[PATCHv3][ 1/2] ARM: dts: imx53: Add gpio and input dt includes.

[PATCHv3][ 1/2] ARM: dts: imx53: Add gpio and input dt includes.

[Denis Carikli]

This is to permit to use of the includes in the boards dts.

Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
ChangeLog v2->v3:
- Added The Cc
ChangeLog v1->v2:
- New patch to make it possible to fix the gpios and input in the next patch.
---
 arch/arm/boot/dts/imx53.dtsi |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 175a94c..6407526 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -13,6 +13,8 @@
 #include "skeleton.dtsi"
 #include "imx53-pingrp.h"
 #include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	aliases {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv3][ 1/2] ARM: dts: imx53: Add gpio and input dt includes.

[Denis Carikli]

This is to permit to use of the includes in the boards dts.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: devicetree at vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v2->v3:
- Added The Cc
ChangeLog v1->v2:
- New patch to make it possible to fix the gpios and input in the next patch.
---
 arch/arm/boot/dts/imx53.dtsi |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 175a94c..6407526 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -13,6 +13,8 @@
 #include "skeleton.dtsi"
 #include "imx53-pingrp.h"
 #include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	aliases {
-- 
1.7.9.5

[PATCHv3][ 2/2] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.

[Denis Carikli]

The following devices/functionalities were added:
 * Main and secondary UARTs.
 * i2c and the pcf8563 device.
 * Ethernet.
 * NAND.
 * The BP1 button.
 * The LED.
 * Watchdog.
 * SD.
 * USB host.

Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
ChangeLog v2->v3:
- Removed the useless regulator-always-on
- Added the rts and cts pins to the uart1 pinctrl

ChangeLog v1->v2:
- Added the board target in arch/arm/boot/dts/Makefile
- Fixed the gpios to now use the gpios defines.
- Fixed the button linux code to now use an input define.
- Fixed the regulator.
---
 arch/arm/boot/dts/Makefile                         |    1 +
 arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi       |   81 ++++++++++++++
 .../boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts  |  111 ++++++++++++++++++++
 3 files changed, 193 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
 create mode 100644 arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e1cb28..26891b3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -146,6 +146,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx51-babbage.dtb \
 	imx51-eukrea-mbimxsd51-baseboard.dtb \
 	imx53-ard.dtb \
+	imx53-eukrea-mbimxsd53-baseboard.dts \
 	imx53-evk.dtb \
 	imx53-m53evk.dtb \
 	imx53-mba53.dtb \
diff --git a/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi b/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
new file mode 100644
index 0000000..bf0cf86
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX53";
+	compatible = "eukrea,cpuimx53", "fsl,imx53";
+
+	memory {
+		reg = <0x70000000 0x20000000>; /* 512M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-eukrea {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_EIM_EB2__GPIO2_30 0x1e4
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <MX53_FEC_PINGRP1>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <MX53_I2C1_PINGRP1>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <MX53_NAND_PINGRP1>;
+
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
+&usbh1 {
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts b/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts
new file mode 100644
index 0000000..c2bf9a7
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "imx53-eukrea-cpuimx53.dtsi"
+
+/ {
+	model = "Eukrea MBIMX53SD";
+	compatible = "eukrea,mbimxsd53","eukrea,cpuimx53", "fsl,imx53";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		button-1 {
+			label = "BP1";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			reg = <0>;
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+};
+
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
+	cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+	vqmmc-supply = <&reg_3p3v>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx53-eukrea {
+		pinctrl_esdhc1: esdhc1 {
+			fsl,pins = <MX53_ESDHC1_PINGRP1>;
+		};
+
+		pinctrl_esdhc1_cd: esdhc1_cd {
+			fsl,pins = <MX53_PAD_DISP0_DAT23__GPIO5_17 0x80000000>;
+		};
+
+		pinctrl_gpiokeys: gpiokeysgrp {
+			fsl,pins = <MX53_PAD_KEY_COL4__GPIO4_14 0x80000000>;
+		};
+
+		pinctrl_gpioled: gpioledgrp {
+			fsl,pins = <MX53_PAD_KEY_ROW4__GPIO4_15 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <MX53_UART1_PINGRP2 MX53_UART1_PINGRP3>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <MX53_UART2_PINGRP2>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv3][ 2/2] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.

[Denis Carikli]

The following devices/functionalities were added:
 * Main and secondary UARTs.
 * i2c and the pcf8563 device.
 * Ethernet.
 * NAND.
 * The BP1 button.
 * The LED.
 * Watchdog.
 * SD.
 * USB host.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: devicetree at vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v2->v3:
- Removed the useless regulator-always-on
- Added the rts and cts pins to the uart1 pinctrl

ChangeLog v1->v2:
- Added the board target in arch/arm/boot/dts/Makefile
- Fixed the gpios to now use the gpios defines.
- Fixed the button linux code to now use an input define.
- Fixed the regulator.
---
 arch/arm/boot/dts/Makefile                         |    1 +
 arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi       |   81 ++++++++++++++
 .../boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts  |  111 ++++++++++++++++++++
 3 files changed, 193 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
 create mode 100644 arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e1cb28..26891b3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -146,6 +146,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx51-babbage.dtb \
 	imx51-eukrea-mbimxsd51-baseboard.dtb \
 	imx53-ard.dtb \
+	imx53-eukrea-mbimxsd53-baseboard.dts \
 	imx53-evk.dtb \
 	imx53-m53evk.dtb \
 	imx53-mba53.dtb \
diff --git a/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi b/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
new file mode 100644
index 0000000..bf0cf86
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX53";
+	compatible = "eukrea,cpuimx53", "fsl,imx53";
+
+	memory {
+		reg = <0x70000000 0x20000000>; /* 512M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563 at 51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-eukrea {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_EIM_EB2__GPIO2_30 0x1e4
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <MX53_FEC_PINGRP1>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <MX53_I2C1_PINGRP1>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <MX53_NAND_PINGRP1>;
+
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
+&usbh1 {
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts b/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts
new file mode 100644
index 0000000..c2bf9a7
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "imx53-eukrea-cpuimx53.dtsi"
+
+/ {
+	model = "Eukrea MBIMX53SD";
+	compatible = "eukrea,mbimxsd53","eukrea,cpuimx53", "fsl,imx53";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		button-1 {
+			label = "BP1";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator at 0 {
+			reg = <0>;
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+};
+
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
+	cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+	vqmmc-supply = <&reg_3p3v>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx53-eukrea {
+		pinctrl_esdhc1: esdhc1 {
+			fsl,pins = <MX53_ESDHC1_PINGRP1>;
+		};
+
+		pinctrl_esdhc1_cd: esdhc1_cd {
+			fsl,pins = <MX53_PAD_DISP0_DAT23__GPIO5_17 0x80000000>;
+		};
+
+		pinctrl_gpiokeys: gpiokeysgrp {
+			fsl,pins = <MX53_PAD_KEY_COL4__GPIO4_14 0x80000000>;
+		};
+
+		pinctrl_gpioled: gpioledgrp {
+			fsl,pins = <MX53_PAD_KEY_ROW4__GPIO4_15 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <MX53_UART1_PINGRP2 MX53_UART1_PINGRP3>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <MX53_UART2_PINGRP2>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
-- 
1.7.9.5

Re: [PATCHv3][ 1/2] ARM: dts: imx53: Add gpio and input dt includes.

[Shawn Guo]

On Mon, Jan 06, 2014 at 05:16:07PM +0100, Denis Carikli wrote:
> This is to permit to use of the includes in the boards dts.
> 
> Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
> Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
> Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
> Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
> Cc: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>

Applied, thanks.

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv3][ 1/2] ARM: dts: imx53: Add gpio and input dt includes.

[Shawn Guo]

On Mon, Jan 06, 2014 at 05:16:07PM +0100, Denis Carikli wrote:
> This is to permit to use of the includes in the boards dts.
> 
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: Grant Likely <grant.likely@linaro.org>
> Cc: devicetree at vger.kernel.org
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Shawn Guo <shawn.guo@linaro.org>
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: Eric B?nard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>

Applied, thanks.

Re: [PATCHv3][ 2/2] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.

[Shawn Guo]

On Mon, Jan 06, 2014 at 05:16:08PM +0100, Denis Carikli wrote:
> +&esdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
> +	cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
> +	vqmmc-supply = <&reg_3p3v>;
> +	vmmc-supply = <&reg_3p3v>;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	imx53-eukrea {
> +		pinctrl_esdhc1: esdhc1 {

s/esdhc1/esdhc1grp

> +			fsl,pins = <MX53_ESDHC1_PINGRP1>;
> +		};
> +
> +		pinctrl_esdhc1_cd: esdhc1_cd {
> +			fsl,pins = <MX53_PAD_DISP0_DAT23__GPIO5_17 0x80000000>;
> +		};

Please merge above two nodes into one as below.

	pinctrl_esdhc1: esdhc1grp {
		fsl,pins = <
			MX53_ESDHC1_PINGRP1
			MX53_PAD_DISP0_DAT23__GPIO5_17 0x80000000 /* CD */
		>;
	};

> +
> +		pinctrl_gpiokeys: gpiokeysgrp {
> +			fsl,pins = <MX53_PAD_KEY_COL4__GPIO4_14 0x80000000>;
> +		};
> +
> +		pinctrl_gpioled: gpioledgrp {
> +			fsl,pins = <MX53_PAD_KEY_ROW4__GPIO4_15 0x80000000>;
> +		};
> +
> +		pinctrl_uart1: uart1grp {
> +			fsl,pins = <MX53_UART1_PINGRP2 MX53_UART1_PINGRP3>;

Please put two macros onto two lines.

Shawn

> +		};
> +
> +		pinctrl_uart2: uart2grp {
> +			fsl,pins = <MX53_UART2_PINGRP2>;
> +		};
> +	};
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	fsl,uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	fsl,uart-has-rtscts;
> +	status = "okay";
> +};
> -- 
> 1.7.9.5
> 

[PATCHv3][ 2/2] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.

[Shawn Guo]

On Mon, Jan 06, 2014 at 05:16:08PM +0100, Denis Carikli wrote:
> +&esdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
> +	cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
> +	vqmmc-supply = <&reg_3p3v>;
> +	vmmc-supply = <&reg_3p3v>;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	imx53-eukrea {
> +		pinctrl_esdhc1: esdhc1 {

s/esdhc1/esdhc1grp

> +			fsl,pins = <MX53_ESDHC1_PINGRP1>;
> +		};
> +
> +		pinctrl_esdhc1_cd: esdhc1_cd {
> +			fsl,pins = <MX53_PAD_DISP0_DAT23__GPIO5_17 0x80000000>;
> +		};

Please merge above two nodes into one as below.

	pinctrl_esdhc1: esdhc1grp {
		fsl,pins = <
			MX53_ESDHC1_PINGRP1
			MX53_PAD_DISP0_DAT23__GPIO5_17 0x80000000 /* CD */
		>;
	};

> +
> +		pinctrl_gpiokeys: gpiokeysgrp {
> +			fsl,pins = <MX53_PAD_KEY_COL4__GPIO4_14 0x80000000>;
> +		};
> +
> +		pinctrl_gpioled: gpioledgrp {
> +			fsl,pins = <MX53_PAD_KEY_ROW4__GPIO4_15 0x80000000>;
> +		};
> +
> +		pinctrl_uart1: uart1grp {
> +			fsl,pins = <MX53_UART1_PINGRP2 MX53_UART1_PINGRP3>;

Please put two macros onto two lines.

Shawn

> +		};
> +
> +		pinctrl_uart2: uart2grp {
> +			fsl,pins = <MX53_UART2_PINGRP2>;
> +		};
> +	};
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	fsl,uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	fsl,uart-has-rtscts;
> +	status = "okay";
> +};
> -- 
> 1.7.9.5
>