All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Antoine Ténart" <antoine.tenart@free-electrons.com>
To: sebastian.hesselbarth@gmail.com
Cc: "Antoine Ténart" <antoine.tenart@free-electrons.com>,
	alexandre.belloni@free-electrons.com, zmxu@marvell.com,
	jszhang@marvell.com, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] ARM: dts: berlin: add the SDHCI nodes for the BG2Q
Date: Tue, 22 Apr 2014 10:27:27 +0200	[thread overview]
Message-ID: <1398155248-1659-2-git-send-email-antoine.tenart@free-electrons.com> (raw)
In-Reply-To: <1398155248-1659-1-git-send-email-antoine.tenart@free-electrons.com>

Add the SDHCI nodes for the Marvell Berlin BG2Q, using the mrvl,pxav3-mmc
driver.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
 arch/arm/boot/dts/berlin2q.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 5925e6a16749..85d0ca5cc47a 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -67,6 +67,14 @@
 		clock-div = <3>;
 	};
 
+	sdio1clk: sdio1clk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&syspll>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -75,6 +83,30 @@
 		ranges = <0 0xf7000000 0x1000000>;
 		interrupt-parent = <&gic>;
 
+		sdhci0: sdhci@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&sdio1clk>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@ab0800 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0800 0x200>;
+			clocks = <&sdio1clk>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@ab1000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab1000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdio1clk>;
+			status = "disabled";
+		};
+
 		l2: l2-cache-controller@ac0000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xac0000 0x1000>;
-- 
1.8.3.2


WARNING: multiple messages have this Message-ID (diff)
From: antoine.tenart@free-electrons.com (Antoine Ténart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] ARM: dts: berlin: add the SDHCI nodes for the BG2Q
Date: Tue, 22 Apr 2014 10:27:27 +0200	[thread overview]
Message-ID: <1398155248-1659-2-git-send-email-antoine.tenart@free-electrons.com> (raw)
In-Reply-To: <1398155248-1659-1-git-send-email-antoine.tenart@free-electrons.com>

Add the SDHCI nodes for the Marvell Berlin BG2Q, using the mrvl,pxav3-mmc
driver.

Signed-off-by: Antoine T?nart <antoine.tenart@free-electrons.com>
---
 arch/arm/boot/dts/berlin2q.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 5925e6a16749..85d0ca5cc47a 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -67,6 +67,14 @@
 		clock-div = <3>;
 	};
 
+	sdio1clk: sdio1clk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&syspll>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -75,6 +83,30 @@
 		ranges = <0 0xf7000000 0x1000000>;
 		interrupt-parent = <&gic>;
 
+		sdhci0: sdhci at ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&sdio1clk>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci at ab0800 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0800 0x200>;
+			clocks = <&sdio1clk>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci at ab1000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab1000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sdio1clk>;
+			status = "disabled";
+		};
+
 		l2: l2-cache-controller at ac0000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xac0000 0x1000>;
-- 
1.8.3.2

  reply	other threads:[~2014-04-22  8:27 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-22  8:27 [PATCH v2 0/2] ARM: berlin: add SDHCI support Antoine Ténart
2014-04-22  8:27 ` Antoine Ténart
2014-04-22  8:27 ` Antoine Ténart
2014-04-22  8:27 ` Antoine Ténart [this message]
2014-04-22  8:27   ` [PATCH v2 1/2] ARM: dts: berlin: add the SDHCI nodes for the BG2Q Antoine Ténart
2014-04-22 17:35   ` Sebastian Hesselbarth
2014-04-22 17:35     ` Sebastian Hesselbarth
2014-04-22 17:35     ` Sebastian Hesselbarth
2014-04-23  9:02     ` Antoine Ténart
2014-04-23  9:02       ` Antoine Ténart
2014-04-23  9:02       ` Antoine Ténart
2014-04-22  8:27 ` [PATCH v2 2/2] ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP Antoine Ténart
2014-04-22  8:27   ` Antoine Ténart
2014-04-23 17:26   ` Sebastian Hesselbarth
2014-04-23 17:26     ` Sebastian Hesselbarth
2014-04-23 17:26     ` Sebastian Hesselbarth
2014-04-23 17:36     ` Antoine Ténart
2014-04-23 17:36       ` Antoine Ténart
2014-04-23 17:43       ` Sebastian Hesselbarth
2014-04-23 17:43         ` Sebastian Hesselbarth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1398155248-1659-2-git-send-email-antoine.tenart@free-electrons.com \
    --to=antoine.tenart@free-electrons.com \
    --cc=alexandre.belloni@free-electrons.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jszhang@marvell.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=zmxu@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.