From: Zhangfei Gao <zhangfei.gao@linaro.org> To: "David S. Miller" <davem@davemloft.net> Cc: linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, Zhangfei Gao <zhangfei.gao@linaro.org> Subject: [PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet Date: Tue, 18 Mar 2014 16:40:15 +0800 [thread overview] Message-ID: <1395132017-15928-2-git-send-email-zhangfei.gao@linaro.org> (raw) In-Reply-To: <1395132017-15928-1-git-send-email-zhangfei.gao@linaro.org> This patch adds the Device Tree bindings for the Hisilicon hip04 Ethernet controller, including 100M / 1000M controller. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> --- .../bindings/net/hisilicon-hip04-net.txt | 74 ++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt new file mode 100644 index 0000000..c918f08 --- /dev/null +++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt @@ -0,0 +1,74 @@ +Hisilicon hip04 Ethernet Controller + +* Ethernet controller node + +Required properties: +- compatible: should be "hisilicon,hip04-mac". +- reg: address and length of the register set for the device. +- interrupts: interrupt for the device. +- port: ppe port number connected to the controller: range from 0 to 31. +- speed: 100 (100M) or 1000 (1000M). +- id: should be different and fe should be 0. + +Optional Properties: +- phy-handle : the phandle to a PHY node + + +* Ethernet ppe node: control rx & tx fifos of all ethernet controllers + +Required properties: +- compatible: should be "hisilicon,hip04-ppebase". +- reg: address and length of the register set for the node. + + +* MDIO bus node: + +Required properties: + +- compatible: "hisilicon,hip04-mdio" +- Inherets from MDIO bus node binding[1] +[1] Documentation/devicetree/bindings/net/phy.txt + +Example: + mdio { + compatible = "hisilicon,hip04-mdio"; + reg = <0x28f1000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + marvell,reg-init = <18 0x14 0 0x8001>; + device_type = "ethernet-phy"; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + marvell,reg-init = <18 0x14 0 0x8001>; + device_type = "ethernet-phy"; + }; + }; + + ppebase: ppebase@28c0000 { + compatible = "hisilicon,hip04-ppebase"; + reg = <0x28c0000 0x10000>; + }; + + fe: ethernet@28b0000 { + compatible = "hisilicon,hip04-mac"; + reg = <0x28b0000 0x10000>; + interrupts = <0 413 4>; + port = <31>; + speed = <100>; + id = <0>; + }; + + ge0: ethernet@2800000 { + compatible = "hisilicon,hip04-mac"; + reg = <0x2800000 0x10000>; + interrupts = <0 402 4>; + port = <0>; + speed = <1000>; + id = <1>; + phy-handle = <&phy0>; + }; -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: zhangfei.gao@linaro.org (Zhangfei Gao) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet Date: Tue, 18 Mar 2014 16:40:15 +0800 [thread overview] Message-ID: <1395132017-15928-2-git-send-email-zhangfei.gao@linaro.org> (raw) In-Reply-To: <1395132017-15928-1-git-send-email-zhangfei.gao@linaro.org> This patch adds the Device Tree bindings for the Hisilicon hip04 Ethernet controller, including 100M / 1000M controller. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> --- .../bindings/net/hisilicon-hip04-net.txt | 74 ++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt new file mode 100644 index 0000000..c918f08 --- /dev/null +++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt @@ -0,0 +1,74 @@ +Hisilicon hip04 Ethernet Controller + +* Ethernet controller node + +Required properties: +- compatible: should be "hisilicon,hip04-mac". +- reg: address and length of the register set for the device. +- interrupts: interrupt for the device. +- port: ppe port number connected to the controller: range from 0 to 31. +- speed: 100 (100M) or 1000 (1000M). +- id: should be different and fe should be 0. + +Optional Properties: +- phy-handle : the phandle to a PHY node + + +* Ethernet ppe node: control rx & tx fifos of all ethernet controllers + +Required properties: +- compatible: should be "hisilicon,hip04-ppebase". +- reg: address and length of the register set for the node. + + +* MDIO bus node: + +Required properties: + +- compatible: "hisilicon,hip04-mdio" +- Inherets from MDIO bus node binding[1] +[1] Documentation/devicetree/bindings/net/phy.txt + +Example: + mdio { + compatible = "hisilicon,hip04-mdio"; + reg = <0x28f1000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy at 0 { + reg = <0>; + marvell,reg-init = <18 0x14 0 0x8001>; + device_type = "ethernet-phy"; + }; + + phy1: ethernet-phy at 1 { + reg = <1>; + marvell,reg-init = <18 0x14 0 0x8001>; + device_type = "ethernet-phy"; + }; + }; + + ppebase: ppebase at 28c0000 { + compatible = "hisilicon,hip04-ppebase"; + reg = <0x28c0000 0x10000>; + }; + + fe: ethernet at 28b0000 { + compatible = "hisilicon,hip04-mac"; + reg = <0x28b0000 0x10000>; + interrupts = <0 413 4>; + port = <31>; + speed = <100>; + id = <0>; + }; + + ge0: ethernet at 2800000 { + compatible = "hisilicon,hip04-mac"; + reg = <0x2800000 0x10000>; + interrupts = <0 402 4>; + port = <0>; + speed = <1000>; + id = <1>; + phy-handle = <&phy0>; + }; -- 1.7.9.5
next prev parent reply other threads:[~2014-03-18 8:40 UTC|newest] Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-03-18 8:40 [PATCH 0/3] add hisilicon hip04 ethernet driver Zhangfei Gao 2014-03-18 8:40 ` Zhangfei Gao 2014-03-18 8:40 ` Zhangfei Gao [this message] 2014-03-18 8:40 ` [PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet Zhangfei Gao 2014-03-18 12:34 ` Mark Rutland 2014-03-18 12:34 ` Mark Rutland [not found] ` <20140318123451.GA2941-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org> 2014-03-21 12:59 ` Zhangfei Gao 2014-03-21 12:59 ` Zhangfei Gao 2014-03-18 12:51 ` Sergei Shtylyov 2014-03-18 12:51 ` Sergei Shtylyov 2014-03-21 13:04 ` Zhangfei Gao 2014-03-21 13:04 ` Zhangfei Gao 2014-03-18 17:39 ` Florian Fainelli 2014-03-18 17:39 ` Florian Fainelli 2014-03-20 11:29 ` Zhangfei Gao 2014-03-20 11:29 ` Zhangfei Gao 2014-03-18 8:40 ` [PATCH 2/3] net: hisilicon: new hip04 MDIO driver Zhangfei Gao 2014-03-18 8:40 ` Zhangfei Gao [not found] ` <1395132017-15928-3-git-send-email-zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2014-03-18 17:28 ` Florian Fainelli 2014-03-18 17:28 ` Florian Fainelli 2014-03-20 10:53 ` Zhangfei Gao 2014-03-20 10:53 ` Zhangfei Gao 2014-03-20 17:59 ` Florian Fainelli 2014-03-20 17:59 ` Florian Fainelli 2014-03-21 5:27 ` Zhangfei Gao 2014-03-21 5:27 ` Zhangfei Gao [not found] ` <1395132017-15928-1-git-send-email-zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2014-03-18 8:40 ` [PATCH 3/3] net: hisilicon: new hip04 ethernet driver Zhangfei Gao 2014-03-18 8:40 ` Zhangfei Gao [not found] ` <1395132017-15928-4-git-send-email-zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2014-03-18 10:46 ` Russell King - ARM Linux 2014-03-18 10:46 ` Russell King - ARM Linux 2014-03-20 9:51 ` Zhangfei Gao 2014-03-20 9:51 ` Zhangfei Gao 2014-03-24 14:17 ` Rob Herring 2014-03-24 14:17 ` Rob Herring 2014-03-26 14:22 ` Zhangfei Gao 2014-03-26 14:22 ` Zhangfei Gao 2014-03-18 11:25 ` Arnd Bergmann 2014-03-18 11:25 ` Arnd Bergmann 2014-03-20 14:00 ` Zhangfei Gao 2014-03-20 14:00 ` Zhangfei Gao 2014-03-20 14:31 ` Arnd Bergmann 2014-03-20 14:31 ` Arnd Bergmann [not found] ` <201403201531.20416.arnd-r2nGTMty4D4@public.gmane.org> 2014-03-21 5:19 ` Zhangfei Gao 2014-03-21 5:19 ` Zhangfei Gao 2014-03-21 7:37 ` Arnd Bergmann 2014-03-21 7:37 ` Arnd Bergmann 2014-03-21 7:56 ` Zhangfei Gao 2014-03-21 7:56 ` Zhangfei Gao 2014-03-24 8:17 ` Zhangfei Gao 2014-03-24 8:17 ` Zhangfei Gao 2014-03-24 10:02 ` Arnd Bergmann 2014-03-24 10:02 ` Arnd Bergmann 2014-03-24 13:23 ` Zhangfei Gao 2014-03-24 13:23 ` Zhangfei Gao 2014-03-18 10:27 ` [PATCH 0/3] add hisilicon " Ding Tianhong 2014-03-18 10:27 ` Ding Tianhong 2014-03-21 15:09 [PATCH v2 " Zhangfei Gao 2014-03-21 15:09 ` [PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet Zhangfei Gao 2014-03-21 15:09 ` Zhangfei Gao 2014-03-21 16:42 ` Florian Fainelli 2014-03-21 16:42 ` Florian Fainelli 2014-03-21 18:22 ` Sergei Shtylyov 2014-03-21 18:22 ` Sergei Shtylyov 2014-03-24 14:14 [PATCH v3 0/3] add hisilicon hip04 ethernet driver Zhangfei Gao 2014-03-24 14:14 ` [PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet Zhangfei Gao 2014-03-24 14:14 ` Zhangfei Gao 2014-03-28 15:35 [PATCH v4 0/3] add hisilicon hip04 ethernet driver Zhangfei Gao 2014-03-28 15:35 ` [PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet Zhangfei Gao 2014-03-28 15:35 ` Zhangfei Gao 2014-04-01 13:27 [PATCH v5 0/3] add hisilicon hip04 ethernet driver Zhangfei Gao 2014-04-01 13:27 ` [PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet Zhangfei Gao 2014-04-01 13:27 ` Zhangfei Gao 2014-04-04 15:16 [PATCH v6 0/3] add hisilicon hip04 ethernet driver Zhangfei Gao 2014-04-04 15:16 ` [PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet Zhangfei Gao 2014-04-04 15:16 ` Zhangfei Gao 2014-04-05 4:35 [PATCH v7 0/3] add hisilicon hip04 ethernet driver Zhangfei Gao 2014-04-05 4:35 ` [PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet Zhangfei Gao 2014-04-05 4:35 ` Zhangfei Gao
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1395132017-15928-2-git-send-email-zhangfei.gao@linaro.org \ --to=zhangfei.gao@linaro.org \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=netdev@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.