* [U-Boot] [PATCH v1 1/3] OMAP3: add missing gpio clock init and fix NAND SPL for mcx board
@ 2014-02-14 11:51 Stefano Babic
2014-02-14 11:51 ` [U-Boot] [PATCH v1 2/3] omap3: fix pinmux " Stefano Babic
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Stefano Babic @ 2014-02-14 11:51 UTC (permalink / raw)
To: u-boot
Patch contains the same fixes as commit
4b9b2c300a23ca4a85811918dc92e822a9571a87
(missing CONFIG_OMAP3_GPIO_2) and commit
f9095aac793aa8917ab9b915c5d449e6dc8d3d30 (missing CONFIG_SPL_NAND_SOFTECC).
Same issues are relevant for the mcx board, too.
Signed-off-by: Stefano Babic <sbabic@denx.de>
---
include/configs/mcx.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index dcd29ce..209c2bb 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -98,6 +98,7 @@
/* EHCI */
#define CONFIG_USB_STORAGE
+#define CONFIG_OMAP3_GPIO_2
#define CONFIG_OMAP3_GPIO_5
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_OMAP
@@ -395,6 +396,7 @@
#define CONFIG_SYS_NAND_ECCSIZE 256
#define CONFIG_SYS_NAND_ECCBYTES 3
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW
+#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread* [U-Boot] [PATCH v1 2/3] omap3: fix pinmux for mcx board
2014-02-14 11:51 [U-Boot] [PATCH v1 1/3] OMAP3: add missing gpio clock init and fix NAND SPL for mcx board Stefano Babic
@ 2014-02-14 11:51 ` Stefano Babic
2014-02-21 19:16 ` [U-Boot] [U-Boot,v1,2/3] " Tom Rini
2014-02-14 11:51 ` [U-Boot] [PATCH v1 3/3] OMAP3: fix default environment " Stefano Babic
2014-02-21 19:15 ` [U-Boot] [U-Boot, v1, 1/3] OMAP3: add missing gpio clock init and fix NAND SPL " Tom Rini
2 siblings, 1 reply; 6+ messages in thread
From: Stefano Babic @ 2014-02-14 11:51 UTC (permalink / raw)
To: u-boot
New hardware version cannot recognize the SD-Card
because the SYS_NRESWARM, set as GPIO, does not
guarantee the required reset time.
Change the pin function back to enable the
SYS_NRESWARM signal driven by the SOC.
Signed-off-by: Stefano Babic <sbabic@denx.de>
---
board/htkw/mcx/mcx.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h
index 703dbec..17c122c 100644
--- a/board/htkw/mcx/mcx.h
+++ b/board/htkw/mcx/mcx.h
@@ -325,8 +325,6 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_32K), (IEN | PTD | EN | M4)) \
MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(SYS_NIRQ), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(SYS_NRESWARM), (IEN | PTU | DIS | M4)) \
- /* SYS_nRESWARM */\
MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) \
MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) \
MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) \
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread* [U-Boot] [PATCH v1 3/3] OMAP3: fix default environment for mcx board
2014-02-14 11:51 [U-Boot] [PATCH v1 1/3] OMAP3: add missing gpio clock init and fix NAND SPL for mcx board Stefano Babic
2014-02-14 11:51 ` [U-Boot] [PATCH v1 2/3] omap3: fix pinmux " Stefano Babic
@ 2014-02-14 11:51 ` Stefano Babic
2014-02-21 19:16 ` [U-Boot] [U-Boot, v1, " Tom Rini
2014-02-21 19:15 ` [U-Boot] [U-Boot, v1, 1/3] OMAP3: add missing gpio clock init and fix NAND SPL " Tom Rini
2 siblings, 1 reply; 6+ messages in thread
From: Stefano Babic @ 2014-02-14 11:51 UTC (permalink / raw)
To: u-boot
Patch allows to load a script at the startup from MMC.
Signed-off-by: Stefano Babic <sbabic@denx.de>
---
include/configs/mcx.h | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 209c2bb..7c5c2f4 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -264,10 +264,9 @@
"${mtdparts} " \
"vram=6M omapfb.vram=1:2M,2:2M,3:2M " \
"omapdss.def_disp=lcd;" \
- "bootm 0x82000000 0x84000000\0"
-
-#define CONFIG_BOOTCOMMAND \
- "run nandboot"
+ "bootm 0x82000000 0x84000000\0" \
+ "bootcmd=mmc rescan;if fatload mmc 0 82000000 loadbootscr.scr;" \
+ "then source 82000000;else run nandboot;fi\0"
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread* [U-Boot] [U-Boot, v1, 1/3] OMAP3: add missing gpio clock init and fix NAND SPL for mcx board
2014-02-14 11:51 [U-Boot] [PATCH v1 1/3] OMAP3: add missing gpio clock init and fix NAND SPL for mcx board Stefano Babic
2014-02-14 11:51 ` [U-Boot] [PATCH v1 2/3] omap3: fix pinmux " Stefano Babic
2014-02-14 11:51 ` [U-Boot] [PATCH v1 3/3] OMAP3: fix default environment " Stefano Babic
@ 2014-02-21 19:15 ` Tom Rini
2 siblings, 0 replies; 6+ messages in thread
From: Tom Rini @ 2014-02-21 19:15 UTC (permalink / raw)
To: u-boot
On Fri, Feb 14, 2014 at 12:51:25PM +0100, Stefano Babic wrote:
> Patch contains the same fixes as commit
> 4b9b2c300a23ca4a85811918dc92e822a9571a87
> (missing CONFIG_OMAP3_GPIO_2) and commit
> f9095aac793aa8917ab9b915c5d449e6dc8d3d30 (missing CONFIG_SPL_NAND_SOFTECC).
> Same issues are relevant for the mcx board, too.
>
> Signed-off-by: Stefano Babic <sbabic@denx.de>
Applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140221/72deb600/attachment.pgp>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-02-21 19:16 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-14 11:51 [U-Boot] [PATCH v1 1/3] OMAP3: add missing gpio clock init and fix NAND SPL for mcx board Stefano Babic
2014-02-14 11:51 ` [U-Boot] [PATCH v1 2/3] omap3: fix pinmux " Stefano Babic
2014-02-21 19:16 ` [U-Boot] [U-Boot,v1,2/3] " Tom Rini
2014-02-14 11:51 ` [U-Boot] [PATCH v1 3/3] OMAP3: fix default environment " Stefano Babic
2014-02-21 19:16 ` [U-Boot] [U-Boot, v1, " Tom Rini
2014-02-21 19:15 ` [U-Boot] [U-Boot, v1, 1/3] OMAP3: add missing gpio clock init and fix NAND SPL " Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.