From: Roger Quadros <rogerq@ti.com>
To: <bcousson@baylibre.com>, <tony@atomide.com>
Cc: <balbi@ti.com>, <arnd@arndb.de>, <sre@debian.org>,
<mark.rutland@arm.com>, <m.paolino@virtualopensystems.com>,
<linux-omap@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v5 0/9] USB Host support for OMAP5 uEVM (for 3.14)
Date: Thu, 9 Jan 2014 17:38:14 +0530 [thread overview]
Message-ID: <1389269303-30465-1-git-send-email-rogerq@ti.com> (raw)
Hi Benoit & Tony,
This patchset brings up USB Host ports and Ethernet port on
the OMAP5 uEVM board.
It depends on the TI Clock DT conversion patches [1] and is based
on 3.13-rc7
[1] - http://article.gmane.org/gmane.linux.ports.arm.kernel/289895
NOTE: I've tested this only on the OMAP5 uEVM board. Since the patchset
changes could affect OMAP3/4, it must be verified at least on
a Beagleboard and a Panda board before being pulled in.
I request someone to verify this on OMAP3/4 since I don't have access
to those boards at the moment. Thanks.
Changelog:
v5:
- Expose all clocks in the DT binding document for mfd:omap-usb-host
and mfd:omap-usb-tll
v4:
- Updated DT binding document for clock binding
v3:
- Rebased on top of 3.13-rc7
cheers,
-roger
Roger Quadros (9):
mfd: omap-usb-host: Use resource managed clk_get()
mfd: omap-usb-host: Get clocks based on hardware revision
mfd: omap-usb-host: Update DT clock binding information
mfd: omap-usb-tll: Update DT clock binding information
ARM: dts: omap4: Update omap-usb-host node
ARM: dts: omap5: Update omap-usb-host node
ARM: dts: omap4-panda: Provide USB PHY clock
ARM: dts: omap5-uevm: Provide USB PHY clock
ARM: OMAP2+: Remove legacy_init_ehci_clk()
.../devicetree/bindings/mfd/omap-usb-host.txt | 23 +++
.../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4.dtsi | 6 +
arch/arm/boot/dts/omap5-uevm.dts | 8 +-
arch/arm/boot/dts/omap5.dtsi | 6 +
arch/arm/mach-omap2/pdata-quirks.c | 16 --
drivers/mfd/omap-usb-host.c | 172 ++++++++++-----------
8 files changed, 128 insertions(+), 121 deletions(-)
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com>
To: bcousson@baylibre.com, tony@atomide.com
Cc: mark.rutland@arm.com, m.paolino@virtualopensystems.com,
arnd@arndb.de, devicetree@vger.kernel.org, sre@debian.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
balbi@ti.com, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Roger Quadros <rogerq@ti.com>
Subject: [PATCH v5 0/9] USB Host support for OMAP5 uEVM (for 3.14)
Date: Thu, 9 Jan 2014 17:38:14 +0530 [thread overview]
Message-ID: <1389269303-30465-1-git-send-email-rogerq@ti.com> (raw)
Hi Benoit & Tony,
This patchset brings up USB Host ports and Ethernet port on
the OMAP5 uEVM board.
It depends on the TI Clock DT conversion patches [1] and is based
on 3.13-rc7
[1] - http://article.gmane.org/gmane.linux.ports.arm.kernel/289895
NOTE: I've tested this only on the OMAP5 uEVM board. Since the patchset
changes could affect OMAP3/4, it must be verified at least on
a Beagleboard and a Panda board before being pulled in.
I request someone to verify this on OMAP3/4 since I don't have access
to those boards at the moment. Thanks.
Changelog:
v5:
- Expose all clocks in the DT binding document for mfd:omap-usb-host
and mfd:omap-usb-tll
v4:
- Updated DT binding document for clock binding
v3:
- Rebased on top of 3.13-rc7
cheers,
-roger
Roger Quadros (9):
mfd: omap-usb-host: Use resource managed clk_get()
mfd: omap-usb-host: Get clocks based on hardware revision
mfd: omap-usb-host: Update DT clock binding information
mfd: omap-usb-tll: Update DT clock binding information
ARM: dts: omap4: Update omap-usb-host node
ARM: dts: omap5: Update omap-usb-host node
ARM: dts: omap4-panda: Provide USB PHY clock
ARM: dts: omap5-uevm: Provide USB PHY clock
ARM: OMAP2+: Remove legacy_init_ehci_clk()
.../devicetree/bindings/mfd/omap-usb-host.txt | 23 +++
.../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4.dtsi | 6 +
arch/arm/boot/dts/omap5-uevm.dts | 8 +-
arch/arm/boot/dts/omap5.dtsi | 6 +
arch/arm/mach-omap2/pdata-quirks.c | 16 --
drivers/mfd/omap-usb-host.c | 172 ++++++++++-----------
8 files changed, 128 insertions(+), 121 deletions(-)
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: rogerq@ti.com (Roger Quadros)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/9] USB Host support for OMAP5 uEVM (for 3.14)
Date: Thu, 9 Jan 2014 17:38:14 +0530 [thread overview]
Message-ID: <1389269303-30465-1-git-send-email-rogerq@ti.com> (raw)
Hi Benoit & Tony,
This patchset brings up USB Host ports and Ethernet port on
the OMAP5 uEVM board.
It depends on the TI Clock DT conversion patches [1] and is based
on 3.13-rc7
[1] - http://article.gmane.org/gmane.linux.ports.arm.kernel/289895
NOTE: I've tested this only on the OMAP5 uEVM board. Since the patchset
changes could affect OMAP3/4, it must be verified at least on
a Beagleboard and a Panda board before being pulled in.
I request someone to verify this on OMAP3/4 since I don't have access
to those boards at the moment. Thanks.
Changelog:
v5:
- Expose all clocks in the DT binding document for mfd:omap-usb-host
and mfd:omap-usb-tll
v4:
- Updated DT binding document for clock binding
v3:
- Rebased on top of 3.13-rc7
cheers,
-roger
Roger Quadros (9):
mfd: omap-usb-host: Use resource managed clk_get()
mfd: omap-usb-host: Get clocks based on hardware revision
mfd: omap-usb-host: Update DT clock binding information
mfd: omap-usb-tll: Update DT clock binding information
ARM: dts: omap4: Update omap-usb-host node
ARM: dts: omap5: Update omap-usb-host node
ARM: dts: omap4-panda: Provide USB PHY clock
ARM: dts: omap5-uevm: Provide USB PHY clock
ARM: OMAP2+: Remove legacy_init_ehci_clk()
.../devicetree/bindings/mfd/omap-usb-host.txt | 23 +++
.../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4.dtsi | 6 +
arch/arm/boot/dts/omap5-uevm.dts | 8 +-
arch/arm/boot/dts/omap5.dtsi | 6 +
arch/arm/mach-omap2/pdata-quirks.c | 16 --
drivers/mfd/omap-usb-host.c | 172 ++++++++++-----------
8 files changed, 128 insertions(+), 121 deletions(-)
--
1.8.3.2
next reply other threads:[~2014-01-09 12:09 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-09 12:08 Roger Quadros [this message]
2014-01-09 12:08 ` [PATCH v5 0/9] USB Host support for OMAP5 uEVM (for 3.14) Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` [PATCH v5 1/9] mfd: omap-usb-host: Use resource managed clk_get() Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-10 10:12 ` Lee Jones
2014-01-10 10:12 ` Lee Jones
2014-01-09 12:08 ` [PATCH v5 2/9] mfd: omap-usb-host: Get clocks based on hardware revision Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-10 10:22 ` Lee Jones
2014-01-10 10:22 ` Lee Jones
2014-01-10 14:13 ` Arnd Bergmann
2014-01-10 14:13 ` Arnd Bergmann
2014-01-10 14:26 ` Lee Jones
2014-01-10 14:26 ` Lee Jones
2014-01-20 9:14 ` Roger Quadros
2014-01-20 9:14 ` Roger Quadros
2014-01-20 9:14 ` Roger Quadros
2014-01-09 12:08 ` [PATCH v5 3/9] mfd: omap-usb-host: Update DT clock binding information Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-10 10:11 ` Lee Jones
2014-01-10 10:11 ` Lee Jones
2014-01-10 10:11 ` Lee Jones
2014-01-20 9:14 ` Roger Quadros
2014-01-20 9:14 ` Roger Quadros
2014-01-20 9:14 ` Roger Quadros
2014-01-09 12:08 ` [PATCH v5 4/9] mfd: omap-usb-tll: " Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` [PATCH v5 5/9] ARM: dts: omap4: Update omap-usb-host node Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` [PATCH v5 6/9] ARM: dts: omap5: " Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` [PATCH v5 7/9] ARM: dts: omap4-panda: Provide USB PHY clock Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` [PATCH v5 8/9] ARM: dts: omap5-uevm: " Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` [PATCH v5 9/9] ARM: OMAP2+: Remove legacy_init_ehci_clk() Roger Quadros
2014-01-09 12:08 ` Roger Quadros
2014-01-09 12:08 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389269303-30465-1-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=arnd@arndb.de \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=m.paolino@virtualopensystems.com \
--cc=mark.rutland@arm.com \
--cc=sre@debian.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.