* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2013-09-04 15:15 Andreas Bießmann
2013-09-05 10:16 ` Albert ARIBAUD
0 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2013-09-04 15:15 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull these two fixes into u-boot-arm/master for 2013.10 release.
The following changes since commit 4eef93da262048eb1118e726b3ec5b8ebd3c6c91:
Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' (2013-09-04 11:50:25 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 27871e6b519ccd933bd91c879241995c272fef3b:
ARM: atmel: sama5d3: drop unused CONFIG_NET_MULTI (2013-09-04 17:07:30 +0200)
----------------------------------------------------------------
Bo Shen (1):
ARM: atmel: sama5d3: drop unused CONFIG_NET_MULTI
Wu, Josh (1):
mtd: atmel_nand: pmecc: fix bug fail to correct bit error in 1024-bytes sector
drivers/mtd/nand/atmel_nand.c | 3 ++-
include/configs/sama5d3xek.h | 1 -
2 files changed, 2 insertions(+), 2 deletions(-)
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-09-04 15:15 [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master Andreas Bießmann
@ 2013-09-05 10:16 ` Albert ARIBAUD
0 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2013-09-05 10:16 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Wed, 4 Sep 2013 17:15:51 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull these two fixes into u-boot-arm/master for 2013.10 release.
>
> The following changes since commit 4eef93da262048eb1118e726b3ec5b8ebd3c6c91:
>
> Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' (2013-09-04 11:50:25 +0200)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 27871e6b519ccd933bd91c879241995c272fef3b:
>
> ARM: atmel: sama5d3: drop unused CONFIG_NET_MULTI (2013-09-04 17:07:30 +0200)
>
> ----------------------------------------------------------------
> Bo Shen (1):
> ARM: atmel: sama5d3: drop unused CONFIG_NET_MULTI
>
> Wu, Josh (1):
> mtd: atmel_nand: pmecc: fix bug fail to correct bit error in 1024-bytes sector
>
> drivers/mtd/nand/atmel_nand.c | 3 ++-
> include/configs/sama5d3xek.h | 1 -
> 2 files changed, 2 insertions(+), 2 deletions(-)
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2014-10-10 20:00 Andreas Bießmann
@ 2014-10-11 22:58 ` Albert ARIBAUD
0 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2014-10-11 22:58 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Fri, 10 Oct 2014 22:00:31 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull these changes into u-boot-arm/master. They are two generic board
> conversions which are trivial and a fix for gigabit ethernet on sama5d3xek.
>
> The following changes since commit ebf8644a113a36b163c2e06fe1e081c73f563c3a:
>
> Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' (2014-10-10 08:56:01 +0200)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to d0b3723034aa865b8618428739efe1d98b1a2e2b:
>
> arm, at91: add generic board support for the taurus and corvus board (2014-10-10 21:51:19 +0200)
>
> ----------------------------------------------------------------
> Andreas Bie?mann (2):
> macb: simplify gmac initialisation
> sama5d3xek: run PHY's config
>
> Bo Shen (1):
> ARM: atmel: switch at91sam9263ek to generic board
>
> Heiko Schocher (1):
> arm, at91: add generic board support for the taurus and corvus board
>
> board/atmel/sama5d3xek/sama5d3xek.c | 29 ++++++++++++++++++++---------
> drivers/net/macb.c | 25 ++++++++-----------------
> include/configs/at91sam9263ek.h | 2 ++
> include/configs/corvus.h | 2 ++
> include/configs/taurus.h | 2 ++
> 5 files changed, 34 insertions(+), 26 deletions(-)
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2014-10-10 20:00 Andreas Bießmann
2014-10-11 22:58 ` Albert ARIBAUD
0 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2014-10-10 20:00 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull these changes into u-boot-arm/master. They are two generic board
conversions which are trivial and a fix for gigabit ethernet on sama5d3xek.
The following changes since commit ebf8644a113a36b163c2e06fe1e081c73f563c3a:
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' (2014-10-10 08:56:01 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to d0b3723034aa865b8618428739efe1d98b1a2e2b:
arm, at91: add generic board support for the taurus and corvus board (2014-10-10 21:51:19 +0200)
----------------------------------------------------------------
Andreas Bie?mann (2):
macb: simplify gmac initialisation
sama5d3xek: run PHY's config
Bo Shen (1):
ARM: atmel: switch at91sam9263ek to generic board
Heiko Schocher (1):
arm, at91: add generic board support for the taurus and corvus board
board/atmel/sama5d3xek/sama5d3xek.c | 29 ++++++++++++++++++++---------
drivers/net/macb.c | 25 ++++++++-----------------
include/configs/at91sam9263ek.h | 2 ++
include/configs/corvus.h | 2 ++
include/configs/taurus.h | 2 ++
5 files changed, 34 insertions(+), 26 deletions(-)
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2014-09-19 6:32 Andreas Bießmann
@ 2014-09-21 14:56 ` Albert ARIBAUD
0 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2014-09-21 14:56 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Fri, 19 Sep 2014 08:32:28 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull the following changes into u-boot-arm/master.
>
> The following changes since commit 9170818a4e004af7893fa0113f6e5b4afafded55:
>
> kconfiglib: change SPDX-License-Identifier to ISC (2014-09-17 21:03:18 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 015b18c642d9b0f92d1b35f6d6ed73a6a0b29675:
>
> ARM: at91sam9rlek: convert to generic board support (2014-09-19 00:11:24 +0200)
>
> ----------------------------------------------------------------
> Bo Shen (7):
> ARM: atmel: sama5d3xek: add nor flash init function
> ARM: atmel: sama5d3xek: enable NOR flash support
> ARM: atmel: sama5d3: add timings register
> ARM: atmel: use pcr to enable or disable peripheral clock
> ARM: atmel: add pcr related definition
> USB: ohci-at91: use pcr to enable or disable clock
> USB: ehci-atmel: use pcr to enable or disable clock
>
> Boris BREZILLON (1):
> mtd: atmel_nand: Disable subpage NAND write when using Atmel PMECC
>
> Wu, Josh (3):
> mtd: atmel-nand: use pmecc_readl(b)/pmecc_writel to access the pmecc register
> ARM: at91sam9n12ek: convert to generic board support
> ARM: at91sam9rlek: convert to generic board support
>
> arch/arm/cpu/armv7/at91/clock.c | 24 +++++++++--
> arch/arm/include/asm/arch-at91/at91_pmc.h | 6 ++-
> arch/arm/include/asm/arch-at91/clk.h | 1 +
> arch/arm/include/asm/arch-at91/sama5d3.h | 1 +
> arch/arm/include/asm/arch-at91/sama5d3_smc.h | 3 +-
> board/atmel/sama5d3xek/sama5d3xek.c | 58 ++++++++++++++++++++++++++
> drivers/mtd/nand/atmel_nand.c | 22 +++++-----
> drivers/mtd/nand/atmel_nand_ecc.h | 3 ++
> drivers/usb/host/ehci-atmel.c | 8 ++++
> drivers/usb/host/ohci-at91.c | 8 ++--
> include/configs/at91sam9n12ek.h | 1 +
> include/configs/at91sam9rlek.h | 2 +
> include/configs/sama5d3xek.h | 13 +++++-
> 13 files changed, 129 insertions(+), 21 deletions(-)
Applied to u-boot-arm/master, thanks!
(7 boards fail to build after like before this PR, namely openrd_client
tricorder_flash tricorder cm_fx6 openrd_ultimate trimslice openrd_base,
all of which are accounted for)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2014-09-19 6:32 Andreas Bießmann
2014-09-21 14:56 ` Albert ARIBAUD
0 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2014-09-19 6:32 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull the following changes into u-boot-arm/master.
The following changes since commit 9170818a4e004af7893fa0113f6e5b4afafded55:
kconfiglib: change SPDX-License-Identifier to ISC (2014-09-17 21:03:18 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 015b18c642d9b0f92d1b35f6d6ed73a6a0b29675:
ARM: at91sam9rlek: convert to generic board support (2014-09-19 00:11:24 +0200)
----------------------------------------------------------------
Bo Shen (7):
ARM: atmel: sama5d3xek: add nor flash init function
ARM: atmel: sama5d3xek: enable NOR flash support
ARM: atmel: sama5d3: add timings register
ARM: atmel: use pcr to enable or disable peripheral clock
ARM: atmel: add pcr related definition
USB: ohci-at91: use pcr to enable or disable clock
USB: ehci-atmel: use pcr to enable or disable clock
Boris BREZILLON (1):
mtd: atmel_nand: Disable subpage NAND write when using Atmel PMECC
Wu, Josh (3):
mtd: atmel-nand: use pmecc_readl(b)/pmecc_writel to access the pmecc register
ARM: at91sam9n12ek: convert to generic board support
ARM: at91sam9rlek: convert to generic board support
arch/arm/cpu/armv7/at91/clock.c | 24 +++++++++--
arch/arm/include/asm/arch-at91/at91_pmc.h | 6 ++-
arch/arm/include/asm/arch-at91/clk.h | 1 +
arch/arm/include/asm/arch-at91/sama5d3.h | 1 +
arch/arm/include/asm/arch-at91/sama5d3_smc.h | 3 +-
board/atmel/sama5d3xek/sama5d3xek.c | 58 ++++++++++++++++++++++++++
drivers/mtd/nand/atmel_nand.c | 22 +++++-----
drivers/mtd/nand/atmel_nand_ecc.h | 3 ++
drivers/usb/host/ehci-atmel.c | 8 ++++
drivers/usb/host/ohci-at91.c | 8 ++--
include/configs/at91sam9n12ek.h | 1 +
include/configs/at91sam9rlek.h | 2 +
include/configs/sama5d3xek.h | 13 +++++-
13 files changed, 129 insertions(+), 21 deletions(-)
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2014-06-14 16:19 Andreas Bießmann
@ 2014-06-24 19:16 ` Albert ARIBAUD
0 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2014-06-24 19:16 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Sat, 14 Jun 2014 18:19:26 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull these changes from u-boot-atmel/master into
> u-boot-arm/master.
>
> This request contains one avr32 related patch which is required to get the
> macb change compile clean. Therefore this one is included here rather than
> going through u-boot-avr32.
>
> The following changes since commit 0a26e1d6c394aacbf1153977b7348d1dff85db3f:
>
> arm: fix a double-definition error of _start symbol (2014-06-09 10:36:40 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 6dbeb893c4a7668d0098318d6668ccf59bfbfdea:
>
> arm: ethernut5: convert to generic board (2014-06-14 18:13:15 +0200)
>
> ----------------------------------------------------------------
> Andreas Bie?mann (2):
> avr32: migrate cache functions
> macb: make checkpatch clean
>
> Tim Schendekehl (1):
> arm: ethernut5: convert to generic board
>
> Wu, Josh (3):
> net: macb: enable dcache in macb
> video: atmel_hlcdfb: enable dcache support
> ARMv7: at91: enable ICache and DCache.
>
> arch/arm/cpu/armv7/at91/cpu.c | 2 +
> arch/avr32/cpu/cache.c | 20 ++--
> .../avr32/include/asm/arch-at32ap700x/cacheflush.h | 2 -
> arch/avr32/include/asm/dma-mapping.h | 6 +-
> arch/avr32/lib/board.c | 4 +-
> drivers/net/macb.c | 113 +++++++++++++++-----
> drivers/video/atmel_hlcdfb.c | 6 ++
> include/configs/ethernut5.h | 2 +
> 8 files changed, 110 insertions(+), 45 deletions(-)
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2014-06-14 16:19 Andreas Bießmann
2014-06-24 19:16 ` Albert ARIBAUD
0 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2014-06-14 16:19 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull these changes from u-boot-atmel/master into
u-boot-arm/master.
This request contains one avr32 related patch which is required to get the
macb change compile clean. Therefore this one is included here rather than
going through u-boot-avr32.
The following changes since commit 0a26e1d6c394aacbf1153977b7348d1dff85db3f:
arm: fix a double-definition error of _start symbol (2014-06-09 10:36:40 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 6dbeb893c4a7668d0098318d6668ccf59bfbfdea:
arm: ethernut5: convert to generic board (2014-06-14 18:13:15 +0200)
----------------------------------------------------------------
Andreas Bie?mann (2):
avr32: migrate cache functions
macb: make checkpatch clean
Tim Schendekehl (1):
arm: ethernut5: convert to generic board
Wu, Josh (3):
net: macb: enable dcache in macb
video: atmel_hlcdfb: enable dcache support
ARMv7: at91: enable ICache and DCache.
arch/arm/cpu/armv7/at91/cpu.c | 2 +
arch/avr32/cpu/cache.c | 20 ++--
.../avr32/include/asm/arch-at32ap700x/cacheflush.h | 2 -
arch/avr32/include/asm/dma-mapping.h | 6 +-
arch/avr32/lib/board.c | 4 +-
drivers/net/macb.c | 113 +++++++++++++++-----
drivers/video/atmel_hlcdfb.c | 6 ++
include/configs/ethernut5.h | 2 +
8 files changed, 110 insertions(+), 45 deletions(-)
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2014-05-26 22:16 Andreas Bießmann
@ 2014-05-30 17:45 ` Albert ARIBAUD
0 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2014-05-30 17:45 UTC (permalink / raw)
To: u-boot
Hi Andreas and sorry for the dupe mail,
On Tue, 27 May 2014 00:16:26 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull the following changes from u-boot-atmel/master into
> u-boot-arm/master.
>
> The following changes since commit 49692c5f517d8e44ed9db0de778728fe7d2a300c:
>
> net/designware: Make DMA burst length configurable and reduce by default (2014-05-25 17:23:58 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 9637a1bb896efe392a58dd2772e2c3fcb646409d:
>
> ARM: at91sam9m10g45ek: add mmc environment configuration support (2014-05-27 00:10:55 +0200)
>
> ----------------------------------------------------------------
> Andreas Bie?mann (4):
> corvus: remove unneeded CONFIG_AT91_LEGACY
> mkimage: add atmelimage
> arm:at91: enable ROM loadable atmel image
> sama5d3xek: enable PMECC header generation
>
> Bo Shen (6):
> ARM: atmel: switch to main crystal osc for SPL boot
> ARM: atmel: enable SPL on sama5d3_xplained board
> ARM: atmel: sama5d3xek: convert to generic board
> ARM: atmel: sama5d3_xplained: convert to generic board
> ARM: atmel: at91sam9m10g45ek: convert to generic board
> ARM: atmel: at91sam9x5ek: convert to generic board
>
> Wu, Josh (8):
> gpio: at91: add sanity check for the NULL pointer
> mmc: atmel_mci: fix print incorrect buffer content for debug
> ARM: at91: remove AT91X40 macro since it is not use any more
> ARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC header
> at91: remove redundant AT91FAMILY definition in board config file
> ARM: at91: remove redundant ARM926EJS definition in board config files
> ARM: at91sam9m10g45ek: enable mci0 support
> ARM: at91sam9m10g45ek: add mmc environment configuration support
>
> .../cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 17 +
> arch/arm/cpu/armv7/at91/config.mk | 10 +
> arch/arm/cpu/at91-common/spl.c | 39 +++
> arch/arm/include/asm/arch-at91/at91_pmc.h | 4 +
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 3 +
> arch/arm/include/asm/arch-at91/hardware.h | 2 -
> board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 10 +
> board/atmel/sama5d3_xplained/sama5d3_xplained.c | 87 +++++
> boards.cfg | 1 +
> common/image.c | 1 +
> doc/README.atmel_pmecc | 21 ++
> drivers/gpio/at91_gpio.c | 3 +-
> drivers/mmc/gen_atmel_mci.c | 5 +-
> include/configs/at91sam9m10g45ek.h | 37 ++-
> include/configs/at91sam9n12ek.h | 3 -
> include/configs/at91sam9x5ek.h | 3 +-
> include/configs/corvus.h | 3 -
> include/configs/cpu9260.h | 1 -
> include/configs/ethernut5.h | 2 -
> include/configs/sama5d3_xplained.h | 53 ++-
> include/configs/sama5d3xek.h | 4 +-
> include/configs/vl_ma2sc.h | 2 -
> include/image.h | 1 +
> spl/Makefile | 11 +
> tools/Makefile | 3 +
> tools/atmel_pmecc_params.c | 51 +++
> tools/atmelimage.c | 342 ++++++++++++++++++++
> tools/imagetool.c | 2 +
> tools/imagetool.h | 1 +
> 29 files changed, 701 insertions(+), 21 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/at91/config.mk
> create mode 100644 tools/atmel_pmecc_params.c
> create mode 100644 tools/atmelimage.c
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2014-05-26 22:16 Andreas Bießmann
2014-05-30 17:45 ` Albert ARIBAUD
0 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2014-05-26 22:16 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull the following changes from u-boot-atmel/master into
u-boot-arm/master.
The following changes since commit 49692c5f517d8e44ed9db0de778728fe7d2a300c:
net/designware: Make DMA burst length configurable and reduce by default (2014-05-25 17:23:58 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 9637a1bb896efe392a58dd2772e2c3fcb646409d:
ARM: at91sam9m10g45ek: add mmc environment configuration support (2014-05-27 00:10:55 +0200)
----------------------------------------------------------------
Andreas Bie?mann (4):
corvus: remove unneeded CONFIG_AT91_LEGACY
mkimage: add atmelimage
arm:at91: enable ROM loadable atmel image
sama5d3xek: enable PMECC header generation
Bo Shen (6):
ARM: atmel: switch to main crystal osc for SPL boot
ARM: atmel: enable SPL on sama5d3_xplained board
ARM: atmel: sama5d3xek: convert to generic board
ARM: atmel: sama5d3_xplained: convert to generic board
ARM: atmel: at91sam9m10g45ek: convert to generic board
ARM: atmel: at91sam9x5ek: convert to generic board
Wu, Josh (8):
gpio: at91: add sanity check for the NULL pointer
mmc: atmel_mci: fix print incorrect buffer content for debug
ARM: at91: remove AT91X40 macro since it is not use any more
ARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC header
at91: remove redundant AT91FAMILY definition in board config file
ARM: at91: remove redundant ARM926EJS definition in board config files
ARM: at91sam9m10g45ek: enable mci0 support
ARM: at91sam9m10g45ek: add mmc environment configuration support
.../cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 17 +
arch/arm/cpu/armv7/at91/config.mk | 10 +
arch/arm/cpu/at91-common/spl.c | 39 +++
arch/arm/include/asm/arch-at91/at91_pmc.h | 4 +
arch/arm/include/asm/arch-at91/at91sam9x5.h | 3 +
arch/arm/include/asm/arch-at91/hardware.h | 2 -
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 10 +
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 87 +++++
boards.cfg | 1 +
common/image.c | 1 +
doc/README.atmel_pmecc | 21 ++
drivers/gpio/at91_gpio.c | 3 +-
drivers/mmc/gen_atmel_mci.c | 5 +-
include/configs/at91sam9m10g45ek.h | 37 ++-
include/configs/at91sam9n12ek.h | 3 -
include/configs/at91sam9x5ek.h | 3 +-
include/configs/corvus.h | 3 -
include/configs/cpu9260.h | 1 -
include/configs/ethernut5.h | 2 -
include/configs/sama5d3_xplained.h | 53 ++-
include/configs/sama5d3xek.h | 4 +-
include/configs/vl_ma2sc.h | 2 -
include/image.h | 1 +
spl/Makefile | 11 +
tools/Makefile | 3 +
tools/atmel_pmecc_params.c | 51 +++
tools/atmelimage.c | 342 ++++++++++++++++++++
tools/imagetool.c | 2 +
tools/imagetool.h | 1 +
29 files changed, 701 insertions(+), 21 deletions(-)
create mode 100644 arch/arm/cpu/armv7/at91/config.mk
create mode 100644 tools/atmel_pmecc_params.c
create mode 100644 tools/atmelimage.c
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2014-03-09 18:50 Andreas Bießmann
@ 2014-03-10 8:09 ` Albert ARIBAUD
0 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2014-03-10 8:09 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Sun, 9 Mar 2014 19:50:12 +0100, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull the following changes from u-boot-atmel/master into
> u-boot-arm/master.
>
> The following changes since commit de4fdfc1f22d70c23be5443dafacb8163023f9b1:
>
> Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' (2014-03-07 14:32:42 +0100)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 27019e4a949fc3be2e895ac20839c4d4d119f902:
>
> arm: atmel: sama5d3: add nand spl boot support (2014-03-09 19:19:13 +0100)
>
> ----------------------------------------------------------------
> Andreas Henriksson (2):
> at91sam9263ek: add mmc support
> at91 gpio: fix typo in compatibility macro
>
> Bo Shen (4):
> ARM: atmel: add sama5d3 Xplained board support
> arm: atmel: sama5d3: add spi spl boot support
> mtd: nand: atmel: prepare for nand spl boot support
> arm: atmel: sama5d3: add nand spl boot support
>
> arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 25 +++
> arch/arm/cpu/at91-common/spl.c | 4 +
> arch/arm/include/asm/arch-at91/gpio.h | 2 +-
> arch/arm/include/asm/arch-at91/spl.h | 4 +
> board/atmel/at91sam9263ek/at91sam9263ek.c | 10 +
> board/atmel/sama5d3_xplained/Makefile | 15 ++
> board/atmel/sama5d3_xplained/sama5d3_xplained.c | 130 +++++++++++++
> board/atmel/sama5d3xek/sama5d3xek.c | 4 +
> boards.cfg | 2 +
> drivers/mtd/nand/atmel_nand.c | 208 +++++++++++++++++++++
> include/configs/at91sam9263ek.h | 13 ++
> include/configs/sama5d3_xplained.h | 203 ++++++++++++++++++++
> include/configs/sama5d3xek.h | 23 +++
> include/nand.h | 6 +
> 14 files changed, 648 insertions(+), 1 deletion(-)
> create mode 100644 board/atmel/sama5d3_xplained/Makefile
> create mode 100644 board/atmel/sama5d3_xplained/sama5d3_xplained.c
> create mode 100644 include/configs/sama5d3_xplained.h
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2014-03-09 18:50 Andreas Bießmann
2014-03-10 8:09 ` Albert ARIBAUD
0 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2014-03-09 18:50 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull the following changes from u-boot-atmel/master into
u-boot-arm/master.
The following changes since commit de4fdfc1f22d70c23be5443dafacb8163023f9b1:
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' (2014-03-07 14:32:42 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 27019e4a949fc3be2e895ac20839c4d4d119f902:
arm: atmel: sama5d3: add nand spl boot support (2014-03-09 19:19:13 +0100)
----------------------------------------------------------------
Andreas Henriksson (2):
at91sam9263ek: add mmc support
at91 gpio: fix typo in compatibility macro
Bo Shen (4):
ARM: atmel: add sama5d3 Xplained board support
arm: atmel: sama5d3: add spi spl boot support
mtd: nand: atmel: prepare for nand spl boot support
arm: atmel: sama5d3: add nand spl boot support
arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 25 +++
arch/arm/cpu/at91-common/spl.c | 4 +
arch/arm/include/asm/arch-at91/gpio.h | 2 +-
arch/arm/include/asm/arch-at91/spl.h | 4 +
board/atmel/at91sam9263ek/at91sam9263ek.c | 10 +
board/atmel/sama5d3_xplained/Makefile | 15 ++
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 130 +++++++++++++
board/atmel/sama5d3xek/sama5d3xek.c | 4 +
boards.cfg | 2 +
drivers/mtd/nand/atmel_nand.c | 208 +++++++++++++++++++++
include/configs/at91sam9263ek.h | 13 ++
include/configs/sama5d3_xplained.h | 203 ++++++++++++++++++++
include/configs/sama5d3xek.h | 23 +++
include/nand.h | 6 +
14 files changed, 648 insertions(+), 1 deletion(-)
create mode 100644 board/atmel/sama5d3_xplained/Makefile
create mode 100644 board/atmel/sama5d3_xplained/sama5d3_xplained.c
create mode 100644 include/configs/sama5d3_xplained.h
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-12-17 16:25 Andreas Bießmann
@ 2013-12-18 16:47 ` Albert ARIBAUD
0 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2013-12-18 16:47 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Tue, 17 Dec 2013 17:25:55 +0100, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull the following fix ups from u-boot-atmel/master into
> u-boot-arm/master.
>
> The following changes since commit d2c7074b9593d822e2359a09c21747248fdf5fac:
>
> ARM: OMAP5: clocks: Update MPU settings for OPP_NOM (2013-12-12 17:43:39 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to d51a2a2d63d83207b56a7aef7a191d081058d6ae:
>
> arm: atmel: at91sam9x5: move CONFIG_SYS_NO_FLASH to proper position (2013-12-17 17:21:18 +0100)
>
> ----------------------------------------------------------------
> Bo Shen (3):
> arm: atmel: at91sam9x5: cleanup cs configure for spi
> arm: atmel: at91sam9x5: cleanup unneeded undef
> arm: atmel: at91sam9x5: move CONFIG_SYS_NO_FLASH to proper position
>
> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 1 -
> include/configs/at91sam9x5ek.h | 13 +++----------
> 2 files changed, 3 insertions(+), 11 deletions(-)
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2013-12-17 16:25 Andreas Bießmann
2013-12-18 16:47 ` Albert ARIBAUD
0 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2013-12-17 16:25 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull the following fix ups from u-boot-atmel/master into
u-boot-arm/master.
The following changes since commit d2c7074b9593d822e2359a09c21747248fdf5fac:
ARM: OMAP5: clocks: Update MPU settings for OPP_NOM (2013-12-12 17:43:39 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to d51a2a2d63d83207b56a7aef7a191d081058d6ae:
arm: atmel: at91sam9x5: move CONFIG_SYS_NO_FLASH to proper position (2013-12-17 17:21:18 +0100)
----------------------------------------------------------------
Bo Shen (3):
arm: atmel: at91sam9x5: cleanup cs configure for spi
arm: atmel: at91sam9x5: cleanup unneeded undef
arm: atmel: at91sam9x5: move CONFIG_SYS_NO_FLASH to proper position
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 1 -
include/configs/at91sam9x5ek.h | 13 +++----------
2 files changed, 3 insertions(+), 11 deletions(-)
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-12-09 12:42 Andreas Bießmann
@ 2013-12-09 17:56 ` Albert ARIBAUD
0 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2013-12-09 17:56 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Mon, 9 Dec 2013 13:42:38 +0100, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull the following changes from u-boot-atmel/master into
> u-boot-arm/master.
>
> The following changes since commit 47ed5dd031d7d2c587e6afd386e79ccec1a1b7f7:
>
> arm: keep all sections in ELF file (2013-12-07 06:53:58 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 1dcdd86205708d3ab9f0dc3a2d6b5fa12b16fde4:
>
> arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) (2013-12-09 13:21:54 +0100)
>
> ----------------------------------------------------------------
> Andreas Bie?mann (4):
> at91: add new gpio pin definitions
> at91: redefine legacy GPIO PIN_BASE
> at91: nand: switch atmel_nand to generic GPIO API
> at91: switch coloured LED to gpio API
>
> Heiko Schocher (2):
> arm, at91: add Siemens board taurus and axm
> arm, at91: add siemens corvus board
>
> Mateusz Kulikowski (1):
> arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)
>
> arch/arm/cpu/arm926ejs/at91/led.c | 16 ++-
> arch/arm/include/asm/arch-at91/gpio.h | 26 ++++-
> board/BuS/vl_ma2sc/vl_ma2sc.c | 5 +-
> board/calao/usb_a9263/Makefile | 14 +++
> board/calao/usb_a9263/usb_a9263.c | 148 +++++++++++++++++++++++++
> board/egnite/ethernut5/ethernut5.c | 3 +-
> board/esd/meesc/meesc.c | 5 +-
> board/esd/otc570/otc570.c | 5 +-
> board/eukrea/cpu9260/cpu9260.c | 5 +-
> board/ronetix/pm9261/led.c | 14 +--
> board/ronetix/pm9261/pm9261.c | 5 +-
> board/ronetix/pm9263/led.c | 10 +-
> board/ronetix/pm9263/pm9263.c | 5 +-
> board/ronetix/pm9g45/pm9g45.c | 5 +-
> board/siemens/corvus/Makefile | 18 +++
> board/siemens/corvus/board.c | 195 +++++++++++++++++++++++++++++++++
> board/siemens/taurus/Makefile | 18 +++
> board/siemens/taurus/taurus.c | 160 +++++++++++++++++++++++++++
> boards.cfg | 4 +
> drivers/gpio/at91_gpio.c | 4 +-
> drivers/mtd/nand/atmel_nand.c | 8 +-
> include/configs/at91sam9n12ek.h | 4 +-
> include/configs/corvus.h | 165 ++++++++++++++++++++++++++++
> include/configs/cpu9260.h | 4 +-
> include/configs/ethernut5.h | 2 +-
> include/configs/meesc.h | 4 +-
> include/configs/otc570.h | 4 +-
> include/configs/pm9261.h | 10 +-
> include/configs/pm9263.h | 8 +-
> include/configs/pm9g45.h | 8 +-
> include/configs/taurus.h | 160 +++++++++++++++++++++++++++
> include/configs/usb_a9263.h | 169 ++++++++++++++++++++++++++++
> include/configs/vl_ma2sc.h | 4 +-
> 33 files changed, 1145 insertions(+), 70 deletions(-)
> create mode 100644 board/calao/usb_a9263/Makefile
> create mode 100644 board/calao/usb_a9263/usb_a9263.c
> create mode 100644 board/siemens/corvus/Makefile
> create mode 100644 board/siemens/corvus/board.c
> create mode 100644 board/siemens/taurus/Makefile
> create mode 100644 board/siemens/taurus/taurus.c
> create mode 100644 include/configs/corvus.h
> create mode 100644 include/configs/taurus.h
> create mode 100644 include/configs/usb_a9263.h
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2013-12-09 12:42 Andreas Bießmann
2013-12-09 17:56 ` Albert ARIBAUD
0 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2013-12-09 12:42 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull the following changes from u-boot-atmel/master into
u-boot-arm/master.
The following changes since commit 47ed5dd031d7d2c587e6afd386e79ccec1a1b7f7:
arm: keep all sections in ELF file (2013-12-07 06:53:58 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 1dcdd86205708d3ab9f0dc3a2d6b5fa12b16fde4:
arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263) (2013-12-09 13:21:54 +0100)
----------------------------------------------------------------
Andreas Bie?mann (4):
at91: add new gpio pin definitions
at91: redefine legacy GPIO PIN_BASE
at91: nand: switch atmel_nand to generic GPIO API
at91: switch coloured LED to gpio API
Heiko Schocher (2):
arm, at91: add Siemens board taurus and axm
arm, at91: add siemens corvus board
Mateusz Kulikowski (1):
arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)
arch/arm/cpu/arm926ejs/at91/led.c | 16 ++-
arch/arm/include/asm/arch-at91/gpio.h | 26 ++++-
board/BuS/vl_ma2sc/vl_ma2sc.c | 5 +-
board/calao/usb_a9263/Makefile | 14 +++
board/calao/usb_a9263/usb_a9263.c | 148 +++++++++++++++++++++++++
board/egnite/ethernut5/ethernut5.c | 3 +-
board/esd/meesc/meesc.c | 5 +-
board/esd/otc570/otc570.c | 5 +-
board/eukrea/cpu9260/cpu9260.c | 5 +-
board/ronetix/pm9261/led.c | 14 +--
board/ronetix/pm9261/pm9261.c | 5 +-
board/ronetix/pm9263/led.c | 10 +-
board/ronetix/pm9263/pm9263.c | 5 +-
board/ronetix/pm9g45/pm9g45.c | 5 +-
board/siemens/corvus/Makefile | 18 +++
board/siemens/corvus/board.c | 195 +++++++++++++++++++++++++++++++++
board/siemens/taurus/Makefile | 18 +++
board/siemens/taurus/taurus.c | 160 +++++++++++++++++++++++++++
boards.cfg | 4 +
drivers/gpio/at91_gpio.c | 4 +-
drivers/mtd/nand/atmel_nand.c | 8 +-
include/configs/at91sam9n12ek.h | 4 +-
include/configs/corvus.h | 165 ++++++++++++++++++++++++++++
include/configs/cpu9260.h | 4 +-
include/configs/ethernut5.h | 2 +-
include/configs/meesc.h | 4 +-
include/configs/otc570.h | 4 +-
include/configs/pm9261.h | 10 +-
include/configs/pm9263.h | 8 +-
include/configs/pm9g45.h | 8 +-
include/configs/taurus.h | 160 +++++++++++++++++++++++++++
include/configs/usb_a9263.h | 169 ++++++++++++++++++++++++++++
include/configs/vl_ma2sc.h | 4 +-
33 files changed, 1145 insertions(+), 70 deletions(-)
create mode 100644 board/calao/usb_a9263/Makefile
create mode 100644 board/calao/usb_a9263/usb_a9263.c
create mode 100644 board/siemens/corvus/Makefile
create mode 100644 board/siemens/corvus/board.c
create mode 100644 board/siemens/taurus/Makefile
create mode 100644 board/siemens/taurus/taurus.c
create mode 100644 include/configs/corvus.h
create mode 100644 include/configs/taurus.h
create mode 100644 include/configs/usb_a9263.h
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-12-01 21:50 Andreas Bießmann
@ 2013-12-02 15:51 ` Albert ARIBAUD
0 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2013-12-02 15:51 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Sun, 1 Dec 2013 22:50:12 +0100, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull u-boot-atmel/master into u-boot-arm/master.
> This PR supersedes http://patchwork.ozlabs.org/patch/291044/
>
> The following changes since commit 56eb3da43fab5990a4b7bc118b76c7cae2ceb140:
>
> arm, am335x: update for the siemens boards (2013-11-12 09:53:59 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to d07e2b598a690d6eb75019b379fc4933affe3d2c:
>
> arm: atmel: eb_cpux9k2: config clean up (2013-12-01 22:38:53 +0100)
>
> ----------------------------------------------------------------
> Andreas Bie?mann (6):
> video: remove AT91 legacy API from bus_vcxk
> i2c: switch from AT91 legacy to ATMEL legacy
> at91sam9m10g45ek: remove unused CONFIG_AT91_LEGACY
> snapper9260: remove unused AT91_LEGACY
> net: remove unused CONFIG_AT91_LEGACY
> at91: remove all occourances of CONFIG_AT91_LEGACY
>
> Bo Shen (8):
> arm: atmel: sama5d3: correct the ID for DBGU and PIT
> arm: at91: pm9261: remove undefined bit in mckr
> arm: atmel: sama5d3: correct the error define of DIV
> arm: atmel: sama5d3: the offset of MULA is 18
> arm: atmel: sama5d3: early enable PIO peripherals
> arm: atmel: add ddr2 initialization function
> arm: atmel: sama5d3: spl boot from fat fs SD card
> arm: atmel: sam9m10g45ek: let CONFIG_SYS_NO_FLASH at proper position
>
> Heiko Schocher (1):
> arm926ejs, at91: add common phy_reset function
>
> Jens Scharsig (BuS Elektronik) (1):
> arm: atmel: eb_cpux9k2: config clean up
>
> Wu, Josh (1):
> ARM: at91: sama5d3: add support for sama5d36 chip
>
> arch/arm/cpu/Makefile | 1 +
> arch/arm/cpu/armv7/Makefile | 2 +-
> arch/arm/cpu/armv7/at91/sama5d3_devices.c | 6 +-
> arch/arm/cpu/armv7/at91/timer.c | 2 +-
> arch/arm/cpu/at91-common/Makefile | 12 +++
> arch/arm/cpu/at91-common/mpddrc.c | 124 +++++++++++++++++++++++
> arch/arm/cpu/at91-common/phy.c | 57 +++++++++++
> arch/arm/cpu/at91-common/spl.c | 90 ++++++++++++++++
> arch/arm/cpu/at91-common/u-boot-spl.lds | 50 +++++++++
> arch/arm/include/asm/arch-at91/at91_common.h | 5 +
> arch/arm/include/asm/arch-at91/at91_pio.h | 33 ------
> arch/arm/include/asm/arch-at91/at91_pit.h | 16 ---
> arch/arm/include/asm/arch-at91/at91_pmc.h | 59 ++---------
> arch/arm/include/asm/arch-at91/at91_spi.h | 2 +-
> arch/arm/include/asm/arch-at91/at91_wdt.h | 21 ----
> arch/arm/include/asm/arch-at91/at91cap9.h | 69 -------------
> arch/arm/include/asm/arch-at91/at91sam9_smc.h | 60 -----------
> arch/arm/include/asm/arch-at91/atmel_mpddrc.h | 115 +++++++++++++++++++++
> arch/arm/include/asm/arch-at91/sama5d3.h | 3 +
> arch/arm/include/asm/arch-at91/spl.h | 20 ++++
> board/BuS/vl_ma2sc/vl_ma2sc.c | 18 +---
> board/afeb9260/afeb9260.c | 18 +---
> board/atmel/at91sam9260ek/at91sam9260ek.c | 19 +---
> board/atmel/at91sam9263ek/at91sam9263ek.c | 19 +---
> board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 19 +---
> board/atmel/sama5d3xek/sama5d3xek.c | 91 +++++++++++++++++
> board/bluewater/snapper9260/snapper9260.c | 16 +--
> board/calao/sbc35_a9g20/sbc35_a9g20.c | 19 +---
> board/eukrea/cpu9260/cpu9260.c | 18 +---
> board/taskit/stamp9g20/stamp9g20.c | 31 +-----
> doc/README.at91-soc | 7 ++
> drivers/i2c/soft_i2c.c | 2 +-
> drivers/net/at91_emac.c | 9 --
> drivers/video/bus_vcxk.c | 15 ---
> include/configs/afeb9260.h | 2 +-
> include/configs/at91sam9260ek.h | 1 +
> include/configs/at91sam9263ek.h | 1 +
> include/configs/at91sam9m10g45ek.h | 9 +-
> include/configs/cpu9260.h | 1 +
> include/configs/eb_cpux9k2.h | 4 -
> include/configs/pm9261.h | 6 +-
> include/configs/sama5d3xek.h | 34 +++++++
> include/configs/sbc35_a9g20.h | 1 +
> include/configs/snapper9260.h | 2 +-
> include/configs/stamp9g20.h | 1 +
> include/configs/vl_ma2sc.h | 1 +
> include/i2c.h | 2 +-
> 47 files changed, 655 insertions(+), 458 deletions(-)
> create mode 100644 arch/arm/cpu/at91-common/Makefile
> create mode 100644 arch/arm/cpu/at91-common/mpddrc.c
> create mode 100644 arch/arm/cpu/at91-common/phy.c
> create mode 100644 arch/arm/cpu/at91-common/spl.c
> create mode 100644 arch/arm/cpu/at91-common/u-boot-spl.lds
> create mode 100644 arch/arm/include/asm/arch-at91/atmel_mpddrc.h
> create mode 100644 arch/arm/include/asm/arch-at91/spl.h
Applied to u-boot-arm/master, thanks! And apologies for the delay.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2013-12-01 21:50 Andreas Bießmann
2013-12-02 15:51 ` Albert ARIBAUD
0 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2013-12-01 21:50 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull u-boot-atmel/master into u-boot-arm/master.
This PR supersedes http://patchwork.ozlabs.org/patch/291044/
The following changes since commit 56eb3da43fab5990a4b7bc118b76c7cae2ceb140:
arm, am335x: update for the siemens boards (2013-11-12 09:53:59 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to d07e2b598a690d6eb75019b379fc4933affe3d2c:
arm: atmel: eb_cpux9k2: config clean up (2013-12-01 22:38:53 +0100)
----------------------------------------------------------------
Andreas Bie?mann (6):
video: remove AT91 legacy API from bus_vcxk
i2c: switch from AT91 legacy to ATMEL legacy
at91sam9m10g45ek: remove unused CONFIG_AT91_LEGACY
snapper9260: remove unused AT91_LEGACY
net: remove unused CONFIG_AT91_LEGACY
at91: remove all occourances of CONFIG_AT91_LEGACY
Bo Shen (8):
arm: atmel: sama5d3: correct the ID for DBGU and PIT
arm: at91: pm9261: remove undefined bit in mckr
arm: atmel: sama5d3: correct the error define of DIV
arm: atmel: sama5d3: the offset of MULA is 18
arm: atmel: sama5d3: early enable PIO peripherals
arm: atmel: add ddr2 initialization function
arm: atmel: sama5d3: spl boot from fat fs SD card
arm: atmel: sam9m10g45ek: let CONFIG_SYS_NO_FLASH at proper position
Heiko Schocher (1):
arm926ejs, at91: add common phy_reset function
Jens Scharsig (BuS Elektronik) (1):
arm: atmel: eb_cpux9k2: config clean up
Wu, Josh (1):
ARM: at91: sama5d3: add support for sama5d36 chip
arch/arm/cpu/Makefile | 1 +
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/at91/sama5d3_devices.c | 6 +-
arch/arm/cpu/armv7/at91/timer.c | 2 +-
arch/arm/cpu/at91-common/Makefile | 12 +++
arch/arm/cpu/at91-common/mpddrc.c | 124 +++++++++++++++++++++++
arch/arm/cpu/at91-common/phy.c | 57 +++++++++++
arch/arm/cpu/at91-common/spl.c | 90 ++++++++++++++++
arch/arm/cpu/at91-common/u-boot-spl.lds | 50 +++++++++
arch/arm/include/asm/arch-at91/at91_common.h | 5 +
arch/arm/include/asm/arch-at91/at91_pio.h | 33 ------
arch/arm/include/asm/arch-at91/at91_pit.h | 16 ---
arch/arm/include/asm/arch-at91/at91_pmc.h | 59 ++---------
arch/arm/include/asm/arch-at91/at91_spi.h | 2 +-
arch/arm/include/asm/arch-at91/at91_wdt.h | 21 ----
arch/arm/include/asm/arch-at91/at91cap9.h | 69 -------------
arch/arm/include/asm/arch-at91/at91sam9_smc.h | 60 -----------
arch/arm/include/asm/arch-at91/atmel_mpddrc.h | 115 +++++++++++++++++++++
arch/arm/include/asm/arch-at91/sama5d3.h | 3 +
arch/arm/include/asm/arch-at91/spl.h | 20 ++++
board/BuS/vl_ma2sc/vl_ma2sc.c | 18 +---
board/afeb9260/afeb9260.c | 18 +---
board/atmel/at91sam9260ek/at91sam9260ek.c | 19 +---
board/atmel/at91sam9263ek/at91sam9263ek.c | 19 +---
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 19 +---
board/atmel/sama5d3xek/sama5d3xek.c | 91 +++++++++++++++++
board/bluewater/snapper9260/snapper9260.c | 16 +--
board/calao/sbc35_a9g20/sbc35_a9g20.c | 19 +---
board/eukrea/cpu9260/cpu9260.c | 18 +---
board/taskit/stamp9g20/stamp9g20.c | 31 +-----
doc/README.at91-soc | 7 ++
drivers/i2c/soft_i2c.c | 2 +-
drivers/net/at91_emac.c | 9 --
drivers/video/bus_vcxk.c | 15 ---
include/configs/afeb9260.h | 2 +-
include/configs/at91sam9260ek.h | 1 +
include/configs/at91sam9263ek.h | 1 +
include/configs/at91sam9m10g45ek.h | 9 +-
include/configs/cpu9260.h | 1 +
include/configs/eb_cpux9k2.h | 4 -
include/configs/pm9261.h | 6 +-
include/configs/sama5d3xek.h | 34 +++++++
include/configs/sbc35_a9g20.h | 1 +
include/configs/snapper9260.h | 2 +-
include/configs/stamp9g20.h | 1 +
include/configs/vl_ma2sc.h | 1 +
include/i2c.h | 2 +-
47 files changed, 655 insertions(+), 458 deletions(-)
create mode 100644 arch/arm/cpu/at91-common/Makefile
create mode 100644 arch/arm/cpu/at91-common/mpddrc.c
create mode 100644 arch/arm/cpu/at91-common/phy.c
create mode 100644 arch/arm/cpu/at91-common/spl.c
create mode 100644 arch/arm/cpu/at91-common/u-boot-spl.lds
create mode 100644 arch/arm/include/asm/arch-at91/atmel_mpddrc.h
create mode 100644 arch/arm/include/asm/arch-at91/spl.h
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-11-13 21:24 Andreas Bießmann
@ 2013-11-22 6:35 ` Albert ARIBAUD
0 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2013-11-22 6:35 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Wed, 13 Nov 2013 22:24:59 +0100, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull the following changes into u-boot-arm/master.
>
> The following changes since commit 56eb3da43fab5990a4b7bc118b76c7cae2ceb140:
>
> arm, am335x: update for the siemens boards (2013-11-12 09:53:59 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 618bbbb2e9546aa602c97d55963e133c7e1a85ec:
>
> ARM: at91: sama5d3: add support for sama5d36 chip (2013-11-13 22:18:18 +0100)
Sorry for the delay -- on it right now.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2013-11-13 21:24 Andreas Bießmann
2013-11-22 6:35 ` Albert ARIBAUD
0 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2013-11-13 21:24 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull the following changes into u-boot-arm/master.
The following changes since commit 56eb3da43fab5990a4b7bc118b76c7cae2ceb140:
arm, am335x: update for the siemens boards (2013-11-12 09:53:59 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 618bbbb2e9546aa602c97d55963e133c7e1a85ec:
ARM: at91: sama5d3: add support for sama5d36 chip (2013-11-13 22:18:18 +0100)
----------------------------------------------------------------
Andreas Bie?mann (6):
video: remove AT91 legacy API from bus_vcxk
i2c: switch from AT91 legacy to ATMEL legacy
at91sam9m10g45ek: remove unused CONFIG_AT91_LEGACY
snapper9260: remove unused AT91_LEGACY
net: remove unused CONFIG_AT91_LEGACY
at91: remove all occourances of CONFIG_AT91_LEGACY
Wu, Josh (1):
ARM: at91: sama5d3: add support for sama5d36 chip
arch/arm/cpu/armv7/at91/sama5d3_devices.c | 4 +-
arch/arm/include/asm/arch-at91/at91_pio.h | 33 ------------
arch/arm/include/asm/arch-at91/at91_pit.h | 16 ------
arch/arm/include/asm/arch-at91/at91_pmc.h | 51 ++----------------
arch/arm/include/asm/arch-at91/at91_spi.h | 2 +-
arch/arm/include/asm/arch-at91/at91_wdt.h | 21 --------
arch/arm/include/asm/arch-at91/at91cap9.h | 69 -------------------------
arch/arm/include/asm/arch-at91/at91sam9_smc.h | 60 ---------------------
arch/arm/include/asm/arch-at91/sama5d3.h | 3 ++
doc/README.at91-soc | 7 +++
drivers/i2c/soft_i2c.c | 2 +-
drivers/net/at91_emac.c | 9 ----
drivers/video/bus_vcxk.c | 15 ------
include/configs/at91sam9m10g45ek.h | 1 -
include/configs/snapper9260.h | 1 -
include/i2c.h | 2 +-
16 files changed, 21 insertions(+), 275 deletions(-)
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-11-04 19:43 Andreas Bießmann
@ 2013-11-05 21:30 ` Albert ARIBAUD
0 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2013-11-05 21:30 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Mon, 4 Nov 2013 20:43:31 +0100, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull u-boot-atmel/master into u-boot-arm/master.
>
> The following changes since commit 304db0b38cfb04cfdb05a740d5ef27da06ea98ea:
>
> arm: Remove IXP425 boards pdnb3 and scpu (2013-10-17 09:28:08 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to c12f941bece9ed79efccfe9e4a9fd977da6975f9:
>
> at91: add defines for reset type (2013-11-04 20:32:39 +0100)
>
> ----------------------------------------------------------------
> Bo Shen (3):
> net: macb: get DMA bus width from design config register
> arm: atmel: at91sam9n12ek: add usb host support
> arm: atmel: get rid of too many ifdeffery
>
> Jens Scharsig (BuS Elektronik) (1):
> ARM: ATMEL: eb_cpux9k2: fix TEXT_BASE for ramboot target
>
> Roger Meier (1):
> at91: add defines for reset type
>
> arch/arm/include/asm/arch-at91/at91_pmc.h | 2 ++
> arch/arm/include/asm/arch-at91/at91_rstc.h | 7 +++++++
> board/atmel/at91sam9n12ek/at91sam9n12ek.c | 11 +++++++++++
> drivers/net/macb.c | 20 +++++++++++++++++++-
> drivers/net/macb.h | 11 +++++++++++
> drivers/usb/host/ohci-at91.c | 19 ++++++++++---------
> include/configs/afeb9260.h | 1 +
> include/configs/at91rm9200ek.h | 1 +
> include/configs/at91sam9260ek.h | 1 +
> include/configs/at91sam9261ek.h | 1 +
> include/configs/at91sam9263ek.h | 1 +
> include/configs/at91sam9n12ek.h | 13 +++++++++++++
> include/configs/at91sam9x5ek.h | 3 ++-
> include/configs/cpu9260.h | 1 +
> include/configs/cpuat91.h | 1 +
> include/configs/eb_cpux9k2.h | 4 +++-
> include/configs/ethernut5.h | 1 +
> include/configs/meesc.h | 1 +
> include/configs/otc570.h | 1 +
> include/configs/pm9261.h | 1 +
> include/configs/pm9263.h | 1 +
> include/configs/pm9g45.h | 1 +
> include/configs/sama5d3xek.h | 1 +
> include/configs/sbc35_a9g20.h | 1 +
> include/configs/snapper9260.h | 1 +
> include/configs/stamp9g20.h | 1 +
> include/configs/top9000.h | 1 +
> include/configs/vl_ma2sc.h | 1 +
> 28 files changed, 97 insertions(+), 12 deletions(-)
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2013-11-04 19:43 Andreas Bießmann
2013-11-05 21:30 ` Albert ARIBAUD
0 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2013-11-04 19:43 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull u-boot-atmel/master into u-boot-arm/master.
The following changes since commit 304db0b38cfb04cfdb05a740d5ef27da06ea98ea:
arm: Remove IXP425 boards pdnb3 and scpu (2013-10-17 09:28:08 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to c12f941bece9ed79efccfe9e4a9fd977da6975f9:
at91: add defines for reset type (2013-11-04 20:32:39 +0100)
----------------------------------------------------------------
Bo Shen (3):
net: macb: get DMA bus width from design config register
arm: atmel: at91sam9n12ek: add usb host support
arm: atmel: get rid of too many ifdeffery
Jens Scharsig (BuS Elektronik) (1):
ARM: ATMEL: eb_cpux9k2: fix TEXT_BASE for ramboot target
Roger Meier (1):
at91: add defines for reset type
arch/arm/include/asm/arch-at91/at91_pmc.h | 2 ++
arch/arm/include/asm/arch-at91/at91_rstc.h | 7 +++++++
board/atmel/at91sam9n12ek/at91sam9n12ek.c | 11 +++++++++++
drivers/net/macb.c | 20 +++++++++++++++++++-
drivers/net/macb.h | 11 +++++++++++
drivers/usb/host/ohci-at91.c | 19 ++++++++++---------
include/configs/afeb9260.h | 1 +
include/configs/at91rm9200ek.h | 1 +
include/configs/at91sam9260ek.h | 1 +
include/configs/at91sam9261ek.h | 1 +
include/configs/at91sam9263ek.h | 1 +
include/configs/at91sam9n12ek.h | 13 +++++++++++++
include/configs/at91sam9x5ek.h | 3 ++-
include/configs/cpu9260.h | 1 +
include/configs/cpuat91.h | 1 +
include/configs/eb_cpux9k2.h | 4 +++-
include/configs/ethernut5.h | 1 +
include/configs/meesc.h | 1 +
include/configs/otc570.h | 1 +
include/configs/pm9261.h | 1 +
include/configs/pm9263.h | 1 +
include/configs/pm9g45.h | 1 +
include/configs/sama5d3xek.h | 1 +
include/configs/sbc35_a9g20.h | 1 +
include/configs/snapper9260.h | 1 +
include/configs/stamp9g20.h | 1 +
include/configs/top9000.h | 1 +
include/configs/vl_ma2sc.h | 1 +
28 files changed, 97 insertions(+), 12 deletions(-)
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-09-19 8:31 Andreas Bießmann
@ 2013-09-21 10:38 ` Albert ARIBAUD
0 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2013-09-21 10:38 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Thu, 19 Sep 2013 10:31:44 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> please pull the following fix into u-boot-arm/master for 2013.10 release.
>
> The following changes since commit 771f74c3d31a265bae103b2b407286ec03a4589b:
>
> arm: dma_alloc_coherent: malloc() -> memalign() (2013-09-14 12:08:00 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to db824479e64811959494e1f919c31d97fea9dc48:
>
> arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot (2013-09-19 10:26:48 +0200)
>
> ----------------------------------------------------------------
> Jens Scharsig (BuS Elektronik) (1):
> arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot
>
> include/configs/eb_cpux9k2.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2013-09-19 8:31 Andreas Bießmann
2013-09-21 10:38 ` Albert ARIBAUD
0 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2013-09-19 8:31 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
please pull the following fix into u-boot-arm/master for 2013.10 release.
The following changes since commit 771f74c3d31a265bae103b2b407286ec03a4589b:
arm: dma_alloc_coherent: malloc() -> memalign() (2013-09-14 12:08:00 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to db824479e64811959494e1f919c31d97fea9dc48:
arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot (2013-09-19 10:26:48 +0200)
----------------------------------------------------------------
Jens Scharsig (BuS Elektronik) (1):
arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot
include/configs/eb_cpux9k2.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-09-04 11:10 ` Albert ARIBAUD
@ 2013-09-04 11:49 ` Andreas Bießmann
0 siblings, 0 replies; 30+ messages in thread
From: Andreas Bießmann @ 2013-09-04 11:49 UTC (permalink / raw)
To: u-boot
Hi Albert,
On 09/04/2013 01:10 PM, Albert ARIBAUD wrote:
> Hi Andreas,
>
> On Wed, 04 Sep 2013 11:40:16 +0200, "Andreas Bie?mann"
> <andreas.devel@googlemail.com> wrote:
>
>> Hi Albert,
>>
>> can you please wait applying this? I have another 2-3 patches for this
>> release.
>
> Argh! I've pushed it already. Just give me a new PR for these 2-3
> patches, I'll take it in today.
no problem, I'll send it the next few hours (just test building)
Best regards
Andreas Bie?mann
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-09-04 9:40 ` Andreas Bießmann
@ 2013-09-04 11:10 ` Albert ARIBAUD
2013-09-04 11:49 ` Andreas Bießmann
0 siblings, 1 reply; 30+ messages in thread
From: Albert ARIBAUD @ 2013-09-04 11:10 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Wed, 04 Sep 2013 11:40:16 +0200, "Andreas Bie?mann"
<andreas.devel@googlemail.com> wrote:
> Hi Albert,
>
> can you please wait applying this? I have another 2-3 patches for this
> release.
Argh! I've pushed it already. Just give me a new PR for these 2-3
patches, I'll take it in today.
> Best regards
>
> Andreas Bie?mann
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-08-22 15:04 Andreas Bießmann
2013-09-03 2:54 ` Bo Shen
2013-09-04 9:40 ` Andreas Bießmann
@ 2013-09-04 10:30 ` Albert ARIBAUD
2 siblings, 0 replies; 30+ messages in thread
From: Albert ARIBAUD @ 2013-09-04 10:30 UTC (permalink / raw)
To: u-boot
Hi Andreas,
On Thu, 22 Aug 2013 17:04:43 +0200, Andreas Bie?mann
<andreas.devel@googlemail.com> wrote:
> Dear Albert Aribaud,
>
> The following changes since commit 9ed887caecb9ecb0c68773a1870d143b9f28d3da:
>
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17 18:24:13 +0200)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to bc6958988726977b4089da1b13f6467e8e28efd2:
>
> arm: atmel: cpux9k2: board update and enhancement (2013-08-22 16:52:40 +0200)
>
> ----------------------------------------------------------------
> Bo Shen (10):
> net: macb: fix the following building warning
> arm: atmel: add gmac support for sama5d3xek board
> arm: atmel: add nand trimffs subcommand for at91sam9n12 and at91sam9x5
> arm: sama5d3: fix smc cs related registers offset
> arm: sama5d3: remove unused define
> arm: atmel: sama5d3: fix typo error for CONFIG_ENV_IS_NOWHERE
> arm: atmel: remove the config.mk file
> gpio: atmel: fix code to use pointer for pio port
> gpio: atmel: add gpio common API support
> gpio: atmel: add copyright and remove error header info
>
> Jens Scharsig (BuS Elektronik) (1):
> arm: atmel: cpux9k2: board update and enhancement
>
> Wu, Josh (5):
> ARM: at91: atmel_nand: pmecc driver will select the galois table by sector size
> ARM: at91: sama5d3: remove unused definition about PMECC alpha table offset
> linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to compat.h
> mtd: atmel_nand: alloc memory instead of use static array for pmecc data
> ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement
>
> arch/arm/cpu/armv7/at91/sama5d3_devices.c | 24 +++
> arch/arm/include/asm/arch-at91/at91_common.h | 1 +
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 6 +
> arch/arm/include/asm/arch-at91/sama5d3.h | 2 -
> arch/arm/include/asm/arch-at91/sama5d3_smc.h | 2 +-
> board/atmel/at91sam9m10g45ek/config.mk | 1 -
> board/atmel/at91sam9x5ek/config.mk | 1 -
> board/atmel/sama5d3xek/sama5d3xek.c | 20 ++
> doc/README.atmel_pmecc | 14 --
> drivers/gpio/at91_gpio.c | 295 ++++++++++++++++----------
> drivers/mtd/nand/atmel_nand.c | 198 ++++++++++++++++-
> drivers/net/macb.c | 12 +-
> drivers/usb/musb-new/linux-compat.h | 16 --
> include/configs/at91sam9m10g45ek.h | 2 +
> include/configs/at91sam9n12ek.h | 3 +
> include/configs/at91sam9x5ek.h | 5 +-
> include/configs/eb_cpux9k2.h | 62 +++---
> include/configs/sama5d3xek.h | 10 +-
> include/linux/compat.h | 8 +
> 19 files changed, 486 insertions(+), 196 deletions(-)
> delete mode 100644 board/atmel/at91sam9m10g45ek/config.mk
> delete mode 100644 board/atmel/at91sam9x5ek/config.mk
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-08-22 15:04 Andreas Bießmann
2013-09-03 2:54 ` Bo Shen
@ 2013-09-04 9:40 ` Andreas Bießmann
2013-09-04 11:10 ` Albert ARIBAUD
2013-09-04 10:30 ` Albert ARIBAUD
2 siblings, 1 reply; 30+ messages in thread
From: Andreas Bießmann @ 2013-09-04 9:40 UTC (permalink / raw)
To: u-boot
Hi Albert,
can you please wait applying this? I have another 2-3 patches for this
release.
Best regards
Andreas Bie?mann
On 08/22/2013 05:04 PM, Andreas Bie?mann wrote:
> Dear Albert Aribaud,
>
> The following changes since commit 9ed887caecb9ecb0c68773a1870d143b9f28d3da:
>
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17 18:24:13 +0200)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to bc6958988726977b4089da1b13f6467e8e28efd2:
>
> arm: atmel: cpux9k2: board update and enhancement (2013-08-22 16:52:40 +0200)
>
> ----------------------------------------------------------------
> Bo Shen (10):
> net: macb: fix the following building warning
> arm: atmel: add gmac support for sama5d3xek board
> arm: atmel: add nand trimffs subcommand for at91sam9n12 and at91sam9x5
> arm: sama5d3: fix smc cs related registers offset
> arm: sama5d3: remove unused define
> arm: atmel: sama5d3: fix typo error for CONFIG_ENV_IS_NOWHERE
> arm: atmel: remove the config.mk file
> gpio: atmel: fix code to use pointer for pio port
> gpio: atmel: add gpio common API support
> gpio: atmel: add copyright and remove error header info
>
> Jens Scharsig (BuS Elektronik) (1):
> arm: atmel: cpux9k2: board update and enhancement
>
> Wu, Josh (5):
> ARM: at91: atmel_nand: pmecc driver will select the galois table by sector size
> ARM: at91: sama5d3: remove unused definition about PMECC alpha table offset
> linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to compat.h
> mtd: atmel_nand: alloc memory instead of use static array for pmecc data
> ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement
>
> arch/arm/cpu/armv7/at91/sama5d3_devices.c | 24 +++
> arch/arm/include/asm/arch-at91/at91_common.h | 1 +
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 6 +
> arch/arm/include/asm/arch-at91/sama5d3.h | 2 -
> arch/arm/include/asm/arch-at91/sama5d3_smc.h | 2 +-
> board/atmel/at91sam9m10g45ek/config.mk | 1 -
> board/atmel/at91sam9x5ek/config.mk | 1 -
> board/atmel/sama5d3xek/sama5d3xek.c | 20 ++
> doc/README.atmel_pmecc | 14 --
> drivers/gpio/at91_gpio.c | 295 ++++++++++++++++----------
> drivers/mtd/nand/atmel_nand.c | 198 ++++++++++++++++-
> drivers/net/macb.c | 12 +-
> drivers/usb/musb-new/linux-compat.h | 16 --
> include/configs/at91sam9m10g45ek.h | 2 +
> include/configs/at91sam9n12ek.h | 3 +
> include/configs/at91sam9x5ek.h | 5 +-
> include/configs/eb_cpux9k2.h | 62 +++---
> include/configs/sama5d3xek.h | 10 +-
> include/linux/compat.h | 8 +
> 19 files changed, 486 insertions(+), 196 deletions(-)
> delete mode 100644 board/atmel/at91sam9m10g45ek/config.mk
> delete mode 100644 board/atmel/at91sam9x5ek/config.mk
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-08-22 15:04 Andreas Bießmann
@ 2013-09-03 2:54 ` Bo Shen
2013-09-04 9:40 ` Andreas Bießmann
2013-09-04 10:30 ` Albert ARIBAUD
2 siblings, 0 replies; 30+ messages in thread
From: Bo Shen @ 2013-09-03 2:54 UTC (permalink / raw)
To: u-boot
Hi Albert Aribaud,
On 08/22/2013 11:04 PM, Andreas Bie?mann wrote:
> Dear Albert Aribaud,
>
> The following changes since commit 9ed887caecb9ecb0c68773a1870d143b9f28d3da:
>
> Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17 18:24:13 +0200)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to bc6958988726977b4089da1b13f6467e8e28efd2:
>
> arm: atmel: cpux9k2: board update and enhancement (2013-08-22 16:52:40 +0200)
Just a reminder.
I see the u-boot-2013.10-rc2 is out, however this pull request is not dealt.
Best Regards,
Bo Shen
^ permalink raw reply [flat|nested] 30+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
@ 2013-08-22 15:04 Andreas Bießmann
2013-09-03 2:54 ` Bo Shen
` (2 more replies)
0 siblings, 3 replies; 30+ messages in thread
From: Andreas Bießmann @ 2013-08-22 15:04 UTC (permalink / raw)
To: u-boot
Dear Albert Aribaud,
The following changes since commit 9ed887caecb9ecb0c68773a1870d143b9f28d3da:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17 18:24:13 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to bc6958988726977b4089da1b13f6467e8e28efd2:
arm: atmel: cpux9k2: board update and enhancement (2013-08-22 16:52:40 +0200)
----------------------------------------------------------------
Bo Shen (10):
net: macb: fix the following building warning
arm: atmel: add gmac support for sama5d3xek board
arm: atmel: add nand trimffs subcommand for at91sam9n12 and at91sam9x5
arm: sama5d3: fix smc cs related registers offset
arm: sama5d3: remove unused define
arm: atmel: sama5d3: fix typo error for CONFIG_ENV_IS_NOWHERE
arm: atmel: remove the config.mk file
gpio: atmel: fix code to use pointer for pio port
gpio: atmel: add gpio common API support
gpio: atmel: add copyright and remove error header info
Jens Scharsig (BuS Elektronik) (1):
arm: atmel: cpux9k2: board update and enhancement
Wu, Josh (5):
ARM: at91: atmel_nand: pmecc driver will select the galois table by sector size
ARM: at91: sama5d3: remove unused definition about PMECC alpha table offset
linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to compat.h
mtd: atmel_nand: alloc memory instead of use static array for pmecc data
ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirement
arch/arm/cpu/armv7/at91/sama5d3_devices.c | 24 +++
arch/arm/include/asm/arch-at91/at91_common.h | 1 +
arch/arm/include/asm/arch-at91/at91sam9x5.h | 6 +
arch/arm/include/asm/arch-at91/sama5d3.h | 2 -
arch/arm/include/asm/arch-at91/sama5d3_smc.h | 2 +-
board/atmel/at91sam9m10g45ek/config.mk | 1 -
board/atmel/at91sam9x5ek/config.mk | 1 -
board/atmel/sama5d3xek/sama5d3xek.c | 20 ++
doc/README.atmel_pmecc | 14 --
drivers/gpio/at91_gpio.c | 295 ++++++++++++++++----------
drivers/mtd/nand/atmel_nand.c | 198 ++++++++++++++++-
drivers/net/macb.c | 12 +-
drivers/usb/musb-new/linux-compat.h | 16 --
include/configs/at91sam9m10g45ek.h | 2 +
include/configs/at91sam9n12ek.h | 3 +
include/configs/at91sam9x5ek.h | 5 +-
include/configs/eb_cpux9k2.h | 62 +++---
include/configs/sama5d3xek.h | 10 +-
include/linux/compat.h | 8 +
19 files changed, 486 insertions(+), 196 deletions(-)
delete mode 100644 board/atmel/at91sam9m10g45ek/config.mk
delete mode 100644 board/atmel/at91sam9x5ek/config.mk
^ permalink raw reply [flat|nested] 30+ messages in thread
end of thread, other threads:[~2014-10-11 22:58 UTC | newest]
Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-09-04 15:15 [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master Andreas Bießmann
2013-09-05 10:16 ` Albert ARIBAUD
-- strict thread matches above, loose matches on Subject: below --
2014-10-10 20:00 Andreas Bießmann
2014-10-11 22:58 ` Albert ARIBAUD
2014-09-19 6:32 Andreas Bießmann
2014-09-21 14:56 ` Albert ARIBAUD
2014-06-14 16:19 Andreas Bießmann
2014-06-24 19:16 ` Albert ARIBAUD
2014-05-26 22:16 Andreas Bießmann
2014-05-30 17:45 ` Albert ARIBAUD
2014-03-09 18:50 Andreas Bießmann
2014-03-10 8:09 ` Albert ARIBAUD
2013-12-17 16:25 Andreas Bießmann
2013-12-18 16:47 ` Albert ARIBAUD
2013-12-09 12:42 Andreas Bießmann
2013-12-09 17:56 ` Albert ARIBAUD
2013-12-01 21:50 Andreas Bießmann
2013-12-02 15:51 ` Albert ARIBAUD
2013-11-13 21:24 Andreas Bießmann
2013-11-22 6:35 ` Albert ARIBAUD
2013-11-04 19:43 Andreas Bießmann
2013-11-05 21:30 ` Albert ARIBAUD
2013-09-19 8:31 Andreas Bießmann
2013-09-21 10:38 ` Albert ARIBAUD
2013-08-22 15:04 Andreas Bießmann
2013-09-03 2:54 ` Bo Shen
2013-09-04 9:40 ` Andreas Bießmann
2013-09-04 11:10 ` Albert ARIBAUD
2013-09-04 11:49 ` Andreas Bießmann
2013-09-04 10:30 ` Albert ARIBAUD
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.