All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>,
	qemu-devel@nongnu.org, Anthony Liguori <aliguori@amazon.com>
Subject: Re: [Qemu-devel] [PULL 1/5] acpi-build: append description for non-hotplug
Date: Wed, 19 Feb 2014 21:09:16 +0200	[thread overview]
Message-ID: <20140219190916.GB24622@redhat.com> (raw)
In-Reply-To: <20140219152450.GU29329@ERROL.INI.CMU.EDU>

On Wed, Feb 19, 2014 at 10:24:50AM -0500, Gabriel L. Somlo wrote:
> On Wed, Feb 19, 2014 at 03:50:22PM +0200, Michael S. Tsirkin wrote:
> > On Mon, Feb 17, 2014 at 09:51:39AM -0500, Gabriel L. Somlo wrote:
> > > 
> > > With this latest version of your patch, I crash during OS X boot with
> > > "unable to find driver for this platform:\"ACPI\".\n"@/SourceCache/xnu/xnu-2050.48.12/iokit/Kernel/IOPlatformExpert.cpp:1514"
> > > 
> > > Your original patch (slightly doctored since it no longer applies cleanly
> > > to the current qemu git master) is included below, and still works for me.
> > 
> > Any chance below helps on top?
> 
> Nope, sorry, I'm getting the same error :(
> 
> > Another alternative is that DSDT referencing
> > SSDT does not work for apple.
> > I hope it's not that, that would be annoying...
> 
> I'm probably misunderstanding this in a major way, but when I try the
> following, just for grins:
> 
> diff --git a/hw/i386/acpi-dsdt-hpet.dsl b/hw/i386/acpi-dsdt-hpet.dsl
> index 44961b8..d4614e0 100644
> --- a/hw/i386/acpi-dsdt-hpet.dsl
> +++ b/hw/i386/acpi-dsdt-hpet.dsl
> @@ -36,6 +36,9 @@ Scope(\_SB) {
>              If (LOr(LEqual(Local1, 0), LGreater(Local1, 100000000)))
> {
>                  Return (0x0)
>              }
> +            If (LEqual(\_SB.FOBR, 0x12)) {
> +                Return (0x0)
> +            }
>              Return (0x0F)
>          }
>          Name(_CRS, ResourceTemplate() {
> diff --git a/hw/i386/ssdt-misc.dsl b/hw/i386/ssdt-misc.dsl
> index a4484b8..67d853a 100644
> --- a/hw/i386/ssdt-misc.dsl
> +++ b/hw/i386/ssdt-misc.dsl
> @@ -22,6 +22,10 @@ DefinitionBlock ("ssdt-misc.aml", "SSDT", 0x01,
> "BXPC", "BXSS
>   * PCI memory ranges
>   ****************************************************************/
>  
> +    Scope(\_SB) {
> +       Name(FOBR, 0x12)
> +    }
> +
>      Scope(\) {
>         ACPI_EXTRACT_NAME_DWORD_CONST acpi_pci32_start
>         Name(P0S, 0x12345678)
> ---
> 
> I get iasl compile errors, never even make it to the point where
> OS X would get a chance to be upset with me... :)
> 
> Thanks,
> --Gabriel

You will have to declare it with Extern in DSDT.

> > commit 12b48c660b8316b1e8ff633eb9f3f34bd4b78284
> > Author: Michael S. Tsirkin <mst@redhat.com>
> > Date:   Wed Feb 19 15:47:03 2014 +0200
> > 
> >     acpi-build: drop _SUN for non hotpluggable slots
> >     
> >     Not needed there, let's not add it.
> >     
> >     Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> > 
> > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> > index 5b0bb5a..226e59e 100644
> > --- a/hw/i386/acpi-build.c
> > +++ b/hw/i386/acpi-build.c
> > @@ -644,19 +644,16 @@ static inline char acpi_get_hex(uint32_t val)
> >  #define ACPI_PCIHP_AML (ssdp_pcihp_aml + *ssdt_pcihp_start)
> >  
> >  #define ACPI_PCINOHP_OFFSET_HEX (*ssdt_pcinohp_name - *ssdt_pcinohp_start + 1)
> > -#define ACPI_PCINOHP_OFFSET_ID (*ssdt_pcinohp_id - *ssdt_pcinohp_start)
> >  #define ACPI_PCINOHP_OFFSET_ADR (*ssdt_pcinohp_adr - *ssdt_pcinohp_start)
> >  #define ACPI_PCINOHP_SIZEOF (*ssdt_pcinohp_end - *ssdt_pcinohp_start)
> >  #define ACPI_PCINOHP_AML (ssdp_pcihp_aml + *ssdt_pcinohp_start)
> >  
> >  #define ACPI_PCIVGA_OFFSET_HEX (*ssdt_pcivga_name - *ssdt_pcivga_start + 1)
> > -#define ACPI_PCIVGA_OFFSET_ID (*ssdt_pcivga_id - *ssdt_pcivga_start)
> >  #define ACPI_PCIVGA_OFFSET_ADR (*ssdt_pcivga_adr - *ssdt_pcivga_start)
> >  #define ACPI_PCIVGA_SIZEOF (*ssdt_pcivga_end - *ssdt_pcivga_start)
> >  #define ACPI_PCIVGA_AML (ssdp_pcihp_aml + *ssdt_pcivga_start)
> >  
> >  #define ACPI_PCIQXL_OFFSET_HEX (*ssdt_pciqxl_name - *ssdt_pciqxl_start + 1)
> > -#define ACPI_PCIQXL_OFFSET_ID (*ssdt_pciqxl_id - *ssdt_pciqxl_start)
> >  #define ACPI_PCIQXL_OFFSET_ADR (*ssdt_pciqxl_adr - *ssdt_pciqxl_start)
> >  #define ACPI_PCIQXL_SIZEOF (*ssdt_pciqxl_end - *ssdt_pciqxl_start)
> >  #define ACPI_PCIQXL_AML (ssdp_pcihp_aml + *ssdt_pciqxl_start)
> > @@ -701,7 +698,6 @@ static void patch_pcinohp(int slot, uint8_t *ssdt_ptr)
> >  
> >      ssdt_ptr[ACPI_PCINOHP_OFFSET_HEX] = acpi_get_hex(devfn >> 4);
> >      ssdt_ptr[ACPI_PCINOHP_OFFSET_HEX + 1] = acpi_get_hex(devfn);
> > -    ssdt_ptr[ACPI_PCINOHP_OFFSET_ID] = slot;
> >      ssdt_ptr[ACPI_PCINOHP_OFFSET_ADR + 2] = slot;
> >  }
> >  
> > @@ -711,7 +707,6 @@ static void patch_pcivga(int slot, uint8_t *ssdt_ptr)
> >  
> >      ssdt_ptr[ACPI_PCIVGA_OFFSET_HEX] = acpi_get_hex(devfn >> 4);
> >      ssdt_ptr[ACPI_PCIVGA_OFFSET_HEX + 1] = acpi_get_hex(devfn);
> > -    ssdt_ptr[ACPI_PCIVGA_OFFSET_ID] = slot;
> >      ssdt_ptr[ACPI_PCIVGA_OFFSET_ADR + 2] = slot;
> >  }
> >  
> > @@ -721,7 +716,6 @@ static void patch_pciqxl(int slot, uint8_t *ssdt_ptr)
> >  
> >      ssdt_ptr[ACPI_PCIQXL_OFFSET_HEX] = acpi_get_hex(devfn >> 4);
> >      ssdt_ptr[ACPI_PCIQXL_OFFSET_HEX + 1] = acpi_get_hex(devfn);
> > -    ssdt_ptr[ACPI_PCIQXL_OFFSET_ID] = slot;
> >      ssdt_ptr[ACPI_PCIQXL_OFFSET_ADR + 2] = slot;
> >  }
> >  
> > diff --git a/hw/i386/ssdt-pcihp.dsl b/hw/i386/ssdt-pcihp.dsl
> > index 69a0228..ac91c05 100644
> > --- a/hw/i386/ssdt-pcihp.dsl
> > +++ b/hw/i386/ssdt-pcihp.dsl
> > @@ -53,8 +53,6 @@ DefinitionBlock ("ssdt-pcihp.aml", "SSDT", 0x01, "BXPC", "BXSSDTPCIHP", 0x1)
> >          // Extract the offsets of the device name, address dword and the slot
> >          // name byte - we fill them in for each device.
> >          Device(SBB) {
> > -            ACPI_EXTRACT_NAME_BYTE_CONST ssdt_pcinohp_id
> > -            Name(_SUN, 0xAA)
> >              ACPI_EXTRACT_NAME_DWORD_CONST ssdt_pcinohp_adr
> >              Name(_ADR, 0xAA0000)
> >          }
> > @@ -66,8 +64,6 @@ DefinitionBlock ("ssdt-pcihp.aml", "SSDT", 0x01, "BXPC", "BXSSDTPCIHP", 0x1)
> >          // Extract the offsets of the device name, address dword and the slot
> >          // name byte - we fill them in for each device.
> >          Device(SCC) {
> > -            ACPI_EXTRACT_NAME_BYTE_CONST ssdt_pcivga_id
> > -            Name(_SUN, 0xAA)
> >              ACPI_EXTRACT_NAME_DWORD_CONST ssdt_pcivga_adr
> >              Name(_ADR, 0xAA0000)
> >              Method(_S1D, 0, NotSerialized) {
> > @@ -88,8 +84,6 @@ DefinitionBlock ("ssdt-pcihp.aml", "SSDT", 0x01, "BXPC", "BXSSDTPCIHP", 0x1)
> >          // Extract the offsets of the device name, address dword and the slot
> >          // name byte - we fill them in for each device.
> >          Device(SDD) {
> > -            ACPI_EXTRACT_NAME_BYTE_CONST ssdt_pciqxl_id
> > -            Name(_SUN, 0xAA)
> >              ACPI_EXTRACT_NAME_DWORD_CONST ssdt_pciqxl_adr
> >              Name(_ADR, 0xAA0000)
> >              Method(_S1D, 0, NotSerialized) {

  reply	other threads:[~2014-02-19 19:04 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-17 14:25 [Qemu-devel] [PULL 0/5] acpi,pc,pci,virtio,memory bug fixes Michael S. Tsirkin
2014-02-17 14:25 ` [Qemu-devel] [PULL 1/5] acpi-build: append description for non-hotplug Michael S. Tsirkin
2014-02-17 14:51   ` Gabriel L. Somlo
2014-02-17 16:44     ` Michael S. Tsirkin
2014-02-19 13:52       ` Peter Maydell
2014-02-19 14:36         ` Michael S. Tsirkin
2014-02-19 13:50     ` Michael S. Tsirkin
2014-02-19 15:24       ` Gabriel L. Somlo
2014-02-19 19:09         ` Michael S. Tsirkin [this message]
2014-02-19 19:02       ` Michael S. Tsirkin
2014-02-19 19:45         ` Gabriel L. Somlo
2014-02-20  5:13           ` Michael S. Tsirkin
2014-02-20 14:22             ` Gabriel L. Somlo
2014-02-20 15:29               ` Michael S. Tsirkin
2014-02-19 16:09     ` Alex Williamson
2014-02-17 14:25 ` [Qemu-devel] [PULL 2/5] acpi-test-data: update expected files Michael S. Tsirkin
2014-02-17 14:25 ` [Qemu-devel] [PULL 3/5] virtio-net: remove function calls from assert Michael S. Tsirkin
2014-02-17 14:25 ` [Qemu-devel] [PULL 4/5] memory_region_present: return false if address is not found in child MemoryRegion Michael S. Tsirkin
2014-02-17 14:25 ` [Qemu-devel] [PULL 5/5] PCIE: fix regression with coldplugged multifunction device Michael S. Tsirkin
2014-02-19 14:35 ` [Qemu-devel] [PULL 0/5] acpi,pc,pci,virtio,memory bug fixes Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140219190916.GB24622@redhat.com \
    --to=mst@redhat.com \
    --cc=aliguori@amazon.com \
    --cc=gsomlo@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.