, with all code needed to clean caches and exit coherency.
> >>>
> >>> The multiple driver CPU idle infrastructure allows to define different
> >>> C-states for big and little cores, determined at boot by checking the
> >>> part id of the possible CPUs and initializing the respective logical
> >>> masks in the big and little drivers.
> >>>
> >>> Current big.little systems are composed of A7 and A15 clusters, as
> >>> implemented in TC2, but in the future that may change and the driver
> >>> will have evolve to retrieve what is a 'big' cpu and what is a 'little'
> >>> cpu in order to build the correct topology.
> >>>
> >>> Cc: Kevin Hilman <khilman@linaro.org>
> >>> Cc: Amit Kucheria <amit.kucheria@linaro.org>
> >>> Cc: Olof Johansson <olof@lixom.net>
> >>> Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
> >>> Cc: Rafael J. Wysocki <rjw@sisk.pl>
> >>> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> >>> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> >>> ---
> >>
> >> A nit below :/
> >>
> >> [ ... ]
> >>
> >>> +
> >>> +static struct cpuidle_driver bl_idle_big_driver = {
> >>> +	.name = "big_idle",
> >>> +	.owner = THIS_MODULE,
> >>> +	.states[0] = ARM_CPUIDLE_WFI_STATE,
> >>> +	.states[1] = {
> >>> +		.enter			= bl_enter_powerdown,
> >>> +
> >>> +		.exit_latency		= 500,
> >>
> >> Extra line between enter and exit_latency.
> > 
> > Gah, not anymore :)
> > 
> > Other than that, is it ready to go ? If nobody complains I have planned
> > to send a pull request early next week, as soon as a stable branch for
> > TC2 MCPM gets in arm-soc.
> 
> 
> It sounds good to me.

Ok. Olof, Kevin, I prepared a pull request based on top of:

http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/190067.html

we probably need to fix a simple niggle in that code,

http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/191303.html

do you want me to wait for it before asking to pull, or I can send a PR
straight away and we will deal with conflicts (if any) later ?

Thanks,
Lorenzo

[PATCH v3 3/3] cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver

[Lorenzo Pieralisi]

On Fri, Aug 09, 2013 at 02:45:50PM +0100, Daniel Lezcano wrote:
> On 08/08/2013 06:18 PM, Lorenzo Pieralisi wrote:
> > On Thu, Aug 08, 2013 at 05:00:24PM +0100, Daniel Lezcano wrote:
> >> On 08/07/2013 01:43 PM, Lorenzo Pieralisi wrote:
> >>> The big.LITTLE architecture is composed of two clusters of cpus. One cluster
> >>> contains less powerful but more energy efficient processors and the other
> >>> cluster groups the powerful but energy-intensive cpus.
> >>>
> >>> The TC2 testchip implements two clusters of CPUs (A7 and A15 clusters in
> >>> a big.LITTLE configuration) connected through a CCI interconnect that manages
> >>> coherency of their respective L2 caches and intercluster distributed
> >>> virtual memory messages (DVM).
> >>>
> >>> TC2 testchip integrates a power controller that manages cores resets, wake-up
> >>> IRQs and cluster low-power states. Power states are managed at cluster
> >>> level, which means that voltage is removed from a cluster iff all cores
> >>> in a cluster are in a wfi state. Single cores can enter a reset state
> >>> which is identical to wfi in terms of power consumption but simplifies the
> >>> way cluster states are entered.
> >>>
> >>> This patch provides a multiple driver CPU idle implementation for TC2
> >>> which paves the way for a generic big.LITTLE idle driver for all
> >>> upcoming big.LITTLE based systems on chip.
> >>>
> >>> The driver relies on the MCPM infrastructure to coordinate and manage
> >>> core power states; in particular MCPM allows to suspend specific cores
> >>> and hides the CPUs coordination required to shut-down clusters of CPUs.
> >>>
> >>> Power down sequences for the respective clusters are implemented in the
> >>> MCPM TC2 backend, with all code needed to clean caches and exit coherency.
> >>>
> >>> The multiple driver CPU idle infrastructure allows to define different
> >>> C-states for big and little cores, determined at boot by checking the
> >>> part id of the possible CPUs and initializing the respective logical
> >>> masks in the big and little drivers.
> >>>
> >>> Current big.little systems are composed of A7 and A15 clusters, as
> >>> implemented in TC2, but in the future that may change and the driver
> >>> will have evolve to retrieve what is a 'big' cpu and what is a 'little'
> >>> cpu in order to build the correct topology.
> >>>
> >>> Cc: Kevin Hilman <khilman@linaro.org>
> >>> Cc: Amit Kucheria <amit.kucheria@linaro.org>
> >>> Cc: Olof Johansson <olof@lixom.net>
> >>> Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
> >>> Cc: Rafael J. Wysocki <rjw@sisk.pl>
> >>> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> >>> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> >>> ---
> >>
> >> A nit below :/
> >>
> >> [ ... ]
> >>
> >>> +
> >>> +static struct cpuidle_driver bl_idle_big_driver = {
> >>> +	.name = "big_idle",
> >>> +	.owner = THIS_MODULE,
> >>> +	.states[0] = ARM_CPUIDLE_WFI_STATE,
> >>> +	.states[1] = {
> >>> +		.enter			= bl_enter_powerdown,
> >>> +
> >>> +		.exit_latency		= 500,
> >>
> >> Extra line between enter and exit_latency.
> > 
> > Gah, not anymore :)
> > 
> > Other than that, is it ready to go ? If nobody complains I have planned
> > to send a pull request early next week, as soon as a stable branch for
> > TC2 MCPM gets in arm-soc.
> 
> 
> It sounds good to me.

Ok. Olof, Kevin, I prepared a pull request based on top of:

http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/190067.html

we probably need to fix a simple niggle in that code,

http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/191303.html

do you want me to wait for it before asking to pull, or I can send a PR
straight away and we will deal with conflicts (if any) later ?

Thanks,
Lorenzo