[PATCHv9 1/2] video: backlight: gpio-backlight: Add DT support.

[PATCHv9 1/2] video: backlight: gpio-backlight: Add DT support.

[Denis Carikli]

Cc: Richard Purdie <rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org>
Cc: Jingoo Han <jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Cc: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
Cc: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
ChangeLog v8->v9:
- Added Shawn Guo in the Cc list.
- The default-brightness-level is now a boolean default-on property,
  the gpio is only touched if the gpio-backlight driver instance probes.
- The code and documentation was updated accordingly.

ChangeLog v7->v8:
- The default-state was renamed to default-brightness-level.
- default-brightness-level is now mandatory, like for backlight-pwm,
  That way we avoid having to handle the case where it's not set,
  which means that we would need not to set the gpio, but still
  report a brightness value for sysfs, when not all gpio controllers are
  able to read the gpio value.
- switched the default-brightness-level to boolean values (0 or 1) instead
  of using strings ("on", "off", "keep").
- The documentation was updated accordingly.
- The example in the documentation now uses the dts gpio defines.
- The "backlight: gpio_backlight: Use a default state enum." patch was then
  dropped, becuase it is not necessary anymore.

ChangeLog v6->v7:
- removed a compilation warning with the removal of the useless ret declaration.

ChangeLog v5->v6:
- The default state handling was reworked:
  - it's now called default-state, and looks like the gpio-leds default-state.
  - it now has a "keep" option, like for the gpio-leds.
  - that "keep" option is the default when the default-state property is not set.
- The documentation was updated accordingly.

ChangeLog v4->v5:
- The default-brightness property now defaults to 0 in the driver.
- def_value int becomes a bool.
- The check for the gpio validity has been reworked.
---
 .../bindings/video/backlight/gpio-backlight.txt    |   19 +++++++
 drivers/video/backlight/gpio_backlight.c           |   60 +++++++++++++++++---
 2 files changed, 72 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt

diff --git a/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt b/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt
new file mode 100644
index 0000000..a923193
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt
@@ -0,0 +1,19 @@
+gpio-backlight bindings
+
+Required properties:
+  - compatible: "gpio-backlight"
+  - gpios: describes the gpio that is used for enabling/disabling the backlight
+    (see GPIO binding[0] for more details).
+
+Optional properties:
+  - default-on: enable the backlight at boot.
+
+[0]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+
+	backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c
index 81fb127..05f84f1 100644
--- a/drivers/video/backlight/gpio_backlight.c
+++ b/drivers/video/backlight/gpio_backlight.c
@@ -13,6 +13,8 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/platform_data/gpio_backlight.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -23,6 +25,7 @@ struct gpio_backlight {
 
 	int gpio;
 	int active;
+	int def_value;
 };
 
 static int gpio_backlight_update_status(struct backlight_device *bl)
@@ -60,6 +63,33 @@ static const struct backlight_ops gpio_backlight_ops = {
 	.check_fb	= gpio_backlight_check_fb,
 };
 
+static int gpio_backlight_probe_dt(struct platform_device *pdev,
+				   struct gpio_backlight *gbl)
+{
+	struct device_node *np = pdev->dev.of_node;
+	enum of_gpio_flags gpio_flags;
+	bool default_on = false;
+
+	gbl->fbdev = NULL;
+	gbl->gpio = of_get_gpio_flags(np, 0, &gpio_flags);
+
+	if (!gpio_is_valid(gbl->gpio)) {
+		if (gbl->gpio != -EPROBE_DEFER) {
+			dev_err(&pdev->dev,
+				"Error: The gpios parameter is missing or invalid.\n");
+		}
+		return gbl->gpio;
+	}
+
+	gbl->active = (gpio_flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1;
+
+	default_on = of_property_read_bool(np, "default-on");
+
+	gbl->def_value = default_on;
+
+	return 0;
+}
+
 static int gpio_backlight_probe(struct platform_device *pdev)
 {
 	struct gpio_backlight_platform_data *pdata =
@@ -67,10 +97,12 @@ static int gpio_backlight_probe(struct platform_device *pdev)
 	struct backlight_properties props;
 	struct backlight_device *bl;
 	struct gpio_backlight *gbl;
+	struct device_node *np = pdev->dev.of_node;
 	int ret;
 
-	if (!pdata) {
-		dev_err(&pdev->dev, "failed to find platform data\n");
+	if (!pdata && !np) {
+		dev_err(&pdev->dev,
+			"failed to find platform data or device tree node.\n");
 		return -ENODEV;
 	}
 
@@ -79,14 +111,22 @@ static int gpio_backlight_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	gbl->dev = &pdev->dev;
-	gbl->fbdev = pdata->fbdev;
-	gbl->gpio = pdata->gpio;
-	gbl->active = pdata->active_low ? 0 : 1;
+
+	if (np) {
+		ret = gpio_backlight_probe_dt(pdev, gbl);
+		if (ret)
+			return ret;
+	} else {
+		gbl->fbdev = pdata->fbdev;
+		gbl->gpio = pdata->gpio;
+		gbl->active = pdata->active_low ? 0 : 1;
+		gbl->def_value = pdata->def_value;
+	}
 
 	ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT |
 				    (gbl->active ? GPIOF_INIT_LOW
 						 : GPIOF_INIT_HIGH),
-				    pdata->name);
+				    pdata ? pdata->name : "backlight");
 	if (ret < 0) {
 		dev_err(&pdev->dev, "unable to request GPIO\n");
 		return ret;
@@ -103,17 +143,23 @@ static int gpio_backlight_probe(struct platform_device *pdev)
 		return PTR_ERR(bl);
 	}
 
-	bl->props.brightness = pdata->def_value;
+	bl->props.brightness = gbl->def_value;
 	backlight_update_status(bl);
 
 	platform_set_drvdata(pdev, bl);
 	return 0;
 }
 
+static struct of_device_id gpio_backlight_of_match[] = {
+	{ .compatible = "gpio-backlight" },
+	{ /* sentinel */ }
+};
+
 static struct platform_driver gpio_backlight_driver = {
 	.driver		= {
 		.name		= "gpio-backlight",
 		.owner		= THIS_MODULE,
+		.of_match_table = of_match_ptr(gpio_backlight_of_match),
 	},
 	.probe		= gpio_backlight_probe,
 };
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv9 1/2] video: backlight: gpio-backlight: Add DT support.

[Denis Carikli]

Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree at vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Lothar Wa?mann <LW@KARO-electronics.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v8->v9:
- Added Shawn Guo in the Cc list.
- The default-brightness-level is now a boolean default-on property,
  the gpio is only touched if the gpio-backlight driver instance probes.
- The code and documentation was updated accordingly.

ChangeLog v7->v8:
- The default-state was renamed to default-brightness-level.
- default-brightness-level is now mandatory, like for backlight-pwm,
  That way we avoid having to handle the case where it's not set,
  which means that we would need not to set the gpio, but still
  report a brightness value for sysfs, when not all gpio controllers are
  able to read the gpio value.
- switched the default-brightness-level to boolean values (0 or 1) instead
  of using strings ("on", "off", "keep").
- The documentation was updated accordingly.
- The example in the documentation now uses the dts gpio defines.
- The "backlight: gpio_backlight: Use a default state enum." patch was then
  dropped, becuase it is not necessary anymore.

ChangeLog v6->v7:
- removed a compilation warning with the removal of the useless ret declaration.

ChangeLog v5->v6:
- The default state handling was reworked:
  - it's now called default-state, and looks like the gpio-leds default-state.
  - it now has a "keep" option, like for the gpio-leds.
  - that "keep" option is the default when the default-state property is not set.
- The documentation was updated accordingly.

ChangeLog v4->v5:
- The default-brightness property now defaults to 0 in the driver.
- def_value int becomes a bool.
- The check for the gpio validity has been reworked.
---
 .../bindings/video/backlight/gpio-backlight.txt    |   19 +++++++
 drivers/video/backlight/gpio_backlight.c           |   60 +++++++++++++++++---
 2 files changed, 72 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt

diff --git a/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt b/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt
new file mode 100644
index 0000000..a923193
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt
@@ -0,0 +1,19 @@
+gpio-backlight bindings
+
+Required properties:
+  - compatible: "gpio-backlight"
+  - gpios: describes the gpio that is used for enabling/disabling the backlight
+    (see GPIO binding[0] for more details).
+
+Optional properties:
+  - default-on: enable the backlight at boot.
+
+[0]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+
+	backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c
index 81fb127..05f84f1 100644
--- a/drivers/video/backlight/gpio_backlight.c
+++ b/drivers/video/backlight/gpio_backlight.c
@@ -13,6 +13,8 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/platform_data/gpio_backlight.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -23,6 +25,7 @@ struct gpio_backlight {
 
 	int gpio;
 	int active;
+	int def_value;
 };
 
 static int gpio_backlight_update_status(struct backlight_device *bl)
@@ -60,6 +63,33 @@ static const struct backlight_ops gpio_backlight_ops = {
 	.check_fb	= gpio_backlight_check_fb,
 };
 
+static int gpio_backlight_probe_dt(struct platform_device *pdev,
+				   struct gpio_backlight *gbl)
+{
+	struct device_node *np = pdev->dev.of_node;
+	enum of_gpio_flags gpio_flags;
+	bool default_on = false;
+
+	gbl->fbdev = NULL;
+	gbl->gpio = of_get_gpio_flags(np, 0, &gpio_flags);
+
+	if (!gpio_is_valid(gbl->gpio)) {
+		if (gbl->gpio != -EPROBE_DEFER) {
+			dev_err(&pdev->dev,
+				"Error: The gpios parameter is missing or invalid.\n");
+		}
+		return gbl->gpio;
+	}
+
+	gbl->active = (gpio_flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1;
+
+	default_on = of_property_read_bool(np, "default-on");
+
+	gbl->def_value = default_on;
+
+	return 0;
+}
+
 static int gpio_backlight_probe(struct platform_device *pdev)
 {
 	struct gpio_backlight_platform_data *pdata =
@@ -67,10 +97,12 @@ static int gpio_backlight_probe(struct platform_device *pdev)
 	struct backlight_properties props;
 	struct backlight_device *bl;
 	struct gpio_backlight *gbl;
+	struct device_node *np = pdev->dev.of_node;
 	int ret;
 
-	if (!pdata) {
-		dev_err(&pdev->dev, "failed to find platform data\n");
+	if (!pdata && !np) {
+		dev_err(&pdev->dev,
+			"failed to find platform data or device tree node.\n");
 		return -ENODEV;
 	}
 
@@ -79,14 +111,22 @@ static int gpio_backlight_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	gbl->dev = &pdev->dev;
-	gbl->fbdev = pdata->fbdev;
-	gbl->gpio = pdata->gpio;
-	gbl->active = pdata->active_low ? 0 : 1;
+
+	if (np) {
+		ret = gpio_backlight_probe_dt(pdev, gbl);
+		if (ret)
+			return ret;
+	} else {
+		gbl->fbdev = pdata->fbdev;
+		gbl->gpio = pdata->gpio;
+		gbl->active = pdata->active_low ? 0 : 1;
+		gbl->def_value = pdata->def_value;
+	}
 
 	ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT |
 				    (gbl->active ? GPIOF_INIT_LOW
 						 : GPIOF_INIT_HIGH),
-				    pdata->name);
+				    pdata ? pdata->name : "backlight");
 	if (ret < 0) {
 		dev_err(&pdev->dev, "unable to request GPIO\n");
 		return ret;
@@ -103,17 +143,23 @@ static int gpio_backlight_probe(struct platform_device *pdev)
 		return PTR_ERR(bl);
 	}
 
-	bl->props.brightness = pdata->def_value;
+	bl->props.brightness = gbl->def_value;
 	backlight_update_status(bl);
 
 	platform_set_drvdata(pdev, bl);
 	return 0;
 }
 
+static struct of_device_id gpio_backlight_of_match[] = {
+	{ .compatible = "gpio-backlight" },
+	{ /* sentinel */ }
+};
+
 static struct platform_driver gpio_backlight_driver = {
 	.driver		= {
 		.name		= "gpio-backlight",
 		.owner		= THIS_MODULE,
+		.of_match_table = of_match_ptr(gpio_backlight_of_match),
 	},
 	.probe		= gpio_backlight_probe,
 };
-- 
1.7.9.5

[PATCHv9 2/2] ARM: imx_v6_v7_defconfig: Enable backlight gpio support.

[Denis Carikli]

The eukrea mbimxsd51 has a gpio backlight for its
  LCD display, so we turn that driver on.

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
Changelog:
- This patch has been splitted out of my imx-drm v5 patchset:
  http://lists.freedesktop.org/archives/dri-devel/2013-December/050124.html
  which will be resubmitted later without that patch.

- This patch is unchanged since the imx-drm v5 patchset,
  where it was first introduced.
---
 arch/arm/configs/imx_v6_v7_defconfig |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 00746d5..f2b2911 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -188,6 +188,7 @@ CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_GPIO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv9 2/2] ARM: imx_v6_v7_defconfig: Enable backlight gpio support.

[Denis Carikli]

The eukrea mbimxsd51 has a gpio backlight for its
  LCD display, so we turn that driver on.

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
Changelog:
- This patch has been splitted out of my imx-drm v5 patchset:
  http://lists.freedesktop.org/archives/dri-devel/2013-December/050124.html
  which will be resubmitted later without that patch.

- This patch is unchanged since the imx-drm v5 patchset,
  where it was first introduced.
---
 arch/arm/configs/imx_v6_v7_defconfig |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 00746d5..f2b2911 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -188,6 +188,7 @@ CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_GPIO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
-- 
1.7.9.5

Re: [PATCHv9 1/2] video: backlight: gpio-backlight: Add DT support.

[Lothar Waßmann]

Hi,

Denis Carikli wrote:
> Cc: Richard Purdie <rpurdie@rpsys.net>
> Cc: Jingoo Han <jg1.han@samsung.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: devicetree@vger.kernel.org
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Shawn Guo <shawn.guo@linaro.org>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Lothar Waßmann <LW@KARO-electronics.de>
> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Eric Bénard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> ---
> ChangeLog v8->v9:
> - Added Shawn Guo in the Cc list.
> - The default-brightness-level is now a boolean default-on property,
>   the gpio is only touched if the gpio-backlight driver instance probes.
> - The code and documentation was updated accordingly.
> 
> ChangeLog v7->v8:
> - The default-state was renamed to default-brightness-level.
> - default-brightness-level is now mandatory, like for backlight-pwm,
>   That way we avoid having to handle the case where it's not set,
>   which means that we would need not to set the gpio, but still
>   report a brightness value for sysfs, when not all gpio controllers are
>   able to read the gpio value.
> - switched the default-brightness-level to boolean values (0 or 1) instead
>   of using strings ("on", "off", "keep").
> - The documentation was updated accordingly.
> - The example in the documentation now uses the dts gpio defines.
> - The "backlight: gpio_backlight: Use a default state enum." patch was then
>   dropped, becuase it is not necessary anymore.
> 
> ChangeLog v6->v7:
> - removed a compilation warning with the removal of the useless ret declaration.
> 
> ChangeLog v5->v6:
> - The default state handling was reworked:
>   - it's now called default-state, and looks like the gpio-leds default-state.
>   - it now has a "keep" option, like for the gpio-leds.
>   - that "keep" option is the default when the default-state property is not set.
> - The documentation was updated accordingly.
> 
> ChangeLog v4->v5:
> - The default-brightness property now defaults to 0 in the driver.
> - def_value int becomes a bool.
> - The check for the gpio validity has been reworked.
> ---
>  .../bindings/video/backlight/gpio-backlight.txt    |   19 +++++++
>  drivers/video/backlight/gpio_backlight.c           |   60 +++++++++++++++++---
>  2 files changed, 72 insertions(+), 7 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt
> 
[...]
> +static struct of_device_id gpio_backlight_of_match[] = {
> +	{ .compatible = "gpio-backlight" },
> +	{ /* sentinel */ }
> +};
> +
>  static struct platform_driver gpio_backlight_driver = {
>  	.driver		= {
>  		.name		= "gpio-backlight",
>  		.owner		= THIS_MODULE,
> +		.of_match_table = of_match_ptr(gpio_backlight_of_match),
>
useless use of of_match_ptr().
This would make sense, if the gpio_backlight_of_match struct was
conditionally compiled in depending on CONFIG_OF.
Since you unconditionally provide it you can use
&gpio_backlight_of_match directly.


Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info@karo-electronics.de
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv9 1/2] video: backlight: gpio-backlight: Add DT support.

[Lothar Waßmann]

Hi,

Denis Carikli wrote:
> Cc: Richard Purdie <rpurdie@rpsys.net>
> Cc: Jingoo Han <jg1.han@samsung.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: devicetree at vger.kernel.org
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Shawn Guo <shawn.guo@linaro.org>
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: Lothar Wa?mann <LW@KARO-electronics.de>
> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Eric B?nard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> ---
> ChangeLog v8->v9:
> - Added Shawn Guo in the Cc list.
> - The default-brightness-level is now a boolean default-on property,
>   the gpio is only touched if the gpio-backlight driver instance probes.
> - The code and documentation was updated accordingly.
> 
> ChangeLog v7->v8:
> - The default-state was renamed to default-brightness-level.
> - default-brightness-level is now mandatory, like for backlight-pwm,
>   That way we avoid having to handle the case where it's not set,
>   which means that we would need not to set the gpio, but still
>   report a brightness value for sysfs, when not all gpio controllers are
>   able to read the gpio value.
> - switched the default-brightness-level to boolean values (0 or 1) instead
>   of using strings ("on", "off", "keep").
> - The documentation was updated accordingly.
> - The example in the documentation now uses the dts gpio defines.
> - The "backlight: gpio_backlight: Use a default state enum." patch was then
>   dropped, becuase it is not necessary anymore.
> 
> ChangeLog v6->v7:
> - removed a compilation warning with the removal of the useless ret declaration.
> 
> ChangeLog v5->v6:
> - The default state handling was reworked:
>   - it's now called default-state, and looks like the gpio-leds default-state.
>   - it now has a "keep" option, like for the gpio-leds.
>   - that "keep" option is the default when the default-state property is not set.
> - The documentation was updated accordingly.
> 
> ChangeLog v4->v5:
> - The default-brightness property now defaults to 0 in the driver.
> - def_value int becomes a bool.
> - The check for the gpio validity has been reworked.
> ---
>  .../bindings/video/backlight/gpio-backlight.txt    |   19 +++++++
>  drivers/video/backlight/gpio_backlight.c           |   60 +++++++++++++++++---
>  2 files changed, 72 insertions(+), 7 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt
> 
[...]
> +static struct of_device_id gpio_backlight_of_match[] = {
> +	{ .compatible = "gpio-backlight" },
> +	{ /* sentinel */ }
> +};
> +
>  static struct platform_driver gpio_backlight_driver = {
>  	.driver		= {
>  		.name		= "gpio-backlight",
>  		.owner		= THIS_MODULE,
> +		.of_match_table = of_match_ptr(gpio_backlight_of_match),
>
useless use of of_match_ptr().
This would make sense, if the gpio_backlight_of_match struct was
conditionally compiled in depending on CONFIG_OF.
Since you unconditionally provide it you can use
&gpio_backlight_of_match directly.


Lothar Wa?mann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Gesch?ftsf?hrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________

Re: [PATCHv9 2/2] ARM: imx_v6_v7_defconfig: Enable backlight gpio support.

[Shawn Guo]

On Fri, Jan 10, 2014 at 04:07:24PM +0100, Denis Carikli wrote:
> The eukrea mbimxsd51 has a gpio backlight for its
>   LCD display, so we turn that driver on.
> 
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Shawn Guo <shawn.guo@linaro.org>
> Cc: Eric Bénard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>

Applied this one, thanks.

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv9 2/2] ARM: imx_v6_v7_defconfig: Enable backlight gpio support.

[Shawn Guo]

On Fri, Jan 10, 2014 at 04:07:24PM +0100, Denis Carikli wrote:
> The eukrea mbimxsd51 has a gpio backlight for its
>   LCD display, so we turn that driver on.
> 
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Shawn Guo <shawn.guo@linaro.org>
> Cc: Eric B?nard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>

Applied this one, thanks.