[PATCH] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[PATCH] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10
development cycle. It was removed in a merge commit before v3.10. A few
references to it were left in the tree, probably because they didn't
generate merge conflicts. Whatever it was, they're useless now and can
safely be removed.

Reported-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
Untested.

 arch/arm/mach-spear/Kconfig | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index ac1710e6..1595776 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig PLAT_SPEAR
 	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
-	default PLAT_SPEAR_SINGLE
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO
@@ -15,7 +14,7 @@ if PLAT_SPEAR
 
 config ARCH_SPEAR13XX
 	bool "ST SPEAr13xx"
-	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_CPUFREQ
 	select ARM_GIC
 	select CPU_V7
@@ -47,7 +46,7 @@ endif #ARCH_SPEAR13XX
 
 config ARCH_SPEAR3XX
 	bool "ST SPEAr3xx"
-	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V5
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
 	select CPU_ARM926T
@@ -80,7 +79,7 @@ endif
 
 config ARCH_SPEAR6XX
 	bool "ST SPEAr6XX"
-	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V5
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
 	select CPU_ARM926T
@@ -95,7 +94,6 @@ config MACH_SPEAR600
 	  Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig"
 
 config ARCH_SPEAR_AUTO
-	def_bool PLAT_SPEAR_SINGLE
 	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
 	select ARCH_SPEAR3XX
 
-- 
1.8.5.3

[PATCH] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10
development cycle. It was removed in a merge commit before v3.10. A few
references to it were left in the tree, probably because they didn't
generate merge conflicts. Whatever it was, they're useless now and can
safely be removed.

Reported-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
Untested.

 arch/arm/mach-spear/Kconfig | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index ac1710e6..1595776 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig PLAT_SPEAR
 	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
-	default PLAT_SPEAR_SINGLE
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO
@@ -15,7 +14,7 @@ if PLAT_SPEAR
 
 config ARCH_SPEAR13XX
 	bool "ST SPEAr13xx"
-	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_CPUFREQ
 	select ARM_GIC
 	select CPU_V7
@@ -47,7 +46,7 @@ endif #ARCH_SPEAR13XX
 
 config ARCH_SPEAR3XX
 	bool "ST SPEAr3xx"
-	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V5
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
 	select CPU_ARM926T
@@ -80,7 +79,7 @@ endif
 
 config ARCH_SPEAR6XX
 	bool "ST SPEAr6XX"
-	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V5
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
 	select CPU_ARM926T
@@ -95,7 +94,6 @@ config MACH_SPEAR600
 	  Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig"
 
 config ARCH_SPEAR_AUTO
-	def_bool PLAT_SPEAR_SINGLE
 	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
 	select ARCH_SPEAR3XX
 
-- 
1.8.5.3

Re: [PATCH] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

I got a bounce for Shiraz' address. Has Shiraz left ST?


Paul Bolle

[PATCH] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

I got a bounce for Shiraz' address. Has Shiraz left ST?


Paul Bolle

[PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10
development cycle. It was removed in a merge commit before v3.10. A few
references to it were left in the tree, probably because they didn't
generate merge conflicts. Whatever it was, they're useless now and can
safely be removed.

Reported-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
0) First version was broken: it left config ARCH_SPEAR_AUTO without its
bool type. This version is done on top of v3.15-rc1.

1) Still untested. 

 arch/arm/mach-spear/Kconfig | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 0786249b2832..bc8a11c53377 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig PLAT_SPEAR
 	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
-	default PLAT_SPEAR_SINGLE
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO
@@ -13,7 +12,7 @@ if PLAT_SPEAR
 
 config ARCH_SPEAR13XX
 	bool "ST SPEAr13xx"
-	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_CPUFREQ
 	select ARM_GIC
 	select GPIO_SPEAR_SPICS
@@ -41,7 +40,7 @@ endif #ARCH_SPEAR13XX
 
 config ARCH_SPEAR3XX
 	bool "ST SPEAr3xx"
-	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V5
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
 	select PINCTRL
@@ -72,7 +71,7 @@ endif
 
 config ARCH_SPEAR6XX
 	bool "ST SPEAr6XX"
-	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V5
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
 	help
@@ -85,7 +84,7 @@ config MACH_SPEAR600
 	  Supports ST SPEAr600 boards configured via the device-tree
 
 config ARCH_SPEAR_AUTO
-	def_bool PLAT_SPEAR_SINGLE
+	bool
 	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
 	select ARCH_SPEAR3XX
 
-- 
1.9.0

[PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10
development cycle. It was removed in a merge commit before v3.10. A few
references to it were left in the tree, probably because they didn't
generate merge conflicts. Whatever it was, they're useless now and can
safely be removed.

Reported-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
0) First version was broken: it left config ARCH_SPEAR_AUTO without its
bool type. This version is done on top of v3.15-rc1.

1) Still untested. 

 arch/arm/mach-spear/Kconfig | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 0786249b2832..bc8a11c53377 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig PLAT_SPEAR
 	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
-	default PLAT_SPEAR_SINGLE
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO
@@ -13,7 +12,7 @@ if PLAT_SPEAR
 
 config ARCH_SPEAR13XX
 	bool "ST SPEAr13xx"
-	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_CPUFREQ
 	select ARM_GIC
 	select GPIO_SPEAR_SPICS
@@ -41,7 +40,7 @@ endif #ARCH_SPEAR13XX
 
 config ARCH_SPEAR3XX
 	bool "ST SPEAr3xx"
-	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V5
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
 	select PINCTRL
@@ -72,7 +71,7 @@ endif
 
 config ARCH_SPEAR6XX
 	bool "ST SPEAr6XX"
-	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V5
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
 	help
@@ -85,7 +84,7 @@ config MACH_SPEAR600
 	  Supports ST SPEAr600 boards configured via the device-tree
 
 config ARCH_SPEAR_AUTO
-	def_bool PLAT_SPEAR_SINGLE
+	bool
 	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
 	select ARCH_SPEAR3XX
 
-- 
1.9.0

Re: [PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Rajeev kumar]

On 4/15/2014 1:56 PM, Paul Bolle wrote:
> The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10
> development cycle. It was removed in a merge commit before v3.10. A few
> references to it were left in the tree, probably because they didn't
> generate merge conflicts. Whatever it was, they're useless now and can
> safely be removed.
>
> Reported-by: Martin Walch <walch.martin@web.de>
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> ---
> 0) First version was broken: it left config ARCH_SPEAR_AUTO without its
> bool type. This version is done on top of v3.15-rc1.
>
> 1) Still untested.
>
>   arch/arm/mach-spear/Kconfig | 9 ++++-----
>   1 file changed, 4 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
> index 0786249b2832..bc8a11c53377 100644
> --- a/arch/arm/mach-spear/Kconfig
> +++ b/arch/arm/mach-spear/Kconfig
> @@ -4,7 +4,6 @@
>
>   menuconfig PLAT_SPEAR
>   	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
> -	default PLAT_SPEAR_SINGLE
>   	select ARCH_REQUIRE_GPIOLIB
>   	select ARM_AMBA
>   	select CLKSRC_MMIO
> @@ -13,7 +12,7 @@ if PLAT_SPEAR
>
>   config ARCH_SPEAR13XX
>   	bool "ST SPEAr13xx"
> -	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
> +	depends on ARCH_MULTI_V7
>   	select ARCH_HAS_CPUFREQ
>   	select ARM_GIC
>   	select GPIO_SPEAR_SPICS
> @@ -41,7 +40,7 @@ endif #ARCH_SPEAR13XX
>
>   config ARCH_SPEAR3XX
>   	bool "ST SPEAr3xx"
> -	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
> +	depends on ARCH_MULTI_V5
>   	depends on !ARCH_SPEAR13XX
>   	select ARM_VIC
>   	select PINCTRL
> @@ -72,7 +71,7 @@ endif
>
>   config ARCH_SPEAR6XX
>   	bool "ST SPEAr6XX"
> -	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
> +	depends on ARCH_MULTI_V5
>   	depends on !ARCH_SPEAR13XX
>   	select ARM_VIC
>   	help
> @@ -85,7 +84,7 @@ config MACH_SPEAR600
>   	  Supports ST SPEAr600 boards configured via the device-tree
>
>   config ARCH_SPEAR_AUTO
> -	def_bool PLAT_SPEAR_SINGLE
> +	bool
>   	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
>   	select ARCH_SPEAR3XX
>
>


Reviewed-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>

[PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Rajeev kumar]

On 4/15/2014 1:56 PM, Paul Bolle wrote:
> The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10
> development cycle. It was removed in a merge commit before v3.10. A few
> references to it were left in the tree, probably because they didn't
> generate merge conflicts. Whatever it was, they're useless now and can
> safely be removed.
>
> Reported-by: Martin Walch <walch.martin@web.de>
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> ---
> 0) First version was broken: it left config ARCH_SPEAR_AUTO without its
> bool type. This version is done on top of v3.15-rc1.
>
> 1) Still untested.
>
>   arch/arm/mach-spear/Kconfig | 9 ++++-----
>   1 file changed, 4 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
> index 0786249b2832..bc8a11c53377 100644
> --- a/arch/arm/mach-spear/Kconfig
> +++ b/arch/arm/mach-spear/Kconfig
> @@ -4,7 +4,6 @@
>
>   menuconfig PLAT_SPEAR
>   	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
> -	default PLAT_SPEAR_SINGLE
>   	select ARCH_REQUIRE_GPIOLIB
>   	select ARM_AMBA
>   	select CLKSRC_MMIO
> @@ -13,7 +12,7 @@ if PLAT_SPEAR
>
>   config ARCH_SPEAR13XX
>   	bool "ST SPEAr13xx"
> -	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
> +	depends on ARCH_MULTI_V7
>   	select ARCH_HAS_CPUFREQ
>   	select ARM_GIC
>   	select GPIO_SPEAR_SPICS
> @@ -41,7 +40,7 @@ endif #ARCH_SPEAR13XX
>
>   config ARCH_SPEAR3XX
>   	bool "ST SPEAr3xx"
> -	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
> +	depends on ARCH_MULTI_V5
>   	depends on !ARCH_SPEAR13XX
>   	select ARM_VIC
>   	select PINCTRL
> @@ -72,7 +71,7 @@ endif
>
>   config ARCH_SPEAR6XX
>   	bool "ST SPEAr6XX"
> -	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
> +	depends on ARCH_MULTI_V5
>   	depends on !ARCH_SPEAR13XX
>   	select ARM_VIC
>   	help
> @@ -85,7 +84,7 @@ config MACH_SPEAR600
>   	  Supports ST SPEAr600 boards configured via the device-tree
>
>   config ARCH_SPEAR_AUTO
> -	def_bool PLAT_SPEAR_SINGLE
> +	bool
>   	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
>   	select ARCH_SPEAR3XX
>
>


Reviewed-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>

Re: [PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

On Tue, 2014-04-15 at 14:56 +0530, Rajeev kumar wrote:
> On 4/15/2014 1:56 PM, Paul Bolle wrote:
> > The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10
> > development cycle. It was removed in a merge commit before v3.10. A few
> > references to it were left in the tree, probably because they didn't
> > generate merge conflicts. Whatever it was, they're useless now and can
> > safely be removed.
> >
> > Reported-by: Martin Walch <walch.martin@web.de>
> > Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> > ---
> > 0) First version was broken: it left config ARCH_SPEAR_AUTO without its
> > bool type. This version is done on top of v3.15-rc1.
> >
> > 1) Still untested.
> >
> >   arch/arm/mach-spear/Kconfig | 9 ++++-----
> >   1 file changed, 4 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
> > index 0786249b2832..bc8a11c53377 100644
> > --- a/arch/arm/mach-spear/Kconfig
> > +++ b/arch/arm/mach-spear/Kconfig
> > @@ -4,7 +4,6 @@
> >
> >   menuconfig PLAT_SPEAR
> >   	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
> > -	default PLAT_SPEAR_SINGLE
> >   	select ARCH_REQUIRE_GPIOLIB
> >   	select ARM_AMBA
> >   	select CLKSRC_MMIO
> > @@ -13,7 +12,7 @@ if PLAT_SPEAR
> >
> >   config ARCH_SPEAR13XX
> >   	bool "ST SPEAr13xx"
> > -	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
> > +	depends on ARCH_MULTI_V7
> >   	select ARCH_HAS_CPUFREQ
> >   	select ARM_GIC
> >   	select GPIO_SPEAR_SPICS
> > @@ -41,7 +40,7 @@ endif #ARCH_SPEAR13XX
> >
> >   config ARCH_SPEAR3XX
> >   	bool "ST SPEAr3xx"
> > -	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
> > +	depends on ARCH_MULTI_V5
> >   	depends on !ARCH_SPEAR13XX
> >   	select ARM_VIC
> >   	select PINCTRL
> > @@ -72,7 +71,7 @@ endif
> >
> >   config ARCH_SPEAR6XX
> >   	bool "ST SPEAr6XX"
> > -	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
> > +	depends on ARCH_MULTI_V5
> >   	depends on !ARCH_SPEAR13XX
> >   	select ARM_VIC
> >   	help
> > @@ -85,7 +84,7 @@ config MACH_SPEAR600
> >   	  Supports ST SPEAr600 boards configured via the device-tree
> >
> >   config ARCH_SPEAR_AUTO
> > -	def_bool PLAT_SPEAR_SINGLE
> > +	bool
> >   	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
> >   	select ARCH_SPEAR3XX
> >
> >
> 
> 
> Reviewed-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>

Thanks!

This can still be seen in v3.16-rc1 and in today's linux-next (ie,
next-20140616). Is this trivial patch queued somewhere?


Paul Bolle

[PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

On Tue, 2014-04-15 at 14:56 +0530, Rajeev kumar wrote:
> On 4/15/2014 1:56 PM, Paul Bolle wrote:
> > The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10
> > development cycle. It was removed in a merge commit before v3.10. A few
> > references to it were left in the tree, probably because they didn't
> > generate merge conflicts. Whatever it was, they're useless now and can
> > safely be removed.
> >
> > Reported-by: Martin Walch <walch.martin@web.de>
> > Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> > ---
> > 0) First version was broken: it left config ARCH_SPEAR_AUTO without its
> > bool type. This version is done on top of v3.15-rc1.
> >
> > 1) Still untested.
> >
> >   arch/arm/mach-spear/Kconfig | 9 ++++-----
> >   1 file changed, 4 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
> > index 0786249b2832..bc8a11c53377 100644
> > --- a/arch/arm/mach-spear/Kconfig
> > +++ b/arch/arm/mach-spear/Kconfig
> > @@ -4,7 +4,6 @@
> >
> >   menuconfig PLAT_SPEAR
> >   	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
> > -	default PLAT_SPEAR_SINGLE
> >   	select ARCH_REQUIRE_GPIOLIB
> >   	select ARM_AMBA
> >   	select CLKSRC_MMIO
> > @@ -13,7 +12,7 @@ if PLAT_SPEAR
> >
> >   config ARCH_SPEAR13XX
> >   	bool "ST SPEAr13xx"
> > -	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
> > +	depends on ARCH_MULTI_V7
> >   	select ARCH_HAS_CPUFREQ
> >   	select ARM_GIC
> >   	select GPIO_SPEAR_SPICS
> > @@ -41,7 +40,7 @@ endif #ARCH_SPEAR13XX
> >
> >   config ARCH_SPEAR3XX
> >   	bool "ST SPEAr3xx"
> > -	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
> > +	depends on ARCH_MULTI_V5
> >   	depends on !ARCH_SPEAR13XX
> >   	select ARM_VIC
> >   	select PINCTRL
> > @@ -72,7 +71,7 @@ endif
> >
> >   config ARCH_SPEAR6XX
> >   	bool "ST SPEAr6XX"
> > -	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
> > +	depends on ARCH_MULTI_V5
> >   	depends on !ARCH_SPEAR13XX
> >   	select ARM_VIC
> >   	help
> > @@ -85,7 +84,7 @@ config MACH_SPEAR600
> >   	  Supports ST SPEAr600 boards configured via the device-tree
> >
> >   config ARCH_SPEAR_AUTO
> > -	def_bool PLAT_SPEAR_SINGLE
> > +	bool
> >   	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
> >   	select ARCH_SPEAR3XX
> >
> >
> 
> 
> Reviewed-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>

Thanks!

This can still be seen in v3.16-rc1 and in today's linux-next (ie,
next-20140616). Is this trivial patch queued somewhere?


Paul Bolle

Re: [PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

On Mon, 2014-06-16 at 13:49 +0200, Paul Bolle wrote:
> On Tue, 2014-04-15 at 14:56 +0530, Rajeev kumar wrote:
> > On 4/15/2014 1:56 PM, Paul Bolle wrote:
> > > The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10
> > > development cycle. It was removed in a merge commit before v3.10. A few
> > > references to it were left in the tree, probably because they didn't
> > > generate merge conflicts. Whatever it was, they're useless now and can
> > > safely be removed.
> > >
> > > Reported-by: Martin Walch <walch.martin@web.de>
> > > Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> > > ---
> > > 0) First version was broken: it left config ARCH_SPEAR_AUTO without its
> > > bool type. This version is done on top of v3.15-rc1.
> > >
> > > 1) Still untested.
> > >
> > >   arch/arm/mach-spear/Kconfig | 9 ++++-----
> > >   1 file changed, 4 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
> > > index 0786249b2832..bc8a11c53377 100644
> > > --- a/arch/arm/mach-spear/Kconfig
> > > +++ b/arch/arm/mach-spear/Kconfig
> > > @@ -4,7 +4,6 @@
> > >
> > >   menuconfig PLAT_SPEAR
> > >   	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
> > > -	default PLAT_SPEAR_SINGLE
> > >   	select ARCH_REQUIRE_GPIOLIB
> > >   	select ARM_AMBA
> > >   	select CLKSRC_MMIO
> > > @@ -13,7 +12,7 @@ if PLAT_SPEAR
> > >
> > >   config ARCH_SPEAR13XX
> > >   	bool "ST SPEAr13xx"
> > > -	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
> > > +	depends on ARCH_MULTI_V7
> > >   	select ARCH_HAS_CPUFREQ
> > >   	select ARM_GIC
> > >   	select GPIO_SPEAR_SPICS
> > > @@ -41,7 +40,7 @@ endif #ARCH_SPEAR13XX
> > >
> > >   config ARCH_SPEAR3XX
> > >   	bool "ST SPEAr3xx"
> > > -	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
> > > +	depends on ARCH_MULTI_V5
> > >   	depends on !ARCH_SPEAR13XX
> > >   	select ARM_VIC
> > >   	select PINCTRL
> > > @@ -72,7 +71,7 @@ endif
> > >
> > >   config ARCH_SPEAR6XX
> > >   	bool "ST SPEAr6XX"
> > > -	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
> > > +	depends on ARCH_MULTI_V5
> > >   	depends on !ARCH_SPEAR13XX
> > >   	select ARM_VIC
> > >   	help
> > > @@ -85,7 +84,7 @@ config MACH_SPEAR600
> > >   	  Supports ST SPEAr600 boards configured via the device-tree
> > >
> > >   config ARCH_SPEAR_AUTO
> > > -	def_bool PLAT_SPEAR_SINGLE
> > > +	bool
> > >   	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
> > >   	select ARCH_SPEAR3XX
> > >
> > >
> > 
> > 
> > Reviewed-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
> 
> Thanks!
> 
> This can still be seen in v3.16-rc1 and in today's linux-next (ie,
> next-20140616). Is this trivial patch queued somewhere?

Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?


Paul Bolle

[PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

On Mon, 2014-06-16 at 13:49 +0200, Paul Bolle wrote:
> On Tue, 2014-04-15 at 14:56 +0530, Rajeev kumar wrote:
> > On 4/15/2014 1:56 PM, Paul Bolle wrote:
> > > The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10
> > > development cycle. It was removed in a merge commit before v3.10. A few
> > > references to it were left in the tree, probably because they didn't
> > > generate merge conflicts. Whatever it was, they're useless now and can
> > > safely be removed.
> > >
> > > Reported-by: Martin Walch <walch.martin@web.de>
> > > Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> > > ---
> > > 0) First version was broken: it left config ARCH_SPEAR_AUTO without its
> > > bool type. This version is done on top of v3.15-rc1.
> > >
> > > 1) Still untested.
> > >
> > >   arch/arm/mach-spear/Kconfig | 9 ++++-----
> > >   1 file changed, 4 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
> > > index 0786249b2832..bc8a11c53377 100644
> > > --- a/arch/arm/mach-spear/Kconfig
> > > +++ b/arch/arm/mach-spear/Kconfig
> > > @@ -4,7 +4,6 @@
> > >
> > >   menuconfig PLAT_SPEAR
> > >   	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
> > > -	default PLAT_SPEAR_SINGLE
> > >   	select ARCH_REQUIRE_GPIOLIB
> > >   	select ARM_AMBA
> > >   	select CLKSRC_MMIO
> > > @@ -13,7 +12,7 @@ if PLAT_SPEAR
> > >
> > >   config ARCH_SPEAR13XX
> > >   	bool "ST SPEAr13xx"
> > > -	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
> > > +	depends on ARCH_MULTI_V7
> > >   	select ARCH_HAS_CPUFREQ
> > >   	select ARM_GIC
> > >   	select GPIO_SPEAR_SPICS
> > > @@ -41,7 +40,7 @@ endif #ARCH_SPEAR13XX
> > >
> > >   config ARCH_SPEAR3XX
> > >   	bool "ST SPEAr3xx"
> > > -	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
> > > +	depends on ARCH_MULTI_V5
> > >   	depends on !ARCH_SPEAR13XX
> > >   	select ARM_VIC
> > >   	select PINCTRL
> > > @@ -72,7 +71,7 @@ endif
> > >
> > >   config ARCH_SPEAR6XX
> > >   	bool "ST SPEAr6XX"
> > > -	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
> > > +	depends on ARCH_MULTI_V5
> > >   	depends on !ARCH_SPEAR13XX
> > >   	select ARM_VIC
> > >   	help
> > > @@ -85,7 +84,7 @@ config MACH_SPEAR600
> > >   	  Supports ST SPEAr600 boards configured via the device-tree
> > >
> > >   config ARCH_SPEAR_AUTO
> > > -	def_bool PLAT_SPEAR_SINGLE
> > > +	bool
> > >   	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
> > >   	select ARCH_SPEAR3XX
> > >
> > >
> > 
> > 
> > Reviewed-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
> 
> Thanks!
> 
> This can still be seen in v3.16-rc1 and in today's linux-next (ie,
> next-20140616). Is this trivial patch queued somewhere?

Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?


Paul Bolle

Re: [PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

On Fri, 2014-09-05 at 11:27 +0200, Paul Bolle wrote:
> On Mon, 2014-06-16 at 13:49 +0200, Paul Bolle wrote:
> > On Tue, 2014-04-15 at 14:56 +0530, Rajeev kumar wrote:
> > > Reviewed-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
> > 
> > Thanks!
> > 
> > This can still be seen in v3.16-rc1 and in today's linux-next (ie,
> > next-20140616). Is this trivial patch queued somewhere?
> 
> Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?

And now Rajeev's address bounces. Has Rajeev left ST?


Paul Bolle

[PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

On Fri, 2014-09-05 at 11:27 +0200, Paul Bolle wrote:
> On Mon, 2014-06-16 at 13:49 +0200, Paul Bolle wrote:
> > On Tue, 2014-04-15 at 14:56 +0530, Rajeev kumar wrote:
> > > Reviewed-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
> > 
> > Thanks!
> > 
> > This can still be seen in v3.16-rc1 and in today's linux-next (ie,
> > next-20140616). Is this trivial patch queued somewhere?
> 
> Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?

And now Rajeev's address bounces. Has Rajeev left ST?


Paul Bolle

Re: [PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Viresh Kumar]

On Fri, Sep 5, 2014 at 3:09 PM, Paul Bolle <pebolle@tiscali.nl> wrote:
>> Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?

You need to send it to arm@kernel.org..

> And now Rajeev's address bounces. Has Rajeev left ST?

Yeah both Shiraz/Rajeev and myself have left ST :)

You can add
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

--
viresh

[PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Viresh Kumar]

On Fri, Sep 5, 2014 at 3:09 PM, Paul Bolle <pebolle@tiscali.nl> wrote:
>> Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?

You need to send it to arm at kernel.org..

> And now Rajeev's address bounces. Has Rajeev left ST?

Yeah both Shiraz/Rajeev and myself have left ST :)

You can add
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

--
viresh

RE: [PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[bhupesh.sharma]

> -----Original Message-----
> From: linux-arm-kernel [mailto:linux-arm-kernel-
> bounces@lists.infradead.org] On Behalf Of Paul Bolle
> Sent: Friday, September 05, 2014 3:09 PM
> To: Viresh Kumar; Shiraz Hashim
> Cc: Russell King; Richard Weinberger; Martin Walch; spear-
> devel@list.st.com; linux-kernel@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [PATCH v2] ARM: spear: Remove references to
> PLAT_SPEAR_SINGLE
> 
> On Fri, 2014-09-05 at 11:27 +0200, Paul Bolle wrote:
> > On Mon, 2014-06-16 at 13:49 +0200, Paul Bolle wrote:
> > > On Tue, 2014-04-15 at 14:56 +0530, Rajeev kumar wrote:
> > > > Reviewed-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
> > >
> > > Thanks!
> > >
> > > This can still be seen in v3.16-rc1 and in today's linux-next (ie,
> > > next-20140616). Is this trivial patch queued somewhere?
> >
> > Ditto for v3.17-rc3 and next-20140904. Could someone please pix this
> up?
> 
> And now Rajeev's address bounces. Has Rajeev left ST?
> 
> 

Copying Rajeev' new id.


Regards,
Bhupesh

> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[bhupesh.sharma at freescale.com]

> -----Original Message-----
> From: linux-arm-kernel [mailto:linux-arm-kernel-
> bounces at lists.infradead.org] On Behalf Of Paul Bolle
> Sent: Friday, September 05, 2014 3:09 PM
> To: Viresh Kumar; Shiraz Hashim
> Cc: Russell King; Richard Weinberger; Martin Walch; spear-
> devel at list.st.com; linux-kernel at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org
> Subject: Re: [PATCH v2] ARM: spear: Remove references to
> PLAT_SPEAR_SINGLE
> 
> On Fri, 2014-09-05 at 11:27 +0200, Paul Bolle wrote:
> > On Mon, 2014-06-16 at 13:49 +0200, Paul Bolle wrote:
> > > On Tue, 2014-04-15 at 14:56 +0530, Rajeev kumar wrote:
> > > > Reviewed-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
> > >
> > > Thanks!
> > >
> > > This can still be seen in v3.16-rc1 and in today's linux-next (ie,
> > > next-20140616). Is this trivial patch queued somewhere?
> >
> > Ditto for v3.17-rc3 and next-20140904. Could someone please pix this
> up?
> 
> And now Rajeev's address bounces. Has Rajeev left ST?
> 
> 

Copying Rajeev' new id.


Regards,
Bhupesh

> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

Viresh,

On Fri, 2014-09-05 at 15:13 +0530, Viresh Kumar wrote:
> On Fri, Sep 5, 2014 at 3:09 PM, Paul Bolle <pebolle@tiscali.nl> wrote:
> >> Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?
> 
> You need to send it to arm@kernel.org..

Will do, no problem. But why actually? (Note that MAINTAINERS is silent
on arm@kernel.org. Maybe that address is documented elsewhere.)

> > And now Rajeev's address bounces. Has Rajeev left ST?
> 
> Yeah both Shiraz/Rajeev and myself have left ST :)

I see. Is there a current address for Rajeev.? I will not keep an
Acked-by on a bouncing address.

> You can add
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Thanks,


Paul Bolle

[PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

Viresh,

On Fri, 2014-09-05 at 15:13 +0530, Viresh Kumar wrote:
> On Fri, Sep 5, 2014 at 3:09 PM, Paul Bolle <pebolle@tiscali.nl> wrote:
> >> Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?
> 
> You need to send it to arm at kernel.org..

Will do, no problem. But why actually? (Note that MAINTAINERS is silent
on arm at kernel.org. Maybe that address is documented elsewhere.)

> > And now Rajeev's address bounces. Has Rajeev left ST?
> 
> Yeah both Shiraz/Rajeev and myself have left ST :)

I see. Is there a current address for Rajeev.? I will not keep an
Acked-by on a bouncing address.

> You can add
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Thanks,


Paul Bolle

Re: [PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Viresh Kumar]

On 5 September 2014 15:20, Paul Bolle <pebolle@tiscali.nl> wrote:
> On Fri, 2014-09-05 at 15:13 +0530, Viresh Kumar wrote:
>> On Fri, Sep 5, 2014 at 3:09 PM, Paul Bolle <pebolle@tiscali.nl> wrote:
>> >> Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?
>>
>> You need to send it to arm@kernel.org..
>
> Will do, no problem. But why actually? (Note that MAINTAINERS is silent
> on arm@kernel.org. Maybe that address is documented elsewhere.)

Don't know where it is documented.

@Arnd: ??

>> > And now Rajeev's address bounces. Has Rajeev left ST?
>>
>> Yeah both Shiraz/Rajeev and myself have left ST :)
>
> I see. Is there a current address for Rajeev.? I will not keep an
> Acked-by on a bouncing address.

rajivrec@gmail.com

>> You can add
>> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> Thanks,

Welcome !!

[PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Viresh Kumar]

On 5 September 2014 15:20, Paul Bolle <pebolle@tiscali.nl> wrote:
> On Fri, 2014-09-05 at 15:13 +0530, Viresh Kumar wrote:
>> On Fri, Sep 5, 2014 at 3:09 PM, Paul Bolle <pebolle@tiscali.nl> wrote:
>> >> Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?
>>
>> You need to send it to arm at kernel.org..
>
> Will do, no problem. But why actually? (Note that MAINTAINERS is silent
> on arm at kernel.org. Maybe that address is documented elsewhere.)

Don't know where it is documented.

@Arnd: ??

>> > And now Rajeev's address bounces. Has Rajeev left ST?
>>
>> Yeah both Shiraz/Rajeev and myself have left ST :)
>
> I see. Is there a current address for Rajeev.? I will not keep an
> Acked-by on a bouncing address.

rajivrec at gmail.com

>> You can add
>> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> Thanks,

Welcome !!

Re: [PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Arnd Bergmann]

On Friday 05 September 2014 15:24:31 Viresh Kumar wrote:
> On 5 September 2014 15:20, Paul Bolle <pebolle@tiscali.nl> wrote:
> > On Fri, 2014-09-05 at 15:13 +0530, Viresh Kumar wrote:
> >> On Fri, Sep 5, 2014 at 3:09 PM, Paul Bolle <pebolle@tiscali.nl> wrote:
> >> >> Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?
> >>
> >> You need to send it to arm@kernel.org..
> >
> > Will do, no problem. But why actually? (Note that MAINTAINERS is silent
> > on arm@kernel.org. Maybe that address is documented elsewhere.)
> 
> Don't know where it is documented.
> 
> @Arnd: ??

We have avoided documenting it so far, to avoid getting spammed with trivial
patches that should get picked up by the subarch maintainers instead.

I've applied this patch to the next/fixes-non-critical branch now, with minor
fixup for a conflict that has come in. See below for the final version.

	Arnd

---
commit 3b0b8ec99aadea710f3dece74c95523463c0087a
Author: Paul Bolle <pebolle@tiscali.nl>
Date:   Tue Apr 15 10:26:47 2014 +0200

    ARM: spear: Remove references to PLAT_SPEAR_SINGLE
    
    The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10
    development cycle. It was removed in a merge commit before v3.10. A few
    references to it were left in the tree, probably because they didn't
    generate merge conflicts. Whatever it was, they're useless now and can
    safely be removed.
    
    Reported-by: Martin Walch <walch.martin@web.de>
    Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
    Reviewed-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
    Cc: Rajeev Kumar <rajeev_kumar@mentor.com>
    Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
    Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 6fd4dc88160b..b6f4bda273b3 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig PLAT_SPEAR
 	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
-	default PLAT_SPEAR_SINGLE
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO
@@ -13,7 +12,7 @@ if PLAT_SPEAR
 
 config ARCH_SPEAR13XX
 	bool "ST SPEAr13xx"
-	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select GPIO_SPEAR_SPICS
 	select HAVE_ARM_SCU if SMP
@@ -44,7 +43,7 @@ endif #ARCH_SPEAR13XX
 
 config ARCH_SPEAR3XX
 	bool "ST SPEAr3xx"
-	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V5
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
 	select PINCTRL
@@ -75,7 +74,7 @@ endif
 
 config ARCH_SPEAR6XX
 	bool "ST SPEAr6XX"
-	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V5
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
 	help
@@ -88,7 +87,7 @@ config MACH_SPEAR600
 	  Supports ST SPEAr600 boards configured via the device-tree
 
 config ARCH_SPEAR_AUTO
-	def_bool PLAT_SPEAR_SINGLE
+	bool
 	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
 	select ARCH_SPEAR3XX
 

[PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Arnd Bergmann]

On Friday 05 September 2014 15:24:31 Viresh Kumar wrote:
> On 5 September 2014 15:20, Paul Bolle <pebolle@tiscali.nl> wrote:
> > On Fri, 2014-09-05 at 15:13 +0530, Viresh Kumar wrote:
> >> On Fri, Sep 5, 2014 at 3:09 PM, Paul Bolle <pebolle@tiscali.nl> wrote:
> >> >> Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?
> >>
> >> You need to send it to arm at kernel.org..
> >
> > Will do, no problem. But why actually? (Note that MAINTAINERS is silent
> > on arm at kernel.org. Maybe that address is documented elsewhere.)
> 
> Don't know where it is documented.
> 
> @Arnd: ??

We have avoided documenting it so far, to avoid getting spammed with trivial
patches that should get picked up by the subarch maintainers instead.

I've applied this patch to the next/fixes-non-critical branch now, with minor
fixup for a conflict that has come in. See below for the final version.

	Arnd

---
commit 3b0b8ec99aadea710f3dece74c95523463c0087a
Author: Paul Bolle <pebolle@tiscali.nl>
Date:   Tue Apr 15 10:26:47 2014 +0200

    ARM: spear: Remove references to PLAT_SPEAR_SINGLE
    
    The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10
    development cycle. It was removed in a merge commit before v3.10. A few
    references to it were left in the tree, probably because they didn't
    generate merge conflicts. Whatever it was, they're useless now and can
    safely be removed.
    
    Reported-by: Martin Walch <walch.martin@web.de>
    Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
    Reviewed-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
    Cc: Rajeev Kumar <rajeev_kumar@mentor.com>
    Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
    Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 6fd4dc88160b..b6f4bda273b3 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig PLAT_SPEAR
 	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
-	default PLAT_SPEAR_SINGLE
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO
@@ -13,7 +12,7 @@ if PLAT_SPEAR
 
 config ARCH_SPEAR13XX
 	bool "ST SPEAr13xx"
-	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select GPIO_SPEAR_SPICS
 	select HAVE_ARM_SCU if SMP
@@ -44,7 +43,7 @@ endif #ARCH_SPEAR13XX
 
 config ARCH_SPEAR3XX
 	bool "ST SPEAr3xx"
-	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V5
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
 	select PINCTRL
@@ -75,7 +74,7 @@ endif
 
 config ARCH_SPEAR6XX
 	bool "ST SPEAr6XX"
-	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+	depends on ARCH_MULTI_V5
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
 	help
@@ -88,7 +87,7 @@ config MACH_SPEAR600
 	  Supports ST SPEAr600 boards configured via the device-tree
 
 config ARCH_SPEAR_AUTO
-	def_bool PLAT_SPEAR_SINGLE
+	bool
 	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
 	select ARCH_SPEAR3XX
 

Re: [PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

On Fri, 2014-09-05 at 13:38 +0200, Arnd Bergmann wrote:
> I've applied this patch to the next/fixes-non-critical branch now, with minor
> fixup for a conflict that has come in. See below for the final version.

Thanks for picking this up!


Paul Bolle

[PATCH v2] ARM: spear: Remove references to PLAT_SPEAR_SINGLE

[Paul Bolle]

On Fri, 2014-09-05 at 13:38 +0200, Arnd Bergmann wrote:
> I've applied this patch to the next/fixes-non-critical branch now, with minor
> fixup for a conflict that has come in. See below for the final version.

Thanks for picking this up!


Paul Bolle