* [PATCH v2 0/4] DT support for kirkwood based Synology NAS boxes
@ 2014-02-15 11:01 ` Andrew Lunn
0 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2014-02-15 11:01 UTC (permalink / raw)
To: Jason Cooper; +Cc: linux ARM, devicetree-u79uwXL29TY76Z2rM5mHXA, Andrew Lunn
This patchset adds support for around 30 kirkwood bases Synology NAS
boxes. Patch #1 generalized the qnap power off driver so that i can
also be used for Synology devices. Patch #2 and #3 document vendor
prefixes and i2c trivial devices. Patch #4 adds the synology DT files.
v2:
Typo fix in qnap-poweroff.c
Use ricoy stock ticker instead of ricoh
Describe the lego structure of the hardware
Andrew Lunn (4):
Power: Reset: Generalize qnap-poweroff to with on Synology devices.
DT: Vender prefixes: Add ricoh, ssi and synology
DT: i2c: Trivial: Add sii,s35390a, fix ricoh vendor prefix
ARM: Kirkwood: Add support for many Synology NAS devices
.../devicetree/bindings/i2c/trivial-devices.txt | 3 +-
.../bindings/power_supply/qnap-poweroff.txt | 5 +-
.../devicetree/bindings/vendor-prefixes.txt | 3 +
arch/arm/boot/dts/Makefile | 15 +++
arch/arm/boot/dts/kirkwood-ds109.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-ds110jv10.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-ds111.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-ds112.dts | 34 +++++++
arch/arm/boot/dts/kirkwood-ds209.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-ds210.dts | 35 +++++++
arch/arm/boot/dts/kirkwood-ds212.dts | 37 +++++++
arch/arm/boot/dts/kirkwood-ds212j.dts | 34 +++++++
arch/arm/boot/dts/kirkwood-ds409.dts | 34 +++++++
arch/arm/boot/dts/kirkwood-ds409slim.dts | 32 ++++++
arch/arm/boot/dts/kirkwood-ds411.dts | 35 +++++++
arch/arm/boot/dts/kirkwood-ds411j.dts | 34 +++++++
arch/arm/boot/dts/kirkwood-ds411slim.dts | 34 +++++++
arch/arm/boot/dts/kirkwood-rs212.dts | 34 +++++++
arch/arm/boot/dts/kirkwood-rs409.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-rs411.dts | 34 +++++++
arch/arm/boot/dts/synology/alarm-led-12.dtsi | 28 ++++++
arch/arm/boot/dts/synology/common.dtsi | 112 +++++++++++++++++++++
arch/arm/boot/dts/synology/ethernet-1.dtsi | 15 +++
arch/arm/boot/dts/synology/fan-alarm-18.dtsi | 22 ++++
arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi | 22 ++++
arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi | 32 ++++++
arch/arm/boot/dts/synology/fan-gpios-15.dtsi | 34 +++++++
arch/arm/boot/dts/synology/fan-gpios-32.dtsi | 34 +++++++
arch/arm/boot/dts/synology/fan-speed-100.dtsi | 20 ++++
arch/arm/boot/dts/synology/fan-speed-120.dtsi | 20 ++++
arch/arm/boot/dts/synology/fan-speed-150.dtsi | 20 ++++
arch/arm/boot/dts/synology/hdd-leds-20.dtsi | 90 +++++++++++++++++
arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi | 36 +++++++
arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi | 52 ++++++++++
arch/arm/boot/dts/synology/hdd-leds-36.dtsi | 103 +++++++++++++++++++
arch/arm/boot/dts/synology/hdd-leds-38.dtsi | 52 ++++++++++
arch/arm/boot/dts/synology/hdd-power-29.dtsi | 56 +++++++++++
arch/arm/boot/dts/synology/hdd-power-30-1.dtsi | 40 ++++++++
arch/arm/boot/dts/synology/hdd-power-30-2.dtsi | 56 +++++++++++
arch/arm/boot/dts/synology/hdd-power-30-4.dtsi | 89 ++++++++++++++++
arch/arm/boot/dts/synology/hdd-power-31.dtsi | 40 ++++++++
arch/arm/boot/dts/synology/hdd-power-34.dtsi | 73 ++++++++++++++
arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi | 18 ++++
arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi | 18 ++++
arch/arm/boot/dts/synology/pcie-2.dtsi | 19 ++++
drivers/power/reset/qnap-poweroff.c | 46 +++++++--
46 files changed, 1703 insertions(+), 12 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
create mode 100644 arch/arm/boot/dts/synology/alarm-led-12.dtsi
create mode 100644 arch/arm/boot/dts/synology/common.dtsi
create mode 100644 arch/arm/boot/dts/synology/ethernet-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-18.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-gpios-15.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-gpios-32.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-100.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-120.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-150.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-20.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-36.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-38.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-29.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-2.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-4.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-31.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-34.dtsi
create mode 100644 arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi
create mode 100644 arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi
create mode 100644 arch/arm/boot/dts/synology/pcie-2.dtsi
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 0/4] DT support for kirkwood based Synology NAS boxes
@ 2014-02-15 11:01 ` Andrew Lunn
0 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2014-02-15 11:01 UTC (permalink / raw)
To: linux-arm-kernel
This patchset adds support for around 30 kirkwood bases Synology NAS
boxes. Patch #1 generalized the qnap power off driver so that i can
also be used for Synology devices. Patch #2 and #3 document vendor
prefixes and i2c trivial devices. Patch #4 adds the synology DT files.
v2:
Typo fix in qnap-poweroff.c
Use ricoy stock ticker instead of ricoh
Describe the lego structure of the hardware
Andrew Lunn (4):
Power: Reset: Generalize qnap-poweroff to with on Synology devices.
DT: Vender prefixes: Add ricoh, ssi and synology
DT: i2c: Trivial: Add sii,s35390a, fix ricoh vendor prefix
ARM: Kirkwood: Add support for many Synology NAS devices
.../devicetree/bindings/i2c/trivial-devices.txt | 3 +-
.../bindings/power_supply/qnap-poweroff.txt | 5 +-
.../devicetree/bindings/vendor-prefixes.txt | 3 +
arch/arm/boot/dts/Makefile | 15 +++
arch/arm/boot/dts/kirkwood-ds109.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-ds110jv10.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-ds111.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-ds112.dts | 34 +++++++
arch/arm/boot/dts/kirkwood-ds209.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-ds210.dts | 35 +++++++
arch/arm/boot/dts/kirkwood-ds212.dts | 37 +++++++
arch/arm/boot/dts/kirkwood-ds212j.dts | 34 +++++++
arch/arm/boot/dts/kirkwood-ds409.dts | 34 +++++++
arch/arm/boot/dts/kirkwood-ds409slim.dts | 32 ++++++
arch/arm/boot/dts/kirkwood-ds411.dts | 35 +++++++
arch/arm/boot/dts/kirkwood-ds411j.dts | 34 +++++++
arch/arm/boot/dts/kirkwood-ds411slim.dts | 34 +++++++
arch/arm/boot/dts/kirkwood-rs212.dts | 34 +++++++
arch/arm/boot/dts/kirkwood-rs409.dts | 33 ++++++
arch/arm/boot/dts/kirkwood-rs411.dts | 34 +++++++
arch/arm/boot/dts/synology/alarm-led-12.dtsi | 28 ++++++
arch/arm/boot/dts/synology/common.dtsi | 112 +++++++++++++++++++++
arch/arm/boot/dts/synology/ethernet-1.dtsi | 15 +++
arch/arm/boot/dts/synology/fan-alarm-18.dtsi | 22 ++++
arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi | 22 ++++
arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi | 32 ++++++
arch/arm/boot/dts/synology/fan-gpios-15.dtsi | 34 +++++++
arch/arm/boot/dts/synology/fan-gpios-32.dtsi | 34 +++++++
arch/arm/boot/dts/synology/fan-speed-100.dtsi | 20 ++++
arch/arm/boot/dts/synology/fan-speed-120.dtsi | 20 ++++
arch/arm/boot/dts/synology/fan-speed-150.dtsi | 20 ++++
arch/arm/boot/dts/synology/hdd-leds-20.dtsi | 90 +++++++++++++++++
arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi | 36 +++++++
arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi | 52 ++++++++++
arch/arm/boot/dts/synology/hdd-leds-36.dtsi | 103 +++++++++++++++++++
arch/arm/boot/dts/synology/hdd-leds-38.dtsi | 52 ++++++++++
arch/arm/boot/dts/synology/hdd-power-29.dtsi | 56 +++++++++++
arch/arm/boot/dts/synology/hdd-power-30-1.dtsi | 40 ++++++++
arch/arm/boot/dts/synology/hdd-power-30-2.dtsi | 56 +++++++++++
arch/arm/boot/dts/synology/hdd-power-30-4.dtsi | 89 ++++++++++++++++
arch/arm/boot/dts/synology/hdd-power-31.dtsi | 40 ++++++++
arch/arm/boot/dts/synology/hdd-power-34.dtsi | 73 ++++++++++++++
arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi | 18 ++++
arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi | 18 ++++
arch/arm/boot/dts/synology/pcie-2.dtsi | 19 ++++
drivers/power/reset/qnap-poweroff.c | 46 +++++++--
46 files changed, 1703 insertions(+), 12 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
create mode 100644 arch/arm/boot/dts/synology/alarm-led-12.dtsi
create mode 100644 arch/arm/boot/dts/synology/common.dtsi
create mode 100644 arch/arm/boot/dts/synology/ethernet-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-18.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-gpios-15.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-gpios-32.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-100.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-120.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-150.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-20.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-36.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-38.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-29.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-2.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-4.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-31.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-34.dtsi
create mode 100644 arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi
create mode 100644 arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi
create mode 100644 arch/arm/boot/dts/synology/pcie-2.dtsi
--
1.8.5.3
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 1/4] Power: Reset: Generalize qnap-poweroff to with on Synology devices.
2014-02-15 11:01 ` Andrew Lunn
@ 2014-02-15 11:01 ` Andrew Lunn
-1 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2014-02-15 11:01 UTC (permalink / raw)
To: Jason Cooper
Cc: linux ARM, devicetree-u79uwXL29TY76Z2rM5mHXA, Andrew Lunn,
Anton Vorontsov, Dmitry Eremin-Solenikov, David Woodhouse
The Synology NAS devices use a very similar mechanism to QNAP NAS
devices to power off. Both send a single charactor command to a PIC,
over the second serial port. However the baud rate and the command
differ. Generalize the driver to support this.
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
Cc: Anton Vorontsov <anton-9xeibp6oKSgdnm+yROfE0A@public.gmane.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
---
v2:
s/9660/9600
---
.../bindings/power_supply/qnap-poweroff.txt | 5 ++-
drivers/power/reset/qnap-poweroff.c | 46 +++++++++++++++++-----
2 files changed, 40 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index 0347d8350d94..af25e77c0e0c 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
microcontroller to turn the power off. This driver adds a handler to
pm_power_off which is called to turn the power off.
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"
- reg: Address and length of the register set for UART1
- clocks: tclk clock
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
index 37f56f7ee926..10c91fa2466c 100644
--- a/drivers/power/reset/qnap-poweroff.c
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -1,5 +1,5 @@
/*
- * QNAP Turbo NAS Board power off
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
*
* Copyright (C) 2012 Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
*
@@ -25,17 +25,42 @@
#define UART1_REG(x) (base + ((UART_##x) << 2))
+struct power_off_cfg {
+ u32 baud;
+ char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+ .baud = 19200,
+ .cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {
+ .baud = 9600,
+ .cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+ { .compatible = "qnap,power-off",
+ .data = (void *) &qnap_power_off_cfg,
+ },
+ { .compatible = "synology,power-off",
+ .data = (void *) &synology_power_off_cfg,
+ },
+ {}
+};
+
static void __iomem *base;
static unsigned long tclk;
+static struct power_off_cfg *cfg;
static void qnap_power_off(void)
{
- /* 19200 baud divisor */
- const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+ const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
pr_err("%s: triggering power-off...\n", __func__);
- /* hijack UART1 and reset into sane state (19200,8n1) */
+ /* hijack UART1 and reset into sane state */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
@@ -44,16 +69,21 @@ static void qnap_power_off(void)
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
- /* send the power-off command 'A' to PIC */
- writel('A', UART1_REG(TX));
+ /* send the power-off command to PIC */
+ writel(cfg->cmd, UART1_REG(TX));
}
static int qnap_power_off_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct resource *res;
struct clk *clk;
char symname[KSYM_NAME_LEN];
+ const struct of_device_id *match =
+ of_match_node(qnap_power_off_of_match_table, np);
+ cfg = (struct power_off_cfg *)match->data;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Missing resource");
@@ -94,10 +124,6 @@ static int qnap_power_off_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id qnap_power_off_of_match_table[] = {
- { .compatible = "qnap,power-off", },
- {}
-};
MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
static struct platform_driver qnap_power_off_driver = {
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 1/4] Power: Reset: Generalize qnap-poweroff to with on Synology devices.
@ 2014-02-15 11:01 ` Andrew Lunn
0 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2014-02-15 11:01 UTC (permalink / raw)
To: linux-arm-kernel
The Synology NAS devices use a very similar mechanism to QNAP NAS
devices to power off. Both send a single charactor command to a PIC,
over the second serial port. However the baud rate and the command
differ. Generalize the driver to support this.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
---
v2:
s/9660/9600
---
.../bindings/power_supply/qnap-poweroff.txt | 5 ++-
drivers/power/reset/qnap-poweroff.c | 46 +++++++++++++++++-----
2 files changed, 40 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
index 0347d8350d94..af25e77c0e0c 100644
--- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
microcontroller to turn the power off. This driver adds a handler to
pm_power_off which is called to turn the power off.
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"
- reg: Address and length of the register set for UART1
- clocks: tclk clock
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
index 37f56f7ee926..10c91fa2466c 100644
--- a/drivers/power/reset/qnap-poweroff.c
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -1,5 +1,5 @@
/*
- * QNAP Turbo NAS Board power off
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
*
* Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
*
@@ -25,17 +25,42 @@
#define UART1_REG(x) (base + ((UART_##x) << 2))
+struct power_off_cfg {
+ u32 baud;
+ char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+ .baud = 19200,
+ .cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {
+ .baud = 9600,
+ .cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+ { .compatible = "qnap,power-off",
+ .data = (void *) &qnap_power_off_cfg,
+ },
+ { .compatible = "synology,power-off",
+ .data = (void *) &synology_power_off_cfg,
+ },
+ {}
+};
+
static void __iomem *base;
static unsigned long tclk;
+static struct power_off_cfg *cfg;
static void qnap_power_off(void)
{
- /* 19200 baud divisor */
- const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+ const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
pr_err("%s: triggering power-off...\n", __func__);
- /* hijack UART1 and reset into sane state (19200,8n1) */
+ /* hijack UART1 and reset into sane state */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
@@ -44,16 +69,21 @@ static void qnap_power_off(void)
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
- /* send the power-off command 'A' to PIC */
- writel('A', UART1_REG(TX));
+ /* send the power-off command to PIC */
+ writel(cfg->cmd, UART1_REG(TX));
}
static int qnap_power_off_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct resource *res;
struct clk *clk;
char symname[KSYM_NAME_LEN];
+ const struct of_device_id *match =
+ of_match_node(qnap_power_off_of_match_table, np);
+ cfg = (struct power_off_cfg *)match->data;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Missing resource");
@@ -94,10 +124,6 @@ static int qnap_power_off_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id qnap_power_off_of_match_table[] = {
- { .compatible = "qnap,power-off", },
- {}
-};
MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
static struct platform_driver qnap_power_off_driver = {
--
1.8.5.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 2/4] DT: Vender prefixes: Add ricoh, ssi and synology
2014-02-15 11:01 ` Andrew Lunn
@ 2014-02-15 11:01 ` Andrew Lunn
-1 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2014-02-15 11:01 UTC (permalink / raw)
To: Jason Cooper; +Cc: linux ARM, devicetree-u79uwXL29TY76Z2rM5mHXA, Andrew Lunn
The following patches make use of vendor names ricoh, ssi and
synology. Add them to the vendor prefix list.
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 3f900cd51bf0..9cef5cad9019 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -69,6 +69,7 @@ ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
realtek Realtek Semiconductor Corp.
renesas Renesas Electronics Corporation
+ricoy Ricoh Co. Ltd.
rockchip Fuzhou Rockchip Electronics Co., Ltd
samsung Samsung Semiconductor
sbs Smart Battery System
@@ -76,11 +77,13 @@ schindler Schindler
sil Silicon Image
silabs Silicon Laboratories
simtek
+sii Seiko Instruments, Inc.
sirf SiRF Technology, Inc.
snps Synopsys, Inc.
st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
+synology Synology, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility
toshiba Toshiba Corporation
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 2/4] DT: Vender prefixes: Add ricoh, ssi and synology
@ 2014-02-15 11:01 ` Andrew Lunn
0 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2014-02-15 11:01 UTC (permalink / raw)
To: linux-arm-kernel
The following patches make use of vendor names ricoh, ssi and
synology. Add them to the vendor prefix list.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 3f900cd51bf0..9cef5cad9019 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -69,6 +69,7 @@ ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
realtek Realtek Semiconductor Corp.
renesas Renesas Electronics Corporation
+ricoy Ricoh Co. Ltd.
rockchip Fuzhou Rockchip Electronics Co., Ltd
samsung Samsung Semiconductor
sbs Smart Battery System
@@ -76,11 +77,13 @@ schindler Schindler
sil Silicon Image
silabs Silicon Laboratories
simtek
+sii Seiko Instruments, Inc.
sirf SiRF Technology, Inc.
snps Synopsys, Inc.
st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
+synology Synology, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility
toshiba Toshiba Corporation
--
1.8.5.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 3/4] DT: i2c: Trivial: Add sii,s35390a, fix ricoh vendor prefix
2014-02-15 11:01 ` Andrew Lunn
@ 2014-02-15 11:01 ` Andrew Lunn
-1 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2014-02-15 11:01 UTC (permalink / raw)
To: Jason Cooper; +Cc: linux ARM, devicetree-u79uwXL29TY76Z2rM5mHXA, Andrew Lunn
Add the Seiko Instruments Inc S35390a to the list of trivial i2c
devices. At the same time, correct the vendor prefix for ricoh, which
should be the ticker symbol ricoy.
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
---
Documentation/devicetree/bindings/i2c/trivial-devices.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 1a1ac2e560e9..5f371914a93b 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -56,8 +56,9 @@ ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI an
pericom,pt7c4338 Real-time Clock Module
plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
ramtron,24c64 i2c serial eeprom (24cxx)
-ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoy,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
+sii,s35390a 2-wire CMOS real-time clock
st-micro,24c256 i2c serial eeprom (24cxx)
stm,m41t00 Serial Access TIMEKEEPER
stm,m41t62 Serial real-time clock (RTC) with alarm
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 3/4] DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix
@ 2014-02-15 11:01 ` Andrew Lunn
0 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2014-02-15 11:01 UTC (permalink / raw)
To: linux-arm-kernel
Add the Seiko Instruments Inc S35390a to the list of trivial i2c
devices. At the same time, correct the vendor prefix for ricoh, which
should be the ticker symbol ricoy.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
---
Documentation/devicetree/bindings/i2c/trivial-devices.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 1a1ac2e560e9..5f371914a93b 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -56,8 +56,9 @@ ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI an
pericom,pt7c4338 Real-time Clock Module
plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
ramtron,24c64 i2c serial eeprom (24cxx)
-ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoy,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
+sii,s35390a 2-wire CMOS real-time clock
st-micro,24c256 i2c serial eeprom (24cxx)
stm,m41t00 Serial Access TIMEKEEPER
stm,m41t62 Serial real-time clock (RTC) with alarm
--
1.8.5.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 4/4] ARM: Kirkwood: Add support for many Synology NAS devices
2014-02-15 11:01 ` Andrew Lunn
@ 2014-02-15 11:01 ` Andrew Lunn
-1 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2014-02-15 11:01 UTC (permalink / raw)
To: Jason Cooper
Cc: linux ARM, devicetree-u79uwXL29TY76Z2rM5mHXA, Andrew Lunn, Ben Peddell
Add device tree fragments and files to support many of the kirkwood
based Synology NAS devices. This is a translation of the board setup
file maintained by Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
Synology hardware is designed like lego. There are two RTC blocks,
three fan alarm blocks, four led blocks, etc. To build a product, a
common base is taken, and then blocks added. This is reflected in the
DT description. Each block has a .dtsi file. The common part is also
described in a .dtsi file. Each board dts file then just includes the
common and needed blocks.
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Tested by Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
cc: Ben Peddell <klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org>
---
v2:
Fix gpio's which should be gpo.
Rebase onto v3-14-rc1
Update RTC nodes with vendor name.
Update SPI flash node with vendor name.
Add a description of the lego
Use ricoy, i.e. the stock ticker
---
arch/arm/boot/dts/Makefile | 15 ++++
arch/arm/boot/dts/kirkwood-ds109.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-ds110jv10.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-ds111.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-ds112.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-ds209.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-ds210.dts | 35 ++++++++
arch/arm/boot/dts/kirkwood-ds212.dts | 37 ++++++++
arch/arm/boot/dts/kirkwood-ds212j.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-ds409.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-ds409slim.dts | 32 +++++++
arch/arm/boot/dts/kirkwood-ds411.dts | 35 ++++++++
arch/arm/boot/dts/kirkwood-ds411j.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-ds411slim.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-rs212.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-rs409.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-rs411.dts | 34 ++++++++
arch/arm/boot/dts/synology/alarm-led-12.dtsi | 28 +++++++
arch/arm/boot/dts/synology/common.dtsi | 112 +++++++++++++++++++++++++
arch/arm/boot/dts/synology/ethernet-1.dtsi | 15 ++++
arch/arm/boot/dts/synology/fan-alarm-18.dtsi | 22 +++++
arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi | 22 +++++
arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi | 32 +++++++
arch/arm/boot/dts/synology/fan-gpios-15.dtsi | 34 ++++++++
arch/arm/boot/dts/synology/fan-gpios-32.dtsi | 34 ++++++++
arch/arm/boot/dts/synology/fan-speed-100.dtsi | 20 +++++
arch/arm/boot/dts/synology/fan-speed-120.dtsi | 20 +++++
arch/arm/boot/dts/synology/fan-speed-150.dtsi | 20 +++++
arch/arm/boot/dts/synology/hdd-leds-20.dtsi | 90 ++++++++++++++++++++
arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi | 36 ++++++++
arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi | 52 ++++++++++++
arch/arm/boot/dts/synology/hdd-leds-36.dtsi | 103 +++++++++++++++++++++++
arch/arm/boot/dts/synology/hdd-leds-38.dtsi | 52 ++++++++++++
arch/arm/boot/dts/synology/hdd-power-29.dtsi | 56 +++++++++++++
arch/arm/boot/dts/synology/hdd-power-30-1.dtsi | 40 +++++++++
arch/arm/boot/dts/synology/hdd-power-30-2.dtsi | 56 +++++++++++++
arch/arm/boot/dts/synology/hdd-power-30-4.dtsi | 89 ++++++++++++++++++++
arch/arm/boot/dts/synology/hdd-power-31.dtsi | 40 +++++++++
arch/arm/boot/dts/synology/hdd-power-34.dtsi | 73 ++++++++++++++++
arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi | 18 ++++
arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi | 18 ++++
arch/arm/boot/dts/synology/pcie-2.dtsi | 19 +++++
42 files changed, 1658 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
create mode 100644 arch/arm/boot/dts/synology/alarm-led-12.dtsi
create mode 100644 arch/arm/boot/dts/synology/common.dtsi
create mode 100644 arch/arm/boot/dts/synology/ethernet-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-18.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-gpios-15.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-gpios-32.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-100.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-120.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-150.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-20.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-36.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-38.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-29.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-2.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-4.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-31.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-34.dtsi
create mode 100644 arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi
create mode 100644 arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi
create mode 100644 arch/arm/boot/dts/synology/pcie-2.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9d6a8b485e0..6cf3a54ef7f1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -89,6 +89,18 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
+ kirkwood-ds109.dtb \
+ kirkwood-ds110jv10.dtb \
+ kirkwood-ds111.dtb \
+ kirkwood-ds209.dtb \
+ kirkwood-ds210.dtb \
+ kirkwood-ds212.dtb \
+ kirkwood-ds212j.dtb \
+ kirkwood-ds409.dtb \
+ kirkwood-ds409slim.dtb \
+ kirkwood-ds411.dtb \
+ kirkwood-ds411j.dtb \
+ kirkwood-ds411slim.dtb \
kirkwood-goflexnet.dtb \
kirkwood-guruplug-server-plus.dtb \
kirkwood-ib62x0.dtb \
@@ -111,6 +123,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-nsa310a.dtb \
kirkwood-openblocks_a6.dtb \
kirkwood-openblocks_a7.dtb \
+ kirkwood-rs212.dtb \
+ kirkwood-rs409.dtb \
+ kirkwood-rs411.dtb \
kirkwood-sheevaplug.dtb \
kirkwood-sheevaplug-esata.dtb \
kirkwood-topkick.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts
new file mode 100644
index 000000000000..bea085ad540a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds109.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/fan-speed-150.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-1.dtsi"
+
+/ {
+ model = "Synology DS109, DS110, DS110jv20";
+ compatible = "synology,ds109", "synology,ds110jv20",
+ "synology,ds110", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
new file mode 100644
index 000000000000..d6b746952947
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-150.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-1.dtsi"
+
+/ {
+ model = "Synology DS110j v10 and v30";
+ compatible = "synology,ds110jv10", "synology,ds110jv30",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts
new file mode 100644
index 000000000000..5f51e088903f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds111.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-1.dtsi"
+
+/ {
+ model = "Synology DS111";
+ compatible = "synology,ds111", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
new file mode 100644
index 000000000000..cda3203a0824
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-30.dtsi"
+
+/ {
+ model = "Synology DS111";
+ compatible = "synology,ds111", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts
new file mode 100644
index 000000000000..b2ebb423e129
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds209.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/fan-speed-150.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-31.dtsi"
+
+/ {
+ model = "Synology DS209";
+ compatible = "synology,ds209", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts
new file mode 100644
index 000000000000..8623dd63f44d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds210.dts
@@ -0,0 +1,35 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-150.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-31.dtsi"
+
+/ {
+ model = "Synology DS210 v10, v20, v30, DS211j";
+ compatible = "synology,ds210jv10", "synology,ds210jv20",
+ "synology,ds210jv30", "synology,ds211j",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts
new file mode 100644
index 000000000000..89e091ce2174
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212.dts
@@ -0,0 +1,37 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-30-2.dtsi"
+
+/ {
+ model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
+ compatible = "synology,ds212", "synology,ds212pv10",
+ "synology,ds212pv10", "synology,ds212pv20",
+ "synology,ds213airv10", "synology,ds213v10",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts
new file mode 100644
index 000000000000..ed14b7bb695e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212j.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-29.dtsi"
+
+/ {
+ model = "Synology DS212j v10, v20";
+ compatible = "synology,ds212jv10", "synology,ds212jv20",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts
new file mode 100644
index 000000000000..7000de1add08
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-120.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-18.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+#include "synology/alarm-led-12.dtsi"
+
+/ {
+ model = "Synology DS409, DS410j";
+ compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts
new file mode 100644
index 000000000000..0ba525a594f7
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts
@@ -0,0 +1,32 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/fan-speed-120.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-20.dtsi"
+
+/ {
+ model = "Synology 409slim";
+ compatible = "synology,ds409slim", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
new file mode 100644
index 000000000000..4c1ca8e85559
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -0,0 +1,35 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+#include "synology/hdd-power-34.dtsi"
+
+/ {
+ model = "Synology DS411, DS413jv10";
+ compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts
new file mode 100644
index 000000000000..7f08a46ddabb
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411j.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-120.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-18.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+#include "synology/alarm-led-12.dtsi"
+
+/ {
+ model = "Synology DS411j";
+ compatible = "synology,ds411j", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts
new file mode 100644
index 000000000000..2e6d66f37002
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+
+/ {
+ model = "Synology DS411slim";
+ compatible = "synology,ds411slim", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
new file mode 100644
index 000000000000..edc797464983
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-3.dtsi"
+#include "synology/hdd-leds-38.dtsi"
+#include "synology/hdd-power-30-2.dtsi"
+
+/ {
+ model = "Synology RS212";
+ compatible = "synology,rs212", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts
new file mode 100644
index 000000000000..906664a99602
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs409.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-120.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-18.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+
+/ {
+ model = "Synology RS409";
+ compatible = "synology,rs409", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts
new file mode 100644
index 000000000000..75c806ea0dc9
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs411.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-3.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+
+/ {
+ model = "Synology RS411 RS812";
+ compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/alarm-led-12.dtsi b/arch/arm/boot/dts/synology/alarm-led-12.dtsi
new file mode 100644
index 000000000000..e6ea8f07d1a5
--- /dev/null
+++ b/arch/arm/boot/dts/synology/alarm-led-12.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_led_12: pmx-led-12 {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_12>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:alarm";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/common.dtsi b/arch/arm/boot/dts/synology/common.dtsi
new file mode 100644
index 000000000000..fb078c4f9a62
--- /dev/null
+++ b/arch/arm/boot/dts/synology/common.dtsi
@@ -0,0 +1,112 @@
+/*
+ * Nodes which are common to all Synology devices
+ *
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+ ocp@f1000000 {
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pmx_twsi0>;
+ pinctrl-names = "default";
+ };
+ serial@12000 {
+ status = "okay";
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
+ };
+ serial@12100 {
+ status = "okay";
+ pinctrl-0 = <&pmx_uart1>;
+ pinctrl-names = "default";
+ };
+ poweroff@12100 {
+ compatible = "synology,power-off";
+ reg = <0x12000 0x100>;
+ clocks = <&gate_clk 7>;
+ };
+ spi@10600 {
+ status = "okay";
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ mode = <0>;
+
+ partition@00000000 {
+ reg = <0x00000000 0x00080000>;
+ label = "RedBoot";
+ };
+
+ partition@00080000 {
+ reg = <0x00080000 0x00200000>;
+ label = "zImage";
+ };
+
+ partition@00280000 {
+ reg = <0x00280000 0x00140000>;
+ label = "rd.gz";
+ };
+ partition@003c0000 {
+ reg = <0x003c0000 0x00010000>;
+ label = "vendor";
+ };
+ partition@003d0000 {
+ reg = <0x003d0000 0x00020000>;
+ label = "RedBoot config";
+ };
+ partition@003f0000 {
+ reg = <0x003f0000 0x00010000>;
+ label = "FIS directory";
+ };
+ };
+ };
+ sata@80000 {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+ };
+ };
+ gpio_fan {
+ compatible = "gpio-fan";
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy {
+ device_type = "ethernet-phy";
+ reg = <8>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/ethernet-1.dtsi b/arch/arm/boot/dts/synology/ethernet-1.dtsi
new file mode 100644
index 000000000000..bf00eff53bbc
--- /dev/null
+++ b/arch/arm/boot/dts/synology/ethernet-1.dtsi
@@ -0,0 +1,15 @@
+&mdio {
+ status = "okay";
+
+ ethphy1: ethernet-phy {
+ device_type = "ethernet-phy";
+ reg = <9>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet1-port@0 {
+ phy-handle = <ðphy1>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-alarm-18.dtsi b/arch/arm/boot/dts/synology/fan-alarm-18.dtsi
new file mode 100644
index 000000000000..d323eb0d2109
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-alarm-18.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_fan_18: pmx-fan-18 {
+ marvell,pins = "mpp18";
+ marvell,function = "gpo";
+ };
+ };
+ };
+ gpio_fan {
+ alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi b/arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi
new file mode 100644
index 000000000000..12e52fdae870
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_fan_35: pmx-fan-35 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio_fan {
+ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi b/arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi
new file mode 100644
index 000000000000..e2a44f402bf0
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi
@@ -0,0 +1,32 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_fan_35: pmx-fan-35 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ pmx_fan_44: pmx-fan-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_fan_45: pmx-fan-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio_fan {
+ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+ &gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-gpios-15.dtsi b/arch/arm/boot/dts/synology/fan-gpios-15.dtsi
new file mode 100644
index 000000000000..e27cba942eed
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-gpios-15.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_fan_15: pmx-fan-15 {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+ pmx_fan_16: pmx-fan-16 {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+ pmx_fan_17: pmx-fan-17 {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio_fan {
+ pinctrl-0 = <&pmx_fan_15 &pmx_fan_16 &pmx_fan_17>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+ &gpio0 16 GPIO_ACTIVE_HIGH
+ &gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-gpios-32.dtsi b/arch/arm/boot/dts/synology/fan-gpios-32.dtsi
new file mode 100644
index 000000000000..d4fd393e71a8
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-gpios-32.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_fan_32: pmx-fan-32 {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+ pmx_fan_33: pmx-fan-33 {
+ marvell,pins = "mpp33";
+ marvell,function = "gpo";
+ };
+ pmx_fan_34: pmx-fan-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio_fan {
+ pinctrl-0 = <&pmx_fan_32 &pmx_fan_33 &pmx_fan_34>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+ &gpio1 1 GPIO_ACTIVE_HIGH
+ &gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-speed-100.dtsi b/arch/arm/boot/dts/synology/fan-speed-100.dtsi
new file mode 100644
index 000000000000..5188ba59a9b2
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-speed-100.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ gpio_fan {
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 3100 2
+ 3800 3
+ 4600 4
+ 4800 5
+ 4900 6
+ 5000 7 >;
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/fan-speed-120.dtsi b/arch/arm/boot/dts/synology/fan-speed-120.dtsi
new file mode 100644
index 000000000000..90157070492c
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-speed-120.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ gpio_fan {
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 2700 2
+ 3000 4
+ 3600 3
+ 3800 5
+ 3900 6
+ 4300 7 >;
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/fan-speed-150.dtsi b/arch/arm/boot/dts/synology/fan-speed-150.dtsi
new file mode 100644
index 000000000000..6abc36915886
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-speed-150.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ gpio_fan {
+ gpio-fan,speed-map = < 0 0
+ 2200 1
+ 2500 2
+ 3000 4
+ 3300 3
+ 3700 5
+ 3800 6
+ 4200 7 >;
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-20.dtsi b/arch/arm/boot/dts/synology/hdd-leds-20.dtsi
new file mode 100644
index 000000000000..e6663ea7014c
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-20.dtsi
@@ -0,0 +1,90 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_led_20: pmx-led-20 {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+ pmx_led_21: pmx-led-21 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+ pmx_led_22: pmx-led-22 {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+ pmx_led_23: pmx-led-23 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+ pmx_led_24: pmx-led-24 {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+ pmx_led_25: pmx-led-25 {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+ pmx_led_26: pmx-led-26 {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+ pmx_led_27: pmx-led-27 {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+ pmx_led_28: pmx-led-28 {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_20 &pmx_led_21 &pmx_led_22
+ &pmx_led_23 &pmx_led_24 &pmx_led_25
+ &pmx_led_26 &pmx_led_27>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+ hdd3-green {
+ label = "synology:green:hdd3";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+ hdd3-amber {
+ label = "synology:amber:hdd3";
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ };
+ hdd4-green {
+ label = "synology:green:hdd4";
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ };
+ hdd4-amber {
+ label = "synology:amber:hdd4";
+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi b/arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi
new file mode 100644
index 000000000000..034323f9ffb0
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi
@@ -0,0 +1,36 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_led_21: pmx-led-21 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+ pmx_led_23: pmx-led-23 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_21 &pmx_led_23>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi b/arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi
new file mode 100644
index 000000000000..446a28f2200b
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_led_20: pmx-led-20 {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+ pmx_led_21: pmx-led-21 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+ pmx_led_22: pmx-led-22 {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+ pmx_led_23: pmx-led-23 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_21 &pmx_led_23 &pmx_led_20 &pmx_led_22>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-36.dtsi b/arch/arm/boot/dts/synology/hdd-leds-36.dtsi
new file mode 100644
index 000000000000..9541c0c943e6
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-36.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_led_36: pmx-led-36 {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_led_37: pmx-led-37 {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ pmx_led_38: pmx-led-38 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_39: pmx-led-39 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_led_40: pmx-led-40 {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+ pmx_led_41: pmx-led-41 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_led_42: pmx-led-42 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_led_43: pmx-led-43 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_led_44: pmx-led-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_led_45: pmx-led-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_36 &pmx_led_37 &pmx_led_38
+ &pmx_led_39 &pmx_led_40 &pmx_led_41
+ &pmx_led_42 &pmx_led_43 &pmx_led_44
+ &pmx_led_45>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+ hdd3-green {
+ label = "synology:green:hdd3";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+ hdd3-amber {
+ label = "synology:amber:hdd3";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+ hdd4-green {
+ label = "synology:green:hdd4";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+ hdd4-amber {
+ label = "synology:amber:hdd4";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+ hdd5-green {
+ label = "synology:green:hdd5";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ hdd5-amber {
+ label = "synology:amber:hdd5";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-38.dtsi b/arch/arm/boot/dts/synology/hdd-leds-38.dtsi
new file mode 100644
index 000000000000..d2fe351a0808
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-38.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_led_38: pmx-led-38 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_39: pmx-led-39 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_led_36: pmx-led-36 {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_led_37: pmx-led-37 {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_38 &pmx_led_39 &pmx_led_36 &pmx_led_37>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-29.dtsi b/arch/arm/boot/dts/synology/hdd-power-29.dtsi
new file mode 100644
index 000000000000..8b08c86ab942
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-29.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+ pinctrl-names = "default";
+
+ hdd1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ hdd2_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-30-1.dtsi b/arch/arm/boot/dts/synology/hdd-power-30-1.dtsi
new file mode 100644
index 000000000000..b0998d4e231f
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-30-1.dtsi
@@ -0,0 +1,40 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30>;
+ pinctrl-names = "default";
+
+ hdd1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-30-2.dtsi b/arch/arm/boot/dts/synology/hdd-power-30-2.dtsi
new file mode 100644
index 000000000000..766e6352d5af
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-30-2.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+ pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+ pinctrl-names = "default";
+
+ hdd1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+ hdd2_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-30-4.dtsi b/arch/arm/boot/dts/synology/hdd-power-30-4.dtsi
new file mode 100644
index 000000000000..5bbced207965
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-30-4.dtsi
@@ -0,0 +1,89 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+ pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+ &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+ pinctrl-names = "default";
+
+ hdd1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+ hdd2_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ hdd3_power: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+ hdd4_power: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 32 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-31.dtsi b/arch/arm/boot/dts/synology/hdd-power-31.dtsi
new file mode 100644
index 000000000000..0774ecdcaf64
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-31.dtsi
@@ -0,0 +1,40 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd2_pwr_31>;
+ pinctrl-names = "default";
+
+ hdd2_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-34.dtsi b/arch/arm/boot/dts/synology/hdd-power-34.dtsi
new file mode 100644
index 000000000000..d90becf582f1
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-34.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+ &pmx_hdd4_pwr_45>;
+ pinctrl-names = "default";
+
+ hdd2_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ hdd3_power: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+ hdd4_power: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 32 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi b/arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi
new file mode 100644
index 000000000000..2305bc8b0a06
--- /dev/null
+++ b/arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ i2c@11000 {
+ rs5c372: rs5c372@32 {
+ compatible = "ricoy,rs5c372a";
+ reg = <0x32>;
+ };
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi b/arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi
new file mode 100644
index 000000000000..4b5054bb4a87
--- /dev/null
+++ b/arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp@f1000000 {
+ i2c@11000 {
+ s35390a: s35390a@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/pcie-2.dtsi b/arch/arm/boot/dts/synology/pcie-2.dtsi
new file mode 100644
index 000000000000..e34ebb5515c2
--- /dev/null
+++ b/arch/arm/boot/dts/synology/pcie-2.dtsi
@@ -0,0 +1,19 @@
+/*
+ * Nodes which are common to all Synology devices
+ *
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ mbus {
+ pcie-controller {
+ pcie@2,0 {
+ status = "okay";
+ };
+ };
+ };
+};
\ No newline at end of file
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 4/4] ARM: Kirkwood: Add support for many Synology NAS devices
@ 2014-02-15 11:01 ` Andrew Lunn
0 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2014-02-15 11:01 UTC (permalink / raw)
To: linux-arm-kernel
Add device tree fragments and files to support many of the kirkwood
based Synology NAS devices. This is a translation of the board setup
file maintained by Ben Peddell <klightspeed@killerwolves.net>
Synology hardware is designed like lego. There are two RTC blocks,
three fan alarm blocks, four led blocks, etc. To build a product, a
common base is taken, and then blocks added. This is reflected in the
DT description. Each block has a .dtsi file. The common part is also
described in a .dtsi file. Each board dts file then just includes the
common and needed blocks.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested by Ben Peddell <klightspeed@killerwolves.net>
cc: Ben Peddell <klightspeed@killerwolves.net>
---
v2:
Fix gpio's which should be gpo.
Rebase onto v3-14-rc1
Update RTC nodes with vendor name.
Update SPI flash node with vendor name.
Add a description of the lego
Use ricoy, i.e. the stock ticker
---
arch/arm/boot/dts/Makefile | 15 ++++
arch/arm/boot/dts/kirkwood-ds109.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-ds110jv10.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-ds111.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-ds112.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-ds209.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-ds210.dts | 35 ++++++++
arch/arm/boot/dts/kirkwood-ds212.dts | 37 ++++++++
arch/arm/boot/dts/kirkwood-ds212j.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-ds409.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-ds409slim.dts | 32 +++++++
arch/arm/boot/dts/kirkwood-ds411.dts | 35 ++++++++
arch/arm/boot/dts/kirkwood-ds411j.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-ds411slim.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-rs212.dts | 34 ++++++++
arch/arm/boot/dts/kirkwood-rs409.dts | 33 ++++++++
arch/arm/boot/dts/kirkwood-rs411.dts | 34 ++++++++
arch/arm/boot/dts/synology/alarm-led-12.dtsi | 28 +++++++
arch/arm/boot/dts/synology/common.dtsi | 112 +++++++++++++++++++++++++
arch/arm/boot/dts/synology/ethernet-1.dtsi | 15 ++++
arch/arm/boot/dts/synology/fan-alarm-18.dtsi | 22 +++++
arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi | 22 +++++
arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi | 32 +++++++
arch/arm/boot/dts/synology/fan-gpios-15.dtsi | 34 ++++++++
arch/arm/boot/dts/synology/fan-gpios-32.dtsi | 34 ++++++++
arch/arm/boot/dts/synology/fan-speed-100.dtsi | 20 +++++
arch/arm/boot/dts/synology/fan-speed-120.dtsi | 20 +++++
arch/arm/boot/dts/synology/fan-speed-150.dtsi | 20 +++++
arch/arm/boot/dts/synology/hdd-leds-20.dtsi | 90 ++++++++++++++++++++
arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi | 36 ++++++++
arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi | 52 ++++++++++++
arch/arm/boot/dts/synology/hdd-leds-36.dtsi | 103 +++++++++++++++++++++++
arch/arm/boot/dts/synology/hdd-leds-38.dtsi | 52 ++++++++++++
arch/arm/boot/dts/synology/hdd-power-29.dtsi | 56 +++++++++++++
arch/arm/boot/dts/synology/hdd-power-30-1.dtsi | 40 +++++++++
arch/arm/boot/dts/synology/hdd-power-30-2.dtsi | 56 +++++++++++++
arch/arm/boot/dts/synology/hdd-power-30-4.dtsi | 89 ++++++++++++++++++++
arch/arm/boot/dts/synology/hdd-power-31.dtsi | 40 +++++++++
arch/arm/boot/dts/synology/hdd-power-34.dtsi | 73 ++++++++++++++++
arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi | 18 ++++
arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi | 18 ++++
arch/arm/boot/dts/synology/pcie-2.dtsi | 19 +++++
42 files changed, 1658 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
create mode 100644 arch/arm/boot/dts/synology/alarm-led-12.dtsi
create mode 100644 arch/arm/boot/dts/synology/common.dtsi
create mode 100644 arch/arm/boot/dts/synology/ethernet-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-18.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-gpios-15.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-gpios-32.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-100.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-120.dtsi
create mode 100644 arch/arm/boot/dts/synology/fan-speed-150.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-20.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-36.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-leds-38.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-29.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-1.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-2.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-30-4.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-31.dtsi
create mode 100644 arch/arm/boot/dts/synology/hdd-power-34.dtsi
create mode 100644 arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi
create mode 100644 arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi
create mode 100644 arch/arm/boot/dts/synology/pcie-2.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9d6a8b485e0..6cf3a54ef7f1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -89,6 +89,18 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
+ kirkwood-ds109.dtb \
+ kirkwood-ds110jv10.dtb \
+ kirkwood-ds111.dtb \
+ kirkwood-ds209.dtb \
+ kirkwood-ds210.dtb \
+ kirkwood-ds212.dtb \
+ kirkwood-ds212j.dtb \
+ kirkwood-ds409.dtb \
+ kirkwood-ds409slim.dtb \
+ kirkwood-ds411.dtb \
+ kirkwood-ds411j.dtb \
+ kirkwood-ds411slim.dtb \
kirkwood-goflexnet.dtb \
kirkwood-guruplug-server-plus.dtb \
kirkwood-ib62x0.dtb \
@@ -111,6 +123,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-nsa310a.dtb \
kirkwood-openblocks_a6.dtb \
kirkwood-openblocks_a7.dtb \
+ kirkwood-rs212.dtb \
+ kirkwood-rs409.dtb \
+ kirkwood-rs411.dtb \
kirkwood-sheevaplug.dtb \
kirkwood-sheevaplug-esata.dtb \
kirkwood-topkick.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts
new file mode 100644
index 000000000000..bea085ad540a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds109.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/fan-speed-150.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-1.dtsi"
+
+/ {
+ model = "Synology DS109, DS110, DS110jv20";
+ compatible = "synology,ds109", "synology,ds110jv20",
+ "synology,ds110", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
new file mode 100644
index 000000000000..d6b746952947
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-150.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-1.dtsi"
+
+/ {
+ model = "Synology DS110j v10 and v30";
+ compatible = "synology,ds110jv10", "synology,ds110jv30",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts
new file mode 100644
index 000000000000..5f51e088903f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds111.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-1.dtsi"
+
+/ {
+ model = "Synology DS111";
+ compatible = "synology,ds111", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
new file mode 100644
index 000000000000..cda3203a0824
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-30.dtsi"
+
+/ {
+ model = "Synology DS111";
+ compatible = "synology,ds111", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts
new file mode 100644
index 000000000000..b2ebb423e129
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds209.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/fan-speed-150.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-31.dtsi"
+
+/ {
+ model = "Synology DS209";
+ compatible = "synology,ds209", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts
new file mode 100644
index 000000000000..8623dd63f44d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds210.dts
@@ -0,0 +1,35 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-150.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-31.dtsi"
+
+/ {
+ model = "Synology DS210 v10, v20, v30, DS211j";
+ compatible = "synology,ds210jv10", "synology,ds210jv20",
+ "synology,ds210jv30", "synology,ds211j",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts
new file mode 100644
index 000000000000..89e091ce2174
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212.dts
@@ -0,0 +1,37 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-30-2.dtsi"
+
+/ {
+ model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
+ compatible = "synology,ds212", "synology,ds212pv10",
+ "synology,ds212pv10", "synology,ds212pv20",
+ "synology,ds213airv10", "synology,ds213v10",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts
new file mode 100644
index 000000000000..ed14b7bb695e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212j.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-21-2.dtsi"
+#include "synology/hdd-power-29.dtsi"
+
+/ {
+ model = "Synology DS212j v10, v20";
+ compatible = "synology,ds212jv10", "synology,ds212jv20",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts
new file mode 100644
index 000000000000..7000de1add08
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-120.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-18.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+#include "synology/alarm-led-12.dtsi"
+
+/ {
+ model = "Synology DS409, DS410j";
+ compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts
new file mode 100644
index 000000000000..0ba525a594f7
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts
@@ -0,0 +1,32 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/fan-speed-120.dtsi"
+#include "synology/fan-gpios-32.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-20.dtsi"
+
+/ {
+ model = "Synology 409slim";
+ compatible = "synology,ds409slim", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
new file mode 100644
index 000000000000..4c1ca8e85559
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -0,0 +1,35 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+#include "synology/hdd-power-34.dtsi"
+
+/ {
+ model = "Synology DS411, DS413jv10";
+ compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts
new file mode 100644
index 000000000000..7f08a46ddabb
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411j.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-120.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-18.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+#include "synology/alarm-led-12.dtsi"
+
+/ {
+ model = "Synology DS411j";
+ compatible = "synology,ds411j", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts
new file mode 100644
index 000000000000..2e6d66f37002
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-1.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+
+/ {
+ model = "Synology DS411slim";
+ compatible = "synology,ds411slim", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
new file mode 100644
index 000000000000..edc797464983
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-3.dtsi"
+#include "synology/hdd-leds-38.dtsi"
+#include "synology/hdd-power-30-2.dtsi"
+
+/ {
+ model = "Synology RS212";
+ compatible = "synology,rs212", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts
new file mode 100644
index 000000000000..906664a99602
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs409.dts
@@ -0,0 +1,33 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-ricoh.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-120.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-18.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+
+/ {
+ model = "Synology RS409";
+ compatible = "synology,rs409", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts
new file mode 100644
index 000000000000..75c806ea0dc9
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs411.dts
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "synology/pcie-2.dtsi"
+#include "synology/common.dtsi"
+#include "synology/i2c-rtc-seiko.dtsi"
+#include "synology/ethernet-1.dtsi"
+#include "synology/fan-speed-100.dtsi"
+#include "synology/fan-gpios-15.dtsi"
+#include "synology/fan-alarm-35-3.dtsi"
+#include "synology/hdd-leds-36.dtsi"
+
+/ {
+ model = "Synology RS411 RS812";
+ compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/alarm-led-12.dtsi b/arch/arm/boot/dts/synology/alarm-led-12.dtsi
new file mode 100644
index 000000000000..e6ea8f07d1a5
--- /dev/null
+++ b/arch/arm/boot/dts/synology/alarm-led-12.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_led_12: pmx-led-12 {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_12>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:alarm";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/common.dtsi b/arch/arm/boot/dts/synology/common.dtsi
new file mode 100644
index 000000000000..fb078c4f9a62
--- /dev/null
+++ b/arch/arm/boot/dts/synology/common.dtsi
@@ -0,0 +1,112 @@
+/*
+ * Nodes which are common to all Synology devices
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie at 1,0 {
+ status = "okay";
+ };
+ };
+ };
+ ocp at f1000000 {
+ i2c at 11000 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pmx_twsi0>;
+ pinctrl-names = "default";
+ };
+ serial at 12000 {
+ status = "okay";
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
+ };
+ serial at 12100 {
+ status = "okay";
+ pinctrl-0 = <&pmx_uart1>;
+ pinctrl-names = "default";
+ };
+ poweroff at 12100 {
+ compatible = "synology,power-off";
+ reg = <0x12000 0x100>;
+ clocks = <&gate_clk 7>;
+ };
+ spi at 10600 {
+ status = "okay";
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ mode = <0>;
+
+ partition at 00000000 {
+ reg = <0x00000000 0x00080000>;
+ label = "RedBoot";
+ };
+
+ partition at 00080000 {
+ reg = <0x00080000 0x00200000>;
+ label = "zImage";
+ };
+
+ partition at 00280000 {
+ reg = <0x00280000 0x00140000>;
+ label = "rd.gz";
+ };
+ partition at 003c0000 {
+ reg = <0x003c0000 0x00010000>;
+ label = "vendor";
+ };
+ partition at 003d0000 {
+ reg = <0x003d0000 0x00020000>;
+ label = "RedBoot config";
+ };
+ partition at 003f0000 {
+ reg = <0x003f0000 0x00010000>;
+ label = "FIS directory";
+ };
+ };
+ };
+ sata at 80000 {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+ };
+ };
+ gpio_fan {
+ compatible = "gpio-fan";
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy {
+ device_type = "ethernet-phy";
+ reg = <8>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port at 0 {
+ phy-handle = <ðphy0>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/ethernet-1.dtsi b/arch/arm/boot/dts/synology/ethernet-1.dtsi
new file mode 100644
index 000000000000..bf00eff53bbc
--- /dev/null
+++ b/arch/arm/boot/dts/synology/ethernet-1.dtsi
@@ -0,0 +1,15 @@
+&mdio {
+ status = "okay";
+
+ ethphy1: ethernet-phy {
+ device_type = "ethernet-phy";
+ reg = <9>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet1-port at 0 {
+ phy-handle = <ðphy1>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-alarm-18.dtsi b/arch/arm/boot/dts/synology/fan-alarm-18.dtsi
new file mode 100644
index 000000000000..d323eb0d2109
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-alarm-18.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_fan_18: pmx-fan-18 {
+ marvell,pins = "mpp18";
+ marvell,function = "gpo";
+ };
+ };
+ };
+ gpio_fan {
+ alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi b/arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi
new file mode 100644
index 000000000000..12e52fdae870
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-alarm-35-1.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_fan_35: pmx-fan-35 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio_fan {
+ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi b/arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi
new file mode 100644
index 000000000000..e2a44f402bf0
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-alarm-35-3.dtsi
@@ -0,0 +1,32 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_fan_35: pmx-fan-35 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ pmx_fan_44: pmx-fan-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_fan_45: pmx-fan-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio_fan {
+ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+ &gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-gpios-15.dtsi b/arch/arm/boot/dts/synology/fan-gpios-15.dtsi
new file mode 100644
index 000000000000..e27cba942eed
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-gpios-15.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_fan_15: pmx-fan-15 {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+ pmx_fan_16: pmx-fan-16 {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+ pmx_fan_17: pmx-fan-17 {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio_fan {
+ pinctrl-0 = <&pmx_fan_15 &pmx_fan_16 &pmx_fan_17>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+ &gpio0 16 GPIO_ACTIVE_HIGH
+ &gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-gpios-32.dtsi b/arch/arm/boot/dts/synology/fan-gpios-32.dtsi
new file mode 100644
index 000000000000..d4fd393e71a8
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-gpios-32.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_fan_32: pmx-fan-32 {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+ pmx_fan_33: pmx-fan-33 {
+ marvell,pins = "mpp33";
+ marvell,function = "gpo";
+ };
+ pmx_fan_34: pmx-fan-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio_fan {
+ pinctrl-0 = <&pmx_fan_32 &pmx_fan_33 &pmx_fan_34>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+ &gpio1 1 GPIO_ACTIVE_HIGH
+ &gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/synology/fan-speed-100.dtsi b/arch/arm/boot/dts/synology/fan-speed-100.dtsi
new file mode 100644
index 000000000000..5188ba59a9b2
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-speed-100.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ gpio_fan {
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 3100 2
+ 3800 3
+ 4600 4
+ 4800 5
+ 4900 6
+ 5000 7 >;
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/fan-speed-120.dtsi b/arch/arm/boot/dts/synology/fan-speed-120.dtsi
new file mode 100644
index 000000000000..90157070492c
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-speed-120.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ gpio_fan {
+ gpio-fan,speed-map = < 0 0
+ 2500 1
+ 2700 2
+ 3000 4
+ 3600 3
+ 3800 5
+ 3900 6
+ 4300 7 >;
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/fan-speed-150.dtsi b/arch/arm/boot/dts/synology/fan-speed-150.dtsi
new file mode 100644
index 000000000000..6abc36915886
--- /dev/null
+++ b/arch/arm/boot/dts/synology/fan-speed-150.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ gpio_fan {
+ gpio-fan,speed-map = < 0 0
+ 2200 1
+ 2500 2
+ 3000 4
+ 3300 3
+ 3700 5
+ 3800 6
+ 4200 7 >;
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-20.dtsi b/arch/arm/boot/dts/synology/hdd-leds-20.dtsi
new file mode 100644
index 000000000000..e6663ea7014c
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-20.dtsi
@@ -0,0 +1,90 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_led_20: pmx-led-20 {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+ pmx_led_21: pmx-led-21 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+ pmx_led_22: pmx-led-22 {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+ pmx_led_23: pmx-led-23 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+ pmx_led_24: pmx-led-24 {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+ pmx_led_25: pmx-led-25 {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+ pmx_led_26: pmx-led-26 {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+ pmx_led_27: pmx-led-27 {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+ pmx_led_28: pmx-led-28 {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_20 &pmx_led_21 &pmx_led_22
+ &pmx_led_23 &pmx_led_24 &pmx_led_25
+ &pmx_led_26 &pmx_led_27>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+ hdd3-green {
+ label = "synology:green:hdd3";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+ hdd3-amber {
+ label = "synology:amber:hdd3";
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ };
+ hdd4-green {
+ label = "synology:green:hdd4";
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ };
+ hdd4-amber {
+ label = "synology:amber:hdd4";
+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi b/arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi
new file mode 100644
index 000000000000..034323f9ffb0
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-21-1.dtsi
@@ -0,0 +1,36 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_led_21: pmx-led-21 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+ pmx_led_23: pmx-led-23 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_21 &pmx_led_23>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi b/arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi
new file mode 100644
index 000000000000..446a28f2200b
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-21-2.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_led_20: pmx-led-20 {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+ pmx_led_21: pmx-led-21 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+ pmx_led_22: pmx-led-22 {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+ pmx_led_23: pmx-led-23 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_21 &pmx_led_23 &pmx_led_20 &pmx_led_22>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-36.dtsi b/arch/arm/boot/dts/synology/hdd-leds-36.dtsi
new file mode 100644
index 000000000000..9541c0c943e6
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-36.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_led_36: pmx-led-36 {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_led_37: pmx-led-37 {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ pmx_led_38: pmx-led-38 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_39: pmx-led-39 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_led_40: pmx-led-40 {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+ pmx_led_41: pmx-led-41 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_led_42: pmx-led-42 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_led_43: pmx-led-43 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_led_44: pmx-led-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_led_45: pmx-led-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_36 &pmx_led_37 &pmx_led_38
+ &pmx_led_39 &pmx_led_40 &pmx_led_41
+ &pmx_led_42 &pmx_led_43 &pmx_led_44
+ &pmx_led_45>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+ hdd3-green {
+ label = "synology:green:hdd3";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+ hdd3-amber {
+ label = "synology:amber:hdd3";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+ hdd4-green {
+ label = "synology:green:hdd4";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+ hdd4-amber {
+ label = "synology:amber:hdd4";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+ hdd5-green {
+ label = "synology:green:hdd5";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ hdd5-amber {
+ label = "synology:amber:hdd5";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-leds-38.dtsi b/arch/arm/boot/dts/synology/hdd-leds-38.dtsi
new file mode 100644
index 000000000000..d2fe351a0808
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-leds-38.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_led_38: pmx-led-38 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_39: pmx-led-39 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_led_36: pmx-led-36 {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_led_37: pmx-led-37 {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_38 &pmx_led_39 &pmx_led_36 &pmx_led_37>;
+ pinctrl-names = "default";
+ hdd1-green {
+ label = "synology:green:hdd1";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+ hdd1-amber {
+ label = "synology:amber:hdd1";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-green {
+ label = "synology:green:hdd2";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ };
+ hdd2-amber {
+ label = "synology:amber:hdd2";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-29.dtsi b/arch/arm/boot/dts/synology/hdd-power-29.dtsi
new file mode 100644
index 000000000000..8b08c86ab942
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-29.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+ pinctrl-names = "default";
+
+ hdd1_power: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ hdd2_power: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-30-1.dtsi b/arch/arm/boot/dts/synology/hdd-power-30-1.dtsi
new file mode 100644
index 000000000000..b0998d4e231f
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-30-1.dtsi
@@ -0,0 +1,40 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30>;
+ pinctrl-names = "default";
+
+ hdd1_power: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-30-2.dtsi b/arch/arm/boot/dts/synology/hdd-power-30-2.dtsi
new file mode 100644
index 000000000000..766e6352d5af
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-30-2.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+ pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+ pinctrl-names = "default";
+
+ hdd1_power: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+ hdd2_power: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-30-4.dtsi b/arch/arm/boot/dts/synology/hdd-power-30-4.dtsi
new file mode 100644
index 000000000000..5bbced207965
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-30-4.dtsi
@@ -0,0 +1,89 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+ pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+ &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+ pinctrl-names = "default";
+
+ hdd1_power: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+ hdd2_power: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ hdd3_power: regulator at 3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+ hdd4_power: regulator at 4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 32 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-31.dtsi b/arch/arm/boot/dts/synology/hdd-power-31.dtsi
new file mode 100644
index 000000000000..0774ecdcaf64
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-31.dtsi
@@ -0,0 +1,40 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd2_pwr_31>;
+ pinctrl-names = "default";
+
+ hdd2_power: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/hdd-power-34.dtsi b/arch/arm/boot/dts/synology/hdd-power-34.dtsi
new file mode 100644
index 000000000000..d90becf582f1
--- /dev/null
+++ b/arch/arm/boot/dts/synology/hdd-power-34.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+ &pmx_hdd4_pwr_45>;
+ pinctrl-names = "default";
+
+ hdd2_power: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ hdd3_power: regulator at 3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+ hdd4_power: regulator at 4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ startup-delay-us = <5000000>;
+ gpio = <&gpio1 32 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi b/arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi
new file mode 100644
index 000000000000..2305bc8b0a06
--- /dev/null
+++ b/arch/arm/boot/dts/synology/i2c-rtc-ricoh.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ i2c at 11000 {
+ rs5c372: rs5c372 at 32 {
+ compatible = "ricoy,rs5c372a";
+ reg = <0x32>;
+ };
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi b/arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi
new file mode 100644
index 000000000000..4b5054bb4a87
--- /dev/null
+++ b/arch/arm/boot/dts/synology/i2c-rtc-seiko.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ ocp at f1000000 {
+ i2c at 11000 {
+ s35390a: s35390a at 30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/synology/pcie-2.dtsi b/arch/arm/boot/dts/synology/pcie-2.dtsi
new file mode 100644
index 000000000000..e34ebb5515c2
--- /dev/null
+++ b/arch/arm/boot/dts/synology/pcie-2.dtsi
@@ -0,0 +1,19 @@
+/*
+ * Nodes which are common to all Synology devices
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+ mbus {
+ pcie-controller {
+ pcie at 2,0 {
+ status = "okay";
+ };
+ };
+ };
+};
\ No newline at end of file
--
1.8.5.3
^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2014-02-15 11:01 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-15 11:01 [PATCH v2 0/4] DT support for kirkwood based Synology NAS boxes Andrew Lunn
2014-02-15 11:01 ` Andrew Lunn
[not found] ` <1392462094-25097-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2014-02-15 11:01 ` [PATCH v2 1/4] Power: Reset: Generalize qnap-poweroff to with on Synology devices Andrew Lunn
2014-02-15 11:01 ` Andrew Lunn
2014-02-15 11:01 ` [PATCH v2 2/4] DT: Vender prefixes: Add ricoh, ssi and synology Andrew Lunn
2014-02-15 11:01 ` Andrew Lunn
2014-02-15 11:01 ` [PATCH v2 3/4] DT: i2c: Trivial: Add sii,s35390a, fix ricoh vendor prefix Andrew Lunn
2014-02-15 11:01 ` [PATCH v2 3/4] DT: i2c: Trivial: Add sii, s35390a, " Andrew Lunn
2014-02-15 11:01 ` [PATCH v2 4/4] ARM: Kirkwood: Add support for many Synology NAS devices Andrew Lunn
2014-02-15 11:01 ` Andrew Lunn
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.