* [PATCH 1/1] ARM: dts: imx28-evk: Add pinctrl for USB OTG ID pin
@ 2013-08-23 5:56 Peter Chen
2013-08-23 10:41 ` Marek Vasut
2013-08-23 13:01 ` Fabio Estevam
0 siblings, 2 replies; 3+ messages in thread
From: Peter Chen @ 2013-08-23 5:56 UTC (permalink / raw)
To: linux-arm-kernel
After that, the dual-role switch can be used at imx28-evk.
Due to hardware limitations, it needs to switch VDD 5V
SOURCE SELECT to "USB 5V" if the user wants to use OTG
dual-role switch function. it needs to switch VDD 5V
SOURCE SELECT to "WALL 5V" if the user wants to Host 1.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
arch/arm/boot/dts/imx28-evk.dts | 2 ++
arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++
2 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 15715d9..fa48bd5 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -243,6 +243,8 @@
ahb at 80080000 {
usb0: usb at 80080000 {
vbus-supply = <®_usb0_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins_a>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 7363fde..54bd17c 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -731,6 +731,17 @@
fsl,pull-up = <0>;
};
+ usb0_pins_a: usb0 at 0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3071 /* MX28_PAD_AUART1_RTS__USB0_ID */
+ >;
+ fsl,drive-strength = <2>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+
usbphy1_pins_a: usbphy1 at 0 {
reg = <0>;
fsl,pinmux-ids = <
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 1/1] ARM: dts: imx28-evk: Add pinctrl for USB OTG ID pin
2013-08-23 5:56 [PATCH 1/1] ARM: dts: imx28-evk: Add pinctrl for USB OTG ID pin Peter Chen
@ 2013-08-23 10:41 ` Marek Vasut
2013-08-23 13:01 ` Fabio Estevam
1 sibling, 0 replies; 3+ messages in thread
From: Marek Vasut @ 2013-08-23 10:41 UTC (permalink / raw)
To: linux-arm-kernel
Dear Peter Chen,
> After that, the dual-role switch can be used at imx28-evk.
>
> Due to hardware limitations, it needs to switch VDD 5V
> SOURCE SELECT to "USB 5V" if the user wants to use OTG
> dual-role switch function. it needs to switch VDD 5V
> SOURCE SELECT to "WALL 5V" if the user wants to Host 1.
>
> Signed-off-by: Peter Chen <peter.chen@freescale.com>
> ---
> arch/arm/boot/dts/imx28-evk.dts | 2 ++
> arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++
> 2 files changed, 13 insertions(+), 0 deletions(-)
Thanks.
Acked-by: Marek Vasut <marex@denx.de>
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 1/1] ARM: dts: imx28-evk: Add pinctrl for USB OTG ID pin
2013-08-23 5:56 [PATCH 1/1] ARM: dts: imx28-evk: Add pinctrl for USB OTG ID pin Peter Chen
2013-08-23 10:41 ` Marek Vasut
@ 2013-08-23 13:01 ` Fabio Estevam
1 sibling, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2013-08-23 13:01 UTC (permalink / raw)
To: linux-arm-kernel
Hi Peter,
On Fri, Aug 23, 2013 at 2:56 AM, Peter Chen <peter.chen@freescale.com> wrote:
> After that, the dual-role switch can be used at imx28-evk.
>
> Due to hardware limitations, it needs to switch VDD 5V
> SOURCE SELECT to "USB 5V" if the user wants to use OTG
> dual-role switch function. it needs to switch VDD 5V
> SOURCE SELECT to "WALL 5V" if the user wants to Host 1.
>
> Signed-off-by: Peter Chen <peter.chen@freescale.com>
I have already sent this:
http://www.spinics.net/lists/arm-kernel/msg268746.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-08-23 13:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-23 5:56 [PATCH 1/1] ARM: dts: imx28-evk: Add pinctrl for USB OTG ID pin Peter Chen
2013-08-23 10:41 ` Marek Vasut
2013-08-23 13:01 ` Fabio Estevam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.