[Qemu-devel] [PULL 1/5] acpi-build: append description for non-hotplug

["Michael S. Tsirkin" <mst@redhat.com>]

As reported in
http://article.gmane.org/gmane.comp.emulators.qemu/253987
Mac OSX actually requires describing all occupied slots
in ACPI - even if hotplug isn't enabled.

I didn't expect this so I dropped description of all
non hotpluggable slots from ACPI.
As a result: before
commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable
hotplug for pci bridges), PCI cards show up in the "device tree" of OS X
(System Information). E.g., on MountainLion users have:

Hardware -> PCI Cards:

  Card          Type                 Driver Installed  Slot
 *ethernet      Ethernet Controller  Yes               PCI Slot 2
  pci8086,2934  USB UHC              Yes               PCI Slot 29

  ethernet:
    Type:                 Ethernet Controller
    Driver Installed:     Yes
    MSI:                  No
    Bus:                  PCI
    Slot                  PCI Slot 2
    Vendor ID:            0x8086
    Device ID:            0x100e
    Subsystem Vendor ID:  0x1af4
    Subsystem ID:         0x1100
    Revision ID:          0x0003

Hardware -> Ethernet Cards

  ethernet:
    Type:                 Ethernet Controller
    Bus:                  PCI
    Slot                  PCI Slot 2
    Vendor ID:            0x8086
    Device ID:            0x100e
    Subsystem Vendor ID:  0x1af4
    Subsystem ID:         0x1100
    Revision ID:          0x0003
    BSD name:             en0
    Kext name:            AppleIntel8254XEthernet.kext
    Location:             /System/Library/Extensions/...
    Version:              3.1.1b1

After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get:

Hardware -> PCI Cards:

  This computer doesn't contain any PCI cards. If you installed PCI
  cards, make sure they're properly installed.

Hardware -> Ethernet Cards

  ethernet:
    Type:                 Ethernet Controller
    Bus:                  PCI
    Vendor ID:            0x8086
    Device ID:            0x100e
    Subsystem Vendor ID:  0x1af4
    Subsystem ID:         0x1100
    Revision ID:          0x0003
    BSD name:             en0
    Kext name:            AppleIntel8254XEthernet.kext
    Location:             /System/Library/Extensions/...
    Version:              3.1.1b1

Ethernet still works, but it's not showing up on the PCI bus, and it
no longer thinks it's plugged in to slot #2, as it used to before the
change.

To fix, append description for all occupied non hotpluggable PCI slots.

One need to be careful when doing this: VGA and ISA device were already
described, so we need to drop description from DSDT.

Reported-by: Gabriel L. Somlo <gsomlo@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/i386/acpi-build.c      | 140 ++++++++++++++++++++++++++++++++++++++--------
 tests/acpi-test.c         |   2 +-
 hw/i386/acpi-dsdt.dsl     |  41 +++-----------
 hw/i386/q35-acpi-dsdt.dsl |  29 ++--------
 hw/i386/ssdt-pcihp.dsl    |  56 +++++++++++++++++++
 5 files changed, 184 insertions(+), 84 deletions(-)

diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index b1a7ebb..5b0bb5a 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -643,6 +643,24 @@ static inline char acpi_get_hex(uint32_t val)
 #define ACPI_PCIHP_SIZEOF (*ssdt_pcihp_end - *ssdt_pcihp_start)
 #define ACPI_PCIHP_AML (ssdp_pcihp_aml + *ssdt_pcihp_start)
 
+#define ACPI_PCINOHP_OFFSET_HEX (*ssdt_pcinohp_name - *ssdt_pcinohp_start + 1)
+#define ACPI_PCINOHP_OFFSET_ID (*ssdt_pcinohp_id - *ssdt_pcinohp_start)
+#define ACPI_PCINOHP_OFFSET_ADR (*ssdt_pcinohp_adr - *ssdt_pcinohp_start)
+#define ACPI_PCINOHP_SIZEOF (*ssdt_pcinohp_end - *ssdt_pcinohp_start)
+#define ACPI_PCINOHP_AML (ssdp_pcihp_aml + *ssdt_pcinohp_start)
+
+#define ACPI_PCIVGA_OFFSET_HEX (*ssdt_pcivga_name - *ssdt_pcivga_start + 1)
+#define ACPI_PCIVGA_OFFSET_ID (*ssdt_pcivga_id - *ssdt_pcivga_start)
+#define ACPI_PCIVGA_OFFSET_ADR (*ssdt_pcivga_adr - *ssdt_pcivga_start)
+#define ACPI_PCIVGA_SIZEOF (*ssdt_pcivga_end - *ssdt_pcivga_start)
+#define ACPI_PCIVGA_AML (ssdp_pcihp_aml + *ssdt_pcivga_start)
+
+#define ACPI_PCIQXL_OFFSET_HEX (*ssdt_pciqxl_name - *ssdt_pciqxl_start + 1)
+#define ACPI_PCIQXL_OFFSET_ID (*ssdt_pciqxl_id - *ssdt_pciqxl_start)
+#define ACPI_PCIQXL_OFFSET_ADR (*ssdt_pciqxl_adr - *ssdt_pciqxl_start)
+#define ACPI_PCIQXL_SIZEOF (*ssdt_pciqxl_end - *ssdt_pciqxl_start)
+#define ACPI_PCIQXL_AML (ssdp_pcihp_aml + *ssdt_pciqxl_start)
+
 #define ACPI_SSDT_SIGNATURE 0x54445353 /* SSDT */
 #define ACPI_SSDT_HEADER_LENGTH 36
 
@@ -677,6 +695,36 @@ static void patch_pcihp(int slot, uint8_t *ssdt_ptr)
     ssdt_ptr[ACPI_PCIHP_OFFSET_ADR + 2] = slot;
 }
 
+static void patch_pcinohp(int slot, uint8_t *ssdt_ptr)
+{
+    unsigned devfn = PCI_DEVFN(slot, 0);
+
+    ssdt_ptr[ACPI_PCINOHP_OFFSET_HEX] = acpi_get_hex(devfn >> 4);
+    ssdt_ptr[ACPI_PCINOHP_OFFSET_HEX + 1] = acpi_get_hex(devfn);
+    ssdt_ptr[ACPI_PCINOHP_OFFSET_ID] = slot;
+    ssdt_ptr[ACPI_PCINOHP_OFFSET_ADR + 2] = slot;
+}
+
+static void patch_pcivga(int slot, uint8_t *ssdt_ptr)
+{
+    unsigned devfn = PCI_DEVFN(slot, 0);
+
+    ssdt_ptr[ACPI_PCIVGA_OFFSET_HEX] = acpi_get_hex(devfn >> 4);
+    ssdt_ptr[ACPI_PCIVGA_OFFSET_HEX + 1] = acpi_get_hex(devfn);
+    ssdt_ptr[ACPI_PCIVGA_OFFSET_ID] = slot;
+    ssdt_ptr[ACPI_PCIVGA_OFFSET_ADR + 2] = slot;
+}
+
+static void patch_pciqxl(int slot, uint8_t *ssdt_ptr)
+{
+    unsigned devfn = PCI_DEVFN(slot, 0);
+
+    ssdt_ptr[ACPI_PCIQXL_OFFSET_HEX] = acpi_get_hex(devfn >> 4);
+    ssdt_ptr[ACPI_PCIQXL_OFFSET_HEX + 1] = acpi_get_hex(devfn);
+    ssdt_ptr[ACPI_PCIQXL_OFFSET_ID] = slot;
+    ssdt_ptr[ACPI_PCIQXL_OFFSET_ADR + 2] = slot;
+}
+
 /* Assign BSEL property to all buses.  In the future, this can be changed
  * to only assign to buses that support hotplug.
  */
@@ -737,6 +785,9 @@ static void build_pci_bus_end(PCIBus *bus, void *bus_state)
     AcpiBuildPciBusHotplugState *parent = child->parent;
     GArray *bus_table = build_alloc_array();
     DECLARE_BITMAP(slot_hotplug_enable, PCI_SLOT_MAX);
+    DECLARE_BITMAP(slot_device_present, PCI_SLOT_MAX);
+    DECLARE_BITMAP(slot_device_vga, PCI_SLOT_MAX);
+    DECLARE_BITMAP(slot_device_qxl, PCI_SLOT_MAX);
     uint8_t op;
     int i;
     QObject *bsel;
@@ -764,40 +815,74 @@ static void build_pci_bus_end(PCIBus *bus, void *bus_state)
         build_append_byte(bus_table, 0x08); /* NameOp */
         build_append_nameseg(bus_table, "BSEL");
         build_append_int(bus_table, qint_get_int(qobject_to_qint(bsel)));
-
         memset(slot_hotplug_enable, 0xff, sizeof slot_hotplug_enable);
+    } else {
+        /* No bsel - no slots are hot-pluggable */
+        memset(slot_hotplug_enable, 0x00, sizeof slot_hotplug_enable);
+    }
 
-        for (i = 0; i < ARRAY_SIZE(bus->devices); ++i) {
-            DeviceClass *dc;
-            PCIDeviceClass *pc;
-            PCIDevice *pdev = bus->devices[i];
+    memset(slot_device_present, 0x00, sizeof slot_device_present);
+    memset(slot_device_vga, 0x00, sizeof slot_device_vga);
+    memset(slot_device_qxl, 0x00, sizeof slot_device_qxl);
 
-            if (!pdev) {
-                continue;
-            }
+    for (i = 0; i < ARRAY_SIZE(bus->devices); ++i) {
+        DeviceClass *dc;
+        PCIDeviceClass *pc;
+        PCIDevice *pdev = bus->devices[i];
+        int slot = PCI_SLOT(i);
 
-            pc = PCI_DEVICE_GET_CLASS(pdev);
-            dc = DEVICE_GET_CLASS(pdev);
+        if (!pdev) {
+            continue;
+        }
 
-            if (!dc->hotpluggable || pc->is_bridge) {
-                int slot = PCI_SLOT(i);
+        set_bit(slot, slot_device_present);
+        pc = PCI_DEVICE_GET_CLASS(pdev);
+        dc = DEVICE_GET_CLASS(pdev);
 
-                clear_bit(slot, slot_hotplug_enable);
+        if (pc->class_id == PCI_CLASS_DISPLAY_VGA) {
+            set_bit(slot, slot_device_vga);
+
+            if (object_dynamic_cast(OBJECT(pdev), "qxl-vga")) {
+                set_bit(slot, slot_device_qxl);
             }
         }
 
-        /* Append Device object for each slot which supports eject */
-        for (i = 0; i < PCI_SLOT_MAX; i++) {
-            bool can_eject = test_bit(i, slot_hotplug_enable);
-            if (can_eject) {
-                void *pcihp = acpi_data_push(bus_table,
-                                             ACPI_PCIHP_SIZEOF);
-                memcpy(pcihp, ACPI_PCIHP_AML, ACPI_PCIHP_SIZEOF);
-                patch_pcihp(i, pcihp);
-                bus_hotplug_support = true;
-            }
+        if (!dc->hotpluggable || pc->is_bridge) {
+            clear_bit(slot, slot_hotplug_enable);
+        }
+    }
+
+    /* Append Device object for each slot which supports eject */
+    for (i = 0; i < PCI_SLOT_MAX; i++) {
+        bool can_eject = test_bit(i, slot_hotplug_enable);
+        bool present = test_bit(i, slot_device_present);
+        bool vga = test_bit(i, slot_device_vga);
+        bool qxl = test_bit(i, slot_device_qxl);
+        if (can_eject) {
+            void *pcihp = acpi_data_push(bus_table,
+                                         ACPI_PCIHP_SIZEOF);
+            memcpy(pcihp, ACPI_PCIHP_AML, ACPI_PCIHP_SIZEOF);
+            patch_pcihp(i, pcihp);
+            bus_hotplug_support = true;
+        } else if (qxl) {
+            void *pcihp = acpi_data_push(bus_table,
+                                         ACPI_PCIQXL_SIZEOF);
+            memcpy(pcihp, ACPI_PCIQXL_AML, ACPI_PCIQXL_SIZEOF);
+            patch_pciqxl(i, pcihp);
+        } else if (vga) {
+            void *pcihp = acpi_data_push(bus_table,
+                                         ACPI_PCIVGA_SIZEOF);
+            memcpy(pcihp, ACPI_PCIVGA_AML, ACPI_PCIVGA_SIZEOF);
+            patch_pcivga(i, pcihp);
+        } else if (present) {
+            void *pcihp = acpi_data_push(bus_table,
+                                         ACPI_PCINOHP_SIZEOF);
+            memcpy(pcihp, ACPI_PCINOHP_AML, ACPI_PCINOHP_SIZEOF);
+            patch_pcinohp(i, pcihp);
         }
+    }
 
+    if (bsel) {
         method = build_alloc_method("DVNT", 2);
 
         for (i = 0; i < PCI_SLOT_MAX; i++) {
@@ -976,7 +1061,14 @@ build_ssdt(GArray *table_data, GArray *linker,
 
         {
             AcpiBuildPciBusHotplugState hotplug_state;
-            PCIBus *bus = find_i440fx(); /* TODO: Q35 support */
+            Object *pci_host;
+            PCIBus *bus = NULL;
+            bool ambiguous;
+
+            pci_host = object_resolve_path_type("", TYPE_PCI_HOST_BRIDGE, &ambiguous);
+            if (!ambiguous && pci_host) {
+                bus = PCI_HOST_BRIDGE(pci_host)->bus;
+            }
 
             build_pci_bus_state_init(&hotplug_state, NULL);
 
diff --git a/tests/acpi-test.c b/tests/acpi-test.c
index 31f5359..613dda8 100644
--- a/tests/acpi-test.c
+++ b/tests/acpi-test.c
@@ -153,7 +153,7 @@ static void free_test_data(test_data *data)
             g_free(temp->aml);
         }
         if (temp->aml_file) {
-            if (g_strstr_len(temp->aml_file, -1, "aml-")) {
+            if (!temp->asl_file_retain && g_strstr_len(temp->aml_file, -1, "aml-")) {
                 unlink(temp->aml_file);
             }
             g_free(temp->aml_file);
diff --git a/hw/i386/acpi-dsdt.dsl b/hw/i386/acpi-dsdt.dsl
index b23d5e0..6b5ab32 100644
--- a/hw/i386/acpi-dsdt.dsl
+++ b/hw/i386/acpi-dsdt.dsl
@@ -80,6 +80,8 @@ DefinitionBlock (
             Name(_HID, EisaId("PNP0A03"))
             Name(_ADR, 0x00)
             Name(_UID, 1)
+#define PX13 S0B_
+            External(PX13, DeviceObj)
         }
     }
 
@@ -88,42 +90,11 @@ DefinitionBlock (
 
 
 /****************************************************************
- * VGA
- ****************************************************************/
-
-    Scope(\_SB.PCI0) {
-        Device(VGA) {
-            Name(_ADR, 0x00020000)
-            OperationRegion(PCIC, PCI_Config, Zero, 0x4)
-            Field(PCIC, DWordAcc, NoLock, Preserve) {
-                VEND, 32
-            }
-            Method(_S1D, 0, NotSerialized) {
-                Return (0x00)
-            }
-            Method(_S2D, 0, NotSerialized) {
-                Return (0x00)
-            }
-            Method(_S3D, 0, NotSerialized) {
-                If (LEqual(VEND, 0x1001b36)) {
-                    Return (0x03)           // QXL
-                } Else {
-                    Return (0x00)
-                }
-            }
-        }
-    }
-
-
-/****************************************************************
  * PIIX4 PM
  ****************************************************************/
 
-    Scope(\_SB.PCI0) {
-        Device(PX13) {
-            Name(_ADR, 0x00010003)
+    Scope(\_SB.PCI0.PX13) {
             OperationRegion(P13C, PCI_Config, 0x00, 0xff)
-        }
     }
 
 
@@ -132,9 +103,11 @@ DefinitionBlock (
  ****************************************************************/
 
     Scope(\_SB.PCI0) {
-        Device(ISA) {
-            Name(_ADR, 0x00010000)
 
+#define ISA S08_
+        External(ISA, DeviceObj)
+
+        Scope(ISA) {
             /* PIIX PCI to ISA irq remapping */
             OperationRegion(P40C, PCI_Config, 0x60, 0x04)
 
diff --git a/hw/i386/q35-acpi-dsdt.dsl b/hw/i386/q35-acpi-dsdt.dsl
index d618e9e..8e522a5 100644
--- a/hw/i386/q35-acpi-dsdt.dsl
+++ b/hw/i386/q35-acpi-dsdt.dsl
@@ -72,6 +72,9 @@ DefinitionBlock (
             Name(_ADR, 0x00)
             Name(_UID, 1)
 
+#define ISA SF8_
+            External(ISA, DeviceObj)
+
             // _OSC: based on sample of ACPI3.0b spec
             Name(SUPP, 0) // PCI _OSC Support Field value
             Name(CTRL, 0) // PCI _OSC Control Field value
@@ -134,34 +137,11 @@ DefinitionBlock (
 
 
 /****************************************************************
- * VGA
- ****************************************************************/
-
-    Scope(\_SB.PCI0) {
-        Device(VGA) {
-            Name(_ADR, 0x00010000)
-            Method(_S1D, 0, NotSerialized) {
-                Return (0x00)
-            }
-            Method(_S2D, 0, NotSerialized) {
-                Return (0x00)
-            }
-            Method(_S3D, 0, NotSerialized) {
-                Return (0x00)
-            }
-        }
-    }
-
-
-/****************************************************************
  * LPC ISA bridge
  ****************************************************************/
 
-    Scope(\_SB.PCI0) {
+    Scope(\_SB.PCI0.ISA) {
         /* PCI D31:f0 LPC ISA bridge */
-        Device(ISA) {
-            /* PCI D31:f0 */
-            Name(_ADR, 0x001f0000)
 
             /* ICH9 PCI to ISA irq remapping */
             OperationRegion(PIRQ, PCI_Config, 0x60, 0x0C)
@@ -184,7 +164,6 @@ DefinitionBlock (
                 LPEN,   1,
                 FDEN,   1
             }
-        }
     }
 
 #define DSDT_APPLESMC_STA q35_dsdt_applesmc_sta
diff --git a/hw/i386/ssdt-pcihp.dsl b/hw/i386/ssdt-pcihp.dsl
index cc245c3..69a0228 100644
--- a/hw/i386/ssdt-pcihp.dsl
+++ b/hw/i386/ssdt-pcihp.dsl
@@ -46,5 +46,61 @@ DefinitionBlock ("ssdt-pcihp.aml", "SSDT", 0x01, "BXPC", "BXSSDTPCIHP", 0x1)
             }
         }
 
+        ACPI_EXTRACT_DEVICE_START ssdt_pcinohp_start
+        ACPI_EXTRACT_DEVICE_END ssdt_pcinohp_end
+        ACPI_EXTRACT_DEVICE_STRING ssdt_pcinohp_name
+
+        // Extract the offsets of the device name, address dword and the slot
+        // name byte - we fill them in for each device.
+        Device(SBB) {
+            ACPI_EXTRACT_NAME_BYTE_CONST ssdt_pcinohp_id
+            Name(_SUN, 0xAA)
+            ACPI_EXTRACT_NAME_DWORD_CONST ssdt_pcinohp_adr
+            Name(_ADR, 0xAA0000)
+        }
+
+        ACPI_EXTRACT_DEVICE_START ssdt_pcivga_start
+        ACPI_EXTRACT_DEVICE_END ssdt_pcivga_end
+        ACPI_EXTRACT_DEVICE_STRING ssdt_pcivga_name
+
+        // Extract the offsets of the device name, address dword and the slot
+        // name byte - we fill them in for each device.
+        Device(SCC) {
+            ACPI_EXTRACT_NAME_BYTE_CONST ssdt_pcivga_id
+            Name(_SUN, 0xAA)
+            ACPI_EXTRACT_NAME_DWORD_CONST ssdt_pcivga_adr
+            Name(_ADR, 0xAA0000)
+            Method(_S1D, 0, NotSerialized) {
+                Return (0x00)
+            }
+            Method(_S2D, 0, NotSerialized) {
+                Return (0x00)
+            }
+            Method(_S3D, 0, NotSerialized) {
+                Return (0x00)
+            }
+        }
+
+        ACPI_EXTRACT_DEVICE_START ssdt_pciqxl_start
+        ACPI_EXTRACT_DEVICE_END ssdt_pciqxl_end
+        ACPI_EXTRACT_DEVICE_STRING ssdt_pciqxl_name
+
+        // Extract the offsets of the device name, address dword and the slot
+        // name byte - we fill them in for each device.
+        Device(SDD) {
+            ACPI_EXTRACT_NAME_BYTE_CONST ssdt_pciqxl_id
+            Name(_SUN, 0xAA)
+            ACPI_EXTRACT_NAME_DWORD_CONST ssdt_pciqxl_adr
+            Name(_ADR, 0xAA0000)
+            Method(_S1D, 0, NotSerialized) {
+                Return (0x00)
+            }
+            Method(_S2D, 0, NotSerialized) {
+                Return (0x00)
+            }
+            Method(_S3D, 0, NotSerialized) {
+                Return (0x03)           // QXL
+            }
+        }
     }
 }
-- 
MST