* [PATCH] kbuild: trivial - remove trailing spaces
@ 2014-04-28 7:26 Masahiro Yamada
2014-04-30 15:36 ` Michal Marek
0 siblings, 1 reply; 2+ messages in thread
From: Masahiro Yamada @ 2014-04-28 7:26 UTC (permalink / raw)
To: linux-kbuild; +Cc: Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
---
Makefile | 8 ++++----
scripts/Makefile.build | 4 ++--
scripts/Makefile.fwinst | 2 +-
scripts/Makefile.host | 2 +-
scripts/Makefile.lib | 10 +++++-----
scripts/conmakehash.c | 12 ++++++------
scripts/kconfig/streamline_config.pl | 2 +-
scripts/mkcompile_h | 4 ++--
scripts/package/builddeb | 2 +-
scripts/patch-kernel | 4 ++--
10 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/Makefile b/Makefile
index 027a0f1..2c4612b 100644
--- a/Makefile
+++ b/Makefile
@@ -162,7 +162,7 @@ export srctree objtree VPATH
# SUBARCH tells the usermode build what the underlying arch is. That is set
# first, and if a usermode build is happening, the "ARCH=um" on the command
# line overrides the setting of ARCH below. If a native build is happening,
-# then ARCH is assigned, getting whatever value it gets normally, and
+# then ARCH is assigned, getting whatever value it gets normally, and
# SUBARCH is subsequently ignored.
SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
@@ -290,7 +290,7 @@ export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
-# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "quiet_", only the short version will be printed.
# If it is set to "silent_", nothing will be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
@@ -869,7 +869,7 @@ ifdef CONFIG_BUILD_DOCSRC
endif
+$(call if_changed,link-vmlinux)
-# The actual objects are generated when descending,
+# The actual objects are generated when descending,
# make sure no implicit rule kicks in
$(sort $(vmlinux-deps)): $(vmlinux-dirs) ;
@@ -1484,7 +1484,7 @@ endif
$(build)=$(build-dir) $(@:.ko=.o)
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-# FIXME Should go into a make.lib or something
+# FIXME Should go into a make.lib or something
# ===========================================================================
quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index b5e02b6..bf3e677 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -281,7 +281,7 @@ $(real-objs-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
$(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
quiet_cmd_as_s_S = CPP $(quiet_modtag) $@
-cmd_as_s_S = $(CPP) $(a_flags) -o $@ $<
+cmd_as_s_S = $(CPP) $(a_flags) -o $@ $<
$(obj)/%.s: $(src)/%.S FORCE
$(call if_changed_dep,as_s_S)
@@ -375,7 +375,7 @@ link_multi_deps = \
$(filter $(addprefix $(obj)/, \
$($(subst $(obj)/,,$(@:.o=-objs))) \
$($(subst $(obj)/,,$(@:.o=-y)))), $^)
-
+
quiet_cmd_link_multi-y = LD $@
cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst
index 4d908d1..2c1d69c 100644
--- a/scripts/Makefile.fwinst
+++ b/scripts/Makefile.fwinst
@@ -18,7 +18,7 @@ include $(srctree)/$(obj)/Makefile
include scripts/Makefile.host
mod-fw := $(fw-shipped-m)
-# If CONFIG_FIRMWARE_IN_KERNEL isn't set, then install the
+# If CONFIG_FIRMWARE_IN_KERNEL isn't set, then install the
# firmware for in-kernel drivers too.
ifndef CONFIG_FIRMWARE_IN_KERNEL
mod-fw += $(fw-shipped-y)
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index 1ac414f..0f0d6ba 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -166,5 +166,5 @@ $(host-cshlib): $(obj)/%: $(host-cshobjs) FORCE
$(call if_changed,host-cshlib)
targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\
- $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs)
+ $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 6a5b0de..260bf8a 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -27,7 +27,7 @@ lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
# ---------------------------------------------------------------------------
# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
# and add the directory to the list of dirs to descend into: $(subdir-y)
-# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
+# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
# and add the directory to the list of dirs to descend into: $(subdir-m)
# Determine modorder.
@@ -46,7 +46,7 @@ obj-m := $(filter-out %/, $(obj-m))
subdir-ym := $(sort $(subdir-y) $(subdir-m))
-# if $(foo-objs) exists, foo.o is a composite object
+# if $(foo-objs) exists, foo.o is a composite object
multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
multi-used := $(multi-used-y) $(multi-used-m)
@@ -91,7 +91,7 @@ obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
# These flags are needed for modversions and compiling, so we define them here
# already
-# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
+# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
# end up in (or would, if it gets compiled in)
# Note: Files that end up in two or more modules are compiled without the
# KBUILD_MODNAME definition. The reason is that any made-up name would
@@ -212,7 +212,7 @@ $(obj)/%: $(src)/%_shipped
# Commands useful for building a boot image
# ===========================================================================
-#
+#
# Use as following:
#
# target: source(s) FORCE
@@ -226,7 +226,7 @@ $(obj)/%: $(src)/%_shipped
quiet_cmd_ld = LD $@
cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
- $(filter-out FORCE,$^) -o $@
+ $(filter-out FORCE,$^) -o $@
# Objcopy
# ---------------------------------------------------------------------------
diff --git a/scripts/conmakehash.c b/scripts/conmakehash.c
index 263a44d..61bbda5 100644
--- a/scripts/conmakehash.c
+++ b/scripts/conmakehash.c
@@ -104,7 +104,7 @@ int main(int argc, char *argv[])
}
}
- /* For now we assume the default font is always 256 characters. */
+ /* For now we assume the default font is always 256 characters. */
fontlen = 256;
/* Initialize table */
@@ -236,15 +236,15 @@ int main(int argc, char *argv[])
}
/* Okay, we hit EOF, now output hash table */
-
+
fclose(ctbl);
-
+
/* Compute total size of Unicode list */
nuni = 0;
for ( i = 0 ; i < fontlen ; i++ )
nuni += unicount[i];
-
+
printf("\
/*\n\
* Do not edit this file; it was automatically generated by\n\
@@ -268,9 +268,9 @@ u8 dfont_unicount[%d] = \n\
else
printf(", ");
}
-
+
printf("\nu16 dfont_unitable[%d] = \n{\n\t", nuni);
-
+
fp0 = 0;
nent = 0;
for ( i = 0 ; i < nuni ; i++ )
diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl
index 3133172..9cb8522 100644
--- a/scripts/kconfig/streamline_config.pl
+++ b/scripts/kconfig/streamline_config.pl
@@ -589,7 +589,7 @@ while ($repeat) {
# Now we need to see if we have to check selects;
loop_select;
-}
+}
my %setconfigs;
diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index cfb8440..6fdc97e 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -68,7 +68,7 @@ UTS_TRUNCATE="cut -b -$UTS_LEN"
( echo /\* This file is auto generated, version $VERSION \*/
if [ -n "$CONFIG_FLAGS" ] ; then echo "/* $CONFIG_FLAGS */"; fi
-
+
echo \#define UTS_MACHINE \"$ARCH\"
echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\"
@@ -84,7 +84,7 @@ UTS_TRUNCATE="cut -b -$UTS_LEN"
# recompilations.
# We don't consider the file changed if only the date/time changed.
# A kernel config change will increase the generation number, thus
-# causing compile.h to be updated (including date/time) due to the
+# causing compile.h to be updated (including date/time) due to the
# changed comment in the
# first line.
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index f46e4dd..b151b63 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -130,7 +130,7 @@ if [ "$ARCH" = "um" ] ; then
cp System.map "$tmpdir/usr/lib/uml/modules/$version/System.map"
cp $KCONFIG_CONFIG "$tmpdir/usr/share/doc/$packagename/config"
gzip "$tmpdir/usr/share/doc/$packagename/config"
-else
+else
cp System.map "$tmpdir/boot/System.map-$version"
cp $KCONFIG_CONFIG "$tmpdir/boot/config-$version"
fi
diff --git a/scripts/patch-kernel b/scripts/patch-kernel
index d000ea3..49b4241 100755
--- a/scripts/patch-kernel
+++ b/scripts/patch-kernel
@@ -27,7 +27,7 @@
# Nick Holloway <Nick.Holloway@alfie.demon.co.uk>, 2nd January 1995.
#
# Added support for handling multiple types of compression. What includes
-# gzip, bzip, bzip2, zip, compress, and plaintext.
+# gzip, bzip, bzip2, zip, compress, and plaintext.
#
# Adam Sulmicki <adam@cfar.umd.edu>, 1st January 1997.
#
@@ -159,7 +159,7 @@ applyPatch () {
fi
# Remove backup files
find $sourcedir/ '(' -name '*.orig' -o -name '.*.orig' ')' -exec rm -f {} \;
-
+
return 0;
}
--
1.8.3.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] kbuild: trivial - remove trailing spaces
2014-04-28 7:26 [PATCH] kbuild: trivial - remove trailing spaces Masahiro Yamada
@ 2014-04-30 15:36 ` Michal Marek
0 siblings, 0 replies; 2+ messages in thread
From: Michal Marek @ 2014-04-30 15:36 UTC (permalink / raw)
To: Masahiro Yamada; +Cc: linux-kbuild
On Mon, Apr 28, 2014 at 04:26:18PM +0900, Masahiro Yamada wrote:
> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
> ---
> Makefile | 8 ++++----
> scripts/Makefile.build | 4 ++--
> scripts/Makefile.fwinst | 2 +-
> scripts/Makefile.host | 2 +-
> scripts/Makefile.lib | 10 +++++-----
> scripts/conmakehash.c | 12 ++++++------
> scripts/kconfig/streamline_config.pl | 2 +-
> scripts/mkcompile_h | 4 ++--
> scripts/package/builddeb | 2 +-
> scripts/patch-kernel | 4 ++--
> 10 files changed, 25 insertions(+), 25 deletions(-)
Applied to kbuild.git#kbuild, thanks.
Michal
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-04-30 15:36 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-04-28 7:26 [PATCH] kbuild: trivial - remove trailing spaces Masahiro Yamada
2014-04-30 15:36 ` Michal Marek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.