* [U-Boot] [PATCH v5 0/4] arm64 patch
@ 2013-08-24 1:06 fenghua at phytium.com.cn
2013-08-24 1:06 ` fenghua at phytium.com.cn
` (10 more replies)
0 siblings, 11 replies; 18+ messages in thread
From: fenghua at phytium.com.cn @ 2013-08-24 1:06 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
The porting has been merged with arm architecture.
Most architecture codes are placed in arch/arm/cpu/armv8 directory.
Generic board is also supported after a few bugs are fixed.
Changes for v4:
- fix the generic board_f.c, remove zero_global_data from init_sequence_f array
and move it to board_init_f() function with CONFIG_X86 switch. The previous
fixup is inaccurate.
- Replace __ARMEB__ with __AARCH64EB__ in byteorder.h and unaligned.h,
gcc for aarch64 use __AARCH64EB__ and __AARCH64EL__ to identify endian.
- Some modification to README.armv8
David Feng (4):
core support of arm64
board support of arm64
generic board patch of manual reloc and zero gd_t
64bit initrd start address support
arch/arm/config.mk | 4 +
arch/arm/cpu/armv8/Makefile | 56 ++++
arch/arm/cpu/armv8/cache.S | 145 ++++++++++
arch/arm/cpu/armv8/cache_v8.c | 291 ++++++++++++++++++++
arch/arm/cpu/armv8/config.mk | 31 +++
arch/arm/cpu/armv8/cpu.c | 68 +++++
arch/arm/cpu/armv8/crt0.S | 130 +++++++++
arch/arm/cpu/armv8/exceptions.S | 182 +++++++++++++
arch/arm/cpu/armv8/interrupts.c | 116 ++++++++
arch/arm/cpu/armv8/relocate.S | 71 +++++
arch/arm/cpu/armv8/start.S | 200 ++++++++++++++
arch/arm/cpu/armv8/timer.c | 95 +++++++
arch/arm/cpu/armv8/tlb.S | 38 +++
arch/arm/cpu/armv8/u-boot.lds | 83 ++++++
arch/arm/include/asm/arch-armv8/armv8.h | 44 ++++
arch/arm/include/asm/arch-armv8/gpio.h | 26 ++
arch/arm/include/asm/arch-armv8/mmu.h | 117 ++++++++
arch/arm/include/asm/byteorder.h | 12 +
arch/arm/include/asm/config.h | 10 +
arch/arm/include/asm/global_data.h | 6 +-
arch/arm/include/asm/io.h | 12 +-
arch/arm/include/asm/macro.h | 26 ++
arch/arm/include/asm/posix_types.h | 31 +++
arch/arm/include/asm/proc-armv/ptrace.h | 38 +++
arch/arm/include/asm/proc-armv/system.h | 58 +++-
arch/arm/include/asm/types.h | 14 +
arch/arm/include/asm/u-boot.h | 4 +
arch/arm/include/asm/unaligned.h | 14 +
arch/arm/lib/Makefile | 8 +
arch/arm/lib/board.c | 18 ++
arch/arm/lib/bootm.c | 16 ++
board/armltd/dts/vexpress64.dts | 439 +++++++++++++++++++++++++++++++
board/armltd/vexpress64/Makefile | 43 +++
board/armltd/vexpress64/vexpress64.c | 79 ++++++
boards.cfg | 1 +
common/board_f.c | 19 +-
common/board_r.c | 17 ++
common/fdt_support.c | 66 ++---
common/image.c | 1 +
doc/README.armv8 | 14 +
examples/standalone/stubs.c | 15 ++
include/configs/vexpress_aemv8a.h | 203 ++++++++++++++
include/image.h | 1 +
43 files changed, 2816 insertions(+), 46 deletions(-)
create mode 100644 arch/arm/cpu/armv8/Makefile
create mode 100644 arch/arm/cpu/armv8/cache.S
create mode 100644 arch/arm/cpu/armv8/cache_v8.c
create mode 100644 arch/arm/cpu/armv8/config.mk
create mode 100644 arch/arm/cpu/armv8/cpu.c
create mode 100644 arch/arm/cpu/armv8/crt0.S
create mode 100644 arch/arm/cpu/armv8/exceptions.S
create mode 100644 arch/arm/cpu/armv8/interrupts.c
create mode 100644 arch/arm/cpu/armv8/relocate.S
create mode 100644 arch/arm/cpu/armv8/start.S
create mode 100644 arch/arm/cpu/armv8/timer.c
create mode 100644 arch/arm/cpu/armv8/tlb.S
create mode 100644 arch/arm/cpu/armv8/u-boot.lds
create mode 100644 arch/arm/include/asm/arch-armv8/armv8.h
create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
create mode 100644 board/armltd/dts/vexpress64.dts
create mode 100644 board/armltd/vexpress64/Makefile
create mode 100644 board/armltd/vexpress64/vexpress64.c
create mode 100644 doc/README.armv8
create mode 100644 include/configs/vexpress_aemv8a.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 0/4] arm64 patch
2013-08-24 1:06 [U-Boot] [PATCH v5 0/4] arm64 patch fenghua at phytium.com.cn
@ 2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-24 1:06 ` [U-Boot] [PATCH v5 1/4] core support of arm64 fenghua at phytium.com.cn
` (9 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: fenghua at phytium.com.cn @ 2013-08-24 1:06 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
The porting has been merged with arm architecture.
Most architecture codes are placed in arch/arm/cpu/armv8 directory.
Generic board is also supported after a few bugs are fixed.
Changes for v4:
- fix the generic board_f.c, remove zero_global_data from init_sequence_f array
and move it to board_init_f() function with CONFIG_X86 switch. The previous
fixup is inaccurate.
- Replace __ARMEB__ with __AARCH64EB__ in byteorder.h and unaligned.h,
gcc for aarch64 use __AARCH64EB__ and __AARCH64EL__ to identify endian.
- Some modification to README.armv8
David Feng (4):
core support of arm64
board support of arm64
generic board patch of manual reloc and zero gd_t
64bit initrd start address support
arch/arm/config.mk | 4 +
arch/arm/cpu/armv8/Makefile | 56 ++++
arch/arm/cpu/armv8/cache.S | 145 ++++++++++
arch/arm/cpu/armv8/cache_v8.c | 291 ++++++++++++++++++++
arch/arm/cpu/armv8/config.mk | 31 +++
arch/arm/cpu/armv8/cpu.c | 68 +++++
arch/arm/cpu/armv8/crt0.S | 130 +++++++++
arch/arm/cpu/armv8/exceptions.S | 182 +++++++++++++
arch/arm/cpu/armv8/interrupts.c | 116 ++++++++
arch/arm/cpu/armv8/relocate.S | 71 +++++
arch/arm/cpu/armv8/start.S | 200 ++++++++++++++
arch/arm/cpu/armv8/timer.c | 95 +++++++
arch/arm/cpu/armv8/tlb.S | 38 +++
arch/arm/cpu/armv8/u-boot.lds | 83 ++++++
arch/arm/include/asm/arch-armv8/armv8.h | 44 ++++
arch/arm/include/asm/arch-armv8/gpio.h | 26 ++
arch/arm/include/asm/arch-armv8/mmu.h | 117 ++++++++
arch/arm/include/asm/byteorder.h | 12 +
arch/arm/include/asm/config.h | 10 +
arch/arm/include/asm/global_data.h | 6 +-
arch/arm/include/asm/io.h | 12 +-
arch/arm/include/asm/macro.h | 26 ++
arch/arm/include/asm/posix_types.h | 31 +++
arch/arm/include/asm/proc-armv/ptrace.h | 38 +++
arch/arm/include/asm/proc-armv/system.h | 58 +++-
arch/arm/include/asm/types.h | 14 +
arch/arm/include/asm/u-boot.h | 4 +
arch/arm/include/asm/unaligned.h | 14 +
arch/arm/lib/Makefile | 8 +
arch/arm/lib/board.c | 18 ++
arch/arm/lib/bootm.c | 16 ++
board/armltd/dts/vexpress64.dts | 439 +++++++++++++++++++++++++++++++
board/armltd/vexpress64/Makefile | 43 +++
board/armltd/vexpress64/vexpress64.c | 79 ++++++
boards.cfg | 1 +
common/board_f.c | 19 +-
common/board_r.c | 17 ++
common/fdt_support.c | 66 ++---
common/image.c | 1 +
doc/README.armv8 | 14 +
examples/standalone/stubs.c | 15 ++
include/configs/vexpress_aemv8a.h | 203 ++++++++++++++
include/image.h | 1 +
43 files changed, 2816 insertions(+), 46 deletions(-)
create mode 100644 arch/arm/cpu/armv8/Makefile
create mode 100644 arch/arm/cpu/armv8/cache.S
create mode 100644 arch/arm/cpu/armv8/cache_v8.c
create mode 100644 arch/arm/cpu/armv8/config.mk
create mode 100644 arch/arm/cpu/armv8/cpu.c
create mode 100644 arch/arm/cpu/armv8/crt0.S
create mode 100644 arch/arm/cpu/armv8/exceptions.S
create mode 100644 arch/arm/cpu/armv8/interrupts.c
create mode 100644 arch/arm/cpu/armv8/relocate.S
create mode 100644 arch/arm/cpu/armv8/start.S
create mode 100644 arch/arm/cpu/armv8/timer.c
create mode 100644 arch/arm/cpu/armv8/tlb.S
create mode 100644 arch/arm/cpu/armv8/u-boot.lds
create mode 100644 arch/arm/include/asm/arch-armv8/armv8.h
create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
create mode 100644 board/armltd/dts/vexpress64.dts
create mode 100644 board/armltd/vexpress64/Makefile
create mode 100644 board/armltd/vexpress64/vexpress64.c
create mode 100644 doc/README.armv8
create mode 100644 include/configs/vexpress_aemv8a.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 1/4] core support of arm64
2013-08-24 1:06 [U-Boot] [PATCH v5 0/4] arm64 patch fenghua at phytium.com.cn
2013-08-24 1:06 ` fenghua at phytium.com.cn
@ 2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-09-06 20:31 ` Scott Wood
2013-08-24 1:06 ` fenghua at phytium.com.cn
` (8 subsequent siblings)
10 siblings, 1 reply; 18+ messages in thread
From: fenghua at phytium.com.cn @ 2013-08-24 1:06 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
Changeds for v4:
- Replace __ARMEB__ with __AARCH64EB__ in byteorder.h and unaligned.h,
gcc for aarch64 use __AARCH64EB__ and __AARCH64EL__ to identify endian.
- Some modification to README.armv8
arch/arm/config.mk | 4 +
arch/arm/cpu/armv8/Makefile | 56 ++++++
arch/arm/cpu/armv8/cache.S | 145 +++++++++++++++
arch/arm/cpu/armv8/cache_v8.c | 291 +++++++++++++++++++++++++++++++
arch/arm/cpu/armv8/config.mk | 31 ++++
arch/arm/cpu/armv8/cpu.c | 68 ++++++++
arch/arm/cpu/armv8/crt0.S | 130 ++++++++++++++
arch/arm/cpu/armv8/exceptions.S | 182 +++++++++++++++++++
arch/arm/cpu/armv8/interrupts.c | 116 ++++++++++++
arch/arm/cpu/armv8/relocate.S | 71 ++++++++
arch/arm/cpu/armv8/start.S | 200 +++++++++++++++++++++
arch/arm/cpu/armv8/timer.c | 95 ++++++++++
arch/arm/cpu/armv8/tlb.S | 38 ++++
arch/arm/cpu/armv8/u-boot.lds | 83 +++++++++
arch/arm/include/asm/arch-armv8/armv8.h | 44 +++++
arch/arm/include/asm/arch-armv8/gpio.h | 26 +++
arch/arm/include/asm/arch-armv8/mmu.h | 117 +++++++++++++
arch/arm/include/asm/byteorder.h | 12 ++
arch/arm/include/asm/config.h | 10 ++
arch/arm/include/asm/global_data.h | 6 +-
arch/arm/include/asm/io.h | 12 +-
arch/arm/include/asm/macro.h | 26 +++
arch/arm/include/asm/posix_types.h | 31 ++++
arch/arm/include/asm/proc-armv/ptrace.h | 38 ++++
arch/arm/include/asm/proc-armv/system.h | 58 +++++-
arch/arm/include/asm/types.h | 14 ++
arch/arm/include/asm/u-boot.h | 4 +
arch/arm/include/asm/unaligned.h | 14 ++
arch/arm/lib/Makefile | 8 +
arch/arm/lib/board.c | 18 ++
arch/arm/lib/bootm.c | 16 ++
common/image.c | 1 +
doc/README.armv8 | 14 ++
examples/standalone/stubs.c | 15 ++
include/image.h | 1 +
35 files changed, 1987 insertions(+), 8 deletions(-)
create mode 100644 arch/arm/cpu/armv8/Makefile
create mode 100644 arch/arm/cpu/armv8/cache.S
create mode 100644 arch/arm/cpu/armv8/cache_v8.c
create mode 100644 arch/arm/cpu/armv8/config.mk
create mode 100644 arch/arm/cpu/armv8/cpu.c
create mode 100644 arch/arm/cpu/armv8/crt0.S
create mode 100644 arch/arm/cpu/armv8/exceptions.S
create mode 100644 arch/arm/cpu/armv8/interrupts.c
create mode 100644 arch/arm/cpu/armv8/relocate.S
create mode 100644 arch/arm/cpu/armv8/start.S
create mode 100644 arch/arm/cpu/armv8/timer.c
create mode 100644 arch/arm/cpu/armv8/tlb.S
create mode 100644 arch/arm/cpu/armv8/u-boot.lds
create mode 100644 arch/arm/include/asm/arch-armv8/armv8.h
create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
create mode 100644 doc/README.armv8
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index ce3903b..f1c6a7b 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -74,7 +74,9 @@ endif
endif
# needed for relocation
+ifndef CONFIG_ARMV8
LDFLAGS_u-boot += -pie
+endif
#
# FIXME: binutils versions < 2.22 have a bug in the assembler where
@@ -95,6 +97,8 @@ endif
endif
# check that only R_ARM_RELATIVE relocations are generated
+ifndef CONFIG_ARMV8
ifneq ($(CONFIG_SPL_BUILD),y)
ALL-y += checkarmreloc
endif
+endif
diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile
new file mode 100644
index 0000000..55fd365
--- /dev/null
+++ b/arch/arm/cpu/armv8/Makefile
@@ -0,0 +1,56 @@
+#
+# Copyright (c) 2013 FengHua <fenghua@phytium.com.cn>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).o
+
+START := start.o
+
+COBJS += cpu.o
+COBJS += timer.o
+COBJS += cache_v8.o
+COBJS += interrupts.o
+
+SOBJS += crt0.o
+SOBJS += relocate.o
+SOBJS += exceptions.o
+SOBJS += cache.o
+SOBJS += tlb.o
+
+SRCS := $(START:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S
new file mode 100644
index 0000000..b1a95ec
--- /dev/null
+++ b/arch/arm/cpu/armv8/cache.S
@@ -0,0 +1,145 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * void __asm_flush_dcache_level(level)
+ *
+ * clean and invalidate one level cache.
+ *
+ * x0: cache level
+ * x1~x9: clobbered
+ */
+ENTRY(__asm_flush_dcache_level)
+ lsl x1, x0, #1
+ msr csselr_el1, x1 /* select cache level */
+ isb /* isb to sych the new cssr&csidr */
+ mrs x6, ccsidr_el1 /* read the new ccsidr */
+ and x2, x6, #7 /* x2 = length of the cache lines */
+ add x2, x2, #4 /* add 4 (line length offset) */
+ mov x3, #0x3ff
+ and x3, x3, x6, lsr #3 /* x3 = maximum number of the way size */
+ clz w5, w3 /* bit position of way size */
+ mov x4, #0x7fff
+ and x4, x4, x1, lsr #13 /* x4 = max number of the set size */
+ /* x1 = cache level << 1 */
+ /* x2 = line length offset */
+ /* x3 = number of cache ways */
+ /* x4 = number of cache sets */
+ /* x5 = bit position of way size */
+
+loop_set:
+ mov x6, x3 /* create working copy of way size */
+loop_way:
+ lsl x7, x6, x5
+ orr x9, x0, x7 /* map way and level to cisw value */
+ lsl x7, x4, x2
+ orr x9, x9, x7 /* map set number to cisw value */
+ dc cisw, x9 /* clean & invalidate by set/way */
+ subs x6, x6, #1 /* decrement the way */
+ b.ge loop_way
+ subs x4, x4, #1 /* decrement the set */
+ b.ge loop_set
+
+ ret
+ENDPROC(__asm_flush_dcache_level)
+
+/*
+ * void __asm_flush_dcache_all(void)
+ *
+ * clean and invalidate all data cache by SET/WAY.
+ */
+ENTRY(__asm_flush_dcache_all)
+ dsb sy
+ mov x15, lr
+ mrs x10, clidr_el1 /* read clidr */
+ lsr x11, x10, #24
+ and x11, x11, #0x7 /* x11 = loc */
+ cbz x11, finished /* if loc = 0, no need to clean */
+ mov x0, #0 /* start flush at cache level 0 */
+ /* x0 = level */
+ /* x10 = clidr_el1 */
+ /* x11 = loc */
+
+loop_level:
+ lsl x1, x0, #1
+ add x1, x1, x0 /* x0 = 3x cache level */
+ lsr x1, x10, x1
+ and x1, x1, #7 /* x1 = cache type */
+ cmp x1, #2
+ b.lt skip /* skip if no cache or icache */
+ bl __asm_flush_dcache_level /* flush dcache of level */
+skip:
+ add x0, x0, #1 /* increment cache level */
+ cmp x11, x0
+ b.gt loop_level
+
+finished:
+ mov x0, #0
+ msr csselr_el1, x0 /* swith back to cache level 0 */
+ dsb sy
+ isb
+ mov lr, x15
+ ret
+ENDPROC(__asm_flush_dcache_all)
+
+/*
+ * void __asm_flush_dcache_range(start, end)
+ *
+ * clean & invalidate data cache in the range
+ *
+ * x0: start address
+ * x1: end address
+ */
+ENTRY(__asm_flush_dcache_range)
+ mrs x3, ctr_el0 /* read CTR */
+ lsr x3, x3, #16
+ and x3, x3, #0xf /* cache line size encoding */
+ mov x2, #4 /* bytes per word */
+ lsl x2, x2, x3 /* actual cache line size */
+
+ /* x2 = minimal cache line size in cache system */
+ sub x3, x2, #1
+ bic x0, x0, x3
+1: dc civac, x0 /* clean & invalidate D line / unified line */
+ add x0, x0, x2
+ cmp x0, x1
+ b.lo 1b
+ dsb sy
+ ret
+ENDPROC(__asm_flush_dcache_range)
+
+/*
+ * void __asm_invalidate_icache_all(void)
+ *
+ * invalidate all tlb entries.
+ */
+ENTRY(__asm_invalidate_icache_all)
+ ic ialluis
+ isb sy
+ ret
+ENDPROC(__asm_invalidate_icache_all)
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
new file mode 100644
index 0000000..be2b49f
--- /dev/null
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -0,0 +1,291 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/armv8.h>
+#include <asm/arch/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void __asm_flush_dcache_all(void);
+extern void __asm_flush_dcache_range(u64 start, u64 end);
+extern void __asm_invalidate_tlb_all(void);
+extern void __asm_invalidate_icache_all(void);
+
+static inline unsigned int get_sctlr(void)
+{
+ unsigned int val;
+ asm volatile("mrs %0, sctlr_el2" : "=r" (val) : : "cc");
+ return val;
+}
+
+static inline void set_sctlr(unsigned int val)
+{
+ asm volatile("msr sctlr_el2, %0" : : "r" (val) : "cc");
+ asm volatile("isb");
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+
+static void set_pgtable_section(u64 section, u64 memory_type)
+{
+ u64 *page_table = (u64 *)gd->arch.tlb_addr;
+ u64 value;
+
+ value = (section << SECTION_SHIFT) | PMD_TYPE_SECT | PMD_SECT_AF;
+ value |= PMD_ATTRINDX(memory_type);
+ page_table[section] = value;
+}
+
+/* to activate the MMU we need to set up virtual memory */
+static inline void mmu_setup(void)
+{
+ int i, j;
+ bd_t *bd = gd->bd;
+ static int table_initialized = 0;
+
+ if (!table_initialized) {
+ /* Setup an identity-mapping for all spaces */
+ for (i = 0; i < (PAGE_SIZE >> 3); i++)
+ set_pgtable_section(i, MT_DEVICE_nGnRnE);
+
+ /* Setup an identity-mapping for all RAM space */
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ debug("%s: bank: %d\n", __func__, i);
+ for (j = bd->bi_dram[i].start >> SECTION_SHIFT;
+ j < (bd->bi_dram[i].start + bd->bi_dram[i].size) >> SECTION_SHIFT;
+ j++) {
+ set_pgtable_section(i, MT_NORMAL);
+ }
+ }
+
+ /* load TTBR0 */
+ asm volatile("msr ttbr0_el2, %0" : : "r" (gd->arch.tlb_addr) : "memory");
+
+ table_initialized = 1;
+ }
+
+ /* and enable the mmu */
+ set_sctlr(get_sctlr() | CR_M);
+}
+
+/*
+ * Performs a invalidation of the entire data cache
+ * at all levels
+ */
+void invalidate_dcache_all(void)
+{
+ __asm_flush_dcache_all();
+ v8_outer_cache_inval_all();
+}
+
+/*
+ * Performs a clean & invalidation of the entire data cache
+ * at all levels
+ */
+void flush_dcache_all(void)
+{
+ __asm_flush_dcache_all();
+ v8_outer_cache_flush_all();
+}
+
+/*
+ * Invalidates range in all levels of D-cache/unified cache used:
+ * Affects the range [start, stop - 1]
+ */
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+ __asm_flush_dcache_range(start, stop);
+ v8_outer_cache_inval_range(start, stop);
+}
+
+/*
+ * Flush range(clean & invalidate) from all levels of D-cache/unified
+ * cache used:
+ * Affects the range [start, stop - 1]
+ */
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+ __asm_flush_dcache_range(start, stop);
+ v8_outer_cache_flush_range(start, stop);
+}
+
+void dcache_enable(void)
+{
+ uint32_t sctlr;
+
+ sctlr = get_sctlr();
+
+ /* The data cache is not active unless the mmu is enabled too */
+ if (!(sctlr & CR_M)) {
+ v8_outer_cache_enable();
+ invalidate_dcache_all();
+ __asm_invalidate_tlb_all();
+
+ mmu_setup();
+ }
+
+ set_sctlr(sctlr | CR_C);
+}
+
+void dcache_disable(void)
+{
+ uint32_t sctlr;
+
+ sctlr = get_sctlr();
+
+ /* if cache isn't enabled no need to disable */
+ if (!(sctlr & CR_C))
+ return;
+
+ set_sctlr(sctlr & ~(CR_C|CR_M));
+
+ flush_dcache_all();
+ __asm_invalidate_tlb_all();
+}
+
+int dcache_status(void)
+{
+ return (get_sctlr() & CR_C) != 0;
+}
+
+#else /* CONFIG_SYS_DCACHE_OFF */
+
+void invalidate_dcache_all(void)
+{
+}
+
+void flush_dcache_all(void)
+{
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void dcache_enable(void)
+{
+}
+
+void dcache_disable(void)
+{
+}
+
+int dcache_status(void)
+{
+ return 0;
+}
+
+#endif /* CONFIG_SYS_DCACHE_OFF */
+
+#ifndef CONFIG_SYS_ICACHE_OFF
+
+void icache_enable(void)
+{
+ set_sctlr(get_sctlr() | CR_I);
+}
+
+void icache_disable(void)
+{
+ set_sctlr(get_sctlr() & ~CR_I);
+}
+
+int icache_status(void)
+{
+ return (get_sctlr() & CR_I) != 0;
+}
+
+void invalidate_icache_all(void)
+{
+ __asm_invalidate_icache_all();
+}
+
+#else /* CONFIG_SYS_ICACHE_OFF */
+
+void icache_enable(void)
+{
+}
+
+void icache_disable(void)
+{
+}
+
+int icache_status(void)
+{
+ return 0;
+}
+
+void invalidate_icache_all(void)
+{
+}
+
+#endif /* CONFIG_SYS_ICACHE_OFF */
+
+/*
+ * Enable dCache & iCache, whether cache is actually enabled
+ * depend on CONFIG_SYS_DCACHE_OFF and CONFIG_SYS_ICACHE_OFF
+ */
+void enable_caches(void)
+{
+ icache_enable();
+ dcache_enable();
+}
+
+/*
+ * Flush range from all levels of d-cache/unified-cache used:
+ * Affects the range [start, start + size - 1]
+ */
+void flush_cache(unsigned long start, unsigned long size)
+{
+ flush_dcache_range(start, start + size);
+}
+
+/*
+ * Stub implementations for outer cache operations
+ */
+void __v8_outer_cache_enable(void) {}
+void v8_outer_cache_enable(void)
+ __attribute__((weak, alias("__v8_outer_cache_enable")));
+
+void __v8_outer_cache_disable(void) {}
+void v8_outer_cache_disable(void)
+ __attribute__((weak, alias("__v8_outer_cache_disable")));
+
+void __v8_outer_cache_flush_all(void) {}
+void v8_outer_cache_flush_all(void)
+ __attribute__((weak, alias("__v8_outer_cache_flush_all")));
+
+void __v8_outer_cache_inval_all(void) {}
+void v8_outer_cache_inval_all(void)
+ __attribute__((weak, alias("__v8_outer_cache_inval_all")));
+
+void __v8_outer_cache_flush_range(u64 start, u64 end) {}
+void v8_outer_cache_flush_range(u64 start, u64 end)
+ __attribute__((weak, alias("__v8_outer_cache_flush_range")));
+
+void __v8_outer_cache_inval_range(u64 start, u64 end) {}
+void v8_outer_cache_inval_range(u64 start, u64 end)
+ __attribute__((weak, alias("__v8_outer_cache_inval_range")));
diff --git a/arch/arm/cpu/armv8/config.mk b/arch/arm/cpu/armv8/config.mk
new file mode 100644
index 0000000..aae2170
--- /dev/null
+++ b/arch/arm/cpu/armv8/config.mk
@@ -0,0 +1,31 @@
+#
+# Copyright (c) 2013 FengHua <fenghua@phytium.com.cn>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+PLATFORM_RELFLAGS += -fno-common -ffixed-x18
+
+# SEE README.arm-unaligned-accesses
+PF_NO_UNALIGNED := $(call cc-option, -mstrict-align)
+PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
+
+PF_CPPFLAGS_ARMV8 := $(call cc-option, -march=armv8-a)
+PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV8)
+PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
+PLATFORM_CPPFLAGS += -fpic
diff --git a/arch/arm/cpu/armv8/cpu.c b/arch/arm/cpu/armv8/cpu.c
new file mode 100644
index 0000000..5db7505
--- /dev/null
+++ b/arch/arm/cpu/armv8/cpu.c
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2008 Texas Insturments
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/arch/armv8.h>
+#include <linux/compiler.h>
+
+void __weak cpu_cache_initialization(void){}
+
+int cleanup_before_linux(void)
+{
+ /*
+ * this function is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we turn off caches etc ...
+ */
+#ifndef CONFIG_SPL_BUILD
+ disable_interrupts();
+#endif
+
+ /*
+ * Turn off I-cache and invalidate it
+ */
+ icache_disable();
+ invalidate_icache_all();
+
+ /*
+ * turn off D-cache
+ * dcache_disable() in turn flushes the d-cache and disables MMU
+ */
+ dcache_disable();
+ v8_outer_cache_disable();
+
+ /*
+ * After D-cache is flushed and before it is disabled there may
+ * be some new valid entries brought into the cache. We are sure
+ * that these lines are not dirty and will not affect our execution.
+ * (because unwinding the call-stack and setting a bit in CP15 SCTRL
+ * is all we did during this. We have not pushed anything on to the
+ * stack. Neither have we affected any static data)
+ * So just invalidate the entire d-cache again to avoid coherency
+ * problems for kernel
+ */
+ invalidate_dcache_all();
+
+ /*
+ * Some CPU need more cache attention before starting the kernel.
+ */
+ cpu_cache_initialization();
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv8/crt0.S b/arch/arm/cpu/armv8/crt0.S
new file mode 100644
index 0000000..fe39495
--- /dev/null
+++ b/arch/arm/cpu/armv8/crt0.S
@@ -0,0 +1,130 @@
+/*
+ * crt0 - C-runtime startup Code for ARM64 U-Boot
+ *
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * Bsed on arm/lib/crt0.S by Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm-offsets.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * This file handles the target-independent stages of the U-Boot
+ * start-up where a C runtime environment is needed. Its entry point
+ * is _main and is branched into from the target's start.S file.
+ *
+ * _main execution sequence is:
+ *
+ * 1. Set up initial environment for calling board_init_f().
+ * This environment only provides a stack and a place to store
+ * the GD ('global data') structure, both located in some readily
+ * available RAM (SRAM, locked cache...). In this context, VARIABLE
+ * global data, initialized or not (BSS), are UNAVAILABLE; only
+ * CONSTANT initialized data are available.
+ *
+ * 2. Call board_init_f(). This function prepares the hardware for
+ * execution from system RAM (DRAM, DDR...) As system RAM may not
+ * be available yet, , board_init_f() must use the current GD to
+ * store any data which must be passed on to later stages. These
+ * data include the relocation destination, the future stack, and
+ * the future GD location.
+ *
+ * (the following applies only to non-SPL builds)
+ *
+ * 3. Set up intermediate environment where the stack and GD are the
+ * ones allocated by board_init_f() in system RAM, but BSS and
+ * initialized non-const data are still not available.
+ *
+ * 4. Call relocate_code(). This function relocates U-Boot from its
+ * current location into the relocation destination computed by
+ * board_init_f().
+ *
+ * 5. Set up final environment for calling board_init_r(). This
+ * environment has BSS (initialized to 0), initialized non-const
+ * data (initialized to their intended value), and stack in system
+ * RAM. GD has retained values set by board_init_f(). Some CPUs
+ * have some work left to do at this point regarding memory, so
+ * call c_runtime_cpu_setup.
+ *
+ * 6. Branch to board_init_r().
+ */
+
+ENTRY(_main)
+
+/*
+ * Set up initial C runtime environment and call board_init_f(0).
+ */
+ ldr x0, =(CONFIG_SYS_INIT_SP_ADDR)
+ sub x0, x0, #GD_SIZE /* allocate one GD above SP */
+ bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */
+ mov x18, sp /* GD is above SP */
+ mov x0, #0
+ bl board_init_f
+
+/*
+ * Set up intermediate environment (new sp and gd) and call
+ * relocate_code(addr_moni). Trick here is that we'll return
+ * 'here' but relocated.
+ */
+ ldr x0, [x18, #GD_START_ADDR_SP] /* x0 = gd->start_addr_sp */
+ bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */
+ ldr x18, [x18, #GD_BD] /* x18 = gd->bd */
+ sub x18, x18, #GD_SIZE /* new GD is below bd */
+
+ adr lr, relocation_return
+ ldr x9, [x18, #GD_RELOC_OFF] /* x0 = gd->reloc_off */
+ add lr, lr, x9 /* new return address after relocation */
+ ldr x0, [x18, #GD_RELOCADDR] /* x0 = gd->relocaddr */
+ b relocate_code
+
+relocation_return:
+
+/*
+ * Set up final (full) environment
+ */
+ bl c_runtime_cpu_setup /* we still call old routine here */
+
+/*
+ * Clear BSS section
+ */
+ ldr x9, [x18, #GD_RELOC_OFF] /* x9 = gd->reloc_off */
+ ldr x0, =__bss_start /* x0 = __bss_start in FLASH */
+ add x0, x0, x9 /* x0 = __bss_start in RAM */
+ ldr x1, =__bss_end /* x1 = __bss_end in FLASH */
+ add x1, x1, x9 /* x1 = __bss_end in RAM */
+ mov x2, #0
+clear_loop:
+ str x2, [x0]
+ add x0, x0, #8
+ cmp x0, x1
+ b.lo clear_loop
+
+ /* call board_init_r(gd_t *id, ulong dest_addr) */
+ mov x0, x18 /* gd_t */
+ ldr x1, [x18, #GD_RELOCADDR] /* dest_addr */
+ b board_init_r /* PC relative jump */
+
+ /* NOTREACHED - board_init_r() does not return */
+
+ENDPROC(_main)
diff --git a/arch/arm/cpu/armv8/exceptions.S b/arch/arm/cpu/armv8/exceptions.S
new file mode 100644
index 0000000..c64a326
--- /dev/null
+++ b/arch/arm/cpu/armv8/exceptions.S
@@ -0,0 +1,182 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <asm/ptrace.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * Exception vectors.
+ */
+ .align 11
+ENTRY(vectors)
+ ventry el_current_sync_invalid /* Current EL Synchronous Thread */
+ ventry el_current_irq_invalid /* Current EL IRQ Thread */
+ ventry el_current_fiq_invalid /* Current EL FIQ Thread */
+ ventry el_current_error_invalid /* Current EL Error Thread */
+
+ ventry el_current_sync_invalid /* Current EL Synchronous Handler */
+ ventry el_current_irq_invalid /* Current EL IRQ Handler */
+ ventry el_current_fiq_invalid /* Current EL FIQ Handler */
+ ventry el_current_error_invalid /* Current EL Error Handler */
+
+ ventry el_lower_sync_invalid /* Lower EL Synchronous 64-bit Handler */
+ ventry el_lower_irq_invalid /* Lower EL IRQ 64-bit Handler */
+ ventry el_lower_fiq_invalid /* Lower EL FIQ 64-bit Handler */
+ ventry el_lower_error_invalid /* Lower EL Error 64-bit Handler */
+
+ ventry el_lower_sync_invalid /* Lower EL Synchronous 32-bit Handler */
+ ventry el_lower_irq_invalid /* Lower EL IRQ 32-bit Handler */
+ ventry el_lower_fiq_invalid /* Lower EL FIQ 32-bit Handler */
+ ventry el_lower_error_invalid /* Lower EL Error 32-bit Handler */
+END(vectors)
+
+/*
+ * Enter Exception.
+ * This will save the processor state that is X0~X29/LR/SP/ELR/PSTATE
+ * to the stack frame.
+ */
+.macro exception_entry, el
+ sub sp, sp, #S_FRAME_SIZE - S_LR /* LR,SP,ELR,PSTATE will be saved later */
+ push x28, x29
+ push x26, x27
+ push x24, x25
+ push x22, x23
+ push x20, x21
+ push x18, x19
+ push x16, x17
+ push x14, x15
+ push x12, x13
+ push x10, x11
+ push x8, x9
+ push x6, x7
+ push x4, x5
+ push x2, x3
+ push x0, x1
+ .if \el == 2
+ add x21, sp, #S_FRAME_SIZE
+ .else
+ mrs x21, sp_el1
+ .endif
+ mrs x22, elr_el2
+ mrs x23, spsr_el2
+ stp lr, x21, [sp, #S_LR]
+ stp x22, x23, [sp, #S_PC]
+.endm
+
+/*
+ * Exit Exception.
+ * This will restore the processor state that is X0~X29/LR/SP/ELR/PSTATE
+ * from the stack frame and return from exceprion.
+ */
+.macro exception_exit, el
+ ldp x21, x22, [sp, #S_PC]
+ msr elr_el2, x21 /* restore elr register */
+ msr spsr_el2, x22 /* restore spsr register */
+ .if \el == 1
+ ldr x23, [sp, #S_SP]
+ msr sp_el1, x23 /* restore return stack pointer */
+ .endif
+ pop x0, x1 /* restore the general registers */
+ pop x2, x3
+ pop x4, x5
+ pop x6, x7
+ pop x8, x9
+ pop x10, x11
+ pop x12, x13
+ pop x14, x15
+ pop x16, x17
+ pop x18, x19
+ pop x20, x21
+ pop x22, x23
+ pop x24, x25
+ pop x26, x27
+ pop x28, x29
+ ldr lr, [sp], #S_FRAME_SIZE - S_LR /* restore LR and SP */
+ eret /* exception return */
+.endm
+
+/*
+ * Current EL exception entry
+ */
+ENTRY(el_current_sync_invalid)
+ exception_entry 2
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_sync
+ENDPROC(el_current_sync_invalid)
+
+ENTRY(el_current_irq_invalid)
+ exception_entry 2
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_irq
+ENDPROC(el_current_irq_invalid)
+
+ENTRY(el_current_fiq_invalid)
+ exception_entry 2
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_fiq
+ENDPROC(el_current_fiq_invalid)
+
+ENTRY(el_current_error_invalid)
+ exception_entry 2
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_error
+ENDPROC(el_current_error_invalid)
+
+
+/*
+ * Lower EL exception entry
+ */
+ENTRY(el_lower_sync_invalid)
+ exception_entry 1
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_sync
+ENDPROC(el_lower_sync_invalid)
+
+ENTRY(el_lower_irq_invalid)
+ exception_entry 1
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_irq
+ENDPROC(el_lower_irq_invalid)
+
+ENTRY(el_lower_fiq_invalid)
+ exception_entry 1
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_fiq
+ENDPROC(el_lower_fiq_invalid)
+
+ENTRY(el_lower_error_invalid)
+ exception_entry 1
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_error
+ENDPROC(el_lower_error_invalid)
diff --git a/arch/arm/cpu/armv8/interrupts.c b/arch/arm/cpu/armv8/interrupts.c
new file mode 100644
index 0000000..b4d2368
--- /dev/null
+++ b/arch/arm/cpu/armv8/interrupts.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+
+#ifdef CONFIG_USE_IRQ
+int interrupt_init (void)
+{
+ return 0;
+}
+
+/* enable IRQ interrupts */
+void enable_interrupts (void)
+{
+}
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+ return 0;
+}
+#else
+int interrupt_init (void)
+{
+ return 0;
+}
+
+void enable_interrupts (void)
+{
+ return;
+}
+int disable_interrupts (void)
+{
+ return 0;
+}
+#endif /* CONFIG_USE_IRQ */
+
+
+void show_regs (struct pt_regs *regs)
+{
+ int i;
+
+ printf("PC is at %lx\n", regs->pc);
+ printf("LR is at %lx\n", regs->regs[30]);
+ printf("PSTATE: %08lx\n", regs->pstate);
+ printf("SP : %lx\n", regs->sp);
+ for (i = 29; i >= 0; i--) {
+ printf("x%-2d: %016lx ", i, regs->regs[i]);
+ if (i % 2 == 0)
+ printf("\n");
+ }
+ printf("\n");
+}
+
+/*
+ * do_bad_sync handles the impossible case in the Synchronous Abort vector.
+ */
+void do_bad_sync(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Synchronous Abort\" handler detected, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_irq handles the impossible case in the Irq vector.
+ */
+void do_bad_irq(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Irq\" handler detected, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_fiq handles the impossible case in the Fiq vector.
+ */
+void do_bad_fiq(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Fiq\" handler detected, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_error handles the impossible case in the Error vector.
+ */
+void do_bad_error(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Error\" handler detected, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
diff --git a/arch/arm/cpu/armv8/relocate.S b/arch/arm/cpu/armv8/relocate.S
new file mode 100644
index 0000000..87b5ef0
--- /dev/null
+++ b/arch/arm/cpu/armv8/relocate.S
@@ -0,0 +1,71 @@
+/*
+ * relocate - common relocation function for ARM64 U-Boot
+ *
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+/*
+ * void relocate_code (addr_moni)
+ *
+ * This function relocates the monitor code.
+ *
+ * NOTE:
+ * GOT is used and configuration CONFIG_NEEDS_MANUAL_RELOC is needed.
+ */
+ENTRY(relocate_code)
+ /*
+ * Copy u-boot from flash to RAM
+ */
+ ldr x1, =__image_copy_start /* x1 <- copy source */
+ cmp x1, x0
+ b.eq relocate_done /* skip relocation */
+ mov x2, x0 /* x2 <- copy destination */
+ ldr x3, =__image_copy_end /* x3 <- source end address */
+
+copy_loop:
+ ldp x10, x11, [x1], #16 /* copy from source address [x1] */
+ stp x10, x11, [x2], #16 /* copy to target address [x2] */
+ cmp x1, x3 /* until source end address [x3] */
+ b.lo copy_loop
+
+ /*
+ * Fix .reloc relocations
+ */
+ ldr x9, [x18, #GD_RELOC_OFF]/* x9 <- relocation offset */
+ ldr x1, =__rel_got_start /* x1 <- rel got start ofs */
+ add x1, x1, x9 /* x1 <- rel got start in RAM */
+ ldr x2, =__rel_got_end /* x2 <- rel got end ofs */
+ add x2, x2, x9 /* x2 <- rel got end in RAM */
+fixloop:
+ ldr x10, [x1] /* x10 <- address to be fixed up */
+ add x10, x10, x9 /* x10 <- address to be fixed up in RAM*/
+ str x10, [x1]
+ add x1, x1, #8 /* each gotn entry is 8 bytes */
+ cmp x1, x2
+ b.lo fixloop
+
+relocate_done:
+ ret
+ENDPROC(relocate_code)
diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
new file mode 100644
index 0000000..328669a
--- /dev/null
+++ b/arch/arm/cpu/armv8/start.S
@@ -0,0 +1,200 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <linux/linkage.h>
+#include <asm/arch/mmu.h>
+
+/*************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ *************************************************************************/
+
+.globl _start
+_start:
+ b reset
+
+ .align 3
+
+.globl _TEXT_BASE
+_TEXT_BASE:
+ .quad CONFIG_SYS_TEXT_BASE
+
+/*
+ * These are defined in the linker script.
+ */
+.globl _end_ofs
+_end_ofs:
+ .quad _end - _start
+
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .quad __bss_start - _start
+
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .quad __bss_end - _start
+
+reset:
+ /*
+ * EL3 initialisation
+ */
+ mrs x0, CurrentEL
+ cmp x0, #0xc /* EL3? */
+ b.ne reset_nonsecure /* skip EL3 initialisation */
+
+ mov x0, #0x30 /* RES1 */
+ orr x0, x0, #(1 << 0) /* Non-secure EL1 */
+ orr x0, x0, #(1 << 8) /* HVC enable */
+ orr x0, x0, #(1 << 10) /* 64-bit EL2 */
+ msr scr_el3, x0
+
+ msr cptr_el3, xzr /* Disable copro. traps to EL3 */
+
+ /* Counter frequency initialisation */
+ ldr x0, =CONFIG_SYS_CNTFRQ
+ msr cntfrq_el0, x0
+
+ /* GIC initialisation */
+ mrs x0, mpidr_el1
+ tst x0, #15
+ b.ne 1f /* secondary CPU */
+
+ ldr x1, =GIC_DIST_BASE /* GICD_CTLR */
+ mov w0, #3 /* EnableGrp0 | EnableGrp1 */
+ str w0, [x1]
+
+1: ldr x1, =GIC_DIST_BASE + 0x80 /* GICD_IGROUPR */
+ mov w0, #~0 /* Grp1 interrupts */
+ str w0, [x1], #4
+ b.ne 2f /* Only local interrupts for secondary CPUs */
+ str w0, [x1], #4
+ str w0, [x1], #4
+
+2: ldr x1, =GIC_CPU_BASE /* GICC_CTLR */
+ ldr w0, [x1]
+ mov w0, #3 /* EnableGrp0 | EnableGrp1 */
+ str w0, [x1]
+
+ mov w0, #1 << 7 /* allow NS access to GICC_PMR */
+ str w0, [x1, #4] /* GICC_PMR */
+
+ /* SCTLR_EL2 initialisation */
+ msr sctlr_el2, xzr
+
+ /* Return to the EL2_SP1 mode from EL3 */
+ adr x0, reset_nonsecure
+ mov x1, #0x3c9 /* EL2_SP1 | D | A | I | F */
+ msr elr_el3, x0
+ msr spsr_el3, x1
+ eret
+
+ /*
+ * EL2 initialisation:
+ * MMU Disabled, iCache Disabled, dCache Disabled
+ */
+reset_nonsecure:
+ /* SCTLR_EL2 initialisation */
+ mov x0, #0x2 /* Alignment check enable */
+ msr sctlr_el2, x0
+
+ /* Initialize vBAR */
+ adr x0, vectors
+ msr vbar_el2, x0
+
+ /* Cache/BPB/TLB Invalidate */
+ bl __asm_flush_dcache_all /* dCache invalidate */
+ bl __asm_invalidate_icache_all /* iCache invalidate */
+ bl __asm_invalidate_tlb_all /* invalidate I + D TLBs */
+
+ /* Processor specific initialisation */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ bl lowlevel_init
+#endif
+
+ mrs x0, mpidr_el1
+ tst x0, #15
+ b.eq master_cpu
+
+ /*
+ * Secondary CPUs
+ */
+slave_cpu:
+
+ wfe
+ ldr x1, =SECONDARY_CPU_MAILBOX
+ ldr x0, [x1]
+ cbz x0, slave_cpu
+ br x0 /* branch to the given address */
+
+ /*
+ * Primary CPU
+ */
+master_cpu:
+
+ bl _main
+
+/*------------------------------------------------------------------------------*/
+
+ENTRY(c_runtime_cpu_setup)
+ /* If I-cache is enabled invalidate it */
+#ifndef CONFIG_SYS_ICACHE_OFF
+ ic iallu /* I+BTB cache invalidate */
+ isb sy
+#endif
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+ /*
+ * Memory region attributes:
+ *
+ * n = AttrIndx[2:0]
+ * n MAIR
+ * DEVICE_nGnRnE 000 00000000
+ * DEVICE_nGnRE 001 00000100
+ * DEVICE_GRE 010 00001100
+ * NORMAL_NC 011 01000100
+ * NORMAL 100 11111111
+ */
+ ldr x0, =MAIR(0x00, MT_DEVICE_nGnRnE) | \
+ MAIR(0x04, MT_DEVICE_nGnRE) | \
+ MAIR(0x0c, MT_DEVICE_GRE) | \
+ MAIR(0x44, MT_NORMAL_NC) | \
+ MAIR(0xff, MT_NORMAL)
+ msr mair_el2, x0
+
+ /*
+ * Set/prepare TCR and TTBR. Using 512GB (39-bit) address range.
+ */
+ ldr x0, =TCR_T0SZ(VA_BITS) | TCR_FLAGS | TCR_IPS_40BIT
+ orr x0, x0, TCR_TG0_64K
+ msr tcr_el2, x0
+#endif
+
+ /* Relocate vBAR */
+ adr x0, vectors
+ msr vbar_el2, x0
+
+ ret
+ENDPROC(c_runtime_cpu_setup)
diff --git a/arch/arm/cpu/armv8/timer.c b/arch/arm/cpu/armv8/timer.c
new file mode 100644
index 0000000..8c0cfcb
--- /dev/null
+++ b/arch/arm/cpu/armv8/timer.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <div64.h>
+
+/*
+ * Genertic Timer implementation of __udelay/get_timer/get_ticks/get_tbclk
+ * functions. If any other timers used, another implementation should be
+ * placed in platform code.
+ */
+
+static inline unsigned long tick_to_time(unsigned long tick)
+{
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, CONFIG_SYS_CNTFRQ);
+ return tick;
+}
+
+static inline unsigned long time_to_tick(unsigned long time)
+{
+ time *= CONFIG_SYS_CNTFRQ;
+ do_div(time, CONFIG_SYS_HZ);
+ return time;
+}
+
+/*
+ * Generic timer implementation of get_tbclk()
+ */
+ulong __get_tbclk (void)
+{
+ return CONFIG_SYS_HZ;
+}
+ulong get_tbclk(void)
+ __attribute__((weak, alias("__get_tbclk")));
+
+/*
+ * Generic timer implementation of get_timer()
+ */
+ulong __get_timer(ulong base)
+{
+ u64 cval;
+
+ isb();
+ asm volatile("mrs %0, cntpct_el0" : "=r" (cval));
+
+ tick_to_time(cval);
+
+ return tick_to_time(cval) - base;
+}
+ulong get_timer(ulong base)
+ __attribute__((weak, alias("__get_timer")));
+
+/*
+ * Generic timer implementation of get_ticks()
+ */
+unsigned long long __get_ticks(void)
+{
+ return get_timer(0);
+}
+unsigned long long get_ticks(void)
+ __attribute__((weak, alias("__get_ticks")));
+
+/*
+ * Generic timer implementation of __udelay()
+ */
+void ___udelay(ulong usec)
+{
+ unsigned long tmp;
+
+ tmp = get_ticks() + usec/1000;
+
+ while (get_ticks() < tmp);
+}
+void __udelay(ulong usec)
+ __attribute__((weak, alias("___udelay")));
diff --git a/arch/arm/cpu/armv8/tlb.S b/arch/arm/cpu/armv8/tlb.S
new file mode 100644
index 0000000..f0b7dbc
--- /dev/null
+++ b/arch/arm/cpu/armv8/tlb.S
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <linux/linkage.h>
+
+/*
+ * void __asm_invalidate_tlb_all(void)
+ *
+ * invalidate all tlb entries.
+ */
+ENTRY(__asm_invalidate_tlb_all)
+ tlbi alle2
+ dsb sy
+ isb
+ ret
+ENDPROC(__asm_invalidate_tlb_all)
diff --git a/arch/arm/cpu/armv8/u-boot.lds b/arch/arm/cpu/armv8/u-boot.lds
new file mode 100644
index 0000000..14842e3
--- /dev/null
+++ b/arch/arm/cpu/armv8/u-boot.lds
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2013 FengHua <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(8);
+ .text :
+ {
+ *(.__image_copy_start)
+ CPUDIR/start.o (.text*)
+ *(.text*)
+ }
+
+ . = ALIGN(8);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(8);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(8);
+
+ . = .;
+
+ . = ALIGN(8);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ }
+
+ . = ALIGN(8);
+ .reloc : {
+ __rel_got_start = .;
+ *(.got)
+ __rel_got_end = .;
+ }
+
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ _end = .;
+
+ . = ALIGN(8);
+ .bss : {
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(8);
+ __bss_end = .;
+ }
+
+ /DISCARD/ : { *(.dynsym) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
diff --git a/arch/arm/include/asm/arch-armv8/armv8.h b/arch/arm/include/asm/arch-armv8/armv8.h
new file mode 100644
index 0000000..8506125
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv8/armv8.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARMV8_ARMV8_H
+#define __ASM_ARMV8_ARMV8_H
+
+/*
+ * SCTLR_EL2 bits definitions
+ */
+#define CR_M (1 << 0) /* MMU enable */
+#define CR_A (1 << 1) /* Alignment abort enable */
+#define CR_C (1 << 2) /* Dcache enable */
+#define CR_SA (1 << 3) /* Stack Alignment Check Enable */
+#define CR_I (1 << 12) /* Icache enable */
+#define CR_WXN (1 << 19) /* Write Permision Imply XN */
+#define CR_EE (1 << 25) /* Exception (Big) Endian */
+
+void v8_outer_cache_enable(void);
+void v8_outer_cache_disable(void);
+void v8_outer_cache_flush_all(void);
+void v8_outer_cache_inval_all(void);
+void v8_outer_cache_flush_range(u64 start, u64 end);
+void v8_outer_cache_inval_range(u64 start, u64 end);
+
+#endif /* __ASM_ARMV8_ARMV8_H */
diff --git a/arch/arm/include/asm/arch-armv8/gpio.h b/arch/arm/include/asm/arch-armv8/gpio.h
new file mode 100644
index 0000000..0fbbcaf
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv8/gpio.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_ARMV8_GPIO_H_
+#define _ASM_ARMV8_GPIO_H_
+
+#endif /* _ASM_ARMV8_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-armv8/mmu.h b/arch/arm/include/asm/arch-armv8/mmu.h
new file mode 100644
index 0000000..3647f0a
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv8/mmu.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_ARMV8_MMU_H_
+#define _ASM_ARMV8_MMU_H_
+
+#ifdef __ASSEMBLY__
+#define _AC(X,Y) X
+#define _AT(T,X) X
+#else
+#define __AC(X,Y) (X##Y)
+#define _AC(X,Y) __AC(X,Y)
+#define _AT(T,X) ((T)(X))
+#endif
+
+#define UL(x) _AC(x, UL)
+
+/***************************************************************/
+/*
+ * The following definitions are related each other, shoud be
+ * calculated specifically.
+ */
+#define VA_BITS (39)
+
+/* PAGE_SHIFT determines the page size */
+#undef PAGE_SIZE
+#define PAGE_SHIFT 16
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT 29
+#define SECTION_SIZE (_AC(1, UL) << SECTION_SHIFT)
+#define SECTION_MASK (~(SECTION_SIZE-1))
+/***************************************************************/
+
+/*
+ * Memory types available.
+ */
+#define MT_DEVICE_nGnRnE 0
+#define MT_DEVICE_nGnRE 1
+#define MT_DEVICE_GRE 2
+#define MT_NORMAL_NC 3
+#define MT_NORMAL 4
+
+#define MAIR(attr, mt) ((attr) << ((mt) * 8))
+
+/*
+ * Hardware page table definitions.
+ *
+ * Level 2 descriptor (PMD).
+ */
+#define PMD_TYPE_MASK (3 << 0)
+#define PMD_TYPE_FAULT (0 << 0)
+#define PMD_TYPE_TABLE (3 << 0)
+#define PMD_TYPE_SECT (1 << 0)
+
+/*
+ * Section
+ */
+#define PMD_SECT_S (UL(3) << 8)
+#define PMD_SECT_AF (UL(1) << 10)
+#define PMD_SECT_NG (UL(1) << 11)
+#define PMD_SECT_PXN (UL(1) << 53)
+#define PMD_SECT_UXN (UL(1) << 54)
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PMD_ATTRINDX(t) ((t) << 2)
+#define PMD_ATTRINDX_MASK (7 << 2)
+
+/*
+ * TCR_EL2 flags.
+ */
+#define TCR_T0SZ(x) ((64 - (x)) << 0)
+#define TCR_IRGN_NC (0 << 8)
+#define TCR_IRGN_WBWA (1 << 8)
+#define TCR_IRGN_WT (2 << 8)
+#define TCR_IRGN_WBnWA (3 << 8)
+#define TCR_IRGN_MASK (3 << 8)
+#define TCR_ORGN_NC (0 << 10)
+#define TCR_ORGN_WBWA (1 << 10)
+#define TCR_ORGN_WT (2 << 10)
+#define TCR_ORGN_WBnWA (3 << 10)
+#define TCR_ORGN_MASK (3 << 10)
+#define TCR_SHARED (3 << 12)
+#define TCR_TG0_4K (0 << 14)
+#define TCR_TG0_64K (1 << 14)
+#define TCR_TG0_16K (2 << 14)
+#define TCR_IPS_40BIT (2 << 16)
+
+/* PTWs cacheable, inner/outer WBWA not shareable */
+#define TCR_FLAGS TCR_IRGN_WBWA | TCR_ORGN_WBWA
+
+#endif /* _ASM_ARMV8_MMU_H_ */
diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h
index c3489f1..a02d989 100644
--- a/arch/arm/include/asm/byteorder.h
+++ b/arch/arm/include/asm/byteorder.h
@@ -23,10 +23,22 @@
# define __SWAB_64_THRU_32__
#endif
+#ifndef CONFIG_ARMV8
+
#ifdef __ARMEB__
#include <linux/byteorder/big_endian.h>
#else
#include <linux/byteorder/little_endian.h>
#endif
+#else /* CONFIG_ARMV8 */
+
+#ifdef __AARCH64EB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
+
+#endif /* CONFIG_ARMV8 */
+
#endif
diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 99b703e..30f008e 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -9,4 +9,14 @@
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
+
+#ifdef CONFIG_ARMV8
+/*
+ * Currently, GOT is used to relocate u-boot and
+ * configuration CONFIG_NEEDS_MANUAL_RELOC is needed.
+ */
+#define CONFIG_NEEDS_MANUAL_RELOC
+#define CONFIG_PHYS_64BIT
+#endif
+
#endif
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 79a9597..27b82b9 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -47,6 +47,10 @@ struct arch_global_data {
#include <asm-generic/global_data.h>
-#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8")
+#ifndef CONFIG_ARMV8
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8")
+#else
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("x18")
+#endif
#endif /* __ASM_GBL_DATA_H */
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 1fbc531..dfb85e8 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -75,42 +75,42 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
-extern inline void __raw_writesb(unsigned int addr, const void *data, int bytelen)
+extern inline void __raw_writesb(unsigned long addr, const void *data, int bytelen)
{
uint8_t *buf = (uint8_t *)data;
while(bytelen--)
__arch_putb(*buf++, addr);
}
-extern inline void __raw_writesw(unsigned int addr, const void *data, int wordlen)
+extern inline void __raw_writesw(unsigned long addr, const void *data, int wordlen)
{
uint16_t *buf = (uint16_t *)data;
while(wordlen--)
__arch_putw(*buf++, addr);
}
-extern inline void __raw_writesl(unsigned int addr, const void *data, int longlen)
+extern inline void __raw_writesl(unsigned long addr, const void *data, int longlen)
{
uint32_t *buf = (uint32_t *)data;
while(longlen--)
__arch_putl(*buf++, addr);
}
-extern inline void __raw_readsb(unsigned int addr, void *data, int bytelen)
+extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
{
uint8_t *buf = (uint8_t *)data;
while(bytelen--)
*buf++ = __arch_getb(addr);
}
-extern inline void __raw_readsw(unsigned int addr, void *data, int wordlen)
+extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
{
uint16_t *buf = (uint16_t *)data;
while(wordlen--)
*buf++ = __arch_getw(addr);
}
-extern inline void __raw_readsl(unsigned int addr, void *data, int longlen)
+extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
{
uint32_t *buf = (uint32_t *)data;
while(longlen--)
diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h
index ff13f36..70be196 100644
--- a/arch/arm/include/asm/macro.h
+++ b/arch/arm/include/asm/macro.h
@@ -54,5 +54,31 @@
bcs 1b
.endm
+#ifdef CONFIG_ARMV8
+/*
+ * Register aliases.
+ */
+lr .req x30 // link register
+
+/*
+ * Stack pushing/popping (register pairs only).
+ * Equivalent to store decrement before,
+ * load increment after.
+ */
+.macro push, xreg1, xreg2
+ stp \xreg1, \xreg2, [sp, #-16]!
+.endm
+
+.macro pop, xreg1, xreg2
+ ldp \xreg1, \xreg2, [sp], #16
+.endm
+
+.macro ventry label
+ .align 7
+ b \label
+.endm
+
+#endif /* CONFIG_ARMV8 */
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_ARM_MACRO_H__ */
diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h
index c412486..0da38cb 100644
--- a/arch/arm/include/asm/posix_types.h
+++ b/arch/arm/include/asm/posix_types.h
@@ -19,6 +19,8 @@
* assume GCC is being used.
*/
+#ifndef CONFIG_ARMV8
+
typedef unsigned short __kernel_dev_t;
typedef unsigned long __kernel_ino_t;
typedef unsigned short __kernel_mode_t;
@@ -44,6 +46,35 @@ typedef unsigned int __kernel_gid32_t;
typedef unsigned short __kernel_old_uid_t;
typedef unsigned short __kernel_old_gid_t;
+#else /* CONFIG_ARMV8 */
+
+typedef unsigned short __kernel_dev_t;
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef long __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+
+#endif /* CONFIG_ARMV8 */
+
#ifdef __GNUC__
typedef long long __kernel_loff_t;
#endif
diff --git a/arch/arm/include/asm/proc-armv/ptrace.h b/arch/arm/include/asm/proc-armv/ptrace.h
index 79cc644..69822a2 100644
--- a/arch/arm/include/asm/proc-armv/ptrace.h
+++ b/arch/arm/include/asm/proc-armv/ptrace.h
@@ -12,6 +12,8 @@
#include <linux/config.h>
+#ifndef CONFIG_ARMV8
+
#define USR26_MODE 0x00
#define FIQ26_MODE 0x01
#define IRQ26_MODE 0x02
@@ -106,4 +108,40 @@ static inline int valid_user_regs(struct pt_regs *regs)
#endif /* __ASSEMBLY__ */
+#else /* CONFIG_ARMV8 */
+
+#define PCMASK 0
+
+#define S_X0 (0) /* offsetof(struct pt_regs, regs[0]) */
+#define S_X1 (8) /* offsetof(struct pt_regs, regs[1]) */
+#define S_X2 (16) /* offsetof(struct pt_regs, regs[2]) */
+#define S_X3 (24 /* offsetof(struct pt_regs, regs[3]) */
+#define S_X4 (32) /* offsetof(struct pt_regs, regs[4]) */
+#define S_X5 (40) /* offsetof(struct pt_regs, regs[5]) */
+#define S_X6 (48) /* offsetof(struct pt_regs, regs[6]) */
+#define S_X7 (56) /* offsetof(struct pt_regs, regs[7]) */
+#define S_LR (240) /* offsetof(struct pt_regs, regs[30]) */
+#define S_SP (248) /* offsetof(struct pt_regs, sp) */
+#define S_PC (256) /* offsetof(struct pt_regs, pc) */
+#define S_PSTATE (264) /* offsetof(struct pt_regs, pstate) */
+#define S_FRAME_SIZE (272) /* sizeof(struct pt_regs) */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored on the stack during an
+ * exception. Note that sizeof(struct pt_regs) has to be a multiple of 16 (for
+ * stack alignment). struct user_pt_regs must form a prefix of struct pt_regs.
+ */
+struct pt_regs {
+ u64 regs[31];
+ u64 sp;
+ u64 pc;
+ u64 pstate;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_ARMV8 */
+
#endif
diff --git a/arch/arm/include/asm/proc-armv/system.h b/arch/arm/include/asm/proc-armv/system.h
index b4cfa68..fd98b7b 100644
--- a/arch/arm/include/asm/proc-armv/system.h
+++ b/arch/arm/include/asm/proc-armv/system.h
@@ -15,6 +15,8 @@
/*
* Save the current interrupt enable state & disable IRQs
*/
+#ifndef CONFIG_ARMV8
+
#define local_irq_save(x) \
({ \
unsigned long temp; \
@@ -109,7 +111,61 @@
: "r" (x) \
: "memory")
-#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
+#else /* CONFIG_ARMV8 */
+
+/*
+ * Save the current interrupt enable state
+ * and disable IRQs/FIQs
+ */
+#define local_irq_save(flags) \
+ ({ \
+ asm volatile( \
+ "mrs %0, daif" \
+ "msr daifset, #3" \
+ : "=r" (flags) \
+ : \
+ : "memory"); \
+ })
+
+/*
+ * restore saved IRQ & FIQ state
+ */
+#define local_irq_restore(flags) \
+ ({ \
+ asm volatile( \
+ "msr daif, %0" \
+ : \
+ : "r" (flags) \
+ : "memory"); \
+ })
+
+/*
+ * Enable IRQs/FIQs
+ */
+#define local_irq_enable() \
+ ({ \
+ asm volatile( \
+ "msr daifclr, #3" \
+ : \
+ : \
+ : "memory"); \
+ })
+
+/*
+ * Disable IRQs/FIQs
+ */
+#define local_irq_disable() \
+ ({ \
+ asm volatile( \
+ "msr daifset, #3" \
+ : \
+ : \
+ : "memory"); \
+ })
+
+#endif /* CONFIG_ARMV8 */
+
+#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) || defined(CONFIG_ARMV8)
/*
* On the StrongARM, "swp" is terminally broken since it bypasses the
* cache totally. This means that the cache becomes inconsistent, and,
diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
index 71dc049..128dd3e 100644
--- a/arch/arm/include/asm/types.h
+++ b/arch/arm/include/asm/types.h
@@ -18,8 +18,13 @@ typedef __signed__ int __s32;
typedef unsigned int __u32;
#if defined(__GNUC__)
+#ifndef CONFIG_ARMV8
__extension__ typedef __signed__ long long __s64;
__extension__ typedef unsigned long long __u64;
+#else /* CONFIG_ARMV8 */
+__extension__ typedef __signed__ long __s64;
+__extension__ typedef unsigned long __u64;
+#endif /* CONFIG_ARMV8 */
#endif
/*
@@ -36,10 +41,19 @@ typedef unsigned short u16;
typedef signed int s32;
typedef unsigned int u32;
+#ifndef CONFIG_ARMV8
typedef signed long long s64;
typedef unsigned long long u64;
+#else /* CONFIG_ARMV8 */
+typedef signed long s64;
+typedef unsigned long u64;
+#endif /* CONFIG_ARMV8 */
+#ifndef CONFIG_ARMV8
#define BITS_PER_LONG 32
+#else /* CONFIG_ARMV8 */
+#define BITS_PER_LONG 64
+#endif /* CONFIG_ARMV8 */
/* Dma addresses are 32-bits wide. */
diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h
index 2b5fce8..3ef5538 100644
--- a/arch/arm/include/asm/u-boot.h
+++ b/arch/arm/include/asm/u-boot.h
@@ -44,6 +44,10 @@ typedef struct bd_info {
#endif /* !CONFIG_SYS_GENERIC_BOARD */
/* For image.h:image_check_target_arch() */
+#ifndef CONFIG_ARMV8
#define IH_ARCH_DEFAULT IH_ARCH_ARM
+#else
+#define IH_ARCH_DEFAULT IH_ARCH_ARM64
+#endif
#endif /* _U_BOOT_H_ */
diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h
index 44593a8..a051e97 100644
--- a/arch/arm/include/asm/unaligned.h
+++ b/arch/arm/include/asm/unaligned.h
@@ -8,6 +8,8 @@
/*
* Select endianness
*/
+#ifndef CONFIG_ARMV8
+
#ifndef __ARMEB__
#define get_unaligned __get_unaligned_le
#define put_unaligned __put_unaligned_le
@@ -16,4 +18,16 @@
#define put_unaligned __put_unaligned_be
#endif
+#else /* CONFIG_ARMV8 */
+
+#ifndef __AARCH64EB__
+#define get_unaligned __get_unaligned_le
+#define put_unaligned __put_unaligned_le
+#else
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+#endif
+
+#endif /* CONFIG_ARMV8 */
+
#endif /* _ASM_ARM_UNALIGNED_H */
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 4e78723..86b19e2 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -10,6 +10,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(ARCH).o
LIBGCC = $(obj)libgcc.o
+ifndef CONFIG_ARMV8
GLSOBJS += _ashldi3.o
GLSOBJS += _ashrdi3.o
GLSOBJS += _divsi3.o
@@ -21,9 +22,12 @@ GLSOBJS += _umodsi3.o
GLCOBJS += div0.o
SOBJS-y += crt0.o
+endif
ifndef CONFIG_SPL_BUILD
+ifndef CONFIG_ARMV8
SOBJS-y += relocate.o
+endif
ifndef CONFIG_SYS_GENERIC_BOARD
COBJS-y += board.o
endif
@@ -38,11 +42,15 @@ else
COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
endif
+ifndef CONFIG_ARMV8
COBJS-y += interrupts.o
+endif
COBJS-y += reset.o
COBJS-y += cache.o
+ifndef CONFIG_ARMV8
COBJS-y += cache-cp15.o
+endif
SRCS := $(GLSOBJS:.o=.S) $(GLCOBJS:.o=.c) \
$(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 34f50b0..2a92d69 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -344,7 +344,11 @@ void board_init_f(ulong bootflag)
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
/* reserve TLB table */
+#ifndef CONFIG_ARMV8
gd->arch.tlb_size = 4096 * 4;
+#else
+ gd->arch.tlb_size = 0x10000;
+#endif
addr -= gd->arch.tlb_size;
/* round down to next 64 kB limit */
@@ -419,6 +423,7 @@ void board_init_f(ulong bootflag)
}
#endif
+#ifndef CONFIG_ARMV8
/* setup stackpointer for exeptions */
gd->irq_sp = addr_sp;
#ifdef CONFIG_USE_IRQ
@@ -431,6 +436,10 @@ void board_init_f(ulong bootflag)
/* 8-byte alignment for ABI compliance */
addr_sp &= ~0x07;
+#else /* CONFIG_ARMV8 */
+ /* 16-byte alignment for ABI compliance */
+ addr_sp &= ~0x0f;
+#endif /* CONFIG_ARMV8 */
#else
addr_sp += 128; /* leave 32 words for abort-stack */
gd->irq_sp = addr_sp;
@@ -523,6 +532,15 @@ void board_init_r(gd_t *id, ulong dest_addr)
debug("monitor flash len: %08lX\n", monitor_flash_len);
board_init(); /* Setup chipselects */
+
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ /*
+ * We have to relocate the command table manually
+ */
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
+
/*
* TODO: printing of the clock inforamtion of the board is now
* implemented as part of bdinfo command. Currently only support for
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index eefb456..d9a86b9 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -222,6 +222,7 @@ static void boot_prep_linux(bootm_headers_t *images)
/* Subcommand: GO */
static void boot_jump_linux(bootm_headers_t *images, int flag)
{
+#ifndef CONFIG_ARMV8
unsigned long machid = gd->bd->bi_arch_number;
char *s;
void (*kernel_entry)(int zero, int arch, uint params);
@@ -248,6 +249,21 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)
if (!fake)
kernel_entry(0, machid, r2);
+#else
+ void (*kernel_entry)(void *fdt_addr);
+ int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
+
+ kernel_entry = (void (*)(void *fdt_addr))images->ep;
+
+ debug("## Transferring control to Linux (at address %lx)" \
+ "...\n", (ulong)kernel_entry);
+ bootstage_mark(BOOTSTAGE_ID_RUN_OS);
+
+ announce_and_cleanup(fake);
+
+ if (!fake)
+ kernel_entry(images->ft_addr);
+#endif
}
/* Main Entry point for arm bootm implementation
diff --git a/common/image.c b/common/image.c
index 56a5a62..7182549 100644
--- a/common/image.c
+++ b/common/image.c
@@ -81,6 +81,7 @@ static const table_entry_t uimage_arch[] = {
{ IH_ARCH_NDS32, "nds32", "NDS32", },
{ IH_ARCH_OPENRISC, "or1k", "OpenRISC 1000",},
{ IH_ARCH_SANDBOX, "sandbox", "Sandbox", },
+ { IH_ARCH_ARM64, "arm64", "AArch64", },
{ -1, "", "", },
};
diff --git a/doc/README.armv8 b/doc/README.armv8
new file mode 100644
index 0000000..737c875
--- /dev/null
+++ b/doc/README.armv8
@@ -0,0 +1,14 @@
+Notes:
+
+1. Currenly, u-boot running at EL2.
+
+2. GOT is used to relocate u-boot and CONFIG_NEEDS_MANUAL_RELOC is needed.
+
+3. Fdt should be placed in the first 512 megabytes from the start of the kernel image.
+ So, fdt_high should be defined specially. Please reference linux/Documentation/arm64/booting.txt.
+
+4. Generic board is supported.
+
+TODO:
+
+1. So much print info are formated with %08lx, maybe it should be modified to %016lx.
diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c
index 8fb1765..10676f1 100644
--- a/examples/standalone/stubs.c
+++ b/examples/standalone/stubs.c
@@ -39,6 +39,7 @@ gd_t *global_data;
" bctr\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r11");
#elif defined(CONFIG_ARM)
+#ifndef CONFIG_ARMV8
/*
* r8 holds the pointer to the global_data, ip is a call-clobbered
* register
@@ -50,6 +51,20 @@ gd_t *global_data;
" ldr ip, [r8, %0]\n" \
" ldr pc, [ip, %1]\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "ip");
+#else
+/*
+ * x18 holds the pointer to the global_data, x9 is a call-clobbered
+ * register
+ */
+#define EXPORT_FUNC(x) \
+ asm volatile ( \
+" .globl " #x "\n" \
+#x ":\n" \
+" ldr x9, [x18, %0]\n" \
+" ldr x9, [x9, %1]\n" \
+" br x9\n" \
+ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "x19");
+#endif
#elif defined(CONFIG_MIPS)
/*
* k0 ($26) holds the pointer to the global_data; t9 ($25) is a call-
diff --git a/include/image.h b/include/image.h
index f93a393..12262d7 100644
--- a/include/image.h
+++ b/include/image.h
@@ -156,6 +156,7 @@ struct lmb;
#define IH_ARCH_SANDBOX 19 /* Sandbox architecture (test only) */
#define IH_ARCH_NDS32 20 /* ANDES Technology - NDS32 */
#define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */
+#define IH_ARCH_ARM64 22 /* ARM64 */
/*
* Image Types
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 1/4] core support of arm64
2013-08-24 1:06 [U-Boot] [PATCH v5 0/4] arm64 patch fenghua at phytium.com.cn
2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-24 1:06 ` [U-Boot] [PATCH v5 1/4] core support of arm64 fenghua at phytium.com.cn
@ 2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-24 1:06 ` [U-Boot] [PATCH v5 2/4] board " fenghua at phytium.com.cn
` (7 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: fenghua at phytium.com.cn @ 2013-08-24 1:06 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
Changeds for v4:
- Replace __ARMEB__ with __AARCH64EB__ in byteorder.h and unaligned.h,
gcc for aarch64 use __AARCH64EB__ and __AARCH64EL__ to identify endian.
- Some modification to README.armv8
arch/arm/config.mk | 4 +
arch/arm/cpu/armv8/Makefile | 56 ++++++
arch/arm/cpu/armv8/cache.S | 145 +++++++++++++++
arch/arm/cpu/armv8/cache_v8.c | 291 +++++++++++++++++++++++++++++++
arch/arm/cpu/armv8/config.mk | 31 ++++
arch/arm/cpu/armv8/cpu.c | 68 ++++++++
arch/arm/cpu/armv8/crt0.S | 130 ++++++++++++++
arch/arm/cpu/armv8/exceptions.S | 182 +++++++++++++++++++
arch/arm/cpu/armv8/interrupts.c | 116 ++++++++++++
arch/arm/cpu/armv8/relocate.S | 71 ++++++++
arch/arm/cpu/armv8/start.S | 200 +++++++++++++++++++++
arch/arm/cpu/armv8/timer.c | 95 ++++++++++
arch/arm/cpu/armv8/tlb.S | 38 ++++
arch/arm/cpu/armv8/u-boot.lds | 83 +++++++++
arch/arm/include/asm/arch-armv8/armv8.h | 44 +++++
arch/arm/include/asm/arch-armv8/gpio.h | 26 +++
arch/arm/include/asm/arch-armv8/mmu.h | 117 +++++++++++++
arch/arm/include/asm/byteorder.h | 12 ++
arch/arm/include/asm/config.h | 10 ++
arch/arm/include/asm/global_data.h | 6 +-
arch/arm/include/asm/io.h | 12 +-
arch/arm/include/asm/macro.h | 26 +++
arch/arm/include/asm/posix_types.h | 31 ++++
arch/arm/include/asm/proc-armv/ptrace.h | 38 ++++
arch/arm/include/asm/proc-armv/system.h | 58 +++++-
arch/arm/include/asm/types.h | 14 ++
arch/arm/include/asm/u-boot.h | 4 +
arch/arm/include/asm/unaligned.h | 14 ++
arch/arm/lib/Makefile | 8 +
arch/arm/lib/board.c | 18 ++
arch/arm/lib/bootm.c | 16 ++
common/image.c | 1 +
doc/README.armv8 | 14 ++
examples/standalone/stubs.c | 15 ++
include/image.h | 1 +
35 files changed, 1987 insertions(+), 8 deletions(-)
create mode 100644 arch/arm/cpu/armv8/Makefile
create mode 100644 arch/arm/cpu/armv8/cache.S
create mode 100644 arch/arm/cpu/armv8/cache_v8.c
create mode 100644 arch/arm/cpu/armv8/config.mk
create mode 100644 arch/arm/cpu/armv8/cpu.c
create mode 100644 arch/arm/cpu/armv8/crt0.S
create mode 100644 arch/arm/cpu/armv8/exceptions.S
create mode 100644 arch/arm/cpu/armv8/interrupts.c
create mode 100644 arch/arm/cpu/armv8/relocate.S
create mode 100644 arch/arm/cpu/armv8/start.S
create mode 100644 arch/arm/cpu/armv8/timer.c
create mode 100644 arch/arm/cpu/armv8/tlb.S
create mode 100644 arch/arm/cpu/armv8/u-boot.lds
create mode 100644 arch/arm/include/asm/arch-armv8/armv8.h
create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
create mode 100644 doc/README.armv8
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index ce3903b..f1c6a7b 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -74,7 +74,9 @@ endif
endif
# needed for relocation
+ifndef CONFIG_ARMV8
LDFLAGS_u-boot += -pie
+endif
#
# FIXME: binutils versions < 2.22 have a bug in the assembler where
@@ -95,6 +97,8 @@ endif
endif
# check that only R_ARM_RELATIVE relocations are generated
+ifndef CONFIG_ARMV8
ifneq ($(CONFIG_SPL_BUILD),y)
ALL-y += checkarmreloc
endif
+endif
diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile
new file mode 100644
index 0000000..55fd365
--- /dev/null
+++ b/arch/arm/cpu/armv8/Makefile
@@ -0,0 +1,56 @@
+#
+# Copyright (c) 2013 FengHua <fenghua@phytium.com.cn>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundatio; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).o
+
+START := start.o
+
+COBJS += cpu.o
+COBJS += timer.o
+COBJS += cache_v8.o
+COBJS += interrupts.o
+
+SOBJS += crt0.o
+SOBJS += relocate.o
+SOBJS += exceptions.o
+SOBJS += cache.o
+SOBJS += tlb.o
+
+SRCS := $(START:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S
new file mode 100644
index 0000000..b1a95ec
--- /dev/null
+++ b/arch/arm/cpu/armv8/cache.S
@@ -0,0 +1,145 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * void __asm_flush_dcache_level(level)
+ *
+ * clean and invalidate one level cache.
+ *
+ * x0: cache level
+ * x1~x9: clobbered
+ */
+ENTRY(__asm_flush_dcache_level)
+ lsl x1, x0, #1
+ msr csselr_el1, x1 /* select cache level */
+ isb /* isb to sych the new cssr&csidr */
+ mrs x6, ccsidr_el1 /* read the new ccsidr */
+ and x2, x6, #7 /* x2 = length of the cache lines */
+ add x2, x2, #4 /* add 4 (line length offset) */
+ mov x3, #0x3ff
+ and x3, x3, x6, lsr #3 /* x3 = maximum number of the way size */
+ clz w5, w3 /* bit position of way size */
+ mov x4, #0x7fff
+ and x4, x4, x1, lsr #13 /* x4 = max number of the set size */
+ /* x1 = cache level << 1 */
+ /* x2 = line length offset */
+ /* x3 = number of cache ways */
+ /* x4 = number of cache sets */
+ /* x5 = bit position of way size */
+
+loop_set:
+ mov x6, x3 /* create working copy of way size */
+loop_way:
+ lsl x7, x6, x5
+ orr x9, x0, x7 /* map way and level to cisw value */
+ lsl x7, x4, x2
+ orr x9, x9, x7 /* map set number to cisw value */
+ dc cisw, x9 /* clean & invalidate by set/way */
+ subs x6, x6, #1 /* decrement the way */
+ b.ge loop_way
+ subs x4, x4, #1 /* decrement the set */
+ b.ge loop_set
+
+ ret
+ENDPROC(__asm_flush_dcache_level)
+
+/*
+ * void __asm_flush_dcache_all(void)
+ *
+ * clean and invalidate all data cache by SET/WAY.
+ */
+ENTRY(__asm_flush_dcache_all)
+ dsb sy
+ mov x15, lr
+ mrs x10, clidr_el1 /* read clidr */
+ lsr x11, x10, #24
+ and x11, x11, #0x7 /* x11 = loc */
+ cbz x11, finished /* if loc = 0, no need to clean */
+ mov x0, #0 /* start flush at cache level 0 */
+ /* x0 = level */
+ /* x10 = clidr_el1 */
+ /* x11 = loc */
+
+loop_level:
+ lsl x1, x0, #1
+ add x1, x1, x0 /* x0 = 3x cache level */
+ lsr x1, x10, x1
+ and x1, x1, #7 /* x1 = cache type */
+ cmp x1, #2
+ b.lt skip /* skip if no cache or icache */
+ bl __asm_flush_dcache_level /* flush dcache of level */
+skip:
+ add x0, x0, #1 /* increment cache level */
+ cmp x11, x0
+ b.gt loop_level
+
+finished:
+ mov x0, #0
+ msr csselr_el1, x0 /* swith back to cache level 0 */
+ dsb sy
+ isb
+ mov lr, x15
+ ret
+ENDPROC(__asm_flush_dcache_all)
+
+/*
+ * void __asm_flush_dcache_range(start, end)
+ *
+ * clean & invalidate data cache in the range
+ *
+ * x0: start address
+ * x1: end address
+ */
+ENTRY(__asm_flush_dcache_range)
+ mrs x3, ctr_el0 /* read CTR */
+ lsr x3, x3, #16
+ and x3, x3, #0xf /* cache line size encoding */
+ mov x2, #4 /* bytes per word */
+ lsl x2, x2, x3 /* actual cache line size */
+
+ /* x2 = minimal cache line size in cache system */
+ sub x3, x2, #1
+ bic x0, x0, x3
+1: dc civac, x0 /* clean & invalidate D line / unified line */
+ add x0, x0, x2
+ cmp x0, x1
+ b.lo 1b
+ dsb sy
+ ret
+ENDPROC(__asm_flush_dcache_range)
+
+/*
+ * void __asm_invalidate_icache_all(void)
+ *
+ * invalidate all tlb entries.
+ */
+ENTRY(__asm_invalidate_icache_all)
+ ic ialluis
+ isb sy
+ ret
+ENDPROC(__asm_invalidate_icache_all)
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
new file mode 100644
index 0000000..be2b49f
--- /dev/null
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -0,0 +1,291 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/armv8.h>
+#include <asm/arch/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void __asm_flush_dcache_all(void);
+extern void __asm_flush_dcache_range(u64 start, u64 end);
+extern void __asm_invalidate_tlb_all(void);
+extern void __asm_invalidate_icache_all(void);
+
+static inline unsigned int get_sctlr(void)
+{
+ unsigned int val;
+ asm volatile("mrs %0, sctlr_el2" : "=r" (val) : : "cc");
+ return val;
+}
+
+static inline void set_sctlr(unsigned int val)
+{
+ asm volatile("msr sctlr_el2, %0" : : "r" (val) : "cc");
+ asm volatile("isb");
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+
+static void set_pgtable_section(u64 section, u64 memory_type)
+{
+ u64 *page_table = (u64 *)gd->arch.tlb_addr;
+ u64 value;
+
+ value = (section << SECTION_SHIFT) | PMD_TYPE_SECT | PMD_SECT_AF;
+ value |= PMD_ATTRINDX(memory_type);
+ page_table[section] = value;
+}
+
+/* to activate the MMU we need to set up virtual memory */
+static inline void mmu_setup(void)
+{
+ int i, j;
+ bd_t *bd = gd->bd;
+ static int table_initialized = 0;
+
+ if (!table_initialized) {
+ /* Setup an identity-mapping for all spaces */
+ for (i = 0; i < (PAGE_SIZE >> 3); i++)
+ set_pgtable_section(i, MT_DEVICE_nGnRnE);
+
+ /* Setup an identity-mapping for all RAM space */
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ debug("%s: bank: %d\n", __func__, i);
+ for (j = bd->bi_dram[i].start >> SECTION_SHIFT;
+ j < (bd->bi_dram[i].start + bd->bi_dram[i].size) >> SECTION_SHIFT;
+ j++) {
+ set_pgtable_section(i, MT_NORMAL);
+ }
+ }
+
+ /* load TTBR0 */
+ asm volatile("msr ttbr0_el2, %0" : : "r" (gd->arch.tlb_addr) : "memory");
+
+ table_initialized = 1;
+ }
+
+ /* and enable the mmu */
+ set_sctlr(get_sctlr() | CR_M);
+}
+
+/*
+ * Performs a invalidation of the entire data cache
+ * at all levels
+ */
+void invalidate_dcache_all(void)
+{
+ __asm_flush_dcache_all();
+ v8_outer_cache_inval_all();
+}
+
+/*
+ * Performs a clean & invalidation of the entire data cache
+ * at all levels
+ */
+void flush_dcache_all(void)
+{
+ __asm_flush_dcache_all();
+ v8_outer_cache_flush_all();
+}
+
+/*
+ * Invalidates range in all levels of D-cache/unified cache used:
+ * Affects the range [start, stop - 1]
+ */
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+ __asm_flush_dcache_range(start, stop);
+ v8_outer_cache_inval_range(start, stop);
+}
+
+/*
+ * Flush range(clean & invalidate) from all levels of D-cache/unified
+ * cache used:
+ * Affects the range [start, stop - 1]
+ */
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+ __asm_flush_dcache_range(start, stop);
+ v8_outer_cache_flush_range(start, stop);
+}
+
+void dcache_enable(void)
+{
+ uint32_t sctlr;
+
+ sctlr = get_sctlr();
+
+ /* The data cache is not active unless the mmu is enabled too */
+ if (!(sctlr & CR_M)) {
+ v8_outer_cache_enable();
+ invalidate_dcache_all();
+ __asm_invalidate_tlb_all();
+
+ mmu_setup();
+ }
+
+ set_sctlr(sctlr | CR_C);
+}
+
+void dcache_disable(void)
+{
+ uint32_t sctlr;
+
+ sctlr = get_sctlr();
+
+ /* if cache isn't enabled no need to disable */
+ if (!(sctlr & CR_C))
+ return;
+
+ set_sctlr(sctlr & ~(CR_C|CR_M));
+
+ flush_dcache_all();
+ __asm_invalidate_tlb_all();
+}
+
+int dcache_status(void)
+{
+ return (get_sctlr() & CR_C) != 0;
+}
+
+#else /* CONFIG_SYS_DCACHE_OFF */
+
+void invalidate_dcache_all(void)
+{
+}
+
+void flush_dcache_all(void)
+{
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void dcache_enable(void)
+{
+}
+
+void dcache_disable(void)
+{
+}
+
+int dcache_status(void)
+{
+ return 0;
+}
+
+#endif /* CONFIG_SYS_DCACHE_OFF */
+
+#ifndef CONFIG_SYS_ICACHE_OFF
+
+void icache_enable(void)
+{
+ set_sctlr(get_sctlr() | CR_I);
+}
+
+void icache_disable(void)
+{
+ set_sctlr(get_sctlr() & ~CR_I);
+}
+
+int icache_status(void)
+{
+ return (get_sctlr() & CR_I) != 0;
+}
+
+void invalidate_icache_all(void)
+{
+ __asm_invalidate_icache_all();
+}
+
+#else /* CONFIG_SYS_ICACHE_OFF */
+
+void icache_enable(void)
+{
+}
+
+void icache_disable(void)
+{
+}
+
+int icache_status(void)
+{
+ return 0;
+}
+
+void invalidate_icache_all(void)
+{
+}
+
+#endif /* CONFIG_SYS_ICACHE_OFF */
+
+/*
+ * Enable dCache & iCache, whether cache is actually enabled
+ * depend on CONFIG_SYS_DCACHE_OFF and CONFIG_SYS_ICACHE_OFF
+ */
+void enable_caches(void)
+{
+ icache_enable();
+ dcache_enable();
+}
+
+/*
+ * Flush range from all levels of d-cache/unified-cache used:
+ * Affects the range [start, start + size - 1]
+ */
+void flush_cache(unsigned long start, unsigned long size)
+{
+ flush_dcache_range(start, start + size);
+}
+
+/*
+ * Stub implementations for outer cache operations
+ */
+void __v8_outer_cache_enable(void) {}
+void v8_outer_cache_enable(void)
+ __attribute__((weak, alias("__v8_outer_cache_enable")));
+
+void __v8_outer_cache_disable(void) {}
+void v8_outer_cache_disable(void)
+ __attribute__((weak, alias("__v8_outer_cache_disable")));
+
+void __v8_outer_cache_flush_all(void) {}
+void v8_outer_cache_flush_all(void)
+ __attribute__((weak, alias("__v8_outer_cache_flush_all")));
+
+void __v8_outer_cache_inval_all(void) {}
+void v8_outer_cache_inval_all(void)
+ __attribute__((weak, alias("__v8_outer_cache_inval_all")));
+
+void __v8_outer_cache_flush_range(u64 start, u64 end) {}
+void v8_outer_cache_flush_range(u64 start, u64 end)
+ __attribute__((weak, alias("__v8_outer_cache_flush_range")));
+
+void __v8_outer_cache_inval_range(u64 start, u64 end) {}
+void v8_outer_cache_inval_range(u64 start, u64 end)
+ __attribute__((weak, alias("__v8_outer_cache_inval_range")));
diff --git a/arch/arm/cpu/armv8/config.mk b/arch/arm/cpu/armv8/config.mk
new file mode 100644
index 0000000..aae2170
--- /dev/null
+++ b/arch/arm/cpu/armv8/config.mk
@@ -0,0 +1,31 @@
+#
+# Copyright (c) 2013 FengHua <fenghua@phytium.com.cn>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+PLATFORM_RELFLAGS += -fno-common -ffixed-x18
+
+# SEE README.arm-unaligned-accesses
+PF_NO_UNALIGNED := $(call cc-option, -mstrict-align)
+PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
+
+PF_CPPFLAGS_ARMV8 := $(call cc-option, -march=armv8-a)
+PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV8)
+PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
+PLATFORM_CPPFLAGS += -fpic
diff --git a/arch/arm/cpu/armv8/cpu.c b/arch/arm/cpu/armv8/cpu.c
new file mode 100644
index 0000000..5db7505
--- /dev/null
+++ b/arch/arm/cpu/armv8/cpu.c
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2008 Texas Insturments
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/arch/armv8.h>
+#include <linux/compiler.h>
+
+void __weak cpu_cache_initialization(void){}
+
+int cleanup_before_linux(void)
+{
+ /*
+ * this function is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we turn off caches etc ...
+ */
+#ifndef CONFIG_SPL_BUILD
+ disable_interrupts();
+#endif
+
+ /*
+ * Turn off I-cache and invalidate it
+ */
+ icache_disable();
+ invalidate_icache_all();
+
+ /*
+ * turn off D-cache
+ * dcache_disable() in turn flushes the d-cache and disables MMU
+ */
+ dcache_disable();
+ v8_outer_cache_disable();
+
+ /*
+ * After D-cache is flushed and before it is disabled there may
+ * be some new valid entries brought into the cache. We are sure
+ * that these lines are not dirty and will not affect our execution.
+ * (because unwinding the call-stack and setting a bit in CP15 SCTRL
+ * is all we did during this. We have not pushed anything on to the
+ * stack. Neither have we affected any static data)
+ * So just invalidate the entire d-cache again to avoid coherency
+ * problems for kernel
+ */
+ invalidate_dcache_all();
+
+ /*
+ * Some CPU need more cache attention before starting the kernel.
+ */
+ cpu_cache_initialization();
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv8/crt0.S b/arch/arm/cpu/armv8/crt0.S
new file mode 100644
index 0000000..fe39495
--- /dev/null
+++ b/arch/arm/cpu/armv8/crt0.S
@@ -0,0 +1,130 @@
+/*
+ * crt0 - C-runtime startup Code for ARM64 U-Boot
+ *
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * Bsed on arm/lib/crt0.S by Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm-offsets.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * This file handles the target-independent stages of the U-Boot
+ * start-up where a C runtime environment is needed. Its entry point
+ * is _main and is branched into from the target's start.S file.
+ *
+ * _main execution sequence is:
+ *
+ * 1. Set up initial environment for calling board_init_f().
+ * This environment only provides a stack and a place to store
+ * the GD ('global data') structure, both located in some readily
+ * available RAM (SRAM, locked cache...). In this context, VARIABLE
+ * global data, initialized or not (BSS), are UNAVAILABLE; only
+ * CONSTANT initialized data are available.
+ *
+ * 2. Call board_init_f(). This function prepares the hardware for
+ * execution from system RAM (DRAM, DDR...) As system RAM may not
+ * be available yet, , board_init_f() must use the current GD to
+ * store any data which must be passed on to later stages. These
+ * data include the relocation destination, the future stack, and
+ * the future GD location.
+ *
+ * (the following applies only to non-SPL builds)
+ *
+ * 3. Set up intermediate environment where the stack and GD are the
+ * ones allocated by board_init_f() in system RAM, but BSS and
+ * initialized non-const data are still not available.
+ *
+ * 4. Call relocate_code(). This function relocates U-Boot from its
+ * current location into the relocation destination computed by
+ * board_init_f().
+ *
+ * 5. Set up final environment for calling board_init_r(). This
+ * environment has BSS (initialized to 0), initialized non-const
+ * data (initialized to their intended value), and stack in system
+ * RAM. GD has retained values set by board_init_f(). Some CPUs
+ * have some work left to do at this point regarding memory, so
+ * call c_runtime_cpu_setup.
+ *
+ * 6. Branch to board_init_r().
+ */
+
+ENTRY(_main)
+
+/*
+ * Set up initial C runtime environment and call board_init_f(0).
+ */
+ ldr x0, =(CONFIG_SYS_INIT_SP_ADDR)
+ sub x0, x0, #GD_SIZE /* allocate one GD above SP */
+ bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */
+ mov x18, sp /* GD is above SP */
+ mov x0, #0
+ bl board_init_f
+
+/*
+ * Set up intermediate environment (new sp and gd) and call
+ * relocate_code(addr_moni). Trick here is that we'll return
+ * 'here' but relocated.
+ */
+ ldr x0, [x18, #GD_START_ADDR_SP] /* x0 = gd->start_addr_sp */
+ bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */
+ ldr x18, [x18, #GD_BD] /* x18 = gd->bd */
+ sub x18, x18, #GD_SIZE /* new GD is below bd */
+
+ adr lr, relocation_return
+ ldr x9, [x18, #GD_RELOC_OFF] /* x0 = gd->reloc_off */
+ add lr, lr, x9 /* new return address after relocation */
+ ldr x0, [x18, #GD_RELOCADDR] /* x0 = gd->relocaddr */
+ b relocate_code
+
+relocation_return:
+
+/*
+ * Set up final (full) environment
+ */
+ bl c_runtime_cpu_setup /* we still call old routine here */
+
+/*
+ * Clear BSS section
+ */
+ ldr x9, [x18, #GD_RELOC_OFF] /* x9 = gd->reloc_off */
+ ldr x0, =__bss_start /* x0 = __bss_start in FLASH */
+ add x0, x0, x9 /* x0 = __bss_start in RAM */
+ ldr x1, =__bss_end /* x1 = __bss_end in FLASH */
+ add x1, x1, x9 /* x1 = __bss_end in RAM */
+ mov x2, #0
+clear_loop:
+ str x2, [x0]
+ add x0, x0, #8
+ cmp x0, x1
+ b.lo clear_loop
+
+ /* call board_init_r(gd_t *id, ulong dest_addr) */
+ mov x0, x18 /* gd_t */
+ ldr x1, [x18, #GD_RELOCADDR] /* dest_addr */
+ b board_init_r /* PC relative jump */
+
+ /* NOTREACHED - board_init_r() does not return */
+
+ENDPROC(_main)
diff --git a/arch/arm/cpu/armv8/exceptions.S b/arch/arm/cpu/armv8/exceptions.S
new file mode 100644
index 0000000..c64a326
--- /dev/null
+++ b/arch/arm/cpu/armv8/exceptions.S
@@ -0,0 +1,182 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <asm/ptrace.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * Exception vectors.
+ */
+ .align 11
+ENTRY(vectors)
+ ventry el_current_sync_invalid /* Current EL Synchronous Thread */
+ ventry el_current_irq_invalid /* Current EL IRQ Thread */
+ ventry el_current_fiq_invalid /* Current EL FIQ Thread */
+ ventry el_current_error_invalid /* Current EL Error Thread */
+
+ ventry el_current_sync_invalid /* Current EL Synchronous Handler */
+ ventry el_current_irq_invalid /* Current EL IRQ Handler */
+ ventry el_current_fiq_invalid /* Current EL FIQ Handler */
+ ventry el_current_error_invalid /* Current EL Error Handler */
+
+ ventry el_lower_sync_invalid /* Lower EL Synchronous 64-bit Handler */
+ ventry el_lower_irq_invalid /* Lower EL IRQ 64-bit Handler */
+ ventry el_lower_fiq_invalid /* Lower EL FIQ 64-bit Handler */
+ ventry el_lower_error_invalid /* Lower EL Error 64-bit Handler */
+
+ ventry el_lower_sync_invalid /* Lower EL Synchronous 32-bit Handler */
+ ventry el_lower_irq_invalid /* Lower EL IRQ 32-bit Handler */
+ ventry el_lower_fiq_invalid /* Lower EL FIQ 32-bit Handler */
+ ventry el_lower_error_invalid /* Lower EL Error 32-bit Handler */
+END(vectors)
+
+/*
+ * Enter Exception.
+ * This will save the processor state that is X0~X29/LR/SP/ELR/PSTATE
+ * to the stack frame.
+ */
+.macro exception_entry, el
+ sub sp, sp, #S_FRAME_SIZE - S_LR /* LR,SP,ELR,PSTATE will be saved later */
+ push x28, x29
+ push x26, x27
+ push x24, x25
+ push x22, x23
+ push x20, x21
+ push x18, x19
+ push x16, x17
+ push x14, x15
+ push x12, x13
+ push x10, x11
+ push x8, x9
+ push x6, x7
+ push x4, x5
+ push x2, x3
+ push x0, x1
+ .if \el == 2
+ add x21, sp, #S_FRAME_SIZE
+ .else
+ mrs x21, sp_el1
+ .endif
+ mrs x22, elr_el2
+ mrs x23, spsr_el2
+ stp lr, x21, [sp, #S_LR]
+ stp x22, x23, [sp, #S_PC]
+.endm
+
+/*
+ * Exit Exception.
+ * This will restore the processor state that is X0~X29/LR/SP/ELR/PSTATE
+ * from the stack frame and return from exceprion.
+ */
+.macro exception_exit, el
+ ldp x21, x22, [sp, #S_PC]
+ msr elr_el2, x21 /* restore elr register */
+ msr spsr_el2, x22 /* restore spsr register */
+ .if \el == 1
+ ldr x23, [sp, #S_SP]
+ msr sp_el1, x23 /* restore return stack pointer */
+ .endif
+ pop x0, x1 /* restore the general registers */
+ pop x2, x3
+ pop x4, x5
+ pop x6, x7
+ pop x8, x9
+ pop x10, x11
+ pop x12, x13
+ pop x14, x15
+ pop x16, x17
+ pop x18, x19
+ pop x20, x21
+ pop x22, x23
+ pop x24, x25
+ pop x26, x27
+ pop x28, x29
+ ldr lr, [sp], #S_FRAME_SIZE - S_LR /* restore LR and SP */
+ eret /* exception return */
+.endm
+
+/*
+ * Current EL exception entry
+ */
+ENTRY(el_current_sync_invalid)
+ exception_entry 2
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_sync
+ENDPROC(el_current_sync_invalid)
+
+ENTRY(el_current_irq_invalid)
+ exception_entry 2
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_irq
+ENDPROC(el_current_irq_invalid)
+
+ENTRY(el_current_fiq_invalid)
+ exception_entry 2
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_fiq
+ENDPROC(el_current_fiq_invalid)
+
+ENTRY(el_current_error_invalid)
+ exception_entry 2
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_error
+ENDPROC(el_current_error_invalid)
+
+
+/*
+ * Lower EL exception entry
+ */
+ENTRY(el_lower_sync_invalid)
+ exception_entry 1
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_sync
+ENDPROC(el_lower_sync_invalid)
+
+ENTRY(el_lower_irq_invalid)
+ exception_entry 1
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_irq
+ENDPROC(el_lower_irq_invalid)
+
+ENTRY(el_lower_fiq_invalid)
+ exception_entry 1
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_fiq
+ENDPROC(el_lower_fiq_invalid)
+
+ENTRY(el_lower_error_invalid)
+ exception_entry 1
+ mov x0, sp
+ mrs x1, esr_el2
+ b do_bad_error
+ENDPROC(el_lower_error_invalid)
diff --git a/arch/arm/cpu/armv8/interrupts.c b/arch/arm/cpu/armv8/interrupts.c
new file mode 100644
index 0000000..b4d2368
--- /dev/null
+++ b/arch/arm/cpu/armv8/interrupts.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+
+#ifdef CONFIG_USE_IRQ
+int interrupt_init (void)
+{
+ return 0;
+}
+
+/* enable IRQ interrupts */
+void enable_interrupts (void)
+{
+}
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+ return 0;
+}
+#else
+int interrupt_init (void)
+{
+ return 0;
+}
+
+void enable_interrupts (void)
+{
+ return;
+}
+int disable_interrupts (void)
+{
+ return 0;
+}
+#endif /* CONFIG_USE_IRQ */
+
+
+void show_regs (struct pt_regs *regs)
+{
+ int i;
+
+ printf("PC is at %lx\n", regs->pc);
+ printf("LR is at %lx\n", regs->regs[30]);
+ printf("PSTATE: %08lx\n", regs->pstate);
+ printf("SP : %lx\n", regs->sp);
+ for (i = 29; i >= 0; i--) {
+ printf("x%-2d: %016lx ", i, regs->regs[i]);
+ if (i % 2 == 0)
+ printf("\n");
+ }
+ printf("\n");
+}
+
+/*
+ * do_bad_sync handles the impossible case in the Synchronous Abort vector.
+ */
+void do_bad_sync(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Synchronous Abort\" handler detected, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_irq handles the impossible case in the Irq vector.
+ */
+void do_bad_irq(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Irq\" handler detected, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_fiq handles the impossible case in the Fiq vector.
+ */
+void do_bad_fiq(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Fiq\" handler detected, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_error handles the impossible case in the Error vector.
+ */
+void do_bad_error(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Error\" handler detected, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
diff --git a/arch/arm/cpu/armv8/relocate.S b/arch/arm/cpu/armv8/relocate.S
new file mode 100644
index 0000000..87b5ef0
--- /dev/null
+++ b/arch/arm/cpu/armv8/relocate.S
@@ -0,0 +1,71 @@
+/*
+ * relocate - common relocation function for ARM64 U-Boot
+ *
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+/*
+ * void relocate_code (addr_moni)
+ *
+ * This function relocates the monitor code.
+ *
+ * NOTE:
+ * GOT is used and configuration CONFIG_NEEDS_MANUAL_RELOC is needed.
+ */
+ENTRY(relocate_code)
+ /*
+ * Copy u-boot from flash to RAM
+ */
+ ldr x1, =__image_copy_start /* x1 <- copy source */
+ cmp x1, x0
+ b.eq relocate_done /* skip relocation */
+ mov x2, x0 /* x2 <- copy destination */
+ ldr x3, =__image_copy_end /* x3 <- source end address */
+
+copy_loop:
+ ldp x10, x11, [x1], #16 /* copy from source address [x1] */
+ stp x10, x11, [x2], #16 /* copy to target address [x2] */
+ cmp x1, x3 /* until source end address [x3] */
+ b.lo copy_loop
+
+ /*
+ * Fix .reloc relocations
+ */
+ ldr x9, [x18, #GD_RELOC_OFF]/* x9 <- relocation offset */
+ ldr x1, =__rel_got_start /* x1 <- rel got start ofs */
+ add x1, x1, x9 /* x1 <- rel got start in RAM */
+ ldr x2, =__rel_got_end /* x2 <- rel got end ofs */
+ add x2, x2, x9 /* x2 <- rel got end in RAM */
+fixloop:
+ ldr x10, [x1] /* x10 <- address to be fixed up */
+ add x10, x10, x9 /* x10 <- address to be fixed up in RAM*/
+ str x10, [x1]
+ add x1, x1, #8 /* each gotn entry is 8 bytes */
+ cmp x1, x2
+ b.lo fixloop
+
+relocate_done:
+ ret
+ENDPROC(relocate_code)
diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
new file mode 100644
index 0000000..328669a
--- /dev/null
+++ b/arch/arm/cpu/armv8/start.S
@@ -0,0 +1,200 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <linux/linkage.h>
+#include <asm/arch/mmu.h>
+
+/*************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ *************************************************************************/
+
+.globl _start
+_start:
+ b reset
+
+ .align 3
+
+.globl _TEXT_BASE
+_TEXT_BASE:
+ .quad CONFIG_SYS_TEXT_BASE
+
+/*
+ * These are defined in the linker script.
+ */
+.globl _end_ofs
+_end_ofs:
+ .quad _end - _start
+
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .quad __bss_start - _start
+
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .quad __bss_end - _start
+
+reset:
+ /*
+ * EL3 initialisation
+ */
+ mrs x0, CurrentEL
+ cmp x0, #0xc /* EL3? */
+ b.ne reset_nonsecure /* skip EL3 initialisation */
+
+ mov x0, #0x30 /* RES1 */
+ orr x0, x0, #(1 << 0) /* Non-secure EL1 */
+ orr x0, x0, #(1 << 8) /* HVC enable */
+ orr x0, x0, #(1 << 10) /* 64-bit EL2 */
+ msr scr_el3, x0
+
+ msr cptr_el3, xzr /* Disable copro. traps to EL3 */
+
+ /* Counter frequency initialisation */
+ ldr x0, =CONFIG_SYS_CNTFRQ
+ msr cntfrq_el0, x0
+
+ /* GIC initialisation */
+ mrs x0, mpidr_el1
+ tst x0, #15
+ b.ne 1f /* secondary CPU */
+
+ ldr x1, =GIC_DIST_BASE /* GICD_CTLR */
+ mov w0, #3 /* EnableGrp0 | EnableGrp1 */
+ str w0, [x1]
+
+1: ldr x1, =GIC_DIST_BASE + 0x80 /* GICD_IGROUPR */
+ mov w0, #~0 /* Grp1 interrupts */
+ str w0, [x1], #4
+ b.ne 2f /* Only local interrupts for secondary CPUs */
+ str w0, [x1], #4
+ str w0, [x1], #4
+
+2: ldr x1, =GIC_CPU_BASE /* GICC_CTLR */
+ ldr w0, [x1]
+ mov w0, #3 /* EnableGrp0 | EnableGrp1 */
+ str w0, [x1]
+
+ mov w0, #1 << 7 /* allow NS access to GICC_PMR */
+ str w0, [x1, #4] /* GICC_PMR */
+
+ /* SCTLR_EL2 initialisation */
+ msr sctlr_el2, xzr
+
+ /* Return to the EL2_SP1 mode from EL3 */
+ adr x0, reset_nonsecure
+ mov x1, #0x3c9 /* EL2_SP1 | D | A | I | F */
+ msr elr_el3, x0
+ msr spsr_el3, x1
+ eret
+
+ /*
+ * EL2 initialisation:
+ * MMU Disabled, iCache Disabled, dCache Disabled
+ */
+reset_nonsecure:
+ /* SCTLR_EL2 initialisation */
+ mov x0, #0x2 /* Alignment check enable */
+ msr sctlr_el2, x0
+
+ /* Initialize vBAR */
+ adr x0, vectors
+ msr vbar_el2, x0
+
+ /* Cache/BPB/TLB Invalidate */
+ bl __asm_flush_dcache_all /* dCache invalidate */
+ bl __asm_invalidate_icache_all /* iCache invalidate */
+ bl __asm_invalidate_tlb_all /* invalidate I + D TLBs */
+
+ /* Processor specific initialisation */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ bl lowlevel_init
+#endif
+
+ mrs x0, mpidr_el1
+ tst x0, #15
+ b.eq master_cpu
+
+ /*
+ * Secondary CPUs
+ */
+slave_cpu:
+
+ wfe
+ ldr x1, =SECONDARY_CPU_MAILBOX
+ ldr x0, [x1]
+ cbz x0, slave_cpu
+ br x0 /* branch to the given address */
+
+ /*
+ * Primary CPU
+ */
+master_cpu:
+
+ bl _main
+
+/*------------------------------------------------------------------------------*/
+
+ENTRY(c_runtime_cpu_setup)
+ /* If I-cache is enabled invalidate it */
+#ifndef CONFIG_SYS_ICACHE_OFF
+ ic iallu /* I+BTB cache invalidate */
+ isb sy
+#endif
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+ /*
+ * Memory region attributes:
+ *
+ * n = AttrIndx[2:0]
+ * n MAIR
+ * DEVICE_nGnRnE 000 00000000
+ * DEVICE_nGnRE 001 00000100
+ * DEVICE_GRE 010 00001100
+ * NORMAL_NC 011 01000100
+ * NORMAL 100 11111111
+ */
+ ldr x0, =MAIR(0x00, MT_DEVICE_nGnRnE) | \
+ MAIR(0x04, MT_DEVICE_nGnRE) | \
+ MAIR(0x0c, MT_DEVICE_GRE) | \
+ MAIR(0x44, MT_NORMAL_NC) | \
+ MAIR(0xff, MT_NORMAL)
+ msr mair_el2, x0
+
+ /*
+ * Set/prepare TCR and TTBR. Using 512GB (39-bit) address range.
+ */
+ ldr x0, =TCR_T0SZ(VA_BITS) | TCR_FLAGS | TCR_IPS_40BIT
+ orr x0, x0, TCR_TG0_64K
+ msr tcr_el2, x0
+#endif
+
+ /* Relocate vBAR */
+ adr x0, vectors
+ msr vbar_el2, x0
+
+ ret
+ENDPROC(c_runtime_cpu_setup)
diff --git a/arch/arm/cpu/armv8/timer.c b/arch/arm/cpu/armv8/timer.c
new file mode 100644
index 0000000..8c0cfcb
--- /dev/null
+++ b/arch/arm/cpu/armv8/timer.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <div64.h>
+
+/*
+ * Genertic Timer implementation of __udelay/get_timer/get_ticks/get_tbclk
+ * functions. If any other timers used, another implementation should be
+ * placed in platform code.
+ */
+
+static inline unsigned long tick_to_time(unsigned long tick)
+{
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, CONFIG_SYS_CNTFRQ);
+ return tick;
+}
+
+static inline unsigned long time_to_tick(unsigned long time)
+{
+ time *= CONFIG_SYS_CNTFRQ;
+ do_div(time, CONFIG_SYS_HZ);
+ return time;
+}
+
+/*
+ * Generic timer implementation of get_tbclk()
+ */
+ulong __get_tbclk (void)
+{
+ return CONFIG_SYS_HZ;
+}
+ulong get_tbclk(void)
+ __attribute__((weak, alias("__get_tbclk")));
+
+/*
+ * Generic timer implementation of get_timer()
+ */
+ulong __get_timer(ulong base)
+{
+ u64 cval;
+
+ isb();
+ asm volatile("mrs %0, cntpct_el0" : "=r" (cval));
+
+ tick_to_time(cval);
+
+ return tick_to_time(cval) - base;
+}
+ulong get_timer(ulong base)
+ __attribute__((weak, alias("__get_timer")));
+
+/*
+ * Generic timer implementation of get_ticks()
+ */
+unsigned long long __get_ticks(void)
+{
+ return get_timer(0);
+}
+unsigned long long get_ticks(void)
+ __attribute__((weak, alias("__get_ticks")));
+
+/*
+ * Generic timer implementation of __udelay()
+ */
+void ___udelay(ulong usec)
+{
+ unsigned long tmp;
+
+ tmp = get_ticks() + usec/1000;
+
+ while (get_ticks() < tmp);
+}
+void __udelay(ulong usec)
+ __attribute__((weak, alias("___udelay")));
diff --git a/arch/arm/cpu/armv8/tlb.S b/arch/arm/cpu/armv8/tlb.S
new file mode 100644
index 0000000..f0b7dbc
--- /dev/null
+++ b/arch/arm/cpu/armv8/tlb.S
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <linux/linkage.h>
+
+/*
+ * void __asm_invalidate_tlb_all(void)
+ *
+ * invalidate all tlb entries.
+ */
+ENTRY(__asm_invalidate_tlb_all)
+ tlbi alle2
+ dsb sy
+ isb
+ ret
+ENDPROC(__asm_invalidate_tlb_all)
diff --git a/arch/arm/cpu/armv8/u-boot.lds b/arch/arm/cpu/armv8/u-boot.lds
new file mode 100644
index 0000000..14842e3
--- /dev/null
+++ b/arch/arm/cpu/armv8/u-boot.lds
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2013 FengHua <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(8);
+ .text :
+ {
+ *(.__image_copy_start)
+ CPUDIR/start.o (.text*)
+ *(.text*)
+ }
+
+ . = ALIGN(8);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(8);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(8);
+
+ . = .;
+
+ . = ALIGN(8);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ }
+
+ . = ALIGN(8);
+ .reloc : {
+ __rel_got_start = .;
+ *(.got)
+ __rel_got_end = .;
+ }
+
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ _end = .;
+
+ . = ALIGN(8);
+ .bss : {
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(8);
+ __bss_end = .;
+ }
+
+ /DISCARD/ : { *(.dynsym) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
diff --git a/arch/arm/include/asm/arch-armv8/armv8.h b/arch/arm/include/asm/arch-armv8/armv8.h
new file mode 100644
index 0000000..8506125
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv8/armv8.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARMV8_ARMV8_H
+#define __ASM_ARMV8_ARMV8_H
+
+/*
+ * SCTLR_EL2 bits definitions
+ */
+#define CR_M (1 << 0) /* MMU enable */
+#define CR_A (1 << 1) /* Alignment abort enable */
+#define CR_C (1 << 2) /* Dcache enable */
+#define CR_SA (1 << 3) /* Stack Alignment Check Enable */
+#define CR_I (1 << 12) /* Icache enable */
+#define CR_WXN (1 << 19) /* Write Permision Imply XN */
+#define CR_EE (1 << 25) /* Exception (Big) Endian */
+
+void v8_outer_cache_enable(void);
+void v8_outer_cache_disable(void);
+void v8_outer_cache_flush_all(void);
+void v8_outer_cache_inval_all(void);
+void v8_outer_cache_flush_range(u64 start, u64 end);
+void v8_outer_cache_inval_range(u64 start, u64 end);
+
+#endif /* __ASM_ARMV8_ARMV8_H */
diff --git a/arch/arm/include/asm/arch-armv8/gpio.h b/arch/arm/include/asm/arch-armv8/gpio.h
new file mode 100644
index 0000000..0fbbcaf
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv8/gpio.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_ARMV8_GPIO_H_
+#define _ASM_ARMV8_GPIO_H_
+
+#endif /* _ASM_ARMV8_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-armv8/mmu.h b/arch/arm/include/asm/arch-armv8/mmu.h
new file mode 100644
index 0000000..3647f0a
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv8/mmu.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_ARMV8_MMU_H_
+#define _ASM_ARMV8_MMU_H_
+
+#ifdef __ASSEMBLY__
+#define _AC(X,Y) X
+#define _AT(T,X) X
+#else
+#define __AC(X,Y) (X##Y)
+#define _AC(X,Y) __AC(X,Y)
+#define _AT(T,X) ((T)(X))
+#endif
+
+#define UL(x) _AC(x, UL)
+
+/***************************************************************/
+/*
+ * The following definitions are related each other, shoud be
+ * calculated specifically.
+ */
+#define VA_BITS (39)
+
+/* PAGE_SHIFT determines the page size */
+#undef PAGE_SIZE
+#define PAGE_SHIFT 16
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT 29
+#define SECTION_SIZE (_AC(1, UL) << SECTION_SHIFT)
+#define SECTION_MASK (~(SECTION_SIZE-1))
+/***************************************************************/
+
+/*
+ * Memory types available.
+ */
+#define MT_DEVICE_nGnRnE 0
+#define MT_DEVICE_nGnRE 1
+#define MT_DEVICE_GRE 2
+#define MT_NORMAL_NC 3
+#define MT_NORMAL 4
+
+#define MAIR(attr, mt) ((attr) << ((mt) * 8))
+
+/*
+ * Hardware page table definitions.
+ *
+ * Level 2 descriptor (PMD).
+ */
+#define PMD_TYPE_MASK (3 << 0)
+#define PMD_TYPE_FAULT (0 << 0)
+#define PMD_TYPE_TABLE (3 << 0)
+#define PMD_TYPE_SECT (1 << 0)
+
+/*
+ * Section
+ */
+#define PMD_SECT_S (UL(3) << 8)
+#define PMD_SECT_AF (UL(1) << 10)
+#define PMD_SECT_NG (UL(1) << 11)
+#define PMD_SECT_PXN (UL(1) << 53)
+#define PMD_SECT_UXN (UL(1) << 54)
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PMD_ATTRINDX(t) ((t) << 2)
+#define PMD_ATTRINDX_MASK (7 << 2)
+
+/*
+ * TCR_EL2 flags.
+ */
+#define TCR_T0SZ(x) ((64 - (x)) << 0)
+#define TCR_IRGN_NC (0 << 8)
+#define TCR_IRGN_WBWA (1 << 8)
+#define TCR_IRGN_WT (2 << 8)
+#define TCR_IRGN_WBnWA (3 << 8)
+#define TCR_IRGN_MASK (3 << 8)
+#define TCR_ORGN_NC (0 << 10)
+#define TCR_ORGN_WBWA (1 << 10)
+#define TCR_ORGN_WT (2 << 10)
+#define TCR_ORGN_WBnWA (3 << 10)
+#define TCR_ORGN_MASK (3 << 10)
+#define TCR_SHARED (3 << 12)
+#define TCR_TG0_4K (0 << 14)
+#define TCR_TG0_64K (1 << 14)
+#define TCR_TG0_16K (2 << 14)
+#define TCR_IPS_40BIT (2 << 16)
+
+/* PTWs cacheable, inner/outer WBWA not shareable */
+#define TCR_FLAGS TCR_IRGN_WBWA | TCR_ORGN_WBWA
+
+#endif /* _ASM_ARMV8_MMU_H_ */
diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h
index c3489f1..a02d989 100644
--- a/arch/arm/include/asm/byteorder.h
+++ b/arch/arm/include/asm/byteorder.h
@@ -23,10 +23,22 @@
# define __SWAB_64_THRU_32__
#endif
+#ifndef CONFIG_ARMV8
+
#ifdef __ARMEB__
#include <linux/byteorder/big_endian.h>
#else
#include <linux/byteorder/little_endian.h>
#endif
+#else /* CONFIG_ARMV8 */
+
+#ifdef __AARCH64EB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
+
+#endif /* CONFIG_ARMV8 */
+
#endif
diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 99b703e..30f008e 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -9,4 +9,14 @@
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
+
+#ifdef CONFIG_ARMV8
+/*
+ * Currently, GOT is used to relocate u-boot and
+ * configuration CONFIG_NEEDS_MANUAL_RELOC is needed.
+ */
+#define CONFIG_NEEDS_MANUAL_RELOC
+#define CONFIG_PHYS_64BIT
+#endif
+
#endif
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 79a9597..27b82b9 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -47,6 +47,10 @@ struct arch_global_data {
#include <asm-generic/global_data.h>
-#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8")
+#ifndef CONFIG_ARMV8
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8")
+#else
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("x18")
+#endif
#endif /* __ASM_GBL_DATA_H */
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 1fbc531..dfb85e8 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -75,42 +75,42 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
-extern inline void __raw_writesb(unsigned int addr, const void *data, int bytelen)
+extern inline void __raw_writesb(unsigned long addr, const void *data, int bytelen)
{
uint8_t *buf = (uint8_t *)data;
while(bytelen--)
__arch_putb(*buf++, addr);
}
-extern inline void __raw_writesw(unsigned int addr, const void *data, int wordlen)
+extern inline void __raw_writesw(unsigned long addr, const void *data, int wordlen)
{
uint16_t *buf = (uint16_t *)data;
while(wordlen--)
__arch_putw(*buf++, addr);
}
-extern inline void __raw_writesl(unsigned int addr, const void *data, int longlen)
+extern inline void __raw_writesl(unsigned long addr, const void *data, int longlen)
{
uint32_t *buf = (uint32_t *)data;
while(longlen--)
__arch_putl(*buf++, addr);
}
-extern inline void __raw_readsb(unsigned int addr, void *data, int bytelen)
+extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
{
uint8_t *buf = (uint8_t *)data;
while(bytelen--)
*buf++ = __arch_getb(addr);
}
-extern inline void __raw_readsw(unsigned int addr, void *data, int wordlen)
+extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
{
uint16_t *buf = (uint16_t *)data;
while(wordlen--)
*buf++ = __arch_getw(addr);
}
-extern inline void __raw_readsl(unsigned int addr, void *data, int longlen)
+extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
{
uint32_t *buf = (uint32_t *)data;
while(longlen--)
diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h
index ff13f36..70be196 100644
--- a/arch/arm/include/asm/macro.h
+++ b/arch/arm/include/asm/macro.h
@@ -54,5 +54,31 @@
bcs 1b
.endm
+#ifdef CONFIG_ARMV8
+/*
+ * Register aliases.
+ */
+lr .req x30 // link register
+
+/*
+ * Stack pushing/popping (register pairs only).
+ * Equivalent to store decrement before,
+ * load increment after.
+ */
+.macro push, xreg1, xreg2
+ stp \xreg1, \xreg2, [sp, #-16]!
+.endm
+
+.macro pop, xreg1, xreg2
+ ldp \xreg1, \xreg2, [sp], #16
+.endm
+
+.macro ventry label
+ .align 7
+ b \label
+.endm
+
+#endif /* CONFIG_ARMV8 */
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_ARM_MACRO_H__ */
diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h
index c412486..0da38cb 100644
--- a/arch/arm/include/asm/posix_types.h
+++ b/arch/arm/include/asm/posix_types.h
@@ -19,6 +19,8 @@
* assume GCC is being used.
*/
+#ifndef CONFIG_ARMV8
+
typedef unsigned short __kernel_dev_t;
typedef unsigned long __kernel_ino_t;
typedef unsigned short __kernel_mode_t;
@@ -44,6 +46,35 @@ typedef unsigned int __kernel_gid32_t;
typedef unsigned short __kernel_old_uid_t;
typedef unsigned short __kernel_old_gid_t;
+#else /* CONFIG_ARMV8 */
+
+typedef unsigned short __kernel_dev_t;
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef long __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+
+#endif /* CONFIG_ARMV8 */
+
#ifdef __GNUC__
typedef long long __kernel_loff_t;
#endif
diff --git a/arch/arm/include/asm/proc-armv/ptrace.h b/arch/arm/include/asm/proc-armv/ptrace.h
index 79cc644..69822a2 100644
--- a/arch/arm/include/asm/proc-armv/ptrace.h
+++ b/arch/arm/include/asm/proc-armv/ptrace.h
@@ -12,6 +12,8 @@
#include <linux/config.h>
+#ifndef CONFIG_ARMV8
+
#define USR26_MODE 0x00
#define FIQ26_MODE 0x01
#define IRQ26_MODE 0x02
@@ -106,4 +108,40 @@ static inline int valid_user_regs(struct pt_regs *regs)
#endif /* __ASSEMBLY__ */
+#else /* CONFIG_ARMV8 */
+
+#define PCMASK 0
+
+#define S_X0 (0) /* offsetof(struct pt_regs, regs[0]) */
+#define S_X1 (8) /* offsetof(struct pt_regs, regs[1]) */
+#define S_X2 (16) /* offsetof(struct pt_regs, regs[2]) */
+#define S_X3 (24 /* offsetof(struct pt_regs, regs[3]) */
+#define S_X4 (32) /* offsetof(struct pt_regs, regs[4]) */
+#define S_X5 (40) /* offsetof(struct pt_regs, regs[5]) */
+#define S_X6 (48) /* offsetof(struct pt_regs, regs[6]) */
+#define S_X7 (56) /* offsetof(struct pt_regs, regs[7]) */
+#define S_LR (240) /* offsetof(struct pt_regs, regs[30]) */
+#define S_SP (248) /* offsetof(struct pt_regs, sp) */
+#define S_PC (256) /* offsetof(struct pt_regs, pc) */
+#define S_PSTATE (264) /* offsetof(struct pt_regs, pstate) */
+#define S_FRAME_SIZE (272) /* sizeof(struct pt_regs) */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored on the stack during an
+ * exception. Note that sizeof(struct pt_regs) has to be a multiple of 16 (for
+ * stack alignment). struct user_pt_regs must form a prefix of struct pt_regs.
+ */
+struct pt_regs {
+ u64 regs[31];
+ u64 sp;
+ u64 pc;
+ u64 pstate;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_ARMV8 */
+
#endif
diff --git a/arch/arm/include/asm/proc-armv/system.h b/arch/arm/include/asm/proc-armv/system.h
index b4cfa68..fd98b7b 100644
--- a/arch/arm/include/asm/proc-armv/system.h
+++ b/arch/arm/include/asm/proc-armv/system.h
@@ -15,6 +15,8 @@
/*
* Save the current interrupt enable state & disable IRQs
*/
+#ifndef CONFIG_ARMV8
+
#define local_irq_save(x) \
({ \
unsigned long temp; \
@@ -109,7 +111,61 @@
: "r" (x) \
: "memory")
-#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
+#else /* CONFIG_ARMV8 */
+
+/*
+ * Save the current interrupt enable state
+ * and disable IRQs/FIQs
+ */
+#define local_irq_save(flags) \
+ ({ \
+ asm volatile( \
+ "mrs %0, daif" \
+ "msr daifset, #3" \
+ : "=r" (flags) \
+ : \
+ : "memory"); \
+ })
+
+/*
+ * restore saved IRQ & FIQ state
+ */
+#define local_irq_restore(flags) \
+ ({ \
+ asm volatile( \
+ "msr daif, %0" \
+ : \
+ : "r" (flags) \
+ : "memory"); \
+ })
+
+/*
+ * Enable IRQs/FIQs
+ */
+#define local_irq_enable() \
+ ({ \
+ asm volatile( \
+ "msr daifclr, #3" \
+ : \
+ : \
+ : "memory"); \
+ })
+
+/*
+ * Disable IRQs/FIQs
+ */
+#define local_irq_disable() \
+ ({ \
+ asm volatile( \
+ "msr daifset, #3" \
+ : \
+ : \
+ : "memory"); \
+ })
+
+#endif /* CONFIG_ARMV8 */
+
+#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) || defined(CONFIG_ARMV8)
/*
* On the StrongARM, "swp" is terminally broken since it bypasses the
* cache totally. This means that the cache becomes inconsistent, and,
diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
index 71dc049..128dd3e 100644
--- a/arch/arm/include/asm/types.h
+++ b/arch/arm/include/asm/types.h
@@ -18,8 +18,13 @@ typedef __signed__ int __s32;
typedef unsigned int __u32;
#if defined(__GNUC__)
+#ifndef CONFIG_ARMV8
__extension__ typedef __signed__ long long __s64;
__extension__ typedef unsigned long long __u64;
+#else /* CONFIG_ARMV8 */
+__extension__ typedef __signed__ long __s64;
+__extension__ typedef unsigned long __u64;
+#endif /* CONFIG_ARMV8 */
#endif
/*
@@ -36,10 +41,19 @@ typedef unsigned short u16;
typedef signed int s32;
typedef unsigned int u32;
+#ifndef CONFIG_ARMV8
typedef signed long long s64;
typedef unsigned long long u64;
+#else /* CONFIG_ARMV8 */
+typedef signed long s64;
+typedef unsigned long u64;
+#endif /* CONFIG_ARMV8 */
+#ifndef CONFIG_ARMV8
#define BITS_PER_LONG 32
+#else /* CONFIG_ARMV8 */
+#define BITS_PER_LONG 64
+#endif /* CONFIG_ARMV8 */
/* Dma addresses are 32-bits wide. */
diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h
index 2b5fce8..3ef5538 100644
--- a/arch/arm/include/asm/u-boot.h
+++ b/arch/arm/include/asm/u-boot.h
@@ -44,6 +44,10 @@ typedef struct bd_info {
#endif /* !CONFIG_SYS_GENERIC_BOARD */
/* For image.h:image_check_target_arch() */
+#ifndef CONFIG_ARMV8
#define IH_ARCH_DEFAULT IH_ARCH_ARM
+#else
+#define IH_ARCH_DEFAULT IH_ARCH_ARM64
+#endif
#endif /* _U_BOOT_H_ */
diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h
index 44593a8..a051e97 100644
--- a/arch/arm/include/asm/unaligned.h
+++ b/arch/arm/include/asm/unaligned.h
@@ -8,6 +8,8 @@
/*
* Select endianness
*/
+#ifndef CONFIG_ARMV8
+
#ifndef __ARMEB__
#define get_unaligned __get_unaligned_le
#define put_unaligned __put_unaligned_le
@@ -16,4 +18,16 @@
#define put_unaligned __put_unaligned_be
#endif
+#else /* CONFIG_ARMV8 */
+
+#ifndef __AARCH64EB__
+#define get_unaligned __get_unaligned_le
+#define put_unaligned __put_unaligned_le
+#else
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+#endif
+
+#endif /* CONFIG_ARMV8 */
+
#endif /* _ASM_ARM_UNALIGNED_H */
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 4e78723..86b19e2 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -10,6 +10,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(ARCH).o
LIBGCC = $(obj)libgcc.o
+ifndef CONFIG_ARMV8
GLSOBJS += _ashldi3.o
GLSOBJS += _ashrdi3.o
GLSOBJS += _divsi3.o
@@ -21,9 +22,12 @@ GLSOBJS += _umodsi3.o
GLCOBJS += div0.o
SOBJS-y += crt0.o
+endif
ifndef CONFIG_SPL_BUILD
+ifndef CONFIG_ARMV8
SOBJS-y += relocate.o
+endif
ifndef CONFIG_SYS_GENERIC_BOARD
COBJS-y += board.o
endif
@@ -38,11 +42,15 @@ else
COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
endif
+ifndef CONFIG_ARMV8
COBJS-y += interrupts.o
+endif
COBJS-y += reset.o
COBJS-y += cache.o
+ifndef CONFIG_ARMV8
COBJS-y += cache-cp15.o
+endif
SRCS := $(GLSOBJS:.o=.S) $(GLCOBJS:.o=.c) \
$(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 34f50b0..2a92d69 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -344,7 +344,11 @@ void board_init_f(ulong bootflag)
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
/* reserve TLB table */
+#ifndef CONFIG_ARMV8
gd->arch.tlb_size = 4096 * 4;
+#else
+ gd->arch.tlb_size = 0x10000;
+#endif
addr -= gd->arch.tlb_size;
/* round down to next 64 kB limit */
@@ -419,6 +423,7 @@ void board_init_f(ulong bootflag)
}
#endif
+#ifndef CONFIG_ARMV8
/* setup stackpointer for exeptions */
gd->irq_sp = addr_sp;
#ifdef CONFIG_USE_IRQ
@@ -431,6 +436,10 @@ void board_init_f(ulong bootflag)
/* 8-byte alignment for ABI compliance */
addr_sp &= ~0x07;
+#else /* CONFIG_ARMV8 */
+ /* 16-byte alignment for ABI compliance */
+ addr_sp &= ~0x0f;
+#endif /* CONFIG_ARMV8 */
#else
addr_sp += 128; /* leave 32 words for abort-stack */
gd->irq_sp = addr_sp;
@@ -523,6 +532,15 @@ void board_init_r(gd_t *id, ulong dest_addr)
debug("monitor flash len: %08lX\n", monitor_flash_len);
board_init(); /* Setup chipselects */
+
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ /*
+ * We have to relocate the command table manually
+ */
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
+
/*
* TODO: printing of the clock inforamtion of the board is now
* implemented as part of bdinfo command. Currently only support for
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index eefb456..d9a86b9 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -222,6 +222,7 @@ static void boot_prep_linux(bootm_headers_t *images)
/* Subcommand: GO */
static void boot_jump_linux(bootm_headers_t *images, int flag)
{
+#ifndef CONFIG_ARMV8
unsigned long machid = gd->bd->bi_arch_number;
char *s;
void (*kernel_entry)(int zero, int arch, uint params);
@@ -248,6 +249,21 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)
if (!fake)
kernel_entry(0, machid, r2);
+#else
+ void (*kernel_entry)(void *fdt_addr);
+ int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
+
+ kernel_entry = (void (*)(void *fdt_addr))images->ep;
+
+ debug("## Transferring control to Linux (at address %lx)" \
+ "...\n", (ulong)kernel_entry);
+ bootstage_mark(BOOTSTAGE_ID_RUN_OS);
+
+ announce_and_cleanup(fake);
+
+ if (!fake)
+ kernel_entry(images->ft_addr);
+#endif
}
/* Main Entry point for arm bootm implementation
diff --git a/common/image.c b/common/image.c
index 56a5a62..7182549 100644
--- a/common/image.c
+++ b/common/image.c
@@ -81,6 +81,7 @@ static const table_entry_t uimage_arch[] = {
{ IH_ARCH_NDS32, "nds32", "NDS32", },
{ IH_ARCH_OPENRISC, "or1k", "OpenRISC 1000",},
{ IH_ARCH_SANDBOX, "sandbox", "Sandbox", },
+ { IH_ARCH_ARM64, "arm64", "AArch64", },
{ -1, "", "", },
};
diff --git a/doc/README.armv8 b/doc/README.armv8
new file mode 100644
index 0000000..737c875
--- /dev/null
+++ b/doc/README.armv8
@@ -0,0 +1,14 @@
+Notes:
+
+1. Currenly, u-boot running at EL2.
+
+2. GOT is used to relocate u-boot and CONFIG_NEEDS_MANUAL_RELOC is needed.
+
+3. Fdt should be placed in the first 512 megabytes from the start of the kernel image.
+ So, fdt_high should be defined specially. Please reference linux/Documentation/arm64/booting.txt.
+
+4. Generic board is supported.
+
+TODO:
+
+1. So much print info are formated with %08lx, maybe it should be modified to %016lx.
diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c
index 8fb1765..10676f1 100644
--- a/examples/standalone/stubs.c
+++ b/examples/standalone/stubs.c
@@ -39,6 +39,7 @@ gd_t *global_data;
" bctr\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r11");
#elif defined(CONFIG_ARM)
+#ifndef CONFIG_ARMV8
/*
* r8 holds the pointer to the global_data, ip is a call-clobbered
* register
@@ -50,6 +51,20 @@ gd_t *global_data;
" ldr ip, [r8, %0]\n" \
" ldr pc, [ip, %1]\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "ip");
+#else
+/*
+ * x18 holds the pointer to the global_data, x9 is a call-clobbered
+ * register
+ */
+#define EXPORT_FUNC(x) \
+ asm volatile ( \
+" .globl " #x "\n" \
+#x ":\n" \
+" ldr x9, [x18, %0]\n" \
+" ldr x9, [x9, %1]\n" \
+" br x9\n" \
+ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "x19");
+#endif
#elif defined(CONFIG_MIPS)
/*
* k0 ($26) holds the pointer to the global_data; t9 ($25) is a call-
diff --git a/include/image.h b/include/image.h
index f93a393..12262d7 100644
--- a/include/image.h
+++ b/include/image.h
@@ -156,6 +156,7 @@ struct lmb;
#define IH_ARCH_SANDBOX 19 /* Sandbox architecture (test only) */
#define IH_ARCH_NDS32 20 /* ANDES Technology - NDS32 */
#define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */
+#define IH_ARCH_ARM64 22 /* ARM64 */
/*
* Image Types
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 2/4] board support of arm64
2013-08-24 1:06 [U-Boot] [PATCH v5 0/4] arm64 patch fenghua at phytium.com.cn
` (2 preceding siblings ...)
2013-08-24 1:06 ` fenghua at phytium.com.cn
@ 2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-24 1:06 ` fenghua at phytium.com.cn
` (6 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: fenghua at phytium.com.cn @ 2013-08-24 1:06 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
Changes for v4:
- No
board/armltd/dts/vexpress64.dts | 439 ++++++++++++++++++++++++++++++++++
board/armltd/vexpress64/Makefile | 43 ++++
board/armltd/vexpress64/vexpress64.c | 79 ++++++
boards.cfg | 1 +
include/configs/vexpress_aemv8a.h | 203 ++++++++++++++++
5 files changed, 765 insertions(+)
create mode 100644 board/armltd/dts/vexpress64.dts
create mode 100644 board/armltd/vexpress64/Makefile
create mode 100644 board/armltd/vexpress64/vexpress64.c
create mode 100644 include/configs/vexpress_aemv8a.h
diff --git a/board/armltd/dts/vexpress64.dts b/board/armltd/dts/vexpress64.dts
new file mode 100644
index 0000000..067fea7
--- /dev/null
+++ b/board/armltd/dts/vexpress64.dts
@@ -0,0 +1,439 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+ /* boot configurations for u-boot */
+ config {
+ /*bootdelay = <1>;*/
+ kernel-offset = <0x100000>;
+ rootdisk-offset = <0x800000>;
+ bootcmd = "bootm 0x100000 0x800000:0x2000000";
+ };
+};
+
+/ {
+ model = "RTSM_VE_AEMv8A";
+ compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ /* chosen */
+ /* generated by u-boot */
+
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+ };
+
+ gic: interrupt-controller at 2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x2c001000 0 0x1000>,
+ <0x0 0x2c002000 0 0x1000>,
+ <0x0 0x2c004000 0 0x2000>,
+ <0x0 0x2c006000 0 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xff01>,
+ <1 14 0xff01>,
+ <1 11 0xff01>,
+ <1 10 0xff01>;
+ clock-frequency = <100000000>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+
+ motherboard {
+ arm,v2m-memory-map = "rs1";
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ ranges;
+
+ flash at 0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ vram at 2,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <2 0x00000000 0x00800000>;
+ };
+
+ ethernet at 2,02000000 {
+ compatible = "smsc,lan91c111";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ };
+
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
+
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
+
+ iofpga at 3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg at 010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_sysctl: sysctl at 020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ };
+
+ aaci at 040000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ mmci at 050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9 10>;
+ cd-gpios = <&v2m_sysreg 0 0>;
+ wp-gpios = <&v2m_sysreg 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ kmi at 060000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi at 070000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ v2m_serial0: uart at 090000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial1: uart at 0a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial2: uart at 0b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial3: uart at 0c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ wdt at 0f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ v2m_timer01: timer at 110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ v2m_timer23: timer at 120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ rtc at 170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ clcd at 1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+ clock-names = "clcdclk", "apb_pclk";
+ };
+ };
+
+ v2m_fixed_3v3: fixedregulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mcc {
+ compatible = "arm,vexpress,config-bus", "simple-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ v2m_oscclk1: osc at 1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 63500000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ reset at 0 {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga at 0 {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown at 0 {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot at 0 {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode at 0 {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
+ };
+ };
+
+ panels {
+ panel at 0 {
+ compatible = "panel";
+ mode = "VGA";
+ refresh = <60>;
+ xres = <640>;
+ yres = <480>;
+ pixclock = <39721>;
+ left_margin = <40>;
+ right_margin = <24>;
+ upper_margin = <32>;
+ lower_margin = <11>;
+ hsync_len = <96>;
+ vsync_len = <2>;
+ sync = <0>;
+ vmode = "FB_VMODE_NONINTERLACED";
+ tim2 = "TIM2_BCD", "TIM2_IPC";
+ cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)";
+ caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888";
+ bpp = <16>;
+ };
+
+ panel at 1 {
+ compatible = "panel";
+ mode = "XVGA";
+ refresh = <60>;
+ xres = <1024>;
+ yres = <768>;
+ pixclock = <15748>;
+ left_margin = <152>;
+ right_margin = <48>;
+ upper_margin = <23>;
+ lower_margin = <3>;
+ hsync_len = <104>;
+ vsync_len = <4>;
+ sync = <0>;
+ vmode = "FB_VMODE_NONINTERLACED";
+ tim2 = "TIM2_BCD", "TIM2_IPC";
+ cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)";
+ caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888";
+ bpp = <16>;
+ };
+ };
+};
diff --git a/board/armltd/vexpress64/Makefile b/board/armltd/vexpress64/Makefile
new file mode 100644
index 0000000..77f0c3f
--- /dev/null
+++ b/board/armltd/vexpress64/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := vexpress64.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
new file mode 100644
index 0000000..4febece
--- /dev/null
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2013
+ * Phytium Technology, <www.phytium.com.cn>
+ * David Feng, fenghua at phytium.com.cn
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
+ return 0;
+}
+
+int timer_init(void)
+{
+ return 0;
+}
+
+/*
+ * Board specific reset that is system reset.
+ */
+void reset_cpu(ulong addr)
+{
+}
+
+/*
+ * Default implementation of gpio related functiuons
+ * Real implementation should be in gpio driver.
+ * fdtdec.c need this function, but currenty no gpio driver defined
+ */
+int __gpio_get_value(unsigned gpio)
+{
+ return 0;
+}
+int gpio_get_value(unsigned gpio)
+ __attribute__((weak, alias("__gpio_get_value")));
+
+void __gpio_set_value(unsigned gpio, int vlaue)
+{
+ return;
+}
+void gpio_set_value(unsigned gpio, int vlaue)
+ __attribute__((weak, alias("__gpio_set_value")));
+
+void __gpio_request(unsigned gpio, const char *label)
+{
+ return;
+}
+void gpio_request(unsigned gpio, const char *label)
+ __attribute__((weak, alias("__gpio_request")));
diff --git a/boards.cfg b/boards.cfg
index 4b1f960..85a92a0 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -1196,5 +1196,6 @@ gr_ep2s60 sparc leon3 - gaisler
grsim sparc leon3 - gaisler
gr_xc3s_1500 sparc leon3 - gaisler
coreboot-x86 x86 x86 coreboot chromebook-x86 coreboot coreboot:SYS_TEXT_BASE=0x01110000
+vexpress_aemv8a arm armv8 vexpress64 armltd - vexpress_aemv8a:ARMV8
# Target ARCH CPU Board name Vendor SoC Options
########################################################################################################################
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
new file mode 100644
index 0000000..d207d00
--- /dev/null
+++ b/include/configs/vexpress_aemv8a.h
@@ -0,0 +1,203 @@
+/*
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VEXPRESS_AEMV8A_H
+#define __VEXPRESS_AEMV8A_H
+
+#define DEBUG
+
+/* #define CONFIG_SYS_GENERIC_BOARD */
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* Cache Definitions */
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_ICACHE_OFF
+
+#define CONFIG_IDENT_STRING " vexpress_aemv8a"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a"
+
+/* Link Definitions */
+#define CONFIG_SYS_TEXT_BASE 0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x400000)
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_EMBED
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_DEFAULT_DEVICE_TREE vexpress64
+
+/* SMP Definitions */
+#define SECONDARY_CPU_MAILBOX 0x8000fff8
+
+/* CS register bases for the original memory map. */
+#define V2M_PA_CS0 0x00000000
+#define V2M_PA_CS1 0x14000000
+#define V2M_PA_CS2 0x18000000
+#define V2M_PA_CS3 0x1c000000
+#define V2M_PA_CS4 0x0c000000
+#define V2M_PA_CS5 0x10000000
+
+#define V2M_PERIPH_OFFSET(x) (x << 16)
+#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
+#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
+#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
+
+#define V2M_BASE 0x80000000
+
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0 (V2M_PA_CS0)
+#define V2M_NOR1 (V2M_PA_CS4)
+#define V2M_SRAM (V2M_PA_CS1)
+
+/* Common peripherals relative to CS7. */
+#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
+#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
+#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
+#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
+
+#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
+#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
+#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
+#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
+
+#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
+
+#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
+#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
+
+#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
+#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
+
+#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
+
+#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
+
+/* System register offsets. */
+#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
+
+/* Generic Timer Definitions */
+#define CONFIG_SYS_CNTFRQ (0x1800000) /* 24MHz */
+
+/* Generic Interrupt Controller Definitions */
+#define GIC_DIST_BASE (0x2C001000)
+#define GIC_CPU_BASE (0x2C002000)
+
+#define CONFIG_SYS_MEMTEST_START V2M_BASE
+#define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000)
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 24000000
+#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
+ (void *)CONFIG_SYS_SERIAL1}
+#define CONFIG_CONS_INDEX 0
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0 V2M_UART0
+#define CONFIG_SYS_SERIAL1 V2M_UART1
+
+/* Command line configuration */
+#define CONFIG_MENU
+//#define CONFIG_MENU_SHOW
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PXE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000) /* load address */
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2048 MB */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+
+#define CONFIG_SYS_HZ 1000
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x80100000\0" \
+ "kernel_addr=0x100000\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "console=ttyAMA0,38400n8\0"
+
+#define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0"
+#define CONFIG_BOOTCOMMAND "bootm $kernel_addr $ramdisk_addr:$ramdisk_size"
+#define CONFIG_BOOTDELAY -1
+
+/* Store environment@top of flash */
+#define CONFIG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_SIZE 0x1000
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT "VExpress# "
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+#endif /* __VEXPRESS_AEMV8A_H */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 2/4] board support of arm64
2013-08-24 1:06 [U-Boot] [PATCH v5 0/4] arm64 patch fenghua at phytium.com.cn
` (3 preceding siblings ...)
2013-08-24 1:06 ` [U-Boot] [PATCH v5 2/4] board " fenghua at phytium.com.cn
@ 2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-24 1:06 ` [U-Boot] [PATCH v5 3/4] generic board patch of manual reloc and zero gd_t fenghua at phytium.com.cn
` (5 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: fenghua at phytium.com.cn @ 2013-08-24 1:06 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
board/armltd/dts/vexpress64.dts | 439 ++++++++++++++++++++++++++++++++++
board/armltd/vexpress64/Makefile | 43 ++++
board/armltd/vexpress64/vexpress64.c | 79 ++++++
boards.cfg | 1 +
include/configs/vexpress_aemv8a.h | 203 ++++++++++++++++
5 files changed, 765 insertions(+)
create mode 100644 board/armltd/dts/vexpress64.dts
create mode 100644 board/armltd/vexpress64/Makefile
create mode 100644 board/armltd/vexpress64/vexpress64.c
create mode 100644 include/configs/vexpress_aemv8a.h
diff --git a/board/armltd/dts/vexpress64.dts b/board/armltd/dts/vexpress64.dts
new file mode 100644
index 0000000..067fea7
--- /dev/null
+++ b/board/armltd/dts/vexpress64.dts
@@ -0,0 +1,439 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+ /* boot configurations for u-boot */
+ config {
+ /*bootdelay = <1>;*/
+ kernel-offset = <0x100000>;
+ rootdisk-offset = <0x800000>;
+ bootcmd = "bootm 0x100000 0x800000:0x2000000";
+ };
+};
+
+/ {
+ model = "RTSM_VE_AEMv8A";
+ compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ /* chosen */
+ /* generated by u-boot */
+
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+ };
+
+ gic: interrupt-controller at 2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x2c001000 0 0x1000>,
+ <0x0 0x2c002000 0 0x1000>,
+ <0x0 0x2c004000 0 0x2000>,
+ <0x0 0x2c006000 0 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xff01>,
+ <1 14 0xff01>,
+ <1 11 0xff01>,
+ <1 10 0xff01>;
+ clock-frequency = <100000000>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+
+ motherboard {
+ arm,v2m-memory-map = "rs1";
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ ranges;
+
+ flash at 0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ vram at 2,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <2 0x00000000 0x00800000>;
+ };
+
+ ethernet at 2,02000000 {
+ compatible = "smsc,lan91c111";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ };
+
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
+
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
+
+ iofpga at 3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg at 010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_sysctl: sysctl at 020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ };
+
+ aaci at 040000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ mmci at 050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9 10>;
+ cd-gpios = <&v2m_sysreg 0 0>;
+ wp-gpios = <&v2m_sysreg 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ kmi at 060000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi at 070000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ v2m_serial0: uart at 090000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial1: uart at 0a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial2: uart at 0b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial3: uart at 0c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ wdt at 0f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ v2m_timer01: timer at 110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ v2m_timer23: timer at 120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ rtc at 170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ clcd at 1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+ clock-names = "clcdclk", "apb_pclk";
+ };
+ };
+
+ v2m_fixed_3v3: fixedregulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mcc {
+ compatible = "arm,vexpress,config-bus", "simple-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ v2m_oscclk1: osc at 1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 63500000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ reset at 0 {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga at 0 {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown at 0 {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot at 0 {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode at 0 {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
+ };
+ };
+
+ panels {
+ panel at 0 {
+ compatible = "panel";
+ mode = "VGA";
+ refresh = <60>;
+ xres = <640>;
+ yres = <480>;
+ pixclock = <39721>;
+ left_margin = <40>;
+ right_margin = <24>;
+ upper_margin = <32>;
+ lower_margin = <11>;
+ hsync_len = <96>;
+ vsync_len = <2>;
+ sync = <0>;
+ vmode = "FB_VMODE_NONINTERLACED";
+ tim2 = "TIM2_BCD", "TIM2_IPC";
+ cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)";
+ caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888";
+ bpp = <16>;
+ };
+
+ panel at 1 {
+ compatible = "panel";
+ mode = "XVGA";
+ refresh = <60>;
+ xres = <1024>;
+ yres = <768>;
+ pixclock = <15748>;
+ left_margin = <152>;
+ right_margin = <48>;
+ upper_margin = <23>;
+ lower_margin = <3>;
+ hsync_len = <104>;
+ vsync_len = <4>;
+ sync = <0>;
+ vmode = "FB_VMODE_NONINTERLACED";
+ tim2 = "TIM2_BCD", "TIM2_IPC";
+ cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)";
+ caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888";
+ bpp = <16>;
+ };
+ };
+};
diff --git a/board/armltd/vexpress64/Makefile b/board/armltd/vexpress64/Makefile
new file mode 100644
index 0000000..77f0c3f
--- /dev/null
+++ b/board/armltd/vexpress64/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := vexpress64.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
new file mode 100644
index 0000000..4febece
--- /dev/null
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2013
+ * Phytium Technology, <www.phytium.com.cn>
+ * David Feng, fenghua at phytium.com.cn
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
+ return 0;
+}
+
+int timer_init(void)
+{
+ return 0;
+}
+
+/*
+ * Board specific reset that is system reset.
+ */
+void reset_cpu(ulong addr)
+{
+}
+
+/*
+ * Default implementation of gpio related functiuons
+ * Real implementation should be in gpio driver.
+ * fdtdec.c need this function, but currenty no gpio driver defined
+ */
+int __gpio_get_value(unsigned gpio)
+{
+ return 0;
+}
+int gpio_get_value(unsigned gpio)
+ __attribute__((weak, alias("__gpio_get_value")));
+
+void __gpio_set_value(unsigned gpio, int vlaue)
+{
+ return;
+}
+void gpio_set_value(unsigned gpio, int vlaue)
+ __attribute__((weak, alias("__gpio_set_value")));
+
+void __gpio_request(unsigned gpio, const char *label)
+{
+ return;
+}
+void gpio_request(unsigned gpio, const char *label)
+ __attribute__((weak, alias("__gpio_request")));
diff --git a/boards.cfg b/boards.cfg
index 4b1f960..85a92a0 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -1196,5 +1196,6 @@ gr_ep2s60 sparc leon3 - gaisler
grsim sparc leon3 - gaisler
gr_xc3s_1500 sparc leon3 - gaisler
coreboot-x86 x86 x86 coreboot chromebook-x86 coreboot coreboot:SYS_TEXT_BASE=0x01110000
+vexpress_aemv8a arm armv8 vexpress64 armltd - vexpress_aemv8a:ARMV8
# Target ARCH CPU Board name Vendor SoC Options
########################################################################################################################
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
new file mode 100644
index 0000000..d207d00
--- /dev/null
+++ b/include/configs/vexpress_aemv8a.h
@@ -0,0 +1,203 @@
+/*
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VEXPRESS_AEMV8A_H
+#define __VEXPRESS_AEMV8A_H
+
+#define DEBUG
+
+/* #define CONFIG_SYS_GENERIC_BOARD */
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* Cache Definitions */
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_ICACHE_OFF
+
+#define CONFIG_IDENT_STRING " vexpress_aemv8a"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a"
+
+/* Link Definitions */
+#define CONFIG_SYS_TEXT_BASE 0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x400000)
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_EMBED
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_DEFAULT_DEVICE_TREE vexpress64
+
+/* SMP Definitions */
+#define SECONDARY_CPU_MAILBOX 0x8000fff8
+
+/* CS register bases for the original memory map. */
+#define V2M_PA_CS0 0x00000000
+#define V2M_PA_CS1 0x14000000
+#define V2M_PA_CS2 0x18000000
+#define V2M_PA_CS3 0x1c000000
+#define V2M_PA_CS4 0x0c000000
+#define V2M_PA_CS5 0x10000000
+
+#define V2M_PERIPH_OFFSET(x) (x << 16)
+#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
+#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
+#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
+
+#define V2M_BASE 0x80000000
+
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0 (V2M_PA_CS0)
+#define V2M_NOR1 (V2M_PA_CS4)
+#define V2M_SRAM (V2M_PA_CS1)
+
+/* Common peripherals relative to CS7. */
+#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
+#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
+#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
+#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
+
+#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
+#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
+#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
+#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
+
+#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
+
+#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
+#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
+
+#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
+#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
+
+#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
+
+#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
+
+/* System register offsets. */
+#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
+
+/* Generic Timer Definitions */
+#define CONFIG_SYS_CNTFRQ (0x1800000) /* 24MHz */
+
+/* Generic Interrupt Controller Definitions */
+#define GIC_DIST_BASE (0x2C001000)
+#define GIC_CPU_BASE (0x2C002000)
+
+#define CONFIG_SYS_MEMTEST_START V2M_BASE
+#define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000)
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 24000000
+#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
+ (void *)CONFIG_SYS_SERIAL1}
+#define CONFIG_CONS_INDEX 0
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0 V2M_UART0
+#define CONFIG_SYS_SERIAL1 V2M_UART1
+
+/* Command line configuration */
+#define CONFIG_MENU
+//#define CONFIG_MENU_SHOW
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PXE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000) /* load address */
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2048 MB */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+
+#define CONFIG_SYS_HZ 1000
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x80100000\0" \
+ "kernel_addr=0x100000\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "console=ttyAMA0,38400n8\0"
+
+#define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0"
+#define CONFIG_BOOTCOMMAND "bootm $kernel_addr $ramdisk_addr:$ramdisk_size"
+#define CONFIG_BOOTDELAY -1
+
+/* Store environment@top of flash */
+#define CONFIG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_SIZE 0x1000
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT "VExpress# "
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+#endif /* __VEXPRESS_AEMV8A_H */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 3/4] generic board patch of manual reloc and zero gd_t
2013-08-24 1:06 [U-Boot] [PATCH v5 0/4] arm64 patch fenghua at phytium.com.cn
` (4 preceding siblings ...)
2013-08-24 1:06 ` fenghua at phytium.com.cn
@ 2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-24 1:06 ` fenghua at phytium.com.cn
` (4 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: fenghua at phytium.com.cn @ 2013-08-24 1:06 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
1. function board_init_f in board_f.c should firstly zero gd_t structure
before it call initcall_run_list, otherwise the debug print will go run
if DEBUG is defined. Because the printf function will use global data
to determine whether serial port is initialized and could be written.
2. function board_init_r in board_r.c should firstly relocate init_sequence_r
table before it call initcall_run_list. Command table also should be relocated.
Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
Changes for v4:
- fix the generic board_f.c, remove zero_global_data from init_sequence_f array
and move it to board_init_f() function with CONFIG_X86 switch. The previous
fixup is inaccurate.
common/board_f.c | 19 +++++++++++++------
common/board_r.c | 17 +++++++++++++++++
2 files changed, 30 insertions(+), 6 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c
index 0ada1af..98e24c3 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -458,7 +458,11 @@ static int reserve_round_4k(void)
static int reserve_mmu(void)
{
/* reserve TLB table */
+#ifndef CONFIG_ARMV8
gd->arch.tlb_size = 4096 * 4;
+#else
+ gd->arch.tlb_size = 0x10000;
+#endif
gd->relocaddr -= gd->arch.tlb_size;
/* round down to next 64 kB limit */
@@ -610,7 +614,7 @@ static int reserve_stacks(void)
* TODO(sjg at chromium.org): Perhaps create arch_reserve_stack()
* to handle this and put in arch/xxx/lib/stack.c
*/
-# ifdef CONFIG_ARM
+# if defined(CONFIG_ARM) && !defined(CONFIG_ARMV8)
# ifdef CONFIG_USE_IRQ
gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
@@ -807,11 +811,6 @@ static int mark_bootstage(void)
}
static init_fnc_t init_sequence_f[] = {
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
- !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
- !defined(CONFIG_MPC86xx) && !defined(CONFIG_X86)
- zero_global_data,
-#endif
#ifdef CONFIG_SANDBOX
setup_ram_buf,
#endif
@@ -1005,6 +1004,14 @@ void board_init_f(ulong boot_flags)
gd = &data;
#endif
+ /*
+ * Zero gd_t first, otherwise the debug print in initcall_run_list
+ * function before zero_global_data is called will go wrong.
+ */
+#ifndef CONFIG_X86
+ zero_global_data();
+#endif
+
gd->flags = boot_flags;
if (initcall_run_list(init_sequence_f))
diff --git a/common/board_r.c b/common/board_r.c
index 86ca1cb..1b4bdd2 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -157,6 +157,13 @@ static int initr_reloc_global_data(void)
*/
gd->env_addr += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
#endif
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ /*
+ * We have to relocate the command table manually
+ */
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
return 0;
}
@@ -899,6 +906,7 @@ init_fnc_t init_sequence_r[] = {
initr_modem,
#endif
run_main_loop,
+ NULL,
};
void board_init_r(gd_t *new_gd, ulong dest_addr)
@@ -906,6 +914,15 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
#ifndef CONFIG_X86
gd = new_gd;
#endif
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ /*
+ * We have to relocate the init_sequence_r table manually
+ */
+ init_fnc_t *init_fnc_ptr;
+ for (init_fnc_ptr = init_sequence_r; *init_fnc_ptr; ++init_fnc_ptr)
+ *init_fnc_ptr = (init_fnc_t *)((unsigned long)(*init_fnc_ptr) + gd->reloc_off);
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
+
if (initcall_run_list(init_sequence_r))
hang();
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 3/4] generic board patch of manual reloc and zero gd_t
2013-08-24 1:06 [U-Boot] [PATCH v5 0/4] arm64 patch fenghua at phytium.com.cn
` (5 preceding siblings ...)
2013-08-24 1:06 ` [U-Boot] [PATCH v5 3/4] generic board patch of manual reloc and zero gd_t fenghua at phytium.com.cn
@ 2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-24 1:06 ` [U-Boot] [PATCH v5 4/4] 64bit initrd start address support fenghua at phytium.com.cn
` (3 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: fenghua at phytium.com.cn @ 2013-08-24 1:06 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
1. function board_init_f in board_f.c should firstly zero gd_t structure
before it call initcall_run_list, otherwise the debug print will go run
if DEBUG is defined. Because the printf function will use global data
to determine whether serial port is initialized and could be written.
2. function board_init_r in board_r.c should firstly relocate init_sequence_r
table before it call initcall_run_list. Command table also should be relocated.
Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
Changes for v4:
- fix the generic board_f.c, remove zero_global_data from init_sequence_f array
and move it to board_init_f() function with CONFIG_X86 switch. The previous
fixup is inaccurate.
common/board_f.c | 19 +++++++++++++------
common/board_r.c | 17 +++++++++++++++++
2 files changed, 30 insertions(+), 6 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c
index 0ada1af..98e24c3 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -458,7 +458,11 @@ static int reserve_round_4k(void)
static int reserve_mmu(void)
{
/* reserve TLB table */
+#ifndef CONFIG_ARMV8
gd->arch.tlb_size = 4096 * 4;
+#else
+ gd->arch.tlb_size = 0x10000;
+#endif
gd->relocaddr -= gd->arch.tlb_size;
/* round down to next 64 kB limit */
@@ -610,7 +614,7 @@ static int reserve_stacks(void)
* TODO(sjg at chromium.org): Perhaps create arch_reserve_stack()
* to handle this and put in arch/xxx/lib/stack.c
*/
-# ifdef CONFIG_ARM
+# if defined(CONFIG_ARM) && !defined(CONFIG_ARMV8)
# ifdef CONFIG_USE_IRQ
gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
@@ -807,11 +811,6 @@ static int mark_bootstage(void)
}
static init_fnc_t init_sequence_f[] = {
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
- !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
- !defined(CONFIG_MPC86xx) && !defined(CONFIG_X86)
- zero_global_data,
-#endif
#ifdef CONFIG_SANDBOX
setup_ram_buf,
#endif
@@ -1005,6 +1004,14 @@ void board_init_f(ulong boot_flags)
gd = &data;
#endif
+ /*
+ * Zero gd_t first, otherwise the debug print in initcall_run_list
+ * function before zero_global_data is called will go wrong.
+ */
+#ifndef CONFIG_X86
+ zero_global_data();
+#endif
+
gd->flags = boot_flags;
if (initcall_run_list(init_sequence_f))
diff --git a/common/board_r.c b/common/board_r.c
index 86ca1cb..1b4bdd2 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -157,6 +157,13 @@ static int initr_reloc_global_data(void)
*/
gd->env_addr += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
#endif
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ /*
+ * We have to relocate the command table manually
+ */
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
return 0;
}
@@ -899,6 +906,7 @@ init_fnc_t init_sequence_r[] = {
initr_modem,
#endif
run_main_loop,
+ NULL,
};
void board_init_r(gd_t *new_gd, ulong dest_addr)
@@ -906,6 +914,15 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
#ifndef CONFIG_X86
gd = new_gd;
#endif
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ /*
+ * We have to relocate the init_sequence_r table manually
+ */
+ init_fnc_t *init_fnc_ptr;
+ for (init_fnc_ptr = init_sequence_r; *init_fnc_ptr; ++init_fnc_ptr)
+ *init_fnc_ptr = (init_fnc_t *)((unsigned long)(*init_fnc_ptr) + gd->reloc_off);
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
+
if (initcall_run_list(init_sequence_r))
hang();
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 4/4] 64bit initrd start address support
2013-08-24 1:06 [U-Boot] [PATCH v5 0/4] arm64 patch fenghua at phytium.com.cn
` (6 preceding siblings ...)
2013-08-24 1:06 ` fenghua at phytium.com.cn
@ 2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-24 1:06 ` fenghua at phytium.com.cn
` (2 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: fenghua at phytium.com.cn @ 2013-08-24 1:06 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
This patch fix the fdt_initrd function.
It will get #adress_cells property fisrt, then write "linux,initrd-start"
and "linux,initrd-end" property value to fdt according to address cell size
such that the 64bit initrd start address could be supported.
Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
Changes for v4:
- No
common/fdt_support.c | 66 ++++++++++++++++++++++++++------------------------
1 file changed, 34 insertions(+), 32 deletions(-)
diff --git a/common/fdt_support.c b/common/fdt_support.c
index b034c98..9bc5821 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -21,6 +21,34 @@
*/
DECLARE_GLOBAL_DATA_PTR;
+/*
+ * Get cells len in bytes
+ * if #NNNN-cells property is 2 then len is 8
+ * otherwise len is 4
+ */
+static int get_cells_len(void *blob, char *nr_cells_name)
+{
+ const fdt32_t *cell;
+
+ cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
+ if (cell && fdt32_to_cpu(*cell) == 2)
+ return 8;
+
+ return 4;
+}
+
+/*
+ * Write a 4 or 8 byte big endian cell
+ */
+static void write_cell(u8 *addr, u64 val, int size)
+{
+ int shift = (size - 1) * 8;
+ while (size-- > 0) {
+ *addr++ = (val >> shift) & 0xff;
+ shift -= 8;
+ }
+}
+
/**
* fdt_getprop_u32_default - Find a node and return it's property or a default
*
@@ -131,9 +159,9 @@ static int fdt_fixup_stdout(void *fdt, int chosenoff)
int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
{
- int nodeoffset;
+ int nodeoffset, addr_cell_len;
int err, j, total;
- fdt32_t tmp;
+ fdt64_t tmp;
const char *path;
uint64_t addr, size;
@@ -170,9 +198,11 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
return err;
}
+ addr_cell_len = get_cells_len(fdt, "#address-cells");
+
path = fdt_getprop(fdt, nodeoffset, "linux,initrd-start", NULL);
if ((path == NULL) || force) {
- tmp = cpu_to_fdt32(initrd_start);
+ write_cell((u8 *)&tmp, initrd_start, addr_cell_len);
err = fdt_setprop(fdt, nodeoffset,
"linux,initrd-start", &tmp, sizeof(tmp));
if (err < 0) {
@@ -181,7 +211,7 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
fdt_strerror(err));
return err;
}
- tmp = cpu_to_fdt32(initrd_end);
+ write_cell((u8 *)&tmp, initrd_end, addr_cell_len);
err = fdt_setprop(fdt, nodeoffset,
"linux,initrd-end", &tmp, sizeof(tmp));
if (err < 0) {
@@ -343,34 +373,6 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat,
do_fixup_by_compat(fdt, compat, prop, &tmp, 4, create);
}
-/*
- * Get cells len in bytes
- * if #NNNN-cells property is 2 then len is 8
- * otherwise len is 4
- */
-static int get_cells_len(void *blob, char *nr_cells_name)
-{
- const fdt32_t *cell;
-
- cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
- if (cell && fdt32_to_cpu(*cell) == 2)
- return 8;
-
- return 4;
-}
-
-/*
- * Write a 4 or 8 byte big endian cell
- */
-static void write_cell(u8 *addr, u64 val, int size)
-{
- int shift = (size - 1) * 8;
- while (size-- > 0) {
- *addr++ = (val >> shift) & 0xff;
- shift -= 8;
- }
-}
-
#ifdef CONFIG_NR_DRAM_BANKS
#define MEMORY_BANKS_MAX CONFIG_NR_DRAM_BANKS
#else
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 4/4] 64bit initrd start address support
2013-08-24 1:06 [U-Boot] [PATCH v5 0/4] arm64 patch fenghua at phytium.com.cn
` (7 preceding siblings ...)
2013-08-24 1:06 ` [U-Boot] [PATCH v5 4/4] 64bit initrd start address support fenghua at phytium.com.cn
@ 2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-27 16:40 ` [U-Boot] [PATCH v5 0/4] arm64 patch Ian Campbell
2013-08-28 11:22 ` Marek Vasut
10 siblings, 0 replies; 18+ messages in thread
From: fenghua at phytium.com.cn @ 2013-08-24 1:06 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
This patch fix the fdt_initrd function.
It will get #adress_cells property fisrt, then write "linux,initrd-start"
and "linux,initrd-end" property value to fdt according to address cell size
such that the 64bit initrd start address could be supported.
Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
Changes for v4:
- No
common/fdt_support.c | 66 ++++++++++++++++++++++++++------------------------
1 file changed, 34 insertions(+), 32 deletions(-)
diff --git a/common/fdt_support.c b/common/fdt_support.c
index b034c98..9bc5821 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -21,6 +21,34 @@
*/
DECLARE_GLOBAL_DATA_PTR;
+/*
+ * Get cells len in bytes
+ * if #NNNN-cells property is 2 then len is 8
+ * otherwise len is 4
+ */
+static int get_cells_len(void *blob, char *nr_cells_name)
+{
+ const fdt32_t *cell;
+
+ cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
+ if (cell && fdt32_to_cpu(*cell) == 2)
+ return 8;
+
+ return 4;
+}
+
+/*
+ * Write a 4 or 8 byte big endian cell
+ */
+static void write_cell(u8 *addr, u64 val, int size)
+{
+ int shift = (size - 1) * 8;
+ while (size-- > 0) {
+ *addr++ = (val >> shift) & 0xff;
+ shift -= 8;
+ }
+}
+
/**
* fdt_getprop_u32_default - Find a node and return it's property or a default
*
@@ -131,9 +159,9 @@ static int fdt_fixup_stdout(void *fdt, int chosenoff)
int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
{
- int nodeoffset;
+ int nodeoffset, addr_cell_len;
int err, j, total;
- fdt32_t tmp;
+ fdt64_t tmp;
const char *path;
uint64_t addr, size;
@@ -170,9 +198,11 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
return err;
}
+ addr_cell_len = get_cells_len(fdt, "#address-cells");
+
path = fdt_getprop(fdt, nodeoffset, "linux,initrd-start", NULL);
if ((path == NULL) || force) {
- tmp = cpu_to_fdt32(initrd_start);
+ write_cell((u8 *)&tmp, initrd_start, addr_cell_len);
err = fdt_setprop(fdt, nodeoffset,
"linux,initrd-start", &tmp, sizeof(tmp));
if (err < 0) {
@@ -181,7 +211,7 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
fdt_strerror(err));
return err;
}
- tmp = cpu_to_fdt32(initrd_end);
+ write_cell((u8 *)&tmp, initrd_end, addr_cell_len);
err = fdt_setprop(fdt, nodeoffset,
"linux,initrd-end", &tmp, sizeof(tmp));
if (err < 0) {
@@ -343,34 +373,6 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat,
do_fixup_by_compat(fdt, compat, prop, &tmp, 4, create);
}
-/*
- * Get cells len in bytes
- * if #NNNN-cells property is 2 then len is 8
- * otherwise len is 4
- */
-static int get_cells_len(void *blob, char *nr_cells_name)
-{
- const fdt32_t *cell;
-
- cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
- if (cell && fdt32_to_cpu(*cell) == 2)
- return 8;
-
- return 4;
-}
-
-/*
- * Write a 4 or 8 byte big endian cell
- */
-static void write_cell(u8 *addr, u64 val, int size)
-{
- int shift = (size - 1) * 8;
- while (size-- > 0) {
- *addr++ = (val >> shift) & 0xff;
- shift -= 8;
- }
-}
-
#ifdef CONFIG_NR_DRAM_BANKS
#define MEMORY_BANKS_MAX CONFIG_NR_DRAM_BANKS
#else
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 0/4] arm64 patch
2013-08-24 1:06 [U-Boot] [PATCH v5 0/4] arm64 patch fenghua at phytium.com.cn
` (8 preceding siblings ...)
2013-08-24 1:06 ` fenghua at phytium.com.cn
@ 2013-08-27 16:40 ` Ian Campbell
2013-08-28 14:03 ` FengHua
2013-08-28 11:22 ` Marek Vasut
10 siblings, 1 reply; 18+ messages in thread
From: Ian Campbell @ 2013-08-27 16:40 UTC (permalink / raw)
To: u-boot
On Sat, 2013-08-24 at 09:06 +0800, fenghua at phytium.com.cn wrote:
> From: David Feng <fenghua@phytium.com.cn>
Hi David,
I don't suppose you have a convenient git tree do you?
Thanks,
Ian.
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 0/4] arm64 patch
2013-08-24 1:06 [U-Boot] [PATCH v5 0/4] arm64 patch fenghua at phytium.com.cn
` (9 preceding siblings ...)
2013-08-27 16:40 ` [U-Boot] [PATCH v5 0/4] arm64 patch Ian Campbell
@ 2013-08-28 11:22 ` Marek Vasut
10 siblings, 0 replies; 18+ messages in thread
From: Marek Vasut @ 2013-08-28 11:22 UTC (permalink / raw)
To: u-boot
Dear fenghua at phytium.com.cn,
> From: David Feng <fenghua@phytium.com.cn>
>
> The porting has been merged with arm architecture.
> Most architecture codes are placed in arch/arm/cpu/armv8 directory.
> Generic board is also supported after a few bugs are fixed.
>
> Changes for v4:
> - fix the generic board_f.c, remove zero_global_data from init_sequence_f
> array and move it to board_init_f() function with CONFIG_X86 switch. The
> previous fixup is inaccurate.
> - Replace __ARMEB__ with __AARCH64EB__ in byteorder.h and unaligned.h,
> gcc for aarch64 use __AARCH64EB__ and __AARCH64EL__ to identify endian.
> - Some modification to README.armv8
>
> David Feng (4):
> core support of arm64
> board support of arm64
> generic board patch of manual reloc and zero gd_t
> 64bit initrd start address support
>
> arch/arm/config.mk | 4 +
> arch/arm/cpu/armv8/Makefile | 56 ++++
> arch/arm/cpu/armv8/cache.S | 145 ++++++++++
> arch/arm/cpu/armv8/cache_v8.c | 291 ++++++++++++++++++++
> arch/arm/cpu/armv8/config.mk | 31 +++
> arch/arm/cpu/armv8/cpu.c | 68 +++++
> arch/arm/cpu/armv8/crt0.S | 130 +++++++++
> arch/arm/cpu/armv8/exceptions.S | 182 +++++++++++++
> arch/arm/cpu/armv8/interrupts.c | 116 ++++++++
> arch/arm/cpu/armv8/relocate.S | 71 +++++
> arch/arm/cpu/armv8/start.S | 200 ++++++++++++++
> arch/arm/cpu/armv8/timer.c | 95 +++++++
> arch/arm/cpu/armv8/tlb.S | 38 +++
> arch/arm/cpu/armv8/u-boot.lds | 83 ++++++
> arch/arm/include/asm/arch-armv8/armv8.h | 44 ++++
> arch/arm/include/asm/arch-armv8/gpio.h | 26 ++
> arch/arm/include/asm/arch-armv8/mmu.h | 117 ++++++++
> arch/arm/include/asm/byteorder.h | 12 +
> arch/arm/include/asm/config.h | 10 +
> arch/arm/include/asm/global_data.h | 6 +-
> arch/arm/include/asm/io.h | 12 +-
> arch/arm/include/asm/macro.h | 26 ++
> arch/arm/include/asm/posix_types.h | 31 +++
> arch/arm/include/asm/proc-armv/ptrace.h | 38 +++
> arch/arm/include/asm/proc-armv/system.h | 58 +++-
> arch/arm/include/asm/types.h | 14 +
> arch/arm/include/asm/u-boot.h | 4 +
> arch/arm/include/asm/unaligned.h | 14 +
> arch/arm/lib/Makefile | 8 +
> arch/arm/lib/board.c | 18 ++
> arch/arm/lib/bootm.c | 16 ++
> board/armltd/dts/vexpress64.dts | 439
> +++++++++++++++++++++++++++++++ board/armltd/vexpress64/Makefile |
> 43 +++
> board/armltd/vexpress64/vexpress64.c | 79 ++++++
> boards.cfg | 1 +
> common/board_f.c | 19 +-
> common/board_r.c | 17 ++
> common/fdt_support.c | 66 ++---
> common/image.c | 1 +
> doc/README.armv8 | 14 +
> examples/standalone/stubs.c | 15 ++
> include/configs/vexpress_aemv8a.h | 203 ++++++++++++++
> include/image.h | 1 +
> 43 files changed, 2816 insertions(+), 46 deletions(-)
> create mode 100644 arch/arm/cpu/armv8/Makefile
> create mode 100644 arch/arm/cpu/armv8/cache.S
> create mode 100644 arch/arm/cpu/armv8/cache_v8.c
> create mode 100644 arch/arm/cpu/armv8/config.mk
> create mode 100644 arch/arm/cpu/armv8/cpu.c
> create mode 100644 arch/arm/cpu/armv8/crt0.S
> create mode 100644 arch/arm/cpu/armv8/exceptions.S
> create mode 100644 arch/arm/cpu/armv8/interrupts.c
> create mode 100644 arch/arm/cpu/armv8/relocate.S
> create mode 100644 arch/arm/cpu/armv8/start.S
> create mode 100644 arch/arm/cpu/armv8/timer.c
> create mode 100644 arch/arm/cpu/armv8/tlb.S
> create mode 100644 arch/arm/cpu/armv8/u-boot.lds
> create mode 100644 arch/arm/include/asm/arch-armv8/armv8.h
> create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
> create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
> create mode 100644 board/armltd/dts/vexpress64.dts
> create mode 100644 board/armltd/vexpress64/Makefile
> create mode 100644 board/armltd/vexpress64/vexpress64.c
> create mode 100644 doc/README.armv8
> create mode 100644 include/configs/vexpress_aemv8a.h
Quick skim over the patches seems rather OK.
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 0/4] arm64 patch
2013-08-27 16:40 ` [U-Boot] [PATCH v5 0/4] arm64 patch Ian Campbell
@ 2013-08-28 14:03 ` FengHua
0 siblings, 0 replies; 18+ messages in thread
From: FengHua @ 2013-08-28 14:03 UTC (permalink / raw)
To: u-boot
Yes, currently I clone a git tree from u-boot and work on it. It's a little complicated when I update a new version patch. I must restore the git tree status and make modification then commit and generate the patches.
Actually I use svn before. I am learning git now.
Many Thanks.
Best Regards.
David
> -----????-----
> ???: "Ian Campbell" <ijc@hellion.org.uk>
> ????: 2013?8?28? ???
> ???: fenghua at phytium.com.cn
> ??: u-boot at lists.denx.de, trini at ti.com
> ??: Re: [U-Boot] [PATCH v5 0/4] arm64 patch
>
> On Sat, 2013-08-24 at 09:06 +0800, fenghua at phytium.com.cn wrote:
> > From: David Feng <fenghua@phytium.com.cn>
>
> Hi David,
>
> I don't suppose you have a convenient git tree do you?
>
> Thanks,
> Ian.
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 1/4] core support of arm64
2013-08-24 1:06 ` [U-Boot] [PATCH v5 1/4] core support of arm64 fenghua at phytium.com.cn
@ 2013-09-06 20:31 ` Scott Wood
2013-09-07 14:56 ` FengHua
0 siblings, 1 reply; 18+ messages in thread
From: Scott Wood @ 2013-09-06 20:31 UTC (permalink / raw)
To: u-boot
On Sat, 2013-08-24 at 09:06 +0800, fenghua at phytium.com.cn wrote:
> From: David Feng <fenghua@phytium.com.cn>
>
> Signed-off-by: David Feng <fenghua@phytium.com.cn>
> ---
> Changeds for v4:
> - Replace __ARMEB__ with __AARCH64EB__ in byteorder.h and unaligned.h,
> gcc for aarch64 use __AARCH64EB__ and __AARCH64EL__ to identify endian.
> - Some modification to README.armv8
>
> arch/arm/config.mk | 4 +
> arch/arm/cpu/armv8/Makefile | 56 ++++++
> arch/arm/cpu/armv8/cache.S | 145 +++++++++++++++
> arch/arm/cpu/armv8/cache_v8.c | 291 +++++++++++++++++++++++++++++++
> arch/arm/cpu/armv8/config.mk | 31 ++++
> arch/arm/cpu/armv8/cpu.c | 68 ++++++++
> arch/arm/cpu/armv8/crt0.S | 130 ++++++++++++++
> arch/arm/cpu/armv8/exceptions.S | 182 +++++++++++++++++++
> arch/arm/cpu/armv8/interrupts.c | 116 ++++++++++++
> arch/arm/cpu/armv8/relocate.S | 71 ++++++++
> arch/arm/cpu/armv8/start.S | 200 +++++++++++++++++++++
> arch/arm/cpu/armv8/timer.c | 95 ++++++++++
> arch/arm/cpu/armv8/tlb.S | 38 ++++
> arch/arm/cpu/armv8/u-boot.lds | 83 +++++++++
Subject says "arm64", files say "armv8".
Some of these, such as relocate.S, probably are not going to be
armv8-specific but just arm64-specific.
> arch/arm/include/asm/arch-armv8/armv8.h | 44 +++++
> arch/arm/include/asm/arch-armv8/gpio.h | 26 +++
> arch/arm/include/asm/arch-armv8/mmu.h | 117 +++++++++++++
> arch/arm/include/asm/byteorder.h | 12 ++
> arch/arm/include/asm/config.h | 10 ++
> arch/arm/include/asm/global_data.h | 6 +-
> arch/arm/include/asm/io.h | 12 +-
> arch/arm/include/asm/macro.h | 26 +++
> arch/arm/include/asm/posix_types.h | 31 ++++
> arch/arm/include/asm/proc-armv/ptrace.h | 38 ++++
> arch/arm/include/asm/proc-armv/system.h | 58 +++++-
> arch/arm/include/asm/types.h | 14 ++
> arch/arm/include/asm/u-boot.h | 4 +
> arch/arm/include/asm/unaligned.h | 14 ++
> arch/arm/lib/Makefile | 8 +
> arch/arm/lib/board.c | 18 ++
> arch/arm/lib/bootm.c | 16 ++
> common/image.c | 1 +
> doc/README.armv8 | 14 ++
> examples/standalone/stubs.c | 15 ++
> include/image.h | 1 +
> 35 files changed, 1987 insertions(+), 8 deletions(-)
> create mode 100644 arch/arm/cpu/armv8/Makefile
> create mode 100644 arch/arm/cpu/armv8/cache.S
> create mode 100644 arch/arm/cpu/armv8/cache_v8.c
> create mode 100644 arch/arm/cpu/armv8/config.mk
> create mode 100644 arch/arm/cpu/armv8/cpu.c
> create mode 100644 arch/arm/cpu/armv8/crt0.S
> create mode 100644 arch/arm/cpu/armv8/exceptions.S
> create mode 100644 arch/arm/cpu/armv8/interrupts.c
> create mode 100644 arch/arm/cpu/armv8/relocate.S
> create mode 100644 arch/arm/cpu/armv8/start.S
> create mode 100644 arch/arm/cpu/armv8/timer.c
> create mode 100644 arch/arm/cpu/armv8/tlb.S
> create mode 100644 arch/arm/cpu/armv8/u-boot.lds
> create mode 100644 arch/arm/include/asm/arch-armv8/armv8.h
> create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
> create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
> create mode 100644 doc/README.armv8
>
> diff --git a/arch/arm/config.mk b/arch/arm/config.mk
> index ce3903b..f1c6a7b 100644
> --- a/arch/arm/config.mk
> +++ b/arch/arm/config.mk
> @@ -74,7 +74,9 @@ endif
> endif
>
> # needed for relocation
> +ifndef CONFIG_ARMV8
> LDFLAGS_u-boot += -pie
> +endif
CONFIG_ARM64 (until we fix this, of course)
> #
> # FIXME: binutils versions < 2.22 have a bug in the assembler where
> @@ -95,6 +97,8 @@ endif
> endif
>
> # check that only R_ARM_RELATIVE relocations are generated
> +ifndef CONFIG_ARMV8
> ifneq ($(CONFIG_SPL_BUILD),y)
> ALL-y += checkarmreloc
> endif
> +endif
ARM64, though I've got a patch coming that will make the check work with
arm64.
Likewise elsewhere -- most if not all of the CONFIG_ARMV8 uses should be
CONFIG_ARM64.
> +/*
> + * void __asm_flush_dcache_level(level)
> + *
> + * clean and invalidate one level cache.
> + *
> + * x0: cache level
> + * x1~x9: clobbered
> + */
> +ENTRY(__asm_flush_dcache_level)
Why the leading underscores?
> +/* to activate the MMU we need to set up virtual memory */
> +static inline void mmu_setup(void)
> +{
> + int i, j;
> + bd_t *bd = gd->bd;
> + static int table_initialized = 0;
> +
> + if (!table_initialized) {
Instead of this, have separate mmu_setup() and mmu_enable().
> + /* Setup an identity-mapping for all spaces */
> + for (i = 0; i < (PAGE_SIZE >> 3); i++)
> + set_pgtable_section(i, MT_DEVICE_nGnRnE);
> +
> + /* Setup an identity-mapping for all RAM space */
> + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
> + debug("%s: bank: %d\n", __func__, i);
> + for (j = bd->bi_dram[i].start >> SECTION_SHIFT;
> + j < (bd->bi_dram[i].start + bd->bi_dram[i].size) >> SECTION_SHIFT;
> + j++) {
> + set_pgtable_section(i, MT_NORMAL);
> + }
> + }
This is odd alignment... Why are the second and third instances of "j"
lined up with "bd->..." rather than with the first "j"?
> +#endif /* CONFIG_SYS_DCACHE_OFF */
> +
> +#ifndef CONFIG_SYS_ICACHE_OFF
This isn't new to this patch, but I'd like to point out that the whole
"CONFIG" versus "CONFIG_SYS" thing is widely misused and should probably
just go away when we kconfigize.
> +/*
> + * Stub implementations for outer cache operations
> + */
> +void __v8_outer_cache_enable(void) {}
> +void v8_outer_cache_enable(void)
> + __attribute__((weak, alias("__v8_outer_cache_enable")));
> +
> +void __v8_outer_cache_disable(void) {}
> +void v8_outer_cache_disable(void)
> + __attribute__((weak, alias("__v8_outer_cache_disable")));
> +
> +void __v8_outer_cache_flush_all(void) {}
> +void v8_outer_cache_flush_all(void)
> + __attribute__((weak, alias("__v8_outer_cache_flush_all")));
> +
> +void __v8_outer_cache_inval_all(void) {}
> +void v8_outer_cache_inval_all(void)
> + __attribute__((weak, alias("__v8_outer_cache_inval_all")));
> +
> +void __v8_outer_cache_flush_range(u64 start, u64 end) {}
> +void v8_outer_cache_flush_range(u64 start, u64 end)
> + __attribute__((weak, alias("__v8_outer_cache_flush_range")));
> +
> +void __v8_outer_cache_inval_range(u64 start, u64 end) {}
> +void v8_outer_cache_inval_range(u64 start, u64 end)
> + __attribute__((weak, alias("__v8_outer_cache_inval_range")));
What level do you anticipate these being overriden at? Individual
chips? Why?
> diff --git a/arch/arm/cpu/armv8/config.mk b/arch/arm/cpu/armv8/config.mk
> new file mode 100644
> index 0000000..aae2170
> --- /dev/null
> +++ b/arch/arm/cpu/armv8/config.mk
> @@ -0,0 +1,31 @@
> +#
> +# Copyright (c) 2013 FengHua <fenghua@phytium.com.cn>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +PLATFORM_RELFLAGS += -fno-common -ffixed-x18
Is -ffixed-x18 necessary, or will GCC do the right thing when it sees
that x18 has been declared as a register variable?
> diff --git a/arch/arm/cpu/armv8/exceptions.S b/arch/arm/cpu/armv8/exceptions.S
> new file mode 100644
> index 0000000..c64a326
> --- /dev/null
> +++ b/arch/arm/cpu/armv8/exceptions.S
> @@ -0,0 +1,182 @@
> +/*
> + * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
I'm skeptical that you actually rewrote this from scratch (e.g. same
registers are used in some places where there's no reason to pick any
particular register, overall structure very similar, etc). It looks
like you just changed the comments and names up a bit.
Any code that you did not write *from scratch* must be identified, with
copyrights retained, and can only be used if it can be licensed GPLv2+
(unless Tom/Wolfgang say they'll accept v2-only code from Linux in this
case).
> +void show_regs (struct pt_regs *regs)
> +{
> + int i;
> +
> + printf("PC is at %lx\n", regs->pc);
> + printf("LR is at %lx\n", regs->regs[30]);
> + printf("PSTATE: %08lx\n", regs->pstate);
> + printf("SP : %lx\n", regs->sp);
> + for (i = 29; i >= 0; i--) {
> + printf("x%-2d: %016lx ", i, regs->regs[i]);
> + if (i % 2 == 0)
> + printf("\n");
> + }
> + printf("\n");
> +}
This is almost identical to the Linux code, yet I don't see any
attribution (and the license is incompatible).
> diff --git a/arch/arm/cpu/armv8/relocate.S b/arch/arm/cpu/armv8/relocate.S
> new file mode 100644
> index 0000000..87b5ef0
> --- /dev/null
> +++ b/arch/arm/cpu/armv8/relocate.S
> @@ -0,0 +1,71 @@
> +/*
> + * relocate - common relocation function for ARM64 U-Boot
> + *
> + * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
This is obviously derived from arch/arm/lib/relocate.S, but I see no
attribution or retained copyright notice.
> +#ifdef __ASSEMBLY__
> +#define _AC(X,Y) X
> +#define _AT(T,X) X
> +#else
> +#define __AC(X,Y) (X##Y)
> +#define _AC(X,Y) __AC(X,Y)
> +#define _AT(T,X) ((T)(X))
> +#endif
> +
> +#define UL(x) _AC(x, UL)
This needs a code comment, better names, and should be moved to a more
common place.
Where do you use _AT?
> diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h
> index ff13f36..70be196 100644
> --- a/arch/arm/include/asm/macro.h
> +++ b/arch/arm/include/asm/macro.h
> @@ -54,5 +54,31 @@
> bcs 1b
> .endm
>
> +#ifdef CONFIG_ARMV8
> +/*
> + * Register aliases.
> + */
> +lr .req x30 // link register
> +
> +/*
> + * Stack pushing/popping (register pairs only).
> + * Equivalent to store decrement before,
> + * load increment after.
> + */
> +.macro push, xreg1, xreg2
> + stp \xreg1, \xreg2, [sp, #-16]!
> +.endm
> +
> +.macro pop, xreg1, xreg2
> + ldp \xreg1, \xreg2, [sp], #16
> +.endm
More uncredited and license-incompatible Linux copying (the macros
themselves might not be copyrightable, but the comments are...).
> diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h
> index c412486..0da38cb 100644
> --- a/arch/arm/include/asm/posix_types.h
> +++ b/arch/arm/include/asm/posix_types.h
> @@ -19,6 +19,8 @@
> * assume GCC is being used.
> */
>
> +#ifndef CONFIG_ARMV8
You need to include config.h first. For example, the warnings in
lib/hashtable.c are due to picking up the 32-bit definition of
__kernel_size_t.
You should be considering these warnings to be errors.
> typedef unsigned short __kernel_dev_t;
> typedef unsigned long __kernel_ino_t;
> typedef unsigned short __kernel_mode_t;
> @@ -44,6 +46,35 @@ typedef unsigned int __kernel_gid32_t;
> typedef unsigned short __kernel_old_uid_t;
> typedef unsigned short __kernel_old_gid_t;
>
> +#else /* CONFIG_ARMV8 */
> +
> +typedef unsigned short __kernel_dev_t;
> +typedef unsigned long __kernel_ino_t;
> +typedef unsigned short __kernel_mode_t;
> +typedef unsigned short __kernel_nlink_t;
> +typedef long __kernel_off_t;
> +typedef int __kernel_pid_t;
> +typedef unsigned short __kernel_ipc_pid_t;
> +typedef unsigned short __kernel_uid_t;
> +typedef unsigned short __kernel_gid_t;
> +typedef unsigned long __kernel_size_t;
> +typedef long __kernel_ssize_t;
> +typedef long __kernel_ptrdiff_t;
> +typedef long __kernel_time_t;
> +typedef long __kernel_suseconds_t;
> +typedef long __kernel_clock_t;
> +typedef long __kernel_daddr_t;
> +typedef char * __kernel_caddr_t;
> +typedef unsigned short __kernel_uid16_t;
> +typedef unsigned short __kernel_gid16_t;
> +typedef unsigned int __kernel_uid32_t;
> +typedef unsigned int __kernel_gid32_t;
> +
> +typedef __kernel_uid_t __kernel_old_uid_t;
> +typedef __kernel_gid_t __kernel_old_gid_t;
> +
> +#endif /* CONFIG_ARMV8 */
Most of these types do not need to be different between 32 and 64 bit
(FWIW, I find it pretty obnoxious that GCC insists on "unsigned int" for
%zu on 32-bit, rather than "unsigned long").
Also please use positive logic for if/else -- that is, use
"ifdef/else/endif" rather than "ifndef/else/endif".
> iff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
> index 71dc049..128dd3e 100644
> --- a/arch/arm/include/asm/types.h
> +++ b/arch/arm/include/asm/types.h
> @@ -18,8 +18,13 @@ typedef __signed__ int __s32;
> typedef unsigned int __u32;
>
> #if defined(__GNUC__)
> +#ifndef CONFIG_ARMV8
> __extension__ typedef __signed__ long long __s64;
> __extension__ typedef unsigned long long __u64;
> +#else /* CONFIG_ARMV8 */
> +__extension__ typedef __signed__ long __s64;
> +__extension__ typedef unsigned long __u64;
> +#endif /* CONFIG_ARMV8 */
> #endif
Please just always use long long here. It makes it easier to use u64 in
printf().
> diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h
> index 44593a8..a051e97 100644
> --- a/arch/arm/include/asm/unaligned.h
> +++ b/arch/arm/include/asm/unaligned.h
> @@ -8,6 +8,8 @@
> /*
> * Select endianness
> */
> +#ifndef CONFIG_ARMV8
> +
> #ifndef __ARMEB__
> #define get_unaligned __get_unaligned_le
> #define put_unaligned __put_unaligned_le
> @@ -16,4 +18,16 @@
> #define put_unaligned __put_unaligned_be
> #endif
>
> +#else /* CONFIG_ARMV8 */
> +
> +#ifndef __AARCH64EB__
Can you use __BYTE_ORDER__ instead so that 32/64 becomes irrelevant?
Likewise elsewhere.
> diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c
> index 8fb1765..10676f1 100644
> --- a/examples/standalone/stubs.c
> +++ b/examples/standalone/stubs.c
> @@ -39,6 +39,7 @@ gd_t *global_data;
> " bctr\n" \
> : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r11");
> #elif defined(CONFIG_ARM)
> +#ifndef CONFIG_ARMV8
CONFIG_ARM64, and use positive logic for if/else
> /*
> * r8 holds the pointer to the global_data, ip is a call-clobbered
> * register
> @@ -50,6 +51,20 @@ gd_t *global_data;
> " ldr ip, [r8, %0]\n" \
> " ldr pc, [ip, %1]\n" \
> : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "ip");
> +#else
> +/*
> + * x18 holds the pointer to the global_data, x9 is a call-clobbered
> + * register
> + */
> +#define EXPORT_FUNC(x) \
> + asm volatile ( \
> +" .globl " #x "\n" \
> +#x ":\n" \
> +" ldr x9, [x18, %0]\n" \
> +" ldr x9, [x9, %1]\n" \
> +" br x9\n" \
> + : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "x19");
> +#endif
Clobber should be x9, not x19.
-Scott
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 1/4] core support of arm64
2013-09-06 20:31 ` Scott Wood
@ 2013-09-07 14:56 ` FengHua
2013-09-09 17:19 ` Scott Wood
0 siblings, 1 reply; 18+ messages in thread
From: FengHua @ 2013-09-07 14:56 UTC (permalink / raw)
To: u-boot
Fisrt, thank scott for checking the patch.
> -----????-----
> ???: "Scott Wood" <scottwood@freescale.com>
> ????: 2013?9?7? ???
> ???: fenghua at phytium.com.cn
> ??: u-boot at lists.denx.de, trini at ti.com
> ??: Re: [U-Boot] [PATCH v5 1/4] core support of arm64
>
> On Sat, 2013-08-24 at 09:06 +0800, fenghua at phytium.com.cn wrote:
> > From: David Feng <fenghua@phytium.com.cn>
> >
> > Signed-off-by: David Feng <fenghua@phytium.com.cn>
> > ---
> > Changeds for v4:
> > - Replace __ARMEB__ with __AARCH64EB__ in byteorder.h and unaligned.h,
> > gcc for aarch64 use __AARCH64EB__ and __AARCH64EL__ to identify endian.
> > - Some modification to README.armv8
> >
> > arch/arm/config.mk | 4 +
> > arch/arm/cpu/armv8/Makefile | 56 ++++++
> > arch/arm/cpu/armv8/cache.S | 145 +++++++++++++++
> > arch/arm/cpu/armv8/cache_v8.c | 291 +++++++++++++++++++++++++++++++
> > arch/arm/cpu/armv8/config.mk | 31 ++++
> > arch/arm/cpu/armv8/cpu.c | 68 ++++++++
> > arch/arm/cpu/armv8/crt0.S | 130 ++++++++++++++
> > arch/arm/cpu/armv8/exceptions.S | 182 +++++++++++++++++++
> > arch/arm/cpu/armv8/interrupts.c | 116 ++++++++++++
> > arch/arm/cpu/armv8/relocate.S | 71 ++++++++
> > arch/arm/cpu/armv8/start.S | 200 +++++++++++++++++++++
> > arch/arm/cpu/armv8/timer.c | 95 ++++++++++
> > arch/arm/cpu/armv8/tlb.S | 38 ++++
> > arch/arm/cpu/armv8/u-boot.lds | 83 +++++++++
>
> Subject says "arm64", files say "armv8".
>
> Some of these, such as relocate.S, probably are not going to be
> armv8-specific but just arm64-specific.
>
> > arch/arm/include/asm/arch-armv8/armv8.h | 44 +++++
> > arch/arm/include/asm/arch-armv8/gpio.h | 26 +++
> > arch/arm/include/asm/arch-armv8/mmu.h | 117 +++++++++++++
> > arch/arm/include/asm/byteorder.h | 12 ++
> > arch/arm/include/asm/config.h | 10 ++
> > arch/arm/include/asm/global_data.h | 6 +-
> > arch/arm/include/asm/io.h | 12 +-
> > arch/arm/include/asm/macro.h | 26 +++
> > arch/arm/include/asm/posix_types.h | 31 ++++
> > arch/arm/include/asm/proc-armv/ptrace.h | 38 ++++
> > arch/arm/include/asm/proc-armv/system.h | 58 +++++-
> > arch/arm/include/asm/types.h | 14 ++
> > arch/arm/include/asm/u-boot.h | 4 +
> > arch/arm/include/asm/unaligned.h | 14 ++
> > arch/arm/lib/Makefile | 8 +
> > arch/arm/lib/board.c | 18 ++
> > arch/arm/lib/bootm.c | 16 ++
> > common/image.c | 1 +
> > doc/README.armv8 | 14 ++
> > examples/standalone/stubs.c | 15 ++
> > include/image.h | 1 +
> > 35 files changed, 1987 insertions(+), 8 deletions(-)
> > create mode 100644 arch/arm/cpu/armv8/Makefile
> > create mode 100644 arch/arm/cpu/armv8/cache.S
> > create mode 100644 arch/arm/cpu/armv8/cache_v8.c
> > create mode 100644 arch/arm/cpu/armv8/config.mk
> > create mode 100644 arch/arm/cpu/armv8/cpu.c
> > create mode 100644 arch/arm/cpu/armv8/crt0.S
> > create mode 100644 arch/arm/cpu/armv8/exceptions.S
> > create mode 100644 arch/arm/cpu/armv8/interrupts.c
> > create mode 100644 arch/arm/cpu/armv8/relocate.S
> > create mode 100644 arch/arm/cpu/armv8/start.S
> > create mode 100644 arch/arm/cpu/armv8/timer.c
> > create mode 100644 arch/arm/cpu/armv8/tlb.S
> > create mode 100644 arch/arm/cpu/armv8/u-boot.lds
> > create mode 100644 arch/arm/include/asm/arch-armv8/armv8.h
> > create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
> > create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
> > create mode 100644 doc/README.armv8
> >
> > diff --git a/arch/arm/config.mk b/arch/arm/config.mk
> > index ce3903b..f1c6a7b 100644
> > --- a/arch/arm/config.mk
> > +++ b/arch/arm/config.mk
> > @@ -74,7 +74,9 @@ endif
> > endif
> >
> > # needed for relocation
> > +ifndef CONFIG_ARMV8
> > LDFLAGS_u-boot += -pie
> > +endif
>
> CONFIG_ARM64 (until we fix this, of course)
>
> > #
> > # FIXME: binutils versions < 2.22 have a bug in the assembler where
> > @@ -95,6 +97,8 @@ endif
> > endif
> >
> > # check that only R_ARM_RELATIVE relocations are generated
> > +ifndef CONFIG_ARMV8
> > ifneq ($(CONFIG_SPL_BUILD),y)
> > ALL-y += checkarmreloc
> > endif
> > +endif
>
> ARM64, though I've got a patch coming that will make the check work with
> arm64.
>
> Likewise elsewhere -- most if not all of the CONFIG_ARMV8 uses should be
> CONFIG_ARM64.
>
Actually, the naming is so confusing. The directory's name is armv8,
but it only represents aarch64 here. So, whether CONFIG_ARMV8 or CONFIG_ARM64 should be used
is difficult to make decision.
> > +/*
> > + * void __asm_flush_dcache_level(level)
> > + *
> > + * clean and invalidate one level cache.
> > + *
> > + * x0: cache level
> > + * x1~x9: clobbered
> > + */
> > +ENTRY(__asm_flush_dcache_level)
>
> Why the leading underscores?
>
Is there any convention with underscores? I just know the underscore represent that the function is best not be called directly.
> > +/* to activate the MMU we need to set up virtual memory */
> > +static inline void mmu_setup(void)
> > +{
> > + int i, j;
> > + bd_t *bd = gd->bd;
> > + static int table_initialized = 0;
> > +
> > + if (!table_initialized) {
>
> Instead of this, have separate mmu_setup() and mmu_enable().
>
> > + /* Setup an identity-mapping for all spaces */
> > + for (i = 0; i < (PAGE_SIZE >> 3); i++)
> > + set_pgtable_section(i, MT_DEVICE_nGnRnE);
> > +
> > + /* Setup an identity-mapping for all RAM space */
> > + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
> > + debug("%s: bank: %d\n", __func__, i);
> > + for (j = bd->bi_dram[i].start >> SECTION_SHIFT;
> > + j < (bd->bi_dram[i].start + bd->bi_dram[i].size) >> SECTION_SHIFT;
> > + j++) {
> > + set_pgtable_section(i, MT_NORMAL);
> > + }
> > + }
>
> This is odd alignment... Why are the second and third instances of "j"
> lined up with "bd->..." rather than with the first "j"?
It's a bug, I will fix it.
>
> > +#endif /* CONFIG_SYS_DCACHE_OFF */
> > +
> > +#ifndef CONFIG_SYS_ICACHE_OFF
>
> This isn't new to this patch, but I'd like to point out that the whole
> "CONFIG" versus "CONFIG_SYS" thing is widely misused and should probably
> just go away when we kconfigize.
>
> > +/*
> > + * Stub implementations for outer cache operations
> > + */
> > +void __v8_outer_cache_enable(void) {}
> > +void v8_outer_cache_enable(void)
> > + __attribute__((weak, alias("__v8_outer_cache_enable")));
> > +
> > +void __v8_outer_cache_disable(void) {}
> > +void v8_outer_cache_disable(void)
> > + __attribute__((weak, alias("__v8_outer_cache_disable")));
> > +
> > +void __v8_outer_cache_flush_all(void) {}
> > +void v8_outer_cache_flush_all(void)
> > + __attribute__((weak, alias("__v8_outer_cache_flush_all")));
> > +
> > +void __v8_outer_cache_inval_all(void) {}
> > +void v8_outer_cache_inval_all(void)
> > + __attribute__((weak, alias("__v8_outer_cache_inval_all")));
> > +
> > +void __v8_outer_cache_flush_range(u64 start, u64 end) {}
> > +void v8_outer_cache_flush_range(u64 start, u64 end)
> > + __attribute__((weak, alias("__v8_outer_cache_flush_range")));
> > +
> > +void __v8_outer_cache_inval_range(u64 start, u64 end) {}
> > +void v8_outer_cache_inval_range(u64 start, u64 end)
> > + __attribute__((weak, alias("__v8_outer_cache_inval_range")));
>
> What level do you anticipate these being overriden at? Individual
> chips? Why?
It's socs. I don't know how the armv8 processor would like to be. It's just derived from __v7_outer_cache*.
>
> > diff --git a/arch/arm/cpu/armv8/config.mk b/arch/arm/cpu/armv8/config.mk
> > new file mode 100644
> > index 0000000..aae2170
> > --- /dev/null
> > +++ b/arch/arm/cpu/armv8/config.mk
> > @@ -0,0 +1,31 @@
> > +#
> > +# Copyright (c) 2013 FengHua <fenghua@phytium.com.cn>
> > +#
> > +# See file CREDITS for list of people who contributed to this
> > +# project.
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation; either version 2 of
> > +# the License, or (at your option) any later version.
> > +#
> > +# This program is distributed in the hope that it will be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write to the Free Software
> > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > +# MA 02111-1307 USA
> > +#
> > +PLATFORM_RELFLAGS += -fno-common -ffixed-x18
>
> Is -ffixed-x18 necessary, or will GCC do the right thing when it sees
> that x18 has been declared as a register variable?
>
I am not sure and will check it.
> > diff --git a/arch/arm/cpu/armv8/exceptions.S b/arch/arm/cpu/armv8/exceptions.S
> > new file mode 100644
> > index 0000000..c64a326
> > --- /dev/null
> > +++ b/arch/arm/cpu/armv8/exceptions.S
> > @@ -0,0 +1,182 @@
> > +/*
> > + * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
>
> I'm skeptical that you actually rewrote this from scratch (e.g. same
> registers are used in some places where there's no reason to pick any
> particular register, overall structure very similar, etc). It looks
> like you just changed the comments and names up a bit.
>
> Any code that you did not write *from scratch* must be identified, with
> copyrights retained, and can only be used if it can be licensed GPLv2+
> (unless Tom/Wolfgang say they'll accept v2-only code from Linux in this
> case).
>
> > +void show_regs (struct pt_regs *regs)
> > +{
> > + int i;
> > +
> > + printf("PC is at %lx\n", regs->pc);
> > + printf("LR is at %lx\n", regs->regs[30]);
> > + printf("PSTATE: %08lx\n", regs->pstate);
> > + printf("SP : %lx\n", regs->sp);
> > + for (i = 29; i >= 0; i--) {
> > + printf("x%-2d: %016lx ", i, regs->regs[i]);
> > + if (i % 2 == 0)
> > + printf("\n");
> > + }
> > + printf("\n");
> > +}
>
> This is almost identical to the Linux code, yet I don't see any
> attribution (and the license is incompatible).
>
I will rewrite it.
> > diff --git a/arch/arm/cpu/armv8/relocate.S b/arch/arm/cpu/armv8/relocate.S
> > new file mode 100644
> > index 0000000..87b5ef0
> > --- /dev/null
> > +++ b/arch/arm/cpu/armv8/relocate.S
> > @@ -0,0 +1,71 @@
> > +/*
> > + * relocate - common relocation function for ARM64 U-Boot
> > + *
> > + * Copyright (c) 2013 David Feng <fenghua@phytium.com.cn>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
>
> This is obviously derived from arch/arm/lib/relocate.S, but I see no
> attribution or retained copyright notice.
>
> > +#ifdef __ASSEMBLY__
> > +#define _AC(X,Y) X
> > +#define _AT(T,X) X
> > +#else
> > +#define __AC(X,Y) (X##Y)
> > +#define _AC(X,Y) __AC(X,Y)
> > +#define _AT(T,X) ((T)(X))
> > +#endif
> > +
> > +#define UL(x) _AC(x, UL)
>
> This needs a code comment, better names, and should be moved to a more
> common place.
>
> Where do you use _AT?
>
> > diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h
> > index ff13f36..70be196 100644
> > --- a/arch/arm/include/asm/macro.h
> > +++ b/arch/arm/include/asm/macro.h
> > @@ -54,5 +54,31 @@
> > bcs 1b
> > .endm
> >
> > +#ifdef CONFIG_ARMV8
> > +/*
> > + * Register aliases.
> > + */
> > +lr .req x30 // link register
> > +
> > +/*
> > + * Stack pushing/popping (register pairs only).
> > + * Equivalent to store decrement before,
> > + * load increment after.
> > + */
> > +.macro push, xreg1, xreg2
> > + stp \xreg1, \xreg2, [sp, #-16]!
> > +.endm
> > +
> > +.macro pop, xreg1, xreg2
> > + ldp \xreg1, \xreg2, [sp], #16
> > +.endm
>
> More uncredited and license-incompatible Linux copying (the macros
> themselves might not be copyrightable, but the comments are...).
>
I will modify the comments.
> > diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h
> > index c412486..0da38cb 100644
> > --- a/arch/arm/include/asm/posix_types.h
> > +++ b/arch/arm/include/asm/posix_types.h
> > @@ -19,6 +19,8 @@
> > * assume GCC is being used.
> > */
> >
> > +#ifndef CONFIG_ARMV8
>
> You need to include config.h first. For example, the warnings in
> lib/hashtable.c are due to picking up the 32-bit definition of
> __kernel_size_t.
Maybe, it is better that config.h is included in hashtable.c
>
> You should be considering these warnings to be errors.
>
I will remove all the warnings.
> > typedef unsigned short __kernel_dev_t;
> > typedef unsigned long __kernel_ino_t;
> > typedef unsigned short __kernel_mode_t;
> > @@ -44,6 +46,35 @@ typedef unsigned int __kernel_gid32_t;
> > typedef unsigned short __kernel_old_uid_t;
> > typedef unsigned short __kernel_old_gid_t;
> >
> > +#else /* CONFIG_ARMV8 */
> > +
> > +typedef unsigned short __kernel_dev_t;
> > +typedef unsigned long __kernel_ino_t;
> > +typedef unsigned short __kernel_mode_t;
> > +typedef unsigned short __kernel_nlink_t;
> > +typedef long __kernel_off_t;
> > +typedef int __kernel_pid_t;
> > +typedef unsigned short __kernel_ipc_pid_t;
> > +typedef unsigned short __kernel_uid_t;
> > +typedef unsigned short __kernel_gid_t;
> > +typedef unsigned long __kernel_size_t;
> > +typedef long __kernel_ssize_t;
> > +typedef long __kernel_ptrdiff_t;
> > +typedef long __kernel_time_t;
> > +typedef long __kernel_suseconds_t;
> > +typedef long __kernel_clock_t;
> > +typedef long __kernel_daddr_t;
> > +typedef char * __kernel_caddr_t;
> > +typedef unsigned short __kernel_uid16_t;
> > +typedef unsigned short __kernel_gid16_t;
> > +typedef unsigned int __kernel_uid32_t;
> > +typedef unsigned int __kernel_gid32_t;
> > +
> > +typedef __kernel_uid_t __kernel_old_uid_t;
> > +typedef __kernel_gid_t __kernel_old_gid_t;
> > +
> > +#endif /* CONFIG_ARMV8 */
>
> Most of these types do not need to be different between 32 and 64 bit
> (FWIW, I find it pretty obnoxious that GCC insists on "unsigned int" for
> %zu on 32-bit, rather than "unsigned long").
>
> Also please use positive logic for if/else -- that is, use
> "ifdef/else/endif" rather than "ifndef/else/endif".
>
> > iff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
> > index 71dc049..128dd3e 100644
> > --- a/arch/arm/include/asm/types.h
> > +++ b/arch/arm/include/asm/types.h
> > @@ -18,8 +18,13 @@ typedef __signed__ int __s32;
> > typedef unsigned int __u32;
> >
> > #if defined(__GNUC__)
> > +#ifndef CONFIG_ARMV8
> > __extension__ typedef __signed__ long long __s64;
> > __extension__ typedef unsigned long long __u64;
> > +#else /* CONFIG_ARMV8 */
> > +__extension__ typedef __signed__ long __s64;
> > +__extension__ typedef unsigned long __u64;
> > +#endif /* CONFIG_ARMV8 */
> > #endif
>
> Please just always use long long here. It makes it easier to use u64 in
> printf().
>
That's right.
> > diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h
> > index 44593a8..a051e97 100644
> > --- a/arch/arm/include/asm/unaligned.h
> > +++ b/arch/arm/include/asm/unaligned.h
> > @@ -8,6 +8,8 @@
> > /*
> > * Select endianness
> > */
> > +#ifndef CONFIG_ARMV8
> > +
> > #ifndef __ARMEB__
> > #define get_unaligned __get_unaligned_le
> > #define put_unaligned __put_unaligned_le
> > @@ -16,4 +18,16 @@
> > #define put_unaligned __put_unaligned_be
> > #endif
> >
> > +#else /* CONFIG_ARMV8 */
> > +
> > +#ifndef __AARCH64EB__
>
> Can you use __BYTE_ORDER__ instead so that 32/64 becomes irrelevant?
> Likewise elsewhere.
>
__ARMEB__ is used in a few files, we can replace it with __BYTE_ORDER here.
other file has no relationship with armv8, I will keep it.
> > diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c
> > index 8fb1765..10676f1 100644
> > --- a/examples/standalone/stubs.c
> > +++ b/examples/standalone/stubs.c
> > @@ -39,6 +39,7 @@ gd_t *global_data;
> > " bctr\n" \
> > : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r11");
> > #elif defined(CONFIG_ARM)
> > +#ifndef CONFIG_ARMV8
>
> CONFIG_ARM64, and use positive logic for if/else
>
> > /*
> > * r8 holds the pointer to the global_data, ip is a call-clobbered
> > * register
> > @@ -50,6 +51,20 @@ gd_t *global_data;
> > " ldr ip, [r8, %0]\n" \
> > " ldr pc, [ip, %1]\n" \
> > : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "ip");
> > +#else
> > +/*
> > + * x18 holds the pointer to the global_data, x9 is a call-clobbered
> > + * register
> > + */
> > +#define EXPORT_FUNC(x) \
> > + asm volatile ( \
> > +" .globl " #x "\n" \
> > +#x ":\n" \
> > +" ldr x9, [x18, %0]\n" \
> > +" ldr x9, [x9, %1]\n" \
> > +" br x9\n" \
> > + : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "x19");
> > +#endif
>
> Clobber should be x9, not x19.
Sorry, It's a neglect.
>
> -Scott
>
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 1/4] core support of arm64
2013-09-07 14:56 ` FengHua
@ 2013-09-09 17:19 ` Scott Wood
2013-09-11 14:13 ` FengHua
0 siblings, 1 reply; 18+ messages in thread
From: Scott Wood @ 2013-09-09 17:19 UTC (permalink / raw)
To: u-boot
On Sat, 2013-09-07 at 22:56 +0800, FengHua wrote:
> Fisrt, thank scott for checking the patch.
>
> > -----????-----
> > ???: "Scott Wood" <scottwood@freescale.com>
> > ????: 2013?9?7? ???
> > ???: fenghua at phytium.com.cn
> > ??: u-boot at lists.denx.de, trini at ti.com
> > ??: Re: [U-Boot] [PATCH v5 1/4] core support of arm64
> >
> > On Sat, 2013-08-24 at 09:06 +0800, fenghua at phytium.com.cn wrote:
> > > From: David Feng <fenghua@phytium.com.cn>
> > >
> > > Signed-off-by: David Feng <fenghua@phytium.com.cn>
> > > ---
> > > Changeds for v4:
> > > - Replace __ARMEB__ with __AARCH64EB__ in byteorder.h and unaligned.h,
> > > gcc for aarch64 use __AARCH64EB__ and __AARCH64EL__ to identify endian.
> > > - Some modification to README.armv8
> > >
> > > arch/arm/config.mk | 4 +
> > > arch/arm/cpu/armv8/Makefile | 56 ++++++
> > > arch/arm/cpu/armv8/cache.S | 145 +++++++++++++++
> > > arch/arm/cpu/armv8/cache_v8.c | 291 +++++++++++++++++++++++++++++++
> > > arch/arm/cpu/armv8/config.mk | 31 ++++
> > > arch/arm/cpu/armv8/cpu.c | 68 ++++++++
> > > arch/arm/cpu/armv8/crt0.S | 130 ++++++++++++++
> > > arch/arm/cpu/armv8/exceptions.S | 182 +++++++++++++++++++
> > > arch/arm/cpu/armv8/interrupts.c | 116 ++++++++++++
> > > arch/arm/cpu/armv8/relocate.S | 71 ++++++++
> > > arch/arm/cpu/armv8/start.S | 200 +++++++++++++++++++++
> > > arch/arm/cpu/armv8/timer.c | 95 ++++++++++
> > > arch/arm/cpu/armv8/tlb.S | 38 ++++
> > > arch/arm/cpu/armv8/u-boot.lds | 83 +++++++++
> >
> > Subject says "arm64", files say "armv8".
> >
> > Some of these, such as relocate.S, probably are not going to be
> > armv8-specific but just arm64-specific.
> >
> > > arch/arm/include/asm/arch-armv8/armv8.h | 44 +++++
> > > arch/arm/include/asm/arch-armv8/gpio.h | 26 +++
> > > arch/arm/include/asm/arch-armv8/mmu.h | 117 +++++++++++++
> > > arch/arm/include/asm/byteorder.h | 12 ++
> > > arch/arm/include/asm/config.h | 10 ++
> > > arch/arm/include/asm/global_data.h | 6 +-
> > > arch/arm/include/asm/io.h | 12 +-
> > > arch/arm/include/asm/macro.h | 26 +++
> > > arch/arm/include/asm/posix_types.h | 31 ++++
> > > arch/arm/include/asm/proc-armv/ptrace.h | 38 ++++
> > > arch/arm/include/asm/proc-armv/system.h | 58 +++++-
> > > arch/arm/include/asm/types.h | 14 ++
> > > arch/arm/include/asm/u-boot.h | 4 +
> > > arch/arm/include/asm/unaligned.h | 14 ++
> > > arch/arm/lib/Makefile | 8 +
> > > arch/arm/lib/board.c | 18 ++
> > > arch/arm/lib/bootm.c | 16 ++
> > > common/image.c | 1 +
> > > doc/README.armv8 | 14 ++
> > > examples/standalone/stubs.c | 15 ++
> > > include/image.h | 1 +
> > > 35 files changed, 1987 insertions(+), 8 deletions(-)
> > > create mode 100644 arch/arm/cpu/armv8/Makefile
> > > create mode 100644 arch/arm/cpu/armv8/cache.S
> > > create mode 100644 arch/arm/cpu/armv8/cache_v8.c
> > > create mode 100644 arch/arm/cpu/armv8/config.mk
> > > create mode 100644 arch/arm/cpu/armv8/cpu.c
> > > create mode 100644 arch/arm/cpu/armv8/crt0.S
> > > create mode 100644 arch/arm/cpu/armv8/exceptions.S
> > > create mode 100644 arch/arm/cpu/armv8/interrupts.c
> > > create mode 100644 arch/arm/cpu/armv8/relocate.S
> > > create mode 100644 arch/arm/cpu/armv8/start.S
> > > create mode 100644 arch/arm/cpu/armv8/timer.c
> > > create mode 100644 arch/arm/cpu/armv8/tlb.S
> > > create mode 100644 arch/arm/cpu/armv8/u-boot.lds
> > > create mode 100644 arch/arm/include/asm/arch-armv8/armv8.h
> > > create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
> > > create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
> > > create mode 100644 doc/README.armv8
> > >
> > > diff --git a/arch/arm/config.mk b/arch/arm/config.mk
> > > index ce3903b..f1c6a7b 100644
> > > --- a/arch/arm/config.mk
> > > +++ b/arch/arm/config.mk
> > > @@ -74,7 +74,9 @@ endif
> > > endif
> > >
> > > # needed for relocation
> > > +ifndef CONFIG_ARMV8
> > > LDFLAGS_u-boot += -pie
> > > +endif
> >
> > CONFIG_ARM64 (until we fix this, of course)
> >
> > > #
> > > # FIXME: binutils versions < 2.22 have a bug in the assembler where
> > > @@ -95,6 +97,8 @@ endif
> > > endif
> > >
> > > # check that only R_ARM_RELATIVE relocations are generated
> > > +ifndef CONFIG_ARMV8
> > > ifneq ($(CONFIG_SPL_BUILD),y)
> > > ALL-y += checkarmreloc
> > > endif
> > > +endif
> >
> > ARM64, though I've got a patch coming that will make the check work with
> > arm64.
> >
> > Likewise elsewhere -- most if not all of the CONFIG_ARMV8 uses should be
> > CONFIG_ARM64.
> >
>
> Actually, the naming is so confusing. The directory's name is armv8,
> but it only represents aarch64 here. So, whether CONFIG_ARMV8 or CONFIG_ARM64 should be used
> is difficult to make decision.
Files that are about 64-bit rather than armv8 should not go in the armv8
directory. E.g. relocate should be arch/arm/lib/relocate64.S.
> > > +/*
> > > + * void __asm_flush_dcache_level(level)
> > > + *
> > > + * clean and invalidate one level cache.
> > > + *
> > > + * x0: cache level
> > > + * x1~x9: clobbered
> > > + */
> > > +ENTRY(__asm_flush_dcache_level)
> >
> > Why the leading underscores?
> >
>
> Is there any convention with underscores? I just know the underscore represent that the function is best not be called directly.
Sometimes that's done when there are multiple versions of a function,
but it's bad practice since you're in a reserved namespace (especially
if you go and do the same thing in a normal userspace program). In this
case there isn't even a non-underscore version, so it's just gratuitous.
> > > +/*
> > > + * Stub implementations for outer cache operations
> > > + */
> > > +void __v8_outer_cache_enable(void) {}
> > > +void v8_outer_cache_enable(void)
> > > + __attribute__((weak, alias("__v8_outer_cache_enable")));
> > > +
> > > +void __v8_outer_cache_disable(void) {}
> > > +void v8_outer_cache_disable(void)
> > > + __attribute__((weak, alias("__v8_outer_cache_disable")));
> > > +
> > > +void __v8_outer_cache_flush_all(void) {}
> > > +void v8_outer_cache_flush_all(void)
> > > + __attribute__((weak, alias("__v8_outer_cache_flush_all")));
> > > +
> > > +void __v8_outer_cache_inval_all(void) {}
> > > +void v8_outer_cache_inval_all(void)
> > > + __attribute__((weak, alias("__v8_outer_cache_inval_all")));
> > > +
> > > +void __v8_outer_cache_flush_range(u64 start, u64 end) {}
> > > +void v8_outer_cache_flush_range(u64 start, u64 end)
> > > + __attribute__((weak, alias("__v8_outer_cache_flush_range")));
> > > +
> > > +void __v8_outer_cache_inval_range(u64 start, u64 end) {}
> > > +void v8_outer_cache_inval_range(u64 start, u64 end)
> > > + __attribute__((weak, alias("__v8_outer_cache_inval_range")));
> >
> > What level do you anticipate these being overriden at? Individual
> > chips? Why?
> It's socs. I don't know how the armv8 processor would like to be. It's just derived from __v7_outer_cache*.
Is this for flushing caches that are outside the core? On powerpc you
could do that with architected instructions for a range flush -- is that
not the case with ARM? Do the IC/DC instructions not operate on caches
outside the core?
> > > diff --git a/arch/arm/cpu/armv8/config.mk b/arch/arm/cpu/armv8/config.mk
> > > new file mode 100644
> > > index 0000000..aae2170
> > > --- /dev/null
> > > +++ b/arch/arm/cpu/armv8/config.mk
> > > @@ -0,0 +1,31 @@
> > > +#
> > > +# Copyright (c) 2013 FengHua <fenghua@phytium.com.cn>
> > > +#
> > > +# See file CREDITS for list of people who contributed to this
> > > +# project.
> > > +#
> > > +# This program is free software; you can redistribute it and/or
> > > +# modify it under the terms of the GNU General Public License as
> > > +# published by the Free Software Foundation; either version 2 of
> > > +# the License, or (at your option) any later version.
> > > +#
> > > +# This program is distributed in the hope that it will be useful,
> > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > +# GNU General Public License for more details.
> > > +#
> > > +# You should have received a copy of the GNU General Public License
> > > +# along with this program; if not, write to the Free Software
> > > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > > +# MA 02111-1307 USA
> > > +#
> > > +PLATFORM_RELFLAGS += -fno-common -ffixed-x18
> >
> > Is -ffixed-x18 necessary, or will GCC do the right thing when it sees
> > that x18 has been declared as a register variable?
> >
> I am not sure and will check it.
GCC complains without --fixed-x18 because it views it as a volatile
register. The ABI says this about it: "The Platform Register. If the
platform ABI needs a dedicated register, this is it. Otherwise a
temporary register."
> > > diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h
> > > index ff13f36..70be196 100644
> > > --- a/arch/arm/include/asm/macro.h
> > > +++ b/arch/arm/include/asm/macro.h
> > > @@ -54,5 +54,31 @@
> > > bcs 1b
> > > .endm
> > >
> > > +#ifdef CONFIG_ARMV8
> > > +/*
> > > + * Register aliases.
> > > + */
> > > +lr .req x30 // link register
> > > +
> > > +/*
> > > + * Stack pushing/popping (register pairs only).
> > > + * Equivalent to store decrement before,
> > > + * load increment after.
> > > + */
> > > +.macro push, xreg1, xreg2
> > > + stp \xreg1, \xreg2, [sp, #-16]!
> > > +.endm
> > > +
> > > +.macro pop, xreg1, xreg2
> > > + ldp \xreg1, \xreg2, [sp], #16
> > > +.endm
> >
> > More uncredited and license-incompatible Linux copying (the macros
> > themselves might not be copyrightable, but the comments are...).
> >
> I will modify the comments.
Please be aware that modifying the comments is generally not an
acceptable alternative to rewriting from scratch. The non-comment
portion of the above quote might not be regarded as copyrightable, but
we're not lawyers and shouldn't rely on such things if we can avoid it.
> > > diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h
> > > index c412486..0da38cb 100644
> > > --- a/arch/arm/include/asm/posix_types.h
> > > +++ b/arch/arm/include/asm/posix_types.h
> > > @@ -19,6 +19,8 @@
> > > * assume GCC is being used.
> > > */
> > >
> > > +#ifndef CONFIG_ARMV8
> >
> > You need to include config.h first. For example, the warnings in
> > lib/hashtable.c are due to picking up the 32-bit definition of
> > __kernel_size_t.
>
> Maybe, it is better that config.h is included in hashtable.c
No. If you use a config symbol in this file, then this file should
include config.h. Otherwise we'll silently break on the next file that
has a similar problem.
-Scott
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 1/4] core support of arm64
2013-09-09 17:19 ` Scott Wood
@ 2013-09-11 14:13 ` FengHua
2013-09-12 0:16 ` Scott Wood
0 siblings, 1 reply; 18+ messages in thread
From: FengHua @ 2013-09-11 14:13 UTC (permalink / raw)
To: u-boot
> -----????-----
> ???: "Scott Wood" <scottwood@freescale.com>
> ????: 2013?9?10? ???
> ???: FengHua <fenghua@phytium.com.cn>
> ??: u-boot at lists.denx.de, trini at ti.com
> ??: Re: Re: [U-Boot] [PATCH v5 1/4] core support of arm64
>
> On Sat, 2013-09-07 at 22:56 +0800, FengHua wrote:
> > Fisrt, thank scott for checking the patch.
> >
> > > -----????-----
> > > ???: "Scott Wood" <scottwood@freescale.com>
> > > ????: 2013?9?7? ???
> > > ???: fenghua at phytium.com.cn
> > > ??: u-boot at lists.denx.de, trini at ti.com
> > > ??: Re: [U-Boot] [PATCH v5 1/4] core support of arm64
> > >
> > > On Sat, 2013-08-24 at 09:06 +0800, fenghua at phytium.com.cn wrote:
> > > > From: David Feng <fenghua@phytium.com.cn>
> > > >
> > > > Signed-off-by: David Feng <fenghua@phytium.com.cn>
> > > > ---
> > > > Changeds for v4:
> > > > - Replace __ARMEB__ with __AARCH64EB__ in byteorder.h and unaligned.h,
> > > > gcc for aarch64 use __AARCH64EB__ and __AARCH64EL__ to identify endian.
> > > > - Some modification to README.armv8
> > > >
> > > > arch/arm/config.mk | 4 +
> > > > arch/arm/cpu/armv8/Makefile | 56 ++++++
> > > > arch/arm/cpu/armv8/cache.S | 145 +++++++++++++++
> > > > arch/arm/cpu/armv8/cache_v8.c | 291 +++++++++++++++++++++++++++++++
> > > > arch/arm/cpu/armv8/config.mk | 31 ++++
> > > > arch/arm/cpu/armv8/cpu.c | 68 ++++++++
> > > > arch/arm/cpu/armv8/crt0.S | 130 ++++++++++++++
> > > > arch/arm/cpu/armv8/exceptions.S | 182 +++++++++++++++++++
> > > > arch/arm/cpu/armv8/interrupts.c | 116 ++++++++++++
> > > > arch/arm/cpu/armv8/relocate.S | 71 ++++++++
> > > > arch/arm/cpu/armv8/start.S | 200 +++++++++++++++++++++
> > > > arch/arm/cpu/armv8/timer.c | 95 ++++++++++
> > > > arch/arm/cpu/armv8/tlb.S | 38 ++++
> > > > arch/arm/cpu/armv8/u-boot.lds | 83 +++++++++
> > >
> > > Subject says "arm64", files say "armv8".
> > >
> > > Some of these, such as relocate.S, probably are not going to be
> > > armv8-specific but just arm64-specific.
> > >
> > > > arch/arm/include/asm/arch-armv8/armv8.h | 44 +++++
> > > > arch/arm/include/asm/arch-armv8/gpio.h | 26 +++
> > > > arch/arm/include/asm/arch-armv8/mmu.h | 117 +++++++++++++
> > > > arch/arm/include/asm/byteorder.h | 12 ++
> > > > arch/arm/include/asm/config.h | 10 ++
> > > > arch/arm/include/asm/global_data.h | 6 +-
> > > > arch/arm/include/asm/io.h | 12 +-
> > > > arch/arm/include/asm/macro.h | 26 +++
> > > > arch/arm/include/asm/posix_types.h | 31 ++++
> > > > arch/arm/include/asm/proc-armv/ptrace.h | 38 ++++
> > > > arch/arm/include/asm/proc-armv/system.h | 58 +++++-
> > > > arch/arm/include/asm/types.h | 14 ++
> > > > arch/arm/include/asm/u-boot.h | 4 +
> > > > arch/arm/include/asm/unaligned.h | 14 ++
> > > > arch/arm/lib/Makefile | 8 +
> > > > arch/arm/lib/board.c | 18 ++
> > > > arch/arm/lib/bootm.c | 16 ++
> > > > common/image.c | 1 +
> > > > doc/README.armv8 | 14 ++
> > > > examples/standalone/stubs.c | 15 ++
> > > > include/image.h | 1 +
> > > > 35 files changed, 1987 insertions(+), 8 deletions(-)
> > > > create mode 100644 arch/arm/cpu/armv8/Makefile
> > > > create mode 100644 arch/arm/cpu/armv8/cache.S
> > > > create mode 100644 arch/arm/cpu/armv8/cache_v8.c
> > > > create mode 100644 arch/arm/cpu/armv8/config.mk
> > > > create mode 100644 arch/arm/cpu/armv8/cpu.c
> > > > create mode 100644 arch/arm/cpu/armv8/crt0.S
> > > > create mode 100644 arch/arm/cpu/armv8/exceptions.S
> > > > create mode 100644 arch/arm/cpu/armv8/interrupts.c
> > > > create mode 100644 arch/arm/cpu/armv8/relocate.S
> > > > create mode 100644 arch/arm/cpu/armv8/start.S
> > > > create mode 100644 arch/arm/cpu/armv8/timer.c
> > > > create mode 100644 arch/arm/cpu/armv8/tlb.S
> > > > create mode 100644 arch/arm/cpu/armv8/u-boot.lds
> > > > create mode 100644 arch/arm/include/asm/arch-armv8/armv8.h
> > > > create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
> > > > create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
> > > > create mode 100644 doc/README.armv8
> > > >
> > > > diff --git a/arch/arm/config.mk b/arch/arm/config.mk
> > > > index ce3903b..f1c6a7b 100644
> > > > --- a/arch/arm/config.mk
> > > > +++ b/arch/arm/config.mk
> > > > @@ -74,7 +74,9 @@ endif
> > > > endif
> > > >
> > > > # needed for relocation
> > > > +ifndef CONFIG_ARMV8
> > > > LDFLAGS_u-boot += -pie
> > > > +endif
> > >
> > > CONFIG_ARM64 (until we fix this, of course)
> > >
> > > > #
> > > > # FIXME: binutils versions < 2.22 have a bug in the assembler where
> > > > @@ -95,6 +97,8 @@ endif
> > > > endif
> > > >
> > > > # check that only R_ARM_RELATIVE relocations are generated
> > > > +ifndef CONFIG_ARMV8
> > > > ifneq ($(CONFIG_SPL_BUILD),y)
> > > > ALL-y += checkarmreloc
> > > > endif
> > > > +endif
> > >
> > > ARM64, though I've got a patch coming that will make the check work with
> > > arm64.
> > >
> > > Likewise elsewhere -- most if not all of the CONFIG_ARMV8 uses should be
> > > CONFIG_ARM64.
> > >
> >
> > Actually, the naming is so confusing. The directory's name is armv8,
> > but it only represents aarch64 here. So, whether CONFIG_ARMV8 or CONFIG_ARM64 should be used
> > is difficult to make decision.
>
> Files that are about 64-bit rather than armv8 should not go in the armv8
> directory. E.g. relocate should be arch/arm/lib/relocate64.S.
>
crt0.S and relocate.S both could be moved to /arm/lib/ and renamed.
Currently, I try to keep armv8 specific codes within armv8 directory
and do not mixed with original arm code. Absolutely we should did so when armv9 coming.
> > > > +/*
> > > > + * void __asm_flush_dcache_level(level)
> > > > + *
> > > > + * clean and invalidate one level cache.
> > > > + *
> > > > + * x0: cache level
> > > > + * x1~x9: clobbered
> > > > + */
> > > > +ENTRY(__asm_flush_dcache_level)
> > >
> > > Why the leading underscores?
> > >
> >
> > Is there any convention with underscores? I just know the underscore represent that the function is best not be called directly.
>
> Sometimes that's done when there are multiple versions of a function,
> but it's bad practice since you're in a reserved namespace (especially
> if you go and do the same thing in a normal userspace program). In this
> case there isn't even a non-underscore version, so it's just gratuitous.
>
> > > > +/*
> > > > + * Stub implementations for outer cache operations
> > > > + */
> > > > +void __v8_outer_cache_enable(void) {}
> > > > +void v8_outer_cache_enable(void)
> > > > + __attribute__((weak, alias("__v8_outer_cache_enable")));
> > > > +
> > > > +void __v8_outer_cache_disable(void) {}
> > > > +void v8_outer_cache_disable(void)
> > > > + __attribute__((weak, alias("__v8_outer_cache_disable")));
> > > > +
> > > > +void __v8_outer_cache_flush_all(void) {}
> > > > +void v8_outer_cache_flush_all(void)
> > > > + __attribute__((weak, alias("__v8_outer_cache_flush_all")));
> > > > +
> > > > +void __v8_outer_cache_inval_all(void) {}
> > > > +void v8_outer_cache_inval_all(void)
> > > > + __attribute__((weak, alias("__v8_outer_cache_inval_all")));
> > > > +
> > > > +void __v8_outer_cache_flush_range(u64 start, u64 end) {}
> > > > +void v8_outer_cache_flush_range(u64 start, u64 end)
> > > > + __attribute__((weak, alias("__v8_outer_cache_flush_range")));
> > > > +
> > > > +void __v8_outer_cache_inval_range(u64 start, u64 end) {}
> > > > +void v8_outer_cache_inval_range(u64 start, u64 end)
> > > > + __attribute__((weak, alias("__v8_outer_cache_inval_range")));
> > >
> > > What level do you anticipate these being overriden at? Individual
> > > chips? Why?
> > It's socs. I don't know how the armv8 processor would like to be. It's just derived from __v7_outer_cache*.
>
> Is this for flushing caches that are outside the core? On powerpc you
> could do that with architected instructions for a range flush -- is that
> not the case with ARM? Do the IC/DC instructions not operate on caches
> outside the core?
I noticed that cache-pl310.c implements v7_outer_* functions.
IC/DC instructions could maintain caches in cache hierarchy of armv8
whatever the cache is outside the core or inside the core.
But armv8 architecture reference manual(not totally completed) do not
require all caches exist in the cache hierarchy. Maybe some processors
have it's own cache level that is not maintained by IC/DC instructions.
who knows.
I keep this just because it existed in armv7.
Best regards,
David
>
> > > > diff --git a/arch/arm/cpu/armv8/config.mk b/arch/arm/cpu/armv8/config.mk
> > > > new file mode 100644
> > > > index 0000000..aae2170
> > > > --- /dev/null
> > > > +++ b/arch/arm/cpu/armv8/config.mk
> > > > @@ -0,0 +1,31 @@
> > > > +#
> > > > +# Copyright (c) 2013 FengHua <fenghua@phytium.com.cn>
> > > > +#
> > > > +# See file CREDITS for list of people who contributed to this
> > > > +# project.
> > > > +#
> > > > +# This program is free software; you can redistribute it and/or
> > > > +# modify it under the terms of the GNU General Public License as
> > > > +# published by the Free Software Foundation; either version 2 of
> > > > +# the License, or (at your option) any later version.
> > > > +#
> > > > +# This program is distributed in the hope that it will be useful,
> > > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > > +# GNU General Public License for more details.
> > > > +#
> > > > +# You should have received a copy of the GNU General Public License
> > > > +# along with this program; if not, write to the Free Software
> > > > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > > > +# MA 02111-1307 USA
> > > > +#
> > > > +PLATFORM_RELFLAGS += -fno-common -ffixed-x18
> > >
> > > Is -ffixed-x18 necessary, or will GCC do the right thing when it sees
> > > that x18 has been declared as a register variable?
> > >
> > I am not sure and will check it.
>
> GCC complains without --fixed-x18 because it views it as a volatile
> register. The ABI says this about it: "The Platform Register. If the
> platform ABI needs a dedicated register, this is it. Otherwise a
> temporary register."
>
> > > > diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h
> > > > index ff13f36..70be196 100644
> > > > --- a/arch/arm/include/asm/macro.h
> > > > +++ b/arch/arm/include/asm/macro.h
> > > > @@ -54,5 +54,31 @@
> > > > bcs 1b
> > > > .endm
> > > >
> > > > +#ifdef CONFIG_ARMV8
> > > > +/*
> > > > + * Register aliases.
> > > > + */
> > > > +lr .req x30 // link register
> > > > +
> > > > +/*
> > > > + * Stack pushing/popping (register pairs only).
> > > > + * Equivalent to store decrement before,
> > > > + * load increment after.
> > > > + */
> > > > +.macro push, xreg1, xreg2
> > > > + stp \xreg1, \xreg2, [sp, #-16]!
> > > > +.endm
> > > > +
> > > > +.macro pop, xreg1, xreg2
> > > > + ldp \xreg1, \xreg2, [sp], #16
> > > > +.endm
> > >
> > > More uncredited and license-incompatible Linux copying (the macros
> > > themselves might not be copyrightable, but the comments are...).
> > >
> > I will modify the comments.
>
> Please be aware that modifying the comments is generally not an
> acceptable alternative to rewriting from scratch. The non-comment
> portion of the above quote might not be regarded as copyrightable, but
> we're not lawyers and shouldn't rely on such things if we can avoid it.
>
> > > > diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h
> > > > index c412486..0da38cb 100644
> > > > --- a/arch/arm/include/asm/posix_types.h
> > > > +++ b/arch/arm/include/asm/posix_types.h
> > > > @@ -19,6 +19,8 @@
> > > > * assume GCC is being used.
> > > > */
> > > >
> > > > +#ifndef CONFIG_ARMV8
> > >
> > > You need to include config.h first. For example, the warnings in
> > > lib/hashtable.c are due to picking up the 32-bit definition of
> > > __kernel_size_t.
> >
> > Maybe, it is better that config.h is included in hashtable.c
>
> No. If you use a config symbol in this file, then this file should
> include config.h. Otherwise we'll silently break on the next file that
> has a similar problem.
>
> -Scott
>
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v5 1/4] core support of arm64
2013-09-11 14:13 ` FengHua
@ 2013-09-12 0:16 ` Scott Wood
0 siblings, 0 replies; 18+ messages in thread
From: Scott Wood @ 2013-09-12 0:16 UTC (permalink / raw)
To: u-boot
On Wed, 2013-09-11 at 22:13 +0800, FengHua wrote:
>
>
> > -----????-----
> > ???: "Scott Wood" <scottwood@freescale.com>
> > ????: 2013?9?10? ???
> > ???: FengHua <fenghua@phytium.com.cn>
> > ??: u-boot at lists.denx.de, trini at ti.com
> > ??: Re: Re: [U-Boot] [PATCH v5 1/4] core support of arm64
> >
> > On Sat, 2013-09-07 at 22:56 +0800, FengHua wrote:
> > > > ARM64, though I've got a patch coming that will make the check work with
> > > > arm64.
> > > >
> > > > Likewise elsewhere -- most if not all of the CONFIG_ARMV8 uses should be
> > > > CONFIG_ARM64.
> > > >
> > >
> > > Actually, the naming is so confusing. The directory's name is armv8,
> > > but it only represents aarch64 here. So, whether CONFIG_ARMV8 or CONFIG_ARM64 should be used
> > > is difficult to make decision.
> >
> > Files that are about 64-bit rather than armv8 should not go in the armv8
> > directory. E.g. relocate should be arch/arm/lib/relocate64.S.
> >
>
> crt0.S and relocate.S both could be moved to /arm/lib/ and renamed.
> Currently, I try to keep armv8 specific codes within armv8 directory
> and do not mixed with original arm code. Absolutely we should did so when armv9 coming.
crt0 and relocate should be in in lib now. The others can probably stay
in armv8 until we see what is different in armv9.
> > > > > +void v8_outer_cache_inval_range(u64 start, u64 end)
> > > > > + __attribute__((weak, alias("__v8_outer_cache_inval_range")));
> > > >
> > > > What level do you anticipate these being overriden at? Individual
> > > > chips? Why?
> > > It's socs. I don't know how the armv8 processor would like to be. It's just derived from __v7_outer_cache*.
> >
> > Is this for flushing caches that are outside the core? On powerpc you
> > could do that with architected instructions for a range flush -- is that
> > not the case with ARM? Do the IC/DC instructions not operate on caches
> > outside the core?
>
> I noticed that cache-pl310.c implements v7_outer_* functions.
> IC/DC instructions could maintain caches in cache hierarchy of armv8
> whatever the cache is outside the core or inside the core.
> But armv8 architecture reference manual(not totally completed) do not
> require all caches exist in the cache hierarchy. Maybe some processors
> have it's own cache level that is not maintained by IC/DC instructions.
> who knows.
> I keep this just because it existed in armv7.
I'd leave it out until a need is observed.
-Scott
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2013-09-12 0:16 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-24 1:06 [U-Boot] [PATCH v5 0/4] arm64 patch fenghua at phytium.com.cn
2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-24 1:06 ` [U-Boot] [PATCH v5 1/4] core support of arm64 fenghua at phytium.com.cn
2013-09-06 20:31 ` Scott Wood
2013-09-07 14:56 ` FengHua
2013-09-09 17:19 ` Scott Wood
2013-09-11 14:13 ` FengHua
2013-09-12 0:16 ` Scott Wood
2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-24 1:06 ` [U-Boot] [PATCH v5 2/4] board " fenghua at phytium.com.cn
2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-24 1:06 ` [U-Boot] [PATCH v5 3/4] generic board patch of manual reloc and zero gd_t fenghua at phytium.com.cn
2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-24 1:06 ` [U-Boot] [PATCH v5 4/4] 64bit initrd start address support fenghua at phytium.com.cn
2013-08-24 1:06 ` fenghua at phytium.com.cn
2013-08-27 16:40 ` [U-Boot] [PATCH v5 0/4] arm64 patch Ian Campbell
2013-08-28 14:03 ` FengHua
2013-08-28 11:22 ` Marek Vasut
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.