* [U-Boot] [PATCH v9 0/5] arm64 patch
@ 2013-09-13 8:38 fenghua at phytium.com.cn
2013-09-13 8:38 ` [U-Boot] [PATCH v9 1/5] core support of arm64 fenghua at phytium.com.cn
2013-09-13 16:00 ` [U-Boot] [PATCH v9 0/5] arm64 patch Wolfgang Denk
0 siblings, 2 replies; 9+ messages in thread
From: fenghua at phytium.com.cn @ 2013-09-13 8:38 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
The porting has been merged with arm architecture.
Most architecture codes are placed in
arch/arm/cpu/armv8 directory. Generic board is also
supported after a few bugs are fixed.
u-boot could be running at EL1 or EL2.
Changes for v8:
- add Signed-off-by information to patch "board support of
vexpress_aemv8a" which SMC91111 support is integrated
from Sharma Bhupesh's patch.
- adjust pt_regs struct and add exception state
preservation in exception.S.
Changes for v7:
- Integrate SMC91111 patch of sharma bhupesh.
- remove v8_outer_cache* which is not need currently.
- Change license tag.
- Mov crt0.S/relocate.S/interrupts.c to arm/lib and
rename them with _64 suffix.
- Make el3/el2 initializing process of start.S as
two separate routines. It could be easier to be
replaced with processor specific codes.
- Remove exception stack save and restore routine,
it is unnecessary now.
- simplify __weak function declaration.
Changes for v6:
- Check the patches with checkpatch.pl and get rid of
almost all warnings. There are a few warnings still,
but I think it should be that.
- change printf format in cmd_pxe.c, use %zd indtead
of %ld to format size_t type variable.
- add macro PGTABLE_SIZE to identify tlb table size.
Changes for v5:
- Make modification to inappropriate licensed file
and bugs according to ScottWood's advice.
Thanks Scott for his checking to these patches.
- Enable u-boot's running at EL1.
- Get rid of compiling warnings originated from cmd_pxe.c.
Changes for v4:
- fix the generic board_f.c, remove zero_global_data
from init_sequence_f array and move it to board_init_f()
function with CONFIG_X86 switch. The previous fixup is
inaccurate.
- Replace __ARMEB__ with __AARCH64EB__ in byteorder.h
and unaligned.h, gcc for aarch64 use __AARCH64EB__ and
__AARCH64EL__ to identify endian.
- Some modification to README.armv8
Changes for v3:
- merge arm64 to arm architecture.
David Feng (5):
core support of arm64
board support of vexpress_aemv8a
generic board patch of manual reloc and zero gd_t
64bit initrd start address support
remove compiling warnings
MAINTAINERS | 4 +
arch/arm/config.mk | 4 +
arch/arm/cpu/armv8/Makefile | 38 +++
arch/arm/cpu/armv8/cache.S | 130 +++++++++
arch/arm/cpu/armv8/cache_v8.c | 228 ++++++++++++++++
arch/arm/cpu/armv8/config.mk | 16 ++
arch/arm/cpu/armv8/cpu.c | 67 +++++
arch/arm/cpu/armv8/exceptions.S | 115 ++++++++
arch/arm/cpu/armv8/start.S | 236 +++++++++++++++++
arch/arm/cpu/armv8/timer.c | 80 ++++++
arch/arm/cpu/armv8/tlb.S | 30 +++
arch/arm/cpu/armv8/u-boot.lds | 71 +++++
arch/arm/include/asm/arch-armv8/gpio.h | 11 +
arch/arm/include/asm/arch-armv8/mmu.h | 106 ++++++++
arch/arm/include/asm/byteorder.h | 12 +
arch/arm/include/asm/cache.h | 5 +
arch/arm/include/asm/config.h | 10 +
arch/arm/include/asm/global_data.h | 6 +-
arch/arm/include/asm/io.h | 15 +-
arch/arm/include/asm/macro.h | 20 ++
arch/arm/include/asm/posix_types.h | 10 +
arch/arm/include/asm/proc-armv/ptrace.h | 21 ++
arch/arm/include/asm/proc-armv/system.h | 59 ++++-
arch/arm/include/asm/system.h | 77 ++++++
arch/arm/include/asm/types.h | 4 +
arch/arm/include/asm/u-boot.h | 4 +
arch/arm/include/asm/unaligned.h | 2 +-
arch/arm/lib/Makefile | 14 +
arch/arm/lib/board.c | 16 +-
arch/arm/lib/bootm.c | 16 ++
arch/arm/lib/crt0_64.S | 116 ++++++++
arch/arm/lib/interrupts_64.c | 120 +++++++++
arch/arm/lib/relocate_64.S | 57 ++++
board/armltd/dts/vexpress64.dts | 439 +++++++++++++++++++++++++++++++
board/armltd/vexpress64/Makefile | 27 ++
board/armltd/vexpress64/vexpress64.c | 70 +++++
boards.cfg | 1 +
common/board_f.c | 19 +-
common/board_r.c | 18 ++
common/cmd_pxe.c | 4 +-
common/fdt_support.c | 66 ++---
common/image.c | 1 +
doc/README.armv8 | 18 ++
examples/standalone/stubs.c | 15 ++
include/configs/vexpress_aemv8a.h | 193 ++++++++++++++
include/image.h | 1 +
46 files changed, 2540 insertions(+), 52 deletions(-)
create mode 100644 arch/arm/cpu/armv8/Makefile
create mode 100644 arch/arm/cpu/armv8/cache.S
create mode 100644 arch/arm/cpu/armv8/cache_v8.c
create mode 100644 arch/arm/cpu/armv8/config.mk
create mode 100644 arch/arm/cpu/armv8/cpu.c
create mode 100644 arch/arm/cpu/armv8/exceptions.S
create mode 100644 arch/arm/cpu/armv8/start.S
create mode 100644 arch/arm/cpu/armv8/timer.c
create mode 100644 arch/arm/cpu/armv8/tlb.S
create mode 100644 arch/arm/cpu/armv8/u-boot.lds
create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
create mode 100644 arch/arm/lib/crt0_64.S
create mode 100644 arch/arm/lib/interrupts_64.c
create mode 100644 arch/arm/lib/relocate_64.S
create mode 100644 board/armltd/dts/vexpress64.dts
create mode 100644 board/armltd/vexpress64/Makefile
create mode 100644 board/armltd/vexpress64/vexpress64.c
create mode 100644 doc/README.armv8
create mode 100644 include/configs/vexpress_aemv8a.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v9 1/5] core support of arm64
2013-09-13 8:38 [U-Boot] [PATCH v9 0/5] arm64 patch fenghua at phytium.com.cn
@ 2013-09-13 8:38 ` fenghua at phytium.com.cn
2013-09-13 8:38 ` [U-Boot] [PATCH v9 2/5] board support of vexpress_aemv8a fenghua at phytium.com.cn
2013-09-13 16:00 ` [U-Boot] [PATCH v9 0/5] arm64 patch Wolfgang Denk
1 sibling, 1 reply; 9+ messages in thread
From: fenghua at phytium.com.cn @ 2013-09-13 8:38 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
arch/arm/config.mk | 4 +
arch/arm/cpu/armv8/Makefile | 38 +++++
arch/arm/cpu/armv8/cache.S | 130 +++++++++++++++++
arch/arm/cpu/armv8/cache_v8.c | 228 +++++++++++++++++++++++++++++
arch/arm/cpu/armv8/config.mk | 16 +++
arch/arm/cpu/armv8/cpu.c | 67 +++++++++
arch/arm/cpu/armv8/exceptions.S | 115 +++++++++++++++
arch/arm/cpu/armv8/start.S | 236 +++++++++++++++++++++++++++++++
arch/arm/cpu/armv8/timer.c | 80 +++++++++++
arch/arm/cpu/armv8/tlb.S | 30 ++++
arch/arm/cpu/armv8/u-boot.lds | 71 ++++++++++
arch/arm/include/asm/arch-armv8/gpio.h | 11 ++
arch/arm/include/asm/arch-armv8/mmu.h | 106 ++++++++++++++
arch/arm/include/asm/byteorder.h | 12 ++
arch/arm/include/asm/cache.h | 5 +
arch/arm/include/asm/config.h | 10 ++
arch/arm/include/asm/global_data.h | 6 +-
arch/arm/include/asm/io.h | 15 +-
arch/arm/include/asm/macro.h | 20 +++
arch/arm/include/asm/posix_types.h | 10 ++
arch/arm/include/asm/proc-armv/ptrace.h | 21 +++
arch/arm/include/asm/proc-armv/system.h | 59 +++++++-
arch/arm/include/asm/system.h | 77 ++++++++++
arch/arm/include/asm/types.h | 4 +
arch/arm/include/asm/u-boot.h | 4 +
arch/arm/include/asm/unaligned.h | 2 +-
arch/arm/lib/Makefile | 14 ++
arch/arm/lib/board.c | 16 ++-
arch/arm/lib/bootm.c | 16 +++
arch/arm/lib/crt0_64.S | 116 +++++++++++++++
arch/arm/lib/interrupts_64.c | 120 ++++++++++++++++
arch/arm/lib/relocate_64.S | 57 ++++++++
common/image.c | 1 +
doc/README.armv8 | 18 +++
examples/standalone/stubs.c | 15 ++
include/image.h | 1 +
36 files changed, 1741 insertions(+), 10 deletions(-)
create mode 100644 arch/arm/cpu/armv8/Makefile
create mode 100644 arch/arm/cpu/armv8/cache.S
create mode 100644 arch/arm/cpu/armv8/cache_v8.c
create mode 100644 arch/arm/cpu/armv8/config.mk
create mode 100644 arch/arm/cpu/armv8/cpu.c
create mode 100644 arch/arm/cpu/armv8/exceptions.S
create mode 100644 arch/arm/cpu/armv8/start.S
create mode 100644 arch/arm/cpu/armv8/timer.c
create mode 100644 arch/arm/cpu/armv8/tlb.S
create mode 100644 arch/arm/cpu/armv8/u-boot.lds
create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
create mode 100644 arch/arm/lib/crt0_64.S
create mode 100644 arch/arm/lib/interrupts_64.c
create mode 100644 arch/arm/lib/relocate_64.S
create mode 100644 doc/README.armv8
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index ce3903b..f1c6a7b 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -74,7 +74,9 @@ endif
endif
# needed for relocation
+ifndef CONFIG_ARMV8
LDFLAGS_u-boot += -pie
+endif
#
# FIXME: binutils versions < 2.22 have a bug in the assembler where
@@ -95,6 +97,8 @@ endif
endif
# check that only R_ARM_RELATIVE relocations are generated
+ifndef CONFIG_ARMV8
ifneq ($(CONFIG_SPL_BUILD),y)
ALL-y += checkarmreloc
endif
+endif
diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile
new file mode 100644
index 0000000..b216f27
--- /dev/null
+++ b/arch/arm/cpu/armv8/Makefile
@@ -0,0 +1,38 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).o
+
+START := start.o
+
+COBJS += cpu.o
+COBJS += timer.o
+COBJS += cache_v8.o
+
+SOBJS += exceptions.o
+SOBJS += cache.o
+SOBJS += tlb.o
+
+SRCS := $(START:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S
new file mode 100644
index 0000000..419f169
--- /dev/null
+++ b/arch/arm/cpu/armv8/cache.S
@@ -0,0 +1,130 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * void __asm_flush_dcache_level(level)
+ *
+ * clean and invalidate one level cache.
+ *
+ * x0: cache level
+ * x1~x9: clobbered
+ */
+ENTRY(__asm_flush_dcache_level)
+ lsl x1, x0, #1
+ msr csselr_el1, x1 /* select cache level */
+ isb /* isb to sych the new cssr & csidr */
+ mrs x6, ccsidr_el1 /* read the new ccsidr */
+ and x2, x6, #7 /* x2 <- length of the cache lines */
+ add x2, x2, #4 /* add 4 (line length offset) */
+ mov x3, #0x3ff
+ and x3, x3, x6, lsr #3 /* x3 <- maximum number of way size */
+ clz w5, w3 /* bit position of way size */
+ mov x4, #0x7fff
+ and x4, x4, x1, lsr #13 /* x4 <- max number of the set size */
+ /* x1 <- cache level << 1 */
+ /* x2 <- line length offset */
+ /* x3 <- number of cache ways */
+ /* x4 <- number of cache sets */
+ /* x5 <- bit position of way size */
+
+loop_set:
+ mov x6, x3 /* create working copy of way size */
+loop_way:
+ lsl x7, x6, x5
+ orr x9, x0, x7 /* map way and level to cisw value */
+ lsl x7, x4, x2
+ orr x9, x9, x7 /* map set number to cisw value */
+ dc cisw, x9 /* clean & invalidate by set/way */
+ subs x6, x6, #1 /* decrement the way */
+ b.ge loop_way
+ subs x4, x4, #1 /* decrement the set */
+ b.ge loop_set
+
+ ret
+ENDPROC(__asm_flush_dcache_level)
+
+/*
+ * void __asm_flush_dcache_all(void)
+ *
+ * clean and invalidate all data cache by SET/WAY.
+ */
+ENTRY(__asm_flush_dcache_all)
+ dsb sy
+ mov x15, lr
+ mrs x10, clidr_el1 /* read clidr */
+ lsr x11, x10, #24
+ and x11, x11, #0x7 /* x11 <- loc */
+ cbz x11, finished /* if loc is 0, no need to clean */
+ mov x0, #0 /* start flush at cache level 0 */
+ /* x0 <- cache level */
+ /* x10 <- clidr_el1 */
+ /* x11 <- loc */
+
+loop_level:
+ lsl x1, x0, #1
+ add x1, x1, x0 /* x0 <- 3x cache level */
+ lsr x1, x10, x1
+ and x1, x1, #7 /* x1 <- cache type */
+ cmp x1, #2
+ b.lt skip /* skip if no cache or icache */
+ bl __asm_flush_dcache_level
+skip:
+ add x0, x0, #1 /* increment cache level */
+ cmp x11, x0
+ b.gt loop_level
+
+finished:
+ mov x0, #0
+ msr csselr_el1, x0 /* swith back to cache level 0 */
+ dsb sy
+ isb
+ mov lr, x15
+ ret
+ENDPROC(__asm_flush_dcache_all)
+
+/*
+ * void __asm_flush_dcache_range(start, end)
+ *
+ * clean & invalidate data cache in the range
+ *
+ * x0: start address
+ * x1: end address
+ */
+ENTRY(__asm_flush_dcache_range)
+ mrs x3, ctr_el0 /* read CTR */
+ lsr x3, x3, #16
+ and x3, x3, #0xf /* cache line size encoding */
+ mov x2, #4 /* bytes per word */
+ lsl x2, x2, x3 /* actual cache line size */
+
+ /* x2 <- minimal cache line size in cache system */
+ sub x3, x2, #1
+ bic x0, x0, x3
+1: dc civac, x0 /* clean & invalidate D/unified line */
+ add x0, x0, x2
+ cmp x0, x1
+ b.lo 1b
+ dsb sy
+ ret
+ENDPROC(__asm_flush_dcache_range)
+
+/*
+ * void __asm_invalidate_icache_all(void)
+ *
+ * invalidate all tlb entries.
+ */
+ENTRY(__asm_invalidate_icache_all)
+ ic ialluis
+ isb sy
+ ret
+ENDPROC(__asm_invalidate_icache_all)
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
new file mode 100644
index 0000000..89813ec
--- /dev/null
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -0,0 +1,228 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/system.h>
+#include <asm/arch/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+
+static void set_pgtable_section(u64 section, u64 memory_type)
+{
+ u64 *page_table = (u64 *)gd->arch.tlb_addr;
+ u64 value;
+
+ value = (section << SECTION_SHIFT) | PMD_TYPE_SECT | PMD_SECT_AF;
+ value |= PMD_ATTRINDX(memory_type);
+ page_table[section] = value;
+}
+
+/* to activate the MMU we need to set up virtual memory */
+static inline void mmu_setup(void)
+{
+ int i, j, el;
+ bd_t *bd = gd->bd;
+
+ /* Setup an identity-mapping for all spaces */
+ for (i = 0; i < (PAGE_SIZE >> 3); i++)
+ set_pgtable_section(i, MT_DEVICE_NGNRNE);
+
+ /* Setup an identity-mapping for all RAM space */
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ ulong start = bd->bi_dram[i].start;
+ ulong end = bd->bi_dram[i].start + bd->bi_dram[i].size;
+ for (j = start >> SECTION_SHIFT;
+ j < end >> SECTION_SHIFT; j++) {
+ set_pgtable_section(j, MT_NORMAL);
+ }
+ }
+
+ /* load TTBR0 */
+ el = curent_el();
+ if (el == 1)
+ asm volatile("msr ttbr0_el1, %0"
+ : : "r" (gd->arch.tlb_addr) : "memory");
+ else if (el == 2)
+ asm volatile("msr ttbr0_el2, %0"
+ : : "r" (gd->arch.tlb_addr) : "memory");
+ else
+ panic("Not Supported Exception Level");
+
+ /* enable the mmu */
+ set_sctlr(get_sctlr() | CR_M);
+}
+
+/*
+ * Performs a invalidation of the entire data cache
+ * at all levels
+ */
+void invalidate_dcache_all(void)
+{
+ __asm_flush_dcache_all();
+}
+
+/*
+ * Performs a clean & invalidation of the entire data cache
+ * at all levels
+ */
+void flush_dcache_all(void)
+{
+ __asm_flush_dcache_all();
+}
+
+/*
+ * Invalidates range in all levels of D-cache/unified cache used:
+ * Affects the range [start, stop - 1]
+ */
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+ __asm_flush_dcache_range(start, stop);
+}
+
+/*
+ * Flush range(clean & invalidate) from all levels of D-cache/unified
+ * cache used:
+ * Affects the range [start, stop - 1]
+ */
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+ __asm_flush_dcache_range(start, stop);
+}
+
+void dcache_enable(void)
+{
+ uint32_t sctlr;
+
+ sctlr = get_sctlr();
+
+ /* The data cache is not active unless the mmu is enabled too */
+ if (!(sctlr & CR_M)) {
+ invalidate_dcache_all();
+ __asm_invalidate_tlb_all();
+ mmu_setup();
+ }
+
+ set_sctlr(sctlr | CR_C);
+}
+
+void dcache_disable(void)
+{
+ uint32_t sctlr;
+
+ sctlr = get_sctlr();
+
+ /* if cache isn't enabled no need to disable */
+ if (!(sctlr & CR_C))
+ return;
+
+ set_sctlr(sctlr & ~(CR_C|CR_M));
+
+ flush_dcache_all();
+ __asm_invalidate_tlb_all();
+}
+
+int dcache_status(void)
+{
+ return (get_sctlr() & CR_C) != 0;
+}
+
+#else /* CONFIG_SYS_DCACHE_OFF */
+
+void invalidate_dcache_all(void)
+{
+}
+
+void flush_dcache_all(void)
+{
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void dcache_enable(void)
+{
+}
+
+void dcache_disable(void)
+{
+}
+
+int dcache_status(void)
+{
+ return 0;
+}
+
+#endif /* CONFIG_SYS_DCACHE_OFF */
+
+#ifndef CONFIG_SYS_ICACHE_OFF
+
+void icache_enable(void)
+{
+ set_sctlr(get_sctlr() | CR_I);
+}
+
+void icache_disable(void)
+{
+ set_sctlr(get_sctlr() & ~CR_I);
+}
+
+int icache_status(void)
+{
+ return (get_sctlr() & CR_I) != 0;
+}
+
+void invalidate_icache_all(void)
+{
+ __asm_invalidate_icache_all();
+}
+
+#else /* CONFIG_SYS_ICACHE_OFF */
+
+void icache_enable(void)
+{
+}
+
+void icache_disable(void)
+{
+}
+
+int icache_status(void)
+{
+ return 0;
+}
+
+void invalidate_icache_all(void)
+{
+}
+
+#endif /* CONFIG_SYS_ICACHE_OFF */
+
+/*
+ * Enable dCache & iCache, whether cache is actually enabled
+ * depend on CONFIG_SYS_DCACHE_OFF and CONFIG_SYS_ICACHE_OFF
+ */
+void enable_caches(void)
+{
+ icache_enable();
+ dcache_enable();
+}
+
+/*
+ * Flush range from all levels of d-cache/unified-cache used:
+ * Affects the range [start, start + size - 1]
+ */
+void flush_cache(unsigned long start, unsigned long size)
+{
+ flush_dcache_range(start, start + size);
+}
diff --git a/arch/arm/cpu/armv8/config.mk b/arch/arm/cpu/armv8/config.mk
new file mode 100644
index 0000000..9f36d59
--- /dev/null
+++ b/arch/arm/cpu/armv8/config.mk
@@ -0,0 +1,16 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+PLATFORM_RELFLAGS += -fno-common -ffixed-x18
+
+# SEE README.arm-unaligned-accesses
+PF_NO_UNALIGNED := $(call cc-option, -mstrict-align)
+PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
+
+PF_CPPFLAGS_ARMV8 := $(call cc-option, -march=armv8-a)
+PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV8)
+PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
+PLATFORM_CPPFLAGS += -fpic
diff --git a/arch/arm/cpu/armv8/cpu.c b/arch/arm/cpu/armv8/cpu.c
new file mode 100644
index 0000000..83e73ab
--- /dev/null
+++ b/arch/arm/cpu/armv8/cpu.c
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2008 Texas Insturments
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/system.h>
+#include <linux/compiler.h>
+
+void __weak cpu_cache_initialization(void){}
+
+int cleanup_before_linux(void)
+{
+ /*
+ * this function is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we turn off caches etc ...
+ */
+#ifndef CONFIG_SPL_BUILD
+ disable_interrupts();
+#endif
+
+ /*
+ * Turn off I-cache and invalidate it
+ */
+ icache_disable();
+ invalidate_icache_all();
+
+ /*
+ * turn off D-cache
+ * dcache_disable() in turn flushes the d-cache and disables MMU
+ */
+ dcache_disable();
+
+ /*
+ * After D-cache is flushed and before it is disabled there may
+ * be some new valid entries brought into the cache. We are sure
+ * that these lines are not dirty and will not affect our execution.
+ * (because unwinding the call-stack and setting a bit in CP15 SCTRL
+ * is all we did during this. We have not pushed anything on to the
+ * stack. Neither have we affected any static data)
+ * So just invalidate the entire d-cache again to avoid coherency
+ * problems for kernel
+ */
+ invalidate_dcache_all();
+
+ /*
+ * Some CPU need more cache attention before starting the kernel.
+ */
+ cpu_cache_initialization();
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv8/exceptions.S b/arch/arm/cpu/armv8/exceptions.S
new file mode 100644
index 0000000..b2f62c9
--- /dev/null
+++ b/arch/arm/cpu/armv8/exceptions.S
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <asm/ptrace.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * Enter Exception.
+ * This will save the processor state that is ELR/X0~X30
+ * to the stack frame.
+ */
+.macro exception_entry
+ stp x29, x30, [sp, #-16]!
+ stp x27, x28, [sp, #-16]!
+ stp x25, x26, [sp, #-16]!
+ stp x23, x24, [sp, #-16]!
+ stp x21, x22, [sp, #-16]!
+ stp x19, x20, [sp, #-16]!
+ stp x17, x18, [sp, #-16]!
+ stp x15, x16, [sp, #-16]!
+ stp x13, x14, [sp, #-16]!
+ stp x11, x12, [sp, #-16]!
+ stp x9, x10, [sp, #-16]!
+ stp x7, x8, [sp, #-16]!
+ stp x5, x6, [sp, #-16]!
+ stp x3, x4, [sp, #-16]!
+ stp x1, x2, [sp, #-16]!
+
+ /* Could be running at EL1 or EL2 */
+ mrs x11, CurrentEL
+ cmp x11, 0x4
+ b.eq 1f
+ cmp x11, 0x8
+ b.eq 2f
+ b 3f
+1: mrs x1, esr_el1
+ mrs x2, elr_el1
+ b 3f
+2: mrs x1, esr_el2
+ mrs x2, elr_el2
+3:
+ stp x2, x0, [sp, #-16]!
+ mov x0, sp
+.endm
+
+/*
+ * Exception vectors.
+ */
+ .align 11
+ .globl vectors
+vectors:
+ .align 7
+ b _do_bad_sync /* Current EL Synchronous Thread */
+
+ .align 7
+ b _do_bad_irq /* Current EL IRQ Thread */
+
+ .align 7
+ b _do_bad_fiq /* Current EL FIQ Thread */
+
+ .align 7
+ b _do_bad_error /* Current EL Error Thread */
+
+ .align 7
+ b _do_sync /* Current EL Synchronous Handler */
+
+ .align 7
+ b _do_irq /* Current EL IRQ Handler */
+
+ .align 7
+ b _do_fiq /* Current EL FIQ Handler */
+
+ .align 7
+ b _do_error /* Current EL Error Handler */
+
+
+_do_bad_sync:
+ exception_entry
+ bl do_bad_sync
+
+_do_bad_irq:
+ exception_entry
+ bl do_bad_irq
+
+_do_bad_fiq:
+ exception_entry
+ bl do_bad_fiq
+
+_do_bad_error:
+ exception_entry
+ bl do_bad_error
+
+_do_sync:
+ exception_entry
+ bl do_sync
+
+_do_irq:
+ exception_entry
+ bl do_irq
+
+_do_fiq:
+ exception_entry
+ bl do_fiq
+
+_do_error:
+ exception_entry
+ bl do_error
diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
new file mode 100644
index 0000000..ea6b133
--- /dev/null
+++ b/arch/arm/cpu/armv8/start.S
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+#include <asm/arch/mmu.h>
+
+/*************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ *************************************************************************/
+
+.globl _start
+_start:
+ b reset
+
+ .align 3
+
+.globl _TEXT_BASE
+_TEXT_BASE:
+ .quad CONFIG_SYS_TEXT_BASE
+
+/*
+ * These are defined in the linker script.
+ */
+.globl _end_ofs
+_end_ofs:
+ .quad _end - _start
+
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .quad __bss_start - _start
+
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .quad __bss_end - _start
+
+reset:
+ /*
+ * Could be EL3/EL2/EL1
+ */
+ mrs x0, CurrentEL
+ cmp x0, #0xc
+ b.ne reset_nonsecure /* Not EL3 */
+
+ bl setup_el3 /* EL3 initialization */
+
+ /*
+ * MMU Disabled, iCache Disabled, dCache Disabled
+ */
+reset_nonsecure:
+
+#ifdef CONFIG_BOOTING_EL1
+ switch_el1_el2 x0, 1f, 2f, 3f
+1: b 3f
+2: bl setup_el2 /* EL2 initialization */
+3:
+#endif
+
+ /* Initialize vBAR/CPACR_EL1/MDSCR_EL1 */
+ adr x0, vectors
+ switch_el1_el2 x1, 1f, 2f, 3f
+1: msr vbar_el1, x0
+ mov x0, #3 << 20
+ msr cpacr_el1, x0 /* Enable FP/SIMD */
+ msr mdscr_el1, xzr
+ b 3f
+2: msr vbar_el2, x0
+3:
+
+ /* Cache/BPB/TLB Invalidate */
+ bl __asm_flush_dcache_all /* dCache invalidate */
+ bl __asm_invalidate_icache_all /* iCache invalidate */
+ bl __asm_invalidate_tlb_all /* invalidate I + D TLBs */
+
+ /* Processor specific initialisation */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ bl lowlevel_init
+#endif
+
+ mrs x0, mpidr_el1
+ tst x0, #15
+ b.eq master_cpu
+
+ /*
+ * Slave CPUs
+ */
+slave_cpu:
+ wfe
+ ldr x1, =SECONDARY_CPU_MAILBOX
+ ldr x0, [x1]
+ cbz x0, slave_cpu
+ br x0 /* branch to the given address */
+
+ /*
+ * Master CPU
+ */
+master_cpu:
+ bl _main
+
+/*-------------------------------------------------------------------------*/
+
+ENTRY(setup_el3)
+ mov x0, #0x531 /* Non-secure EL0/EL1 | HVC | 64bit EL2 */
+ msr scr_el3, x0
+ msr cptr_el3, xzr /* Disable coprocessor traps to EL3 */
+
+ /* GIC initialization */
+ mrs x0, mpidr_el1
+ tst x0, #0xf
+ b.ne 2f
+
+ /* Master initialize distributor */
+ ldr x1, =GIC_DIST_BASE /* GICD_CTLR */
+ mov w0, #0x3 /* Enable Group0 & Group1 */
+ str w0, [x1]
+ ldr w0, [x1, #0x4] /* GICD_TYPER */
+ and w2, w0, #0x1f /* ITLinesNumber */
+ add w2, w2, #0x1 /* Number of GICD_IGROUPR registers */
+ add x1, x1, #0x80 /* GICD_IGROUPR */
+ mov w0, #~0 /* All Group1 */
+1: str w0, [x1], #0x4
+ sub w2, w2, #0x1
+ cbnz w2, 1b
+ b 3f
+
+ /* Slave initialize distributor */
+2: ldr x1, =GIC_DIST_BASE /* GICD_CTLR */
+ mov w0, #~0 /* All Group1 */
+ str w0, [x1, #0x80]
+
+ /* Initialize cpu interface */
+3: ldr x1, =GIC_CPU_BASE /* GICC_CTLR */
+ mov w0, #0x3 /* Enable Group0 & Group1 */
+ str w0, [x1]
+
+ mov w0, #0x1 << 7 /* Non-Secure access to GICC_PMR */
+ str w0, [x1, #0x4] /* GICC_PMR */
+
+ /* Counter frequency initialization */
+ ldr x0, =CONFIG_SYS_CNTFRQ
+ msr cntfrq_el0, x0
+
+ /* SCTLR_EL2 initialization */
+ msr sctlr_el2, xzr
+
+ /* Return to the EL2_SP2 mode from EL3 */
+ mov x0, #0x3c9 /* EL2_SP2 | D | A | I | F */
+ msr elr_el3, lr
+ msr spsr_el3, x0
+ eret
+ENDPROC(setup_el3)
+
+ENTRY(setup_el2)
+ /* Initialize Generic Timers */
+ mrs x0, cnthctl_el2
+ orr x0, x0, #0x3 /* Enable EL1 access to timers */
+ msr cnthctl_el2, x0
+ msr cntvoff_el2, x0 /* Clear virtual offset */
+ mrs x0, cntkctl_el1
+ orr x0, x0, #0x3 /* EL0 access to counters */
+ msr cntkctl_el1, x0
+
+ /* Initilize MPID/MPIDR registers */
+ mrs x0, midr_el1
+ mrs x1, mpidr_el1
+ msr vpidr_el2, x0
+ msr vmpidr_el2, x1
+
+ /* Disable coprocessor traps */
+ mov x0, #0x33ff
+ msr cptr_el2, x0 /* Disable coprocessor traps to EL2 */
+ msr hstr_el2, xzr /* Disable CP15 traps to EL2 */
+
+ /* Initialize HCR_EL2 */
+ mov x0, #(1 << 31) /* Set EL1 to be 64bit */
+ orr x0, x0, #(1 << 29) /* Disable HVC */
+ msr hcr_el2, x0
+
+ /* SCTLR_EL1 initialization */
+ mov x0, #0x0800
+ movk x0, #0x30d0, lsl #16
+ msr sctlr_el1, x0
+
+ /* Return to the EL1_SP1 mode from EL2 */
+ mov x0, #0x3c5 /* EL1_SP1 | D | A | I | F */
+ msr elr_el2, lr
+ msr spsr_el2, x0
+ eret
+ENDPROC(setup_el2)
+
+/*-------------------------------------------------------------------------*/
+
+ENTRY(c_runtime_cpu_setup)
+ /* If I-cache is enabled invalidate it */
+#ifndef CONFIG_SYS_ICACHE_OFF
+ ic iallu /* I+BTB cache invalidate */
+ isb sy
+#endif
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+ /*
+ * Setup MAIR and TCR. Using 512GB address range.
+ */
+ ldr x0, =MEMORY_ATTRIBUTES
+ ldr x1, =TCR_T0SZ(VA_BITS) | TCR_FLAGS | TCR_TG0_64K
+
+ switch_el1_el2 x2, 1f, 2f, 3f
+1: orr x1, x1, TCR_EL1_IPS_40BIT
+ msr mair_el1, x0
+ msr tcr_el1, x1
+ b 3f
+2: orr x1, x1, TCR_EL2_IPS_40BIT
+ msr mair_el2, x0
+ msr tcr_el2, x1
+3:
+#endif
+
+ /* Relocate vBAR */
+ adr x0, vectors
+ switch_el1_el2 x1, 1f, 2f, 3f
+1: msr vbar_el1, x0
+ b 3f
+2: msr vbar_el2, x0
+3:
+
+ ret
+ENDPROC(c_runtime_cpu_setup)
diff --git a/arch/arm/cpu/armv8/timer.c b/arch/arm/cpu/armv8/timer.c
new file mode 100644
index 0000000..9605e84
--- /dev/null
+++ b/arch/arm/cpu/armv8/timer.c
@@ -0,0 +1,80 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <linux/compiler.h>
+
+/*
+ * Genertic Timer implementation of __udelay/get_timer/get_ticks/get_tbclk
+ * functions. If any other timers used, another implementation should be
+ * placed in platform code.
+ */
+
+static inline u64 get_cntfrq(void)
+{
+ u64 cntfrq;
+ asm volatile("mrs %0, cntfrq_el0" : "=r" (cntfrq));
+ return cntfrq;
+}
+
+static inline u64 tick_to_time(u64 tick)
+{
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, get_cntfrq());
+ return tick;
+}
+
+static inline u64 time_to_tick(u64 time)
+{
+ time *= get_cntfrq();
+ do_div(time, CONFIG_SYS_HZ);
+ return time;
+}
+
+/*
+ * Generic timer implementation of get_tbclk()
+ */
+ulong __weak get_tbclk(void)
+{
+ return CONFIG_SYS_HZ;
+}
+
+/*
+ * Generic timer implementation of get_timer()
+ */
+ulong __weak get_timer(ulong base)
+{
+ u64 cval;
+
+ isb();
+ asm volatile("mrs %0, cntpct_el0" : "=r" (cval));
+
+ return tick_to_time(cval) - base;
+}
+
+/*
+ * Generic timer implementation of get_ticks()
+ */
+unsigned long long __weak get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * Generic timer implementation of __udelay()
+ */
+void __weak __udelay(ulong usec)
+{
+ unsigned long ticks, limit;
+
+ limit = get_ticks() + usec/1000;
+
+ do {
+ ticks = get_ticks();
+ } while (ticks < limit);
+}
diff --git a/arch/arm/cpu/armv8/tlb.S b/arch/arm/cpu/armv8/tlb.S
new file mode 100644
index 0000000..6bb1e1f
--- /dev/null
+++ b/arch/arm/cpu/armv8/tlb.S
@@ -0,0 +1,30 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+/*
+ * void __asm_invalidate_tlb_all(void)
+ *
+ * invalidate all tlb entries.
+ */
+ENTRY(__asm_invalidate_tlb_all)
+ switch_el1_el2 x9, 1f, 2f, 3f
+1: tlbi vmalle1
+ dsb sy
+ isb
+ b 3f
+2: tlbi alle2
+ dsb sy
+ isb
+3:
+ ret
+ENDPROC(__asm_invalidate_tlb_all)
diff --git a/arch/arm/cpu/armv8/u-boot.lds b/arch/arm/cpu/armv8/u-boot.lds
new file mode 100644
index 0000000..328d477
--- /dev/null
+++ b/arch/arm/cpu/armv8/u-boot.lds
@@ -0,0 +1,71 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(8);
+ .text :
+ {
+ *(.__image_copy_start)
+ CPUDIR/start.o (.text*)
+ *(.text*)
+ }
+
+ . = ALIGN(8);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(8);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(8);
+
+ . = .;
+
+ . = ALIGN(8);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ }
+
+ . = ALIGN(8);
+ .reloc : {
+ __rel_got_start = .;
+ *(.got)
+ __rel_got_end = .;
+ }
+
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
+
+ _end = .;
+
+ . = ALIGN(8);
+ .bss : {
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(8);
+ __bss_end = .;
+ }
+
+ /DISCARD/ : { *(.dynsym) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
diff --git a/arch/arm/include/asm/arch-armv8/gpio.h b/arch/arm/include/asm/arch-armv8/gpio.h
new file mode 100644
index 0000000..afe7ece
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv8/gpio.h
@@ -0,0 +1,11 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV8_GPIO_H_
+#define _ASM_ARMV8_GPIO_H_
+
+#endif /* _ASM_ARMV8_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-armv8/mmu.h b/arch/arm/include/asm/arch-armv8/mmu.h
new file mode 100644
index 0000000..6c58711
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv8/mmu.h
@@ -0,0 +1,106 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV8_MMU_H_
+#define _ASM_ARMV8_MMU_H_
+
+#ifdef __ASSEMBLY__
+#define _AC(X, Y) X
+#else
+#define _AC(X, Y) (X##Y)
+#endif
+
+#define UL(x) _AC(x, UL)
+
+/***************************************************************/
+/*
+ * The following definitions are related each other, shoud be
+ * calculated specifically.
+ */
+#define VA_BITS (39)
+
+/* PAGE_SHIFT determines the page size */
+#undef PAGE_SIZE
+#define PAGE_SHIFT 16
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT 29
+#define SECTION_SIZE (UL(1) << SECTION_SHIFT)
+#define SECTION_MASK (~(SECTION_SIZE-1))
+/***************************************************************/
+
+/*
+ * Memory types available.
+ */
+#define MT_DEVICE_NGNRNE 0
+#define MT_DEVICE_NGNRE 1
+#define MT_DEVICE_GRE 2
+#define MT_NORMAL_NC 3
+#define MT_NORMAL 4
+
+#define MEMORY_ATTRIBUTES ((0x00 << MT_DEVICE_NGNRNE*8) | \
+ (0x04 << MT_DEVICE_NGNRE*8) | \
+ (0x0c << MT_DEVICE_GRE*8) | \
+ (0x44 << MT_NORMAL_NC*8) | \
+ (0xff << MT_NORMAL*8))
+
+/*
+ * Hardware page table definitions.
+ *
+ * Level 2 descriptor (PMD).
+ */
+#define PMD_TYPE_MASK (3 << 0)
+#define PMD_TYPE_FAULT (0 << 0)
+#define PMD_TYPE_TABLE (3 << 0)
+#define PMD_TYPE_SECT (1 << 0)
+
+/*
+ * Section
+ */
+#define PMD_SECT_S (3 << 8)
+#define PMD_SECT_AF (1 << 10)
+#define PMD_SECT_NG (1 << 11)
+#define PMD_SECT_PXN (UL(1) << 53)
+#define PMD_SECT_UXN (UL(1) << 54)
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PMD_ATTRINDX(t) ((t) << 2)
+#define PMD_ATTRINDX_MASK (7 << 2)
+
+/*
+ * TCR flags.
+ */
+#define TCR_T0SZ(x) ((64 - (x)) << 0)
+#define TCR_IRGN_NC (0 << 8)
+#define TCR_IRGN_WBWA (1 << 8)
+#define TCR_IRGN_WT (2 << 8)
+#define TCR_IRGN_WBNWA (3 << 8)
+#define TCR_IRGN_MASK (3 << 8)
+#define TCR_ORGN_NC (0 << 10)
+#define TCR_ORGN_WBWA (1 << 10)
+#define TCR_ORGN_WT (2 << 10)
+#define TCR_ORGN_WBNWA (3 << 10)
+#define TCR_ORGN_MASK (3 << 10)
+#define TCR_SHARED_NON (0 << 12)
+#define TCR_SHARED_OUTER (1 << 12)
+#define TCR_SHARED_INNER (2 << 12)
+#define TCR_TG0_4K (0 << 14)
+#define TCR_TG0_64K (1 << 14)
+#define TCR_TG0_16K (2 << 14)
+#define TCR_EL1_IPS_40BIT (2 << 32)
+#define TCR_EL2_IPS_40BIT (2 << 16)
+
+/* PTWs cacheable, inner/outer WBWA not shareable */
+#define TCR_FLAGS (TCR_IRGN_WBWA | TCR_ORGN_WBWA)
+
+#endif /* _ASM_ARMV8_MMU_H_ */
diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h
index c3489f1..7d3f9e4 100644
--- a/arch/arm/include/asm/byteorder.h
+++ b/arch/arm/include/asm/byteorder.h
@@ -23,10 +23,22 @@
# define __SWAB_64_THRU_32__
#endif
+#ifdef CONFIG_ARMV8
+
+#ifdef __AARCH64EB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
+
+#else /* CONFIG_ARMV8 */
+
#ifdef __ARMEB__
#include <linux/byteorder/big_endian.h>
#else
#include <linux/byteorder/little_endian.h>
#endif
+#endif /* CONFIG_ARMV8 */
+
#endif
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index 6d60a4a..49a8a88 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -11,6 +11,8 @@
#include <asm/system.h>
+#ifndef CONFIG_ARMV8
+
/*
* Invalidate L2 Cache using co-proc instruction
*/
@@ -28,6 +30,9 @@ void l2_cache_disable(void);
void set_section_dcache(int section, enum dcache_option option);
void dram_bank_mmu_setup(int bank);
+
+#endif
+
/*
* The current upper bound for ARM L1 data cache line sizes is 64 bytes. We
* use that value for aligning DMA buffers unless the board config has specified
diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 99b703e..30f008e 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -9,4 +9,14 @@
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
+
+#ifdef CONFIG_ARMV8
+/*
+ * Currently, GOT is used to relocate u-boot and
+ * configuration CONFIG_NEEDS_MANUAL_RELOC is needed.
+ */
+#define CONFIG_NEEDS_MANUAL_RELOC
+#define CONFIG_PHYS_64BIT
+#endif
+
#endif
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 79a9597..b30dd5e 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -47,6 +47,10 @@ struct arch_global_data {
#include <asm-generic/global_data.h>
-#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8")
+#ifdef CONFIG_ARMV8
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("x18")
+#else
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8")
+#endif
#endif /* __ASM_GBL_DATA_H */
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 1fbc531..6a1f05a 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -75,42 +75,45 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
-extern inline void __raw_writesb(unsigned int addr, const void *data, int bytelen)
+extern inline void __raw_writesb(unsigned long addr, const void *data,
+ int bytelen)
{
uint8_t *buf = (uint8_t *)data;
while(bytelen--)
__arch_putb(*buf++, addr);
}
-extern inline void __raw_writesw(unsigned int addr, const void *data, int wordlen)
+extern inline void __raw_writesw(unsigned long addr, const void *data,
+ int wordlen)
{
uint16_t *buf = (uint16_t *)data;
while(wordlen--)
__arch_putw(*buf++, addr);
}
-extern inline void __raw_writesl(unsigned int addr, const void *data, int longlen)
+extern inline void __raw_writesl(unsigned long addr, const void *data,
+ int longlen)
{
uint32_t *buf = (uint32_t *)data;
while(longlen--)
__arch_putl(*buf++, addr);
}
-extern inline void __raw_readsb(unsigned int addr, void *data, int bytelen)
+extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
{
uint8_t *buf = (uint8_t *)data;
while(bytelen--)
*buf++ = __arch_getb(addr);
}
-extern inline void __raw_readsw(unsigned int addr, void *data, int wordlen)
+extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
{
uint16_t *buf = (uint16_t *)data;
while(wordlen--)
*buf++ = __arch_getw(addr);
}
-extern inline void __raw_readsl(unsigned int addr, void *data, int longlen)
+extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
{
uint32_t *buf = (uint32_t *)data;
while(longlen--)
diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h
index ff13f36..4057787 100644
--- a/arch/arm/include/asm/macro.h
+++ b/arch/arm/include/asm/macro.h
@@ -54,5 +54,25 @@
bcs 1b
.endm
+#ifdef CONFIG_ARMV8
+/*
+ * Register aliases.
+ */
+lr .req x30
+
+/*
+ * Branch according to exception level
+ */
+.macro switch_el1_el2, xreg, el1_label, el2_label, fail_label
+ mrs \xreg, CurrentEL
+ cmp \xreg, 0x4
+ b.eq \el1_label
+ cmp \xreg, 0x8
+ b.eq \el2_label
+ b \fail_label
+.endm
+
+#endif /* CONFIG_ARMV8 */
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_ARM_MACRO_H__ */
diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h
index c412486..349404d 100644
--- a/arch/arm/include/asm/posix_types.h
+++ b/arch/arm/include/asm/posix_types.h
@@ -13,6 +13,8 @@
#ifndef __ARCH_ARM_POSIX_TYPES_H
#define __ARCH_ARM_POSIX_TYPES_H
+#include <config.h>
+
/*
* This file is generally used by user-level software, so you need to
* be a little careful about namespace pollution etc. Also, we cannot
@@ -28,9 +30,17 @@ typedef int __kernel_pid_t;
typedef unsigned short __kernel_ipc_pid_t;
typedef unsigned short __kernel_uid_t;
typedef unsigned short __kernel_gid_t;
+
+#ifdef CONFIG_ARMV8
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+#else /* CONFIG_ARMV8 */
typedef unsigned int __kernel_size_t;
typedef int __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
+#endif /* CONFIG_ARMV8 */
+
typedef long __kernel_time_t;
typedef long __kernel_suseconds_t;
typedef long __kernel_clock_t;
diff --git a/arch/arm/include/asm/proc-armv/ptrace.h b/arch/arm/include/asm/proc-armv/ptrace.h
index 79cc644..3830578 100644
--- a/arch/arm/include/asm/proc-armv/ptrace.h
+++ b/arch/arm/include/asm/proc-armv/ptrace.h
@@ -12,6 +12,25 @@
#include <linux/config.h>
+#ifdef CONFIG_ARMV8
+
+#define PCMASK 0
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored
+ * on the stack during an exception.
+ */
+struct pt_regs {
+ unsigned long elr;
+ unsigned long regs[31];
+};
+
+#endif /* __ASSEMBLY__ */
+
+#else /* CONFIG_ARMV8 */
+
#define USR26_MODE 0x00
#define FIQ26_MODE 0x01
#define IRQ26_MODE 0x02
@@ -106,4 +125,6 @@ static inline int valid_user_regs(struct pt_regs *regs)
#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_ARMV8 */
+
#endif
diff --git a/arch/arm/include/asm/proc-armv/system.h b/arch/arm/include/asm/proc-armv/system.h
index b4cfa68..17096fc 100644
--- a/arch/arm/include/asm/proc-armv/system.h
+++ b/arch/arm/include/asm/proc-armv/system.h
@@ -15,6 +15,60 @@
/*
* Save the current interrupt enable state & disable IRQs
*/
+#ifdef CONFIG_ARMV8
+
+/*
+ * Save the current interrupt enable state
+ * and disable IRQs/FIQs
+ */
+#define local_irq_save(flags) \
+ ({ \
+ asm volatile( \
+ "mrs %0, daif" \
+ "msr daifset, #3" \
+ : "=r" (flags) \
+ : \
+ : "memory"); \
+ })
+
+/*
+ * restore saved IRQ & FIQ state
+ */
+#define local_irq_restore(flags) \
+ ({ \
+ asm volatile( \
+ "msr daif, %0" \
+ : \
+ : "r" (flags) \
+ : "memory"); \
+ })
+
+/*
+ * Enable IRQs/FIQs
+ */
+#define local_irq_enable() \
+ ({ \
+ asm volatile( \
+ "msr daifclr, #3" \
+ : \
+ : \
+ : "memory"); \
+ })
+
+/*
+ * Disable IRQs/FIQs
+ */
+#define local_irq_disable() \
+ ({ \
+ asm volatile( \
+ "msr daifset, #3" \
+ : \
+ : \
+ : "memory"); \
+ })
+
+#else /* CONFIG_ARMV8 */
+
#define local_irq_save(x) \
({ \
unsigned long temp; \
@@ -109,7 +163,10 @@
: "r" (x) \
: "memory")
-#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
+#endif /* CONFIG_ARMV8 */
+
+#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) || \
+ defined(CONFIG_ARMV8)
/*
* On the StrongARM, "swp" is terminally broken since it bypasses the
* cache totally. This means that the cache becomes inconsistent, and,
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 760345f..b26e2ed 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -1,6 +1,79 @@
#ifndef __ASM_ARM_SYSTEM_H
#define __ASM_ARM_SYSTEM_H
+#ifdef CONFIG_ARMV8
+
+/*
+ * SCTLR_EL2 bits definitions
+ */
+#define CR_M (1 << 0) /* MMU enable */
+#define CR_A (1 << 1) /* Alignment abort enable */
+#define CR_C (1 << 2) /* Dcache enable */
+#define CR_SA (1 << 3) /* Stack Alignment Check Enable */
+#define CR_I (1 << 12) /* Icache enable */
+#define CR_WXN (1 << 19) /* Write Permision Imply XN */
+#define CR_EE (1 << 25) /* Exception (Big) Endian */
+
+#define PGTABLE_SIZE (0x10000)
+
+#ifndef __ASSEMBLY__
+
+#define isb() \
+ ({asm volatile( \
+ "isb" : : : "memory"); \
+ })
+
+#define wfi() \
+ ({asm volatile( \
+ "wfi" : : : "memory"); \
+ })
+
+static inline unsigned int curent_el(void)
+{
+ unsigned int el;
+ asm volatile("mrs %0, CurrentEL" : "=r" (el) : : "cc");
+ return el >> 2;
+}
+
+static inline unsigned int get_sctlr(void)
+{
+ unsigned int el, val;
+
+ el = curent_el();
+ if (el == 1)
+ asm volatile("mrs %0, sctlr_el1" : "=r" (val) : : "cc");
+ else if (el == 2)
+ asm volatile("mrs %0, sctlr_el2" : "=r" (val) : : "cc");
+ else
+ panic("Not Supported Exception Level");
+
+ return val;
+}
+
+static inline void set_sctlr(unsigned int val)
+{
+ unsigned int el;
+
+ el = curent_el();
+ if (el == 1)
+ asm volatile("msr sctlr_el1, %0" : : "r" (val) : "cc");
+ else if (el == 2)
+ asm volatile("msr sctlr_el2, %0" : : "r" (val) : "cc");
+ else
+ panic("Not Supported Exception Level");
+
+ asm volatile("isb");
+}
+
+void __asm_flush_dcache_all(void);
+void __asm_flush_dcache_range(u64 start, u64 end);
+void __asm_invalidate_tlb_all(void);
+void __asm_invalidate_icache_all(void);
+
+#endif /* __ASSEMBLY__ */
+
+#else /* CONFIG_ARMV8 */
+
#ifdef __KERNEL__
#define CPU_ARCH_UNKNOWN 0
@@ -45,6 +118,8 @@
#define CR_AFE (1 << 29) /* Access flag enable */
#define CR_TE (1 << 30) /* Thumb exception enable */
+#define PGTABLE_SIZE (4096 * 4)
+
/*
* This is used to ensure the compiler did actually allocate the register we
* asked it for some inline assembly sequences. Apparently we can't trust
@@ -132,4 +207,6 @@ void mmu_page_table_flush(unsigned long start, unsigned long stop);
#endif /* __KERNEL__ */
+#endif /* CONFIG_ARMV8 */
+
#endif
diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
index 71dc049..b7794f3 100644
--- a/arch/arm/include/asm/types.h
+++ b/arch/arm/include/asm/types.h
@@ -39,7 +39,11 @@ typedef unsigned int u32;
typedef signed long long s64;
typedef unsigned long long u64;
+#ifdef CONFIG_ARMV8
+#define BITS_PER_LONG 64
+#else /* CONFIG_ARMV8 */
#define BITS_PER_LONG 32
+#endif /* CONFIG_ARMV8 */
/* Dma addresses are 32-bits wide. */
diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h
index 2b5fce8..3ef5538 100644
--- a/arch/arm/include/asm/u-boot.h
+++ b/arch/arm/include/asm/u-boot.h
@@ -44,6 +44,10 @@ typedef struct bd_info {
#endif /* !CONFIG_SYS_GENERIC_BOARD */
/* For image.h:image_check_target_arch() */
+#ifndef CONFIG_ARMV8
#define IH_ARCH_DEFAULT IH_ARCH_ARM
+#else
+#define IH_ARCH_DEFAULT IH_ARCH_ARM64
+#endif
#endif /* _U_BOOT_H_ */
diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h
index 44593a8..0a228fb 100644
--- a/arch/arm/include/asm/unaligned.h
+++ b/arch/arm/include/asm/unaligned.h
@@ -8,7 +8,7 @@
/*
* Select endianness
*/
-#ifndef __ARMEB__
+#if __BYTE_ORDER == __LITTLE_ENDIAN
#define get_unaligned __get_unaligned_le
#define put_unaligned __put_unaligned_le
#else
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 4e78723..b5c949f 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -10,6 +10,9 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(ARCH).o
LIBGCC = $(obj)libgcc.o
+ifdef CONFIG_ARMV8
+SOBJS-y += crt0_64.o
+else
GLSOBJS += _ashldi3.o
GLSOBJS += _ashrdi3.o
GLSOBJS += _divsi3.o
@@ -21,9 +24,14 @@ GLSOBJS += _umodsi3.o
GLCOBJS += div0.o
SOBJS-y += crt0.o
+endif
ifndef CONFIG_SPL_BUILD
+ifdef CONFIG_ARMV8
+SOBJS-y += relocate_64.o
+else
SOBJS-y += relocate.o
+endif
ifndef CONFIG_SYS_GENERIC_BOARD
COBJS-y += board.o
endif
@@ -38,11 +46,17 @@ else
COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
endif
+ifdef CONFIG_ARMV8
+COBJS-y += interrupts_64.o
+else
COBJS-y += interrupts.o
+endif
COBJS-y += reset.o
COBJS-y += cache.o
+ifndef CONFIG_ARMV8
COBJS-y += cache-cp15.o
+endif
SRCS := $(GLSOBJS:.o=.S) $(GLCOBJS:.o=.c) \
$(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 34f50b0..61a87a8 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -344,7 +344,7 @@ void board_init_f(ulong bootflag)
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
/* reserve TLB table */
- gd->arch.tlb_size = 4096 * 4;
+ gd->arch.tlb_size = PGTABLE_SIZE;
addr -= gd->arch.tlb_size;
/* round down to next 64 kB limit */
@@ -419,6 +419,7 @@ void board_init_f(ulong bootflag)
}
#endif
+#ifndef CONFIG_ARMV8
/* setup stackpointer for exeptions */
gd->irq_sp = addr_sp;
#ifdef CONFIG_USE_IRQ
@@ -431,6 +432,10 @@ void board_init_f(ulong bootflag)
/* 8-byte alignment for ABI compliance */
addr_sp &= ~0x07;
+#else /* CONFIG_ARMV8 */
+ /* 16-byte alignment for ABI compliance */
+ addr_sp &= ~0x0f;
+#endif /* CONFIG_ARMV8 */
#else
addr_sp += 128; /* leave 32 words for abort-stack */
gd->irq_sp = addr_sp;
@@ -523,6 +528,15 @@ void board_init_r(gd_t *id, ulong dest_addr)
debug("monitor flash len: %08lX\n", monitor_flash_len);
board_init(); /* Setup chipselects */
+
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ /*
+ * We have to relocate the command table manually
+ */
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
+
/*
* TODO: printing of the clock inforamtion of the board is now
* implemented as part of bdinfo command. Currently only support for
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index eefb456..4b606e0 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -222,6 +222,21 @@ static void boot_prep_linux(bootm_headers_t *images)
/* Subcommand: GO */
static void boot_jump_linux(bootm_headers_t *images, int flag)
{
+#ifdef CONFIG_ARMV8
+ void (*kernel_entry)(void *fdt_addr);
+ int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
+
+ kernel_entry = (void (*)(void *fdt_addr))images->ep;
+
+ debug("## Transferring control to Linux (at address %lx)...\n",
+ (ulong) kernel_entry);
+ bootstage_mark(BOOTSTAGE_ID_RUN_OS);
+
+ announce_and_cleanup(fake);
+
+ if (!fake)
+ kernel_entry(images->ft_addr);
+#else
unsigned long machid = gd->bd->bi_arch_number;
char *s;
void (*kernel_entry)(int zero, int arch, uint params);
@@ -248,6 +263,7 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)
if (!fake)
kernel_entry(0, machid, r2);
+#endif
}
/* Main Entry point for arm bootm implementation
diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S
new file mode 100644
index 0000000..ddd46eb
--- /dev/null
+++ b/arch/arm/lib/crt0_64.S
@@ -0,0 +1,116 @@
+/*
+ * crt0 - C-runtime startup Code for AArch64 U-Boot
+ *
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * (C) Copyright 2012
+ * Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm-offsets.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+/*
+ * This file handles the target-independent stages of the U-Boot
+ * start-up where a C runtime environment is needed. Its entry point
+ * is _main and is branched into from the target's start.S file.
+ *
+ * _main execution sequence is:
+ *
+ * 1. Set up initial environment for calling board_init_f().
+ * This environment only provides a stack and a place to store
+ * the GD ('global data') structure, both located in some readily
+ * available RAM (SRAM, locked cache...). In this context, VARIABLE
+ * global data, initialized or not (BSS), are UNAVAILABLE; only
+ * CONSTANT initialized data are available.
+ *
+ * 2. Call board_init_f(). This function prepares the hardware for
+ * execution from system RAM (DRAM, DDR...) As system RAM may not
+ * be available yet, , board_init_f() must use the current GD to
+ * store any data which must be passed on to later stages. These
+ * data include the relocation destination, the future stack, and
+ * the future GD location.
+ *
+ * (the following applies only to non-SPL builds)
+ *
+ * 3. Set up intermediate environment where the stack and GD are the
+ * ones allocated by board_init_f() in system RAM, but BSS and
+ * initialized non-const data are still not available.
+ *
+ * 4. Call relocate_code(). This function relocates U-Boot from its
+ * current location into the relocation destination computed by
+ * board_init_f().
+ *
+ * 5. Set up final environment for calling board_init_r(). This
+ * environment has BSS (initialized to 0), initialized non-const
+ * data (initialized to their intended value), and stack in system
+ * RAM. GD has retained values set by board_init_f(). Some CPUs
+ * have some work left to do at this point regarding memory, so
+ * call c_runtime_cpu_setup.
+ *
+ * 6. Branch to board_init_r().
+ */
+
+ENTRY(_main)
+
+/*
+ * Set up initial C runtime environment and call board_init_f(0).
+ */
+ ldr x0, =(CONFIG_SYS_INIT_SP_ADDR)
+ sub x0, x0, #GD_SIZE /* allocate one GD above SP */
+ bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */
+ mov x18, sp /* GD is above SP */
+ mov x0, #0
+ bl board_init_f
+
+/*
+ * Set up intermediate environment (new sp and gd) and call
+ * relocate_code(addr_moni). Trick here is that we'll return
+ * 'here' but relocated.
+ */
+ ldr x0, [x18, #GD_START_ADDR_SP] /* x0 <- gd->start_addr_sp */
+ bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */
+ ldr x18, [x18, #GD_BD] /* x18 <- gd->bd */
+ sub x18, x18, #GD_SIZE /* new GD is below bd */
+
+ adr lr, relocation_return
+ ldr x9, [x18, #GD_RELOC_OFF] /* x9 <- gd->reloc_off */
+ add lr, lr, x9 /* new return address after relocation */
+ ldr x0, [x18, #GD_RELOCADDR] /* x0 <- gd->relocaddr */
+ b relocate_code
+
+relocation_return:
+
+/*
+ * Set up final (full) environment
+ */
+ bl c_runtime_cpu_setup /* still call old routine */
+
+/*
+ * Clear BSS section
+ */
+ ldr x9, [x18, #GD_RELOC_OFF] /* x9 <- gd->reloc_off */
+ ldr x0, =__bss_start
+ add x0, x0, x9 /* x0 <- __bss_start in RAM */
+ ldr x1, =__bss_end
+ add x1, x1, x9 /* x1 <- __bss_end in RAM */
+ mov x2, #0
+clear_loop:
+ str x2, [x0]
+ add x0, x0, #8
+ cmp x0, x1
+ b.lo clear_loop
+
+ /* call board_init_r(gd_t *id, ulong dest_addr) */
+ mov x0, x18 /* gd_t */
+ ldr x1, [x18, #GD_RELOCADDR] /* dest_addr */
+ b board_init_r /* PC relative jump */
+
+ /* NOTREACHED - board_init_r() does not return */
+
+ENDPROC(_main)
diff --git a/arch/arm/lib/interrupts_64.c b/arch/arm/lib/interrupts_64.c
new file mode 100644
index 0000000..b476722
--- /dev/null
+++ b/arch/arm/lib/interrupts_64.c
@@ -0,0 +1,120 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/compiler.h>
+
+
+int interrupt_init(void)
+{
+ return 0;
+}
+
+void enable_interrupts(void)
+{
+ return;
+}
+
+int disable_interrupts(void)
+{
+ return 0;
+}
+
+void show_regs(struct pt_regs *regs)
+{
+ int i;
+
+ printf("ELR: %lx\n", regs->elr);
+ printf("LR: %lx\n", regs->regs[30]);
+ for (i = 0; i < 29; i += 2)
+ printf("x%-2d: %016lx x%-2d: %016lx\n",
+ i, regs->regs[i], i+1, regs->regs[i+1]);
+ printf("\n");
+}
+
+/*
+ * do_bad_sync handles the impossible case in the Synchronous Abort vector.
+ */
+void do_bad_sync(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Synchronous Abort\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_irq handles the impossible case in the Irq vector.
+ */
+void do_bad_irq(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Irq\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_fiq handles the impossible case in the Fiq vector.
+ */
+void do_bad_fiq(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Fiq\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_bad_error handles the impossible case in the Error vector.
+ */
+void do_bad_error(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("Bad mode in \"Error\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_sync handles the Synchronous Abort exception.
+ */
+void do_sync(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("\"Synchronous Abort\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_irq handles the Irq exception.
+ */
+void do_irq(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("\"Irq\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_fiq handles the Fiq exception.
+ */
+void do_fiq(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("\"Fiq\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
+
+/*
+ * do_error handles the Error exception.
+ * Errors are more likely to be processor specific,
+ * it is defined with weak attribute and can be redefined
+ * in processor specific code.
+ */
+void __weak do_error(struct pt_regs *pt_regs, unsigned int esr)
+{
+ printf("\"Error\" handler, esr 0x%08x\n", esr);
+ show_regs(pt_regs);
+ panic("Resetting CPU ...\n");
+}
diff --git a/arch/arm/lib/relocate_64.S b/arch/arm/lib/relocate_64.S
new file mode 100644
index 0000000..29c3239
--- /dev/null
+++ b/arch/arm/lib/relocate_64.S
@@ -0,0 +1,57 @@
+/*
+ * relocate - common relocation function for AArch64 U-Boot
+ *
+ * (C) Copyright 2013
+ * Albert ARIBAUD <albert.u.boot@aribaud.net>
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+/*
+ * void relocate_code (addr_moni)
+ *
+ * This function relocates the monitor code.
+ *
+ * NOTE:
+ * GOT is used and configuration CONFIG_NEEDS_MANUAL_RELOC is needed.
+ */
+ENTRY(relocate_code)
+ /*
+ * Copy u-boot from flash to RAM
+ */
+ ldr x1, =__image_copy_start /* x1 <- copy source */
+ cmp x1, x0
+ b.eq relocate_done /* skip relocation */
+ mov x2, x0 /* x2 <- copy destination */
+ ldr x3, =__image_copy_end /* x3 <- source end address */
+
+copy_loop:
+ ldp x10, x11, [x1], #16 /* copy from source address [x1] */
+ stp x10, x11, [x2], #16 /* copy to target address [x2] */
+ cmp x1, x3 /* until source end address [x3] */
+ b.lo copy_loop
+
+ /*
+ * Fix .reloc relocations
+ */
+ ldr x9, [x18, #GD_RELOC_OFF]/* x9 <- relocation offset */
+ ldr x1, =__rel_got_start /* x1 <- rel got start ofs */
+ add x1, x1, x9 /* x1 <- rel got start in RAM */
+ ldr x2, =__rel_got_end /* x2 <- rel got end ofs */
+ add x2, x2, x9 /* x2 <- rel got end in RAM */
+fixloop:
+ ldr x10, [x1]
+ add x10, x10, x9 /* x10 <- address to be fixed up */
+ str x10, [x1]
+ add x1, x1, #8 /* each got entry is 8 bytes */
+ cmp x1, x2
+ b.lo fixloop
+
+relocate_done:
+ ret
+ENDPROC(relocate_code)
diff --git a/common/image.c b/common/image.c
index 56a5a62..7182549 100644
--- a/common/image.c
+++ b/common/image.c
@@ -81,6 +81,7 @@ static const table_entry_t uimage_arch[] = {
{ IH_ARCH_NDS32, "nds32", "NDS32", },
{ IH_ARCH_OPENRISC, "or1k", "OpenRISC 1000",},
{ IH_ARCH_SANDBOX, "sandbox", "Sandbox", },
+ { IH_ARCH_ARM64, "arm64", "AArch64", },
{ -1, "", "", },
};
diff --git a/doc/README.armv8 b/doc/README.armv8
new file mode 100644
index 0000000..a91fbaa
--- /dev/null
+++ b/doc/README.armv8
@@ -0,0 +1,18 @@
+Notes:
+
+1. Currenly, u-boot could be running at EL1 or EL2.
+
+2. GOT is used to relocate u-boot and CONFIG_NEEDS_MANUAL_RELOC is needed.
+
+3. Fdt should be placed at a 2-megabyte boundary and within the first 512
+ megabytes from the start of the kernel image. So, fdt_high should be
+ defined specially.
+ Please reference linux/Documentation/arm64/booting.txt for detail.
+
+4. Generic board is supported.
+
+Contributor:
+ Tom Rini <trini@ti.com>
+ Scott Wood <scottwood@freescale.com>
+ Sharma Bhupesh <B45370@freescale.com>
+ Rob Herring <robherring2@gmail.com>
diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c
index 8fb1765..a58147c 100644
--- a/examples/standalone/stubs.c
+++ b/examples/standalone/stubs.c
@@ -39,6 +39,20 @@ gd_t *global_data;
" bctr\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r11");
#elif defined(CONFIG_ARM)
+#ifdef CONFIG_ARMV8
+/*
+ * x18 holds the pointer to the global_data, x9 is a call-clobbered
+ * register
+ */
+#define EXPORT_FUNC(x) \
+ asm volatile ( \
+" .globl " #x "\n" \
+#x ":\n" \
+" ldr x9, [x18, %0]\n" \
+" ldr x9, [x9, %1]\n" \
+" br x9\n" \
+ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "x9");
+#else
/*
* r8 holds the pointer to the global_data, ip is a call-clobbered
* register
@@ -50,6 +64,7 @@ gd_t *global_data;
" ldr ip, [r8, %0]\n" \
" ldr pc, [ip, %1]\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "ip");
+#endif
#elif defined(CONFIG_MIPS)
/*
* k0 ($26) holds the pointer to the global_data; t9 ($25) is a call-
diff --git a/include/image.h b/include/image.h
index f93a393..12262d7 100644
--- a/include/image.h
+++ b/include/image.h
@@ -156,6 +156,7 @@ struct lmb;
#define IH_ARCH_SANDBOX 19 /* Sandbox architecture (test only) */
#define IH_ARCH_NDS32 20 /* ANDES Technology - NDS32 */
#define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */
+#define IH_ARCH_ARM64 22 /* ARM64 */
/*
* Image Types
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v9 2/5] board support of vexpress_aemv8a
2013-09-13 8:38 ` [U-Boot] [PATCH v9 1/5] core support of arm64 fenghua at phytium.com.cn
@ 2013-09-13 8:38 ` fenghua at phytium.com.cn
2013-09-13 8:38 ` [U-Boot] [PATCH v9 3/5] generic board patch of manual reloc and zero gd_t fenghua at phytium.com.cn
2013-09-13 10:22 ` [U-Boot] [PATCH v9 2/5] board support of vexpress_aemv8a Sharma Bhupesh-B45370
0 siblings, 2 replies; 9+ messages in thread
From: fenghua at phytium.com.cn @ 2013-09-13 8:38 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
Signed-off-by: David Feng <fenghua@phytium.com.cn> and Sharma Bhupesh <B45370@freescale.com>
---
MAINTAINERS | 4 +
board/armltd/dts/vexpress64.dts | 439 ++++++++++++++++++++++++++++++++++
board/armltd/vexpress64/Makefile | 27 +++
board/armltd/vexpress64/vexpress64.c | 70 ++++++
boards.cfg | 1 +
include/configs/vexpress_aemv8a.h | 193 +++++++++++++++
6 files changed, 734 insertions(+)
create mode 100644 board/armltd/dts/vexpress64.dts
create mode 100644 board/armltd/vexpress64/Makefile
create mode 100644 board/armltd/vexpress64/vexpress64.c
create mode 100644 include/configs/vexpress_aemv8a.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 6e50fc4..d142307 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1095,6 +1095,10 @@ Sergey Yanovich <ynvich@gmail.com>
lp8x4x xscale/pxa
+David Feng <fenghua@phytium.com.cn>
+
+ vexpress_aemv8a ARM ARMV8 (Quad Core)
+
-------------------------------------------------------------------------
Unknown / orphaned boards:
diff --git a/board/armltd/dts/vexpress64.dts b/board/armltd/dts/vexpress64.dts
new file mode 100644
index 0000000..067fea7
--- /dev/null
+++ b/board/armltd/dts/vexpress64.dts
@@ -0,0 +1,439 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+ /* boot configurations for u-boot */
+ config {
+ /*bootdelay = <1>;*/
+ kernel-offset = <0x100000>;
+ rootdisk-offset = <0x800000>;
+ bootcmd = "bootm 0x100000 0x800000:0x2000000";
+ };
+};
+
+/ {
+ model = "RTSM_VE_AEMv8A";
+ compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ /* chosen */
+ /* generated by u-boot */
+
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+ };
+
+ gic: interrupt-controller at 2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x2c001000 0 0x1000>,
+ <0x0 0x2c002000 0 0x1000>,
+ <0x0 0x2c004000 0 0x2000>,
+ <0x0 0x2c006000 0 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xff01>,
+ <1 14 0xff01>,
+ <1 11 0xff01>,
+ <1 10 0xff01>;
+ clock-frequency = <100000000>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+
+ motherboard {
+ arm,v2m-memory-map = "rs1";
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ ranges;
+
+ flash at 0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ vram at 2,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <2 0x00000000 0x00800000>;
+ };
+
+ ethernet at 2,02000000 {
+ compatible = "smsc,lan91c111";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ };
+
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
+
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
+
+ iofpga at 3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg at 010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_sysctl: sysctl at 020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ };
+
+ aaci at 040000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ mmci at 050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9 10>;
+ cd-gpios = <&v2m_sysreg 0 0>;
+ wp-gpios = <&v2m_sysreg 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ kmi at 060000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi at 070000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ v2m_serial0: uart at 090000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial1: uart at 0a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial2: uart at 0b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial3: uart at 0c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ wdt at 0f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ v2m_timer01: timer at 110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ v2m_timer23: timer at 120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ rtc at 170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ clcd at 1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+ clock-names = "clcdclk", "apb_pclk";
+ };
+ };
+
+ v2m_fixed_3v3: fixedregulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mcc {
+ compatible = "arm,vexpress,config-bus", "simple-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ v2m_oscclk1: osc at 1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 63500000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ reset at 0 {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga at 0 {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown at 0 {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot at 0 {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode at 0 {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
+ };
+ };
+
+ panels {
+ panel at 0 {
+ compatible = "panel";
+ mode = "VGA";
+ refresh = <60>;
+ xres = <640>;
+ yres = <480>;
+ pixclock = <39721>;
+ left_margin = <40>;
+ right_margin = <24>;
+ upper_margin = <32>;
+ lower_margin = <11>;
+ hsync_len = <96>;
+ vsync_len = <2>;
+ sync = <0>;
+ vmode = "FB_VMODE_NONINTERLACED";
+ tim2 = "TIM2_BCD", "TIM2_IPC";
+ cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)";
+ caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888";
+ bpp = <16>;
+ };
+
+ panel at 1 {
+ compatible = "panel";
+ mode = "XVGA";
+ refresh = <60>;
+ xres = <1024>;
+ yres = <768>;
+ pixclock = <15748>;
+ left_margin = <152>;
+ right_margin = <48>;
+ upper_margin = <23>;
+ lower_margin = <3>;
+ hsync_len = <104>;
+ vsync_len = <4>;
+ sync = <0>;
+ vmode = "FB_VMODE_NONINTERLACED";
+ tim2 = "TIM2_BCD", "TIM2_IPC";
+ cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)";
+ caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888";
+ bpp = <16>;
+ };
+ };
+};
diff --git a/board/armltd/vexpress64/Makefile b/board/armltd/vexpress64/Makefile
new file mode 100644
index 0000000..f907c92
--- /dev/null
+++ b/board/armltd/vexpress64/Makefile
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := vexpress64.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
new file mode 100644
index 0000000..0feb604
--- /dev/null
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ * Sharma Bhupesh <B45370@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <linux/compiler.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
+ return 0;
+}
+
+int timer_init(void)
+{
+ return 0;
+}
+
+/*
+ * Board specific reset that is system reset.
+ */
+void reset_cpu(ulong addr)
+{
+}
+
+/*
+ * Default implementation of gpio related functiuons
+ * Real implementation should be in gpio driver.
+ * fdtdec.c need this function, but currenty no gpio driver defined
+ */
+int __weak gpio_get_value(unsigned gpio)
+{
+ return 0;
+}
+
+void __weak gpio_set_value(unsigned gpio, int vlaue)
+{
+ return;
+}
+
+void __weak gpio_request(unsigned gpio, const char *label)
+{
+ return;
+}
+
+/*
+ * Board specific ethernet initialization routine.
+ */
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC91111
+ rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
+#endif
+ return rc;
+}
diff --git a/boards.cfg b/boards.cfg
index 4b1f960..85a92a0 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -1196,5 +1196,6 @@ gr_ep2s60 sparc leon3 - gaisler
grsim sparc leon3 - gaisler
gr_xc3s_1500 sparc leon3 - gaisler
coreboot-x86 x86 x86 coreboot chromebook-x86 coreboot coreboot:SYS_TEXT_BASE=0x01110000
+vexpress_aemv8a arm armv8 vexpress64 armltd - vexpress_aemv8a:ARMV8
# Target ARCH CPU Board name Vendor SoC Options
########################################################################################################################
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
new file mode 100644
index 0000000..c8b286f
--- /dev/null
+++ b/include/configs/vexpress_aemv8a.h
@@ -0,0 +1,193 @@
+/*
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VEXPRESS_AEMV8A_H
+#define __VEXPRESS_AEMV8A_H
+
+#define DEBUG
+
+/*#define CONFIG_BOOTING_EL1*/
+
+/*#define CONFIG_SYS_GENERIC_BOARD*/
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* Cache Definitions */
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_ICACHE_OFF
+
+#define CONFIG_IDENT_STRING " vexpress_aemv8a"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a"
+
+/* Link Definitions */
+#define CONFIG_SYS_TEXT_BASE 0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x400000)
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_EMBED
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_DEFAULT_DEVICE_TREE vexpress64
+
+/* SMP Definitions */
+#define SECONDARY_CPU_MAILBOX 0x8000fff8
+
+/* CS register bases for the original memory map. */
+#define V2M_PA_CS0 0x00000000
+#define V2M_PA_CS1 0x14000000
+#define V2M_PA_CS2 0x18000000
+#define V2M_PA_CS3 0x1c000000
+#define V2M_PA_CS4 0x0c000000
+#define V2M_PA_CS5 0x10000000
+
+#define V2M_PERIPH_OFFSET(x) (x << 16)
+#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
+#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
+#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
+
+#define V2M_BASE 0x80000000
+
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0 (V2M_PA_CS0)
+#define V2M_NOR1 (V2M_PA_CS4)
+#define V2M_SRAM (V2M_PA_CS1)
+
+/* Common peripherals relative to CS7. */
+#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
+#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
+#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
+#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
+
+#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
+#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
+#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
+#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
+
+#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
+
+#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
+#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
+
+#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
+#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
+
+#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
+
+#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
+
+/* System register offsets. */
+#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
+
+/* Generic Timer Definitions */
+#define CONFIG_SYS_CNTFRQ (0x1800000) /* 24MHz */
+
+/* Generic Interrupt Controller Definitions */
+#define GIC_DIST_BASE (0x2C001000)
+#define GIC_CPU_BASE (0x2C002000)
+
+#define CONFIG_SYS_MEMTEST_START V2M_BASE
+#define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000)
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+
+/* SMSC9115 Ethernet from SMSC9118 family */
+#define CONFIG_SMC9111 1
+#define CONFIG_SMC9111_BASE (0x1a000000)
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 24000000
+#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
+ (void *)CONFIG_SYS_SERIAL1}
+#define CONFIG_CONS_INDEX 0
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0 V2M_UART0
+#define CONFIG_SYS_SERIAL1 V2M_UART1
+
+/* Command line configuration */
+#define CONFIG_MENU
+/*#define CONFIG_MENU_SHOW*/
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PXE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000)
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2048 MB */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+
+#define CONFIG_SYS_HZ 1000
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x80100000\0" \
+ "kernel_addr=0x100000\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "console=ttyAMA0,38400n8\0"
+
+#define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0"
+#define CONFIG_BOOTCOMMAND "bootm $kernel_addr $ramdisk_addr:$ramdisk_size"
+#define CONFIG_BOOTDELAY -1
+
+/* Store environment@top of flash */
+#define CONFIG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_SIZE 0x1000
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT "VExpress# "
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+#endif /* __VEXPRESS_AEMV8A_H */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v9 3/5] generic board patch of manual reloc and zero gd_t
2013-09-13 8:38 ` [U-Boot] [PATCH v9 2/5] board support of vexpress_aemv8a fenghua at phytium.com.cn
@ 2013-09-13 8:38 ` fenghua at phytium.com.cn
2013-09-13 8:38 ` [U-Boot] [PATCH v9 4/5] 64bit initrd start address support fenghua at phytium.com.cn
2013-09-13 10:22 ` [U-Boot] [PATCH v9 2/5] board support of vexpress_aemv8a Sharma Bhupesh-B45370
1 sibling, 1 reply; 9+ messages in thread
From: fenghua at phytium.com.cn @ 2013-09-13 8:38 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
common/board_f.c | 19 +++++++++++--------
common/board_r.c | 18 ++++++++++++++++++
2 files changed, 29 insertions(+), 8 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c
index 0ada1af..f6ca610 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -458,7 +458,7 @@ static int reserve_round_4k(void)
static int reserve_mmu(void)
{
/* reserve TLB table */
- gd->arch.tlb_size = 4096 * 4;
+ gd->arch.tlb_size = PGTABLE_SIZE;
gd->relocaddr -= gd->arch.tlb_size;
/* round down to next 64 kB limit */
@@ -610,7 +610,7 @@ static int reserve_stacks(void)
* TODO(sjg at chromium.org): Perhaps create arch_reserve_stack()
* to handle this and put in arch/xxx/lib/stack.c
*/
-# ifdef CONFIG_ARM
+# if defined(CONFIG_ARM) && !defined(CONFIG_ARMV8)
# ifdef CONFIG_USE_IRQ
gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
@@ -807,11 +807,6 @@ static int mark_bootstage(void)
}
static init_fnc_t init_sequence_f[] = {
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
- !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
- !defined(CONFIG_MPC86xx) && !defined(CONFIG_X86)
- zero_global_data,
-#endif
#ifdef CONFIG_SANDBOX
setup_ram_buf,
#endif
@@ -1001,10 +996,18 @@ void board_init_f(ulong boot_flags)
{
#ifndef CONFIG_X86
gd_t data;
-
gd = &data;
#endif
+ /*
+ * Zero gd_t first, otherwise the debug print(if DEBUG defined)
+ * in initcall_run_list function before zero_global_data is called
+ * will go wrong.
+ */
+#ifndef CONFIG_X86
+ zero_global_data();
+#endif
+
gd->flags = boot_flags;
if (initcall_run_list(init_sequence_f))
diff --git a/common/board_r.c b/common/board_r.c
index 86ca1cb..7217e3c 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -157,6 +157,13 @@ static int initr_reloc_global_data(void)
*/
gd->env_addr += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
#endif
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ /*
+ * We have to relocate the command table manually
+ */
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
return 0;
}
@@ -899,6 +906,7 @@ init_fnc_t init_sequence_r[] = {
initr_modem,
#endif
run_main_loop,
+ NULL,
};
void board_init_r(gd_t *new_gd, ulong dest_addr)
@@ -906,6 +914,16 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
#ifndef CONFIG_X86
gd = new_gd;
#endif
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ /*
+ * We have to relocate the init_sequence_r table manually
+ */
+ init_fnc_t *init_fnc_ptr;
+ for (init_fnc_ptr = init_sequence_r; *init_fnc_ptr; ++init_fnc_ptr)
+ *init_fnc_ptr = (init_fnc_t *)
+ ((unsigned long)(*init_fnc_ptr) + gd->reloc_off);
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
+
if (initcall_run_list(init_sequence_r))
hang();
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v9 4/5] 64bit initrd start address support
2013-09-13 8:38 ` [U-Boot] [PATCH v9 3/5] generic board patch of manual reloc and zero gd_t fenghua at phytium.com.cn
@ 2013-09-13 8:38 ` fenghua at phytium.com.cn
2013-09-13 8:38 ` [U-Boot] [PATCH v9 5/5] remove compiling warnings fenghua at phytium.com.cn
0 siblings, 1 reply; 9+ messages in thread
From: fenghua at phytium.com.cn @ 2013-09-13 8:38 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
common/fdt_support.c | 66 ++++++++++++++++++++++++++------------------------
1 file changed, 34 insertions(+), 32 deletions(-)
diff --git a/common/fdt_support.c b/common/fdt_support.c
index b034c98..9bc5821 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -21,6 +21,34 @@
*/
DECLARE_GLOBAL_DATA_PTR;
+/*
+ * Get cells len in bytes
+ * if #NNNN-cells property is 2 then len is 8
+ * otherwise len is 4
+ */
+static int get_cells_len(void *blob, char *nr_cells_name)
+{
+ const fdt32_t *cell;
+
+ cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
+ if (cell && fdt32_to_cpu(*cell) == 2)
+ return 8;
+
+ return 4;
+}
+
+/*
+ * Write a 4 or 8 byte big endian cell
+ */
+static void write_cell(u8 *addr, u64 val, int size)
+{
+ int shift = (size - 1) * 8;
+ while (size-- > 0) {
+ *addr++ = (val >> shift) & 0xff;
+ shift -= 8;
+ }
+}
+
/**
* fdt_getprop_u32_default - Find a node and return it's property or a default
*
@@ -131,9 +159,9 @@ static int fdt_fixup_stdout(void *fdt, int chosenoff)
int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
{
- int nodeoffset;
+ int nodeoffset, addr_cell_len;
int err, j, total;
- fdt32_t tmp;
+ fdt64_t tmp;
const char *path;
uint64_t addr, size;
@@ -170,9 +198,11 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
return err;
}
+ addr_cell_len = get_cells_len(fdt, "#address-cells");
+
path = fdt_getprop(fdt, nodeoffset, "linux,initrd-start", NULL);
if ((path == NULL) || force) {
- tmp = cpu_to_fdt32(initrd_start);
+ write_cell((u8 *)&tmp, initrd_start, addr_cell_len);
err = fdt_setprop(fdt, nodeoffset,
"linux,initrd-start", &tmp, sizeof(tmp));
if (err < 0) {
@@ -181,7 +211,7 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
fdt_strerror(err));
return err;
}
- tmp = cpu_to_fdt32(initrd_end);
+ write_cell((u8 *)&tmp, initrd_end, addr_cell_len);
err = fdt_setprop(fdt, nodeoffset,
"linux,initrd-end", &tmp, sizeof(tmp));
if (err < 0) {
@@ -343,34 +373,6 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat,
do_fixup_by_compat(fdt, compat, prop, &tmp, 4, create);
}
-/*
- * Get cells len in bytes
- * if #NNNN-cells property is 2 then len is 8
- * otherwise len is 4
- */
-static int get_cells_len(void *blob, char *nr_cells_name)
-{
- const fdt32_t *cell;
-
- cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
- if (cell && fdt32_to_cpu(*cell) == 2)
- return 8;
-
- return 4;
-}
-
-/*
- * Write a 4 or 8 byte big endian cell
- */
-static void write_cell(u8 *addr, u64 val, int size)
-{
- int shift = (size - 1) * 8;
- while (size-- > 0) {
- *addr++ = (val >> shift) & 0xff;
- shift -= 8;
- }
-}
-
#ifdef CONFIG_NR_DRAM_BANKS
#define MEMORY_BANKS_MAX CONFIG_NR_DRAM_BANKS
#else
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v9 5/5] remove compiling warnings
2013-09-13 8:38 ` [U-Boot] [PATCH v9 4/5] 64bit initrd start address support fenghua at phytium.com.cn
@ 2013-09-13 8:38 ` fenghua at phytium.com.cn
0 siblings, 0 replies; 9+ messages in thread
From: fenghua at phytium.com.cn @ 2013-09-13 8:38 UTC (permalink / raw)
To: u-boot
From: David Feng <fenghua@phytium.com.cn>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
---
common/cmd_pxe.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c
index a2fb50a..df58522 100644
--- a/common/cmd_pxe.c
+++ b/common/cmd_pxe.c
@@ -57,7 +57,7 @@ static int format_mac_pxe(char *outbuf, size_t outbuf_len)
uchar ethaddr[6];
if (outbuf_len < 21) {
- printf("outbuf is too small (%d < 21)\n", outbuf_len);
+ printf("outbuf is too small (%zd < 21)\n", outbuf_len);
return -EINVAL;
}
@@ -100,7 +100,7 @@ static int get_bootfile_path(const char *file_path, char *bootfile_path,
path_len = (last_slash - bootfile) + 1;
if (bootfile_path_size < path_len) {
- printf("bootfile_path too small. (%d < %d)\n",
+ printf("bootfile_path too small. (%zd < %zd)\n",
bootfile_path_size, path_len);
return -1;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v9 2/5] board support of vexpress_aemv8a
2013-09-13 8:38 ` [U-Boot] [PATCH v9 2/5] board support of vexpress_aemv8a fenghua at phytium.com.cn
2013-09-13 8:38 ` [U-Boot] [PATCH v9 3/5] generic board patch of manual reloc and zero gd_t fenghua at phytium.com.cn
@ 2013-09-13 10:22 ` Sharma Bhupesh-B45370
1 sibling, 0 replies; 9+ messages in thread
From: Sharma Bhupesh-B45370 @ 2013-09-13 10:22 UTC (permalink / raw)
To: u-boot
Hi David,
> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> On Behalf Of fenghua at phytium.com.cn
> Sent: Friday, September 13, 2013 2:09 PM
> To: u-boot at lists.denx.de
> Cc: trini at ti.com; David Feng; Wood Scott-B07421
> Subject: [U-Boot] [PATCH v9 2/5] board support of vexpress_aemv8a
>
> From: David Feng <fenghua@phytium.com.cn>
>
> Signed-off-by: David Feng <fenghua@phytium.com.cn> and Sharma Bhupesh
> <B45370@freescale.com>
> ---
I would prefer that you add the S-o-b's in the following way (suggested in submitting patch guidelines)
and also correct my S-o-b:
Signed-off-by: David Feng <fenghua@phytium.com.cn>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
[snip..]
Regards,
Bhupesh
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v9 0/5] arm64 patch
2013-09-13 8:38 [U-Boot] [PATCH v9 0/5] arm64 patch fenghua at phytium.com.cn
2013-09-13 8:38 ` [U-Boot] [PATCH v9 1/5] core support of arm64 fenghua at phytium.com.cn
@ 2013-09-13 16:00 ` Wolfgang Denk
2013-09-14 0:15 ` FengHua
1 sibling, 1 reply; 9+ messages in thread
From: Wolfgang Denk @ 2013-09-13 16:00 UTC (permalink / raw)
To: u-boot
Dear fenghua at phytium.com.cn,
In message <1379061539-38972-1-git-send-email-fenghua@phytium.com.cn> you wrote:
> From: David Feng <fenghua@phytium.com.cn>
>
> The porting has been merged with arm architecture.
> Most architecture codes are placed in
> arch/arm/cpu/armv8 directory. Generic board is also
> supported after a few bugs are fixed.
> u-boot could be running at EL1 or EL2.
>
> Changes for v8:
> - add Signed-off-by information to patch "board support of
> vexpress_aemv8a" which SMC91111 support is integrated
> from Sharma Bhupesh's patch.
> - adjust pt_regs struct and add exception state
> preservation in exception.S.
what exactly are the changes for V9 ?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Remember thee Ay, thou poor ghost while memory holds a seat In this
distracted globe. Remember thee! Yea, from the table of my memory
I'll wipe away all trivial fond records, All saws of books, all
forms, all pressures past, That youth and observation copied there.
Hamlet, I : v : 95 William Shakespeare
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v9 0/5] arm64 patch
2013-09-13 16:00 ` [U-Boot] [PATCH v9 0/5] arm64 patch Wolfgang Denk
@ 2013-09-14 0:15 ` FengHua
0 siblings, 0 replies; 9+ messages in thread
From: FengHua @ 2013-09-14 0:15 UTC (permalink / raw)
To: u-boot
> -----????-----
> ???: "Wolfgang Denk" <wd@denx.de>
> ????: 2013?9?14? ???
> ???: fenghua at phytium.com.cn
> ??: u-boot at lists.denx.de, trini at ti.com, albert.u.boot at aribaud.net, scottwood at freescale.com
> ??: Re: [PATCH v9 0/5] arm64 patch
>
> Dear fenghua at phytium.com.cn,
>
> In message <1379061539-38972-1-git-send-email-fenghua@phytium.com.cn> you wrote:
> > From: David Feng <fenghua@phytium.com.cn>
> >
> > The porting has been merged with arm architecture.
> > Most architecture codes are placed in
> > arch/arm/cpu/armv8 directory. Generic board is also
> > supported after a few bugs are fixed.
> > u-boot could be running at EL1 or EL2.
> >
> > Changes for v8:
> > - add Signed-off-by information to patch "board support of
> > vexpress_aemv8a" which SMC91111 support is integrated
> > from Sharma Bhupesh's patch.
> > - adjust pt_regs struct and add exception state
> > preservation in exception.S.
>
> what exactly are the changes for V9 ?
>
The number is incorrect, the changes for v8 is actually for v9,
I will correct it in the next.
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Remember thee Ay, thou poor ghost while memory holds a seat In this
> distracted globe. Remember thee! Yea, from the table of my memory
> I'll wipe away all trivial fond records, All saws of books, all
> forms, all pressures past, That youth and observation copied there.
> Hamlet, I : v : 95 William Shakespeare
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-09-14 0:15 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-09-13 8:38 [U-Boot] [PATCH v9 0/5] arm64 patch fenghua at phytium.com.cn
2013-09-13 8:38 ` [U-Boot] [PATCH v9 1/5] core support of arm64 fenghua at phytium.com.cn
2013-09-13 8:38 ` [U-Boot] [PATCH v9 2/5] board support of vexpress_aemv8a fenghua at phytium.com.cn
2013-09-13 8:38 ` [U-Boot] [PATCH v9 3/5] generic board patch of manual reloc and zero gd_t fenghua at phytium.com.cn
2013-09-13 8:38 ` [U-Boot] [PATCH v9 4/5] 64bit initrd start address support fenghua at phytium.com.cn
2013-09-13 8:38 ` [U-Boot] [PATCH v9 5/5] remove compiling warnings fenghua at phytium.com.cn
2013-09-13 10:22 ` [U-Boot] [PATCH v9 2/5] board support of vexpress_aemv8a Sharma Bhupesh-B45370
2013-09-13 16:00 ` [U-Boot] [PATCH v9 0/5] arm64 patch Wolfgang Denk
2013-09-14 0:15 ` FengHua
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.