Remove orphan kconfig symbols

Remove orphan kconfig symbols

[Richard Weinberger]

While playing with the kconfig parser I noticed some orphan symbols. 
This patch series removes them as they are a nop.

Subsystem maintainers, please review carefully maybe some symbols are 
left overs of a rename commit and need a rename instead of removing them...
This series was mostly autogenerated.

All patches can also be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc.git orphan-kconfig

[PATCH 01/28] Remove CPU_MMP3
[PATCH 02/28] Remove OF_I2C
[PATCH 03/28] Remove MACH_BCM2708
[PATCH 04/28] Remove EXYNOS_DEV_SYSMMU
[PATCH 05/28] Remove MPILIB_EXTRA
[PATCH 06/28] Remove PICOXCELL_PC3X3
[PATCH 07/28] Remove CPU_PXA988
[PATCH 08/28] Remove SYS_HAS_DMA_OPS
[PATCH 09/28] Remove ATHEROS_AR231X
[PATCH 10/28] Remove SH_MOBILE
[PATCH 11/28] Remove ARCH_SUPPORTS_MSI
[PATCH 12/28] Remove GENERIC_TIME
[PATCH 13/28] Remove S3C24XX_GPIO_EXTRA64
[PATCH 14/28] Remove MACH_SMDKC210
[PATCH 15/28] Remove TI_AEMIF
[PATCH 16/28] Remove GENERIC_HAS_IOMAP
[PATCH 17/28] Remove USE_GENERIC_SMP_HELPERS
[PATCH 18/28] Remove MN10300_PROC_MN2WS0038
[PATCH 19/28] Remove SI4713
[PATCH 20/28] Remove OMAP_PM_SRF
[PATCH 21/28] Remove CPU_SUBTYPE_SH7764
[PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128
[PATCH 23/28] Remove MACH_OMAP_H4_OTG
[PATCH 24/28] Remove DEPRECATED
[PATCH 25/28] Remove MACH_SMDKV310
[PATCH 26/28] Remove LOCAL_TIMERS
[PATCH 27/28] Remove ARC_HAS_COH_RTSC
[PATCH 28/28] Remove LOCAL_TIMERS

Thanks,
//richard

Cc: linux-kernel@vger.kernel.org

[PATCH 01/28] Remove CPU_MMP3

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/usb/phy/Kconfig      | 1 -
 drivers/video/mmp/Kconfig    | 2 +-
 drivers/video/mmp/hw/Kconfig | 2 +-
 3 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 7d1451d..b9b1c52 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -61,7 +61,6 @@ config KEYSTONE_USB_PHY
 
 config MV_U3D_PHY
 	bool "Marvell USB 3.0 PHY controller Driver"
-	depends on CPU_MMP3
 	select USB_PHY
 	help
 	  Enable this to support Marvell USB 3.0 phy controller for Marvell
diff --git a/drivers/video/mmp/Kconfig b/drivers/video/mmp/Kconfig
index e9ea39e..969925d 100644
--- a/drivers/video/mmp/Kconfig
+++ b/drivers/video/mmp/Kconfig
@@ -1,6 +1,6 @@
 menuconfig MMP_DISP
         tristate "Marvell MMP Display Subsystem support"
-        depends on CPU_PXA910 || CPU_MMP2 || CPU_MMP3 || CPU_PXA988
+        depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
         help
 	  Marvell Display Subsystem support.
 
diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
index 02f109a..57b03e2 100644
--- a/drivers/video/mmp/hw/Kconfig
+++ b/drivers/video/mmp/hw/Kconfig
@@ -2,7 +2,7 @@ if MMP_DISP
 
 config MMP_DISP_CONTROLLER
 	bool "mmp display controller hw support"
-	depends on CPU_PXA910 || CPU_MMP2 || CPU_MMP3 || CPU_PXA988
+	depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
 	default n
 	help
 		Marvell MMP display hw controller support
-- 
1.8.4.2

[PATCH 01/28] Remove CPU_MMP3

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/usb/phy/Kconfig      | 1 -
 drivers/video/mmp/Kconfig    | 2 +-
 drivers/video/mmp/hw/Kconfig | 2 +-
 3 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 7d1451d..b9b1c52 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -61,7 +61,6 @@ config KEYSTONE_USB_PHY
 
 config MV_U3D_PHY
 	bool "Marvell USB 3.0 PHY controller Driver"
-	depends on CPU_MMP3
 	select USB_PHY
 	help
 	  Enable this to support Marvell USB 3.0 phy controller for Marvell
diff --git a/drivers/video/mmp/Kconfig b/drivers/video/mmp/Kconfig
index e9ea39e..969925d 100644
--- a/drivers/video/mmp/Kconfig
+++ b/drivers/video/mmp/Kconfig
@@ -1,6 +1,6 @@
 menuconfig MMP_DISP
         tristate "Marvell MMP Display Subsystem support"
-        depends on CPU_PXA910 || CPU_MMP2 || CPU_MMP3 || CPU_PXA988
+        depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
         help
 	  Marvell Display Subsystem support.
 
diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
index 02f109a..57b03e2 100644
--- a/drivers/video/mmp/hw/Kconfig
+++ b/drivers/video/mmp/hw/Kconfig
@@ -2,7 +2,7 @@ if MMP_DISP
 
 config MMP_DISP_CONTROLLER
 	bool "mmp display controller hw support"
-	depends on CPU_PXA910 || CPU_MMP2 || CPU_MMP3 || CPU_PXA988
+	depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
 	default n
 	help
 		Marvell MMP display hw controller support
-- 
1.8.4.2

Re: [PATCH 01/28] Remove CPU_MMP3

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

This symbol first popped up as a dependency in v3.6, through commit
3d4eb9dfa3e8 ("usb: gadget: mv: Add USB 3.0 device driver for Marvell
PXA2128 chip."). The Kconfig symbol itself was never added.

> diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
> index 02f109a..57b03e2 100644
> --- a/drivers/video/mmp/hw/Kconfig
> +++ b/drivers/video/mmp/hw/Kconfig
> @@ -2,7 +2,7 @@ if MMP_DISP
>  
>  config MMP_DISP_CONTROLLER
>  	bool "mmp display controller hw support"
> -	depends on CPU_PXA910 || CPU_MMP2 || CPU_MMP3 || CPU_PXA988
> +	depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
>  	default n
>  	help
>  		Marvell MMP display hw controller support

You should remove the reference to MMP3 in the help text (not displayed
here) too, I'd guess. Aside from that:
    Acked-by: Paul Bolle <pebolle@tiscali.nl>


Paul Bolle

Re: [PATCH 01/28] Remove CPU_MMP3

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

This symbol first popped up as a dependency in v3.6, through commit
3d4eb9dfa3e8 ("usb: gadget: mv: Add USB 3.0 device driver for Marvell
PXA2128 chip."). The Kconfig symbol itself was never added.

> diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
> index 02f109a..57b03e2 100644
> --- a/drivers/video/mmp/hw/Kconfig
> +++ b/drivers/video/mmp/hw/Kconfig
> @@ -2,7 +2,7 @@ if MMP_DISP
>  
>  config MMP_DISP_CONTROLLER
>  	bool "mmp display controller hw support"
> -	depends on CPU_PXA910 || CPU_MMP2 || CPU_MMP3 || CPU_PXA988
> +	depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
>  	default n
>  	help
>  		Marvell MMP display hw controller support

You should remove the reference to MMP3 in the help text (not displayed
here) too, I'd guess. Aside from that:
    Acked-by: Paul Bolle <pebolle@tiscali.nl>


Paul Bolle

Re: [PATCH 01/28] Remove CPU_MMP3

[Greg Kroah-Hartman]

On Sun, Feb 09, 2014 at 07:47:39PM +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> Acked-by: Paul Bolle <pebolle@tiscali.nl>
> 
> ---
>  drivers/usb/phy/Kconfig      | 1 -
>  drivers/video/mmp/Kconfig    | 2 +-
>  drivers/video/mmp/hw/Kconfig | 2 +-
>  3 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index 7d1451d..b9b1c52 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -61,7 +61,6 @@ config KEYSTONE_USB_PHY
>  
>  config MV_U3D_PHY
>  	bool "Marvell USB 3.0 PHY controller Driver"
> -	depends on CPU_MMP3
>  	select USB_PHY
>  	help
>  	  Enable this to support Marvell USB 3.0 phy controller for Marvell

Do this and the driver breaks the build so it needs to depend on
something:

drivers/usb/phy/phy-mv-u3d-usb.c: In function ‘mv_u3d_phy_read’:
drivers/usb/phy/phy-mv-u3d-usb.c:42:2: error: implicit declaration of function ‘writel_relaxed’ [-Werror=implicit-function-declaration]

Sorry, I can't take this as-is.

greg k-h

Re: [PATCH 01/28] Remove CPU_MMP3

[Greg Kroah-Hartman]

On Sun, Feb 09, 2014 at 07:47:39PM +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> Acked-by: Paul Bolle <pebolle@tiscali.nl>
> 
> ---
>  drivers/usb/phy/Kconfig      | 1 -
>  drivers/video/mmp/Kconfig    | 2 +-
>  drivers/video/mmp/hw/Kconfig | 2 +-
>  3 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index 7d1451d..b9b1c52 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -61,7 +61,6 @@ config KEYSTONE_USB_PHY
>  
>  config MV_U3D_PHY
>  	bool "Marvell USB 3.0 PHY controller Driver"
> -	depends on CPU_MMP3
>  	select USB_PHY
>  	help
>  	  Enable this to support Marvell USB 3.0 phy controller for Marvell

Do this and the driver breaks the build so it needs to depend on
something:

drivers/usb/phy/phy-mv-u3d-usb.c: In function ‘mv_u3d_phy_read’:
drivers/usb/phy/phy-mv-u3d-usb.c:42:2: error: implicit declaration of function ‘writel_relaxed’ [-Werror=implicit-function-declaration]

Sorry, I can't take this as-is.

greg k-h

Re: [PATCH 01/28] Remove CPU_MMP3

[Paul Bolle]

On Tue, 2014-02-11 at 13:30 -0800, Greg Kroah-Hartman wrote:
> On Sun, Feb 09, 2014 at 07:47:39PM +0100, Richard Weinberger wrote:
> > The symbol is an orphan, get rid of it.
> > 
> > Signed-off-by: Richard Weinberger <richard@nod.at>
> > Acked-by: Paul Bolle <pebolle@tiscali.nl>
> > 
> > ---
> >  drivers/usb/phy/Kconfig      | 1 -
> >  drivers/video/mmp/Kconfig    | 2 +-
> >  drivers/video/mmp/hw/Kconfig | 2 +-
> >  3 files changed, 2 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> > index 7d1451d..b9b1c52 100644
> > --- a/drivers/usb/phy/Kconfig
> > +++ b/drivers/usb/phy/Kconfig
> > @@ -61,7 +61,6 @@ config KEYSTONE_USB_PHY
> >  
> >  config MV_U3D_PHY
> >  	bool "Marvell USB 3.0 PHY controller Driver"
> > -	depends on CPU_MMP3
> >  	select USB_PHY
> >  	help
> >  	  Enable this to support Marvell USB 3.0 phy controller for Marvell
> 
> Do this and the driver breaks the build so it needs to depend on
> something:
> 
> drivers/usb/phy/phy-mv-u3d-usb.c: In function ‘mv_u3d_phy_read’:
> drivers/usb/phy/phy-mv-u3d-usb.c:42:2: error: implicit declaration of function ‘writel_relaxed’ [-Werror=implicit-function-declaration]

This sort of proves that a driver that depends on an unknown Kconfig
symbol gets no build coverage (and will bit rot).

> Sorry, I can't take this as-is.

My mistake, I should have spotted this when looking a Richard's patch.

Some background (which I quickly dug up): config MV_U3D_PHY got added in
v3.7 through commit a67e76ac904c ("usb: phy: mv_u3d: Add usb phy driver
for mv_u3d"). It then depended on USB_MV_U3D. And that symbol depended
on CPU_MMP3 at that time. Ie, MV_U3D_PHY was unbuildable when it was
added.

In commit 60630c2eabd4 ("usb: gadget: mv_u3d: drop ARCH dependency")
MV_U3D_PHY was made depended directly on  CPU_MMP3. That kept it
unbuildable, of course.

Richard, assuming you agree with the above short history of MV_U3D_PHY,
would you mind sending a v2 that removes this unbuildable driver?


Paul Bolle

Re: [PATCH 01/28] Remove CPU_MMP3

[Paul Bolle]

On Tue, 2014-02-11 at 13:30 -0800, Greg Kroah-Hartman wrote:
> On Sun, Feb 09, 2014 at 07:47:39PM +0100, Richard Weinberger wrote:
> > The symbol is an orphan, get rid of it.
> > 
> > Signed-off-by: Richard Weinberger <richard@nod.at>
> > Acked-by: Paul Bolle <pebolle@tiscali.nl>
> > 
> > ---
> >  drivers/usb/phy/Kconfig      | 1 -
> >  drivers/video/mmp/Kconfig    | 2 +-
> >  drivers/video/mmp/hw/Kconfig | 2 +-
> >  3 files changed, 2 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> > index 7d1451d..b9b1c52 100644
> > --- a/drivers/usb/phy/Kconfig
> > +++ b/drivers/usb/phy/Kconfig
> > @@ -61,7 +61,6 @@ config KEYSTONE_USB_PHY
> >  
> >  config MV_U3D_PHY
> >  	bool "Marvell USB 3.0 PHY controller Driver"
> > -	depends on CPU_MMP3
> >  	select USB_PHY
> >  	help
> >  	  Enable this to support Marvell USB 3.0 phy controller for Marvell
> 
> Do this and the driver breaks the build so it needs to depend on
> something:
> 
> drivers/usb/phy/phy-mv-u3d-usb.c: In function ‘mv_u3d_phy_read’:
> drivers/usb/phy/phy-mv-u3d-usb.c:42:2: error: implicit declaration of function ‘writel_relaxed’ [-Werror=implicit-function-declaration]

This sort of proves that a driver that depends on an unknown Kconfig
symbol gets no build coverage (and will bit rot).

> Sorry, I can't take this as-is.

My mistake, I should have spotted this when looking a Richard's patch.

Some background (which I quickly dug up): config MV_U3D_PHY got added in
v3.7 through commit a67e76ac904c ("usb: phy: mv_u3d: Add usb phy driver
for mv_u3d"). It then depended on USB_MV_U3D. And that symbol depended
on CPU_MMP3 at that time. Ie, MV_U3D_PHY was unbuildable when it was
added.

In commit 60630c2eabd4 ("usb: gadget: mv_u3d: drop ARCH dependency")
MV_U3D_PHY was made depended directly on  CPU_MMP3. That kept it
unbuildable, of course.

Richard, assuming you agree with the above short history of MV_U3D_PHY,
would you mind sending a v2 that removes this unbuildable driver?


Paul Bolle

Re: [PATCH 01/28] Remove CPU_MMP3

[Geert Uytterhoeven]

Cc Yu Xu <yuxu@marvell.com>

On Tue, Feb 11, 2014 at 11:01 PM, Paul Bolle <pebolle@tiscali.nl> wrote:
> On Tue, 2014-02-11 at 13:30 -0800, Greg Kroah-Hartman wrote:
>> On Sun, Feb 09, 2014 at 07:47:39PM +0100, Richard Weinberger wrote:
>> > The symbol is an orphan, get rid of it.
>> >
>> > Signed-off-by: Richard Weinberger <richard@nod.at>
>> > Acked-by: Paul Bolle <pebolle@tiscali.nl>
>> >
>> > ---
>> >  drivers/usb/phy/Kconfig      | 1 -
>> >  drivers/video/mmp/Kconfig    | 2 +-
>> >  drivers/video/mmp/hw/Kconfig | 2 +-
>> >  3 files changed, 2 insertions(+), 3 deletions(-)
>> >
>> > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
>> > index 7d1451d..b9b1c52 100644
>> > --- a/drivers/usb/phy/Kconfig
>> > +++ b/drivers/usb/phy/Kconfig
>> > @@ -61,7 +61,6 @@ config KEYSTONE_USB_PHY
>> >
>> >  config MV_U3D_PHY
>> >     bool "Marvell USB 3.0 PHY controller Driver"
>> > -   depends on CPU_MMP3
>> >     select USB_PHY
>> >     help
>> >       Enable this to support Marvell USB 3.0 phy controller for Marvell
>>
>> Do this and the driver breaks the build so it needs to depend on
>> something:
>>
>> drivers/usb/phy/phy-mv-u3d-usb.c: In function ‘mv_u3d_phy_read’:
>> drivers/usb/phy/phy-mv-u3d-usb.c:42:2: error: implicit declaration of function ‘writel_relaxed’ [-Werror=implicit-function-declaration]
>
> This sort of proves that a driver that depends on an unknown Kconfig
> symbol gets no build coverage (and will bit rot).
>
>> Sorry, I can't take this as-is.
>
> My mistake, I should have spotted this when looking a Richard's patch.
>
> Some background (which I quickly dug up): config MV_U3D_PHY got added in
> v3.7 through commit a67e76ac904c ("usb: phy: mv_u3d: Add usb phy driver
> for mv_u3d"). It then depended on USB_MV_U3D. And that symbol depended
> on CPU_MMP3 at that time. Ie, MV_U3D_PHY was unbuildable when it was
> added.
>
> In commit 60630c2eabd4 ("usb: gadget: mv_u3d: drop ARCH dependency")
> MV_U3D_PHY was made depended directly on  CPU_MMP3. That kept it
> unbuildable, of course.
>
> Richard, assuming you agree with the above short history of MV_U3D_PHY,
> would you mind sending a v2 that removes this unbuildable driver?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 01/28] Remove CPU_MMP3

[Geert Uytterhoeven]

Cc Yu Xu <yuxu@marvell.com>

On Tue, Feb 11, 2014 at 11:01 PM, Paul Bolle <pebolle@tiscali.nl> wrote:
> On Tue, 2014-02-11 at 13:30 -0800, Greg Kroah-Hartman wrote:
>> On Sun, Feb 09, 2014 at 07:47:39PM +0100, Richard Weinberger wrote:
>> > The symbol is an orphan, get rid of it.
>> >
>> > Signed-off-by: Richard Weinberger <richard@nod.at>
>> > Acked-by: Paul Bolle <pebolle@tiscali.nl>
>> >
>> > ---
>> >  drivers/usb/phy/Kconfig      | 1 -
>> >  drivers/video/mmp/Kconfig    | 2 +-
>> >  drivers/video/mmp/hw/Kconfig | 2 +-
>> >  3 files changed, 2 insertions(+), 3 deletions(-)
>> >
>> > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
>> > index 7d1451d..b9b1c52 100644
>> > --- a/drivers/usb/phy/Kconfig
>> > +++ b/drivers/usb/phy/Kconfig
>> > @@ -61,7 +61,6 @@ config KEYSTONE_USB_PHY
>> >
>> >  config MV_U3D_PHY
>> >     bool "Marvell USB 3.0 PHY controller Driver"
>> > -   depends on CPU_MMP3
>> >     select USB_PHY
>> >     help
>> >       Enable this to support Marvell USB 3.0 phy controller for Marvell
>>
>> Do this and the driver breaks the build so it needs to depend on
>> something:
>>
>> drivers/usb/phy/phy-mv-u3d-usb.c: In function ‘mv_u3d_phy_read’:
>> drivers/usb/phy/phy-mv-u3d-usb.c:42:2: error: implicit declaration of function ‘writel_relaxed’ [-Werror=implicit-function-declaration]
>
> This sort of proves that a driver that depends on an unknown Kconfig
> symbol gets no build coverage (and will bit rot).
>
>> Sorry, I can't take this as-is.
>
> My mistake, I should have spotted this when looking a Richard's patch.
>
> Some background (which I quickly dug up): config MV_U3D_PHY got added in
> v3.7 through commit a67e76ac904c ("usb: phy: mv_u3d: Add usb phy driver
> for mv_u3d"). It then depended on USB_MV_U3D. And that symbol depended
> on CPU_MMP3 at that time. Ie, MV_U3D_PHY was unbuildable when it was
> added.
>
> In commit 60630c2eabd4 ("usb: gadget: mv_u3d: drop ARCH dependency")
> MV_U3D_PHY was made depended directly on  CPU_MMP3. That kept it
> unbuildable, of course.
>
> Richard, assuming you agree with the above short history of MV_U3D_PHY,
> would you mind sending a v2 that removes this unbuildable driver?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH 02/28] Remove OF_I2C

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/i2c/busses/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index f5ed031..de17c55 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -387,7 +387,7 @@ config I2C_CBUS_GPIO
 
 config I2C_CPM
 	tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
-	depends on (CPM1 || CPM2) && OF_I2C
+	depends on CPM1 || CPM2
 	help
 	  This supports the use of the I2C interface on Freescale
 	  processors with CPM1 or CPM2.
-- 
1.8.4.2

[PATCH 02/28] Remove OF_I2C

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/i2c/busses/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index f5ed031..de17c55 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -387,7 +387,7 @@ config I2C_CBUS_GPIO
 
 config I2C_CPM
 	tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
-	depends on (CPM1 || CPM2) && OF_I2C
+	depends on CPM1 || CPM2
 	help
 	  This supports the use of the I2C interface on Freescale
 	  processors with CPM1 or CPM2.
-- 
1.8.4.2

Re: [PATCH 02/28] Remove OF_I2C

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  drivers/i2c/busses/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index f5ed031..de17c55 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -387,7 +387,7 @@ config I2C_CBUS_GPIO
>  
>  config I2C_CPM
>  	tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
> -	depends on (CPM1 || CPM2) && OF_I2C
> +	depends on CPM1 || CPM2
>  	help
>  	  This supports the use of the I2C interface on Freescale
>  	  processors with CPM1 or CPM2.

This needs testing. Since when is OF_I2C orphaned? Ie, when was the last
time it was possible to set I2C_CPM?


Paul Bolle

Re: [PATCH 02/28] Remove OF_I2C

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 386 bytes --]

On Sun, Feb 09, 2014 at 07:47:40PM +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

BTW I updated the commit message to be more proper IMO (you didn't
actually remove the symbol, no?)

===

i2c: Remove usage of orphaned symbol OF_I2C

The symbol is an orphan, don't depend on it anymore.


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 02/28] Remove OF_I2C

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 408 bytes --]

On Sun, Feb 09, 2014 at 07:47:40PM +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard-/L3Ra7n9ekc@public.gmane.org>

BTW I updated the commit message to be more proper IMO (you didn't
actually remove the symbol, no?)

===

i2c: Remove usage of orphaned symbol OF_I2C

The symbol is an orphan, don't depend on it anymore.


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 03/28] Remove MACH_BCM2708

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/dma/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 9bed1a2..e4382ec 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -308,7 +308,7 @@ config DMA_OMAP
 
 config DMA_BCM2835
 	tristate "BCM2835 DMA engine support"
-	depends on (ARCH_BCM2835 || MACH_BCM2708)
+	depends on ARCH_BCM2835
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 
-- 
1.8.4.2

Re: [PATCH 03/28] Remove MACH_BCM2708

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  drivers/dma/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> index 9bed1a2..e4382ec 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -308,7 +308,7 @@ config DMA_OMAP
>  
>  config DMA_BCM2835
>  	tristate "BCM2835 DMA engine support"
> -	depends on (ARCH_BCM2835 || MACH_BCM2708)
> +	depends on ARCH_BCM2835
>  	select DMA_ENGINE
>  	select DMA_VIRTUAL_CHANNELS
>  

I sent an identical patch (with a more verbose explanation) a few hours
ago. But I'm fine with this one too.


Paul Bolle

[PATCH 04/28] Remove EXYNOS_DEV_SYSMMU

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/iommu/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 79bbc21..20d062d 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -178,7 +178,7 @@ config TEGRA_IOMMU_SMMU
 
 config EXYNOS_IOMMU
 	bool "Exynos IOMMU Support"
-	depends on ARCH_EXYNOS && EXYNOS_DEV_SYSMMU
+	depends on ARCH_EXYNOS
 	select IOMMU_API
 	help
 	  Support for the IOMMU(System MMU) of Samsung Exynos application
-- 
1.8.4.2

[PATCH 04/28] Remove EXYNOS_DEV_SYSMMU

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/iommu/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 79bbc21..20d062d 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -178,7 +178,7 @@ config TEGRA_IOMMU_SMMU
 
 config EXYNOS_IOMMU
 	bool "Exynos IOMMU Support"
-	depends on ARCH_EXYNOS && EXYNOS_DEV_SYSMMU
+	depends on ARCH_EXYNOS
 	select IOMMU_API
 	help
 	  Support for the IOMMU(System MMU) of Samsung Exynos application
-- 
1.8.4.2

Re: [PATCH 04/28] Remove EXYNOS_DEV_SYSMMU

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  drivers/iommu/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 79bbc21..20d062d 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -178,7 +178,7 @@ config TEGRA_IOMMU_SMMU
>  
>  config EXYNOS_IOMMU
>  	bool "Exynos IOMMU Support"
> -	depends on ARCH_EXYNOS && EXYNOS_DEV_SYSMMU
> +	depends on ARCH_EXYNOS
>  	select IOMMU_API
>  	help
>  	  Support for the IOMMU(System MMU) of Samsung Exynos application

I noted this one about a year ago (see
https://lkml.org/lkml/2013/3/5/401 ). By now I wonder whether
EXYNOS_IOMMU (and everything depending on it) shouldn't be removed. That
code has been unbuildable for at least a year now  (I have not checked
how much code is involved).


Paul Bolle

Re: [PATCH 04/28] Remove EXYNOS_DEV_SYSMMU

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard-/L3Ra7n9ekc@public.gmane.org>
> ---
>  drivers/iommu/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 79bbc21..20d062d 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -178,7 +178,7 @@ config TEGRA_IOMMU_SMMU
>  
>  config EXYNOS_IOMMU
>  	bool "Exynos IOMMU Support"
> -	depends on ARCH_EXYNOS && EXYNOS_DEV_SYSMMU
> +	depends on ARCH_EXYNOS
>  	select IOMMU_API
>  	help
>  	  Support for the IOMMU(System MMU) of Samsung Exynos application

I noted this one about a year ago (see
https://lkml.org/lkml/2013/3/5/401 ). By now I wonder whether
EXYNOS_IOMMU (and everything depending on it) shouldn't be removed. That
code has been unbuildable for at least a year now  (I have not checked
how much code is involved).


Paul Bolle

Re: [PATCH 04/28] Remove EXYNOS_DEV_SYSMMU

[Sachin Kamat]

+cc linux-samsung-soc list

On 10 February 2014 01:38, Paul Bolle <pebolle@tiscali.nl> wrote:
> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
>> The symbol is an orphan, get rid of it.
>>
>> Signed-off-by: Richard Weinberger <richard@nod.at>
>> ---
>>  drivers/iommu/Kconfig | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
>> index 79bbc21..20d062d 100644
>> --- a/drivers/iommu/Kconfig
>> +++ b/drivers/iommu/Kconfig
>> @@ -178,7 +178,7 @@ config TEGRA_IOMMU_SMMU
>>
>>  config EXYNOS_IOMMU
>>       bool "Exynos IOMMU Support"
>> -     depends on ARCH_EXYNOS && EXYNOS_DEV_SYSMMU
>> +     depends on ARCH_EXYNOS
>>       select IOMMU_API
>>       help
>>         Support for the IOMMU(System MMU) of Samsung Exynos application
>
> I noted this one about a year ago (see
> https://lkml.org/lkml/2013/3/5/401 ). By now I wonder whether
> EXYNOS_IOMMU (and everything depending on it) shouldn't be removed. That
> code has been unbuildable for at least a year now  (I have not checked
> how much code is involved).


Please refer to some on-going discussion about it at [1].

[1] http://thread.gmane.org/gmane.linux.kernel.samsung-soc/26842

-- 
With warm regards,
Sachin

Re: [PATCH 04/28] Remove EXYNOS_DEV_SYSMMU

[Paul Bolle]

On Mon, 2014-02-10 at 10:02 +0530, Sachin Kamat wrote:
> +cc linux-samsung-soc list
> 
> On 10 February 2014 01:38, Paul Bolle <pebolle@tiscali.nl> wrote:
> > I noted this one about a year ago (see
> > https://lkml.org/lkml/2013/3/5/401 ). By now I wonder whether
> > EXYNOS_IOMMU (and everything depending on it) shouldn't be removed. That
> > code has been unbuildable for at least a year now  (I have not checked
> > how much code is involved).
> 
> 
> Please refer to some on-going discussion about it at [1].
> 
> [1] http://thread.gmane.org/gmane.linux.kernel.samsung-soc/26842

It's not clear to me whether an actual decision was eventually made.
Olof, does it make sense to rebase the patch (that Sachin linked to) on
onto v3.15-rc1 and resubmit?


Paul Bolle

[PATCH 05/28] Remove MPILIB_EXTRA

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 crypto/asymmetric_keys/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig
index 03a6eb9..0320c7d 100644
--- a/crypto/asymmetric_keys/Kconfig
+++ b/crypto/asymmetric_keys/Kconfig
@@ -22,7 +22,6 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE
 
 config PUBLIC_KEY_ALGO_RSA
 	tristate "RSA public-key algorithm"
-	select MPILIB_EXTRA
 	select MPILIB
 	help
 	  This option enables support for the RSA algorithm (PKCS#1, RFC3447).
-- 
1.8.4.2

Re: [PATCH 05/28] Remove MPILIB_EXTRA

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

Acked-by: Paul Bolle <pebolle@tiscali.nl>

> ---
>  crypto/asymmetric_keys/Kconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig
> index 03a6eb9..0320c7d 100644
> --- a/crypto/asymmetric_keys/Kconfig
> +++ b/crypto/asymmetric_keys/Kconfig
> @@ -22,7 +22,6 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE
>  
>  config PUBLIC_KEY_ALGO_RSA
>  	tristate "RSA public-key algorithm"
> -	select MPILIB_EXTRA
>  	select MPILIB
>  	help
>  	  This option enables support for the RSA algorithm (PKCS#1, RFC3447).

I tried this a year ago (see https://lkml.org/lkml/2013/3/8/142 ).


Paul Bolle

Re: [PATCH 05/28] Remove MPILIB_EXTRA

[Paul Bolle]

On Sun, 2014-02-09 at 21:18 +0100, Paul Bolle wrote:
> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> > The symbol is an orphan, get rid of it.
> > 
> > Signed-off-by: Richard Weinberger <richard@nod.at>
> 
> Acked-by: Paul Bolle <pebolle@tiscali.nl>
> 
> > ---
> >  crypto/asymmetric_keys/Kconfig | 1 -
> >  1 file changed, 1 deletion(-)
> > 
> > diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig
> > index 03a6eb9..0320c7d 100644
> > --- a/crypto/asymmetric_keys/Kconfig
> > +++ b/crypto/asymmetric_keys/Kconfig
> > @@ -22,7 +22,6 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE
> >  
> >  config PUBLIC_KEY_ALGO_RSA
> >  	tristate "RSA public-key algorithm"
> > -	select MPILIB_EXTRA
> >  	select MPILIB
> >  	help
> >  	  This option enables support for the RSA algorithm (PKCS#1, RFC3447).
> 
> I tried this a year ago (see https://lkml.org/lkml/2013/3/8/142 ).

Did anyone else ever find some time to look at this oneliner?


Paul Bolle

Re: [PATCH 05/28] Remove MPILIB_EXTRA

[Borislav Petkov]

On Tue, Apr 15, 2014 at 11:06:34AM +0200, Paul Bolle wrote:
> On Sun, 2014-02-09 at 21:18 +0100, Paul Bolle wrote:
> > On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> > > The symbol is an orphan, get rid of it.
> > > 
> > > Signed-off-by: Richard Weinberger <richard@nod.at>
> > 
> > Acked-by: Paul Bolle <pebolle@tiscali.nl>
> > 
> > > ---
> > >  crypto/asymmetric_keys/Kconfig | 1 -
> > >  1 file changed, 1 deletion(-)
> > > 
> > > diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig
> > > index 03a6eb9..0320c7d 100644
> > > --- a/crypto/asymmetric_keys/Kconfig
> > > +++ b/crypto/asymmetric_keys/Kconfig
> > > @@ -22,7 +22,6 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE
> > >  
> > >  config PUBLIC_KEY_ALGO_RSA
> > >  	tristate "RSA public-key algorithm"
> > > -	select MPILIB_EXTRA
> > >  	select MPILIB
> > >  	help
> > >  	  This option enables support for the RSA algorithm (PKCS#1, RFC3447).
> > 
> > I tried this a year ago (see https://lkml.org/lkml/2013/3/8/142 ).
> 
> Did anyone else ever find some time to look at this oneliner?

Last time I asked about that part of the tree, Herbert said it should go
through James Morris' tree. CCed.

http://lkml.kernel.org/r/20131112182746.GA22711@gondor.apana.org.au

Unless akpm picks it up first. Also CCed.

-- 
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--

Re: [PATCH 05/28] Remove MPILIB_EXTRA

[Paul Bolle]

On Tue, 2014-04-15 at 11:21 +0200, Borislav Petkov wrote:
> On Tue, Apr 15, 2014 at 11:06:34AM +0200, Paul Bolle wrote:
> > On Sun, 2014-02-09 at 21:18 +0100, Paul Bolle wrote:
> > > On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> > > > The symbol is an orphan, get rid of it.
> > > > 
> > > > Signed-off-by: Richard Weinberger <richard@nod.at>
> > > 
> > > Acked-by: Paul Bolle <pebolle@tiscali.nl>
> > > 
> > > > ---
> > > >  crypto/asymmetric_keys/Kconfig | 1 -
> > > >  1 file changed, 1 deletion(-)
> > > > 
> > > > diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig
> > > > index 03a6eb9..0320c7d 100644
> > > > --- a/crypto/asymmetric_keys/Kconfig
> > > > +++ b/crypto/asymmetric_keys/Kconfig
> > > > @@ -22,7 +22,6 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE
> > > >  
> > > >  config PUBLIC_KEY_ALGO_RSA
> > > >  	tristate "RSA public-key algorithm"
> > > > -	select MPILIB_EXTRA
> > > >  	select MPILIB
> > > >  	help
> > > >  	  This option enables support for the RSA algorithm (PKCS#1, RFC3447).
> > > 
> > > I tried this a year ago (see https://lkml.org/lkml/2013/3/8/142 ).
> > 
> > Did anyone else ever find some time to look at this oneliner?
> 
> Last time I asked about that part of the tree, Herbert said it should go
> through James Morris' tree. CCed.
> 
> http://lkml.kernel.org/r/20131112182746.GA22711@gondor.apana.org.au
> 
> Unless akpm picks it up first. Also CCed.

This oneliner is neither part of v3.16-rc1 nor part of linux-next. It
applies cleanly to next-20140618. Should I hope that Jiri Kosina wants
to take it for trivial (CC-ed)?


Paul Bolle

Re: [PATCH 05/28] Remove MPILIB_EXTRA

[Borislav Petkov]

On Wed, Jun 18, 2014 at 10:09:54AM +0200, Paul Bolle wrote:
> This oneliner is neither part of v3.16-rc1 nor part of linux-next. It
> applies cleanly to next-20140618. Should I hope that Jiri Kosina wants
> to take it for trivial (CC-ed)?

Yeah, he will.

-- 
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--

Re: [PATCH 05/28] Remove MPILIB_EXTRA

[Jiri Kosina]

On Wed, 18 Jun 2014, Borislav Petkov wrote:

> > This oneliner is neither part of v3.16-rc1 nor part of linux-next. It
> > applies cleanly to next-20140618. Should I hope that Jiri Kosina wants
> > to take it for trivial (CC-ed)?
> 
> Yeah, he will.

It's not in my queue of patches to be processed though, so I guess I 
wasn't CCed on the initial submission. Paul, if you want me to pick it up, 
please bounce it to trivial@kernel.org as well. Thanks,

-- 
Jiri Kosina
SUSE Labs

[PATCH] [TRIVIAL] Remove MPILIB_EXTRA

[Paul Bolle]

From: Richard Weinberger <richard@nod.at>

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
Bounced to trivial. Tested with make menuconfig and make oldconfig.
Since I'm sending this to Jiri myself I've upgraded my Acked-by to
Signed-off-by.

 crypto/asymmetric_keys/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig
index 03a6eb95ab50..0320c7d4b3e1 100644
--- a/crypto/asymmetric_keys/Kconfig
+++ b/crypto/asymmetric_keys/Kconfig
@@ -22,7 +22,6 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE
 
 config PUBLIC_KEY_ALGO_RSA
 	tristate "RSA public-key algorithm"
-	select MPILIB_EXTRA
 	select MPILIB
 	help
 	  This option enables support for the RSA algorithm (PKCS#1, RFC3447).
-- 
1.9.3

[PATCH 06/28] Remove PICOXCELL_PC3X3

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/char/hw_random/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 2f2b084..eab6056 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -253,7 +253,7 @@ config HW_RANDOM_NOMADIK
 
 config HW_RANDOM_PICOXCELL
 	tristate "Picochip picoXcell true random number generator support"
-	depends on HW_RANDOM && ARCH_PICOXCELL && PICOXCELL_PC3X3
+	depends on HW_RANDOM && ARCH_PICOXCELL
 	---help---
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Picochip PC3x3 and later devices.
-- 
1.8.4.2

Re: [PATCH 06/28] Remove PICOXCELL_PC3X3

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  drivers/char/hw_random/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> index 2f2b084..eab6056 100644
> --- a/drivers/char/hw_random/Kconfig
> +++ b/drivers/char/hw_random/Kconfig
> @@ -253,7 +253,7 @@ config HW_RANDOM_NOMADIK
>  
>  config HW_RANDOM_PICOXCELL
>  	tristate "Picochip picoXcell true random number generator support"
> -	depends on HW_RANDOM && ARCH_PICOXCELL && PICOXCELL_PC3X3
> +	depends on HW_RANDOM && ARCH_PICOXCELL
>  	---help---
>  	  This driver provides kernel-side support for the Random Number
>  	  Generator hardware found on Picochip PC3x3 and later devices.

So that random number generator is now unbuildable. For the record: this
was already an issue in May 2013:
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-May/168283.html . Perhaps the picoxcell-rng could be removed (an merged again if PICOXCELL_PC3X3 gets added).


Paul Bolle

[PATCH] hwrng: remove unbuildable picoxcell TRNG

[Paul Bolle]

The driver for the "Picochip picoXcell true random number generator" was
added in v2.6.39. Its Kconfig symbol has always depended on
PICOXCELL_PC3X3. But that Kconfig symbol has never been part of the
tree. This means this driver has never been buildable. Let's remove it.
It can be re-added if its dependencies are actually part of the tree.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
Tested only by grepping the tree!

 drivers/char/hw_random/Kconfig         |  12 ---
 drivers/char/hw_random/Makefile        |   1 -
 drivers/char/hw_random/picoxcell-rng.c | 181 ---------------------------------
 3 files changed, 194 deletions(-)
 delete mode 100644 drivers/char/hw_random/picoxcell-rng.c

diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 244759bbd7b7..d994c85a923c 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -251,18 +251,6 @@ config HW_RANDOM_NOMADIK
 
 	  If unsure, say Y.
 
-config HW_RANDOM_PICOXCELL
-	tristate "Picochip picoXcell true random number generator support"
-	depends on HW_RANDOM && ARCH_PICOXCELL && PICOXCELL_PC3X3
-	---help---
-	  This driver provides kernel-side support for the Random Number
-	  Generator hardware found on Picochip PC3x3 and later devices.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called picoxcell-rng.
-
-	  If unsure, say Y.
-
 config HW_RANDOM_PPC4XX
 	tristate "PowerPC 4xx generic true random number generator support"
 	depends on HW_RANDOM && PPC && 4xx
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 3ae7755a52e7..199ed283e149 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -22,7 +22,6 @@ obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
 obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
 obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
 obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o
-obj-$(CONFIG_HW_RANDOM_PICOXCELL) += picoxcell-rng.o
 obj-$(CONFIG_HW_RANDOM_PPC4XX) += ppc4xx-rng.o
 obj-$(CONFIG_HW_RANDOM_PSERIES) += pseries-rng.o
 obj-$(CONFIG_HW_RANDOM_POWERNV) += powernv-rng.o
diff --git a/drivers/char/hw_random/picoxcell-rng.c b/drivers/char/hw_random/picoxcell-rng.c
deleted file mode 100644
index eab5448ad56f..000000000000
--- a/drivers/char/hw_random/picoxcell-rng.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * All enquiries to support@picochip.com
- */
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/hw_random.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#define DATA_REG_OFFSET		0x0200
-#define CSR_REG_OFFSET		0x0278
-#define CSR_OUT_EMPTY_MASK	(1 << 24)
-#define CSR_FAULT_MASK		(1 << 1)
-#define TRNG_BLOCK_RESET_MASK	(1 << 0)
-#define TAI_REG_OFFSET		0x0380
-
-/*
- * The maximum amount of time in microseconds to spend waiting for data if the
- * core wants us to wait.  The TRNG should generate 32 bits every 320ns so a
- * timeout of 20us seems reasonable.  The TRNG does builtin tests of the data
- * for randomness so we can't always assume there is data present.
- */
-#define PICO_TRNG_TIMEOUT		20
-
-static void __iomem *rng_base;
-static struct clk *rng_clk;
-static struct device *rng_dev;
-
-static inline u32 picoxcell_trng_read_csr(void)
-{
-	return __raw_readl(rng_base + CSR_REG_OFFSET);
-}
-
-static inline bool picoxcell_trng_is_empty(void)
-{
-	return picoxcell_trng_read_csr() & CSR_OUT_EMPTY_MASK;
-}
-
-/*
- * Take the random number generator out of reset and make sure the interrupts
- * are masked. We shouldn't need to get large amounts of random bytes so just
- * poll the status register. The hardware generates 32 bits every 320ns so we
- * shouldn't have to wait long enough to warrant waiting for an IRQ.
- */
-static void picoxcell_trng_start(void)
-{
-	__raw_writel(0, rng_base + TAI_REG_OFFSET);
-	__raw_writel(0, rng_base + CSR_REG_OFFSET);
-}
-
-static void picoxcell_trng_reset(void)
-{
-	__raw_writel(TRNG_BLOCK_RESET_MASK, rng_base + CSR_REG_OFFSET);
-	__raw_writel(TRNG_BLOCK_RESET_MASK, rng_base + TAI_REG_OFFSET);
-	picoxcell_trng_start();
-}
-
-/*
- * Get some random data from the random number generator. The hw_random core
- * layer provides us with locking.
- */
-static int picoxcell_trng_read(struct hwrng *rng, void *buf, size_t max,
-			       bool wait)
-{
-	int i;
-
-	/* Wait for some data to become available. */
-	for (i = 0; i < PICO_TRNG_TIMEOUT && picoxcell_trng_is_empty(); ++i) {
-		if (!wait)
-			return 0;
-
-		udelay(1);
-	}
-
-	if (picoxcell_trng_read_csr() & CSR_FAULT_MASK) {
-		dev_err(rng_dev, "fault detected, resetting TRNG\n");
-		picoxcell_trng_reset();
-		return -EIO;
-	}
-
-	if (i == PICO_TRNG_TIMEOUT)
-		return 0;
-
-	*(u32 *)buf = __raw_readl(rng_base + DATA_REG_OFFSET);
-	return sizeof(u32);
-}
-
-static struct hwrng picoxcell_trng = {
-	.name		= "picoxcell",
-	.read		= picoxcell_trng_read,
-};
-
-static int picoxcell_trng_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	rng_base = devm_ioremap_resource(&pdev->dev, mem);
-	if (IS_ERR(rng_base))
-		return PTR_ERR(rng_base);
-
-	rng_clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(rng_clk)) {
-		dev_warn(&pdev->dev, "no clk\n");
-		return PTR_ERR(rng_clk);
-	}
-
-	ret = clk_enable(rng_clk);
-	if (ret) {
-		dev_warn(&pdev->dev, "unable to enable clk\n");
-		return ret;
-	}
-
-	picoxcell_trng_start();
-	ret = hwrng_register(&picoxcell_trng);
-	if (ret)
-		goto err_register;
-
-	rng_dev = &pdev->dev;
-	dev_info(&pdev->dev, "pixoxcell random number generator active\n");
-
-	return 0;
-
-err_register:
-	clk_disable(rng_clk);
-	return ret;
-}
-
-static int picoxcell_trng_remove(struct platform_device *pdev)
-{
-	hwrng_unregister(&picoxcell_trng);
-	clk_disable(rng_clk);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int picoxcell_trng_suspend(struct device *dev)
-{
-	clk_disable(rng_clk);
-
-	return 0;
-}
-
-static int picoxcell_trng_resume(struct device *dev)
-{
-	return clk_enable(rng_clk);
-}
-
-static const struct dev_pm_ops picoxcell_trng_pm_ops = {
-	.suspend	= picoxcell_trng_suspend,
-	.resume		= picoxcell_trng_resume,
-};
-#endif /* CONFIG_PM */
-
-static struct platform_driver picoxcell_trng_driver = {
-	.probe		= picoxcell_trng_probe,
-	.remove		= picoxcell_trng_remove,
-	.driver		= {
-		.name	= "picoxcell-trng",
-		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
-		.pm	= &picoxcell_trng_pm_ops,
-#endif /* CONFIG_PM */
-	},
-};
-
-module_platform_driver(picoxcell_trng_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jamie Iles");
-MODULE_DESCRIPTION("Picochip picoXcell TRNG driver");
-- 
1.9.0

[PATCH] hwrng: remove unbuildable picoxcell TRNG

[Paul Bolle]

The driver for the "Picochip picoXcell true random number generator" was
added in v2.6.39. Its Kconfig symbol has always depended on
PICOXCELL_PC3X3. But that Kconfig symbol has never been part of the
tree. This means this driver has never been buildable. Let's remove it.
It can be re-added if its dependencies are actually part of the tree.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
Tested only by grepping the tree!

 drivers/char/hw_random/Kconfig         |  12 ---
 drivers/char/hw_random/Makefile        |   1 -
 drivers/char/hw_random/picoxcell-rng.c | 181 ---------------------------------
 3 files changed, 194 deletions(-)
 delete mode 100644 drivers/char/hw_random/picoxcell-rng.c

diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 244759bbd7b7..d994c85a923c 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -251,18 +251,6 @@ config HW_RANDOM_NOMADIK
 
 	  If unsure, say Y.
 
-config HW_RANDOM_PICOXCELL
-	tristate "Picochip picoXcell true random number generator support"
-	depends on HW_RANDOM && ARCH_PICOXCELL && PICOXCELL_PC3X3
-	---help---
-	  This driver provides kernel-side support for the Random Number
-	  Generator hardware found on Picochip PC3x3 and later devices.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called picoxcell-rng.
-
-	  If unsure, say Y.
-
 config HW_RANDOM_PPC4XX
 	tristate "PowerPC 4xx generic true random number generator support"
 	depends on HW_RANDOM && PPC && 4xx
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 3ae7755a52e7..199ed283e149 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -22,7 +22,6 @@ obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
 obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
 obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
 obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o
-obj-$(CONFIG_HW_RANDOM_PICOXCELL) += picoxcell-rng.o
 obj-$(CONFIG_HW_RANDOM_PPC4XX) += ppc4xx-rng.o
 obj-$(CONFIG_HW_RANDOM_PSERIES) += pseries-rng.o
 obj-$(CONFIG_HW_RANDOM_POWERNV) += powernv-rng.o
diff --git a/drivers/char/hw_random/picoxcell-rng.c b/drivers/char/hw_random/picoxcell-rng.c
deleted file mode 100644
index eab5448ad56f..000000000000
--- a/drivers/char/hw_random/picoxcell-rng.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * All enquiries to support at picochip.com
- */
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/hw_random.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#define DATA_REG_OFFSET		0x0200
-#define CSR_REG_OFFSET		0x0278
-#define CSR_OUT_EMPTY_MASK	(1 << 24)
-#define CSR_FAULT_MASK		(1 << 1)
-#define TRNG_BLOCK_RESET_MASK	(1 << 0)
-#define TAI_REG_OFFSET		0x0380
-
-/*
- * The maximum amount of time in microseconds to spend waiting for data if the
- * core wants us to wait.  The TRNG should generate 32 bits every 320ns so a
- * timeout of 20us seems reasonable.  The TRNG does builtin tests of the data
- * for randomness so we can't always assume there is data present.
- */
-#define PICO_TRNG_TIMEOUT		20
-
-static void __iomem *rng_base;
-static struct clk *rng_clk;
-static struct device *rng_dev;
-
-static inline u32 picoxcell_trng_read_csr(void)
-{
-	return __raw_readl(rng_base + CSR_REG_OFFSET);
-}
-
-static inline bool picoxcell_trng_is_empty(void)
-{
-	return picoxcell_trng_read_csr() & CSR_OUT_EMPTY_MASK;
-}
-
-/*
- * Take the random number generator out of reset and make sure the interrupts
- * are masked. We shouldn't need to get large amounts of random bytes so just
- * poll the status register. The hardware generates 32 bits every 320ns so we
- * shouldn't have to wait long enough to warrant waiting for an IRQ.
- */
-static void picoxcell_trng_start(void)
-{
-	__raw_writel(0, rng_base + TAI_REG_OFFSET);
-	__raw_writel(0, rng_base + CSR_REG_OFFSET);
-}
-
-static void picoxcell_trng_reset(void)
-{
-	__raw_writel(TRNG_BLOCK_RESET_MASK, rng_base + CSR_REG_OFFSET);
-	__raw_writel(TRNG_BLOCK_RESET_MASK, rng_base + TAI_REG_OFFSET);
-	picoxcell_trng_start();
-}
-
-/*
- * Get some random data from the random number generator. The hw_random core
- * layer provides us with locking.
- */
-static int picoxcell_trng_read(struct hwrng *rng, void *buf, size_t max,
-			       bool wait)
-{
-	int i;
-
-	/* Wait for some data to become available. */
-	for (i = 0; i < PICO_TRNG_TIMEOUT && picoxcell_trng_is_empty(); ++i) {
-		if (!wait)
-			return 0;
-
-		udelay(1);
-	}
-
-	if (picoxcell_trng_read_csr() & CSR_FAULT_MASK) {
-		dev_err(rng_dev, "fault detected, resetting TRNG\n");
-		picoxcell_trng_reset();
-		return -EIO;
-	}
-
-	if (i == PICO_TRNG_TIMEOUT)
-		return 0;
-
-	*(u32 *)buf = __raw_readl(rng_base + DATA_REG_OFFSET);
-	return sizeof(u32);
-}
-
-static struct hwrng picoxcell_trng = {
-	.name		= "picoxcell",
-	.read		= picoxcell_trng_read,
-};
-
-static int picoxcell_trng_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	rng_base = devm_ioremap_resource(&pdev->dev, mem);
-	if (IS_ERR(rng_base))
-		return PTR_ERR(rng_base);
-
-	rng_clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(rng_clk)) {
-		dev_warn(&pdev->dev, "no clk\n");
-		return PTR_ERR(rng_clk);
-	}
-
-	ret = clk_enable(rng_clk);
-	if (ret) {
-		dev_warn(&pdev->dev, "unable to enable clk\n");
-		return ret;
-	}
-
-	picoxcell_trng_start();
-	ret = hwrng_register(&picoxcell_trng);
-	if (ret)
-		goto err_register;
-
-	rng_dev = &pdev->dev;
-	dev_info(&pdev->dev, "pixoxcell random number generator active\n");
-
-	return 0;
-
-err_register:
-	clk_disable(rng_clk);
-	return ret;
-}
-
-static int picoxcell_trng_remove(struct platform_device *pdev)
-{
-	hwrng_unregister(&picoxcell_trng);
-	clk_disable(rng_clk);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int picoxcell_trng_suspend(struct device *dev)
-{
-	clk_disable(rng_clk);
-
-	return 0;
-}
-
-static int picoxcell_trng_resume(struct device *dev)
-{
-	return clk_enable(rng_clk);
-}
-
-static const struct dev_pm_ops picoxcell_trng_pm_ops = {
-	.suspend	= picoxcell_trng_suspend,
-	.resume		= picoxcell_trng_resume,
-};
-#endif /* CONFIG_PM */
-
-static struct platform_driver picoxcell_trng_driver = {
-	.probe		= picoxcell_trng_probe,
-	.remove		= picoxcell_trng_remove,
-	.driver		= {
-		.name	= "picoxcell-trng",
-		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
-		.pm	= &picoxcell_trng_pm_ops,
-#endif /* CONFIG_PM */
-	},
-};
-
-module_platform_driver(picoxcell_trng_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jamie Iles");
-MODULE_DESCRIPTION("Picochip picoXcell TRNG driver");
-- 
1.9.0

Re: [PATCH] hwrng: remove unbuildable picoxcell TRNG

[Jamie Iles]

Hi Paul,

On Tue, Apr 15, 2014 at 10:55:18AM +0200, Paul Bolle wrote:
> The driver for the "Picochip picoXcell true random number generator" was
> added in v2.6.39. Its Kconfig symbol has always depended on
> PICOXCELL_PC3X3. But that Kconfig symbol has never been part of the
> tree. This means this driver has never been buildable. Let's remove it.
> It can be re-added if its dependencies are actually part of the tree.
> 
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>

I wish I had the bandwidth to get this properly supported, but this 
seems sensible to me.

Acked-by: Jamie Iles <jamie@jamieiles.com>

Thanks,

Jamie

[PATCH] hwrng: remove unbuildable picoxcell TRNG

[Jamie Iles]

Hi Paul,

On Tue, Apr 15, 2014 at 10:55:18AM +0200, Paul Bolle wrote:
> The driver for the "Picochip picoXcell true random number generator" was
> added in v2.6.39. Its Kconfig symbol has always depended on
> PICOXCELL_PC3X3. But that Kconfig symbol has never been part of the
> tree. This means this driver has never been buildable. Let's remove it.
> It can be re-added if its dependencies are actually part of the tree.
> 
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>

I wish I had the bandwidth to get this properly supported, but this 
seems sensible to me.

Acked-by: Jamie Iles <jamie@jamieiles.com>

Thanks,

Jamie

Re: [PATCH] hwrng: remove unbuildable picoxcell TRNG

[Herbert Xu]

On Tue, Apr 15, 2014 at 11:06:14AM +0100, Jamie Iles wrote:
> Hi Paul,
> 
> On Tue, Apr 15, 2014 at 10:55:18AM +0200, Paul Bolle wrote:
> > The driver for the "Picochip picoXcell true random number generator" was
> > added in v2.6.39. Its Kconfig symbol has always depended on
> > PICOXCELL_PC3X3. But that Kconfig symbol has never been part of the
> > tree. This means this driver has never been buildable. Let's remove it.
> > It can be re-added if its dependencies are actually part of the tree.
> > 
> > Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> 
> I wish I had the bandwidth to get this properly supported, but this 
> seems sensible to me.
> 
> Acked-by: Jamie Iles <jamie@jamieiles.com>

Patch applied.
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

[PATCH] hwrng: remove unbuildable picoxcell TRNG

[Herbert Xu]

On Tue, Apr 15, 2014 at 11:06:14AM +0100, Jamie Iles wrote:
> Hi Paul,
> 
> On Tue, Apr 15, 2014 at 10:55:18AM +0200, Paul Bolle wrote:
> > The driver for the "Picochip picoXcell true random number generator" was
> > added in v2.6.39. Its Kconfig symbol has always depended on
> > PICOXCELL_PC3X3. But that Kconfig symbol has never been part of the
> > tree. This means this driver has never been buildable. Let's remove it.
> > It can be re-added if its dependencies are actually part of the tree.
> > 
> > Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> 
> I wish I had the bandwidth to get this properly supported, but this 
> seems sensible to me.
> 
> Acked-by: Jamie Iles <jamie@jamieiles.com>

Patch applied.
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

[PATCH 07/28] Remove CPU_PXA988

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/video/mmp/Kconfig       |  2 +-
 drivers/video/mmp/hw/Kconfig    |  2 +-
 drivers/video/mmp/hw/mmp_ctrl.h | 32 --------------------------------
 3 files changed, 2 insertions(+), 34 deletions(-)

diff --git a/drivers/video/mmp/Kconfig b/drivers/video/mmp/Kconfig
index 969925d..f37bd6c 100644
--- a/drivers/video/mmp/Kconfig
+++ b/drivers/video/mmp/Kconfig
@@ -1,6 +1,6 @@
 menuconfig MMP_DISP
         tristate "Marvell MMP Display Subsystem support"
-        depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
+        depends on CPU_PXA910 || CPU_MMP2
         help
 	  Marvell Display Subsystem support.
 
diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
index 57b03e2..95e8ec2 100644
--- a/drivers/video/mmp/hw/Kconfig
+++ b/drivers/video/mmp/hw/Kconfig
@@ -2,7 +2,7 @@ if MMP_DISP
 
 config MMP_DISP_CONTROLLER
 	bool "mmp display controller hw support"
-	depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
+	depends on CPU_PXA910 || CPU_MMP2
 	default n
 	help
 		Marvell MMP display hw controller support
diff --git a/drivers/video/mmp/hw/mmp_ctrl.h b/drivers/video/mmp/hw/mmp_ctrl.h
index 53301cf..56fdeab 100644
--- a/drivers/video/mmp/hw/mmp_ctrl.h
+++ b/drivers/video/mmp/hw/mmp_ctrl.h
@@ -167,11 +167,7 @@ struct lcd_regs {
 				PN2_IOPAD_CONTROL) : LCD_TOP_CTRL)
 
 /* dither configure */
-#ifdef CONFIG_CPU_PXA988
-#define LCD_DITHER_CTRL				(0x01EC)
-#else
 #define LCD_DITHER_CTRL				(0x00A0)
-#endif
 
 #define DITHER_TBL_INDEX_SEL(s)		((s) << 16)
 #define DITHER_MODE2(m)				((m) << 12)
@@ -186,15 +182,6 @@ struct lcd_regs {
 #define DITHER_EN1					(1)
 
 /* dither table data was fixed by video bpp of input and output*/
-#ifdef CONFIG_CPU_PXA988
-#define DITHER_TB_4X4_INDEX0		(0x6e4ca280)
-#define DITHER_TB_4X4_INDEX1		(0x5d7f91b3)
-#define DITHER_TB_4X8_INDEX0		(0xb391a280)
-#define DITHER_TB_4X8_INDEX1		(0x7f5d6e4c)
-#define DITHER_TB_4X8_INDEX2		(0x80a291b3)
-#define DITHER_TB_4X8_INDEX3		(0x4c6e5d7f)
-#define LCD_DITHER_TBL_DATA		(0x01F0)
-#else
 #define DITHER_TB_4X4_INDEX0		(0x3b19f7d5)
 #define DITHER_TB_4X4_INDEX1		(0x082ac4e6)
 #define DITHER_TB_4X8_INDEX0		(0xf7d508e6)
@@ -202,7 +189,6 @@ struct lcd_regs {
 #define DITHER_TB_4X8_INDEX2		(0xc4e6d5f7)
 #define DITHER_TB_4X8_INDEX3		(0x082a193b)
 #define LCD_DITHER_TBL_DATA		(0x00A4)
-#endif
 
 /* Video Frame 0&1 start address registers */
 #define	LCD_SPU_DMA_START_ADDR_Y0	0x00C0
@@ -933,16 +919,9 @@ struct lcd_regs {
 #define LCD_PN2_SQULN2_CTRL			(0x02F0)
 #define ALL_LAYER_ALPHA_SEL			(0x02F4)
 
-/* pxa988 has different MASTER_CTRL from MMP3/MMP2 */
-#ifdef CONFIG_CPU_PXA988
-#define TIMING_MASTER_CONTROL			(0x01F4)
-#define MASTER_ENH(id)				(1 << ((id) + 5))
-#define MASTER_ENV(id)				(1 << ((id) + 6))
-#else
 #define TIMING_MASTER_CONTROL			(0x02F8)
 #define MASTER_ENH(id)				(1 << (id))
 #define MASTER_ENV(id)				(1 << ((id) + 4))
-#endif
 
 #define DSI_START_SEL_SHIFT(id)		(((id) << 1) + 8)
 #define timing_master_config(path, dsi_id, lcd_id) \
@@ -1312,19 +1291,8 @@ struct dsi_regs {
 #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_MASK		(0xff)
 #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_SHIFT	0
 
-/*
- * DSI timings
- * PXA988 has diffrent ESC CLK with MMP2/MMP3
- * it will be used in dsi_set_dphy() in pxa688_phy.c
- * as low power mode clock.
- */
-#ifdef CONFIG_CPU_PXA988
-#define DSI_ESC_CLK				52  /* Unit: Mhz */
-#define DSI_ESC_CLK_T				19  /* Unit: ns */
-#else
 #define DSI_ESC_CLK				66  /* Unit: Mhz */
 #define DSI_ESC_CLK_T				15  /* Unit: ns */
-#endif
 
 /* LVDS */
 /* LVDS_PHY_CTRL */
-- 
1.8.4.2

[PATCH 07/28] Remove CPU_PXA988

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/video/mmp/Kconfig       |  2 +-
 drivers/video/mmp/hw/Kconfig    |  2 +-
 drivers/video/mmp/hw/mmp_ctrl.h | 32 --------------------------------
 3 files changed, 2 insertions(+), 34 deletions(-)

diff --git a/drivers/video/mmp/Kconfig b/drivers/video/mmp/Kconfig
index 969925d..f37bd6c 100644
--- a/drivers/video/mmp/Kconfig
+++ b/drivers/video/mmp/Kconfig
@@ -1,6 +1,6 @@
 menuconfig MMP_DISP
         tristate "Marvell MMP Display Subsystem support"
-        depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
+        depends on CPU_PXA910 || CPU_MMP2
         help
 	  Marvell Display Subsystem support.
 
diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
index 57b03e2..95e8ec2 100644
--- a/drivers/video/mmp/hw/Kconfig
+++ b/drivers/video/mmp/hw/Kconfig
@@ -2,7 +2,7 @@ if MMP_DISP
 
 config MMP_DISP_CONTROLLER
 	bool "mmp display controller hw support"
-	depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
+	depends on CPU_PXA910 || CPU_MMP2
 	default n
 	help
 		Marvell MMP display hw controller support
diff --git a/drivers/video/mmp/hw/mmp_ctrl.h b/drivers/video/mmp/hw/mmp_ctrl.h
index 53301cf..56fdeab 100644
--- a/drivers/video/mmp/hw/mmp_ctrl.h
+++ b/drivers/video/mmp/hw/mmp_ctrl.h
@@ -167,11 +167,7 @@ struct lcd_regs {
 				PN2_IOPAD_CONTROL) : LCD_TOP_CTRL)
 
 /* dither configure */
-#ifdef CONFIG_CPU_PXA988
-#define LCD_DITHER_CTRL				(0x01EC)
-#else
 #define LCD_DITHER_CTRL				(0x00A0)
-#endif
 
 #define DITHER_TBL_INDEX_SEL(s)		((s) << 16)
 #define DITHER_MODE2(m)				((m) << 12)
@@ -186,15 +182,6 @@ struct lcd_regs {
 #define DITHER_EN1					(1)
 
 /* dither table data was fixed by video bpp of input and output*/
-#ifdef CONFIG_CPU_PXA988
-#define DITHER_TB_4X4_INDEX0		(0x6e4ca280)
-#define DITHER_TB_4X4_INDEX1		(0x5d7f91b3)
-#define DITHER_TB_4X8_INDEX0		(0xb391a280)
-#define DITHER_TB_4X8_INDEX1		(0x7f5d6e4c)
-#define DITHER_TB_4X8_INDEX2		(0x80a291b3)
-#define DITHER_TB_4X8_INDEX3		(0x4c6e5d7f)
-#define LCD_DITHER_TBL_DATA		(0x01F0)
-#else
 #define DITHER_TB_4X4_INDEX0		(0x3b19f7d5)
 #define DITHER_TB_4X4_INDEX1		(0x082ac4e6)
 #define DITHER_TB_4X8_INDEX0		(0xf7d508e6)
@@ -202,7 +189,6 @@ struct lcd_regs {
 #define DITHER_TB_4X8_INDEX2		(0xc4e6d5f7)
 #define DITHER_TB_4X8_INDEX3		(0x082a193b)
 #define LCD_DITHER_TBL_DATA		(0x00A4)
-#endif
 
 /* Video Frame 0&1 start address registers */
 #define	LCD_SPU_DMA_START_ADDR_Y0	0x00C0
@@ -933,16 +919,9 @@ struct lcd_regs {
 #define LCD_PN2_SQULN2_CTRL			(0x02F0)
 #define ALL_LAYER_ALPHA_SEL			(0x02F4)
 
-/* pxa988 has different MASTER_CTRL from MMP3/MMP2 */
-#ifdef CONFIG_CPU_PXA988
-#define TIMING_MASTER_CONTROL			(0x01F4)
-#define MASTER_ENH(id)				(1 << ((id) + 5))
-#define MASTER_ENV(id)				(1 << ((id) + 6))
-#else
 #define TIMING_MASTER_CONTROL			(0x02F8)
 #define MASTER_ENH(id)				(1 << (id))
 #define MASTER_ENV(id)				(1 << ((id) + 4))
-#endif
 
 #define DSI_START_SEL_SHIFT(id)		(((id) << 1) + 8)
 #define timing_master_config(path, dsi_id, lcd_id) \
@@ -1312,19 +1291,8 @@ struct dsi_regs {
 #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_MASK		(0xff)
 #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_SHIFT	0
 
-/*
- * DSI timings
- * PXA988 has diffrent ESC CLK with MMP2/MMP3
- * it will be used in dsi_set_dphy() in pxa688_phy.c
- * as low power mode clock.
- */
-#ifdef CONFIG_CPU_PXA988
-#define DSI_ESC_CLK				52  /* Unit: Mhz */
-#define DSI_ESC_CLK_T				19  /* Unit: ns */
-#else
 #define DSI_ESC_CLK				66  /* Unit: Mhz */
 #define DSI_ESC_CLK_T				15  /* Unit: ns */
-#endif
 
 /* LVDS */
 /* LVDS_PHY_CTRL */
-- 
1.8.4.2

Re: [PATCH 07/28] Remove CPU_PXA988

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

This one first entered the tree in v3.9, with commit 59393bb94c10
("video: mmp display subsystem"). The Kconfig symbol has not yet been
added.

>  drivers/video/mmp/Kconfig       |  2 +-
>  drivers/video/mmp/hw/Kconfig    |  2 +-
>  drivers/video/mmp/hw/mmp_ctrl.h | 32 --------------------------------
>  3 files changed, 2 insertions(+), 34 deletions(-)
> 
> [..] 
>
> diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
> index 57b03e2..95e8ec2 100644
> --- a/drivers/video/mmp/hw/Kconfig
> +++ b/drivers/video/mmp/hw/Kconfig
> @@ -2,7 +2,7 @@ if MMP_DISP
>  
>  config MMP_DISP_CONTROLLER
>  	bool "mmp display controller hw support"
> -	depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
> +	depends on CPU_PXA910 || CPU_MMP2
>  	default n
>  	help
>  		Marvell MMP display hw controller support

Please also remove the reference to PXA988 in the help text. Aside from
that:
    Acked-by: Paul Bolle <pebolle@tiscali.nl>


Paul Bolle

Re: [PATCH 07/28] Remove CPU_PXA988

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

This one first entered the tree in v3.9, with commit 59393bb94c10
("video: mmp display subsystem"). The Kconfig symbol has not yet been
added.

>  drivers/video/mmp/Kconfig       |  2 +-
>  drivers/video/mmp/hw/Kconfig    |  2 +-
>  drivers/video/mmp/hw/mmp_ctrl.h | 32 --------------------------------
>  3 files changed, 2 insertions(+), 34 deletions(-)
> 
> [..] 
>
> diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig
> index 57b03e2..95e8ec2 100644
> --- a/drivers/video/mmp/hw/Kconfig
> +++ b/drivers/video/mmp/hw/Kconfig
> @@ -2,7 +2,7 @@ if MMP_DISP
>  
>  config MMP_DISP_CONTROLLER
>  	bool "mmp display controller hw support"
> -	depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988
> +	depends on CPU_PXA910 || CPU_MMP2
>  	default n
>  	help
>  		Marvell MMP display hw controller support

Please also remove the reference to PXA988 in the help text. Aside from
that:
    Acked-by: Paul Bolle <pebolle@tiscali.nl>


Paul Bolle

Re: [PATCH 07/28] Remove CPU_PXA988

[Paul Bolle]

Richard,

On Sun, 2014-02-09 at 23:26 +0100, Richard Weinberger wrote:
> Am 09.02.2014 23:24, schrieb Paul Bolle:
> > On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> >> The symbol is an orphan, get rid of it.
> >>
> >> Signed-off-by: Richard Weinberger <richard@nod.at>
> > 
> > This one first entered the tree in v3.9, with commit 59393bb94c10
> > ("video: mmp display subsystem"). The Kconfig symbol has not yet been
> > added.
> 
> Thanks a lot for digging out the background info!
> I'll add them to the commit message.

Did you ever find the time to update the commit message? If not, should
I submit an updated version of this patch?


Paul Bolle

Re: [PATCH 07/28] Remove CPU_PXA988

[Paul Bolle]

Richard,

On Sun, 2014-02-09 at 23:26 +0100, Richard Weinberger wrote:
> Am 09.02.2014 23:24, schrieb Paul Bolle:
> > On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> >> The symbol is an orphan, get rid of it.
> >>
> >> Signed-off-by: Richard Weinberger <richard@nod.at>
> > 
> > This one first entered the tree in v3.9, with commit 59393bb94c10
> > ("video: mmp display subsystem"). The Kconfig symbol has not yet been
> > added.
> 
> Thanks a lot for digging out the background info!
> I'll add them to the commit message.

Did you ever find the time to update the commit message? If not, should
I submit an updated version of this patch?


Paul Bolle

Re: [PATCH 07/28] Remove CPU_PXA988

[Richard Weinberger]

Am 15.04.2014 09:47, schrieb Paul Bolle:
> Richard,
> 
> On Sun, 2014-02-09 at 23:26 +0100, Richard Weinberger wrote:
>> Am 09.02.2014 23:24, schrieb Paul Bolle:
>>> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
>>>> The symbol is an orphan, get rid of it.
>>>>
>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>>
>>> This one first entered the tree in v3.9, with commit 59393bb94c10
>>> ("video: mmp display subsystem"). The Kconfig symbol has not yet been
>>> added.
>>
>> Thanks a lot for digging out the background info!
>> I'll add them to the commit message.
> 
> Did you ever find the time to update the commit message? If not, should
> I submit an updated version of this patch?

Sadly not.

Feel free to take this (and other related) patches over.
Thanks a lot for caring!

Thanks,
//richard

Re: [PATCH 07/28] Remove CPU_PXA988

[Richard Weinberger]

Am 15.04.2014 09:47, schrieb Paul Bolle:
> Richard,
> 
> On Sun, 2014-02-09 at 23:26 +0100, Richard Weinberger wrote:
>> Am 09.02.2014 23:24, schrieb Paul Bolle:
>>> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
>>>> The symbol is an orphan, get rid of it.
>>>>
>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>>
>>> This one first entered the tree in v3.9, with commit 59393bb94c10
>>> ("video: mmp display subsystem"). The Kconfig symbol has not yet been
>>> added.
>>
>> Thanks a lot for digging out the background info!
>> I'll add them to the commit message.
> 
> Did you ever find the time to update the commit message? If not, should
> I submit an updated version of this patch?

Sadly not.

Feel free to take this (and other related) patches over.
Thanks a lot for caring!

Thanks,
//richard

[PATCH 08/28] Remove SYS_HAS_DMA_OPS

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/mips/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index dcae3a7..792bd22 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1396,7 +1396,6 @@ config CPU_CAVIUM_OCTEON
 	select LIBFDT
 	select USE_OF
 	select USB_EHCI_BIG_ENDIAN_MMIO
-	select SYS_HAS_DMA_OPS
 	select MIPS_L1_CACHE_SHIFT_7
 	help
 	  The Cavium Octeon processor is a highly integrated chip containing
-- 
1.8.4.2

[PATCH 08/28] Remove SYS_HAS_DMA_OPS

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/mips/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index dcae3a7..792bd22 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1396,7 +1396,6 @@ config CPU_CAVIUM_OCTEON
 	select LIBFDT
 	select USE_OF
 	select USB_EHCI_BIG_ENDIAN_MMIO
-	select SYS_HAS_DMA_OPS
 	select MIPS_L1_CACHE_SHIFT_7
 	help
 	  The Cavium Octeon processor is a highly integrated chip containing
-- 
1.8.4.2

Re: [PATCH 08/28] Remove SYS_HAS_DMA_OPS

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.

I don't think a symbol with that name was ever part of the tree (but I
didn't look past v2.6.12). It seems just a typo, but it's unclear what
was intended here. It's a nop now, so safe to remove.

> Signed-off-by: Richard Weinberger <richard@nod.at>

So, perhaps Richard should update the commit explanation. But I'm fine
with the patch itself:
    Acked-by: Paul Bolle <pebolle@tiscali.nl>
 

Paul Bolle

[PATCH 09/28] Remove ATHEROS_AR231X

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
 drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
 drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
 drivers/net/wireless/ath/ath5k/led.c   |  7 -------
 4 files changed, 5 insertions(+), 54 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index c9f81a3..3bc0d57 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,13 +1,13 @@
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
-	depends on (PCI || ATHEROS_AR231X) && MAC80211
+	depends on PCI && MAC80211
 	select ATH_COMMON
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
 	select AVERAGE
-	select ATH5K_AHB if (ATHEROS_AR231X && !PCI)
-	select ATH5K_PCI if (!ATHEROS_AR231X && PCI)
+	select ATH5K_AHB if !PCI
+	select ATH5K_PCI if PCI
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros 5xxx chipset.
@@ -54,14 +54,14 @@ config ATH5K_TRACER
 
 config ATH5K_AHB
 	bool "Atheros 5xxx AHB bus support"
-	depends on (ATHEROS_AR231X && !PCI)
+	depends on !PCI
 	---help---
 	  This adds support for WiSoC type chipsets of the 5xxx Atheros
 	  family.
 
 config ATH5K_PCI
 	bool "Atheros 5xxx PCI bus support"
-	depends on (!ATHEROS_AR231X && PCI)
+	depends on PCI
 	---help---
 	  This adds support for PCI type chipsets of the 5xxx Atheros
 	  family.
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 74bd54d..5f2843c 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1646,32 +1646,6 @@ static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
 	return &(ath5k_hw_common(ah)->regulatory);
 }
 
-#ifdef CONFIG_ATHEROS_AR231X
-#define AR5K_AR2315_PCI_BASE	((void __iomem *)0xb0100000)
-
-static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
-{
-	/* On AR2315 and AR2317 the PCI clock domain registers
-	 * are outside of the WMAC register space */
-	if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
-	    (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
-		return AR5K_AR2315_PCI_BASE + reg;
-
-	return ah->iobase + reg;
-}
-
-static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
-{
-	return ioread32(ath5k_ahb_reg(ah, reg));
-}
-
-static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
-{
-	iowrite32(val, ath5k_ahb_reg(ah, reg));
-}
-
-#else
-
 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
 {
 	return ioread32(ah->iobase + reg);
@@ -1682,8 +1656,6 @@ static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
 	iowrite32(val, ah->iobase + reg);
 }
 
-#endif
-
 static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah)
 {
 	return ath5k_hw_common(ah)->bus_ops->ath_bus_type;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index ef35da8..d43e546 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -99,15 +99,6 @@ static int ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan,
 
 /* Known SREVs */
 static const struct ath5k_srev_name srev_names[] = {
-#ifdef CONFIG_ATHEROS_AR231X
-	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R2 },
-	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R7 },
-	{ "2313",	AR5K_VERSION_MAC,	AR5K_SREV_AR2313_R8 },
-	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R6 },
-	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R7 },
-	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R1 },
-	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R2 },
-#else
 	{ "5210",	AR5K_VERSION_MAC,	AR5K_SREV_AR5210 },
 	{ "5311",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311 },
 	{ "5311A",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311A },
@@ -126,7 +117,6 @@ static const struct ath5k_srev_name srev_names[] = {
 	{ "5418",	AR5K_VERSION_MAC,	AR5K_SREV_AR5418 },
 	{ "2425",	AR5K_VERSION_MAC,	AR5K_SREV_AR2425 },
 	{ "2417",	AR5K_VERSION_MAC,	AR5K_SREV_AR2417 },
-#endif
 	{ "xxxxx",	AR5K_VERSION_MAC,	AR5K_SREV_UNKNOWN },
 	{ "5110",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5110 },
 	{ "5111",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5111 },
@@ -142,10 +132,6 @@ static const struct ath5k_srev_name srev_names[] = {
 	{ "5413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5413 },
 	{ "5424",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5424 },
 	{ "5133",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5133 },
-#ifdef CONFIG_ATHEROS_AR231X
-	{ "2316",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2316 },
-	{ "2317",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2317 },
-#endif
 	{ "xxxxx",	AR5K_VERSION_RAD,	AR5K_SREV_UNKNOWN },
 };
 
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index f77ef36..c36a98f 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -162,20 +162,13 @@ int ath5k_init_leds(struct ath5k_hw *ah)
 {
 	int ret = 0;
 	struct ieee80211_hw *hw = ah->hw;
-#ifndef CONFIG_ATHEROS_AR231X
-	struct pci_dev *pdev = ah->pdev;
-#endif
 	char name[ATH5K_LED_MAX_NAME_LEN + 1];
 	const struct pci_device_id *match;
 
 	if (!ah->pdev)
 		return 0;
 
-#ifdef CONFIG_ATHEROS_AR231X
-	match = NULL;
-#else
 	match = pci_match_id(&ath5k_led_devices[0], pdev);
-#endif
 	if (match) {
 		__set_bit(ATH_STAT_LEDSOFT, ah->status);
 		ah->led_pin = ATH_PIN(match->driver_data);
-- 
1.8.4.2

[PATCH 09/28] Remove ATHEROS_AR231X

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard-/L3Ra7n9ekc@public.gmane.org>
---
 drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
 drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
 drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
 drivers/net/wireless/ath/ath5k/led.c   |  7 -------
 4 files changed, 5 insertions(+), 54 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index c9f81a3..3bc0d57 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,13 +1,13 @@
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
-	depends on (PCI || ATHEROS_AR231X) && MAC80211
+	depends on PCI && MAC80211
 	select ATH_COMMON
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
 	select AVERAGE
-	select ATH5K_AHB if (ATHEROS_AR231X && !PCI)
-	select ATH5K_PCI if (!ATHEROS_AR231X && PCI)
+	select ATH5K_AHB if !PCI
+	select ATH5K_PCI if PCI
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros 5xxx chipset.
@@ -54,14 +54,14 @@ config ATH5K_TRACER
 
 config ATH5K_AHB
 	bool "Atheros 5xxx AHB bus support"
-	depends on (ATHEROS_AR231X && !PCI)
+	depends on !PCI
 	---help---
 	  This adds support for WiSoC type chipsets of the 5xxx Atheros
 	  family.
 
 config ATH5K_PCI
 	bool "Atheros 5xxx PCI bus support"
-	depends on (!ATHEROS_AR231X && PCI)
+	depends on PCI
 	---help---
 	  This adds support for PCI type chipsets of the 5xxx Atheros
 	  family.
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 74bd54d..5f2843c 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1646,32 +1646,6 @@ static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
 	return &(ath5k_hw_common(ah)->regulatory);
 }
 
-#ifdef CONFIG_ATHEROS_AR231X
-#define AR5K_AR2315_PCI_BASE	((void __iomem *)0xb0100000)
-
-static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
-{
-	/* On AR2315 and AR2317 the PCI clock domain registers
-	 * are outside of the WMAC register space */
-	if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
-	    (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
-		return AR5K_AR2315_PCI_BASE + reg;
-
-	return ah->iobase + reg;
-}
-
-static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
-{
-	return ioread32(ath5k_ahb_reg(ah, reg));
-}
-
-static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
-{
-	iowrite32(val, ath5k_ahb_reg(ah, reg));
-}
-
-#else
-
 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
 {
 	return ioread32(ah->iobase + reg);
@@ -1682,8 +1656,6 @@ static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
 	iowrite32(val, ah->iobase + reg);
 }
 
-#endif
-
 static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah)
 {
 	return ath5k_hw_common(ah)->bus_ops->ath_bus_type;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index ef35da8..d43e546 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -99,15 +99,6 @@ static int ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan,
 
 /* Known SREVs */
 static const struct ath5k_srev_name srev_names[] = {
-#ifdef CONFIG_ATHEROS_AR231X
-	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R2 },
-	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R7 },
-	{ "2313",	AR5K_VERSION_MAC,	AR5K_SREV_AR2313_R8 },
-	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R6 },
-	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R7 },
-	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R1 },
-	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R2 },
-#else
 	{ "5210",	AR5K_VERSION_MAC,	AR5K_SREV_AR5210 },
 	{ "5311",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311 },
 	{ "5311A",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311A },
@@ -126,7 +117,6 @@ static const struct ath5k_srev_name srev_names[] = {
 	{ "5418",	AR5K_VERSION_MAC,	AR5K_SREV_AR5418 },
 	{ "2425",	AR5K_VERSION_MAC,	AR5K_SREV_AR2425 },
 	{ "2417",	AR5K_VERSION_MAC,	AR5K_SREV_AR2417 },
-#endif
 	{ "xxxxx",	AR5K_VERSION_MAC,	AR5K_SREV_UNKNOWN },
 	{ "5110",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5110 },
 	{ "5111",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5111 },
@@ -142,10 +132,6 @@ static const struct ath5k_srev_name srev_names[] = {
 	{ "5413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5413 },
 	{ "5424",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5424 },
 	{ "5133",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5133 },
-#ifdef CONFIG_ATHEROS_AR231X
-	{ "2316",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2316 },
-	{ "2317",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2317 },
-#endif
 	{ "xxxxx",	AR5K_VERSION_RAD,	AR5K_SREV_UNKNOWN },
 };
 
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index f77ef36..c36a98f 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -162,20 +162,13 @@ int ath5k_init_leds(struct ath5k_hw *ah)
 {
 	int ret = 0;
 	struct ieee80211_hw *hw = ah->hw;
-#ifndef CONFIG_ATHEROS_AR231X
-	struct pci_dev *pdev = ah->pdev;
-#endif
 	char name[ATH5K_LED_MAX_NAME_LEN + 1];
 	const struct pci_device_id *match;
 
 	if (!ah->pdev)
 		return 0;
 
-#ifdef CONFIG_ATHEROS_AR231X
-	match = NULL;
-#else
 	match = pci_match_id(&ath5k_led_devices[0], pdev);
-#endif
 	if (match) {
 		__set_bit(ATH_STAT_LEDSOFT, ah->status);
 		ah->led_pin = ATH_PIN(match->driver_data);
-- 
1.8.4.2

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 09/28] Remove ATHEROS_AR231X

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
 drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
 drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
 drivers/net/wireless/ath/ath5k/led.c   |  7 -------
 4 files changed, 5 insertions(+), 54 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index c9f81a3..3bc0d57 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,13 +1,13 @@
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
-	depends on (PCI || ATHEROS_AR231X) && MAC80211
+	depends on PCI && MAC80211
 	select ATH_COMMON
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
 	select AVERAGE
-	select ATH5K_AHB if (ATHEROS_AR231X && !PCI)
-	select ATH5K_PCI if (!ATHEROS_AR231X && PCI)
+	select ATH5K_AHB if !PCI
+	select ATH5K_PCI if PCI
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros 5xxx chipset.
@@ -54,14 +54,14 @@ config ATH5K_TRACER
 
 config ATH5K_AHB
 	bool "Atheros 5xxx AHB bus support"
-	depends on (ATHEROS_AR231X && !PCI)
+	depends on !PCI
 	---help---
 	  This adds support for WiSoC type chipsets of the 5xxx Atheros
 	  family.
 
 config ATH5K_PCI
 	bool "Atheros 5xxx PCI bus support"
-	depends on (!ATHEROS_AR231X && PCI)
+	depends on PCI
 	---help---
 	  This adds support for PCI type chipsets of the 5xxx Atheros
 	  family.
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 74bd54d..5f2843c 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1646,32 +1646,6 @@ static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
 	return &(ath5k_hw_common(ah)->regulatory);
 }
 
-#ifdef CONFIG_ATHEROS_AR231X
-#define AR5K_AR2315_PCI_BASE	((void __iomem *)0xb0100000)
-
-static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
-{
-	/* On AR2315 and AR2317 the PCI clock domain registers
-	 * are outside of the WMAC register space */
-	if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
-	    (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
-		return AR5K_AR2315_PCI_BASE + reg;
-
-	return ah->iobase + reg;
-}
-
-static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
-{
-	return ioread32(ath5k_ahb_reg(ah, reg));
-}
-
-static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
-{
-	iowrite32(val, ath5k_ahb_reg(ah, reg));
-}
-
-#else
-
 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
 {
 	return ioread32(ah->iobase + reg);
@@ -1682,8 +1656,6 @@ static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
 	iowrite32(val, ah->iobase + reg);
 }
 
-#endif
-
 static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah)
 {
 	return ath5k_hw_common(ah)->bus_ops->ath_bus_type;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index ef35da8..d43e546 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -99,15 +99,6 @@ static int ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan,
 
 /* Known SREVs */
 static const struct ath5k_srev_name srev_names[] = {
-#ifdef CONFIG_ATHEROS_AR231X
-	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R2 },
-	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R7 },
-	{ "2313",	AR5K_VERSION_MAC,	AR5K_SREV_AR2313_R8 },
-	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R6 },
-	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R7 },
-	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R1 },
-	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R2 },
-#else
 	{ "5210",	AR5K_VERSION_MAC,	AR5K_SREV_AR5210 },
 	{ "5311",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311 },
 	{ "5311A",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311A },
@@ -126,7 +117,6 @@ static const struct ath5k_srev_name srev_names[] = {
 	{ "5418",	AR5K_VERSION_MAC,	AR5K_SREV_AR5418 },
 	{ "2425",	AR5K_VERSION_MAC,	AR5K_SREV_AR2425 },
 	{ "2417",	AR5K_VERSION_MAC,	AR5K_SREV_AR2417 },
-#endif
 	{ "xxxxx",	AR5K_VERSION_MAC,	AR5K_SREV_UNKNOWN },
 	{ "5110",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5110 },
 	{ "5111",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5111 },
@@ -142,10 +132,6 @@ static const struct ath5k_srev_name srev_names[] = {
 	{ "5413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5413 },
 	{ "5424",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5424 },
 	{ "5133",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5133 },
-#ifdef CONFIG_ATHEROS_AR231X
-	{ "2316",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2316 },
-	{ "2317",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2317 },
-#endif
 	{ "xxxxx",	AR5K_VERSION_RAD,	AR5K_SREV_UNKNOWN },
 };
 
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index f77ef36..c36a98f 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -162,20 +162,13 @@ int ath5k_init_leds(struct ath5k_hw *ah)
 {
 	int ret = 0;
 	struct ieee80211_hw *hw = ah->hw;
-#ifndef CONFIG_ATHEROS_AR231X
-	struct pci_dev *pdev = ah->pdev;
-#endif
 	char name[ATH5K_LED_MAX_NAME_LEN + 1];
 	const struct pci_device_id *match;
 
 	if (!ah->pdev)
 		return 0;
 
-#ifdef CONFIG_ATHEROS_AR231X
-	match = NULL;
-#else
 	match = pci_match_id(&ath5k_led_devices[0], pdev);
-#endif
 	if (match) {
 		__set_bit(ATH_STAT_LEDSOFT, ah->status);
 		ah->led_pin = ATH_PIN(match->driver_data);
-- 
1.8.4.2

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Joe Perches]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.

This description seems very incomplete as the symbol
is being used quite a bit and the code the symbol
controls is being deleted as well as the symbol.

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Joe Perches]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.

This description seems very incomplete as the symbol
is being used quite a bit and the code the symbol
controls is being deleted as well as the symbol.


--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Joe Perches]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.

This description seems very incomplete as the symbol
is being used quite a bit and the code the symbol
controls is being deleted as well as the symbol.

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Paul Bolle]

On Sun, 2014-02-09 at 11:09 -0800, Joe Perches wrote:
> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> > The symbol is an orphan, get rid of it.
> 
> This description seems very incomplete as the symbol
> is being used quite a bit and the code the symbol
> controls is being deleted as well as the symbol.

Just yesterday I once again raised this issue (see
https://lkml.org/lkml/2014/2/8/248 ). My patch - which dates form May
2013 - removes quite a bit more than Richard's patch.


Paul Bolle

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Paul Bolle]

On Sun, 2014-02-09 at 11:09 -0800, Joe Perches wrote:
> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> > The symbol is an orphan, get rid of it.
> 
> This description seems very incomplete as the symbol
> is being used quite a bit and the code the symbol
> controls is being deleted as well as the symbol.

Just yesterday I once again raised this issue (see
https://lkml.org/lkml/2014/2/8/248 ). My patch - which dates form May
2013 - removes quite a bit more than Richard's patch.


Paul Bolle

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Hauke Mehrtens]

On 02/09/2014 07:47 PM, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard-/L3Ra7n9ekc@public.gmane.org>
> ---
>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>  4 files changed, 5 insertions(+), 54 deletions(-)
> 

This code is used in OpenWrt with an out of tree arch code for the
Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
this code to mainline Linux kernel, because of lack of time/interest.

Hauke

[0]: https://dev.openwrt.org/browser/trunk/target/linux/atheros/patches-3.10

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Richard Weinberger]

Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>> The symbol is an orphan, get rid of it.
>>
>> Signed-off-by: Richard Weinberger <richard@nod.at>
>> ---
>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>
> 
> This code is used in OpenWrt with an out of tree arch code for the
> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
> this code to mainline Linux kernel, because of lack of time/interest.

Sorry, we don't maintain out of tree code.

Thanks,
//richard

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Richard Weinberger]

Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>> The symbol is an orphan, get rid of it.
>>
>> Signed-off-by: Richard Weinberger <richard@nod.at>
>> ---
>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>
> 
> This code is used in OpenWrt with an out of tree arch code for the
> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
> this code to mainline Linux kernel, because of lack of time/interest.

Sorry, we don't maintain out of tree code.

Thanks,
//richard

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>>> The symbol is an orphan, get rid of it.
>>>
>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>> ---
>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>>
>>
>> This code is used in OpenWrt with an out of tree arch code for the
>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
>> this code to mainline Linux kernel, because of lack of time/interest.
>
> Sorry, we don't maintain out of tree code.
>

Oleksij, Jonathan do you still working to make ar231x devices work
with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
team would like to add upstream support?

1. https://lkml.org/lkml/2013/5/13/321
2. https://lkml.org/lkml/2013/5/13/358

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>>> The symbol is an orphan, get rid of it.
>>>
>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>> ---
>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>>
>>
>> This code is used in OpenWrt with an out of tree arch code for the
>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
>> this code to mainline Linux kernel, because of lack of time/interest.
>
> Sorry, we don't maintain out of tree code.
>

Oleksij, Jonathan do you still working to make ar231x devices work
with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
team would like to add upstream support?

1. https://lkml.org/lkml/2013/5/13/321
2. https://lkml.org/lkml/2013/5/13/358

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Oleksij Rempel]

[-- Attachment #1: Type: text/plain, Size: 1621 bytes --]

Am 10.02.2014 13:05, schrieb Sergey Ryazanov:
> 2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
>> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
>>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>>>> The symbol is an orphan, get rid of it.
>>>>
>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>>> ---
>>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>>>
>>>
>>> This code is used in OpenWrt with an out of tree arch code for the
>>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
>>> this code to mainline Linux kernel, because of lack of time/interest.
>>
>> Sorry, we don't maintain out of tree code.
>>
> 
> Oleksij, Jonathan do you still working to make ar231x devices work
> with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
> team would like to add upstream support?
> 
> 1. https://lkml.org/lkml/2013/5/13/321
> 2. https://lkml.org/lkml/2013/5/13/358
> 

Hi,
my current target was to provide barebox and openocd support.
- ar2313 is already upstream on barebox.
- ar2315-2318 (barebox) awaiting review by Anthony Pavlov.
- openocd (EJTAG) support is ready and i'll push it ASUP.

I hope Jonathan do kernel part. If not, i can provide some work, since i
have testing boards and expiriance on this hardware.

-- 
Regards,
Oleksij


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 278 bytes --]

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Oleksij Rempel]

[-- Attachment #1: Type: text/plain, Size: 1621 bytes --]

Am 10.02.2014 13:05, schrieb Sergey Ryazanov:
> 2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
>> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
>>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>>>> The symbol is an orphan, get rid of it.
>>>>
>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>>> ---
>>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>>>
>>>
>>> This code is used in OpenWrt with an out of tree arch code for the
>>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
>>> this code to mainline Linux kernel, because of lack of time/interest.
>>
>> Sorry, we don't maintain out of tree code.
>>
> 
> Oleksij, Jonathan do you still working to make ar231x devices work
> with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
> team would like to add upstream support?
> 
> 1. https://lkml.org/lkml/2013/5/13/321
> 2. https://lkml.org/lkml/2013/5/13/358
> 

Hi,
my current target was to provide barebox and openocd support.
- ar2313 is already upstream on barebox.
- ar2315-2318 (barebox) awaiting review by Anthony Pavlov.
- openocd (EJTAG) support is ready and i'll push it ASUP.

I hope Jonathan do kernel part. If not, i can provide some work, since i
have testing boards and expiriance on this hardware.

-- 
Regards,
Oleksij


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 278 bytes --]

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

2014-02-10 16:17 GMT+04:00 Oleksij Rempel <linux@rempel-privat.de>:
> Am 10.02.2014 13:05, schrieb Sergey Ryazanov:
>> 2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
>>> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
>>>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>>>>> The symbol is an orphan, get rid of it.
>>>>>
>>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>>>> ---
>>>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>>>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>>>>
>>>>
>>>> This code is used in OpenWrt with an out of tree arch code for the
>>>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
>>>> this code to mainline Linux kernel, because of lack of time/interest.
>>>
>>> Sorry, we don't maintain out of tree code.
>>>
>>
>> Oleksij, Jonathan do you still working to make ar231x devices work
>> with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
>> team would like to add upstream support?
>>
>> 1. https://lkml.org/lkml/2013/5/13/321
>> 2. https://lkml.org/lkml/2013/5/13/358
>>
>
> Hi,
> my current target was to provide barebox and openocd support.
> - ar2313 is already upstream on barebox.
> - ar2315-2318 (barebox) awaiting review by Anthony Pavlov.
> - openocd (EJTAG) support is ready and i'll push it ASUP.
>
WOW, Impressive.

> I hope Jonathan do kernel part. If not, i can provide some work, since i
> have testing boards and expiriance on this hardware.
>
If you need, I can test kernel part, or even do some porting work. I
have some AR231x based boards, e.g. Ubnt LS2 and NS2.

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

2014-02-10 16:17 GMT+04:00 Oleksij Rempel <linux@rempel-privat.de>:
> Am 10.02.2014 13:05, schrieb Sergey Ryazanov:
>> 2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
>>> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
>>>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>>>>> The symbol is an orphan, get rid of it.
>>>>>
>>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>>>> ---
>>>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>>>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>>>>
>>>>
>>>> This code is used in OpenWrt with an out of tree arch code for the
>>>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
>>>> this code to mainline Linux kernel, because of lack of time/interest.
>>>
>>> Sorry, we don't maintain out of tree code.
>>>
>>
>> Oleksij, Jonathan do you still working to make ar231x devices work
>> with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
>> team would like to add upstream support?
>>
>> 1. https://lkml.org/lkml/2013/5/13/321
>> 2. https://lkml.org/lkml/2013/5/13/358
>>
>
> Hi,
> my current target was to provide barebox and openocd support.
> - ar2313 is already upstream on barebox.
> - ar2315-2318 (barebox) awaiting review by Anthony Pavlov.
> - openocd (EJTAG) support is ready and i'll push it ASUP.
>
WOW, Impressive.

> I hope Jonathan do kernel part. If not, i can provide some work, since i
> have testing boards and expiriance on this hardware.
>
If you need, I can test kernel part, or even do some porting work. I
have some AR231x based boards, e.g. Ubnt LS2 and NS2.

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Florian Fainelli]

2014-02-10 4:38 GMT-08:00 Sergey Ryazanov <ryazanov.s.a@gmail.com>:
> 2014-02-10 16:17 GMT+04:00 Oleksij Rempel <linux@rempel-privat.de>:
>> Am 10.02.2014 13:05, schrieb Sergey Ryazanov:
>>> 2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
>>>> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
>>>>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>>>>>> The symbol is an orphan, get rid of it.
>>>>>>
>>>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>>>>> ---
>>>>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>>>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>>>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>>>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>>>>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>>>>>
>>>>>
>>>>> This code is used in OpenWrt with an out of tree arch code for the
>>>>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
>>>>> this code to mainline Linux kernel, because of lack of time/interest.
>>>>
>>>> Sorry, we don't maintain out of tree code.
>>>>
>>>
>>> Oleksij, Jonathan do you still working to make ar231x devices work
>>> with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
>>> team would like to add upstream support?
>>>
>>> 1. https://lkml.org/lkml/2013/5/13/321
>>> 2. https://lkml.org/lkml/2013/5/13/358
>>>
>>
>> Hi,
>> my current target was to provide barebox and openocd support.
>> - ar2313 is already upstream on barebox.
>> - ar2315-2318 (barebox) awaiting review by Anthony Pavlov.
>> - openocd (EJTAG) support is ready and i'll push it ASUP.
>>
> WOW, Impressive.

That's a nice toy project, although since there are is an existing
bootloader with sources, I would have shifted the priority towards
getting the kernel support merged such that the bootloader can be used
for something. BTW I sent a few devices to Jonathan, not sure if he
ever got those...

>
>> I hope Jonathan do kernel part. If not, i can provide some work, since i
>> have testing boards and expiriance on this hardware.
>>
> If you need, I can test kernel part, or even do some porting work. I
> have some AR231x based boards, e.g. Ubnt LS2 and NS2.

I guess you could start splitting the OpenWrt patches into a format
that makes them suitable for being merged upstream and starting with
the MIPS parts. There might be a bunch of checkpatch.pl cleanup work
to do before getting those submitted.
-- 
Florian

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Florian Fainelli]

2014-02-10 4:38 GMT-08:00 Sergey Ryazanov <ryazanov.s.a@gmail.com>:
> 2014-02-10 16:17 GMT+04:00 Oleksij Rempel <linux@rempel-privat.de>:
>> Am 10.02.2014 13:05, schrieb Sergey Ryazanov:
>>> 2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
>>>> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
>>>>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>>>>>> The symbol is an orphan, get rid of it.
>>>>>>
>>>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>>>>> ---
>>>>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>>>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>>>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>>>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>>>>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>>>>>
>>>>>
>>>>> This code is used in OpenWrt with an out of tree arch code for the
>>>>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
>>>>> this code to mainline Linux kernel, because of lack of time/interest.
>>>>
>>>> Sorry, we don't maintain out of tree code.
>>>>
>>>
>>> Oleksij, Jonathan do you still working to make ar231x devices work
>>> with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
>>> team would like to add upstream support?
>>>
>>> 1. https://lkml.org/lkml/2013/5/13/321
>>> 2. https://lkml.org/lkml/2013/5/13/358
>>>
>>
>> Hi,
>> my current target was to provide barebox and openocd support.
>> - ar2313 is already upstream on barebox.
>> - ar2315-2318 (barebox) awaiting review by Anthony Pavlov.
>> - openocd (EJTAG) support is ready and i'll push it ASUP.
>>
> WOW, Impressive.

That's a nice toy project, although since there are is an existing
bootloader with sources, I would have shifted the priority towards
getting the kernel support merged such that the bootloader can be used
for something. BTW I sent a few devices to Jonathan, not sure if he
ever got those...

>
>> I hope Jonathan do kernel part. If not, i can provide some work, since i
>> have testing boards and expiriance on this hardware.
>>
> If you need, I can test kernel part, or even do some porting work. I
> have some AR231x based boards, e.g. Ubnt LS2 and NS2.

I guess you could start splitting the OpenWrt patches into a format
that makes them suitable for being merged upstream and starting with
the MIPS parts. There might be a bunch of checkpatch.pl cleanup work
to do before getting those submitted.
-- 
Florian

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

2014-02-11 2:37 GMT+04:00 Florian Fainelli <florian@openwrt.org>:
> 2014-02-10 4:38 GMT-08:00 Sergey Ryazanov <ryazanov.s.a@gmail.com>:
>> 2014-02-10 16:17 GMT+04:00 Oleksij Rempel <linux@rempel-privat.de>:
>>> Am 10.02.2014 13:05, schrieb Sergey Ryazanov:
>>>> 2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
>>>>> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
>>>>>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>>>>>>> The symbol is an orphan, get rid of it.
>>>>>>>
>>>>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>>>>>> ---
>>>>>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>>>>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>>>>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>>>>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>>>>>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>>>>>>
>>>>>>
>>>>>> This code is used in OpenWrt with an out of tree arch code for the
>>>>>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
>>>>>> this code to mainline Linux kernel, because of lack of time/interest.
>>>>>
>>>>> Sorry, we don't maintain out of tree code.
>>>>>
>>>>
>>>> Oleksij, Jonathan do you still working to make ar231x devices work
>>>> with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
>>>> team would like to add upstream support?
>>>>
>>>> 1. https://lkml.org/lkml/2013/5/13/321
>>>> 2. https://lkml.org/lkml/2013/5/13/358
>>>>
>>>
>>> Hi,
>>> my current target was to provide barebox and openocd support.
>>> - ar2313 is already upstream on barebox.
>>> - ar2315-2318 (barebox) awaiting review by Anthony Pavlov.
>>> - openocd (EJTAG) support is ready and i'll push it ASUP.
>>>
>> WOW, Impressive.
>
> That's a nice toy project, although since there are is an existing
> bootloader with sources, I would have shifted the priority towards
> getting the kernel support merged such that the bootloader can be used
> for something. BTW I sent a few devices to Jonathan, not sure if he
> ever got those...
>
>>
>>> I hope Jonathan do kernel part. If not, i can provide some work, since i
>>> have testing boards and expiriance on this hardware.
>>>
>> If you need, I can test kernel part, or even do some porting work. I
>> have some AR231x based boards, e.g. Ubnt LS2 and NS2.
>
> I guess you could start splitting the OpenWrt patches into a format
> that makes them suitable for being merged upstream and starting with
> the MIPS parts. There might be a bunch of checkpatch.pl cleanup work
> to do before getting those submitted.

I will do that if Jonathan does not have a working solution, which he
would like to push upstream. So, let's wait for his reply.

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

2014-02-11 2:37 GMT+04:00 Florian Fainelli <florian@openwrt.org>:
> 2014-02-10 4:38 GMT-08:00 Sergey Ryazanov <ryazanov.s.a@gmail.com>:
>> 2014-02-10 16:17 GMT+04:00 Oleksij Rempel <linux@rempel-privat.de>:
>>> Am 10.02.2014 13:05, schrieb Sergey Ryazanov:
>>>> 2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
>>>>> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
>>>>>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>>>>>>> The symbol is an orphan, get rid of it.
>>>>>>>
>>>>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>>>>>> ---
>>>>>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>>>>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>>>>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>>>>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>>>>>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>>>>>>
>>>>>>
>>>>>> This code is used in OpenWrt with an out of tree arch code for the
>>>>>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
>>>>>> this code to mainline Linux kernel, because of lack of time/interest.
>>>>>
>>>>> Sorry, we don't maintain out of tree code.
>>>>>
>>>>
>>>> Oleksij, Jonathan do you still working to make ar231x devices work
>>>> with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
>>>> team would like to add upstream support?
>>>>
>>>> 1. https://lkml.org/lkml/2013/5/13/321
>>>> 2. https://lkml.org/lkml/2013/5/13/358
>>>>
>>>
>>> Hi,
>>> my current target was to provide barebox and openocd support.
>>> - ar2313 is already upstream on barebox.
>>> - ar2315-2318 (barebox) awaiting review by Anthony Pavlov.
>>> - openocd (EJTAG) support is ready and i'll push it ASUP.
>>>
>> WOW, Impressive.
>
> That's a nice toy project, although since there are is an existing
> bootloader with sources, I would have shifted the priority towards
> getting the kernel support merged such that the bootloader can be used
> for something. BTW I sent a few devices to Jonathan, not sure if he
> ever got those...
>
>>
>>> I hope Jonathan do kernel part. If not, i can provide some work, since i
>>> have testing boards and expiriance on this hardware.
>>>
>> If you need, I can test kernel part, or even do some porting work. I
>> have some AR231x based boards, e.g. Ubnt LS2 and NS2.
>
> I guess you could start splitting the OpenWrt patches into a format
> that makes them suitable for being merged upstream and starting with
> the MIPS parts. There might be a bunch of checkpatch.pl cleanup work
> to do before getting those submitted.

I will do that if Jonathan does not have a working solution, which he
would like to push upstream. So, let's wait for his reply.

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

2014-02-11 3:43 GMT+04:00 Sergey Ryazanov <ryazanov.s.a@gmail.com>:
> 2014-02-11 2:37 GMT+04:00 Florian Fainelli <florian@openwrt.org>:
>> 2014-02-10 4:38 GMT-08:00 Sergey Ryazanov <ryazanov.s.a@gmail.com>:
>>> 2014-02-10 16:17 GMT+04:00 Oleksij Rempel <linux@rempel-privat.de>:
>>>> Am 10.02.2014 13:05, schrieb Sergey Ryazanov:
>>>>> 2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
>>>>>> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
>>>>>>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>>>>>>>> The symbol is an orphan, get rid of it.
>>>>>>>>
>>>>>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>>>>>>> ---
>>>>>>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>>>>>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>>>>>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>>>>>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>>>>>>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>>>>>>>
>>>>>>>
>>>>>>> This code is used in OpenWrt with an out of tree arch code for the
>>>>>>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
>>>>>>> this code to mainline Linux kernel, because of lack of time/interest.
>>>>>>
>>>>>> Sorry, we don't maintain out of tree code.
>>>>>>
>>>>>
>>>>> Oleksij, Jonathan do you still working to make ar231x devices work
>>>>> with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
>>>>> team would like to add upstream support?
>>>>>
>>>>> 1. https://lkml.org/lkml/2013/5/13/321
>>>>> 2. https://lkml.org/lkml/2013/5/13/358
>>>>>
>>>>
>>>> Hi,
>>>> my current target was to provide barebox and openocd support.
>>>> - ar2313 is already upstream on barebox.
>>>> - ar2315-2318 (barebox) awaiting review by Anthony Pavlov.
>>>> - openocd (EJTAG) support is ready and i'll push it ASUP.
>>>>
>>> WOW, Impressive.
>>
>> That's a nice toy project, although since there are is an existing
>> bootloader with sources, I would have shifted the priority towards
>> getting the kernel support merged such that the bootloader can be used
>> for something. BTW I sent a few devices to Jonathan, not sure if he
>> ever got those...
>>
>>>
>>>> I hope Jonathan do kernel part. If not, i can provide some work, since i
>>>> have testing boards and expiriance on this hardware.
>>>>
>>> If you need, I can test kernel part, or even do some porting work. I
>>> have some AR231x based boards, e.g. Ubnt LS2 and NS2.
>>
>> I guess you could start splitting the OpenWrt patches into a format
>> that makes them suitable for being merged upstream and starting with
>> the MIPS parts. There might be a bunch of checkpatch.pl cleanup work
>> to do before getting those submitted.
>
> I will do that if Jonathan does not have a working solution, which he
> would like to push upstream. So, let's wait for his reply.
>

John, can you delay the merging of this patch for a few months, I will
try to prepare the necessary patches to add AR231x architecture to the
kernel and send them to linux-mips.

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

2014-02-11 3:43 GMT+04:00 Sergey Ryazanov <ryazanov.s.a@gmail.com>:
> 2014-02-11 2:37 GMT+04:00 Florian Fainelli <florian@openwrt.org>:
>> 2014-02-10 4:38 GMT-08:00 Sergey Ryazanov <ryazanov.s.a@gmail.com>:
>>> 2014-02-10 16:17 GMT+04:00 Oleksij Rempel <linux@rempel-privat.de>:
>>>> Am 10.02.2014 13:05, schrieb Sergey Ryazanov:
>>>>> 2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
>>>>>> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
>>>>>>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>>>>>>>> The symbol is an orphan, get rid of it.
>>>>>>>>
>>>>>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>>>>>>> ---
>>>>>>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
>>>>>>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
>>>>>>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
>>>>>>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
>>>>>>>>  4 files changed, 5 insertions(+), 54 deletions(-)
>>>>>>>>
>>>>>>>
>>>>>>> This code is used in OpenWrt with an out of tree arch code for the
>>>>>>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
>>>>>>> this code to mainline Linux kernel, because of lack of time/interest.
>>>>>>
>>>>>> Sorry, we don't maintain out of tree code.
>>>>>>
>>>>>
>>>>> Oleksij, Jonathan do you still working to make ar231x devices work
>>>>> with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
>>>>> team would like to add upstream support?
>>>>>
>>>>> 1. https://lkml.org/lkml/2013/5/13/321
>>>>> 2. https://lkml.org/lkml/2013/5/13/358
>>>>>
>>>>
>>>> Hi,
>>>> my current target was to provide barebox and openocd support.
>>>> - ar2313 is already upstream on barebox.
>>>> - ar2315-2318 (barebox) awaiting review by Anthony Pavlov.
>>>> - openocd (EJTAG) support is ready and i'll push it ASUP.
>>>>
>>> WOW, Impressive.
>>
>> That's a nice toy project, although since there are is an existing
>> bootloader with sources, I would have shifted the priority towards
>> getting the kernel support merged such that the bootloader can be used
>> for something. BTW I sent a few devices to Jonathan, not sure if he
>> ever got those...
>>
>>>
>>>> I hope Jonathan do kernel part. If not, i can provide some work, since i
>>>> have testing boards and expiriance on this hardware.
>>>>
>>> If you need, I can test kernel part, or even do some porting work. I
>>> have some AR231x based boards, e.g. Ubnt LS2 and NS2.
>>
>> I guess you could start splitting the OpenWrt patches into a format
>> that makes them suitable for being merged upstream and starting with
>> the MIPS parts. There might be a bunch of checkpatch.pl cleanup work
>> to do before getting those submitted.
>
> I will do that if Jonathan does not have a working solution, which he
> would like to push upstream. So, let's wait for his reply.
>

John, can you delay the merging of this patch for a few months, I will
try to prepare the necessary patches to add AR231x architecture to the
kernel and send them to linux-mips.

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[John W. Linville]

On Wed, Feb 12, 2014 at 02:50:30PM +0400, Sergey Ryazanov wrote:
> 2014-02-11 3:43 GMT+04:00 Sergey Ryazanov <ryazanov.s.a@gmail.com>:
> > 2014-02-11 2:37 GMT+04:00 Florian Fainelli <florian@openwrt.org>:
> >> 2014-02-10 4:38 GMT-08:00 Sergey Ryazanov <ryazanov.s.a@gmail.com>:
> >>> 2014-02-10 16:17 GMT+04:00 Oleksij Rempel <linux@rempel-privat.de>:
> >>>> Am 10.02.2014 13:05, schrieb Sergey Ryazanov:
> >>>>> 2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard@nod.at>:
> >>>>>> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
> >>>>>>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
> >>>>>>>> The symbol is an orphan, get rid of it.
> >>>>>>>>
> >>>>>>>> Signed-off-by: Richard Weinberger <richard@nod.at>
> >>>>>>>> ---
> >>>>>>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
> >>>>>>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
> >>>>>>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
> >>>>>>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
> >>>>>>>>  4 files changed, 5 insertions(+), 54 deletions(-)
> >>>>>>>>
> >>>>>>>
> >>>>>>> This code is used in OpenWrt with an out of tree arch code for the
> >>>>>>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
> >>>>>>> this code to mainline Linux kernel, because of lack of time/interest.
> >>>>>>
> >>>>>> Sorry, we don't maintain out of tree code.
> >>>>>>
> >>>>>
> >>>>> Oleksij, Jonathan do you still working to make ar231x devices work
> >>>>> with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
> >>>>> team would like to add upstream support?
> >>>>>
> >>>>> 1. https://lkml.org/lkml/2013/5/13/321
> >>>>> 2. https://lkml.org/lkml/2013/5/13/358
> >>>>>
> >>>>
> >>>> Hi,
> >>>> my current target was to provide barebox and openocd support.
> >>>> - ar2313 is already upstream on barebox.
> >>>> - ar2315-2318 (barebox) awaiting review by Anthony Pavlov.
> >>>> - openocd (EJTAG) support is ready and i'll push it ASUP.
> >>>>
> >>> WOW, Impressive.
> >>
> >> That's a nice toy project, although since there are is an existing
> >> bootloader with sources, I would have shifted the priority towards
> >> getting the kernel support merged such that the bootloader can be used
> >> for something. BTW I sent a few devices to Jonathan, not sure if he
> >> ever got those...
> >>
> >>>
> >>>> I hope Jonathan do kernel part. If not, i can provide some work, since i
> >>>> have testing boards and expiriance on this hardware.
> >>>>
> >>> If you need, I can test kernel part, or even do some porting work. I
> >>> have some AR231x based boards, e.g. Ubnt LS2 and NS2.
> >>
> >> I guess you could start splitting the OpenWrt patches into a format
> >> that makes them suitable for being merged upstream and starting with
> >> the MIPS parts. There might be a bunch of checkpatch.pl cleanup work
> >> to do before getting those submitted.
> >
> > I will do that if Jonathan does not have a working solution, which he
> > would like to push upstream. So, let's wait for his reply.
> >
> 
> John, can you delay the merging of this patch for a few months, I will
> try to prepare the necessary patches to add AR231x architecture to the
> kernel and send them to linux-mips.

OK -- looking forward to your patches.

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[John W. Linville]

On Wed, Feb 12, 2014 at 02:50:30PM +0400, Sergey Ryazanov wrote:
> 2014-02-11 3:43 GMT+04:00 Sergey Ryazanov <ryazanov.s.a-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
> > 2014-02-11 2:37 GMT+04:00 Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>:
> >> 2014-02-10 4:38 GMT-08:00 Sergey Ryazanov <ryazanov.s.a-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:
> >>> 2014-02-10 16:17 GMT+04:00 Oleksij Rempel <linux-YEK0n+YFykbzxQdaRaTXBw@public.gmane.org>:
> >>>> Am 10.02.2014 13:05, schrieb Sergey Ryazanov:
> >>>>> 2014-02-10 0:03 GMT+04:00 Richard Weinberger <richard-/L3Ra7n9ekc@public.gmane.org>:
> >>>>>> Am 09.02.2014 20:18, schrieb Hauke Mehrtens:
> >>>>>>> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
> >>>>>>>> The symbol is an orphan, get rid of it.
> >>>>>>>>
> >>>>>>>> Signed-off-by: Richard Weinberger <richard-/L3Ra7n9ekc@public.gmane.org>
> >>>>>>>> ---
> >>>>>>>>  drivers/net/wireless/ath/ath5k/Kconfig | 10 +++++-----
> >>>>>>>>  drivers/net/wireless/ath/ath5k/ath5k.h | 28 ----------------------------
> >>>>>>>>  drivers/net/wireless/ath/ath5k/base.c  | 14 --------------
> >>>>>>>>  drivers/net/wireless/ath/ath5k/led.c   |  7 -------
> >>>>>>>>  4 files changed, 5 insertions(+), 54 deletions(-)
> >>>>>>>>
> >>>>>>>
> >>>>>>> This code is used in OpenWrt with an out of tree arch code for the
> >>>>>>> Atheros 231x/531x SoC. [0] I do not think anyone is working on adding
> >>>>>>> this code to mainline Linux kernel, because of lack of time/interest.
> >>>>>>
> >>>>>> Sorry, we don't maintain out of tree code.
> >>>>>>
> >>>>>
> >>>>> Oleksij, Jonathan do you still working to make ar231x devices work
> >>>>> with upstream, since your posts [1, 2]? Or may be someone from OpenWRT
> >>>>> team would like to add upstream support?
> >>>>>
> >>>>> 1. https://lkml.org/lkml/2013/5/13/321
> >>>>> 2. https://lkml.org/lkml/2013/5/13/358
> >>>>>
> >>>>
> >>>> Hi,
> >>>> my current target was to provide barebox and openocd support.
> >>>> - ar2313 is already upstream on barebox.
> >>>> - ar2315-2318 (barebox) awaiting review by Anthony Pavlov.
> >>>> - openocd (EJTAG) support is ready and i'll push it ASUP.
> >>>>
> >>> WOW, Impressive.
> >>
> >> That's a nice toy project, although since there are is an existing
> >> bootloader with sources, I would have shifted the priority towards
> >> getting the kernel support merged such that the bootloader can be used
> >> for something. BTW I sent a few devices to Jonathan, not sure if he
> >> ever got those...
> >>
> >>>
> >>>> I hope Jonathan do kernel part. If not, i can provide some work, since i
> >>>> have testing boards and expiriance on this hardware.
> >>>>
> >>> If you need, I can test kernel part, or even do some porting work. I
> >>> have some AR231x based boards, e.g. Ubnt LS2 and NS2.
> >>
> >> I guess you could start splitting the OpenWrt patches into a format
> >> that makes them suitable for being merged upstream and starting with
> >> the MIPS parts. There might be a bunch of checkpatch.pl cleanup work
> >> to do before getting those submitted.
> >
> > I will do that if Jonathan does not have a working solution, which he
> > would like to push upstream. So, let's wait for his reply.
> >
> 
> John, can you delay the merging of this patch for a few months, I will
> try to prepare the necessary patches to add AR231x architecture to the
> kernel and send them to linux-mips.

OK -- looking forward to your patches.

-- 
John W. Linville		Someday the world will need a hero, and you
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org			might be all we have.  Be ready.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Paul Bolle]

On Thu, 2014-02-13 at 15:14 -0500, John W. Linville wrote:
> On Wed, Feb 12, 2014 at 02:50:30PM +0400, Sergey Ryazanov wrote:
> > John, can you delay the merging of this patch for a few months, I will
> > try to prepare the necessary patches to add AR231x architecture to the
> > kernel and send them to linux-mips.
> 
> OK -- looking forward to your patches.

So am I. Is there any news on this front?


Paul Bolle

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

2014-04-15 21:08 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
> On Thu, 2014-02-13 at 15:14 -0500, John W. Linville wrote:
>> On Wed, Feb 12, 2014 at 02:50:30PM +0400, Sergey Ryazanov wrote:
>> > John, can you delay the merging of this patch for a few months, I will
>> > try to prepare the necessary patches to add AR231x architecture to the
>> > kernel and send them to linux-mips.
>>
>> OK -- looking forward to your patches.
>
> So am I. Is there any news on this front?
>

Work still in progress :(

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Paul Bolle]

Jiri, Nick, Luis, John,

On Wed, 2014-04-16 at 13:20 +0400, Sergey Ryazanov wrote:
> 2014-04-15 21:08 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
> > On Thu, 2014-02-13 at 15:14 -0500, John W. Linville wrote:
> >> On Wed, Feb 12, 2014 at 02:50:30PM +0400, Sergey Ryazanov wrote:
> >> > John, can you delay the merging of this patch for a few months, I will
> >> > try to prepare the necessary patches to add AR231x architecture to the
> >> > kernel and send them to linux-mips.
> >>
> >> OK -- looking forward to your patches.
> >
> > So am I. Is there any news on this front?
> >
> 
> Work still in progress :(

ATHEROS_AR231X and the things depending on it, like AHB bus support,
have been discussed for three years now. When will you (re)consider a
patch to remove all currently dead code?

And to state the obvious: AHB bus support, and the other code depending
on ATHEROS_AR231X, can always be re-added once ATHEROS_AR231X gets added
to the tree.


Paul Bolle

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

Hi Paul,

2014-06-18 14:25 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
> Jiri, Nick, Luis, John,
>
> On Wed, 2014-04-16 at 13:20 +0400, Sergey Ryazanov wrote:
>> 2014-04-15 21:08 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
>> > On Thu, 2014-02-13 at 15:14 -0500, John W. Linville wrote:
>> >> On Wed, Feb 12, 2014 at 02:50:30PM +0400, Sergey Ryazanov wrote:
>> >> > John, can you delay the merging of this patch for a few months, I will
>> >> > try to prepare the necessary patches to add AR231x architecture to the
>> >> > kernel and send them to linux-mips.
>> >>
>> >> OK -- looking forward to your patches.
>> >
>> > So am I. Is there any news on this front?
>> >
>>
>> Work still in progress :(
>
> ATHEROS_AR231X and the things depending on it, like AHB bus support,
> have been discussed for three years now. When will you (re)consider a
> patch to remove all currently dead code?
>
> And to state the obvious: AHB bus support, and the other code depending
> on ATHEROS_AR231X, can always be re-added once ATHEROS_AR231X gets added
> to the tree.
>

Work in progress, I don't stop it. Just work is progressing slower
than I had planned. I am already cleanup the code (mostly checkpatch
errors and warnings) and send patches to OpenWRT tree. Further I plan
to simplify initialization and I will be ready to send patches
upstream.

I need a couple of weeks for this. Is its reasonable time to not make
a mess of remove/add commits?

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

Hi Paul,

2014-06-18 14:25 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
> Jiri, Nick, Luis, John,
>
> On Wed, 2014-04-16 at 13:20 +0400, Sergey Ryazanov wrote:
>> 2014-04-15 21:08 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
>> > On Thu, 2014-02-13 at 15:14 -0500, John W. Linville wrote:
>> >> On Wed, Feb 12, 2014 at 02:50:30PM +0400, Sergey Ryazanov wrote:
>> >> > John, can you delay the merging of this patch for a few months, I will
>> >> > try to prepare the necessary patches to add AR231x architecture to the
>> >> > kernel and send them to linux-mips.
>> >>
>> >> OK -- looking forward to your patches.
>> >
>> > So am I. Is there any news on this front?
>> >
>>
>> Work still in progress :(
>
> ATHEROS_AR231X and the things depending on it, like AHB bus support,
> have been discussed for three years now. When will you (re)consider a
> patch to remove all currently dead code?
>
> And to state the obvious: AHB bus support, and the other code depending
> on ATHEROS_AR231X, can always be re-added once ATHEROS_AR231X gets added
> to the tree.
>

Work in progress, I don't stop it. Just work is progressing slower
than I had planned. I am already cleanup the code (mostly checkpatch
errors and warnings) and send patches to OpenWRT tree. Further I plan
to simplify initialization and I will be ready to send patches
upstream.

I need a couple of weeks for this. Is its reasonable time to not make
a mess of remove/add commits?

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Paul Bolle]

Hi Sergey,

On Wed, 2014-06-18 at 15:10 +0400, Sergey Ryazanov wrote:
> 2014-06-18 14:25 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
> > ATHEROS_AR231X and the things depending on it, like AHB bus support,
> > have been discussed for three years now. When will you (re)consider a
> > patch to remove all currently dead code?
> >
> > And to state the obvious: AHB bus support, and the other code depending
> > on ATHEROS_AR231X, can always be re-added once ATHEROS_AR231X gets added
> > to the tree.
> 
> Work in progress, I don't stop it. Just work is progressing slower
> than I had planned. I am already cleanup the code (mostly checkpatch
> errors and warnings) and send patches to OpenWRT tree. Further I plan
> to simplify initialization and I will be ready to send patches
> upstream.

That's good to hear.

> I need a couple of weeks for this. Is its reasonable time to not make
> a mess of remove/add commits?

Removing the code just to re-add it shortly after would indeed be
awkward.

Having this conversation every rc1 is getting a bit silly. Could Jiri
e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
submitted?

Thanks,


Paul Bolle

Re: [ath5k-devel] [PATCH 09/28] Remove ATHEROS_AR231X

[Holger Schurig]

> Having this conversation every rc1 is getting a bit silly.

Hmm, wouldn't the obvious thing than to add the driver in it's current
form into staging?  Is it well-separated from the rest of  Atheros
WLAN drivers ?

Re: [ath5k-devel] [PATCH 09/28] Remove ATHEROS_AR231X

[Holger Schurig]

> Having this conversation every rc1 is getting a bit silly.

Hmm, wouldn't the obvious thing than to add the driver in it's current
form into staging?  Is it well-separated from the rest of  Atheros
WLAN drivers ?
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [ath5k-devel] [PATCH 09/28] Remove ATHEROS_AR231X

[Paul Bolle]

On Wed, 2014-06-18 at 15:15 +0200, Holger Schurig wrote:
> Hmm, wouldn't the obvious thing than to add the driver in it's current
> form into staging?  Is it well-separated from the rest of  Atheros
> WLAN drivers ?

A quick glance at the code shows an include of ar231x_platform.h (which
doesn't exist) and uses of struct ar231x_board_config (ditto). So it
won't build as is and therefor needs work to qualify for staging.


Paul Bolle

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Paul Bolle]

Jiri, Nick, Luis, John,

On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
> Having this conversation every rc1 is getting a bit silly. Could Jiri
> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
> submitted?

I waited until rc3. Have you seen any activity on this front? If not,
should I resend the patch that removes the code in mainline that depends
on ATHEROS_AR231X (ie, AHB bus support)?

And to repeat the obvious: the removed code can always be re-added once
ATHEROS_AR231X gets actually added to the tree.

Thanks,


Paul Bolle

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

Hello Paul,

2014-09-05 14:10 GMT+04:00, Paul Bolle <pebolle@tiscali.nl>:
> Jiri, Nick, Luis, John,
>
> On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
>> Having this conversation every rc1 is getting a bit silly. Could Jiri
>> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
>> submitted?
>
> I waited until rc3. Have you seen any activity on this front? If not,
> should I resend the patch that removes the code in mainline that depends
> on ATHEROS_AR231X (ie, AHB bus support)?
>
Recent activity always could be found in [1]. Now I finish another one
round of cleanups and have a plan to fix several things (you can
always find something that you really want to improve). But if you
insist I could immediately switch to "send upstream" mode. And seems
that this would be better approach.

1. https://dev.openwrt.org/log/trunk/target/linux/atheros

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

Hello Paul,

2014-09-05 14:10 GMT+04:00, Paul Bolle <pebolle@tiscali.nl>:
> Jiri, Nick, Luis, John,
>
> On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
>> Having this conversation every rc1 is getting a bit silly. Could Jiri
>> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
>> submitted?
>
> I waited until rc3. Have you seen any activity on this front? If not,
> should I resend the patch that removes the code in mainline that depends
> on ATHEROS_AR231X (ie, AHB bus support)?
>
Recent activity always could be found in [1]. Now I finish another one
round of cleanups and have a plan to fix several things (you can
always find something that you really want to improve). But if you
insist I could immediately switch to "send upstream" mode. And seems
that this would be better approach.

1. https://dev.openwrt.org/log/trunk/target/linux/atheros

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Paul Bolle]

Hi Sergey,

On Fri, 2014-09-05 at 15:12 +0400, Sergey Ryazanov wrote:
> 2014-09-05 14:10 GMT+04:00, Paul Bolle <pebolle@tiscali.nl>:
> > On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
> >> Having this conversation every rc1 is getting a bit silly. Could Jiri
> >> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
> >> submitted?
> >
> > I waited until rc3. Have you seen any activity on this front? If not,
> > should I resend the patch that removes the code in mainline that depends
> > on ATHEROS_AR231X (ie, AHB bus support)?
> >
> Recent activity always could be found in [1]. Now I finish another one
> round of cleanups and have a plan to fix several things (you can
> always find something that you really want to improve). But if you
> insist I could immediately switch to "send upstream" mode. And seems
> that this would be better approach.
> 
> 1. https://dev.openwrt.org/log/trunk/target/linux/atheros

And where can the related PULL requests or patch submissions be found?


Paul Bolle

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Paul Bolle]

Hi Sergey,

On Fri, 2014-09-05 at 15:12 +0400, Sergey Ryazanov wrote:
> 2014-09-05 14:10 GMT+04:00, Paul Bolle <pebolle-IWqWACnzNjzz+pZb47iToQ@public.gmane.org>:
> > On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
> >> Having this conversation every rc1 is getting a bit silly. Could Jiri
> >> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
> >> submitted?
> >
> > I waited until rc3. Have you seen any activity on this front? If not,
> > should I resend the patch that removes the code in mainline that depends
> > on ATHEROS_AR231X (ie, AHB bus support)?
> >
> Recent activity always could be found in [1]. Now I finish another one
> round of cleanups and have a plan to fix several things (you can
> always find something that you really want to improve). But if you
> insist I could immediately switch to "send upstream" mode. And seems
> that this would be better approach.
> 
> 1. https://dev.openwrt.org/log/trunk/target/linux/atheros

And where can the related PULL requests or patch submissions be found?


Paul Bolle

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

2014-09-05 15:33 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
> Hi Sergey,
>
> On Fri, 2014-09-05 at 15:12 +0400, Sergey Ryazanov wrote:
>> 2014-09-05 14:10 GMT+04:00, Paul Bolle <pebolle@tiscali.nl>:
>> > On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
>> >> Having this conversation every rc1 is getting a bit silly. Could Jiri
>> >> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
>> >> submitted?
>> >
>> > I waited until rc3. Have you seen any activity on this front? If not,
>> > should I resend the patch that removes the code in mainline that depends
>> > on ATHEROS_AR231X (ie, AHB bus support)?
>> >
>> Recent activity always could be found in [1]. Now I finish another one
>> round of cleanups and have a plan to fix several things (you can
>> always find something that you really want to improve). But if you
>> insist I could immediately switch to "send upstream" mode. And seems
>> that this would be better approach.
>>
>> 1. https://dev.openwrt.org/log/trunk/target/linux/atheros
>
> And where can the related PULL requests or patch submissions be found?
>
I have not sent patches yet, since I thought that it would be easier
to cleanup them in openwrt tree and then send them upstream.

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[John W. Linville]

On Fri, Sep 05, 2014 at 04:02:10PM +0400, Sergey Ryazanov wrote:
> 2014-09-05 15:33 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
> > Hi Sergey,
> >
> > On Fri, 2014-09-05 at 15:12 +0400, Sergey Ryazanov wrote:
> >> 2014-09-05 14:10 GMT+04:00, Paul Bolle <pebolle@tiscali.nl>:
> >> > On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
> >> >> Having this conversation every rc1 is getting a bit silly. Could Jiri
> >> >> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
> >> >> submitted?
> >> >
> >> > I waited until rc3. Have you seen any activity on this front? If not,
> >> > should I resend the patch that removes the code in mainline that depends
> >> > on ATHEROS_AR231X (ie, AHB bus support)?
> >> >
> >> Recent activity always could be found in [1]. Now I finish another one
> >> round of cleanups and have a plan to fix several things (you can
> >> always find something that you really want to improve). But if you
> >> insist I could immediately switch to "send upstream" mode. And seems
> >> that this would be better approach.
> >>
> >> 1. https://dev.openwrt.org/log/trunk/target/linux/atheros
> >
> > And where can the related PULL requests or patch submissions be found?
> >
> I have not sent patches yet, since I thought that it would be easier
> to cleanup them in openwrt tree and then send them upstream.

That excuse has worn a bit thin.  Perhaps Paul should repost his
removal and you can add a revert to the start of your patch series?

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

[PATCH] [RESEND] ath5k: Remove AHB bus support

[Paul Bolle]

AHB bus support was added in v2.6.38, through commit a0b907ee2a71
("ath5k: Add AHB bus support."). That code can only be build if the
Kconfig symbol ATHEROS_AR231X is set. But that symbol has never been
added to the tree. So AHB bus support has always been dead code.

Let's remove all code that depends on ATHEROS_AR231X. If that symbol
ever gets added to the tree the AHB bus support can be re-added too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
First sent in https://lkml.org/lkml/2013/5/13/303 . Updated on top of
next-20140909.

Build tested only (no access to this hardware).

 drivers/net/wireless/ath/ath5k/Kconfig  |  14 +-
 drivers/net/wireless/ath/ath5k/Makefile |   1 -
 drivers/net/wireless/ath/ath5k/ahb.c    | 234 --------------------------------
 drivers/net/wireless/ath/ath5k/ath5k.h  |  28 ----
 drivers/net/wireless/ath/ath5k/base.c   |  14 --
 drivers/net/wireless/ath/ath5k/led.c    |   6 -
 6 files changed, 3 insertions(+), 294 deletions(-)
 delete mode 100644 drivers/net/wireless/ath/ath5k/ahb.c

diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index c9f81a388f15..93caf8e68901 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,13 +1,12 @@
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
-	depends on (PCI || ATHEROS_AR231X) && MAC80211
+	depends on PCI && MAC80211
 	select ATH_COMMON
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
 	select AVERAGE
-	select ATH5K_AHB if (ATHEROS_AR231X && !PCI)
-	select ATH5K_PCI if (!ATHEROS_AR231X && PCI)
+	select ATH5K_PCI
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros 5xxx chipset.
@@ -52,16 +51,9 @@ config ATH5K_TRACER
 
 	  If unsure, say N.
 
-config ATH5K_AHB
-	bool "Atheros 5xxx AHB bus support"
-	depends on (ATHEROS_AR231X && !PCI)
-	---help---
-	  This adds support for WiSoC type chipsets of the 5xxx Atheros
-	  family.
-
 config ATH5K_PCI
 	bool "Atheros 5xxx PCI bus support"
-	depends on (!ATHEROS_AR231X && PCI)
+	depends on PCI
 	---help---
 	  This adds support for PCI type chipsets of the 5xxx Atheros
 	  family.
diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile
index 1b3a34f7f224..51e2d8668041 100644
--- a/drivers/net/wireless/ath/ath5k/Makefile
+++ b/drivers/net/wireless/ath/ath5k/Makefile
@@ -17,6 +17,5 @@ ath5k-y				+= ani.o
 ath5k-y				+= sysfs.o
 ath5k-y				+= mac80211-ops.o
 ath5k-$(CONFIG_ATH5K_DEBUG)	+= debug.o
-ath5k-$(CONFIG_ATH5K_AHB)	+= ahb.o
 ath5k-$(CONFIG_ATH5K_PCI)	+= pci.o
 obj-$(CONFIG_ATH5K)		+= ath5k.o
diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c
deleted file mode 100644
index 79bffe165cab..000000000000
--- a/drivers/net/wireless/ath/ath5k/ahb.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Copyright (c) 2008-2009 Atheros Communications Inc.
- * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/nl80211.h>
-#include <linux/platform_device.h>
-#include <linux/etherdevice.h>
-#include <linux/export.h>
-#include <ar231x_platform.h>
-#include "ath5k.h"
-#include "debug.h"
-#include "base.h"
-#include "reg.h"
-
-/* return bus cachesize in 4B word units */
-static void ath5k_ahb_read_cachesize(struct ath_common *common, int *csz)
-{
-	*csz = L1_CACHE_BYTES >> 2;
-}
-
-static bool
-ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
-{
-	struct ath5k_hw *ah = common->priv;
-	struct platform_device *pdev = to_platform_device(ah->dev);
-	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
-	u16 *eeprom, *eeprom_end;
-
-	eeprom = (u16 *) bcfg->radio;
-	eeprom_end = ((void *) bcfg->config) + BOARD_CONFIG_BUFSZ;
-
-	eeprom += off;
-	if (eeprom > eeprom_end)
-		return false;
-
-	*data = *eeprom;
-	return true;
-}
-
-int ath5k_hw_read_srev(struct ath5k_hw *ah)
-{
-	struct platform_device *pdev = to_platform_device(ah->dev);
-	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
-	ah->ah_mac_srev = bcfg->devid;
-	return 0;
-}
-
-static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
-{
-	struct platform_device *pdev = to_platform_device(ah->dev);
-	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
-	u8 *cfg_mac;
-
-	if (to_platform_device(ah->dev)->id == 0)
-		cfg_mac = bcfg->config->wlan0_mac;
-	else
-		cfg_mac = bcfg->config->wlan1_mac;
-
-	memcpy(mac, cfg_mac, ETH_ALEN);
-	return 0;
-}
-
-static const struct ath_bus_ops ath_ahb_bus_ops = {
-	.ath_bus_type = ATH_AHB,
-	.read_cachesize = ath5k_ahb_read_cachesize,
-	.eeprom_read = ath5k_ahb_eeprom_read,
-	.eeprom_read_mac = ath5k_ahb_eeprom_read_mac,
-};
-
-/*Initialization*/
-static int ath_ahb_probe(struct platform_device *pdev)
-{
-	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
-	struct ath5k_hw *ah;
-	struct ieee80211_hw *hw;
-	struct resource *res;
-	void __iomem *mem;
-	int irq;
-	int ret = 0;
-	u32 reg;
-
-	if (!dev_get_platdata(&pdev->dev)) {
-		dev_err(&pdev->dev, "no platform data specified\n");
-		ret = -EINVAL;
-		goto err_out;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no memory resource found\n");
-		ret = -ENXIO;
-		goto err_out;
-	}
-
-	mem = ioremap_nocache(res->start, resource_size(res));
-	if (mem == NULL) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err_out;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no IRQ resource found\n");
-		ret = -ENXIO;
-		goto err_iounmap;
-	}
-
-	irq = res->start;
-
-	hw = ieee80211_alloc_hw(sizeof(struct ath5k_hw), &ath5k_hw_ops);
-	if (hw == NULL) {
-		dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
-		ret = -ENOMEM;
-		goto err_iounmap;
-	}
-
-	ah = hw->priv;
-	ah->hw = hw;
-	ah->dev = &pdev->dev;
-	ah->iobase = mem;
-	ah->irq = irq;
-	ah->devid = bcfg->devid;
-
-	if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
-		/* Enable WMAC AHB arbitration */
-		reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
-		reg |= AR5K_AR2315_AHB_ARB_CTL_WLAN;
-		iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
-
-		/* Enable global WMAC swapping */
-		reg = ioread32((void __iomem *) AR5K_AR2315_BYTESWAP);
-		reg |= AR5K_AR2315_BYTESWAP_WMAC;
-		iowrite32(reg, (void __iomem *) AR5K_AR2315_BYTESWAP);
-	} else {
-		/* Enable WMAC DMA access (assuming 5312 or 231x*/
-		/* TODO: check other platforms */
-		reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
-		if (to_platform_device(ah->dev)->id == 0)
-			reg |= AR5K_AR5312_ENABLE_WLAN0;
-		else
-			reg |= AR5K_AR5312_ENABLE_WLAN1;
-		iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
-
-		/*
-		 * On a dual-band AR5312, the multiband radio is only
-		 * used as pass-through. Disable 2 GHz support in the
-		 * driver for it
-		 */
-		if (to_platform_device(ah->dev)->id == 0 &&
-		    (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) ==
-		     (BD_WLAN1 | BD_WLAN0))
-			ah->ah_capabilities.cap_needs_2GHz_ovr = true;
-		else
-			ah->ah_capabilities.cap_needs_2GHz_ovr = false;
-	}
-
-	ret = ath5k_init_ah(ah, &ath_ahb_bus_ops);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
-		ret = -ENODEV;
-		goto err_free_hw;
-	}
-
-	platform_set_drvdata(pdev, hw);
-
-	return 0;
-
- err_free_hw:
-	ieee80211_free_hw(hw);
- err_iounmap:
-        iounmap(mem);
- err_out:
-	return ret;
-}
-
-static int ath_ahb_remove(struct platform_device *pdev)
-{
-	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
-	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
-	struct ath5k_hw *ah;
-	u32 reg;
-
-	if (!hw)
-		return 0;
-
-	ah = hw->priv;
-
-	if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
-		/* Disable WMAC AHB arbitration */
-		reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
-		reg &= ~AR5K_AR2315_AHB_ARB_CTL_WLAN;
-		iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
-	} else {
-		/*Stop DMA access */
-		reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
-		if (to_platform_device(ah->dev)->id == 0)
-			reg &= ~AR5K_AR5312_ENABLE_WLAN0;
-		else
-			reg &= ~AR5K_AR5312_ENABLE_WLAN1;
-		iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
-	}
-
-	ath5k_deinit_ah(ah);
-	iounmap(ah->iobase);
-	ieee80211_free_hw(hw);
-
-	return 0;
-}
-
-static struct platform_driver ath_ahb_driver = {
-	.probe      = ath_ahb_probe,
-	.remove     = ath_ahb_remove,
-	.driver		= {
-		.name	= "ar231x-wmac",
-		.owner	= THIS_MODULE,
-	},
-};
-
-module_platform_driver(ath_ahb_driver);
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 85316bb3f8c6..ed2468220216 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1647,32 +1647,6 @@ static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
 	return &(ath5k_hw_common(ah)->regulatory);
 }
 
-#ifdef CONFIG_ATHEROS_AR231X
-#define AR5K_AR2315_PCI_BASE	((void __iomem *)0xb0100000)
-
-static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
-{
-	/* On AR2315 and AR2317 the PCI clock domain registers
-	 * are outside of the WMAC register space */
-	if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
-	    (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
-		return AR5K_AR2315_PCI_BASE + reg;
-
-	return ah->iobase + reg;
-}
-
-static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
-{
-	return ioread32(ath5k_ahb_reg(ah, reg));
-}
-
-static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
-{
-	iowrite32(val, ath5k_ahb_reg(ah, reg));
-}
-
-#else
-
 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
 {
 	return ioread32(ah->iobase + reg);
@@ -1683,8 +1657,6 @@ static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
 	iowrite32(val, ah->iobase + reg);
 }
 
-#endif
-
 static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah)
 {
 	return ath5k_hw_common(ah)->bus_ops->ath_bus_type;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 59a87247aac4..a4a09bb8f2f3 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -99,15 +99,6 @@ static int ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan,
 
 /* Known SREVs */
 static const struct ath5k_srev_name srev_names[] = {
-#ifdef CONFIG_ATHEROS_AR231X
-	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R2 },
-	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R7 },
-	{ "2313",	AR5K_VERSION_MAC,	AR5K_SREV_AR2313_R8 },
-	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R6 },
-	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R7 },
-	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R1 },
-	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R2 },
-#else
 	{ "5210",	AR5K_VERSION_MAC,	AR5K_SREV_AR5210 },
 	{ "5311",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311 },
 	{ "5311A",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311A },
@@ -126,7 +117,6 @@ static const struct ath5k_srev_name srev_names[] = {
 	{ "5418",	AR5K_VERSION_MAC,	AR5K_SREV_AR5418 },
 	{ "2425",	AR5K_VERSION_MAC,	AR5K_SREV_AR2425 },
 	{ "2417",	AR5K_VERSION_MAC,	AR5K_SREV_AR2417 },
-#endif
 	{ "xxxxx",	AR5K_VERSION_MAC,	AR5K_SREV_UNKNOWN },
 	{ "5110",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5110 },
 	{ "5111",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5111 },
@@ -142,10 +132,6 @@ static const struct ath5k_srev_name srev_names[] = {
 	{ "5413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5413 },
 	{ "5424",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5424 },
 	{ "5133",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5133 },
-#ifdef CONFIG_ATHEROS_AR231X
-	{ "2316",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2316 },
-	{ "2317",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2317 },
-#endif
 	{ "xxxxx",	AR5K_VERSION_RAD,	AR5K_SREV_UNKNOWN },
 };
 
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index 2062d1190556..0beb7e7d6075 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -163,20 +163,14 @@ int ath5k_init_leds(struct ath5k_hw *ah)
 {
 	int ret = 0;
 	struct ieee80211_hw *hw = ah->hw;
-#ifndef CONFIG_ATHEROS_AR231X
 	struct pci_dev *pdev = ah->pdev;
-#endif
 	char name[ATH5K_LED_MAX_NAME_LEN + 1];
 	const struct pci_device_id *match;
 
 	if (!ah->pdev)
 		return 0;
 
-#ifdef CONFIG_ATHEROS_AR231X
-	match = NULL;
-#else
 	match = pci_match_id(&ath5k_led_devices[0], pdev);
-#endif
 	if (match) {
 		__set_bit(ATH_STAT_LEDSOFT, ah->status);
 		ah->led_pin = ATH_PIN(match->driver_data);
-- 
1.9.3

[PATCH] [RESEND] ath5k: Remove AHB bus support

[Paul Bolle]

AHB bus support was added in v2.6.38, through commit a0b907ee2a71
("ath5k: Add AHB bus support."). That code can only be build if the
Kconfig symbol ATHEROS_AR231X is set. But that symbol has never been
added to the tree. So AHB bus support has always been dead code.

Let's remove all code that depends on ATHEROS_AR231X. If that symbol
ever gets added to the tree the AHB bus support can be re-added too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
First sent in https://lkml.org/lkml/2013/5/13/303 . Updated on top of
next-20140909.

Build tested only (no access to this hardware).

 drivers/net/wireless/ath/ath5k/Kconfig  |  14 +-
 drivers/net/wireless/ath/ath5k/Makefile |   1 -
 drivers/net/wireless/ath/ath5k/ahb.c    | 234 --------------------------------
 drivers/net/wireless/ath/ath5k/ath5k.h  |  28 ----
 drivers/net/wireless/ath/ath5k/base.c   |  14 --
 drivers/net/wireless/ath/ath5k/led.c    |   6 -
 6 files changed, 3 insertions(+), 294 deletions(-)
 delete mode 100644 drivers/net/wireless/ath/ath5k/ahb.c

diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index c9f81a388f15..93caf8e68901 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,13 +1,12 @@
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
-	depends on (PCI || ATHEROS_AR231X) && MAC80211
+	depends on PCI && MAC80211
 	select ATH_COMMON
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
 	select AVERAGE
-	select ATH5K_AHB if (ATHEROS_AR231X && !PCI)
-	select ATH5K_PCI if (!ATHEROS_AR231X && PCI)
+	select ATH5K_PCI
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros 5xxx chipset.
@@ -52,16 +51,9 @@ config ATH5K_TRACER
 
 	  If unsure, say N.
 
-config ATH5K_AHB
-	bool "Atheros 5xxx AHB bus support"
-	depends on (ATHEROS_AR231X && !PCI)
-	---help---
-	  This adds support for WiSoC type chipsets of the 5xxx Atheros
-	  family.
-
 config ATH5K_PCI
 	bool "Atheros 5xxx PCI bus support"
-	depends on (!ATHEROS_AR231X && PCI)
+	depends on PCI
 	---help---
 	  This adds support for PCI type chipsets of the 5xxx Atheros
 	  family.
diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile
index 1b3a34f7f224..51e2d8668041 100644
--- a/drivers/net/wireless/ath/ath5k/Makefile
+++ b/drivers/net/wireless/ath/ath5k/Makefile
@@ -17,6 +17,5 @@ ath5k-y				+= ani.o
 ath5k-y				+= sysfs.o
 ath5k-y				+= mac80211-ops.o
 ath5k-$(CONFIG_ATH5K_DEBUG)	+= debug.o
-ath5k-$(CONFIG_ATH5K_AHB)	+= ahb.o
 ath5k-$(CONFIG_ATH5K_PCI)	+= pci.o
 obj-$(CONFIG_ATH5K)		+= ath5k.o
diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c
deleted file mode 100644
index 79bffe165cab..000000000000
--- a/drivers/net/wireless/ath/ath5k/ahb.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Copyright (c) 2008-2009 Atheros Communications Inc.
- * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/nl80211.h>
-#include <linux/platform_device.h>
-#include <linux/etherdevice.h>
-#include <linux/export.h>
-#include <ar231x_platform.h>
-#include "ath5k.h"
-#include "debug.h"
-#include "base.h"
-#include "reg.h"
-
-/* return bus cachesize in 4B word units */
-static void ath5k_ahb_read_cachesize(struct ath_common *common, int *csz)
-{
-	*csz = L1_CACHE_BYTES >> 2;
-}
-
-static bool
-ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
-{
-	struct ath5k_hw *ah = common->priv;
-	struct platform_device *pdev = to_platform_device(ah->dev);
-	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
-	u16 *eeprom, *eeprom_end;
-
-	eeprom = (u16 *) bcfg->radio;
-	eeprom_end = ((void *) bcfg->config) + BOARD_CONFIG_BUFSZ;
-
-	eeprom += off;
-	if (eeprom > eeprom_end)
-		return false;
-
-	*data = *eeprom;
-	return true;
-}
-
-int ath5k_hw_read_srev(struct ath5k_hw *ah)
-{
-	struct platform_device *pdev = to_platform_device(ah->dev);
-	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
-	ah->ah_mac_srev = bcfg->devid;
-	return 0;
-}
-
-static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
-{
-	struct platform_device *pdev = to_platform_device(ah->dev);
-	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
-	u8 *cfg_mac;
-
-	if (to_platform_device(ah->dev)->id == 0)
-		cfg_mac = bcfg->config->wlan0_mac;
-	else
-		cfg_mac = bcfg->config->wlan1_mac;
-
-	memcpy(mac, cfg_mac, ETH_ALEN);
-	return 0;
-}
-
-static const struct ath_bus_ops ath_ahb_bus_ops = {
-	.ath_bus_type = ATH_AHB,
-	.read_cachesize = ath5k_ahb_read_cachesize,
-	.eeprom_read = ath5k_ahb_eeprom_read,
-	.eeprom_read_mac = ath5k_ahb_eeprom_read_mac,
-};
-
-/*Initialization*/
-static int ath_ahb_probe(struct platform_device *pdev)
-{
-	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
-	struct ath5k_hw *ah;
-	struct ieee80211_hw *hw;
-	struct resource *res;
-	void __iomem *mem;
-	int irq;
-	int ret = 0;
-	u32 reg;
-
-	if (!dev_get_platdata(&pdev->dev)) {
-		dev_err(&pdev->dev, "no platform data specified\n");
-		ret = -EINVAL;
-		goto err_out;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no memory resource found\n");
-		ret = -ENXIO;
-		goto err_out;
-	}
-
-	mem = ioremap_nocache(res->start, resource_size(res));
-	if (mem == NULL) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err_out;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no IRQ resource found\n");
-		ret = -ENXIO;
-		goto err_iounmap;
-	}
-
-	irq = res->start;
-
-	hw = ieee80211_alloc_hw(sizeof(struct ath5k_hw), &ath5k_hw_ops);
-	if (hw == NULL) {
-		dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
-		ret = -ENOMEM;
-		goto err_iounmap;
-	}
-
-	ah = hw->priv;
-	ah->hw = hw;
-	ah->dev = &pdev->dev;
-	ah->iobase = mem;
-	ah->irq = irq;
-	ah->devid = bcfg->devid;
-
-	if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
-		/* Enable WMAC AHB arbitration */
-		reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
-		reg |= AR5K_AR2315_AHB_ARB_CTL_WLAN;
-		iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
-
-		/* Enable global WMAC swapping */
-		reg = ioread32((void __iomem *) AR5K_AR2315_BYTESWAP);
-		reg |= AR5K_AR2315_BYTESWAP_WMAC;
-		iowrite32(reg, (void __iomem *) AR5K_AR2315_BYTESWAP);
-	} else {
-		/* Enable WMAC DMA access (assuming 5312 or 231x*/
-		/* TODO: check other platforms */
-		reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
-		if (to_platform_device(ah->dev)->id == 0)
-			reg |= AR5K_AR5312_ENABLE_WLAN0;
-		else
-			reg |= AR5K_AR5312_ENABLE_WLAN1;
-		iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
-
-		/*
-		 * On a dual-band AR5312, the multiband radio is only
-		 * used as pass-through. Disable 2 GHz support in the
-		 * driver for it
-		 */
-		if (to_platform_device(ah->dev)->id == 0 &&
-		    (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) ==
-		     (BD_WLAN1 | BD_WLAN0))
-			ah->ah_capabilities.cap_needs_2GHz_ovr = true;
-		else
-			ah->ah_capabilities.cap_needs_2GHz_ovr = false;
-	}
-
-	ret = ath5k_init_ah(ah, &ath_ahb_bus_ops);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
-		ret = -ENODEV;
-		goto err_free_hw;
-	}
-
-	platform_set_drvdata(pdev, hw);
-
-	return 0;
-
- err_free_hw:
-	ieee80211_free_hw(hw);
- err_iounmap:
-        iounmap(mem);
- err_out:
-	return ret;
-}
-
-static int ath_ahb_remove(struct platform_device *pdev)
-{
-	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
-	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
-	struct ath5k_hw *ah;
-	u32 reg;
-
-	if (!hw)
-		return 0;
-
-	ah = hw->priv;
-
-	if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
-		/* Disable WMAC AHB arbitration */
-		reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
-		reg &= ~AR5K_AR2315_AHB_ARB_CTL_WLAN;
-		iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
-	} else {
-		/*Stop DMA access */
-		reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
-		if (to_platform_device(ah->dev)->id == 0)
-			reg &= ~AR5K_AR5312_ENABLE_WLAN0;
-		else
-			reg &= ~AR5K_AR5312_ENABLE_WLAN1;
-		iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
-	}
-
-	ath5k_deinit_ah(ah);
-	iounmap(ah->iobase);
-	ieee80211_free_hw(hw);
-
-	return 0;
-}
-
-static struct platform_driver ath_ahb_driver = {
-	.probe      = ath_ahb_probe,
-	.remove     = ath_ahb_remove,
-	.driver		= {
-		.name	= "ar231x-wmac",
-		.owner	= THIS_MODULE,
-	},
-};
-
-module_platform_driver(ath_ahb_driver);
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 85316bb3f8c6..ed2468220216 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1647,32 +1647,6 @@ static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
 	return &(ath5k_hw_common(ah)->regulatory);
 }
 
-#ifdef CONFIG_ATHEROS_AR231X
-#define AR5K_AR2315_PCI_BASE	((void __iomem *)0xb0100000)
-
-static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
-{
-	/* On AR2315 and AR2317 the PCI clock domain registers
-	 * are outside of the WMAC register space */
-	if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
-	    (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
-		return AR5K_AR2315_PCI_BASE + reg;
-
-	return ah->iobase + reg;
-}
-
-static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
-{
-	return ioread32(ath5k_ahb_reg(ah, reg));
-}
-
-static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
-{
-	iowrite32(val, ath5k_ahb_reg(ah, reg));
-}
-
-#else
-
 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
 {
 	return ioread32(ah->iobase + reg);
@@ -1683,8 +1657,6 @@ static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
 	iowrite32(val, ah->iobase + reg);
 }
 
-#endif
-
 static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah)
 {
 	return ath5k_hw_common(ah)->bus_ops->ath_bus_type;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 59a87247aac4..a4a09bb8f2f3 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -99,15 +99,6 @@ static int ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan,
 
 /* Known SREVs */
 static const struct ath5k_srev_name srev_names[] = {
-#ifdef CONFIG_ATHEROS_AR231X
-	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R2 },
-	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R7 },
-	{ "2313",	AR5K_VERSION_MAC,	AR5K_SREV_AR2313_R8 },
-	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R6 },
-	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R7 },
-	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R1 },
-	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R2 },
-#else
 	{ "5210",	AR5K_VERSION_MAC,	AR5K_SREV_AR5210 },
 	{ "5311",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311 },
 	{ "5311A",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311A },
@@ -126,7 +117,6 @@ static const struct ath5k_srev_name srev_names[] = {
 	{ "5418",	AR5K_VERSION_MAC,	AR5K_SREV_AR5418 },
 	{ "2425",	AR5K_VERSION_MAC,	AR5K_SREV_AR2425 },
 	{ "2417",	AR5K_VERSION_MAC,	AR5K_SREV_AR2417 },
-#endif
 	{ "xxxxx",	AR5K_VERSION_MAC,	AR5K_SREV_UNKNOWN },
 	{ "5110",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5110 },
 	{ "5111",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5111 },
@@ -142,10 +132,6 @@ static const struct ath5k_srev_name srev_names[] = {
 	{ "5413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5413 },
 	{ "5424",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5424 },
 	{ "5133",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5133 },
-#ifdef CONFIG_ATHEROS_AR231X
-	{ "2316",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2316 },
-	{ "2317",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2317 },
-#endif
 	{ "xxxxx",	AR5K_VERSION_RAD,	AR5K_SREV_UNKNOWN },
 };
 
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index 2062d1190556..0beb7e7d6075 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -163,20 +163,14 @@ int ath5k_init_leds(struct ath5k_hw *ah)
 {
 	int ret = 0;
 	struct ieee80211_hw *hw = ah->hw;
-#ifndef CONFIG_ATHEROS_AR231X
 	struct pci_dev *pdev = ah->pdev;
-#endif
 	char name[ATH5K_LED_MAX_NAME_LEN + 1];
 	const struct pci_device_id *match;
 
 	if (!ah->pdev)
 		return 0;
 
-#ifdef CONFIG_ATHEROS_AR231X
-	match = NULL;
-#else
 	match = pci_match_id(&ath5k_led_devices[0], pdev);
-#endif
 	if (match) {
 		__set_bit(ATH_STAT_LEDSOFT, ah->status);
 		ah->led_pin = ATH_PIN(match->driver_data);
-- 
1.9.3

Re: [PATCH] [RESEND] ath5k: Remove AHB bus support

[John W. Linville]

OK, I'm merging this...

On Wed, Sep 10, 2014 at 10:53:41AM +0200, Paul Bolle wrote:
> AHB bus support was added in v2.6.38, through commit a0b907ee2a71
> ("ath5k: Add AHB bus support."). That code can only be build if the
> Kconfig symbol ATHEROS_AR231X is set. But that symbol has never been
> added to the tree. So AHB bus support has always been dead code.
> 
> Let's remove all code that depends on ATHEROS_AR231X. If that symbol
> ever gets added to the tree the AHB bus support can be re-added too.
> 
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> ---
> First sent in https://lkml.org/lkml/2013/5/13/303 . Updated on top of
> next-20140909.
> 
> Build tested only (no access to this hardware).
> 
>  drivers/net/wireless/ath/ath5k/Kconfig  |  14 +-
>  drivers/net/wireless/ath/ath5k/Makefile |   1 -
>  drivers/net/wireless/ath/ath5k/ahb.c    | 234 --------------------------------
>  drivers/net/wireless/ath/ath5k/ath5k.h  |  28 ----
>  drivers/net/wireless/ath/ath5k/base.c   |  14 --
>  drivers/net/wireless/ath/ath5k/led.c    |   6 -
>  6 files changed, 3 insertions(+), 294 deletions(-)
>  delete mode 100644 drivers/net/wireless/ath/ath5k/ahb.c
> 
> diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
> index c9f81a388f15..93caf8e68901 100644
> --- a/drivers/net/wireless/ath/ath5k/Kconfig
> +++ b/drivers/net/wireless/ath/ath5k/Kconfig
> @@ -1,13 +1,12 @@
>  config ATH5K
>  	tristate "Atheros 5xxx wireless cards support"
> -	depends on (PCI || ATHEROS_AR231X) && MAC80211
> +	depends on PCI && MAC80211
>  	select ATH_COMMON
>  	select MAC80211_LEDS
>  	select LEDS_CLASS
>  	select NEW_LEDS
>  	select AVERAGE
> -	select ATH5K_AHB if (ATHEROS_AR231X && !PCI)
> -	select ATH5K_PCI if (!ATHEROS_AR231X && PCI)
> +	select ATH5K_PCI
>  	---help---
>  	  This module adds support for wireless adapters based on
>  	  Atheros 5xxx chipset.
> @@ -52,16 +51,9 @@ config ATH5K_TRACER
>  
>  	  If unsure, say N.
>  
> -config ATH5K_AHB
> -	bool "Atheros 5xxx AHB bus support"
> -	depends on (ATHEROS_AR231X && !PCI)
> -	---help---
> -	  This adds support for WiSoC type chipsets of the 5xxx Atheros
> -	  family.
> -
>  config ATH5K_PCI
>  	bool "Atheros 5xxx PCI bus support"
> -	depends on (!ATHEROS_AR231X && PCI)
> +	depends on PCI
>  	---help---
>  	  This adds support for PCI type chipsets of the 5xxx Atheros
>  	  family.
> diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile
> index 1b3a34f7f224..51e2d8668041 100644
> --- a/drivers/net/wireless/ath/ath5k/Makefile
> +++ b/drivers/net/wireless/ath/ath5k/Makefile
> @@ -17,6 +17,5 @@ ath5k-y				+= ani.o
>  ath5k-y				+= sysfs.o
>  ath5k-y				+= mac80211-ops.o
>  ath5k-$(CONFIG_ATH5K_DEBUG)	+= debug.o
> -ath5k-$(CONFIG_ATH5K_AHB)	+= ahb.o
>  ath5k-$(CONFIG_ATH5K_PCI)	+= pci.o
>  obj-$(CONFIG_ATH5K)		+= ath5k.o
> diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c
> deleted file mode 100644
> index 79bffe165cab..000000000000
> --- a/drivers/net/wireless/ath/ath5k/ahb.c
> +++ /dev/null
> @@ -1,234 +0,0 @@
> -/*
> - * Copyright (c) 2008-2009 Atheros Communications Inc.
> - * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
> - * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
> - *
> - * Permission to use, copy, modify, and/or distribute this software for any
> - * purpose with or without fee is hereby granted, provided that the above
> - * copyright notice and this permission notice appear in all copies.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
> - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
> - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> - */
> -
> -#include <linux/nl80211.h>
> -#include <linux/platform_device.h>
> -#include <linux/etherdevice.h>
> -#include <linux/export.h>
> -#include <ar231x_platform.h>
> -#include "ath5k.h"
> -#include "debug.h"
> -#include "base.h"
> -#include "reg.h"
> -
> -/* return bus cachesize in 4B word units */
> -static void ath5k_ahb_read_cachesize(struct ath_common *common, int *csz)
> -{
> -	*csz = L1_CACHE_BYTES >> 2;
> -}
> -
> -static bool
> -ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
> -{
> -	struct ath5k_hw *ah = common->priv;
> -	struct platform_device *pdev = to_platform_device(ah->dev);
> -	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
> -	u16 *eeprom, *eeprom_end;
> -
> -	eeprom = (u16 *) bcfg->radio;
> -	eeprom_end = ((void *) bcfg->config) + BOARD_CONFIG_BUFSZ;
> -
> -	eeprom += off;
> -	if (eeprom > eeprom_end)
> -		return false;
> -
> -	*data = *eeprom;
> -	return true;
> -}
> -
> -int ath5k_hw_read_srev(struct ath5k_hw *ah)
> -{
> -	struct platform_device *pdev = to_platform_device(ah->dev);
> -	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
> -	ah->ah_mac_srev = bcfg->devid;
> -	return 0;
> -}
> -
> -static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
> -{
> -	struct platform_device *pdev = to_platform_device(ah->dev);
> -	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
> -	u8 *cfg_mac;
> -
> -	if (to_platform_device(ah->dev)->id == 0)
> -		cfg_mac = bcfg->config->wlan0_mac;
> -	else
> -		cfg_mac = bcfg->config->wlan1_mac;
> -
> -	memcpy(mac, cfg_mac, ETH_ALEN);
> -	return 0;
> -}
> -
> -static const struct ath_bus_ops ath_ahb_bus_ops = {
> -	.ath_bus_type = ATH_AHB,
> -	.read_cachesize = ath5k_ahb_read_cachesize,
> -	.eeprom_read = ath5k_ahb_eeprom_read,
> -	.eeprom_read_mac = ath5k_ahb_eeprom_read_mac,
> -};
> -
> -/*Initialization*/
> -static int ath_ahb_probe(struct platform_device *pdev)
> -{
> -	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
> -	struct ath5k_hw *ah;
> -	struct ieee80211_hw *hw;
> -	struct resource *res;
> -	void __iomem *mem;
> -	int irq;
> -	int ret = 0;
> -	u32 reg;
> -
> -	if (!dev_get_platdata(&pdev->dev)) {
> -		dev_err(&pdev->dev, "no platform data specified\n");
> -		ret = -EINVAL;
> -		goto err_out;
> -	}
> -
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	if (res == NULL) {
> -		dev_err(&pdev->dev, "no memory resource found\n");
> -		ret = -ENXIO;
> -		goto err_out;
> -	}
> -
> -	mem = ioremap_nocache(res->start, resource_size(res));
> -	if (mem == NULL) {
> -		dev_err(&pdev->dev, "ioremap failed\n");
> -		ret = -ENOMEM;
> -		goto err_out;
> -	}
> -
> -	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	if (res == NULL) {
> -		dev_err(&pdev->dev, "no IRQ resource found\n");
> -		ret = -ENXIO;
> -		goto err_iounmap;
> -	}
> -
> -	irq = res->start;
> -
> -	hw = ieee80211_alloc_hw(sizeof(struct ath5k_hw), &ath5k_hw_ops);
> -	if (hw == NULL) {
> -		dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
> -		ret = -ENOMEM;
> -		goto err_iounmap;
> -	}
> -
> -	ah = hw->priv;
> -	ah->hw = hw;
> -	ah->dev = &pdev->dev;
> -	ah->iobase = mem;
> -	ah->irq = irq;
> -	ah->devid = bcfg->devid;
> -
> -	if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
> -		/* Enable WMAC AHB arbitration */
> -		reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
> -		reg |= AR5K_AR2315_AHB_ARB_CTL_WLAN;
> -		iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
> -
> -		/* Enable global WMAC swapping */
> -		reg = ioread32((void __iomem *) AR5K_AR2315_BYTESWAP);
> -		reg |= AR5K_AR2315_BYTESWAP_WMAC;
> -		iowrite32(reg, (void __iomem *) AR5K_AR2315_BYTESWAP);
> -	} else {
> -		/* Enable WMAC DMA access (assuming 5312 or 231x*/
> -		/* TODO: check other platforms */
> -		reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
> -		if (to_platform_device(ah->dev)->id == 0)
> -			reg |= AR5K_AR5312_ENABLE_WLAN0;
> -		else
> -			reg |= AR5K_AR5312_ENABLE_WLAN1;
> -		iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
> -
> -		/*
> -		 * On a dual-band AR5312, the multiband radio is only
> -		 * used as pass-through. Disable 2 GHz support in the
> -		 * driver for it
> -		 */
> -		if (to_platform_device(ah->dev)->id == 0 &&
> -		    (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) ==
> -		     (BD_WLAN1 | BD_WLAN0))
> -			ah->ah_capabilities.cap_needs_2GHz_ovr = true;
> -		else
> -			ah->ah_capabilities.cap_needs_2GHz_ovr = false;
> -	}
> -
> -	ret = ath5k_init_ah(ah, &ath_ahb_bus_ops);
> -	if (ret != 0) {
> -		dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
> -		ret = -ENODEV;
> -		goto err_free_hw;
> -	}
> -
> -	platform_set_drvdata(pdev, hw);
> -
> -	return 0;
> -
> - err_free_hw:
> -	ieee80211_free_hw(hw);
> - err_iounmap:
> -        iounmap(mem);
> - err_out:
> -	return ret;
> -}
> -
> -static int ath_ahb_remove(struct platform_device *pdev)
> -{
> -	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
> -	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
> -	struct ath5k_hw *ah;
> -	u32 reg;
> -
> -	if (!hw)
> -		return 0;
> -
> -	ah = hw->priv;
> -
> -	if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
> -		/* Disable WMAC AHB arbitration */
> -		reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
> -		reg &= ~AR5K_AR2315_AHB_ARB_CTL_WLAN;
> -		iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
> -	} else {
> -		/*Stop DMA access */
> -		reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
> -		if (to_platform_device(ah->dev)->id == 0)
> -			reg &= ~AR5K_AR5312_ENABLE_WLAN0;
> -		else
> -			reg &= ~AR5K_AR5312_ENABLE_WLAN1;
> -		iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
> -	}
> -
> -	ath5k_deinit_ah(ah);
> -	iounmap(ah->iobase);
> -	ieee80211_free_hw(hw);
> -
> -	return 0;
> -}
> -
> -static struct platform_driver ath_ahb_driver = {
> -	.probe      = ath_ahb_probe,
> -	.remove     = ath_ahb_remove,
> -	.driver		= {
> -		.name	= "ar231x-wmac",
> -		.owner	= THIS_MODULE,
> -	},
> -};
> -
> -module_platform_driver(ath_ahb_driver);
> diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
> index 85316bb3f8c6..ed2468220216 100644
> --- a/drivers/net/wireless/ath/ath5k/ath5k.h
> +++ b/drivers/net/wireless/ath/ath5k/ath5k.h
> @@ -1647,32 +1647,6 @@ static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
>  	return &(ath5k_hw_common(ah)->regulatory);
>  }
>  
> -#ifdef CONFIG_ATHEROS_AR231X
> -#define AR5K_AR2315_PCI_BASE	((void __iomem *)0xb0100000)
> -
> -static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
> -{
> -	/* On AR2315 and AR2317 the PCI clock domain registers
> -	 * are outside of the WMAC register space */
> -	if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
> -	    (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
> -		return AR5K_AR2315_PCI_BASE + reg;
> -
> -	return ah->iobase + reg;
> -}
> -
> -static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
> -{
> -	return ioread32(ath5k_ahb_reg(ah, reg));
> -}
> -
> -static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
> -{
> -	iowrite32(val, ath5k_ahb_reg(ah, reg));
> -}
> -
> -#else
> -
>  static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
>  {
>  	return ioread32(ah->iobase + reg);
> @@ -1683,8 +1657,6 @@ static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
>  	iowrite32(val, ah->iobase + reg);
>  }
>  
> -#endif
> -
>  static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah)
>  {
>  	return ath5k_hw_common(ah)->bus_ops->ath_bus_type;
> diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
> index 59a87247aac4..a4a09bb8f2f3 100644
> --- a/drivers/net/wireless/ath/ath5k/base.c
> +++ b/drivers/net/wireless/ath/ath5k/base.c
> @@ -99,15 +99,6 @@ static int ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan,
>  
>  /* Known SREVs */
>  static const struct ath5k_srev_name srev_names[] = {
> -#ifdef CONFIG_ATHEROS_AR231X
> -	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R2 },
> -	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R7 },
> -	{ "2313",	AR5K_VERSION_MAC,	AR5K_SREV_AR2313_R8 },
> -	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R6 },
> -	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R7 },
> -	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R1 },
> -	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R2 },
> -#else
>  	{ "5210",	AR5K_VERSION_MAC,	AR5K_SREV_AR5210 },
>  	{ "5311",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311 },
>  	{ "5311A",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311A },
> @@ -126,7 +117,6 @@ static const struct ath5k_srev_name srev_names[] = {
>  	{ "5418",	AR5K_VERSION_MAC,	AR5K_SREV_AR5418 },
>  	{ "2425",	AR5K_VERSION_MAC,	AR5K_SREV_AR2425 },
>  	{ "2417",	AR5K_VERSION_MAC,	AR5K_SREV_AR2417 },
> -#endif
>  	{ "xxxxx",	AR5K_VERSION_MAC,	AR5K_SREV_UNKNOWN },
>  	{ "5110",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5110 },
>  	{ "5111",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5111 },
> @@ -142,10 +132,6 @@ static const struct ath5k_srev_name srev_names[] = {
>  	{ "5413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5413 },
>  	{ "5424",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5424 },
>  	{ "5133",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5133 },
> -#ifdef CONFIG_ATHEROS_AR231X
> -	{ "2316",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2316 },
> -	{ "2317",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2317 },
> -#endif
>  	{ "xxxxx",	AR5K_VERSION_RAD,	AR5K_SREV_UNKNOWN },
>  };
>  
> diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
> index 2062d1190556..0beb7e7d6075 100644
> --- a/drivers/net/wireless/ath/ath5k/led.c
> +++ b/drivers/net/wireless/ath/ath5k/led.c
> @@ -163,20 +163,14 @@ int ath5k_init_leds(struct ath5k_hw *ah)
>  {
>  	int ret = 0;
>  	struct ieee80211_hw *hw = ah->hw;
> -#ifndef CONFIG_ATHEROS_AR231X
>  	struct pci_dev *pdev = ah->pdev;
> -#endif
>  	char name[ATH5K_LED_MAX_NAME_LEN + 1];
>  	const struct pci_device_id *match;
>  
>  	if (!ah->pdev)
>  		return 0;
>  
> -#ifdef CONFIG_ATHEROS_AR231X
> -	match = NULL;
> -#else
>  	match = pci_match_id(&ath5k_led_devices[0], pdev);
> -#endif
>  	if (match) {
>  		__set_bit(ATH_STAT_LEDSOFT, ah->status);
>  		ah->led_pin = ATH_PIN(match->driver_data);
> -- 
> 1.9.3
> 
> 
> 

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re: [PATCH] [RESEND] ath5k: Remove AHB bus support

[John W. Linville]

OK, I'm merging this...

On Wed, Sep 10, 2014 at 10:53:41AM +0200, Paul Bolle wrote:
> AHB bus support was added in v2.6.38, through commit a0b907ee2a71
> ("ath5k: Add AHB bus support."). That code can only be build if the
> Kconfig symbol ATHEROS_AR231X is set. But that symbol has never been
> added to the tree. So AHB bus support has always been dead code.
> 
> Let's remove all code that depends on ATHEROS_AR231X. If that symbol
> ever gets added to the tree the AHB bus support can be re-added too.
> 
> Signed-off-by: Paul Bolle <pebolle-IWqWACnzNjzz+pZb47iToQ@public.gmane.org>
> ---
> First sent in https://lkml.org/lkml/2013/5/13/303 . Updated on top of
> next-20140909.
> 
> Build tested only (no access to this hardware).
> 
>  drivers/net/wireless/ath/ath5k/Kconfig  |  14 +-
>  drivers/net/wireless/ath/ath5k/Makefile |   1 -
>  drivers/net/wireless/ath/ath5k/ahb.c    | 234 --------------------------------
>  drivers/net/wireless/ath/ath5k/ath5k.h  |  28 ----
>  drivers/net/wireless/ath/ath5k/base.c   |  14 --
>  drivers/net/wireless/ath/ath5k/led.c    |   6 -
>  6 files changed, 3 insertions(+), 294 deletions(-)
>  delete mode 100644 drivers/net/wireless/ath/ath5k/ahb.c
> 
> diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
> index c9f81a388f15..93caf8e68901 100644
> --- a/drivers/net/wireless/ath/ath5k/Kconfig
> +++ b/drivers/net/wireless/ath/ath5k/Kconfig
> @@ -1,13 +1,12 @@
>  config ATH5K
>  	tristate "Atheros 5xxx wireless cards support"
> -	depends on (PCI || ATHEROS_AR231X) && MAC80211
> +	depends on PCI && MAC80211
>  	select ATH_COMMON
>  	select MAC80211_LEDS
>  	select LEDS_CLASS
>  	select NEW_LEDS
>  	select AVERAGE
> -	select ATH5K_AHB if (ATHEROS_AR231X && !PCI)
> -	select ATH5K_PCI if (!ATHEROS_AR231X && PCI)
> +	select ATH5K_PCI
>  	---help---
>  	  This module adds support for wireless adapters based on
>  	  Atheros 5xxx chipset.
> @@ -52,16 +51,9 @@ config ATH5K_TRACER
>  
>  	  If unsure, say N.
>  
> -config ATH5K_AHB
> -	bool "Atheros 5xxx AHB bus support"
> -	depends on (ATHEROS_AR231X && !PCI)
> -	---help---
> -	  This adds support for WiSoC type chipsets of the 5xxx Atheros
> -	  family.
> -
>  config ATH5K_PCI
>  	bool "Atheros 5xxx PCI bus support"
> -	depends on (!ATHEROS_AR231X && PCI)
> +	depends on PCI
>  	---help---
>  	  This adds support for PCI type chipsets of the 5xxx Atheros
>  	  family.
> diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile
> index 1b3a34f7f224..51e2d8668041 100644
> --- a/drivers/net/wireless/ath/ath5k/Makefile
> +++ b/drivers/net/wireless/ath/ath5k/Makefile
> @@ -17,6 +17,5 @@ ath5k-y				+= ani.o
>  ath5k-y				+= sysfs.o
>  ath5k-y				+= mac80211-ops.o
>  ath5k-$(CONFIG_ATH5K_DEBUG)	+= debug.o
> -ath5k-$(CONFIG_ATH5K_AHB)	+= ahb.o
>  ath5k-$(CONFIG_ATH5K_PCI)	+= pci.o
>  obj-$(CONFIG_ATH5K)		+= ath5k.o
> diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c
> deleted file mode 100644
> index 79bffe165cab..000000000000
> --- a/drivers/net/wireless/ath/ath5k/ahb.c
> +++ /dev/null
> @@ -1,234 +0,0 @@
> -/*
> - * Copyright (c) 2008-2009 Atheros Communications Inc.
> - * Copyright (c) 2009 Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
> - * Copyright (c) 2009 Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
> - *
> - * Permission to use, copy, modify, and/or distribute this software for any
> - * purpose with or without fee is hereby granted, provided that the above
> - * copyright notice and this permission notice appear in all copies.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
> - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
> - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> - */
> -
> -#include <linux/nl80211.h>
> -#include <linux/platform_device.h>
> -#include <linux/etherdevice.h>
> -#include <linux/export.h>
> -#include <ar231x_platform.h>
> -#include "ath5k.h"
> -#include "debug.h"
> -#include "base.h"
> -#include "reg.h"
> -
> -/* return bus cachesize in 4B word units */
> -static void ath5k_ahb_read_cachesize(struct ath_common *common, int *csz)
> -{
> -	*csz = L1_CACHE_BYTES >> 2;
> -}
> -
> -static bool
> -ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
> -{
> -	struct ath5k_hw *ah = common->priv;
> -	struct platform_device *pdev = to_platform_device(ah->dev);
> -	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
> -	u16 *eeprom, *eeprom_end;
> -
> -	eeprom = (u16 *) bcfg->radio;
> -	eeprom_end = ((void *) bcfg->config) + BOARD_CONFIG_BUFSZ;
> -
> -	eeprom += off;
> -	if (eeprom > eeprom_end)
> -		return false;
> -
> -	*data = *eeprom;
> -	return true;
> -}
> -
> -int ath5k_hw_read_srev(struct ath5k_hw *ah)
> -{
> -	struct platform_device *pdev = to_platform_device(ah->dev);
> -	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
> -	ah->ah_mac_srev = bcfg->devid;
> -	return 0;
> -}
> -
> -static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
> -{
> -	struct platform_device *pdev = to_platform_device(ah->dev);
> -	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
> -	u8 *cfg_mac;
> -
> -	if (to_platform_device(ah->dev)->id == 0)
> -		cfg_mac = bcfg->config->wlan0_mac;
> -	else
> -		cfg_mac = bcfg->config->wlan1_mac;
> -
> -	memcpy(mac, cfg_mac, ETH_ALEN);
> -	return 0;
> -}
> -
> -static const struct ath_bus_ops ath_ahb_bus_ops = {
> -	.ath_bus_type = ATH_AHB,
> -	.read_cachesize = ath5k_ahb_read_cachesize,
> -	.eeprom_read = ath5k_ahb_eeprom_read,
> -	.eeprom_read_mac = ath5k_ahb_eeprom_read_mac,
> -};
> -
> -/*Initialization*/
> -static int ath_ahb_probe(struct platform_device *pdev)
> -{
> -	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
> -	struct ath5k_hw *ah;
> -	struct ieee80211_hw *hw;
> -	struct resource *res;
> -	void __iomem *mem;
> -	int irq;
> -	int ret = 0;
> -	u32 reg;
> -
> -	if (!dev_get_platdata(&pdev->dev)) {
> -		dev_err(&pdev->dev, "no platform data specified\n");
> -		ret = -EINVAL;
> -		goto err_out;
> -	}
> -
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	if (res == NULL) {
> -		dev_err(&pdev->dev, "no memory resource found\n");
> -		ret = -ENXIO;
> -		goto err_out;
> -	}
> -
> -	mem = ioremap_nocache(res->start, resource_size(res));
> -	if (mem == NULL) {
> -		dev_err(&pdev->dev, "ioremap failed\n");
> -		ret = -ENOMEM;
> -		goto err_out;
> -	}
> -
> -	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	if (res == NULL) {
> -		dev_err(&pdev->dev, "no IRQ resource found\n");
> -		ret = -ENXIO;
> -		goto err_iounmap;
> -	}
> -
> -	irq = res->start;
> -
> -	hw = ieee80211_alloc_hw(sizeof(struct ath5k_hw), &ath5k_hw_ops);
> -	if (hw == NULL) {
> -		dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
> -		ret = -ENOMEM;
> -		goto err_iounmap;
> -	}
> -
> -	ah = hw->priv;
> -	ah->hw = hw;
> -	ah->dev = &pdev->dev;
> -	ah->iobase = mem;
> -	ah->irq = irq;
> -	ah->devid = bcfg->devid;
> -
> -	if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
> -		/* Enable WMAC AHB arbitration */
> -		reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
> -		reg |= AR5K_AR2315_AHB_ARB_CTL_WLAN;
> -		iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
> -
> -		/* Enable global WMAC swapping */
> -		reg = ioread32((void __iomem *) AR5K_AR2315_BYTESWAP);
> -		reg |= AR5K_AR2315_BYTESWAP_WMAC;
> -		iowrite32(reg, (void __iomem *) AR5K_AR2315_BYTESWAP);
> -	} else {
> -		/* Enable WMAC DMA access (assuming 5312 or 231x*/
> -		/* TODO: check other platforms */
> -		reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
> -		if (to_platform_device(ah->dev)->id == 0)
> -			reg |= AR5K_AR5312_ENABLE_WLAN0;
> -		else
> -			reg |= AR5K_AR5312_ENABLE_WLAN1;
> -		iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
> -
> -		/*
> -		 * On a dual-band AR5312, the multiband radio is only
> -		 * used as pass-through. Disable 2 GHz support in the
> -		 * driver for it
> -		 */
> -		if (to_platform_device(ah->dev)->id == 0 &&
> -		    (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) ==
> -		     (BD_WLAN1 | BD_WLAN0))
> -			ah->ah_capabilities.cap_needs_2GHz_ovr = true;
> -		else
> -			ah->ah_capabilities.cap_needs_2GHz_ovr = false;
> -	}
> -
> -	ret = ath5k_init_ah(ah, &ath_ahb_bus_ops);
> -	if (ret != 0) {
> -		dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
> -		ret = -ENODEV;
> -		goto err_free_hw;
> -	}
> -
> -	platform_set_drvdata(pdev, hw);
> -
> -	return 0;
> -
> - err_free_hw:
> -	ieee80211_free_hw(hw);
> - err_iounmap:
> -        iounmap(mem);
> - err_out:
> -	return ret;
> -}
> -
> -static int ath_ahb_remove(struct platform_device *pdev)
> -{
> -	struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev);
> -	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
> -	struct ath5k_hw *ah;
> -	u32 reg;
> -
> -	if (!hw)
> -		return 0;
> -
> -	ah = hw->priv;
> -
> -	if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
> -		/* Disable WMAC AHB arbitration */
> -		reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
> -		reg &= ~AR5K_AR2315_AHB_ARB_CTL_WLAN;
> -		iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
> -	} else {
> -		/*Stop DMA access */
> -		reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
> -		if (to_platform_device(ah->dev)->id == 0)
> -			reg &= ~AR5K_AR5312_ENABLE_WLAN0;
> -		else
> -			reg &= ~AR5K_AR5312_ENABLE_WLAN1;
> -		iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
> -	}
> -
> -	ath5k_deinit_ah(ah);
> -	iounmap(ah->iobase);
> -	ieee80211_free_hw(hw);
> -
> -	return 0;
> -}
> -
> -static struct platform_driver ath_ahb_driver = {
> -	.probe      = ath_ahb_probe,
> -	.remove     = ath_ahb_remove,
> -	.driver		= {
> -		.name	= "ar231x-wmac",
> -		.owner	= THIS_MODULE,
> -	},
> -};
> -
> -module_platform_driver(ath_ahb_driver);
> diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
> index 85316bb3f8c6..ed2468220216 100644
> --- a/drivers/net/wireless/ath/ath5k/ath5k.h
> +++ b/drivers/net/wireless/ath/ath5k/ath5k.h
> @@ -1647,32 +1647,6 @@ static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
>  	return &(ath5k_hw_common(ah)->regulatory);
>  }
>  
> -#ifdef CONFIG_ATHEROS_AR231X
> -#define AR5K_AR2315_PCI_BASE	((void __iomem *)0xb0100000)
> -
> -static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
> -{
> -	/* On AR2315 and AR2317 the PCI clock domain registers
> -	 * are outside of the WMAC register space */
> -	if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
> -	    (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
> -		return AR5K_AR2315_PCI_BASE + reg;
> -
> -	return ah->iobase + reg;
> -}
> -
> -static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
> -{
> -	return ioread32(ath5k_ahb_reg(ah, reg));
> -}
> -
> -static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
> -{
> -	iowrite32(val, ath5k_ahb_reg(ah, reg));
> -}
> -
> -#else
> -
>  static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
>  {
>  	return ioread32(ah->iobase + reg);
> @@ -1683,8 +1657,6 @@ static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
>  	iowrite32(val, ah->iobase + reg);
>  }
>  
> -#endif
> -
>  static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah)
>  {
>  	return ath5k_hw_common(ah)->bus_ops->ath_bus_type;
> diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
> index 59a87247aac4..a4a09bb8f2f3 100644
> --- a/drivers/net/wireless/ath/ath5k/base.c
> +++ b/drivers/net/wireless/ath/ath5k/base.c
> @@ -99,15 +99,6 @@ static int ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan,
>  
>  /* Known SREVs */
>  static const struct ath5k_srev_name srev_names[] = {
> -#ifdef CONFIG_ATHEROS_AR231X
> -	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R2 },
> -	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R7 },
> -	{ "2313",	AR5K_VERSION_MAC,	AR5K_SREV_AR2313_R8 },
> -	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R6 },
> -	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R7 },
> -	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R1 },
> -	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R2 },
> -#else
>  	{ "5210",	AR5K_VERSION_MAC,	AR5K_SREV_AR5210 },
>  	{ "5311",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311 },
>  	{ "5311A",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311A },
> @@ -126,7 +117,6 @@ static const struct ath5k_srev_name srev_names[] = {
>  	{ "5418",	AR5K_VERSION_MAC,	AR5K_SREV_AR5418 },
>  	{ "2425",	AR5K_VERSION_MAC,	AR5K_SREV_AR2425 },
>  	{ "2417",	AR5K_VERSION_MAC,	AR5K_SREV_AR2417 },
> -#endif
>  	{ "xxxxx",	AR5K_VERSION_MAC,	AR5K_SREV_UNKNOWN },
>  	{ "5110",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5110 },
>  	{ "5111",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5111 },
> @@ -142,10 +132,6 @@ static const struct ath5k_srev_name srev_names[] = {
>  	{ "5413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5413 },
>  	{ "5424",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5424 },
>  	{ "5133",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5133 },
> -#ifdef CONFIG_ATHEROS_AR231X
> -	{ "2316",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2316 },
> -	{ "2317",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2317 },
> -#endif
>  	{ "xxxxx",	AR5K_VERSION_RAD,	AR5K_SREV_UNKNOWN },
>  };
>  
> diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
> index 2062d1190556..0beb7e7d6075 100644
> --- a/drivers/net/wireless/ath/ath5k/led.c
> +++ b/drivers/net/wireless/ath/ath5k/led.c
> @@ -163,20 +163,14 @@ int ath5k_init_leds(struct ath5k_hw *ah)
>  {
>  	int ret = 0;
>  	struct ieee80211_hw *hw = ah->hw;
> -#ifndef CONFIG_ATHEROS_AR231X
>  	struct pci_dev *pdev = ah->pdev;
> -#endif
>  	char name[ATH5K_LED_MAX_NAME_LEN + 1];
>  	const struct pci_device_id *match;
>  
>  	if (!ah->pdev)
>  		return 0;
>  
> -#ifdef CONFIG_ATHEROS_AR231X
> -	match = NULL;
> -#else
>  	match = pci_match_id(&ath5k_led_devices[0], pdev);
> -#endif
>  	if (match) {
>  		__set_bit(ATH_STAT_LEDSOFT, ah->status);
>  		ah->led_pin = ATH_PIN(match->driver_data);
> -- 
> 1.9.3
> 
> 
> 

-- 
John W. Linville		Someday the world will need a hero, and you
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org			might be all we have.  Be ready.

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

2014-09-09 22:27 GMT+04:00, John W. Linville <linville@tuxdriver.com>:
> On Fri, Sep 05, 2014 at 04:02:10PM +0400, Sergey Ryazanov wrote:
>> 2014-09-05 15:33 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
>> > Hi Sergey,
>> >
>> > On Fri, 2014-09-05 at 15:12 +0400, Sergey Ryazanov wrote:
>> >> 2014-09-05 14:10 GMT+04:00, Paul Bolle <pebolle@tiscali.nl>:
>> >> > On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
>> >> >> Having this conversation every rc1 is getting a bit silly. Could
>> >> >> Jiri
>> >> >> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
>> >> >> submitted?
>> >> >
>> >> > I waited until rc3. Have you seen any activity on this front? If
>> >> > not,
>> >> > should I resend the patch that removes the code in mainline that
>> >> > depends
>> >> > on ATHEROS_AR231X (ie, AHB bus support)?
>> >> >
>> >> Recent activity always could be found in [1]. Now I finish another one
>> >> round of cleanups and have a plan to fix several things (you can
>> >> always find something that you really want to improve). But if you
>> >> insist I could immediately switch to "send upstream" mode. And seems
>> >> that this would be better approach.
>> >>
>> >> 1. https://dev.openwrt.org/log/trunk/target/linux/atheros
>> >
>> > And where can the related PULL requests or patch submissions be found?
>> >
>> I have not sent patches yet, since I thought that it would be easier
>> to cleanup them in openwrt tree and then send them upstream.
>
> That excuse has worn a bit thin.  Perhaps Paul should repost his
> removal and you can add a revert to the start of your patch series?
>
As for me, I do not like such flapping, but you have a final say in
this discussion as a maintainer.

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Jiri Slaby]

On 09/10/2014, 12:33 PM, Sergey Ryazanov wrote:
> 2014-09-09 22:27 GMT+04:00, John W. Linville <linville@tuxdriver.com>:
>> On Fri, Sep 05, 2014 at 04:02:10PM +0400, Sergey Ryazanov wrote:
>>> 2014-09-05 15:33 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
>>>> Hi Sergey,
>>>>
>>>> On Fri, 2014-09-05 at 15:12 +0400, Sergey Ryazanov wrote:
>>>>> 2014-09-05 14:10 GMT+04:00, Paul Bolle <pebolle@tiscali.nl>:
>>>>>> On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
>>>>>>> Having this conversation every rc1 is getting a bit silly. Could
>>>>>>> Jiri
>>>>>>> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
>>>>>>> submitted?
>>>>>>
>>>>>> I waited until rc3. Have you seen any activity on this front? If
>>>>>> not,
>>>>>> should I resend the patch that removes the code in mainline that
>>>>>> depends
>>>>>> on ATHEROS_AR231X (ie, AHB bus support)?
>>>>>>
>>>>> Recent activity always could be found in [1]. Now I finish another one
>>>>> round of cleanups and have a plan to fix several things (you can
>>>>> always find something that you really want to improve). But if you
>>>>> insist I could immediately switch to "send upstream" mode. And seems
>>>>> that this would be better approach.
>>>>>
>>>>> 1. https://dev.openwrt.org/log/trunk/target/linux/atheros
>>>>
>>>> And where can the related PULL requests or patch submissions be found?
>>>>
>>> I have not sent patches yet, since I thought that it would be easier
>>> to cleanup them in openwrt tree and then send them upstream.
>>
>> That excuse has worn a bit thin.  Perhaps Paul should repost his
>> removal and you can add a revert to the start of your patch series?
>>
> As for me, I do not like such flapping

Agreed in case what you have is in a good enough shape. You (and also
others) can still clean up the code in upstream too. So, if it is
mergeable, send it for upstream inclusion now, otherwise I am all for
John to apply the Paul's patch. The unused code has been a way too long
in the tree now.

thanks,
-- 
js

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Jiri Slaby]

On 09/10/2014, 12:33 PM, Sergey Ryazanov wrote:
> 2014-09-09 22:27 GMT+04:00, John W. Linville <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>:
>> On Fri, Sep 05, 2014 at 04:02:10PM +0400, Sergey Ryazanov wrote:
>>> 2014-09-05 15:33 GMT+04:00 Paul Bolle <pebolle-IWqWACnzNjzz+pZb47iToQ@public.gmane.org>:
>>>> Hi Sergey,
>>>>
>>>> On Fri, 2014-09-05 at 15:12 +0400, Sergey Ryazanov wrote:
>>>>> 2014-09-05 14:10 GMT+04:00, Paul Bolle <pebolle-IWqWACnzNjzz+pZb47iToQ@public.gmane.org>:
>>>>>> On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
>>>>>>> Having this conversation every rc1 is getting a bit silly. Could
>>>>>>> Jiri
>>>>>>> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
>>>>>>> submitted?
>>>>>>
>>>>>> I waited until rc3. Have you seen any activity on this front? If
>>>>>> not,
>>>>>> should I resend the patch that removes the code in mainline that
>>>>>> depends
>>>>>> on ATHEROS_AR231X (ie, AHB bus support)?
>>>>>>
>>>>> Recent activity always could be found in [1]. Now I finish another one
>>>>> round of cleanups and have a plan to fix several things (you can
>>>>> always find something that you really want to improve). But if you
>>>>> insist I could immediately switch to "send upstream" mode. And seems
>>>>> that this would be better approach.
>>>>>
>>>>> 1. https://dev.openwrt.org/log/trunk/target/linux/atheros
>>>>
>>>> And where can the related PULL requests or patch submissions be found?
>>>>
>>> I have not sent patches yet, since I thought that it would be easier
>>> to cleanup them in openwrt tree and then send them upstream.
>>
>> That excuse has worn a bit thin.  Perhaps Paul should repost his
>> removal and you can add a revert to the start of your patch series?
>>
> As for me, I do not like such flapping

Agreed in case what you have is in a good enough shape. You (and also
others) can still clean up the code in upstream too. So, if it is
mergeable, send it for upstream inclusion now, otherwise I am all for
John to apply the Paul's patch. The unused code has been a way too long
in the tree now.

thanks,
-- 
js
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Sergey Ryazanov]

2014-09-10 15:36 GMT+04:00, Jiri Slaby <jirislaby@gmail.com>:
> On 09/10/2014, 12:33 PM, Sergey Ryazanov wrote:
>> 2014-09-09 22:27 GMT+04:00, John W. Linville <linville@tuxdriver.com>:
>>> On Fri, Sep 05, 2014 at 04:02:10PM +0400, Sergey Ryazanov wrote:
>>>> 2014-09-05 15:33 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
>>>>> Hi Sergey,
>>>>>
>>>>> On Fri, 2014-09-05 at 15:12 +0400, Sergey Ryazanov wrote:
>>>>>> 2014-09-05 14:10 GMT+04:00, Paul Bolle <pebolle@tiscali.nl>:
>>>>>>> On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
>>>>>>>> Having this conversation every rc1 is getting a bit silly. Could
>>>>>>>> Jiri
>>>>>>>> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
>>>>>>>> submitted?
>>>>>>>
>>>>>>> I waited until rc3. Have you seen any activity on this front? If
>>>>>>> not,
>>>>>>> should I resend the patch that removes the code in mainline that
>>>>>>> depends
>>>>>>> on ATHEROS_AR231X (ie, AHB bus support)?
>>>>>>>
>>>>>> Recent activity always could be found in [1]. Now I finish another
>>>>>> one
>>>>>> round of cleanups and have a plan to fix several things (you can
>>>>>> always find something that you really want to improve). But if you
>>>>>> insist I could immediately switch to "send upstream" mode. And seems
>>>>>> that this would be better approach.
>>>>>>
>>>>>> 1. https://dev.openwrt.org/log/trunk/target/linux/atheros
>>>>>
>>>>> And where can the related PULL requests or patch submissions be found?
>>>>>
>>>> I have not sent patches yet, since I thought that it would be easier
>>>> to cleanup them in openwrt tree and then send them upstream.
>>>
>>> That excuse has worn a bit thin.  Perhaps Paul should repost his
>>> removal and you can add a revert to the start of your patch series?
>>>
>> As for me, I do not like such flapping
>
> Agreed in case what you have is in a good enough shape. You (and also
> others) can still clean up the code in upstream too. So, if it is
> mergeable, send it for upstream inclusion now, otherwise I am all for
> John to apply the Paul's patch.

Two days is the last deadline :)

> The unused code has been a way too long
> in the tree now.

Code actively used in owrt firmware and its forks.

-- 
BR,
Sergey

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[John W. Linville]

On Wed, Sep 10, 2014 at 04:19:21PM +0400, Sergey Ryazanov wrote:
> 2014-09-10 15:36 GMT+04:00, Jiri Slaby <jirislaby@gmail.com>:
> > On 09/10/2014, 12:33 PM, Sergey Ryazanov wrote:
> >> 2014-09-09 22:27 GMT+04:00, John W. Linville <linville@tuxdriver.com>:
> >>> On Fri, Sep 05, 2014 at 04:02:10PM +0400, Sergey Ryazanov wrote:
> >>>> 2014-09-05 15:33 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
> >>>>> Hi Sergey,
> >>>>>
> >>>>> On Fri, 2014-09-05 at 15:12 +0400, Sergey Ryazanov wrote:
> >>>>>> 2014-09-05 14:10 GMT+04:00, Paul Bolle <pebolle@tiscali.nl>:
> >>>>>>> On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
> >>>>>>>> Having this conversation every rc1 is getting a bit silly. Could
> >>>>>>>> Jiri
> >>>>>>>> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
> >>>>>>>> submitted?
> >>>>>>>
> >>>>>>> I waited until rc3. Have you seen any activity on this front? If
> >>>>>>> not,
> >>>>>>> should I resend the patch that removes the code in mainline that
> >>>>>>> depends
> >>>>>>> on ATHEROS_AR231X (ie, AHB bus support)?
> >>>>>>>
> >>>>>> Recent activity always could be found in [1]. Now I finish another
> >>>>>> one
> >>>>>> round of cleanups and have a plan to fix several things (you can
> >>>>>> always find something that you really want to improve). But if you
> >>>>>> insist I could immediately switch to "send upstream" mode. And seems
> >>>>>> that this would be better approach.
> >>>>>>
> >>>>>> 1. https://dev.openwrt.org/log/trunk/target/linux/atheros
> >>>>>
> >>>>> And where can the related PULL requests or patch submissions be found?
> >>>>>
> >>>> I have not sent patches yet, since I thought that it would be easier
> >>>> to cleanup them in openwrt tree and then send them upstream.
> >>>
> >>> That excuse has worn a bit thin.  Perhaps Paul should repost his
> >>> removal and you can add a revert to the start of your patch series?
> >>>
> >> As for me, I do not like such flapping
> >
> > Agreed in case what you have is in a good enough shape. You (and also
> > others) can still clean up the code in upstream too. So, if it is
> > mergeable, send it for upstream inclusion now, otherwise I am all for
> > John to apply the Paul's patch.
> 
> Two days is the last deadline :)
> 
> > The unused code has been a way too long
> > in the tree now.
> 
> Code actively used in owrt firmware and its forks.

Is this code coming or not?  When can I expect to see it posted?

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[John W. Linville]

On Thu, Sep 11, 2014 at 03:21:46PM -0400, John W. Linville wrote:
> On Wed, Sep 10, 2014 at 04:19:21PM +0400, Sergey Ryazanov wrote:
> > 2014-09-10 15:36 GMT+04:00, Jiri Slaby <jirislaby@gmail.com>:
> > > On 09/10/2014, 12:33 PM, Sergey Ryazanov wrote:
> > >> 2014-09-09 22:27 GMT+04:00, John W. Linville <linville@tuxdriver.com>:
> > >>> On Fri, Sep 05, 2014 at 04:02:10PM +0400, Sergey Ryazanov wrote:
> > >>>> 2014-09-05 15:33 GMT+04:00 Paul Bolle <pebolle@tiscali.nl>:
> > >>>>> Hi Sergey,
> > >>>>>
> > >>>>> On Fri, 2014-09-05 at 15:12 +0400, Sergey Ryazanov wrote:
> > >>>>>> 2014-09-05 14:10 GMT+04:00, Paul Bolle <pebolle@tiscali.nl>:
> > >>>>>>> On Wed, 2014-06-18 at 13:46 +0200, Paul Bolle wrote:
> > >>>>>>>> Having this conversation every rc1 is getting a bit silly. Could
> > >>>>>>>> Jiri
> > >>>>>>>> e.a. perhaps set some specific deadline for ATHEROS_AR231X to be
> > >>>>>>>> submitted?
> > >>>>>>>
> > >>>>>>> I waited until rc3. Have you seen any activity on this front? If
> > >>>>>>> not,
> > >>>>>>> should I resend the patch that removes the code in mainline that
> > >>>>>>> depends
> > >>>>>>> on ATHEROS_AR231X (ie, AHB bus support)?
> > >>>>>>>
> > >>>>>> Recent activity always could be found in [1]. Now I finish another
> > >>>>>> one
> > >>>>>> round of cleanups and have a plan to fix several things (you can
> > >>>>>> always find something that you really want to improve). But if you
> > >>>>>> insist I could immediately switch to "send upstream" mode. And seems
> > >>>>>> that this would be better approach.
> > >>>>>>
> > >>>>>> 1. https://dev.openwrt.org/log/trunk/target/linux/atheros
> > >>>>>
> > >>>>> And where can the related PULL requests or patch submissions be found?
> > >>>>>
> > >>>> I have not sent patches yet, since I thought that it would be easier
> > >>>> to cleanup them in openwrt tree and then send them upstream.
> > >>>
> > >>> That excuse has worn a bit thin.  Perhaps Paul should repost his
> > >>> removal and you can add a revert to the start of your patch series?
> > >>>
> > >> As for me, I do not like such flapping
> > >
> > > Agreed in case what you have is in a good enough shape. You (and also
> > > others) can still clean up the code in upstream too. So, if it is
> > > mergeable, send it for upstream inclusion now, otherwise I am all for
> > > John to apply the Paul's patch.
> > 
> > Two days is the last deadline :)
> > 
> > > The unused code has been a way too long
> > > in the tree now.
> > 
> > Code actively used in owrt firmware and its forks.
> 
> Is this code coming or not?  When can I expect to see it posted?

FYI -- Sergey posted a series to linux-mips on 14 September 2014 that
touches the symbol in question.  For whatever reason, it is posted
there as RFC.

Does this satisfy the interested parties??

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[Paul Bolle]

On Mon, 2014-09-15 at 14:45 -0400, John W. Linville wrote:
> FYI -- Sergey posted a series to linux-mips on 14 September 2014 that
> touches the symbol in question.  For whatever reason, it is posted
> there as RFC.

Thanks for passing that on.

> Does this satisfy the interested parties??

In case I qualify as an interested party: resolving this by, in short,
making AHB support actually buildable is of course the preferable
solution. 

Whether or not we should drop my patch while waiting for that series to
land in linux-next is not my call. But if it hasn't landed by, say,
about the time v3.18-rc3 is released I might raise this issue again.

I must say that I'm a bit puzzled why people have resisted this rather
small cleanup for years. How did having unbuildable AHB support in
mainline benefit anyone? Couldn't the revert of this cleanup also be
handled out of tree? Note that the revert is only "6 files changed, 3
insertions(+), 294 deletions(-)", while the series is "39 files changed,
3911 insertions(+), 10 deletions(-)".


Paul Bolle

Re: [PATCH 09/28] Remove ATHEROS_AR231X

[John W. Linville]

On Tue, Sep 16, 2014 at 10:26:59PM +0200, Paul Bolle wrote:
> On Mon, 2014-09-15 at 14:45 -0400, John W. Linville wrote:
> > FYI -- Sergey posted a series to linux-mips on 14 September 2014 that
> > touches the symbol in question.  For whatever reason, it is posted
> > there as RFC.
> 
> Thanks for passing that on.
> 
> > Does this satisfy the interested parties??
> 
> In case I qualify as an interested party: resolving this by, in short,
> making AHB support actually buildable is of course the preferable
> solution. 
> 
> Whether or not we should drop my patch while waiting for that series to
> land in linux-next is not my call. But if it hasn't landed by, say,
> about the time v3.18-rc3 is released I might raise this issue again.
> 
> I must say that I'm a bit puzzled why people have resisted this rather
> small cleanup for years. How did having unbuildable AHB support in
> mainline benefit anyone? Couldn't the revert of this cleanup also be
> handled out of tree? Note that the revert is only "6 files changed, 3
> insertions(+), 294 deletions(-)", while the series is "39 files changed,
> 3911 insertions(+), 10 deletions(-)".

I think it got added with the notion that the code was "coming soon".
As you have tried to remove it, the "coming soon" refrain continued.

I'm still inclined to merge your patch.  An RFC series posted to
another mailing list doesn't really change my mind.

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

[PATCH 10/28] Remove SH_MOBILE

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/iommu/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 20d062d..68b047a 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -206,8 +206,7 @@ config SHMOBILE_IPMMU_TLB
 config SHMOBILE_IOMMU
 	bool "IOMMU for Renesas IPMMU/IPMMUI"
 	default n
-	depends on ARM
-	depends on SH_MOBILE || COMPILE_TEST
+	depends on ARM || COMPILE_TEST
 	select IOMMU_API
 	select ARM_DMA_USE_IOMMU
 	select SHMOBILE_IPMMU
-- 
1.8.4.2

[PATCH 10/28] Remove SH_MOBILE

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/iommu/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 20d062d..68b047a 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -206,8 +206,7 @@ config SHMOBILE_IPMMU_TLB
 config SHMOBILE_IOMMU
 	bool "IOMMU for Renesas IPMMU/IPMMUI"
 	default n
-	depends on ARM
-	depends on SH_MOBILE || COMPILE_TEST
+	depends on ARM || COMPILE_TEST
 	select IOMMU_API
 	select ARM_DMA_USE_IOMMU
 	select SHMOBILE_IPMMU
-- 
1.8.4.2

Re: [PATCH 10/28] Remove SH_MOBILE

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  drivers/iommu/Kconfig | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 20d062d..68b047a 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -206,8 +206,7 @@ config SHMOBILE_IPMMU_TLB
>  config SHMOBILE_IOMMU
>  	bool "IOMMU for Renesas IPMMU/IPMMUI"
>  	default n
> -	depends on ARM
> -	depends on SH_MOBILE || COMPILE_TEST
> +	depends on ARM || COMPILE_TEST

It seems ARCH_SHMOBILE was intended, see
https://lkml.org/lkml/2014/2/8/256 .

>  	select IOMMU_API
>  	select ARM_DMA_USE_IOMMU
>  	select SHMOBILE_IPMMU


Paul Bolle

Re: [PATCH 10/28] Remove SH_MOBILE

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard-/L3Ra7n9ekc@public.gmane.org>
> ---
>  drivers/iommu/Kconfig | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 20d062d..68b047a 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -206,8 +206,7 @@ config SHMOBILE_IPMMU_TLB
>  config SHMOBILE_IOMMU
>  	bool "IOMMU for Renesas IPMMU/IPMMUI"
>  	default n
> -	depends on ARM
> -	depends on SH_MOBILE || COMPILE_TEST
> +	depends on ARM || COMPILE_TEST

It seems ARCH_SHMOBILE was intended, see
https://lkml.org/lkml/2014/2/8/256 .

>  	select IOMMU_API
>  	select ARM_DMA_USE_IOMMU
>  	select SHMOBILE_IPMMU


Paul Bolle

[PATCH 11/28] Remove ARCH_SUPPORTS_MSI

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/mips/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 792bd22..5b08fe9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -782,7 +782,6 @@ config NLM_XLP_BOARD
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_CPU
-	select ARCH_SUPPORTS_MSI
 	select ZONE_DMA32 if 64BIT
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
-- 
1.8.4.2

[PATCH 11/28] Remove ARCH_SUPPORTS_MSI

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/mips/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 792bd22..5b08fe9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -782,7 +782,6 @@ config NLM_XLP_BOARD
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_CPU
-	select ARCH_SUPPORTS_MSI
 	select ZONE_DMA32 if 64BIT
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
-- 
1.8.4.2

Re: [PATCH 11/28] Remove ARCH_SUPPORTS_MSI

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  arch/mips/Kconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 792bd22..5b08fe9 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -782,7 +782,6 @@ config NLM_XLP_BOARD
>  	select CEVT_R4K
>  	select CSRC_R4K
>  	select IRQ_CPU
> -	select ARCH_SUPPORTS_MSI
>  	select ZONE_DMA32 if 64BIT
>  	select SYNC_R4K
>  	select SYS_HAS_EARLY_PRINTK

I sent an identical patch (with a more verbose explanation) yesterday.
But I'm fine with this one too.


Paul Bolle

[PATCH 12/28] Remove GENERIC_TIME

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-bcm/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index b1aa6a9..8dd5fbf 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -19,7 +19,6 @@ config ARCH_BCM_MOBILE
 	select CPU_V7
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_TIME
 	select GPIO_BCM_KONA
 	select SPARSE_IRQ
 	select TICK_ONESHOT
-- 
1.8.4.2

[PATCH 12/28] Remove GENERIC_TIME

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-bcm/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index b1aa6a9..8dd5fbf 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -19,7 +19,6 @@ config ARCH_BCM_MOBILE
 	select CPU_V7
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_TIME
 	select GPIO_BCM_KONA
 	select SPARSE_IRQ
 	select TICK_ONESHOT
-- 
1.8.4.2

Re: [PATCH 12/28] Remove GENERIC_TIME

[Alexander Shiyan]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=utf-8, Size: 852 bytes --]

> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
> arch/arm/mach-bcm/Kconfig | 1 -
> 1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index b1aa6a9..8dd5fbf 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -19,7 +19,6 @@ config ARCH_BCM_MOBILE
> select CPU_V7
> select CLKSRC_OF
> select GENERIC_CLOCKEVENTS
> -	select GENERIC_TIME
> select GPIO_BCM_KONA
> select SPARSE_IRQ
> select TICK_ONESHOT
> -- 
> 1.8.4.2

I sent a similar patch in November, maintainers nothing did with it.
http://permalink.gmane.org/gmane.linux.ports.arm.kernel/278293

---
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

Re: [PATCH 12/28] Remove GENERIC_TIME

[Alexander Shiyan]

> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
> arch/arm/mach-bcm/Kconfig | 1 -
> 1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index b1aa6a9..8dd5fbf 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -19,7 +19,6 @@ config ARCH_BCM_MOBILE
> select CPU_V7
> select CLKSRC_OF
> select GENERIC_CLOCKEVENTS
> -	select GENERIC_TIME
> select GPIO_BCM_KONA
> select SPARSE_IRQ
> select TICK_ONESHOT
> -- 
> 1.8.4.2

I sent a similar patch in November, maintainers nothing did with it.
http://permalink.gmane.org/gmane.linux.ports.arm.kernel/278293

---

Re: [PATCH 12/28] Remove GENERIC_TIME

[Richard Weinberger]

Am 09.02.2014 19:57, schrieb Alexander Shiyan:
>> The symbol is an orphan, get rid of it.
>>
>> Signed-off-by: Richard Weinberger <richard@nod.at>
>> ---
>> arch/arm/mach-bcm/Kconfig | 1 -
>> 1 file changed, 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
>> index b1aa6a9..8dd5fbf 100644
>> --- a/arch/arm/mach-bcm/Kconfig
>> +++ b/arch/arm/mach-bcm/Kconfig
>> @@ -19,7 +19,6 @@ config ARCH_BCM_MOBILE
>> select CPU_V7
>> select CLKSRC_OF
>> select GENERIC_CLOCKEVENTS
>> -	select GENERIC_TIME
>> select GPIO_BCM_KONA
>> select SPARSE_IRQ
>> select TICK_ONESHOT
>> -- 
>> 1.8.4.2
> 
> I sent a similar patch in November, maintainers nothing did with it.
> http://permalink.gmane.org/gmane.linux.ports.arm.kernel/278293

Then it is time to push it. :D

Thanks,
//richard

[PATCH 12/28] Remove GENERIC_TIME

[Richard Weinberger]

Am 09.02.2014 19:57, schrieb Alexander Shiyan:
>> The symbol is an orphan, get rid of it.
>>
>> Signed-off-by: Richard Weinberger <richard@nod.at>
>> ---
>> arch/arm/mach-bcm/Kconfig | 1 -
>> 1 file changed, 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
>> index b1aa6a9..8dd5fbf 100644
>> --- a/arch/arm/mach-bcm/Kconfig
>> +++ b/arch/arm/mach-bcm/Kconfig
>> @@ -19,7 +19,6 @@ config ARCH_BCM_MOBILE
>> select CPU_V7
>> select CLKSRC_OF
>> select GENERIC_CLOCKEVENTS
>> -	select GENERIC_TIME
>> select GPIO_BCM_KONA
>> select SPARSE_IRQ
>> select TICK_ONESHOT
>> -- 
>> 1.8.4.2
> 
> I sent a similar patch in November, maintainers nothing did with it.
> http://permalink.gmane.org/gmane.linux.ports.arm.kernel/278293

Then it is time to push it. :D

Thanks,
//richard

Re: [PATCH 12/28] Remove GENERIC_TIME

[Christian Daudt]

On Sun, Feb 9, 2014 at 12:02 PM, Richard Weinberger <richard@nod.at> wrote:
> Am 09.02.2014 19:57, schrieb Alexander Shiyan:
>>> The symbol is an orphan, get rid of it.
>>>
>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>> ---
>>> arch/arm/mach-bcm/Kconfig | 1 -
>>> 1 file changed, 1 deletion(-)
>>>
>>> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
>>> index b1aa6a9..8dd5fbf 100644
>>> --- a/arch/arm/mach-bcm/Kconfig
>>> +++ b/arch/arm/mach-bcm/Kconfig
>>> @@ -19,7 +19,6 @@ config ARCH_BCM_MOBILE
>>> select CPU_V7
>>> select CLKSRC_OF
>>> select GENERIC_CLOCKEVENTS
>>> -    select GENERIC_TIME
>>> select GPIO_BCM_KONA
>>> select SPARSE_IRQ
>>> select TICK_ONESHOT
>>> --
>>> 1.8.4.2
>>

Applied to armsoc/for-3.15/soc
Also added signed-off-by for Alexander Shyian and Paul Bolle.

 Thanks,
   csd

[PATCH 12/28] Remove GENERIC_TIME

[Christian Daudt]

On Sun, Feb 9, 2014 at 12:02 PM, Richard Weinberger <richard@nod.at> wrote:
> Am 09.02.2014 19:57, schrieb Alexander Shiyan:
>>> The symbol is an orphan, get rid of it.
>>>
>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>> ---
>>> arch/arm/mach-bcm/Kconfig | 1 -
>>> 1 file changed, 1 deletion(-)
>>>
>>> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
>>> index b1aa6a9..8dd5fbf 100644
>>> --- a/arch/arm/mach-bcm/Kconfig
>>> +++ b/arch/arm/mach-bcm/Kconfig
>>> @@ -19,7 +19,6 @@ config ARCH_BCM_MOBILE
>>> select CPU_V7
>>> select CLKSRC_OF
>>> select GENERIC_CLOCKEVENTS
>>> -    select GENERIC_TIME
>>> select GPIO_BCM_KONA
>>> select SPARSE_IRQ
>>> select TICK_ONESHOT
>>> --
>>> 1.8.4.2
>>

Applied to armsoc/for-3.15/soc
Also added signed-off-by for Alexander Shyian and Paul Bolle.

 Thanks,
   csd

[PATCH 13/28] Remove S3C24XX_GPIO_EXTRA64

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-s3c24xx/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d876431..1c67f04 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -521,7 +521,6 @@ config MACH_ANUBIS
 	select HAVE_PATA_PLATFORM
 	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
-	select S3C24XX_GPIO_EXTRA64
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
-- 
1.8.4.2

[PATCH 13/28] Remove S3C24XX_GPIO_EXTRA64

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-s3c24xx/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d876431..1c67f04 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -521,7 +521,6 @@ config MACH_ANUBIS
 	select HAVE_PATA_PLATFORM
 	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
-	select S3C24XX_GPIO_EXTRA64
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
-- 
1.8.4.2

[PATCH 13/28] Remove S3C24XX_GPIO_EXTRA64

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-s3c24xx/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d876431..1c67f04 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -521,7 +521,6 @@ config MACH_ANUBIS
 	select HAVE_PATA_PLATFORM
 	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
-	select S3C24XX_GPIO_EXTRA64
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
-- 
1.8.4.2

Re: [PATCH 13/28] Remove S3C24XX_GPIO_EXTRA64

[Kukjin Kim]

On 02/10/14 03:47, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
>
> Signed-off-by: Richard Weinberger<richard@nod.at>
> ---
>   arch/arm/mach-s3c24xx/Kconfig | 1 -
>   1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index d876431..1c67f04 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -521,7 +521,6 @@ config MACH_ANUBIS
>   	select HAVE_PATA_PLATFORM
>   	select S3C2440_XTAL_12000000
>   	select S3C24XX_DCLK
> -	select S3C24XX_GPIO_EXTRA64
>   	select S3C24XX_SIMTEC_PM if PM
>   	select S3C_DEV_USB_HOST
>   	help

OK, I will take this into samsung tree.

Thanks,
Kukjin

[PATCH 13/28] Remove S3C24XX_GPIO_EXTRA64

[Kukjin Kim]

On 02/10/14 03:47, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
>
> Signed-off-by: Richard Weinberger<richard@nod.at>
> ---
>   arch/arm/mach-s3c24xx/Kconfig | 1 -
>   1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index d876431..1c67f04 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -521,7 +521,6 @@ config MACH_ANUBIS
>   	select HAVE_PATA_PLATFORM
>   	select S3C2440_XTAL_12000000
>   	select S3C24XX_DCLK
> -	select S3C24XX_GPIO_EXTRA64
>   	select S3C24XX_SIMTEC_PM if PM
>   	select S3C_DEV_USB_HOST
>   	help

OK, I will take this into samsung tree.

Thanks,
Kukjin

Re: [PATCH 13/28] Remove S3C24XX_GPIO_EXTRA64

[Kukjin Kim]

On 02/10/14 03:47, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
>
> Signed-off-by: Richard Weinberger<richard@nod.at>
> ---
>   arch/arm/mach-s3c24xx/Kconfig | 1 -
>   1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index d876431..1c67f04 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -521,7 +521,6 @@ config MACH_ANUBIS
>   	select HAVE_PATA_PLATFORM
>   	select S3C2440_XTAL_12000000
>   	select S3C24XX_DCLK
> -	select S3C24XX_GPIO_EXTRA64
>   	select S3C24XX_SIMTEC_PM if PM
>   	select S3C_DEV_USB_HOST
>   	help

OK, I will take this into samsung tree.

Thanks,
Kukjin

[PATCH 14/28] Remove MACH_SMDKC210

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 sound/soc/samsung/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 454f41c..7ea576c 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -145,7 +145,7 @@ config SND_SOC_SAMSUNG_RX1950_UDA1380
 
 config SND_SOC_SAMSUNG_SMDK_WM9713
 	tristate "SoC AC97 Audio support for SMDK with WM9713"
-	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
+	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310)
 	select SND_SOC_WM9713
 	select SND_SAMSUNG_AC97
 	help
-- 
1.8.4.2

[PATCH 14/28] Remove MACH_SMDKC210

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 sound/soc/samsung/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 454f41c..7ea576c 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -145,7 +145,7 @@ config SND_SOC_SAMSUNG_RX1950_UDA1380
 
 config SND_SOC_SAMSUNG_SMDK_WM9713
 	tristate "SoC AC97 Audio support for SMDK with WM9713"
-	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
+	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310)
 	select SND_SOC_WM9713
 	select SND_SAMSUNG_AC97
 	help
-- 
1.8.4.2

Re: [PATCH 14/28] Remove MACH_SMDKC210

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 963 bytes --]

On Sun, Feb 09, 2014 at 07:47:52PM +0100, Richard Weinberger wrote:

> The symbol is an orphan, get rid of it.

Please fix whatever script you're using to generate your mails, it's
generating corrupt headers.  Please also use subject lines consistent
with the rest of the subsystem - between the two I very nearly just
deleted this unread, it's only Paul's mail that made me look.

>  config SND_SOC_SAMSUNG_SMDK_WM9713
>  	tristate "SoC AC97 Audio support for SMDK with WM9713"
> -	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
> +	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310)

Like I said to Paul this isn't fixing the actual issue - think about why
the symbol was there in the first place and why it was removed.  There
is a problem here but this would make it less likely that it would be
properly fixed.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 14/28] Remove MACH_SMDKC210

[Mark Brown]

On Sun, Feb 09, 2014 at 07:47:52PM +0100, Richard Weinberger wrote:

> The symbol is an orphan, get rid of it.

Please fix whatever script you're using to generate your mails, it's
generating corrupt headers.  Please also use subject lines consistent
with the rest of the subsystem - between the two I very nearly just
deleted this unread, it's only Paul's mail that made me look.

>  config SND_SOC_SAMSUNG_SMDK_WM9713
>  	tristate "SoC AC97 Audio support for SMDK with WM9713"
> -	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
> +	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310)

Like I said to Paul this isn't fixing the actual issue - think about why
the symbol was there in the first place and why it was removed.  There
is a problem here but this would make it less likely that it would be
properly fixed.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140210/45e54c4b/attachment.sig>

Re: [PATCH 14/28] Remove MACH_SMDKC210

[Paul Bolle]

On Mon, 2014-02-10 at 11:41 +0000, Mark Brown wrote:
> On Sun, Feb 09, 2014 at 07:47:52PM +0100, Richard Weinberger wrote:
> Please fix whatever script you're using to generate your mails, it's
> generating corrupt headers.

I think Richard's mail didn't end up on lkml. But it's pretty clear what
it must have looked like.

> >  config SND_SOC_SAMSUNG_SMDK_WM9713
> >  	tristate "SoC AC97 Audio support for SMDK with WM9713"
> > -	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
> > +	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310)
> 
> Like I said to Paul this isn't fixing the actual issue - think about why
> the symbol was there in the first place and why it was removed.  There
> is a problem here but this would make it less likely that it would be
> properly fixed.

Would you mind going through this one step at a time, just to make sure
_I_ understand what it is that you'd like to see?

If so, to be absolutely sure we start from the same point: do you agree
that the above line now effectively reads
    depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || false || false)

because there's neither a Kconfig symbol MACH_SMDKV310 nor a Kconfig
symbol MACH_SMDKC210?


Paul Bolle

[PATCH 14/28] Remove MACH_SMDKC210

[Paul Bolle]

On Mon, 2014-02-10 at 11:41 +0000, Mark Brown wrote:
> On Sun, Feb 09, 2014 at 07:47:52PM +0100, Richard Weinberger wrote:
> Please fix whatever script you're using to generate your mails, it's
> generating corrupt headers.

I think Richard's mail didn't end up on lkml. But it's pretty clear what
it must have looked like.

> >  config SND_SOC_SAMSUNG_SMDK_WM9713
> >  	tristate "SoC AC97 Audio support for SMDK with WM9713"
> > -	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
> > +	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310)
> 
> Like I said to Paul this isn't fixing the actual issue - think about why
> the symbol was there in the first place and why it was removed.  There
> is a problem here but this would make it less likely that it would be
> properly fixed.

Would you mind going through this one step at a time, just to make sure
_I_ understand what it is that you'd like to see?

If so, to be absolutely sure we start from the same point: do you agree
that the above line now effectively reads
    depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || false || false)

because there's neither a Kconfig symbol MACH_SMDKV310 nor a Kconfig
symbol MACH_SMDKC210?


Paul Bolle

Re: [PATCH 14/28] Remove MACH_SMDKC210

[Paul Bolle]

On Mon, 2014-02-10 at 11:41 +0000, Mark Brown wrote:
> On Sun, Feb 09, 2014 at 07:47:52PM +0100, Richard Weinberger wrote:
> Please fix whatever script you're using to generate your mails, it's
> generating corrupt headers.

I think Richard's mail didn't end up on lkml. But it's pretty clear what
it must have looked like.

> >  config SND_SOC_SAMSUNG_SMDK_WM9713
> >  	tristate "SoC AC97 Audio support for SMDK with WM9713"
> > -	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
> > +	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310)
> 
> Like I said to Paul this isn't fixing the actual issue - think about why
> the symbol was there in the first place and why it was removed.  There
> is a problem here but this would make it less likely that it would be
> properly fixed.

Would you mind going through this one step at a time, just to make sure
_I_ understand what it is that you'd like to see?

If so, to be absolutely sure we start from the same point: do you agree
that the above line now effectively reads
    depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || false || false)

because there's neither a Kconfig symbol MACH_SMDKV310 nor a Kconfig
symbol MACH_SMDKC210?


Paul Bolle

Re: [PATCH 14/28] Remove MACH_SMDKC210

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1800 bytes --]

On Mon, Feb 10, 2014 at 02:31:12PM +0100, Paul Bolle wrote:
> On Mon, 2014-02-10 at 11:41 +0000, Mark Brown wrote:
> > On Sun, Feb 09, 2014 at 07:47:52PM +0100, Richard Weinberger wrote:

> > Please fix whatever script you're using to generate your mails, it's
> > generating corrupt headers.

> I think Richard's mail didn't end up on lkml. But it's pretty clear what
> it must have looked like.

I can see what it looked like from my inbox, but my mail client can't
understand them at all and hence didn't think the mails were sent to me
and just ignored them when hitting reply.

> > >  config SND_SOC_SAMSUNG_SMDK_WM9713
> > >  	tristate "SoC AC97 Audio support for SMDK with WM9713"
> > > -	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
> > > +	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310)
> > 
> > Like I said to Paul this isn't fixing the actual issue - think about why
> > the symbol was there in the first place and why it was removed.  There
> > is a problem here but this would make it less likely that it would be
> > properly fixed.

> Would you mind going through this one step at a time, just to make sure
> _I_ understand what it is that you'd like to see?

> If so, to be absolutely sure we start from the same point: do you agree
> that the above line now effectively reads
>     depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || false || false)

> because there's neither a Kconfig symbol MACH_SMDKV310 nor a Kconfig
> symbol MACH_SMDKC210?

Yes, that's correct.  Now, like I say think about what the symbol was
there for in the first place.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 14/28] Remove MACH_SMDKC210

[Mark Brown]

On Mon, Feb 10, 2014 at 02:31:12PM +0100, Paul Bolle wrote:
> On Mon, 2014-02-10 at 11:41 +0000, Mark Brown wrote:
> > On Sun, Feb 09, 2014 at 07:47:52PM +0100, Richard Weinberger wrote:

> > Please fix whatever script you're using to generate your mails, it's
> > generating corrupt headers.

> I think Richard's mail didn't end up on lkml. But it's pretty clear what
> it must have looked like.

I can see what it looked like from my inbox, but my mail client can't
understand them at all and hence didn't think the mails were sent to me
and just ignored them when hitting reply.

> > >  config SND_SOC_SAMSUNG_SMDK_WM9713
> > >  	tristate "SoC AC97 Audio support for SMDK with WM9713"
> > > -	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
> > > +	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310)
> > 
> > Like I said to Paul this isn't fixing the actual issue - think about why
> > the symbol was there in the first place and why it was removed.  There
> > is a problem here but this would make it less likely that it would be
> > properly fixed.

> Would you mind going through this one step at a time, just to make sure
> _I_ understand what it is that you'd like to see?

> If so, to be absolutely sure we start from the same point: do you agree
> that the above line now effectively reads
>     depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || false || false)

> because there's neither a Kconfig symbol MACH_SMDKV310 nor a Kconfig
> symbol MACH_SMDKC210?

Yes, that's correct.  Now, like I say think about what the symbol was
there for in the first place.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140210/17ff5e43/attachment.sig>

Re: [PATCH 14/28] Remove MACH_SMDKC210

[Paul Bolle]

On Mon, 2014-02-10 at 14:12 +0000, Mark Brown wrote:
> On Mon, Feb 10, 2014 at 02:31:12PM +0100, Paul Bolle wrote:
> > If so, to be absolutely sure we start from the same point: do you agree
> > that the above line now effectively reads
> >     depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || false || false)
> 
> > because there's neither a Kconfig symbol MACH_SMDKV310 nor a Kconfig
> > symbol MACH_SMDKC210?
> 
> Yes, that's correct.  Now, like I say think about what the symbol was
> there for in the first place.

So, next step: the Kconfig symbols MACH_SMDKV310 and MACH_SMDKC210 were
removed in commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT for
EXYNOS SoCs"). That commit was part of v3.11. Correct?

Thanks for your patience.


Paul Bolle

[PATCH 14/28] Remove MACH_SMDKC210

[Paul Bolle]

On Mon, 2014-02-10 at 14:12 +0000, Mark Brown wrote:
> On Mon, Feb 10, 2014 at 02:31:12PM +0100, Paul Bolle wrote:
> > If so, to be absolutely sure we start from the same point: do you agree
> > that the above line now effectively reads
> >     depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || false || false)
> 
> > because there's neither a Kconfig symbol MACH_SMDKV310 nor a Kconfig
> > symbol MACH_SMDKC210?
> 
> Yes, that's correct.  Now, like I say think about what the symbol was
> there for in the first place.

So, next step: the Kconfig symbols MACH_SMDKV310 and MACH_SMDKC210 were
removed in commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT for
EXYNOS SoCs"). That commit was part of v3.11. Correct?

Thanks for your patience.


Paul Bolle

Re: [PATCH 14/28] Remove MACH_SMDKC210

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 633 bytes --]

On Mon, Feb 10, 2014 at 04:30:42PM +0100, Paul Bolle wrote:
> On Mon, 2014-02-10 at 14:12 +0000, Mark Brown wrote:

> > Yes, that's correct.  Now, like I say think about what the symbol was
> > there for in the first place.

> So, next step: the Kconfig symbols MACH_SMDKV310 and MACH_SMDKC210 were
> removed in commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT for
> EXYNOS SoCs"). That commit was part of v3.11. Correct?

Indeed, so we can see that these platforms were converted to use DT and
the symbols were removed as a result.  This means that a good fix here
is to ensure that the driver can be used with DT platforms.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 14/28] Remove MACH_SMDKC210

[Mark Brown]

On Mon, Feb 10, 2014 at 04:30:42PM +0100, Paul Bolle wrote:
> On Mon, 2014-02-10 at 14:12 +0000, Mark Brown wrote:

> > Yes, that's correct.  Now, like I say think about what the symbol was
> > there for in the first place.

> So, next step: the Kconfig symbols MACH_SMDKV310 and MACH_SMDKC210 were
> removed in commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT for
> EXYNOS SoCs"). That commit was part of v3.11. Correct?

Indeed, so we can see that these platforms were converted to use DT and
the symbols were removed as a result.  This means that a good fix here
is to ensure that the driver can be used with DT platforms.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140210/68f0308e/attachment.sig>

Re: [PATCH 14/28] Remove MACH_SMDKC210

[Paul Bolle]

On Mon, 2014-02-10 at 16:36 +0000, Mark Brown wrote:
> On Mon, Feb 10, 2014 at 04:30:42PM +0100, Paul Bolle wrote:
> > So, next step: the Kconfig symbols MACH_SMDKV310 and MACH_SMDKC210 were
> > removed in commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT for
> > EXYNOS SoCs"). That commit was part of v3.11. Correct?
> 
> Indeed, so we can see that these platforms were converted to use DT and
> the symbols were removed as a result.  This means that a good fix here
> is to ensure that the driver can be used with DT platforms.

One of the problems I face is that I find it hard to understand how this
stuff works in v3.10 (ie, before MACH_SMDKV310 and MACH_SMDKC210 were
dropped).

See, if you scan v3.10:arch/arm/mach-exynos/mach-smdkv310.c you'll
notice the string "smdk-audio". If you grep that string you get a few
hits. But none in v3.10:sound/soc/samsung/smdk_wm9713.c. And if you scan
v3.10:sound/soc/samsung/smdk_wm9713.c for strings you'll find stuff like
"wm9713-hifi",  "wm9713-codec", and "soc-audio". But these don't show up
in v3.10:arch/arm/mach-exynos/mach-smdkv310.c. So it's not obvious how
these two files relate.

And I'm left wondering why SND_SOC_SAMSUNG_SMDK_WM9713 actually depends
on (among other symbols) MACH_SMDKV310 and MACH_SMDKC210 in v3.10.


Paul Bolle

[PATCH 14/28] Remove MACH_SMDKC210

[Paul Bolle]

On Mon, 2014-02-10 at 16:36 +0000, Mark Brown wrote:
> On Mon, Feb 10, 2014 at 04:30:42PM +0100, Paul Bolle wrote:
> > So, next step: the Kconfig symbols MACH_SMDKV310 and MACH_SMDKC210 were
> > removed in commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT for
> > EXYNOS SoCs"). That commit was part of v3.11. Correct?
> 
> Indeed, so we can see that these platforms were converted to use DT and
> the symbols were removed as a result.  This means that a good fix here
> is to ensure that the driver can be used with DT platforms.

One of the problems I face is that I find it hard to understand how this
stuff works in v3.10 (ie, before MACH_SMDKV310 and MACH_SMDKC210 were
dropped).

See, if you scan v3.10:arch/arm/mach-exynos/mach-smdkv310.c you'll
notice the string "smdk-audio". If you grep that string you get a few
hits. But none in v3.10:sound/soc/samsung/smdk_wm9713.c. And if you scan
v3.10:sound/soc/samsung/smdk_wm9713.c for strings you'll find stuff like
"wm9713-hifi",  "wm9713-codec", and "soc-audio". But these don't show up
in v3.10:arch/arm/mach-exynos/mach-smdkv310.c. So it's not obvious how
these two files relate.

And I'm left wondering why SND_SOC_SAMSUNG_SMDK_WM9713 actually depends
on (among other symbols) MACH_SMDKV310 and MACH_SMDKC210 in v3.10.


Paul Bolle

Re: [PATCH 14/28] Remove MACH_SMDKC210

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 877 bytes --]

On Mon, Feb 10, 2014 at 11:09:19PM +0100, Paul Bolle wrote:

> See, if you scan v3.10:arch/arm/mach-exynos/mach-smdkv310.c you'll
> notice the string "smdk-audio". If you grep that string you get a few
> hits. But none in v3.10:sound/soc/samsung/smdk_wm9713.c. And if you scan
> v3.10:sound/soc/samsung/smdk_wm9713.c for strings you'll find stuff like
> "wm9713-hifi",  "wm9713-codec", and "soc-audio". But these don't show up
> in v3.10:arch/arm/mach-exynos/mach-smdkv310.c. So it's not obvious how
> these two files relate.

> And I'm left wondering why SND_SOC_SAMSUNG_SMDK_WM9713 actually depends
> on (among other symbols) MACH_SMDKV310 and MACH_SMDKC210 in v3.10.

The hardware is physically present on those boards but must be selected
with DIP switches, the device registration needs to be changed in the
kernel when that happens (as the DT must be when it is in use).

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 14/28] Remove MACH_SMDKC210

[Mark Brown]

On Mon, Feb 10, 2014 at 11:09:19PM +0100, Paul Bolle wrote:

> See, if you scan v3.10:arch/arm/mach-exynos/mach-smdkv310.c you'll
> notice the string "smdk-audio". If you grep that string you get a few
> hits. But none in v3.10:sound/soc/samsung/smdk_wm9713.c. And if you scan
> v3.10:sound/soc/samsung/smdk_wm9713.c for strings you'll find stuff like
> "wm9713-hifi",  "wm9713-codec", and "soc-audio". But these don't show up
> in v3.10:arch/arm/mach-exynos/mach-smdkv310.c. So it's not obvious how
> these two files relate.

> And I'm left wondering why SND_SOC_SAMSUNG_SMDK_WM9713 actually depends
> on (among other symbols) MACH_SMDKV310 and MACH_SMDKC210 in v3.10.

The hardware is physically present on those boards but must be selected
with DIP switches, the device registration needs to be changed in the
kernel when that happens (as the DT must be when it is in use).
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/33499d57/attachment.sig>

Re: [PATCH 14/28] Remove MACH_SMDKC210

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 877 bytes --]

On Mon, Feb 10, 2014 at 11:09:19PM +0100, Paul Bolle wrote:

> See, if you scan v3.10:arch/arm/mach-exynos/mach-smdkv310.c you'll
> notice the string "smdk-audio". If you grep that string you get a few
> hits. But none in v3.10:sound/soc/samsung/smdk_wm9713.c. And if you scan
> v3.10:sound/soc/samsung/smdk_wm9713.c for strings you'll find stuff like
> "wm9713-hifi",  "wm9713-codec", and "soc-audio". But these don't show up
> in v3.10:arch/arm/mach-exynos/mach-smdkv310.c. So it's not obvious how
> these two files relate.

> And I'm left wondering why SND_SOC_SAMSUNG_SMDK_WM9713 actually depends
> on (among other symbols) MACH_SMDKV310 and MACH_SMDKC210 in v3.10.

The hardware is physically present on those boards but must be selected
with DIP switches, the device registration needs to be changed in the
kernel when that happens (as the DT must be when it is in use).

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH 14/28] Remove MACH_SMDKC210

[Paul Bolle]

On Wed, 2014-02-12 at 16:04 +0000, Mark Brown wrote:
> On Mon, Feb 10, 2014 at 11:09:19PM +0100, Paul Bolle wrote:
> > See, if you scan v3.10:arch/arm/mach-exynos/mach-smdkv310.c you'll
> > notice the string "smdk-audio". If you grep that string you get a few
> > hits. But none in v3.10:sound/soc/samsung/smdk_wm9713.c. And if you scan
> > v3.10:sound/soc/samsung/smdk_wm9713.c for strings you'll find stuff like
> > "wm9713-hifi",  "wm9713-codec", and "soc-audio". But these don't show up
> > in v3.10:arch/arm/mach-exynos/mach-smdkv310.c. So it's not obvious how
> > these two files relate.
> 
> > And I'm left wondering why SND_SOC_SAMSUNG_SMDK_WM9713 actually depends
> > on (among other symbols) MACH_SMDKV310 and MACH_SMDKC210 in v3.10.
> 
> The hardware is physically present on those boards but must be selected
> with DIP switches, the device registration needs to be changed in the
> kernel when that happens (as the DT must be when it is in use).

In v3.14-rc4 these two symbols suddenly got removed, see commit
eaff64705dd5 ("ASoC: samsung: Remove invalid dependencies"). It does
exactly what I proposed last year, see
https://lkml.org/lkml/2013/7/14/27 . (That link currently shows a rather
empty page; is lkml.org having problems again?)

That commit is fine with me, of course. I now see no reason to continue
my, rather slowly progressing, search for the problem that you wanted to
get properly fixed. I suppose another commit already fixed it.

Thanks,


Paul Bolle

[PATCH 14/28] Remove MACH_SMDKC210

[Paul Bolle]

On Wed, 2014-02-12 at 16:04 +0000, Mark Brown wrote:
> On Mon, Feb 10, 2014 at 11:09:19PM +0100, Paul Bolle wrote:
> > See, if you scan v3.10:arch/arm/mach-exynos/mach-smdkv310.c you'll
> > notice the string "smdk-audio". If you grep that string you get a few
> > hits. But none in v3.10:sound/soc/samsung/smdk_wm9713.c. And if you scan
> > v3.10:sound/soc/samsung/smdk_wm9713.c for strings you'll find stuff like
> > "wm9713-hifi",  "wm9713-codec", and "soc-audio". But these don't show up
> > in v3.10:arch/arm/mach-exynos/mach-smdkv310.c. So it's not obvious how
> > these two files relate.
> 
> > And I'm left wondering why SND_SOC_SAMSUNG_SMDK_WM9713 actually depends
> > on (among other symbols) MACH_SMDKV310 and MACH_SMDKC210 in v3.10.
> 
> The hardware is physically present on those boards but must be selected
> with DIP switches, the device registration needs to be changed in the
> kernel when that happens (as the DT must be when it is in use).

In v3.14-rc4 these two symbols suddenly got removed, see commit
eaff64705dd5 ("ASoC: samsung: Remove invalid dependencies"). It does
exactly what I proposed last year, see
https://lkml.org/lkml/2013/7/14/27 . (That link currently shows a rather
empty page; is lkml.org having problems again?)

That commit is fine with me, of course. I now see no reason to continue
my, rather slowly progressing, search for the problem that you wanted to
get properly fixed. I suppose another commit already fixed it.

Thanks,


Paul Bolle

Re: [PATCH 14/28] Remove MACH_SMDKC210

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 959 bytes --]

On Fri, Feb 28, 2014 at 10:43:09PM +0100, Paul Bolle wrote:

> That commit is fine with me, of course. I now see no reason to continue
> my, rather slowly progressing, search for the problem that you wanted to
> get properly fixed. I suppose another commit already fixed it.

No, but it's someone from Samsung (Sachin works with the Samsung landing
team at Linaro) not caring about those drivers on these boards any more
and mentioning the DT conversion which is rather different to someone
doing mechanical cleanup with no mention of where the symbols went.

It should be fairly obvious that if the reason symbols are being removed
due to DT conversion of the platforms then the default thing should be
that the drivers be being converted to DT and appropriate DT entries
being added to the board DTS files, but more generally the important
thing is that some understanding is shown as to why the symbols vanished
and why the mechanical fix suggested is OK.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 14/28] Remove MACH_SMDKC210

[Mark Brown]

On Fri, Feb 28, 2014 at 10:43:09PM +0100, Paul Bolle wrote:

> That commit is fine with me, of course. I now see no reason to continue
> my, rather slowly progressing, search for the problem that you wanted to
> get properly fixed. I suppose another commit already fixed it.

No, but it's someone from Samsung (Sachin works with the Samsung landing
team at Linaro) not caring about those drivers on these boards any more
and mentioning the DT conversion which is rather different to someone
doing mechanical cleanup with no mention of where the symbols went.

It should be fairly obvious that if the reason symbols are being removed
due to DT conversion of the platforms then the default thing should be
that the drivers be being converted to DT and appropriate DT entries
being added to the board DTS files, but more generally the important
thing is that some understanding is shown as to why the symbols vanished
and why the mechanical fix suggested is OK.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140301/eb650b52/attachment.sig>

Re: [PATCH 14/28] Remove MACH_SMDKC210

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 959 bytes --]

On Fri, Feb 28, 2014 at 10:43:09PM +0100, Paul Bolle wrote:

> That commit is fine with me, of course. I now see no reason to continue
> my, rather slowly progressing, search for the problem that you wanted to
> get properly fixed. I suppose another commit already fixed it.

No, but it's someone from Samsung (Sachin works with the Samsung landing
team at Linaro) not caring about those drivers on these boards any more
and mentioning the DT conversion which is rather different to someone
doing mechanical cleanup with no mention of where the symbols went.

It should be fairly obvious that if the reason symbols are being removed
due to DT conversion of the platforms then the default thing should be
that the drivers be being converted to DT and appropriate DT entries
being added to the board DTS files, but more generally the important
thing is that some understanding is shown as to why the symbols vanished
and why the mechanical fix suggested is OK.

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

[PATCH 15/28] Remove TI_AEMIF

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/mtd/nand/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 90ff447..a195d57 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -465,7 +465,7 @@ config MTD_NAND_SH_FLCTL
 
 config MTD_NAND_DAVINCI
         tristate "Support NAND on DaVinci/Keystone SoC"
-        depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
+        depends on ARCH_DAVINCI || ARCH_KEYSTONE
         help
 	  Enable the driver for NAND flash chips on Texas Instruments
 	  DaVinci/Keystone processors.
-- 
1.8.4.2

Re: [PATCH 15/28] Remove TI_AEMIF

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  drivers/mtd/nand/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index 90ff447..a195d57 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -465,7 +465,7 @@ config MTD_NAND_SH_FLCTL
>  
>  config MTD_NAND_DAVINCI
>          tristate "Support NAND on DaVinci/Keystone SoC"
> -        depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
> +        depends on ARCH_DAVINCI || ARCH_KEYSTONE
>          help
>  	  Enable the driver for NAND flash chips on Texas Instruments
>  	  DaVinci/Keystone processors.

What's strange about the current dependency is that the only aemif code
I could find lives at arch/arm/mach-davinci/aemif.c. Is that reachable
for code in arch/arm/mach-keystone?


Paul Bolle

Re: [PATCH 15/28] Remove TI_AEMIF

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  drivers/mtd/nand/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index 90ff447..a195d57 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -465,7 +465,7 @@ config MTD_NAND_SH_FLCTL
>  
>  config MTD_NAND_DAVINCI
>          tristate "Support NAND on DaVinci/Keystone SoC"
> -        depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
> +        depends on ARCH_DAVINCI || ARCH_KEYSTONE
>          help
>  	  Enable the driver for NAND flash chips on Texas Instruments
>  	  DaVinci/Keystone processors.

What's strange about the current dependency is that the only aemif code
I could find lives at arch/arm/mach-davinci/aemif.c. Is that reachable
for code in arch/arm/mach-keystone?


Paul Bolle

Re: [PATCH 15/28] Remove TI_AEMIF

[Brian Norris]

+ Ivan, others

On Sun, Feb 09, 2014 at 09:54:02PM +0100, Paul Bolle wrote:
> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> > The symbol is an orphan, get rid of it.
> > 
> > Signed-off-by: Richard Weinberger <richard@nod.at>
> > ---
> >  drivers/mtd/nand/Kconfig | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> > index 90ff447..a195d57 100644
> > --- a/drivers/mtd/nand/Kconfig
> > +++ b/drivers/mtd/nand/Kconfig
> > @@ -465,7 +465,7 @@ config MTD_NAND_SH_FLCTL
> >  
> >  config MTD_NAND_DAVINCI
> >          tristate "Support NAND on DaVinci/Keystone SoC"
> > -        depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
> > +        depends on ARCH_DAVINCI || ARCH_KEYSTONE
> >          help
> >  	  Enable the driver for NAND flash chips on Texas Instruments
> >  	  DaVinci/Keystone processors.
> 
> What's strange about the current dependency is that the only aemif code
> I could find lives at arch/arm/mach-davinci/aemif.c. Is that reachable
> for code in arch/arm/mach-keystone?

It looks like I merged this code before the supporting aemif driver [1] was
merged. I think this is harmless, and so I plan to leave it as-is for
now. Or if Ivan prefers, I can drop the Keystone dependency entirely
until it is ready.

https://lkml.org/lkml/2013/11/20/283

Brian

Re: [PATCH 15/28] Remove TI_AEMIF

[Brian Norris]

+ Ivan, others

On Sun, Feb 09, 2014 at 09:54:02PM +0100, Paul Bolle wrote:
> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> > The symbol is an orphan, get rid of it.
> > 
> > Signed-off-by: Richard Weinberger <richard@nod.at>
> > ---
> >  drivers/mtd/nand/Kconfig | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> > index 90ff447..a195d57 100644
> > --- a/drivers/mtd/nand/Kconfig
> > +++ b/drivers/mtd/nand/Kconfig
> > @@ -465,7 +465,7 @@ config MTD_NAND_SH_FLCTL
> >  
> >  config MTD_NAND_DAVINCI
> >          tristate "Support NAND on DaVinci/Keystone SoC"
> > -        depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
> > +        depends on ARCH_DAVINCI || ARCH_KEYSTONE
> >          help
> >  	  Enable the driver for NAND flash chips on Texas Instruments
> >  	  DaVinci/Keystone processors.
> 
> What's strange about the current dependency is that the only aemif code
> I could find lives at arch/arm/mach-davinci/aemif.c. Is that reachable
> for code in arch/arm/mach-keystone?

It looks like I merged this code before the supporting aemif driver [1] was
merged. I think this is harmless, and so I plan to leave it as-is for
now. Or if Ivan prefers, I can drop the Keystone dependency entirely
until it is ready.

https://lkml.org/lkml/2013/11/20/283

Brian

Re: [PATCH 15/28] Remove TI_AEMIF

[Ivan Khoronzhuk]

On 02/11/2014 09:04 PM, Brian Norris wrote:
> + Ivan, others
>
> On Sun, Feb 09, 2014 at 09:54:02PM +0100, Paul Bolle wrote:
>> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
>>> The symbol is an orphan, get rid of it.
>>>
>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>> ---
>>>   drivers/mtd/nand/Kconfig | 2 +-
>>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
>>> index 90ff447..a195d57 100644
>>> --- a/drivers/mtd/nand/Kconfig
>>> +++ b/drivers/mtd/nand/Kconfig
>>> @@ -465,7 +465,7 @@ config MTD_NAND_SH_FLCTL
>>>   
>>>   config MTD_NAND_DAVINCI
>>>           tristate "Support NAND on DaVinci/Keystone SoC"
>>> -        depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
>>> +        depends on ARCH_DAVINCI || ARCH_KEYSTONE
>>>           help
>>>   	  Enable the driver for NAND flash chips on Texas Instruments
>>>   	  DaVinci/Keystone processors.
>> What's strange about the current dependency is that the only aemif code
>> I could find lives at arch/arm/mach-davinci/aemif.c. Is that reachable
>> for code in arch/arm/mach-keystone?
> It looks like I merged this code before the supporting aemif driver [1] was
> merged. I think this is harmless, and so I plan to leave it as-is for
> now. Or if Ivan prefers, I can drop the Keystone dependency entirely
> until it is ready.
>
> https://lkml.org/lkml/2013/11/20/283
>
> Brian

It is harmless.

For Keystone NAND depends on AEMIF.
AEMIF is responsible to set timings.

In case of Davinci the timings are set by arch/arm/mach-davinci/aemif.c.
In case of Keystone the timings are going to be set by AEMIF driver.

AEMIF is going to be merged I hope. That's plan.

So you can leave it.

-- 
Regards,
Ivan Khoronzhuk

Re: [PATCH 15/28] Remove TI_AEMIF

[Ivan Khoronzhuk]

On 02/11/2014 09:04 PM, Brian Norris wrote:
> + Ivan, others
>
> On Sun, Feb 09, 2014 at 09:54:02PM +0100, Paul Bolle wrote:
>> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
>>> The symbol is an orphan, get rid of it.
>>>
>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>> ---
>>>   drivers/mtd/nand/Kconfig | 2 +-
>>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
>>> index 90ff447..a195d57 100644
>>> --- a/drivers/mtd/nand/Kconfig
>>> +++ b/drivers/mtd/nand/Kconfig
>>> @@ -465,7 +465,7 @@ config MTD_NAND_SH_FLCTL
>>>   
>>>   config MTD_NAND_DAVINCI
>>>           tristate "Support NAND on DaVinci/Keystone SoC"
>>> -        depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
>>> +        depends on ARCH_DAVINCI || ARCH_KEYSTONE
>>>           help
>>>   	  Enable the driver for NAND flash chips on Texas Instruments
>>>   	  DaVinci/Keystone processors.
>> What's strange about the current dependency is that the only aemif code
>> I could find lives at arch/arm/mach-davinci/aemif.c. Is that reachable
>> for code in arch/arm/mach-keystone?
> It looks like I merged this code before the supporting aemif driver [1] was
> merged. I think this is harmless, and so I plan to leave it as-is for
> now. Or if Ivan prefers, I can drop the Keystone dependency entirely
> until it is ready.
>
> https://lkml.org/lkml/2013/11/20/283
>
> Brian

It is harmless.

For Keystone NAND depends on AEMIF.
AEMIF is responsible to set timings.

In case of Davinci the timings are set by arch/arm/mach-davinci/aemif.c.
In case of Keystone the timings are going to be set by AEMIF driver.

AEMIF is going to be merged I hope. That's plan.

So you can leave it.

-- 
Regards,
Ivan Khoronzhuk

[PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/score/Kconfig | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index c75d06a..c7a7b65 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -23,19 +23,16 @@ config ARCH_SCORE7
 	bool "SCORE7 processor"
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select CPU_SCORE7
-	select GENERIC_HAS_IOMAP
 
 config MACH_SPCT6600
 	bool "SPCT6600 series based machines"
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select CPU_SCORE7
-	select GENERIC_HAS_IOMAP
 
 config SCORE_SIM
 	bool "Score simulator"
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select CPU_SCORE7
-	select GENERIC_HAS_IOMAP
 endchoice
 
 endmenu
-- 
1.8.4.2

Re: [PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  arch/score/Kconfig | 3 ---
>  1 file changed, 3 deletions(-)
> 
> diff --git a/arch/score/Kconfig b/arch/score/Kconfig
> index c75d06a..c7a7b65 100644
> --- a/arch/score/Kconfig
> +++ b/arch/score/Kconfig
> @@ -23,19 +23,16 @@ config ARCH_SCORE7
>  	bool "SCORE7 processor"
>  	select SYS_SUPPORTS_32BIT_KERNEL
>  	select CPU_SCORE7
> -	select GENERIC_HAS_IOMAP
>  
>  config MACH_SPCT6600
>  	bool "SPCT6600 series based machines"
>  	select SYS_SUPPORTS_32BIT_KERNEL
>  	select CPU_SCORE7
> -	select GENERIC_HAS_IOMAP
>  
>  config SCORE_SIM
>  	bool "Score simulator"
>  	select SYS_SUPPORTS_32BIT_KERNEL
>  	select CPU_SCORE7
> -	select GENERIC_HAS_IOMAP
>  endchoice
>  
>  endmenu

Actually, all these select statements can be dropped. I sent a patch to
do that about a year ago (but the link to that patch on lkml.org seems
empty: https://lkml.org/lkml/2013/3/6/167 ).

Good luck in getting a reply from the score maintainers. I never got
one.


Paul Bolle

Re: [PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Guenter Roeck]

On 02/09/2014 12:59 PM, Paul Bolle wrote:
> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
>> The symbol is an orphan, get rid of it.
>>
>> Signed-off-by: Richard Weinberger <richard@nod.at>
>> ---
>>   arch/score/Kconfig | 3 ---
>>   1 file changed, 3 deletions(-)
>>
>> diff --git a/arch/score/Kconfig b/arch/score/Kconfig
>> index c75d06a..c7a7b65 100644
>> --- a/arch/score/Kconfig
>> +++ b/arch/score/Kconfig
>> @@ -23,19 +23,16 @@ config ARCH_SCORE7
>>   	bool "SCORE7 processor"
>>   	select SYS_SUPPORTS_32BIT_KERNEL
>>   	select CPU_SCORE7
>> -	select GENERIC_HAS_IOMAP
>>
>>   config MACH_SPCT6600
>>   	bool "SPCT6600 series based machines"
>>   	select SYS_SUPPORTS_32BIT_KERNEL
>>   	select CPU_SCORE7
>> -	select GENERIC_HAS_IOMAP
>>
>>   config SCORE_SIM
>>   	bool "Score simulator"
>>   	select SYS_SUPPORTS_32BIT_KERNEL
>>   	select CPU_SCORE7
>> -	select GENERIC_HAS_IOMAP
>>   endchoice
>>
>>   endmenu
>
> Actually, all these select statements can be dropped. I sent a patch to
> do that about a year ago (but the link to that patch on lkml.org seems
> empty: https://lkml.org/lkml/2013/3/6/167 ).
>
> Good luck in getting a reply from the score maintainers. I never got
> one.
>

You could (and maybe should) try again. They maintainers have been
a bit more responsive after I suggested to remove the architecture.

Guenter

Re: [PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Lennox Wu]

Thanks.

Acked-by: Lennox Wu <lennox.wu@gmail.com>

2014-02-10 2:47 GMT+08:00 Richard Weinberger <richard@nod.at>:
> The symbol is an orphan, get rid of it.
>
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  arch/score/Kconfig | 3 ---
>  1 file changed, 3 deletions(-)
>
> diff --git a/arch/score/Kconfig b/arch/score/Kconfig
> index c75d06a..c7a7b65 100644
> --- a/arch/score/Kconfig
> +++ b/arch/score/Kconfig
> @@ -23,19 +23,16 @@ config ARCH_SCORE7
>         bool "SCORE7 processor"
>         select SYS_SUPPORTS_32BIT_KERNEL
>         select CPU_SCORE7
> -       select GENERIC_HAS_IOMAP
>
>  config MACH_SPCT6600
>         bool "SPCT6600 series based machines"
>         select SYS_SUPPORTS_32BIT_KERNEL
>         select CPU_SCORE7
> -       select GENERIC_HAS_IOMAP
>
>  config SCORE_SIM
>         bool "Score simulator"
>         select SYS_SUPPORTS_32BIT_KERNEL
>         select CPU_SCORE7
> -       select GENERIC_HAS_IOMAP
>  endchoice
>
>  endmenu
> --
> 1.8.4.2
>

Re: [PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Paul Bolle]

On Mon, 2014-02-10 at 10:24 +0800, Lennox Wu wrote:
> Thanks.
> 
> Acked-by: Lennox Wu <lennox.wu@gmail.com>

I don't think this oneliner is queued somewhere. Lennox, you're listed
as one of the score maintainers: could you perhaps queue this patch?


Paul Bolle

> 2014-02-10 2:47 GMT+08:00 Richard Weinberger <richard@nod.at>:
> > The symbol is an orphan, get rid of it.
> >
> > Signed-off-by: Richard Weinberger <richard@nod.at>
> > ---
> >  arch/score/Kconfig | 3 ---
> >  1 file changed, 3 deletions(-)
> >
> > diff --git a/arch/score/Kconfig b/arch/score/Kconfig
> > index c75d06a..c7a7b65 100644
> > --- a/arch/score/Kconfig
> > +++ b/arch/score/Kconfig
> > @@ -23,19 +23,16 @@ config ARCH_SCORE7
> >         bool "SCORE7 processor"
> >         select SYS_SUPPORTS_32BIT_KERNEL
> >         select CPU_SCORE7
> > -       select GENERIC_HAS_IOMAP
> >
> >  config MACH_SPCT6600
> >         bool "SPCT6600 series based machines"
> >         select SYS_SUPPORTS_32BIT_KERNEL
> >         select CPU_SCORE7
> > -       select GENERIC_HAS_IOMAP
> >
> >  config SCORE_SIM
> >         bool "Score simulator"
> >         select SYS_SUPPORTS_32BIT_KERNEL
> >         select CPU_SCORE7
> > -       select GENERIC_HAS_IOMAP
> >  endchoice
> >
> >  endmenu
> > --
> > 1.8.4.2

Re: [PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Lennox Wu]

Hi Pual,
OK, we will merge it into our tree.

Best,
Lennox

2014-04-15 17:19 GMT+08:00 Paul Bolle <pebolle@tiscali.nl>:
> On Mon, 2014-02-10 at 10:24 +0800, Lennox Wu wrote:
>> Thanks.
>>
>> Acked-by: Lennox Wu <lennox.wu@gmail.com>
>
> I don't think this oneliner is queued somewhere. Lennox, you're listed
> as one of the score maintainers: could you perhaps queue this patch?
>
>
> Paul Bolle
>
>> 2014-02-10 2:47 GMT+08:00 Richard Weinberger <richard@nod.at>:
>> > The symbol is an orphan, get rid of it.
>> >
>> > Signed-off-by: Richard Weinberger <richard@nod.at>
>> > ---
>> >  arch/score/Kconfig | 3 ---
>> >  1 file changed, 3 deletions(-)
>> >
>> > diff --git a/arch/score/Kconfig b/arch/score/Kconfig
>> > index c75d06a..c7a7b65 100644
>> > --- a/arch/score/Kconfig
>> > +++ b/arch/score/Kconfig
>> > @@ -23,19 +23,16 @@ config ARCH_SCORE7
>> >         bool "SCORE7 processor"
>> >         select SYS_SUPPORTS_32BIT_KERNEL
>> >         select CPU_SCORE7
>> > -       select GENERIC_HAS_IOMAP
>> >
>> >  config MACH_SPCT6600
>> >         bool "SPCT6600 series based machines"
>> >         select SYS_SUPPORTS_32BIT_KERNEL
>> >         select CPU_SCORE7
>> > -       select GENERIC_HAS_IOMAP
>> >
>> >  config SCORE_SIM
>> >         bool "Score simulator"
>> >         select SYS_SUPPORTS_32BIT_KERNEL
>> >         select CPU_SCORE7
>> > -       select GENERIC_HAS_IOMAP
>> >  endchoice
>> >
>> >  endmenu
>> > --
>> > 1.8.4.2
>

Re: [PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Paul Bolle]

On Thu, 2014-04-17 at 01:29 +0800, Lennox Wu wrote:
> OK, we will merge it into our tree.

Thanks!


Paul Bolle

Re: [PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Paul Bolle]

Lennox,

On Wed, 2014-04-16 at 20:30 +0200, Paul Bolle wrote:
> On Thu, 2014-04-17 at 01:29 +0800, Lennox Wu wrote:
> > OK, we will merge it into our tree.

The last few messages in this thread were sent shortly after v3.15-rc1.
We're now at v3.16-rc1 and those three references to GENERIC_HAS_IOMAP
are still there.

Are there any issues with this patch?


Paul Bolle

Re: [PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Lennox Wu]

NO, there is no issue. We just want to push patches in a batched way.
The patch will show recently. Thank you.

Best,
Lennox

2014-06-18 17:10 GMT+08:00 Paul Bolle <pebolle@tiscali.nl>:
> Lennox,
>
> On Wed, 2014-04-16 at 20:30 +0200, Paul Bolle wrote:
>> On Thu, 2014-04-17 at 01:29 +0800, Lennox Wu wrote:
>> > OK, we will merge it into our tree.
>
> The last few messages in this thread were sent shortly after v3.15-rc1.
> We're now at v3.16-rc1 and those three references to GENERIC_HAS_IOMAP
> are still there.
>
> Are there any issues with this patch?
>
>
> Paul Bolle
>

Re: [PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Paul Bolle]

Guenter, Richard,

On Thu, 2014-06-19 at 03:53 +0800, Lennox Wu wrote:
> 2014-06-18 17:10 GMT+08:00 Paul Bolle <pebolle@tiscali.nl>:
> >> On Wed, 2014-04-16 at 20:30 +0200, Paul Bolle wrote:
> >> On Thu, 2014-04-17 at 01:29 +0800, Lennox Wu wrote:
> >> > OK, we will merge it into our tree.
> >
> > The last few messages in this thread were sent shortly after v3.15-rc1.
> > We're now at v3.16-rc1 and those three references to GENERIC_HAS_IOMAP
> > are still there.
> >
> > Are there any issues with this patch?
> >
> >
> > Paul Bolle
> >
> NO, there is no issue. We just want to push patches in a batched way.
> The patch will show recently. Thank you.

And at v3.17-rc3 this patch has still not shown up in mainline. Do you
have suggestions for an alternative route to get this triviality finally
merged?


Paul Bolle

Re: [PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Guenter Roeck]

On 09/05/2014 02:32 AM, Paul Bolle wrote:
> Guenter, Richard,
>
> On Thu, 2014-06-19 at 03:53 +0800, Lennox Wu wrote:
>> 2014-06-18 17:10 GMT+08:00 Paul Bolle <pebolle@tiscali.nl>:
>>>> On Wed, 2014-04-16 at 20:30 +0200, Paul Bolle wrote:
>>>> On Thu, 2014-04-17 at 01:29 +0800, Lennox Wu wrote:
>>>>> OK, we will merge it into our tree.
>>>
>>> The last few messages in this thread were sent shortly after v3.15-rc1.
>>> We're now at v3.16-rc1 and those three references to GENERIC_HAS_IOMAP
>>> are still there.
>>>
>>> Are there any issues with this patch?
>>>
>>>
>>> Paul Bolle
>>>
>> NO, there is no issue. We just want to push patches in a batched way.
>> The patch will show recently. Thank you.
>
> And at v3.17-rc3 this patch has still not shown up in mainline. Do you
> have suggestions for an alternative route to get this triviality finally
> merged?
>

I merged it with the latest kernel, added Lennox' Ack, and sent it to
trivial@kernel.org. Let's see what happens.

Guenter

Re: [PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Richard Weinberger]

Am 05.09.2014 15:57, schrieb Guenter Roeck:
> On 09/05/2014 02:32 AM, Paul Bolle wrote:
>> Guenter, Richard,
>>
>> On Thu, 2014-06-19 at 03:53 +0800, Lennox Wu wrote:
>>> 2014-06-18 17:10 GMT+08:00 Paul Bolle <pebolle@tiscali.nl>:
>>>>> On Wed, 2014-04-16 at 20:30 +0200, Paul Bolle wrote:
>>>>> On Thu, 2014-04-17 at 01:29 +0800, Lennox Wu wrote:
>>>>>> OK, we will merge it into our tree.
>>>>
>>>> The last few messages in this thread were sent shortly after v3.15-rc1.
>>>> We're now at v3.16-rc1 and those three references to GENERIC_HAS_IOMAP
>>>> are still there.
>>>>
>>>> Are there any issues with this patch?
>>>>
>>>>
>>>> Paul Bolle
>>>>
>>> NO, there is no issue. We just want to push patches in a batched way.
>>> The patch will show recently. Thank you.
>>
>> And at v3.17-rc3 this patch has still not shown up in mainline. Do you
>> have suggestions for an alternative route to get this triviality finally
>> merged?
>>
> 
> I merged it with the latest kernel, added Lennox' Ack, and sent it to
> trivial@kernel.org. Let's see what happens.

Thanks a lot Guenther!

Re: [PATCH 16/28] Remove GENERIC_HAS_IOMAP

[Lennox Wu]

The patch was applied in our tree, but we have not issued a pull
request because other patches are still under discussion.
We might issue a pull request first.

Best,
Lennox

2014-09-05 22:00 GMT+08:00 Richard Weinberger <richard@nod.at>:
> Am 05.09.2014 15:57, schrieb Guenter Roeck:
>> On 09/05/2014 02:32 AM, Paul Bolle wrote:
>>> Guenter, Richard,
>>>
>>> On Thu, 2014-06-19 at 03:53 +0800, Lennox Wu wrote:
>>>> 2014-06-18 17:10 GMT+08:00 Paul Bolle <pebolle@tiscali.nl>:
>>>>>> On Wed, 2014-04-16 at 20:30 +0200, Paul Bolle wrote:
>>>>>> On Thu, 2014-04-17 at 01:29 +0800, Lennox Wu wrote:
>>>>>>> OK, we will merge it into our tree.
>>>>>
>>>>> The last few messages in this thread were sent shortly after v3.15-rc1.
>>>>> We're now at v3.16-rc1 and those three references to GENERIC_HAS_IOMAP
>>>>> are still there.
>>>>>
>>>>> Are there any issues with this patch?
>>>>>
>>>>>
>>>>> Paul Bolle
>>>>>
>>>> NO, there is no issue. We just want to push patches in a batched way.
>>>> The patch will show recently. Thank you.
>>>
>>> And at v3.17-rc3 this patch has still not shown up in mainline. Do you
>>> have suggestions for an alternative route to get this triviality finally
>>> merged?
>>>
>>
>> I merged it with the latest kernel, added Lennox' Ack, and sent it to
>> trivial@kernel.org. Let's see what happens.
>
> Thanks a lot Guenther!

[PATCH 17/28] Remove USE_GENERIC_SMP_HELPERS

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/xtensa/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index ba56e11..c1d69ba 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -135,7 +135,6 @@ config HAVE_SMP
 config SMP
 	bool "Enable Symmetric multi-processing support"
 	depends on HAVE_SMP
-	select USE_GENERIC_SMP_HELPERS
 	select GENERIC_SMP_IDLE_THREAD
 	help
 	  Enabled SMP Software; allows more than one CPU/CORE
-- 
1.8.4.2

Re: [PATCH 17/28] Remove USE_GENERIC_SMP_HELPERS

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  arch/xtensa/Kconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
> index ba56e11..c1d69ba 100644
> --- a/arch/xtensa/Kconfig
> +++ b/arch/xtensa/Kconfig
> @@ -135,7 +135,6 @@ config HAVE_SMP
>  config SMP
>  	bool "Enable Symmetric multi-processing support"
>  	depends on HAVE_SMP
> -	select USE_GENERIC_SMP_HELPERS
>  	select GENERIC_SMP_IDLE_THREAD
>  	help
>  	  Enabled SMP Software; allows more than one CPU/CORE

I sent an identical patch (with a more verbose explanation) a few hours
ago. But this one is OK too.


Paul Bolle

[PATCH 18/28] Remove MN10300_PROC_MN2WS0038

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/mn10300/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index a648de1..4434b54 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -181,7 +181,7 @@ endmenu
 config SMP
 	bool "Symmetric multi-processing support"
 	default y
-	depends on MN10300_PROC_MN2WS0038 || MN10300_PROC_MN2WS0050
+	depends on MN10300_PROC_MN2WS0050
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
-- 
1.8.4.2

Re: [PATCH 18/28] Remove MN10300_PROC_MN2WS0038

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

Acked-by: Paul Bolle <pebolle@tiscali.nl>

> ---
>  arch/mn10300/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
> index a648de1..4434b54 100644
> --- a/arch/mn10300/Kconfig
> +++ b/arch/mn10300/Kconfig
> @@ -181,7 +181,7 @@ endmenu
>  config SMP
>  	bool "Symmetric multi-processing support"
>  	default y
> -	depends on MN10300_PROC_MN2WS0038 || MN10300_PROC_MN2WS0050
> +	depends on MN10300_PROC_MN2WS0050
>  	---help---
>  	  This enables support for systems with more than one CPU. If you have
>  	  a system with only one CPU, say N. If you have a system with more

I tried this one too in 2013: https://lkml.org/lkml/2013/5/15/144 .


Paul Bolle

[PATCH 19/28] Remove SI4713

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/media/radio/si4713/Kconfig | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/media/radio/si4713/Kconfig b/drivers/media/radio/si4713/Kconfig
index a7c3ba8..ed51ed0 100644
--- a/drivers/media/radio/si4713/Kconfig
+++ b/drivers/media/radio/si4713/Kconfig
@@ -1,7 +1,6 @@
 config USB_SI4713
 	tristate "Silicon Labs Si4713 FM Radio Transmitter support with USB"
 	depends on USB && RADIO_SI4713
-	select SI4713
 	---help---
 	  This is a driver for USB devices with the Silicon Labs SI4713
 	  chip. Currently these devices are known to work.
@@ -16,7 +15,6 @@ config USB_SI4713
 config PLATFORM_SI4713
 	tristate "Silicon Labs Si4713 FM Radio Transmitter support with I2C"
 	depends on I2C && RADIO_SI4713
-	select SI4713
 	---help---
 	  This is a driver for I2C devices with the Silicon Labs SI4713
 	  chip.
-- 
1.8.4.2

Re: [PATCH 19/28] Remove SI4713

[Hans Verkuil]

On 02/09/2014 07:47 PM, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.

NACK.

It's not an orphan, it's a typo. It should be I2C_SI4713.

Paul, Richard, let me handle this. I'll make a patch for this tomorrow (I believe
there was a report about a missing I2C dependency as well) and make sure it ends
up in a pull request for 3.14.

Regards,

	Hans

> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  drivers/media/radio/si4713/Kconfig | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/media/radio/si4713/Kconfig b/drivers/media/radio/si4713/Kconfig
> index a7c3ba8..ed51ed0 100644
> --- a/drivers/media/radio/si4713/Kconfig
> +++ b/drivers/media/radio/si4713/Kconfig
> @@ -1,7 +1,6 @@
>  config USB_SI4713
>  	tristate "Silicon Labs Si4713 FM Radio Transmitter support with USB"
>  	depends on USB && RADIO_SI4713
> -	select SI4713
>  	---help---
>  	  This is a driver for USB devices with the Silicon Labs SI4713
>  	  chip. Currently these devices are known to work.
> @@ -16,7 +15,6 @@ config USB_SI4713
>  config PLATFORM_SI4713
>  	tristate "Silicon Labs Si4713 FM Radio Transmitter support with I2C"
>  	depends on I2C && RADIO_SI4713
> -	select SI4713
>  	---help---
>  	  This is a driver for I2C devices with the Silicon Labs SI4713
>  	  chip.
> 

Re: [PATCH 19/28] Remove SI4713

[Richard Weinberger]

Am 09.02.2014 20:13, schrieb Hans Verkuil:
> On 02/09/2014 07:47 PM, Richard Weinberger wrote:
>> The symbol is an orphan, get rid of it.
> 
> NACK.
> 
> It's not an orphan, it's a typo. It should be I2C_SI4713.
> 
> Paul, Richard, let me handle this. I'll make a patch for this tomorrow (I believe
> there was a report about a missing I2C dependency as well) and make sure it ends
> up in a pull request for 3.14.

This is perfectly fine. Thanks for sorting this out!

Thanks,
//richard

[PATCH 20/28] Remove OMAP_PM_SRF

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/staging/tidspbridge/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig
index 1b6d581..b5e74e9 100644
--- a/drivers/staging/tidspbridge/Kconfig
+++ b/drivers/staging/tidspbridge/Kconfig
@@ -17,7 +17,7 @@ menuconfig TIDSPBRIDGE
 
 config TIDSPBRIDGE_DVFS
 	bool "Enable Bridge Dynamic Voltage and Frequency Scaling (DVFS)"
-	depends on TIDSPBRIDGE && OMAP_PM_SRF && CPU_FREQ
+	depends on TIDSPBRIDGE && CPU_FREQ
 	help
 	  DVFS allows DSP Bridge to initiate the operating point change to
 	  scale the chip voltage and frequency in order to match the
-- 
1.8.4.2

Re: [PATCH 20/28] Remove OMAP_PM_SRF

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  drivers/staging/tidspbridge/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig
> index 1b6d581..b5e74e9 100644
> --- a/drivers/staging/tidspbridge/Kconfig
> +++ b/drivers/staging/tidspbridge/Kconfig
> @@ -17,7 +17,7 @@ menuconfig TIDSPBRIDGE
>  
>  config TIDSPBRIDGE_DVFS
>  	bool "Enable Bridge Dynamic Voltage and Frequency Scaling (DVFS)"
> -	depends on TIDSPBRIDGE && OMAP_PM_SRF && CPU_FREQ
> +	depends on TIDSPBRIDGE && CPU_FREQ

You're effectively enabling the TIDSPBRIDGE_DVFS code here. As far as
I'm aware that code has _never_ been buildable (ever since it got merged
in v2.6.36).

I think TIDSPBRIDGE_DVFS (and everything depending on it) might better
be removed.


Paul Bolle

>  	help
>  	  DVFS allows DSP Bridge to initiate the operating point change to
>  	  scale the chip voltage and frequency in order to match the

[PATCH 21/28] Remove CPU_SUBTYPE_SH7764

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/sh/drivers/dma/Kconfig                | 5 ++---
 arch/sh/include/cpu-sh4/cpu/dma-register.h | 1 -
 arch/sh/include/cpu-sh4a/cpu/dma.h         | 3 +--
 3 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index cfd5b90..e07afe8 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -12,9 +12,8 @@ config SH_DMA_IRQ_MULTI
 	default y if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
 		     CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
 		     CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091  || \
-		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7764  || \
-		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785  || \
-		     CPU_SUBTYPE_SH7760
+		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7780  || \
+		     CPU_SUBTYPE_SH7785  CPU_SUBTYPE_SH7760
 
 config SH_DMA_API
 	depends on SH_DMA
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
index 02788b6..9cd81e5 100644
--- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h
@@ -32,7 +32,6 @@
 #define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-	defined(CONFIG_CPU_SUBTYPE_SH7764) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7780) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define CHCR_TS_LOW_MASK	0x00000018
diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
index 89afb65..8ceccce 100644
--- a/arch/sh/include/cpu-sh4a/cpu/dma.h
+++ b/arch/sh/include/cpu-sh4a/cpu/dma.h
@@ -14,8 +14,7 @@
 #define DMTE4_IRQ	evt2irq(0xb80)
 #define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
 #define SH_DMAC_BASE0	0xFE008020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-	defined(CONFIG_CPU_SUBTYPE_SH7764)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 #define DMTE0_IRQ	evt2irq(0x640)
 #define DMTE4_IRQ	evt2irq(0x780)
 #define DMAE0_IRQ	evt2irq(0x6c0)
-- 
1.8.4.2

[PATCH 21/28] Remove CPU_SUBTYPE_SH7764

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/sh/drivers/dma/Kconfig                | 5 ++---
 arch/sh/include/cpu-sh4/cpu/dma-register.h | 1 -
 arch/sh/include/cpu-sh4a/cpu/dma.h         | 3 +--
 3 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index cfd5b90..e07afe8 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -12,9 +12,8 @@ config SH_DMA_IRQ_MULTI
 	default y if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
 		     CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
 		     CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091  || \
-		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7764  || \
-		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785  || \
-		     CPU_SUBTYPE_SH7760
+		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7780  || \
+		     CPU_SUBTYPE_SH7785  CPU_SUBTYPE_SH7760
 
 config SH_DMA_API
 	depends on SH_DMA
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
index 02788b6..9cd81e5 100644
--- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h
@@ -32,7 +32,6 @@
 #define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-	defined(CONFIG_CPU_SUBTYPE_SH7764) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7780) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define CHCR_TS_LOW_MASK	0x00000018
diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
index 89afb65..8ceccce 100644
--- a/arch/sh/include/cpu-sh4a/cpu/dma.h
+++ b/arch/sh/include/cpu-sh4a/cpu/dma.h
@@ -14,8 +14,7 @@
 #define DMTE4_IRQ	evt2irq(0xb80)
 #define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
 #define SH_DMAC_BASE0	0xFE008020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-	defined(CONFIG_CPU_SUBTYPE_SH7764)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 #define DMTE0_IRQ	evt2irq(0x640)
 #define DMTE4_IRQ	evt2irq(0x780)
 #define DMAE0_IRQ	evt2irq(0x6c0)
-- 
1.8.4.2

Re: [PATCH 21/28] Remove CPU_SUBTYPE_SH7764

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

Paul Mundt had something similar queued a year ago:
https://lkml.org/lkml/2013/3/11/211 . What happened?


Paul Bolle

>  arch/sh/drivers/dma/Kconfig                | 5 ++---
>  arch/sh/include/cpu-sh4/cpu/dma-register.h | 1 -
>  arch/sh/include/cpu-sh4a/cpu/dma.h         | 3 +--
>  3 files changed, 3 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
> index cfd5b90..e07afe8 100644
> --- a/arch/sh/drivers/dma/Kconfig
> +++ b/arch/sh/drivers/dma/Kconfig
> @@ -12,9 +12,8 @@ config SH_DMA_IRQ_MULTI
>  	default y if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
>  		     CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
>  		     CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091  || \
> -		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7764  || \
> -		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785  || \
> -		     CPU_SUBTYPE_SH7760
> +		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7780  || \
> +		     CPU_SUBTYPE_SH7785  CPU_SUBTYPE_SH7760
>  
>  config SH_DMA_API
>  	depends on SH_DMA
> diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
> index 02788b6..9cd81e5 100644
> --- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
> +++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h
> @@ -32,7 +32,6 @@
>  #define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
>  #elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
>  	defined(CONFIG_CPU_SUBTYPE_SH7763) || \
> -	defined(CONFIG_CPU_SUBTYPE_SH7764) || \
>  	defined(CONFIG_CPU_SUBTYPE_SH7780) || \
>  	defined(CONFIG_CPU_SUBTYPE_SH7785)
>  #define CHCR_TS_LOW_MASK	0x00000018
> diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
> index 89afb65..8ceccce 100644
> --- a/arch/sh/include/cpu-sh4a/cpu/dma.h
> +++ b/arch/sh/include/cpu-sh4a/cpu/dma.h
> @@ -14,8 +14,7 @@
>  #define DMTE4_IRQ	evt2irq(0xb80)
>  #define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
>  #define SH_DMAC_BASE0	0xFE008020
> -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
> -	defined(CONFIG_CPU_SUBTYPE_SH7764)
> +#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
>  #define DMTE0_IRQ	evt2irq(0x640)
>  #define DMTE4_IRQ	evt2irq(0x780)
>  #define DMAE0_IRQ	evt2irq(0x6c0)

Re: [PATCH 21/28] Remove CPU_SUBTYPE_SH7764

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

Paul Mundt had something similar queued a year ago:
https://lkml.org/lkml/2013/3/11/211 . What happened?


Paul Bolle

>  arch/sh/drivers/dma/Kconfig                | 5 ++---
>  arch/sh/include/cpu-sh4/cpu/dma-register.h | 1 -
>  arch/sh/include/cpu-sh4a/cpu/dma.h         | 3 +--
>  3 files changed, 3 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
> index cfd5b90..e07afe8 100644
> --- a/arch/sh/drivers/dma/Kconfig
> +++ b/arch/sh/drivers/dma/Kconfig
> @@ -12,9 +12,8 @@ config SH_DMA_IRQ_MULTI
>  	default y if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
>  		     CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
>  		     CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091  || \
> -		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7764  || \
> -		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785  || \
> -		     CPU_SUBTYPE_SH7760
> +		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7780  || \
> +		     CPU_SUBTYPE_SH7785  CPU_SUBTYPE_SH7760
>  
>  config SH_DMA_API
>  	depends on SH_DMA
> diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
> index 02788b6..9cd81e5 100644
> --- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
> +++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h
> @@ -32,7 +32,6 @@
>  #define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
>  #elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
>  	defined(CONFIG_CPU_SUBTYPE_SH7763) || \
> -	defined(CONFIG_CPU_SUBTYPE_SH7764) || \
>  	defined(CONFIG_CPU_SUBTYPE_SH7780) || \
>  	defined(CONFIG_CPU_SUBTYPE_SH7785)
>  #define CHCR_TS_LOW_MASK	0x00000018
> diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
> index 89afb65..8ceccce 100644
> --- a/arch/sh/include/cpu-sh4a/cpu/dma.h
> +++ b/arch/sh/include/cpu-sh4a/cpu/dma.h
> @@ -14,8 +14,7 @@
>  #define DMTE4_IRQ	evt2irq(0xb80)
>  #define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
>  #define SH_DMAC_BASE0	0xFE008020
> -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
> -	defined(CONFIG_CPU_SUBTYPE_SH7764)
> +#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
>  #define DMTE0_IRQ	evt2irq(0x640)
>  #define DMTE4_IRQ	evt2irq(0x780)
>  #define DMAE0_IRQ	evt2irq(0x6c0)

Re: [PATCH 21/28] Remove CPU_SUBTYPE_SH7764

[Paul Bolle]

On Sun, 2014-02-09 at 22:36 +0100, Paul Bolle wrote:
> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> > The symbol is an orphan, get rid of it.
> > 
> > Signed-off-by: Richard Weinberger <richard@nod.at>
> 
> Paul Mundt had something similar queued a year ago:
> https://lkml.org/lkml/2013/3/11/211 . What happened?

By now the SuperH port has been orphaned. So what's the current
procedure for small SuperH fixes like this one?


Paul Bolle

> >  arch/sh/drivers/dma/Kconfig                | 5 ++---
> >  arch/sh/include/cpu-sh4/cpu/dma-register.h | 1 -
> >  arch/sh/include/cpu-sh4a/cpu/dma.h         | 3 +--
> >  3 files changed, 3 insertions(+), 6 deletions(-)
> > 
> > diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
> > index cfd5b90..e07afe8 100644
> > --- a/arch/sh/drivers/dma/Kconfig
> > +++ b/arch/sh/drivers/dma/Kconfig
> > @@ -12,9 +12,8 @@ config SH_DMA_IRQ_MULTI
> >  	default y if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
> >  		     CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
> >  		     CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091  || \
> > -		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7764  || \
> > -		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785  || \
> > -		     CPU_SUBTYPE_SH7760
> > +		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7780  || \
> > +		     CPU_SUBTYPE_SH7785  CPU_SUBTYPE_SH7760
> >  
> >  config SH_DMA_API
> >  	depends on SH_DMA
> > diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
> > index 02788b6..9cd81e5 100644
> > --- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
> > +++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h
> > @@ -32,7 +32,6 @@
> >  #define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
> >  #elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
> >  	defined(CONFIG_CPU_SUBTYPE_SH7763) || \
> > -	defined(CONFIG_CPU_SUBTYPE_SH7764) || \
> >  	defined(CONFIG_CPU_SUBTYPE_SH7780) || \
> >  	defined(CONFIG_CPU_SUBTYPE_SH7785)
> >  #define CHCR_TS_LOW_MASK	0x00000018
> > diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
> > index 89afb65..8ceccce 100644
> > --- a/arch/sh/include/cpu-sh4a/cpu/dma.h
> > +++ b/arch/sh/include/cpu-sh4a/cpu/dma.h
> > @@ -14,8 +14,7 @@
> >  #define DMTE4_IRQ	evt2irq(0xb80)
> >  #define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
> >  #define SH_DMAC_BASE0	0xFE008020
> > -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
> > -	defined(CONFIG_CPU_SUBTYPE_SH7764)
> > +#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
> >  #define DMTE0_IRQ	evt2irq(0x640)
> >  #define DMTE4_IRQ	evt2irq(0x780)
> >  #define DMAE0_IRQ	evt2irq(0x6c0)
> 

Re: [PATCH 21/28] Remove CPU_SUBTYPE_SH7764

[Paul Bolle]

On Sun, 2014-02-09 at 22:36 +0100, Paul Bolle wrote:
> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> > The symbol is an orphan, get rid of it.
> > 
> > Signed-off-by: Richard Weinberger <richard@nod.at>
> 
> Paul Mundt had something similar queued a year ago:
> https://lkml.org/lkml/2013/3/11/211 . What happened?

By now the SuperH port has been orphaned. So what's the current
procedure for small SuperH fixes like this one?


Paul Bolle

> >  arch/sh/drivers/dma/Kconfig                | 5 ++---
> >  arch/sh/include/cpu-sh4/cpu/dma-register.h | 1 -
> >  arch/sh/include/cpu-sh4a/cpu/dma.h         | 3 +--
> >  3 files changed, 3 insertions(+), 6 deletions(-)
> > 
> > diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
> > index cfd5b90..e07afe8 100644
> > --- a/arch/sh/drivers/dma/Kconfig
> > +++ b/arch/sh/drivers/dma/Kconfig
> > @@ -12,9 +12,8 @@ config SH_DMA_IRQ_MULTI
> >  	default y if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
> >  		     CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
> >  		     CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091  || \
> > -		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7764  || \
> > -		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785  || \
> > -		     CPU_SUBTYPE_SH7760
> > +		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7780  || \
> > +		     CPU_SUBTYPE_SH7785  CPU_SUBTYPE_SH7760
> >  
> >  config SH_DMA_API
> >  	depends on SH_DMA
> > diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
> > index 02788b6..9cd81e5 100644
> > --- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
> > +++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h
> > @@ -32,7 +32,6 @@
> >  #define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
> >  #elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
> >  	defined(CONFIG_CPU_SUBTYPE_SH7763) || \
> > -	defined(CONFIG_CPU_SUBTYPE_SH7764) || \
> >  	defined(CONFIG_CPU_SUBTYPE_SH7780) || \
> >  	defined(CONFIG_CPU_SUBTYPE_SH7785)
> >  #define CHCR_TS_LOW_MASK	0x00000018
> > diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
> > index 89afb65..8ceccce 100644
> > --- a/arch/sh/include/cpu-sh4a/cpu/dma.h
> > +++ b/arch/sh/include/cpu-sh4a/cpu/dma.h
> > @@ -14,8 +14,7 @@
> >  #define DMTE4_IRQ	evt2irq(0xb80)
> >  #define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
> >  #define SH_DMAC_BASE0	0xFE008020
> > -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
> > -	defined(CONFIG_CPU_SUBTYPE_SH7764)
> > +#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
> >  #define DMTE0_IRQ	evt2irq(0x640)
> >  #define DMTE4_IRQ	evt2irq(0x780)
> >  #define DMAE0_IRQ	evt2irq(0x6c0)
> 

Re: [PATCH 21/28] Remove CPU_SUBTYPE_SH7764

[Geert Uytterhoeven]

Hi Paul,

On Tue, Apr 15, 2014 at 11:39 AM, Paul Bolle <pebolle@tiscali.nl> wrote:
> On Sun, 2014-02-09 at 22:36 +0100, Paul Bolle wrote:
>> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
>> > The symbol is an orphan, get rid of it.
>> >
>> > Signed-off-by: Richard Weinberger <richard@nod.at>
>>
>> Paul Mundt had something similar queued a year ago:
>> https://lkml.org/lkml/2013/3/11/211 . What happened?
>
> By now the SuperH port has been orphaned. So what's the current
> procedure for small SuperH fixes like this one?

Please submit them to Andrew Morton <akpm@linux-foundation.org>.

Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 21/28] Remove CPU_SUBTYPE_SH7764

[Geert Uytterhoeven]

Hi Paul,

On Tue, Apr 15, 2014 at 11:39 AM, Paul Bolle <pebolle@tiscali.nl> wrote:
> On Sun, 2014-02-09 at 22:36 +0100, Paul Bolle wrote:
>> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
>> > The symbol is an orphan, get rid of it.
>> >
>> > Signed-off-by: Richard Weinberger <richard@nod.at>
>>
>> Paul Mundt had something similar queued a year ago:
>> https://lkml.org/lkml/2013/3/11/211 . What happened?
>
> By now the SuperH port has been orphaned. So what's the current
> procedure for small SuperH fixes like this one?

Please submit them to Andrew Morton <akpm@linux-foundation.org>.

Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH] Remove CPU_SUBTYPE_SH7764

[Paul Bolle]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
[pebolle@tiscali.nl: re-added dropped ||]
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
Submitted by Richard a few months ago as "[PATCH 21/28] Remove
CPU_SUBTYPE_SH7764".

Untested.

 arch/sh/drivers/dma/Kconfig                | 5 ++---
 arch/sh/include/cpu-sh4/cpu/dma-register.h | 1 -
 arch/sh/include/cpu-sh4a/cpu/dma.h         | 3 +--
 3 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index cfd5b90a8628..78bc97b1d027 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -12,9 +12,8 @@ config SH_DMA_IRQ_MULTI
 	default y if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
 		     CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
 		     CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091  || \
-		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7764  || \
-		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785  || \
-		     CPU_SUBTYPE_SH7760
+		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7780  || \
+		     CPU_SUBTYPE_SH7785  || CPU_SUBTYPE_SH7760
 
 config SH_DMA_API
 	depends on SH_DMA
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
index 02788b6a03b7..9cd81e54056a 100644
--- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h
@@ -32,7 +32,6 @@
 #define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-	defined(CONFIG_CPU_SUBTYPE_SH7764) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7780) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define CHCR_TS_LOW_MASK	0x00000018
diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
index 89afb650ce25..8ceccceae844 100644
--- a/arch/sh/include/cpu-sh4a/cpu/dma.h
+++ b/arch/sh/include/cpu-sh4a/cpu/dma.h
@@ -14,8 +14,7 @@
 #define DMTE4_IRQ	evt2irq(0xb80)
 #define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
 #define SH_DMAC_BASE0	0xFE008020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-	defined(CONFIG_CPU_SUBTYPE_SH7764)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 #define DMTE0_IRQ	evt2irq(0x640)
 #define DMTE4_IRQ	evt2irq(0x780)
 #define DMAE0_IRQ	evt2irq(0x6c0)
-- 
1.9.3

[PATCH] Remove CPU_SUBTYPE_SH7764

[Paul Bolle]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
[pebolle@tiscali.nl: re-added dropped ||]
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
Submitted by Richard a few months ago as "[PATCH 21/28] Remove
CPU_SUBTYPE_SH7764".

Untested.

 arch/sh/drivers/dma/Kconfig                | 5 ++---
 arch/sh/include/cpu-sh4/cpu/dma-register.h | 1 -
 arch/sh/include/cpu-sh4a/cpu/dma.h         | 3 +--
 3 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index cfd5b90a8628..78bc97b1d027 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -12,9 +12,8 @@ config SH_DMA_IRQ_MULTI
 	default y if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
 		     CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
 		     CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091  || \
-		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7764  || \
-		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785  || \
-		     CPU_SUBTYPE_SH7760
+		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7780  || \
+		     CPU_SUBTYPE_SH7785  || CPU_SUBTYPE_SH7760
 
 config SH_DMA_API
 	depends on SH_DMA
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
index 02788b6a03b7..9cd81e54056a 100644
--- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h
@@ -32,7 +32,6 @@
 #define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-	defined(CONFIG_CPU_SUBTYPE_SH7764) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7780) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define CHCR_TS_LOW_MASK	0x00000018
diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
index 89afb650ce25..8ceccceae844 100644
--- a/arch/sh/include/cpu-sh4a/cpu/dma.h
+++ b/arch/sh/include/cpu-sh4a/cpu/dma.h
@@ -14,8 +14,7 @@
 #define DMTE4_IRQ	evt2irq(0xb80)
 #define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
 #define SH_DMAC_BASE0	0xFE008020
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-	defined(CONFIG_CPU_SUBTYPE_SH7764)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 #define DMTE0_IRQ	evt2irq(0x640)
 #define DMTE4_IRQ	evt2irq(0x780)
 #define DMAE0_IRQ	evt2irq(0x6c0)
-- 
1.9.3

Re: [PATCH] Remove CPU_SUBTYPE_SH7764

[Paul Bolle]

On Wed, 2014-06-18 at 11:32 +0200, Paul Bolle wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> [pebolle@tiscali.nl: re-added dropped ||]
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> ---
> Submitted by Richard a few months ago as "[PATCH 21/28] Remove
> CPU_SUBTYPE_SH7764".

So I should have sent this with a
    From: Richard Weinberger <richard@nod.at>
 
first line. Let's hope Andrew notices it. 


Paul Bolle

> Untested.
> 
>  arch/sh/drivers/dma/Kconfig                | 5 ++---
>  arch/sh/include/cpu-sh4/cpu/dma-register.h | 1 -
>  arch/sh/include/cpu-sh4a/cpu/dma.h         | 3 +--
>  3 files changed, 3 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
> index cfd5b90a8628..78bc97b1d027 100644
> --- a/arch/sh/drivers/dma/Kconfig
> +++ b/arch/sh/drivers/dma/Kconfig
> @@ -12,9 +12,8 @@ config SH_DMA_IRQ_MULTI
>  	default y if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
>  		     CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
>  		     CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091  || \
> -		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7764  || \
> -		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785  || \
> -		     CPU_SUBTYPE_SH7760
> +		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7780  || \
> +		     CPU_SUBTYPE_SH7785  || CPU_SUBTYPE_SH7760
>  
>  config SH_DMA_API
>  	depends on SH_DMA
> diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
> index 02788b6a03b7..9cd81e54056a 100644
> --- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
> +++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h
> @@ -32,7 +32,6 @@
>  #define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
>  #elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
>  	defined(CONFIG_CPU_SUBTYPE_SH7763) || \
> -	defined(CONFIG_CPU_SUBTYPE_SH7764) || \
>  	defined(CONFIG_CPU_SUBTYPE_SH7780) || \
>  	defined(CONFIG_CPU_SUBTYPE_SH7785)
>  #define CHCR_TS_LOW_MASK	0x00000018
> diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
> index 89afb650ce25..8ceccceae844 100644
> --- a/arch/sh/include/cpu-sh4a/cpu/dma.h
> +++ b/arch/sh/include/cpu-sh4a/cpu/dma.h
> @@ -14,8 +14,7 @@
>  #define DMTE4_IRQ	evt2irq(0xb80)
>  #define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
>  #define SH_DMAC_BASE0	0xFE008020
> -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
> -	defined(CONFIG_CPU_SUBTYPE_SH7764)
> +#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
>  #define DMTE0_IRQ	evt2irq(0x640)
>  #define DMTE4_IRQ	evt2irq(0x780)
>  #define DMAE0_IRQ	evt2irq(0x6c0)

Re: [PATCH] Remove CPU_SUBTYPE_SH7764

[Paul Bolle]

On Wed, 2014-06-18 at 11:32 +0200, Paul Bolle wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> [pebolle@tiscali.nl: re-added dropped ||]
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> ---
> Submitted by Richard a few months ago as "[PATCH 21/28] Remove
> CPU_SUBTYPE_SH7764".

So I should have sent this with a
    From: Richard Weinberger <richard@nod.at>
 
first line. Let's hope Andrew notices it. 


Paul Bolle

> Untested.
> 
>  arch/sh/drivers/dma/Kconfig                | 5 ++---
>  arch/sh/include/cpu-sh4/cpu/dma-register.h | 1 -
>  arch/sh/include/cpu-sh4a/cpu/dma.h         | 3 +--
>  3 files changed, 3 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
> index cfd5b90a8628..78bc97b1d027 100644
> --- a/arch/sh/drivers/dma/Kconfig
> +++ b/arch/sh/drivers/dma/Kconfig
> @@ -12,9 +12,8 @@ config SH_DMA_IRQ_MULTI
>  	default y if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
>  		     CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
>  		     CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091  || \
> -		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7764  || \
> -		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785  || \
> -		     CPU_SUBTYPE_SH7760
> +		     CPU_SUBTYPE_SH7763  || CPU_SUBTYPE_SH7780  || \
> +		     CPU_SUBTYPE_SH7785  || CPU_SUBTYPE_SH7760
>  
>  config SH_DMA_API
>  	depends on SH_DMA
> diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
> index 02788b6a03b7..9cd81e54056a 100644
> --- a/arch/sh/include/cpu-sh4/cpu/dma-register.h
> +++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h
> @@ -32,7 +32,6 @@
>  #define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
>  #elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
>  	defined(CONFIG_CPU_SUBTYPE_SH7763) || \
> -	defined(CONFIG_CPU_SUBTYPE_SH7764) || \
>  	defined(CONFIG_CPU_SUBTYPE_SH7780) || \
>  	defined(CONFIG_CPU_SUBTYPE_SH7785)
>  #define CHCR_TS_LOW_MASK	0x00000018
> diff --git a/arch/sh/include/cpu-sh4a/cpu/dma.h b/arch/sh/include/cpu-sh4a/cpu/dma.h
> index 89afb650ce25..8ceccceae844 100644
> --- a/arch/sh/include/cpu-sh4a/cpu/dma.h
> +++ b/arch/sh/include/cpu-sh4a/cpu/dma.h
> @@ -14,8 +14,7 @@
>  #define DMTE4_IRQ	evt2irq(0xb80)
>  #define DMAE0_IRQ	evt2irq(0xbc0)	/* DMA Error IRQ*/
>  #define SH_DMAC_BASE0	0xFE008020
> -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
> -	defined(CONFIG_CPU_SUBTYPE_SH7764)
> +#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
>  #define DMTE0_IRQ	evt2irq(0x640)
>  #define DMTE4_IRQ	evt2irq(0x780)
>  #define DMAE0_IRQ	evt2irq(0x6c0)

[PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-s3c24xx/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 1c67f04..bb1fa603 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -561,7 +561,6 @@ config MACH_OSIRIS
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
-	select S3C24XX_GPIO_EXTRA128
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
-- 
1.8.4.2

[PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-s3c24xx/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 1c67f04..bb1fa603 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -561,7 +561,6 @@ config MACH_OSIRIS
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
-	select S3C24XX_GPIO_EXTRA128
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
-- 
1.8.4.2

[PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-s3c24xx/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 1c67f04..bb1fa603 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -561,7 +561,6 @@ config MACH_OSIRIS
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
-	select S3C24XX_GPIO_EXTRA128
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
-- 
1.8.4.2

Re: [PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128

[Kukjin Kim]

On 02/10/14 03:48, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
>
> Signed-off-by: Richard Weinberger<richard@nod.at>
> ---
>   arch/arm/mach-s3c24xx/Kconfig | 1 -
>   1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index 1c67f04..bb1fa603 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -561,7 +561,6 @@ config MACH_OSIRIS
>   	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
>   	select S3C2440_XTAL_12000000
>   	select S3C24XX_DCLK
> -	select S3C24XX_GPIO_EXTRA128
>   	select S3C24XX_SIMTEC_PM if PM
>   	select S3C_DEV_NAND
>   	select S3C_DEV_USB_HOST

OK good, but I will squash this with 13th for mach-s3c24xx/Kconfig when 
I apply.

Thanks,
Kukjin

[PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128

[Kukjin Kim]

On 02/10/14 03:48, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
>
> Signed-off-by: Richard Weinberger<richard@nod.at>
> ---
>   arch/arm/mach-s3c24xx/Kconfig | 1 -
>   1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index 1c67f04..bb1fa603 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -561,7 +561,6 @@ config MACH_OSIRIS
>   	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
>   	select S3C2440_XTAL_12000000
>   	select S3C24XX_DCLK
> -	select S3C24XX_GPIO_EXTRA128
>   	select S3C24XX_SIMTEC_PM if PM
>   	select S3C_DEV_NAND
>   	select S3C_DEV_USB_HOST

OK good, but I will squash this with 13th for mach-s3c24xx/Kconfig when 
I apply.

Thanks,
Kukjin

Re: [PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128

[Kukjin Kim]

On 02/10/14 03:48, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
>
> Signed-off-by: Richard Weinberger<richard@nod.at>
> ---
>   arch/arm/mach-s3c24xx/Kconfig | 1 -
>   1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index 1c67f04..bb1fa603 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -561,7 +561,6 @@ config MACH_OSIRIS
>   	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
>   	select S3C2440_XTAL_12000000
>   	select S3C24XX_DCLK
> -	select S3C24XX_GPIO_EXTRA128
>   	select S3C24XX_SIMTEC_PM if PM
>   	select S3C_DEV_NAND
>   	select S3C_DEV_USB_HOST

OK good, but I will squash this with 13th for mach-s3c24xx/Kconfig when 
I apply.

Thanks,
Kukjin

Re: [PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128

[Kukjin Kim]

On 02/11/14 12:31, Kukjin Kim wrote:
> On 02/10/14 03:48, Richard Weinberger wrote:
>> The symbol is an orphan, get rid of it.
>>
>> Signed-off-by: Richard Weinberger<richard@nod.at>
>> ---
>> arch/arm/mach-s3c24xx/Kconfig | 1 -
>> 1 file changed, 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-s3c24xx/Kconfig
>> b/arch/arm/mach-s3c24xx/Kconfig
>> index 1c67f04..bb1fa603 100644
>> --- a/arch/arm/mach-s3c24xx/Kconfig
>> +++ b/arch/arm/mach-s3c24xx/Kconfig
>> @@ -561,7 +561,6 @@ config MACH_OSIRIS
>> select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
>> select S3C2440_XTAL_12000000
>> select S3C24XX_DCLK
>> - select S3C24XX_GPIO_EXTRA128
>> select S3C24XX_SIMTEC_PM if PM
>> select S3C_DEV_NAND
>> select S3C_DEV_USB_HOST
>
> OK good, but I will squash this with 13th for mach-s3c24xx/Kconfig when
> I apply.
>
+ Paul Bolle

Richard,

I found same patch ([PATCH] ARM: s3c24xx: get rid of unneeded selects) 
for S3C24XX from Paul before your posting. So I picked that up.

Thanks,
Kukjin

[PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128

[Kukjin Kim]

On 02/11/14 12:31, Kukjin Kim wrote:
> On 02/10/14 03:48, Richard Weinberger wrote:
>> The symbol is an orphan, get rid of it.
>>
>> Signed-off-by: Richard Weinberger<richard@nod.at>
>> ---
>> arch/arm/mach-s3c24xx/Kconfig | 1 -
>> 1 file changed, 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-s3c24xx/Kconfig
>> b/arch/arm/mach-s3c24xx/Kconfig
>> index 1c67f04..bb1fa603 100644
>> --- a/arch/arm/mach-s3c24xx/Kconfig
>> +++ b/arch/arm/mach-s3c24xx/Kconfig
>> @@ -561,7 +561,6 @@ config MACH_OSIRIS
>> select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
>> select S3C2440_XTAL_12000000
>> select S3C24XX_DCLK
>> - select S3C24XX_GPIO_EXTRA128
>> select S3C24XX_SIMTEC_PM if PM
>> select S3C_DEV_NAND
>> select S3C_DEV_USB_HOST
>
> OK good, but I will squash this with 13th for mach-s3c24xx/Kconfig when
> I apply.
>
+ Paul Bolle

Richard,

I found same patch ([PATCH] ARM: s3c24xx: get rid of unneeded selects) 
for S3C24XX from Paul before your posting. So I picked that up.

Thanks,
Kukjin

Re: [PATCH 22/28] Remove S3C24XX_GPIO_EXTRA128

[Kukjin Kim]

On 02/11/14 12:31, Kukjin Kim wrote:
> On 02/10/14 03:48, Richard Weinberger wrote:
>> The symbol is an orphan, get rid of it.
>>
>> Signed-off-by: Richard Weinberger<richard@nod.at>
>> ---
>> arch/arm/mach-s3c24xx/Kconfig | 1 -
>> 1 file changed, 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-s3c24xx/Kconfig
>> b/arch/arm/mach-s3c24xx/Kconfig
>> index 1c67f04..bb1fa603 100644
>> --- a/arch/arm/mach-s3c24xx/Kconfig
>> +++ b/arch/arm/mach-s3c24xx/Kconfig
>> @@ -561,7 +561,6 @@ config MACH_OSIRIS
>> select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
>> select S3C2440_XTAL_12000000
>> select S3C24XX_DCLK
>> - select S3C24XX_GPIO_EXTRA128
>> select S3C24XX_SIMTEC_PM if PM
>> select S3C_DEV_NAND
>> select S3C_DEV_USB_HOST
>
> OK good, but I will squash this with 13th for mach-s3c24xx/Kconfig when
> I apply.
>
+ Paul Bolle

Richard,

I found same patch ([PATCH] ARM: s3c24xx: get rid of unneeded selects) 
for S3C24XX from Paul before your posting. So I picked that up.

Thanks,
Kukjin

[PATCH 23/28] Remove MACH_OMAP_H4_OTG

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 drivers/usb/gadget/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 8154165..42f017a 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -226,7 +226,7 @@ config USB_GR_UDC
 config USB_OMAP
 	tristate "OMAP USB Device Controller"
 	depends on ARCH_OMAP1
-	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
+	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
 	help
 	   Many Texas Instruments OMAP processors have flexible full
 	   speed USB device controllers, with support for up to 30
-- 
1.8.4.2

Re: [PATCH 23/28] Remove MACH_OMAP_H4_OTG

[Aaro Koskinen]

On Sun, Feb 09, 2014 at 07:48:01PM +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>

A.

[PATCH 24/28] Remove DEPRECATED

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/mn10300/Kconfig.debug | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug
index 94efb3e..af18047 100644
--- a/arch/mn10300/Kconfig.debug
+++ b/arch/mn10300/Kconfig.debug
@@ -32,7 +32,7 @@ config KPROBES
 
 config GDBSTUB
 	bool "Remote GDB kernel debugging"
-	depends on DEBUG_KERNEL && DEPRECATED
+	depends on DEBUG_KERNEL
 	select DEBUG_INFO
 	select FRAME_POINTER
 	help
-- 
1.8.4.2

Re: [PATCH 24/28] Remove DEPRECATED

[Paul Bolle]

On Sun, 2014-02-09 at 19:48 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>
> ---
>  arch/mn10300/Kconfig.debug | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug
> index 94efb3e..af18047 100644
> --- a/arch/mn10300/Kconfig.debug
> +++ b/arch/mn10300/Kconfig.debug
> @@ -32,7 +32,7 @@ config KPROBES
>  
>  config GDBSTUB
>  	bool "Remote GDB kernel debugging"
> -	depends on DEBUG_KERNEL && DEPRECATED
> +	depends on DEBUG_KERNEL

But now you've enabled a lot of stuff that, as far as I can tell, could
not have been built since v2.6.39.

The proper fix would be to remove GDBSTUB and everything that depends on
it. I tried to do that once and it turned out to be much more work than
I expected. So perhaps we should just do s/DEPRECATED/BROKEN/ and let
the mn10300 maintainers deal with this.
 
>  	select DEBUG_INFO
>  	select FRAME_POINTER
>  	help


Paul Bolle

Re: [PATCH 24/28] Remove DEPRECATED

[Richard Weinberger]

Am 09.02.2014 20:38, schrieb Paul Bolle:
> On Sun, 2014-02-09 at 19:48 +0100, Richard Weinberger wrote:
>> The symbol is an orphan, get rid of it.
>>
>> Signed-off-by: Richard Weinberger <richard@nod.at>
>> ---
>>  arch/mn10300/Kconfig.debug | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug
>> index 94efb3e..af18047 100644
>> --- a/arch/mn10300/Kconfig.debug
>> +++ b/arch/mn10300/Kconfig.debug
>> @@ -32,7 +32,7 @@ config KPROBES
>>  
>>  config GDBSTUB
>>  	bool "Remote GDB kernel debugging"
>> -	depends on DEBUG_KERNEL && DEPRECATED
>> +	depends on DEBUG_KERNEL
> 
> But now you've enabled a lot of stuff that, as far as I can tell, could
> not have been built since v2.6.39.

This is by design. If the code does not build/work it needs to be fixed or removed.

Thanks,
//richard

Re: [PATCH 24/28] Remove DEPRECATED

[Paul Bolle]

On Sun, 2014-02-09 at 21:04 +0100, Richard Weinberger wrote:
> Am 09.02.2014 20:38, schrieb Paul Bolle:
> > But now you've enabled a lot of stuff that, as far as I can tell, could
> > not have been built since v2.6.39.
> 
> This is by design. If the code does not build/work it needs to be fixed or removed.

If that was the design goal of this patch (and similar patches you've
sent) it would have been proper to at least say a few words along those
lines in the commit explanation.


Paul Bolle

Re: [PATCH 24/28] Remove DEPRECATED

[Richard Weinberger]

Am 09.02.2014 21:15, schrieb Paul Bolle:
> On Sun, 2014-02-09 at 21:04 +0100, Richard Weinberger wrote:
>> Am 09.02.2014 20:38, schrieb Paul Bolle:
>>> But now you've enabled a lot of stuff that, as far as I can tell, could
>>> not have been built since v2.6.39.
>>
>> This is by design. If the code does not build/work it needs to be fixed or removed.
> 
> If that was the design goal of this patch (and similar patches you've
> sent) it would have been proper to at least say a few words along those
> lines in the commit explanation.

I assumed that every kernel developer is aware of that fact that unreachable/dead code
should be removed.

That said, feel free to use my patch series as base for your work.
The series is only a by-product of some "real" work.

Thanks,
//richard

Re: [PATCH 24/28] Remove DEPRECATED

[Geert Uytterhoeven]

On Sun, Feb 9, 2014 at 9:21 PM, Richard Weinberger <richard@nod.at> wrote:
> Am 09.02.2014 21:15, schrieb Paul Bolle:
>> On Sun, 2014-02-09 at 21:04 +0100, Richard Weinberger wrote:
>>> Am 09.02.2014 20:38, schrieb Paul Bolle:
>>>> But now you've enabled a lot of stuff that, as far as I can tell, could
>>>> not have been built since v2.6.39.
>>>
>>> This is by design. If the code does not build/work it needs to be fixed or removed.
>>
>> If that was the design goal of this patch (and similar patches you've
>> sent) it would have been proper to at least say a few words along those
>> lines in the commit explanation.
>
> I assumed that every kernel developer is aware of that fact that unreachable/dead code
> should be removed.

Yes, it should be removed.

But that's not what you did. You did the Kconfig-equivalent of removing a
"#if 0" in a C source file, which causes havoc.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 24/28] Remove DEPRECATED

[Richard Weinberger]

Am 10.02.2014 09:49, schrieb Geert Uytterhoeven:
> On Sun, Feb 9, 2014 at 9:21 PM, Richard Weinberger <richard@nod.at> wrote:
>> Am 09.02.2014 21:15, schrieb Paul Bolle:
>>> On Sun, 2014-02-09 at 21:04 +0100, Richard Weinberger wrote:
>>>> Am 09.02.2014 20:38, schrieb Paul Bolle:
>>>>> But now you've enabled a lot of stuff that, as far as I can tell, could
>>>>> not have been built since v2.6.39.
>>>>
>>>> This is by design. If the code does not build/work it needs to be fixed or removed.
>>>
>>> If that was the design goal of this patch (and similar patches you've
>>> sent) it would have been proper to at least say a few words along those
>>> lines in the commit explanation.
>>
>> I assumed that every kernel developer is aware of that fact that unreachable/dead code
>> should be removed.
> 
> Yes, it should be removed.
> 
> But that's not what you did. You did the Kconfig-equivalent of removing a
> "#if 0" in a C source file, which causes havoc.

Fair point. I'll remove that code in v2.
Hopefully I can catch all breakage on my testbed as many archs/configs are involved.

Thanks,
//richard

Re: [PATCH 24/28] Remove DEPRECATED

[Paul Bolle]

David, Koichi,

On Mon, 2014-02-10 at 09:52 +0100, Richard Weinberger wrote:
> Am 10.02.2014 09:49, schrieb Geert Uytterhoeven:
> > On Sun, Feb 9, 2014 at 9:21 PM, Richard Weinberger <richard@nod.at> wrote:
> >> I assumed that every kernel developer is aware of that fact that unreachable/dead code
> >> should be removed.
> > 
> > Yes, it should be removed.
> > 
> > But that's not what you did. You did the Kconfig-equivalent of removing a
> > "#if 0" in a C source file, which causes havoc.
> 
> Fair point. I'll remove that code in v2.
> Hopefully I can catch all breakage on my testbed as many archs/configs are involved.

After first reporting this issue, in 2011, I tried to remove all dead
code hiding behind config GDBSTUB. I still have the results of that
attempt stashed away:
    $ git stash show stash@{12}
     arch/mn10300/Kconfig.debug                      |  122 +-----
     arch/mn10300/boot/compressed/misc.c             |    9 -
     arch/mn10300/include/asm/exceptions.h           |    7 -
     arch/mn10300/include/asm/gdb-stub.h             |  182 ---------
     arch/mn10300/kernel/Makefile                    |    3 -
     arch/mn10300/kernel/entry.S                     |   21 --
     arch/mn10300/kernel/gdb-io-serial-low.S         |   91 -----
     arch/mn10300/kernel/gdb-io-serial.c             |  174 ---------
     arch/mn10300/kernel/gdb-io-ttysm-low.S          |   93 -----
     arch/mn10300/kernel/gdb-io-ttysm.c              |  303 ---------------
     arch/mn10300/kernel/gdb-low.S                   |  115 ------
     arch/mn10300/kernel/gdb-stub.c                  | 1923 ---------------------------------------------------------------------------------------------
     arch/mn10300/kernel/head.S                      |   10 -
     arch/mn10300/kernel/mn10300-serial.c            |    9 -
     arch/mn10300/kernel/mn10300-serial.h            |   14 -
     arch/mn10300/kernel/mn10300-watchdog.c          |   14 +-
     arch/mn10300/kernel/process.c                   |    1 -
     arch/mn10300/kernel/smp-low.S                   |    4 -
     arch/mn10300/kernel/smp.c                       |    7 -
     arch/mn10300/mm/fault.c                         |    9 -
     arch/mn10300/mm/misalignment.c                  |    1 -
     arch/mn10300/mm/tlb-mn10300.S                   |   13 -
     arch/mn10300/unit-asb2303/include/unit/serial.h |   83 ----
     arch/mn10300/unit-asb2305/include/unit/serial.h |   76 ----
     arch/mn10300/unit-asb2305/unit-init.c           |    2 -
     arch/mn10300/unit-asb2364/include/unit/serial.h |   64 ----
     26 files changed, 2 insertions(+), 3348 deletions(-)

By then I admitted defeat.

I might be willing to revisit this and draft a series of patches to
clean that up properly. But I think I never got any reaction on
Richard's patch or my report. And I do prefer to know beforehand what
your plans are for config GDBSTUB.


Paul Bolle

Re: [PATCH 24/28] Remove DEPRECATED

[Guenter Roeck]

On 02/09/2014 12:04 PM, Richard Weinberger wrote:
> Am 09.02.2014 20:38, schrieb Paul Bolle:
>> On Sun, 2014-02-09 at 19:48 +0100, Richard Weinberger wrote:
>>> The symbol is an orphan, get rid of it.
>>>
>>> Signed-off-by: Richard Weinberger <richard@nod.at>
>>> ---
>>>   arch/mn10300/Kconfig.debug | 2 +-
>>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug
>>> index 94efb3e..af18047 100644
>>> --- a/arch/mn10300/Kconfig.debug
>>> +++ b/arch/mn10300/Kconfig.debug
>>> @@ -32,7 +32,7 @@ config KPROBES
>>>
>>>   config GDBSTUB
>>>   	bool "Remote GDB kernel debugging"
>>> -	depends on DEBUG_KERNEL && DEPRECATED
>>> +	depends on DEBUG_KERNEL
>>
>> But now you've enabled a lot of stuff that, as far as I can tell, could
>> not have been built since v2.6.39.
>
> This is by design. If the code does not build/work it needs to be fixed or removed.
>

I could understand if you would replace DEPRECATED with BROKEN,
but causing a potentially large number of broken builds and
then leave it to others to clean up the resulting mess doesn't
make any sense to me and should, in my opinion, be rejected.

Guenter

Re: [PATCH 24/28] Remove DEPRECATED

[Richard Weinberger]

Am 09.02.2014 22:35, schrieb Guenter Roeck:
> I could understand if you would replace DEPRECATED with BROKEN,
> but causing a potentially large number of broken builds and
> then leave it to others to clean up the resulting mess doesn't
> make any sense to me and should, in my opinion, be rejected.

Currently the mess is hidden by bad Kconfig dependencies.
We have to face it. :)

Of course, if the maintainer wants me or Paul to remove the resulting
mess to I'm fine with that...

Thanks,
//richard

Re: [PATCH 24/28] Remove DEPRECATED

[Gene Heskett]

On Sunday 09 February 2014, Richard Weinberger wrote:
>Am 09.02.2014 22:35, schrieb Guenter Roeck:
>> I could understand if you would replace DEPRECATED with BROKEN,
>> but causing a potentially large number of broken builds and
>> then leave it to others to clean up the resulting mess doesn't
>> make any sense to me and should, in my opinion, be rejected.
>
>Currently the mess is hidden by bad Kconfig dependencies.
>We have to face it. :)

And much of it is in a bad make oldconfig that I can't date, but all of the 
multimedia stuff has been stripped and I can no longer use my pcHDTV3000 
card as just one for instance.  I just tested it, using an oldconfig that 
contained several hundred bits and pieces under the ATSC & DVB headers,  
after the oldconfig was done, all that was stripped from the new one, every 
trace of it.  That was working code guys, what the hell?  Kconfig could 
have problems, but the oldconfig output being stripped is a much larger 
one.  First problems first.  Then you can really see how fubared kconfig 
is.

>Of course, if the maintainer wants me or Paul to remove the resulting
>mess to I'm fine with that...
>
>Thanks,
>//richard
>--
>To unsubscribe from this list: send the line "unsubscribe linux-kernel"
>in the body of a message to majordomo@vger.kernel.org
>More majordomo info at  http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at  http://www.tux.org/lkml/


Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

NOTICE: Will pay 100 USD for an HP-4815A defective but
complete probe assembly.

Re: [PATCH 24/28] Remove DEPRECATED

[Paul Bolle]

On Sun, 2014-02-09 at 16:54 -0500, Gene Heskett wrote:
> And much of it is in a bad make oldconfig that I can't date, but all of the 
> multimedia stuff has been stripped and I can no longer use my pcHDTV3000 
> card as just one for instance.  I just tested it, using an oldconfig that 
> contained several hundred bits and pieces under the ATSC & DVB headers,  
> after the oldconfig was done, all that was stripped from the new one, every 
> trace of it.  That was working code guys, what the hell?  Kconfig could 
> have problems, but the oldconfig output being stripped is a much larger 
> one.  First problems first.  Then you can really see how fubared kconfig 
> is.

What has this got to do with an invalid Kconfig dependency in
arch/mn10300?


Paul Bolle

Re: [PATCH 24/28] Remove DEPRECATED

[Gene Heskett]

On Sunday 09 February 2014, Paul Bolle wrote:
>On Sun, 2014-02-09 at 16:54 -0500, Gene Heskett wrote:
>> And much of it is in a bad make oldconfig that I can't date, but all of
>> the multimedia stuff has been stripped and I can no longer use my
>> pcHDTV3000 card as just one for instance.  I just tested it, using an
>> oldconfig that contained several hundred bits and pieces under the
>> ATSC & DVB headers, after the oldconfig was done, all that was
>> stripped from the new one, every trace of it.  That was working code
>> guys, what the hell?  Kconfig could have problems, but the oldconfig
>> output being stripped is a much larger one.  First problems first. 
>> Then you can really see how fubared kconfig is.
>
>What has this got to do with an invalid Kconfig dependency in
>arch/mn10300?
>
>
>Paul Bolle

Probably not much Paul,I was trying to point out a much bigger problem for 
many of us at least on the x86 machinery, who seem to have accepted that 
support of their machinery has now apparently been deprecated, by something 
in the make oldconfig region.  The arch/mn10300 problem is completely lost 
in the noise of this breakage to the x86 people.  And I dare say there are 
more of us by a factor of at least 100.

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

NOTICE: Will pay 100 USD for an HP-4815A defective but
complete probe assembly.

Re: [PATCH 24/28] Remove DEPRECATED

[Paul Bolle]

On Sun, 2014-02-09 at 17:41 -0500, Gene Heskett wrote:
> On Sunday 09 February 2014, Paul Bolle wrote:
> >What has this got to do with an invalid Kconfig dependency in
> >arch/mn10300?
>
> Probably not much 
Feel free to open a new thread, with the relevant details, and involve
the relevant people and lists. I have no idea what you're going on about
and could not care less (in the context of this thread).


Paul Bolle

Re: [PATCH 24/28] Remove DEPRECATED

[Gene Heskett]

On Sunday 09 February 2014, Paul Bolle wrote:
>On Sun, 2014-02-09 at 17:41 -0500, Gene Heskett wrote:
>> On Sunday 09 February 2014, Paul Bolle wrote:
>> >What has this got to do with an invalid Kconfig dependency in
>> >arch/mn10300?
>> 
>> Probably not much
>
>Feel free to open a new thread, with the relevant details, and involve
>the relevant people and lists. I have no idea what you're going on about
>and could not care less (in the context of this thread).
>
>
>Paul Bolle

Been tried, got zero response.  Frankly, posting just to lkml, hoping the 
revalent people see it, is beginning to act like posting to a black hole.

Somewhere between 3.4.36 and 3.8.2, 99% of it disappeared from an oldconfig 
output.  I don't have any trees between those two on my machine or I'd pin 
it down a little more specifically.

So who would the correct maintainer person be, for such as a "make 
oldconfig"?

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

NOTICE: Will pay 100 USD for an HP-4815A defective but
complete probe assembly.

Re: [PATCH 24/28] Remove DEPRECATED

[Ken Moffat]

On Sun, Feb 09, 2014 at 06:05:41PM -0500, Gene Heskett wrote:
> On Sunday 09 February 2014, Paul Bolle wrote:
> >
> >Feel free to open a new thread, with the relevant details, and involve
> >the relevant people and lists. I have no idea what you're going on about
> >and could not care less (in the context of this thread).
> >
> >
> >Paul Bolle
> 
> Been tried, got zero response.  Frankly, posting just to lkml, hoping the 
> revalent people see it, is beginning to act like posting to a black hole.
> 
 I saw one response to you, from Randy Dunlap, asking for more
information : https://lkml.org/lkml/2014/2/8/153

 After your posts a few days ago, I'm tempted to suggest you check
your spam filters, and also any mail files your virus scanner might
have quarantined.  But it is also possible that you just haven't
received it - email is like that.

ĸen
-- 
das eine Mal als Tragödie, dieses Mal als Farce

Re: [PATCH 24/28] Remove DEPRECATED

[Randy Dunlap]

On 02/09/2014 07:07 PM, Ken Moffat wrote:
> On Sun, Feb 09, 2014 at 06:05:41PM -0500, Gene Heskett wrote:
>> On Sunday 09 February 2014, Paul Bolle wrote:
>>>
>>> Feel free to open a new thread, with the relevant details, and involve
>>> the relevant people and lists. I have no idea what you're going on about
>>> and could not care less (in the context of this thread).
>>>
>>>
>>> Paul Bolle
>>
>> Been tried, got zero response.  Frankly, posting just to lkml, hoping the 
>> revalent people see it, is beginning to act like posting to a black hole.
>>
>  I saw one response to you, from Randy Dunlap, asking for more
> information : https://lkml.org/lkml/2014/2/8/153

wow, I don't know how I saw this message (thanks, Ken),
but replying to this patch was NOT the right thing to do, Gene.

Just reply to my request and I'll be glad to look into it.

>  After your posts a few days ago, I'm tempted to suggest you check
> your spam filters, and also any mail files your virus scanner might
> have quarantined.  But it is also possible that you just haven't
> received it - email is like that.
> 
> ĸen


-- 
~Randy

Re: [PATCH 24/28] Remove DEPRECATED

[Gene Heskett]

[-- Attachment #1: Type: Text/Plain, Size: 2292 bytes --]

On Sunday 09 February 2014, Randy Dunlap wrote:
>On 02/09/2014 07:07 PM, Ken Moffat wrote:
>> On Sun, Feb 09, 2014 at 06:05:41PM -0500, Gene Heskett wrote:
>>> On Sunday 09 February 2014, Paul Bolle wrote:
>>>> Feel free to open a new thread, with the relevant details, and
>>>> involve the relevant people and lists. I have no idea what you're
>>>> going on about and could not care less (in the context of this
>>>> thread).
>>>> 
>>>> 
>>>> Paul Bolle
>>> 
>>> Been tried, got zero response.  Frankly, posting just to lkml, hoping
>>> the revalent people see it, is beginning to act like posting to a
>>> black hole.
>>> 
>>  I saw one response to you, from Randy Dunlap, asking for more
>> 
>> information : https://lkml.org/lkml/2014/2/8/153
>
>wow, I don't know how I saw this message (thanks, Ken),
>but replying to this patch was NOT the right thing to do, Gene.
>
>Just reply to my request and I'll be glad to look into it.
>
>>  After your posts a few days ago, I'm tempted to suggest you check
>> 
>> your spam filters, and also any mail files your virus scanner might
>> have quarantined.  But it is also possible that you just haven't
>> received it - email is like that.
>> 
>> ؤ¸en

Spam and viri filters watched carefully.  I also use mailfilter, and watch 
its logs full time for FP's.

And I didn't reply because the question seemed way too broad, almost as if 
my lament wasn't read.  That and the mail server doesn't like big 
attachments. So rather than reply to the list, I'll excise some of the 
addresses that bounce from a reply_all or don't like me, and send the 
.config from a 3.019 build which seems ok, but by the time that config is 
run thru a make oldconfig at 3.8.2, most all the media, ATSC and DVB stuff 
is gone.  So I'll attach that one too.  The later file grew 22kb, but 
wholesale parts of the first one are missing from the 2nd.

I've look at Makefile, but most Makefiles are swahili to me so I could be 
looking at it and not recognizing it.

Thank you all.

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

NOTICE: Will pay 100 USD for an HP-4815A defective but
complete probe assembly.


[-- Attachment #2: .config --]
[-- Type: text/x-mpsub, Size: 92395 bytes --]

#
# Automatically generated make config: don't edit
# Linux/i386 3.0.19 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="coyote.coyote.den"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_SPARSE_IRQ is not set

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=5
CONFIG_RCU_BOOST_DELAY=100
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
# CONFIG_LGUEST_GUEST is not set
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
# CONFIG_CPU_SUP_CYRIX_32 is not set
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
# CONFIG_CPU_SUP_UMC_32 is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_IOMMU_API=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=m
CONFIG_ACPI_CUSTOM_METHOD=m
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_DMAR=y
# CONFIG_DMAR_DEFAULT_ON is not set
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
CONFIG_NF_CONNTRACK_SANE=m
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=m
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_FILTER is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m

#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=m
# CONFIG_L2TP_DEBUGFS is not set
# CONFIG_L2TP_V3 is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=m
CONFIG_IEEE802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_WILINK=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_OSD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
# CONFIG_IWMC3200TOP is not set

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_ENCLOSURE is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
# CONFIG_FCOE is not set
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_LOOPBACK_TARGET is not set
# CONFIG_TCM_FC is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_MII=m
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_KS8851_MLL is not set
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
CONFIG_ATL2=m
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
# CONFIG_MAC80211_HWSIM is not set
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
CONFIG_ATH9K_RATE_CONTROL=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
# CONFIG_CARL9170 is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
# CONFIG_IPW2200 is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
# CONFIG_IWLAGN is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWM is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
# CONFIG_RTL8192CU is not set
CONFIG_RTLWIFI=m
CONFIG_RTL8192C_COMMON=m
# CONFIG_WL1251 is not set
# CONFIG_WL12XX_MENU is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
# CONFIG_USB_NET_KALMIA is not set
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
# CONFIG_USB_VL600 is not set
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300TOO=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
# CONFIG_DSCC4_PCI_RST is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
# CONFIG_ATM_DRIVERS is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKEHARD is not set

#
# CAIF transport drivers
#
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_VMXNET3=m
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1680
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
CONFIG_KEYBOARD_GPIO_POLLED=m
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
CONFIG_TOUCHSCREEN_CY8CTMG110=m
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF8574=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
CONFIG_ISI=m
CONFIG_N_HDLC=m
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_BASIC_MMIO_CORE=m
CONFIG_GPIO_BASIC_MMIO=m
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=m
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=m
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
# CONFIG_MFD_SUPPORT is not set
CONFIG_MFD_CORE=m
CONFIG_LPC_SCH=m
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
# CONFIG_RC_CORE is not set
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#

#
# Video and audio decoders
#

#
# MPEG video encoders
#

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Video improvement chips
#

#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BWQCAM is not set
CONFIG_VIDEO_CQCAM=m
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_SAA7164 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_VIA_CAMERA is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
# CONFIG_USB_GSPCA_NW80X is not set
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
# CONFIG_USB_GSPCA_VICAM is not set
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported SDMC DM1105 Adapters
#

#
# Supported FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set

#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set

#
# Supported Mantis Adapters
#

#
# Supported nGene Adapters
#
# CONFIG_DVB_NGENE is not set

#
# Supported DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
# CONFIG_DVB_STB6100 is not set
# CONFIG_DVB_STV090x is not set
# CONFIG_DVB_STV6110x is not set

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_ZL10036 is not set
# CONFIG_DVB_ZL10039 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_STV6110 is not set
# CONFIG_DVB_STV0900 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_SI21XX is not set
# CONFIG_DVB_DS3000 is not set
# CONFIG_DVB_MB86A16 is not set

#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
# CONFIG_DVB_S5H1432 is not set
# CONFIG_DVB_DRXD is not set
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
# CONFIG_DVB_DIB9000 is not set
CONFIG_DVB_TDA10048=m
# CONFIG_DVB_AF9013 is not set
# CONFIG_DVB_EC100 is not set
# CONFIG_DVB_STV0367 is not set
# CONFIG_DVB_CXD2820R is not set

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_LGDT3305 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
# CONFIG_DVB_DIB8000 is not set
# CONFIG_DVB_MB86A20S is not set

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
# CONFIG_DVB_TUNER_DIB0070 is not set
# CONFIG_DVB_TUNER_DIB0090 is not set

#
# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_ISL6423 is not set
# CONFIG_DVB_LGS8GL5 is not set
# CONFIG_DVB_LGS8GXX is not set
# CONFIG_DVB_ATBM8830 is not set
# CONFIG_DVB_TDA665x is not set
# CONFIG_DVB_IX2505V is not set

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=m
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_NVIDIA=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=m
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
CONFIG_FB_HGA=m
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
# CONFIG_FB_MATROX_MAVEN is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=m
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_UDL=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_ADP8860=m
# CONFIG_BACKLIGHT_ADP8870 is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
# CONFIG_SND_USB_CAIAQ_INPUT is not set
CONFIG_SND_USB_US122L=m
# CONFIG_SND_USB_6FIRE is not set
CONFIG_SND_FIREWIRE=y
# CONFIG_SND_FIREWIRE_SPEAKERS is not set
# CONFIG_SND_ISIGHT is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
CONFIG_HID_KEYTOUCH=m
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=m
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_ROCCAT_COMMON=m
# CONFIG_HID_ROCCAT_ARVO is not set
CONFIG_HID_ROCCAT_KONE=m
CONFIG_HID_ROCCAT_KONEPLUS=m
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
CONFIG_HID_ROCCAT_PYRA=m
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m

#
# Enable Host or Gadget support to see Inventra options
#

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=m
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_GARMIN=m
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
CONFIG_STAGING=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_COMPUTONE is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_BRCMUTIL is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTL8192E is not set
# CONFIG_R8712U is not set
# CONFIG_RTS_PSTOR is not set
# CONFIG_TRANZPORT is not set
# CONFIG_POHMELFS is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_NOUVEAU_DEBUG is not set

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_HYPERV is not set
# CONFIG_VME_BUS is not set
# CONFIG_DX_SEP is not set
# CONFIG_IIO is not set
# CONFIG_CS5535_GPIO is not set
CONFIG_XVMALLOC=y
CONFIG_ZRAM=m
# CONFIG_ZRAM_DEBUG is not set
# CONFIG_ZCACHE is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_CXT1E1 is not set
# CONFIG_FB_XGI is not set
# CONFIG_EASYCAP is not set
# CONFIG_SOLO6X10 is not set
# CONFIG_ACPI_QUICKSTART is not set
CONFIG_MACH_NO_WESTBRIDGE=y
# CONFIG_SBE_2T3E3 is not set
# CONFIG_ATH6K_LEGACY is not set
CONFIG_USB_ENESTORAGE=m
# CONFIG_BCM_WIMAX is not set
CONFIG_FT1000=m
CONFIG_FT1000_USB=m

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_DRM_PSB is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=m
# CONFIG_INTEL_OAKTRAIL is not set
CONFIG_CLKSRC_I8253=y

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_SIGMA is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
CONFIG_BFS_FS=m
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=m
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
CONFIG_NFSD=m
CONFIG_NFSD_DEPRECATED=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_CEPH_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_ACL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
# CONFIG_LKDTM is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_INTEL_TXT is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
CONFIG_VHOST_NET=m
# CONFIG_LGUEST is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y

[-- Attachment #3: .config --]
[-- Type: text/x-mpsub, Size: 115177 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.8.2 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_HAVE_UID16=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_GENERIC_SIGALTSTACK=y
CONFIG_CLONE_BACKWARDS=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_DEV_THROTTLING=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
# CONFIG_CPU_SUP_CYRIX_32 is not set
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
# CONFIG_MICROCODE_INTEL is not set
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
# CONFIG_X86_PAT is not set
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_I2C=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=m
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_APEI=y
# CONFIG_ACPI_APEI_GHES is not set
# CONFIG_ACPI_APEI_PCIEAER is not set
# CONFIG_ACPI_APEI_MEMORY_FAILURE is not set
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m
CONFIG_X86_E_POWERSAVER=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_SET is not set
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
# CONFIG_IP_NF_MATCH_RPFILTER is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
# CONFIG_NF_NAT_IPV4 is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
# CONFIG_IP6_NF_MATCH_RPFILTER is not set
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_NF_NAT_IPV6 is not set

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_PORTS=8191
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=m
# CONFIG_L2TP_DEBUGFS is not set
# CONFIG_L2TP_V3 is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=m
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_6LOWPAN is not set
# CONFIG_MAC802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
CONFIG_NET_SCH_INGRESS=m
# CONFIG_NET_SCH_PLUG is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
# CONFIG_SCC_DELAY is not set
# CONFIG_SCC_TRXECHO is not set
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIUART_3WIRE is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_BT_WILINK is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_CMA is not set

#
# Bus devices
#
CONFIG_CONNECTOR=m
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m
# CONFIG_MTD_SWAP is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_L440GX=m
CONFIG_MTD_INTEL_VR_NOR=m
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
CONFIG_MTD_DOC2001PLUS=m
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND_ECC=m
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_ECC_BCH is not set
CONFIG_MTD_SM_COMMON=m
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_DENALI=m
# CONFIG_MTD_NAND_DENALI_PCI is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
# CONFIG_MTD_NAND_DOCG4 is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
# CONFIG_MTD_ONENAND_SIM is not set

#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_NVME is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32000
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=m

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
# CONFIG_INTEL_MID_PTI is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_CS5535_MFGPT=m
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085_I2C is not set
CONFIG_PCH_PHUB=m
# CONFIG_USB_SWITCH_FSA9480 is not set
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=m

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_IDE_LEGACY=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=m
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_CS5535=m
CONFIG_BLK_DEV_CS5536=m
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8172=m
CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_TC86C001=m

#
# Other IDE chipsets support
#

#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=m
CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=m
CONFIG_BLK_DEV_HT6560B=m
CONFIG_BLK_DEV_QD65XX=m
CONFIG_BLK_DEV_UMC8672=m
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
# CONFIG_SCSI_BNX2X_FCOE is not set
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
# CONFIG_SCSI_MVUMI is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_UFSHCD is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_VMWARE_PVSCSI=m
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_ISCI is not set
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_BFA_FC=m
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_HIGHBANK is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARASAN_CF is not set
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5535=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_QDI=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_WINBOND_VLB=m

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
# CONFIG_DM_THIN_PROVISIONING is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_RAID=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_LOOPBACK_TARGET is not set
# CONFIG_TCM_FC is not set
# CONFIG_ISCSI_TARGET is not set
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_MII=m
CONFIG_IFB=m
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
CONFIG_SUNGEM_PHY=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=m

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_LANCE=m
CONFIG_PCNET32=m
CONFIG_DEPCA=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_NI65=m
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_NET_CADENCE=y
# CONFIG_ARM_AT91_ETHER is not set
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_BNX2X=m
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
# CONFIG_CHELSIO_T1_1G is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_CS89x0=m
# CONFIG_CS89x0_PLATFORM is not set
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_EWRK3=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_AT1700=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_ETH16I=m
CONFIG_NET_VENDOR_HP=y
CONFIG_HP100=m
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
# CONFIG_IXGBE_HWMON is not set
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_IP1000=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
# CONFIG_MLX4_DEBUG is not set
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
# CONFIG_KS8851_MLL is not set
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_8390=y
CONFIG_EL2=m
CONFIG_AC3200=m
CONFIG_PCMCIA_AXNET=m
CONFIG_E2100=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_NE2000=m
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_ULTRA=m
CONFIG_WD80x3=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=m
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_SEEQ8005=m
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC9194=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
CONFIG_STMMAC_PLATFORM=y
# CONFIG_STMMAC_PCI is not set
# CONFIG_STMMAC_DEBUG_FS is not set
# CONFIG_STMMAC_DA is not set
CONFIG_STMMAC_RING=y
# CONFIG_STMMAC_CHAINED is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_NET_SB1000=m
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_BCM87XX_PHY is not set
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_MDIO_BITBANG is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_CDC_MBIM is not set
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
# CONFIG_USB_VL600 is not set
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_MWL8K=m
# CONFIG_ATH_CARDS is not set
CONFIG_B43=m
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
# CONFIG_B43_PHY_HT is not set
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_BRCMFMAC is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLWIFI=m
CONFIG_IWLDVM=m

#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLWIFI_P2P=y
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m

#
# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_HERMES=m
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
# CONFIG_RT2800PCI_RT33XX is not set
# CONFIG_RT2800PCI_RT35XX is not set
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
# CONFIG_RT2800USB_RT33XX is not set
# CONFIG_RT2800USB_RT35XX is not set
# CONFIG_RT2800USB_RT53XX is not set
# CONFIG_RT2800USB_UNKNOWN is not set
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8192CU is not set
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=m
# CONFIG_WL_TI is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
# CONFIG_MWIFIEX is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300TOO=m
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
# CONFIG_DSCC4_PCI_RST is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKEHARD is not set
CONFIG_VMXNET3=m
CONFIG_HYPERV_NET=m
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
# CONFIG_KEYBOARD_GPIO is not set
CONFIG_KEYBOARD_GPIO_POLLED=m
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=m
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_INPORT=m
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
CONFIG_TOUCHSCREEN_CY8CTMG110=m
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_ILI210X is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF8574=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
CONFIG_ISI=m
CONFIG_N_HDLC=m
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MFD_HSU=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_PCH_UART=m
# CONFIG_SERIAL_ARC is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=m
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
# CONFIG_TCG_TIS_I2C_INFINEON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_EG20T=m
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_INTEL_MID=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=m

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=m
# CONFIG_SCx200_I2C is not set
CONFIG_SCx200_ACB=m
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_PARPORT=m
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_IT8761E=m
# CONFIG_GPIO_TS5500 is not set
CONFIG_GPIO_SCH=m
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_VX855=m

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_ADP5588=m

#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=m
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_LANGWELL is not set
CONFIG_GPIO_PCH=m
CONFIG_GPIO_ML_IOH=m
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#

#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=m
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=m
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_FAM15H_POWER is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_GPIO_FAN=m
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95241=m
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_APPLESMC=m

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_FAIR_SHARE is not set
CONFIG_STEP_WISE=y
# CONFIG_USER_SPACE is not set
# CONFIG_CPU_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_GEODE_WDT=m
CONFIG_SC520_WDT=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
# CONFIG_IE6XX_WDT is not set
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_NV_TCO=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_SBC7240_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
# CONFIG_VIA_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m

#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_CS5535=m
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=m
CONFIG_LPC_ICH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_VX855=m
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set

#
# Supported MMC/SDIO adapters
#

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#

#
# Customise DVB Frontends
#
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_KMS is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_DRM_VMWGFX=m
# CONFIG_DRM_VMWGFX_FBCON is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
CONFIG_STUB_POULSBO=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_ADP8860=m
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_OT200 is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
# CONFIG_SND_ISA is not set
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_FM801=m
# CONFIG_SND_HDA_INTEL is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
# CONFIG_SND_LOLA is not set
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
# CONFIG_SND_USB_CAIAQ_INPUT is not set
CONFIG_SND_USB_US122L=m
# CONFIG_SND_USB_6FIRE is not set
CONFIG_SND_FIREWIRE=y
# CONFIG_SND_FIREWIRE_SPEAKERS is not set
# CONFIG_SND_ISIGHT is not set
# CONFIG_SND_SCS1X is not set
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=m
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
# CONFIG_HID_ICADE is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
CONFIG_HID_LOGITECH=m
# CONFIG_HID_LOGITECH_DJ is not set
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_PS3REMOTE is not set
CONFIG_HID_ROCCAT=m
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
# CONFIG_HID_HYPERV_MOUSE is not set
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=m
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_CHIPIDEA is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_STORAGE_ENE_UB6250 is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
# CONFIG_USB_SERIAL_ZTE is not set
CONFIG_USB_SERIAL_SSU100=m
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m

#
# USB Physical Layer drivers
#
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_RCAR_PHY is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP5521=m
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_DELL_NETBOOKS=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=m
CONFIG_INTEL_IOATDMA=m
CONFIG_TIMB_DMA=m
CONFIG_PCH_DMA=m
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=m
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_VIRTIO=m

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
# CONFIG_HYPERV_BALLOON is not set
CONFIG_STAGING=y
CONFIG_ET131X=m
CONFIG_SLICOSS=m
# CONFIG_USBIP_CORE is not set
CONFIG_W35UND=m
CONFIG_PRISM2_USB=m
CONFIG_ECHO=m
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
# CONFIG_COMEDI_ISA_DRIVERS is not set
# CONFIG_COMEDI_PCI_DRIVERS is not set
# CONFIG_COMEDI_PCMCIA_DRIVERS is not set
# CONFIG_COMEDI_USB_DRIVERS is not set
CONFIG_COMEDI_8255=m
CONFIG_ASUS_OLED=m
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_R8187SE=m
CONFIG_RTL8192U=m
# CONFIG_RTLLIB is not set
CONFIG_R8712U=m
# CONFIG_RTS5139 is not set
CONFIG_TRANZPORT=m
CONFIG_IDE_PHISON=m
CONFIG_LINE6_USB=m
# CONFIG_LINE6_USB_DUMP_PCM is not set
# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
CONFIG_USB_SERIAL_QUATECH2=m
CONFIG_VT6655=m
CONFIG_VT6656=m
CONFIG_DX_SEP=m
# CONFIG_ZSMALLOC is not set
CONFIG_WLAGS49_H2=m
CONFIG_WLAGS49_H25=m
CONFIG_FB_SM7XX=m
CONFIG_CRYSTALHD=m
CONFIG_CXT1E1=m
# CONFIG_SBE_PMCC4_NCOMM is not set
CONFIG_FB_XGI=m
CONFIG_ACPI_QUICKSTART=m
CONFIG_SBE_2T3E3=m
CONFIG_USB_ENESTORAGE=m
CONFIG_BCM_WIMAX=m
CONFIG_FT1000=m
CONFIG_FT1000_USB=m
# CONFIG_FT1000_PCMCIA is not set

#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_ACNTPC=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_DECPC=m
CONFIG_SPEAKUP_SYNTH_DTLK=m
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_CSR_WIFI is not set
CONFIG_NET_VENDOR_SILICOM=y
# CONFIG_SBYPASS is not set
# CONFIG_BPCTL is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
# CONFIG_SB105X is not set
# CONFIG_FIREWIRE_SERIAL is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
# CONFIG_DELL_WMI_AIO is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
# CONFIG_FUJITSU_TABLET is not set
CONFIG_TC1100_WMI=m
# CONFIG_HP_ACCEL is not set
CONFIG_HP_WMI=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
CONFIG_INTEL_MENLOW=m
CONFIG_EEEPC_LAPTOP=m
# CONFIG_ASUS_WMI is not set
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_IPS=m
CONFIG_IBM_RTL=m
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_INTEL_IOMMU is not set

#
# Remoteproc drivers (EXPERIMENTAL)
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_VME_BUS=m

#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=m
CONFIG_VME_TSI148=m

#
# VME Board Drivers
#
CONFIG_VMIVME_7805=m

#
# VME Device Drivers
#
CONFIG_VME_USER=m
# CONFIG_VME_PIO2 is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=m
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_LOGFS=m
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=m
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
# CONFIG_EXOFS_DEBUG is not set
# CONFIG_F2FS_FS is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_CEPH_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB2 is not set
CONFIG_CIFS_FSCACHE=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
# CONFIG_NCPFS_IOCTL_LOCKING is not set
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_PROVE_RCU_DELAY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_UPROBE_EVENT is not set
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_TRUSTED_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER_X86=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_VHOST_NET=m
# CONFIG_TCM_VHOST is not set
CONFIG_LGUEST=m
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set

Re: [PATCH 24/28] Remove DEPRECATED

[Randy Dunlap]

On 02/09/2014 07:46 PM, Gene Heskett wrote:
> On Sunday 09 February 2014, Randy Dunlap wrote:
>> On 02/09/2014 07:07 PM, Ken Moffat wrote:
>>> On Sun, Feb 09, 2014 at 06:05:41PM -0500, Gene Heskett wrote:
>>>> On Sunday 09 February 2014, Paul Bolle wrote:
>>>>> Feel free to open a new thread, with the relevant details, and
>>>>> involve the relevant people and lists. I have no idea what you're
>>>>> going on about and could not care less (in the context of this
>>>>> thread).
>>>>>
>>>>>
>>>>> Paul Bolle
>>>>
>>>> Been tried, got zero response.  Frankly, posting just to lkml, hoping
>>>> the revalent people see it, is beginning to act like posting to a
>>>> black hole.
>>>>
>>>  I saw one response to you, from Randy Dunlap, asking for more
>>>
>>> information : https://lkml.org/lkml/2014/2/8/153
>>
>> wow, I don't know how I saw this message (thanks, Ken),
>> but replying to this patch was NOT the right thing to do, Gene.
>>
>> Just reply to my request and I'll be glad to look into it.
>>
>>>  After your posts a few days ago, I'm tempted to suggest you check
>>>
>>> your spam filters, and also any mail files your virus scanner might
>>> have quarantined.  But it is also possible that you just haven't
>>> received it - email is like that.
>>>
>>> ؤ¸en
> 
> Spam and viri filters watched carefully.  I also use mailfilter, and watch 
> its logs full time for FP's.

Still -- this ATSC problem should not be part of a reply to the Remove DEPRECATED patch.


> And I didn't reply because the question seemed way too broad, almost as if 

what question seemed to broad?

> my lament wasn't read.  That and the mail server doesn't like big 

what mail server?  yours?  wdtv?  vger.kernel.org certainly has no problem with them.

> attachments. So rather than reply to the list, I'll excise some of the 
> addresses that bounce from a reply_all or don't like me, and send the 
> .config from a 3.019 build which seems ok, but by the time that config is 
> run thru a make oldconfig at 3.8.2, most all the media, ATSC and DVB stuff 
> is gone.  So I'll attach that one too.  The later file grew 22kb, but 
> wholesale parts of the first one are missing from the 2nd.

Gene, I want to make sure where you are saying the problem is.
Is it going directly from 3.019 to 3.8.2, with no intervening kernel versions?

I don't know what kernel version 3.019 is.  Do you mean 3.0.19?
or is that some distro numbering?

> 
> I've look at Makefile, but most Makefiles are swahili to me so I could be 
> looking at it and not recognizing it.
> 
> Thank you all.
> 
> Cheers, Gene
> 


-- 
~Randy

make oldfonfig broken.

[Gene Heskett]

On Sunday 09 February 2014, Randy Dunlap wrote:
>On 02/09/2014 07:46 PM, Gene Heskett wrote:
>> On Sunday 09 February 2014, Randy Dunlap wrote:
>>> On 02/09/2014 07:07 PM, Ken Moffat wrote:
>>>> On Sun, Feb 09, 2014 at 06:05:41PM -0500, Gene Heskett wrote:
>>>>> On Sunday 09 February 2014, Paul Bolle wrote:
>>>>>> Feel free to open a new thread, with the relevant details, and
>>>>>> involve the relevant people and lists. I have no idea what you're
>>>>>> going on about and could not care less (in the context of this
>>>>>> thread).
>>>>>> 
>>>>>> 
>>>>>> Paul Bolle
>>>>> 
>>>>> Been tried, got zero response.  Frankly, posting just to lkml,
>>>>> hoping the revalent people see it, is beginning to act like posting
>>>>> to a black hole.
>>>>> 
>>>>  I saw one response to you, from Randy Dunlap, asking for more
>>>> 
>>>> information : https://lkml.org/lkml/2014/2/8/153
>>> 
>>> wow, I don't know how I saw this message (thanks, Ken),
>>> but replying to this patch was NOT the right thing to do, Gene.
>>> 
>>> Just reply to my request and I'll be glad to look into it.
>>> 
>>>>  After your posts a few days ago, I'm tempted to suggest you check
>>>> 
>>>> your spam filters, and also any mail files your virus scanner might
>>>> have quarantined.  But it is also possible that you just haven't
>>>> received it - email is like that.
>>>> 
>>>> ط¤آ¸en
>> 
>> Spam and viri filters watched carefully.  I also use mailfilter, and
>> watch its logs full time for FP's.
>
>Still -- this ATSC problem should not be part of a reply to the Remove
>DEPRECATED patch.

True.  But I got some attention.

>> And I didn't reply because the question seemed way too broad, almost as
>> if
>
>what question seemed to broad?

You wanted to see "a" config, but I wanted to show the diffs. Also 
yesterday I hadn't gone thru what I have yet to see where it falls apart.
>
>> my lament wasn't read.  That and the mail server doesn't like big
>
>what mail server?  yours?  wdtv?  vger.kernel.org certainly has no
>problem with them.

I have gotten bounced from lkml because a screen shot pix of a failed boot 
was too big.  Perhaps 18 months or so.  It was big, from a 10 megapixel 
camera.

>> attachments. So rather than reply to the list, I'll excise some of the
>> addresses that bounce from a reply_all or don't like me, and send the
>> .config from a 3.019 build which seems ok, but by the time that config
>> is run thru a make oldconfig at 3.8.2, most all the media, ATSC and
>> DVB stuff is gone.  So I'll attach that one too.  The later file grew
>> 22kb, but wholesale parts of the first one are missing from the 2nd.
>
>Gene, I want to make sure where you are saying the problem is.
>Is it going directly from 3.019 to 3.8.2, with no intervening kernel
>versions?

No, one intermediate step in this case.

I started with 3.0.19, which was fine, took that one to 3.2.40, and that 
one to 3.8.2 because I don't have anything between those here.  Not exactly 
a step by step.

>I don't know what kernel version 3.019 is.  Do you mean 3.0.19?

Yes, Joanne Dow would call that a typu for sure.

Thanks Randy.

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

NOTICE: Will pay 100 USD for an HP-4815A defective but
complete probe assembly.

Re: make oldfonfig broken.

[Randy Dunlap]

On 02/09/2014 08:14 PM, Gene Heskett wrote:
> On Sunday 09 February 2014, Randy Dunlap wrote:
>> On 02/09/2014 07:46 PM, Gene Heskett wrote:
>>> On Sunday 09 February 2014, Randy Dunlap wrote:
>>>> On 02/09/2014 07:07 PM, Ken Moffat wrote:
>>>>> On Sun, Feb 09, 2014 at 06:05:41PM -0500, Gene Heskett wrote:
>>>>>> On Sunday 09 February 2014, Paul Bolle wrote:
>>>>>>> Feel free to open a new thread, with the relevant details, and
>>>>>>> involve the relevant people and lists. I have no idea what you're
>>>>>>> going on about and could not care less (in the context of this
>>>>>>> thread).
>>>>>>>
>>>>>>>
>>>>>>> Paul Bolle
>>>>>>
>>>>>> Been tried, got zero response.  Frankly, posting just to lkml,
>>>>>> hoping the revalent people see it, is beginning to act like posting
>>>>>> to a black hole.
>>>>>>
>>>>>  I saw one response to you, from Randy Dunlap, asking for more
>>>>>
>>>>> information : https://lkml.org/lkml/2014/2/8/153
>>>>
>>>> wow, I don't know how I saw this message (thanks, Ken),
>>>> but replying to this patch was NOT the right thing to do, Gene.
>>>>
>>>> Just reply to my request and I'll be glad to look into it.
>>>>
>>>>>  After your posts a few days ago, I'm tempted to suggest you check
>>>>>
>>>>> your spam filters, and also any mail files your virus scanner might
>>>>> have quarantined.  But it is also possible that you just haven't
>>>>> received it - email is like that.
>>>>>
>>>>> ط¤آ¸en
>>>
>>> Spam and viri filters watched carefully.  I also use mailfilter, and
>>> watch its logs full time for FP's.
>>
>> Still -- this ATSC problem should not be part of a reply to the Remove
>> DEPRECATED patch.
> 
> True.  But I got some attention.
> 
>>> And I didn't reply because the question seemed way too broad, almost as
>>> if
>>
>> what question seemed to broad?
> 
> You wanted to see "a" config, but I wanted to show the diffs. Also 
> yesterday I hadn't gone thru what I have yet to see where it falls apart.
>>
>>> my lament wasn't read.  That and the mail server doesn't like big
>>
>> what mail server?  yours?  wdtv?  vger.kernel.org certainly has no
>> problem with them.
> 
> I have gotten bounced from lkml because a screen shot pix of a failed boot 
> was too big.  Perhaps 18 months or so.  It was big, from a 10 megapixel 
> camera.
> 
>>> attachments. So rather than reply to the list, I'll excise some of the
>>> addresses that bounce from a reply_all or don't like me, and send the
>>> .config from a 3.019 build which seems ok, but by the time that config
>>> is run thru a make oldconfig at 3.8.2, most all the media, ATSC and
>>> DVB stuff is gone.  So I'll attach that one too.  The later file grew
>>> 22kb, but wholesale parts of the first one are missing from the 2nd.
>>
>> Gene, I want to make sure where you are saying the problem is.
>> Is it going directly from 3.019 to 3.8.2, with no intervening kernel
>> versions?
> 
> No, one intermediate step in this case.
> 
> I started with 3.0.19, which was fine, took that one to 3.2.40, and that 
> one to 3.8.2 because I don't have anything between those here.  Not exactly 
> a step by step.

and when you go from one kernel version to the next, do you use

$ make oldconfig
and answer all of its questions, or do you use

$ yes '' | make oldconfig

or some other variant?  (I guess in your super build script.)

>> I don't know what kernel version 3.019 is.  Do you mean 3.0.19?
> 
> Yes, Joanne Dow would call that a typu for sure.
> 
> Thanks Randy.
> 
> Cheers, Gene
> 

-- 
~Randy

Re: make oldfonfig broken.

[Gene Heskett]

On Sunday 09 February 2014, Randy Dunlap wrote:
>On 02/09/2014 08:14 PM, Gene Heskett wrote:
>> On Sunday 09 February 2014, Randy Dunlap wrote:
>>> On 02/09/2014 07:46 PM, Gene Heskett wrote:
>>>> On Sunday 09 February 2014, Randy Dunlap wrote:
>>>>> On 02/09/2014 07:07 PM, Ken Moffat wrote:
>>>>>> On Sun, Feb 09, 2014 at 06:05:41PM -0500, Gene Heskett wrote:
>>>>>>> On Sunday 09 February 2014, Paul Bolle wrote:
>>>>>>>> Feel free to open a new thread, with the relevant details, and
>>>>>>>> involve the relevant people and lists. I have no idea what you're
>>>>>>>> going on about and could not care less (in the context of this
>>>>>>>> thread).
>>>>>>>> 
>>>>>>>> 
>>>>>>>> Paul Bolle
>>>>>>> 
>>>>>>> Been tried, got zero response.  Frankly, posting just to lkml,
>>>>>>> hoping the revalent people see it, is beginning to act like
>>>>>>> posting to a black hole.
>>>>>>> 
>>>>>>  I saw one response to you, from Randy Dunlap, asking for more
>>>>>> 
>>>>>> information : https://lkml.org/lkml/2014/2/8/153
>>>>> 
>>>>> wow, I don't know how I saw this message (thanks, Ken),
>>>>> but replying to this patch was NOT the right thing to do, Gene.
>>>>> 
>>>>> Just reply to my request and I'll be glad to look into it.
>>>>> 
>>>>>>  After your posts a few days ago, I'm tempted to suggest you check
>>>>>> 
>>>>>> your spam filters, and also any mail files your virus scanner might
>>>>>> have quarantined.  But it is also possible that you just haven't
>>>>>> received it - email is like that.
>>>>>> 
>>>>>> ط¤آ¸en
>>>> 
>>>> Spam and viri filters watched carefully.  I also use mailfilter, and
>>>> watch its logs full time for FP's.
>>> 
>>> Still -- this ATSC problem should not be part of a reply to the Remove
>>> DEPRECATED patch.
>> 
>> True.  But I got some attention.
>> 
>>>> And I didn't reply because the question seemed way too broad, almost
>>>> as if
>>> 
>>> what question seemed to broad?
>> 
>> You wanted to see "a" config, but I wanted to show the diffs. Also
>> yesterday I hadn't gone thru what I have yet to see where it falls
>> apart.
>> 
>>>> my lament wasn't read.  That and the mail server doesn't like big
>>> 
>>> what mail server?  yours?  wdtv?  vger.kernel.org certainly has no
>>> problem with them.
>> 
>> I have gotten bounced from lkml because a screen shot pix of a failed
>> boot was too big.  Perhaps 18 months or so.  It was big, from a 10
>> megapixel camera.
>> 
>>>> attachments. So rather than reply to the list, I'll excise some of
>>>> the addresses that bounce from a reply_all or don't like me, and
>>>> send the .config from a 3.019 build which seems ok, but by the time
>>>> that config is run thru a make oldconfig at 3.8.2, most all the
>>>> media, ATSC and DVB stuff is gone.  So I'll attach that one too. 
>>>> The later file grew 22kb, but wholesale parts of the first one are
>>>> missing from the 2nd.
>>> 
>>> Gene, I want to make sure where you are saying the problem is.
>>> Is it going directly from 3.019 to 3.8.2, with no intervening kernel
>>> versions?
>> 
>> No, one intermediate step in this case.
>> 
>> I started with 3.0.19, which was fine, took that one to 3.2.40, and
>> that one to 3.8.2 because I don't have anything between those here. 
>> Not exactly a step by step.
>
>and when you go from one kernel version to the next, do you use
>
>$ make oldconfig
>and answer all of its questions, or do you use

I generally answer all its questions, or take the default by hitting enter, 
but I do read all its questions.

>$ yes '' | make oldconfig

Never done that in all these years.

>or some other variant?  (I guess in your super build script.)

This is long before my "super script" gets fired off.

And that part is actually working well, run it as root, do a grub-update 
and reboot.

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

NOTICE: Will pay 100 USD for an HP-4815A defective but
complete probe assembly.

Re: make oldfonfig broken.

[Randy Dunlap]

On 02/09/2014 08:32 PM, Gene Heskett wrote:
> On Sunday 09 February 2014, Randy Dunlap wrote:
>> On 02/09/2014 08:14 PM, Gene Heskett wrote:
>>> On Sunday 09 February 2014, Randy Dunlap wrote:
>>>> On 02/09/2014 07:46 PM, Gene Heskett wrote:
>>>>> On Sunday 09 February 2014, Randy Dunlap wrote:
>>>>>> On 02/09/2014 07:07 PM, Ken Moffat wrote:
>>>>>>> On Sun, Feb 09, 2014 at 06:05:41PM -0500, Gene Heskett wrote:
>>>>>>>> On Sunday 09 February 2014, Paul Bolle wrote:
>>>>>>>>> Feel free to open a new thread, with the relevant details, and
>>>>>>>>> involve the relevant people and lists. I have no idea what you're
>>>>>>>>> going on about and could not care less (in the context of this
>>>>>>>>> thread).
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Paul Bolle
>>>>>>>>
>>>>>>>> Been tried, got zero response.  Frankly, posting just to lkml,
>>>>>>>> hoping the revalent people see it, is beginning to act like
>>>>>>>> posting to a black hole.
>>>>>>>>
>>>>>>>  I saw one response to you, from Randy Dunlap, asking for more
>>>>>>>
>>>>>>> information : https://lkml.org/lkml/2014/2/8/153
>>>>>>
>>>>>> wow, I don't know how I saw this message (thanks, Ken),
>>>>>> but replying to this patch was NOT the right thing to do, Gene.
>>>>>>
>>>>>> Just reply to my request and I'll be glad to look into it.
>>>>>>
>>>>>>>  After your posts a few days ago, I'm tempted to suggest you check
>>>>>>>
>>>>>>> your spam filters, and also any mail files your virus scanner might
>>>>>>> have quarantined.  But it is also possible that you just haven't
>>>>>>> received it - email is like that.
>>>>>>>
>>>>>>> ط¤آ¸en
>>>>>
>>>>> Spam and viri filters watched carefully.  I also use mailfilter, and
>>>>> watch its logs full time for FP's.
>>>>
>>>> Still -- this ATSC problem should not be part of a reply to the Remove
>>>> DEPRECATED patch.
>>>
>>> True.  But I got some attention.
>>>
>>>>> And I didn't reply because the question seemed way too broad, almost
>>>>> as if
>>>>
>>>> what question seemed to broad?
>>>
>>> You wanted to see "a" config, but I wanted to show the diffs. Also
>>> yesterday I hadn't gone thru what I have yet to see where it falls
>>> apart.
>>>
>>>>> my lament wasn't read.  That and the mail server doesn't like big
>>>>
>>>> what mail server?  yours?  wdtv?  vger.kernel.org certainly has no
>>>> problem with them.
>>>
>>> I have gotten bounced from lkml because a screen shot pix of a failed
>>> boot was too big.  Perhaps 18 months or so.  It was big, from a 10
>>> megapixel camera.
>>>
>>>>> attachments. So rather than reply to the list, I'll excise some of
>>>>> the addresses that bounce from a reply_all or don't like me, and
>>>>> send the .config from a 3.019 build which seems ok, but by the time
>>>>> that config is run thru a make oldconfig at 3.8.2, most all the
>>>>> media, ATSC and DVB stuff is gone.  So I'll attach that one too. 
>>>>> The later file grew 22kb, but wholesale parts of the first one are
>>>>> missing from the 2nd.
>>>>
>>>> Gene, I want to make sure where you are saying the problem is.
>>>> Is it going directly from 3.019 to 3.8.2, with no intervening kernel
>>>> versions?
>>>
>>> No, one intermediate step in this case.
>>>
>>> I started with 3.0.19, which was fine, took that one to 3.2.40, and
>>> that one to 3.8.2 because I don't have anything between those here. 
>>> Not exactly a step by step.
>>
>> and when you go from one kernel version to the next, do you use
>>
>> $ make oldconfig
>> and answer all of its questions, or do you use
> 
> I generally answer all its questions, or take the default by hitting enter, 
> but I do read all its questions.
> 
>> $ yes '' | make oldconfig
> 
> Never done that in all these years.
> 
>> or some other variant?  (I guess in your super build script.)
> 
> This is long before my "super script" gets fired off.
> 
> And that part is actually working well, run it as root, do a grub-update 
> and reboot.
> 
> Cheers, Gene
> 

You need to have a Kconfig symbol named DVB_CORE enabled.

In 3.8.2 (and likely previously, but not in 3.2.40),
DVB_CORE depends on having both MEDIA_SUPPORT and MEDIA_DIGITAL_TV_SUPPORT
enabled.  Your .confile file  has MEDIA_SUPPORT enabled but not
MEDIA_DIGITAL_TV_SUPPORT.

In your 3.2.40 kernel source tree, just edit your .config file and delete the line
that says:
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set

then run [1]
$ make oldconfig
and it will ask you how to set the Kconfig symbol.  Tell it 'y'.

and if you can find this line in your .config file:
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

delete it. Run 'make oldconfig' again if you did so at [1] above.
For this Kconfig question:
  Autoselect tuners and i2c modules to build (MEDIA_SUBDRV_AUTOSELECT),
answer N.
Then you can select all of the tuners and frontends that you want.
There are LOTS of them to choose from.

IIRC, this all happened because someone decided that they could make the AUTOSELECT
driver feature Better!  ugh.

Good luck. Let me know if you need more guidance.


-- 
~Randy

Re: make oldfonfig broken.

[Gene Heskett]

On Monday 10 February 2014, Randy Dunlap wrote:
[...]
>>>>> Gene, I want to make sure where you are saying the problem is.
>>>>> Is it going directly from 3.019 to 3.8.2, with no intervening kernel
>>>>> versions?
>>>> 
>>>> No, one intermediate step in this case.
>>>> 
>>>> I started with 3.0.19, which was fine, took that one to 3.2.40, and
>>>> that one to 3.8.2 because I don't have anything between those here.
>>>> Not exactly a step by step.
>>> 
>>> and when you go from one kernel version to the next, do you use
>>> 
>>> $ make oldconfig
>>> and answer all of its questions, or do you use
>> 
>> I generally answer all its questions, or take the default by hitting
>> enter, but I do read all its questions.
>> 
>>> $ yes '' | make oldconfig
>> 
>> Never done that in all these years.
>> 
>>> or some other variant?  (I guess in your super build script.)
>> 
>> This is long before my "super script" gets fired off.
>> 
>> And that part is actually working well, run it as root, do a
>> grub-update and reboot.
>> 
>> Cheers, Gene
>
>You need to have a Kconfig symbol named DVB_CORE enabled.
>
>In 3.8.2 (and likely previously, but not in 3.2.40),
>DVB_CORE depends on having both MEDIA_SUPPORT and
>MEDIA_DIGITAL_TV_SUPPORT enabled.  Your .confile file  has MEDIA_SUPPORT
>enabled but not
>MEDIA_DIGITAL_TV_SUPPORT.
>
>In your 3.2.40 kernel source tree, just edit your .config file and delete
>the line that says:
># CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
>
>then run [1]
>$ make oldconfig
>and it will ask you how to set the Kconfig symbol.  Tell it 'y'.
>
>and if you can find this line in your .config file:
>CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
>
>delete it. Run 'make oldconfig' again if you did so at [1] above.
>For this Kconfig question:
>  Autoselect tuners and i2c modules to build (MEDIA_SUBDRV_AUTOSELECT),
>answer N.
>Then you can select all of the tuners and frontends that you want.
>There are LOTS of them to choose from.
>
>IIRC, this all happened because someone decided that they could make the
>AUTOSELECT driver feature Better!  ugh.
>
>Good luck. Let me know if you need more guidance.

Printed. That sounds as if I ought to be able to do it, which I will take a 
shot at tomorrow.

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

NOTICE: Will pay 100 USD for an HP-4815A defective but
complete probe assembly.

Re: make oldfonfig broken.

[Gene Heskett]

On Monday 10 February 2014, Randy Dunlap wrote:
>On 02/09/2014 08:32 PM, Gene Heskett wrote:
>AUTOSELECT driver feature Better!  ugh.

Spit.  I presume geneology discussions are off topic. :)
>
>Good luck. Let me know if you need more guidance.

Hat in hand, I figured I had better get the first one that fails, 3.2.40, 
to work before I carried that fwd to a more current kernel, but 5 or 6 
builds & boot failure later I am stumped.

The boot gets to top_init, reports the / drive is unavailable and it cannot 
load /lib/modules/3.2.40/modules.dep, which does exist.

Stops, times out in about a minute and falls thru to the busybox shell, and 
of course my keyboard and mouse are wireless to usb, so neither work, reset 
button tap time.

The only reason I can deduce is that because the drive isn't mounted, 
something is still missing, either in the vmlinuz file or in the initrd 
file.

This most working 3.12.9 bootup shows:
 
gene@coyote:~/src/linux-3.2.40$ lsmod |grep sata
sata_nv                16890  12 
libata                146855  2 pata_amd,sata_nv

And I'm pretty sure all that is in the initrd.

Except according to grep, none of that is in 
/lib/modules/3.2.40/modules.dep

And I cannot find anyplace in a make xconfig that mentions libata.
So obviously my .config is still fubared. It does grep in the other  
modules.dep files for several other versions.

In fact, no .config I have mentions it. At my age the hair is thinning 
quickly enough.

So, Next please?  libata is missing, and so is sata_nv in spite of that 
being enabled:

gene@coyote:~/src/linux-3.2.40$ grep SATA_NV .config
CONFIG_SATA_NV=y

But I see thats builtin, but it didn't help.

Thanks all.

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

NOTICE: Will pay 100 USD for an HP-4815A defective but
complete probe assembly.

Re: make oldfonfig broken.

[Randy Dunlap]

On 02/10/2014 12:21 PM, Gene Heskett wrote:
> On Monday 10 February 2014, Randy Dunlap wrote:
>> On 02/09/2014 08:32 PM, Gene Heskett wrote:
>> AUTOSELECT driver feature Better!  ugh.
> 
> Spit.  I presume geneology discussions are off topic. :)
>>
>> Good luck. Let me know if you need more guidance.
> 
> Hat in hand, I figured I had better get the first one that fails, 3.2.40, 
> to work before I carried that fwd to a more current kernel, but 5 or 6 
> builds & boot failure later I am stumped.
> 
> The boot gets to top_init, reports the / drive is unavailable and it cannot 
> load /lib/modules/3.2.40/modules.dep, which does exist.
> 
> Stops, times out in about a minute and falls thru to the busybox shell, and 
> of course my keyboard and mouse are wireless to usb, so neither work, reset 
> button tap time.
> 
> The only reason I can deduce is that because the drive isn't mounted, 
> something is still missing, either in the vmlinuz file or in the initrd 
> file.
> 
> This most working 3.12.9 bootup shows:
>  
> gene@coyote:~/src/linux-3.2.40$ lsmod |grep sata
> sata_nv                16890  12 
> libata                146855  2 pata_amd,sata_nv
> 
> And I'm pretty sure all that is in the initrd.
> 
> Except according to grep, none of that is in 
> /lib/modules/3.2.40/modules.dep
> 
> And I cannot find anyplace in a make xconfig that mentions libata.
> So obviously my .config is still fubared. It does grep in the other  
> modules.dep files for several other versions.
> 
> In fact, no .config I have mentions it. At my age the hair is thinning 
> quickly enough.
> 
> So, Next please?  libata is missing, and so is sata_nv in spite of that 
> being enabled:

It's missing as a loadable module, but that's OK since it's builtin.

> gene@coyote:~/src/linux-3.2.40$ grep SATA_NV .config
> CONFIG_SATA_NV=y
> 
> But I see thats builtin, but it didn't help.

Your .config has (I believe)
CONFIG_ATA=y
and that is what builds libata.

Any other clues?


-- 
~Randy

Re: make oldfonfig broken.

[Gene Heskett]

[-- Attachment #1: Type: Text/Plain, Size: 3988 bytes --]

On Monday 10 February 2014, Randy Dunlap wrote:
>On 02/10/2014 12:21 PM, Gene Heskett wrote:
>> On Monday 10 February 2014, Randy Dunlap wrote:
>>> On 02/09/2014 08:32 PM, Gene Heskett wrote:
>>> AUTOSELECT driver feature Better!  ugh.
>> 
>> Spit.  I presume geneology discussions are off topic. :)
>> 
>>> Good luck. Let me know if you need more guidance.
>> 
>> Hat in hand, I figured I had better get the first one that fails,
>> 3.2.40, to work before I carried that fwd to a more current kernel,
>> but 5 or 6 builds & boot failure later I am stumped.
>> 
>> The boot gets to top_init, reports the / drive is unavailable and it
>> cannot load /lib/modules/3.2.40/modules.dep, which does exist.
>> 
>> Stops, times out in about a minute and falls thru to the busybox shell,
>> and of course my keyboard and mouse are wireless to usb, so neither
>> work, reset button tap time.
>> 
>> The only reason I can deduce is that because the drive isn't mounted,
>> something is still missing, either in the vmlinuz file or in the initrd
>> file.
>> 
>> This most working 3.12.9 bootup shows:
>> 
>> gene@coyote:~/src/linux-3.2.40$ lsmod |grep sata
>> sata_nv                16890  12
>> libata                146855  2 pata_amd,sata_nv
>> 
>> And I'm pretty sure all that is in the initrd.
>> 
>> Except according to grep, none of that is in
>> /lib/modules/3.2.40/modules.dep
>> 
>> And I cannot find anyplace in a make xconfig that mentions libata.
>> So obviously my .config is still fubared. It does grep in the other
>> modules.dep files for several other versions.
>> 
>> In fact, no .config I have mentions it. At my age the hair is thinning
>> quickly enough.
>> 
>> So, Next please?  libata is missing, and so is sata_nv in spite of that
>
>> being enabled:
>It's missing as a loadable module, but that's OK since it's builtin.
>
>> gene@coyote:~/src/linux-3.2.40$ grep SATA_NV .config
>> CONFIG_SATA_NV=y
>> 
>> But I see thats builtin, but it didn't help.
>
>Your .config has (I believe)
>CONFIG_ATA=y
>and that is what builds libata.
>
>Any other clues?

Not that I see in the build trace. grepping:
gene@coyote:~/src/linux-3.2.40$ grep CONFIG_ATA .config
CONFIG_ATALK=m
# CONFIG_ATA_OVER_ETH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_ATA_SFF=y
CONFIG_ATA_BMDMA=y
# CONFIG_ATA_PIIX is not set
CONFIG_ATA_GENERIC=m

And it seems to be building libata:
gene@coyote:~/src/linux-3.2.40/drivers/ata$ ls -l|grep libata|grep .o
-rw-r--r-- 1 root root  10236 2014-02-10 18:19 libata-acpi.o
-rw-rw-r-- 1 gene gene 175870 2013-03-05 22:24 libata-core.c
-rw-r--r-- 1 root root  89616 2014-02-10 18:19 libata-core.o
-rw-r--r-- 1 root root  35904 2014-02-10 18:19 libata-eh.o
-rw-r--r-- 1 root root 222732 2014-02-10 18:19 libata.o
-rw-r--r-- 1 root root  12072 2014-02-10 18:19 libata-pmp.o
-rw-r--r-- 1 root root  37156 2014-02-10 18:19 libata-scsi.o
-rw-r--r-- 1 root root  40996 2014-02-10 18:19 libata-sff.o
-rw-rw-r-- 1 gene gene  19559 2013-03-05 22:24 libata-transport.c
-rw-rw-r-- 1 gene gene    536 2013-03-05 22:24 libata-transport.h
-rw-r--r-- 1 root root  11772 2014-02-10 18:19 libata-transport.o

But libata.ko is not making it into the initrd, nor the modules.dep for 
3.2.40.

I been playing 20 monkeys changing one ata related thing at a time & doing 
a sudo time -p ./makeit to check, not much use rebooting to check until I 
see it.

I'll go gedit .config & change CONFIG_ATA to = m & try one more time.

Got it, test reboot time.  Made it 2 lines farther, "switching to clock 
source TSC" then fell through to the busybox prompt with all inputs dead.

Sigh.

.config attached if you've got time.

Thanks Randy

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

NOTICE: Will pay 100 USD for an HP-4815A defective but
complete probe assembly.


[-- Attachment #2: .config --]
[-- Type: text/x-mpsub, Size: 93658 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.2.40 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="coyote.coyote.den"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=5
CONFIG_RCU_BOOST_DELAY=100
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_CMPXCHG_DOUBLE=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
# CONFIG_CPU_SUP_CYRIX_32 is not set
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
# CONFIG_CPU_SUP_UMC_32 is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_HOTPLUG_CPU is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=m
CONFIG_ACPI_CUSTOM_METHOD=m
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_ALIX is not set
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
CONFIG_NF_CONNTRACK_SANE=m
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=m
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_FILTER is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m

#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=m
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_6LOWPAN is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_OSD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
# CONFIG_IWMC3200TOP is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_ENCLOSURE is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=m
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
# CONFIG_NET_FC is not set
CONFIG_MII=m
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKEHARD is not set
CONFIG_IFB=m
# CONFIG_MACVLAN is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_NET_VENDOR_ALTEON is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_ZNET is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_SEEQ=y
# CONFIG_SEEQ8005 is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
# CONFIG_SFC is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_TR is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
# CONFIG_USB_NET_KALMIA is not set
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
# CONFIG_USB_VL600 is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_WANXL_BUILD_FIRMWARE is not set
CONFIG_PC300TOO=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
# CONFIG_DSCC4_PCI_RST is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
CONFIG_VMXNET3=m
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1680
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
CONFIG_KEYBOARD_GPIO_POLLED=m
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
CONFIG_TOUCHSCREEN_CY8CTMG110=m
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF8574=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
CONFIG_ISI=m
CONFIG_N_HDLC=m
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_VX855 is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=m
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_CORE is not set
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=m
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
# CONFIG_RC_CORE is not set
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_CUSTOMISE=y

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_MSP3400=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m

#
# Video and audio decoders
#

#
# MPEG video encoders
#

#
# Video encoders
#

#
# Camera sensor devices
#
CONFIG_VIDEO_MT9V011=m

#
# Flash devices
#

#
# Video improvement chips
#

#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BWQCAM is not set
CONFIG_VIDEO_CQCAM=m
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_SAA7164 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
# CONFIG_USB_GSPCA_NW80X is not set
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
# CONFIG_USB_GSPCA_VICAM is not set
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported SDMC DM1105 Adapters
#

#
# Supported FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set

#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set

#
# Supported Mantis Adapters
#

#
# Supported nGene Adapters
#
# CONFIG_DVB_NGENE is not set

#
# Supported ddbridge ('Octopus') Adapters
#
CONFIG_DVB_DDBRIDGE=m

#
# Supported DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_ZL10036 is not set
# CONFIG_DVB_ZL10039 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_STV6110 is not set
# CONFIG_DVB_STV0900 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_SI21XX is not set
# CONFIG_DVB_DS3000 is not set
# CONFIG_DVB_MB86A16 is not set
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
# CONFIG_DVB_STV0367 is not set
CONFIG_DVB_CXD2820R=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_IT913X_FE=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=m
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_NVIDIA=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_VMWGFX=m
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=m
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PROGEAR=m
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_ADP8860=m
# CONFIG_BACKLIGHT_ADP8870 is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
# CONFIG_SND_USB_CAIAQ_INPUT is not set
CONFIG_SND_USB_US122L=m
# CONFIG_SND_USB_6FIRE is not set
CONFIG_SND_FIREWIRE=y
# CONFIG_SND_FIREWIRE_SPEAKERS is not set
# CONFIG_SND_ISIGHT is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
CONFIG_HID_KEYTOUCH=m
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_GARMIN=m
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_MMIO is not set
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_RTS_PSTOR is not set
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_POHMELFS is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_NOUVEAU_DEBUG is not set

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VME_BUS is not set
# CONFIG_DX_SEP is not set
# CONFIG_IIO is not set
CONFIG_XVMALLOC=y
CONFIG_ZRAM=m
# CONFIG_ZRAM_DEBUG is not set
# CONFIG_ZCACHE is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_CXT1E1 is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_SBE_2T3E3 is not set
CONFIG_USB_ENESTORAGE=m
# CONFIG_BCM_WIMAX is not set
CONFIG_FT1000=m
CONFIG_FT1000_USB=m

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_DRM_PSB is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_DVB_AS102 is not set
# CONFIG_DVB_CXD2099 is not set
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_EASYCAP is not set
# CONFIG_SOLO6X10 is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
CONFIG_MXM_WMI=m
# CONFIG_SAMSUNG_Q10 is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_INTEL_IOMMU is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_HYPERV is not set
# CONFIG_PM_DEVFREQ is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_SIGMA is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_CEPH_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_ACL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set

Re: make oldfonfig broken.

[Randy Dunlap]

On 02/10/2014 04:13 PM, Gene Heskett wrote:
> On Monday 10 February 2014, Randy Dunlap wrote:
>> On 02/10/2014 12:21 PM, Gene Heskett wrote:
>>> On Monday 10 February 2014, Randy Dunlap wrote:
>>>> On 02/09/2014 08:32 PM, Gene Heskett wrote:
>>>> AUTOSELECT driver feature Better!  ugh.
>>>
>>> Spit.  I presume geneology discussions are off topic. :)
>>>
>>>> Good luck. Let me know if you need more guidance.
>>>
>>> Hat in hand, I figured I had better get the first one that fails,
>>> 3.2.40, to work before I carried that fwd to a more current kernel,
>>> but 5 or 6 builds & boot failure later I am stumped.
>>>
>>> The boot gets to top_init, reports the / drive is unavailable and it
>>> cannot load /lib/modules/3.2.40/modules.dep, which does exist.
>>>
>>> Stops, times out in about a minute and falls thru to the busybox shell,
>>> and of course my keyboard and mouse are wireless to usb, so neither
>>> work, reset button tap time.
>>>
>>> The only reason I can deduce is that because the drive isn't mounted,
>>> something is still missing, either in the vmlinuz file or in the initrd
>>> file.
>>>
>>> This most working 3.12.9 bootup shows:
>>>
>>> gene@coyote:~/src/linux-3.2.40$ lsmod |grep sata
>>> sata_nv                16890  12
>>> libata                146855  2 pata_amd,sata_nv
>>>
>>> And I'm pretty sure all that is in the initrd.
>>>
>>> Except according to grep, none of that is in
>>> /lib/modules/3.2.40/modules.dep
>>>
>>> And I cannot find anyplace in a make xconfig that mentions libata.
>>> So obviously my .config is still fubared. It does grep in the other
>>> modules.dep files for several other versions.
>>>
>>> In fact, no .config I have mentions it. At my age the hair is thinning
>>> quickly enough.
>>>
>>> So, Next please?  libata is missing, and so is sata_nv in spite of that
>>
>>> being enabled:
>> It's missing as a loadable module, but that's OK since it's builtin.
>>
>>> gene@coyote:~/src/linux-3.2.40$ grep SATA_NV .config
>>> CONFIG_SATA_NV=y
>>>
>>> But I see thats builtin, but it didn't help.
>>
>> Your .config has (I believe)
>> CONFIG_ATA=y
>> and that is what builds libata.
>>
>> Any other clues?
> 
> Not that I see in the build trace. grepping:
> gene@coyote:~/src/linux-3.2.40$ grep CONFIG_ATA .config
> CONFIG_ATALK=m
> # CONFIG_ATA_OVER_ETH is not set
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_VERBOSE_ERROR=y
> CONFIG_ATA_ACPI=y
> CONFIG_ATA_SFF=y
> CONFIG_ATA_BMDMA=y
> # CONFIG_ATA_PIIX is not set
> CONFIG_ATA_GENERIC=m
> 
> And it seems to be building libata:
> gene@coyote:~/src/linux-3.2.40/drivers/ata$ ls -l|grep libata|grep .o
> -rw-r--r-- 1 root root  10236 2014-02-10 18:19 libata-acpi.o
> -rw-rw-r-- 1 gene gene 175870 2013-03-05 22:24 libata-core.c
> -rw-r--r-- 1 root root  89616 2014-02-10 18:19 libata-core.o
> -rw-r--r-- 1 root root  35904 2014-02-10 18:19 libata-eh.o
> -rw-r--r-- 1 root root 222732 2014-02-10 18:19 libata.o
> -rw-r--r-- 1 root root  12072 2014-02-10 18:19 libata-pmp.o
> -rw-r--r-- 1 root root  37156 2014-02-10 18:19 libata-scsi.o
> -rw-r--r-- 1 root root  40996 2014-02-10 18:19 libata-sff.o
> -rw-rw-r-- 1 gene gene  19559 2013-03-05 22:24 libata-transport.c
> -rw-rw-r-- 1 gene gene    536 2013-03-05 22:24 libata-transport.h
> -rw-r--r-- 1 root root  11772 2014-02-10 18:19 libata-transport.o
> 
> But libata.ko is not making it into the initrd, nor the modules.dep for 
> 3.2.40.

Since CONFIG_ATA=y, it's builtin, not a loadable module (.ko), so it won't
be in the initrd or modules.dep.

> I been playing 20 monkeys changing one ata related thing at a time & doing 
> a sudo time -p ./makeit to check, not much use rebooting to check until I 
> see it.
> 
> I'll go gedit .config & change CONFIG_ATA to = m & try one more time.
> 
> Got it, test reboot time.  Made it 2 lines farther, "switching to clock 
> source TSC" then fell through to the busybox prompt with all inputs dead.
> 
> Sigh.
> 
> .config attached if you've got time.
> 
> Thanks Randy
> 
> Cheers, Gene
> 

I'll look at it Tuesday morning.

-- 
~Randy

Re: make oldfonfig broken.

[Randy Dunlap]

On 02/10/2014 04:13 PM, Gene Heskett wrote:
> On Monday 10 February 2014, Randy Dunlap wrote:
>> On 02/10/2014 12:21 PM, Gene Heskett wrote:
>>> On Monday 10 February 2014, Randy Dunlap wrote:
>>>> On 02/09/2014 08:32 PM, Gene Heskett wrote:
>>>> AUTOSELECT driver feature Better!  ugh.
>>>
>>> Spit.  I presume geneology discussions are off topic. :)
>>>
>>>> Good luck. Let me know if you need more guidance.
>>>
>>> Hat in hand, I figured I had better get the first one that fails,
>>> 3.2.40, to work before I carried that fwd to a more current kernel,
>>> but 5 or 6 builds & boot failure later I am stumped.
>>>
>>> The boot gets to top_init, reports the / drive is unavailable and it
>>> cannot load /lib/modules/3.2.40/modules.dep, which does exist.
>>>
>>> Stops, times out in about a minute and falls thru to the busybox shell,
>>> and of course my keyboard and mouse are wireless to usb, so neither
>>> work, reset button tap time.
>>>
>>> The only reason I can deduce is that because the drive isn't mounted,
>>> something is still missing, either in the vmlinuz file or in the initrd
>>> file.
>>>
>>> This most working 3.12.9 bootup shows:
>>>
>>> gene@coyote:~/src/linux-3.2.40$ lsmod |grep sata
>>> sata_nv                16890  12
>>> libata                146855  2 pata_amd,sata_nv
>>>
>>> And I'm pretty sure all that is in the initrd.
>>>
>>> Except according to grep, none of that is in
>>> /lib/modules/3.2.40/modules.dep
>>>
>>> And I cannot find anyplace in a make xconfig that mentions libata.
>>> So obviously my .config is still fubared. It does grep in the other
>>> modules.dep files for several other versions.
>>>
>>> In fact, no .config I have mentions it. At my age the hair is thinning
>>> quickly enough.
>>>
>>> So, Next please?  libata is missing, and so is sata_nv in spite of that
>>
>>> being enabled:
>> It's missing as a loadable module, but that's OK since it's builtin.
>>
>>> gene@coyote:~/src/linux-3.2.40$ grep SATA_NV .config
>>> CONFIG_SATA_NV=y
>>>
>>> But I see thats builtin, but it didn't help.
>>
>> Your .config has (I believe)
>> CONFIG_ATA=y
>> and that is what builds libata.
>>
>> Any other clues?
> 
> Not that I see in the build trace. grepping:
> gene@coyote:~/src/linux-3.2.40$ grep CONFIG_ATA .config
> CONFIG_ATALK=m
> # CONFIG_ATA_OVER_ETH is not set
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_VERBOSE_ERROR=y
> CONFIG_ATA_ACPI=y
> CONFIG_ATA_SFF=y
> CONFIG_ATA_BMDMA=y
> # CONFIG_ATA_PIIX is not set
> CONFIG_ATA_GENERIC=m
> 
> And it seems to be building libata:
> gene@coyote:~/src/linux-3.2.40/drivers/ata$ ls -l|grep libata|grep .o
> -rw-r--r-- 1 root root  10236 2014-02-10 18:19 libata-acpi.o
> -rw-rw-r-- 1 gene gene 175870 2013-03-05 22:24 libata-core.c
> -rw-r--r-- 1 root root  89616 2014-02-10 18:19 libata-core.o
> -rw-r--r-- 1 root root  35904 2014-02-10 18:19 libata-eh.o
> -rw-r--r-- 1 root root 222732 2014-02-10 18:19 libata.o
> -rw-r--r-- 1 root root  12072 2014-02-10 18:19 libata-pmp.o
> -rw-r--r-- 1 root root  37156 2014-02-10 18:19 libata-scsi.o
> -rw-r--r-- 1 root root  40996 2014-02-10 18:19 libata-sff.o
> -rw-rw-r-- 1 gene gene  19559 2013-03-05 22:24 libata-transport.c
> -rw-rw-r-- 1 gene gene    536 2013-03-05 22:24 libata-transport.h
> -rw-r--r-- 1 root root  11772 2014-02-10 18:19 libata-transport.o
> 
> But libata.ko is not making it into the initrd, nor the modules.dep for 
> 3.2.40.
> 
> I been playing 20 monkeys changing one ata related thing at a time & doing 
> a sudo time -p ./makeit to check, not much use rebooting to check until I 
> see it.
> 
> I'll go gedit .config & change CONFIG_ATA to = m & try one more time.
> 
> Got it, test reboot time.  Made it 2 lines farther, "switching to clock 
> source TSC" then fell through to the busybox prompt with all inputs dead.
> 
> Sigh.
> 
> .config attached if you've got time.

You have ext[234] filesystems builtin. I suppose the rootfs is one of those?

Your .config file also has the ATA drivers as =m (loadable modules), but
I guess that you also tested with those drivers =y (builtin).

I don't see what the problem is.
You may need to try taking a photo of the failed boot and sending it to
the mailing list (and me) again, even though that has not worked for you
some time in the past.


-- 
~Randy

Re: make oldfonfig broken.

[Gene Heskett]

On Tuesday 11 February 2014, Randy Dunlap wrote:
>
>You have ext[234] filesystems builtin. I suppose the rootfs is one of
>those?

Yes, its all ext2-3-4 here (except swap of course)

>Your .config file also has the ATA drivers as =m (loadable modules), but
>I guess that you also tested with those drivers =y (builtin).

Yes, both ways.
>
>I don't see what the problem is.
>You may need to try taking a photo of the failed boot and sending it to
>the mailing list (and me) again, even though that has not worked for you
>some time in the past.

I'll try it with the ext2-3-4 as modules.  But the last error was 2 lines 
farther, stalling till the BusyBox timeout after echoing the change to TSC 
clock to the low res screen.  Whatever that is.

We'll keep plodding along.

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

NOTICE: Will pay 100 USD for an HP-4815A defective but
complete probe assembly.

Re: make oldfonfig broken.

[Gene Heskett]

On Tuesday 11 February 2014, Randy Dunlap wrote:
>On 02/10/2014 04:13 PM, Gene Heskett wrote:
>> On Monday 10 February 2014, Randy Dunlap wrote:
>>> On 02/10/2014 12:21 PM, Gene Heskett wrote:
>>>> On Monday 10 February 2014, Randy Dunlap wrote:
>>>>> On 02/09/2014 08:32 PM, Gene Heskett wrote:
>>>>> AUTOSELECT driver feature Better!  ugh.
>>>> 
>>>> Spit.  I presume geneology discussions are off topic. :)
>>>> 
>>>>> Good luck. Let me know if you need more guidance.
>>>> 
>>>> Hat in hand, I figured I had better get the first one that fails,
>>>> 3.2.40, to work before I carried that fwd to a more current kernel,
>>>> but 5 or 6 builds & boot failure later I am stumped.
>>>> 
>>>> The boot gets to top_init, reports the / drive is unavailable and it
>>>> cannot load /lib/modules/3.2.40/modules.dep, which does exist.
>>>> 
>>>> Stops, times out in about a minute and falls thru to the busybox
>>>> shell, and of course my keyboard and mouse are wireless to usb, so
>>>> neither work, reset button tap time.
>>>> 
>>>> The only reason I can deduce is that because the drive isn't mounted,
>>>> something is still missing, either in the vmlinuz file or in the
>>>> initrd file.
>>>> 
>>>> This most working 3.12.9 bootup shows:
>>>> 
>>>> gene@coyote:~/src/linux-3.2.40$ lsmod |grep sata
>>>> sata_nv                16890  12
>>>> libata                146855  2 pata_amd,sata_nv
>>>> 
>>>> And I'm pretty sure all that is in the initrd.
>>>> 
>>>> Except according to grep, none of that is in
>>>> /lib/modules/3.2.40/modules.dep
>>>> 
>>>> And I cannot find anyplace in a make xconfig that mentions libata.
>>>> So obviously my .config is still fubared. It does grep in the other
>>>> modules.dep files for several other versions.
>>>> 
>>>> In fact, no .config I have mentions it. At my age the hair is
>>>> thinning quickly enough.
>>>> 
>>>> So, Next please?  libata is missing, and so is sata_nv in spite of
>>>> that
>>> 
>>>> being enabled:
>>> It's missing as a loadable module, but that's OK since it's builtin.
>>> 
>>>> gene@coyote:~/src/linux-3.2.40$ grep SATA_NV .config
>>>> CONFIG_SATA_NV=y
>>>> 
>>>> But I see thats builtin, but it didn't help.
>>> 
>>> Your .config has (I believe)
>>> CONFIG_ATA=y
>>> and that is what builds libata.
>>> 
>>> Any other clues?
>> 
>> Not that I see in the build trace. grepping:
>> gene@coyote:~/src/linux-3.2.40$ grep CONFIG_ATA .config
>> CONFIG_ATALK=m
>> # CONFIG_ATA_OVER_ETH is not set
>> CONFIG_ATA=y
>> # CONFIG_ATA_NONSTANDARD is not set
>> CONFIG_ATA_VERBOSE_ERROR=y
>> CONFIG_ATA_ACPI=y
>> CONFIG_ATA_SFF=y
>> CONFIG_ATA_BMDMA=y
>> # CONFIG_ATA_PIIX is not set
>> CONFIG_ATA_GENERIC=m
>> 
>> And it seems to be building libata:
>> gene@coyote:~/src/linux-3.2.40/drivers/ata$ ls -l|grep libata|grep .o
>> -rw-r--r-- 1 root root  10236 2014-02-10 18:19 libata-acpi.o
>> -rw-rw-r-- 1 gene gene 175870 2013-03-05 22:24 libata-core.c
>> -rw-r--r-- 1 root root  89616 2014-02-10 18:19 libata-core.o
>> -rw-r--r-- 1 root root  35904 2014-02-10 18:19 libata-eh.o
>> -rw-r--r-- 1 root root 222732 2014-02-10 18:19 libata.o
>> -rw-r--r-- 1 root root  12072 2014-02-10 18:19 libata-pmp.o
>> -rw-r--r-- 1 root root  37156 2014-02-10 18:19 libata-scsi.o
>> -rw-r--r-- 1 root root  40996 2014-02-10 18:19 libata-sff.o
>> -rw-rw-r-- 1 gene gene  19559 2013-03-05 22:24 libata-transport.c
>> -rw-rw-r-- 1 gene gene    536 2013-03-05 22:24 libata-transport.h
>> -rw-r--r-- 1 root root  11772 2014-02-10 18:19 libata-transport.o
>> 
>> But libata.ko is not making it into the initrd, nor the modules.dep for
>> 3.2.40.
>> 
>> I been playing 20 monkeys changing one ata related thing at a time &
>> doing a sudo time -p ./makeit to check, not much use rebooting to
>> check until I see it.
>> 
>> I'll go gedit .config & change CONFIG_ATA to = m & try one more time.
>> 
>> Got it, test reboot time.  Made it 2 lines farther, "switching to clock
>> source TSC" then fell through to the busybox prompt with all inputs
>> dead.
>> 
>> Sigh.
>> 
>> .config attached if you've got time.
>
>You have ext[234] filesystems builtin. I suppose the rootfs is one of
>those?
>
>Your .config file also has the ATA drivers as =m (loadable modules), but
>I guess that you also tested with those drivers =y (builtin).
>
>I don't see what the problem is.
>You may need to try taking a photo of the failed boot and sending it to
>the mailing list (and me) again, even though that has not worked for you
>some time in the past.

I thought after sending the last msg, that I would look at the 
i386_defconfig to see if I could get a clue about this TSC clock its 
mewling about.

It doesn't even exist in either defconfig. ?????

This is 3.12.9 ATM, 3.12.6 will also boot, but I am going to pull that 
defconfig and see it it will still boot. Just for S&G of course.

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

NOTICE: Will pay 100 USD for an HP-4815A defective but
complete probe assembly.

Re: [PATCH 24/28] Remove DEPRECATED

[Guenter Roeck]

On 02/09/2014 01:38 PM, Richard Weinberger wrote:
> Am 09.02.2014 22:35, schrieb Guenter Roeck:
>> I could understand if you would replace DEPRECATED with BROKEN,
>> but causing a potentially large number of broken builds and
>> then leave it to others to clean up the resulting mess doesn't
>> make any sense to me and should, in my opinion, be rejected.
>
> Currently the mess is hidden by bad Kconfig dependencies.
> We have to face it. :)
>

You can make the breakage obvious by using BROKEN instead
of DEPRECATED. Then it can be fixed.

Otherwise you could, using your logic, remove all BROKEN
dependencies as well (all 90 or so of them). That symbol,
after all, is just as orphan as DEPRECATED.

The point here is to not unnecessarily introduce build problems.
There are people out there trying to ensure that no new build
breakages are introduced. By making X configurations
non-buildable, all you accomplish is to ensure that no one will
be able to discover real new build problems anymore, because
those new problems will all disappear in the build breakage
noise you introduced.

So, in practice, all you accomplish is to make the kernel
less maintainable. If that is your goal, mission accomplished.
Otherwise I would kindly ask you to reconsider.

Note that I would not mind some big cleanup effort to simply
remove all code marked as BROKEN, and I would be more than
happy to assist in such an effort.

However, breaking builds on purpose in the hope that someone
would magically show up and fix it is just plain wrong.

Note that I do not refer to a specific platform.

Guenter

[PATCH 25/28] Remove MACH_SMDKV310

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 sound/soc/samsung/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 7ea576c..33fd372 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -145,7 +145,7 @@ config SND_SOC_SAMSUNG_RX1950_UDA1380
 
 config SND_SOC_SAMSUNG_SMDK_WM9713
 	tristate "SoC AC97 Audio support for SMDK with WM9713"
-	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310)
+	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
 	select SND_SOC_WM9713
 	select SND_SAMSUNG_AC97
 	help
-- 
1.8.4.2

[PATCH 25/28] Remove MACH_SMDKV310

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 sound/soc/samsung/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 7ea576c..33fd372 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -145,7 +145,7 @@ config SND_SOC_SAMSUNG_RX1950_UDA1380
 
 config SND_SOC_SAMSUNG_SMDK_WM9713
 	tristate "SoC AC97 Audio support for SMDK with WM9713"
-	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310)
+	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
 	select SND_SOC_WM9713
 	select SND_SAMSUNG_AC97
 	help
-- 
1.8.4.2

[PATCH 26/28] Remove LOCAL_TIMERS

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-shmobile/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3386406..c055388 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -8,7 +8,6 @@ config ARCH_SHMOBILE_MULTI
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select ARM_GIC
 	select MIGHT_HAVE_CACHE_L2X0
-- 
1.8.4.2

[PATCH 26/28] Remove LOCAL_TIMERS

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-shmobile/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3386406..c055388 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -8,7 +8,6 @@ config ARCH_SHMOBILE_MULTI
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select ARM_GIC
 	select MIGHT_HAVE_CACHE_L2X0
-- 
1.8.4.2

[PATCH 26/28] Remove LOCAL_TIMERS

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-shmobile/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3386406..c055388 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -8,7 +8,6 @@ config ARCH_SHMOBILE_MULTI
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select ARM_GIC
 	select MIGHT_HAVE_CACHE_L2X0
-- 
1.8.4.2

Re: [PATCH 26/28] Remove LOCAL_TIMERS

[Paul Bolle]

On Sun, 2014-02-09 at 19:48 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.

Orphaned a year ago, see commit 060f3043e5e ("ARM: smp: Remove local
timer API"). But this one got added after that, in the same relase
cycle.

> Signed-off-by: Richard Weinberger <richard@nod.at>

This gets my
    Acked-by: Paul Bolle <pebolle@tiscali.nl>

as it's correct (we're dropping a nop) but I'd appreciate it if you'd
resend with the above info added. That would easy review by others too.


Paul Bolle

>  arch/arm/mach-shmobile/Kconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
> index 3386406..c055388 100644
> --- a/arch/arm/mach-shmobile/Kconfig
> +++ b/arch/arm/mach-shmobile/Kconfig
> @@ -8,7 +8,6 @@ config ARCH_SHMOBILE_MULTI
>  	select CPU_V7
>  	select GENERIC_CLOCKEVENTS
>  	select HAVE_ARM_SCU if SMP
> -	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select HAVE_SMP
>  	select ARM_GIC
>  	select MIGHT_HAVE_CACHE_L2X0

[PATCH 26/28] Remove LOCAL_TIMERS

[Paul Bolle]

On Sun, 2014-02-09 at 19:48 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.

Orphaned a year ago, see commit 060f3043e5e ("ARM: smp: Remove local
timer API"). But this one got added after that, in the same relase
cycle.

> Signed-off-by: Richard Weinberger <richard@nod.at>

This gets my
    Acked-by: Paul Bolle <pebolle@tiscali.nl>

as it's correct (we're dropping a nop) but I'd appreciate it if you'd
resend with the above info added. That would easy review by others too.


Paul Bolle

>  arch/arm/mach-shmobile/Kconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
> index 3386406..c055388 100644
> --- a/arch/arm/mach-shmobile/Kconfig
> +++ b/arch/arm/mach-shmobile/Kconfig
> @@ -8,7 +8,6 @@ config ARCH_SHMOBILE_MULTI
>  	select CPU_V7
>  	select GENERIC_CLOCKEVENTS
>  	select HAVE_ARM_SCU if SMP
> -	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select HAVE_SMP
>  	select ARM_GIC
>  	select MIGHT_HAVE_CACHE_L2X0

Re: [PATCH 26/28] Remove LOCAL_TIMERS

[Paul Bolle]

On Sun, 2014-02-09 at 19:48 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.

Orphaned a year ago, see commit 060f3043e5e ("ARM: smp: Remove local
timer API"). But this one got added after that, in the same relase
cycle.

> Signed-off-by: Richard Weinberger <richard@nod.at>

This gets my
    Acked-by: Paul Bolle <pebolle@tiscali.nl>

as it's correct (we're dropping a nop) but I'd appreciate it if you'd
resend with the above info added. That would easy review by others too.


Paul Bolle

>  arch/arm/mach-shmobile/Kconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
> index 3386406..c055388 100644
> --- a/arch/arm/mach-shmobile/Kconfig
> +++ b/arch/arm/mach-shmobile/Kconfig
> @@ -8,7 +8,6 @@ config ARCH_SHMOBILE_MULTI
>  	select CPU_V7
>  	select GENERIC_CLOCKEVENTS
>  	select HAVE_ARM_SCU if SMP
> -	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select HAVE_SMP
>  	select ARM_GIC
>  	select MIGHT_HAVE_CACHE_L2X0

[PATCH 27/28] Remove ARC_HAS_COH_RTSC

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arc/plat-arcfpga/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig
index 295cefe..33058aa 100644
--- a/arch/arc/plat-arcfpga/Kconfig
+++ b/arch/arc/plat-arcfpga/Kconfig
@@ -33,7 +33,6 @@ config ISS_SMP_EXTN
 	bool "ARC SMP Extensions (ISS Models only)"
 	default n
 	depends on SMP
-	select ARC_HAS_COH_RTSC
 	help
 	  SMP Extensions to ARC700, in a "simulation only" Model, supported in
 	  ARC ISS (Instruction Set Simulator).
-- 
1.8.4.2

Re: [PATCH 27/28] Remove ARC_HAS_COH_RTSC

[Paul Bolle]

On Sun, 2014-02-09 at 19:48 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

Acked-by: Paul Bolle <pebolle@tiscali.nl>

This Kconfig symbol was removed in commit 7d087a54aed ("ARC: [SMP]
Disallow RTSC"), merged in v3.13.

> ---
>  arch/arc/plat-arcfpga/Kconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig
> index 295cefe..33058aa 100644
> --- a/arch/arc/plat-arcfpga/Kconfig
> +++ b/arch/arc/plat-arcfpga/Kconfig
> @@ -33,7 +33,6 @@ config ISS_SMP_EXTN
>  	bool "ARC SMP Extensions (ISS Models only)"
>  	default n
>  	depends on SMP
> -	select ARC_HAS_COH_RTSC
>  	help
>  	  SMP Extensions to ARC700, in a "simulation only" Model, supported in
>  	  ARC ISS (Instruction Set Simulator).

Re: [PATCH 27/28] Remove ARC_HAS_COH_RTSC

[Vineet Gupta]

Hi Paul,

On Monday 10 February 2014 01:16 AM, Paul Bolle wrote:
>> The symbol is an orphan, get rid of it.
>> > 
>> > Signed-off-by: Richard Weinberger <richard@nod.at>
> Acked-by: Paul Bolle <pebolle@tiscali.nl>
> 
> This Kconfig symbol was removed in commit 7d087a54aed ("ARC: [SMP]
> Disallow RTSC"), merged in v3.13.
> 

I've applied you ACK, with the fixed commit-id 7d0857a54aed

Thx,
-Vineet

Re: [PATCH 27/28] Remove ARC_HAS_COH_RTSC

[Paul Bolle]

On Mon, 2014-02-10 at 10:05 +0530, Vineet Gupta wrote:
> On Monday 10 February 2014 01:16 AM, Paul Bolle wrote:
> > This Kconfig symbol was removed in commit 7d087a54aed ("ARC: [SMP]
> > Disallow RTSC"), merged in v3.13.
>
> I've applied you ACK, with the fixed commit-id 7d0857a54aed

Manually trimming 40 hex digits down to 12 digits. What can go wrong?

Thanks!


Paul Bolle

Re: [PATCH 27/28] Remove ARC_HAS_COH_RTSC

[Vineet Gupta]

On Monday 10 February 2014 07:18 PM, Paul Bolle wrote:
> On Mon, 2014-02-10 at 10:05 +0530, Vineet Gupta wrote:
>> On Monday 10 February 2014 01:16 AM, Paul Bolle wrote:
>>> This Kconfig symbol was removed in commit 7d087a54aed ("ARC: [SMP]
>>> Disallow RTSC"), merged in v3.13.
>> I've applied you ACK, with the fixed commit-id 7d0857a54aed
> Manually trimming 40 hex digits down to 12 digits. What can go wrong?

Yes pretty weird - one intermediate char got eaten somehow.

Re: [PATCH 27/28] Remove ARC_HAS_COH_RTSC

[Paul Bolle]

On Mon, 2014-02-10 at 14:06 +0000, Vineet Gupta wrote:
> > Manually trimming 40 hex digits down to 12 digits. What can go wrong?
> 
> Yes pretty weird - one intermediate char got eaten somehow.

I know exactly what happened.

See, I can't reliably count to twelve. But I can chop of (say) four
digits at a time by inserting a space and throw away the last 28 digits.
I then will have three set of four digits. And, being an editing genius,
merging these three sets will, every now and then, give me a string of
eleven digits!

Perhaps I should write a vim macro to do all this for me.


Paul Bolle

Re: [PATCH 27/28] Remove ARC_HAS_COH_RTSC

[Vineet Gupta]

Hi Richard,

On Monday 10 February 2014 12:18 AM, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
>
> Signed-off-by: Richard Weinberger <richard@nod.at>

Thanks for the cleanup. Applied to ARC for-next.

-Vineet

> ---
>  arch/arc/plat-arcfpga/Kconfig | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig
> index 295cefe..33058aa 100644
> --- a/arch/arc/plat-arcfpga/Kconfig
> +++ b/arch/arc/plat-arcfpga/Kconfig
> @@ -33,7 +33,6 @@ config ISS_SMP_EXTN
>  	bool "ARC SMP Extensions (ISS Models only)"
>  	default n
>  	depends on SMP
> -	select ARC_HAS_COH_RTSC
>  	help
>  	  SMP Extensions to ARC700, in a "simulation only" Model, supported in
>  	  ARC ISS (Instruction Set Simulator).

[PATCH 28/28] Remove LOCAL_TIMERS

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-omap2/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 653b489..2817f1f 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -54,7 +54,6 @@ config SOC_OMAP5
 	select ARM_GIC
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP
-- 
1.8.4.2

[PATCH 28/28] Remove LOCAL_TIMERS

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-omap2/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 653b489..2817f1f 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -54,7 +54,6 @@ config SOC_OMAP5
 	select ARM_GIC
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP
-- 
1.8.4.2

[PATCH 28/28] Remove LOCAL_TIMERS

[Richard Weinberger]

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
---
 arch/arm/mach-omap2/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 653b489..2817f1f 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -54,7 +54,6 @@ config SOC_OMAP5
 	select ARM_GIC
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP
-- 
1.8.4.2

Re: [PATCH 28/28] Remove LOCAL_TIMERS

[Paul Bolle]

On Sun, 2014-02-09 at 19:48 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

Merge with 26/28? Anyhow, my comments are basically identical to those
on that patch. So:
    Acked-by: Paul Bolle <pebolle@tiscali.nl>


Paul Bolle 

>  arch/arm/mach-omap2/Kconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 653b489..2817f1f 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -54,7 +54,6 @@ config SOC_OMAP5
>  	select ARM_GIC
>  	select CPU_V7
>  	select HAVE_ARM_SCU if SMP
> -	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select HAVE_SMP
>  	select HAVE_ARM_ARCH_TIMER
>  	select ARM_ERRATA_798181 if SMP

[PATCH 28/28] Remove LOCAL_TIMERS

[Paul Bolle]

On Sun, 2014-02-09 at 19:48 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

Merge with 26/28? Anyhow, my comments are basically identical to those
on that patch. So:
    Acked-by: Paul Bolle <pebolle@tiscali.nl>


Paul Bolle 

>  arch/arm/mach-omap2/Kconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 653b489..2817f1f 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -54,7 +54,6 @@ config SOC_OMAP5
>  	select ARM_GIC
>  	select CPU_V7
>  	select HAVE_ARM_SCU if SMP
> -	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select HAVE_SMP
>  	select HAVE_ARM_ARCH_TIMER
>  	select ARM_ERRATA_798181 if SMP

Re: [PATCH 28/28] Remove LOCAL_TIMERS

[Paul Bolle]

On Sun, 2014-02-09 at 19:48 +0100, Richard Weinberger wrote:
> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

Merge with 26/28? Anyhow, my comments are basically identical to those
on that patch. So:
    Acked-by: Paul Bolle <pebolle@tiscali.nl>


Paul Bolle 

>  arch/arm/mach-omap2/Kconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 653b489..2817f1f 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -54,7 +54,6 @@ config SOC_OMAP5
>  	select ARM_GIC
>  	select CPU_V7
>  	select HAVE_ARM_SCU if SMP
> -	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select HAVE_SMP
>  	select HAVE_ARM_ARCH_TIMER
>  	select ARM_ERRATA_798181 if SMP

Re: Remove orphan kconfig symbols

[Paul Bolle]

On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote:
> [PATCH 14/28] Remove MACH_SMDKC210

Did this one make it to lkml? 

Anyhow, you should also check MACH_SMDKV310. And then have a look at
https://lkml.org/lkml/2013/7/14/27 , in which Mark Brown (added in CC)
and I spent some time not understanding each other (at least, that was
my impression).


Paul Bolle

Re: Remove orphan kconfig symbols

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 497 bytes --]

On Mon, Feb 10, 2014 at 01:58:40AM +0100, Paul Bolle wrote:

> Anyhow, you should also check MACH_SMDKV310. And then have a look at
> https://lkml.org/lkml/2013/7/14/27 , in which Mark Brown (added in CC)
> and I spent some time not understanding each other (at least, that was
> my impression).

I understand what you were doing, you just haven't thought about what
what you're doing - why the code is that way and what actually needs to
be done to it?  You didn't reply to my last mail there...

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: Remove orphan kconfig symbols

[Paul Bolle]

On Mon, 2014-02-10 at 11:00 +0000, Mark Brown wrote:
> You didn't reply to my last mail there...

Because I feared we'd ended up in a loop, where we both repeat our
statements. I seem to remember getting in such a loop with you,
regarding another patch, and it wasn't productive. But I'll start again
in the thread regarding Richard's patch 14/28 and see if things work out
better this time.


Paul Bolle

Re: [PATCH 18/28] Remove MN10300_PROC_MN2WS0038

[David Howells]

Richard Weinberger <richard@nod.at> wrote:

> The symbol is an orphan, get rid of it.
> 
> Signed-off-by: Richard Weinberger <richard@nod.at>

Acked-by: David Howells <dhowells@redhat.com>

Re: [PATCH 18/28] Remove MN10300_PROC_MN2WS0038

[Paul Bolle]

On Mon, 2014-02-10 at 14:58 +0000, David Howells wrote:
> Richard Weinberger <richard@nod.at> wrote:
> 
> > The symbol is an orphan, get rid of it.
> > 
> > Signed-off-by: Richard Weinberger <richard@nod.at>
> 
> Acked-by: David Howells <dhowells@redhat.com>

I don't think this oneliner is queued somewhere. David, you're listed as
one of the mn10300 maintainers: could you perhaps queue this patch?


Paul Bolle

Re: [PATCH 18/28] Remove MN10300_PROC_MN2WS0038

[Paul Bolle]

David, Koichi,

On Tue, 2014-04-15 at 11:13 +0200, Paul Bolle wrote:
> On Mon, 2014-02-10 at 14:58 +0000, David Howells wrote:
> > Richard Weinberger <richard@nod.at> wrote:
> > 
> > > The symbol is an orphan, get rid of it.
> > > 
> > > Signed-off-by: Richard Weinberger <richard@nod.at>
> > 
> > Acked-by: David Howells <dhowells@redhat.com>
> 
> I don't think this oneliner is queued somewhere. David, you're listed as
> one of the mn10300 maintainers: could you perhaps queue this patch?

This one is still not part of v3.16-rc1 nor part of linux-next. Is it
actually queued somewhere?


Paul Bolle

Re: [PATCH 18/28] Remove MN10300_PROC_MN2WS0038

[Paul Bolle]

Hi Richard,

On Wed, 2014-06-18 at 11:42 +0200, Paul Bolle wrote:
> On Tue, 2014-04-15 at 11:13 +0200, Paul Bolle wrote:
> > On Mon, 2014-02-10 at 14:58 +0000, David Howells wrote:
> > > Richard Weinberger <richard@nod.at> wrote:
> > > 
> > > > The symbol is an orphan, get rid of it.
> > > > 
> > > > Signed-off-by: Richard Weinberger <richard@nod.at>
> > > 
> > > Acked-by: David Howells <dhowells@redhat.com>
> > 
> > I don't think this oneliner is queued somewhere. David, you're listed as
> > one of the mn10300 maintainers: could you perhaps queue this patch?
> 
> This one is still not part of v3.16-rc1 nor part of linux-next. Is it
> actually queued somewhere?

No surprises here: not part of v3.17-rc3 nor next-20140904. Do you have
suggestions for an alternative route?


Paul Bolle

[PATCH] [TRIVIAL] Remove MN10300_PROC_MN2WS0038

[Paul Bolle]

On Fri, 2014-09-05 at 11:45 +0200, Paul Bolle wrote:
> No surprises here: not part of v3.17-rc3 nor next-20140904. Do you have
> suggestions for an alternative route?

You know what: let's try trivial! And I've added my Signed-off-by in an
obvious attempt to inflate the count of commits with my name attached.

Jiri, could you please put this in trivial queue?

Thanks,


Paul Bolle
------->8--------
From: Richard Weinberger <richard@nod.at>

The symbol is an orphan, get rid of it.

Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
 arch/mn10300/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index a648de1b1096..4434b54e1d87 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -181,7 +181,7 @@ endmenu
 config SMP
 	bool "Symmetric multi-processing support"
 	default y
-	depends on MN10300_PROC_MN2WS0038 || MN10300_PROC_MN2WS0050
+	depends on MN10300_PROC_MN2WS0050
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
-- 
1.9.3