* [PATCH 03/05] selinux_current_policy_path will return none on a disabled SELinux system
@ 2013-11-13 15:43 Dan Walsh
2013-11-13 15:43 ` [PATCH 04/05] Add -P semodule option to man page Dan Walsh
2013-11-13 15:43 ` [PATCH 05/05] Verify type being passed into semanage permissive is a valid domain Dan Walsh
0 siblings, 2 replies; 5+ messages in thread
From: Dan Walsh @ 2013-11-13 15:43 UTC (permalink / raw)
To: sds, eparis; +Cc: selinux, Dan Walsh
---
policycoreutils/audit2allow/sepolgen-ifgen | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/policycoreutils/audit2allow/sepolgen-ifgen b/policycoreutils/audit2allow/sepolgen-ifgen
index 3967ba5..83c7ecf 100644
--- a/policycoreutils/audit2allow/sepolgen-ifgen
+++ b/policycoreutils/audit2allow/sepolgen-ifgen
@@ -63,7 +63,7 @@ def parse_options():
def get_policy():
p = selinux.selinux_current_policy_path()
- if os.path.exists(p):
+ if p and os.path.exists(p):
return p
i = selinux.security_policyvers()
p = selinux.selinux_binary_policy_path() + "." + str(i)
--
1.8.4.2
--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 04/05] Add -P semodule option to man page
2013-11-13 15:43 [PATCH 03/05] selinux_current_policy_path will return none on a disabled SELinux system Dan Walsh
@ 2013-11-13 15:43 ` Dan Walsh
2013-11-13 16:18 ` Stephen Smalley
2013-11-13 15:43 ` [PATCH 05/05] Verify type being passed into semanage permissive is a valid domain Dan Walsh
1 sibling, 1 reply; 5+ messages in thread
From: Dan Walsh @ 2013-11-13 15:43 UTC (permalink / raw)
To: sds, eparis; +Cc: selinux, Dan Walsh
---
policycoreutils/semodule/semodule.8 | 3 +++
1 file changed, 3 insertions(+)
diff --git a/policycoreutils/semodule/semodule.8 b/policycoreutils/semodule/semodule.8
index 35277e9..2a91697 100644
--- a/policycoreutils/semodule/semodule.8
+++ b/policycoreutils/semodule/semodule.8
@@ -59,6 +59,9 @@ do not reload policy after commit
.B \-h,\-\-help
prints help message and quit
.TP
+.B \-P,\-\-preserve_tunables
+Preserve tunables in policy
+.TP
.B \-v,\-\-verbose
be verbose
--
1.8.4.2
--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 05/05] Verify type being passed into semanage permissive is a valid domain.
2013-11-13 15:43 [PATCH 03/05] selinux_current_policy_path will return none on a disabled SELinux system Dan Walsh
2013-11-13 15:43 ` [PATCH 04/05] Add -P semodule option to man page Dan Walsh
@ 2013-11-13 15:43 ` Dan Walsh
2013-11-13 15:45 ` Daniel J Walsh
1 sibling, 1 reply; 5+ messages in thread
From: Dan Walsh @ 2013-11-13 15:43 UTC (permalink / raw)
To: sds, eparis; +Cc: selinux, Dan Walsh
Fix semanage login -a ... To default to the range of the selinux user if the range is not specified.
---
policycoreutils/semanage/semanage | 2 +-
policycoreutils/semanage/seobject/__init__.py | 2243 +++++++++++++++++++++++++
2 files changed, 2244 insertions(+), 1 deletion(-)
create mode 100644 policycoreutils/semanage/seobject/__init__.py
diff --git a/policycoreutils/semanage/semanage b/policycoreutils/semanage/semanage
index 36b41cd..99ca575 100644
--- a/policycoreutils/semanage/semanage
+++ b/policycoreutils/semanage/semanage
@@ -229,7 +229,7 @@ def parser_add_type(parser, name):
def parser_add_level(parser, name):
parser.add_argument('-L', '--level', default='s0', help=_('Default SELinux Level for SELinux user, s0 Default. (MLS/MCS Systems only)'))
def parser_add_range(parser, name):
- parser.add_argument('-r', '--range', default="s0",
+ parser.add_argument('-r', '--range', default=None,
help=_('''
MLS/MCS Security Range (MLS/MCS Systems only)
SELinux Range for SELinux login mapping
diff --git a/policycoreutils/semanage/seobject/__init__.py b/policycoreutils/semanage/seobject/__init__.py
new file mode 100644
index 0000000..5835ab1
--- /dev/null
+++ b/policycoreutils/semanage/seobject/__init__.py
@@ -0,0 +1,2243 @@
+#! /usr/bin/python -Es
+# Copyright (C) 2005-2013 Red Hat
+# see file 'COPYING' for use and warranty information
+#
+# semanage is a tool for managing SELinux configuration files
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+# 02111-1307 USA
+#
+#
+
+import pwd, grp, string, selinux, os, re, sys, stat
+from semanage import *;
+PROGNAME = "policycoreutils"
+import sepolicy
+from sepolicy import boolean_desc, boolean_category, gen_bool_dict
+gen_bool_dict()
+from IPy import IP
+
+import gettext
+PROGNAME="policycoreutils"
+gettext.bindtextdomain(PROGNAME, "/usr/share/locale")
+gettext.textdomain(PROGNAME)
+try:
+ gettext.install(PROGNAME,
+ unicode=True,
+ codeset = 'utf-8')
+except TypeError:
+ # Failover to python3 install
+ gettext.install(PROGNAME,
+ codeset = 'utf-8')
+except IOError:
+ import builtins
+ builtins.__dict__['_'] = str
+
+is_mls_enabled = True
+
+import syslog
+
+file_types = {}
+file_types[""] = SEMANAGE_FCONTEXT_ALL;
+file_types["all files"] = SEMANAGE_FCONTEXT_ALL;
+file_types["a"] = SEMANAGE_FCONTEXT_ALL;
+file_types["regular file"] = SEMANAGE_FCONTEXT_REG;
+file_types["--"] = SEMANAGE_FCONTEXT_REG;
+file_types["f"] = SEMANAGE_FCONTEXT_REG;
+file_types["-d"] = SEMANAGE_FCONTEXT_DIR;
+file_types["directory"] = SEMANAGE_FCONTEXT_DIR;
+file_types["d"] = SEMANAGE_FCONTEXT_DIR;
+file_types["-c"] = SEMANAGE_FCONTEXT_CHAR;
+file_types["character device"] = SEMANAGE_FCONTEXT_CHAR;
+file_types["c"] = SEMANAGE_FCONTEXT_CHAR;
+file_types["-b"] = SEMANAGE_FCONTEXT_BLOCK;
+file_types["block device"] = SEMANAGE_FCONTEXT_BLOCK;
+file_types["b"] = SEMANAGE_FCONTEXT_BLOCK;
+file_types["-s"] = SEMANAGE_FCONTEXT_SOCK;
+file_types["socket"] = SEMANAGE_FCONTEXT_SOCK;
+file_types["s"] = SEMANAGE_FCONTEXT_SOCK;
+file_types["-l"] = SEMANAGE_FCONTEXT_LINK;
+file_types["l"] = SEMANAGE_FCONTEXT_LINK;
+file_types["symbolic link"] = SEMANAGE_FCONTEXT_LINK;
+file_types["p"] = SEMANAGE_FCONTEXT_PIPE;
+file_types["-p"] = SEMANAGE_FCONTEXT_PIPE;
+file_types["named pipe"] = SEMANAGE_FCONTEXT_PIPE;
+
+file_type_str_to_option = { "all files": "a",
+ "regular file":"f",
+ "directory":"d",
+ "character device":"c",
+ "block device":"b",
+ "socket file":"s",
+ "symbolic link":"l",
+ "named pipe":"p" }
+try:
+ import audit
+ class logger:
+ def __init__(self):
+ self.audit_fd = audit.audit_open()
+ self.log_list = []
+ def log(self, msg, name = "", sename = "", serole = "", serange = "", oldsename = "", oldserole = "", oldserange = ""):
+
+ sep = "-"
+ if sename != oldsename:
+ msg += sep + "sename"; sep = ","
+ if serole != oldserole:
+ msg += sep + "role"; sep = ","
+ if serange != oldserange:
+ msg += sep + "range"; sep = ","
+
+ self.log_list.append([self.audit_fd, audit.AUDIT_ROLE_ASSIGN, sys.argv[0], str(msg), name, 0, sename, serole, serange, oldsename, oldserole, oldserange, "", "", ""])
+
+ def log_remove(self, msg, name = "", sename = "", serole = "", serange = "", oldsename = "", oldserole = "", oldserange = ""):
+ self.log_list.append([self.audit_fd, audit.AUDIT_ROLE_REMOVE, sys.argv[0], str(msg), name, 0, sename, serole, serange, oldsename, oldserole, oldserange, "", "", ""])
+
+ def commit(self,success):
+ for l in self.log_list:
+ audit.audit_log_semanage_message(*(l + [success]))
+ self.log_list = []
+except:
+ class logger:
+ def __init__(self):
+ self.log_list=[]
+
+ def log(self, msg, name = "", sename = "", serole = "", serange = "", oldsename = "", oldserole = "", oldserange = ""):
+ message = " %s name=%s" % (msg, name)
+ if sename != "":
+ message += " sename=" + sename
+ if oldsename != "":
+ message += " oldsename=" + oldsename
+ if serole != "":
+ message += " role=" + serole
+ if oldserole != "":
+ message += " old_role=" + oldserole
+ if serange != "" and serange != None:
+ message += " MLSRange=" + serange
+ if oldserange != "" and oldserange != None:
+ message += " old_MLSRange=" + oldserange
+ self.log_list.append(message)
+
+ def log_remove(self, msg, name = "", sename = "", serole = "", serange = "", oldsename = "", oldserole = "", oldserange = ""):
+ self.log(msg, name, sename, serole, serange, oldsename, oldserole, oldserange)
+
+ def commit(self,success):
+ if success == 1:
+ message = "Successful: "
+ else:
+ message = "Failed: "
+ for l in self.log_list:
+ syslog.syslog(syslog.LOG_INFO, message + l)
+
+class nulllogger:
+ def log(self, msg, name = "", sename = "", serole = "", serange = "", oldsename = "", oldserole = "", oldserange = ""):
+ pass
+
+ def log_remove(self, msg, name = "", sename = "", serole = "", serange = "", oldsename = "", oldserole = "", oldserange = ""):
+ pass
+
+ def commit(self,success):
+ pass
+
+def validate_level(raw):
+ sensitivity = "s[0-9]*"
+ category = "c[0-9]*"
+ cat_range = category + "(\." + category +")?"
+ categories = cat_range + "(\," + cat_range + ")*"
+ reg = sensitivity + "(-" + sensitivity + ")?" + "(:" + categories + ")?"
+ return re.search("^" + reg +"$", raw)
+
+def translate(raw, prepend = 1):
+ filler = "a:b:c:"
+ if prepend == 1:
+ context = "%s%s" % (filler, raw)
+ else:
+ context = raw
+ (rc, trans) = selinux.selinux_raw_to_trans_context(context)
+ if rc != 0:
+ return raw
+ if prepend:
+ trans = trans[len(filler):]
+ if trans == "":
+ return raw
+ else:
+ return trans
+
+def untranslate(trans, prepend = 1):
+ filler = "a:b:c:"
+ if prepend == 1:
+ context = "%s%s" % (filler, trans)
+ else:
+ context = trans
+
+ (rc, raw) = selinux.selinux_trans_to_raw_context(context)
+ if rc != 0:
+ return trans
+ if prepend:
+ raw = raw[len(filler):]
+ if raw == "":
+ return trans
+ else:
+ return raw
+
+class semanageRecords:
+ transaction = False
+ handle = None
+ store = None
+ def __init__(self, store):
+ global handle
+ self.load = True
+ self.sh = self.get_handle(store)
+
+ rc, localstore = selinux.selinux_getpolicytype()
+ if store == "" or store == localstore:
+ self.mylog = logger()
+ else:
+ self.mylog = nulllogger()
+
+ def set_reload(self, load):
+ self.load = load
+
+ def get_handle(self, store):
+ global is_mls_enabled
+
+ if semanageRecords.handle:
+ return semanageRecords.handle
+
+ handle = semanage_handle_create()
+ if not handle:
+ raise ValueError(_("Could not create semanage handle"))
+
+ if not semanageRecords.transaction and store != "":
+ semanage_select_store(handle, store, SEMANAGE_CON_DIRECT);
+ semanageRecords.store = store
+
+ if not semanage_is_managed(handle):
+ semanage_handle_destroy(handle)
+ raise ValueError(_("SELinux policy is not managed or store cannot be accessed."))
+
+ rc = semanage_access_check(handle)
+ if rc < SEMANAGE_CAN_READ:
+ semanage_handle_destroy(handle)
+ raise ValueError(_("Cannot read policy store."))
+
+ rc = semanage_connect(handle)
+ if rc < 0:
+ semanage_handle_destroy(handle)
+ raise ValueError(_("Could not establish semanage connection"))
+
+ is_mls_enabled = semanage_mls_enabled(handle)
+ if is_mls_enabled < 0:
+ semanage_handle_destroy(handle)
+ raise ValueError(_("Could not test MLS enabled status"))
+
+ semanageRecords.handle = handle
+ return semanageRecords.handle
+
+ def deleteall(self):
+ raise ValueError(_("Not yet implemented"))
+
+ def start(self):
+ if semanageRecords.transaction:
+ raise ValueError(_("Semanage transaction already in progress"))
+ self.begin()
+ semanageRecords.transaction = True
+
+ def begin(self):
+ if semanageRecords.transaction:
+ return
+ rc = semanage_begin_transaction(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not start semanage transaction"))
+ def customized(self):
+ raise ValueError(_("Not yet implemented"))
+
+ def commit(self):
+ if semanageRecords.transaction:
+ return
+
+ semanage_set_reload(self.sh, self.load)
+ rc = semanage_commit(self.sh)
+ if rc < 0:
+ self.mylog.commit(0)
+ raise ValueError(_("Could not commit semanage transaction"))
+ self.mylog.commit(1)
+
+ def finish(self):
+ if not semanageRecords.transaction:
+ raise ValueError(_("Semanage transaction not in progress"))
+ semanageRecords.transaction = False
+ self.commit()
+
+class moduleRecords(semanageRecords):
+ def __init__(self, store):
+ semanageRecords.__init__(self, store)
+
+ def get_all(self):
+ l = []
+ (rc, mlist, number) = semanage_module_list(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list SELinux modules"))
+
+ for i in range(number):
+ mod = semanage_module_list_nth(mlist, i)
+ l.append((semanage_module_get_name(mod), semanage_module_get_version(mod), semanage_module_get_enabled(mod)))
+ return l
+
+ def customized(self):
+ ALL = self.get_all()
+ if len(ALL) == 0:
+ return
+ return ["-d %s" % x[0] for x in [t for t in ALL if t[2] == 0]]
+
+ def list(self, heading = True, locallist = False):
+ ALL = self.get_all()
+ if len(ALL) == 0:
+ return
+
+ if heading:
+ print("\n%-25s%-10s\n" % (_("Modules Name"), _("Version")))
+ for t in ALL:
+ if t[2] == 0:
+ disabled = _("Disabled")
+ else:
+ if locallist:
+ continue
+ disabled = ""
+ print("%-25s%-10s%s" % (t[0], t[1], disabled))
+
+ def add(self, file):
+ if not os.path.exists(file):
+ raise ValueError(_("Module does not exists %s ") % file)
+ rc = semanage_module_install_file(self.sh, file);
+ if rc >= 0:
+ self.commit()
+
+ def disable(self, module):
+ need_commit = False
+ for m in module.split():
+ rc = semanage_module_disable(self.sh, m)
+ if rc < 0 and rc != -3:
+ raise ValueError(_("Could not disable module %s (remove failed)") % m)
+ if rc != -3:
+ need_commit = True
+ if need_commit:
+ self.commit()
+
+ def enable(self, module):
+ need_commit = False
+ for m in module.split():
+ rc = semanage_module_enable(self.sh, m)
+ if rc < 0 and rc != -3:
+ raise ValueError(_("Could not enable module %s (remove failed)") % m)
+ if rc != -3:
+ need_commit = True
+ if need_commit:
+ self.commit()
+
+ def modify(self, file):
+ rc = semanage_module_upgrade_file(self.sh, file);
+ if rc >= 0:
+ self.commit()
+
+ def delete(self, module):
+ for m in module.split():
+ rc = semanage_module_remove(self.sh, m)
+ if rc < 0 and rc != -2:
+ raise ValueError(_("Could not remove module %s (remove failed)") % m)
+
+ self.commit()
+
+ def deleteall(self):
+ l = [x[0] for x in [t for t in self.get_all() if t[2] == 0]]
+ for m in l:
+ self.enable(m)
+
+class dontauditClass(semanageRecords):
+ def __init__(self, store):
+ semanageRecords.__init__(self, store)
+
+ def toggle(self, dontaudit):
+ if dontaudit not in [ "on", "off" ]:
+ raise ValueError(_("dontaudit requires either 'on' or 'off'"))
+ self.begin()
+ semanage_set_disable_dontaudit(self.sh, dontaudit == "off")
+ self.commit()
+
+class permissiveRecords(semanageRecords):
+ def __init__(self, store):
+ semanageRecords.__init__(self, store)
+
+ def get_all(self):
+ l = []
+ (rc, mlist, number) = semanage_module_list(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list SELinux modules"))
+
+ for i in range(number):
+ mod = semanage_module_list_nth(mlist, i)
+ name = semanage_module_get_name(mod)
+ if name and name.startswith("permissive_"):
+ l.append(name.split("permissive_")[1])
+ return l
+
+ def list(self, heading = True, locallist = False):
+ ALL = [y["name"] for y in [x for x in sepolicy.info(sepolicy.TYPE) if x["permissive"]]]
+ if len(ALL) == 0:
+ return
+
+ customized = self.get_all()
+ if heading:
+ print("\n%-25s\n" % (_("Customized Permissive Types")))
+ for t in customized:
+ print(t)
+
+ if locallist:
+ return
+
+ if heading:
+ print("\n%-25s\n" % (_("Builtin Permissive Types")))
+
+ for t in ALL:
+ if t not in customized:
+ print(t)
+
+ def add(self, setype):
+ import glob
+ if setype not in sepolicy.get_all_domains():
+ raise ValueError(_("%s is not a domain type") % setype )
+
+ try:
+ import sepolgen.module as module
+ except ImportError:
+ raise ValueError(_("The sepolgen python module is required to setup permissive domains.\nIn some distributions it is included in the policycoreutils-devel patckage.\n# yum install policycoreutils-devel\nOr similar for your distro."))
+
+ name = "permissive_%s" % setype
+ dirname = "/var/lib/selinux"
+ os.chdir(dirname)
+ filename = "%s.te" % name
+ modtxt = """
+module %s 1.0;
+
+require {
+ type %s;
+}
+
+permissive %s;
+""" % (name, setype, setype)
+ fd = open(filename, 'w')
+ fd.write(modtxt)
+ fd.close()
+ mc = module.ModuleCompiler()
+ mc.create_module_package(filename, 1)
+ fd = open("permissive_%s.pp" % setype)
+ data = fd.read()
+ fd.close()
+
+ rc = semanage_module_install(self.sh, data, len(data));
+ if rc >= 0:
+ self.commit()
+
+ for root, dirs, files in os.walk("tmp", topdown = False):
+ for name in files:
+ os.remove(os.path.join(root, name))
+ for name in dirs:
+ os.rmdir(os.path.join(root, name))
+ os.removedirs("tmp")
+ for i in glob.glob("permissive_%s.*" % setype):
+ os.remove(i)
+ if rc < 0:
+ raise ValueError(_("Could not set permissive domain %s (module installation failed)") % name)
+
+ def delete(self, name):
+ for n in name.split():
+ rc = semanage_module_remove(self.sh, "permissive_%s" % n)
+ if rc < 0:
+ raise ValueError(_("Could not remove permissive domain %s (remove failed)") % name)
+
+ self.commit()
+
+ def deleteall(self):
+ l = self.get_all()
+ if len(l) > 0:
+ self.delete(" ".join(l))
+
+class loginRecords(semanageRecords):
+ def __init__(self, store = ""):
+ semanageRecords.__init__(self, store)
+ self.oldsename = None
+ self.oldserange = None
+ self.sename = None
+ self.serange = None
+
+ def __add(self, name, sename, serange):
+ rec, self.oldsename, self.oldserange = selinux.getseuserbyname(name)
+ if sename == "":
+ sename = "user_u"
+
+ userrec = seluserRecords()
+ (rc, oldserole) = userrec.get(self.oldsename)[1]
+ RANGE, (rc, serole) = userrec.get(sename)
+
+ if is_mls_enabled == 1:
+ if serange:
+ serange = untranslate(serange)
+ else:
+ serange = RANGE
+
+ (rc, k) = semanage_seuser_key_create(self.sh, name)
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % name)
+
+ (rc, exists) = semanage_seuser_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if login mapping for %s is defined") % name)
+ if exists:
+ semanage_seuser_key_free(k)
+ return self.__modify(name, sename, serange)
+
+ if name[0] == '%':
+ try:
+ grp.getgrnam(name[1:])
+ except:
+ raise ValueError(_("Linux Group %s does not exist") % name[1:])
+ else:
+ try:
+ pwd.getpwnam(name)
+ except:
+ raise ValueError(_("Linux User %s does not exist") % name)
+
+ (rc, u) = semanage_seuser_create(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not create login mapping for %s") % name)
+
+ rc = semanage_seuser_set_name(self.sh, u, name)
+ if rc < 0:
+ raise ValueError(_("Could not set name for %s") % name)
+
+ if serange:
+ rc = semanage_seuser_set_mlsrange(self.sh, u, serange)
+ if rc < 0:
+ raise ValueError(_("Could not set MLS range for %s") % name)
+
+ rc = semanage_seuser_set_sename(self.sh, u, sename)
+ if rc < 0:
+ raise ValueError(_("Could not set SELinux user for %s") % name)
+
+ rc = semanage_seuser_modify_local(self.sh, k, u)
+ if rc < 0:
+ raise ValueError(_("Could not add login mapping for %s") % name)
+
+ semanage_seuser_key_free(k)
+ semanage_seuser_free(u)
+ self.mylog.log("login", name, sename=sename, serange=serange, serole=",".join(serole), oldserole=",".join(oldserole), oldsename=self.oldsename, oldserange=self.oldserange);
+
+ def add(self, name, sename, serange):
+ try:
+ self.begin()
+ self.__add(name, sename, serange)
+ self.commit()
+ except ValueError as error:
+ self.mylog.commit(0)
+ raise error
+
+ def __modify(self, name, sename = "", serange=None):
+ rec, self.oldsename, self.oldserange = selinux.getseuserbyname(name)
+ if sename == "" and not serange:
+ raise ValueError(_("Requires seuser or serange"))
+
+ userrec = seluserRecords()
+ RANGE, (rc, oldserole) = userrec.get(self.oldsename)
+
+ if sename != "":
+ RANGE, (rc, serole) = userrec.get(sename)
+ else:
+ serole=oldserole
+
+ if serange:
+ self.serange=serange
+ else:
+ self.serange=RANGE
+
+ (rc, k) = semanage_seuser_key_create(self.sh, name)
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % name)
+
+ (rc, exists) = semanage_seuser_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if login mapping for %s is defined") % name)
+ if not exists:
+ raise ValueError(_("Login mapping for %s is not defined") % name)
+
+ (rc, u) = semanage_seuser_query(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not query seuser for %s") % name)
+
+ self.oldserange = semanage_seuser_get_mlsrange(u)
+ self.oldsename = semanage_seuser_get_sename(u)
+ if serange:
+ semanage_seuser_set_mlsrange(self.sh, u, untranslate(serange))
+
+ if sename != "":
+ semanage_seuser_set_sename(self.sh, u, sename)
+ else:
+ self.sename = self.oldsename
+
+ rc = semanage_seuser_modify_local(self.sh, k, u)
+ if rc < 0:
+ raise ValueError(_("Could not modify login mapping for %s") % name)
+
+ semanage_seuser_key_free(k)
+ semanage_seuser_free(u)
+ self.mylog.log("login", name,sename=self.sename,serange=self.serange, serole=",".join(serole), oldserole=",".join(oldserole), oldsename=self.oldsename, oldserange=self.oldserange);
+
+ def modify(self, name, sename = "", serange = None):
+ try:
+ self.begin()
+ self.__modify(name, sename, serange)
+ self.commit()
+ except ValueError as error:
+ self.mylog.commit(0)
+ raise error
+
+ def __delete(self, name):
+ rec, self.oldsename, self.oldserange = selinux.getseuserbyname(name)
+ userrec = seluserRecords()
+ RANGE, (rc, oldserole) = userrec.get(self.oldsename)
+
+ (rc, k) = semanage_seuser_key_create(self.sh, name)
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % name)
+
+ (rc, exists) = semanage_seuser_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if login mapping for %s is defined") % name)
+ if not exists:
+ raise ValueError(_("Login mapping for %s is not defined") % name)
+
+ (rc, exists) = semanage_seuser_exists_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if login mapping for %s is defined") % name)
+ if not exists:
+ raise ValueError(_("Login mapping for %s is defined in policy, cannot be deleted") % name)
+
+ rc = semanage_seuser_del_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not delete login mapping for %s") % name)
+
+ semanage_seuser_key_free(k)
+
+ rec, self.sename, self.serange = selinux.getseuserbyname("__default__")
+ RANGE, (rc, serole) = userrec.get(self.sename)
+
+ self.mylog.log_remove("login", name, sename=self.sename, serange=self.serange, serole=",".join(serole), oldserole=",".join(oldserole), oldsename=self.oldsename, oldserange=self.oldserange);
+
+ def delete(self, name):
+ try:
+ self.begin()
+ self.__delete(name)
+ self.commit()
+
+ except ValueError as error:
+ self.mylog.commit(0)
+ raise error
+
+ def deleteall(self):
+ (rc, ulist) = semanage_seuser_list_local(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list login mappings"))
+
+ try:
+ self.begin()
+ for u in ulist:
+ self.__delete(semanage_seuser_get_name(u))
+ self.commit()
+ except ValueError as error:
+ self.mylog.commit(0)
+ raise error
+
+ def get_all_logins(self):
+ ddict = {}
+ self.logins_path = selinux.selinux_policy_root() + "/logins"
+ for path,dirs,files in os.walk(self.logins_path):
+ if path == self.logins_path:
+ for name in files:
+ try:
+ fd = open(path + "/" + name)
+ rec = fd.read().rstrip().split(":")
+ fd.close()
+ ddict[name] = (rec[1], rec[2], rec[0])
+ except IndexError:
+ pass
+ return ddict
+
+ def get_all(self, locallist = False):
+ ddict = {}
+ if locallist:
+ (rc, self.ulist) = semanage_seuser_list_local(self.sh)
+ else:
+ (rc, self.ulist) = semanage_seuser_list(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list login mappings"))
+
+ for u in self.ulist:
+ name = semanage_seuser_get_name(u)
+ ddict[name] = (semanage_seuser_get_sename(u), semanage_seuser_get_mlsrange(u), "*")
+ return ddict
+
+ def customized(self):
+ l = []
+ ddict = self.get_all(True)
+ keys = list(ddict.keys())
+ keys.sort()
+ for k in keys:
+ l.append("-a -s %s -r '%s' %s" % (ddict[k][0], ddict[k][1], k))
+ return l
+
+ def list(self,heading = True, locallist = False):
+ ddict = self.get_all(locallist)
+ ldict = self.get_all_logins()
+ lkeys = list(ldict.keys())
+ keys = list(ddict.keys())
+ if len(keys) == 0 and len(lkeys) == 0:
+ return
+ keys.sort()
+ lkeys.sort()
+
+ if is_mls_enabled == 1:
+ if heading:
+ print("\n%-20s %-20s %-20s %s\n" % (_("Login Name"), _("SELinux User"), _("MLS/MCS Range"), _("Service")))
+ for k in keys:
+ u = ddict[k]
+ print("%-20s %-20s %-20s %s" % (k, u[0], translate(u[1]), u[2]))
+ if len(lkeys):
+ print("\nLocal customization in %s" % self.logins_path)
+
+ for k in lkeys:
+ u = ldict[k]
+ print("%-20s %-20s %-20s %s" % (k, u[0], translate(u[1]), u[2]))
+ else:
+ if heading:
+ print("\n%-25s %-25s\n" % (_("Login Name"), _("SELinux User")))
+ for k in keys:
+ print("%-25s %-25s" % (k, ddict[k][0]))
+
+class seluserRecords(semanageRecords):
+ def __init__(self, store = ""):
+ semanageRecords.__init__(self, store)
+
+ def get(self, name):
+ (rc, k) = semanage_user_key_create(self.sh, name)
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % name)
+ (rc, exists) = semanage_user_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if SELinux user %s is defined") % name)
+ (rc, u) = semanage_user_query(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not query user for %s") % name)
+ serange = semanage_user_get_mlsrange(u)
+ serole = semanage_user_get_roles(self.sh,u)
+ semanage_user_key_free(k)
+ semanage_user_free(u)
+ return serange, serole
+
+ def __add(self, name, roles, selevel, serange, prefix):
+ if is_mls_enabled == 1:
+ if serange:
+ serange = untranslate(serange)
+ else:
+ serange = "s0"
+
+ if selevel == "":
+ selevel = "s0"
+ else:
+ selevel = untranslate(selevel)
+
+ if len(roles) < 1:
+ raise ValueError(_("You must add at least one role for %s") % name)
+
+ (rc, k) = semanage_user_key_create(self.sh, name)
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % name)
+
+ (rc, exists) = semanage_user_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if SELinux user %s is defined") % name)
+ if exists:
+ semanage_user_key_free(k)
+ return self.__modify(name, roles, selevel, serange, prefix)
+
+ (rc, u) = semanage_user_create(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not create SELinux user for %s") % name)
+
+ rc = semanage_user_set_name(self.sh, u, name)
+ if rc < 0:
+ raise ValueError(_("Could not set name for %s") % name)
+
+ for r in roles:
+ rc = semanage_user_add_role(self.sh, u, r)
+ if rc < 0:
+ raise ValueError(_("Could not add role %(ROLE)s for %(NAME)s") % {"ROLE":r, "NAME":name})
+
+ if is_mls_enabled == 1:
+ rc = semanage_user_set_mlsrange(self.sh, u, serange)
+ if rc < 0:
+ raise ValueError(_("Could not set MLS range for %s") % name)
+
+ rc = semanage_user_set_mlslevel(self.sh, u, selevel)
+ if rc < 0:
+ raise ValueError(_("Could not set MLS level for %s") % name)
+ rc = semanage_user_set_prefix(self.sh, u, prefix)
+ if rc < 0:
+ raise ValueError(_("Could not add prefix %(ROLE)s for %(PREFIX)s") % {"ROLE":r, "PREFIX": prefix})
+ (rc, key) = semanage_user_key_extract(self.sh,u)
+ if rc < 0:
+ raise ValueError(_("Could not extract key for %s") % name)
+
+ rc = semanage_user_modify_local(self.sh, k, u)
+ if rc < 0:
+ raise ValueError(_("Could not add SELinux user %s") % name)
+
+ semanage_user_key_free(k)
+ semanage_user_free(u)
+ self.mylog.log("seuser", sename=name, serole=",".join(roles), serange=serange)
+
+ def add(self, name, roles, selevel, serange, prefix):
+ try:
+ self.begin()
+ self.__add( name, roles, selevel, serange, prefix)
+ self.commit()
+ except ValueError as error:
+ self.mylog.commit(0)
+ raise error
+
+ def __modify(self, name, roles = [], selevel = "", serange = None, prefix = ""):
+ oldserole = ""
+ oldserange = ""
+ newroles = string.join(roles, ' ');
+ if prefix == "" and len(roles) == 0 and not serange and selevel == "":
+ if is_mls_enabled == 1:
+ raise ValueError(_("Requires prefix, roles, level or range"))
+ else:
+ raise ValueError(_("Requires prefix or roles"))
+
+ (rc, k) = semanage_user_key_create(self.sh, name)
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % name)
+
+ (rc, exists) = semanage_user_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if SELinux user %s is defined") % name)
+ if not exists:
+ raise ValueError(_("SELinux user %s is not defined") % name)
+
+ (rc, u) = semanage_user_query(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not query user for %s") % name)
+
+ oldserange = semanage_user_get_mlsrange(u)
+ (rc, rlist) = semanage_user_get_roles(self.sh, u)
+ if rc >= 0:
+ oldserole = string.join(rlist, ' ');
+
+ if serange:
+ semanage_user_set_mlsrange(self.sh, u, untranslate(serange))
+ if selevel != "":
+ semanage_user_set_mlslevel(self.sh, u, untranslate(selevel))
+
+ if prefix != "":
+ semanage_user_set_prefix(self.sh, u, prefix)
+
+ if len(roles) != 0:
+ for r in rlist:
+ if r not in roles:
+ semanage_user_del_role(u, r)
+ for r in roles:
+ if r not in rlist:
+ semanage_user_add_role(self.sh, u, r)
+
+ rc = semanage_user_modify_local(self.sh, k, u)
+ if rc < 0:
+ raise ValueError(_("Could not modify SELinux user %s") % name)
+
+ semanage_user_key_free(k)
+ semanage_user_free(u)
+
+ role=",".join(newroles.split())
+ oldserole=",".join(oldserole.split())
+ self.mylog.log("seuser", sename=name, oldsename=name, serole=role, serange=serange, oldserole=oldserole, oldserange=oldserange)
+
+
+ def modify(self, name, roles = [], selevel = "", serange = None, prefix = ""):
+ try:
+ self.begin()
+ self.__modify(name, roles, selevel, serange, prefix)
+ self.commit()
+ except ValueError as error:
+ self.mylog.commit(0)
+ raise error
+
+ def __delete(self, name):
+ (rc, k) = semanage_user_key_create(self.sh, name)
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % name)
+
+ (rc, exists) = semanage_user_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if SELinux user %s is defined") % name)
+ if not exists:
+ raise ValueError(_("SELinux user %s is not defined") % name)
+
+ (rc, exists) = semanage_user_exists_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if SELinux user %s is defined") % name)
+ if not exists:
+ raise ValueError(_("SELinux user %s is defined in policy, cannot be deleted") % name)
+
+ (rc, u) = semanage_user_query(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not query user for %s") % name)
+ oldserange = semanage_user_get_mlsrange(u)
+ (rc, rlist) = semanage_user_get_roles(self.sh, u)
+ oldserole = ",".join(rlist)
+
+ rc = semanage_user_del_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not delete SELinux user %s") % name)
+
+ semanage_user_key_free(k)
+ semanage_user_free(u)
+
+ self.mylog.log_remove("seuser", oldsename=name, oldserange=oldserange, oldserole=oldserole)
+
+ def delete(self, name):
+ try:
+ self.begin()
+ self.__delete(name)
+ self.commit()
+
+ except ValueError as error:
+ self.mylog.commit(0)
+ raise error
+
+ def deleteall(self):
+ (rc, ulist) = semanage_user_list_local(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list login mappings"))
+
+ try:
+ self.begin()
+ for u in ulist:
+ self.__delete(semanage_user_get_name(u))
+ self.commit()
+ except ValueError as error:
+ self.mylog.commit(0)
+ raise error
+
+ def get_all(self, locallist = False):
+ ddict = {}
+ if locallist:
+ (rc, self.ulist) = semanage_user_list_local(self.sh)
+ else:
+ (rc, self.ulist) = semanage_user_list(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list SELinux users"))
+
+ for u in self.ulist:
+ name = semanage_user_get_name(u)
+ (rc, rlist) = semanage_user_get_roles(self.sh, u)
+ if rc < 0:
+ raise ValueError(_("Could not list roles for user %s") % name)
+
+ roles = string.join(rlist, ' ');
+ ddict[semanage_user_get_name(u)] = (semanage_user_get_prefix(u), semanage_user_get_mlslevel(u), semanage_user_get_mlsrange(u), roles)
+
+ return ddict
+
+ def customized(self):
+ l = []
+ ddict = self.get_all(True)
+ keys = list(ddict.keys())
+ keys.sort()
+ for k in keys:
+ l.append("-a -L %s -r %s -R '%s' %s" % (ddict[k][1], ddict[k][2], ddict[k][3], k))
+ return l
+
+ def list(self, heading = True, locallist = False):
+ ddict = self.get_all(locallist)
+ keys = list(ddict.keys())
+ if len(keys) == 0:
+ return
+ keys.sort()
+
+ if is_mls_enabled == 1:
+ if heading:
+ print("\n%-15s %-10s %-10s %-30s" % ("", _("Labeling"), _("MLS/"), _("MLS/")))
+ print("%-15s %-10s %-10s %-30s %s\n" % (_("SELinux User"), _("Prefix"), _("MCS Level"), _("MCS Range"), _("SELinux Roles")))
+ for k in keys:
+ print("%-15s %-10s %-10s %-30s %s" % (k, ddict[k][0], translate(ddict[k][1]), translate(ddict[k][2]), ddict[k][3]))
+ else:
+ if heading:
+ print("%-15s %s\n" % (_("SELinux User"), _("SELinux Roles")))
+ for k in keys:
+ print("%-15s %s" % (k, ddict[k][3]))
+
+class portRecords(semanageRecords):
+ try:
+ valid_types = sepolicy.info(sepolicy.ATTRIBUTE,"port_type")[0]["types"]
+ except RuntimeError:
+ valid_types = []
+
+ def __init__(self, store = ""):
+ semanageRecords.__init__(self, store)
+
+ def __genkey(self, port, proto):
+ if proto == "tcp":
+ proto_d = SEMANAGE_PROTO_TCP
+ else:
+ if proto == "udp":
+ proto_d = SEMANAGE_PROTO_UDP
+ else:
+ raise ValueError(_("Protocol udp or tcp is required"))
+ if port == "":
+ raise ValueError(_("Port is required"))
+
+ ports = port.split("-")
+ if len(ports) == 1:
+ high = low = int(ports[0])
+ else:
+ low = int(ports[0])
+ high = int(ports[1])
+
+ if high > 65535:
+ raise ValueError(_("Invalid Port"))
+
+ (rc, k) = semanage_port_key_create(self.sh, low, high, proto_d)
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %(PROTOTYPE)s/%(PORT)s") % {"PROTOTYPE": proto, "PORT":port})
+ return ( k, proto_d, low, high )
+
+ def __add(self, port, proto, serange, type):
+ if is_mls_enabled == 1:
+ if serange:
+ serange = untranslate(serange)
+ else:
+ serange = "s0"
+
+ if type == "":
+ raise ValueError(_("Type is required"))
+
+ if type not in self.valid_types:
+ raise ValueError(_("Type %s is invalid, must be a port type") % type)
+
+ ( k, proto_d, low, high ) = self.__genkey(port, proto)
+ if semanageRecords.transaction:
+ (rc, exists) = semanage_port_exists_local(self.sh, k)
+ else:
+ (rc, exists) = semanage_port_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if port %(PROTOCOL)s/%(PORT)s is defined") % {"PROTOCOL": proto, "PORT": port})
+ if exists:
+ raise ValueError(_("Port %(PROTOCOL)s/%(PORT)s already defined") % {"PROTOCOL": proto, "PORT": port})
+
+ (rc, p) = semanage_port_create(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not create port for %(PROTOCOL)s/%(PORT)s") % {"PROTOCOL": proto, "PORT": port})
+
+ semanage_port_set_proto(p, proto_d)
+ semanage_port_set_range(p, low, high)
+ (rc, con) = semanage_context_create(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not create context for %(PROTOCOL)s/%(PORT)s") % {"PROTOCOL": proto, "PORT": port})
+
+ rc = semanage_context_set_user(self.sh, con, "system_u")
+ if rc < 0:
+ raise ValueError(_("Could not set user in port context for %(PROTOCOL)s/%(PORT)s") % {"PROTOCOL": proto, "PORT": port})
+
+ rc = semanage_context_set_role(self.sh, con, "object_r")
+ if rc < 0:
+ raise ValueError(_("Could not set role in port context for %(PROTOCOL)s/%(PORT)s") % {"PROTOCOL": proto, "PORT": port})
+
+ rc = semanage_context_set_type(self.sh, con, type)
+ if rc < 0:
+ raise ValueError(_("Could not set type in port context for %(PROTOCOL)s/%(PORT)s") % {"PROTOCOL": proto, "PORT": port})
+
+ if serange:
+ rc = semanage_context_set_mls(self.sh, con, serange)
+ if rc < 0:
+ raise ValueError(_("Could not set mls fields in port context for %(PROTOCOL)s/%(PORT)s") % {"PROTOCOL": proto, "PORT": port})
+
+ rc = semanage_port_set_con(self.sh, p, con)
+ if rc < 0:
+ raise ValueError(_("Could not set port context for %(PROTOCOL)s/%(PORT)s") % {"PROTOCOL": proto, "PORT": port})
+
+ rc = semanage_port_modify_local(self.sh, k, p)
+ if rc < 0:
+ raise ValueError(_("Could not add port %(PROTOCOL)s/%(PORT)s") % {"PROTOCOL": proto, "PORT": port})
+
+ semanage_context_free(con)
+ semanage_port_key_free(k)
+ semanage_port_free(p)
+
+ def add(self, port, proto, serange, type):
+ self.begin()
+ self.__add(port, proto, serange, type)
+ self.commit()
+
+ def __modify(self, port, proto, serange, setype):
+ if not serange and setype == "":
+ if is_mls_enabled == 1:
+ raise ValueError(_("Requires setype or serange"))
+ else:
+ raise ValueError(_("Requires setype"))
+
+ if setype and setype not in self.valid_types:
+ raise ValueError(_("Type %s is invalid, must be a port type") % setype)
+
+ ( k, proto_d, low, high ) = self.__genkey(port, proto)
+
+ (rc, exists) = semanage_port_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if port @%(PROTOCOL)s/%(PORT)s is defined") % {"PROTOCOL": proto, "PORT": port})
+ if not exists:
+ raise ValueError(_("Port @%(PROTOCOL)s/%(PORT)s is not defined") % {"PROTOCOL": proto, "PORT": port})
+
+ (rc, p) = semanage_port_query(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not query port %(PROTOCOL)s/%(PORT)s") % {"PROTOCOL": proto, "PORT": port})
+
+ con = semanage_port_get_con(p)
+
+ if serange:
+ semanage_context_set_mls(self.sh, con, untranslate(serange))
+ if setype != "":
+ semanage_context_set_type(self.sh, con, setype)
+
+ rc = semanage_port_modify_local(self.sh, k, p)
+ if rc < 0:
+ raise ValueError(_("Could not modify port %(PROTOCOL)s/%(PORT)s") % {"PROTOCOL": proto, "PORT": port})
+
+ semanage_port_key_free(k)
+ semanage_port_free(p)
+
+ def modify(self, port, proto, serange, setype):
+ self.begin()
+ self.__modify(port, proto, serange, setype)
+ self.commit()
+
+ def deleteall(self):
+ (rc, plist) = semanage_port_list_local(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list the ports"))
+
+ self.begin()
+
+ for port in plist:
+ proto = semanage_port_get_proto(port)
+ proto_str = semanage_port_get_proto_str(proto)
+ low = semanage_port_get_low(port)
+ high = semanage_port_get_high(port)
+ port_str = "%s-%s" % (low, high)
+ ( k, proto_d, low, high ) = self.__genkey(port_str , proto_str)
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % port_str)
+
+ rc = semanage_port_del_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not delete the port %s") % port_str)
+ semanage_port_key_free(k)
+
+ self.commit()
+
+ def __delete(self, port, proto):
+ ( k, proto_d, low, high ) = self.__genkey(port, proto)
+ (rc, exists) = semanage_port_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if port %(PROTOCOL)s/%(PORT)s is defined") % {"PROTOCOL": proto, "PORT": port})
+ if not exists:
+ raise ValueError(_("Port %(PROTOCOL)s/%(PORT)s is not defined") % {"PROTOCOL": proto, "PORT": port})
+
+ (rc, exists) = semanage_port_exists_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if port %(PROTOCOL)s/%(PORT)s is defined") % {"PROTOCOL": proto, "PORT": port})
+ if not exists:
+ raise ValueError(_("Port %(PROTOCOL)s/%(PORT)s is defined in policy, cannot be deleted") % {"PROTOCOL": proto, "PORT": port})
+
+ rc = semanage_port_del_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not delete port %(PROTOCOL)s/%(PORT)s") % {"PROTOCOL": proto, "PORT": port})
+
+ semanage_port_key_free(k)
+
+ def delete(self, port, proto):
+ self.begin()
+ self.__delete(port, proto)
+ self.commit()
+
+ def get_all(self, locallist = False):
+ ddict = {}
+ if locallist:
+ (rc, self.plist) = semanage_port_list_local(self.sh)
+ else:
+ (rc, self.plist) = semanage_port_list(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list ports"))
+
+ for port in self.plist:
+ con = semanage_port_get_con(port)
+ ctype = semanage_context_get_type(con)
+ if ctype == "reserved_port_t":
+ continue
+ level = semanage_context_get_mls(con)
+ proto = semanage_port_get_proto(port)
+ proto_str = semanage_port_get_proto_str(proto)
+ low = semanage_port_get_low(port)
+ high = semanage_port_get_high(port)
+ ddict[(low, high, proto_str)] = (ctype, level)
+ return ddict
+
+ def get_all_by_type(self, locallist = False):
+ ddict = {}
+ if locallist:
+ (rc, self.plist) = semanage_port_list_local(self.sh)
+ else:
+ (rc, self.plist) = semanage_port_list(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list ports"))
+
+ for port in self.plist:
+ con = semanage_port_get_con(port)
+ ctype = semanage_context_get_type(con)
+ if ctype == "reserved_port_t":
+ continue
+ proto = semanage_port_get_proto(port)
+ proto_str = semanage_port_get_proto_str(proto)
+ low = semanage_port_get_low(port)
+ high = semanage_port_get_high(port)
+ if (ctype, proto_str) not in list(ddict.keys()):
+ ddict[(ctype,proto_str)] = []
+ if low == high:
+ ddict[(ctype,proto_str)].append("%d" % low)
+ else:
+ ddict[(ctype,proto_str)].append("%d-%d" % (low, high))
+ return ddict
+
+ def customized(self):
+ l = []
+ ddict = self.get_all(True)
+ keys = list(ddict.keys())
+ keys.sort()
+ for k in keys:
+ if k[0] == k[1]:
+ l.append("-a -t %s -p %s %s" % (ddict[k][0], k[2], k[0]))
+ else:
+ l.append("-a -t %s -p %s %s-%s" % (ddict[k][0], k[2], k[0], k[1]))
+ return l
+
+ def list(self, heading = True, locallist = False):
+ ddict = self.get_all_by_type(locallist)
+ keys = list(ddict.keys())
+ if len(keys) == 0:
+ return
+ keys.sort()
+
+ if heading:
+ print("%-30s %-8s %s\n" % (_("SELinux Port Type"), _("Proto"), _("Port Number")))
+ for i in keys:
+ rec = "%-30s %-8s " % i
+ rec += "%s" % ddict[i][0]
+ for p in ddict[i][1:]:
+ rec += ", %s" % p
+ print(rec)
+
+class nodeRecords(semanageRecords):
+ try:
+ valid_types = sepolicy.info(sepolicy.ATTRIBUTE,"node_type")[0]["types"]
+ except RuntimeError:
+ valid_types = []
+
+ def __init__(self, store = ""):
+ semanageRecords.__init__(self,store)
+ self.protocol = ["ipv4", "ipv6"]
+
+ def validate(self, addr, mask, protocol):
+ newaddr=addr
+ newmask=mask
+ newprotocol=""
+
+ if addr == "":
+ raise ValueError(_("Node Address is required"))
+
+ # verify valid comination
+ if len(mask) == 0 or mask[0] == "/":
+ i = IP(addr + mask)
+ newaddr = i.strNormal(0)
+ newmask = str(i.netmask())
+ if newmask == "0.0.0.0" and i.version() == 6:
+ newmask = "::"
+
+ protocol = "ipv%d" % i.version()
+
+ try:
+ newprotocol = self.protocol.index(protocol)
+ except:
+ raise ValueError(_("Unknown or missing protocol"))
+
+ return newaddr, newmask, newprotocol
+
+ def __add(self, addr, mask, proto, serange, ctype):
+ addr, mask, proto = self.validate(addr, mask, proto)
+
+ if is_mls_enabled == 1:
+ if serange:
+ serange = untranslate(serange)
+ else:
+ serange = "s0"
+
+ if ctype == "":
+ raise ValueError(_("SELinux node type is required"))
+
+ if ctype not in self.valid_types:
+ raise ValueError(_("Type %s is invalid, must be a node type") % ctype)
+
+ (rc, k) = semanage_node_key_create(self.sh, addr, mask, proto)
+ if rc < 0:
+ raise ValueError(_("Could not create key for %s") % addr)
+ if rc < 0:
+ raise ValueError(_("Could not check if addr %s is defined") % addr)
+
+ (rc, exists) = semanage_node_exists(self.sh, k)
+ if exists:
+ semanage_node_key_free(k)
+ return self.__modify(addr, mask, self.protocol[proto], serange, ctype)
+
+ (rc, node) = semanage_node_create(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not create addr for %s") % addr)
+ semanage_node_set_proto(node, proto)
+
+ rc = semanage_node_set_addr(self.sh, node, proto, addr)
+ (rc, con) = semanage_context_create(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not create context for %s") % addr)
+
+ rc = semanage_node_set_mask(self.sh, node, proto, mask)
+ if rc < 0:
+ raise ValueError(_("Could not set mask for %s") % addr)
+
+ rc = semanage_context_set_user(self.sh, con, "system_u")
+ if rc < 0:
+ raise ValueError(_("Could not set user in addr context for %s") % addr)
+
+ rc = semanage_context_set_role(self.sh, con, "object_r")
+ if rc < 0:
+ raise ValueError(_("Could not set role in addr context for %s") % addr)
+
+ rc = semanage_context_set_type(self.sh, con, ctype)
+ if rc < 0:
+ raise ValueError(_("Could not set type in addr context for %s") % addr)
+
+ if serange:
+ rc = semanage_context_set_mls(self.sh, con, serange)
+ if rc < 0:
+ raise ValueError(_("Could not set mls fields in addr context for %s") % addr)
+
+ rc = semanage_node_set_con(self.sh, node, con)
+ if rc < 0:
+ raise ValueError(_("Could not set addr context for %s") % addr)
+
+ rc = semanage_node_modify_local(self.sh, k, node)
+ if rc < 0:
+ raise ValueError(_("Could not add addr %s") % addr)
+
+ semanage_context_free(con)
+ semanage_node_key_free(k)
+ semanage_node_free(node)
+
+ def add(self, addr, mask, proto, serange, ctype):
+ self.begin()
+ self.__add(addr, mask, proto, serange, ctype)
+ self.commit()
+
+ def __modify(self, addr, mask, proto, serange, setype):
+ addr, mask, proto = self.validate(addr, mask, proto)
+
+ if not serange and setype == "":
+ raise ValueError(_("Requires setype or serange"))
+
+ if setype and setype not in self.valid_types:
+ raise ValueError(_("Type %s is invalid, must be a node type") % setype)
+
+ (rc, k) = semanage_node_key_create(self.sh, addr, mask, proto)
+ if rc < 0:
+ raise ValueError(_("Could not create key for %s") % addr)
+
+ (rc, exists) = semanage_node_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if addr %s is defined") % addr)
+ if not exists:
+ raise ValueError(_("Addr %s is not defined") % addr)
+
+ (rc, node) = semanage_node_query(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not query addr %s") % addr)
+
+ con = semanage_node_get_con(node)
+ if serange:
+ semanage_context_set_mls(self.sh, con, untranslate(serange))
+ if setype != "":
+ semanage_context_set_type(self.sh, con, setype)
+
+ rc = semanage_node_modify_local(self.sh, k, node)
+ if rc < 0:
+ raise ValueError(_("Could not modify addr %s") % addr)
+
+ semanage_node_key_free(k)
+ semanage_node_free(node)
+
+ def modify(self, addr, mask, proto, serange, setype):
+ self.begin()
+ self.__modify(addr, mask, proto, serange, setype)
+ self.commit()
+
+ def __delete(self, addr, mask, proto):
+
+ addr, mask, proto = self.validate(addr, mask, proto)
+
+ (rc, k) = semanage_node_key_create(self.sh, addr, mask, proto)
+ if rc < 0:
+ raise ValueError(_("Could not create key for %s") % addr)
+
+ (rc, exists) = semanage_node_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if addr %s is defined") % addr)
+ if not exists:
+ raise ValueError(_("Addr %s is not defined") % addr)
+
+ (rc, exists) = semanage_node_exists_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if addr %s is defined") % addr)
+ if not exists:
+ raise ValueError(_("Addr %s is defined in policy, cannot be deleted") % addr)
+
+ rc = semanage_node_del_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not delete addr %s") % addr)
+
+ semanage_node_key_free(k)
+
+ def delete(self, addr, mask, proto):
+ self.begin()
+ self.__delete(addr, mask, proto)
+ self.commit()
+
+ def deleteall(self):
+ (rc, nlist) = semanage_node_list_local(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not deleteall node mappings"))
+
+ self.begin()
+ for node in nlist:
+ self.__delete(semanage_node_get_addr(self.sh, node)[1], semanage_node_get_mask(self.sh, node)[1], self.protocol[semanage_node_get_proto(node)])
+ self.commit()
+
+ def get_all(self, locallist = False):
+ ddict = {}
+ if locallist :
+ (rc, self.ilist) = semanage_node_list_local(self.sh)
+ else:
+ (rc, self.ilist) = semanage_node_list(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list addrs"))
+
+ for node in self.ilist:
+ con = semanage_node_get_con(node)
+ addr = semanage_node_get_addr(self.sh, node)
+ mask = semanage_node_get_mask(self.sh, node)
+ proto = self.protocol[semanage_node_get_proto(node)]
+ ddict[(addr[1], mask[1], proto)] = (semanage_context_get_user(con), semanage_context_get_role(con), semanage_context_get_type(con), semanage_context_get_mls(con))
+
+ return ddict
+
+ def customized(self):
+ l = []
+ ddict = self.get_all(True)
+ keys = list(ddict.keys())
+ keys.sort()
+ for k in keys:
+ l.append("-a -M %s -p %s -t %s %s" % (k[1], k[2],ddict[k][2], k[0]))
+ return l
+
+ def list(self, heading = True, locallist = False):
+ ddict = self.get_all(locallist)
+ keys = list(ddict.keys())
+ if len(keys) == 0:
+ return
+ keys.sort()
+
+ if heading:
+ print("%-18s %-18s %-5s %-5s\n" % ("IP Address", "Netmask", "Protocol", "Context"))
+ if is_mls_enabled:
+ for k in keys:
+ val = ''
+ for fields in k:
+ val = val + '\t' + str(fields)
+ print("%-18s %-18s %-5s %s:%s:%s:%s " % (k[0],k[1],k[2],ddict[k][0], ddict[k][1],ddict[k][2], translate(ddict[k][3], False)))
+ else:
+ for k in keys:
+ print("%-18s %-18s %-5s %s:%s:%s " % (k[0],k[1],k[2],ddict[k][0], ddict[k][1],ddict[k][2]))
+
+
+class interfaceRecords(semanageRecords):
+ def __init__(self, store = ""):
+ semanageRecords.__init__(self, store)
+
+ def __add(self, interface, serange, ctype):
+ if is_mls_enabled == 1:
+ if serange:
+ serange = untranslate(serange)
+ else:
+ serange = "s0"
+
+ if ctype == "":
+ raise ValueError(_("SELinux Type is required"))
+
+ (rc, k) = semanage_iface_key_create(self.sh, interface)
+ if rc < 0:
+ raise ValueError(_("Could not create key for %s") % interface)
+
+ (rc, exists) = semanage_iface_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if interface %s is defined") % interface)
+ if exists:
+ semanage_iface_key_free(k)
+ return self.__modify(interface, serange, ctype)
+
+ (rc, iface) = semanage_iface_create(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not create interface for %s") % interface)
+
+ rc = semanage_iface_set_name(self.sh, iface, interface)
+ (rc, con) = semanage_context_create(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not create context for %s") % interface)
+
+ rc = semanage_context_set_user(self.sh, con, "system_u")
+ if rc < 0:
+ raise ValueError(_("Could not set user in interface context for %s") % interface)
+
+ rc = semanage_context_set_role(self.sh, con, "object_r")
+ if rc < 0:
+ raise ValueError(_("Could not set role in interface context for %s") % interface)
+
+ rc = semanage_context_set_type(self.sh, con, ctype)
+ if rc < 0:
+ raise ValueError(_("Could not set type in interface context for %s") % interface)
+
+ if serange:
+ rc = semanage_context_set_mls(self.sh, con, serange)
+ if rc < 0:
+ raise ValueError(_("Could not set mls fields in interface context for %s") % interface)
+
+ rc = semanage_iface_set_ifcon(self.sh, iface, con)
+ if rc < 0:
+ raise ValueError(_("Could not set interface context for %s") % interface)
+
+ rc = semanage_iface_set_msgcon(self.sh, iface, con)
+ if rc < 0:
+ raise ValueError(_("Could not set message context for %s") % interface)
+
+ rc = semanage_iface_modify_local(self.sh, k, iface)
+ if rc < 0:
+ raise ValueError(_("Could not add interface %s") % interface)
+
+ semanage_context_free(con)
+ semanage_iface_key_free(k)
+ semanage_iface_free(iface)
+
+ def add(self, interface, serange, ctype):
+ self.begin()
+ self.__add(interface, serange, ctype)
+ self.commit()
+
+ def __modify(self, interface, serange, setype):
+ if not serange and setype == "":
+ raise ValueError(_("Requires setype or serange"))
+
+ (rc, k) = semanage_iface_key_create(self.sh, interface)
+ if rc < 0:
+ raise ValueError(_("Could not create key for %s") % interface)
+
+ (rc, exists) = semanage_iface_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if interface %s is defined") % interface)
+ if not exists:
+ raise ValueError(_("Interface %s is not defined") % interface)
+
+ (rc, iface) = semanage_iface_query(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not query interface %s") % interface)
+
+ con = semanage_iface_get_ifcon(iface)
+
+ if serange:
+ semanage_context_set_mls(self.sh, con, untranslate(serange))
+ if setype != "":
+ semanage_context_set_type(self.sh, con, setype)
+
+ rc = semanage_iface_modify_local(self.sh, k, iface)
+ if rc < 0:
+ raise ValueError(_("Could not modify interface %s") % interface)
+
+ semanage_iface_key_free(k)
+ semanage_iface_free(iface)
+
+ def modify(self, interface, serange, setype):
+ self.begin()
+ self.__modify(interface, serange, setype)
+ self.commit()
+
+ def __delete(self, interface):
+ (rc, k) = semanage_iface_key_create(self.sh, interface)
+ if rc < 0:
+ raise ValueError(_("Could not create key for %s") % interface)
+
+ (rc, exists) = semanage_iface_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if interface %s is defined") % interface)
+ if not exists:
+ raise ValueError(_("Interface %s is not defined") % interface)
+
+ (rc, exists) = semanage_iface_exists_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if interface %s is defined") % interface)
+ if not exists:
+ raise ValueError(_("Interface %s is defined in policy, cannot be deleted") % interface)
+
+ rc = semanage_iface_del_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not delete interface %s") % interface)
+
+ semanage_iface_key_free(k)
+
+ def delete(self, interface):
+ self.begin()
+ self.__delete(interface)
+ self.commit()
+
+ def deleteall(self):
+ (rc, ulist) = semanage_iface_list_local(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not delete all interface mappings"))
+
+ self.begin()
+ for i in ulist:
+ self.__delete(semanage_iface_get_name(i))
+ self.commit()
+
+ def get_all(self, locallist = False):
+ ddict = {}
+ if locallist:
+ (rc, self.ilist) = semanage_iface_list_local(self.sh)
+ else:
+ (rc, self.ilist) = semanage_iface_list(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list interfaces"))
+
+ for interface in self.ilist:
+ con = semanage_iface_get_ifcon(interface)
+ ddict[semanage_iface_get_name(interface)] = (semanage_context_get_user(con), semanage_context_get_role(con), semanage_context_get_type(con), semanage_context_get_mls(con))
+
+ return ddict
+
+ def customized(self):
+ l = []
+ ddict = self.get_all(True)
+ keys = list(ddict.keys())
+ keys.sort()
+ for k in keys:
+ l.append("-a -t %s %s" % (ddict[k][2], k))
+ return l
+
+ def list(self, heading = True, locallist = False):
+ ddict = self.get_all(locallist)
+ keys = list(ddict.keys())
+ if len(keys) == 0:
+ return
+ keys.sort()
+
+ if heading:
+ print("%-30s %s\n" % (_("SELinux Interface"), _("Context")))
+ if is_mls_enabled:
+ for k in keys:
+ print("%-30s %s:%s:%s:%s " % (k,ddict[k][0], ddict[k][1],ddict[k][2], translate(ddict[k][3], False)))
+ else:
+ for k in keys:
+ print("%-30s %s:%s:%s " % (k,ddict[k][0], ddict[k][1],ddict[k][2]))
+
+class fcontextRecords(semanageRecords):
+ try:
+ valid_types = sepolicy.info(sepolicy.ATTRIBUTE,"file_type")[0]["types"]
+ valid_types += sepolicy.info(sepolicy.ATTRIBUTE,"device_node")[0]["types"]
+ valid_types.append("<<none>>")
+ except RuntimeError:
+ valid_types = []
+
+ def __init__(self, store = ""):
+ semanageRecords.__init__(self, store)
+ self.equiv = {}
+ self.equiv_dist = {}
+ self.equal_ind = False
+ try:
+ fd = open(selinux.selinux_file_context_subs_path(), "r")
+ for i in fd.readlines():
+ i = i.strip()
+ if len(i) == 0:
+ continue
+ if i.startswith("#"):
+ continue
+ target, substitute = i.split()
+ self.equiv[target] = substitute
+ fd.close()
+ except IOError:
+ pass
+ try:
+ fd = open(selinux.selinux_file_context_subs_dist_path(), "r")
+ for i in fd.readlines():
+ i = i.strip()
+ if len(i) == 0:
+ continue
+ if i.startswith("#"):
+ continue
+ target, substitute = i.split()
+ self.equiv_dist[target] = substitute
+ fd.close()
+ except IOError:
+ pass
+
+ def commit(self):
+ if self.equal_ind:
+ subs_file = selinux.selinux_file_context_subs_path()
+ tmpfile = "%s.tmp" % subs_file
+ fd = open(tmpfile, "w")
+ for target in list(self.equiv.keys()):
+ fd.write("%s %s\n" % (target, self.equiv[target]))
+ fd.close()
+ try:
+ os.chmod(tmpfile, os.stat(subs_file)[stat.ST_MODE])
+ except:
+ pass
+ os.rename(tmpfile,subs_file)
+ self.equal_ind = False
+ semanageRecords.commit(self)
+
+ def add_equal(self, target, substitute):
+ self.begin()
+ if target != "/" and target[-1] == "/":
+ raise ValueError(_("Target %s is not valid. Target is not allowed to end with '/'") % target )
+
+ if substitute != "/" and substitute[-1] == "/":
+ raise ValueError(_("Substiture %s is not valid. Substitute is not allowed to end with '/'") % substitute )
+
+ if target in list(self.equiv.keys()):
+ raise ValueError(_("Equivalence class for %s already exists") % target)
+ self.validate(target)
+
+ for fdict in (self.equiv, self.equiv_dist):
+ for i in fdict:
+ if i.startswith(target + "/"):
+ raise ValueError(_("File spec %(TARGET)s conflicts with equivalency rule '%(SOURCE)s %(DEST)s'") % {"TARGET": target, "SOURCE": i, "DEST": fdict[i]})
+
+ self.equiv[target] = substitute
+ self.equal_ind = True
+ self.commit()
+
+ def modify_equal(self, target, substitute):
+ self.begin()
+ if target not in list(self.equiv.keys()):
+ raise ValueError(_("Equivalence class for %s does not exists") % target)
+ self.equiv[target] = substitute
+ self.equal_ind = True
+ self.commit()
+
+ def createcon(self, target, seuser = "system_u"):
+ (rc, con) = semanage_context_create(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not create context for %s") % target)
+ if seuser == "":
+ seuser = "system_u"
+
+ rc = semanage_context_set_user(self.sh, con, seuser)
+ if rc < 0:
+ raise ValueError(_("Could not set user in file context for %s") % target)
+
+ rc = semanage_context_set_role(self.sh, con, "object_r")
+ if rc < 0:
+ raise ValueError(_("Could not set role in file context for %s") % target)
+
+ if is_mls_enabled == 1:
+ rc = semanage_context_set_mls(self.sh, con, "s0")
+ if rc < 0:
+ raise ValueError(_("Could not set mls fields in file context for %s") % target)
+
+ return con
+
+ def validate(self, target):
+ if target == "" or target.find("\n") >= 0:
+ raise ValueError(_("Invalid file specification"))
+ if target.find(" ") != -1:
+ raise ValueError(_("File specification can not include spaces"))
+ for fdict in (self.equiv, self.equiv_dist):
+ for i in fdict:
+ if target.startswith(i+"/"):
+ t = re.sub(i, fdict[i], target)
+ raise ValueError(_("File spec %(TARGET)s conflicts with equivalency rule '%(SOURCE)s %(DEST)s'; Try adding '%(DEST1)s' instead") % {"TARGET":target, "SOURCE": i, "DEST":fdict[i], "DEST1": t})
+
+
+ def __add(self, target, type, ftype = "", serange = None, seuser = "system_u"):
+ self.validate(target)
+
+ if seuser == "":
+ seuser = "system_u"
+
+ if not serange:
+ serange = "s0"
+
+ if is_mls_enabled == 1:
+ serange = untranslate(serange)
+
+ if type == "":
+ raise ValueError(_("SELinux Type is required"))
+
+ if type not in self.valid_types:
+ raise ValueError(_("Type %s is invalid, must be a file or device type") % type)
+
+ (rc, k) = semanage_fcontext_key_create(self.sh, target, file_types[ftype])
+ if rc < 0:
+ raise ValueError(_("Could not create key for %s") % target)
+
+ (rc, exists) = semanage_fcontext_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if file context for %s is defined") % target)
+
+ if not exists:
+ (rc, exists) = semanage_fcontext_exists_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if file context for %s is defined") % target)
+
+ if exists:
+ semanage_fcontext_key_free(k)
+ return self.__modify(target, type, ftype, serange, seuser)
+
+ (rc, fcontext) = semanage_fcontext_create(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not create file context for %s") % target)
+
+ rc = semanage_fcontext_set_expr(self.sh, fcontext, target)
+ if type != "<<none>>":
+ con = self.createcon(target, seuser)
+
+ rc = semanage_context_set_type(self.sh, con, type)
+ if rc < 0:
+ raise ValueError(_("Could not set type in file context for %s") % target)
+
+ if serange:
+ rc = semanage_context_set_mls(self.sh, con, serange)
+ if rc < 0:
+ raise ValueError(_("Could not set mls fields in file context for %s") % target)
+ rc = semanage_fcontext_set_con(self.sh, fcontext, con)
+ if rc < 0:
+ raise ValueError(_("Could not set file context for %s") % target)
+
+ semanage_fcontext_set_type(fcontext, file_types[ftype])
+
+ rc = semanage_fcontext_modify_local(self.sh, k, fcontext)
+ if rc < 0:
+ raise ValueError(_("Could not add file context for %s") % target)
+
+ if type != "<<none>>":
+ semanage_context_free(con)
+ semanage_fcontext_key_free(k)
+ semanage_fcontext_free(fcontext)
+
+ def add(self, target, type, ftype = "", serange=None, seuser = "system_u"):
+ self.begin()
+ self.__add(target, type, ftype, serange, seuser)
+ self.commit()
+
+ def __modify(self, target, setype, ftype, serange, seuser):
+ if serange and setype == "" and seuser == "":
+ raise ValueError(_("Requires setype, serange or seuser"))
+ if setype and setype not in self.valid_types:
+ raise ValueError(_("Type %s is invalid, must be a port type") % setype)
+
+ self.validate(target)
+
+ (rc, k) = semanage_fcontext_key_create(self.sh, target, file_types[ftype])
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % target)
+
+ (rc, exists) = semanage_fcontext_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if file context for %s is defined") % target)
+ if not exists:
+ (rc, exists) = semanage_fcontext_exists_local(self.sh, k)
+ if not exists:
+ raise ValueError(_("File context for %s is not defined") % target)
+
+ (rc, fcontext) = semanage_fcontext_query_local(self.sh, k)
+ if rc < 0:
+ (rc, fcontext) = semanage_fcontext_query(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not query file context for %s") % target)
+
+ if setype != "<<none>>":
+ con = semanage_fcontext_get_con(fcontext)
+
+ if con == None:
+ con = self.createcon(target)
+
+ if serange:
+ semanage_context_set_mls(self.sh, con, untranslate(serange))
+ if seuser != "":
+ semanage_context_set_user(self.sh, con, seuser)
+
+ if setype != "":
+ semanage_context_set_type(self.sh, con, setype)
+
+ rc = semanage_fcontext_set_con(self.sh, fcontext, con)
+ if rc < 0:
+ raise ValueError(_("Could not set file context for %s") % target)
+ else:
+ rc = semanage_fcontext_set_con(self.sh, fcontext, None)
+ if rc < 0:
+ raise ValueError(_("Could not set file context for %s") % target)
+
+ rc = semanage_fcontext_modify_local(self.sh, k, fcontext)
+ if rc < 0:
+ raise ValueError(_("Could not modify file context for %s") % target)
+
+ semanage_fcontext_key_free(k)
+ semanage_fcontext_free(fcontext)
+
+ def modify(self, target, setype, ftype, serange, seuser):
+ self.begin()
+ self.__modify(target, setype, ftype, serange, seuser)
+ self.commit()
+
+ def deleteall(self):
+ (rc, flist) = semanage_fcontext_list_local(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list the file contexts"))
+
+ self.begin()
+
+ for fcontext in flist:
+ target = semanage_fcontext_get_expr(fcontext)
+ ftype = semanage_fcontext_get_type(fcontext)
+ ftype_str = semanage_fcontext_get_type_str(ftype)
+ (rc, k) = semanage_fcontext_key_create(self.sh, target, file_types[ftype_str])
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % target)
+
+ rc = semanage_fcontext_del_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not delete the file context %s") % target)
+ semanage_fcontext_key_free(k)
+
+ self.equiv = {}
+ self.equal_ind = True
+ self.commit()
+
+ def __delete(self, target, ftype):
+ if target in list(self.equiv.keys()):
+ self.equiv.pop(target)
+ self.equal_ind = True
+ return
+
+ (rc,k) = semanage_fcontext_key_create(self.sh, target, file_types[ftype])
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % target)
+
+ (rc, exists) = semanage_fcontext_exists_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if file context for %s is defined") % target)
+ if not exists:
+ (rc, exists) = semanage_fcontext_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if file context for %s is defined") % target)
+ if exists:
+ raise ValueError(_("File context for %s is defined in policy, cannot be deleted") % target)
+ else:
+ raise ValueError(_("File context for %s is not defined") % target)
+
+ rc = semanage_fcontext_del_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not delete file context for %s") % target)
+
+ semanage_fcontext_key_free(k)
+
+ def delete(self, target, ftype):
+ self.begin()
+ self.__delete( target, ftype)
+ self.commit()
+
+ def get_all(self, locallist = False):
+ if locallist:
+ (rc, self.flist) = semanage_fcontext_list_local(self.sh)
+ else:
+ (rc, self.flist) = semanage_fcontext_list(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list file contexts"))
+
+ (rc, fclocal) = semanage_fcontext_list_local(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list local file contexts"))
+
+ self.flist += fclocal
+
+ ddict = {}
+ for fcontext in self.flist:
+ expr = semanage_fcontext_get_expr(fcontext)
+ ftype = semanage_fcontext_get_type(fcontext)
+ ftype_str = semanage_fcontext_get_type_str(ftype)
+ con = semanage_fcontext_get_con(fcontext)
+ if con:
+ ddict[(expr, ftype_str)] = (semanage_context_get_user(con), semanage_context_get_role(con), semanage_context_get_type(con), semanage_context_get_mls(con))
+ else:
+ ddict[(expr, ftype_str)] = con
+
+ return ddict
+
+ def customized(self):
+ l = []
+ fcon_dict = self.get_all(True)
+ keys = list(fcon_dict.keys())
+ keys.sort()
+ for k in keys:
+ if fcon_dict[k]:
+ l.append("-a -f %s -t %s '%s'" % (file_type_str_to_option[k[1]], fcon_dict[k][2], k[0]))
+
+ if len(self.equiv):
+ for target in list(self.equiv.keys()):
+ l.append("-a -e %s %s" % (self.equiv[target], target))
+ return l
+
+ def list(self, heading = True, locallist = False ):
+ fcon_dict = self.get_all(locallist)
+ keys = list(fcon_dict.keys())
+ if len(keys) != 0:
+ keys.sort()
+ if heading:
+ print("%-50s %-18s %s\n" % (_("SELinux fcontext"), _("type"), _("Context")))
+ for k in keys:
+ if fcon_dict[k]:
+ if is_mls_enabled:
+ print("%-50s %-18s %s:%s:%s:%s " % (k[0], k[1], fcon_dict[k][0], fcon_dict[k][1], fcon_dict[k][2], translate(fcon_dict[k][3],False)))
+ else:
+ print("%-50s %-18s %s:%s:%s " % (k[0], k[1], fcon_dict[k][0], fcon_dict[k][1],fcon_dict[k][2]))
+ else:
+ print("%-50s %-18s <<None>>" % (k[0], k[1]))
+
+ if len(self.equiv_dist):
+ if not locallist:
+ if heading:
+ print(_("\nSELinux Distribution fcontext Equivalence \n"))
+ for target in list(self.equiv_dist.keys()):
+ print("%s = %s" % (target, self.equiv_dist[target]))
+ if len(self.equiv):
+ if heading:
+ print(_("\nSELinux Local fcontext Equivalence \n"))
+
+ for target in list(self.equiv.keys()):
+ print("%s = %s" % (target, self.equiv[target]))
+
+class booleanRecords(semanageRecords):
+ def __init__(self, store = ""):
+ semanageRecords.__init__(self, store)
+ self.dict = {}
+ self.dict["TRUE"] = 1
+ self.dict["FALSE"] = 0
+ self.dict["ON"] = 1
+ self.dict["OFF"] = 0
+ self.dict["1"] = 1
+ self.dict["0"] = 0
+
+ try:
+ rc, self.current_booleans = selinux.security_get_boolean_names()
+ rc, ptype = selinux.selinux_getpolicytype()
+ except:
+ self.current_booleans = []
+ ptype = None
+
+ if self.store == None or self.store == ptype:
+ self.modify_local = True
+ else:
+ self.modify_local = False
+
+ def __mod(self, name, value):
+ name = selinux.selinux_boolean_sub(name)
+
+ (rc, k) = semanage_bool_key_create(self.sh, name)
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % name)
+ (rc, exists) = semanage_bool_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if boolean %s is defined") % name)
+ if not exists:
+ raise ValueError(_("Boolean %s is not defined") % name)
+
+ (rc, b) = semanage_bool_query(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not query file context %s") % name)
+
+ if value.upper() in self.dict:
+ semanage_bool_set_value(b, self.dict[value.upper()])
+ else:
+ raise ValueError(_("You must specify one of the following values: %s") % ", ".join(list(self.dict.keys())) )
+
+ if self.modify_local and name in self.current_booleans:
+ rc = semanage_bool_set_active(self.sh, k, b)
+ if rc < 0:
+ raise ValueError(_("Could not set active value of boolean %s") % name)
+ rc = semanage_bool_modify_local(self.sh, k, b)
+ if rc < 0:
+ raise ValueError(_("Could not modify boolean %s") % name)
+ semanage_bool_key_free(k)
+ semanage_bool_free(b)
+
+ def modify(self, name, value = None, use_file = False):
+ self.begin()
+ if use_file:
+ fd = open(name)
+ for b in fd.read().split("\n"):
+ b = b.strip()
+ if len(b) == 0:
+ continue
+
+ try:
+ boolname, val = b.split("=")
+ except ValueError:
+ raise ValueError(_("Bad format %(BOOLNAME)s: Record %(VALUE)s" % { "BOOLNAME": name, "VALUE": b } ))
+ self.__mod(boolname.strip(), val.strip())
+ fd.close()
+ else:
+ self.__mod(name, value)
+
+ self.commit()
+
+ def __delete(self, name):
+ name = selinux.selinux_boolean_sub(name)
+
+ (rc, k) = semanage_bool_key_create(self.sh, name)
+ if rc < 0:
+ raise ValueError(_("Could not create a key for %s") % name)
+ (rc, exists) = semanage_bool_exists(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if boolean %s is defined") % name)
+ if not exists:
+ raise ValueError(_("Boolean %s is not defined") % name)
+
+ (rc, exists) = semanage_bool_exists_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not check if boolean %s is defined") % name)
+ if not exists:
+ raise ValueError(_("Boolean %s is defined in policy, cannot be deleted") % name)
+
+ rc = semanage_bool_del_local(self.sh, k)
+ if rc < 0:
+ raise ValueError(_("Could not delete boolean %s") % name)
+
+ semanage_bool_key_free(k)
+
+ def delete(self, name):
+ self.begin()
+ self.__delete(name)
+ self.commit()
+
+ def deleteall(self):
+ (rc, self.blist) = semanage_bool_list_local(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list booleans"))
+
+ self.begin()
+
+ for boolean in self.blist:
+ name = semanage_bool_get_name(boolean)
+ self.__delete(name)
+
+ self.commit()
+
+ def get_all(self, locallist = False):
+ ddict = {}
+ if locallist:
+ (rc, self.blist) = semanage_bool_list_local(self.sh)
+ else:
+ (rc, self.blist) = semanage_bool_list(self.sh)
+ if rc < 0:
+ raise ValueError(_("Could not list booleans"))
+
+ for boolean in self.blist:
+ value = []
+ name = semanage_bool_get_name(boolean)
+ value.append(semanage_bool_get_value(boolean))
+ if self.modify_local and boolean in self.current_booleans:
+ value.append(selinux.security_get_boolean_pending(name))
+ value.append(selinux.security_get_boolean_active(name))
+ else:
+ value.append(value[0])
+ value.append(value[0])
+ ddict[name] = value
+
+ return ddict
+
+ def get_desc(self, name):
+ name = selinux.selinux_boolean_sub(name)
+ return boolean_desc(name)
+
+ def get_category(self, name):
+ name = selinux.selinux_boolean_sub(name)
+ return boolean_category(name)
+
+ def customized(self):
+ l = []
+ ddict = self.get_all(True)
+ keys = list(ddict.keys())
+ keys.sort()
+ for k in keys:
+ if ddict[k]:
+ l.append("-m -%s %s" % (ddict[k][2], k))
+ return l
+
+ def list(self, heading = True, locallist = False, use_file = False):
+ on_off = (_("off"), _("on"))
+ if use_file:
+ ddict = self.get_all(locallist)
+ keys = list(ddict.keys())
+ for k in keys:
+ if ddict[k]:
+ print("%s=%s" % (k, ddict[k][2]))
+ return
+ ddict = self.get_all(locallist)
+ keys = list(ddict.keys())
+ if len(keys) == 0:
+ return
+
+ if heading:
+ print("%-30s %s %s %s\n" % (_("SELinux boolean"),_("State"), _("Default"), _("Description")))
+ for k in keys:
+ if ddict[k]:
+ print("%-30s (%-5s,%5s) %s" % (k, on_off[selinux.security_get_boolean_active(k)], on_off[ddict[k][2]], self.get_desc(k)))
--
1.8.4.2
--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 05/05] Verify type being passed into semanage permissive is a valid domain.
2013-11-13 15:43 ` [PATCH 05/05] Verify type being passed into semanage permissive is a valid domain Dan Walsh
@ 2013-11-13 15:45 ` Daniel J Walsh
0 siblings, 0 replies; 5+ messages in thread
From: Daniel J Walsh @ 2013-11-13 15:45 UTC (permalink / raw)
To: sds, eparis; +Cc: selinux, Dan Walsh
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Ignore patch 05/05. It includes stuff it should not.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iEYEARECAAYFAlKDnpkACgkQrlYvE4MpobPQvQCfX2z2T6lEoRrcjB7lxIDbgkn/
+NkAnRiAKAcBqOA1LCDsYlfc5PqlUVvb
=ggDD
-----END PGP SIGNATURE-----
--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 04/05] Add -P semodule option to man page
2013-11-13 15:43 ` [PATCH 04/05] Add -P semodule option to man page Dan Walsh
@ 2013-11-13 16:18 ` Stephen Smalley
0 siblings, 0 replies; 5+ messages in thread
From: Stephen Smalley @ 2013-11-13 16:18 UTC (permalink / raw)
To: Dan Walsh, eparis; +Cc: selinux
On 11/13/2013 10:43 AM, Dan Walsh wrote:
> ---
> policycoreutils/semodule/semodule.8 | 3 +++
> 1 file changed, 3 insertions(+)
patch 1 applied to #master and pushed as policycoreutils 2.2.3.
patches 2-4 applied to #next.
--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-11-13 16:18 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-11-13 15:43 [PATCH 03/05] selinux_current_policy_path will return none on a disabled SELinux system Dan Walsh
2013-11-13 15:43 ` [PATCH 04/05] Add -P semodule option to man page Dan Walsh
2013-11-13 16:18 ` Stephen Smalley
2013-11-13 15:43 ` [PATCH 05/05] Verify type being passed into semanage permissive is a valid domain Dan Walsh
2013-11-13 15:45 ` Daniel J Walsh
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.