* [PATCH 1/3] ARM: dts: imx27-pdk: Pass the memory range
@ 2014-04-02 22:25 Fabio Estevam
2014-04-02 22:25 ` [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration Fabio Estevam
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Fabio Estevam @ 2014-04-02 22:25 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
imx27-pdk has 128 MB of DRAM. Pass the memory range in dt.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/boot/dts/imx27-pdk.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 5ce89aa..28c83bc 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -17,7 +17,7 @@
compatible = "fsl,imx27-pdk", "fsl,imx27";
memory {
- reg = <0x0 0x0>;
+ reg = <0xa0000000 0x08000000>;
};
};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration
2014-04-02 22:25 [PATCH 1/3] ARM: dts: imx27-pdk: Pass the memory range Fabio Estevam
@ 2014-04-02 22:25 ` Fabio Estevam
2014-04-03 2:01 ` Shawn Guo
2014-04-02 22:25 ` [PATCH 3/3] ARM: dts: imx27-pdk: Pass the FEC " Fabio Estevam
2014-04-03 2:02 ` [PATCH 1/3] ARM: dts: imx27-pdk: Pass the memory range Shawn Guo
2 siblings, 1 reply; 7+ messages in thread
From: Fabio Estevam @ 2014-04-02 22:25 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
Provide an entry for the UART1 pin muxing.
While at it, sort the dt entries.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/boot/dts/imx27-pdk.dts | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 28c83bc..5e9a4bb 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -21,11 +21,27 @@
};
};
-&uart1 {
- fsl,uart-has-rtscts;
+&fec {
status = "okay";
};
-&fec {
+
+&iomuxc {
+ imx27-pdk {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
+ };
+};
+
+&uart1 {
+ fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/3] ARM: dts: imx27-pdk: Pass the FEC pin configuration
2014-04-02 22:25 [PATCH 1/3] ARM: dts: imx27-pdk: Pass the memory range Fabio Estevam
2014-04-02 22:25 ` [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration Fabio Estevam
@ 2014-04-02 22:25 ` Fabio Estevam
2014-04-03 2:02 ` [PATCH 1/3] ARM: dts: imx27-pdk: Pass the memory range Shawn Guo
2 siblings, 0 replies; 7+ messages in thread
From: Fabio Estevam @ 2014-04-02 22:25 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
Provide an entry for the FEC pin muxing.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/boot/dts/imx27-pdk.dts | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 5e9a4bb..f10d4ea 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -22,12 +22,37 @@
};
&fec {
+ phy-mode = "mii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
status = "okay";
};
-
&iomuxc {
imx27-pdk {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX27_PAD_UART1_TXD__UART1_TXD 0x0
--
1.8.3.2
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration
2014-04-02 22:25 ` [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration Fabio Estevam
@ 2014-04-03 2:01 ` Shawn Guo
2014-04-09 3:37 ` Fabio Estevam
0 siblings, 1 reply; 7+ messages in thread
From: Shawn Guo @ 2014-04-03 2:01 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Apr 02, 2014 at 07:25:45PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> Provide an entry for the UART1 pin muxing.
>
> While at it, sort the dt entries.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> arch/arm/boot/dts/imx27-pdk.dts | 22 +++++++++++++++++++---
> 1 file changed, 19 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
> index 28c83bc..5e9a4bb 100644
> --- a/arch/arm/boot/dts/imx27-pdk.dts
> +++ b/arch/arm/boot/dts/imx27-pdk.dts
> @@ -21,11 +21,27 @@
> };
> };
>
> -&uart1 {
> - fsl,uart-has-rtscts;
> +&fec {
> status = "okay";
> };
>
> -&fec {
> +
> +&iomuxc {
The iomuxc node in board dts is a little special now, and it will have a
lot more data than others. I like Alexander's idea to put it at the
bottom of the file to make it easier for users to check board level
settings of other device nodes. So I would suggest that way for the new
added iomuxc node in board dts.
Shawn
> + imx27-pdk {
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX27_PAD_UART1_TXD__UART1_TXD 0x0
> + MX27_PAD_UART1_RXD__UART1_RXD 0x0
> + MX27_PAD_UART1_CTS__UART1_CTS 0x0
> + MX27_PAD_UART1_RTS__UART1_RTS 0x0
> + >;
> + };
> + };
> +};
> +
> +&uart1 {
> + fsl,uart-has-rtscts;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> status = "okay";
> };
> --
> 1.8.3.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/3] ARM: dts: imx27-pdk: Pass the memory range
2014-04-02 22:25 [PATCH 1/3] ARM: dts: imx27-pdk: Pass the memory range Fabio Estevam
2014-04-02 22:25 ` [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration Fabio Estevam
2014-04-02 22:25 ` [PATCH 3/3] ARM: dts: imx27-pdk: Pass the FEC " Fabio Estevam
@ 2014-04-03 2:02 ` Shawn Guo
2 siblings, 0 replies; 7+ messages in thread
From: Shawn Guo @ 2014-04-03 2:02 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Apr 02, 2014 at 07:25:44PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> imx27-pdk has 128 MB of DRAM. Pass the memory range in dt.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration
2014-04-03 2:01 ` Shawn Guo
@ 2014-04-09 3:37 ` Fabio Estevam
2014-04-09 3:44 ` Shawn Guo
0 siblings, 1 reply; 7+ messages in thread
From: Fabio Estevam @ 2014-04-09 3:37 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Apr 2, 2014 at 11:01 PM, Shawn Guo <shawn.guo@freescale.com> wrote:
> The iomuxc node in board dts is a little special now, and it will have a
> lot more data than others. I like Alexander's idea to put it at the
> bottom of the file to make it easier for users to check board level
> settings of other device nodes. So I would suggest that way for the new
> added iomuxc node in board dts.
Could you please point me Alexander's patch for reference? I was not
able to locate it.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration
2014-04-09 3:37 ` Fabio Estevam
@ 2014-04-09 3:44 ` Shawn Guo
0 siblings, 0 replies; 7+ messages in thread
From: Shawn Guo @ 2014-04-09 3:44 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Apr 09, 2014 at 12:37:27AM -0300, Fabio Estevam wrote:
> On Wed, Apr 2, 2014 at 11:01 PM, Shawn Guo <shawn.guo@freescale.com> wrote:
>
> > The iomuxc node in board dts is a little special now, and it will have a
> > lot more data than others. I like Alexander's idea to put it at the
> > bottom of the file to make it easier for users to check board level
> > settings of other device nodes. So I would suggest that way for the new
> > added iomuxc node in board dts.
>
> Could you please point me Alexander's patch for reference? I was not
> able to locate it.
http://www.spinics.net/lists/arm-kernel/msg318968.html
Shawn
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2014-04-09 3:44 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-04-02 22:25 [PATCH 1/3] ARM: dts: imx27-pdk: Pass the memory range Fabio Estevam
2014-04-02 22:25 ` [PATCH 2/3] ARM: dts: imx27-pdk: Pass the UART1 pin configuration Fabio Estevam
2014-04-03 2:01 ` Shawn Guo
2014-04-09 3:37 ` Fabio Estevam
2014-04-09 3:44 ` Shawn Guo
2014-04-02 22:25 ` [PATCH 3/3] ARM: dts: imx27-pdk: Pass the FEC " Fabio Estevam
2014-04-03 2:02 ` [PATCH 1/3] ARM: dts: imx27-pdk: Pass the memory range Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.