* [PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support
@ 2013-12-24 3:04 Fabio Estevam
2013-12-24 3:04 ` [PATCH v2 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 Fabio Estevam
2013-12-24 5:45 ` [PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Fabio Estevam @ 2013-12-24 3:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
mx6 sabresd boards have Freescale PFUZE100 regulator, so add support for it.
Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Fix the maximum voltage of sw2 regulator
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 110 +++++++++++++++++++++++++++++++++
1 file changed, 110 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 9dea121..ae04ec2 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -165,6 +165,112 @@
};
};
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic: pfuze100 at 08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -223,6 +329,10 @@
fsl,pins = <MX6QDL_I2C1_PINGRP2>;
};
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <MX6QDL_I2C2_PINGRP2>;
+ };
+
pinctrl_i2c3: i2c3grp {
fsl,pins = <MX6QDL_I2C3_PINGRP2>;
};
--
1.8.1.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v2 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100
2013-12-24 3:04 [PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Fabio Estevam
@ 2013-12-24 3:04 ` Fabio Estevam
2013-12-24 5:45 ` [PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2013-12-24 3:04 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
PFUZE100 regulator is commonly found on mx6 based designs.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- None
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 318c5fb..2c3245e 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -167,6 +167,7 @@ CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
+CONFIG_REGULATOR_PFUZE100=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
--
1.8.1.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support
2013-12-24 3:04 [PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Fabio Estevam
2013-12-24 3:04 ` [PATCH v2 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 Fabio Estevam
@ 2013-12-24 5:45 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2013-12-24 5:45 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Dec 24, 2013 at 01:04:49AM -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> mx6 sabresd boards have Freescale PFUZE100 regulator, so add support for it.
>
> Signed-off-by: Robin Gong <b38343@freescale.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Applied both, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-12-24 5:45 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-12-24 3:04 [PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Fabio Estevam
2013-12-24 3:04 ` [PATCH v2 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 Fabio Estevam
2013-12-24 5:45 ` [PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.