* [PATCH] [TRIVIAL] [media] media_tree: Fix spelling errors
@ 2013-10-21 0:34 Jonathan McCrohan
0 siblings, 0 replies; only message in thread
From: Jonathan McCrohan @ 2013-10-21 0:34 UTC (permalink / raw)
To: linux-media; +Cc: Jonathan McCrohan
Fix various spelling errors in strings and comments throughout the media
tree. The majority of these were found using Lucas De Marchi's codespell
tool.
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
---
drivers/media/common/siano/smscoreapi.h | 4 ++--
drivers/media/common/siano/smsdvb.h | 2 +-
drivers/media/dvb-core/dvb_demux.c | 2 +-
drivers/media/dvb-frontends/dib8000.c | 4 ++--
drivers/media/dvb-frontends/drxk_hard.c | 18 +++++++++---------
drivers/media/i2c/Kconfig | 2 +-
drivers/media/i2c/adv7183.c | 2 +-
drivers/media/i2c/adv7183_regs.h | 6 +++---
drivers/media/i2c/adv7604.c | 2 +-
drivers/media/i2c/adv7842.c | 2 +-
drivers/media/i2c/ir-kbd-i2c.c | 2 +-
drivers/media/i2c/m5mols/m5mols_controls.c | 2 +-
drivers/media/i2c/s5c73m3/s5c73m3-core.c | 4 ++--
drivers/media/i2c/s5c73m3/s5c73m3.h | 2 +-
drivers/media/i2c/saa7115.c | 2 +-
drivers/media/i2c/soc_camera/ov5642.c | 2 +-
drivers/media/pci/cx18/cx18-driver.h | 2 +-
drivers/media/pci/cx23885/cx23885-417.c | 2 +-
drivers/media/pci/pluto2/pluto2.c | 2 +-
drivers/media/platform/coda.c | 2 +-
drivers/media/platform/exynos4-is/fimc-core.c | 2 +-
drivers/media/platform/exynos4-is/media-dev.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/platform/s5p-mfc/regs-mfc.h | 2 +-
drivers/media/platform/s5p-mfc/s5p_mfc.c | 12 ++++++------
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 2 +-
drivers/media/platform/s5p-tv/mixer.h | 2 +-
drivers/media/platform/s5p-tv/mixer_video.c | 4 ++--
drivers/media/platform/soc_camera/omap1_camera.c | 2 +-
drivers/media/platform/vivi.c | 4 ++--
drivers/media/platform/vsp1/vsp1_drv.c | 2 +-
drivers/media/radio/radio-si476x.c | 4 ++--
drivers/media/rc/imon.c | 2 +-
drivers/media/rc/redrat3.c | 2 +-
drivers/media/tuners/mt2063.c | 4 ++--
drivers/media/tuners/tuner-xc2028-types.h | 2 +-
drivers/media/usb/dvb-usb-v2/mxl111sf.c | 4 ++--
drivers/media/usb/gspca/gl860/gl860.c | 2 +-
drivers/media/usb/gspca/pac207.c | 2 +-
drivers/media/usb/gspca/pac7302.c | 2 +-
drivers/media/usb/gspca/stv0680.c | 2 +-
drivers/media/usb/gspca/zc3xx.c | 2 +-
drivers/media/usb/pwc/pwc-if.c | 2 +-
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/v4l2-core/v4l2-ctrls.c | 2 +-
45 files changed, 68 insertions(+), 68 deletions(-)
diff --git a/drivers/media/common/siano/smscoreapi.h b/drivers/media/common/siano/smscoreapi.h
index d0799e3..9c9063c 100644
--- a/drivers/media/common/siano/smscoreapi.h
+++ b/drivers/media/common/siano/smscoreapi.h
@@ -955,7 +955,7 @@ struct sms_rx_stats {
u32 modem_state; /* from SMSHOSTLIB_DVB_MODEM_STATE_ET */
s32 SNR; /* dB */
u32 ber; /* Post Viterbi ber [1E-5] */
- u32 ber_error_count; /* Number of erronous SYNC bits. */
+ u32 ber_error_count; /* Number of erroneous SYNC bits. */
u32 ber_bit_count; /* Total number of SYNC bits. */
u32 ts_per; /* Transport stream PER,
0xFFFFFFFF indicate N/A */
@@ -981,7 +981,7 @@ struct sms_rx_stats_ex {
u32 modem_state; /* from SMSHOSTLIB_DVB_MODEM_STATE_ET */
s32 SNR; /* dB */
u32 ber; /* Post Viterbi ber [1E-5] */
- u32 ber_error_count; /* Number of erronous SYNC bits. */
+ u32 ber_error_count; /* Number of erroneous SYNC bits. */
u32 ber_bit_count; /* Total number of SYNC bits. */
u32 ts_per; /* Transport stream PER,
0xFFFFFFFF indicate N/A */
diff --git a/drivers/media/common/siano/smsdvb.h b/drivers/media/common/siano/smsdvb.h
index 92c413b..ae36d0a 100644
--- a/drivers/media/common/siano/smsdvb.h
+++ b/drivers/media/common/siano/smsdvb.h
@@ -95,7 +95,7 @@ struct RECEPTION_STATISTICS_PER_SLICES_S {
u32 is_demod_locked; /* 0 - not locked, 1 - locked */
u32 ber_bit_count; /* Total number of SYNC bits. */
- u32 ber_error_count; /* Number of erronous SYNC bits. */
+ u32 ber_error_count; /* Number of erroneous SYNC bits. */
s32 MRC_SNR; /* dB */
s32 mrc_in_band_pwr; /* In band power in dBM */
diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c
index 58de441..53ee319 100644
--- a/drivers/media/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb-core/dvb_demux.c
@@ -435,7 +435,7 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf)
dprintk_tscheck("TEI detected. "
"PID=0x%x data1=0x%x\n",
pid, buf[1]);
- /* data in this packet cant be trusted - drop it unless
+ /* data in this packet can't be trusted - drop it unless
* module option dvb_demux_feed_err_pkts is set */
if (!dvb_demux_feed_err_pkts)
return;
diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c
index 9053614..6dbbee4 100644
--- a/drivers/media/dvb-frontends/dib8000.c
+++ b/drivers/media/dvb-frontends/dib8000.c
@@ -3048,7 +3048,7 @@ static int dib8000_tune(struct dvb_frontend *fe)
dib8000_set_diversity_in(state->fe[0], state->diversity_onoff);
locks = (dib8000_read_word(state, 180) >> 6) & 0x3f; /* P_coff_winlen ? */
- /* coff should lock over P_coff_winlen ofdm symbols : give 3 times this lenght to lock */
+ /* coff should lock over P_coff_winlen ofdm symbols : give 3 times this length to lock */
*timeout = dib8000_get_timeout(state, 2 * locks, SYMBOL_DEPENDENT_ON);
*tune_state = CT_DEMOD_STEP_5;
break;
@@ -3115,7 +3115,7 @@ static int dib8000_tune(struct dvb_frontend *fe)
case CT_DEMOD_STEP_9: /* 39 */
if ((state->revision == 0x8090) || ((dib8000_read_word(state, 1291) >> 9) & 0x1)) { /* fe capable of deinterleaving : esram */
- /* defines timeout for mpeg lock depending on interleaver lenght of longest layer */
+ /* defines timeout for mpeg lock depending on interleaver length of longest layer */
for (i = 0; i < 3; i++) {
if (c->layer[i].interleaving >= deeper_interleaver) {
dprintk("layer%i: time interleaver = %d ", i, c->layer[i].interleaving);
diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c
index d416c15..bf29a3f 100644
--- a/drivers/media/dvb-frontends/drxk_hard.c
+++ b/drivers/media/dvb-frontends/drxk_hard.c
@@ -1191,7 +1191,7 @@ static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable)
goto error;
if (state->m_enable_parallel == true) {
- /* paralel -> enable MD1 to MD7 */
+ /* parallel -> enable MD1 to MD7 */
status = write16(state, SIO_PDR_MD1_CFG__A,
sio_pdr_mdx_cfg);
if (status < 0)
@@ -1428,7 +1428,7 @@ static int mpegts_stop(struct drxk_state *state)
dprintk(1, "\n");
- /* Gracefull shutdown (byte boundaries) */
+ /* Graceful shutdown (byte boundaries) */
status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode);
if (status < 0)
goto error;
@@ -2021,7 +2021,7 @@ static int mpegts_dto_setup(struct drxk_state *state,
fec_oc_dto_burst_len = 204;
}
- /* Check serial or parrallel output */
+ /* Check serial or parallel output */
fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M));
if (state->m_enable_parallel == false) {
/* MPEG data output is serial -> set ipr_mode[0] */
@@ -2908,7 +2908,7 @@ static int adc_synchronization(struct drxk_state *state)
goto error;
if (count == 1) {
- /* Try sampling on a diffrent edge */
+ /* Try sampling on a different edge */
u16 clk_neg = 0;
status = read16(state, IQM_AF_CLKNEG__A, &clk_neg);
@@ -3306,7 +3306,7 @@ static int dvbt_sc_command(struct drxk_state *state,
if (status < 0)
goto error;
- /* Retreive results parameters from SC */
+ /* Retrieve results parameters from SC */
switch (cmd) {
/* All commands yielding 5 results */
/* All commands yielding 4 results */
@@ -3849,7 +3849,7 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
break;
}
#if 0
- /* No hierachical channels support in BDA */
+ /* No hierarchical channels support in BDA */
/* Priority (only for hierarchical channels) */
switch (channel->priority) {
case DRX_PRIORITY_LOW:
@@ -4081,7 +4081,7 @@ error:
/*============================================================================*/
/**
-* \brief Retreive lock status .
+* \brief Retrieve lock status .
* \param demod Pointer to demodulator instance.
* \param lockStat Pointer to lock status structure.
* \return DRXStatus_t.
@@ -6174,7 +6174,7 @@ static int init_drxk(struct drxk_state *state)
goto error;
/* Stamp driver version number in SCU data RAM in BCD code
- Done to enable field application engineers to retreive drxdriver version
+ Done to enable field application engineers to retrieve drxdriver version
via I2C from SCU RAM.
Not using SCU command interface for SCU register access since no
microcode may be present.
@@ -6399,7 +6399,7 @@ static int drxk_set_parameters(struct dvb_frontend *fe)
fe->ops.tuner_ops.get_if_frequency(fe, &IF);
start(state, 0, IF);
- /* After set_frontend, stats aren't avaliable */
+ /* After set_frontend, stats aren't available */
p->strength.stat[0].scale = FE_SCALE_RELATIVE;
p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index d18be19..cbc9ee9 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -646,7 +646,7 @@ config VIDEO_UPD64083
To compile this driver as a module, choose M here: the
module will be called upd64083.
-comment "Miscelaneous helper chips"
+comment "Miscellaneous helper chips"
config VIDEO_THS7303
tristate "THS7303/53 Video Amplifier"
diff --git a/drivers/media/i2c/adv7183.c b/drivers/media/i2c/adv7183.c
index 6f738d8..d45e0e3 100644
--- a/drivers/media/i2c/adv7183.c
+++ b/drivers/media/i2c/adv7183.c
@@ -178,7 +178,7 @@ static int adv7183_log_status(struct v4l2_subdev *sd)
adv7183_read(sd, ADV7183_VS_FIELD_CTRL_1),
adv7183_read(sd, ADV7183_VS_FIELD_CTRL_2),
adv7183_read(sd, ADV7183_VS_FIELD_CTRL_3));
- v4l2_info(sd, "adv7183: Hsync positon control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n",
+ v4l2_info(sd, "adv7183: Hsync position control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n",
adv7183_read(sd, ADV7183_HS_POS_CTRL_1),
adv7183_read(sd, ADV7183_HS_POS_CTRL_2),
adv7183_read(sd, ADV7183_HS_POS_CTRL_3));
diff --git a/drivers/media/i2c/adv7183_regs.h b/drivers/media/i2c/adv7183_regs.h
index 4a5b7d2..b253d40 100644
--- a/drivers/media/i2c/adv7183_regs.h
+++ b/drivers/media/i2c/adv7183_regs.h
@@ -52,9 +52,9 @@
#define ADV7183_VS_FIELD_CTRL_1 0x31 /* Vsync field control 1 */
#define ADV7183_VS_FIELD_CTRL_2 0x32 /* Vsync field control 2 */
#define ADV7183_VS_FIELD_CTRL_3 0x33 /* Vsync field control 3 */
-#define ADV7183_HS_POS_CTRL_1 0x34 /* Hsync positon control 1 */
-#define ADV7183_HS_POS_CTRL_2 0x35 /* Hsync positon control 2 */
-#define ADV7183_HS_POS_CTRL_3 0x36 /* Hsync positon control 3 */
+#define ADV7183_HS_POS_CTRL_1 0x34 /* Hsync position control 1 */
+#define ADV7183_HS_POS_CTRL_2 0x35 /* Hsync position control 2 */
+#define ADV7183_HS_POS_CTRL_3 0x36 /* Hsync position control 3 */
#define ADV7183_POLARITY 0x37 /* Polarity */
#define ADV7183_NTSC_COMB_CTRL 0x38 /* NTSC comb control */
#define ADV7183_PAL_COMB_CTRL 0x39 /* PAL comb control */
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index fbfdd2f..a324106b 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -877,7 +877,7 @@ static void configure_custom_video_timings(struct v4l2_subdev *sd,
break;
case ADV7604_MODE_HDMI:
/* set default prim_mode/vid_std for HDMI
- accoring to [REF_03, c. 4.2] */
+ according to [REF_03, c. 4.2] */
io_write(sd, 0x00, 0x02); /* video std */
io_write(sd, 0x01, 0x06); /* prim mode */
break;
diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index d174890..b50b073 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -1019,7 +1019,7 @@ static void configure_custom_video_timings(struct v4l2_subdev *sd,
break;
case ADV7842_MODE_HDMI:
/* set default prim_mode/vid_std for HDMI
- accoring to [REF_03, c. 4.2] */
+ according to [REF_03, c. 4.2] */
io_write(sd, 0x00, 0x02); /* video std */
io_write(sd, 0x01, 0x06); /* prim mode */
break;
diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c
index 82bf567..99ee456 100644
--- a/drivers/media/i2c/ir-kbd-i2c.c
+++ b/drivers/media/i2c/ir-kbd-i2c.c
@@ -394,7 +394,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (!rc) {
/*
- * If platform_data doesn't specify rc_dev, initilize it
+ * If platform_data doesn't specify rc_dev, initialize it
* internally
*/
rc = rc_allocate_device();
diff --git a/drivers/media/i2c/m5mols/m5mols_controls.c b/drivers/media/i2c/m5mols/m5mols_controls.c
index f34429e..a60931e 100644
--- a/drivers/media/i2c/m5mols/m5mols_controls.c
+++ b/drivers/media/i2c/m5mols/m5mols_controls.c
@@ -544,7 +544,7 @@ int m5mols_init_controls(struct v4l2_subdev *sd)
u16 zoom_step;
int ret;
- /* Determine the firmware dependant control range and step values */
+ /* Determine the firmware dependent control range and step values */
ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &exposure_max);
if (ret < 0)
return ret;
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
index b76ec0e..fa5913d 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
+++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
@@ -1460,7 +1460,7 @@ static int s5c73m3_oif_registered(struct v4l2_subdev *sd)
mutex_unlock(&state->lock);
v4l2_dbg(1, s5c73m3_dbg, sd, "%s: Booting %s (%d)\n",
- __func__, ret ? "failed" : "succeded", ret);
+ __func__, ret ? "failed" : "succeeded", ret);
return ret;
}
@@ -1651,7 +1651,7 @@ static int s5c73m3_probe(struct i2c_client *client,
if (ret < 0)
goto out_err;
- v4l2_info(sd, "%s: completed succesfully\n", __func__);
+ v4l2_info(sd, "%s: completed successfully\n", __func__);
return 0;
out_err:
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h
index 9d2c086..9dfa516 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3.h
+++ b/drivers/media/i2c/s5c73m3/s5c73m3.h
@@ -393,7 +393,7 @@ struct s5c73m3 {
/* External master clock frequency */
u32 mclk_frequency;
- /* Video bus type - MIPI-CSI2/paralell */
+ /* Video bus type - MIPI-CSI2/parallel */
enum v4l2_mbus_type bus_type;
const struct s5c73m3_frame_size *sensor_pix_size[2];
diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
index 637d026..afdbcb0 100644
--- a/drivers/media/i2c/saa7115.c
+++ b/drivers/media/i2c/saa7115.c
@@ -1699,7 +1699,7 @@ static void saa711x_write_platform_data(struct saa711x_state *state,
* the analog demod.
* If the tuner is not found, it returns -ENODEV.
* If auto-detection is disabled and the tuner doesn't match what it was
- * requred, it returns -EINVAL and fills 'name'.
+ * required, it returns -EINVAL and fills 'name'.
* If the chip is found, it returns the chip ID and fills 'name'.
*/
static int saa711x_detect_chip(struct i2c_client *client,
diff --git a/drivers/media/i2c/soc_camera/ov5642.c b/drivers/media/i2c/soc_camera/ov5642.c
index 0a5c5d4..d2daa6a 100644
--- a/drivers/media/i2c/soc_camera/ov5642.c
+++ b/drivers/media/i2c/soc_camera/ov5642.c
@@ -642,7 +642,7 @@ static const struct ov5642_datafmt
static int reg_read(struct i2c_client *client, u16 reg, u8 *val)
{
int ret;
- /* We have 16-bit i2c addresses - care for endianess */
+ /* We have 16-bit i2c addresses - care for endianness */
unsigned char data[2] = { reg >> 8, reg & 0xff };
ret = i2c_master_send(client, data, 2);
diff --git a/drivers/media/pci/cx18/cx18-driver.h b/drivers/media/pci/cx18/cx18-driver.h
index 2767c64..57f4688 100644
--- a/drivers/media/pci/cx18/cx18-driver.h
+++ b/drivers/media/pci/cx18/cx18-driver.h
@@ -262,7 +262,7 @@ struct cx18_options {
};
/* per-mdl bit flags */
-#define CX18_F_M_NEED_SWAP 0 /* mdl buffer data must be endianess swapped */
+#define CX18_F_M_NEED_SWAP 0 /* mdl buffer data must be endianness swapped */
/* per-stream, s_flags */
#define CX18_F_S_CLAIMED 3 /* this stream is claimed */
diff --git a/drivers/media/pci/cx23885/cx23885-417.c b/drivers/media/pci/cx23885/cx23885-417.c
index e3fc2c7..95666ee 100644
--- a/drivers/media/pci/cx23885/cx23885-417.c
+++ b/drivers/media/pci/cx23885/cx23885-417.c
@@ -427,7 +427,7 @@ int mc417_register_read(struct cx23885_dev *dev, u16 address, u32 *value)
cx_write(MC417_RWD, regval);
/* Transition RD to effect read transaction across bus.
- * Transtion 0x5000 -> 0x9000 correct (RD/RDY -> WR/RDY)?
+ * Transition 0x5000 -> 0x9000 correct (RD/RDY -> WR/RDY)?
* Should it be 0x9000 -> 0xF000 (also why is RDY being set, its
* input only...)
*/
diff --git a/drivers/media/pci/pluto2/pluto2.c b/drivers/media/pci/pluto2/pluto2.c
index 8164d74..655d6854 100644
--- a/drivers/media/pci/pluto2/pluto2.c
+++ b/drivers/media/pci/pluto2/pluto2.c
@@ -401,7 +401,7 @@ static int pluto_hw_init(struct pluto *pluto)
/* set automatic LED control by FPGA */
pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED);
- /* set data endianess */
+ /* set data endianness */
#ifdef __LITTLE_ENDIAN
pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END);
#else
diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c
index 449d2fe..53f2948 100644
--- a/drivers/media/platform/coda.c
+++ b/drivers/media/platform/coda.c
@@ -1357,7 +1357,7 @@ static void coda_buf_queue(struct vb2_buffer *vb)
if (q_data->fourcc == V4L2_PIX_FMT_H264 &&
vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
/*
- * For backwards compatiblity, queuing an empty buffer marks
+ * For backwards compatibility, queuing an empty buffer marks
* the stream end
*/
if (vb2_get_plane_payload(vb, 0) == 0)
diff --git a/drivers/media/platform/exynos4-is/fimc-core.c b/drivers/media/platform/exynos4-is/fimc-core.c
index 3d66d88..f791569 100644
--- a/drivers/media/platform/exynos4-is/fimc-core.c
+++ b/drivers/media/platform/exynos4-is/fimc-core.c
@@ -1039,7 +1039,7 @@ static int fimc_runtime_resume(struct device *dev)
dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state);
- /* Enable clocks and perform basic initalization */
+ /* Enable clocks and perform basic initialization */
clk_enable(fimc->clock[CLK_GATE]);
fimc_hw_reset(fimc);
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index a835112..d1b6626 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -759,7 +759,7 @@ static int fimc_md_register_platform_entity(struct fimc_md *fmd,
goto dev_unlock;
drvdata = dev_get_drvdata(dev);
- /* Some subdev didn't probe succesfully id drvdata is NULL */
+ /* Some subdev didn't probe successfully id drvdata is NULL */
if (drvdata) {
switch (plat_entity) {
case IDX_FIMC:
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index df3a0ec..7d9592c 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -1673,7 +1673,7 @@ void omap3isp_print_status(struct isp_device *isp)
* ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
* resume(), and the the pipelines are restarted in complete().
*
- * TODO: PM dependencies between the ISP and sensors are not modeled explicitly
+ * TODO: PM dependencies between the ISP and sensors are not modelled explicitly
* yet.
*/
static int isp_pm_prepare(struct device *dev)
diff --git a/drivers/media/platform/s5p-mfc/regs-mfc.h b/drivers/media/platform/s5p-mfc/regs-mfc.h
index 9319e93..6ccc3f8 100644
--- a/drivers/media/platform/s5p-mfc/regs-mfc.h
+++ b/drivers/media/platform/s5p-mfc/regs-mfc.h
@@ -382,7 +382,7 @@
#define S5P_FIMV_R2H_CMD_EDFU_INIT_RET 16
#define S5P_FIMV_R2H_CMD_ERR_RET 32
-/* Dummy definition for MFCv6 compatibilty */
+/* Dummy definition for MFCv6 compatibility */
#define S5P_FIMV_CODEC_H264_MVC_DEC -1
#define S5P_FIMV_R2H_CMD_FIELD_DONE_RET -1
#define S5P_FIMV_MFC_RESET -1
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 084263d..e500718 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -239,7 +239,7 @@ static void s5p_mfc_handle_frame_copy_time(struct s5p_mfc_ctx *ctx)
frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_dec_frame_type, dev);
/* Copy timestamp / timecode from decoded src to dst and set
- appropraite flags */
+ appropriate flags */
src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
list_for_each_entry(dst_buf, &ctx->dst_queue, list) {
if (vb2_dma_contig_plane_dma_addr(dst_buf->b, 0) == dec_y_addr) {
@@ -424,7 +424,7 @@ static void s5p_mfc_handle_error(struct s5p_mfc_dev *dev,
case MFCINST_FINISHING:
case MFCINST_FINISHED:
case MFCINST_RUNNING:
- /* It is higly probable that an error occured
+ /* It is highly probable that an error occurred
* while decoding a frame */
clear_work_bit(ctx);
ctx->state = MFCINST_ERROR;
@@ -607,7 +607,7 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv)
mfc_debug(1, "Int reason: %d (err: %08x)\n", reason, err);
switch (reason) {
case S5P_MFC_R2H_CMD_ERR_RET:
- /* An error has occured */
+ /* An error has occurred */
if (ctx->state == MFCINST_RUNNING &&
s5p_mfc_hw_call(dev->mfc_ops, err_dec, err) >=
dev->warn_start)
@@ -836,7 +836,7 @@ static int s5p_mfc_open(struct file *file)
mutex_unlock(&dev->mfc_mutex);
mfc_debug_leave();
return ret;
- /* Deinit when failure occured */
+ /* Deinit when failure occurred */
err_queue_init:
if (dev->num_inst == 1)
s5p_mfc_deinit_hw(dev);
@@ -877,14 +877,14 @@ static int s5p_mfc_release(struct file *file)
/* Mark context as idle */
clear_work_bit_irqsave(ctx);
/* If instance was initialised then
- * return instance and free reosurces */
+ * return instance and free resources */
if (ctx->inst_no != MFC_NO_INSTANCE_SET) {
mfc_debug(2, "Has to free instance\n");
ctx->state = MFCINST_RETURN_INST;
set_work_bit_irqsave(ctx);
s5p_mfc_clean_ctx_int_flags(ctx);
s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
- /* Wait until instance is returned or timeout occured */
+ /* Wait until instance is returned or timeout occurred */
if (s5p_mfc_wait_for_done_ctx
(ctx, S5P_MFC_R2H_CMD_CLOSE_INSTANCE_RET, 0)) {
s5p_mfc_clock_off();
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
index 7cab684..2475a3c 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
@@ -69,7 +69,7 @@ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev)
} else {
/* In this case bank2 can point to the same address as bank1.
- * Firmware will always occupy the beggining of this area so it is
+ * Firmware will always occupy the beginning of this area so it is
* impossible having a video frame buffer with zero address. */
dev->bank2 = dev->bank1;
}
diff --git a/drivers/media/platform/s5p-tv/mixer.h b/drivers/media/platform/s5p-tv/mixer.h
index 04e6490..fb2acc5 100644
--- a/drivers/media/platform/s5p-tv/mixer.h
+++ b/drivers/media/platform/s5p-tv/mixer.h
@@ -65,7 +65,7 @@ struct mxr_format {
int num_subframes;
/** specifies to which subframe belong given plane */
int plane2subframe[MXR_MAX_PLANES];
- /** internal code, driver dependant */
+ /** internal code, driver dependent */
unsigned long cookie;
};
diff --git a/drivers/media/platform/s5p-tv/mixer_video.c b/drivers/media/platform/s5p-tv/mixer_video.c
index 641b1f0..81b97db 100644
--- a/drivers/media/platform/s5p-tv/mixer_video.c
+++ b/drivers/media/platform/s5p-tv/mixer_video.c
@@ -528,7 +528,7 @@ static int mxr_s_dv_timings(struct file *file, void *fh,
mutex_lock(&mdev->mutex);
/* timings change cannot be done while there is an entity
- * dependant on output configuration
+ * dependent on output configuration
*/
if (mdev->n_output > 0) {
mutex_unlock(&mdev->mutex);
@@ -585,7 +585,7 @@ static int mxr_s_std(struct file *file, void *fh, v4l2_std_id norm)
mutex_lock(&mdev->mutex);
/* standard change cannot be done while there is an entity
- * dependant on output configuration
+ * dependent on output configuration
*/
if (mdev->n_output > 0) {
mutex_unlock(&mdev->mutex);
diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c
index 6769193..74ce8b6 100644
--- a/drivers/media/platform/soc_camera/omap1_camera.c
+++ b/drivers/media/platform/soc_camera/omap1_camera.c
@@ -1495,7 +1495,7 @@ static int omap1_cam_set_bus_param(struct soc_camera_device *icd)
if (ctrlclock & LCLK_EN)
CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
- /* select bus endianess */
+ /* select bus endianness */
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
fmt = xlate->host_fmt;
diff --git a/drivers/media/platform/vivi.c b/drivers/media/platform/vivi.c
index 1d3f119..2d4e73b 100644
--- a/drivers/media/platform/vivi.c
+++ b/drivers/media/platform/vivi.c
@@ -1108,7 +1108,7 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
return 0;
}
-/* timeperframe is arbitrary and continous */
+/* timeperframe is arbitrary and continuous */
static int vidioc_enum_frameintervals(struct file *file, void *priv,
struct v4l2_frmivalenum *fival)
{
@@ -1125,7 +1125,7 @@ static int vidioc_enum_frameintervals(struct file *file, void *priv,
fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS;
- /* fill in stepwise (step=1.0 is requred by V4L2 spec) */
+ /* fill in stepwise (step=1.0 is required by V4L2 spec) */
fival->stepwise.min = tpf_min;
fival->stepwise.max = tpf_max;
fival->stepwise.step = (struct v4l2_fract) {1, 1};
diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
index 1c9e771..d16bf0f 100644
--- a/drivers/media/platform/vsp1/vsp1_drv.c
+++ b/drivers/media/platform/vsp1/vsp1_drv.c
@@ -323,7 +323,7 @@ static void vsp1_clocks_disable(struct vsp1_device *vsp1)
* Increment the VSP1 reference count and initialize the device if the first
* reference is taken.
*
- * Return a pointer to the VSP1 device or NULL if an error occured.
+ * Return a pointer to the VSP1 device or NULL if an error occurred.
*/
struct vsp1_device *vsp1_device_get(struct vsp1_device *vsp1)
{
diff --git a/drivers/media/radio/radio-si476x.c b/drivers/media/radio/radio-si476x.c
index 9c9084c..2fd9009 100644
--- a/drivers/media/radio/radio-si476x.c
+++ b/drivers/media/radio/radio-si476x.c
@@ -268,8 +268,8 @@ struct si476x_radio;
*
* @tune_freq: Tune chip to a specific frequency
* @seek_start: Star station seeking
- * @rsq_status: Get Recieved Signal Quality(RSQ) status
- * @rds_blckcnt: Get recived RDS blocks count
+ * @rsq_status: Get Received Signal Quality(RSQ) status
+ * @rds_blckcnt: Get received RDS blocks count
* @phase_diversity: Change phase diversity mode of the tuner
* @phase_div_status: Get phase diversity mode status
* @acf_status: Get the status of Automatically Controlled
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 72e3fa6..f329485 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1370,7 +1370,7 @@ static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
* 0x68nnnnB7 to 0x6AnnnnB7, the left mouse button generates
* 0x688301b7 and the right one 0x688481b7. All other keys generate
* 0x2nnnnnnn. Position coordinate is encoded in buf[1] and buf[2] with
- * reversed endianess. Extract direction from buffer, rotate endianess,
+ * reversed endianness. Extract direction from buffer, rotate endianness,
* adjust sign and feed the values into stabilize(). The resulting codes
* will be 0x01008000, 0x01007F00, which match the newer devices.
*/
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 094484f..a5d4f88 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -118,7 +118,7 @@ static int debug;
#define RR3_IR_IO_LENGTH_FUZZ 0x04
/* Timeout for end of signal detection */
#define RR3_IR_IO_SIG_TIMEOUT 0x05
-/* Minumum value for pause recognition. */
+/* Minimum value for pause recognition. */
#define RR3_IR_IO_MIN_PAUSE 0x06
/* Clock freq. of EZ-USB chip */
diff --git a/drivers/media/tuners/mt2063.c b/drivers/media/tuners/mt2063.c
index 2e1a02e..20cca40 100644
--- a/drivers/media/tuners/mt2063.c
+++ b/drivers/media/tuners/mt2063.c
@@ -1195,7 +1195,7 @@ static u32 mt2063_set_dnc_output_enable(struct mt2063_state *state,
* DNC Output is selected, the other is always off)
*
* @state: ptr to mt2063_state structure
- * @Mode: desired reciever delivery system
+ * @Mode: desired receiver delivery system
*
* Note: Register cache must be valid for it to work
*/
@@ -2119,7 +2119,7 @@ static int mt2063_set_analog_params(struct dvb_frontend *fe,
/*
* As defined on EN 300 429, the DVB-C roll-off factor is 0.15.
- * So, the amount of the needed bandwith is given by:
+ * So, the amount of the needed bandwidth is given by:
* Bw = Symbol_rate * (1 + 0.15)
* As such, the maximum symbol rate supported by 6 MHz is given by:
* max_symbol_rate = 6 MHz / 1.15 = 5217391 Bauds
diff --git a/drivers/media/tuners/tuner-xc2028-types.h b/drivers/media/tuners/tuner-xc2028-types.h
index 74dc46a..7e47987 100644
--- a/drivers/media/tuners/tuner-xc2028-types.h
+++ b/drivers/media/tuners/tuner-xc2028-types.h
@@ -119,7 +119,7 @@
#define V4L2_STD_A2 (V4L2_STD_A2_A | V4L2_STD_A2_B)
#define V4L2_STD_NICAM (V4L2_STD_NICAM_A | V4L2_STD_NICAM_B)
-/* To preserve backward compatibilty,
+/* To preserve backward compatibility,
(std & V4L2_STD_AUDIO) = 0 means that ALL audio stds are supported
*/
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
index e97964e..8d7abf6 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
@@ -258,7 +258,7 @@ static int mxl111sf_adap_fe_init(struct dvb_frontend *fe)
struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id];
int err;
- /* exit if we didnt initialize the driver yet */
+ /* exit if we didn't initialize the driver yet */
if (!state->chip_id) {
mxl_debug("driver not yet initialized, exit.");
goto fail;
@@ -314,7 +314,7 @@ static int mxl111sf_adap_fe_sleep(struct dvb_frontend *fe)
struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id];
int err;
- /* exit if we didnt initialize the driver yet */
+ /* exit if we didn't initialize the driver yet */
if (!state->chip_id) {
mxl_debug("driver not yet initialized, exit.");
goto fail;
diff --git a/drivers/media/usb/gspca/gl860/gl860.c b/drivers/media/usb/gspca/gl860/gl860.c
index cb1e64c..cea8d7f 100644
--- a/drivers/media/usb/gspca/gl860/gl860.c
+++ b/drivers/media/usb/gspca/gl860/gl860.c
@@ -438,7 +438,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
s32 nToSkip =
sd->swapRB * (gspca_dev->cam.cam_mode[mode].bytesperline + 1);
- /* Test only against 0202h, so endianess does not matter */
+ /* Test only against 0202h, so endianness does not matter */
switch (*(s16 *) data) {
case 0x0202: /* End of frame, start a new one */
gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
diff --git a/drivers/media/usb/gspca/pac207.c b/drivers/media/usb/gspca/pac207.c
index cd79c18..07529e5 100644
--- a/drivers/media/usb/gspca/pac207.c
+++ b/drivers/media/usb/gspca/pac207.c
@@ -416,7 +416,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
#if IS_ENABLED(CONFIG_INPUT)
static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
u8 *data, /* interrupt packet data */
- int len) /* interrput packet length */
+ int len) /* interrupt packet length */
{
int ret = -EINVAL;
diff --git a/drivers/media/usb/gspca/pac7302.c b/drivers/media/usb/gspca/pac7302.c
index a915096..2fd1c5e 100644
--- a/drivers/media/usb/gspca/pac7302.c
+++ b/drivers/media/usb/gspca/pac7302.c
@@ -874,7 +874,7 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
#if IS_ENABLED(CONFIG_INPUT)
static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
u8 *data, /* interrupt packet data */
- int len) /* interrput packet length */
+ int len) /* interrupt packet length */
{
int ret = -EINVAL;
u8 data0, data1;
diff --git a/drivers/media/usb/gspca/stv0680.c b/drivers/media/usb/gspca/stv0680.c
index 9c08276..7f94ec7 100644
--- a/drivers/media/usb/gspca/stv0680.c
+++ b/drivers/media/usb/gspca/stv0680.c
@@ -139,7 +139,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam = &gspca_dev->cam;
- /* Give the camera some time to settle, otherwise initalization will
+ /* Give the camera some time to settle, otherwise initialization will
fail on hotplug, and yes it really needs a full second. */
msleep(1000);
diff --git a/drivers/media/usb/gspca/zc3xx.c b/drivers/media/usb/gspca/zc3xx.c
index 7b95d8e..d3e1b6d 100644
--- a/drivers/media/usb/gspca/zc3xx.c
+++ b/drivers/media/usb/gspca/zc3xx.c
@@ -6905,7 +6905,7 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev,
#if IS_ENABLED(CONFIG_INPUT)
static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
u8 *data, /* interrupt packet data */
- int len) /* interrput packet length */
+ int len) /* interrupt packet length */
{
if (len == 8 && data[4] == 1) {
input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
diff --git a/drivers/media/usb/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c
index 77bbf78..78c9bc8 100644
--- a/drivers/media/usb/pwc/pwc-if.c
+++ b/drivers/media/usb/pwc/pwc-if.c
@@ -1039,7 +1039,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
/* Set the leds off */
pwc_set_leds(pdev, 0, 0);
- /* Setup intial videomode */
+ /* Setup initial videomode */
rc = pwc_set_video_mode(pdev, MAX_WIDTH, MAX_HEIGHT,
V4L2_PIX_FMT_YUV420, 30, &compression, 1);
if (rc)
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 3394c34..97b3123 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -556,7 +556,7 @@ static u16 uvc_video_clock_host_sof(const struct uvc_clock_sample *sample)
*
* SOF = ((SOF2 - SOF1) * PTS + SOF1 * STC2 - SOF2 * STC1) / (STC2 - STC1) (1)
*
- * to avoid loosing precision in the division. Similarly, the host timestamp is
+ * to avoid losing precision in the division. Similarly, the host timestamp is
* computed with
*
* TS = ((TS2 - TS1) * PTS + TS1 * SOF2 - TS2 * SOF1) / (SOF2 - SOF1) (2)
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 60dcc0f..fb46790 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -420,7 +420,7 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
"Advanced Simple",
"Core",
"Simple Scalable",
- "Advanced Coding Efficency",
+ "Advanced Coding Efficiency",
NULL,
};
--
1.8.4
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2013-10-21 0:34 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-10-21 0:34 [PATCH] [TRIVIAL] [media] media_tree: Fix spelling errors Jonathan McCrohan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.