* [PATCH 00/33] Build ppc64le kernel using ABIv2
@ 2014-03-25 11:44 Anton Blanchard
2014-03-25 11:44 ` [PATCH 01/33] powerpc: No need to use dot symbols when branching to a function Anton Blanchard
` (33 more replies)
0 siblings, 34 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
The following patches allow the kernel to be built using ABIv2 on a
compatible LE toolchain. Module support thanks to Rusty. Thanks also
to Uli for his help with some of assembly issues we tripped up on.
There are two known outstanding issues:
- If a kernel module calls into an exported assembly function
which in turns calls out to C, r2 is going to be wrong. One example
is __copy_tofrom_user_power7.
The reason is _GLOBAL() doesn't have a global entry point setup
with the associated addis/addi used to create r2. I tried adding
it and quickly realised that _GLOBAL is used places that will not
tolerate the addi/addis (eg __start()).
- arch/powerpc/platforms/pseries/hvCall.S assumes we always have a
parameter save area, which is incorrect for ABIv2. I tried to be
intelligent and use the toc save area to store some information
but that failed as soon as we started using modules. It would be
nice to avoid a stack frame in the common (tracepoints disabled)
case, but we may end up having to allocate one.
Anton
--
Anton Blanchard (21):
powerpc: No need to use dot symbols when branching to a function
powerpc: Remove superflous function descriptors in assembly only code
powerpc: Don't use a function descriptor for system call table
powerpc: Remove some unnecessary uses of _GLOBAL() and _STATIC()
powerpc: Remove _INIT_GLOBAL(), _STATIC() and _INIT_STATIC()
powerpc: Remove dot symbol usage in exception macros
powerpc: Create DOTSYM to wrap dot symbol usage
powerpc: Remove function descriptors and dot symbols on new ABI
powerpc: ABIv2 function calls must place target address in r12
powerpc: Ignore TOC relocations
powerpc: Add ABIv2 support to ppc_function_entry
powerpc: Use ppc_function_entry instead of open coding it
powerpc: Fix branch patching code for ABIv2
powerpc: Fix kernel thread creation on ABIv2
powerpc: Fix ABIv2 issues with stack offsets in assembly code
powerpc/tm: Use STK_PARAM
powerpc/tm: Fix GOT save offset for ABIv2
powerpc/tracing: TRACE_WITH_FRAME_BUFFER creates invalid stack frames
powerpc: Fix SMP issues with ppc64le ABIv2
powerpc: Fix ABIv2 issue with dereference_function_descriptor
powerpc: Build little endian ppc64 kernel with ABIv2
Rusty Russell (11):
powerpc: make module stub code endian independent
powerpc: modules implement R_PPC64_TOCSAVE relocation.
powerpc: EXPORT_SYMBOL(.TOC.)
powerpc: module: handle MODVERSION for .TOC.
powerpc: Fix up TOC. for modules.
powerpc: Handle new ELFv2 module relocations
powerpc: modules: comment about de-dotifying symbols when using the
ELFv2 ABI.
powerpc: modules: change r2 save/restore offset for ELFv2 ABI.
powerpc: modules: use r12 for stub jump address.
powerpc: modules: skip r2 setup for ELFv2
powerpc: modules: implement stubs for ELFv2 ABI.
Ulrich Weigand (1):
powerpc: Fix unsafe accesses to parameter area in ELFv2
arch/powerpc/Makefile | 8 +-
arch/powerpc/boot/util.S | 4 +-
arch/powerpc/include/asm/code-patching.h | 40 ++++-
arch/powerpc/include/asm/context_tracking.h | 4 +-
arch/powerpc/include/asm/exception-64e.h | 6 +-
arch/powerpc/include/asm/exception-64s.h | 2 +-
arch/powerpc/include/asm/ftrace.h | 2 +
arch/powerpc/include/asm/irqflags.h | 8 +-
arch/powerpc/include/asm/linkage.h | 2 +
arch/powerpc/include/asm/module.h | 1 +
arch/powerpc/include/asm/ppc_asm.h | 64 ++++----
arch/powerpc/include/asm/sections.h | 2 +
arch/powerpc/include/asm/systbl.h | 6 +-
arch/powerpc/include/uapi/asm/elf.h | 10 +-
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 28 ++--
arch/powerpc/kernel/entry_64.S | 110 ++++++-------
arch/powerpc/kernel/exceptions-64e.S | 140 ++++++++---------
arch/powerpc/kernel/exceptions-64s.S | 204 ++++++++++++-------------
arch/powerpc/kernel/head_64.S | 117 +++++++-------
arch/powerpc/kernel/idle_book3e.S | 2 +-
arch/powerpc/kernel/idle_power4.S | 2 +-
arch/powerpc/kernel/idle_power7.S | 4 +-
arch/powerpc/kernel/misc_64.S | 46 +++++-
arch/powerpc/kernel/module_64.c | 199 ++++++++++++++++++------
arch/powerpc/kernel/process.c | 17 +--
arch/powerpc/kernel/prom_init_check.sh | 2 +-
arch/powerpc/kernel/setup_64.c | 2 +-
arch/powerpc/kernel/systbl.S | 18 ++-
arch/powerpc/kernel/tm.S | 13 +-
arch/powerpc/kvm/book3s_hv_interrupts.S | 2 +-
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 32 ++--
arch/powerpc/lib/copypage_64.S | 2 +-
arch/powerpc/lib/copypage_power7.S | 12 +-
arch/powerpc/lib/copyuser_power7.S | 32 ++--
arch/powerpc/lib/hweight_64.S | 8 +-
arch/powerpc/lib/mem_64.S | 4 +-
arch/powerpc/lib/memcpy_64.S | 8 +-
arch/powerpc/lib/memcpy_power7.S | 26 ++--
arch/powerpc/mm/hash_low_64.S | 44 ++++--
arch/powerpc/mm/hash_utils_64.c | 36 ++---
arch/powerpc/mm/slb.c | 12 +-
arch/powerpc/mm/slb_low.S | 12 +-
arch/powerpc/platforms/85xx/smp.c | 3 +-
arch/powerpc/platforms/cell/smp.c | 5 +-
arch/powerpc/platforms/pasemi/powersave.S | 2 +-
arch/powerpc/platforms/powernv/opal-takeover.S | 2 +
arch/powerpc/platforms/powernv/opal-wrappers.S | 4 +-
arch/powerpc/platforms/powernv/smp.c | 5 +-
arch/powerpc/platforms/pseries/hvCall.S | 4 +-
arch/powerpc/platforms/pseries/smp.c | 5 +-
arch/powerpc/platforms/wsp/scom_smp.c | 3 +-
51 files changed, 760 insertions(+), 566 deletions(-)
--
1.8.3.2
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH 01/33] powerpc: No need to use dot symbols when branching to a function
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 02/33] powerpc: Remove superflous function descriptors in assembly only code Anton Blanchard
` (32 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
binutils is smart enough to know that a branch to a function
descriptor is actually a branch to the functions text address.
Alan tells me that binutils has been doing this for 9 years.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/boot/util.S | 4 +-
arch/powerpc/include/asm/context_tracking.h | 4 +-
arch/powerpc/include/asm/exception-64e.h | 6 +-
arch/powerpc/include/asm/exception-64s.h | 2 +-
arch/powerpc/include/asm/irqflags.h | 4 +-
arch/powerpc/include/asm/ppc_asm.h | 2 +-
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 28 +++---
arch/powerpc/kernel/entry_64.S | 86 ++++++++---------
arch/powerpc/kernel/exceptions-64e.S | 128 +++++++++++++-------------
arch/powerpc/kernel/exceptions-64s.S | 138 ++++++++++++++--------------
arch/powerpc/kernel/head_64.S | 66 ++++++-------
arch/powerpc/kernel/idle_book3e.S | 2 +-
arch/powerpc/kernel/idle_power4.S | 2 +-
arch/powerpc/kernel/idle_power7.S | 4 +-
arch/powerpc/kernel/misc_64.S | 10 +-
arch/powerpc/kvm/book3s_hv_interrupts.S | 2 +-
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 6 +-
arch/powerpc/lib/copypage_64.S | 2 +-
arch/powerpc/lib/copypage_power7.S | 4 +-
arch/powerpc/lib/copyuser_power7.S | 8 +-
arch/powerpc/lib/hweight_64.S | 8 +-
arch/powerpc/lib/mem_64.S | 4 +-
arch/powerpc/lib/memcpy_power7.S | 6 +-
arch/powerpc/mm/hash_low_64.S | 8 +-
arch/powerpc/platforms/pasemi/powersave.S | 2 +-
arch/powerpc/platforms/pseries/hvCall.S | 4 +-
26 files changed, 270 insertions(+), 270 deletions(-)
diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S
index 6636b1d..243b849 100644
--- a/arch/powerpc/boot/util.S
+++ b/arch/powerpc/boot/util.S
@@ -45,7 +45,7 @@ udelay:
mfspr r4,SPRN_PVR
srwi r4,r4,16
cmpwi 0,r4,1 /* 601 ? */
- bne .udelay_not_601
+ bne .Ludelay_not_601
00: li r0,86 /* Instructions / microsecond? */
mtctr r0
10: addi r0,r0,0 /* NOP */
@@ -54,7 +54,7 @@ udelay:
bne 00b
blr
-.udelay_not_601:
+.Ludelay_not_601:
mulli r4,r3,1000 /* nanoseconds */
/* Change r4 to be the number of ticks using:
* (nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns
diff --git a/arch/powerpc/include/asm/context_tracking.h b/arch/powerpc/include/asm/context_tracking.h
index b6f5a33..4001492 100644
--- a/arch/powerpc/include/asm/context_tracking.h
+++ b/arch/powerpc/include/asm/context_tracking.h
@@ -2,9 +2,9 @@
#define _ASM_POWERPC_CONTEXT_TRACKING_H
#ifdef CONFIG_CONTEXT_TRACKING
-#define SCHEDULE_USER bl .schedule_user
+#define SCHEDULE_USER bl schedule_user
#else
-#define SCHEDULE_USER bl .schedule
+#define SCHEDULE_USER bl schedule
#endif
#endif
diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
index a563d9af..a8b52b6 100644
--- a/arch/powerpc/include/asm/exception-64e.h
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -174,10 +174,10 @@ exc_##label##_book3e:
mtlr r16;
#define TLB_MISS_STATS_D(name) \
addi r9,r13,MMSTAT_DSTATS+name; \
- bl .tlb_stat_inc;
+ bl tlb_stat_inc;
#define TLB_MISS_STATS_I(name) \
addi r9,r13,MMSTAT_ISTATS+name; \
- bl .tlb_stat_inc;
+ bl tlb_stat_inc;
#define TLB_MISS_STATS_X(name) \
ld r8,PACA_EXTLB+EX_TLB_ESR(r13); \
cmpdi cr2,r8,-1; \
@@ -185,7 +185,7 @@ exc_##label##_book3e:
addi r9,r13,MMSTAT_DSTATS+name; \
b 62f; \
61: addi r9,r13,MMSTAT_ISTATS+name; \
-62: bl .tlb_stat_inc;
+62: bl tlb_stat_inc;
#define TLB_MISS_STATS_SAVE_INFO \
std r14,EX_TLB_ESR(r12); /* save ESR */
#define TLB_MISS_STATS_SAVE_INFO_BOLTED \
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index aeaa56c..8f35cd7 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -517,7 +517,7 @@ label##_relon_hv: \
#define DISABLE_INTS RECONCILE_IRQ_STATE(r10,r11)
#define ADD_NVGPRS \
- bl .save_nvgprs
+ bl save_nvgprs
#define RUNLATCH_ON \
BEGIN_FTR_SECTION \
diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h
index f51a558..f62c056 100644
--- a/arch/powerpc/include/asm/irqflags.h
+++ b/arch/powerpc/include/asm/irqflags.h
@@ -36,8 +36,8 @@
* have to call a C function so call a wrapper that saves all the
* C-clobbered registers.
*/
-#define TRACE_ENABLE_INTS TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on)
-#define TRACE_DISABLE_INTS TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off)
+#define TRACE_ENABLE_INTS TRACE_WITH_FRAME_BUFFER(trace_hardirqs_on)
+#define TRACE_DISABLE_INTS TRACE_WITH_FRAME_BUFFER(trace_hardirqs_off)
/*
* This is used by assembly code to soft-disable interrupts first and
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 6586a40..3128ba3 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -57,7 +57,7 @@ BEGIN_FW_FTR_SECTION; \
LDX_BE r10,0,r10; /* get log write index */ \
cmpd cr1,r11,r10; \
beq+ cr1,33f; \
- bl .accumulate_stolen_time; \
+ bl accumulate_stolen_time; \
ld r12,_MSR(r1); \
andi. r10,r12,MSR_PR; /* Restore cr0 (coming from user) */ \
33: \
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index cc2d896..4f1393d 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -94,12 +94,12 @@ _GLOBAL(setup_altivec_idle)
_GLOBAL(__setup_cpu_e6500)
mflr r6
#ifdef CONFIG_PPC64
- bl .setup_altivec_ivors
+ bl setup_altivec_ivors
/* Touch IVOR42 only if the CPU supports E.HV category */
mfspr r10,SPRN_MMUCFG
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
beq 1f
- bl .setup_lrat_ivor
+ bl setup_lrat_ivor
1:
#endif
bl setup_pw20_idle
@@ -164,15 +164,15 @@ _GLOBAL(__setup_cpu_e5500)
#ifdef CONFIG_PPC_BOOK3E_64
_GLOBAL(__restore_cpu_e6500)
mflr r5
- bl .setup_altivec_ivors
+ bl setup_altivec_ivors
/* Touch IVOR42 only if the CPU supports E.HV category */
mfspr r10,SPRN_MMUCFG
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
beq 1f
- bl .setup_lrat_ivor
+ bl setup_lrat_ivor
1:
- bl .setup_pw20_idle
- bl .setup_altivec_idle
+ bl setup_pw20_idle
+ bl setup_altivec_idle
bl __restore_cpu_e5500
mtlr r5
blr
@@ -181,9 +181,9 @@ _GLOBAL(__restore_cpu_e5500)
mflr r4
bl __e500_icache_setup
bl __e500_dcache_setup
- bl .__setup_base_ivors
- bl .setup_perfmon_ivor
- bl .setup_doorbell_ivors
+ bl __setup_base_ivors
+ bl setup_perfmon_ivor
+ bl setup_doorbell_ivors
/*
* We only want to touch IVOR38-41 if we're running on hardware
* that supports category E.HV. The architectural way to determine
@@ -192,7 +192,7 @@ _GLOBAL(__restore_cpu_e5500)
mfspr r10,SPRN_MMUCFG
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
beq 1f
- bl .setup_ehv_ivors
+ bl setup_ehv_ivors
1:
mtlr r4
blr
@@ -201,9 +201,9 @@ _GLOBAL(__setup_cpu_e5500)
mflr r5
bl __e500_icache_setup
bl __e500_dcache_setup
- bl .__setup_base_ivors
- bl .setup_perfmon_ivor
- bl .setup_doorbell_ivors
+ bl __setup_base_ivors
+ bl setup_perfmon_ivor
+ bl setup_doorbell_ivors
/*
* We only want to touch IVOR38-41 if we're running on hardware
* that supports category E.HV. The architectural way to determine
@@ -212,7 +212,7 @@ _GLOBAL(__setup_cpu_e5500)
mfspr r10,SPRN_MMUCFG
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
beq 1f
- bl .setup_ehv_ivors
+ bl setup_ehv_ivors
b 2f
1:
ld r10,CPU_SPEC_FEATURES(r4)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 662c6dd..b629198 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -106,7 +106,7 @@ BEGIN_FW_FTR_SECTION
LDX_BE r10,0,r10 /* get log write index */
cmpd cr1,r11,r10
beq+ cr1,33f
- bl .accumulate_stolen_time
+ bl accumulate_stolen_time
REST_GPR(0,r1)
REST_4GPRS(3,r1)
REST_2GPRS(7,r1)
@@ -143,7 +143,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
std r10,SOFTE(r1)
#ifdef SHOW_SYSCALLS
- bl .do_show_syscall
+ bl do_show_syscall
REST_GPR(0,r1)
REST_4GPRS(3,r1)
REST_2GPRS(7,r1)
@@ -181,7 +181,7 @@ system_call: /* label this so stack traces look sane */
syscall_exit:
std r3,RESULT(r1)
#ifdef SHOW_SYSCALLS
- bl .do_show_syscall_exit
+ bl do_show_syscall_exit
ld r3,RESULT(r1)
#endif
CURRENT_THREAD_INFO(r12, r1)
@@ -248,9 +248,9 @@ syscall_error:
/* Traced system call support */
syscall_dotrace:
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_syscall_trace_enter
+ bl do_syscall_trace_enter
/*
* Restore argument registers possibly just changed.
* We use the return value of do_syscall_trace_enter
@@ -308,7 +308,7 @@ syscall_exit_work:
4: /* Anything else left to do? */
SET_DEFAULT_THREAD_PPR(r3, r10) /* Set thread.ppr = 3 */
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
- beq .ret_from_except_lite
+ beq ret_from_except_lite
/* Re-enable interrupts */
#ifdef CONFIG_PPC_BOOK3E
@@ -319,10 +319,10 @@ syscall_exit_work:
mtmsrd r10,1
#endif /* CONFIG_PPC_BOOK3E */
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_syscall_trace_leave
- b .ret_from_except
+ bl do_syscall_trace_leave
+ b ret_from_except
/* Save non-volatile GPRs, if not already saved. */
_GLOBAL(save_nvgprs)
@@ -345,38 +345,38 @@ _GLOBAL(save_nvgprs)
*/
_GLOBAL(ppc_fork)
- bl .save_nvgprs
- bl .sys_fork
+ bl save_nvgprs
+ bl sys_fork
b syscall_exit
_GLOBAL(ppc_vfork)
- bl .save_nvgprs
- bl .sys_vfork
+ bl save_nvgprs
+ bl sys_vfork
b syscall_exit
_GLOBAL(ppc_clone)
- bl .save_nvgprs
- bl .sys_clone
+ bl save_nvgprs
+ bl sys_clone
b syscall_exit
_GLOBAL(ppc32_swapcontext)
- bl .save_nvgprs
- bl .compat_sys_swapcontext
+ bl save_nvgprs
+ bl compat_sys_swapcontext
b syscall_exit
_GLOBAL(ppc64_swapcontext)
- bl .save_nvgprs
- bl .sys_swapcontext
+ bl save_nvgprs
+ bl sys_swapcontext
b syscall_exit
_GLOBAL(ret_from_fork)
- bl .schedule_tail
+ bl schedule_tail
REST_NVGPRS(r1)
li r3,0
b syscall_exit
_GLOBAL(ret_from_kernel_thread)
- bl .schedule_tail
+ bl schedule_tail
REST_NVGPRS(r1)
ld r14, 0(r14)
mtlr r14
@@ -611,7 +611,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
_GLOBAL(ret_from_except)
ld r11,_TRAP(r1)
andi. r0,r11,1
- bne .ret_from_except_lite
+ bne ret_from_except_lite
REST_NVGPRS(r1)
_GLOBAL(ret_from_except_lite)
@@ -661,23 +661,23 @@ _GLOBAL(ret_from_except_lite)
#endif
1: andi. r0,r4,_TIF_NEED_RESCHED
beq 2f
- bl .restore_interrupts
+ bl restore_interrupts
SCHEDULE_USER
- b .ret_from_except_lite
+ b ret_from_except_lite
2:
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
andi. r0,r4,_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM
bne 3f /* only restore TM if nothing else to do */
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .restore_tm_state
+ bl restore_tm_state
b restore
3:
#endif
- bl .save_nvgprs
- bl .restore_interrupts
+ bl save_nvgprs
+ bl restore_interrupts
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_notify_resume
- b .ret_from_except
+ bl do_notify_resume
+ b ret_from_except
resume_kernel:
/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
@@ -730,7 +730,7 @@ resume_kernel:
* sure we are soft-disabled first and reconcile irq state.
*/
RECONCILE_IRQ_STATE(r3,r4)
-1: bl .preempt_schedule_irq
+1: bl preempt_schedule_irq
/* Re-test flags and eventually loop */
CURRENT_THREAD_INFO(r9, r1)
@@ -792,7 +792,7 @@ restore_no_replay:
*/
do_restore:
#ifdef CONFIG_PPC_BOOK3E
- b .exception_return_book3e
+ b exception_return_book3e
#else
/*
* Clear the reservation. If we know the CPU tracks the address of
@@ -907,7 +907,7 @@ restore_check_irq_replay:
*
* Still, this might be useful for things like hash_page
*/
- bl .__check_irq_replay
+ bl __check_irq_replay
cmpwi cr0,r3,0
beq restore_no_replay
@@ -928,13 +928,13 @@ restore_check_irq_replay:
cmpwi cr0,r3,0x500
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
- bl .do_IRQ
- b .ret_from_except
+ bl do_IRQ
+ b ret_from_except
1: cmpwi cr0,r3,0x900
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
- bl .timer_interrupt
- b .ret_from_except
+ bl timer_interrupt
+ b ret_from_except
#ifdef CONFIG_PPC_DOORBELL
1:
#ifdef CONFIG_PPC_BOOK3E
@@ -948,14 +948,14 @@ restore_check_irq_replay:
#endif /* CONFIG_PPC_BOOK3E */
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
- bl .doorbell_exception
- b .ret_from_except
+ bl doorbell_exception
+ b ret_from_except
#endif /* CONFIG_PPC_DOORBELL */
-1: b .ret_from_except /* What else to do here ? */
+1: b ret_from_except /* What else to do here ? */
unrecov_restore:
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
+ bl unrecoverable_exception
b unrecov_restore
#ifdef CONFIG_PPC_RTAS
@@ -1238,7 +1238,7 @@ _GLOBAL(ftrace_graph_caller)
ld r11, 112(r1)
addi r3, r11, 16
- bl .prepare_ftrace_return
+ bl prepare_ftrace_return
nop
ld r0, 128(r1)
@@ -1254,7 +1254,7 @@ _GLOBAL(return_to_handler)
mr r31, r1
stdu r1, -112(r1)
- bl .ftrace_return_to_handler
+ bl ftrace_return_to_handler
nop
/* return value has real return address */
@@ -1284,7 +1284,7 @@ _GLOBAL(mod_return_to_handler)
*/
ld r2, PACATOC(r13)
- bl .ftrace_return_to_handler
+ bl ftrace_return_to_handler
nop
/* return value has real return address */
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index c1bee3c..5e37338 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -499,7 +499,7 @@ exc_##n##_bad_stack: \
CHECK_NAPPING(); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
bl hdlr; \
- b .ret_from_except_lite;
+ b ret_from_except_lite;
/* This value is used to mark exception frames on the stack. */
.section ".toc","aw"
@@ -550,11 +550,11 @@ interrupt_end_book3e:
CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL,
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON_CRIT(0x100)
- bl .save_nvgprs
+ bl save_nvgprs
bl special_reg_save
CHECK_NAPPING();
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unknown_exception
+ bl unknown_exception
b ret_from_crit_except
/* Machine Check Interrupt */
@@ -562,11 +562,11 @@ interrupt_end_book3e:
MC_EXCEPTION_PROLOG(0x000, BOOKE_INTERRUPT_MACHINE_CHECK,
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON_MC(0x000)
- bl .save_nvgprs
+ bl save_nvgprs
bl special_reg_save
CHECK_NAPPING();
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .machine_check_exception
+ bl machine_check_exception
b ret_from_mc_except
/* Data Storage Interrupt */
@@ -612,9 +612,9 @@ interrupt_end_book3e:
std r14,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
ld r14,PACA_EXGEN+EX_R14(r13)
- bl .save_nvgprs
- bl .program_check_exception
- b .ret_from_except
+ bl save_nvgprs
+ bl program_check_exception
+ b ret_from_except
/* Floating Point Unavailable Interrupt */
START_EXCEPTION(fp_unavailable);
@@ -625,13 +625,13 @@ interrupt_end_book3e:
ld r12,_MSR(r1)
andi. r0,r12,MSR_PR;
beq- 1f
- bl .load_up_fpu
+ bl load_up_fpu
b fast_exception_return
1: INTS_DISABLE
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .kernel_fp_unavailable_exception
- b .ret_from_except
+ bl kernel_fp_unavailable_exception
+ b ret_from_except
/* Altivec Unavailable Interrupt */
START_EXCEPTION(altivec_unavailable);
@@ -644,16 +644,16 @@ BEGIN_FTR_SECTION
ld r12,_MSR(r1)
andi. r0,r12,MSR_PR;
beq- 1f
- bl .load_up_altivec
+ bl load_up_altivec
b fast_exception_return
1:
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
INTS_DISABLE
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .altivec_unavailable_exception
- b .ret_from_except
+ bl altivec_unavailable_exception
+ b ret_from_except
/* AltiVec Assist */
START_EXCEPTION(altivec_assist);
@@ -662,16 +662,16 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON(0x220)
INTS_DISABLE
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
- bl .altivec_assist_exception
+ bl altivec_assist_exception
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#else
- bl .unknown_exception
+ bl unknown_exception
#endif
- b .ret_from_except
+ b ret_from_except
/* Decrementer Interrupt */
@@ -687,14 +687,14 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG,
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON_CRIT(0x9f0)
- bl .save_nvgprs
+ bl save_nvgprs
bl special_reg_save
CHECK_NAPPING();
addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_BOOKE_WDT
- bl .WatchdogException
+ bl WatchdogException
#else
- bl .unknown_exception
+ bl unknown_exception
#endif
b ret_from_crit_except
@@ -712,10 +712,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON(0xf20)
INTS_DISABLE
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unknown_exception
- b .ret_from_except
+ bl unknown_exception
+ b ret_from_except
/* Debug exception as a critical interrupt*/
START_EXCEPTION(debug_crit);
@@ -774,9 +774,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
mr r4,r14
ld r14,PACA_EXCRIT+EX_R14(r13)
ld r15,PACA_EXCRIT+EX_R15(r13)
- bl .save_nvgprs
- bl .DebugException
- b .ret_from_except
+ bl save_nvgprs
+ bl DebugException
+ b ret_from_except
kernel_dbg_exc:
b . /* NYI */
@@ -839,9 +839,9 @@ kernel_dbg_exc:
mr r4,r14
ld r14,PACA_EXDBG+EX_R14(r13)
ld r15,PACA_EXDBG+EX_R15(r13)
- bl .save_nvgprs
- bl .DebugException
- b .ret_from_except
+ bl save_nvgprs
+ bl DebugException
+ b ret_from_except
START_EXCEPTION(perfmon);
NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR,
@@ -850,8 +850,8 @@ kernel_dbg_exc:
INTS_DISABLE
CHECK_NAPPING()
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .performance_monitor_exception
- b .ret_from_except_lite
+ bl performance_monitor_exception
+ b ret_from_except_lite
/* Doorbell interrupt */
MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL,
@@ -862,11 +862,11 @@ kernel_dbg_exc:
CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL,
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON_CRIT(0x2a0)
- bl .save_nvgprs
+ bl save_nvgprs
bl special_reg_save
CHECK_NAPPING();
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unknown_exception
+ bl unknown_exception
b ret_from_crit_except
/*
@@ -878,21 +878,21 @@ kernel_dbg_exc:
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON(0x2c0)
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .save_nvgprs
+ bl save_nvgprs
INTS_RESTORE_HARD
- bl .unknown_exception
- b .ret_from_except
+ bl unknown_exception
+ b ret_from_except
/* Guest Doorbell critical Interrupt */
START_EXCEPTION(guest_doorbell_crit);
CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT,
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON_CRIT(0x2e0)
- bl .save_nvgprs
+ bl save_nvgprs
bl special_reg_save
CHECK_NAPPING();
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unknown_exception
+ bl unknown_exception
b ret_from_crit_except
/* Hypervisor call */
@@ -901,10 +901,10 @@ kernel_dbg_exc:
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON(0x310)
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .save_nvgprs
+ bl save_nvgprs
INTS_RESTORE_HARD
- bl .unknown_exception
- b .ret_from_except
+ bl unknown_exception
+ b ret_from_except
/* Embedded Hypervisor priviledged */
START_EXCEPTION(ehpriv);
@@ -912,10 +912,10 @@ kernel_dbg_exc:
PROLOG_ADDITION_NONE)
EXCEPTION_COMMON(0x320)
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .save_nvgprs
+ bl save_nvgprs
INTS_RESTORE_HARD
- bl .unknown_exception
- b .ret_from_except
+ bl unknown_exception
+ b ret_from_except
/* LRAT Error interrupt */
START_EXCEPTION(lrat_error);
@@ -1014,16 +1014,16 @@ storage_fault_common:
mr r5,r15
ld r14,PACA_EXGEN+EX_R14(r13)
ld r15,PACA_EXGEN+EX_R15(r13)
- bl .do_page_fault
+ bl do_page_fault
cmpdi r3,0
bne- 1f
- b .ret_from_except_lite
-1: bl .save_nvgprs
+ b ret_from_except_lite
+1: bl save_nvgprs
mr r5,r3
addi r3,r1,STACK_FRAME_OVERHEAD
ld r4,_DAR(r1)
- bl .bad_page_fault
- b .ret_from_except
+ bl bad_page_fault
+ b ret_from_except
/*
* Alignment exception doesn't fit entirely in the 0x100 bytes so it
@@ -1035,10 +1035,10 @@ alignment_more:
addi r3,r1,STACK_FRAME_OVERHEAD
ld r14,PACA_EXGEN+EX_R14(r13)
ld r15,PACA_EXGEN+EX_R15(r13)
- bl .save_nvgprs
+ bl save_nvgprs
INTS_RESTORE_HARD
- bl .alignment_exception
- b .ret_from_except
+ bl alignment_exception
+ b ret_from_except
/*
* We branch here from entry_64.S for the last stage of the exception
@@ -1172,7 +1172,7 @@ bad_stack_book3e:
std r12,0(r11)
ld r2,PACATOC(r13)
1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .kernel_bad_stack
+ bl kernel_bad_stack
b 1b
/*
@@ -1521,13 +1521,13 @@ _GLOBAL(start_initialization_book3e)
* and always use AS 0, so we just set it up to match our link
* address and never use 0 based addresses.
*/
- bl .initial_tlb_book3e
+ bl initial_tlb_book3e
/* Init global core bits */
- bl .init_core_book3e
+ bl init_core_book3e
/* Init per-thread bits */
- bl .init_thread_book3e
+ bl init_thread_book3e
/* Return to common init code */
tovirt(r28,r28)
@@ -1548,7 +1548,7 @@ _GLOBAL(start_initialization_book3e)
*/
_GLOBAL(book3e_secondary_core_init_tlb_set)
li r4,1
- b .generic_secondary_smp_init
+ b generic_secondary_smp_init
_GLOBAL(book3e_secondary_core_init)
mflr r28
@@ -1558,18 +1558,18 @@ _GLOBAL(book3e_secondary_core_init)
bne 2f
/* Setup TLB for this core */
- bl .initial_tlb_book3e
+ bl initial_tlb_book3e
/* We can return from the above running at a different
* address, so recalculate r2 (TOC)
*/
- bl .relative_toc
+ bl relative_toc
/* Init global core bits */
-2: bl .init_core_book3e
+2: bl init_core_book3e
/* Init per-thread bits */
-3: bl .init_thread_book3e
+3: bl init_thread_book3e
/* Return to common init code at proper virtual address.
*
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 4c34c3c..f0e6c1b 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -139,8 +139,8 @@ BEGIN_FTR_SECTION
#endif
beq cr1,2f
- b .power7_wakeup_noloss
-2: b .power7_wakeup_loss
+ b power7_wakeup_noloss
+2: b power7_wakeup_loss
9:
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
#endif /* CONFIG_PPC_P7_NAP */
@@ -213,7 +213,7 @@ data_access_slb_pSeries:
#endif /* __DISABLED__ */
mfspr r12,SPRN_SRR1
#ifndef CONFIG_RELOCATABLE
- b .slb_miss_realmode
+ b slb_miss_realmode
#else
/*
* We can't just use a direct branch to .slb_miss_realmode
@@ -245,7 +245,7 @@ instruction_access_slb_pSeries:
#endif /* __DISABLED__ */
mfspr r12,SPRN_SRR1
#ifndef CONFIG_RELOCATABLE
- b .slb_miss_realmode
+ b slb_miss_realmode
#else
mfctr r11
ld r10,PACAKBASE(r13)
@@ -831,7 +831,7 @@ data_access_slb_relon_pSeries:
mfspr r3,SPRN_DAR
mfspr r12,SPRN_SRR1
#ifndef CONFIG_RELOCATABLE
- b .slb_miss_realmode
+ b slb_miss_realmode
#else
/*
* We can't just use a direct branch to .slb_miss_realmode
@@ -856,7 +856,7 @@ instruction_access_slb_relon_pSeries:
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
mfspr r12,SPRN_SRR1
#ifndef CONFIG_RELOCATABLE
- b .slb_miss_realmode
+ b slb_miss_realmode
#else
mfctr r11
ld r10,PACAKBASE(r13)
@@ -968,7 +968,7 @@ system_call_entry:
b system_call_common
ppc64_runlatch_on_trampoline:
- b .__ppc64_runlatch_on
+ b __ppc64_runlatch_on
/*
* Here we have detected that the kernel stack pointer is bad.
@@ -1027,7 +1027,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
std r12,RESULT(r1)
std r11,STACK_FRAME_OVERHEAD-16(r1)
1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .kernel_bad_stack
+ bl kernel_bad_stack
b 1b
/*
@@ -1048,7 +1048,7 @@ data_access_common:
ld r3,PACA_EXGEN+EX_DAR(r13)
lwz r4,PACA_EXGEN+EX_DSISR(r13)
li r5,0x300
- b .do_hash_page /* Try to handle as hpte fault */
+ b do_hash_page /* Try to handle as hpte fault */
.align 7
.globl h_data_storage_common
@@ -1058,11 +1058,11 @@ h_data_storage_common:
mfspr r10,SPRN_HDSISR
stw r10,PACA_EXGEN+EX_DSISR(r13)
EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unknown_exception
- b .ret_from_except
+ bl unknown_exception
+ b ret_from_except
.align 7
.globl instruction_access_common
@@ -1073,7 +1073,7 @@ instruction_access_common:
ld r3,_NIP(r1)
andis. r4,r12,0x5820
li r5,0x400
- b .do_hash_page /* Try to handle as hpte fault */
+ b do_hash_page /* Try to handle as hpte fault */
STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
@@ -1090,7 +1090,7 @@ slb_miss_user_common:
stw r9,PACA_EXGEN+EX_CCR(r13)
std r10,PACA_EXGEN+EX_LR(r13)
std r11,PACA_EXGEN+EX_SRR0(r13)
- bl .slb_allocate_user
+ bl slb_allocate_user
ld r10,PACA_EXGEN+EX_LR(r13)
ld r3,PACA_EXGEN+EX_R3(r13)
@@ -1133,9 +1133,9 @@ slb_miss_fault:
unrecov_user_slb:
EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
DISABLE_INTS
- bl .save_nvgprs
+ bl save_nvgprs
1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
+ bl unrecoverable_exception
b 1b
#endif /* __DISABLED__ */
@@ -1160,10 +1160,10 @@ machine_check_common:
lwz r4,PACA_EXGEN+EX_DSISR(r13)
std r3,_DAR(r1)
std r4,_DSISR(r1)
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .machine_check_exception
- b .ret_from_except
+ bl machine_check_exception
+ b ret_from_except
.align 7
.globl alignment_common
@@ -1177,31 +1177,31 @@ alignment_common:
lwz r4,PACA_EXGEN+EX_DSISR(r13)
std r3,_DAR(r1)
std r4,_DSISR(r1)
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .alignment_exception
- b .ret_from_except
+ bl alignment_exception
+ b ret_from_except
.align 7
.globl program_check_common
program_check_common:
EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .program_check_exception
- b .ret_from_except
+ bl program_check_exception
+ b ret_from_except
.align 7
.globl fp_unavailable_common
fp_unavailable_common:
EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
bne 1f /* if from user, just load it up */
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .kernel_fp_unavailable_exception
+ bl kernel_fp_unavailable_exception
BUG_OPCODE
1:
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
@@ -1213,15 +1213,15 @@ BEGIN_FTR_SECTION
bne- 2f
END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
- bl .load_up_fpu
+ bl load_up_fpu
b fast_exception_return
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
2: /* User process was in a transaction */
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .fp_unavailable_tm
- b .ret_from_except
+ bl fp_unavailable_tm
+ b ret_from_except
#endif
.align 7
.globl altivec_unavailable_common
@@ -1239,24 +1239,24 @@ BEGIN_FTR_SECTION
bne- 2f
END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
#endif
- bl .load_up_altivec
+ bl load_up_altivec
b fast_exception_return
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
2: /* User process was in a transaction */
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .altivec_unavailable_tm
- b .ret_from_except
+ bl altivec_unavailable_tm
+ b ret_from_except
#endif
1:
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .altivec_unavailable_exception
- b .ret_from_except
+ bl altivec_unavailable_exception
+ b ret_from_except
.align 7
.globl vsx_unavailable_common
@@ -1274,23 +1274,23 @@ BEGIN_FTR_SECTION
bne- 2f
END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
#endif
- b .load_up_vsx
+ b load_up_vsx
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
2: /* User process was in a transaction */
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .vsx_unavailable_tm
- b .ret_from_except
+ bl vsx_unavailable_tm
+ b ret_from_except
#endif
1:
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif
- bl .save_nvgprs
+ bl save_nvgprs
DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .vsx_unavailable_exception
- b .ret_from_except
+ bl vsx_unavailable_exception
+ b ret_from_except
STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception)
STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, .facility_unavailable_exception)
@@ -1388,9 +1388,9 @@ _GLOBAL(opal_mc_secondary_handler)
machine_check_handle_early:
std r0,GPR0(r1) /* Save r0 */
EXCEPTION_PROLOG_COMMON_3(0x200)
- bl .save_nvgprs
+ bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .machine_check_early
+ bl machine_check_early
ld r12,_MSR(r1)
#ifdef CONFIG_PPC_P7_NAP
/*
@@ -1410,11 +1410,11 @@ machine_check_handle_early:
/* Supervisor state loss */
li r0,1
stb r0,PACA_NAPSTATELOST(r13)
-3: bl .machine_check_queue_event
+3: bl machine_check_queue_event
MACHINE_CHECK_HANDLER_WINDUP
GET_PACA(r13)
ld r1,PACAR1(r13)
- b .power7_enter_nap_mode
+ b power7_enter_nap_mode
4:
#endif
/*
@@ -1446,7 +1446,7 @@ machine_check_handle_early:
andi. r11,r12,MSR_RI
bne 2f
1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
+ bl unrecoverable_exception
b 1b
2:
/*
@@ -1454,7 +1454,7 @@ machine_check_handle_early:
* Queue up the MCE event so that we can log it later, while
* returning from kernel or opal call.
*/
- bl .machine_check_queue_event
+ bl machine_check_queue_event
MACHINE_CHECK_HANDLER_WINDUP
rfid
9:
@@ -1479,7 +1479,7 @@ _GLOBAL(slb_miss_realmode)
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
- bl .slb_allocate_realmode
+ bl slb_allocate_realmode
/* All done -- return from exception. */
@@ -1519,9 +1519,9 @@ _GLOBAL(slb_miss_realmode)
unrecov_slb:
EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
DISABLE_INTS
- bl .save_nvgprs
+ bl save_nvgprs
1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
+ bl unrecoverable_exception
b 1b
@@ -1575,7 +1575,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
*
* at return r3 = 0 for success, 1 for page fault, negative for error
*/
- bl .hash_page /* build HPTE if possible */
+ bl hash_page /* build HPTE if possible */
cmpdi r3,0 /* see if hash_page succeeded */
/* Success */
@@ -1589,35 +1589,35 @@ handle_page_fault:
11: ld r4,_DAR(r1)
ld r5,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_page_fault
+ bl do_page_fault
cmpdi r3,0
beq+ 12f
- bl .save_nvgprs
+ bl save_nvgprs
mr r5,r3
addi r3,r1,STACK_FRAME_OVERHEAD
lwz r4,_DAR(r1)
- bl .bad_page_fault
- b .ret_from_except
+ bl bad_page_fault
+ b ret_from_except
/* We have a data breakpoint exception - handle it */
handle_dabr_fault:
- bl .save_nvgprs
+ bl save_nvgprs
ld r4,_DAR(r1)
ld r5,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_break
-12: b .ret_from_except_lite
+ bl do_break
+12: b ret_from_except_lite
/* We have a page fault that hash_page could handle but HV refused
* the PTE insertion
*/
-13: bl .save_nvgprs
+13: bl save_nvgprs
mr r5,r3
addi r3,r1,STACK_FRAME_OVERHEAD
ld r4,_DAR(r1)
- bl .low_hash_fault
- b .ret_from_except
+ bl low_hash_fault
+ b ret_from_except
/*
* We come here as a result of a DSI at a point where we don't want
@@ -1626,16 +1626,16 @@ handle_dabr_fault:
* were soft-disabled. We want to invoke the exception handler for
* the access, or panic if there isn't a handler.
*/
-77: bl .save_nvgprs
+77: bl save_nvgprs
mr r4,r3
addi r3,r1,STACK_FRAME_OVERHEAD
li r5,SIGSEGV
- bl .bad_page_fault
- b .ret_from_except
+ bl bad_page_fault
+ b ret_from_except
/* here we have a segment miss */
do_ste_alloc:
- bl .ste_allocate /* try to insert stab entry */
+ bl ste_allocate /* try to insert stab entry */
cmpdi r3,0
bne- handle_page_fault
b fast_exception_return
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index b7363bd..afcfd63 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -70,7 +70,7 @@ _GLOBAL(__start)
/* NOP this out unconditionally */
BEGIN_FTR_SECTION
FIXUP_ENDIAN
- b .__start_initialization_multiplatform
+ b __start_initialization_multiplatform
END_FTR_SECTION(0, 1)
/* Catch branch to 0 in real mode */
@@ -186,16 +186,16 @@ _GLOBAL(generic_secondary_thread_init)
mr r24,r3
/* turn on 64-bit mode */
- bl .enable_64b_mode
+ bl enable_64b_mode
/* get a valid TOC pointer, wherever we're mapped at */
- bl .relative_toc
+ bl relative_toc
tovirt(r2,r2)
#ifdef CONFIG_PPC_BOOK3E
/* Book3E initialization */
mr r3,r24
- bl .book3e_secondary_thread_init
+ bl book3e_secondary_thread_init
#endif
b generic_secondary_common_init
@@ -214,17 +214,17 @@ _GLOBAL(generic_secondary_smp_init)
mr r25,r4
/* turn on 64-bit mode */
- bl .enable_64b_mode
+ bl enable_64b_mode
/* get a valid TOC pointer, wherever we're mapped at */
- bl .relative_toc
+ bl relative_toc
tovirt(r2,r2)
#ifdef CONFIG_PPC_BOOK3E
/* Book3E initialization */
mr r3,r24
mr r4,r25
- bl .book3e_secondary_core_init
+ bl book3e_secondary_core_init
#endif
generic_secondary_common_init:
@@ -236,7 +236,7 @@ generic_secondary_common_init:
ld r13,0(r13) /* Get base vaddr of paca array */
#ifndef CONFIG_SMP
addi r13,r13,PACA_SIZE /* know r13 if used accidentally */
- b .kexec_wait /* wait for next kernel if !SMP */
+ b kexec_wait /* wait for next kernel if !SMP */
#else
LOAD_REG_ADDR(r7, nr_cpu_ids) /* Load nr_cpu_ids address */
lwz r7,0(r7) /* also the max paca allocated */
@@ -250,7 +250,7 @@ generic_secondary_common_init:
blt 1b
mr r3,r24 /* not found, copy phys to r3 */
- b .kexec_wait /* next kernel might do better */
+ b kexec_wait /* next kernel might do better */
2: SET_PACA(r13)
#ifdef CONFIG_PPC_BOOK3E
@@ -326,10 +326,10 @@ _STATIC(__mmu_off)
*/
_GLOBAL(__start_initialization_multiplatform)
/* Make sure we are running in 64 bits mode */
- bl .enable_64b_mode
+ bl enable_64b_mode
/* Get TOC pointer (current runtime address) */
- bl .relative_toc
+ bl relative_toc
/* find out where we are now */
bcl 20,31,$+4
@@ -342,7 +342,7 @@ _GLOBAL(__start_initialization_multiplatform)
*/
cmpldi cr0,r5,0
beq 1f
- b .__boot_from_prom /* yes -> prom */
+ b __boot_from_prom /* yes -> prom */
1:
/* Save parameters */
mr r31,r3
@@ -354,8 +354,8 @@ _GLOBAL(__start_initialization_multiplatform)
#endif
#ifdef CONFIG_PPC_BOOK3E
- bl .start_initialization_book3e
- b .__after_prom_start
+ bl start_initialization_book3e
+ b __after_prom_start
#else
/* Setup some critical 970 SPRs before switching MMU off */
mfspr r0,SPRN_PVR
@@ -368,12 +368,12 @@ _GLOBAL(__start_initialization_multiplatform)
beq 1f
cmpwi r0,0x45 /* 970GX */
bne 2f
-1: bl .__cpu_preinit_ppc970
+1: bl __cpu_preinit_ppc970
2:
/* Switch off MMU if not already off */
- bl .__mmu_off
- b .__after_prom_start
+ bl __mmu_off
+ b __after_prom_start
#endif /* CONFIG_PPC_BOOK3E */
_INIT_STATIC(__boot_from_prom)
@@ -395,7 +395,7 @@ _INIT_STATIC(__boot_from_prom)
#ifdef CONFIG_RELOCATABLE
/* Relocate code for where we are now */
mr r3,r26
- bl .relocate
+ bl relocate
#endif
/* Restore parameters */
@@ -407,7 +407,7 @@ _INIT_STATIC(__boot_from_prom)
/* Do all of the interaction with OF client interface */
mr r8,r26
- bl .prom_init
+ bl prom_init
#endif /* #CONFIG_PPC_OF_BOOT_TRAMPOLINE */
/* We never return. We also hit that trap if trying to boot
@@ -424,7 +424,7 @@ _STATIC(__after_prom_start)
bne 1f
add r25,r25,r26
1: mr r3,r25
- bl .relocate
+ bl relocate
#endif
/*
@@ -464,7 +464,7 @@ _STATIC(__after_prom_start)
lis r5,(copy_to_here - _stext)@ha
addi r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */
- bl .copy_and_flush /* copy the first n bytes */
+ bl copy_and_flush /* copy the first n bytes */
/* this includes the code being */
/* executed here. */
addis r8,r3,(4f - _stext)@ha /* Jump to the copy of this code */
@@ -478,9 +478,9 @@ p_end: .llong _end - _stext
4: /* Now copy the rest of the kernel up to _end */
addis r5,r26,(p_end - _stext)@ha
ld r5,(p_end - _stext)@l(r5) /* get _end */
-5: bl .copy_and_flush /* copy the rest */
+5: bl copy_and_flush /* copy the rest */
-9: b .start_here_multiplatform
+9: b start_here_multiplatform
/*
* Copy routine used to copy the kernel to start at physical address 0
@@ -544,7 +544,7 @@ __secondary_start_pmac_0:
_GLOBAL(pmac_secondary_start)
/* turn on 64-bit mode */
- bl .enable_64b_mode
+ bl enable_64b_mode
li r0,0
mfspr r3,SPRN_HID4
@@ -556,11 +556,11 @@ _GLOBAL(pmac_secondary_start)
slbia
/* get TOC pointer (real address) */
- bl .relative_toc
+ bl relative_toc
tovirt(r2,r2)
/* Copy some CPU settings from CPU 0 */
- bl .__restore_cpu_ppc970
+ bl __restore_cpu_ppc970
/* pSeries do that early though I don't think we really need it */
mfmsr r3
@@ -619,7 +619,7 @@ __secondary_start:
std r14,PACAKSAVE(r13)
/* Do early setup for that CPU (stab, slb, hash table pointer) */
- bl .early_setup_secondary
+ bl early_setup_secondary
/*
* setup the new stack pointer, but *don't* use this until
@@ -656,7 +656,7 @@ _GLOBAL(start_secondary_prolog)
ld r2,PACATOC(r13)
li r3,0
std r3,0(r1) /* Zero the stack frame pointer */
- bl .start_secondary
+ bl start_secondary
b .
/*
* Reset stack pointer and call start_secondary
@@ -667,7 +667,7 @@ _GLOBAL(start_secondary_resume)
ld r1,PACAKSAVE(r13) /* Reload kernel stack pointer */
li r3,0
std r3,0(r1) /* Zero the stack frame pointer */
- bl .start_secondary
+ bl start_secondary
b .
#endif
@@ -717,7 +717,7 @@ p_toc: .llong __toc_start + 0x8000 - 0b
*/
_INIT_STATIC(start_here_multiplatform)
/* set up the TOC */
- bl .relative_toc
+ bl relative_toc
tovirt(r2,r2)
/* Clear out the BSS. It may have been done in prom_init,
@@ -776,7 +776,7 @@ _INIT_STATIC(start_here_multiplatform)
/* Restore parameters passed from prom_init/kexec */
mr r3,r31
- bl .early_setup /* also sets r13 and SPRG_PACA */
+ bl early_setup /* also sets r13 and SPRG_PACA */
LOAD_REG_ADDR(r3, .start_here_common)
ld r4,PACAKMSR(r13)
@@ -794,7 +794,7 @@ _INIT_GLOBAL(start_here_common)
ld r2,PACATOC(r13)
/* Do more system initializations in virtual mode */
- bl .setup_system
+ bl setup_system
/* Mark interrupts soft and hard disabled (they might be enabled
* in the PACA when doing hotplug)
@@ -805,7 +805,7 @@ _INIT_GLOBAL(start_here_common)
stb r0,PACAIRQHAPPENED(r13)
/* Generic kernel entry */
- bl .start_kernel
+ bl start_kernel
/* Not reached */
BUG_OPCODE
diff --git a/arch/powerpc/kernel/idle_book3e.S b/arch/powerpc/kernel/idle_book3e.S
index bfb73cc..48c21ac 100644
--- a/arch/powerpc/kernel/idle_book3e.S
+++ b/arch/powerpc/kernel/idle_book3e.S
@@ -43,7 +43,7 @@ _GLOBAL(\name)
*/
#ifdef CONFIG_TRACE_IRQFLAGS
stdu r1,-128(r1)
- bl .trace_hardirqs_on
+ bl trace_hardirqs_on
addi r1,r1,128
#endif
li r0,1
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index e3edaa1..f57a193 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -46,7 +46,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
mflr r0
std r0,16(r1)
stdu r1,-128(r1)
- bl .trace_hardirqs_on
+ bl trace_hardirqs_on
addi r1,r1,128
ld r0,16(r1)
mtlr r0
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 3fdef0f..03a2959 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -47,7 +47,7 @@ _GLOBAL(power7_nap)
/* Make sure FPU, VSX etc... are flushed as we may lose
* state when going to nap mode
*/
- bl .discard_lazy_cpu_state
+ bl discard_lazy_cpu_state
#endif /* CONFIG_SMP */
/* Hard disable interrupts */
@@ -116,7 +116,7 @@ _GLOBAL(power7_wakeup_loss)
_GLOBAL(power7_wakeup_noloss)
lbz r0,PACA_NAPSTATELOST(r13)
cmpwi r0,0
- bne .power7_wakeup_loss
+ bne power7_wakeup_loss
ld r1,PACAR1(r13)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 3d02495..b39cf4a 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -34,7 +34,7 @@ _GLOBAL(call_do_softirq)
std r0,16(r1)
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
mr r1,r3
- bl .__do_softirq
+ bl __do_softirq
ld r1,0(r1)
ld r0,16(r1)
mtlr r0
@@ -45,7 +45,7 @@ _GLOBAL(call_do_irq)
std r0,16(r1)
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
mr r1,r4
- bl .__do_irq
+ bl __do_irq
ld r1,0(r1)
ld r0,16(r1)
mtlr r0
@@ -506,7 +506,7 @@ _GLOBAL(kexec_smp_wait)
stb r4,PACAKEXECSTATE(r13)
SYNC
- b .kexec_wait
+ b kexec_wait
/*
* switch to real mode (turn mmu off)
@@ -576,7 +576,7 @@ _GLOBAL(kexec_sequence)
/* copy dest pages, flush whole dest image */
mr r3,r29
- bl .kexec_copy_flush /* (image) */
+ bl kexec_copy_flush /* (image) */
/* turn off mmu */
bl real_mode
@@ -586,7 +586,7 @@ _GLOBAL(kexec_sequence)
mr r4,r30 /* start, aka phys mem offset */
li r5,0x100
li r6,0
- bl .copy_and_flush /* (dest, src, copy limit, start offset) */
+ bl copy_and_flush /* (dest, src, copy limit, start offset) */
1: /* assume normal blr return */
/* release other cpus to the new kernel secondary start at 0x60 */
diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S
index e873796..5421bac 100644
--- a/arch/powerpc/kvm/book3s_hv_interrupts.S
+++ b/arch/powerpc/kvm/book3s_hv_interrupts.S
@@ -149,7 +149,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
#endif /* CONFIG_SMP */
/* Jump to partition switch code */
- bl .kvmppc_hv_entry_trampoline
+ bl kvmppc_hv_entry_trampoline
nop
/*
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index fbfca57..bb5faff 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1604,7 +1604,7 @@ kvmppc_hdsi:
/* Search the hash table. */
mr r3, r9 /* vcpu pointer */
li r7, 1 /* data fault */
- bl .kvmppc_hpte_hv_fault
+ bl kvmppc_hpte_hv_fault
ld r9, HSTATE_KVM_VCPU(r13)
ld r10, VCPU_PC(r9)
ld r11, VCPU_MSR(r9)
@@ -1678,7 +1678,7 @@ kvmppc_hisi:
mr r4, r10
mr r6, r11
li r7, 0 /* instruction fault */
- bl .kvmppc_hpte_hv_fault
+ bl kvmppc_hpte_hv_fault
ld r9, HSTATE_KVM_VCPU(r13)
ld r10, VCPU_PC(r9)
ld r11, VCPU_MSR(r9)
@@ -2056,7 +2056,7 @@ kvm_cede_exit:
/* Try to handle a machine check in real mode */
machine_check_realmode:
mr r3, r9 /* get vcpu pointer */
- bl .kvmppc_realmode_machine_check
+ bl kvmppc_realmode_machine_check
nop
cmpdi r3, 0 /* continue exiting from guest? */
ld r9, HSTATE_KVM_VCPU(r13)
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index 9f9434a..e59c9c2 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -20,7 +20,7 @@ _GLOBAL(copy_page)
BEGIN_FTR_SECTION
lis r5,PAGE_SIZE@h
FTR_SECTION_ELSE
- b .copypage_power7
+ b copypage_power7
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
ori r5,r5,PAGE_SIZE@l
BEGIN_FTR_SECTION
diff --git a/arch/powerpc/lib/copypage_power7.S b/arch/powerpc/lib/copypage_power7.S
index 395c594..0f1e239 100644
--- a/arch/powerpc/lib/copypage_power7.S
+++ b/arch/powerpc/lib/copypage_power7.S
@@ -60,7 +60,7 @@ _GLOBAL(copypage_power7)
std r4,56(r1)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
- bl .enter_vmx_copy
+ bl enter_vmx_copy
cmpwi r3,0
ld r0,STACKFRAMESIZE+16(r1)
ld r3,STACKFRAMESIZE+48(r1)
@@ -103,7 +103,7 @@ _GLOBAL(copypage_power7)
addi r3,r3,128
bdnz 1b
- b .exit_vmx_copy /* tail call optimise */
+ b exit_vmx_copy /* tail call optimise */
#else
li r0,(PAGE_SIZE/128)
diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
index e8e9c36..62f0540 100644
--- a/arch/powerpc/lib/copyuser_power7.S
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -66,7 +66,7 @@
ld r15,STK_REG(R15)(r1)
ld r14,STK_REG(R14)(r1)
.Ldo_err3:
- bl .exit_vmx_usercopy
+ bl exit_vmx_usercopy
ld r0,STACKFRAMESIZE+16(r1)
mtlr r0
b .Lexit
@@ -295,7 +295,7 @@ err1; stb r0,0(r3)
mflr r0
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
- bl .enter_vmx_usercopy
+ bl enter_vmx_usercopy
cmpwi cr1,r3,0
ld r0,STACKFRAMESIZE+16(r1)
ld r3,STACKFRAMESIZE+48(r1)
@@ -514,7 +514,7 @@ err3; lbz r0,0(r4)
err3; stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
- b .exit_vmx_usercopy /* tail call optimise */
+ b exit_vmx_usercopy /* tail call optimise */
.Lvmx_unaligned_copy:
/* Get the destination 16B aligned */
@@ -717,5 +717,5 @@ err3; lbz r0,0(r4)
err3; stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
- b .exit_vmx_usercopy /* tail call optimise */
+ b exit_vmx_usercopy /* tail call optimise */
#endif /* CONFiG_ALTIVEC */
diff --git a/arch/powerpc/lib/hweight_64.S b/arch/powerpc/lib/hweight_64.S
index 9b96ff2..19e6600 100644
--- a/arch/powerpc/lib/hweight_64.S
+++ b/arch/powerpc/lib/hweight_64.S
@@ -24,7 +24,7 @@
_GLOBAL(__arch_hweight8)
BEGIN_FTR_SECTION
- b .__sw_hweight8
+ b __sw_hweight8
nop
nop
FTR_SECTION_ELSE
@@ -35,7 +35,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB)
_GLOBAL(__arch_hweight16)
BEGIN_FTR_SECTION
- b .__sw_hweight16
+ b __sw_hweight16
nop
nop
nop
@@ -57,7 +57,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB)
_GLOBAL(__arch_hweight32)
BEGIN_FTR_SECTION
- b .__sw_hweight32
+ b __sw_hweight32
nop
nop
nop
@@ -82,7 +82,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB)
_GLOBAL(__arch_hweight64)
BEGIN_FTR_SECTION
- b .__sw_hweight64
+ b __sw_hweight64
nop
nop
nop
diff --git a/arch/powerpc/lib/mem_64.S b/arch/powerpc/lib/mem_64.S
index f4fcb0b..0738f96 100644
--- a/arch/powerpc/lib/mem_64.S
+++ b/arch/powerpc/lib/mem_64.S
@@ -79,8 +79,8 @@ _GLOBAL(memset)
_GLOBAL(memmove)
cmplw 0,r3,r4
- bgt .backwards_memcpy
- b .memcpy
+ bgt backwards_memcpy
+ b memcpy
_GLOBAL(backwards_memcpy)
rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */
diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S
index e4177db..bae3f21 100644
--- a/arch/powerpc/lib/memcpy_power7.S
+++ b/arch/powerpc/lib/memcpy_power7.S
@@ -230,7 +230,7 @@ _GLOBAL(memcpy_power7)
std r5,64(r1)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
- bl .enter_vmx_copy
+ bl enter_vmx_copy
cmpwi cr1,r3,0
ld r0,STACKFRAMESIZE+16(r1)
ld r3,STACKFRAMESIZE+48(r1)
@@ -448,7 +448,7 @@ _GLOBAL(memcpy_power7)
15: addi r1,r1,STACKFRAMESIZE
ld r3,48(r1)
- b .exit_vmx_copy /* tail call optimise */
+ b exit_vmx_copy /* tail call optimise */
.Lvmx_unaligned_copy:
/* Get the destination 16B aligned */
@@ -652,5 +652,5 @@ _GLOBAL(memcpy_power7)
15: addi r1,r1,STACKFRAMESIZE
ld r3,48(r1)
- b .exit_vmx_copy /* tail call optimise */
+ b exit_vmx_copy /* tail call optimise */
#endif /* CONFiG_ALTIVEC */
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 1136d26..8bf7537 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -159,7 +159,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
BEGIN_FTR_SECTION
mr r4,r30
mr r5,r7
- bl .hash_page_do_lazy_icache
+ bl hash_page_do_lazy_icache
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
/* At this point, r3 contains new PP bits, save them in
@@ -471,7 +471,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
BEGIN_FTR_SECTION
mr r4,r30
mr r5,r7
- bl .hash_page_do_lazy_icache
+ bl hash_page_do_lazy_icache
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
/* At this point, r3 contains new PP bits, save them in
@@ -588,7 +588,7 @@ htab_inval_old_hpte:
li r6,MMU_PAGE_64K /* psize */
ld r7,STK_PARAM(R9)(r1) /* ssize */
ld r8,STK_PARAM(R8)(r1) /* local */
- bl .flush_hash_page
+ bl flush_hash_page
/* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
lis r0,_PAGE_HPTE_SUB@h
ori r0,r0,_PAGE_HPTE_SUB@l
@@ -812,7 +812,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
BEGIN_FTR_SECTION
mr r4,r30
mr r5,r7
- bl .hash_page_do_lazy_icache
+ bl hash_page_do_lazy_icache
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
/* At this point, r3 contains new PP bits, save them in
diff --git a/arch/powerpc/platforms/pasemi/powersave.S b/arch/powerpc/platforms/pasemi/powersave.S
index 56f45ad..81ab555 100644
--- a/arch/powerpc/platforms/pasemi/powersave.S
+++ b/arch/powerpc/platforms/pasemi/powersave.S
@@ -66,7 +66,7 @@ sleep_common:
std r3, 48(r1)
/* Only do power savings when in astate 0 */
- bl .check_astate
+ bl check_astate
cmpwi r3,0
bne 1f
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index 444fe77..7891a86 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -49,7 +49,7 @@ END_FTR_SECTION(0, 1); \
std r0,16(r1); \
addi r4,r1,STK_PARAM(FIRST_REG); \
stdu r1,-STACK_FRAME_OVERHEAD(r1); \
- bl .__trace_hcall_entry; \
+ bl __trace_hcall_entry; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
ld r3,STK_PARAM(R3)(r1); \
@@ -83,7 +83,7 @@ END_FTR_SECTION(0, 1); \
mr r3,r6; \
std r0,16(r1); \
stdu r1,-STACK_FRAME_OVERHEAD(r1); \
- bl .__trace_hcall_exit; \
+ bl __trace_hcall_exit; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
ld r3,STK_PARAM(R3)(r1); \
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 02/33] powerpc: Remove superflous function descriptors in assembly only code
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
2014-03-25 11:44 ` [PATCH 01/33] powerpc: No need to use dot symbols when branching to a function Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 03/33] powerpc: Don't use a function descriptor for system call table Anton Blanchard
` (31 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
We have a number of places where we load the text address of a local
function and indirectly branch to it in assembly. Since it is an
indirect branch binutils will not know to use the function text
address, so that trick wont work.
There is no need for these functions to have a function descriptor
so we can replace it with a label and remove the dot symbol.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/kernel/entry_64.S | 10 +++++-----
arch/powerpc/kernel/exceptions-64s.S | 18 +++++++++---------
arch/powerpc/kernel/head_64.S | 9 +++++----
arch/powerpc/platforms/powernv/opal-wrappers.S | 4 ++--
4 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index b629198..2d92eeb 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -1021,7 +1021,7 @@ _GLOBAL(enter_rtas)
std r6,PACASAVEDMSR(r13)
/* Setup our real return addr */
- LOAD_REG_ADDR(r4,.rtas_return_loc)
+ LOAD_REG_ADDR(r4,rtas_return_loc)
clrldi r4,r4,2 /* convert to realmode address */
mtlr r4
@@ -1045,7 +1045,7 @@ _GLOBAL(enter_rtas)
rfid
b . /* prevent speculative execution */
-_STATIC(rtas_return_loc)
+rtas_return_loc:
FIXUP_ENDIAN
/* relocation is off at this point */
@@ -1054,7 +1054,7 @@ _STATIC(rtas_return_loc)
bcl 20,31,$+4
0: mflr r3
- ld r3,(1f-0b)(r3) /* get &.rtas_restore_regs */
+ ld r3,(1f-0b)(r3) /* get &rtas_restore_regs */
mfmsr r6
li r0,MSR_RI
@@ -1071,9 +1071,9 @@ _STATIC(rtas_return_loc)
b . /* prevent speculative execution */
.align 3
-1: .llong .rtas_restore_regs
+1: .llong rtas_restore_regs
-_STATIC(rtas_restore_regs)
+rtas_restore_regs:
/* relocation is on at this point */
REST_GPR(2, r1) /* Restore the TOC */
REST_GPR(13, r1) /* Restore paca */
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index f0e6c1b..7e87b64 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -216,13 +216,13 @@ data_access_slb_pSeries:
b slb_miss_realmode
#else
/*
- * We can't just use a direct branch to .slb_miss_realmode
+ * We can't just use a direct branch to slb_miss_realmode
* because the distance from here to there depends on where
* the kernel ends up being put.
*/
mfctr r11
ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, .slb_miss_realmode)
+ LOAD_HANDLER(r10, slb_miss_realmode)
mtctr r10
bctr
#endif
@@ -249,7 +249,7 @@ instruction_access_slb_pSeries:
#else
mfctr r11
ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, .slb_miss_realmode)
+ LOAD_HANDLER(r10, slb_miss_realmode)
mtctr r10
bctr
#endif
@@ -526,7 +526,7 @@ do_stab_bolted_pSeries:
std r12,PACA_EXSLB+EX_R12(r13)
GET_SCRATCH0(r10)
std r10,PACA_EXSLB+EX_R13(r13)
- EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted, EXC_STD)
+ EXCEPTION_PROLOG_PSERIES_1(do_stab_bolted, EXC_STD)
KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300)
KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380)
@@ -834,13 +834,13 @@ data_access_slb_relon_pSeries:
b slb_miss_realmode
#else
/*
- * We can't just use a direct branch to .slb_miss_realmode
+ * We can't just use a direct branch to slb_miss_realmode
* because the distance from here to there depends on where
* the kernel ends up being put.
*/
mfctr r11
ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, .slb_miss_realmode)
+ LOAD_HANDLER(r10, slb_miss_realmode)
mtctr r10
bctr
#endif
@@ -860,7 +860,7 @@ instruction_access_slb_relon_pSeries:
#else
mfctr r11
ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, .slb_miss_realmode)
+ LOAD_HANDLER(r10, slb_miss_realmode)
mtctr r10
bctr
#endif
@@ -1470,7 +1470,7 @@ machine_check_handle_early:
* r3 is saved in paca->slb_r3
* We assume we aren't going to take any exceptions during this procedure.
*/
-_GLOBAL(slb_miss_realmode)
+slb_miss_realmode:
mflr r10
#ifdef CONFIG_RELOCATABLE
mtctr r11
@@ -1648,7 +1648,7 @@ do_ste_alloc:
* We assume (DAR >> 60) == 0xc.
*/
.align 7
-_GLOBAL(do_stab_bolted)
+do_stab_bolted:
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
mfspr r11,SPRN_DAR /* ea */
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index afcfd63..8d7c868 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -639,7 +639,7 @@ __secondary_start:
stb r0,PACAIRQHAPPENED(r13)
/* enable MMU and jump to start_secondary */
- LOAD_REG_ADDR(r3, .start_secondary_prolog)
+ LOAD_REG_ADDR(r3, start_secondary_prolog)
LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
mtspr SPRN_SRR0,r3
@@ -652,7 +652,7 @@ __secondary_start:
* zero the stack back-chain pointer and get the TOC virtual address
* before going into C code.
*/
-_GLOBAL(start_secondary_prolog)
+start_secondary_prolog:
ld r2,PACATOC(r13)
li r3,0
std r3,0(r1) /* Zero the stack frame pointer */
@@ -778,7 +778,7 @@ _INIT_STATIC(start_here_multiplatform)
mr r3,r31
bl early_setup /* also sets r13 and SPRG_PACA */
- LOAD_REG_ADDR(r3, .start_here_common)
+ LOAD_REG_ADDR(r3, start_here_common)
ld r4,PACAKMSR(r13)
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
@@ -786,7 +786,8 @@ _INIT_STATIC(start_here_multiplatform)
b . /* prevent speculative execution */
/* This is where all platforms converge execution */
-_INIT_GLOBAL(start_here_common)
+
+start_here_common:
/* relocation is on at this point */
std r1,PACAKSAVE(r13)
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 75c89df..d559122 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -32,7 +32,7 @@
std r12,PACASAVEDMSR(r13); \
andc r12,r12,r0; \
mtmsrd r12,1; \
- LOAD_REG_ADDR(r0,.opal_return); \
+ LOAD_REG_ADDR(r0,opal_return); \
mtlr r0; \
li r0,MSR_DR|MSR_IR|MSR_LE;\
andc r12,r12,r0; \
@@ -44,7 +44,7 @@
mtspr SPRN_HSRR0,r12; \
hrfid
-_STATIC(opal_return)
+opal_return:
/*
* Fixup endian on OPAL return... we should be able to simplify
* this by instead converting the below trampoline to a set of
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 03/33] powerpc: Don't use a function descriptor for system call table
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
2014-03-25 11:44 ` [PATCH 01/33] powerpc: No need to use dot symbols when branching to a function Anton Blanchard
2014-03-25 11:44 ` [PATCH 02/33] powerpc: Remove superflous function descriptors in assembly only code Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 04/33] powerpc: Remove some unnecessary uses of _GLOBAL() and _STATIC() Anton Blanchard
` (30 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
There is no need to create a function descriptor for the system call
table. By using one we force the system call table into the text
section and it really belongs in the rodata section.
This also removes another use of dot symbols.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/kernel/entry_64.S | 6 +++---
arch/powerpc/kernel/systbl.S | 6 +++++-
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 2d92eeb..2662f02 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -39,8 +39,8 @@
* System calls.
*/
.section ".toc","aw"
-.SYS_CALL_TABLE:
- .tc .sys_call_table[TC],.sys_call_table
+SYS_CALL_TABLE:
+ .tc sys_call_table[TC],sys_call_table
/* This value is used to mark exception frames on the stack. */
exception_marker:
@@ -162,7 +162,7 @@ system_call: /* label this so stack traces look sane */
* Need to vector to 32 Bit or default sys_call_table here,
* based on caller's run-mode / personality.
*/
- ld r11,.SYS_CALL_TABLE@toc(2)
+ ld r11,SYS_CALL_TABLE@toc(2)
andi. r10,r10,_TIF_32BIT
beq 15f
addi r11,r11,8 /* use 32-bit syscall entries */
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index 93219c3..75822f9 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -36,6 +36,8 @@
#define PPC_SYS_SPU(func) PPC_SYS(func)
#define SYSX_SPU(f, f3264, f32) SYSX(f, f3264, f32)
+.section .rodata,"a"
+
#ifdef CONFIG_PPC64
#define sys_sigpending sys_ni_syscall
#define sys_old_getrlimit sys_ni_syscall
@@ -43,5 +45,7 @@
.p2align 3
#endif
-_GLOBAL(sys_call_table)
+.globl sys_call_table
+sys_call_table:
+
#include <asm/systbl.h>
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 04/33] powerpc: Remove some unnecessary uses of _GLOBAL() and _STATIC()
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (2 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 03/33] powerpc: Don't use a function descriptor for system call table Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 05/33] powerpc: Remove _INIT_GLOBAL(), _STATIC() and _INIT_STATIC() Anton Blanchard
` (29 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
There is no need to create a function descriptor for functions
called locally out of assembly.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/kernel/exceptions-64e.S | 4 ++--
arch/powerpc/kernel/exceptions-64s.S | 2 +-
arch/powerpc/kernel/head_64.S | 12 ++++++------
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 5e37338..c8ac8a0 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -1596,14 +1596,14 @@ _GLOBAL(book3e_secondary_thread_init)
mflr r28
b 3b
-_STATIC(init_core_book3e)
+init_core_book3e:
/* Establish the interrupt vector base */
LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
mtspr SPRN_IVPR,r3
sync
blr
-_STATIC(init_thread_book3e)
+init_thread_book3e:
lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
mtspr SPRN_EPCR,r3
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 7e87b64..a695a23 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1538,7 +1538,7 @@ power4_fixup_nap:
* Hash table stuff
*/
.align 7
-_STATIC(do_hash_page)
+do_hash_page:
std r3,_DAR(r1)
std r4,_DSISR(r1)
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 8d7c868..8284124 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -299,7 +299,7 @@ generic_secondary_common_init:
* Assumes we're mapped EA == RA if the MMU is on.
*/
#ifdef CONFIG_PPC_BOOK3S
-_STATIC(__mmu_off)
+__mmu_off:
mfmsr r3
andi. r0,r3,MSR_IR|MSR_DR
beqlr
@@ -324,7 +324,7 @@ _STATIC(__mmu_off)
* DT block, r4 is a physical pointer to the kernel itself
*
*/
-_GLOBAL(__start_initialization_multiplatform)
+__start_initialization_multiplatform:
/* Make sure we are running in 64 bits mode */
bl enable_64b_mode
@@ -376,7 +376,7 @@ _GLOBAL(__start_initialization_multiplatform)
b __after_prom_start
#endif /* CONFIG_PPC_BOOK3E */
-_INIT_STATIC(__boot_from_prom)
+__boot_from_prom:
#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
/* Save parameters */
mr r31,r3
@@ -414,7 +414,7 @@ _INIT_STATIC(__boot_from_prom)
* from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
trap
-_STATIC(__after_prom_start)
+__after_prom_start:
#ifdef CONFIG_RELOCATABLE
/* process relocations for the final address of the kernel */
lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */
@@ -674,7 +674,7 @@ _GLOBAL(start_secondary_resume)
/*
* This subroutine clobbers r11 and r12
*/
-_GLOBAL(enable_64b_mode)
+enable_64b_mode:
mfmsr r11 /* grab the current MSR */
#ifdef CONFIG_PPC_BOOK3E
oris r11,r11,0x8000 /* CM bit set, we'll set ICM later */
@@ -715,7 +715,7 @@ p_toc: .llong __toc_start + 0x8000 - 0b
/*
* This is where the main kernel code starts.
*/
-_INIT_STATIC(start_here_multiplatform)
+start_here_multiplatform:
/* set up the TOC */
bl relative_toc
tovirt(r2,r2)
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 05/33] powerpc: Remove _INIT_GLOBAL(), _STATIC() and _INIT_STATIC()
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (3 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 04/33] powerpc: Remove some unnecessary uses of _GLOBAL() and _STATIC() Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 06/33] powerpc: Remove dot symbol usage in exception macros Anton Blanchard
` (28 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
Now there are no users of _INIT_GLOBAL(), _STATIC() and _INIT_STATIC()
we can remove them.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/include/asm/ppc_asm.h | 38 --------------------------------------
1 file changed, 38 deletions(-)
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 3128ba3..35b23a6 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -209,20 +209,6 @@ name: \
.type GLUE(.,name),@function; \
GLUE(.,name):
-#define _INIT_GLOBAL(name) \
- __REF; \
- .align 2 ; \
- .globl name; \
- .globl GLUE(.,name); \
- .section ".opd","aw"; \
-name: \
- .quad GLUE(.,name); \
- .quad .TOC.@tocbase; \
- .quad 0; \
- .previous; \
- .type GLUE(.,name),@function; \
-GLUE(.,name):
-
#define _KPROBE(name) \
.section ".kprobes.text","a"; \
.align 2 ; \
@@ -237,30 +223,6 @@ name: \
.type GLUE(.,name),@function; \
GLUE(.,name):
-#define _STATIC(name) \
- .section ".text"; \
- .align 2 ; \
- .section ".opd","aw"; \
-name: \
- .quad GLUE(.,name); \
- .quad .TOC.@tocbase; \
- .quad 0; \
- .previous; \
- .type GLUE(.,name),@function; \
-GLUE(.,name):
-
-#define _INIT_STATIC(name) \
- __REF; \
- .align 2 ; \
- .section ".opd","aw"; \
-name: \
- .quad GLUE(.,name); \
- .quad .TOC.@tocbase; \
- .quad 0; \
- .previous; \
- .type GLUE(.,name),@function; \
-GLUE(.,name):
-
#else /* 32-bit */
#define _ENTRY(n) \
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 06/33] powerpc: Remove dot symbol usage in exception macros
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (4 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 05/33] powerpc: Remove _INIT_GLOBAL(), _STATIC() and _INIT_STATIC() Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 07/33] powerpc: Create DOTSYM to wrap dot symbol usage Anton Blanchard
` (27 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
STD_EXCEPTION_COMMON, STD_EXCEPTION_COMMON_ASYNC and
MASKABLE_EXCEPTION branch to the handler, so we can remove
the explicit dot symbol and binutils will do the right thing.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/kernel/exceptions-64e.S | 8 +++----
arch/powerpc/kernel/exceptions-64s.S | 46 ++++++++++++++++++------------------
2 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index c8ac8a0..771b4e9 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -591,7 +591,7 @@ interrupt_end_book3e:
/* External Input Interrupt */
MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL,
- external_input, .do_IRQ, ACK_NONE)
+ external_input, do_IRQ, ACK_NONE)
/* Alignment */
START_EXCEPTION(alignment);
@@ -676,11 +676,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
/* Decrementer Interrupt */
MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER,
- decrementer, .timer_interrupt, ACK_DEC)
+ decrementer, timer_interrupt, ACK_DEC)
/* Fixed Interval Timer Interrupt */
MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT,
- fixed_interval, .unknown_exception, ACK_FIT)
+ fixed_interval, unknown_exception, ACK_FIT)
/* Watchdog Timer Interrupt */
START_EXCEPTION(watchdog);
@@ -855,7 +855,7 @@ kernel_dbg_exc:
/* Doorbell interrupt */
MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL,
- doorbell, .doorbell_exception, ACK_NONE)
+ doorbell, doorbell_exception, ACK_NONE)
/* Doorbell critical Interrupt */
START_EXCEPTION(doorbell_crit);
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index a695a23..ce50e64 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -771,38 +771,38 @@ kvmppc_skip_Hinterrupt:
/*** Common interrupt handlers ***/
- STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
+ STD_EXCEPTION_COMMON(0x100, system_reset, system_reset_exception)
STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ)
- STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt)
- STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt)
+ STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, timer_interrupt)
+ STD_EXCEPTION_COMMON(0x980, hdecrementer, hdec_interrupt)
#ifdef CONFIG_PPC_DOORBELL
- STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .doorbell_exception)
+ STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, doorbell_exception)
#else
- STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .unknown_exception)
+ STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, unknown_exception)
#endif
- STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
- STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
- STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
- STD_EXCEPTION_COMMON(0xe40, emulation_assist, .emulation_assist_interrupt)
- STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xb00, trap_0b, unknown_exception)
+ STD_EXCEPTION_COMMON(0xd00, single_step, single_step_exception)
+ STD_EXCEPTION_COMMON(0xe00, trap_0e, unknown_exception)
+ STD_EXCEPTION_COMMON(0xe40, emulation_assist, emulation_assist_interrupt)
+ STD_EXCEPTION_COMMON(0xe60, hmi_exception, unknown_exception)
#ifdef CONFIG_PPC_DOORBELL
- STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .doorbell_exception)
+ STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, doorbell_exception)
#else
- STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .unknown_exception)
+ STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, unknown_exception)
#endif
- STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception)
- STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
- STD_EXCEPTION_COMMON(0x1502, denorm, .unknown_exception)
+ STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, performance_monitor_exception)
+ STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, instruction_breakpoint_exception)
+ STD_EXCEPTION_COMMON(0x1502, denorm, unknown_exception)
#ifdef CONFIG_ALTIVEC
- STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
+ STD_EXCEPTION_COMMON(0x1700, altivec_assist, altivec_assist_exception)
#else
- STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
+ STD_EXCEPTION_COMMON(0x1700, altivec_assist, unknown_exception)
#endif
#ifdef CONFIG_CBE_RAS
- STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
- STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
- STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
+ STD_EXCEPTION_COMMON(0x1200, cbe_system_error, cbe_system_error_exception)
+ STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, cbe_maintenance_exception)
+ STD_EXCEPTION_COMMON(0x1800, cbe_thermal, cbe_thermal_exception)
#endif /* CONFIG_CBE_RAS */
/*
@@ -1075,7 +1075,7 @@ instruction_access_common:
li r5,0x400
b do_hash_page /* Try to handle as hpte fault */
- STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xe20, h_instr_storage, unknown_exception)
/*
* Here is the common SLB miss user that is used when going to virtual
@@ -1292,8 +1292,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
bl vsx_unavailable_exception
b ret_from_except
- STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception)
- STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, .facility_unavailable_exception)
+ STD_EXCEPTION_COMMON(0xf60, facility_unavailable, facility_unavailable_exception)
+ STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, facility_unavailable_exception)
.align 7
.globl __end_handlers
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 07/33] powerpc: Create DOTSYM to wrap dot symbol usage
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (5 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 06/33] powerpc: Remove dot symbol usage in exception macros Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 08/33] powerpc: Remove function descriptors and dot symbols on new ABI Anton Blanchard
` (26 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
There are a few places we have to use dot symbols with the
current ABI - the syscall table and the kvm hcall table.
Wrap both of these with a new macro called DOTSYM so it will
be easy to transition away from dot symbols in a future ABI.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/include/asm/ppc_asm.h | 2 ++
arch/powerpc/include/asm/systbl.h | 6 +++---
arch/powerpc/kernel/systbl.S | 12 ++++++------
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 26 +++++++++++++-------------
4 files changed, 24 insertions(+), 22 deletions(-)
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 35b23a6..61992d8 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -223,6 +223,8 @@ name: \
.type GLUE(.,name),@function; \
GLUE(.,name):
+#define DOTSYM(a) GLUE(.,a)
+
#else /* 32-bit */
#define _ENTRY(n) \
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 3ddf702..ac062f5 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -62,7 +62,7 @@ COMPAT_SYS_SPU(fcntl)
SYSCALL(ni_syscall)
SYSCALL_SPU(setpgid)
SYSCALL(ni_syscall)
-SYSX(sys_ni_syscall,sys_olduname, sys_olduname)
+SYSX(sys_ni_syscall,sys_olduname,sys_olduname)
SYSCALL_SPU(umask)
SYSCALL_SPU(chroot)
COMPAT_SYS(ustat)
@@ -258,7 +258,7 @@ SYSCALL_SPU(tgkill)
COMPAT_SYS_SPU(utimes)
COMPAT_SYS_SPU(statfs64)
COMPAT_SYS_SPU(fstatfs64)
-SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64)
+SYSX(sys_ni_syscall,ppc_fadvise64_64,ppc_fadvise64_64)
PPC_SYS_SPU(rtas)
OLDSYS(debug_setcontext)
SYSCALL(ni_syscall)
@@ -295,7 +295,7 @@ SYSCALL_SPU(mkdirat)
SYSCALL_SPU(mknodat)
SYSCALL_SPU(fchownat)
COMPAT_SYS_SPU(futimesat)
-SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64)
+SYSX_SPU(sys_newfstatat,sys_fstatat64,sys_fstatat64)
SYSCALL_SPU(unlinkat)
SYSCALL_SPU(renameat)
SYSCALL_SPU(linkat)
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index 75822f9..895c50c 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -17,12 +17,12 @@
#include <asm/ppc_asm.h>
#ifdef CONFIG_PPC64
-#define SYSCALL(func) .llong .sys_##func,.sys_##func
-#define COMPAT_SYS(func) .llong .sys_##func,.compat_sys_##func
-#define PPC_SYS(func) .llong .ppc_##func,.ppc_##func
-#define OLDSYS(func) .llong .sys_ni_syscall,.sys_ni_syscall
-#define SYS32ONLY(func) .llong .sys_ni_syscall,.compat_sys_##func
-#define SYSX(f, f3264, f32) .llong .f,.f3264
+#define SYSCALL(func) .llong DOTSYM(sys_##func),DOTSYM(sys_##func)
+#define COMPAT_SYS(func) .llong DOTSYM(sys_##func),DOTSYM(compat_sys_##func)
+#define PPC_SYS(func) .llong DOTSYM(ppc_##func),DOTSYM(ppc_##func)
+#define OLDSYS(func) .llong DOTSYM(sys_ni_syscall),DOTSYM(sys_ni_syscall)
+#define SYS32ONLY(func) .llong DOTSYM(sys_ni_syscall),DOTSYM(compat_sys_##func)
+#define SYSX(f, f3264, f32) .llong DOTSYM(f),DOTSYM(f3264)
#else
#define SYSCALL(func) .long sys_##func
#define COMPAT_SYS(func) .long sys_##func
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index bb5faff..da59454 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1752,16 +1752,16 @@ hcall_real_fallback:
.globl hcall_real_table
hcall_real_table:
.long 0 /* 0 - unused */
- .long .kvmppc_h_remove - hcall_real_table
- .long .kvmppc_h_enter - hcall_real_table
- .long .kvmppc_h_read - hcall_real_table
+ .long DOTSYM(kvmppc_h_remove) - hcall_real_table
+ .long DOTSYM(kvmppc_h_enter) - hcall_real_table
+ .long DOTSYM(kvmppc_h_read) - hcall_real_table
.long 0 /* 0x10 - H_CLEAR_MOD */
.long 0 /* 0x14 - H_CLEAR_REF */
- .long .kvmppc_h_protect - hcall_real_table
+ .long DOTSYM(kvmppc_h_protect) - hcall_real_table
.long 0 /* 0x1c - H_GET_TCE */
- .long .kvmppc_h_put_tce - hcall_real_table
+ .long DOTSYM(kvmppc_h_put_tce) - hcall_real_table
.long 0 /* 0x24 - H_SET_SPRG0 */
- .long .kvmppc_h_set_dabr - hcall_real_table
+ .long DOTSYM(kvmppc_h_set_dabr) - hcall_real_table
.long 0 /* 0x2c */
.long 0 /* 0x30 */
.long 0 /* 0x34 */
@@ -1777,11 +1777,11 @@ hcall_real_table:
.long 0 /* 0x5c */
.long 0 /* 0x60 */
#ifdef CONFIG_KVM_XICS
- .long .kvmppc_rm_h_eoi - hcall_real_table
- .long .kvmppc_rm_h_cppr - hcall_real_table
- .long .kvmppc_rm_h_ipi - hcall_real_table
+ .long DOTSYM(kvmppc_rm_h_eoi) - hcall_real_table
+ .long DOTSYM(kvmppc_rm_h_cppr) - hcall_real_table
+ .long DOTSYM(kvmppc_rm_h_ipi) - hcall_real_table
.long 0 /* 0x70 - H_IPOLL */
- .long .kvmppc_rm_h_xirr - hcall_real_table
+ .long DOTSYM(kvmppc_rm_h_xirr) - hcall_real_table
#else
.long 0 /* 0x64 - H_EOI */
.long 0 /* 0x68 - H_CPPR */
@@ -1815,7 +1815,7 @@ hcall_real_table:
.long 0 /* 0xd4 */
.long 0 /* 0xd8 */
.long 0 /* 0xdc */
- .long .kvmppc_h_cede - hcall_real_table
+ .long DOTSYM(kvmppc_h_cede) - hcall_real_table
.long 0 /* 0xe4 */
.long 0 /* 0xe8 */
.long 0 /* 0xec */
@@ -1832,11 +1832,11 @@ hcall_real_table:
.long 0 /* 0x118 */
.long 0 /* 0x11c */
.long 0 /* 0x120 */
- .long .kvmppc_h_bulk_remove - hcall_real_table
+ .long DOTSYM(kvmppc_h_bulk_remove) - hcall_real_table
.long 0 /* 0x128 */
.long 0 /* 0x12c */
.long 0 /* 0x130 */
- .long .kvmppc_h_set_xdabr - hcall_real_table
+ .long DOTSYM(kvmppc_h_set_xdabr) - hcall_real_table
hcall_real_table_end:
ignore_hdec:
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 08/33] powerpc: Remove function descriptors and dot symbols on new ABI
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (6 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 07/33] powerpc: Create DOTSYM to wrap dot symbol usage Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 09/33] powerpc: ABIv2 function calls must place target address in r12 Anton Blanchard
` (25 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
ABIv2 doesn't have function descriptors or dot symbols. One
new thing it does add is a function global and a local entry
point, so add that to our _GLOBAL macro.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/include/asm/ftrace.h | 2 ++
arch/powerpc/include/asm/linkage.h | 2 ++
arch/powerpc/include/asm/ppc_asm.h | 22 ++++++++++++++++++++++
3 files changed, 26 insertions(+)
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index 169d039..e366187 100644
--- a/arch/powerpc/include/asm/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -61,6 +61,7 @@ struct dyn_arch_ftrace {
#endif
#if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64) && !defined(__ASSEMBLY__)
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
static inline bool arch_syscall_match_sym_name(const char *sym, const char *name)
{
@@ -72,6 +73,7 @@ static inline bool arch_syscall_match_sym_name(const char *sym, const char *name
*/
return !strcmp(sym + 4, name + 3);
}
+#endif
#endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_PPC64 && !__ASSEMBLY__ */
#endif /* _ASM_POWERPC_FTRACE */
diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h
index b36f650..e3ad5c7 100644
--- a/arch/powerpc/include/asm/linkage.h
+++ b/arch/powerpc/include/asm/linkage.h
@@ -2,6 +2,7 @@
#define _ASM_POWERPC_LINKAGE_H
#ifdef CONFIG_PPC64
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
#define cond_syscall(x) \
asm ("\t.weak " #x "\n\t.set " #x ", sys_ni_syscall\n" \
"\t.weak ." #x "\n\t.set ." #x ", .sys_ni_syscall\n")
@@ -9,5 +10,6 @@
asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \
"\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
#endif
+#endif
#endif /* _ASM_POWERPC_LINKAGE_H */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 61992d8..5394d41 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -192,6 +192,26 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
#define __STK_PARAM(i) (48 + ((i)-3)*8)
#define STK_PARAM(i) __STK_PARAM(__REG_##i)
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+
+#define _GLOBAL(name) \
+ .section ".text"; \
+ .align 2 ; \
+ .type name,@function; \
+ .globl name; \
+name:
+
+#define _KPROBE(name) \
+ .section ".kprobes.text","a"; \
+ .align 2 ; \
+ .type name,@function; \
+ .globl name; \
+name:
+
+#define DOTSYM(a) a
+
+#else
+
#define XGLUE(a,b) a##b
#define GLUE(a,b) XGLUE(a,b)
@@ -225,6 +245,8 @@ GLUE(.,name):
#define DOTSYM(a) GLUE(.,a)
+#endif
+
#else /* 32-bit */
#define _ENTRY(n) \
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 09/33] powerpc: ABIv2 function calls must place target address in r12
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (7 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 08/33] powerpc: Remove function descriptors and dot symbols on new ABI Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 10/33] powerpc: Ignore TOC relocations Anton Blanchard
` (24 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
To establish addressability quickly, ABIv2 requires the target
address of the function being called to be in r12. Fix a number of
places in assembly code that we do indirect function calls.
We need to avoid function descriptors on ABIv2 too.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/kernel/entry_64.S | 4 ++--
arch/powerpc/kernel/head_64.S | 20 +++++++++++---------
arch/powerpc/kernel/misc_64.S | 8 ++++++--
3 files changed, 19 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 2662f02..d23d752 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -174,8 +174,8 @@ system_call: /* label this so stack traces look sane */
clrldi r8,r8,32
15:
slwi r0,r0,4
- ldx r10,r11,r0 /* Fetch system call handler [ptr] */
- mtctr r10
+ ldx r12,r11,r0 /* Fetch system call handler [ptr] */
+ mtctr r12
bctrl /* Call handler */
syscall_exit:
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 8284124..97329a1 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -140,16 +140,18 @@ __secondary_hold:
tovirt(r26,r26)
#endif
/* All secondary cpus wait here until told to start. */
-100: ld r4,__secondary_hold_spinloop-_stext(r26)
- cmpdi 0,r4,0
+100: ld r12,__secondary_hold_spinloop-_stext(r26)
+ cmpdi 0,r12,0
beq 100b
#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
#ifdef CONFIG_PPC_BOOK3E
- tovirt(r4,r4)
+ tovirt(r12,r12)
#endif
- ld r4,0(r4) /* deref function descriptor */
- mtctr r4
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+ ld r12,0(r12) /* deref function descriptor */
+#endif
+ mtctr r12
mr r3,r24
/*
* it may be the case that other platforms have r4 right to
@@ -267,8 +269,8 @@ generic_secondary_common_init:
ld r23,CPU_SPEC_RESTORE(r23)
cmpdi 0,r23,0
beq 3f
- ld r23,0(r23)
- mtctr r23
+ ld r12,0(r23)
+ mtctr r12
bctrl
3: LOAD_REG_ADDR(r3, spinning_secondaries) /* Decrement spinning_secondaries */
@@ -468,8 +470,8 @@ __after_prom_start:
/* this includes the code being */
/* executed here. */
addis r8,r3,(4f - _stext)@ha /* Jump to the copy of this code */
- addi r8,r8,(4f - _stext)@l /* that we just made */
- mtctr r8
+ addi r12,r8,(4f - _stext)@l /* that we just made */
+ mtctr r12
bctr
.balign 8
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index b39cf4a..bda85a1 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -595,8 +595,12 @@ _GLOBAL(kexec_sequence)
stw r6,kexec_flag-1b(5)
/* clear out hardware hash page table and tlb */
- ld r5,0(r27) /* deref function descriptor */
- mtctr r5
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+ ld r12,0(r27) /* deref function descriptor */
+#else
+ mr r12,r27
+#endif
+ mtctr r12
bctrl /* ppc_md.hpte_clear_all(void); */
/*
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 10/33] powerpc: Ignore TOC relocations
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (8 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 09/33] powerpc: ABIv2 function calls must place target address in r12 Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-26 9:36 ` Alan Modra
2014-03-25 11:44 ` [PATCH 11/33] powerpc: Add ABIv2 support to ppc_function_entry Anton Blanchard
` (23 subsequent siblings)
33 siblings, 1 reply; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
The linker fixes up TOC. relocations, so prom_init_check.sh should
ignore them.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/kernel/prom_init_check.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index b0c263d..77aa1e9 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -23,7 +23,7 @@ strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
reloc_got2 kernstart_addr memstart_addr linux_banner _stext
opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry
boot_command_line __prom_init_toc_start __prom_init_toc_end
-btext_setup_display"
+btext_setup_display TOC."
NM="$1"
OBJ="$2"
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 11/33] powerpc: Add ABIv2 support to ppc_function_entry
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (9 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 10/33] powerpc: Ignore TOC relocations Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 12/33] powerpc: Use ppc_function_entry instead of open coding it Anton Blanchard
` (22 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
Skip over the well known global entry point code for ABIv2.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/include/asm/code-patching.h | 40 ++++++++++++++++++++++++++++----
1 file changed, 36 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
index 97e02f9..37991e1 100644
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -42,15 +42,47 @@ void __patch_exception(int exc, unsigned long addr);
} while (0)
#endif
+#define OP_RT_RA_MASK 0xffff0000UL
+#define LIS_R2 0x3c020000UL
+#define ADDIS_R2_R12 0x3c4c0000UL
+#define ADDI_R2_R2 0x38420000UL
+
static inline unsigned long ppc_function_entry(void *func)
{
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64)
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+ u32 *insn = func;
+
+ /*
+ * A PPC64 ABIv2 function may have a local and a global entry
+ * point. We need to use the local entry point when patching
+ * functions, so identify and step over the global entry point
+ * sequence.
+ *
+ * The global entry point sequence is always of the form:
+ *
+ * addis r2,r12,XXXX
+ * addi r2,r2,XXXX
+ *
+ * A linker optimisation may convert the addis to lis:
+ *
+ * lis r2,XXXX
+ * addi r2,r2,XXXX
+ */
+ if ((((*insn & OP_RT_RA_MASK) == ADDIS_R2_R12) ||
+ ((*insn & OP_RT_RA_MASK) == LIS_R2)) &&
+ ((*(insn+1) & OP_RT_RA_MASK) == ADDI_R2_R2))
+ return (unsigned long)(insn + 2);
+ else
+ return (unsigned long)func;
+#else
/*
- * On PPC64 the function pointer actually points to the function's
- * descriptor. The first entry in the descriptor is the address
- * of the function text.
+ * On PPC64 ABIv1 the function pointer actually points to the
+ * function's descriptor. The first entry in the descriptor is the
+ * address of the function text.
*/
return ((func_descr_t *)func)->entry;
+#endif
#else
return (unsigned long)func;
#endif
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 12/33] powerpc: Use ppc_function_entry instead of open coding it
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (10 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 11/33] powerpc: Add ABIv2 support to ppc_function_entry Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 13/33] powerpc: Fix branch patching code for ABIv2 Anton Blanchard
` (21 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
Replace FUNCTION_TEXT with ppc_function_entry which can handle both
ABIv1 and ABIv2.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/mm/hash_utils_64.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index d766d6e..49fc935 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -603,8 +603,6 @@ int remove_section_mapping(unsigned long start, unsigned long end)
}
#endif /* CONFIG_MEMORY_HOTPLUG */
-#define FUNCTION_TEXT(A) ((*(unsigned long *)(A)))
-
static void __init htab_finish_init(void)
{
extern unsigned int *htab_call_hpte_insert1;
@@ -619,31 +617,31 @@ static void __init htab_finish_init(void)
extern unsigned int *ht64_call_hpte_updatepp;
patch_branch(ht64_call_hpte_insert1,
- FUNCTION_TEXT(ppc_md.hpte_insert),
+ ppc_function_entry(ppc_md.hpte_insert),
BRANCH_SET_LINK);
patch_branch(ht64_call_hpte_insert2,
- FUNCTION_TEXT(ppc_md.hpte_insert),
+ ppc_function_entry(ppc_md.hpte_insert),
BRANCH_SET_LINK);
patch_branch(ht64_call_hpte_remove,
- FUNCTION_TEXT(ppc_md.hpte_remove),
+ ppc_function_entry(ppc_md.hpte_remove),
BRANCH_SET_LINK);
patch_branch(ht64_call_hpte_updatepp,
- FUNCTION_TEXT(ppc_md.hpte_updatepp),
+ ppc_function_entry(ppc_md.hpte_updatepp),
BRANCH_SET_LINK);
#endif /* CONFIG_PPC_HAS_HASH_64K */
patch_branch(htab_call_hpte_insert1,
- FUNCTION_TEXT(ppc_md.hpte_insert),
+ ppc_function_entry(ppc_md.hpte_insert),
BRANCH_SET_LINK);
patch_branch(htab_call_hpte_insert2,
- FUNCTION_TEXT(ppc_md.hpte_insert),
+ ppc_function_entry(ppc_md.hpte_insert),
BRANCH_SET_LINK);
patch_branch(htab_call_hpte_remove,
- FUNCTION_TEXT(ppc_md.hpte_remove),
+ ppc_function_entry(ppc_md.hpte_remove),
BRANCH_SET_LINK);
patch_branch(htab_call_hpte_updatepp,
- FUNCTION_TEXT(ppc_md.hpte_updatepp),
+ ppc_function_entry(ppc_md.hpte_updatepp),
BRANCH_SET_LINK);
}
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 13/33] powerpc: Fix branch patching code for ABIv2
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (11 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 12/33] powerpc: Use ppc_function_entry instead of open coding it Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 14/33] powerpc: Fix kernel thread creation on ABIv2 Anton Blanchard
` (20 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
The MMU hashtable and SLB branch patching code uses function
pointers for the update sites. This creates a difference between
ABIv1 and ABIv2 because we don't have function descriptors on
ABIv2.
Get rid of the function pointer and just point at the update
sites directly. This works on both ABIs.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/mm/hash_low_64.S | 36 ++++++++++++++++++++++++------------
arch/powerpc/mm/hash_utils_64.c | 20 +++++++++-----------
arch/powerpc/mm/slb.c | 12 ++++++------
arch/powerpc/mm/slb_low.S | 12 ++++++++----
4 files changed, 47 insertions(+), 33 deletions(-)
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 8bf7537..057cbbb 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -201,7 +201,8 @@ htab_insert_pte:
li r8,MMU_PAGE_4K /* page size */
li r9,MMU_PAGE_4K /* actual page size */
ld r10,STK_PARAM(R9)(r1) /* segment size */
-_GLOBAL(htab_call_hpte_insert1)
+.globl htab_call_hpte_insert1
+htab_call_hpte_insert1:
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
bge htab_pte_insert_ok /* Insertion successful */
@@ -225,7 +226,8 @@ _GLOBAL(htab_call_hpte_insert1)
li r8,MMU_PAGE_4K /* page size */
li r9,MMU_PAGE_4K /* actual page size */
ld r10,STK_PARAM(R9)(r1) /* segment size */
-_GLOBAL(htab_call_hpte_insert2)
+.globl htab_call_hpte_insert2
+htab_call_hpte_insert2:
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
bge+ htab_pte_insert_ok /* Insertion successful */
@@ -242,7 +244,8 @@ _GLOBAL(htab_call_hpte_insert2)
2: and r0,r5,r27
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_remove */
-_GLOBAL(htab_call_hpte_remove)
+.globl htab_call_hpte_remove
+htab_call_hpte_remove:
bl . /* Patched by htab_finish_init() */
/* Try all again */
@@ -296,7 +299,8 @@ htab_modify_pte:
li r7,MMU_PAGE_4K /* actual page size */
ld r8,STK_PARAM(R9)(r1) /* segment size */
ld r9,STK_PARAM(R8)(r1) /* get "local" param */
-_GLOBAL(htab_call_hpte_updatepp)
+.globl htab_call_hpte_updatepp
+htab_call_hpte_updatepp:
bl . /* Patched by htab_finish_init() */
/* if we failed because typically the HPTE wasn't really here
@@ -526,7 +530,8 @@ htab_special_pfn:
li r8,MMU_PAGE_4K /* page size */
li r9,MMU_PAGE_4K /* actual page size */
ld r10,STK_PARAM(R9)(r1) /* segment size */
-_GLOBAL(htab_call_hpte_insert1)
+.globl htab_call_hpte_insert1
+htab_call_hpte_insert1:
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
bge htab_pte_insert_ok /* Insertion successful */
@@ -554,7 +559,8 @@ _GLOBAL(htab_call_hpte_insert1)
li r8,MMU_PAGE_4K /* page size */
li r9,MMU_PAGE_4K /* actual page size */
ld r10,STK_PARAM(R9)(r1) /* segment size */
-_GLOBAL(htab_call_hpte_insert2)
+.globl htab_call_hpte_insert2
+htab_call_hpte_insert2:
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
bge+ htab_pte_insert_ok /* Insertion successful */
@@ -571,7 +577,8 @@ _GLOBAL(htab_call_hpte_insert2)
2: and r0,r5,r27
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_remove */
-_GLOBAL(htab_call_hpte_remove)
+.globl htab_call_hpte_remove
+htab_call_hpte_remove:
bl . /* patched by htab_finish_init() */
/* Try all again */
@@ -660,7 +667,8 @@ htab_modify_pte:
li r7,MMU_PAGE_4K /* actual page size */
ld r8,STK_PARAM(R9)(r1) /* segment size */
ld r9,STK_PARAM(R8)(r1) /* get "local" param */
-_GLOBAL(htab_call_hpte_updatepp)
+.globl htab_call_hpte_updatepp
+htab_call_hpte_updatepp:
bl . /* patched by htab_finish_init() */
/* if we failed because typically the HPTE wasn't really here
@@ -857,7 +865,8 @@ ht64_insert_pte:
li r8,MMU_PAGE_64K
li r9,MMU_PAGE_64K /* actual page size */
ld r10,STK_PARAM(R9)(r1) /* segment size */
-_GLOBAL(ht64_call_hpte_insert1)
+.globl ht64_call_hpte_insert1
+ht64_call_hpte_insert1:
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
bge ht64_pte_insert_ok /* Insertion successful */
@@ -881,7 +890,8 @@ _GLOBAL(ht64_call_hpte_insert1)
li r8,MMU_PAGE_64K
li r9,MMU_PAGE_64K /* actual page size */
ld r10,STK_PARAM(R9)(r1) /* segment size */
-_GLOBAL(ht64_call_hpte_insert2)
+.globl ht64_call_hpte_insert2
+ht64_call_hpte_insert2:
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
bge+ ht64_pte_insert_ok /* Insertion successful */
@@ -898,7 +908,8 @@ _GLOBAL(ht64_call_hpte_insert2)
2: and r0,r5,r27
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_remove */
-_GLOBAL(ht64_call_hpte_remove)
+.globl ht64_call_hpte_remove
+ht64_call_hpte_remove:
bl . /* patched by htab_finish_init() */
/* Try all again */
@@ -952,7 +963,8 @@ ht64_modify_pte:
li r7,MMU_PAGE_64K /* actual page size */
ld r8,STK_PARAM(R9)(r1) /* segment size */
ld r9,STK_PARAM(R8)(r1) /* get "local" param */
-_GLOBAL(ht64_call_hpte_updatepp)
+.globl ht64_call_hpte_updatepp
+ht64_call_hpte_updatepp:
bl . /* patched by htab_finish_init() */
/* if we failed because typically the HPTE wasn't really here
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 49fc935..d685dff 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -603,19 +603,18 @@ int remove_section_mapping(unsigned long start, unsigned long end)
}
#endif /* CONFIG_MEMORY_HOTPLUG */
+extern u32 htab_call_hpte_insert1[];
+extern u32 htab_call_hpte_insert2[];
+extern u32 htab_call_hpte_remove[];
+extern u32 htab_call_hpte_updatepp[];
+extern u32 ht64_call_hpte_insert1[];
+extern u32 ht64_call_hpte_insert2[];
+extern u32 ht64_call_hpte_remove[];
+extern u32 ht64_call_hpte_updatepp[];
+
static void __init htab_finish_init(void)
{
- extern unsigned int *htab_call_hpte_insert1;
- extern unsigned int *htab_call_hpte_insert2;
- extern unsigned int *htab_call_hpte_remove;
- extern unsigned int *htab_call_hpte_updatepp;
-
#ifdef CONFIG_PPC_HAS_HASH_64K
- extern unsigned int *ht64_call_hpte_insert1;
- extern unsigned int *ht64_call_hpte_insert2;
- extern unsigned int *ht64_call_hpte_remove;
- extern unsigned int *ht64_call_hpte_updatepp;
-
patch_branch(ht64_call_hpte_insert1,
ppc_function_entry(ppc_md.hpte_insert),
BRANCH_SET_LINK);
@@ -628,7 +627,6 @@ static void __init htab_finish_init(void)
patch_branch(ht64_call_hpte_updatepp,
ppc_function_entry(ppc_md.hpte_updatepp),
BRANCH_SET_LINK);
-
#endif /* CONFIG_PPC_HAS_HASH_64K */
patch_branch(htab_call_hpte_insert1,
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 9d1d33c..4623366 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -256,10 +256,14 @@ static inline void patch_slb_encoding(unsigned int *insn_addr,
patch_instruction(insn_addr, insn);
}
+extern u32 slb_compare_rr_to_size[];
+extern u32 slb_miss_kernel_load_linear[];
+extern u32 slb_miss_kernel_load_io[];
+extern u32 slb_compare_rr_to_size[];
+extern u32 slb_miss_kernel_load_vmemmap[];
+
void slb_set_size(u16 size)
{
- extern unsigned int *slb_compare_rr_to_size;
-
if (mmu_slb_size == size)
return;
@@ -272,11 +276,7 @@ void slb_initialize(void)
unsigned long linear_llp, vmalloc_llp, io_llp;
unsigned long lflags, vflags;
static int slb_encoding_inited;
- extern unsigned int *slb_miss_kernel_load_linear;
- extern unsigned int *slb_miss_kernel_load_io;
- extern unsigned int *slb_compare_rr_to_size;
#ifdef CONFIG_SPARSEMEM_VMEMMAP
- extern unsigned int *slb_miss_kernel_load_vmemmap;
unsigned long vmemmap_llp;
#endif
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 17aa6df..28cffb6 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -59,7 +59,8 @@ _GLOBAL(slb_allocate_realmode)
/* Linear mapping encoding bits, the "li" instruction below will
* be patched by the kernel at boot
*/
-_GLOBAL(slb_miss_kernel_load_linear)
+.globl slb_miss_kernel_load_linear
+slb_miss_kernel_load_linear:
li r11,0
/*
* context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
@@ -79,7 +80,8 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
/* Check virtual memmap region. To be patches at kernel boot */
cmpldi cr0,r9,0xf
bne 1f
-_GLOBAL(slb_miss_kernel_load_vmemmap)
+.globl slb_miss_kernel_load_vmemmap
+slb_miss_kernel_load_vmemmap:
li r11,0
b 6f
1:
@@ -95,7 +97,8 @@ _GLOBAL(slb_miss_kernel_load_vmemmap)
b 6f
5:
/* IO mapping */
- _GLOBAL(slb_miss_kernel_load_io)
+.globl slb_miss_kernel_load_io
+slb_miss_kernel_load_io:
li r11,0
6:
/*
@@ -250,7 +253,8 @@ slb_finish_load:
7: ld r10,PACASTABRR(r13)
addi r10,r10,1
/* This gets soft patched on boot. */
-_GLOBAL(slb_compare_rr_to_size)
+.globl slb_compare_rr_to_size
+slb_compare_rr_to_size:
cmpldi r10,0
blt+ 4f
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 14/33] powerpc: Fix kernel thread creation on ABIv2
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (12 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 13/33] powerpc: Fix branch patching code for ABIv2 Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 15/33] powerpc: Fix ABIv2 issues with stack offsets in assembly code Anton Blanchard
` (19 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
Change how we setup registers for ret_from_kernel_thread. In
ABIv1, instead of passing a function descriptor in, dereference
it and pass the target in directly.
Use ppc_global_function_entry to get it right on both ABIv1 and ABIv2.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/kernel/entry_64.S | 4 +++-
arch/powerpc/kernel/process.c | 17 +++++------------
2 files changed, 8 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d23d752..cf4f6e6 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -378,9 +378,11 @@ _GLOBAL(ret_from_fork)
_GLOBAL(ret_from_kernel_thread)
bl schedule_tail
REST_NVGPRS(r1)
- ld r14, 0(r14)
mtlr r14
mr r3,r15
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+ mr r12,r14
+#endif
blrl
li r3,0
b syscall_exit
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index af064d2..4fcb298 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -54,6 +54,7 @@
#ifdef CONFIG_PPC64
#include <asm/firmware.h>
#endif
+#include <asm/code-patching.h>
#include <linux/kprobes.h>
#include <linux/kdebug.h>
@@ -1086,7 +1087,9 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
struct thread_info *ti = (void *)task_stack_page(p);
memset(childregs, 0, sizeof(struct pt_regs));
childregs->gpr[1] = sp + sizeof(struct pt_regs);
- childregs->gpr[14] = usp; /* function */
+ /* function */
+ if (usp)
+ childregs->gpr[14] = ppc_function_entry((void *)usp);
#ifdef CONFIG_PPC64
clear_tsk_thread_flag(p, TIF_32BIT);
childregs->softe = 1;
@@ -1165,17 +1168,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
if (cpu_has_feature(CPU_FTR_HAS_PPR))
p->thread.ppr = INIT_PPR;
#endif
- /*
- * The PPC64 ABI makes use of a TOC to contain function
- * pointers. The function (ret_from_except) is actually a pointer
- * to the TOC entry. The first entry is a pointer to the actual
- * function.
- */
-#ifdef CONFIG_PPC64
- kregs->nip = *((unsigned long *)f);
-#else
- kregs->nip = (unsigned long)f;
-#endif
+ kregs->nip = ppc_function_entry(f);
return 0;
}
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 15/33] powerpc: Fix ABIv2 issues with stack offsets in assembly code
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (13 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 14/33] powerpc: Fix kernel thread creation on ABIv2 Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-26 10:04 ` Alan Modra
2014-04-01 13:54 ` Philippe Bergheaud
2014-03-25 11:44 ` [PATCH 16/33] powerpc: Fix unsafe accesses to parameter area in ELFv2 Anton Blanchard
` (18 subsequent siblings)
33 siblings, 2 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
Fix STK_PARAM and use it instead of hardcoding ABIv1 offsets.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/include/asm/ppc_asm.h | 4 ++++
arch/powerpc/lib/copypage_power7.S | 8 ++++----
arch/powerpc/lib/copyuser_power7.S | 24 ++++++++++++------------
arch/powerpc/lib/memcpy_64.S | 8 ++++----
arch/powerpc/lib/memcpy_power7.S | 20 ++++++++++----------
5 files changed, 34 insertions(+), 30 deletions(-)
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 5394d41..3185d11 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -189,7 +189,11 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
#define __STK_REG(i) (112 + ((i)-14)*8)
#define STK_REG(i) __STK_REG(__REG_##i)
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+#define __STK_PARAM(i) (32 + ((i)-3)*8)
+#else
#define __STK_PARAM(i) (48 + ((i)-3)*8)
+#endif
#define STK_PARAM(i) __STK_PARAM(__REG_##i)
#if defined(_CALL_ELF) && _CALL_ELF == 2
diff --git a/arch/powerpc/lib/copypage_power7.S b/arch/powerpc/lib/copypage_power7.S
index 0f1e239..affc6d3 100644
--- a/arch/powerpc/lib/copypage_power7.S
+++ b/arch/powerpc/lib/copypage_power7.S
@@ -56,15 +56,15 @@ _GLOBAL(copypage_power7)
#ifdef CONFIG_ALTIVEC
mflr r0
- std r3,48(r1)
- std r4,56(r1)
+ std r3,STK_PARAM(R3)(r1)
+ std r4,STK_PARAM(R4)(r1)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
bl enter_vmx_copy
cmpwi r3,0
ld r0,STACKFRAMESIZE+16(r1)
- ld r3,STACKFRAMESIZE+48(r1)
- ld r4,STACKFRAMESIZE+56(r1)
+ ld r3,STACKFRAMESIZE+STK_PARAM(R3)(r1)
+ ld r4,STACKFRAMESIZE+STK_PARAM(R4)(r1)
mtlr r0
li r0,(PAGE_SIZE/128)
diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
index 62f0540..db0fcbc 100644
--- a/arch/powerpc/lib/copyuser_power7.S
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -85,9 +85,9 @@
.Lexit:
addi r1,r1,STACKFRAMESIZE
.Ldo_err1:
- ld r3,48(r1)
- ld r4,56(r1)
- ld r5,64(r1)
+ ld r3,STK_PARAM(R3)(r1)
+ ld r4,STK_PARAM(R4)(r1)
+ ld r5,STK_PARAM(R5)(r1)
b __copy_tofrom_user_base
@@ -96,18 +96,18 @@ _GLOBAL(__copy_tofrom_user_power7)
cmpldi r5,16
cmpldi cr1,r5,4096
- std r3,48(r1)
- std r4,56(r1)
- std r5,64(r1)
+ std r3,STK_PARAM(R3)(r1)
+ std r4,STK_PARAM(R4)(r1)
+ std r5,STK_PARAM(R5)(r1)
blt .Lshort_copy
bgt cr1,.Lvmx_copy
#else
cmpldi r5,16
- std r3,48(r1)
- std r4,56(r1)
- std r5,64(r1)
+ std r3,STK_PARAM(R3)(r1)
+ std r4,STK_PARAM(R4)(r1)
+ std r5,STK_PARAM(R5)(r1)
blt .Lshort_copy
#endif
@@ -298,9 +298,9 @@ err1; stb r0,0(r3)
bl enter_vmx_usercopy
cmpwi cr1,r3,0
ld r0,STACKFRAMESIZE+16(r1)
- ld r3,STACKFRAMESIZE+48(r1)
- ld r4,STACKFRAMESIZE+56(r1)
- ld r5,STACKFRAMESIZE+64(r1)
+ ld r3,STACKFRAMESIZE+STK_PARAM(R3)(r1)
+ ld r4,STACKFRAMESIZE+STK_PARAM(R4)(r1)
+ ld r5,STACKFRAMESIZE+STK_PARAM(R5)(r1)
mtlr r0
/*
diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S
index 72ad055..01da956 100644
--- a/arch/powerpc/lib/memcpy_64.S
+++ b/arch/powerpc/lib/memcpy_64.S
@@ -12,7 +12,7 @@
.align 7
_GLOBAL(memcpy)
BEGIN_FTR_SECTION
- std r3,48(r1) /* save destination pointer for return value */
+ std r3,STK_PARAM(R3)(r1) /* save destination pointer for return value */
FTR_SECTION_ELSE
#ifndef SELFTEST
b memcpy_power7
@@ -73,7 +73,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
2: bf cr7*4+3,3f
lbz r9,8(r4)
stb r9,0(r3)
-3: ld r3,48(r1) /* return dest pointer */
+3: ld r3,STK_PARAM(R3)(r1) /* return dest pointer */
blr
.Lsrc_unaligned:
@@ -156,7 +156,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
2: bf cr7*4+3,3f
rotldi r9,r9,8
stb r9,0(r3)
-3: ld r3,48(r1) /* return dest pointer */
+3: ld r3,STK_PARAM(R3)(r1) /* return dest pointer */
blr
.Ldst_unaligned:
@@ -201,5 +201,5 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
3: bf cr7*4+3,4f
lbz r0,0(r4)
stb r0,0(r3)
-4: ld r3,48(r1) /* return dest pointer */
+4: ld r3,STK_PARAM(R3)(r1) /* return dest pointer */
blr
diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S
index bae3f21..87d8eec 100644
--- a/arch/powerpc/lib/memcpy_power7.S
+++ b/arch/powerpc/lib/memcpy_power7.S
@@ -33,14 +33,14 @@ _GLOBAL(memcpy_power7)
cmpldi r5,16
cmpldi cr1,r5,4096
- std r3,48(r1)
+ std r3,STK_PARAM(R1)(r1)
blt .Lshort_copy
bgt cr1,.Lvmx_copy
#else
cmpldi r5,16
- std r3,48(r1)
+ std r3,STK_PARAM(R1)(r1)
blt .Lshort_copy
#endif
@@ -216,7 +216,7 @@ _GLOBAL(memcpy_power7)
lbz r0,0(r4)
stb r0,0(r3)
-15: ld r3,48(r1)
+15: ld r3,STK_PARAM(R3)(r1)
blr
.Lunwind_stack_nonvmx_copy:
@@ -226,16 +226,16 @@ _GLOBAL(memcpy_power7)
#ifdef CONFIG_ALTIVEC
.Lvmx_copy:
mflr r0
- std r4,56(r1)
- std r5,64(r1)
+ std r4,STK_PARAM(R4)(r1)
+ std r5,STK_PARAM(R5)(r1)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
bl enter_vmx_copy
cmpwi cr1,r3,0
ld r0,STACKFRAMESIZE+16(r1)
- ld r3,STACKFRAMESIZE+48(r1)
- ld r4,STACKFRAMESIZE+56(r1)
- ld r5,STACKFRAMESIZE+64(r1)
+ ld r3,STACKFRAMESIZE+STK_PARAM(R3)(r1)
+ ld r4,STACKFRAMESIZE+STK_PARAM(R4)(r1)
+ ld r5,STACKFRAMESIZE+STK_PARAM(R5)(r1)
mtlr r0
/*
@@ -447,7 +447,7 @@ _GLOBAL(memcpy_power7)
stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
- ld r3,48(r1)
+ ld r3,STK_PARAM(R3)(r1)
b exit_vmx_copy /* tail call optimise */
.Lvmx_unaligned_copy:
@@ -651,6 +651,6 @@ _GLOBAL(memcpy_power7)
stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
- ld r3,48(r1)
+ ld r3,STK_PARAM(R3)(r1)
b exit_vmx_copy /* tail call optimise */
#endif /* CONFiG_ALTIVEC */
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 16/33] powerpc: Fix unsafe accesses to parameter area in ELFv2
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (14 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 15/33] powerpc: Fix ABIv2 issues with stack offsets in assembly code Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 17/33] powerpc/tm: Use STK_PARAM Anton Blanchard
` (17 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
From: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Some of the assembler files in lib/ make use of the fact that in the
ELFv1 ABI, the caller guarantees to provide stack space to save the
parameter registers r3 ... r10. This guarantee is no longer present
in ELFv2 for functions that have no variable argument list and no
more than 8 arguments.
Change the affected routines to temporarily store registers in the
red zone and/or the top of their own stack frame (in the space
provided to save r31 .. r29, which is actually not used in these
routines).
In opal_query_takeover, simply always allocate a stack frame;
the routine is not performance critical.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/lib/copypage_power7.S | 8 ++++----
arch/powerpc/lib/copyuser_power7.S | 24 ++++++++++++------------
arch/powerpc/lib/memcpy_64.S | 8 ++++----
arch/powerpc/lib/memcpy_power7.S | 20 ++++++++++----------
arch/powerpc/platforms/powernv/opal-takeover.S | 2 ++
5 files changed, 32 insertions(+), 30 deletions(-)
diff --git a/arch/powerpc/lib/copypage_power7.S b/arch/powerpc/lib/copypage_power7.S
index affc6d3..d7dafb3 100644
--- a/arch/powerpc/lib/copypage_power7.S
+++ b/arch/powerpc/lib/copypage_power7.S
@@ -56,15 +56,15 @@ _GLOBAL(copypage_power7)
#ifdef CONFIG_ALTIVEC
mflr r0
- std r3,STK_PARAM(R3)(r1)
- std r4,STK_PARAM(R4)(r1)
+ std r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+ std r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
bl enter_vmx_copy
cmpwi r3,0
ld r0,STACKFRAMESIZE+16(r1)
- ld r3,STACKFRAMESIZE+STK_PARAM(R3)(r1)
- ld r4,STACKFRAMESIZE+STK_PARAM(R4)(r1)
+ ld r3,STK_REG(R31)(r1)
+ ld r4,STK_REG(R30)(r1)
mtlr r0
li r0,(PAGE_SIZE/128)
diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
index db0fcbc..c46c876 100644
--- a/arch/powerpc/lib/copyuser_power7.S
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -85,9 +85,9 @@
.Lexit:
addi r1,r1,STACKFRAMESIZE
.Ldo_err1:
- ld r3,STK_PARAM(R3)(r1)
- ld r4,STK_PARAM(R4)(r1)
- ld r5,STK_PARAM(R5)(r1)
+ ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+ ld r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
+ ld r5,-STACKFRAMESIZE+STK_REG(R29)(r1)
b __copy_tofrom_user_base
@@ -96,18 +96,18 @@ _GLOBAL(__copy_tofrom_user_power7)
cmpldi r5,16
cmpldi cr1,r5,4096
- std r3,STK_PARAM(R3)(r1)
- std r4,STK_PARAM(R4)(r1)
- std r5,STK_PARAM(R5)(r1)
+ std r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+ std r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
+ std r5,-STACKFRAMESIZE+STK_REG(R29)(r1)
blt .Lshort_copy
bgt cr1,.Lvmx_copy
#else
cmpldi r5,16
- std r3,STK_PARAM(R3)(r1)
- std r4,STK_PARAM(R4)(r1)
- std r5,STK_PARAM(R5)(r1)
+ std r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
+ std r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
+ std r5,-STACKFRAMESIZE+STK_REG(R29)(r1)
blt .Lshort_copy
#endif
@@ -298,9 +298,9 @@ err1; stb r0,0(r3)
bl enter_vmx_usercopy
cmpwi cr1,r3,0
ld r0,STACKFRAMESIZE+16(r1)
- ld r3,STACKFRAMESIZE+STK_PARAM(R3)(r1)
- ld r4,STACKFRAMESIZE+STK_PARAM(R4)(r1)
- ld r5,STACKFRAMESIZE+STK_PARAM(R5)(r1)
+ ld r3,STK_REG(R31)(r1)
+ ld r4,STK_REG(R30)(r1)
+ ld r5,STK_REG(R29)(r1)
mtlr r0
/*
diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S
index 01da956..9d3960c 100644
--- a/arch/powerpc/lib/memcpy_64.S
+++ b/arch/powerpc/lib/memcpy_64.S
@@ -12,7 +12,7 @@
.align 7
_GLOBAL(memcpy)
BEGIN_FTR_SECTION
- std r3,STK_PARAM(R3)(r1) /* save destination pointer for return value */
+ std r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* save destination pointer for return value */
FTR_SECTION_ELSE
#ifndef SELFTEST
b memcpy_power7
@@ -73,7 +73,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
2: bf cr7*4+3,3f
lbz r9,8(r4)
stb r9,0(r3)
-3: ld r3,STK_PARAM(R3)(r1) /* return dest pointer */
+3: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* return dest pointer */
blr
.Lsrc_unaligned:
@@ -156,7 +156,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
2: bf cr7*4+3,3f
rotldi r9,r9,8
stb r9,0(r3)
-3: ld r3,STK_PARAM(R3)(r1) /* return dest pointer */
+3: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* return dest pointer */
blr
.Ldst_unaligned:
@@ -201,5 +201,5 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
3: bf cr7*4+3,4f
lbz r0,0(r4)
stb r0,0(r3)
-4: ld r3,STK_PARAM(R3)(r1) /* return dest pointer */
+4: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* return dest pointer */
blr
diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S
index 87d8eec..2ff5c14 100644
--- a/arch/powerpc/lib/memcpy_power7.S
+++ b/arch/powerpc/lib/memcpy_power7.S
@@ -33,14 +33,14 @@ _GLOBAL(memcpy_power7)
cmpldi r5,16
cmpldi cr1,r5,4096
- std r3,STK_PARAM(R1)(r1)
+ std r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
blt .Lshort_copy
bgt cr1,.Lvmx_copy
#else
cmpldi r5,16
- std r3,STK_PARAM(R1)(r1)
+ std r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
blt .Lshort_copy
#endif
@@ -216,7 +216,7 @@ _GLOBAL(memcpy_power7)
lbz r0,0(r4)
stb r0,0(r3)
-15: ld r3,STK_PARAM(R3)(r1)
+15: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
blr
.Lunwind_stack_nonvmx_copy:
@@ -226,16 +226,16 @@ _GLOBAL(memcpy_power7)
#ifdef CONFIG_ALTIVEC
.Lvmx_copy:
mflr r0
- std r4,STK_PARAM(R4)(r1)
- std r5,STK_PARAM(R5)(r1)
+ std r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
+ std r5,-STACKFRAMESIZE+STK_REG(R29)(r1)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
bl enter_vmx_copy
cmpwi cr1,r3,0
ld r0,STACKFRAMESIZE+16(r1)
- ld r3,STACKFRAMESIZE+STK_PARAM(R3)(r1)
- ld r4,STACKFRAMESIZE+STK_PARAM(R4)(r1)
- ld r5,STACKFRAMESIZE+STK_PARAM(R5)(r1)
+ ld r3,STK_REG(R31)(r1)
+ ld r4,STK_REG(R30)(r1)
+ ld r5,STK_REG(R29)(r1)
mtlr r0
/*
@@ -447,7 +447,7 @@ _GLOBAL(memcpy_power7)
stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
- ld r3,STK_PARAM(R3)(r1)
+ ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
b exit_vmx_copy /* tail call optimise */
.Lvmx_unaligned_copy:
@@ -651,6 +651,6 @@ _GLOBAL(memcpy_power7)
stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
- ld r3,STK_PARAM(R3)(r1)
+ ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
b exit_vmx_copy /* tail call optimise */
#endif /* CONFiG_ALTIVEC */
diff --git a/arch/powerpc/platforms/powernv/opal-takeover.S b/arch/powerpc/platforms/powernv/opal-takeover.S
index 3cd2628..11a3169 100644
--- a/arch/powerpc/platforms/powernv/opal-takeover.S
+++ b/arch/powerpc/platforms/powernv/opal-takeover.S
@@ -21,11 +21,13 @@
_GLOBAL(opal_query_takeover)
mfcr r0
stw r0,8(r1)
+ stdu r1,-STACKFRAMESIZE(r1)
std r3,STK_PARAM(R3)(r1)
std r4,STK_PARAM(R4)(r1)
li r3,H_HAL_TAKEOVER
li r4,H_HAL_TAKEOVER_QUERY_MAGIC
HVSC
+ addi r1,r1,STACKFRAMESIZE
ld r10,STK_PARAM(R3)(r1)
std r4,0(r10)
ld r10,STK_PARAM(R4)(r1)
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 17/33] powerpc/tm: Use STK_PARAM
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (15 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 16/33] powerpc: Fix unsafe accesses to parameter area in ELFv2 Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 18/33] powerpc/tm: Fix GOT save offset for ABIv2 Anton Blanchard
` (16 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
Get rid of the tm specific STACK_PARAM and use STK_PARAM
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/kernel/tm.S | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index ef47bcb..db02e84 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -41,7 +41,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX); \
/* Stack frame offsets for local variables. */
#define TM_FRAME_L0 TM_FRAME_SIZE-16
#define TM_FRAME_L1 TM_FRAME_SIZE-8
-#define STACK_PARAM(x) (48+((x)*8))
/* In order to access the TM SPRs, TM must be enabled. So, do so: */
@@ -113,7 +112,7 @@ _GLOBAL(tm_reclaim)
/* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD]. */
- std r3, STACK_PARAM(0)(r1)
+ std r3, STK_PARAM(R3)(r1)
SAVE_NVGPRS(r1)
/* We need to setup MSR for VSX register save instructions. Here we
@@ -202,7 +201,7 @@ dont_backup_fp:
/* Now get some more GPRS free */
std r7, GPR7(r1) /* Temporary stash */
std r12, GPR12(r1) /* '' '' '' */
- ld r12, STACK_PARAM(0)(r1) /* Param 0, thread_struct * */
+ ld r12, STK_PARAM(R3)(r1) /* Param 0, thread_struct * */
std r11, THREAD_TM_PPR(r12) /* Store PPR and free r11 */
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 18/33] powerpc/tm: Fix GOT save offset for ABIv2
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (16 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 17/33] powerpc/tm: Use STK_PARAM Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 19/33] powerpc/tracing: TRACE_WITH_FRAME_BUFFER creates invalid stack frames Anton Blanchard
` (15 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
The r2 TOC/GOT save offset is 40 on ABIv1 and 24 on ABIv2.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/include/asm/ppc_asm.h | 2 ++
arch/powerpc/kernel/tm.S | 8 ++++----
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 3185d11..2cc2511 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -190,8 +190,10 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
#define STK_REG(i) __STK_REG(__REG_##i)
#if defined(_CALL_ELF) && _CALL_ELF == 2
+#define STK_GOT 24
#define __STK_PARAM(i) (32 + ((i)-3)*8)
#else
+#define STK_GOT 40
#define __STK_PARAM(i) (48 + ((i)-3)*8)
#endif
#define STK_PARAM(i) __STK_PARAM(__REG_##i)
diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index db02e84..988565b 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -107,7 +107,7 @@ _GLOBAL(tm_reclaim)
mflr r0
stw r6, 8(r1)
std r0, 16(r1)
- std r2, 40(r1)
+ std r2, STK_GOT(r1)
stdu r1, -TM_FRAME_SIZE(r1)
/* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD]. */
@@ -288,7 +288,7 @@ dont_backup_fp:
ld r0, 16(r1)
mtcr r4
mtlr r0
- ld r2, 40(r1)
+ ld r2, STK_GOT(r1)
/* Load system default DSCR */
ld r4, DSCR_DEFAULT@toc(r2)
@@ -311,7 +311,7 @@ _GLOBAL(tm_recheckpoint)
mflr r0
stw r5, 8(r1)
std r0, 16(r1)
- std r2, 40(r1)
+ std r2, STK_GOT(r1)
stdu r1, -TM_FRAME_SIZE(r1)
/* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD].
@@ -447,7 +447,7 @@ restore_gprs:
ld r0, 16(r1)
mtcr r4
mtlr r0
- ld r2, 40(r1)
+ ld r2, STK_GOT(r1)
/* Load system default DSCR */
ld r4, DSCR_DEFAULT@toc(r2)
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 19/33] powerpc/tracing: TRACE_WITH_FRAME_BUFFER creates invalid stack frames
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (17 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 18/33] powerpc/tm: Fix GOT save offset for ABIv2 Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 20/33] powerpc: Fix SMP issues with ppc64le ABIv2 Anton Blanchard
` (14 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
TRACE_WITH_FRAME_BUFFER creates 32 byte stack frames. On ppc64
ABIv1 this is too small and a callee could corrupt the stack by
writing to the parameter save area (starting at offset 48).
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/include/asm/irqflags.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h
index f62c056..e20eb95 100644
--- a/arch/powerpc/include/asm/irqflags.h
+++ b/arch/powerpc/include/asm/irqflags.h
@@ -20,9 +20,9 @@
*/
#define TRACE_WITH_FRAME_BUFFER(func) \
mflr r0; \
- stdu r1, -32(r1); \
+ stdu r1, -STACK_FRAME_OVERHEAD(r1); \
std r0, 16(r1); \
- stdu r1, -32(r1); \
+ stdu r1, -STACK_FRAME_OVERHEAD(r1); \
bl func; \
ld r1, 0(r1); \
ld r1, 0(r1);
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 20/33] powerpc: Fix SMP issues with ppc64le ABIv2
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (18 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 19/33] powerpc/tracing: TRACE_WITH_FRAME_BUFFER creates invalid stack frames Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 21/33] powerpc: Fix ABIv2 issue with dereference_function_descriptor Anton Blanchard
` (13 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
There is no need to put a function descriptor in
__secondary_hold_spinloop. Use ppc_function_entry to get the
instruction address and put it in __secondary_hold_spinloop instead.
Also fix an issue where we assumed cur_cpu_spec held a function
descriptor.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/kernel/head_64.S | 18 ++++++++----------
arch/powerpc/kernel/setup_64.c | 2 +-
arch/powerpc/platforms/85xx/smp.c | 3 ++-
arch/powerpc/platforms/cell/smp.c | 5 +++--
arch/powerpc/platforms/powernv/smp.c | 5 +++--
arch/powerpc/platforms/pseries/smp.c | 5 +++--
arch/powerpc/platforms/wsp/scom_smp.c | 3 ++-
7 files changed, 22 insertions(+), 19 deletions(-)
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 97329a1..a95145d 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -76,10 +76,9 @@ END_FTR_SECTION(0, 1)
/* Catch branch to 0 in real mode */
trap
- /* Secondary processors spin on this value until it becomes nonzero.
- * When it does it contains the real address of the descriptor
- * of the function that the cpu should jump to to continue
- * initialization.
+ /* Secondary processors spin on this value until it becomes non-zero.
+ * When non-zero, it contains the real address of the function the cpu
+ * should jump to.
*/
.balign 8
.globl __secondary_hold_spinloop
@@ -148,9 +147,6 @@ __secondary_hold:
#ifdef CONFIG_PPC_BOOK3E
tovirt(r12,r12)
#endif
-#if !defined(_CALL_ELF) || _CALL_ELF != 2
- ld r12,0(r12) /* deref function descriptor */
-#endif
mtctr r12
mr r3,r24
/*
@@ -266,10 +262,12 @@ generic_secondary_common_init:
/* See if we need to call a cpu state restore handler */
LOAD_REG_ADDR(r23, cur_cpu_spec)
ld r23,0(r23)
- ld r23,CPU_SPEC_RESTORE(r23)
- cmpdi 0,r23,0
+ ld r12,CPU_SPEC_RESTORE(r23)
+ cmpdi 0,r12,0
beq 3f
- ld r12,0(r23)
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+ ld r12,0(r12)
+#endif
mtctr r12
bctrl
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 4933909..b694504 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -314,7 +314,7 @@ void smp_release_cpus(void)
ptr = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
- PHYSICAL_START);
- *ptr = __pa(generic_secondary_smp_init);
+ *ptr = ppc_function_entry(generic_secondary_smp_init);
/* And wait a bit for them to catch up */
for (i = 0; i < 100000; i++) {
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 6382098..ba093f5 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -27,6 +27,7 @@
#include <asm/cacheflush.h>
#include <asm/dbell.h>
#include <asm/fsl_guts.h>
+#include <asm/code-patching.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/mpic.h>
@@ -267,7 +268,7 @@ out:
flush_spin_table(spin_table);
out_be32(&spin_table->pir, hw_cpu);
out_be64((u64 *)(&spin_table->addr_h),
- __pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
+ __pa(ppc_function_entry(generic_secondary_smp_init)));
flush_spin_table(spin_table);
#endif
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 90745ea..c8017a7 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -40,6 +40,7 @@
#include <asm/firmware.h>
#include <asm/rtas.h>
#include <asm/cputhreads.h>
+#include <asm/code-patching.h>
#include "interrupt.h"
#include <asm/udbg.h>
@@ -70,8 +71,8 @@ static cpumask_t of_spin_map;
static inline int smp_startup_cpu(unsigned int lcpu)
{
int status;
- unsigned long start_here = __pa((u32)*((unsigned long *)
- generic_secondary_smp_init));
+ unsigned long start_here =
+ __pa(ppc_function_entry(generic_secondary_smp_init));
unsigned int pcpu;
int start_cpu;
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index 908672b..b370b86 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -30,6 +30,7 @@
#include <asm/cputhreads.h>
#include <asm/xics.h>
#include <asm/opal.h>
+#include <asm/code-patching.h>
#include "powernv.h"
@@ -49,8 +50,8 @@ static void pnv_smp_setup_cpu(int cpu)
int pnv_smp_kick_cpu(int nr)
{
unsigned int pcpu = get_hard_smp_processor_id(nr);
- unsigned long start_here = __pa(*((unsigned long *)
- generic_secondary_smp_init));
+ unsigned long start_here =
+ __pa(ppc_function_entry(generic_secondary_smp_init));
long rc;
BUG_ON(nr < 0 || nr >= NR_CPUS);
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 24f58cb..a3555b1 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -44,6 +44,7 @@
#include <asm/xics.h>
#include <asm/dbell.h>
#include <asm/plpar_wrappers.h>
+#include <asm/code-patching.h>
#include "pseries.h"
#include "offline_states.h"
@@ -96,8 +97,8 @@ int smp_query_cpu_stopped(unsigned int pcpu)
static inline int smp_startup_cpu(unsigned int lcpu)
{
int status;
- unsigned long start_here = __pa((u32)*((unsigned long *)
- generic_secondary_smp_init));
+ unsigned long start_here =
+ __pa(ppc_function_entry(generic_secondary_smp_init));
unsigned int pcpu;
int start_cpu;
diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c
index 268bc89..8c79ce0 100644
--- a/arch/powerpc/platforms/wsp/scom_smp.c
+++ b/arch/powerpc/platforms/wsp/scom_smp.c
@@ -20,6 +20,7 @@
#include <asm/reg_a2.h>
#include <asm/scom.h>
#include <asm/udbg.h>
+#include <asm/code-patching.h>
#include "wsp.h"
@@ -405,7 +406,7 @@ int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx, struct device_node *np)
goto fail;
}
- start_here = *(unsigned long *)(core_setup ? generic_secondary_smp_init
+ start_here = ppc_function_entry(core_setup ? generic_secondary_smp_init
: generic_secondary_thread_init);
pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here);
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 21/33] powerpc: Fix ABIv2 issue with dereference_function_descriptor
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (19 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 20/33] powerpc: Fix SMP issues with ppc64le ABIv2 Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 22/33] powerpc: make module stub code endian independent Anton Blanchard
` (12 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
Don't try and dereference a function descriptor on ABIv2.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/include/asm/sections.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index d0e784e..d1bb96d 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -39,6 +39,7 @@ static inline int overlaps_kernel_text(unsigned long start, unsigned long end)
(unsigned long)_stext < end;
}
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
#undef dereference_function_descriptor
static inline void *dereference_function_descriptor(void *ptr)
{
@@ -49,6 +50,7 @@ static inline void *dereference_function_descriptor(void *ptr)
ptr = p;
return ptr;
}
+#endif
#endif
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 22/33] powerpc: make module stub code endian independent
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (20 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 21/33] powerpc: Fix ABIv2 issue with dereference_function_descriptor Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 23/33] powerpc: modules implement R_PPC64_TOCSAVE relocation Anton Blanchard
` (11 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
From: Rusty Russell <rusty@rustcorp.com.au>
By representing them as words, rather than chars, we can avoid
endian ifdefs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
arch/powerpc/kernel/module_64.c | 42 +++++++++++------------------------------
1 file changed, 11 insertions(+), 31 deletions(-)
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 12664c1..7c16b2e 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -47,8 +47,8 @@
struct ppc64_stub_entry
{
/* 28 byte jump instruction sequence (7 instructions) */
- unsigned char jump[28];
- unsigned char unused[4];
+ u32 jump[7];
+ u32 unused;
/* Data for the above code */
struct ppc64_opd_entry opd;
};
@@ -61,25 +61,14 @@ struct ppc64_stub_entry
r2) into the stub. */
static struct ppc64_stub_entry ppc64_stub =
{ .jump = {
-#ifdef __LITTLE_ENDIAN__
- 0x00, 0x00, 0x82, 0x3d, /* addis r12,r2, <high> */
- 0x00, 0x00, 0x8c, 0x39, /* addi r12,r12, <low> */
+ 0x3d820000, /* addis r12,r2, <high> */
+ 0x398c0000, /* addi r12,r12, <low> */
/* Save current r2 value in magic place on the stack. */
- 0x28, 0x00, 0x41, 0xf8, /* std r2,40(r1) */
- 0x20, 0x00, 0x6c, 0xe9, /* ld r11,32(r12) */
- 0x28, 0x00, 0x4c, 0xe8, /* ld r2,40(r12) */
- 0xa6, 0x03, 0x69, 0x7d, /* mtctr r11 */
- 0x20, 0x04, 0x80, 0x4e /* bctr */
-#else
- 0x3d, 0x82, 0x00, 0x00, /* addis r12,r2, <high> */
- 0x39, 0x8c, 0x00, 0x00, /* addi r12,r12, <low> */
- /* Save current r2 value in magic place on the stack. */
- 0xf8, 0x41, 0x00, 0x28, /* std r2,40(r1) */
- 0xe9, 0x6c, 0x00, 0x20, /* ld r11,32(r12) */
- 0xe8, 0x4c, 0x00, 0x28, /* ld r2,40(r12) */
- 0x7d, 0x69, 0x03, 0xa6, /* mtctr r11 */
- 0x4e, 0x80, 0x04, 0x20 /* bctr */
-#endif
+ 0xf8410028, /* std r2,40(r1) */
+ 0xe96c0020, /* ld r11,32(r12) */
+ 0xe84c0028, /* ld r2,40(r12) */
+ 0x7d6903a6, /* mtctr r11 */
+ 0x4e800420 /* bctr */
} };
/* Count how many different 24-bit relocations (different symbol,
@@ -274,19 +263,10 @@ static inline int create_stub(Elf64_Shdr *sechdrs,
struct ppc64_opd_entry *opd,
struct module *me)
{
- Elf64_Half *loc1, *loc2;
long reladdr;
*entry = ppc64_stub;
-#ifdef __LITTLE_ENDIAN__
- loc1 = (Elf64_Half *)&entry->jump[0];
- loc2 = (Elf64_Half *)&entry->jump[4];
-#else
- loc1 = (Elf64_Half *)&entry->jump[2];
- loc2 = (Elf64_Half *)&entry->jump[6];
-#endif
-
/* Stub uses address relative to r2. */
reladdr = (unsigned long)entry - my_r2(sechdrs, me);
if (reladdr > 0x7FFFFFFF || reladdr < -(0x80000000L)) {
@@ -296,8 +276,8 @@ static inline int create_stub(Elf64_Shdr *sechdrs,
}
DEBUGP("Stub %p get data from reladdr %li\n", entry, reladdr);
- *loc1 = PPC_HA(reladdr);
- *loc2 = PPC_LO(reladdr);
+ entry->jump[0] |= PPC_HA(reladdr);
+ entry->jump[1] |= PPC_LO(reladdr);
entry->opd.funcaddr = opd->funcaddr;
entry->opd.r2 = opd->r2;
return 1;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 23/33] powerpc: modules implement R_PPC64_TOCSAVE relocation.
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (21 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 22/33] powerpc: make module stub code endian independent Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 24/33] powerpc: EXPORT_SYMBOL(.TOC.) Anton Blanchard
` (10 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
From: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
arch/powerpc/include/uapi/asm/elf.h | 5 ++++-
arch/powerpc/kernel/module_64.c | 8 ++++++++
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/uapi/asm/elf.h b/arch/powerpc/include/uapi/asm/elf.h
index 7e39c91..0341109 100644
--- a/arch/powerpc/include/uapi/asm/elf.h
+++ b/arch/powerpc/include/uapi/asm/elf.h
@@ -291,9 +291,12 @@ do { \
#define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */
#define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */
#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */
+#define R_PPC64_TLSGD 107
+#define R_PPC64_TLSLD 108
+#define R_PPC64_TOCSAVE 109
/* Keep this the last entry. */
-#define R_PPC64_NUM 107
+#define R_PPC64_NUM 110
/* There's actually a third entry here, but it's unused */
struct ppc64_opd_entry
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 7c16b2e..a8694d4 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -454,6 +454,14 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
*location = value - (unsigned long)location;
break;
+ case R_PPC64_TOCSAVE:
+ /*
+ * Marker reloc indicates we don't have to save r2.
+ * That would only save us one instruction, so ignore
+ * it.
+ */
+ break;
+
default:
printk("%s: Unknown ADD relocation: %lu\n",
me->name,
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 24/33] powerpc: EXPORT_SYMBOL(.TOC.)
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (22 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 23/33] powerpc: modules implement R_PPC64_TOCSAVE relocation Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 25/33] powerpc: module: handle MODVERSION for .TOC Anton Blanchard
` (9 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
From: Rusty Russell <rusty@rustcorp.com.au>
For the ELFv2 ABI, powerpc introduces a magic symbol ".TOC.". depmod
then complains that this doesn't resolve (so does modpost, but we could
easily fix that). To export this, we need to use asm.
modpost and depmod both strip "." from symbols for the old PPC64 ELFv1
ABI, so we actually export a "TOC.".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
arch/powerpc/kernel/misc_64.S | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index bda85a1..b80fafb 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -634,3 +634,22 @@ _GLOBAL(kexec_sequence)
li r5,0
blr /* image->start(physid, image->start, 0); */
#endif /* CONFIG_KEXEC */
+
+#ifdef CONFIG_MODULES
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+/*
+ * Export a fake .TOC. since both modpost and depmod will complain otherwise.
+ * Both modpost and depmod strip the leading . so we do the same here.
+ */
+.section "__ksymtab_strings","a"
+__kstrtab_TOC.:
+ .asciz "TOC."
+
+.section "___ksymtab+TOC.","a"
+/* This symbol name is important: it's used by modpost to find exported syms */
+.globl __ksymtab_TOC.
+__ksymtab_TOC.:
+ .llong 0 /* .value */
+ .llong __kstrtab_TOC.
+#endif /* ELFv2 */
+#endif /* MODULES */
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 25/33] powerpc: module: handle MODVERSION for .TOC.
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (23 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 24/33] powerpc: EXPORT_SYMBOL(.TOC.) Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 26/33] powerpc: Fix up TOC. for modules Anton Blanchard
` (8 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
From: Rusty Russell <rusty@rustcorp.com.au>
For the ELFv2 ABI, powerpc introduces a magic symbol ".TOC.". If we
don't create a CRC for it (minus the leading ".", since we strip that)
we get a modpost warning about missing CRC and the CRC array seems to
be displaced by 1 so other CRCs mismatch too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
arch/powerpc/kernel/misc_64.S | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index b80fafb..4e314b9 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -637,6 +637,15 @@ _GLOBAL(kexec_sequence)
#ifdef CONFIG_MODULES
#if defined(_CALL_ELF) && _CALL_ELF == 2
+
+#ifdef CONFIG_MODVERSIONS
+.weak __crc_TOC.
+.section "___kcrctab+TOC.","a"
+.globl __kcrctab_TOC.
+__kcrctab_TOC.:
+ .llong __crc_TOC.
+#endif
+
/*
* Export a fake .TOC. since both modpost and depmod will complain otherwise.
* Both modpost and depmod strip the leading . so we do the same here.
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 26/33] powerpc: Fix up TOC. for modules.
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (24 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 25/33] powerpc: module: handle MODVERSION for .TOC Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 27/33] powerpc: Handle new ELFv2 module relocations Anton Blanchard
` (7 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
From: Rusty Russell <rusty@rustcorp.com.au>
The kernel resolved the '.TOC.' to a fake symbol, so we need to fix it up
to point to our .toc section plus 0x8000.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
arch/powerpc/include/asm/module.h | 1 +
arch/powerpc/kernel/module_64.c | 29 +++++++++++++++++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
index 49fa55b..c9c7aaa 100644
--- a/arch/powerpc/include/asm/module.h
+++ b/arch/powerpc/include/asm/module.h
@@ -35,6 +35,7 @@ struct mod_arch_specific {
#ifdef __powerpc64__
unsigned int stubs_section; /* Index of stubs section in module */
unsigned int toc_section; /* What section is the TOC? */
+ bool toc_fixed; /* Have we fixed up .TOC.? */
#ifdef CONFIG_DYNAMIC_FTRACE
unsigned long toc;
unsigned long tramp;
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index a8694d4..f6544d7 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -196,6 +196,24 @@ static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
}
}
+static Elf64_Sym *find_dot_toc(Elf64_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex)
+{
+ unsigned int i, numsyms;
+ Elf64_Sym *syms;
+
+ syms = (Elf64_Sym *)sechdrs[symindex].sh_addr;
+ numsyms = sechdrs[symindex].sh_size / sizeof(Elf64_Sym);
+
+ for (i = 1; i < numsyms; i++) {
+ if (syms[i].st_shndx == SHN_UNDEF
+ && strcmp(strtab + syms[i].st_name, ".TOC.") == 0)
+ return &syms[i];
+ }
+ return NULL;
+}
+
int module_frob_arch_sections(Elf64_Ehdr *hdr,
Elf64_Shdr *sechdrs,
char *secstrings,
@@ -337,6 +355,17 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
DEBUGP("Applying ADD relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
+
+ /* First time we're called, we can fix up .TOC. */
+ if (!me->arch.toc_fixed) {
+ sym = find_dot_toc(sechdrs, strtab, symindex);
+ /* It's theoretically possible that a module doesn't want a
+ * .TOC. so don't fail it just for that. */
+ if (sym)
+ sym->st_value = my_r2(sechdrs, me);
+ me->arch.toc_fixed = true;
+ }
+
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
/* This is where to make the change */
location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 27/33] powerpc: Handle new ELFv2 module relocations
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (25 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 26/33] powerpc: Fix up TOC. for modules Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-26 10:28 ` Alan Modra
2014-03-25 11:44 ` [PATCH 28/33] powerpc: modules: comment about de-dotifying symbols when using the ELFv2 ABI Anton Blanchard
` (6 subsequent siblings)
33 siblings, 1 reply; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
From: Rusty Russell <rusty@rustcorp.com.au>
The new ELF ABI tends to use R_PPC64_REL16_LO and R_PPC64_REL16_HA
relocations (PC-relative), so implement them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
arch/powerpc/include/uapi/asm/elf.h | 7 ++++++-
arch/powerpc/kernel/module_64.c | 17 +++++++++++++++++
2 files changed, 23 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/uapi/asm/elf.h b/arch/powerpc/include/uapi/asm/elf.h
index 0341109..59dad11 100644
--- a/arch/powerpc/include/uapi/asm/elf.h
+++ b/arch/powerpc/include/uapi/asm/elf.h
@@ -295,8 +295,13 @@ do { \
#define R_PPC64_TLSLD 108
#define R_PPC64_TOCSAVE 109
+#define R_PPC64_REL16 249
+#define R_PPC64_REL16_LO 250
+#define R_PPC64_REL16_HI 251
+#define R_PPC64_REL16_HA 252
+
/* Keep this the last entry. */
-#define R_PPC64_NUM 110
+#define R_PPC64_NUM 253
/* There's actually a third entry here, but it's unused */
struct ppc64_opd_entry
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index f6544d7..34ba326 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -491,6 +491,23 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
*/
break;
+ case R_PPC64_REL16_HA:
+ /* Subtract location pointer */
+ value -= (unsigned long)location;
+ value = ((value + 0x8000) >> 16);
+ *((uint16_t *) location)
+ = (*((uint16_t *) location) & ~0xffff)
+ | (value & 0xffff);
+ break;
+
+ case R_PPC64_REL16_LO:
+ /* Subtract location pointer */
+ value -= (unsigned long)location;
+ *((uint16_t *) location)
+ = (*((uint16_t *) location) & ~0xffff)
+ | (value & 0xffff);
+ break;
+
default:
printk("%s: Unknown ADD relocation: %lu\n",
me->name,
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 28/33] powerpc: modules: comment about de-dotifying symbols when using the ELFv2 ABI.
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (26 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 27/33] powerpc: Handle new ELFv2 module relocations Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 29/33] powerpc: modules: change r2 save/restore offset for " Anton Blanchard
` (5 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
From: Rusty Russell <rusty@rustcorp.com.au>
ELFv2 doesn't use function descriptors, so we don't expect symbols to
start with ".". But because depmod and modpost strip ".", and we have
the special symbol ".TOC.", we still need to do it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
arch/powerpc/kernel/module_64.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 34ba326..05b27a5 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -172,6 +172,7 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
return relocs * sizeof(struct ppc64_stub_entry);
}
+/* Still needed for ELFv2, for .TOC. */
static void dedotify_versions(struct modversion_info *vers,
unsigned long size)
{
@@ -182,7 +183,7 @@ static void dedotify_versions(struct modversion_info *vers,
memmove(vers->name, vers->name+1, strlen(vers->name));
}
-/* Undefined symbols which refer to .funcname, hack to funcname */
+/* Undefined symbols which refer to .funcname, hack to funcname (or .TOC.) */
static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
{
unsigned int i;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 29/33] powerpc: modules: change r2 save/restore offset for ELFv2 ABI.
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (27 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 28/33] powerpc: modules: comment about de-dotifying symbols when using the ELFv2 ABI Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 30/33] powerpc: modules: use r12 for stub jump address Anton Blanchard
` (4 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
From: Rusty Russell <rusty@rustcorp.com.au>
ELFv2 uses a different stack offset (24 vs 40) to save r2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
arch/powerpc/kernel/module_64.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 05b27a5..8bfcf1b 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -41,6 +41,12 @@
#define DEBUGP(fmt , ...)
#endif
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+#define R2_STACK_OFFSET 24
+#else
+#define R2_STACK_OFFSET 40
+#endif
+
/* Like PPC32, we need little trampolines to do > 24-bit jumps (into
the kernel itself). But on PPC64, these need to be used for every
jump, actually, to reset r2 (TOC+0x8000). */
@@ -61,14 +67,14 @@ struct ppc64_stub_entry
r2) into the stub. */
static struct ppc64_stub_entry ppc64_stub =
{ .jump = {
- 0x3d820000, /* addis r12,r2, <high> */
- 0x398c0000, /* addi r12,r12, <low> */
+ 0x3d820000, /* addis r12,r2, <high> */
+ 0x398c0000, /* addi r12,r12, <low> */
/* Save current r2 value in magic place on the stack. */
- 0xf8410028, /* std r2,40(r1) */
- 0xe96c0020, /* ld r11,32(r12) */
- 0xe84c0028, /* ld r2,40(r12) */
- 0x7d6903a6, /* mtctr r11 */
- 0x4e800420 /* bctr */
+ 0xf8410000|R2_STACK_OFFSET, /* std r2,R2_STACK_OFFSET(r1) */
+ 0xe96c0020, /* ld r11,32(r12) */
+ 0xe84c0028, /* ld r2,40(r12) */
+ 0x7d6903a6, /* mtctr r11 */
+ 0x4e800420 /* bctr */
} };
/* Count how many different 24-bit relocations (different symbol,
@@ -338,7 +344,8 @@ static int restore_r2(u32 *instruction, struct module *me)
me->name, *instruction);
return 0;
}
- *instruction = 0xe8410028; /* ld r2,40(r1) */
+ /* ld r2,R2_STACK_OFFSET(r1) */
+ *instruction = 0xe8410000 | R2_STACK_OFFSET;
return 1;
}
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 30/33] powerpc: modules: use r12 for stub jump address.
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (28 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 29/33] powerpc: modules: change r2 save/restore offset for " Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 31/33] powerpc: modules: skip r2 setup for ELFv2 Anton Blanchard
` (3 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
From: Rusty Russell <rusty@rustcorp.com.au>
In ELFv2, r12 is supposed to equal to PC on entry to a function.
Our stubs use r11, so change swap that with r12.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
arch/powerpc/kernel/module_64.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 8bfcf1b..f8b6d28 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -67,13 +67,13 @@ struct ppc64_stub_entry
r2) into the stub. */
static struct ppc64_stub_entry ppc64_stub =
{ .jump = {
- 0x3d820000, /* addis r12,r2, <high> */
- 0x398c0000, /* addi r12,r12, <low> */
+ 0x3d620000, /* addis r11,r2, <high> */
+ 0x396b0000, /* addi r11,r11, <low> */
/* Save current r2 value in magic place on the stack. */
0xf8410000|R2_STACK_OFFSET, /* std r2,R2_STACK_OFFSET(r1) */
- 0xe96c0020, /* ld r11,32(r12) */
- 0xe84c0028, /* ld r2,40(r12) */
- 0x7d6903a6, /* mtctr r11 */
+ 0xe98b0020, /* ld r12,32(r11) */
+ 0xe84b0026, /* ld r2,40(r11) */
+ 0x7d8903a6, /* mtctr r12 */
0x4e800420 /* bctr */
} };
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 31/33] powerpc: modules: skip r2 setup for ELFv2
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (29 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 30/33] powerpc: modules: use r12 for stub jump address Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 32/33] powerpc: modules: implement stubs for ELFv2 ABI Anton Blanchard
` (2 subsequent siblings)
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
From: Rusty Russell <rusty@rustcorp.com.au>
ELFv2 doesn't need to set up r2 when calling a function.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
arch/powerpc/kernel/module_64.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index f8b6d28..d722249 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -59,12 +59,19 @@ struct ppc64_stub_entry
struct ppc64_opd_entry opd;
};
-/* We use a stub to fix up r2 (TOC ptr) and to jump to the (external)
- function which may be more than 24-bits away. We could simply
- patch the new r2 value and function pointer into the stub, but it's
- significantly shorter to put these values at the end of the stub
- code, and patch the stub address (32-bits relative to the TOC ptr,
- r2) into the stub. */
+/*
+ * PPC64 uses 24 bit jumps, but we need to jump into other modules or
+ * the kernel which may be further. So we jump to a stub.
+ *
+ * For ELFv1 we need to use this to set up the new r2 value (aka TOC
+ * pointer). For ELFv2 it's the callee's responsibility to set up the
+ * new r2, but for both we need to save the old r2.
+ *
+ * We could simply patch the new r2 value and function pointer into
+ * the stub, but it's significantly shorter to put these values at the
+ * end of the stub code, and patch the stub address (32-bits relative
+ * to the TOC ptr, r2) into the stub.
+ */
static struct ppc64_stub_entry ppc64_stub =
{ .jump = {
0x3d620000, /* addis r11,r2, <high> */
@@ -72,7 +79,10 @@ static struct ppc64_stub_entry ppc64_stub =
/* Save current r2 value in magic place on the stack. */
0xf8410000|R2_STACK_OFFSET, /* std r2,R2_STACK_OFFSET(r1) */
0xe98b0020, /* ld r12,32(r11) */
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+ /* Set up new r2 from function descriptor */
0xe84b0026, /* ld r2,40(r11) */
+#endif
0x7d8903a6, /* mtctr r12 */
0x4e800420 /* bctr */
} };
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 32/33] powerpc: modules: implement stubs for ELFv2 ABI.
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (30 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 31/33] powerpc: modules: skip r2 setup for ELFv2 Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 33/33] powerpc: Build little endian ppc64 kernel with ABIv2 Anton Blanchard
2014-03-25 13:18 ` [PATCH 00/33] Build ppc64le kernel using ABIv2 Ulrich Weigand
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
From: Rusty Russell <rusty@rustcorp.com.au>
ELFv2 doesn't use function descriptors, because it doesn't need to
load a new r2 when calling into a function. On the other hand, you're
supposed to use a local entry point for R_PPC_REL24 branches.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
arch/powerpc/kernel/module_64.c | 73 ++++++++++++++++++++++++++++++++++-------
1 file changed, 61 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index d722249..0423601 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -43,8 +43,58 @@
#if defined(_CALL_ELF) && _CALL_ELF == 2
#define R2_STACK_OFFSET 24
+
+/* An address is simply the address of the function. */
+typedef unsigned long func_desc_t;
+
+static func_desc_t func_desc(unsigned long addr)
+{
+ return addr;
+}
+static unsigned long func_addr(unsigned long addr)
+{
+ return addr;
+}
+static unsigned long stub_func_addr(func_desc_t func)
+{
+ return func;
+}
+
+/* PowerPC64 specific values for the Elf64_Sym st_other field. */
+#define STO_PPC64_LOCAL_BIT 5
+#define STO_PPC64_LOCAL_MASK (7 << STO_PPC64_LOCAL_BIT)
+#define PPC64_LOCAL_ENTRY_OFFSET(other) \
+ (((1 << (((other) & STO_PPC64_LOCAL_MASK) >> STO_PPC64_LOCAL_BIT)) >> 2) << 2)
+
+static unsigned int local_entry_offset(const Elf64_Sym *sym)
+{
+ /* sym->st_other indicates offset to local entry point
+ * (otherwise it will assume r12 is the address of the start
+ * of function and try to derive r2 from it). */
+ return PPC64_LOCAL_ENTRY_OFFSET(sym->st_other);
+}
#else
#define R2_STACK_OFFSET 40
+
+/* An address is address of the OPD entry, which contains address of fn. */
+typedef struct ppc64_opd_entry func_desc_t;
+
+static func_desc_t func_desc(unsigned long addr)
+{
+ return *(struct ppc64_opd_entry *)addr;
+}
+static unsigned long func_addr(unsigned long addr)
+{
+ return func_desc(addr).funcaddr;
+}
+static unsigned long stub_func_addr(func_desc_t func)
+{
+ return func.funcaddr;
+}
+static unsigned int local_entry_offset(const Elf64_Sym *sym)
+{
+ return 0;
+}
#endif
/* Like PPC32, we need little trampolines to do > 24-bit jumps (into
@@ -56,7 +106,7 @@ struct ppc64_stub_entry
u32 jump[7];
u32 unused;
/* Data for the above code */
- struct ppc64_opd_entry opd;
+ func_desc_t funcdata;
};
/*
@@ -225,7 +275,7 @@ static Elf64_Sym *find_dot_toc(Elf64_Shdr *sechdrs,
for (i = 1; i < numsyms; i++) {
if (syms[i].st_shndx == SHN_UNDEF
- && strcmp(strtab + syms[i].st_name, ".TOC.") == 0)
+ && strcmp(strtab + syms[i].st_name, "TOC.") == 0)
return &syms[i];
}
return NULL;
@@ -295,7 +345,7 @@ static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me)
/* Patch stub to reference function and correct r2 value. */
static inline int create_stub(Elf64_Shdr *sechdrs,
struct ppc64_stub_entry *entry,
- struct ppc64_opd_entry *opd,
+ unsigned long addr,
struct module *me)
{
long reladdr;
@@ -313,33 +363,31 @@ static inline int create_stub(Elf64_Shdr *sechdrs,
entry->jump[0] |= PPC_HA(reladdr);
entry->jump[1] |= PPC_LO(reladdr);
- entry->opd.funcaddr = opd->funcaddr;
- entry->opd.r2 = opd->r2;
+ entry->funcdata = func_desc(addr);
return 1;
}
-/* Create stub to jump to function described in this OPD: we need the
+/* Create stub to jump to function described in this OPD/ptr: we need the
stub to set up the TOC ptr (r2) for the function. */
static unsigned long stub_for_addr(Elf64_Shdr *sechdrs,
- unsigned long opdaddr,
+ unsigned long addr,
struct module *me)
{
struct ppc64_stub_entry *stubs;
- struct ppc64_opd_entry *opd = (void *)opdaddr;
unsigned int i, num_stubs;
num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*stubs);
/* Find this stub, or if that fails, the next avail. entry */
stubs = (void *)sechdrs[me->arch.stubs_section].sh_addr;
- for (i = 0; stubs[i].opd.funcaddr; i++) {
+ for (i = 0; stub_func_addr(stubs[i].funcdata); i++) {
BUG_ON(i >= num_stubs);
- if (stubs[i].opd.funcaddr == opd->funcaddr)
+ if (stub_func_addr(stubs[i].funcdata) == func_addr(addr))
return (unsigned long)&stubs[i];
}
- if (!create_stub(sechdrs, &stubs[i], opd, me))
+ if (!create_stub(sechdrs, &stubs[i], addr, me))
return 0;
return (unsigned long)&stubs[i];
@@ -480,7 +528,8 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
return -ENOENT;
if (!restore_r2((u32 *)location + 1, me))
return -ENOEXEC;
- }
+ } else
+ value += local_entry_offset(sym);
/* Convert value to relative */
value -= (unsigned long)location;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH 33/33] powerpc: Build little endian ppc64 kernel with ABIv2
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (31 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 32/33] powerpc: modules: implement stubs for ELFv2 ABI Anton Blanchard
@ 2014-03-25 11:44 ` Anton Blanchard
2014-03-25 13:18 ` [PATCH 00/33] Build ppc64le kernel using ABIv2 Ulrich Weigand
33 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-25 11:44 UTC (permalink / raw)
To: benh, paulus, rusty, ulrich.weigand, amodra, mikey, mjw; +Cc: linuxppc-dev
Build the little endian ppc64 kernel with ABIv2 if the toolchain
supports it. We can identify an ABIv2 capable toolchain by the
-mabi=elfv2 compiler flag.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
arch/powerpc/Makefile | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 0f4344e..411db45 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -112,8 +112,12 @@ else
endif
endif
-CFLAGS-$(CONFIG_PPC64) := -mtraceback=no -mcall-aixdesc
-CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv1)
+CFLAGS-$(CONFIG_PPC64) := -mtraceback=no
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
+CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2,-mcall-aixdesc)
+else
+CFLAGS-$(CONFIG_PPC64) += -mcall-aixdesc
+endif
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,-mminimal-toc)
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions)
CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 $(MULTIPLEWORD)
--
1.8.3.2
^ permalink raw reply related [flat|nested] 42+ messages in thread
* Re: [PATCH 00/33] Build ppc64le kernel using ABIv2
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
` (32 preceding siblings ...)
2014-03-25 11:44 ` [PATCH 33/33] powerpc: Build little endian ppc64 kernel with ABIv2 Anton Blanchard
@ 2014-03-25 13:18 ` Ulrich Weigand
2014-03-26 11:20 ` Anton Blanchard
33 siblings, 1 reply; 42+ messages in thread
From: Ulrich Weigand @ 2014-03-25 13:18 UTC (permalink / raw)
To: Anton Blanchard; +Cc: mikey, amodra, rusty, mjw, paulus, linuxppc-dev
Anton Blanchard <anton@samba.org> wrote on 25.03.2014 12:44:06:
> There are two known outstanding issues:
>
> - If a kernel module calls into an exported assembly function
> which in turns calls out to C, r2 is going to be wrong. One example
> is __copy_tofrom_user_power7.
>
> The reason is _GLOBAL() doesn't have a global entry point setup
> with the associated addis/addi used to create r2. I tried adding
> it and quickly realised that _GLOBAL is used places that will not
> tolerate the addi/addis (eg __start()).
You probably should have two different macros _GLOBAL_TOC vs. _GLOBAL
(or _GLOBAL vs. _GLOBAL_NOTOC), and use the variant that provides a
global entry point setting up the TOC only with those functions that
actually require a TOC.
> - arch/powerpc/platforms/pseries/hvCall.S assumes we always have a
> parameter save area, which is incorrect for ABIv2. I tried to be
> intelligent and use the toc save area to store some information
> but that failed as soon as we started using modules. It would be
> nice to avoid a stack frame in the common (tracepoints disabled)
> case, but we may end up having to allocate one.
When I looked at this last time, I remarked:
>./platforms/pseries/hvCall.S:
>./platforms/cell/beat_hvCall.S:
>Looks safe since all functions are called via varargs prototypes
>(or > 8 integer arguments).
Checking again, this still seems true. These are the prototypes
for all the functions in hvCall.S:
long plpar_hcall_norets(unsigned long opcode, ...);
long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);
long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
long plpar_hcall9_raw(unsigned long opcode, unsigned long *retbuf, ...);
Functions like that *will* always have a save area allocated by
the caller, even in the ELFv2 ABI.
Am I missing something here?
Bye,
Ulrich
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH 10/33] powerpc: Ignore TOC relocations
2014-03-25 11:44 ` [PATCH 10/33] powerpc: Ignore TOC relocations Anton Blanchard
@ 2014-03-26 9:36 ` Alan Modra
2014-04-22 22:02 ` Anton Blanchard
0 siblings, 1 reply; 42+ messages in thread
From: Alan Modra @ 2014-03-26 9:36 UTC (permalink / raw)
To: Anton Blanchard; +Cc: mikey, rusty, ulrich.weigand, mjw, paulus, linuxppc-dev
On Tue, Mar 25, 2014 at 10:44:16PM +1100, Anton Blanchard wrote:
> The linker fixes up TOC. relocations, so prom_init_check.sh should
> ignore them.
Err, .TOC. you mean. Presumably something strips off the leading dot
somewhere?
> -btext_setup_display"
> +btext_setup_display TOC."
--
Alan Modra
Australia Development Lab, IBM
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH 15/33] powerpc: Fix ABIv2 issues with stack offsets in assembly code
2014-03-25 11:44 ` [PATCH 15/33] powerpc: Fix ABIv2 issues with stack offsets in assembly code Anton Blanchard
@ 2014-03-26 10:04 ` Alan Modra
2014-03-26 10:06 ` Alan Modra
2014-04-01 13:54 ` Philippe Bergheaud
1 sibling, 1 reply; 42+ messages in thread
From: Alan Modra @ 2014-03-26 10:04 UTC (permalink / raw)
To: Anton Blanchard; +Cc: mikey, rusty, ulrich.weigand, mjw, paulus, linuxppc-dev
On Tue, Mar 25, 2014 at 10:44:21PM +1100, Anton Blanchard wrote:
> Fix STK_PARAM and use it instead of hardcoding ABIv1 offsets.
> _GLOBAL(memcpy)
> BEGIN_FTR_SECTION
> - std r3,48(r1) /* save destination pointer for return value */
> + std r3,STK_PARAM(R3)(r1) /* save destination pointer for return value */
Here and elsewhere you're assuming you have a parameter save area.
That won't be true with ELFv2 for calls to functions like memcpy.
typedef __SIZE_TYPE__ size_t;
extern void *memcpy (void *dest, const void *src, size_t n);
void foo (void *dest, const void *src, size_t n)
{
memcpy (dest, src, n);
}
foo:
0: addis 2,12,.TOC.-0b@ha
addi 2,2,.TOC.-0b@l
.localentry foo,.-foo
mflr 0
std 0,16(1)
stdu 1,-32(1) # <========
bl memcpy
nop
addi 1,1,32
ld 0,16(1)
mtlr 0
blr
--
Alan Modra
Australia Development Lab, IBM
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH 15/33] powerpc: Fix ABIv2 issues with stack offsets in assembly code
2014-03-26 10:04 ` Alan Modra
@ 2014-03-26 10:06 ` Alan Modra
0 siblings, 0 replies; 42+ messages in thread
From: Alan Modra @ 2014-03-26 10:06 UTC (permalink / raw)
To: Anton Blanchard; +Cc: mikey, rusty, ulrich.weigand, mjw, paulus, linuxppc-dev
On Wed, Mar 26, 2014 at 08:34:49PM +1030, Alan Modra wrote:
> On Tue, Mar 25, 2014 at 10:44:21PM +1100, Anton Blanchard wrote:
> > Fix STK_PARAM and use it instead of hardcoding ABIv1 offsets.
>
> > _GLOBAL(memcpy)
> > BEGIN_FTR_SECTION
> > - std r3,48(r1) /* save destination pointer for return value */
> > + std r3,STK_PARAM(R3)(r1) /* save destination pointer for return value */
>
> Here and elsewhere you're assuming you have a parameter save area.
> That won't be true with ELFv2 for calls to functions like memcpy.
Nevermind, I see you fixed that with the next patch..
--
Alan Modra
Australia Development Lab, IBM
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH 27/33] powerpc: Handle new ELFv2 module relocations
2014-03-25 11:44 ` [PATCH 27/33] powerpc: Handle new ELFv2 module relocations Anton Blanchard
@ 2014-03-26 10:28 ` Alan Modra
0 siblings, 0 replies; 42+ messages in thread
From: Alan Modra @ 2014-03-26 10:28 UTC (permalink / raw)
To: Anton Blanchard; +Cc: mikey, rusty, ulrich.weigand, mjw, paulus, linuxppc-dev
On Tue, Mar 25, 2014 at 10:44:33PM +1100, Anton Blanchard wrote:
> From: Rusty Russell <rusty@rustcorp.com.au>
> + case R_PPC64_REL16_HA:
> + /* Subtract location pointer */
> + value -= (unsigned long)location;
> + value = ((value + 0x8000) >> 16);
> + *((uint16_t *) location)
> + = (*((uint16_t *) location) & ~0xffff)
> + | (value & 0xffff);
There's not much point reading the uint16_t.
*(uint16_t *) location = value;
> + break;
> +
> + case R_PPC64_REL16_LO:
> + /* Subtract location pointer */
> + value -= (unsigned long)location;
> + *((uint16_t *) location)
> + = (*((uint16_t *) location) & ~0xffff)
> + | (value & 0xffff);
and again.
> + break;
> +
> default:
> printk("%s: Unknown ADD relocation: %lu\n",
> me->name,
--
Alan Modra
Australia Development Lab, IBM
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH 00/33] Build ppc64le kernel using ABIv2
2014-03-25 13:18 ` [PATCH 00/33] Build ppc64le kernel using ABIv2 Ulrich Weigand
@ 2014-03-26 11:20 ` Anton Blanchard
0 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-03-26 11:20 UTC (permalink / raw)
To: Ulrich Weigand; +Cc: mikey, amodra, rusty, mjw, paulus, linuxppc-dev
Hi Uli,
> You probably should have two different macros _GLOBAL_TOC vs. _GLOBAL
> (or _GLOBAL vs. _GLOBAL_NOTOC), and use the variant that provides a
> global entry point setting up the TOC only with those functions that
> actually require a TOC.
I was worried that we might introduce subtle bugs by forgetting to use
the right version, but I agree it seems to be the only way.
> When I looked at this last time, I remarked:
>
> >./platforms/pseries/hvCall.S:
> >./platforms/cell/beat_hvCall.S:
> >Looks safe since all functions are called via varargs prototypes
> >(or > 8 integer arguments).
>
> Checking again, this still seems true. These are the prototypes
> for all the functions in hvCall.S:
You are right, I forgot about your previous review. Thanks!
Anton
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH 15/33] powerpc: Fix ABIv2 issues with stack offsets in assembly code
2014-03-25 11:44 ` [PATCH 15/33] powerpc: Fix ABIv2 issues with stack offsets in assembly code Anton Blanchard
2014-03-26 10:04 ` Alan Modra
@ 2014-04-01 13:54 ` Philippe Bergheaud
1 sibling, 0 replies; 42+ messages in thread
From: Philippe Bergheaud @ 2014-04-01 13:54 UTC (permalink / raw)
To: Anton Blanchard
Cc: mikey, amodra, rusty, ulrich.weigand, paulus, mjw, linuxppc-dev
Anton Blanchard wrote:
> diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S
> index 72ad055..01da956 100644
> --- a/arch/powerpc/lib/memcpy_64.S
> +++ b/arch/powerpc/lib/memcpy_64.S
> @@ -12,7 +12,7 @@
> .align 7
> _GLOBAL(memcpy)
> BEGIN_FTR_SECTION
> - std r3,48(r1) /* save destination pointer for return value */
> + std r3,STK_PARAM(R3)(r1) /* save destination pointer for return value */
> FTR_SECTION_ELSE
> #ifndef SELFTEST
> b memcpy_power7
This chunk is rejected when applied to linux-3.14, because of the reference to SELTEST.
The last three context lines should rather read:
FTR_SECTION_ELSE
b memcpy_power7
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
Same issue with [PATCH 16/33] powerpc: Fix unsafe accesses to parameter area in ELFv2.
Philippe
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH 10/33] powerpc: Ignore TOC relocations
2014-03-26 9:36 ` Alan Modra
@ 2014-04-22 22:02 ` Anton Blanchard
0 siblings, 0 replies; 42+ messages in thread
From: Anton Blanchard @ 2014-04-22 22:02 UTC (permalink / raw)
To: Alan Modra; +Cc: mikey, rusty, ulrich.weigand, mjw, paulus, linuxppc-dev
Hi Alan,
> > The linker fixes up TOC. relocations, so prom_init_check.sh should
> > ignore them.
>
> Err, .TOC. you mean. Presumably something strips off the leading dot
> somewhere?
Yeah, the script strips them:
# On 64-bit nm gives us the function descriptors, which have
# a leading . on the name, so strip it off here.
UNDEF="${UNDEF#.}"
I'll modify the commit message to be less confusing.
Anton
^ permalink raw reply [flat|nested] 42+ messages in thread
end of thread, other threads:[~2014-04-22 22:02 UTC | newest]
Thread overview: 42+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-03-25 11:44 [PATCH 00/33] Build ppc64le kernel using ABIv2 Anton Blanchard
2014-03-25 11:44 ` [PATCH 01/33] powerpc: No need to use dot symbols when branching to a function Anton Blanchard
2014-03-25 11:44 ` [PATCH 02/33] powerpc: Remove superflous function descriptors in assembly only code Anton Blanchard
2014-03-25 11:44 ` [PATCH 03/33] powerpc: Don't use a function descriptor for system call table Anton Blanchard
2014-03-25 11:44 ` [PATCH 04/33] powerpc: Remove some unnecessary uses of _GLOBAL() and _STATIC() Anton Blanchard
2014-03-25 11:44 ` [PATCH 05/33] powerpc: Remove _INIT_GLOBAL(), _STATIC() and _INIT_STATIC() Anton Blanchard
2014-03-25 11:44 ` [PATCH 06/33] powerpc: Remove dot symbol usage in exception macros Anton Blanchard
2014-03-25 11:44 ` [PATCH 07/33] powerpc: Create DOTSYM to wrap dot symbol usage Anton Blanchard
2014-03-25 11:44 ` [PATCH 08/33] powerpc: Remove function descriptors and dot symbols on new ABI Anton Blanchard
2014-03-25 11:44 ` [PATCH 09/33] powerpc: ABIv2 function calls must place target address in r12 Anton Blanchard
2014-03-25 11:44 ` [PATCH 10/33] powerpc: Ignore TOC relocations Anton Blanchard
2014-03-26 9:36 ` Alan Modra
2014-04-22 22:02 ` Anton Blanchard
2014-03-25 11:44 ` [PATCH 11/33] powerpc: Add ABIv2 support to ppc_function_entry Anton Blanchard
2014-03-25 11:44 ` [PATCH 12/33] powerpc: Use ppc_function_entry instead of open coding it Anton Blanchard
2014-03-25 11:44 ` [PATCH 13/33] powerpc: Fix branch patching code for ABIv2 Anton Blanchard
2014-03-25 11:44 ` [PATCH 14/33] powerpc: Fix kernel thread creation on ABIv2 Anton Blanchard
2014-03-25 11:44 ` [PATCH 15/33] powerpc: Fix ABIv2 issues with stack offsets in assembly code Anton Blanchard
2014-03-26 10:04 ` Alan Modra
2014-03-26 10:06 ` Alan Modra
2014-04-01 13:54 ` Philippe Bergheaud
2014-03-25 11:44 ` [PATCH 16/33] powerpc: Fix unsafe accesses to parameter area in ELFv2 Anton Blanchard
2014-03-25 11:44 ` [PATCH 17/33] powerpc/tm: Use STK_PARAM Anton Blanchard
2014-03-25 11:44 ` [PATCH 18/33] powerpc/tm: Fix GOT save offset for ABIv2 Anton Blanchard
2014-03-25 11:44 ` [PATCH 19/33] powerpc/tracing: TRACE_WITH_FRAME_BUFFER creates invalid stack frames Anton Blanchard
2014-03-25 11:44 ` [PATCH 20/33] powerpc: Fix SMP issues with ppc64le ABIv2 Anton Blanchard
2014-03-25 11:44 ` [PATCH 21/33] powerpc: Fix ABIv2 issue with dereference_function_descriptor Anton Blanchard
2014-03-25 11:44 ` [PATCH 22/33] powerpc: make module stub code endian independent Anton Blanchard
2014-03-25 11:44 ` [PATCH 23/33] powerpc: modules implement R_PPC64_TOCSAVE relocation Anton Blanchard
2014-03-25 11:44 ` [PATCH 24/33] powerpc: EXPORT_SYMBOL(.TOC.) Anton Blanchard
2014-03-25 11:44 ` [PATCH 25/33] powerpc: module: handle MODVERSION for .TOC Anton Blanchard
2014-03-25 11:44 ` [PATCH 26/33] powerpc: Fix up TOC. for modules Anton Blanchard
2014-03-25 11:44 ` [PATCH 27/33] powerpc: Handle new ELFv2 module relocations Anton Blanchard
2014-03-26 10:28 ` Alan Modra
2014-03-25 11:44 ` [PATCH 28/33] powerpc: modules: comment about de-dotifying symbols when using the ELFv2 ABI Anton Blanchard
2014-03-25 11:44 ` [PATCH 29/33] powerpc: modules: change r2 save/restore offset for " Anton Blanchard
2014-03-25 11:44 ` [PATCH 30/33] powerpc: modules: use r12 for stub jump address Anton Blanchard
2014-03-25 11:44 ` [PATCH 31/33] powerpc: modules: skip r2 setup for ELFv2 Anton Blanchard
2014-03-25 11:44 ` [PATCH 32/33] powerpc: modules: implement stubs for ELFv2 ABI Anton Blanchard
2014-03-25 11:44 ` [PATCH 33/33] powerpc: Build little endian ppc64 kernel with ABIv2 Anton Blanchard
2014-03-25 13:18 ` [PATCH 00/33] Build ppc64le kernel using ABIv2 Ulrich Weigand
2014-03-26 11:20 ` Anton Blanchard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.