* [U-Boot] [PATCH 1/2] ARM: highbank: use config_distro_defaults.h
@ 2014-04-10 21:17 Rob Herring
2014-04-10 21:17 ` [U-Boot] [PATCH 2/2] ARM: highbank: use default prompt Rob Herring
2014-05-02 13:09 ` [U-Boot] [PATCH 1/2] ARM: highbank: use config_distro_defaults.h Albert ARIBAUD
0 siblings, 2 replies; 4+ messages in thread
From: Rob Herring @ 2014-04-10 21:17 UTC (permalink / raw)
To: u-boot
From: Rob Herring <robh@kernel.org>
Adapt highbank to use config_distro_defaults.h and remove the redundant
defines.
Signed-off-by: Rob Herring <robh@kernel.org>
---
include/configs/highbank.h | 25 ++-----------------------
1 file changed, 2 insertions(+), 23 deletions(-)
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 7dbee3c..f8794dc 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -7,15 +7,15 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <config_distro_defaults.h>
+
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_FIT
-#define CONFIG_SUPPORT_RAW_INITRD
#define CONFIG_SYS_BOOTMAPSZ (16 << 20)
#define CONFIG_SYS_TIMER_RATE (150000000/256)
@@ -48,35 +48,18 @@
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-
#define CONFIG_CALXEDA_XGMAC
-/* PXE support */
-#define CONFIG_BOOTP_PXE
-#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
-#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.highbank"
-
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_LOADS
#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_RESET_TO_RETRY
#define CONFIG_AUTOBOOT_KEYED
@@ -85,14 +68,10 @@
/*
* Miscellaneous configurable options
*/
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_PROMPT "Highbank #"
-#define CONFIG_SYS_HUSH_PARSER
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT)+16)
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 2/2] ARM: highbank: use default prompt
2014-04-10 21:17 [U-Boot] [PATCH 1/2] ARM: highbank: use config_distro_defaults.h Rob Herring
@ 2014-04-10 21:17 ` Rob Herring
2014-05-02 13:09 ` Albert ARIBAUD
2014-05-02 13:09 ` [U-Boot] [PATCH 1/2] ARM: highbank: use config_distro_defaults.h Albert ARIBAUD
1 sibling, 1 reply; 4+ messages in thread
From: Rob Herring @ 2014-04-10 21:17 UTC (permalink / raw)
To: u-boot
From: Rob Herring <robh@kernel.org>
Since highbank is actually shared between Highbank and Midway platforms,
remove the Highbank name from the prompt and use the default.
Signed-off-by: Rob Herring <robh@kernel.org>
---
include/configs/highbank.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index f8794dc..a6202cf 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -71,7 +71,6 @@
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PROMPT "Highbank #"
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT)+16)
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 1/2] ARM: highbank: use config_distro_defaults.h
2014-04-10 21:17 [U-Boot] [PATCH 1/2] ARM: highbank: use config_distro_defaults.h Rob Herring
2014-04-10 21:17 ` [U-Boot] [PATCH 2/2] ARM: highbank: use default prompt Rob Herring
@ 2014-05-02 13:09 ` Albert ARIBAUD
1 sibling, 0 replies; 4+ messages in thread
From: Albert ARIBAUD @ 2014-05-02 13:09 UTC (permalink / raw)
To: u-boot
Hi Rob,
On Thu, 10 Apr 2014 16:17:30 -0500, Rob Herring <robherring2@gmail.com>
wrote:
> From: Rob Herring <robh@kernel.org>
>
> Adapt highbank to use config_distro_defaults.h and remove the redundant
> defines.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> include/configs/highbank.h | 25 ++-----------------------
> 1 file changed, 2 insertions(+), 23 deletions(-)
>
> diff --git a/include/configs/highbank.h b/include/configs/highbank.h
> index 7dbee3c..f8794dc 100644
> --- a/include/configs/highbank.h
> +++ b/include/configs/highbank.h
> @@ -7,15 +7,15 @@
> #ifndef __CONFIG_H
> #define __CONFIG_H
>
> +#include <config_distro_defaults.h>
> +
> #define CONFIG_SYS_DCACHE_OFF
> #define CONFIG_SYS_THUMB_BUILD
>
> #define CONFIG_SYS_NO_FLASH
>
> -#define CONFIG_OF_LIBFDT
> #define CONFIG_OF_BOARD_SETUP
> #define CONFIG_FIT
> -#define CONFIG_SUPPORT_RAW_INITRD
> #define CONFIG_SYS_BOOTMAPSZ (16 << 20)
>
> #define CONFIG_SYS_TIMER_RATE (150000000/256)
> @@ -48,35 +48,18 @@
> #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
> CONFIG_SYS_SCSI_MAX_LUN)
>
> -#define CONFIG_DOS_PARTITION
> -#define CONFIG_EFI_PARTITION
> -
> #define CONFIG_CALXEDA_XGMAC
>
> -/* PXE support */
> -#define CONFIG_BOOTP_PXE
> -#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
> -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.highbank"
> -
> /*
> * Command line configuration.
> */
> #include <config_cmd_default.h>
>
> #define CONFIG_CMD_BDI
> -#define CONFIG_CMD_BOOTZ
> -#define CONFIG_CMD_DHCP
> -#define CONFIG_CMD_ELF
> #define CONFIG_CMD_MEMORY
> #define CONFIG_CMD_LOADS
> #define CONFIG_CMD_SCSI
> -#define CONFIG_CMD_EXT2
> -#define CONFIG_CMD_EXT4
> -#define CONFIG_CMD_FAT
> -#define CONFIG_CMD_PXE
> -#define CONFIG_MENU
>
> -#define CONFIG_BOOTDELAY 2
> #define CONFIG_BOOT_RETRY_TIME -1
> #define CONFIG_RESET_TO_RETRY
> #define CONFIG_AUTOBOOT_KEYED
> @@ -85,14 +68,10 @@
> /*
> * Miscellaneous configurable options
> */
> -#define CONFIG_CMDLINE_EDITING
> -#define CONFIG_AUTO_COMPLETE
> -#define CONFIG_SYS_LONGHELP /* undef to save memory */
> #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
> #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
> #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
> #define CONFIG_SYS_PROMPT "Highbank #"
> -#define CONFIG_SYS_HUSH_PARSER
> /* Print Buffer Size */
> #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> sizeof(CONFIG_SYS_PROMPT)+16)
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH 2/2] ARM: highbank: use default prompt
2014-04-10 21:17 ` [U-Boot] [PATCH 2/2] ARM: highbank: use default prompt Rob Herring
@ 2014-05-02 13:09 ` Albert ARIBAUD
0 siblings, 0 replies; 4+ messages in thread
From: Albert ARIBAUD @ 2014-05-02 13:09 UTC (permalink / raw)
To: u-boot
Hi Rob,
On Thu, 10 Apr 2014 16:17:31 -0500, Rob Herring <robherring2@gmail.com>
wrote:
> From: Rob Herring <robh@kernel.org>
>
> Since highbank is actually shared between Highbank and Midway platforms,
> remove the Highbank name from the prompt and use the default.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> include/configs/highbank.h | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/include/configs/highbank.h b/include/configs/highbank.h
> index f8794dc..a6202cf 100644
> --- a/include/configs/highbank.h
> +++ b/include/configs/highbank.h
> @@ -71,7 +71,6 @@
> #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
> #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
> #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
> -#define CONFIG_SYS_PROMPT "Highbank #"
> /* Print Buffer Size */
> #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> sizeof(CONFIG_SYS_PROMPT)+16)
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-05-02 13:09 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-04-10 21:17 [U-Boot] [PATCH 1/2] ARM: highbank: use config_distro_defaults.h Rob Herring
2014-04-10 21:17 ` [U-Boot] [PATCH 2/2] ARM: highbank: use default prompt Rob Herring
2014-05-02 13:09 ` Albert ARIBAUD
2014-05-02 13:09 ` [U-Boot] [PATCH 1/2] ARM: highbank: use config_distro_defaults.h Albert ARIBAUD
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.