From: Roger Quadros <rogerq@ti.com>
To: <tony@atomide.com>, <bcousson@baylibre.com>, <lee.jones@linaro.org>
Cc: <balbi@ti.com>, <nm@ti.com>, <khilman@linaro.org>,
<linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-usb@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v7 00/12] USB Host support for OMAP5 uEVM
Date: Wed, 12 Feb 2014 12:18:41 +0200 [thread overview]
Message-ID: <1392200333-28397-1-git-send-email-rogerq@ti.com> (raw)
Hi Benoit, Tony & Lee,
This patchset brings up USB Host ports and Ethernet port on
the OMAP5 uEVM board. Please queue these for -next.
Tested on:
- OMAP5 uEVM
- Pandaboard ES Rev. B1
- Beagleboard-XM Rev C2
- Beagleboard Rev C4.
Changelog:
v7:
- Rebased on 3.14-rc2
- Removed incompatible ids from DT files and examples
v6:
- Initialized clocks to -ENODEV and split patch 3.
v5:
- Expose all clocks in the DT binding document for mfd:omap-usb-host
and mfd:omap-usb-tll
v4:
- Updated DT binding document for clock binding
v3:
- Rebased on top of 3.13-rc7
cheers,
-roger
--
Roger Quadros (12):
mfd: omap-usb-host: Use resource managed clk_get()
mfd: omap-usb-host: Get clocks based on hardware revision
mfd: omap-usb-host: Use clock names as per function for reference
clocks
mfd: omap-usb-host: Update DT clock binding information
mfd: omap-usb-tll: Update DT clock binding information
ARM: dts: omap4: Update omap-usb-host node
ARM: dts: omap5: Update omap-usb-host node
ARM: dts: omap4-panda: Provide USB PHY clock
ARM: dts: omap5-uevm: Provide USB PHY clock
ARM: OMAP2+: Remove legacy_init_ehci_clk()
ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes
usb: omap: dts: Update DT binding example usage
.../devicetree/bindings/mfd/omap-usb-host.txt | 23 +++
.../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
.../devicetree/bindings/usb/ehci-omap.txt | 2 +-
.../devicetree/bindings/usb/ohci-omap3.txt | 2 +-
arch/arm/boot/dts/omap3.dtsi | 4 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4.dtsi | 10 +-
arch/arm/boot/dts/omap5-uevm.dts | 8 +-
arch/arm/boot/dts/omap5.dtsi | 10 +-
arch/arm/mach-omap2/pdata-quirks.c | 16 --
drivers/mfd/omap-usb-host.c | 171 ++++++++++-----------
11 files changed, 136 insertions(+), 128 deletions(-)
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com>
To: tony@atomide.com, bcousson@baylibre.com, lee.jones@linaro.org
Cc: nm@ti.com, devicetree@vger.kernel.org, khilman@linaro.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
balbi@ti.com, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Roger Quadros <rogerq@ti.com>
Subject: [PATCH v7 00/12] USB Host support for OMAP5 uEVM
Date: Wed, 12 Feb 2014 12:18:41 +0200 [thread overview]
Message-ID: <1392200333-28397-1-git-send-email-rogerq@ti.com> (raw)
Hi Benoit, Tony & Lee,
This patchset brings up USB Host ports and Ethernet port on
the OMAP5 uEVM board. Please queue these for -next.
Tested on:
- OMAP5 uEVM
- Pandaboard ES Rev. B1
- Beagleboard-XM Rev C2
- Beagleboard Rev C4.
Changelog:
v7:
- Rebased on 3.14-rc2
- Removed incompatible ids from DT files and examples
v6:
- Initialized clocks to -ENODEV and split patch 3.
v5:
- Expose all clocks in the DT binding document for mfd:omap-usb-host
and mfd:omap-usb-tll
v4:
- Updated DT binding document for clock binding
v3:
- Rebased on top of 3.13-rc7
cheers,
-roger
--
Roger Quadros (12):
mfd: omap-usb-host: Use resource managed clk_get()
mfd: omap-usb-host: Get clocks based on hardware revision
mfd: omap-usb-host: Use clock names as per function for reference
clocks
mfd: omap-usb-host: Update DT clock binding information
mfd: omap-usb-tll: Update DT clock binding information
ARM: dts: omap4: Update omap-usb-host node
ARM: dts: omap5: Update omap-usb-host node
ARM: dts: omap4-panda: Provide USB PHY clock
ARM: dts: omap5-uevm: Provide USB PHY clock
ARM: OMAP2+: Remove legacy_init_ehci_clk()
ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes
usb: omap: dts: Update DT binding example usage
.../devicetree/bindings/mfd/omap-usb-host.txt | 23 +++
.../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
.../devicetree/bindings/usb/ehci-omap.txt | 2 +-
.../devicetree/bindings/usb/ohci-omap3.txt | 2 +-
arch/arm/boot/dts/omap3.dtsi | 4 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4.dtsi | 10 +-
arch/arm/boot/dts/omap5-uevm.dts | 8 +-
arch/arm/boot/dts/omap5.dtsi | 10 +-
arch/arm/mach-omap2/pdata-quirks.c | 16 --
drivers/mfd/omap-usb-host.c | 171 ++++++++++-----------
11 files changed, 136 insertions(+), 128 deletions(-)
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: rogerq@ti.com (Roger Quadros)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 00/12] USB Host support for OMAP5 uEVM
Date: Wed, 12 Feb 2014 12:18:41 +0200 [thread overview]
Message-ID: <1392200333-28397-1-git-send-email-rogerq@ti.com> (raw)
Hi Benoit, Tony & Lee,
This patchset brings up USB Host ports and Ethernet port on
the OMAP5 uEVM board. Please queue these for -next.
Tested on:
- OMAP5 uEVM
- Pandaboard ES Rev. B1
- Beagleboard-XM Rev C2
- Beagleboard Rev C4.
Changelog:
v7:
- Rebased on 3.14-rc2
- Removed incompatible ids from DT files and examples
v6:
- Initialized clocks to -ENODEV and split patch 3.
v5:
- Expose all clocks in the DT binding document for mfd:omap-usb-host
and mfd:omap-usb-tll
v4:
- Updated DT binding document for clock binding
v3:
- Rebased on top of 3.13-rc7
cheers,
-roger
--
Roger Quadros (12):
mfd: omap-usb-host: Use resource managed clk_get()
mfd: omap-usb-host: Get clocks based on hardware revision
mfd: omap-usb-host: Use clock names as per function for reference
clocks
mfd: omap-usb-host: Update DT clock binding information
mfd: omap-usb-tll: Update DT clock binding information
ARM: dts: omap4: Update omap-usb-host node
ARM: dts: omap5: Update omap-usb-host node
ARM: dts: omap4-panda: Provide USB PHY clock
ARM: dts: omap5-uevm: Provide USB PHY clock
ARM: OMAP2+: Remove legacy_init_ehci_clk()
ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes
usb: omap: dts: Update DT binding example usage
.../devicetree/bindings/mfd/omap-usb-host.txt | 23 +++
.../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
.../devicetree/bindings/usb/ehci-omap.txt | 2 +-
.../devicetree/bindings/usb/ohci-omap3.txt | 2 +-
arch/arm/boot/dts/omap3.dtsi | 4 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
arch/arm/boot/dts/omap4.dtsi | 10 +-
arch/arm/boot/dts/omap5-uevm.dts | 8 +-
arch/arm/boot/dts/omap5.dtsi | 10 +-
arch/arm/mach-omap2/pdata-quirks.c | 16 --
drivers/mfd/omap-usb-host.c | 171 ++++++++++-----------
11 files changed, 136 insertions(+), 128 deletions(-)
--
1.8.3.2
next reply other threads:[~2014-02-12 10:19 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-12 10:18 Roger Quadros [this message]
2014-02-12 10:18 ` [PATCH v7 00/12] USB Host support for OMAP5 uEVM Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` [PATCH v7 01/12] mfd: omap-usb-host: Use resource managed clk_get() Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-14 9:57 ` Lee Jones
2014-02-14 9:57 ` Lee Jones
2014-02-14 9:57 ` Lee Jones
2014-02-12 10:18 ` [PATCH v7 02/12] mfd: omap-usb-host: Get clocks based on hardware revision Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-14 10:07 ` Lee Jones
2014-02-14 10:07 ` Lee Jones
2014-02-14 10:07 ` Lee Jones
2014-02-14 11:12 ` Roger Quadros
2014-02-14 11:12 ` Roger Quadros
2014-02-14 11:12 ` Roger Quadros
2014-02-12 10:18 ` [PATCH v7 03/12] mfd: omap-usb-host: Use clock names as per function for reference clocks Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-14 10:09 ` Lee Jones
2014-02-14 10:09 ` Lee Jones
2014-02-14 10:09 ` Lee Jones
2014-02-14 13:12 ` Roger Quadros
2014-02-14 13:12 ` Roger Quadros
2014-02-14 13:12 ` Roger Quadros
2014-02-14 13:33 ` Lee Jones
2014-02-14 13:33 ` Lee Jones
2014-02-18 15:28 ` Roger Quadros
2014-02-18 15:28 ` Roger Quadros
2014-02-18 15:28 ` Roger Quadros
2014-02-18 16:07 ` Lee Jones
2014-02-18 16:07 ` Lee Jones
2014-02-12 10:18 ` [PATCH v7 04/12] mfd: omap-usb-host: Update DT clock binding information Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` [PATCH v7 05/12] mfd: omap-usb-tll: " Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` [PATCH v7 06/12] ARM: dts: omap4: Update omap-usb-host node Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` [PATCH v7 07/12] ARM: dts: omap5: " Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` [PATCH v7 08/12] ARM: dts: omap4-panda: Provide USB PHY clock Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` [PATCH v7 09/12] ARM: dts: omap5-uevm: " Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` [PATCH v7 10/12] ARM: OMAP2+: Remove legacy_init_ehci_clk() Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` [PATCH v7 11/12] ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` [PATCH v7 12/12] usb: omap: dts: Update DT binding example usage Roger Quadros
2014-02-12 10:18 ` Roger Quadros
2014-02-12 10:18 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392200333-28397-1-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@linaro.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nm@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.