* [PATCH v2 0/4] input: Add new sun4i-lradc-keys driver @ 2014-01-02 9:58 ` Hans de Goede 0 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-01-02 9:58 UTC (permalink / raw) To: Dmitry Torokhov Cc: linux-input-u79uwXL29TY76Z2rM5mHXA, Maxime Ripard, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw Hi Dimitri et al, Here is v2 of the sun4i-lradc-keys driver, changes since v1: - Use include/dt-bindings/input/input.h - Rename the keycodes property to linux,chan0-keycodes Regards, Hans ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v2 0/4] input: Add new sun4i-lradc-keys driver @ 2014-01-02 9:58 ` Hans de Goede 0 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-01-02 9:58 UTC (permalink / raw) To: linux-arm-kernel Hi Dimitri et al, Here is v2 of the sun4i-lradc-keys driver, changes since v1: - Use include/dt-bindings/input/input.h - Rename the keycodes property to linux,chan0-keycodes Regards, Hans ^ permalink raw reply [flat|nested] 18+ messages in thread
[parent not found: <1388656707-16181-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* [PATCH v2 1/4] input: Add new sun4i-lradc-keys driver 2014-01-02 9:58 ` Hans de Goede @ 2014-01-02 9:58 ` Hans de Goede -1 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-01-02 9:58 UTC (permalink / raw) To: Dmitry Torokhov Cc: linux-input-u79uwXL29TY76Z2rM5mHXA, Maxime Ripard, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Hans de Goede Allwinnner sunxi SoCs have a low resolution adc (called lradc) which is specifically designed to have various (tablet) keys (ie home, back, search, etc). attached to it using a resistor network. This adds a driver for this. There are 2 channels, currently this driver only supports chan0 since there are no boards known to use chan1. The devicetree properties are already prefixed with chan0 as preparation for chan1 support in the future. This has been tested on an olimex a10s-olinuxino-micro, a13-olinuxino, and a20-olinuxino-micro. Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- .../devicetree/bindings/input/sun4i-lradc-keys.txt | 22 ++ drivers/input/keyboard/Kconfig | 10 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/sun4i-lradc-keys.c | 243 +++++++++++++++++++++ 4 files changed, 276 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt create mode 100644 drivers/input/keyboard/sun4i-lradc-keys.c diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt new file mode 100644 index 0000000..7801264 --- /dev/null +++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt @@ -0,0 +1,22 @@ +Allwinner sun4i low res adc attached tablet keys +------------------------------------------------ + +Required properties: + - compatible: "allwinner,sun4i-lradc-keys" + - reg: mmio address range of the chip + - interrupts: interrupt to which the chip is connected + - allwinner,chan0-step: step in mV between keys must be 150 or 200 + - linux,chan0-keycodes: array of dt-bindings/input/input.h KEY_ codes + +Example: + +#include <dt-bindings/input/input.h> + + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + allwinner,chan0-step = <200>; + linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN + KEY_MENU KEY_ENTER KEY_HOME>; + }; diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index bb174c1..d95e6e4 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -544,6 +544,16 @@ config KEYBOARD_STMPE To compile this driver as a module, choose M here: the module will be called stmpe-keypad. +config KEYBOARD_SUN4I_LRADC + tristate "Allwinner sun4i low res adc attached tablet keys support" + depends on ARCH_SUNXI + help + This selects support for the Allwinner low res adc attached tablet + keys found on Allwinner sunxi SoCs. + + To compile this driver as a module, choose M here: the + module will be called sun4i-lradc-keys. + config KEYBOARD_DAVINCI tristate "TI DaVinci Key Scan" depends on ARCH_DAVINCI_DM365 diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index a699b61..f3265bd 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o diff --git a/drivers/input/keyboard/sun4i-lradc-keys.c b/drivers/input/keyboard/sun4i-lradc-keys.c new file mode 100644 index 0000000..5c55e17 --- /dev/null +++ b/drivers/input/keyboard/sun4i-lradc-keys.c @@ -0,0 +1,243 @@ +/* + * Allwinner sun4i low res adc attached tablet keys driver + * + * Copyright (C) 2014 Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Allwinnner sunxi SoCs have a lradc which is specifically designed to have + * various (tablet) keys (ie home, back, search, etc). attached to it using + * a resistor network. This driver is for the keys on such boards. + * + * There are 2 channels, currently this driver only supports chan0 since there + * are no boards known to use chan1. The devicetree properties are already + * prefixed with chan0 as preparation for chan1 support in the future. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#define LRADC_CTRL 0x00 +#define LRADC_INTC 0x04 +#define LRADC_INTS 0x08 +#define LRADC_DATA0 0x0c +#define LRADC_DATA1 0x10 + +/* LRADC_CTRL bits */ +#define FIRST_CONVERT_DLY(x) ((x) << 24) /* 8 bits */ +#define CHAN_SELECT(x) ((x) << 22) /* 2 bits */ +#define CONTINUE_TIME_SEL(x) ((x) << 16) /* 4 bits */ +#define KEY_MODE_SEL(x) ((x) << 12) /* 2 bits */ +#define LEVELA_B_CNT(x) ((x) << 8) /* 4 bits */ +#define HOLD_EN(x) ((x) << 6) +#define LEVELB_VOL(x) ((x) << 4) /* 2 bits */ +#define SAMPLE_RATE(x) ((x) << 2) /* 2 bits */ +#define ENABLE(x) ((x) << 0) + +/* LRADC_INTC and LRADC_INTS bits */ +#define CHAN1_KEYUP_IRQ BIT(12) +#define CHAN1_ALRDY_HOLD_IRQ BIT(11) +#define CHAN1_HOLD_IRQ BIT(10) +#define CHAN1_KEYDOWN_IRQ BIT(9) +#define CHAN1_DATA_IRQ BIT(8) +#define CHAN0_KEYUP_IRQ BIT(4) +#define CHAN0_ALRDY_HOLD_IRQ BIT(3) +#define CHAN0_HOLD_IRQ BIT(2) +#define CHAN0_KEYDOWN_IRQ BIT(1) +#define CHAN0_DATA_IRQ BIT(0) + +#define MAX_KEYS 13 + +/* Lookup table to map the adc val to a keycode index for 150 mv step size */ +static const u8 adc_val_to_key_index_step150[64] = { + 0, 0, 0, + 1, 1, 1, 1, 1, + 2, 2, 2, 2, 2, + 3, 3, 3, 3, + 4, 4, 4, 4, 4, + 5, 5, 5, 5, 5, + 6, 6, 6, 6, 6, + 7, 7, 7, 7, + 8, 8, 8, 8, 8, + 9, 9, 9, 9, 9, + 10, 10, 10, 10, + 11, 11, 11, 11, + 12, 12, 12, 12, 12, 12, 12, 12, 12, 12 +}; + +/* Lookup table to map the adc val to a keycode index for 200 mv step size */ +static const u8 adc_val_to_key_index_step200[64] = { + 0, 0, 0, 0, 0, 0, 0, 0, + 1, 1, 1, 1, 1, 1, 1, + 2, 2, 2, 2, 2, 2, 2, + 3, 3, 3, 3, 3, 3, + 4, 4, 4, 4, 4, 4, + 5, 5, 5, 5, 5, 5, + 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 +}; + +struct sun4i_lradc_data { + struct device *dev; + struct input_dev *input; + void __iomem *base; + u32 chan0_step; + u32 chan0_keycode; + u32 chan0_keycodes[MAX_KEYS]; +}; + +static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id) +{ + struct sun4i_lradc_data *lradc = dev_id; + u32 ints, val; + + ints = readl(lradc->base + LRADC_INTS); + + /* + * lradc supports only one keypress at a time, release does not give + * any info as to which key was released, so we cache the keycode. + */ + if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) { + val = readl(lradc->base + LRADC_DATA0); + if (lradc->chan0_step == 150) + val = adc_val_to_key_index_step150[val]; + else + val = adc_val_to_key_index_step200[val]; + + lradc->chan0_keycode = lradc->chan0_keycodes[val]; + input_report_key(lradc->input, lradc->chan0_keycode, 1); + } + + if (ints & CHAN0_KEYUP_IRQ) { + input_report_key(lradc->input, lradc->chan0_keycode, 0); + lradc->chan0_keycode = 0; + } + + input_sync(lradc->input); + + writel(ints, lradc->base + LRADC_INTS); + + return IRQ_HANDLED; +} + +static int sun4i_lradc_open(struct input_dev *dev) +{ + struct sun4i_lradc_data *lradc = input_get_drvdata(dev); + + /* + * Set sample time to 16 ms / 62.5 Hz. Wait 2 * 16 ms for key to + * stabilize on press, wait (1 + 1) * 16 ms for key release + */ + writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | + SAMPLE_RATE(2) | ENABLE(1), lradc->base + LRADC_CTRL); + + writel(CHAN0_KEYUP_IRQ | CHAN0_KEYDOWN_IRQ, lradc->base + LRADC_INTC); + + return 0; +} + +static void sun4i_lradc_close(struct input_dev *dev) +{ + struct sun4i_lradc_data *lradc = input_get_drvdata(dev); + + /* Disable lradc, leave other settings unchanged */ + writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | + SAMPLE_RATE(2), lradc->base + LRADC_CTRL); + writel(0, lradc->base + LRADC_INTC); +} + +static int sun4i_lradc_probe(struct platform_device *pdev) +{ + struct sun4i_lradc_data *lradc; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + int i, ret; + + lradc = devm_kzalloc(dev, sizeof(struct sun4i_lradc_data), GFP_KERNEL); + if (!lradc) + return -ENOMEM; + + ret = of_property_read_u32(np, "allwinner,chan0-step", + &lradc->chan0_step); + if (ret || (lradc->chan0_step != 150 && lradc->chan0_step != 200)) { + dev_err(dev, "Invalid allwinner,chan0-step dt-property\n"); + return -EINVAL; + } + + for (i = 0; i < MAX_KEYS; i++) + of_property_read_u32_index(np, "linux,chan0-keycodes", + i, &lradc->chan0_keycodes[i]); + + lradc->dev = dev; + lradc->input = devm_input_allocate_device(dev); + if (!lradc->input) + return -ENOMEM; + + lradc->input->name = pdev->name; + lradc->input->phys = "sun4i_lradc/input0"; + lradc->input->open = sun4i_lradc_open; + lradc->input->close = sun4i_lradc_close; + lradc->input->id.bustype = BUS_HOST; + lradc->input->id.vendor = 0x0001; + lradc->input->id.product = 0x0001; + lradc->input->id.version = 0x0100; + lradc->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY); + for (i = 0; i < MAX_KEYS; i++) + set_bit(lradc->chan0_keycodes[i], lradc->input->keybit); + input_set_drvdata(lradc->input, lradc); + + lradc->base = devm_ioremap_resource(dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0)); + if (IS_ERR(lradc->base)) + return PTR_ERR(lradc->base); + + ret = devm_request_irq(dev, platform_get_irq(pdev, 0), sun4i_lradc_irq, + 0, "sun4i-lradc-keys", lradc); + if (ret) + return ret; + + ret = input_register_device(lradc->input); + if (ret) + return ret; + + platform_set_drvdata(pdev, lradc); + return 0; +} + +static const struct of_device_id sun4i_lradc_of_match[] = { + { .compatible = "allwinner,sun4i-lradc-keys", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match); + +static struct platform_driver sun4i_lradc_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "sun4i-lradc-keys", + .of_match_table = of_match_ptr(sun4i_lradc_of_match), + }, + .probe = sun4i_lradc_probe, +}; + +module_platform_driver(sun4i_lradc_driver); + +MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>"); +MODULE_LICENSE("GPL"); -- 1.8.4.2 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 1/4] input: Add new sun4i-lradc-keys driver @ 2014-01-02 9:58 ` Hans de Goede 0 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-01-02 9:58 UTC (permalink / raw) To: linux-arm-kernel Allwinnner sunxi SoCs have a low resolution adc (called lradc) which is specifically designed to have various (tablet) keys (ie home, back, search, etc). attached to it using a resistor network. This adds a driver for this. There are 2 channels, currently this driver only supports chan0 since there are no boards known to use chan1. The devicetree properties are already prefixed with chan0 as preparation for chan1 support in the future. This has been tested on an olimex a10s-olinuxino-micro, a13-olinuxino, and a20-olinuxino-micro. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- .../devicetree/bindings/input/sun4i-lradc-keys.txt | 22 ++ drivers/input/keyboard/Kconfig | 10 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/sun4i-lradc-keys.c | 243 +++++++++++++++++++++ 4 files changed, 276 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt create mode 100644 drivers/input/keyboard/sun4i-lradc-keys.c diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt new file mode 100644 index 0000000..7801264 --- /dev/null +++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt @@ -0,0 +1,22 @@ +Allwinner sun4i low res adc attached tablet keys +------------------------------------------------ + +Required properties: + - compatible: "allwinner,sun4i-lradc-keys" + - reg: mmio address range of the chip + - interrupts: interrupt to which the chip is connected + - allwinner,chan0-step: step in mV between keys must be 150 or 200 + - linux,chan0-keycodes: array of dt-bindings/input/input.h KEY_ codes + +Example: + +#include <dt-bindings/input/input.h> + + lradc: lradc at 01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + allwinner,chan0-step = <200>; + linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN + KEY_MENU KEY_ENTER KEY_HOME>; + }; diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index bb174c1..d95e6e4 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -544,6 +544,16 @@ config KEYBOARD_STMPE To compile this driver as a module, choose M here: the module will be called stmpe-keypad. +config KEYBOARD_SUN4I_LRADC + tristate "Allwinner sun4i low res adc attached tablet keys support" + depends on ARCH_SUNXI + help + This selects support for the Allwinner low res adc attached tablet + keys found on Allwinner sunxi SoCs. + + To compile this driver as a module, choose M here: the + module will be called sun4i-lradc-keys. + config KEYBOARD_DAVINCI tristate "TI DaVinci Key Scan" depends on ARCH_DAVINCI_DM365 diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index a699b61..f3265bd 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o diff --git a/drivers/input/keyboard/sun4i-lradc-keys.c b/drivers/input/keyboard/sun4i-lradc-keys.c new file mode 100644 index 0000000..5c55e17 --- /dev/null +++ b/drivers/input/keyboard/sun4i-lradc-keys.c @@ -0,0 +1,243 @@ +/* + * Allwinner sun4i low res adc attached tablet keys driver + * + * Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Allwinnner sunxi SoCs have a lradc which is specifically designed to have + * various (tablet) keys (ie home, back, search, etc). attached to it using + * a resistor network. This driver is for the keys on such boards. + * + * There are 2 channels, currently this driver only supports chan0 since there + * are no boards known to use chan1. The devicetree properties are already + * prefixed with chan0 as preparation for chan1 support in the future. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#define LRADC_CTRL 0x00 +#define LRADC_INTC 0x04 +#define LRADC_INTS 0x08 +#define LRADC_DATA0 0x0c +#define LRADC_DATA1 0x10 + +/* LRADC_CTRL bits */ +#define FIRST_CONVERT_DLY(x) ((x) << 24) /* 8 bits */ +#define CHAN_SELECT(x) ((x) << 22) /* 2 bits */ +#define CONTINUE_TIME_SEL(x) ((x) << 16) /* 4 bits */ +#define KEY_MODE_SEL(x) ((x) << 12) /* 2 bits */ +#define LEVELA_B_CNT(x) ((x) << 8) /* 4 bits */ +#define HOLD_EN(x) ((x) << 6) +#define LEVELB_VOL(x) ((x) << 4) /* 2 bits */ +#define SAMPLE_RATE(x) ((x) << 2) /* 2 bits */ +#define ENABLE(x) ((x) << 0) + +/* LRADC_INTC and LRADC_INTS bits */ +#define CHAN1_KEYUP_IRQ BIT(12) +#define CHAN1_ALRDY_HOLD_IRQ BIT(11) +#define CHAN1_HOLD_IRQ BIT(10) +#define CHAN1_KEYDOWN_IRQ BIT(9) +#define CHAN1_DATA_IRQ BIT(8) +#define CHAN0_KEYUP_IRQ BIT(4) +#define CHAN0_ALRDY_HOLD_IRQ BIT(3) +#define CHAN0_HOLD_IRQ BIT(2) +#define CHAN0_KEYDOWN_IRQ BIT(1) +#define CHAN0_DATA_IRQ BIT(0) + +#define MAX_KEYS 13 + +/* Lookup table to map the adc val to a keycode index for 150 mv step size */ +static const u8 adc_val_to_key_index_step150[64] = { + 0, 0, 0, + 1, 1, 1, 1, 1, + 2, 2, 2, 2, 2, + 3, 3, 3, 3, + 4, 4, 4, 4, 4, + 5, 5, 5, 5, 5, + 6, 6, 6, 6, 6, + 7, 7, 7, 7, + 8, 8, 8, 8, 8, + 9, 9, 9, 9, 9, + 10, 10, 10, 10, + 11, 11, 11, 11, + 12, 12, 12, 12, 12, 12, 12, 12, 12, 12 +}; + +/* Lookup table to map the adc val to a keycode index for 200 mv step size */ +static const u8 adc_val_to_key_index_step200[64] = { + 0, 0, 0, 0, 0, 0, 0, 0, + 1, 1, 1, 1, 1, 1, 1, + 2, 2, 2, 2, 2, 2, 2, + 3, 3, 3, 3, 3, 3, + 4, 4, 4, 4, 4, 4, + 5, 5, 5, 5, 5, 5, + 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 +}; + +struct sun4i_lradc_data { + struct device *dev; + struct input_dev *input; + void __iomem *base; + u32 chan0_step; + u32 chan0_keycode; + u32 chan0_keycodes[MAX_KEYS]; +}; + +static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id) +{ + struct sun4i_lradc_data *lradc = dev_id; + u32 ints, val; + + ints = readl(lradc->base + LRADC_INTS); + + /* + * lradc supports only one keypress at a time, release does not give + * any info as to which key was released, so we cache the keycode. + */ + if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) { + val = readl(lradc->base + LRADC_DATA0); + if (lradc->chan0_step == 150) + val = adc_val_to_key_index_step150[val]; + else + val = adc_val_to_key_index_step200[val]; + + lradc->chan0_keycode = lradc->chan0_keycodes[val]; + input_report_key(lradc->input, lradc->chan0_keycode, 1); + } + + if (ints & CHAN0_KEYUP_IRQ) { + input_report_key(lradc->input, lradc->chan0_keycode, 0); + lradc->chan0_keycode = 0; + } + + input_sync(lradc->input); + + writel(ints, lradc->base + LRADC_INTS); + + return IRQ_HANDLED; +} + +static int sun4i_lradc_open(struct input_dev *dev) +{ + struct sun4i_lradc_data *lradc = input_get_drvdata(dev); + + /* + * Set sample time to 16 ms / 62.5 Hz. Wait 2 * 16 ms for key to + * stabilize on press, wait (1 + 1) * 16 ms for key release + */ + writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | + SAMPLE_RATE(2) | ENABLE(1), lradc->base + LRADC_CTRL); + + writel(CHAN0_KEYUP_IRQ | CHAN0_KEYDOWN_IRQ, lradc->base + LRADC_INTC); + + return 0; +} + +static void sun4i_lradc_close(struct input_dev *dev) +{ + struct sun4i_lradc_data *lradc = input_get_drvdata(dev); + + /* Disable lradc, leave other settings unchanged */ + writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | + SAMPLE_RATE(2), lradc->base + LRADC_CTRL); + writel(0, lradc->base + LRADC_INTC); +} + +static int sun4i_lradc_probe(struct platform_device *pdev) +{ + struct sun4i_lradc_data *lradc; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + int i, ret; + + lradc = devm_kzalloc(dev, sizeof(struct sun4i_lradc_data), GFP_KERNEL); + if (!lradc) + return -ENOMEM; + + ret = of_property_read_u32(np, "allwinner,chan0-step", + &lradc->chan0_step); + if (ret || (lradc->chan0_step != 150 && lradc->chan0_step != 200)) { + dev_err(dev, "Invalid allwinner,chan0-step dt-property\n"); + return -EINVAL; + } + + for (i = 0; i < MAX_KEYS; i++) + of_property_read_u32_index(np, "linux,chan0-keycodes", + i, &lradc->chan0_keycodes[i]); + + lradc->dev = dev; + lradc->input = devm_input_allocate_device(dev); + if (!lradc->input) + return -ENOMEM; + + lradc->input->name = pdev->name; + lradc->input->phys = "sun4i_lradc/input0"; + lradc->input->open = sun4i_lradc_open; + lradc->input->close = sun4i_lradc_close; + lradc->input->id.bustype = BUS_HOST; + lradc->input->id.vendor = 0x0001; + lradc->input->id.product = 0x0001; + lradc->input->id.version = 0x0100; + lradc->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY); + for (i = 0; i < MAX_KEYS; i++) + set_bit(lradc->chan0_keycodes[i], lradc->input->keybit); + input_set_drvdata(lradc->input, lradc); + + lradc->base = devm_ioremap_resource(dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0)); + if (IS_ERR(lradc->base)) + return PTR_ERR(lradc->base); + + ret = devm_request_irq(dev, platform_get_irq(pdev, 0), sun4i_lradc_irq, + 0, "sun4i-lradc-keys", lradc); + if (ret) + return ret; + + ret = input_register_device(lradc->input); + if (ret) + return ret; + + platform_set_drvdata(pdev, lradc); + return 0; +} + +static const struct of_device_id sun4i_lradc_of_match[] = { + { .compatible = "allwinner,sun4i-lradc-keys", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match); + +static struct platform_driver sun4i_lradc_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "sun4i-lradc-keys", + .of_match_table = of_match_ptr(sun4i_lradc_of_match), + }, + .probe = sun4i_lradc_probe, +}; + +module_platform_driver(sun4i_lradc_driver); + +MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL"); -- 1.8.4.2 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 2/4] ARM: dts: sun4i: Add lradc node 2014-01-02 9:58 ` Hans de Goede @ 2014-01-02 9:58 ` Hans de Goede -1 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-01-02 9:58 UTC (permalink / raw) To: Dmitry Torokhov Cc: linux-input-u79uwXL29TY76Z2rM5mHXA, Maxime Ripard, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Hans de Goede Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- arch/arm/boot/dts/sun4i-a10.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 502f3e2..88f119a 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -447,6 +447,13 @@ interrupts = <24>; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-sid"; reg = <0x01c23800 0x10>; -- 1.8.4.2 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 2/4] ARM: dts: sun4i: Add lradc node @ 2014-01-02 9:58 ` Hans de Goede 0 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-01-02 9:58 UTC (permalink / raw) To: linux-arm-kernel Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- arch/arm/boot/dts/sun4i-a10.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 502f3e2..88f119a 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -447,6 +447,13 @@ interrupts = <24>; }; + lradc: lradc at 01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + sid: eeprom at 01c23800 { compatible = "allwinner,sun4i-sid"; reg = <0x01c23800 0x10>; -- 1.8.4.2 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 3/4] ARM: dts: sun5i: Add lradc node 2014-01-02 9:58 ` Hans de Goede @ 2014-01-02 9:58 ` Hans de Goede -1 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-01-02 9:58 UTC (permalink / raw) To: Dmitry Torokhov Cc: linux-input-u79uwXL29TY76Z2rM5mHXA, Maxime Ripard, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Hans de Goede Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 8 ++++++++ arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++++ arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 8 ++++++++ arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++ 4 files changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index e53fb12..d93318a 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun5i-a10s.dtsi" +#include <dt-bindings/input/input.h> / { model = "Olimex A10s-Olinuxino Micro"; @@ -75,6 +76,13 @@ }; }; + lradc: lradc@01c22800 { + allwinner,chan0-step = <200>; + linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN + KEY_MENU KEY_ENTER KEY_HOME>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 34dd303..8775bad 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -404,6 +404,13 @@ reg = <0x01c20c90 0x10>; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-sid"; reg = <0x01c23800 0x10>; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index ab566f7..4e99f43 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun5i-a13.dtsi" +#include <dt-bindings/input/input.h> / { model = "Olimex A13-Olinuxino"; @@ -55,6 +56,13 @@ }; }; + lradc: lradc@01c22800 { + allwinner,chan0-step = <200>; + linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN + KEY_MENU KEY_ENTER KEY_HOME>; + status = "okay"; + }; + uart1: serial@01c28400 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_b>; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 264cfa4..90c1ed3 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -362,6 +362,13 @@ reg = <0x01c20c90 0x10>; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-sid"; reg = <0x01c23800 0x10>; -- 1.8.4.2 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 3/4] ARM: dts: sun5i: Add lradc node @ 2014-01-02 9:58 ` Hans de Goede 0 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-01-02 9:58 UTC (permalink / raw) To: linux-arm-kernel Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 8 ++++++++ arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++++ arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 8 ++++++++ arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++ 4 files changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index e53fb12..d93318a 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun5i-a10s.dtsi" +#include <dt-bindings/input/input.h> / { model = "Olimex A10s-Olinuxino Micro"; @@ -75,6 +76,13 @@ }; }; + lradc: lradc at 01c22800 { + allwinner,chan0-step = <200>; + linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN + KEY_MENU KEY_ENTER KEY_HOME>; + status = "okay"; + }; + uart0: serial at 01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 34dd303..8775bad 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -404,6 +404,13 @@ reg = <0x01c20c90 0x10>; }; + lradc: lradc at 01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + sid: eeprom at 01c23800 { compatible = "allwinner,sun4i-sid"; reg = <0x01c23800 0x10>; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index ab566f7..4e99f43 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun5i-a13.dtsi" +#include <dt-bindings/input/input.h> / { model = "Olimex A13-Olinuxino"; @@ -55,6 +56,13 @@ }; }; + lradc: lradc at 01c22800 { + allwinner,chan0-step = <200>; + linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN + KEY_MENU KEY_ENTER KEY_HOME>; + status = "okay"; + }; + uart1: serial at 01c28400 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_b>; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 264cfa4..90c1ed3 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -362,6 +362,13 @@ reg = <0x01c20c90 0x10>; }; + lradc: lradc at 01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + sid: eeprom at 01c23800 { compatible = "allwinner,sun4i-sid"; reg = <0x01c23800 0x10>; -- 1.8.4.2 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 4/4] ARM: dts: sun7i: Add lradc node 2014-01-02 9:58 ` Hans de Goede @ 2014-01-02 9:58 ` Hans de Goede -1 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-01-02 9:58 UTC (permalink / raw) To: Dmitry Torokhov Cc: linux-input-u79uwXL29TY76Z2rM5mHXA, Maxime Ripard, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Hans de Goede Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 9 +++++++++ arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ 2 files changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 0ee2641..2c9a38f 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun7i-a20.dtsi" +#include <dt-bindings/input/input.h> / { model = "Olimex A20-Olinuxino Micro"; @@ -86,6 +87,14 @@ }; }; + lradc: lradc@01c22800 { + allwinner,chan0-step = <200>; + linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN + KEY_MENU KEY_SEARCH KEY_HOME + KEY_ESC KEY_ENTER>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 68e825a..3484275 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -531,6 +531,13 @@ interrupts = <0 24 1>; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <0 31 4>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; -- 1.8.4.2 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 4/4] ARM: dts: sun7i: Add lradc node @ 2014-01-02 9:58 ` Hans de Goede 0 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-01-02 9:58 UTC (permalink / raw) To: linux-arm-kernel Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 9 +++++++++ arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ 2 files changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 0ee2641..2c9a38f 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun7i-a20.dtsi" +#include <dt-bindings/input/input.h> / { model = "Olimex A20-Olinuxino Micro"; @@ -86,6 +87,14 @@ }; }; + lradc: lradc at 01c22800 { + allwinner,chan0-step = <200>; + linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN + KEY_MENU KEY_SEARCH KEY_HOME + KEY_ESC KEY_ENTER>; + status = "okay"; + }; + uart0: serial at 01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 68e825a..3484275 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -531,6 +531,13 @@ interrupts = <0 24 1>; }; + lradc: lradc at 01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <0 31 4>; + status = "disabled"; + }; + sid: eeprom at 01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; -- 1.8.4.2 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH v2 0/4] input: Add new sun4i-lradc-keys driver 2014-01-02 9:58 ` Hans de Goede @ 2014-09-01 13:47 ` Chen-Yu Tsai -1 siblings, 0 replies; 18+ messages in thread From: Chen-Yu Tsai @ 2014-09-01 13:47 UTC (permalink / raw) To: Hans De Goede Cc: Dmitry Torokhov, linux-input-u79uwXL29TY76Z2rM5mHXA, Maxime Ripard, linux-arm-kernel, linux-sunxi Hi Hans, It seems this series didn't get any attention. Care to respin on top of the latest tree? FYI, I have the series rebased on top of sunxi-next: https://github.com/wens/linux/commits/others/sunxi-lradc-input-v2 ChenYu On Thu, Jan 2, 2014 at 5:58 PM, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote: > Hi Dimitri et al, > > Here is v2 of the sun4i-lradc-keys driver, changes since v1: > > - Use include/dt-bindings/input/input.h > - Rename the keycodes property to linux,chan0-keycodes > > Regards, > > Hans > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org > For more options, visit https://groups.google.com/groups/opt_out. ^ permalink raw reply [flat|nested] 18+ messages in thread
* [linux-sunxi] [PATCH v2 0/4] input: Add new sun4i-lradc-keys driver @ 2014-09-01 13:47 ` Chen-Yu Tsai 0 siblings, 0 replies; 18+ messages in thread From: Chen-Yu Tsai @ 2014-09-01 13:47 UTC (permalink / raw) To: linux-arm-kernel Hi Hans, It seems this series didn't get any attention. Care to respin on top of the latest tree? FYI, I have the series rebased on top of sunxi-next: https://github.com/wens/linux/commits/others/sunxi-lradc-input-v2 ChenYu On Thu, Jan 2, 2014 at 5:58 PM, Hans de Goede <hdegoede@redhat.com> wrote: > Hi Dimitri et al, > > Here is v2 of the sun4i-lradc-keys driver, changes since v1: > > - Use include/dt-bindings/input/input.h > - Rename the keycodes property to linux,chan0-keycodes > > Regards, > > Hans > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. ^ permalink raw reply [flat|nested] 18+ messages in thread
[parent not found: <CAGb2v66VZqpHyghs5xn=RdDUVU=2PxFw5BJ-R5Xpsk-nfoDM0Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH v2 0/4] input: Add new sun4i-lradc-keys driver 2014-09-01 13:47 ` [linux-sunxi] " Chen-Yu Tsai @ 2014-09-01 13:53 ` Hans de Goede -1 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-09-01 13:53 UTC (permalink / raw) To: Chen-Yu Tsai Cc: Dmitry Torokhov, linux-input-u79uwXL29TY76Z2rM5mHXA, Maxime Ripard, linux-arm-kernel, linux-sunxi Hi, On 09/01/2014 03:47 PM, Chen-Yu Tsai wrote: > Hi Hans, > > It seems this series didn't get any attention. Care to respin on top > of the latest tree? > > FYI, I have the series rebased on top of sunxi-next: > https://github.com/wens/linux/commits/others/sunxi-lradc-input-v2 The problem is not it not getting attention, the problem is people were unhappy with the dt-bindings for this. I've a pretty good idea of how to fix up the bindings, but -ENOTIME so far. If you've a board you can test this on and want to take a shot at fixing it up, I can get into a little bit more detail. Regards, Hans ^ permalink raw reply [flat|nested] 18+ messages in thread
* [linux-sunxi] [PATCH v2 0/4] input: Add new sun4i-lradc-keys driver @ 2014-09-01 13:53 ` Hans de Goede 0 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-09-01 13:53 UTC (permalink / raw) To: linux-arm-kernel Hi, On 09/01/2014 03:47 PM, Chen-Yu Tsai wrote: > Hi Hans, > > It seems this series didn't get any attention. Care to respin on top > of the latest tree? > > FYI, I have the series rebased on top of sunxi-next: > https://github.com/wens/linux/commits/others/sunxi-lradc-input-v2 The problem is not it not getting attention, the problem is people were unhappy with the dt-bindings for this. I've a pretty good idea of how to fix up the bindings, but -ENOTIME so far. If you've a board you can test this on and want to take a shot at fixing it up, I can get into a little bit more detail. Regards, Hans ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v2 0/4] input: Add new sun4i-lradc-keys driver @ 2014-10-21 8:24 Hans de Goede [not found] ` <1413879890-7254-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 0 siblings, 1 reply; 18+ messages in thread From: Hans de Goede @ 2014-10-21 8:24 UTC (permalink / raw) To: Dmitry Torokhov Cc: Maxime Ripard, linux-input-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw Hi All, After a bit of a pause due to -ENOTIME, here is my 2nd attempt at getting support for the lradc attached tablet keys found one some Allwinner boards upstream. I've dubbed this v2 even though there has been more then one version before because I've lost count, and as said this represents the 2nd attempt at getting this upstream. The major change from the previous attempt is that now the devicetree description has one subnode per key just like gpio-keys has. I hope this version is to everyones liking and can be merged soon :) The intend is for the actual driver to go upstream through Dmitry's tree, where as the 3 dts patches should go upstream through Maxime's tree. Thanks & Regards, Hans ^ permalink raw reply [flat|nested] 18+ messages in thread
[parent not found: <1413879890-7254-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* [PATCH v2 4/4] ARM: dts: sun7i: Add lradc node 2014-10-21 8:24 Hans de Goede @ 2014-10-21 8:24 ` Hans de Goede 0 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-10-21 8:24 UTC (permalink / raw) To: Dmitry Torokhov Cc: Maxime Ripard, linux-input-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Hans de Goede Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 48 +++++++++++++++++++++++++ arch/arm/boot/dts/sun7i-a20.dtsi | 7 ++++ 2 files changed, 55 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 9d669cdf..85e7194 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -14,6 +14,7 @@ /dts-v1/; /include/ "sun7i-a20.dtsi" /include/ "sunxi-common-regulators.dtsi" +#include <dt-bindings/input/input.h> / { model = "Olimex A20-Olinuxino Micro"; @@ -100,6 +101,53 @@ }; }; + lradc: lradc@01c22800 { + vref-supply = <®_vcc3v0>; + status = "okay"; + button@19 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; + button@39 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; + button@60 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; + button@80 { + label = "Enter"; + linux,code = <KEY_SEARCH>; + channel = <0>; + voltage = <795090>; + }; + button@98 { + label = "Home"; + linux,code = <KEY_HOME>; + channel = <0>; + voltage = <987387>; + }; + button@118 { + label = "Home"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1184678>; + }; + button@139 { + label = "Home"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <1398804>; + }; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index f0a75c6..219cd57 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -911,6 +911,13 @@ status = "disabled"; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <0 31 4>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; -- 2.1.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 4/4] ARM: dts: sun7i: Add lradc node @ 2014-10-21 8:24 ` Hans de Goede 0 siblings, 0 replies; 18+ messages in thread From: Hans de Goede @ 2014-10-21 8:24 UTC (permalink / raw) To: linux-arm-kernel Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 48 +++++++++++++++++++++++++ arch/arm/boot/dts/sun7i-a20.dtsi | 7 ++++ 2 files changed, 55 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 9d669cdf..85e7194 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -14,6 +14,7 @@ /dts-v1/; /include/ "sun7i-a20.dtsi" /include/ "sunxi-common-regulators.dtsi" +#include <dt-bindings/input/input.h> / { model = "Olimex A20-Olinuxino Micro"; @@ -100,6 +101,53 @@ }; }; + lradc: lradc at 01c22800 { + vref-supply = <®_vcc3v0>; + status = "okay"; + button at 19 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; + button at 39 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; + button at 60 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; + button at 80 { + label = "Enter"; + linux,code = <KEY_SEARCH>; + channel = <0>; + voltage = <795090>; + }; + button at 98 { + label = "Home"; + linux,code = <KEY_HOME>; + channel = <0>; + voltage = <987387>; + }; + button at 118 { + label = "Home"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1184678>; + }; + button at 139 { + label = "Home"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <1398804>; + }; + }; + uart0: serial at 01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index f0a75c6..219cd57 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -911,6 +911,13 @@ status = "disabled"; }; + lradc: lradc at 01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <0 31 4>; + status = "disabled"; + }; + sid: eeprom at 01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; -- 2.1.0 ^ permalink raw reply related [flat|nested] 18+ messages in thread
[parent not found: <1413879890-7254-5-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH v2 4/4] ARM: dts: sun7i: Add lradc node 2014-10-21 8:24 ` Hans de Goede @ 2014-10-22 8:38 ` Maxime Ripard -1 siblings, 0 replies; 18+ messages in thread From: Maxime Ripard @ 2014-10-22 8:38 UTC (permalink / raw) To: Hans de Goede Cc: Dmitry Torokhov, linux-input-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw [-- Attachment #1: Type: text/plain, Size: 1120 bytes --] Hi Hans, On Tue, Oct 21, 2014 at 10:24:50AM +0200, Hans de Goede wrote: > Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> > --- > arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 48 +++++++++++++++++++++++++ > arch/arm/boot/dts/sun7i-a20.dtsi | 7 ++++ > 2 files changed, 55 insertions(+) > > diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts > index 9d669cdf..85e7194 100644 > --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts > +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts > @@ -14,6 +14,7 @@ > /dts-v1/; > /include/ "sun7i-a20.dtsi" > /include/ "sunxi-common-regulators.dtsi" > +#include <dt-bindings/input/input.h> I'm just wondering... Weren't we supposed to switch all includes to the preprocessor syntax in such a case? Maybe to handle the case were the DTSIs would have to use some preprocessors macros that wouldn't be expanded in this case? -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v2 4/4] ARM: dts: sun7i: Add lradc node @ 2014-10-22 8:38 ` Maxime Ripard 0 siblings, 0 replies; 18+ messages in thread From: Maxime Ripard @ 2014-10-22 8:38 UTC (permalink / raw) To: linux-arm-kernel Hi Hans, On Tue, Oct 21, 2014 at 10:24:50AM +0200, Hans de Goede wrote: > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 48 +++++++++++++++++++++++++ > arch/arm/boot/dts/sun7i-a20.dtsi | 7 ++++ > 2 files changed, 55 insertions(+) > > diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts > index 9d669cdf..85e7194 100644 > --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts > +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts > @@ -14,6 +14,7 @@ > /dts-v1/; > /include/ "sun7i-a20.dtsi" > /include/ "sunxi-common-regulators.dtsi" > +#include <dt-bindings/input/input.h> I'm just wondering... Weren't we supposed to switch all includes to the preprocessor syntax in such a case? Maybe to handle the case were the DTSIs would have to use some preprocessors macros that wouldn't be expanded in this case? -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141022/de46738a/attachment.sig> ^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2014-10-22 8:38 UTC | newest] Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2014-01-02 9:58 [PATCH v2 0/4] input: Add new sun4i-lradc-keys driver Hans de Goede 2014-01-02 9:58 ` Hans de Goede [not found] ` <1388656707-16181-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2014-01-02 9:58 ` [PATCH v2 1/4] " Hans de Goede 2014-01-02 9:58 ` Hans de Goede 2014-01-02 9:58 ` [PATCH v2 2/4] ARM: dts: sun4i: Add lradc node Hans de Goede 2014-01-02 9:58 ` Hans de Goede 2014-01-02 9:58 ` [PATCH v2 3/4] ARM: dts: sun5i: " Hans de Goede 2014-01-02 9:58 ` Hans de Goede 2014-01-02 9:58 ` [PATCH v2 4/4] ARM: dts: sun7i: " Hans de Goede 2014-01-02 9:58 ` Hans de Goede 2014-09-01 13:47 ` [PATCH v2 0/4] input: Add new sun4i-lradc-keys driver Chen-Yu Tsai 2014-09-01 13:47 ` [linux-sunxi] " Chen-Yu Tsai [not found] ` <CAGb2v66VZqpHyghs5xn=RdDUVU=2PxFw5BJ-R5Xpsk-nfoDM0Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2014-09-01 13:53 ` Hans de Goede 2014-09-01 13:53 ` [linux-sunxi] " Hans de Goede 2014-10-21 8:24 Hans de Goede [not found] ` <1413879890-7254-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2014-10-21 8:24 ` [PATCH v2 4/4] ARM: dts: sun7i: Add lradc node Hans de Goede 2014-10-21 8:24 ` Hans de Goede [not found] ` <1413879890-7254-5-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2014-10-22 8:38 ` Maxime Ripard 2014-10-22 8:38 ` Maxime Ripard
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.