* [PATCH v1 1/8] ARM: debug: add HiP04 debug uart
2014-04-01 8:03 [PATCH v1 0/8] support Hisilicon HiP04 Haojian Zhuang
@ 2014-04-01 8:03 ` Haojian Zhuang
2014-04-01 8:03 ` [PATCH v1 2/8] ARM: hisi: add ARCH_HISI Haojian Zhuang
` (6 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2014-04-01 8:03 UTC (permalink / raw)
To: linux-arm-kernel
Add the support of Hisilicon HiP04 debug uart.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/Kconfig.debug | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9326c4c..a1d3c44 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -223,6 +223,14 @@ choice
Say Y here if you want kernel low-level debugging support
on HI3716 UART.
+ config DEBUG_HIP04_UART
+ bool "Hisilicon HiP01 Debug UART"
+ depends on ARCH_HIP04
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on HIP04 UART.
+
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
@@ -1053,6 +1061,7 @@ config DEBUG_UART_PHYS
default 0xd4017000 if DEBUG_MMP_UART2
default 0xd4018000 if DEBUG_MMP_UART3
default 0xe0000000 if ARCH_SPEAR13XX
+ default 0xe4007000 if DEBUG_HIP04_UART
default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
@@ -1085,6 +1094,7 @@ config DEBUG_UART_VIRT
default 0xf4090000 if ARCH_LPC32XX
default 0xf4200000 if ARCH_GEMINI
default 0xf7fc9000 if DEBUG_BERLIN_UART
+ default 0xf8007000 if DEBUG_HIP04_UART
default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
--
1.8.3.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 2/8] ARM: hisi: add ARCH_HISI
2014-04-01 8:03 [PATCH v1 0/8] support Hisilicon HiP04 Haojian Zhuang
2014-04-01 8:03 ` [PATCH v1 1/8] ARM: debug: add HiP04 debug uart Haojian Zhuang
@ 2014-04-01 8:03 ` Haojian Zhuang
2014-04-01 8:03 ` [PATCH v1 3/8] irq: gic: use mask field in GICC_IAR Haojian Zhuang
` (5 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2014-04-01 8:03 UTC (permalink / raw)
To: linux-arm-kernel
Since multiple ARCH configuration will be appended into mach-hisi
directory, add ARCH_HISI as common configuration for different ARCH in
mach-hisi.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/Makefile | 2 +-
arch/arm/mach-hisi/Kconfig | 16 ++++++++++++++--
2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 41c1931..4c2798a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -154,7 +154,7 @@ machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_GEMINI) += gemini
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
-machine-$(CONFIG_ARCH_HI3xxx) += hisi
+machine-$(CONFIG_ARCH_HISI) += hisi
machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
machine-$(CONFIG_ARCH_IOP13XX) += iop13xx
machine-$(CONFIG_ARCH_IOP32X) += iop32x
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index feee4db..da16efd 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -1,8 +1,16 @@
-config ARCH_HI3xxx
- bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7
+config ARCH_HISI
+ bool "Hisilicon SoC Support"
+ depends on ARCH_MULTIPLATFORM
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
+
+if ARCH_HISI
+
+menu "Hisilicon platform type"
+
+config ARCH_HI3xxx
+ bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7
select CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
@@ -10,3 +18,7 @@ config ARCH_HI3xxx
select PINCTRL_SINGLE
help
Support for Hisilicon Hi36xx/Hi37xx processor family
+
+endmenu
+
+endif
--
1.8.3.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 3/8] irq: gic: use mask field in GICC_IAR
2014-04-01 8:03 [PATCH v1 0/8] support Hisilicon HiP04 Haojian Zhuang
2014-04-01 8:03 ` [PATCH v1 1/8] ARM: debug: add HiP04 debug uart Haojian Zhuang
2014-04-01 8:03 ` [PATCH v1 2/8] ARM: hisi: add ARCH_HISI Haojian Zhuang
@ 2014-04-01 8:03 ` Haojian Zhuang
2014-04-01 8:03 ` [PATCH v1 4/8] irq: gic: extends the cpu interface to 16 Haojian Zhuang
` (4 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2014-04-01 8:03 UTC (permalink / raw)
To: linux-arm-kernel
Bit[9:0] is interrupt ID field in GICC_IAR. Bit[12:10] is CPU ID field,
and others are reserved.
So we should use GICC_IAR_INTID to get interrupt ID. It's not a good way
to use ~0x1c00 (CPU ID field) to get interrupt ID.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
drivers/irqchip/irq-gic.c | 2 +-
include/linux/irqchip/arm-gic.h | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 4300b66..8fd27bf 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -287,7 +287,7 @@ static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
do {
irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
- irqnr = irqstat & ~0x1c00;
+ irqnr = irqstat & GICC_IAR_INTID;
if (likely(irqnr > 15 && irqnr < 1021)) {
irqnr = irq_find_mapping(gic->domain, irqnr);
diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
index 7ed92d0..55933aa 100644
--- a/include/linux/irqchip/arm-gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -21,6 +21,8 @@
#define GIC_CPU_ACTIVEPRIO 0xd0
#define GIC_CPU_IDENT 0xfc
+#define GICC_IAR_INTID 0x3ff
+
#define GIC_DIST_CTRL 0x000
#define GIC_DIST_CTR 0x004
#define GIC_DIST_IGROUP 0x080
--
1.8.3.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 4/8] irq: gic: extends the cpu interface to 16
2014-04-01 8:03 [PATCH v1 0/8] support Hisilicon HiP04 Haojian Zhuang
` (2 preceding siblings ...)
2014-04-01 8:03 ` [PATCH v1 3/8] irq: gic: use mask field in GICC_IAR Haojian Zhuang
@ 2014-04-01 8:03 ` Haojian Zhuang
2014-04-01 8:03 ` [PATCH v1 5/8] ARM: mcpm: change max clusters to 4 Haojian Zhuang
` (3 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2014-04-01 8:03 UTC (permalink / raw)
To: linux-arm-kernel
In order to support 16 CPUs, Hisilicon extends the GIC to support the
number of CPU interfaces from 8 to 16.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
drivers/irqchip/irq-gic.c | 78 ++++++++++++++++++++++++++++-------------------
1 file changed, 47 insertions(+), 31 deletions(-)
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 8fd27bf..44eff46 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -76,9 +76,12 @@ static DEFINE_RAW_SPINLOCK(irq_controller_lock);
* The GIC mapping of CPU interfaces does not necessarily match
* the logical CPU numbering. Let's use a mapping as returned
* by the GIC itself.
+ *
+ * Hisilicon HiP04 extends the number of CPU interface from 8 to 16.
*/
-#define NR_GIC_CPU_IF 8
-static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly;
+#define MAX_NR_GIC_CPU_IF 16
+static u16 gic_cpu_map[MAX_NR_GIC_CPU_IF] __read_mostly;
+static int nr_gic_cpu_if = 8; /* The standard GIC supports 8 CPUs */
/*
* Supported arch specific GIC irq extension.
@@ -245,16 +248,19 @@ static int gic_retrigger(struct irq_data *d)
static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
bool force)
{
- void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
- unsigned int shift = (gic_irq(d) % 4) * 8;
+ void __iomem *reg;
+ unsigned int shift, step;
unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
u32 val, mask, bit;
-
- if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
+ if (cpu >= nr_gic_cpu_if || cpu >= nr_cpu_ids)
return -EINVAL;
+ step = BITS_PER_LONG / nr_gic_cpu_if;
+ shift = (gic_irq(d) % step) * nr_gic_cpu_if;
+ reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) / step * 4);
+
raw_spin_lock(&irq_controller_lock);
- mask = 0xff << shift;
+ mask = ((1 << nr_gic_cpu_if) - 1) << shift;
bit = gic_cpu_map[cpu] << shift;
val = readl_relaxed(reg) & ~mask;
writel_relaxed(val | bit, reg);
@@ -354,15 +360,17 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
irq_set_chained_handler(irq, gic_handle_cascade_irq);
}
-static u8 gic_get_cpumask(struct gic_chip_data *gic)
+static u16 gic_get_cpumask(struct gic_chip_data *gic)
{
void __iomem *base = gic_data_dist_base(gic);
- u32 mask, i;
-
- for (i = mask = 0; i < 32; i += 4) {
- mask = readl_relaxed(base + GIC_DIST_TARGET + i);
- mask |= mask >> 16;
- mask |= mask >> 8;
+ u32 mask, i, j, step;
+
+ /* get the number of CPU fields in GIC_DIST_TARGET register */
+ step = BITS_PER_LONG / nr_gic_cpu_if;
+ for (i = mask = 0; i < 32; i += step) {
+ mask = readl_relaxed(base + GIC_DIST_TARGET + i / step * 4);
+ for (j = BITS_PER_LONG >> 1; j >= nr_gic_cpu_if; j >>= 1)
+ mask |= mask >> j;
if (mask)
break;
}
@@ -375,7 +383,7 @@ static u8 gic_get_cpumask(struct gic_chip_data *gic)
static void __init gic_dist_init(struct gic_chip_data *gic)
{
- unsigned int i;
+ unsigned int i, step;
u32 cpumask;
unsigned int gic_irqs = gic->gic_irqs;
void __iomem *base = gic_data_dist_base(gic);
@@ -392,10 +400,11 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
* Set all global interrupts to this CPU only.
*/
cpumask = gic_get_cpumask(gic);
- cpumask |= cpumask << 8;
- cpumask |= cpumask << 16;
- for (i = 32; i < gic_irqs; i += 4)
- writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
+ for (i = nr_gic_cpu_if; i < BITS_PER_LONG; i <<= 1)
+ cpumask |= cpumask << i;
+ step = BITS_PER_LONG / nr_gic_cpu_if;
+ for (i = 32; i < gic_irqs; i += step)
+ writel_relaxed(cpumask, base + GIC_DIST_TARGET + i / step * 4);
/*
* Set priority on all global interrupts.
@@ -423,7 +432,7 @@ static void gic_cpu_init(struct gic_chip_data *gic)
/*
* Get what the GIC says our CPU mask is.
*/
- BUG_ON(cpu >= NR_GIC_CPU_IF);
+ BUG_ON(cpu >= nr_gic_cpu_if);
cpu_mask = gic_get_cpumask(gic);
gic_cpu_map[cpu] = cpu_mask;
@@ -431,7 +440,7 @@ static void gic_cpu_init(struct gic_chip_data *gic)
* Clear our mask from the other map entries in case they're
* still undefined.
*/
- for (i = 0; i < NR_GIC_CPU_IF; i++)
+ for (i = 0; i < nr_gic_cpu_if; i++)
if (i != cpu)
gic_cpu_map[i] &= ~cpu_mask;
@@ -469,7 +478,7 @@ static void gic_dist_save(unsigned int gic_nr)
{
unsigned int gic_irqs;
void __iomem *dist_base;
- int i;
+ int i, step;
if (gic_nr >= MAX_GIC_NR)
BUG();
@@ -484,7 +493,8 @@ static void gic_dist_save(unsigned int gic_nr)
gic_data[gic_nr].saved_spi_conf[i] =
readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
- for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ step = BITS_PER_LONG / nr_gic_cpu_if;
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, step); i++)
gic_data[gic_nr].saved_spi_target[i] =
readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
@@ -503,7 +513,7 @@ static void gic_dist_save(unsigned int gic_nr)
static void gic_dist_restore(unsigned int gic_nr)
{
unsigned int gic_irqs;
- unsigned int i;
+ unsigned int i, step;
void __iomem *dist_base;
if (gic_nr >= MAX_GIC_NR)
@@ -525,7 +535,8 @@ static void gic_dist_restore(unsigned int gic_nr)
writel_relaxed(0xa0a0a0a0,
dist_base + GIC_DIST_PRI + i * 4);
- for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ step = BITS_PER_LONG / nr_gic_cpu_if;
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, step); i++)
writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
dist_base + GIC_DIST_TARGET + i * 4);
@@ -666,8 +677,8 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
dmb(ishst);
/* this always happens on GIC0 */
- writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
-
+ writel_relaxed(map << (8 + 16 - nr_gic_cpu_if) | irq,
+ gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
}
#endif
@@ -681,7 +692,7 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
*/
void gic_send_sgi(unsigned int cpu_id, unsigned int irq)
{
- BUG_ON(cpu_id >= NR_GIC_CPU_IF);
+ BUG_ON(cpu_id >= nr_gic_cpu_if);
cpu_id = 1 << cpu_id;
/* this always happens on GIC0 */
writel_relaxed((cpu_id << 16) | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
@@ -700,7 +711,7 @@ int gic_get_cpu_id(unsigned int cpu)
{
unsigned int cpu_bit;
- if (cpu >= NR_GIC_CPU_IF)
+ if (cpu >= nr_gic_cpu_if)
return -1;
cpu_bit = gic_cpu_map[cpu];
if (cpu_bit & (cpu_bit - 1))
@@ -971,8 +982,8 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
* Initialize the CPU interface map to all CPUs.
* It will be refined as each CPU probes its ID.
*/
- for (i = 0; i < NR_GIC_CPU_IF; i++)
- gic_cpu_map[i] = 0xff;
+ for (i = 0; i < nr_gic_cpu_if; i++)
+ gic_cpu_map[i] = (1 << MAX_NR_GIC_CPU_IF) - 1;
/*
* For primary GICs, skip over SGIs.
@@ -1047,6 +1058,10 @@ gic_of_init(struct device_node *node, struct device_node *parent)
if (WARN_ON(!node))
return -ENODEV;
+ /* HiP04 supports 16 CPUs@most */
+ if (of_device_is_compatible(node, "hisilicon,hip04-gic"))
+ nr_gic_cpu_if = 16;
+
dist_base = of_iomap(node, 0);
WARN(!dist_base, "unable to map gic dist registers\n");
@@ -1069,6 +1084,7 @@ gic_of_init(struct device_node *node, struct device_node *parent)
}
IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
+IRQCHIP_DECLARE(hip04_gic, "hisilicon,hip04-gic", gic_of_init);
IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
--
1.8.3.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 5/8] ARM: mcpm: change max clusters to 4
2014-04-01 8:03 [PATCH v1 0/8] support Hisilicon HiP04 Haojian Zhuang
` (3 preceding siblings ...)
2014-04-01 8:03 ` [PATCH v1 4/8] irq: gic: extends the cpu interface to 16 Haojian Zhuang
@ 2014-04-01 8:03 ` Haojian Zhuang
2014-04-01 8:03 ` [PATCH v1 6/8] ARM: hisi: add hip04 SoC support Haojian Zhuang
` (2 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2014-04-01 8:03 UTC (permalink / raw)
To: linux-arm-kernel
In order to support 4 clusters with 4 Cortex A15 Cores in each cluster,
enlarge maximum clusters from 2 to 4 in MCPM.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/include/asm/mcpm.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h
index 608516e..68f82cf 100644
--- a/arch/arm/include/asm/mcpm.h
+++ b/arch/arm/include/asm/mcpm.h
@@ -20,7 +20,7 @@
* to consider dynamic allocation.
*/
#define MAX_CPUS_PER_CLUSTER 4
-#define MAX_NR_CLUSTERS 2
+#define MAX_NR_CLUSTERS 4
#ifndef __ASSEMBLY__
--
1.8.3.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 6/8] ARM: hisi: add hip04 SoC support
2014-04-01 8:03 [PATCH v1 0/8] support Hisilicon HiP04 Haojian Zhuang
` (4 preceding siblings ...)
2014-04-01 8:03 ` [PATCH v1 5/8] ARM: mcpm: change max clusters to 4 Haojian Zhuang
@ 2014-04-01 8:03 ` Haojian Zhuang
2014-04-04 14:57 ` Kevin Hilman
2014-04-01 8:03 ` [PATCH v1 7/8] ARM: dts: add hip04-d01 dts file Haojian Zhuang
2014-04-01 8:03 ` [PATCH v1 8/8] ARM: config: append hip04_defconfig Haojian Zhuang
7 siblings, 1 reply; 13+ messages in thread
From: Haojian Zhuang @ 2014-04-01 8:03 UTC (permalink / raw)
To: linux-arm-kernel
Hisilicon Hi3xxx is based on Cortex A9 Core. Now HiP04 SoC is based on
Cortex A15 Core. And HiP04 supports LPAE to support large memory.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/Kconfig | 2 +-
arch/arm/mach-hisi/Kconfig | 10 ++
arch/arm/mach-hisi/core.h | 6 +
arch/arm/mach-hisi/hisilicon.c | 17 +++
arch/arm/mach-hisi/platsmp.c | 257 +++++++++++++++++++++++++++++++++++++++++
5 files changed, 291 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a48712e..3f2e973 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1107,7 +1107,7 @@ source arch/arm/mm/Kconfig
config ARM_NR_BANKS
int
- default 16 if ARCH_EP93XX
+ default 16 if ARCH_EP93XX || ARCH_HIP04
default 8
config IWMMXT
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index da16efd..707abfe 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -19,6 +19,16 @@ config ARCH_HI3xxx
help
Support for Hisilicon Hi36xx/Hi37xx processor family
+config ARCH_HIP04
+ bool "Hisilicon HiP04 Cortex A15 family" if ARCH_MULTI_V7
+ select ARM_LPAE
+ select HAVE_ARM_ARCH_TIMER
+ select HAVE_SMP
+ select MCPM
+ select SMP
+ help
+ Support for Hisilicon HiP04 processor family
+
endmenu
endif
diff --git a/arch/arm/mach-hisi/core.h b/arch/arm/mach-hisi/core.h
index af23ec2..e008c7a 100644
--- a/arch/arm/mach-hisi/core.h
+++ b/arch/arm/mach-hisi/core.h
@@ -12,4 +12,10 @@ extern void hi3xxx_cpu_die(unsigned int cpu);
extern int hi3xxx_cpu_kill(unsigned int cpu);
extern void hi3xxx_set_cpu(int cpu, bool enable);
+#define HIP04_BOOTWRAPPER_PHYS 0x10c00000
+#define HIP04_BOOTWRAPPER_MAGIC 0xa5a5a5a5
+#define HIP04_BOOTWRAPPER_SIZE 0x00010000
+
+extern bool __init hip04_smp_init_ops(void);
+
#endif
diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c
index 741faf3..ca277de 100644
--- a/arch/arm/mach-hisi/hisilicon.c
+++ b/arch/arm/mach-hisi/hisilicon.c
@@ -14,6 +14,7 @@
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/irqchip.h>
+#include <linux/memblock.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
@@ -88,3 +89,19 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
.smp = smp_ops(hi3xxx_smp_ops),
.restart = hi3xxx_restart,
MACHINE_END
+
+static const char *hip04_compat[] __initconst = {
+ "hisilicon,hip04-d01",
+ NULL,
+};
+
+static void __init hip04_reserve(void)
+{
+ memblock_reserve(HIP04_BOOTWRAPPER_PHYS, HIP04_BOOTWRAPPER_SIZE);
+}
+
+DT_MACHINE_START(HIP04, "Hisilicon HiP04 (Flattened Device Tree)")
+ .dt_compat = hip04_compat,
+ .smp_init = smp_init_ops(hip04_smp_init_ops),
+ .reserve = hip04_reserve,
+MACHINE_END
diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c
index 471f1ee..a0082d7 100644
--- a/arch/arm/mach-hisi/platsmp.c
+++ b/arch/arm/mach-hisi/platsmp.c
@@ -9,9 +9,13 @@
*/
#include <linux/smp.h>
#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
#include <linux/of_address.h>
#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/cputype.h>
+#include <asm/mcpm.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
@@ -87,3 +91,256 @@ struct smp_operations hi3xxx_smp_ops __initdata = {
.cpu_kill = hi3xxx_cpu_kill,
#endif
};
+
+/* bits definition in SC_CPU_RESET_REQ[x]/SC_CPU_RESET_DREQ[x]
+ * 1 -- unreset; 0 -- reset
+ */
+#define CORE_RESET_BIT(x) (1 << x)
+#define NEON_RESET_BIT(x) (1 << (x + 4))
+#define CORE_DEBUG_RESET_BIT(x) (1 << (x + 9))
+#define CLUSTER_L2_RESET_BIT (1 << 8)
+#define CLUSTER_DEBUG_RESET_BIT (1 << 13)
+
+/*
+ * bits definition in SC_CPU_RESET_STATUS[x]
+ * 1 -- reset status; 0 -- unreset status
+ */
+#define CORE_RESET_STATUS(x) (1 << x)
+#define NEON_RESET_STATUS(x) (1 << (x + 4))
+#define CORE_DEBUG_RESET_STATUS(x) (1 << (x + 9))
+#define CLUSTER_L2_RESET_STATUS (1 << 8)
+#define CLUSTER_DEBUG_RESET_STATUS (1 << 13)
+#define CORE_WFI_STATUS(x) (1 << (x + 16))
+#define CORE_WFE_STATUS(x) (1 << (x + 20))
+#define CORE_DEBUG_ACK(x) (1 << (x + 24))
+
+#define SC_CPU_RESET_REQ(x) (0x520 + (x << 3)) /* reset */
+#define SC_CPU_RESET_DREQ(x) (0x524 + (x << 3)) /* unreset */
+#define SC_CPU_RESET_STATUS(x) (0x1520 + (x << 3))
+
+#define FAB_SF_MODE 0x0c
+#define FAB_SF_INVLD 0x10
+
+/* bits definition in FB_SF_INVLD */
+#define FB_SF_INVLD_START (1 << 8)
+
+#define HIP04_MAX_CLUSTERS 4
+#define HIP04_MAX_CPUS_PER_CLUSTER 4
+
+static void __iomem *relocation = NULL, *sysctrl = NULL, *fabric = NULL;
+static int hip04_cpu_table[HIP04_MAX_CLUSTERS][HIP04_MAX_CPUS_PER_CLUSTER];
+static DEFINE_SPINLOCK(boot_lock);
+
+static bool hip04_cluster_down(unsigned int cluster)
+{
+ int i;
+
+ for (i = 0; i < HIP04_MAX_CPUS_PER_CLUSTER; i++)
+ if (hip04_cpu_table[cluster][i])
+ return false;
+ return true;
+}
+
+static void hip04_set_snoop_filter(unsigned int cluster, unsigned int on)
+{
+ unsigned long data;
+
+ if (!fabric)
+ return;
+ data = readl_relaxed(fabric + FAB_SF_MODE);
+ if (on)
+ data |= 1 << cluster;
+ else
+ data &= ~(1 << cluster);
+ writel_relaxed(data, fabric + FAB_SF_MODE);
+ while (1) {
+ if (data == readl_relaxed(fabric + FAB_SF_MODE))
+ break;
+ }
+}
+
+static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster)
+{
+ unsigned long data, mask;
+
+ if (!relocation || !sysctrl)
+ return -ENODEV;
+ if (cluster >= HIP04_MAX_CLUSTERS || cpu >= HIP04_MAX_CPUS_PER_CLUSTER)
+ return -EINVAL;
+
+ spin_lock(&boot_lock);
+ writel_relaxed(HIP04_BOOTWRAPPER_PHYS, relocation);
+ writel_relaxed(HIP04_BOOTWRAPPER_MAGIC, relocation + 4);
+ writel_relaxed(virt_to_phys(mcpm_entry_point), relocation + 8);
+ writel_relaxed(0, relocation + 12);
+
+ if (hip04_cluster_down(cluster)) {
+ data = CLUSTER_L2_RESET_BIT | CLUSTER_DEBUG_RESET_BIT;
+ writel_relaxed(data, sysctrl + SC_CPU_RESET_DREQ(cluster));
+ do {
+ mask = CLUSTER_L2_RESET_STATUS | \
+ CLUSTER_DEBUG_RESET_STATUS;
+ data = readl_relaxed(sysctrl + \
+ SC_CPU_RESET_STATUS(cluster));
+ } while (data & mask);
+ hip04_set_snoop_filter(cluster, 1);
+ }
+
+ hip04_cpu_table[cluster][cpu]++;
+
+ data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \
+ CORE_DEBUG_RESET_BIT(cpu);
+ writel_relaxed(data, sysctrl + SC_CPU_RESET_DREQ(cluster));
+ spin_unlock(&boot_lock);
+
+ return 0;
+}
+
+static void hip04_mcpm_power_down(void)
+{
+ unsigned int mpidr, cpu, cluster;
+ unsigned int v;
+
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ local_irq_disable();
+ gic_cpu_if_down();
+
+ __mcpm_cpu_down(cpu, cluster);
+
+ asm volatile(
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "Ir" (CR_C)
+ : "cc");
+
+ flush_cache_louis();
+
+ asm volatile(
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (0x40)
+ : "cc");
+
+ isb();
+ dsb();
+}
+
+static int hip04_mcpm_power_down_finish(unsigned int cpu, unsigned int cluster)
+{
+ int ret = -EBUSY;
+
+ spin_lock(&boot_lock);
+ BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+ __mcpm_cpu_going_down(cpu, cluster);
+
+ hip04_cpu_table[cluster][cpu]--;
+ if (hip04_cpu_table[cluster][cpu]) {
+ pr_err("Cluster %d CPU%d is still running\n", cluster, cpu);
+ goto out;
+ }
+ ret = 0;
+out:
+ spin_unlock(&boot_lock);
+ return ret;
+}
+
+static void hip04_mcpm_powered_up(void)
+{
+ if (!relocation)
+ return;
+ spin_lock(&boot_lock);
+ writel_relaxed(0, relocation);
+ writel_relaxed(0, relocation + 4);
+ writel_relaxed(0, relocation + 8);
+ writel_relaxed(0, relocation + 12);
+ spin_unlock(&boot_lock);
+}
+
+static const struct mcpm_platform_ops hip04_mcpm_ops = {
+ .power_up = hip04_mcpm_power_up,
+ .power_down = hip04_mcpm_power_down,
+ .power_down_finish = hip04_mcpm_power_down_finish,
+ .powered_up = hip04_mcpm_powered_up,
+};
+
+static bool __init hip04_cpu_table_init(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ if (cluster >= HIP04_MAX_CLUSTERS ||
+ cpu >= HIP04_MAX_CPUS_PER_CLUSTER) {
+ pr_err("%s: boot CPU is out of bound!\n", __func__);
+ return false;
+ }
+ hip04_set_snoop_filter(cluster, 1);
+ hip04_cpu_table[cluster][cpu] = 1;
+ return true;
+}
+
+static int __init hip04_mcpm_init(void)
+{
+ struct device_node *np;
+ int ret = -ENODEV;
+
+ np = of_find_compatible_node(NULL, NULL, "hisilicon,hip04-mcpm");
+ if (!np) {
+ pr_err("failed to find hisilicon,hip04-mcpm node\n");
+ goto err;
+ }
+ relocation = of_iomap(np, 0);
+ if (!relocation) {
+ pr_err("failed to get relocation space\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+ sysctrl = of_iomap(np, 1);
+ if (!sysctrl) {
+ pr_err("failed to get sysctrl base\n");
+ ret = -ENOMEM;
+ goto err_sysctrl;
+ }
+ fabric = of_iomap(np, 2);
+ if (!fabric) {
+ pr_err("failed to get fabric base\n");
+ ret = -ENOMEM;
+ goto err_fabric;
+ }
+ if (!hip04_cpu_table_init())
+ return -EINVAL;
+ ret = mcpm_platform_register(&hip04_mcpm_ops);
+ if (!ret) {
+ mcpm_sync_init(NULL);
+ pr_info("HiP04 MCPM initialized\n");
+ }
+ return ret;
+err_fabric:
+ iounmap(sysctrl);
+err_sysctrl:
+ iounmap(relocation);
+err:
+ return ret;
+}
+early_initcall(hip04_mcpm_init);
+
+bool __init hip04_smp_init_ops(void)
+{
+ mcpm_smp_set_ops();
+ return true;
+}
--
1.8.3.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 6/8] ARM: hisi: add hip04 SoC support
2014-04-01 8:03 ` [PATCH v1 6/8] ARM: hisi: add hip04 SoC support Haojian Zhuang
@ 2014-04-04 14:57 ` Kevin Hilman
2014-04-04 15:43 ` Arnd Bergmann
0 siblings, 1 reply; 13+ messages in thread
From: Kevin Hilman @ 2014-04-04 14:57 UTC (permalink / raw)
To: linux-arm-kernel
Haojian Zhuang <haojian.zhuang@linaro.org> writes:
> Hisilicon Hi3xxx is based on Cortex A9 Core. Now HiP04 SoC is based on
> Cortex A15 Core. And HiP04 supports LPAE to support large memory.
>
> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
[...]
> diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
> index da16efd..707abfe 100644
> --- a/arch/arm/mach-hisi/Kconfig
> +++ b/arch/arm/mach-hisi/Kconfig
> @@ -19,6 +19,16 @@ config ARCH_HI3xxx
> help
> Support for Hisilicon Hi36xx/Hi37xx processor family
>
> +config ARCH_HIP04
> + bool "Hisilicon HiP04 Cortex A15 family" if ARCH_MULTI_V7
> + select ARM_LPAE
Presumably this SoC can support non-LPAE also, correct? If so, LPAE
should't be selected here, or else it will force LPAE on in a multi_v7
build also.
Also, please run this patch through scripts/checkpatch.pl and fix the
issues reported there.
Kevin
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1 6/8] ARM: hisi: add hip04 SoC support
2014-04-04 14:57 ` Kevin Hilman
@ 2014-04-04 15:43 ` Arnd Bergmann
2014-04-06 2:01 ` Olof Johansson
0 siblings, 1 reply; 13+ messages in thread
From: Arnd Bergmann @ 2014-04-04 15:43 UTC (permalink / raw)
To: linux-arm-kernel
On Friday 04 April 2014 07:57:36 Kevin Hilman wrote:
> Haojian Zhuang <haojian.zhuang@linaro.org> writes:
>
> > Hisilicon Hi3xxx is based on Cortex A9 Core. Now HiP04 SoC is based on
> > Cortex A15 Core. And HiP04 supports LPAE to support large memory.
> >
> > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
>
> [...]
>
> > diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
> > index da16efd..707abfe 100644
> > --- a/arch/arm/mach-hisi/Kconfig
> > +++ b/arch/arm/mach-hisi/Kconfig
> > @@ -19,6 +19,16 @@ config ARCH_HI3xxx
> > help
> > Support for Hisilicon Hi36xx/Hi37xx processor family
> >
> > +config ARCH_HIP04
> > + bool "Hisilicon HiP04 Cortex A15 family" if ARCH_MULTI_V7
> > + select ARM_LPAE
>
> Presumably this SoC can support non-LPAE also, correct? If so, LPAE
> should't be selected here, or else it will force LPAE on in a multi_v7
> build also.
Actually even if it doesn't support non-LPAE, using "select" is still
wrong for the same reason.
I think we should actually extend the CPU selection phase for multiplatform,
so we have separate symbols for ARCH_MULTI_V7 (non-LPAE) and
ARCH_MULTI_V7_LPAE. These would still be selectable at the same time,
but you should only be able to turn on CONFIG_LPAE if ARCH_MULTI_V7
is disabled.
A platform that cannot run without LPAE conversely would have to depend
on (ARCH_MULTI_V7_LPAE && !ARCH_MULTI_V7 && !ARCH_MULTI_V6). Once it
does this, it can 'select LPAE' without breaking other platforms.
Arnd
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1 6/8] ARM: hisi: add hip04 SoC support
2014-04-04 15:43 ` Arnd Bergmann
@ 2014-04-06 2:01 ` Olof Johansson
2014-04-06 18:27 ` Arnd Bergmann
0 siblings, 1 reply; 13+ messages in thread
From: Olof Johansson @ 2014-04-06 2:01 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Apr 4, 2014 at 8:43 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Friday 04 April 2014 07:57:36 Kevin Hilman wrote:
>> Haojian Zhuang <haojian.zhuang@linaro.org> writes:
>>
>> > Hisilicon Hi3xxx is based on Cortex A9 Core. Now HiP04 SoC is based on
>> > Cortex A15 Core. And HiP04 supports LPAE to support large memory.
>> >
>> > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
>>
>> [...]
>>
>> > diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
>> > index da16efd..707abfe 100644
>> > --- a/arch/arm/mach-hisi/Kconfig
>> > +++ b/arch/arm/mach-hisi/Kconfig
>> > @@ -19,6 +19,16 @@ config ARCH_HI3xxx
>> > help
>> > Support for Hisilicon Hi36xx/Hi37xx processor family
>> >
>> > +config ARCH_HIP04
>> > + bool "Hisilicon HiP04 Cortex A15 family" if ARCH_MULTI_V7
>> > + select ARM_LPAE
>>
>> Presumably this SoC can support non-LPAE also, correct? If so, LPAE
>> should't be selected here, or else it will force LPAE on in a multi_v7
>> build also.
>
> Actually even if it doesn't support non-LPAE, using "select" is still
> wrong for the same reason.
>
> I think we should actually extend the CPU selection phase for multiplatform,
> so we have separate symbols for ARCH_MULTI_V7 (non-LPAE) and
> ARCH_MULTI_V7_LPAE. These would still be selectable at the same time,
> but you should only be able to turn on CONFIG_LPAE if ARCH_MULTI_V7
> is disabled.
>
> A platform that cannot run without LPAE conversely would have to depend
> on (ARCH_MULTI_V7_LPAE && !ARCH_MULTI_V7 && !ARCH_MULTI_V6). Once it
> does this, it can 'select LPAE' without breaking other platforms.
Why not just have it depend on ARCH_MULTI_V7 && LPAE? LPAE shouldn't
be possible to enable if MULTI_V6 is enabled.
So, you'd have:
MULTI_V6
MULTI_V6 + V7
MULTI_V7 + LPAE
as valid options.
We'd need to annotate existing non-LPAE platforms with depends on
!LPAE, but that shouldn't be a big deal.
And, we should probably change the multi defconfigs to be:
multi_v6_v7_defconfig which contains what v7_defconfig does today,
plus the v6 platforms
multi_lpae_defconfig which contains only v7+lpae platforms (and would
enable kvm, etc).
-Olof
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1 6/8] ARM: hisi: add hip04 SoC support
2014-04-06 2:01 ` Olof Johansson
@ 2014-04-06 18:27 ` Arnd Bergmann
0 siblings, 0 replies; 13+ messages in thread
From: Arnd Bergmann @ 2014-04-06 18:27 UTC (permalink / raw)
To: linux-arm-kernel
On Saturday 05 April 2014 19:01:16 Olof Johansson wrote:
> On Fri, Apr 4, 2014 at 8:43 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> > I think we should actually extend the CPU selection phase for multiplatform,
> > so we have separate symbols for ARCH_MULTI_V7 (non-LPAE) and
> > ARCH_MULTI_V7_LPAE. These would still be selectable at the same time,
> > but you should only be able to turn on CONFIG_LPAE if ARCH_MULTI_V7
> > is disabled.
> >
> > A platform that cannot run without LPAE conversely would have to depend
> > on (ARCH_MULTI_V7_LPAE && !ARCH_MULTI_V7 && !ARCH_MULTI_V6). Once it
> > does this, it can 'select LPAE' without breaking other platforms.
>
> Why not just have it depend on ARCH_MULTI_V7 && LPAE? LPAE shouldn't
> be possible to enable if MULTI_V6 is enabled.
>
> So, you'd have:
>
> MULTI_V6
> MULTI_V6 + V7
> MULTI_V7 + LPAE
>
> as valid options.
>
> We'd need to annotate existing non-LPAE platforms with depends on
> !LPAE, but that shouldn't be a big deal.
That would work, too. It really depends on how we treat global
options like MMU, SMP, LPAE, SPARSEMEM, etc in combination with
multiplatform kernels. At the moment we are rather inconsistent,
and so far I have always thought we should have them ordered in
the Kconfig menu in the same way as the dependency flow:
1. Pick a platform type (normally ARCH_MULTIPLATFORM)
2. (if ARCH_MULTIPLATFORM), pick architecture level(s): V4, V4T, V5, V6,
V6K, V6K+SMP, V7, V7+LPAE, V7-M. We may decide to skip some of these.
3. Pick global features that are allowed based on 1. and 2.:
MMU, SMP, LPAE, SPARSEMEM
4. (again, if MULTIPLATFORM) Pick SoC families, based on 1. and 2.
5. (if necessary) Pick boards.
I'd like to keep steps 3 and 4 independent of one another, possibly
doing them in the opposite order.
An idea I just had was to essentially always imply compatibility
to later architectures where possible, e.g. selecting v4 would always
enable v4t and v5, and selecting v6k would always enable support for
v6+smp, v7 and v7+lpae, but not to v6. If we do this, the matrix
of possible combinations becomes much simpler, and for all I can tell
we only lose the ones that are not interesting anyway. The cost
of enabling support for a later architecture level is usually much
lower than the cost for enabling an earlier level.
The architecture level selection at that point becomes a simple
'choice' statement, rather than the complex logic I introduced
for multiplatform initially. It would also simplify adding new
levels for v7-m and v7-r.
> And, we should probably change the multi defconfigs to be:
>
> multi_v6_v7_defconfig which contains what v7_defconfig does today,
> plus the v6 platforms
> multi_lpae_defconfig which contains only v7+lpae platforms (and would
> enable kvm, etc).
I like this part.
Arnd
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1 7/8] ARM: dts: add hip04-d01 dts file
2014-04-01 8:03 [PATCH v1 0/8] support Hisilicon HiP04 Haojian Zhuang
` (5 preceding siblings ...)
2014-04-01 8:03 ` [PATCH v1 6/8] ARM: hisi: add hip04 SoC support Haojian Zhuang
@ 2014-04-01 8:03 ` Haojian Zhuang
2014-04-01 8:03 ` [PATCH v1 8/8] ARM: config: append hip04_defconfig Haojian Zhuang
7 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2014-04-01 8:03 UTC (permalink / raw)
To: linux-arm-kernel
Add hip04.dtsi & hip04-d01.dts file to support HiP04 SoC platform.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/hip04-d01.dts | 74 +++++++++++++
arch/arm/boot/dts/hip04.dtsi | 240 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 315 insertions(+)
create mode 100644 arch/arm/boot/dts/hip04-d01.dts
create mode 100644 arch/arm/boot/dts/hip04.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8f68a0a..e02ad21 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
+dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
new file mode 100644
index 0000000..a10dcf3
--- /dev/null
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "hip04.dtsi"
+
+/ {
+ /* memory bus is 64-bit */
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "Hisilicon D01 Development Board";
+ compatible = "hisilicon,hip04-d01";
+
+ memory at 0 {
+ device_type = "memory";
+ /*
+ * Bootloader loads kernel image into 0x1000_0000 region,
+ * so disables the region between [0000_0000 - 1000_0000]
+ * temporarily.
+ * Because the PHYS_TO_VIRT_OFFSET is calculated based on
+ * the original region that kenrel is loaded.
+ * This workaround will be removed only after UEFI updated.
+ */
+ reg = <0x00000000 0x10000000 0xc0000000>;
+ };
+
+ memory at 00000004c0000000 {
+ device_type = "memory";
+ reg = <0x00000004 0xc0000000 0x40000000>;
+ };
+
+ memory at 0000000500000000 {
+ device_type = "memory";
+ reg = <0x00000005 0x00000000 0x80000000>;
+ };
+
+ memory at 0000000580000000 {
+ device_type = "memory";
+ reg = <0x00000005 0x80000000 0x80000000>;
+ };
+
+ memory at 0000000600000000 {
+ device_type = "memory";
+ reg = <0x00000006 0x00000000 0x80000000>;
+ };
+
+ memory at 0000000680000000 {
+ device_type = "memory";
+ reg = <0x00000006 0x80000000 0x80000000>;
+ };
+
+ memory at 0000000700000000 {
+ device_type = "memory";
+ reg = <0x00000007 0x00000000 0x80000000>;
+ };
+
+ memory at 0000000780000000 {
+ device_type = "memory";
+ reg = <0x00000007 0x80000000 0x80000000>;
+ };
+
+ soc {
+ uart0: uart at 4007000 {
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
new file mode 100644
index 0000000..eb5e5a2
--- /dev/null
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -0,0 +1,240 @@
+/*
+ * Hisilicon Ltd. HiP01 SoC
+ *
+ * Copyright (C) 2013-2014 Hisilicon Ltd.
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/hip04-clock.h>
+
+/ {
+ /* memory bus is 64-bit */
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+ core1 {
+ cpu = <&CPU5>;
+ };
+ core2 {
+ cpu = <&CPU6>;
+ };
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ cluster2 {
+ core0 {
+ cpu = <&CPU8>;
+ };
+ core1 {
+ cpu = <&CPU9>;
+ };
+ core2 {
+ cpu = <&CPU10>;
+ };
+ core3 {
+ cpu = <&CPU11>;
+ };
+ };
+ cluster3 {
+ core0 {
+ cpu = <&CPU12>;
+ };
+ core1 {
+ cpu = <&CPU13>;
+ };
+ core2 {
+ cpu = <&CPU14>;
+ };
+ core3 {
+ cpu = <&CPU15>;
+ };
+ };
+ };
+ CPU0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ };
+ CPU1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ };
+ CPU2: cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <2>;
+ };
+ CPU3: cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <3>;
+ };
+ CPU4: cpu at 100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x100>;
+ clock-frequency = <1350000000>;
+ };
+ CPU5: cpu at 101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x101>;
+ clock-frequency = <1350000000>;
+ };
+ CPU6: cpu at 102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x102>;
+ clock-frequency = <1350000000>;
+ };
+ CPU7: cpu at 103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x103>;
+ clock-frequency = <1350000000>;
+ };
+ CPU8: cpu at 200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x200>;
+ clock-frequency = <1350000000>;
+ };
+ CPU9: cpu at 201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x201>;
+ clock-frequency = <1350000000>;
+ };
+ CPU10: cpu at 202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x202>;
+ clock-frequency = <1350000000>;
+ };
+ CPU11: cpu at 203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x203>;
+ clock-frequency = <1350000000>;
+ };
+ CPU12: cpu at 300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x300>;
+ clock-frequency = <1350000000>;
+ };
+ CPU13: cpu at 301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x301>;
+ clock-frequency = <1350000000>;
+ };
+ CPU14: cpu at 302 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x302>;
+ clock-frequency = <1350000000>;
+ };
+ CPU15: cpu at 303 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x303>;
+ clock-frequency = <1350000000>;
+ };
+ };
+
+ soc {
+ /* It's a 32-bit SoC. */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus", "simple-bus";
+ device_type = "soc";
+ interrupt-parent = <&gic>;
+ ranges = <0 0 0xe0000000 0x10000000>;
+
+ gic: interrupt-controller at c01000 {
+ compatible = "hisilicon,hip04-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+
+ /* gic dist base, gic cpu base */
+ reg = <0xc01000 0x1000>, <0xc02000 0x1000>;
+ };
+
+ mcpm: mcpm {
+ compatible = "hisilicon,hip04-mcpm";
+ reg = <0x100 0x1000>, <0x3e00000 0x00100000>,
+ <0x302a000 0x1000>;
+ };
+
+ clock: clock {
+ compatible = "hisilicon,hip04-clock";
+ /* FIXME: the base of clock controller */
+ reg = <0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ dual_timer0: dual_timer at 3000000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x3000000 0x1000>;
+ interrupts = <0 224 4>;
+ clocks = <&clock HIP04_CLK_50M>;
+ clock-names = "apb_pclk";
+ status = "ok";
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
+ uart0: uart at 4007000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x4007000 0x1000>;
+ interrupts = <0 381 4>;
+ clocks = <&clock HIP04_CLK_168M>;
+ clock-names = "uartclk";
+ reg-shift = <2>;
+ status = "disabled";
+ };
+ };
+};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 8/8] ARM: config: append hip04_defconfig
2014-04-01 8:03 [PATCH v1 0/8] support Hisilicon HiP04 Haojian Zhuang
` (6 preceding siblings ...)
2014-04-01 8:03 ` [PATCH v1 7/8] ARM: dts: add hip04-d01 dts file Haojian Zhuang
@ 2014-04-01 8:03 ` Haojian Zhuang
7 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2014-04-01 8:03 UTC (permalink / raw)
To: linux-arm-kernel
Select HiP04 SoC configuration by hip04_defconfig.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/configs/hip04_defconfig | 64 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
create mode 100644 arch/arm/configs/hip04_defconfig
diff --git a/arch/arm/configs/hip04_defconfig b/arch/arm/configs/hip04_defconfig
new file mode 100644
index 0000000..5222547
--- /dev/null
+++ b/arch/arm/configs/hip04_defconfig
@@ -0,0 +1,64 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_GZIP=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_HIP04=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_HIGHMEM=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_DRM=y
+CONFIG_FB_SIMPLE=y
+CONFIG_RTC_CLASS=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_UART_8250=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_DEBUG_USER=y
--
1.8.3.2
^ permalink raw reply related [flat|nested] 13+ messages in thread