* [Buildroot] [PATCH v3 1/2] pcre: add UTF-8/16/32 support option
@ 2013-10-28 12:09 yegorslists at googlemail.com
2013-10-28 12:09 ` [Buildroot] [PATCH v3 2/2] ModemManager: add new package yegorslists at googlemail.com
0 siblings, 1 reply; 4+ messages in thread
From: yegorslists at googlemail.com @ 2013-10-28 12:09 UTC (permalink / raw)
To: buildroot
From: Yegor Yefremov <yegorslists@googlemail.com>
Add BR2_PACKAGE_PCRE_UTF option, that activates
--enable-unicode-properties for UTF-8/16/32.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
Changes:
v3: change option to "UTF-8/16/32 support"
package/pcre/Config.in | 5 +++++
package/pcre/pcre.mk | 1 +
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/package/pcre/Config.in b/package/pcre/Config.in
index dc92274..e49d693 100644
--- a/package/pcre/Config.in
+++ b/package/pcre/Config.in
@@ -19,4 +19,9 @@ config BR2_PACKAGE_PCRE_32
help
This option builds the 32-bits pcre library, i.e 'libpcre32'
+config BR2_PACKAGE_PCRE_UTF
+ bool "UTF-8/16/32 support"
+ help
+ This option enables UTF support
+
endif
diff --git a/package/pcre/pcre.mk b/package/pcre/pcre.mk
index bf86a3d..0d1d66b 100644
--- a/package/pcre/pcre.mk
+++ b/package/pcre/pcre.mk
@@ -19,5 +19,6 @@ endif
PCRE_CONF_OPT += --enable-pcre8
PCRE_CONF_OPT += $(if $(BR2_PACKAGE_PCRE_16),--enable-pcre16,--disable-pcre16)
PCRE_CONF_OPT += $(if $(BR2_PACKAGE_PCRE_32),--enable-pcre32,--disable-pcre32)
+PCRE_CONF_OPT += $(if $(BR2_PACKAGE_PCRE_UTF),--enable-unicode-properties,--disable-unicode-properties)
$(eval $(autotools-package))
--
1.7.7
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH v3 2/2] ModemManager: add new package
2013-10-28 12:09 [Buildroot] [PATCH v3 1/2] pcre: add UTF-8/16/32 support option yegorslists at googlemail.com
@ 2013-10-28 12:09 ` yegorslists at googlemail.com
2013-10-29 17:09 ` Arnout Vandecappelle
0 siblings, 1 reply; 4+ messages in thread
From: yegorslists at googlemail.com @ 2013-10-28 12:09 UTC (permalink / raw)
To: buildroot
From: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
Changes:
v3: depend on pcre, fix comments and indentation etc. (comments from Thomas Petazzoni)
v2: typos, add select QMI to the config option, don't install to staging
package/Config.in | 1 +
package/modem-manager/Config.in | 33 ++++++++++++++++++++++++++++++++
package/modem-manager/modem-manager.mk | 23 ++++++++++++++++++++++
3 files changed, 57 insertions(+), 0 deletions(-)
create mode 100644 package/modem-manager/Config.in
create mode 100644 package/modem-manager/modem-manager.mk
diff --git a/package/Config.in b/package/Config.in
index 0e6f86c..34c0e7b 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -820,6 +820,7 @@ source "package/lrzsz/Config.in"
source "package/macchanger/Config.in"
source "package/mii-diag/Config.in"
source "package/minidlna/Config.in"
+source "package/modem-manager/Config.in"
source "package/mongoose/Config.in"
source "package/mongrel2/Config.in"
source "package/mrouted/Config.in"
diff --git a/package/modem-manager/Config.in b/package/modem-manager/Config.in
new file mode 100644
index 0000000..0ee9ba1
--- /dev/null
+++ b/package/modem-manager/Config.in
@@ -0,0 +1,33 @@
+config BR2_PACKAGE_MODEM_MANAGER
+ bool "modemmanager"
+ depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+ select BR2_PACKAGE_DBUS
+ depends on BR2_INET_IPV6
+ depends on BR2_LARGEFILE # acl
+ depends on BR2_USE_WCHAR # libglib2 and gnutls
+ depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, libglib2
+ depends on BR2_USE_MMU # dbus
+ select BR2_PACKAGE_DBUS_GLIB
+ select BR2_PACKAGE_UDEV
+ select BR2_PACKAGE_UDEV_ALL_EXTRAS
+ select BR2_PACKAGE_PCRE
+ select BR2_PACKAGE_PCRE_UTF
+ help
+ ModemManager is a DBus-activated daemon which controls mobile
+ broadband (2G/3G/4G) devices and connections.
+
+ http://www.freedesktop.org/wiki/Software/ModemManager/
+
+if BR2_PACKAGE_MODEM_MANAGER
+
+config BR2_PACKAGE_MODEM_MANAGER_LIBQMI
+ bool "QMI support"
+ select BR2_PACKAGE_LIBQMI
+ help
+ This option enables support for QMI protocol
+endif
+
+comment "modemmanager requires a toolchain with IPV6, LARGEFILE, WCHAR and thread support and the udev infrastructure"
+ depends on !BR2_INET_IPV6 || !BR2_LARGEFILE || !BR2_USE_WCHAR || \
+ !BR2_TOOLCHAIN_HAS_THREADS || !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+
diff --git a/package/modem-manager/modem-manager.mk b/package/modem-manager/modem-manager.mk
new file mode 100644
index 0000000..f43a598
--- /dev/null
+++ b/package/modem-manager/modem-manager.mk
@@ -0,0 +1,23 @@
+################################################################################
+#
+# modem-manager
+#
+################################################################################
+
+MODEM_MANAGER_VERSION = 1.0.0
+MODEM_MANAGER_SOURCE = ModemManager-$(MODEM_MANAGER_VERSION).tar.xz
+MODEM_MANAGER_SITE = http://www.freedesktop.org/software/ModemManager/
+MODEM_MANAGER_LICENSE = GPLv2
+MODEM_MANAGER_LICENSE_FILES = COPYING
+MODEM_MANAGER_DEPENDENCIES = host-pkgconf udev dbus-glib host-intltool pcre
+
+MODEM_MANAGER_CONF_OPT = --without-mbim
+
+ifeq ($(BR2_PACKAGE_MODEM_MANAGER_LIBQMI),y)
+ MODEM_MANAGER_DEPENDENCIES += libqmi
+ MODEM_MANAGER_CONF_OPT += --with-qmi
+else
+ MODEM_MANAGER_CONF_OPT += --without-qmi
+endif
+
+$(eval $(autotools-package))
--
1.7.7
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH v3 2/2] ModemManager: add new package
2013-10-28 12:09 ` [Buildroot] [PATCH v3 2/2] ModemManager: add new package yegorslists at googlemail.com
@ 2013-10-29 17:09 ` Arnout Vandecappelle
2013-10-30 7:48 ` Yegor Yefremov
0 siblings, 1 reply; 4+ messages in thread
From: Arnout Vandecappelle @ 2013-10-29 17:09 UTC (permalink / raw)
To: buildroot
On 28/10/13 13:09, yegorslists at googlemail.com wrote:
[snip]
> +comment "modemmanager requires a toolchain with IPV6, LARGEFILE, WCHAR and thread support and the udev infrastructure"
> + depends on !BR2_INET_IPV6 || !BR2_LARGEFILE || !BR2_USE_WCHAR || \
> + !BR2_TOOLCHAIN_HAS_THREADS || !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
We've standardized this type of comment into
comment "modemmanager needs udev and a toolchain w/ largefile, wchar, threads, IPv6"
Regards,
Arnout
[snip]
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH v3 2/2] ModemManager: add new package
2013-10-29 17:09 ` Arnout Vandecappelle
@ 2013-10-30 7:48 ` Yegor Yefremov
0 siblings, 0 replies; 4+ messages in thread
From: Yegor Yefremov @ 2013-10-30 7:48 UTC (permalink / raw)
To: buildroot
On Tue, Oct 29, 2013 at 6:09 PM, Arnout Vandecappelle <arnout@mind.be> wrote:
> On 28/10/13 13:09, yegorslists at googlemail.com wrote:
> [snip]
>> +comment "modemmanager requires a toolchain with IPV6, LARGEFILE, WCHAR and thread support and the udev infrastructure"
>> + depends on !BR2_INET_IPV6 || !BR2_LARGEFILE || !BR2_USE_WCHAR || \
>> + !BR2_TOOLCHAIN_HAS_THREADS || !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
>
> We've standardized this type of comment into
>
> comment "modemmanager needs udev and a toolchain w/ largefile, wchar, threads, IPv6"
Thanks. Will send v4
Yegor
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-10-30 7:48 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-10-28 12:09 [Buildroot] [PATCH v3 1/2] pcre: add UTF-8/16/32 support option yegorslists at googlemail.com
2013-10-28 12:09 ` [Buildroot] [PATCH v3 2/2] ModemManager: add new package yegorslists at googlemail.com
2013-10-29 17:09 ` Arnout Vandecappelle
2013-10-30 7:48 ` Yegor Yefremov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.