From: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: <netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Cc: <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>,
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
<cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
<mark.rutland-5wv7dgnIgG8@public.gmane.org>,
<romieu-W8zweXLXuWQS+FvcfC7Uqw@public.gmane.org>,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH net-next v5 00/10] Support for the Broadcom GENET driver
Date: Thu, 13 Feb 2014 16:08:41 -0800 [thread overview]
Message-ID: <1392336531-28875-1-git-send-email-f.fainelli@gmail.com> (raw)
This patchset adds support for the Broadcom GENET Gigabit Ethernet MAC
controller. This controller is found on the Broadcom BCM7xxx Set Top Box
System-on-a-chips.
Changes since v4:
- add dependency on CONFIG_OF
Changes since v3:
- fixed Kconfig dependency on FIXED_PHY
Changes since v2:
- dropped the patch that adds an "internal" phy-mode
Florian Fainelli (10):
net: phy: add MoCA PHY type
net: phy: update port type for MoCA PHYs
net: phy: broadcom: extract register definitions
net: phy: add Broadcom BCM7xxx internal PHY driver
net: bcmgenet: add driver definitions and private structure
net: bcmgenet: add main driver file
net: bcmgenet: add MDIO routines
net: bcmgenet: hook into the build system
Documentation: add Device tree bindings for Broadcom GENET
MAINTAINERS: add entry for the Broadcom GENET driver
.../devicetree/bindings/net/broadcom-bcmgenet.txt | 121 +
MAINTAINERS | 6 +
drivers/net/ethernet/broadcom/Kconfig | 11 +
drivers/net/ethernet/broadcom/Makefile | 1 +
drivers/net/ethernet/broadcom/genet/Makefile | 2 +
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2595 ++++++++++++++++++++
drivers/net/ethernet/broadcom/genet/bcmgenet.h | 630 +++++
drivers/net/ethernet/broadcom/genet/bcmmii.c | 464 ++++
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/bcm7xxx.c | 343 +++
drivers/net/phy/broadcom.c | 52 -
drivers/net/phy/phy.c | 5 +-
include/linux/brcmphy.h | 60 +
include/linux/phy.h | 3 +
15 files changed, 4247 insertions(+), 53 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt
create mode 100644 drivers/net/ethernet/broadcom/genet/Makefile
create mode 100644 drivers/net/ethernet/broadcom/genet/bcmgenet.c
create mode 100644 drivers/net/ethernet/broadcom/genet/bcmgenet.h
create mode 100644 drivers/net/ethernet/broadcom/genet/bcmmii.c
create mode 100644 drivers/net/phy/bcm7xxx.c
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
romieu-W8zweXLXuWQS+FvcfC7Uqw@public.gmane.org,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH net-next v5 00/10] Support for the Broadcom GENET driver
Date: Thu, 13 Feb 2014 16:08:41 -0800 [thread overview]
Message-ID: <1392336531-28875-1-git-send-email-f.fainelli@gmail.com> (raw)
This patchset adds support for the Broadcom GENET Gigabit Ethernet MAC
controller. This controller is found on the Broadcom BCM7xxx Set Top Box
System-on-a-chips.
Changes since v4:
- add dependency on CONFIG_OF
Changes since v3:
- fixed Kconfig dependency on FIXED_PHY
Changes since v2:
- dropped the patch that adds an "internal" phy-mode
Florian Fainelli (10):
net: phy: add MoCA PHY type
net: phy: update port type for MoCA PHYs
net: phy: broadcom: extract register definitions
net: phy: add Broadcom BCM7xxx internal PHY driver
net: bcmgenet: add driver definitions and private structure
net: bcmgenet: add main driver file
net: bcmgenet: add MDIO routines
net: bcmgenet: hook into the build system
Documentation: add Device tree bindings for Broadcom GENET
MAINTAINERS: add entry for the Broadcom GENET driver
.../devicetree/bindings/net/broadcom-bcmgenet.txt | 121 +
MAINTAINERS | 6 +
drivers/net/ethernet/broadcom/Kconfig | 11 +
drivers/net/ethernet/broadcom/Makefile | 1 +
drivers/net/ethernet/broadcom/genet/Makefile | 2 +
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2595 ++++++++++++++++++++
drivers/net/ethernet/broadcom/genet/bcmgenet.h | 630 +++++
drivers/net/ethernet/broadcom/genet/bcmmii.c | 464 ++++
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/bcm7xxx.c | 343 +++
drivers/net/phy/broadcom.c | 52 -
drivers/net/phy/phy.c | 5 +-
include/linux/brcmphy.h | 60 +
include/linux/phy.h | 3 +
15 files changed, 4247 insertions(+), 53 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt
create mode 100644 drivers/net/ethernet/broadcom/genet/Makefile
create mode 100644 drivers/net/ethernet/broadcom/genet/bcmgenet.c
create mode 100644 drivers/net/ethernet/broadcom/genet/bcmgenet.h
create mode 100644 drivers/net/ethernet/broadcom/genet/bcmmii.c
create mode 100644 drivers/net/phy/bcm7xxx.c
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2014-02-14 0:08 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-14 0:08 Florian Fainelli [this message]
2014-02-14 0:08 ` [PATCH net-next v5 00/10] Support for the Broadcom GENET driver Florian Fainelli
2014-02-14 0:08 ` [PATCH net-next v5 01/10] net: phy: add MoCA PHY type Florian Fainelli
2014-02-14 0:08 ` Florian Fainelli
2014-02-14 0:08 ` [PATCH net-next v5 02/10] net: phy: update port type for MoCA PHYs Florian Fainelli
2014-02-14 0:08 ` Florian Fainelli
2014-02-14 0:08 ` [PATCH net-next v5 03/10] net: phy: broadcom: extract register definitions Florian Fainelli
2014-02-14 0:08 ` Florian Fainelli
2014-02-14 0:08 ` [PATCH net-next v5 04/10] net: phy: add Broadcom BCM7xxx internal PHY driver Florian Fainelli
2014-02-14 0:08 ` Florian Fainelli
2014-02-14 0:08 ` [PATCH net-next v5 05/10] net: bcmgenet: add driver definitions and private structure Florian Fainelli
2014-02-14 0:08 ` Florian Fainelli
2014-02-14 0:08 ` [PATCH net-next v5 06/10] net: bcmgenet: add main driver file Florian Fainelli
2014-02-14 0:08 ` Florian Fainelli
2014-02-14 0:08 ` [PATCH net-next v5 07/10] net: bcmgenet: add MDIO routines Florian Fainelli
2014-02-14 0:08 ` Florian Fainelli
2014-02-14 0:08 ` [PATCH net-next v5 09/10] Documentation: add Device tree bindings for Broadcom GENET Florian Fainelli
2014-02-14 0:08 ` Florian Fainelli
2014-02-14 10:19 ` Mark Rutland
2014-02-14 17:36 ` Florian Fainelli
2014-02-17 23:10 ` Sergei Shtylyov
2014-02-17 22:18 ` Florian Fainelli
2014-02-14 0:08 ` [PATCH net-next v5 10/10] MAINTAINERS: add entry for the Broadcom GENET driver Florian Fainelli
2014-02-14 0:08 ` Florian Fainelli
2014-02-14 21:37 ` Sergei Shtylyov
[not found] ` <1392336531-28875-1-git-send-email-f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-02-14 0:08 ` [PATCH net-next v5 08/10] net: bcmgenet: hook into the build system Florian Fainelli
2014-02-14 0:08 ` Florian Fainelli
2014-02-14 5:29 ` [PATCH net-next v5 00/10] Support for the Broadcom GENET driver David Miller
2014-02-14 7:07 ` Florian Fainelli
2014-02-14 9:19 ` Richard Cochran
2014-02-16 18:34 ` Florian Fainelli
2014-02-18 7:37 ` Richard Cochran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392336531-28875-1-git-send-email-f.fainelli@gmail.com \
--to=f.fainelli-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=romieu-W8zweXLXuWQS+FvcfC7Uqw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.