From: Michael Opdenacker <michael.opdenacker@free-electrons.com> To: kaloz@openwrt.org, khc@pm.waw.pl, linux@arm.linux.org.uk Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Michael Opdenacker <michael.opdenacker@free-electrons.com> Subject: [PATCH][RESEND] ARM: IXP4xx: remove deprecated IRQF_DISABLED Date: Mon, 9 Dec 2013 05:52:24 +0100 [thread overview] Message-ID: <1386564744-19065-1-git-send-email-michael.opdenacker@free-electrons.com> (raw) In-Reply-To: <1381547864-4970-1-git-send-email-michael.opdenacker@free-electrons.com> This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> --- arch/arm/mach-ixp4xx/common.c | 2 +- arch/arm/mach-ixp4xx/dsmg600-setup.c | 3 +-- arch/arm/mach-ixp4xx/fsg-setup.c | 6 ++---- arch/arm/mach-ixp4xx/nas100d-setup.c | 3 +-- arch/arm/mach-ixp4xx/nslu2-setup.c | 6 ++---- 5 files changed, 7 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 9edaf4734fa8..340b2c9c51f4 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -312,7 +312,7 @@ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id) static struct irqaction ixp4xx_timer_irq = { .name = "timer1", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = ixp4xx_timer_interrupt, .dev_id = &clockevent_ixp4xx, }; diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 736dc692d540..43ee06d3abe5 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -233,8 +233,7 @@ static int __init dsmg600_gpio_init(void) gpio_request(DSMG600_RB_GPIO, "reset button"); if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "DSM-G600 reset button", NULL) < 0) { + IRQF_TRIGGER_LOW, "DSM-G600 reset button", NULL) < 0) { printk(KERN_DEBUG "Reset Button IRQ %d not available\n", gpio_to_irq(DSMG600_RB_GPIO)); diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 429966b756ed..5c4b0c4a1b37 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -208,16 +208,14 @@ static void __init fsg_init(void) platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices)); if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "FSG reset button", NULL) < 0) { + IRQF_TRIGGER_LOW, "FSG reset button", NULL) < 0) { printk(KERN_DEBUG "Reset Button IRQ %d not available\n", gpio_to_irq(FSG_RB_GPIO)); } if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "FSG power button", NULL) < 0) { + IRQF_TRIGGER_LOW, "FSG power button", NULL) < 0) { printk(KERN_DEBUG "Power Button IRQ %d not available\n", gpio_to_irq(FSG_SB_GPIO)); diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 507cb5233537..4e0f762bc651 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -295,8 +295,7 @@ static void __init nas100d_init(void) pm_power_off = nas100d_power_off; if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "NAS100D reset button", NULL) < 0) { + IRQF_TRIGGER_LOW, "NAS100D reset button", NULL) < 0) { printk(KERN_DEBUG "Reset Button IRQ %d not available\n", gpio_to_irq(NAS100D_RB_GPIO)); diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index ba5f1cda2a9d..88c025f52d8d 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -265,16 +265,14 @@ static void __init nslu2_init(void) pm_power_off = nslu2_power_off; if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "NSLU2 reset button", NULL) < 0) { + IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) { printk(KERN_DEBUG "Reset Button IRQ %d not available\n", gpio_to_irq(NSLU2_RB_GPIO)); } if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler, - IRQF_DISABLED | IRQF_TRIGGER_HIGH, - "NSLU2 power button", NULL) < 0) { + IRQF_TRIGGER_HIGH, "NSLU2 power button", NULL) < 0) { printk(KERN_DEBUG "Power Button IRQ %d not available\n", gpio_to_irq(NSLU2_PB_GPIO)); -- 1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: michael.opdenacker@free-electrons.com (Michael Opdenacker) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH][RESEND] ARM: IXP4xx: remove deprecated IRQF_DISABLED Date: Mon, 9 Dec 2013 05:52:24 +0100 [thread overview] Message-ID: <1386564744-19065-1-git-send-email-michael.opdenacker@free-electrons.com> (raw) In-Reply-To: <1381547864-4970-1-git-send-email-michael.opdenacker@free-electrons.com> This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> --- arch/arm/mach-ixp4xx/common.c | 2 +- arch/arm/mach-ixp4xx/dsmg600-setup.c | 3 +-- arch/arm/mach-ixp4xx/fsg-setup.c | 6 ++---- arch/arm/mach-ixp4xx/nas100d-setup.c | 3 +-- arch/arm/mach-ixp4xx/nslu2-setup.c | 6 ++---- 5 files changed, 7 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 9edaf4734fa8..340b2c9c51f4 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -312,7 +312,7 @@ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id) static struct irqaction ixp4xx_timer_irq = { .name = "timer1", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_TIMER | IRQF_IRQPOLL, .handler = ixp4xx_timer_interrupt, .dev_id = &clockevent_ixp4xx, }; diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 736dc692d540..43ee06d3abe5 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -233,8 +233,7 @@ static int __init dsmg600_gpio_init(void) gpio_request(DSMG600_RB_GPIO, "reset button"); if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "DSM-G600 reset button", NULL) < 0) { + IRQF_TRIGGER_LOW, "DSM-G600 reset button", NULL) < 0) { printk(KERN_DEBUG "Reset Button IRQ %d not available\n", gpio_to_irq(DSMG600_RB_GPIO)); diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 429966b756ed..5c4b0c4a1b37 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -208,16 +208,14 @@ static void __init fsg_init(void) platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices)); if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "FSG reset button", NULL) < 0) { + IRQF_TRIGGER_LOW, "FSG reset button", NULL) < 0) { printk(KERN_DEBUG "Reset Button IRQ %d not available\n", gpio_to_irq(FSG_RB_GPIO)); } if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "FSG power button", NULL) < 0) { + IRQF_TRIGGER_LOW, "FSG power button", NULL) < 0) { printk(KERN_DEBUG "Power Button IRQ %d not available\n", gpio_to_irq(FSG_SB_GPIO)); diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 507cb5233537..4e0f762bc651 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -295,8 +295,7 @@ static void __init nas100d_init(void) pm_power_off = nas100d_power_off; if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "NAS100D reset button", NULL) < 0) { + IRQF_TRIGGER_LOW, "NAS100D reset button", NULL) < 0) { printk(KERN_DEBUG "Reset Button IRQ %d not available\n", gpio_to_irq(NAS100D_RB_GPIO)); diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index ba5f1cda2a9d..88c025f52d8d 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -265,16 +265,14 @@ static void __init nslu2_init(void) pm_power_off = nslu2_power_off; if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler, - IRQF_DISABLED | IRQF_TRIGGER_LOW, - "NSLU2 reset button", NULL) < 0) { + IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) { printk(KERN_DEBUG "Reset Button IRQ %d not available\n", gpio_to_irq(NSLU2_RB_GPIO)); } if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler, - IRQF_DISABLED | IRQF_TRIGGER_HIGH, - "NSLU2 power button", NULL) < 0) { + IRQF_TRIGGER_HIGH, "NSLU2 power button", NULL) < 0) { printk(KERN_DEBUG "Power Button IRQ %d not available\n", gpio_to_irq(NSLU2_PB_GPIO)); -- 1.8.3.2
next prev parent reply other threads:[~2013-12-09 4:52 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-10-12 3:17 [PATCH] ARM: IXP4xx: remove deprecated IRQF_DISABLED Michael Opdenacker 2013-10-12 3:17 ` Michael Opdenacker 2013-12-09 4:52 ` Michael Opdenacker [this message] 2013-12-09 4:52 ` [PATCH][RESEND] " Michael Opdenacker
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1386564744-19065-1-git-send-email-michael.opdenacker@free-electrons.com \ --to=michael.opdenacker@free-electrons.com \ --cc=kaloz@openwrt.org \ --cc=khc@pm.waw.pl \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.