* [PATCH 1/5] ASoC: pcm: Properly initialize hw->rate_max
@ 2014-01-10 15:06 Lars-Peter Clausen
2014-01-10 15:06 ` [PATCH 2/5] ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates Lars-Peter Clausen
` (3 more replies)
0 siblings, 4 replies; 7+ messages in thread
From: Lars-Peter Clausen @ 2014-01-10 15:06 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood, Takashi Iwai; +Cc: alsa-devel, Lars-Peter Clausen
If none of the components (CODEC or CPU DAI) sets a maximum sample rate we'll
end up with the rate_max field of the runtime hardware set to 0. (Note that it
is still possible for the components to constrain the supported sample rates
using other methods, e.g. setting a list constraint) If rate_max is 0 this means
that the sound card doesn't support any rates at all, which is not the desired
result. So initialize rate_max to UINT_MAX. For symmetry reasons also set
rate_min to 0.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/soc-pcm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 313adba..b6e0c32 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -252,6 +252,9 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_runtime *runtime,
& (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS))
hw->rates |= codec_stream->rates;
+ hw->rate_min = 0;
+ hw->rate_max = UINT_MAX;
+
snd_pcm_limit_hw_rates(runtime);
hw->rate_min = max(hw->rate_min, cpu_stream->rate_min);
--
1.8.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/5] ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates
2014-01-10 15:06 [PATCH 1/5] ASoC: pcm: Properly initialize hw->rate_max Lars-Peter Clausen
@ 2014-01-10 15:06 ` Lars-Peter Clausen
2014-01-10 15:06 ` [PATCH 3/5] ASoC: s6000: " Lars-Peter Clausen
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Lars-Peter Clausen @ 2014-01-10 15:06 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood, Takashi Iwai
Cc: alsa-devel, Lars-Peter Clausen, Kuninori Morimoto
SNDRV_PCM_RATE_CONTINUOUS means that all rates (possibly limited to a certain
interval) are supported. There is no need to manually set other rate bits.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
sound/soc/fsl/fsl_ssi.c | 3 +--
sound/soc/fsl/mpc5200_psc_i2s.c | 3 +--
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index f662ddd..33a4738 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -81,8 +81,7 @@ static inline void write_ssi_mask(u32 __iomem *addr, u32 clear, u32 set)
* ALSA that we support all rates and let the codec driver decide what rates
* are really supported.
*/
-#define FSLSSI_I2S_RATES (SNDRV_PCM_RATE_5512 | SNDRV_PCM_RATE_8000_192000 | \
- SNDRV_PCM_RATE_CONTINUOUS)
+#define FSLSSI_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS
/**
* FSLSSI_I2S_FORMATS: audio formats supported by the SSI
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
index f4efaad..5d07e8a 100644
--- a/sound/soc/fsl/mpc5200_psc_i2s.c
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -26,8 +26,7 @@
* ALSA that we support all rates and let the codec driver decide what rates
* are really supported.
*/
-#define PSC_I2S_RATES (SNDRV_PCM_RATE_5512 | SNDRV_PCM_RATE_8000_192000 | \
- SNDRV_PCM_RATE_CONTINUOUS)
+#define PSC_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS
/**
* PSC_I2S_FORMATS: audio formats supported by the PSC I2S mode
--
1.8.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/5] ASoC: s6000: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates
2014-01-10 15:06 [PATCH 1/5] ASoC: pcm: Properly initialize hw->rate_max Lars-Peter Clausen
2014-01-10 15:06 ` [PATCH 2/5] ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates Lars-Peter Clausen
@ 2014-01-10 15:06 ` Lars-Peter Clausen
2014-01-10 15:06 ` [PATCH 4/5] ALSA: Add helper function for intersecting two rate masks Lars-Peter Clausen
2014-01-10 15:06 ` [PATCH 5/5] ASoC: pcm: Use snd_pcm_rate_mask_intersect() helper Lars-Peter Clausen
3 siblings, 0 replies; 7+ messages in thread
From: Lars-Peter Clausen @ 2014-01-10 15:06 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood, Takashi Iwai
Cc: alsa-devel, Lars-Peter Clausen, Acked-by: Daniel Glöckner
SNDRV_PCM_RATE_CONTINUOUS means that all rates (possibly limited to a certain
interval) are supported. There is no need to manually set other rate bits.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Acked-by: Daniel Glöckner <daniel-gl@gmx.net>
---
sound/soc/s6000/s6000-i2s.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/sound/soc/s6000/s6000-i2s.c b/sound/soc/s6000/s6000-i2s.c
index 73bb99f..7eba797 100644
--- a/sound/soc/s6000/s6000-i2s.c
+++ b/sound/soc/s6000/s6000-i2s.c
@@ -405,8 +405,7 @@ static int s6000_i2s_dai_probe(struct snd_soc_dai *dai)
return 0;
}
-#define S6000_I2S_RATES (SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_5512 | \
- SNDRV_PCM_RATE_8000_192000)
+#define S6000_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS
#define S6000_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
static const struct snd_soc_dai_ops s6000_i2s_dai_ops = {
--
1.8.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 4/5] ALSA: Add helper function for intersecting two rate masks
2014-01-10 15:06 [PATCH 1/5] ASoC: pcm: Properly initialize hw->rate_max Lars-Peter Clausen
2014-01-10 15:06 ` [PATCH 2/5] ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates Lars-Peter Clausen
2014-01-10 15:06 ` [PATCH 3/5] ASoC: s6000: " Lars-Peter Clausen
@ 2014-01-10 15:06 ` Lars-Peter Clausen
2014-01-10 15:17 ` Takashi Iwai
2014-01-10 15:06 ` [PATCH 5/5] ASoC: pcm: Use snd_pcm_rate_mask_intersect() helper Lars-Peter Clausen
3 siblings, 1 reply; 7+ messages in thread
From: Lars-Peter Clausen @ 2014-01-10 15:06 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood, Takashi Iwai; +Cc: alsa-devel, Lars-Peter Clausen
A bit of special care is necessary when creating the intersection of two rate
masks. This comes from the special meaning of the SNDRV_PCM_RATE_CONTINUOUS and
SNDRV_PCM_RATE_KNOT bits, which needs special handling when intersecting two
rate masks. SNDRV_PCM_RATE_CONTINUOUS means the hardware supports all rates in a
specific interval. SNDRV_PCM_RATE_KNOT means the hardware supports a set of
discrete rates specified by a list constraint. For all other cases the supported
rates are specified directly in the rate mask.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
include/sound/pcm.h | 2 ++
sound/core/pcm_misc.c | 39 +++++++++++++++++++++++++++++++++++++++
2 files changed, 41 insertions(+)
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 84b10f9..d017091 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -901,6 +901,8 @@ extern const struct snd_pcm_hw_constraint_list snd_pcm_known_rates;
int snd_pcm_limit_hw_rates(struct snd_pcm_runtime *runtime);
unsigned int snd_pcm_rate_to_rate_bit(unsigned int rate);
unsigned int snd_pcm_rate_bit_to_rate(unsigned int rate_bit);
+unsigned int snd_pcm_rate_mask_intersect(unsigned int rates_a,
+ unsigned int rates_b);
static inline void snd_pcm_set_runtime_buffer(struct snd_pcm_substream *substream,
struct snd_dma_buffer *bufp)
diff --git a/sound/core/pcm_misc.c b/sound/core/pcm_misc.c
index 43f24cc..1552537 100644
--- a/sound/core/pcm_misc.c
+++ b/sound/core/pcm_misc.c
@@ -514,3 +514,42 @@ unsigned int snd_pcm_rate_bit_to_rate(unsigned int rate_bit)
return 0;
}
EXPORT_SYMBOL(snd_pcm_rate_bit_to_rate);
+
+static unsigned int snd_pcm_rate_mask_sanitize(unsigned int rates)
+{
+ if (rates & SNDRV_PCM_RATE_CONTINUOUS)
+ return SNDRV_PCM_RATE_CONTINUOUS;
+ else if (rates & SNDRV_PCM_RATE_KNOT)
+ return SNDRV_PCM_RATE_KNOT;
+ return rates;
+}
+
+/**
+ * snd_pcm_rate_mask_intersect - computes the intersection between two rate masks
+ * @rates_a: The first rate mask
+ * @rates_b: The second rate mask
+ *
+ * This function computes the rates that are supported by both rate masks passed
+ * to the function. It will take care of the special handling of
+ * SNDRV_PCM_RATE_CONTINUOUS and SNDRV_PCM_RATE_KNOT.
+ *
+ * Return: A rate mask containing the rates that are supported by both rates_a
+ * and rates_b.
+ */
+unsigned int snd_pcm_rate_mask_intersect(unsigned int rates_a,
+ unsigned int rates_b)
+{
+ rates_a = snd_pcm_rate_mask_sanitize(rates_a);
+ rates_b = snd_pcm_rate_mask_sanitize(rates_b);
+
+ if (rates_a & SNDRV_PCM_RATE_CONTINUOUS)
+ return rates_b;
+ else if (rates_b & SNDRV_PCM_RATE_CONTINUOUS)
+ return rates_a;
+ else if (rates_a & SNDRV_PCM_RATE_KNOT)
+ return rates_b;
+ else if (rates_b & SNDRV_PCM_RATE_KNOT)
+ return rates_a;
+ return rates_a & rates_b;
+}
+EXPORT_SYMBOL(snd_pcm_rate_mask_intersect);
--
1.8.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 5/5] ASoC: pcm: Use snd_pcm_rate_mask_intersect() helper
2014-01-10 15:06 [PATCH 1/5] ASoC: pcm: Properly initialize hw->rate_max Lars-Peter Clausen
` (2 preceding siblings ...)
2014-01-10 15:06 ` [PATCH 4/5] ALSA: Add helper function for intersecting two rate masks Lars-Peter Clausen
@ 2014-01-10 15:06 ` Lars-Peter Clausen
3 siblings, 0 replies; 7+ messages in thread
From: Lars-Peter Clausen @ 2014-01-10 15:06 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood, Takashi Iwai; +Cc: alsa-devel, Lars-Peter Clausen
Instead of open-coding the intersecting of two rate masks (and getting slightly
wrong for some of the corner cases) use the new snd_pcm_rate_mask_intersect()
helper function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/soc-pcm.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index b6e0c32..5932971 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -244,13 +244,8 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_runtime *runtime,
hw->formats &= codec_stream->formats & cpu_stream->formats;
else
hw->formats = codec_stream->formats & cpu_stream->formats;
- hw->rates = codec_stream->rates & cpu_stream->rates;
- if (codec_stream->rates
- & (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS))
- hw->rates |= cpu_stream->rates;
- if (cpu_stream->rates
- & (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS))
- hw->rates |= codec_stream->rates;
+ hw->rates = snd_pcm_rate_mask_intersect(codec_stream->rates,
+ cpu_stream->rates);
hw->rate_min = 0;
hw->rate_max = UINT_MAX;
--
1.8.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 4/5] ALSA: Add helper function for intersecting two rate masks
2014-01-10 15:06 ` [PATCH 4/5] ALSA: Add helper function for intersecting two rate masks Lars-Peter Clausen
@ 2014-01-10 15:17 ` Takashi Iwai
2014-01-10 15:49 ` Lars-Peter Clausen
0 siblings, 1 reply; 7+ messages in thread
From: Takashi Iwai @ 2014-01-10 15:17 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: alsa-devel, Mark Brown, Liam Girdwood
At Fri, 10 Jan 2014 16:06:35 +0100,
Lars-Peter Clausen wrote:
>
> A bit of special care is necessary when creating the intersection of two rate
> masks. This comes from the special meaning of the SNDRV_PCM_RATE_CONTINUOUS and
> SNDRV_PCM_RATE_KNOT bits, which needs special handling when intersecting two
> rate masks. SNDRV_PCM_RATE_CONTINUOUS means the hardware supports all rates in a
> specific interval. SNDRV_PCM_RATE_KNOT means the hardware supports a set of
> discrete rates specified by a list constraint. For all other cases the supported
> rates are specified directly in the rate mask.
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> ---
> include/sound/pcm.h | 2 ++
> sound/core/pcm_misc.c | 39 +++++++++++++++++++++++++++++++++++++++
> 2 files changed, 41 insertions(+)
>
> diff --git a/include/sound/pcm.h b/include/sound/pcm.h
> index 84b10f9..d017091 100644
> --- a/include/sound/pcm.h
> +++ b/include/sound/pcm.h
> @@ -901,6 +901,8 @@ extern const struct snd_pcm_hw_constraint_list snd_pcm_known_rates;
> int snd_pcm_limit_hw_rates(struct snd_pcm_runtime *runtime);
> unsigned int snd_pcm_rate_to_rate_bit(unsigned int rate);
> unsigned int snd_pcm_rate_bit_to_rate(unsigned int rate_bit);
> +unsigned int snd_pcm_rate_mask_intersect(unsigned int rates_a,
> + unsigned int rates_b);
>
> static inline void snd_pcm_set_runtime_buffer(struct snd_pcm_substream *substream,
> struct snd_dma_buffer *bufp)
> diff --git a/sound/core/pcm_misc.c b/sound/core/pcm_misc.c
> index 43f24cc..1552537 100644
> --- a/sound/core/pcm_misc.c
> +++ b/sound/core/pcm_misc.c
> @@ -514,3 +514,42 @@ unsigned int snd_pcm_rate_bit_to_rate(unsigned int rate_bit)
> return 0;
> }
> EXPORT_SYMBOL(snd_pcm_rate_bit_to_rate);
> +
> +static unsigned int snd_pcm_rate_mask_sanitize(unsigned int rates)
> +{
> + if (rates & SNDRV_PCM_RATE_CONTINUOUS)
> + return SNDRV_PCM_RATE_CONTINUOUS;
> + else if (rates & SNDRV_PCM_RATE_KNOT)
> + return SNDRV_PCM_RATE_KNOT;
> + return rates;
> +}
> +
> +/**
> + * snd_pcm_rate_mask_intersect - computes the intersection between two rate masks
> + * @rates_a: The first rate mask
> + * @rates_b: The second rate mask
> + *
> + * This function computes the rates that are supported by both rate masks passed
> + * to the function. It will take care of the special handling of
> + * SNDRV_PCM_RATE_CONTINUOUS and SNDRV_PCM_RATE_KNOT.
> + *
> + * Return: A rate mask containing the rates that are supported by both rates_a
> + * and rates_b.
> + */
> +unsigned int snd_pcm_rate_mask_intersect(unsigned int rates_a,
> + unsigned int rates_b)
> +{
> + rates_a = snd_pcm_rate_mask_sanitize(rates_a);
> + rates_b = snd_pcm_rate_mask_sanitize(rates_b);
> +
> + if (rates_a & SNDRV_PCM_RATE_CONTINUOUS)
> + return rates_b;
> + else if (rates_b & SNDRV_PCM_RATE_CONTINUOUS)
> + return rates_a;
> + else if (rates_a & SNDRV_PCM_RATE_KNOT)
> + return rates_b;
> + else if (rates_b & SNDRV_PCM_RATE_KNOT)
> + return rates_a;
> + return rates_a & rates_b;
> +}
> +EXPORT_SYMBOL(snd_pcm_rate_mask_intersect);
We can use EXPORT_SYMBOL_GPL() for new functions safely.
I suppose this patchset will go through ASoC tree? Then take my ack:
Reviewed-by: Takashi Iwai <tiwai@suse.de>
thanks,
Takashi
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 4/5] ALSA: Add helper function for intersecting two rate masks
2014-01-10 15:17 ` Takashi Iwai
@ 2014-01-10 15:49 ` Lars-Peter Clausen
0 siblings, 0 replies; 7+ messages in thread
From: Lars-Peter Clausen @ 2014-01-10 15:49 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel, Mark Brown, Liam Girdwood
On 01/10/2014 04:17 PM, Takashi Iwai wrote:
> At Fri, 10 Jan 2014 16:06:35 +0100,
> Lars-Peter Clausen wrote:
>>
>> A bit of special care is necessary when creating the intersection of two rate
>> masks. This comes from the special meaning of the SNDRV_PCM_RATE_CONTINUOUS and
>> SNDRV_PCM_RATE_KNOT bits, which needs special handling when intersecting two
>> rate masks. SNDRV_PCM_RATE_CONTINUOUS means the hardware supports all rates in a
>> specific interval. SNDRV_PCM_RATE_KNOT means the hardware supports a set of
>> discrete rates specified by a list constraint. For all other cases the supported
>> rates are specified directly in the rate mask.
>>
>> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
>> ---
>> include/sound/pcm.h | 2 ++
>> sound/core/pcm_misc.c | 39 +++++++++++++++++++++++++++++++++++++++
>> 2 files changed, 41 insertions(+)
>>
>> diff --git a/include/sound/pcm.h b/include/sound/pcm.h
>> index 84b10f9..d017091 100644
>> --- a/include/sound/pcm.h
>> +++ b/include/sound/pcm.h
>> @@ -901,6 +901,8 @@ extern const struct snd_pcm_hw_constraint_list snd_pcm_known_rates;
>> int snd_pcm_limit_hw_rates(struct snd_pcm_runtime *runtime);
>> unsigned int snd_pcm_rate_to_rate_bit(unsigned int rate);
>> unsigned int snd_pcm_rate_bit_to_rate(unsigned int rate_bit);
>> +unsigned int snd_pcm_rate_mask_intersect(unsigned int rates_a,
>> + unsigned int rates_b);
>>
>> static inline void snd_pcm_set_runtime_buffer(struct snd_pcm_substream *substream,
>> struct snd_dma_buffer *bufp)
>> diff --git a/sound/core/pcm_misc.c b/sound/core/pcm_misc.c
>> index 43f24cc..1552537 100644
>> --- a/sound/core/pcm_misc.c
>> +++ b/sound/core/pcm_misc.c
>> @@ -514,3 +514,42 @@ unsigned int snd_pcm_rate_bit_to_rate(unsigned int rate_bit)
>> return 0;
>> }
>> EXPORT_SYMBOL(snd_pcm_rate_bit_to_rate);
>> +
>> +static unsigned int snd_pcm_rate_mask_sanitize(unsigned int rates)
>> +{
>> + if (rates & SNDRV_PCM_RATE_CONTINUOUS)
>> + return SNDRV_PCM_RATE_CONTINUOUS;
>> + else if (rates & SNDRV_PCM_RATE_KNOT)
>> + return SNDRV_PCM_RATE_KNOT;
>> + return rates;
>> +}
>> +
>> +/**
>> + * snd_pcm_rate_mask_intersect - computes the intersection between two rate masks
>> + * @rates_a: The first rate mask
>> + * @rates_b: The second rate mask
>> + *
>> + * This function computes the rates that are supported by both rate masks passed
>> + * to the function. It will take care of the special handling of
>> + * SNDRV_PCM_RATE_CONTINUOUS and SNDRV_PCM_RATE_KNOT.
>> + *
>> + * Return: A rate mask containing the rates that are supported by both rates_a
>> + * and rates_b.
>> + */
>> +unsigned int snd_pcm_rate_mask_intersect(unsigned int rates_a,
>> + unsigned int rates_b)
>> +{
>> + rates_a = snd_pcm_rate_mask_sanitize(rates_a);
>> + rates_b = snd_pcm_rate_mask_sanitize(rates_b);
>> +
>> + if (rates_a & SNDRV_PCM_RATE_CONTINUOUS)
>> + return rates_b;
>> + else if (rates_b & SNDRV_PCM_RATE_CONTINUOUS)
>> + return rates_a;
>> + else if (rates_a & SNDRV_PCM_RATE_KNOT)
>> + return rates_b;
>> + else if (rates_b & SNDRV_PCM_RATE_KNOT)
>> + return rates_a;
>> + return rates_a & rates_b;
>> +}
>> +EXPORT_SYMBOL(snd_pcm_rate_mask_intersect);
>
> We can use EXPORT_SYMBOL_GPL() for new functions safely.
Ok, I'll change that.
>
> I suppose this patchset will go through ASoC tree? Then take my ack:
>
> Reviewed-by: Takashi Iwai <tiwai@suse.de>
Thanks.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2014-01-10 15:48 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-01-10 15:06 [PATCH 1/5] ASoC: pcm: Properly initialize hw->rate_max Lars-Peter Clausen
2014-01-10 15:06 ` [PATCH 2/5] ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates Lars-Peter Clausen
2014-01-10 15:06 ` [PATCH 3/5] ASoC: s6000: " Lars-Peter Clausen
2014-01-10 15:06 ` [PATCH 4/5] ALSA: Add helper function for intersecting two rate masks Lars-Peter Clausen
2014-01-10 15:17 ` Takashi Iwai
2014-01-10 15:49 ` Lars-Peter Clausen
2014-01-10 15:06 ` [PATCH 5/5] ASoC: pcm: Use snd_pcm_rate_mask_intersect() helper Lars-Peter Clausen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.