* [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
@ 2014-05-09 11:56 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Here are arch/arm/ patches to add display support for OMAP5 and AM43x.
I have these in my tree, in a branch I will send to Tony for merging. Most of
these patches have already been around the lists, but I wanted to send them one
more time to verify that all looks right and everybody is fine with them.
Tomi
Archit Taneja (1):
ARM: OMAP2+: hwmod: OMAP5 DSS hwmod data
Sathya Prakash M R (4):
ARM: AM43xx: hwmod: add DSS hwmod data
ARM: dts: am43xx: add ti,set-rate-parent for disp_clk
ARM: dts: am4372.dtsi: add DSS information
ARM: dts: am437x-gp-evm: add LCD data
Tomi Valkeinen (6):
ARM: dts: am43x-epos-evm: add LCD data
ARM: dts: omap5-clocks.dtsi: add dss iclk
ARM: dts: omap5-clocks.dtsi: add ti,set-rate-parent to dss_dss_clk
ARM: dts: omap5.dtsi: add DSS nodes
ARM: dts: omap5-uevm.dts: add tca6424a
ARM: dts: omap5-uevm.dts: add display nodes
arch/arm/boot/dts/am4372.dtsi | 30 +++
arch/arm/boot/dts/am437x-gp-evm.dts | 97 ++++++++++
arch/arm/boot/dts/am43x-epos-evm.dts | 101 ++++++++++
arch/arm/boot/dts/am43xx-clocks.dtsi | 1 +
arch/arm/boot/dts/omap5-uevm.dts | 89 +++++++++
arch/arm/boot/dts/omap5.dtsi | 70 +++++++
arch/arm/boot/dts/omap54xx-clocks.dtsi | 9 +
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 104 +++++++++++
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 283 +++++++++++++++++++++++++++++
arch/arm/mach-omap2/prcm43xx.h | 1 +
10 files changed, 785 insertions(+)
--
1.9.1
^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-09 11:56 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel, Tony Lindgren
Cc: Paul Walmsley, Archit Taneja, Sathya Prakash M R, Tomi Valkeinen
From: Sathya Prakash M R <sathyap@ti.com>
Add DSS hwmod data for AM43xx.
Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 104 +++++++++++++++++++++++++++++
arch/arm/mach-omap2/prcm43xx.h | 1 +
2 files changed, 105 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 5c2cc8083fdd..8c14db2e1e47 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -19,6 +19,8 @@
#include "omap_hwmod.h"
#include "omap_hwmod_33xx_43xx_common_data.h"
#include "prcm43xx.h"
+#include "omap_hwmod_common_data.h"
+
/* IP blocks */
static struct omap_hwmod am43xx_l4_hs_hwmod = {
@@ -415,6 +417,76 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
},
};
+/* Display sub system - DSS */
+
+static struct omap_hwmod_dma_info am43xx_dss_sdma_chs[] = {
+ { .name = "dispc", .dma_req = 5 },
+ { .dma_req = -1 },
+};
+
+struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
+ .manager_count = 1,
+ .has_framedonetv_irq = 0
+};
+
+
+static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am43xx_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &am43xx_dispc_sysc,
+};
+
+static struct omap_hwmod am43xx_dss_core_hwmod = {
+ .name = "dss_core",
+ .class = &omap2_dss_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .sdma_reqs = am43xx_dss_sdma_chs,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* display controller -dispc*/
+
+static struct omap_hwmod am43xx_dss_dispc_hwmod = {
+ .name = "dss_dispc",
+ .class = &am43xx_dispc_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ },
+ },
+ .dev_attr = &am43xx_dss_dispc_dev_attr,
+};
+
+/*RFBI*/
+
+static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
+ .name = "dss_rfbi",
+ .class = &omap2_rfbi_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ },
+ },
+};
+
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
@@ -654,6 +726,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
+ .master = &am43xx_dss_core_hwmod,
+ .slave = &am33xx_l3_main_hwmod,
+ .clk = "disp_clk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_core_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_dispc_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_rfbi_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
&am43xx_l4_ls__timer8,
@@ -748,6 +848,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_ls__ocp2scp1,
&am43xx_l3_s__usbotgss0,
&am43xx_l3_s__usbotgss1,
+ &am43xx_dss__l3_main,
+ &am43xx_l4_ls__dss,
+ &am43xx_l4_ls__dss_dispc,
+ &am43xx_l4_ls__dss_rfbi,
NULL,
};
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 7785be984edd..ad7b3e9977f8 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -142,5 +142,6 @@
#define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8
#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
+#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread* [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
@ 2014-05-09 11:56 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-arm-kernel
From: Sathya Prakash M R <sathyap@ti.com>
Add DSS hwmod data for AM43xx.
Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 104 +++++++++++++++++++++++++++++
arch/arm/mach-omap2/prcm43xx.h | 1 +
2 files changed, 105 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 5c2cc8083fdd..8c14db2e1e47 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -19,6 +19,8 @@
#include "omap_hwmod.h"
#include "omap_hwmod_33xx_43xx_common_data.h"
#include "prcm43xx.h"
+#include "omap_hwmod_common_data.h"
+
/* IP blocks */
static struct omap_hwmod am43xx_l4_hs_hwmod = {
@@ -415,6 +417,76 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
},
};
+/* Display sub system - DSS */
+
+static struct omap_hwmod_dma_info am43xx_dss_sdma_chs[] = {
+ { .name = "dispc", .dma_req = 5 },
+ { .dma_req = -1 },
+};
+
+struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
+ .manager_count = 1,
+ .has_framedonetv_irq = 0
+};
+
+
+static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am43xx_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &am43xx_dispc_sysc,
+};
+
+static struct omap_hwmod am43xx_dss_core_hwmod = {
+ .name = "dss_core",
+ .class = &omap2_dss_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .sdma_reqs = am43xx_dss_sdma_chs,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* display controller -dispc*/
+
+static struct omap_hwmod am43xx_dss_dispc_hwmod = {
+ .name = "dss_dispc",
+ .class = &am43xx_dispc_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ },
+ },
+ .dev_attr = &am43xx_dss_dispc_dev_attr,
+};
+
+/*RFBI*/
+
+static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
+ .name = "dss_rfbi",
+ .class = &omap2_rfbi_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ },
+ },
+};
+
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
@@ -654,6 +726,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
+ .master = &am43xx_dss_core_hwmod,
+ .slave = &am33xx_l3_main_hwmod,
+ .clk = "disp_clk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_core_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_dispc_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_rfbi_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
&am43xx_l4_ls__timer8,
@@ -748,6 +848,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_ls__ocp2scp1,
&am43xx_l3_s__usbotgss0,
&am43xx_l3_s__usbotgss1,
+ &am43xx_dss__l3_main,
+ &am43xx_l4_ls__dss,
+ &am43xx_l4_ls__dss_dispc,
+ &am43xx_l4_ls__dss_rfbi,
NULL,
};
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 7785be984edd..ad7b3e9977f8 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -142,5 +142,6 @@
#define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8
#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
+#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread* Re: [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-19 9:24 ` Rajendra Nayak
-1 siblings, 0 replies; 52+ messages in thread
From: Rajendra Nayak @ 2014-05-19 9:24 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: linux-omap, linux-arm-kernel, Tony Lindgren, Paul Walmsley,
Archit Taneja, Sathya Prakash M R
On Friday 09 May 2014 05:26 PM, Tomi Valkeinen wrote:
> From: Sathya Prakash M R <sathyap@ti.com>
>
> Add DSS hwmod data for AM43xx.
>
> Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 104 +++++++++++++++++++++++++++++
> arch/arm/mach-omap2/prcm43xx.h | 1 +
> 2 files changed, 105 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index 5c2cc8083fdd..8c14db2e1e47 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> @@ -19,6 +19,8 @@
> #include "omap_hwmod.h"
> #include "omap_hwmod_33xx_43xx_common_data.h"
> #include "prcm43xx.h"
> +#include "omap_hwmod_common_data.h"
> +
>
> /* IP blocks */
> static struct omap_hwmod am43xx_l4_hs_hwmod = {
> @@ -415,6 +417,76 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
> },
> };
>
> +/* Display sub system - DSS */
> +
> +static struct omap_hwmod_dma_info am43xx_dss_sdma_chs[] = {
> + { .name = "dispc", .dma_req = 5 },
> + { .dma_req = -1 },
> +};
the dma info needs to come in from DT. Besides these are edma
request lines and not sdma.
> +
> +struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
> + .manager_count = 1,
> + .has_framedonetv_irq = 0
> +};
> +
> +
[]..
> +
> /* Interfaces */
> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
> .master = &am33xx_l3_main_hwmod,
> @@ -654,6 +726,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
> + .master = &am43xx_dss_core_hwmod,
> + .slave = &am33xx_l3_main_hwmod,
> + .clk = "disp_clk",
Isn't l3_gclk that clocks the l3 OCP master port?
regards,
Rajendra
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_core_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_dispc_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_rfbi_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am33xx_l4_wkup__synctimer,
> &am43xx_l4_ls__timer8,
> @@ -748,6 +848,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am43xx_l4_ls__ocp2scp1,
> &am43xx_l3_s__usbotgss0,
> &am43xx_l3_s__usbotgss1,
> + &am43xx_dss__l3_main,
> + &am43xx_l4_ls__dss,
> + &am43xx_l4_ls__dss_dispc,
> + &am43xx_l4_ls__dss_rfbi,
> NULL,
> };
>
> diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
> index 7785be984edd..ad7b3e9977f8 100644
> --- a/arch/arm/mach-omap2/prcm43xx.h
> +++ b/arch/arm/mach-omap2/prcm43xx.h
> @@ -142,5 +142,6 @@
> #define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8
> #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
> #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
> +#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
>
> #endif
>
^ permalink raw reply [flat|nested] 52+ messages in thread* [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
@ 2014-05-19 9:24 ` Rajendra Nayak
0 siblings, 0 replies; 52+ messages in thread
From: Rajendra Nayak @ 2014-05-19 9:24 UTC (permalink / raw)
To: linux-arm-kernel
On Friday 09 May 2014 05:26 PM, Tomi Valkeinen wrote:
> From: Sathya Prakash M R <sathyap@ti.com>
>
> Add DSS hwmod data for AM43xx.
>
> Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 104 +++++++++++++++++++++++++++++
> arch/arm/mach-omap2/prcm43xx.h | 1 +
> 2 files changed, 105 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index 5c2cc8083fdd..8c14db2e1e47 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> @@ -19,6 +19,8 @@
> #include "omap_hwmod.h"
> #include "omap_hwmod_33xx_43xx_common_data.h"
> #include "prcm43xx.h"
> +#include "omap_hwmod_common_data.h"
> +
>
> /* IP blocks */
> static struct omap_hwmod am43xx_l4_hs_hwmod = {
> @@ -415,6 +417,76 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
> },
> };
>
> +/* Display sub system - DSS */
> +
> +static struct omap_hwmod_dma_info am43xx_dss_sdma_chs[] = {
> + { .name = "dispc", .dma_req = 5 },
> + { .dma_req = -1 },
> +};
the dma info needs to come in from DT. Besides these are edma
request lines and not sdma.
> +
> +struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
> + .manager_count = 1,
> + .has_framedonetv_irq = 0
> +};
> +
> +
[]..
> +
> /* Interfaces */
> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
> .master = &am33xx_l3_main_hwmod,
> @@ -654,6 +726,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
> + .master = &am43xx_dss_core_hwmod,
> + .slave = &am33xx_l3_main_hwmod,
> + .clk = "disp_clk",
Isn't l3_gclk that clocks the l3 OCP master port?
regards,
Rajendra
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_core_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_dispc_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_rfbi_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am33xx_l4_wkup__synctimer,
> &am43xx_l4_ls__timer8,
> @@ -748,6 +848,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am43xx_l4_ls__ocp2scp1,
> &am43xx_l3_s__usbotgss0,
> &am43xx_l3_s__usbotgss1,
> + &am43xx_dss__l3_main,
> + &am43xx_l4_ls__dss,
> + &am43xx_l4_ls__dss_dispc,
> + &am43xx_l4_ls__dss_rfbi,
> NULL,
> };
>
> diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
> index 7785be984edd..ad7b3e9977f8 100644
> --- a/arch/arm/mach-omap2/prcm43xx.h
> +++ b/arch/arm/mach-omap2/prcm43xx.h
> @@ -142,5 +142,6 @@
> #define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8
> #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
> #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
> +#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
>
> #endif
>
^ permalink raw reply [flat|nested] 52+ messages in thread* Re: [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
2014-05-19 9:24 ` Rajendra Nayak
@ 2014-05-19 10:12 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-19 10:12 UTC (permalink / raw)
To: Rajendra Nayak
Cc: linux-omap, linux-arm-kernel, Tony Lindgren, Paul Walmsley,
Archit Taneja, Sathya Prakash M R
[-- Attachment #1: Type: text/plain, Size: 2530 bytes --]
On 19/05/14 12:24, Rajendra Nayak wrote:
> On Friday 09 May 2014 05:26 PM, Tomi Valkeinen wrote:
>> From: Sathya Prakash M R <sathyap@ti.com>
>>
>> Add DSS hwmod data for AM43xx.
>>
>> Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
>> ---
>> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 104 +++++++++++++++++++++++++++++
>> arch/arm/mach-omap2/prcm43xx.h | 1 +
>> 2 files changed, 105 insertions(+)
>>
>> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>> index 5c2cc8083fdd..8c14db2e1e47 100644
>> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>> @@ -19,6 +19,8 @@
>> #include "omap_hwmod.h"
>> #include "omap_hwmod_33xx_43xx_common_data.h"
>> #include "prcm43xx.h"
>> +#include "omap_hwmod_common_data.h"
>> +
>>
>> /* IP blocks */
>> static struct omap_hwmod am43xx_l4_hs_hwmod = {
>> @@ -415,6 +417,76 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
>> },
>> };
>>
>> +/* Display sub system - DSS */
>> +
>> +static struct omap_hwmod_dma_info am43xx_dss_sdma_chs[] = {
>> + { .name = "dispc", .dma_req = 5 },
>> + { .dma_req = -1 },
>> +};
>
> the dma info needs to come in from DT. Besides these are edma
> request lines and not sdma.
Right, the sdma information is not needed anymore.
>> +
>> +struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
>> + .manager_count = 1,
>> + .has_framedonetv_irq = 0
>> +};
>> +
>> +
> []..
>
>> +
>> /* Interfaces */
>> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
>> .master = &am33xx_l3_main_hwmod,
>> @@ -654,6 +726,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
>> .user = OCP_USER_MPU | OCP_USER_SDMA,
>> };
>>
>> +static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
>> + .master = &am43xx_dss_core_hwmod,
>> + .slave = &am33xx_l3_main_hwmod,
>> + .clk = "disp_clk",
>
> Isn't l3_gclk that clocks the l3 OCP master port?
Hmm, possibly... dispc_clk looks a bit odd there. It's been very
difficult to figure out things like that, with the not-so-good am43xx
documentation.
The documentation mentions "L3 Fast Interconnect" and "LCDL3OCPIFCLK"
related to DSS's OCP master, but searching for those in the TRM doesn't
reveal much.
Would the l3_gclk match the "L3 Fast Interconnect" and l3s_gclk match
the "L3 Slow Interconnect".
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 52+ messages in thread* [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
@ 2014-05-19 10:12 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-19 10:12 UTC (permalink / raw)
To: linux-arm-kernel
On 19/05/14 12:24, Rajendra Nayak wrote:
> On Friday 09 May 2014 05:26 PM, Tomi Valkeinen wrote:
>> From: Sathya Prakash M R <sathyap@ti.com>
>>
>> Add DSS hwmod data for AM43xx.
>>
>> Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
>> ---
>> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 104 +++++++++++++++++++++++++++++
>> arch/arm/mach-omap2/prcm43xx.h | 1 +
>> 2 files changed, 105 insertions(+)
>>
>> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>> index 5c2cc8083fdd..8c14db2e1e47 100644
>> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>> @@ -19,6 +19,8 @@
>> #include "omap_hwmod.h"
>> #include "omap_hwmod_33xx_43xx_common_data.h"
>> #include "prcm43xx.h"
>> +#include "omap_hwmod_common_data.h"
>> +
>>
>> /* IP blocks */
>> static struct omap_hwmod am43xx_l4_hs_hwmod = {
>> @@ -415,6 +417,76 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
>> },
>> };
>>
>> +/* Display sub system - DSS */
>> +
>> +static struct omap_hwmod_dma_info am43xx_dss_sdma_chs[] = {
>> + { .name = "dispc", .dma_req = 5 },
>> + { .dma_req = -1 },
>> +};
>
> the dma info needs to come in from DT. Besides these are edma
> request lines and not sdma.
Right, the sdma information is not needed anymore.
>> +
>> +struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
>> + .manager_count = 1,
>> + .has_framedonetv_irq = 0
>> +};
>> +
>> +
> []..
>
>> +
>> /* Interfaces */
>> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
>> .master = &am33xx_l3_main_hwmod,
>> @@ -654,6 +726,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
>> .user = OCP_USER_MPU | OCP_USER_SDMA,
>> };
>>
>> +static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
>> + .master = &am43xx_dss_core_hwmod,
>> + .slave = &am33xx_l3_main_hwmod,
>> + .clk = "disp_clk",
>
> Isn't l3_gclk that clocks the l3 OCP master port?
Hmm, possibly... dispc_clk looks a bit odd there. It's been very
difficult to figure out things like that, with the not-so-good am43xx
documentation.
The documentation mentions "L3 Fast Interconnect" and "LCDL3OCPIFCLK"
related to DSS's OCP master, but searching for those in the TRM doesn't
reveal much.
Would the l3_gclk match the "L3 Fast Interconnect" and l3s_gclk match
the "L3 Slow Interconnect".
Tomi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140519/468c7519/attachment-0001.sig>
^ permalink raw reply [flat|nested] 52+ messages in thread* Re: [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
2014-05-19 10:12 ` Tomi Valkeinen
@ 2014-05-19 10:28 ` Rajendra Nayak
-1 siblings, 0 replies; 52+ messages in thread
From: Rajendra Nayak @ 2014-05-19 10:28 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: linux-omap, linux-arm-kernel, Tony Lindgren, Paul Walmsley,
Archit Taneja, Sathya Prakash M R
On Monday 19 May 2014 03:42 PM, Tomi Valkeinen wrote:
> On 19/05/14 12:24, Rajendra Nayak wrote:
>> On Friday 09 May 2014 05:26 PM, Tomi Valkeinen wrote:
>>> From: Sathya Prakash M R <sathyap@ti.com>
>>>
>>> Add DSS hwmod data for AM43xx.
>>>
>>> Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
>>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
>>> ---
>>> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 104 +++++++++++++++++++++++++++++
>>> arch/arm/mach-omap2/prcm43xx.h | 1 +
>>> 2 files changed, 105 insertions(+)
>>>
>>> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>>> index 5c2cc8083fdd..8c14db2e1e47 100644
>>> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>>> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>>> @@ -19,6 +19,8 @@
>>> #include "omap_hwmod.h"
>>> #include "omap_hwmod_33xx_43xx_common_data.h"
>>> #include "prcm43xx.h"
>>> +#include "omap_hwmod_common_data.h"
>>> +
>>>
>>> /* IP blocks */
>>> static struct omap_hwmod am43xx_l4_hs_hwmod = {
>>> @@ -415,6 +417,76 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
>>> },
>>> };
>>>
>>> +/* Display sub system - DSS */
>>> +
>>> +static struct omap_hwmod_dma_info am43xx_dss_sdma_chs[] = {
>>> + { .name = "dispc", .dma_req = 5 },
>>> + { .dma_req = -1 },
>>> +};
>>
>> the dma info needs to come in from DT. Besides these are edma
>> request lines and not sdma.
>
> Right, the sdma information is not needed anymore.
>
>>> +
>>> +struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
>>> + .manager_count = 1,
>>> + .has_framedonetv_irq = 0
>>> +};
>>> +
>>> +
>> []..
>>
>>> +
>>> /* Interfaces */
>>> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
>>> .master = &am33xx_l3_main_hwmod,
>>> @@ -654,6 +726,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
>>> .user = OCP_USER_MPU | OCP_USER_SDMA,
>>> };
>>>
>>> +static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
>>> + .master = &am43xx_dss_core_hwmod,
>>> + .slave = &am33xx_l3_main_hwmod,
>>> + .clk = "disp_clk",
>>
>> Isn't l3_gclk that clocks the l3 OCP master port?
>
> Hmm, possibly... dispc_clk looks a bit odd there. It's been very
> difficult to figure out things like that, with the not-so-good am43xx
> documentation.
>
> The documentation mentions "L3 Fast Interconnect" and "LCDL3OCPIFCLK"
> related to DSS's OCP master, but searching for those in the TRM doesn't
> reveal much.
>
> Would the l3_gclk match the "L3 Fast Interconnect" and l3s_gclk match
> the "L3 Slow Interconnect".
Yeah, thats what it looks like to me. l3_gclk is the 200Mhz clock derived from
core-m4 post divider and l3s_gclk/l4ls_gclk are half of that at 100Mhz, derived
using a fixed divider of 2.
regards,
Rajendra
>
> Tomi
>
>
^ permalink raw reply [flat|nested] 52+ messages in thread* [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
@ 2014-05-19 10:28 ` Rajendra Nayak
0 siblings, 0 replies; 52+ messages in thread
From: Rajendra Nayak @ 2014-05-19 10:28 UTC (permalink / raw)
To: linux-arm-kernel
On Monday 19 May 2014 03:42 PM, Tomi Valkeinen wrote:
> On 19/05/14 12:24, Rajendra Nayak wrote:
>> On Friday 09 May 2014 05:26 PM, Tomi Valkeinen wrote:
>>> From: Sathya Prakash M R <sathyap@ti.com>
>>>
>>> Add DSS hwmod data for AM43xx.
>>>
>>> Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
>>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
>>> ---
>>> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 104 +++++++++++++++++++++++++++++
>>> arch/arm/mach-omap2/prcm43xx.h | 1 +
>>> 2 files changed, 105 insertions(+)
>>>
>>> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>>> index 5c2cc8083fdd..8c14db2e1e47 100644
>>> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>>> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
>>> @@ -19,6 +19,8 @@
>>> #include "omap_hwmod.h"
>>> #include "omap_hwmod_33xx_43xx_common_data.h"
>>> #include "prcm43xx.h"
>>> +#include "omap_hwmod_common_data.h"
>>> +
>>>
>>> /* IP blocks */
>>> static struct omap_hwmod am43xx_l4_hs_hwmod = {
>>> @@ -415,6 +417,76 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
>>> },
>>> };
>>>
>>> +/* Display sub system - DSS */
>>> +
>>> +static struct omap_hwmod_dma_info am43xx_dss_sdma_chs[] = {
>>> + { .name = "dispc", .dma_req = 5 },
>>> + { .dma_req = -1 },
>>> +};
>>
>> the dma info needs to come in from DT. Besides these are edma
>> request lines and not sdma.
>
> Right, the sdma information is not needed anymore.
>
>>> +
>>> +struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
>>> + .manager_count = 1,
>>> + .has_framedonetv_irq = 0
>>> +};
>>> +
>>> +
>> []..
>>
>>> +
>>> /* Interfaces */
>>> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
>>> .master = &am33xx_l3_main_hwmod,
>>> @@ -654,6 +726,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
>>> .user = OCP_USER_MPU | OCP_USER_SDMA,
>>> };
>>>
>>> +static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
>>> + .master = &am43xx_dss_core_hwmod,
>>> + .slave = &am33xx_l3_main_hwmod,
>>> + .clk = "disp_clk",
>>
>> Isn't l3_gclk that clocks the l3 OCP master port?
>
> Hmm, possibly... dispc_clk looks a bit odd there. It's been very
> difficult to figure out things like that, with the not-so-good am43xx
> documentation.
>
> The documentation mentions "L3 Fast Interconnect" and "LCDL3OCPIFCLK"
> related to DSS's OCP master, but searching for those in the TRM doesn't
> reveal much.
>
> Would the l3_gclk match the "L3 Fast Interconnect" and l3s_gclk match
> the "L3 Slow Interconnect".
Yeah, thats what it looks like to me. l3_gclk is the 200Mhz clock derived from
core-m4 post divider and l3s_gclk/l4ls_gclk are half of that at 100Mhz, derived
using a fixed divider of 2.
regards,
Rajendra
>
> Tomi
>
>
^ permalink raw reply [flat|nested] 52+ messages in thread* Re: [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
2014-05-19 10:28 ` Rajendra Nayak
@ 2014-05-19 11:10 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-19 11:10 UTC (permalink / raw)
To: Rajendra Nayak, Paul Walmsley
Cc: linux-omap, linux-arm-kernel, Tony Lindgren, Archit Taneja,
Sathya Prakash M R
[-- Attachment #1: Type: text/plain, Size: 4958 bytes --]
On 19/05/14 13:28, Rajendra Nayak wrote:
> Yeah, thats what it looks like to me. l3_gclk is the 200Mhz clock derived from
> core-m4 post divider and l3s_gclk/l4ls_gclk are half of that at 100Mhz, derived
> using a fixed divider of 2.
Here's an updated patch, with the sdma entry removed and the ocp clock
changed to l3_gclk.
From bfaf0fafb21c698c86640764c1aa62d6fc73992a Mon Sep 17 00:00:00 2001
From: Sathya Prakash M R <sathyap@ti.com>
Date: Mon, 24 Mar 2014 16:31:53 +0530
Subject: [PATCH] ARM: AM43xx: hwmod: add DSS hwmod data
Add DSS hwmod data for AM43xx.
Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 98 ++++++++++++++++++++++++++++++
arch/arm/mach-omap2/prcm43xx.h | 1 +
2 files changed, 99 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 5c2cc8083fdd..d2a7b6dc36f2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -19,6 +19,8 @@
#include "omap_hwmod.h"
#include "omap_hwmod_33xx_43xx_common_data.h"
#include "prcm43xx.h"
+#include "omap_hwmod_common_data.h"
+
/* IP blocks */
static struct omap_hwmod am43xx_l4_hs_hwmod = {
@@ -415,6 +417,70 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
},
};
+/* Display sub system - DSS */
+
+struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
+ .manager_count = 1,
+ .has_framedonetv_irq = 0
+};
+
+
+static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am43xx_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &am43xx_dispc_sysc,
+};
+
+static struct omap_hwmod am43xx_dss_core_hwmod = {
+ .name = "dss_core",
+ .class = &omap2_dss_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* display controller -dispc*/
+
+static struct omap_hwmod am43xx_dss_dispc_hwmod = {
+ .name = "dss_dispc",
+ .class = &am43xx_dispc_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ },
+ },
+ .dev_attr = &am43xx_dss_dispc_dev_attr,
+};
+
+/*RFBI*/
+
+static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
+ .name = "dss_rfbi",
+ .class = &omap2_rfbi_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ },
+ },
+};
+
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
@@ -654,6 +720,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
+ .master = &am43xx_dss_core_hwmod,
+ .slave = &am33xx_l3_main_hwmod,
+ .clk = "l3_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_core_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_dispc_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_rfbi_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
&am43xx_l4_ls__timer8,
@@ -748,6 +842,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_ls__ocp2scp1,
&am43xx_l3_s__usbotgss0,
&am43xx_l3_s__usbotgss1,
+ &am43xx_dss__l3_main,
+ &am43xx_l4_ls__dss,
+ &am43xx_l4_ls__dss_dispc,
+ &am43xx_l4_ls__dss_rfbi,
NULL,
};
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 7785be984edd..ad7b3e9977f8 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -142,5 +142,6 @@
#define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8
#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
+#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
#endif
--
1.9.1
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply related [flat|nested] 52+ messages in thread* [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
@ 2014-05-19 11:10 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-19 11:10 UTC (permalink / raw)
To: linux-arm-kernel
On 19/05/14 13:28, Rajendra Nayak wrote:
> Yeah, thats what it looks like to me. l3_gclk is the 200Mhz clock derived from
> core-m4 post divider and l3s_gclk/l4ls_gclk are half of that at 100Mhz, derived
> using a fixed divider of 2.
Here's an updated patch, with the sdma entry removed and the ocp clock
changed to l3_gclk.
>From bfaf0fafb21c698c86640764c1aa62d6fc73992a Mon Sep 17 00:00:00 2001
From: Sathya Prakash M R <sathyap@ti.com>
Date: Mon, 24 Mar 2014 16:31:53 +0530
Subject: [PATCH] ARM: AM43xx: hwmod: add DSS hwmod data
Add DSS hwmod data for AM43xx.
Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 98 ++++++++++++++++++++++++++++++
arch/arm/mach-omap2/prcm43xx.h | 1 +
2 files changed, 99 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 5c2cc8083fdd..d2a7b6dc36f2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -19,6 +19,8 @@
#include "omap_hwmod.h"
#include "omap_hwmod_33xx_43xx_common_data.h"
#include "prcm43xx.h"
+#include "omap_hwmod_common_data.h"
+
/* IP blocks */
static struct omap_hwmod am43xx_l4_hs_hwmod = {
@@ -415,6 +417,70 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
},
};
+/* Display sub system - DSS */
+
+struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
+ .manager_count = 1,
+ .has_framedonetv_irq = 0
+};
+
+
+static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am43xx_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &am43xx_dispc_sysc,
+};
+
+static struct omap_hwmod am43xx_dss_core_hwmod = {
+ .name = "dss_core",
+ .class = &omap2_dss_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* display controller -dispc*/
+
+static struct omap_hwmod am43xx_dss_dispc_hwmod = {
+ .name = "dss_dispc",
+ .class = &am43xx_dispc_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ },
+ },
+ .dev_attr = &am43xx_dss_dispc_dev_attr,
+};
+
+/*RFBI*/
+
+static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
+ .name = "dss_rfbi",
+ .class = &omap2_rfbi_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "disp_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
+ },
+ },
+};
+
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
@@ -654,6 +720,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
+ .master = &am43xx_dss_core_hwmod,
+ .slave = &am33xx_l3_main_hwmod,
+ .clk = "l3_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_core_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_dispc_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_dss_rfbi_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
&am43xx_l4_ls__timer8,
@@ -748,6 +842,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_ls__ocp2scp1,
&am43xx_l3_s__usbotgss0,
&am43xx_l3_s__usbotgss1,
+ &am43xx_dss__l3_main,
+ &am43xx_l4_ls__dss,
+ &am43xx_l4_ls__dss_dispc,
+ &am43xx_l4_ls__dss_rfbi,
NULL,
};
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 7785be984edd..ad7b3e9977f8 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -142,5 +142,6 @@
#define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8
#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
+#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
#endif
--
1.9.1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140519/d8fe3fef/attachment.sig>
^ permalink raw reply related [flat|nested] 52+ messages in thread* Re: [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
2014-05-19 11:10 ` Tomi Valkeinen
@ 2014-05-19 11:23 ` Rajendra Nayak
-1 siblings, 0 replies; 52+ messages in thread
From: Rajendra Nayak @ 2014-05-19 11:23 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Paul Walmsley, linux-omap, linux-arm-kernel, Tony Lindgren,
Archit Taneja, Sathya Prakash M R
On Monday 19 May 2014 04:40 PM, Tomi Valkeinen wrote:
> On 19/05/14 13:28, Rajendra Nayak wrote:
>
>> Yeah, thats what it looks like to me. l3_gclk is the 200Mhz clock derived from
>> core-m4 post divider and l3s_gclk/l4ls_gclk are half of that at 100Mhz, derived
>> using a fixed divider of 2.
>
> Here's an updated patch, with the sdma entry removed and the ocp clock
> changed to l3_gclk.
>
> From bfaf0fafb21c698c86640764c1aa62d6fc73992a Mon Sep 17 00:00:00 2001
> From: Sathya Prakash M R <sathyap@ti.com>
> Date: Mon, 24 Mar 2014 16:31:53 +0530
> Subject: [PATCH] ARM: AM43xx: hwmod: add DSS hwmod data
>
> Add DSS hwmod data for AM43xx.
>
> Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Looks good to me, feel free to add
Acked-by: Rajendra Nayak <rnayak@ti.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 98 ++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/prcm43xx.h | 1 +
> 2 files changed, 99 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index 5c2cc8083fdd..d2a7b6dc36f2 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> @@ -19,6 +19,8 @@
> #include "omap_hwmod.h"
> #include "omap_hwmod_33xx_43xx_common_data.h"
> #include "prcm43xx.h"
> +#include "omap_hwmod_common_data.h"
> +
>
> /* IP blocks */
> static struct omap_hwmod am43xx_l4_hs_hwmod = {
> @@ -415,6 +417,70 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
> },
> };
>
> +/* Display sub system - DSS */
> +
> +struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
> + .manager_count = 1,
> + .has_framedonetv_irq = 0
> +};
> +
> +
> +static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = {
> + .rev_offs = 0x0000,
> + .sysc_offs = 0x0010,
> + .syss_offs = 0x0014,
> + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> + .sysc_fields = &omap_hwmod_sysc_type1,
> +};
> +
> +static struct omap_hwmod_class am43xx_dispc_hwmod_class = {
> + .name = "dispc",
> + .sysc = &am43xx_dispc_sysc,
> +};
> +
> +static struct omap_hwmod am43xx_dss_core_hwmod = {
> + .name = "dss_core",
> + .class = &omap2_dss_hwmod_class,
> + .clkdm_name = "dss_clkdm",
> + .main_clk = "disp_clk",
> + .prcm = {
> + .omap4 = {
> + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
> + .modulemode = MODULEMODE_SWCTRL,
> + },
> + },
> +};
> +
> +/* display controller -dispc*/
> +
> +static struct omap_hwmod am43xx_dss_dispc_hwmod = {
> + .name = "dss_dispc",
> + .class = &am43xx_dispc_hwmod_class,
> + .clkdm_name = "dss_clkdm",
> + .main_clk = "disp_clk",
> + .prcm = {
> + .omap4 = {
> + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
> + },
> + },
> + .dev_attr = &am43xx_dss_dispc_dev_attr,
> +};
> +
> +/*RFBI*/
> +
> +static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
> + .name = "dss_rfbi",
> + .class = &omap2_rfbi_hwmod_class,
> + .clkdm_name = "dss_clkdm",
> + .main_clk = "disp_clk",
> + .prcm = {
> + .omap4 = {
> + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
> + },
> + },
> +};
> +
> /* Interfaces */
> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
> .master = &am33xx_l3_main_hwmod,
> @@ -654,6 +720,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
> + .master = &am43xx_dss_core_hwmod,
> + .slave = &am33xx_l3_main_hwmod,
> + .clk = "l3_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_core_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_dispc_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_rfbi_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am33xx_l4_wkup__synctimer,
> &am43xx_l4_ls__timer8,
> @@ -748,6 +842,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am43xx_l4_ls__ocp2scp1,
> &am43xx_l3_s__usbotgss0,
> &am43xx_l3_s__usbotgss1,
> + &am43xx_dss__l3_main,
> + &am43xx_l4_ls__dss,
> + &am43xx_l4_ls__dss_dispc,
> + &am43xx_l4_ls__dss_rfbi,
> NULL,
> };
>
> diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
> index 7785be984edd..ad7b3e9977f8 100644
> --- a/arch/arm/mach-omap2/prcm43xx.h
> +++ b/arch/arm/mach-omap2/prcm43xx.h
> @@ -142,5 +142,6 @@
> #define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8
> #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
> #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
> +#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
>
> #endif
>
^ permalink raw reply [flat|nested] 52+ messages in thread* [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
@ 2014-05-19 11:23 ` Rajendra Nayak
0 siblings, 0 replies; 52+ messages in thread
From: Rajendra Nayak @ 2014-05-19 11:23 UTC (permalink / raw)
To: linux-arm-kernel
On Monday 19 May 2014 04:40 PM, Tomi Valkeinen wrote:
> On 19/05/14 13:28, Rajendra Nayak wrote:
>
>> Yeah, thats what it looks like to me. l3_gclk is the 200Mhz clock derived from
>> core-m4 post divider and l3s_gclk/l4ls_gclk are half of that at 100Mhz, derived
>> using a fixed divider of 2.
>
> Here's an updated patch, with the sdma entry removed and the ocp clock
> changed to l3_gclk.
>
> From bfaf0fafb21c698c86640764c1aa62d6fc73992a Mon Sep 17 00:00:00 2001
> From: Sathya Prakash M R <sathyap@ti.com>
> Date: Mon, 24 Mar 2014 16:31:53 +0530
> Subject: [PATCH] ARM: AM43xx: hwmod: add DSS hwmod data
>
> Add DSS hwmod data for AM43xx.
>
> Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Looks good to me, feel free to add
Acked-by: Rajendra Nayak <rnayak@ti.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 98 ++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/prcm43xx.h | 1 +
> 2 files changed, 99 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index 5c2cc8083fdd..d2a7b6dc36f2 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> @@ -19,6 +19,8 @@
> #include "omap_hwmod.h"
> #include "omap_hwmod_33xx_43xx_common_data.h"
> #include "prcm43xx.h"
> +#include "omap_hwmod_common_data.h"
> +
>
> /* IP blocks */
> static struct omap_hwmod am43xx_l4_hs_hwmod = {
> @@ -415,6 +417,70 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
> },
> };
>
> +/* Display sub system - DSS */
> +
> +struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
> + .manager_count = 1,
> + .has_framedonetv_irq = 0
> +};
> +
> +
> +static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = {
> + .rev_offs = 0x0000,
> + .sysc_offs = 0x0010,
> + .syss_offs = 0x0014,
> + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> + .sysc_fields = &omap_hwmod_sysc_type1,
> +};
> +
> +static struct omap_hwmod_class am43xx_dispc_hwmod_class = {
> + .name = "dispc",
> + .sysc = &am43xx_dispc_sysc,
> +};
> +
> +static struct omap_hwmod am43xx_dss_core_hwmod = {
> + .name = "dss_core",
> + .class = &omap2_dss_hwmod_class,
> + .clkdm_name = "dss_clkdm",
> + .main_clk = "disp_clk",
> + .prcm = {
> + .omap4 = {
> + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
> + .modulemode = MODULEMODE_SWCTRL,
> + },
> + },
> +};
> +
> +/* display controller -dispc*/
> +
> +static struct omap_hwmod am43xx_dss_dispc_hwmod = {
> + .name = "dss_dispc",
> + .class = &am43xx_dispc_hwmod_class,
> + .clkdm_name = "dss_clkdm",
> + .main_clk = "disp_clk",
> + .prcm = {
> + .omap4 = {
> + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
> + },
> + },
> + .dev_attr = &am43xx_dss_dispc_dev_attr,
> +};
> +
> +/*RFBI*/
> +
> +static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
> + .name = "dss_rfbi",
> + .class = &omap2_rfbi_hwmod_class,
> + .clkdm_name = "dss_clkdm",
> + .main_clk = "disp_clk",
> + .prcm = {
> + .omap4 = {
> + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
> + },
> + },
> +};
> +
> /* Interfaces */
> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
> .master = &am33xx_l3_main_hwmod,
> @@ -654,6 +720,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
> + .master = &am43xx_dss_core_hwmod,
> + .slave = &am33xx_l3_main_hwmod,
> + .clk = "l3_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_core_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_dispc_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_rfbi_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am33xx_l4_wkup__synctimer,
> &am43xx_l4_ls__timer8,
> @@ -748,6 +842,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am43xx_l4_ls__ocp2scp1,
> &am43xx_l3_s__usbotgss0,
> &am43xx_l3_s__usbotgss1,
> + &am43xx_dss__l3_main,
> + &am43xx_l4_ls__dss,
> + &am43xx_l4_ls__dss_dispc,
> + &am43xx_l4_ls__dss_rfbi,
> NULL,
> };
>
> diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
> index 7785be984edd..ad7b3e9977f8 100644
> --- a/arch/arm/mach-omap2/prcm43xx.h
> +++ b/arch/arm/mach-omap2/prcm43xx.h
> @@ -142,5 +142,6 @@
> #define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8
> #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
> #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
> +#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
>
> #endif
>
^ permalink raw reply [flat|nested] 52+ messages in thread
* Re: [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
2014-05-19 11:10 ` Tomi Valkeinen
@ 2014-05-27 6:29 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-27 6:29 UTC (permalink / raw)
To: Paul Walmsley
Cc: Rajendra Nayak, linux-omap, linux-arm-kernel, Tony Lindgren,
Archit Taneja, Sathya Prakash M R
[-- Attachment #1: Type: text/plain, Size: 5362 bytes --]
Hi Paul,
On 19/05/14 14:10, Tomi Valkeinen wrote:
> On 19/05/14 13:28, Rajendra Nayak wrote:
>
>> Yeah, thats what it looks like to me. l3_gclk is the 200Mhz clock derived from
>> core-m4 post divider and l3s_gclk/l4ls_gclk are half of that at 100Mhz, derived
>> using a fixed divider of 2.
>
> Here's an updated patch, with the sdma entry removed and the ocp clock
> changed to l3_gclk.
Can we get this to 3.16?
Tomi
> From bfaf0fafb21c698c86640764c1aa62d6fc73992a Mon Sep 17 00:00:00 2001
> From: Sathya Prakash M R <sathyap@ti.com>
> Date: Mon, 24 Mar 2014 16:31:53 +0530
> Subject: [PATCH] ARM: AM43xx: hwmod: add DSS hwmod data
>
> Add DSS hwmod data for AM43xx.
>
> Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 98 ++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/prcm43xx.h | 1 +
> 2 files changed, 99 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index 5c2cc8083fdd..d2a7b6dc36f2 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> @@ -19,6 +19,8 @@
> #include "omap_hwmod.h"
> #include "omap_hwmod_33xx_43xx_common_data.h"
> #include "prcm43xx.h"
> +#include "omap_hwmod_common_data.h"
> +
>
> /* IP blocks */
> static struct omap_hwmod am43xx_l4_hs_hwmod = {
> @@ -415,6 +417,70 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
> },
> };
>
> +/* Display sub system - DSS */
> +
> +struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
> + .manager_count = 1,
> + .has_framedonetv_irq = 0
> +};
> +
> +
> +static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = {
> + .rev_offs = 0x0000,
> + .sysc_offs = 0x0010,
> + .syss_offs = 0x0014,
> + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> + .sysc_fields = &omap_hwmod_sysc_type1,
> +};
> +
> +static struct omap_hwmod_class am43xx_dispc_hwmod_class = {
> + .name = "dispc",
> + .sysc = &am43xx_dispc_sysc,
> +};
> +
> +static struct omap_hwmod am43xx_dss_core_hwmod = {
> + .name = "dss_core",
> + .class = &omap2_dss_hwmod_class,
> + .clkdm_name = "dss_clkdm",
> + .main_clk = "disp_clk",
> + .prcm = {
> + .omap4 = {
> + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
> + .modulemode = MODULEMODE_SWCTRL,
> + },
> + },
> +};
> +
> +/* display controller -dispc*/
> +
> +static struct omap_hwmod am43xx_dss_dispc_hwmod = {
> + .name = "dss_dispc",
> + .class = &am43xx_dispc_hwmod_class,
> + .clkdm_name = "dss_clkdm",
> + .main_clk = "disp_clk",
> + .prcm = {
> + .omap4 = {
> + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
> + },
> + },
> + .dev_attr = &am43xx_dss_dispc_dev_attr,
> +};
> +
> +/*RFBI*/
> +
> +static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
> + .name = "dss_rfbi",
> + .class = &omap2_rfbi_hwmod_class,
> + .clkdm_name = "dss_clkdm",
> + .main_clk = "disp_clk",
> + .prcm = {
> + .omap4 = {
> + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
> + },
> + },
> +};
> +
> /* Interfaces */
> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
> .master = &am33xx_l3_main_hwmod,
> @@ -654,6 +720,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
> + .master = &am43xx_dss_core_hwmod,
> + .slave = &am33xx_l3_main_hwmod,
> + .clk = "l3_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_core_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_dispc_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_rfbi_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am33xx_l4_wkup__synctimer,
> &am43xx_l4_ls__timer8,
> @@ -748,6 +842,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am43xx_l4_ls__ocp2scp1,
> &am43xx_l3_s__usbotgss0,
> &am43xx_l3_s__usbotgss1,
> + &am43xx_dss__l3_main,
> + &am43xx_l4_ls__dss,
> + &am43xx_l4_ls__dss_dispc,
> + &am43xx_l4_ls__dss_rfbi,
> NULL,
> };
>
> diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
> index 7785be984edd..ad7b3e9977f8 100644
> --- a/arch/arm/mach-omap2/prcm43xx.h
> +++ b/arch/arm/mach-omap2/prcm43xx.h
> @@ -142,5 +142,6 @@
> #define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8
> #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
> #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
> +#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
>
> #endif
>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 52+ messages in thread* [PATCH 01/11] ARM: AM43xx: hwmod: add DSS hwmod data
@ 2014-05-27 6:29 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-27 6:29 UTC (permalink / raw)
To: linux-arm-kernel
Hi Paul,
On 19/05/14 14:10, Tomi Valkeinen wrote:
> On 19/05/14 13:28, Rajendra Nayak wrote:
>
>> Yeah, thats what it looks like to me. l3_gclk is the 200Mhz clock derived from
>> core-m4 post divider and l3s_gclk/l4ls_gclk are half of that at 100Mhz, derived
>> using a fixed divider of 2.
>
> Here's an updated patch, with the sdma entry removed and the ocp clock
> changed to l3_gclk.
Can we get this to 3.16?
Tomi
> From bfaf0fafb21c698c86640764c1aa62d6fc73992a Mon Sep 17 00:00:00 2001
> From: Sathya Prakash M R <sathyap@ti.com>
> Date: Mon, 24 Mar 2014 16:31:53 +0530
> Subject: [PATCH] ARM: AM43xx: hwmod: add DSS hwmod data
>
> Add DSS hwmod data for AM43xx.
>
> Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 98 ++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/prcm43xx.h | 1 +
> 2 files changed, 99 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> index 5c2cc8083fdd..d2a7b6dc36f2 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
> @@ -19,6 +19,8 @@
> #include "omap_hwmod.h"
> #include "omap_hwmod_33xx_43xx_common_data.h"
> #include "prcm43xx.h"
> +#include "omap_hwmod_common_data.h"
> +
>
> /* IP blocks */
> static struct omap_hwmod am43xx_l4_hs_hwmod = {
> @@ -415,6 +417,70 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
> },
> };
>
> +/* Display sub system - DSS */
> +
> +struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = {
> + .manager_count = 1,
> + .has_framedonetv_irq = 0
> +};
> +
> +
> +static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = {
> + .rev_offs = 0x0000,
> + .sysc_offs = 0x0010,
> + .syss_offs = 0x0014,
> + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
> + .sysc_fields = &omap_hwmod_sysc_type1,
> +};
> +
> +static struct omap_hwmod_class am43xx_dispc_hwmod_class = {
> + .name = "dispc",
> + .sysc = &am43xx_dispc_sysc,
> +};
> +
> +static struct omap_hwmod am43xx_dss_core_hwmod = {
> + .name = "dss_core",
> + .class = &omap2_dss_hwmod_class,
> + .clkdm_name = "dss_clkdm",
> + .main_clk = "disp_clk",
> + .prcm = {
> + .omap4 = {
> + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
> + .modulemode = MODULEMODE_SWCTRL,
> + },
> + },
> +};
> +
> +/* display controller -dispc*/
> +
> +static struct omap_hwmod am43xx_dss_dispc_hwmod = {
> + .name = "dss_dispc",
> + .class = &am43xx_dispc_hwmod_class,
> + .clkdm_name = "dss_clkdm",
> + .main_clk = "disp_clk",
> + .prcm = {
> + .omap4 = {
> + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
> + },
> + },
> + .dev_attr = &am43xx_dss_dispc_dev_attr,
> +};
> +
> +/*RFBI*/
> +
> +static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
> + .name = "dss_rfbi",
> + .class = &omap2_rfbi_hwmod_class,
> + .clkdm_name = "dss_clkdm",
> + .main_clk = "disp_clk",
> + .prcm = {
> + .omap4 = {
> + .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET,
> + },
> + },
> +};
> +
> /* Interfaces */
> static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
> .master = &am33xx_l3_main_hwmod,
> @@ -654,6 +720,34 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
> .user = OCP_USER_MPU | OCP_USER_SDMA,
> };
>
> +static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
> + .master = &am43xx_dss_core_hwmod,
> + .slave = &am33xx_l3_main_hwmod,
> + .clk = "l3_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_core_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_dispc_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> +static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
> + .master = &am33xx_l4_ls_hwmod,
> + .slave = &am43xx_dss_rfbi_hwmod,
> + .clk = "l4ls_gclk",
> + .user = OCP_USER_MPU | OCP_USER_SDMA,
> +};
> +
> static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am33xx_l4_wkup__synctimer,
> &am43xx_l4_ls__timer8,
> @@ -748,6 +842,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
> &am43xx_l4_ls__ocp2scp1,
> &am43xx_l3_s__usbotgss0,
> &am43xx_l3_s__usbotgss1,
> + &am43xx_dss__l3_main,
> + &am43xx_l4_ls__dss,
> + &am43xx_l4_ls__dss_dispc,
> + &am43xx_l4_ls__dss_rfbi,
> NULL,
> };
>
> diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
> index 7785be984edd..ad7b3e9977f8 100644
> --- a/arch/arm/mach-omap2/prcm43xx.h
> +++ b/arch/arm/mach-omap2/prcm43xx.h
> @@ -142,5 +142,6 @@
> #define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET 0x05B8
> #define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET 0x0268
> #define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
> +#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
>
> #endif
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140527/01517c65/attachment-0001.sig>
^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 02/11] ARM: dts: am43xx: add ti,set-rate-parent for disp_clk
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-09 11:56 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel, Tony Lindgren
Cc: Paul Walmsley, Archit Taneja, Sathya Prakash M R, Tomi Valkeinen
From: Sathya Prakash M R <sathyap@ti.com>
disp_clk is a mux-clock, and to set the rate of the parent PLL, we need
ti,set-rate-parent flag.
Add the flag.
Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/am43xx-clocks.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index 142009cc9332..144663ba7739 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -511,6 +511,7 @@
compatible = "ti,mux-clock";
clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
reg = <0x4244>;
+ ti,set-rate-parent;
};
dpll_extdev_ck: dpll_extdev_ck {
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread* [PATCH 02/11] ARM: dts: am43xx: add ti,set-rate-parent for disp_clk
@ 2014-05-09 11:56 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-arm-kernel
From: Sathya Prakash M R <sathyap@ti.com>
disp_clk is a mux-clock, and to set the rate of the parent PLL, we need
ti,set-rate-parent flag.
Add the flag.
Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/am43xx-clocks.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index 142009cc9332..144663ba7739 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -511,6 +511,7 @@
compatible = "ti,mux-clock";
clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
reg = <0x4244>;
+ ti,set-rate-parent;
};
dpll_extdev_ck: dpll_extdev_ck {
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 03/11] ARM: dts: am4372.dtsi: add DSS information
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-09 11:56 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel, Tony Lindgren
Cc: Paul Walmsley, Archit Taneja, Sathya Prakash M R, Tomi Valkeinen
From: Sathya Prakash M R <sathyap@ti.com>
Add DT data for the display subsystem for AM4372. The DSS on AM4372 is
basically OMAP3's DSS, without DSI and VENC blocks.
Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/am4372.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index d1f8707ff1df..8fd413d6d14b 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -735,6 +735,36 @@
#size-cells = <1>;
status = "disabled";
};
+
+ dss: dss@4832a000 {
+ compatible = "ti,omap3-dss";
+ reg = <0x4832a000 0x200>;
+ status = "disabled";
+ ti,hwmods = "dss_core";
+ clocks = <&disp_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dispc@4832a400 {
+ compatible = "ti,omap3-dispc";
+ reg = <0x4832a400 0x400>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dss_dispc";
+ clocks = <&disp_clk>;
+ clock-names = "fck";
+ };
+
+ rfbi: rfbi@4832a800 {
+ compatible = "ti,omap3-rfbi";
+ reg = <0x4832a800 0x100>;
+ ti,hwmods = "dss_rfbi";
+ clocks = <&disp_clk>;
+ clock-names = "fck";
+ };
+
+ };
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread* [PATCH 03/11] ARM: dts: am4372.dtsi: add DSS information
@ 2014-05-09 11:56 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-arm-kernel
From: Sathya Prakash M R <sathyap@ti.com>
Add DT data for the display subsystem for AM4372. The DSS on AM4372 is
basically OMAP3's DSS, without DSI and VENC blocks.
Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/am4372.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index d1f8707ff1df..8fd413d6d14b 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -735,6 +735,36 @@
#size-cells = <1>;
status = "disabled";
};
+
+ dss: dss at 4832a000 {
+ compatible = "ti,omap3-dss";
+ reg = <0x4832a000 0x200>;
+ status = "disabled";
+ ti,hwmods = "dss_core";
+ clocks = <&disp_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dispc at 4832a400 {
+ compatible = "ti,omap3-dispc";
+ reg = <0x4832a400 0x400>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dss_dispc";
+ clocks = <&disp_clk>;
+ clock-names = "fck";
+ };
+
+ rfbi: rfbi at 4832a800 {
+ compatible = "ti,omap3-rfbi";
+ reg = <0x4832a800 0x100>;
+ ti,hwmods = "dss_rfbi";
+ clocks = <&disp_clk>;
+ clock-names = "fck";
+ };
+
+ };
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 04/11] ARM: dts: am437x-gp-evm: add LCD data
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-09 11:56 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel, Tony Lindgren
Cc: Paul Walmsley, Archit Taneja, Sathya Prakash M R, Tomi Valkeinen
From: Sathya Prakash M R <sathyap@ti.com>
Add DT data for am437x-gp-evm's LCD panel.
Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 97 +++++++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index df8798e8bd25..350e896a0d89 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -53,6 +53,48 @@
0x02000069 /* LEFT */
0x0201006c>; /* DOWN */
};
+
+ aliases {
+ display0 = &lcd0;
+ };
+
+ lcd0: display {
+ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ /*
+ * SelLCDorHDMI, LOW to select HDMI. This is not really the
+ * panel's enable GPIO, but we don't have HDMI driver support nor
+ * support to switch between two displays, so using this gpio as
+ * panel's enable should be safe.
+ */
+ enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+
+ panel-timing {
+ clock-frequency = <33000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <210>;
+ hback-porch = <16>;
+ hsync-len = <30>;
+ vback-porch = <10>;
+ vfront-porch = <22>;
+ vsync-len = <13>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
};
&am43xx_pinmux {
@@ -81,6 +123,47 @@
0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
>;
};
+
+ dss_pins: dss_pins {
+ pinctrl-single,pins = <
+ 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+ 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+ 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+ >;
+ };
+
+ lcd_pins: lcd_pins {
+ pinctrl-single,pins = <
+ /* GPIO 5_8 to select LCD / HDMI */
+ 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
};
&i2c0 {
@@ -125,3 +208,17 @@
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_pins>;
+
+ port {
+ dpi_out: endpoint@0 {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread* [PATCH 04/11] ARM: dts: am437x-gp-evm: add LCD data
@ 2014-05-09 11:56 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-arm-kernel
From: Sathya Prakash M R <sathyap@ti.com>
Add DT data for am437x-gp-evm's LCD panel.
Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 97 +++++++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index df8798e8bd25..350e896a0d89 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -53,6 +53,48 @@
0x02000069 /* LEFT */
0x0201006c>; /* DOWN */
};
+
+ aliases {
+ display0 = &lcd0;
+ };
+
+ lcd0: display {
+ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ /*
+ * SelLCDorHDMI, LOW to select HDMI. This is not really the
+ * panel's enable GPIO, but we don't have HDMI driver support nor
+ * support to switch between two displays, so using this gpio as
+ * panel's enable should be safe.
+ */
+ enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+
+ panel-timing {
+ clock-frequency = <33000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <210>;
+ hback-porch = <16>;
+ hsync-len = <30>;
+ vback-porch = <10>;
+ vfront-porch = <22>;
+ vsync-len = <13>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
};
&am43xx_pinmux {
@@ -81,6 +123,47 @@
0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
>;
};
+
+ dss_pins: dss_pins {
+ pinctrl-single,pins = <
+ 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+ 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+ 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+ >;
+ };
+
+ lcd_pins: lcd_pins {
+ pinctrl-single,pins = <
+ /* GPIO 5_8 to select LCD / HDMI */
+ 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
};
&i2c0 {
@@ -125,3 +208,17 @@
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_pins>;
+
+ port {
+ dpi_out: endpoint at 0 {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 05/11] ARM: dts: am43x-epos-evm: add LCD data
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-09 11:56 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel, Tony Lindgren
Cc: Paul Walmsley, Archit Taneja, Tomi Valkeinen
Add DT data for am43x-epos-evm's LCD panel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/am43x-epos-evm.dts | 101 +++++++++++++++++++++++++++++++++++
1 file changed, 101 insertions(+)
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 167dbc8494de..9aa5af71f96f 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -19,6 +19,10 @@
model = "TI AM43x EPOS EVM";
compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+ aliases {
+ display0 = &lcd0;
+ };
+
vmmcsd_fixed: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
@@ -27,6 +31,44 @@
enable-active-high;
};
+ lcd0: display {
+ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ /*
+ * SelLCDorHDMI, LOW to select HDMI. This is not really the
+ * panel's enable GPIO, but we don't have HDMI driver support nor
+ * support to switch between two displays, so using this gpio as
+ * panel's enable should be safe.
+ */
+ enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+ panel-timing {
+ clock-frequency = <33000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <210>;
+ hback-porch = <16>;
+ hsync-len = <30>;
+ vback-porch = <10>;
+ vfront-porch = <22>;
+ vsync-len = <13>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
am43xx_pinmux: pinmux@44e10800 {
cpsw_default: cpsw_default {
pinctrl-single,pins = <
@@ -138,6 +180,46 @@
0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
+
+ dss_pins: dss_pins {
+ pinctrl-single,pins = <
+ 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+ 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+ 0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ 0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ 0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ 0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ 0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ 0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+ >;
+ };
+
+ lcd_pins: lcd_pins {
+ pinctrl-single,pins = <
+ /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
+ 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
};
matrix_keypad: matrix_keypad@0 {
@@ -260,6 +342,10 @@
status = "okay";
};
+&gpio5 {
+ status = "okay";
+};
+
&elm {
status = "okay";
};
@@ -367,3 +453,18 @@
pinctrl-0 = <&spi1_pins>;
status = "okay";
};
+
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_pins>;
+
+ port {
+ dpi_out: endpoint@0 {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread* [PATCH 05/11] ARM: dts: am43x-epos-evm: add LCD data
@ 2014-05-09 11:56 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-arm-kernel
Add DT data for am43x-epos-evm's LCD panel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/am43x-epos-evm.dts | 101 +++++++++++++++++++++++++++++++++++
1 file changed, 101 insertions(+)
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 167dbc8494de..9aa5af71f96f 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -19,6 +19,10 @@
model = "TI AM43x EPOS EVM";
compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+ aliases {
+ display0 = &lcd0;
+ };
+
vmmcsd_fixed: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
@@ -27,6 +31,44 @@
enable-active-high;
};
+ lcd0: display {
+ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ /*
+ * SelLCDorHDMI, LOW to select HDMI. This is not really the
+ * panel's enable GPIO, but we don't have HDMI driver support nor
+ * support to switch between two displays, so using this gpio as
+ * panel's enable should be safe.
+ */
+ enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+ panel-timing {
+ clock-frequency = <33000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <210>;
+ hback-porch = <16>;
+ hsync-len = <30>;
+ vback-porch = <10>;
+ vfront-porch = <22>;
+ vsync-len = <13>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
am43xx_pinmux: pinmux at 44e10800 {
cpsw_default: cpsw_default {
pinctrl-single,pins = <
@@ -138,6 +180,46 @@
0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
+
+ dss_pins: dss_pins {
+ pinctrl-single,pins = <
+ 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+ 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+ 0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ 0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ 0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ 0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ 0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ 0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+ >;
+ };
+
+ lcd_pins: lcd_pins {
+ pinctrl-single,pins = <
+ /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
+ 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
};
matrix_keypad: matrix_keypad at 0 {
@@ -260,6 +342,10 @@
status = "okay";
};
+&gpio5 {
+ status = "okay";
+};
+
&elm {
status = "okay";
};
@@ -367,3 +453,18 @@
pinctrl-0 = <&spi1_pins>;
status = "okay";
};
+
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_pins>;
+
+ port {
+ dpi_out: endpoint at 0 {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 06/11] ARM: OMAP2+: hwmod: OMAP5 DSS hwmod data
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-09 11:56 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel, Tony Lindgren
Cc: Paul Walmsley, Archit Taneja, Tomi Valkeinen
From: Archit Taneja <archit@ti.com>
Add hwmod data for dss core, dispc dsi1, dsi2, rfbi and hdmi. It's more
or less similar to omap4 hwmod data.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 283 +++++++++++++++++++++++++++++
1 file changed, 283 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 892317294fdc..e8bdd7a91090 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -334,6 +334,235 @@ static struct omap_hwmod omap54xx_dmic_hwmod = {
};
/*
+ * 'dss' class
+ * display sub-system
+ */
+static struct omap_hwmod_class_sysconfig omap54xx_dss_sysc = {
+ .rev_offs = 0x0000,
+ .syss_offs = 0x0014,
+ .sysc_flags = SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class omap54xx_dss_hwmod_class = {
+ .name = "dss",
+ .sysc = &omap54xx_dss_sysc,
+ .reset = omap_dss_reset,
+};
+
+/* dss */
+static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+ { .role = "32khz_clk", .clk = "dss_32khz_clk" },
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+ { .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_hwmod = {
+ .name = "dss_core",
+ .class = &omap54xx_dss_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .main_clk = "dss_dss_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .context_offs = OMAP54XX_RM_DSS_DSS_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .opt_clks = dss_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
+};
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap54xx_dispc_sysc,
+};
+
+/* dss_dispc */
+static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+/* dss_dispc dev_attr */
+static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = {
+ .has_framedonetv_irq = 1,
+ .manager_count = 4,
+};
+
+static struct omap_hwmod omap54xx_dss_dispc_hwmod = {
+ .name = "dss_dispc",
+ .class = &omap54xx_dispc_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "dss_dss_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_dispc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
+ .dev_attr = &dss_dispc_dev_attr,
+};
+
+/*
+ * 'dsi1' class
+ * display serial interface controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_dsi1_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_dsi1_hwmod_class = {
+ .name = "dsi1",
+ .sysc = &omap54xx_dsi1_sysc,
+};
+
+/* dss_dsi1_a */
+static struct omap_hwmod_opt_clk dss_dsi1_a_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = {
+ .name = "dss_dsi1",
+ .class = &omap54xx_dsi1_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "dss_dss_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_dsi1_a_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_a_opt_clks),
+};
+
+/* dss_dsi1_c */
+static struct omap_hwmod_opt_clk dss_dsi1_c_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = {
+ .name = "dss_dsi2",
+ .class = &omap54xx_dsi1_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "dss_dss_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_dsi1_c_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_c_opt_clks),
+};
+
+/*
+ * 'hdmi' class
+ * hdmi controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_hdmi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_hdmi_hwmod_class = {
+ .name = "hdmi",
+ .sysc = &omap54xx_hdmi_sysc,
+};
+
+static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_hdmi_hwmod = {
+ .name = "dss_hdmi",
+ .class = &omap54xx_hdmi_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "dss_48mhz_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_hdmi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
+};
+
+/*
+ * 'rfbi' class
+ * remote frame buffer interface
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_rfbi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_rfbi_hwmod_class = {
+ .name = "rfbi",
+ .sysc = &omap54xx_rfbi_sysc,
+};
+
+/* dss_rfbi */
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "l3_iclk_div" },
+};
+
+static struct omap_hwmod omap54xx_dss_rfbi_hwmod = {
+ .name = "dss_rfbi",
+ .class = &omap54xx_rfbi_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
+};
+
+/*
* 'emif' class
* external memory interface no1 (wrapper)
*/
@@ -1974,6 +2203,54 @@ static struct omap_hwmod_ocp_if omap54xx_l4_abe__dmic = {
.user = OCP_USER_MPU,
};
+/* l3_main_2 -> dss */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_dispc */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dispc = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_dispc_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_dsi1_a */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_a = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_dsi1_a_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_dsi1_c */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_c = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_dsi1_c_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_hdmi */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_hdmi = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_hdmi_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_rfbi */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_rfbi = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_rfbi_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* mpu -> emif1 */
static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = {
.master = &omap54xx_mpu_hwmod,
@@ -2427,6 +2704,12 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l4_cfg__dma_system,
&omap54xx_l4_abe__dmic,
&omap54xx_l4_cfg__mmu_dsp,
+ &omap54xx_l3_main_2__dss,
+ &omap54xx_l3_main_2__dss_dispc,
+ &omap54xx_l3_main_2__dss_dsi1_a,
+ &omap54xx_l3_main_2__dss_dsi1_c,
+ &omap54xx_l3_main_2__dss_hdmi,
+ &omap54xx_l3_main_2__dss_rfbi,
&omap54xx_mpu__emif1,
&omap54xx_mpu__emif2,
&omap54xx_l4_wkup__gpio1,
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread* [PATCH 06/11] ARM: OMAP2+: hwmod: OMAP5 DSS hwmod data
@ 2014-05-09 11:56 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-arm-kernel
From: Archit Taneja <archit@ti.com>
Add hwmod data for dss core, dispc dsi1, dsi2, rfbi and hdmi. It's more
or less similar to omap4 hwmod data.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 283 +++++++++++++++++++++++++++++
1 file changed, 283 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 892317294fdc..e8bdd7a91090 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -334,6 +334,235 @@ static struct omap_hwmod omap54xx_dmic_hwmod = {
};
/*
+ * 'dss' class
+ * display sub-system
+ */
+static struct omap_hwmod_class_sysconfig omap54xx_dss_sysc = {
+ .rev_offs = 0x0000,
+ .syss_offs = 0x0014,
+ .sysc_flags = SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class omap54xx_dss_hwmod_class = {
+ .name = "dss",
+ .sysc = &omap54xx_dss_sysc,
+ .reset = omap_dss_reset,
+};
+
+/* dss */
+static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+ { .role = "32khz_clk", .clk = "dss_32khz_clk" },
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+ { .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_hwmod = {
+ .name = "dss_core",
+ .class = &omap54xx_dss_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .main_clk = "dss_dss_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .context_offs = OMAP54XX_RM_DSS_DSS_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .opt_clks = dss_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
+};
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap54xx_dispc_sysc,
+};
+
+/* dss_dispc */
+static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+/* dss_dispc dev_attr */
+static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = {
+ .has_framedonetv_irq = 1,
+ .manager_count = 4,
+};
+
+static struct omap_hwmod omap54xx_dss_dispc_hwmod = {
+ .name = "dss_dispc",
+ .class = &omap54xx_dispc_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "dss_dss_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_dispc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
+ .dev_attr = &dss_dispc_dev_attr,
+};
+
+/*
+ * 'dsi1' class
+ * display serial interface controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_dsi1_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_dsi1_hwmod_class = {
+ .name = "dsi1",
+ .sysc = &omap54xx_dsi1_sysc,
+};
+
+/* dss_dsi1_a */
+static struct omap_hwmod_opt_clk dss_dsi1_a_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = {
+ .name = "dss_dsi1",
+ .class = &omap54xx_dsi1_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "dss_dss_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_dsi1_a_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_a_opt_clks),
+};
+
+/* dss_dsi1_c */
+static struct omap_hwmod_opt_clk dss_dsi1_c_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = {
+ .name = "dss_dsi2",
+ .class = &omap54xx_dsi1_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "dss_dss_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_dsi1_c_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_c_opt_clks),
+};
+
+/*
+ * 'hdmi' class
+ * hdmi controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_hdmi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_hdmi_hwmod_class = {
+ .name = "hdmi",
+ .sysc = &omap54xx_hdmi_sysc,
+};
+
+static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
+static struct omap_hwmod omap54xx_dss_hdmi_hwmod = {
+ .name = "dss_hdmi",
+ .class = &omap54xx_hdmi_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .main_clk = "dss_48mhz_clk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_hdmi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
+};
+
+/*
+ * 'rfbi' class
+ * remote frame buffer interface
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_rfbi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_rfbi_hwmod_class = {
+ .name = "rfbi",
+ .sysc = &omap54xx_rfbi_sysc,
+};
+
+/* dss_rfbi */
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "l3_iclk_div" },
+};
+
+static struct omap_hwmod omap54xx_dss_rfbi_hwmod = {
+ .name = "dss_rfbi",
+ .class = &omap54xx_rfbi_hwmod_class,
+ .clkdm_name = "dss_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+ .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+ },
+ },
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
+};
+
+/*
* 'emif' class
* external memory interface no1 (wrapper)
*/
@@ -1974,6 +2203,54 @@ static struct omap_hwmod_ocp_if omap54xx_l4_abe__dmic = {
.user = OCP_USER_MPU,
};
+/* l3_main_2 -> dss */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_dispc */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dispc = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_dispc_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_dsi1_a */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_a = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_dsi1_a_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_dsi1_c */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_c = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_dsi1_c_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_hdmi */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_hdmi = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_hdmi_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> dss_rfbi */
+static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_rfbi = {
+ .master = &omap54xx_l3_main_2_hwmod,
+ .slave = &omap54xx_dss_rfbi_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* mpu -> emif1 */
static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = {
.master = &omap54xx_mpu_hwmod,
@@ -2427,6 +2704,12 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l4_cfg__dma_system,
&omap54xx_l4_abe__dmic,
&omap54xx_l4_cfg__mmu_dsp,
+ &omap54xx_l3_main_2__dss,
+ &omap54xx_l3_main_2__dss_dispc,
+ &omap54xx_l3_main_2__dss_dsi1_a,
+ &omap54xx_l3_main_2__dss_dsi1_c,
+ &omap54xx_l3_main_2__dss_hdmi,
+ &omap54xx_l3_main_2__dss_rfbi,
&omap54xx_mpu__emif1,
&omap54xx_mpu__emif2,
&omap54xx_l4_wkup__gpio1,
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 07/11] ARM: dts: omap5-clocks.dtsi: add dss iclk
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-09 11:56 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel, Tony Lindgren
Cc: Paul Walmsley, Archit Taneja, Tomi Valkeinen
Add missing DSS interface clock node.
Note: The TRM says DSS's interface clock is DSS_L3_GICLK, but it is not
clear to me from reading the TRM and looking at the
arch/arm/boot/dts/omap54xx-clocks.dtsi whether using 'l3_iclk_div' as
the parent for 'dss_l3_iclk' is the correct clock.
The clock is explicitly used only by the RFBI, and we don't have any
boards using the RFBI, so I have no means to test it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap54xx-clocks.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index d487fdab3921..26c02f9e92c4 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -418,6 +418,14 @@
clock-div = <1>;
};
+ dss_l3_iclk: dss_l3_iclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&l3_iclk_div>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
slimbus1_slimbus_clk: slimbus1_slimbus_clk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread* [PATCH 07/11] ARM: dts: omap5-clocks.dtsi: add dss iclk
@ 2014-05-09 11:56 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-arm-kernel
Add missing DSS interface clock node.
Note: The TRM says DSS's interface clock is DSS_L3_GICLK, but it is not
clear to me from reading the TRM and looking at the
arch/arm/boot/dts/omap54xx-clocks.dtsi whether using 'l3_iclk_div' as
the parent for 'dss_l3_iclk' is the correct clock.
The clock is explicitly used only by the RFBI, and we don't have any
boards using the RFBI, so I have no means to test it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap54xx-clocks.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index d487fdab3921..26c02f9e92c4 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -418,6 +418,14 @@
clock-div = <1>;
};
+ dss_l3_iclk: dss_l3_iclk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&l3_iclk_div>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
slimbus1_slimbus_clk: slimbus1_slimbus_clk {
#clock-cells = <0>;
compatible = "ti,gate-clock";
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 08/11] ARM: dts: omap5-clocks.dtsi: add ti,set-rate-parent to dss_dss_clk
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-09 11:56 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel, Tony Lindgren
Cc: Paul Walmsley, Archit Taneja, Tomi Valkeinen
Add ti,set-rate-parent to dss_dss_clk so that the DSS driver can
set the rate.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap54xx-clocks.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index 26c02f9e92c4..b53ca885c021 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -859,6 +859,7 @@
clocks = <&dpll_per_h12x2_ck>;
ti,bit-shift = <8>;
reg = <0x1420>;
+ ti,set-rate-parent;
};
dss_sys_clk: dss_sys_clk {
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread* [PATCH 08/11] ARM: dts: omap5-clocks.dtsi: add ti, set-rate-parent to dss_dss_clk
@ 2014-05-09 11:56 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-arm-kernel
Add ti,set-rate-parent to dss_dss_clk so that the DSS driver can
set the rate.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap54xx-clocks.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index 26c02f9e92c4..b53ca885c021 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -859,6 +859,7 @@
clocks = <&dpll_per_h12x2_ck>;
ti,bit-shift = <8>;
reg = <0x1420>;
+ ti,set-rate-parent;
};
dss_sys_clk: dss_sys_clk {
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 09/11] ARM: dts: omap5.dtsi: add DSS nodes
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-09 11:56 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel, Tony Lindgren
Cc: Paul Walmsley, Archit Taneja, Tomi Valkeinen
Add OMAP5 DSS nodes to omap5.dtsi.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 70 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index f8c9855ce587..32c02cefa9a6 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -869,6 +869,76 @@
#thermal-sensor-cells = <1>;
};
+
+ dss: dss@58000000 {
+ compatible = "ti,omap5-dss";
+ reg = <0x58000000 0x80>;
+ status = "disabled";
+ ti,hwmods = "dss_core";
+ clocks = <&dss_dss_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dispc@58001000 {
+ compatible = "ti,omap5-dispc";
+ reg = <0x58001000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dss_dispc";
+ clocks = <&dss_dss_clk>;
+ clock-names = "fck";
+ };
+
+ rfbi: encoder@58002000 {
+ compatible = "ti,omap5-rfbi";
+ reg = <0x58002000 0x100>;
+ status = "disabled";
+ ti,hwmods = "dss_rfbi";
+ clocks = <&dss_dss_clk>, <&dss_l3_iclk>;
+ clock-names = "fck", "ick";
+ };
+
+ dsi1: encoder@58004000 {
+ compatible = "ti,omap5-dsi";
+ reg = <0x58004000 0x200>,
+ <0x58004200 0x40>,
+ <0x58004300 0x40>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ ti,hwmods = "dss_dsi1";
+ clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+ clock-names = "fck", "sys_clk";
+ };
+
+ dsi2: encoder@58005000 {
+ compatible = "ti,omap5-dsi";
+ reg = <0x58009000 0x200>,
+ <0x58009200 0x40>,
+ <0x58009300 0x40>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ ti,hwmods = "dss_dsi2";
+ clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+ clock-names = "fck", "sys_clk";
+ };
+
+ hdmi: encoder@58060000 {
+ compatible = "ti,omap5-hdmi";
+ reg = <0x58040000 0x400>,
+ <0x58040200 0x80>,
+ <0x58040300 0x80>,
+ <0x58060000 0x19000>;
+ reg-names = "wp", "pll", "phy", "core";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ ti,hwmods = "dss_hdmi";
+ clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+ clock-names = "fck", "sys_clk";
+ };
+ };
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread* [PATCH 09/11] ARM: dts: omap5.dtsi: add DSS nodes
@ 2014-05-09 11:56 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-arm-kernel
Add OMAP5 DSS nodes to omap5.dtsi.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 70 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index f8c9855ce587..32c02cefa9a6 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -869,6 +869,76 @@
#thermal-sensor-cells = <1>;
};
+
+ dss: dss at 58000000 {
+ compatible = "ti,omap5-dss";
+ reg = <0x58000000 0x80>;
+ status = "disabled";
+ ti,hwmods = "dss_core";
+ clocks = <&dss_dss_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dispc at 58001000 {
+ compatible = "ti,omap5-dispc";
+ reg = <0x58001000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dss_dispc";
+ clocks = <&dss_dss_clk>;
+ clock-names = "fck";
+ };
+
+ rfbi: encoder at 58002000 {
+ compatible = "ti,omap5-rfbi";
+ reg = <0x58002000 0x100>;
+ status = "disabled";
+ ti,hwmods = "dss_rfbi";
+ clocks = <&dss_dss_clk>, <&dss_l3_iclk>;
+ clock-names = "fck", "ick";
+ };
+
+ dsi1: encoder at 58004000 {
+ compatible = "ti,omap5-dsi";
+ reg = <0x58004000 0x200>,
+ <0x58004200 0x40>,
+ <0x58004300 0x40>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ ti,hwmods = "dss_dsi1";
+ clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+ clock-names = "fck", "sys_clk";
+ };
+
+ dsi2: encoder at 58005000 {
+ compatible = "ti,omap5-dsi";
+ reg = <0x58009000 0x200>,
+ <0x58009200 0x40>,
+ <0x58009300 0x40>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ ti,hwmods = "dss_dsi2";
+ clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+ clock-names = "fck", "sys_clk";
+ };
+
+ hdmi: encoder at 58060000 {
+ compatible = "ti,omap5-hdmi";
+ reg = <0x58040000 0x400>,
+ <0x58040200 0x80>,
+ <0x58040300 0x80>,
+ <0x58060000 0x19000>;
+ reg-names = "wp", "pll", "phy", "core";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ ti,hwmods = "dss_hdmi";
+ clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+ clock-names = "fck", "sys_clk";
+ };
+ };
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 10/11] ARM: dts: omap5-uevm.dts: add tca6424a
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-09 11:56 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel, Tony Lindgren
Cc: Paul Walmsley, Archit Taneja, Tomi Valkeinen
omap5-uevm has a tca6424a I/O expander. Add it to the .dts file.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 3b99ec25b748..76877516f6df 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -434,6 +434,13 @@
pinctrl-0 = <&i2c5_pins>;
clock-frequency = <400000>;
+
+ gpio9: gpio@22 {
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
&mcbsp3 {
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread* [PATCH 10/11] ARM: dts: omap5-uevm.dts: add tca6424a
@ 2014-05-09 11:56 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-arm-kernel
omap5-uevm has a tca6424a I/O expander. Add it to the .dts file.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 3b99ec25b748..76877516f6df 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -434,6 +434,13 @@
pinctrl-0 = <&i2c5_pins>;
clock-frequency = <400000>;
+
+ gpio9: gpio at 22 {
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
&mcbsp3 {
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread
* [PATCH 11/11] ARM: dts: omap5-uevm.dts: add display nodes
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-09 11:56 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel, Tony Lindgren
Cc: Paul Walmsley, Archit Taneja, Tomi Valkeinen
omap5-uevm has a single HDMI output. Add the necessary display
information, including pinmuxing.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 82 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 76877516f6df..9ffbe71b88c3 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -183,6 +183,19 @@
>;
};
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
+ 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
+ >;
+ };
+
+ tpd12s015_pins: pinmux_tpd12s015_pins {
+ pinctrl-single,pins = <
+ 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
+ >;
+ };
};
&omap5_pmx_wkup {
@@ -498,3 +511,72 @@
&cpu0 {
cpu0-supply = <&smps123_reg>;
};
+
+/ {
+ aliases {
+ display0 = &hdmi0;
+ };
+
+ tpd12s015: encoder@0 {
+ compatible = "ti,tpd12s015";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpd12s015_pins>;
+
+ gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */
+ <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
+ <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint@0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint@0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector@0 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "b";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+};
+
+&dss {
+ status = "ok";
+};
+
+&hdmi {
+ status = "ok";
+ vdda-supply = <&ldo4_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread* [PATCH 11/11] ARM: dts: omap5-uevm.dts: add display nodes
@ 2014-05-09 11:56 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-09 11:56 UTC (permalink / raw)
To: linux-arm-kernel
omap5-uevm has a single HDMI output. Add the necessary display
information, including pinmuxing.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 82 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 76877516f6df..9ffbe71b88c3 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -183,6 +183,19 @@
>;
};
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
+ 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
+ >;
+ };
+
+ tpd12s015_pins: pinmux_tpd12s015_pins {
+ pinctrl-single,pins = <
+ 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
+ >;
+ };
};
&omap5_pmx_wkup {
@@ -498,3 +511,72 @@
&cpu0 {
cpu0-supply = <&smps123_reg>;
};
+
+/ {
+ aliases {
+ display0 = &hdmi0;
+ };
+
+ tpd12s015: encoder at 0 {
+ compatible = "ti,tpd12s015";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpd12s015_pins>;
+
+ gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */
+ <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
+ <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint at 0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint at 0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector at 0 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "b";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+};
+
+&dss {
+ status = "ok";
+};
+
+&hdmi {
+ status = "ok";
+ vdda-supply = <&ldo4_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 52+ messages in thread
* Re: [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
2014-05-09 11:56 ` Tomi Valkeinen
@ 2014-05-12 13:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-12 13:25 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, linux-arm-kernel, Paul Walmsley, Archit Taneja
[-- Attachment #1: Type: text/plain, Size: 1035 bytes --]
Hi Tony,
On 09/05/14 14:56, Tomi Valkeinen wrote:
> Hi,
>
> Here are arch/arm/ patches to add display support for OMAP5 and AM43x.
>
> I have these in my tree, in a branch I will send to Tony for merging. Most of
> these patches have already been around the lists, but I wanted to send them one
> more time to verify that all looks right and everybody is fine with them.
I have pushed these to:
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git 3.16/omap
If you're fine with these, I think we can consider that branch stable.
There are probably still a few display related .dts changed for the
board coming up, but I'll add those on top of the current commits.
I also have pushed OMAP5 and AM43xx related OMAPDSS patches to my
for-next branch, so with "3.16/omap" branch and linux-next, the omap5
and am43xx displays should be functional.
How do you want to handle getting the 3.16/omap branch to linux-next?
Will you take "ownership" of the branch, and push it to linux-next?
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
@ 2014-05-12 13:25 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-12 13:25 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tony,
On 09/05/14 14:56, Tomi Valkeinen wrote:
> Hi,
>
> Here are arch/arm/ patches to add display support for OMAP5 and AM43x.
>
> I have these in my tree, in a branch I will send to Tony for merging. Most of
> these patches have already been around the lists, but I wanted to send them one
> more time to verify that all looks right and everybody is fine with them.
I have pushed these to:
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git 3.16/omap
If you're fine with these, I think we can consider that branch stable.
There are probably still a few display related .dts changed for the
board coming up, but I'll add those on top of the current commits.
I also have pushed OMAP5 and AM43xx related OMAPDSS patches to my
for-next branch, so with "3.16/omap" branch and linux-next, the omap5
and am43xx displays should be functional.
How do you want to handle getting the 3.16/omap branch to linux-next?
Will you take "ownership" of the branch, and push it to linux-next?
Tomi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140512/0e26df26/attachment.sig>
^ permalink raw reply [flat|nested] 52+ messages in thread
* Re: [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
2014-05-12 13:25 ` Tomi Valkeinen
@ 2014-05-12 14:36 ` Tony Lindgren
-1 siblings, 0 replies; 52+ messages in thread
From: Tony Lindgren @ 2014-05-12 14:36 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: linux-omap, linux-arm-kernel, Paul Walmsley, Archit Taneja, Tero Kristo
* Tomi Valkeinen <tomi.valkeinen@ti.com> [140512 06:26]:
> Hi Tony,
>
> On 09/05/14 14:56, Tomi Valkeinen wrote:
> > Hi,
> >
> > Here are arch/arm/ patches to add display support for OMAP5 and AM43x.
> >
> > I have these in my tree, in a branch I will send to Tony for merging. Most of
> > these patches have already been around the lists, but I wanted to send them one
> > more time to verify that all looks right and everybody is fine with them.
>
> I have pushed these to:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git 3.16/omap
>
> If you're fine with these, I think we can consider that branch stable.
> There are probably still a few display related .dts changed for the
> board coming up, but I'll add those on top of the current commits.
Please coordinate things with Paul and Tero so you at least have proper
acks for the hwmod and and clock patches. In general we really want to
queue hwmod and clock changes separately as those can easily mess up things
in a bad way like we've already seen with overlapping hwmod entries in
the .dts files.
Also, I'm wondering why we still have .clk and .opt_clks entries in the
hwmod data for am43xx and omap5 which are both device tree based with
all the clocks coming from .dts files?
> I also have pushed OMAP5 and AM43xx related OMAPDSS patches to my
> for-next branch, so with "3.16/omap" branch and linux-next, the omap5
> and am43xx displays should be functional.
The panel parts look OK to me no problem.
> How do you want to handle getting the 3.16/omap branch to linux-next?
> Will you take "ownership" of the branch, and push it to linux-next?
Ideally we'd have small topic branches of clock changes, hwmod changes
and .dts changes that we can all merge in as needed.
Regards,
Tony
^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
@ 2014-05-12 14:36 ` Tony Lindgren
0 siblings, 0 replies; 52+ messages in thread
From: Tony Lindgren @ 2014-05-12 14:36 UTC (permalink / raw)
To: linux-arm-kernel
* Tomi Valkeinen <tomi.valkeinen@ti.com> [140512 06:26]:
> Hi Tony,
>
> On 09/05/14 14:56, Tomi Valkeinen wrote:
> > Hi,
> >
> > Here are arch/arm/ patches to add display support for OMAP5 and AM43x.
> >
> > I have these in my tree, in a branch I will send to Tony for merging. Most of
> > these patches have already been around the lists, but I wanted to send them one
> > more time to verify that all looks right and everybody is fine with them.
>
> I have pushed these to:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git 3.16/omap
>
> If you're fine with these, I think we can consider that branch stable.
> There are probably still a few display related .dts changed for the
> board coming up, but I'll add those on top of the current commits.
Please coordinate things with Paul and Tero so you at least have proper
acks for the hwmod and and clock patches. In general we really want to
queue hwmod and clock changes separately as those can easily mess up things
in a bad way like we've already seen with overlapping hwmod entries in
the .dts files.
Also, I'm wondering why we still have .clk and .opt_clks entries in the
hwmod data for am43xx and omap5 which are both device tree based with
all the clocks coming from .dts files?
> I also have pushed OMAP5 and AM43xx related OMAPDSS patches to my
> for-next branch, so with "3.16/omap" branch and linux-next, the omap5
> and am43xx displays should be functional.
The panel parts look OK to me no problem.
> How do you want to handle getting the 3.16/omap branch to linux-next?
> Will you take "ownership" of the branch, and push it to linux-next?
Ideally we'd have small topic branches of clock changes, hwmod changes
and .dts changes that we can all merge in as needed.
Regards,
Tony
^ permalink raw reply [flat|nested] 52+ messages in thread
* Re: [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
2014-05-12 14:36 ` Tony Lindgren
@ 2014-05-12 14:57 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-12 14:57 UTC (permalink / raw)
To: Tony Lindgren
Cc: linux-omap, linux-arm-kernel, Paul Walmsley, Archit Taneja, Tero Kristo
[-- Attachment #1: Type: text/plain, Size: 1714 bytes --]
On 12/05/14 17:36, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen@ti.com> [140512 06:26]:
>> Hi Tony,
>>
>> On 09/05/14 14:56, Tomi Valkeinen wrote:
>>> Hi,
>>>
>>> Here are arch/arm/ patches to add display support for OMAP5 and AM43x.
>>>
>>> I have these in my tree, in a branch I will send to Tony for merging. Most of
>>> these patches have already been around the lists, but I wanted to send them one
>>> more time to verify that all looks right and everybody is fine with them.
>>
>> I have pushed these to:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git 3.16/omap
>>
>> If you're fine with these, I think we can consider that branch stable.
>> There are probably still a few display related .dts changed for the
>> board coming up, but I'll add those on top of the current commits.
>
> Please coordinate things with Paul and Tero so you at least have proper
> acks for the hwmod and and clock patches. In general we really want to
> queue hwmod and clock changes separately as those can easily mess up things
> in a bad way like we've already seen with overlapping hwmod entries in
> the .dts files.
Ok. I'm fine with splitting the series if that's easiest way to manage it.
Paul, Tero?
> Also, I'm wondering why we still have .clk and .opt_clks entries in the
> hwmod data for am43xx and omap5 which are both device tree based with
> all the clocks coming from .dts files?
I think they are needed for the omap_device/hwmod stuff to work. Only
omapdss driver knows about the clocks defined in the .dts files, and the
omap_device/hwmod code still needs to do the reset and maybe some other
tasks that require the clocks.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
@ 2014-05-12 14:57 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-12 14:57 UTC (permalink / raw)
To: linux-arm-kernel
On 12/05/14 17:36, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen@ti.com> [140512 06:26]:
>> Hi Tony,
>>
>> On 09/05/14 14:56, Tomi Valkeinen wrote:
>>> Hi,
>>>
>>> Here are arch/arm/ patches to add display support for OMAP5 and AM43x.
>>>
>>> I have these in my tree, in a branch I will send to Tony for merging. Most of
>>> these patches have already been around the lists, but I wanted to send them one
>>> more time to verify that all looks right and everybody is fine with them.
>>
>> I have pushed these to:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git 3.16/omap
>>
>> If you're fine with these, I think we can consider that branch stable.
>> There are probably still a few display related .dts changed for the
>> board coming up, but I'll add those on top of the current commits.
>
> Please coordinate things with Paul and Tero so you at least have proper
> acks for the hwmod and and clock patches. In general we really want to
> queue hwmod and clock changes separately as those can easily mess up things
> in a bad way like we've already seen with overlapping hwmod entries in
> the .dts files.
Ok. I'm fine with splitting the series if that's easiest way to manage it.
Paul, Tero?
> Also, I'm wondering why we still have .clk and .opt_clks entries in the
> hwmod data for am43xx and omap5 which are both device tree based with
> all the clocks coming from .dts files?
I think they are needed for the omap_device/hwmod stuff to work. Only
omapdss driver knows about the clocks defined in the .dts files, and the
omap_device/hwmod code still needs to do the reset and maybe some other
tasks that require the clocks.
Tomi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140512/b1850739/attachment.sig>
^ permalink raw reply [flat|nested] 52+ messages in thread
* Re: [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
2014-05-12 14:57 ` Tomi Valkeinen
@ 2014-05-12 15:48 ` Tony Lindgren
-1 siblings, 0 replies; 52+ messages in thread
From: Tony Lindgren @ 2014-05-12 15:48 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: linux-omap, linux-arm-kernel, Paul Walmsley, Archit Taneja, Tero Kristo
* Tomi Valkeinen <tomi.valkeinen@ti.com> [140512 07:58]:
> On 12/05/14 17:36, Tony Lindgren wrote:
> > * Tomi Valkeinen <tomi.valkeinen@ti.com> [140512 06:26]:
> >> Hi Tony,
> >>
> >> On 09/05/14 14:56, Tomi Valkeinen wrote:
> >>> Hi,
> >>>
> >>> Here are arch/arm/ patches to add display support for OMAP5 and AM43x.
> >>>
> >>> I have these in my tree, in a branch I will send to Tony for merging. Most of
> >>> these patches have already been around the lists, but I wanted to send them one
> >>> more time to verify that all looks right and everybody is fine with them.
> >>
> >> I have pushed these to:
> >>
> >> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git 3.16/omap
> >>
> >> If you're fine with these, I think we can consider that branch stable.
> >> There are probably still a few display related .dts changed for the
> >> board coming up, but I'll add those on top of the current commits.
> >
> > Please coordinate things with Paul and Tero so you at least have proper
> > acks for the hwmod and and clock patches. In general we really want to
> > queue hwmod and clock changes separately as those can easily mess up things
> > in a bad way like we've already seen with overlapping hwmod entries in
> > the .dts files.
>
> Ok. I'm fine with splitting the series if that's easiest way to manage it.
>
> Paul, Tero?
>
> > Also, I'm wondering why we still have .clk and .opt_clks entries in the
> > hwmod data for am43xx and omap5 which are both device tree based with
> > all the clocks coming from .dts files?
>
> I think they are needed for the omap_device/hwmod stuff to work. Only
> omapdss driver knows about the clocks defined in the .dts files, and the
> omap_device/hwmod code still needs to do the reset and maybe some other
> tasks that require the clocks.
We're already populating the hwmod data from dts entries, that's done by
omap_device_build_from_dt. Why aren't we doing that for dt defined clocks?
I'd rather not start adding new data that will then just be removed, that's
what people call "pointless extra churn".
Regards,
Tony
^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
@ 2014-05-12 15:48 ` Tony Lindgren
0 siblings, 0 replies; 52+ messages in thread
From: Tony Lindgren @ 2014-05-12 15:48 UTC (permalink / raw)
To: linux-arm-kernel
* Tomi Valkeinen <tomi.valkeinen@ti.com> [140512 07:58]:
> On 12/05/14 17:36, Tony Lindgren wrote:
> > * Tomi Valkeinen <tomi.valkeinen@ti.com> [140512 06:26]:
> >> Hi Tony,
> >>
> >> On 09/05/14 14:56, Tomi Valkeinen wrote:
> >>> Hi,
> >>>
> >>> Here are arch/arm/ patches to add display support for OMAP5 and AM43x.
> >>>
> >>> I have these in my tree, in a branch I will send to Tony for merging. Most of
> >>> these patches have already been around the lists, but I wanted to send them one
> >>> more time to verify that all looks right and everybody is fine with them.
> >>
> >> I have pushed these to:
> >>
> >> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git 3.16/omap
> >>
> >> If you're fine with these, I think we can consider that branch stable.
> >> There are probably still a few display related .dts changed for the
> >> board coming up, but I'll add those on top of the current commits.
> >
> > Please coordinate things with Paul and Tero so you at least have proper
> > acks for the hwmod and and clock patches. In general we really want to
> > queue hwmod and clock changes separately as those can easily mess up things
> > in a bad way like we've already seen with overlapping hwmod entries in
> > the .dts files.
>
> Ok. I'm fine with splitting the series if that's easiest way to manage it.
>
> Paul, Tero?
>
> > Also, I'm wondering why we still have .clk and .opt_clks entries in the
> > hwmod data for am43xx and omap5 which are both device tree based with
> > all the clocks coming from .dts files?
>
> I think they are needed for the omap_device/hwmod stuff to work. Only
> omapdss driver knows about the clocks defined in the .dts files, and the
> omap_device/hwmod code still needs to do the reset and maybe some other
> tasks that require the clocks.
We're already populating the hwmod data from dts entries, that's done by
omap_device_build_from_dt. Why aren't we doing that for dt defined clocks?
I'd rather not start adding new data that will then just be removed, that's
what people call "pointless extra churn".
Regards,
Tony
^ permalink raw reply [flat|nested] 52+ messages in thread
* Re: [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
2014-05-12 15:48 ` Tony Lindgren
@ 2014-05-16 8:14 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-16 8:14 UTC (permalink / raw)
To: Tony Lindgren
Cc: linux-omap, linux-arm-kernel, Paul Walmsley, Archit Taneja, Tero Kristo
[-- Attachment #1: Type: text/plain, Size: 924 bytes --]
On 12/05/14 18:48, Tony Lindgren wrote:
>>> Also, I'm wondering why we still have .clk and .opt_clks entries in the
>>> hwmod data for am43xx and omap5 which are both device tree based with
>>> all the clocks coming from .dts files?
>>
>> I think they are needed for the omap_device/hwmod stuff to work. Only
>> omapdss driver knows about the clocks defined in the .dts files, and the
>> omap_device/hwmod code still needs to do the reset and maybe some other
>> tasks that require the clocks.
>
> We're already populating the hwmod data from dts entries, that's done by
> omap_device_build_from_dt. Why aren't we doing that for dt defined clocks?
>
> I'd rather not start adding new data that will then just be removed, that's
> what people call "pointless extra churn".
I don't know why. I have to say I'm not 100% sure if that's done or not,
but at least I can't find where it's done.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
@ 2014-05-16 8:14 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-16 8:14 UTC (permalink / raw)
To: linux-arm-kernel
On 12/05/14 18:48, Tony Lindgren wrote:
>>> Also, I'm wondering why we still have .clk and .opt_clks entries in the
>>> hwmod data for am43xx and omap5 which are both device tree based with
>>> all the clocks coming from .dts files?
>>
>> I think they are needed for the omap_device/hwmod stuff to work. Only
>> omapdss driver knows about the clocks defined in the .dts files, and the
>> omap_device/hwmod code still needs to do the reset and maybe some other
>> tasks that require the clocks.
>
> We're already populating the hwmod data from dts entries, that's done by
> omap_device_build_from_dt. Why aren't we doing that for dt defined clocks?
>
> I'd rather not start adding new data that will then just be removed, that's
> what people call "pointless extra churn".
I don't know why. I have to say I'm not 100% sure if that's done or not,
but at least I can't find where it's done.
Tomi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140516/8531d271/attachment.sig>
^ permalink raw reply [flat|nested] 52+ messages in thread
* Re: [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
2014-05-16 8:14 ` Tomi Valkeinen
@ 2014-05-20 5:31 ` Archit Taneja
-1 siblings, 0 replies; 52+ messages in thread
From: Archit Taneja @ 2014-05-20 5:31 UTC (permalink / raw)
To: Tomi Valkeinen, Tony Lindgren
Cc: linux-omap, linux-arm-kernel, Paul Walmsley, Tero Kristo, Rajendra Nayak
Hi,
On Friday 16 May 2014 01:44 PM, Tomi Valkeinen wrote:
> On 12/05/14 18:48, Tony Lindgren wrote:
>
>>>> Also, I'm wondering why we still have .clk and .opt_clks entries in the
>>>> hwmod data for am43xx and omap5 which are both device tree based with
>>>> all the clocks coming from .dts files?
>>>
>>> I think they are needed for the omap_device/hwmod stuff to work. Only
>>> omapdss driver knows about the clocks defined in the .dts files, and the
>>> omap_device/hwmod code still needs to do the reset and maybe some other
>>> tasks that require the clocks.
>>
>> We're already populating the hwmod data from dts entries, that's done by
>> omap_device_build_from_dt. Why aren't we doing that for dt defined clocks?
>>
>> I'd rather not start adding new data that will then just be removed, that's
>> what people call "pointless extra churn".
>
> I don't know why. I have to say I'm not 100% sure if that's done or not,
> but at least I can't find where it's done.
The reason why clocks are needed from hwmod data is because we still
don't populate hwmod fields like main_clk and opt_clock from DT clocks.
The reason why this isn't done yet is because we currently haven't
figured out a clean way to tell hwmod what clock is the main_clk, and
what clocks are optional clocks.
One of the proposed methods was to assume the clock named to be "fck" as
main_clk, and the remaining clocks as optional clocks for hwmod. That
method wasn't agreed upon, this looks like the thread which discusses this:
http://marc.info/?l=linux-arm-kernel&m=138928084823142&w=2
Archit
^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
@ 2014-05-20 5:31 ` Archit Taneja
0 siblings, 0 replies; 52+ messages in thread
From: Archit Taneja @ 2014-05-20 5:31 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Friday 16 May 2014 01:44 PM, Tomi Valkeinen wrote:
> On 12/05/14 18:48, Tony Lindgren wrote:
>
>>>> Also, I'm wondering why we still have .clk and .opt_clks entries in the
>>>> hwmod data for am43xx and omap5 which are both device tree based with
>>>> all the clocks coming from .dts files?
>>>
>>> I think they are needed for the omap_device/hwmod stuff to work. Only
>>> omapdss driver knows about the clocks defined in the .dts files, and the
>>> omap_device/hwmod code still needs to do the reset and maybe some other
>>> tasks that require the clocks.
>>
>> We're already populating the hwmod data from dts entries, that's done by
>> omap_device_build_from_dt. Why aren't we doing that for dt defined clocks?
>>
>> I'd rather not start adding new data that will then just be removed, that's
>> what people call "pointless extra churn".
>
> I don't know why. I have to say I'm not 100% sure if that's done or not,
> but at least I can't find where it's done.
The reason why clocks are needed from hwmod data is because we still
don't populate hwmod fields like main_clk and opt_clock from DT clocks.
The reason why this isn't done yet is because we currently haven't
figured out a clean way to tell hwmod what clock is the main_clk, and
what clocks are optional clocks.
One of the proposed methods was to assume the clock named to be "fck" as
main_clk, and the remaining clocks as optional clocks for hwmod. That
method wasn't agreed upon, this looks like the thread which discusses this:
http://marc.info/?l=linux-arm-kernel&m=138928084823142&w=2
Archit
^ permalink raw reply [flat|nested] 52+ messages in thread
* Re: [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
2014-05-20 5:31 ` Archit Taneja
@ 2014-05-20 8:40 ` Rajendra Nayak
-1 siblings, 0 replies; 52+ messages in thread
From: Rajendra Nayak @ 2014-05-20 8:40 UTC (permalink / raw)
To: Archit Taneja
Cc: Paul Walmsley, Tony Lindgren, Tero Kristo, Tomi Valkeinen,
linux-omap, linux-arm-kernel
On Tuesday 20 May 2014 11:01 AM, Archit Taneja wrote:
> Hi,
>
> On Friday 16 May 2014 01:44 PM, Tomi Valkeinen wrote:
>> On 12/05/14 18:48, Tony Lindgren wrote:
>>
>>>>> Also, I'm wondering why we still have .clk and .opt_clks entries in the
>>>>> hwmod data for am43xx and omap5 which are both device tree based with
>>>>> all the clocks coming from .dts files?
>>>>
>>>> I think they are needed for the omap_device/hwmod stuff to work. Only
>>>> omapdss driver knows about the clocks defined in the .dts files, and the
>>>> omap_device/hwmod code still needs to do the reset and maybe some other
>>>> tasks that require the clocks.
>>>
>>> We're already populating the hwmod data from dts entries, that's done by
>>> omap_device_build_from_dt. Why aren't we doing that for dt defined clocks?
>>>
>>> I'd rather not start adding new data that will then just be removed, that's
>>> what people call "pointless extra churn".
>>
>> I don't know why. I have to say I'm not 100% sure if that's done or not,
>> but at least I can't find where it's done.
>
> The reason why clocks are needed from hwmod data is because we still don't populate hwmod fields like main_clk and opt_clock from DT clocks.
>
> The reason why this isn't done yet is because we currently haven't figured out a clean way to tell hwmod what clock is the main_clk, and what clocks are optional clocks.
>
> One of the proposed methods was to assume the clock named to be "fck" as main_clk, and the remaining clocks as optional clocks for hwmod. That method wasn't agreed upon, this looks like the thread which discusses this:
>
> http://marc.info/?l=linux-arm-kernel&m=138928084823142&w=2
So I started to look through this again and I realized most of the opt clock information
is actually unused within hwmod and does not even need to be there. I just proposed an RFC here to clean some of that [1]
The only modules which do need this seem to be gpio and dss (though we still need to check if all the newer platforms
need this, or this is one of those things just carried forward because some old platform had an issue with gpio and dss
ocp reset)
As far as DSS is concerned, this is used within the custom reset function (not within hwmod) in display.c in mach-omap2/
Its just that the current code relies on hwmod structures, which can very easily now extract this from DT instead.
That just leaves gpio, which should be the only clock information that will have to exist in hwmod till we figure out
how to move it to DT. All the main_clks from hwmod can very easily to moved to DT as already proposed using something like
'fck' to identify them.
[1] http://marc.info/?l=linux-omap&m=140057445618162&w=2
>
> Archit
>
>
^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
@ 2014-05-20 8:40 ` Rajendra Nayak
0 siblings, 0 replies; 52+ messages in thread
From: Rajendra Nayak @ 2014-05-20 8:40 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 20 May 2014 11:01 AM, Archit Taneja wrote:
> Hi,
>
> On Friday 16 May 2014 01:44 PM, Tomi Valkeinen wrote:
>> On 12/05/14 18:48, Tony Lindgren wrote:
>>
>>>>> Also, I'm wondering why we still have .clk and .opt_clks entries in the
>>>>> hwmod data for am43xx and omap5 which are both device tree based with
>>>>> all the clocks coming from .dts files?
>>>>
>>>> I think they are needed for the omap_device/hwmod stuff to work. Only
>>>> omapdss driver knows about the clocks defined in the .dts files, and the
>>>> omap_device/hwmod code still needs to do the reset and maybe some other
>>>> tasks that require the clocks.
>>>
>>> We're already populating the hwmod data from dts entries, that's done by
>>> omap_device_build_from_dt. Why aren't we doing that for dt defined clocks?
>>>
>>> I'd rather not start adding new data that will then just be removed, that's
>>> what people call "pointless extra churn".
>>
>> I don't know why. I have to say I'm not 100% sure if that's done or not,
>> but at least I can't find where it's done.
>
> The reason why clocks are needed from hwmod data is because we still don't populate hwmod fields like main_clk and opt_clock from DT clocks.
>
> The reason why this isn't done yet is because we currently haven't figured out a clean way to tell hwmod what clock is the main_clk, and what clocks are optional clocks.
>
> One of the proposed methods was to assume the clock named to be "fck" as main_clk, and the remaining clocks as optional clocks for hwmod. That method wasn't agreed upon, this looks like the thread which discusses this:
>
> http://marc.info/?l=linux-arm-kernel&m=138928084823142&w=2
So I started to look through this again and I realized most of the opt clock information
is actually unused within hwmod and does not even need to be there. I just proposed an RFC here to clean some of that [1]
The only modules which do need this seem to be gpio and dss (though we still need to check if all the newer platforms
need this, or this is one of those things just carried forward because some old platform had an issue with gpio and dss
ocp reset)
As far as DSS is concerned, this is used within the custom reset function (not within hwmod) in display.c in mach-omap2/
Its just that the current code relies on hwmod structures, which can very easily now extract this from DT instead.
That just leaves gpio, which should be the only clock information that will have to exist in hwmod till we figure out
how to move it to DT. All the main_clks from hwmod can very easily to moved to DT as already proposed using something like
'fck' to identify them.
[1] http://marc.info/?l=linux-omap&m=140057445618162&w=2
>
> Archit
>
>
^ permalink raw reply [flat|nested] 52+ messages in thread
* Re: [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
2014-05-12 14:36 ` Tony Lindgren
@ 2014-05-16 8:42 ` Tomi Valkeinen
-1 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-16 8:42 UTC (permalink / raw)
To: Tony Lindgren
Cc: linux-omap, linux-arm-kernel, Paul Walmsley, Archit Taneja, Tero Kristo
[-- Attachment #1: Type: text/plain, Size: 1398 bytes --]
On 12/05/14 17:36, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen@ti.com> [140512 06:26]:
>> Hi Tony,
>>
>> On 09/05/14 14:56, Tomi Valkeinen wrote:
>>> Hi,
>>>
>>> Here are arch/arm/ patches to add display support for OMAP5 and AM43x.
>>>
>>> I have these in my tree, in a branch I will send to Tony for merging. Most of
>>> these patches have already been around the lists, but I wanted to send them one
>>> more time to verify that all looks right and everybody is fine with them.
>>
>> I have pushed these to:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git 3.16/omap
>>
>> If you're fine with these, I think we can consider that branch stable.
>> There are probably still a few display related .dts changed for the
>> board coming up, but I'll add those on top of the current commits.
>
> Please coordinate things with Paul and Tero so you at least have proper
> acks for the hwmod and and clock patches. In general we really want to
> queue hwmod and clock changes separately as those can easily mess up things
> in a bad way like we've already seen with overlapping hwmod entries in
> the .dts files.
I don't think the clock dts changes can be separated from the other dts
changes, as the new 'dss_l3_iclk' clock node is required by the
omap5.dtsi when adding the DSS support.
The HWMOD patches can go separately.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 52+ messages in thread
* [PATCH 00/11] ARM: OMAP: OMAP5 & AM43x DSS
@ 2014-05-16 8:42 ` Tomi Valkeinen
0 siblings, 0 replies; 52+ messages in thread
From: Tomi Valkeinen @ 2014-05-16 8:42 UTC (permalink / raw)
To: linux-arm-kernel
On 12/05/14 17:36, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen@ti.com> [140512 06:26]:
>> Hi Tony,
>>
>> On 09/05/14 14:56, Tomi Valkeinen wrote:
>>> Hi,
>>>
>>> Here are arch/arm/ patches to add display support for OMAP5 and AM43x.
>>>
>>> I have these in my tree, in a branch I will send to Tony for merging. Most of
>>> these patches have already been around the lists, but I wanted to send them one
>>> more time to verify that all looks right and everybody is fine with them.
>>
>> I have pushed these to:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git 3.16/omap
>>
>> If you're fine with these, I think we can consider that branch stable.
>> There are probably still a few display related .dts changed for the
>> board coming up, but I'll add those on top of the current commits.
>
> Please coordinate things with Paul and Tero so you at least have proper
> acks for the hwmod and and clock patches. In general we really want to
> queue hwmod and clock changes separately as those can easily mess up things
> in a bad way like we've already seen with overlapping hwmod entries in
> the .dts files.
I don't think the clock dts changes can be separated from the other dts
changes, as the new 'dss_l3_iclk' clock node is required by the
omap5.dtsi when adding the DSS support.
The HWMOD patches can go separately.
Tomi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140516/6e0779cc/attachment.sig>
^ permalink raw reply [flat|nested] 52+ messages in thread