[PATCH net-next 0/5] Misc. fixes for cxgb4

[PATCH net-next 0/5] Misc. fixes for cxgb4

[Hariprasad Shenai]

Hi All,

This patch series provides miscelleneous fixes for Chelsio T4/T5 adapters
cxgb4 driver related to SGE and MTU.

Also fixes regression in LSO calcuation path.
("cxgb4: Calculate len properly for LSO path")

The patches series is created against David Miller's 'net-next' tree.
And includes patches on cxgb4 driver.

We would like to request this patch series to get merged via David Miller's
'net-next' tree.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.

Kumar Sanghvi (5):
  cxgb4: Fix some small bugs in t4_sge_init_soft() when our Page Size is
    64KB
  cxgb4: Add code to dump SGE registers when hitting idma hangs
  cxgb4: Rectify emitting messages about SGE Ingress DMA channels being
    potentially stuck
  cxgb4: Updates for T5 SGE's Egress Congestion Threshold
  cxgb4: Calculate len properly for LSO path

 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h   |  10 ++-
 drivers/net/ethernet/chelsio/cxgb4/sge.c     | 122 +++++++++++++++++++++------
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c   | 106 +++++++++++++++++++++++
 drivers/net/ethernet/chelsio/cxgb4/t4_regs.h |   9 ++
 4 files changed, 219 insertions(+), 28 deletions(-)

-- 
1.8.4

[PATCH net-next 1/5] cxgb4: Fix some small bugs in t4_sge_init_soft() when our Page Size is 64KB

[Hariprasad Shenai]

From: Kumar Sanghvi <kumaras@chelsio.com>

We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and the
extant logic would flag that as an error.

Based on original work by Casey Leedom <leedom@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
 drivers/net/ethernet/chelsio/cxgb4/sge.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index af76b25..3a2ecd8 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2596,11 +2596,19 @@ static int t4_sge_init_soft(struct adapter *adap)
 	fl_small_mtu = READ_FL_BUF(RX_SMALL_MTU_BUF);
 	fl_large_mtu = READ_FL_BUF(RX_LARGE_MTU_BUF);
 
+	/* We only bother using the Large Page logic if the Large Page Buffer
+	 * is larger than our Page Size Buffer.
+	 */
+	if (fl_large_pg <= fl_small_pg)
+		fl_large_pg = 0;
+
 	#undef READ_FL_BUF
 
+	/* The Page Size Buffer must be exactly equal to our Page Size and the
+	 * Large Page Size Buffer should be 0 (per above) or a power of 2.
+	 */
 	if (fl_small_pg != PAGE_SIZE ||
-	    (fl_large_pg != 0 && (fl_large_pg < fl_small_pg ||
-				  (fl_large_pg & (fl_large_pg-1)) != 0))) {
+	    (fl_large_pg & (fl_large_pg-1)) != 0) {
 		dev_err(adap->pdev_dev, "bad SGE FL page buffer sizes [%d, %d]\n",
 			fl_small_pg, fl_large_pg);
 		return -EINVAL;
-- 
1.8.4

[PATCH net-next 2/5] cxgb4: Add code to dump SGE registers when hitting idma hangs

[Hariprasad Shenai]

From: Kumar Sanghvi <kumaras@chelsio.com>

Based on original work by Casey Leedom <leedom@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h   |   1 +
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c   | 106 +++++++++++++++++++++++++++
 drivers/net/ethernet/chelsio/cxgb4/t4_regs.h |   3 +
 3 files changed, 110 insertions(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 944f2cb..509c976 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -1032,4 +1032,5 @@ void t4_db_dropped(struct adapter *adapter);
 int t4_mem_win_read_len(struct adapter *adap, u32 addr, __be32 *data, int len);
 int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox,
 			 u32 addr, u32 val);
+void t4_sge_decode_idma_state(struct adapter *adapter, int state);
 #endif /* __CXGB4_H__ */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index d3c2a51..fb2fe65 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2597,6 +2597,112 @@ int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
 }
 
 /**
+ *	t4_sge_decode_idma_state - decode the idma state
+ *	@adap: the adapter
+ *	@state: the state idma is stuck in
+ */
+void t4_sge_decode_idma_state(struct adapter *adapter, int state)
+{
+	static const char * const t4_decode[] = {
+		"IDMA_IDLE",
+		"IDMA_PUSH_MORE_CPL_FIFO",
+		"IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
+		"Not used",
+		"IDMA_PHYSADDR_SEND_PCIEHDR",
+		"IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
+		"IDMA_PHYSADDR_SEND_PAYLOAD",
+		"IDMA_SEND_FIFO_TO_IMSG",
+		"IDMA_FL_REQ_DATA_FL_PREP",
+		"IDMA_FL_REQ_DATA_FL",
+		"IDMA_FL_DROP",
+		"IDMA_FL_H_REQ_HEADER_FL",
+		"IDMA_FL_H_SEND_PCIEHDR",
+		"IDMA_FL_H_PUSH_CPL_FIFO",
+		"IDMA_FL_H_SEND_CPL",
+		"IDMA_FL_H_SEND_IP_HDR_FIRST",
+		"IDMA_FL_H_SEND_IP_HDR",
+		"IDMA_FL_H_REQ_NEXT_HEADER_FL",
+		"IDMA_FL_H_SEND_NEXT_PCIEHDR",
+		"IDMA_FL_H_SEND_IP_HDR_PADDING",
+		"IDMA_FL_D_SEND_PCIEHDR",
+		"IDMA_FL_D_SEND_CPL_AND_IP_HDR",
+		"IDMA_FL_D_REQ_NEXT_DATA_FL",
+		"IDMA_FL_SEND_PCIEHDR",
+		"IDMA_FL_PUSH_CPL_FIFO",
+		"IDMA_FL_SEND_CPL",
+		"IDMA_FL_SEND_PAYLOAD_FIRST",
+		"IDMA_FL_SEND_PAYLOAD",
+		"IDMA_FL_REQ_NEXT_DATA_FL",
+		"IDMA_FL_SEND_NEXT_PCIEHDR",
+		"IDMA_FL_SEND_PADDING",
+		"IDMA_FL_SEND_COMPLETION_TO_IMSG",
+		"IDMA_FL_SEND_FIFO_TO_IMSG",
+		"IDMA_FL_REQ_DATAFL_DONE",
+		"IDMA_FL_REQ_HEADERFL_DONE",
+	};
+	static const char * const t5_decode[] = {
+		"IDMA_IDLE",
+		"IDMA_ALMOST_IDLE",
+		"IDMA_PUSH_MORE_CPL_FIFO",
+		"IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
+		"IDMA_SGEFLRFLUSH_SEND_PCIEHDR",
+		"IDMA_PHYSADDR_SEND_PCIEHDR",
+		"IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
+		"IDMA_PHYSADDR_SEND_PAYLOAD",
+		"IDMA_SEND_FIFO_TO_IMSG",
+		"IDMA_FL_REQ_DATA_FL",
+		"IDMA_FL_DROP",
+		"IDMA_FL_DROP_SEND_INC",
+		"IDMA_FL_H_REQ_HEADER_FL",
+		"IDMA_FL_H_SEND_PCIEHDR",
+		"IDMA_FL_H_PUSH_CPL_FIFO",
+		"IDMA_FL_H_SEND_CPL",
+		"IDMA_FL_H_SEND_IP_HDR_FIRST",
+		"IDMA_FL_H_SEND_IP_HDR",
+		"IDMA_FL_H_REQ_NEXT_HEADER_FL",
+		"IDMA_FL_H_SEND_NEXT_PCIEHDR",
+		"IDMA_FL_H_SEND_IP_HDR_PADDING",
+		"IDMA_FL_D_SEND_PCIEHDR",
+		"IDMA_FL_D_SEND_CPL_AND_IP_HDR",
+		"IDMA_FL_D_REQ_NEXT_DATA_FL",
+		"IDMA_FL_SEND_PCIEHDR",
+		"IDMA_FL_PUSH_CPL_FIFO",
+		"IDMA_FL_SEND_CPL",
+		"IDMA_FL_SEND_PAYLOAD_FIRST",
+		"IDMA_FL_SEND_PAYLOAD",
+		"IDMA_FL_REQ_NEXT_DATA_FL",
+		"IDMA_FL_SEND_NEXT_PCIEHDR",
+		"IDMA_FL_SEND_PADDING",
+		"IDMA_FL_SEND_COMPLETION_TO_IMSG",
+	};
+	static const u32 sge_regs[] = {
+		SGE_DEBUG_DATA_LOW_INDEX_2,
+		SGE_DEBUG_DATA_LOW_INDEX_3,
+		SGE_DEBUG_DATA_HIGH_INDEX_10,
+	};
+	const char **sge_idma_decode;
+	int sge_idma_decode_nstates;
+	int i;
+
+	if (is_t4(adapter->params.chip)) {
+		sge_idma_decode = (const char **)t4_decode;
+		sge_idma_decode_nstates = ARRAY_SIZE(t4_decode);
+	} else {
+		sge_idma_decode = (const char **)t5_decode;
+		sge_idma_decode_nstates = ARRAY_SIZE(t5_decode);
+	}
+
+	if (state < sge_idma_decode_nstates)
+		CH_WARN(adapter, "idma state %s\n", sge_idma_decode[state]);
+	else
+		CH_WARN(adapter, "idma state %d unknown\n", state);
+
+	for (i = 0; i < ARRAY_SIZE(sge_regs); i++)
+		CH_WARN(adapter, "SGE register %#x value %#x\n",
+			sge_regs[i], t4_read_reg(adapter, sge_regs[i]));
+}
+
+/**
  *      t4_fw_hello - establish communication with FW
  *      @adap: the adapter
  *      @mbox: mailbox to use for the FW command
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
index 4082522..33cf9ef 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
@@ -278,6 +278,9 @@
 #define SGE_DEBUG_INDEX 0x10cc
 #define SGE_DEBUG_DATA_HIGH 0x10d0
 #define SGE_DEBUG_DATA_LOW 0x10d4
+#define SGE_DEBUG_DATA_LOW_INDEX_2	0x12c8
+#define SGE_DEBUG_DATA_LOW_INDEX_3	0x12cc
+#define SGE_DEBUG_DATA_HIGH_INDEX_10	0x12a8
 #define SGE_INGRESS_QUEUES_PER_PAGE_PF 0x10f4
 
 #define S_HP_INT_THRESH    28
-- 
1.8.4

[PATCH net-next 3/5] cxgb4: Rectify emitting messages about SGE Ingress DMA channels being potentially stuck

[Hariprasad Shenai]

From: Kumar Sanghvi <kumaras@chelsio.com>

Based on original work by Casey Leedom <leedom@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h |  9 ++-
 drivers/net/ethernet/chelsio/cxgb4/sge.c   | 90 ++++++++++++++++++++++++------
 2 files changed, 79 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 509c976..50abe1d 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -556,8 +556,13 @@ struct sge {
 	u32 pktshift;               /* padding between CPL & packet data */
 	u32 fl_align;               /* response queue message alignment */
 	u32 fl_starve_thres;        /* Free List starvation threshold */
-	unsigned int starve_thres;
-	u8 idma_state[2];
+
+	/* State variables for detecting an SGE Ingress DMA hang */
+	unsigned int idma_1s_thresh;/* SGE same State Counter 1s threshold */
+	unsigned int idma_stalled[2];/* SGE synthesized stalled timers in HZ */
+	unsigned int idma_state[2]; /* SGE IDMA Hang detect state */
+	unsigned int idma_qid[2];   /* SGE IDMA Hung Ingress Queue ID */
+
 	unsigned int egr_start;
 	unsigned int ingr_start;
 	void *egr_map[MAX_EGRQ];    /* qid->queue egress queue map */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 3a2ecd8..054bb03 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -93,6 +93,16 @@
  */
 #define TX_QCHECK_PERIOD (HZ / 2)
 
+/* SGE Hung Ingress DMA Threshold Warning time (in Hz) and Warning Repeat Rate
+ * (in RX_QCHECK_PERIOD multiples).  If we find one of the SGE Ingress DMA
+ * State Machines in the same state for this amount of time (in HZ) then we'll
+ * issue a warning about a potential hang.  We'll repeat the warning as the
+ * SGE Ingress DMA Channel appears to be hung every N RX_QCHECK_PERIODs till
+ * the situation clears.  If the situation clears, we'll note that as well.
+ */
+#define SGE_IDMA_WARN_THRESH (1 * HZ)
+#define SGE_IDMA_WARN_REPEAT (20 * RX_QCHECK_PERIOD)
+
 /*
  * Max number of Tx descriptors to be reclaimed by the Tx timer.
  */
@@ -2008,7 +2018,7 @@ irq_handler_t t4_intr_handler(struct adapter *adap)
 static void sge_rx_timer_cb(unsigned long data)
 {
 	unsigned long m;
-	unsigned int i, cnt[2];
+	unsigned int i, idma_same_state_cnt[2];
 	struct adapter *adap = (struct adapter *)data;
 	struct sge *s = &adap->sge;
 
@@ -2031,21 +2041,64 @@ static void sge_rx_timer_cb(unsigned long data)
 		}
 
 	t4_write_reg(adap, SGE_DEBUG_INDEX, 13);
-	cnt[0] = t4_read_reg(adap, SGE_DEBUG_DATA_HIGH);
-	cnt[1] = t4_read_reg(adap, SGE_DEBUG_DATA_LOW);
-
-	for (i = 0; i < 2; i++)
-		if (cnt[i] >= s->starve_thres) {
-			if (s->idma_state[i] || cnt[i] == 0xffffffff)
-				continue;
-			s->idma_state[i] = 1;
-			t4_write_reg(adap, SGE_DEBUG_INDEX, 11);
-			m = t4_read_reg(adap, SGE_DEBUG_DATA_LOW) >> (i * 16);
-			dev_warn(adap->pdev_dev,
-				 "SGE idma%u starvation detected for "
-				 "queue %lu\n", i, m & 0xffff);
-		} else if (s->idma_state[i])
-			s->idma_state[i] = 0;
+	idma_same_state_cnt[0] = t4_read_reg(adap, SGE_DEBUG_DATA_HIGH);
+	idma_same_state_cnt[1] = t4_read_reg(adap, SGE_DEBUG_DATA_LOW);
+
+	for (i = 0; i < 2; i++) {
+		u32 debug0, debug11;
+
+		/* If the Ingress DMA Same State Counter ("timer") is less
+		 * than 1s, then we can reset our synthesized Stall Timer and
+		 * continue.  If we have previously emitted warnings about a
+		 * potential stalled Ingress Queue, issue a note indicating
+		 * that the Ingress Queue has resumed forward progress.
+		 */
+		if (idma_same_state_cnt[i] < s->idma_1s_thresh) {
+			if (s->idma_stalled[i] >= SGE_IDMA_WARN_THRESH)
+				CH_WARN(adap, "SGE idma%d, queue%u,resumed after %d sec\n",
+					i, s->idma_qid[i],
+					s->idma_stalled[i]/HZ);
+			s->idma_stalled[i] = 0;
+			continue;
+		}
+
+		/* Synthesize an SGE Ingress DMA Same State Timer in the Hz
+		 * domain.  The first time we get here it'll be because we
+		 * passed the 1s Threshold; each additional time it'll be
+		 * because the RX Timer Callback is being fired on its regular
+		 * schedule.
+		 *
+		 * If the stall is below our Potential Hung Ingress Queue
+		 * Warning Threshold, continue.
+		 */
+		if (s->idma_stalled[i] == 0)
+			s->idma_stalled[i] = HZ;
+		else
+			s->idma_stalled[i] += RX_QCHECK_PERIOD;
+
+		if (s->idma_stalled[i] < SGE_IDMA_WARN_THRESH)
+			continue;
+
+		/* We'll issue a warning every SGE_IDMA_WARN_REPEAT Hz */
+		if (((s->idma_stalled[i] - HZ) % SGE_IDMA_WARN_REPEAT) != 0)
+			continue;
+
+		/* Read and save the SGE IDMA State and Queue ID information.
+		 * We do this every time in case it changes across time ...
+		 */
+		t4_write_reg(adap, SGE_DEBUG_INDEX, 0);
+		debug0 = t4_read_reg(adap, SGE_DEBUG_DATA_LOW);
+		s->idma_state[i] = (debug0 >> (i * 9)) & 0x3f;
+
+		t4_write_reg(adap, SGE_DEBUG_INDEX, 11);
+		debug11 = t4_read_reg(adap, SGE_DEBUG_DATA_LOW);
+		s->idma_qid[i] = (debug11 >> (i * 16)) & 0xffff;
+
+		CH_WARN(adap, "SGE idma%u, queue%u, maybe stuck state%u %dsecs (debug0=%#x, debug11=%#x)\n",
+			i, s->idma_qid[i], s->idma_state[i],
+			s->idma_stalled[i]/HZ, debug0, debug11);
+		t4_sge_decode_idma_state(adap, s->idma_state[i]);
+	}
 
 	mod_timer(&s->rx_timer, jiffies + RX_QCHECK_PERIOD);
 }
@@ -2756,8 +2809,9 @@ int t4_sge_init(struct adapter *adap)
 
 	setup_timer(&s->rx_timer, sge_rx_timer_cb, (unsigned long)adap);
 	setup_timer(&s->tx_timer, sge_tx_timer_cb, (unsigned long)adap);
-	s->starve_thres = core_ticks_per_usec(adap) * 1000000;  /* 1 s */
-	s->idma_state[0] = s->idma_state[1] = 0;
+	s->idma_1s_thresh = core_ticks_per_usec(adap) * 1000000;  /* 1 s */
+	s->idma_stalled[0] = 0;
+	s->idma_stalled[1] = 0;
 	spin_lock_init(&s->intrq_lock);
 
 	return 0;
-- 
1.8.4

[PATCH net-next 4/5] cxgb4: Updates for T5 SGE's Egress Congestion Threshold

[Hariprasad Shenai]

From: Kumar Sanghvi <kumaras@chelsio.com>

Based on original work by Casey Leedom <leedom@chelsio.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
 drivers/net/ethernet/chelsio/cxgb4/sge.c     | 18 +++++++++++++-----
 drivers/net/ethernet/chelsio/cxgb4/t4_regs.h |  6 ++++++
 2 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index 054bb03..a7c56b3 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2776,8 +2776,8 @@ static int t4_sge_init_hard(struct adapter *adap)
 int t4_sge_init(struct adapter *adap)
 {
 	struct sge *s = &adap->sge;
-	u32 sge_control;
-	int ret;
+	u32 sge_control, sge_conm_ctrl;
+	int ret, egress_threshold;
 
 	/*
 	 * Ingress Padding Boundary and Egress Status Page Size are set up by
@@ -2802,10 +2802,18 @@ int t4_sge_init(struct adapter *adap)
 	 * SGE's Egress Congestion Threshold.  If it isn't, then we can get
 	 * stuck waiting for new packets while the SGE is waiting for us to
 	 * give it more Free List entries.  (Note that the SGE's Egress
-	 * Congestion Threshold is in units of 2 Free List pointers.)
+	 * Congestion Threshold is in units of 2 Free List pointers.) For T4,
+	 * there was only a single field to control this.  For T5 there's the
+	 * original field which now only applies to Unpacked Mode Free List
+	 * buffers and a new field which only applies to Packed Mode Free List
+	 * buffers.
 	 */
-	s->fl_starve_thres
-		= EGRTHRESHOLD_GET(t4_read_reg(adap, SGE_CONM_CTRL))*2 + 1;
+	sge_conm_ctrl = t4_read_reg(adap, SGE_CONM_CTRL);
+	if (is_t4(adap->params.chip))
+		egress_threshold = EGRTHRESHOLD_GET(sge_conm_ctrl);
+	else
+		egress_threshold = EGRTHRESHOLDPACKING_GET(sge_conm_ctrl);
+	s->fl_starve_thres = 2*egress_threshold + 1;
 
 	setup_timer(&s->rx_timer, sge_rx_timer_cb, (unsigned long)adap);
 	setup_timer(&s->tx_timer, sge_tx_timer_cb, (unsigned long)adap);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
index 33cf9ef..225ad8a 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
@@ -230,6 +230,12 @@
 #define  EGRTHRESHOLD(x)     ((x) << EGRTHRESHOLDshift)
 #define  EGRTHRESHOLD_GET(x) (((x) & EGRTHRESHOLD_MASK) >> EGRTHRESHOLDshift)
 
+#define EGRTHRESHOLDPACKING_MASK	0x3fU
+#define EGRTHRESHOLDPACKING_SHIFT	14
+#define EGRTHRESHOLDPACKING(x)		((x) << EGRTHRESHOLDPACKING_SHIFT)
+#define EGRTHRESHOLDPACKING_GET(x)	(((x) >> EGRTHRESHOLDPACKING_SHIFT) & \
+					  EGRTHRESHOLDPACKING_MASK)
+
 #define SGE_DBFIFO_STATUS 0x10a4
 #define  HP_INT_THRESH_SHIFT 28
 #define  HP_INT_THRESH_MASK  0xfU
-- 
1.8.4

[PATCH net-next 5/5] cxgb4: Calculate len properly for LSO path

[Hariprasad Shenai]

From: Kumar Sanghvi <kumaras@chelsio.com>

Commit 0034b29 ("cxgb4: Don't assume LSO only uses SGL path in t4_eth_xmit()")
introduced a regression where-in length was calculated wrongly for LSO path,
causing chip hangs.
So, correct the calculation of len.

Fixes: 0034b29 ("cxgb4: Don't assume LSO only uses SGL path in t4_eth_xmit()")
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
 drivers/net/ethernet/chelsio/cxgb4/sge.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index a7c56b3..46429f9 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -1051,7 +1051,6 @@ out_free:	dev_kfree_skb(skb);
 	end = (u64 *)wr + flits;
 
 	len = immediate ? skb->len : 0;
-	len += sizeof(*cpl);
 	ssi = skb_shinfo(skb);
 	if (ssi->gso_size) {
 		struct cpl_tx_pkt_lso *lso = (void *)wr;
@@ -1079,6 +1078,7 @@ out_free:	dev_kfree_skb(skb);
 		q->tso++;
 		q->tx_cso += ssi->gso_segs;
 	} else {
+		len += sizeof(*cpl);
 		wr->op_immdlen = htonl(FW_WR_OP(FW_ETH_TX_PKT_WR) |
 				       FW_WR_IMMDLEN(len));
 		cpl = (void *)(wr + 1);
-- 
1.8.4

Re: [PATCH net-next 0/5] Misc. fixes for cxgb4

[David Miller]

From: Hariprasad Shenai <hariprasad@chelsio.com>
Date: Thu, 13 Mar 2014 20:50:45 +0530

> This patch series provides miscelleneous fixes for Chelsio T4/T5 adapters
> cxgb4 driver related to SGE and MTU.
> 
> Also fixes regression in LSO calcuation path.
> ("cxgb4: Calculate len properly for LSO path")
> 
> The patches series is created against David Miller's 'net-next' tree.
> And includes patches on cxgb4 driver.
> 
> We would like to request this patch series to get merged via David Miller's
> 'net-next' tree.
> 
> We have included all the maintainers of respective drivers. Kindly review the
> change and let us know in case of any review comments.

Series applied, thanks.