From: Anson Huang <b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org> To: shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Subject: [PATCH V2 2/2] ARM: imx: add speed grading check for i.mx6 soc Date: Wed, 12 Feb 2014 17:57:03 +0800 [thread overview] Message-ID: <1392199023-29880-2-git-send-email-b20788@freescale.com> (raw) In-Reply-To: <1392199023-29880-1-git-send-email-b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org> The fuse map of speed_grading[1:0] defines the max speed of ARM, see below the definition: 2b'11: 1200000000Hz; 2b'10: 996000000Hz; 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz. 2b'00: 792000000Hz; Need to remove all illegal setpoints according to fuse map. Signed-off-by: Anson Huang <b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org> --- arch/arm/mach-imx/mach-imx6q.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index d131499..1e12685 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -253,8 +253,10 @@ static void __init imx6q_init_machine(void) #define OCOTP_CFG3 0x440 #define OCOTP_CFG3_SPEED_SHIFT 16 #define OCOTP_CFG3_SPEED_1P2GHZ 0x3 +#define OCOTP_CFG3_SPEED_996MHZ 0x2 +#define OCOTP_CFG3_SPEED_852MHZ 0x1 -static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) +static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev) { struct device_node *np; void __iomem *base; @@ -272,11 +274,29 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) goto put_node; } + /* + * SPEED_GRADING[1:0] defines the max speed of ARM: + * 2b'11: 1200000000Hz; + * 2b'10: 996000000Hz; + * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz. + * 2b'00: 792000000Hz; + * We need to set the max speed of ARM according to fuse map. + */ val = readl_relaxed(base + OCOTP_CFG3); val >>= OCOTP_CFG3_SPEED_SHIFT; - if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ) + val &= 0x3; + + if (val != OCOTP_CFG3_SPEED_1P2GHZ) if (dev_pm_opp_disable(cpu_dev, 1200000000)) pr_warn("failed to disable 1.2 GHz OPP\n"); + if (val < OCOTP_CFG3_SPEED_996MHZ) + if (dev_pm_opp_disable(cpu_dev, 996000000)) + pr_warn("failed to disable 996 MHz OPP\n"); + if (cpu_is_imx6q()) { + if (val != OCOTP_CFG3_SPEED_852MHZ) + if (dev_pm_opp_disable(cpu_dev, 852000000)) + pr_warn("failed to disable 852 MHz OPP\n"); + } put_node: of_node_put(np); @@ -302,7 +322,7 @@ static void __init imx6q_opp_init(void) goto put_node; } - imx6q_opp_check_1p2ghz(cpu_dev); + imx6q_opp_check_speed_grading(cpu_dev); put_node: of_node_put(np); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: b20788@freescale.com (Anson Huang) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH V2 2/2] ARM: imx: add speed grading check for i.mx6 soc Date: Wed, 12 Feb 2014 17:57:03 +0800 [thread overview] Message-ID: <1392199023-29880-2-git-send-email-b20788@freescale.com> (raw) In-Reply-To: <1392199023-29880-1-git-send-email-b20788@freescale.com> The fuse map of speed_grading[1:0] defines the max speed of ARM, see below the definition: 2b'11: 1200000000Hz; 2b'10: 996000000Hz; 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz. 2b'00: 792000000Hz; Need to remove all illegal setpoints according to fuse map. Signed-off-by: Anson Huang <b20788@freescale.com> --- arch/arm/mach-imx/mach-imx6q.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index d131499..1e12685 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -253,8 +253,10 @@ static void __init imx6q_init_machine(void) #define OCOTP_CFG3 0x440 #define OCOTP_CFG3_SPEED_SHIFT 16 #define OCOTP_CFG3_SPEED_1P2GHZ 0x3 +#define OCOTP_CFG3_SPEED_996MHZ 0x2 +#define OCOTP_CFG3_SPEED_852MHZ 0x1 -static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) +static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev) { struct device_node *np; void __iomem *base; @@ -272,11 +274,29 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) goto put_node; } + /* + * SPEED_GRADING[1:0] defines the max speed of ARM: + * 2b'11: 1200000000Hz; + * 2b'10: 996000000Hz; + * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz. + * 2b'00: 792000000Hz; + * We need to set the max speed of ARM according to fuse map. + */ val = readl_relaxed(base + OCOTP_CFG3); val >>= OCOTP_CFG3_SPEED_SHIFT; - if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ) + val &= 0x3; + + if (val != OCOTP_CFG3_SPEED_1P2GHZ) if (dev_pm_opp_disable(cpu_dev, 1200000000)) pr_warn("failed to disable 1.2 GHz OPP\n"); + if (val < OCOTP_CFG3_SPEED_996MHZ) + if (dev_pm_opp_disable(cpu_dev, 996000000)) + pr_warn("failed to disable 996 MHz OPP\n"); + if (cpu_is_imx6q()) { + if (val != OCOTP_CFG3_SPEED_852MHZ) + if (dev_pm_opp_disable(cpu_dev, 852000000)) + pr_warn("failed to disable 852 MHz OPP\n"); + } put_node: of_node_put(np); @@ -302,7 +322,7 @@ static void __init imx6q_opp_init(void) goto put_node; } - imx6q_opp_check_1p2ghz(cpu_dev); + imx6q_opp_check_speed_grading(cpu_dev); put_node: of_node_put(np); -- 1.7.9.5
next prev parent reply other threads:[~2014-02-12 9:57 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-02-12 9:57 [PATCH V2 1/2] ARM: dts: imx6q: add 852MHz setpoint for CPU freq Anson Huang 2014-02-12 9:57 ` Anson Huang [not found] ` <1392199023-29880-1-git-send-email-b20788-KZfg59tc24xl57MIdRCFDg@public.gmane.org> 2014-02-12 9:57 ` Anson Huang [this message] 2014-02-12 9:57 ` [PATCH V2 2/2] ARM: imx: add speed grading check for i.mx6 soc Anson Huang 2014-02-13 2:17 ` [PATCH V2 1/2] ARM: dts: imx6q: add 852MHz setpoint for CPU freq Shawn Guo 2014-02-13 2:17 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1392199023-29880-2-git-send-email-b20788@freescale.com \ --to=b20788-kzfg59tc24xl57midrcfdg@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.