From: Cody P Schafer <dev@codyps.com>
To: LKML <linux-kernel@vger.kernel.org>,
Linux PPC <linuxppc-dev@lists.ozlabs.org>,
Cody P Schafer <dev@codyps.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>
Subject: [PATCH 16/16] powerpc/perf/hv-gpci: add the remaining gpci requests
Date: Tue, 27 May 2014 17:22:11 -0700 [thread overview]
Message-ID: <1401236684-10579-17-git-send-email-dev@codyps.com> (raw)
In-Reply-To: <1401236684-10579-1-git-send-email-dev@codyps.com>
Add the remaining gpci requests that contain counters suitable for use
by perf. Omit those that don't contain any counters (but note their
ommision).
CC: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Cody P Schafer <dev@codyps.com>
---
arch/powerpc/perf/hv-gpci-requests.h | 179 +++++++++++++++++++++++++++++++++++
1 file changed, 179 insertions(+)
diff --git a/arch/powerpc/perf/hv-gpci-requests.h b/arch/powerpc/perf/hv-gpci-requests.h
index 0dfc4d9..af3b73c 100644
--- a/arch/powerpc/perf/hv-gpci-requests.h
+++ b/arch/powerpc/perf/hv-gpci-requests.h
@@ -65,6 +65,33 @@ REQUEST(__count(0, 8, processor_time_in_timebase_cycles)
)
#include I(REQUEST_END)
+#define REQUEST_NAME entitled_capped_uncapped_donated_idle_timebase_by_partition
+#define REQUEST_NUM 0x20
+#define REQUEST_IDX_KIND sibling_part_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 8, partition_id)
+ __count(0x8, 8, entitled_cycles)
+ __count(0x10, 8, consumed_capped_cycles)
+ __count(0x18, 8, consumed_uncapped_cycles)
+ __count(0x20, 8, cycles_donated)
+ __count(0x28, 8, purr_idle_cycles)
+)
+#include I(REQUEST_END)
+
+/*
+ * Not avaliable for counter_info_version >= 0x8, use
+ * run_instruction_cycles_by_partition(0x100) instead.
+ */
+#define REQUEST_NAME run_instructions_run_cycles_by_partition
+#define REQUEST_NUM 0x30
+#define REQUEST_IDX_KIND sibling_part_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 8, partition_id)
+ __count(0x8, 8, instructions_completed)
+ __count(0x10, 8, cycles)
+)
+#include I(REQUEST_END)
+
#define REQUEST_NAME system_performance_capabilities
#define REQUEST_NUM 0x40
#define REQUEST_IDX_KIND M1
@@ -75,5 +102,157 @@ REQUEST(__field(0, 1, perf_collect_privileged)
)
#include I(REQUEST_END)
+#define REQUEST_NAME processor_bus_utilization_abc_links
+#define REQUEST_NUM 0x50
+#define REQUEST_IDX_KIND hw_chip_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 4, hw_chip_id)
+ __array(0x4, 0xC, reserved1)
+ __count(0x10, 8, total_link_cycles)
+ __count(0x18, 8, idle_cycles_for_a_link)
+ __count(0x20, 8, idle_cycles_for_b_link)
+ __count(0x28, 8, idle_cycles_for_c_link)
+ __array(0x30, 0x20, reserved2)
+)
+#include I(REQUEST_END)
+
+#define REQUEST_NAME processor_bus_utilization_wxyz_links
+#define REQUEST_NUM 0x60
+#define REQUEST_IDX_KIND hw_chip_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 4, hw_chip_id)
+ __array(0x4, 0xC, reserved1)
+ __count(0x10, 8, total_link_cycles)
+ __count(0x18, 8, idle_cycles_for_w_link)
+ __count(0x20, 8, idle_cycles_for_x_link)
+ __count(0x28, 8, idle_cycles_for_y_link)
+ __count(0x30, 8, idle_cycles_for_z_link)
+ __array(0x38, 0x28, reserved2)
+)
+#include I(REQUEST_END)
+
+#define REQUEST_NAME processor_bus_utilization_gx_links
+#define REQUEST_NUM 0x70
+#define REQUEST_IDX_KIND hw_chip_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 4, hw_chip_id)
+ __array(0x4, 0xC, reserved1)
+ __count(0x10, 8, gx0_in_address_cycles)
+ __count(0x18, 8, gx0_in_data_cycles)
+ __count(0x20, 8, gx0_in_retries)
+ __count(0x28, 8, gx0_in_bus_cycles)
+ __count(0x30, 8, gx0_in_cycles_total)
+ __count(0x38, 8, gx0_out_address_cycles)
+ __count(0x40, 8, gx0_out_data_cycles)
+ __count(0x48, 8, gx0_out_retries)
+ __count(0x50, 8, gx0_out_bus_cycles)
+ __count(0x58, 8, gx0_out_cycles_total)
+ __count(0x60, 8, gx1_in_address_cycles)
+ __count(0x68, 8, gx1_in_data_cycles)
+ __count(0x70, 8, gx1_in_retries)
+ __count(0x78, 8, gx1_in_bus_cycles)
+ __count(0x80, 8, gx1_in_cycles_total)
+ __count(0x88, 8, gx1_out_address_cycles)
+ __count(0x90, 8, gx1_out_data_cycles)
+ __count(0x98, 8, gx1_out_retries)
+ __count(0xA0, 8, gx1_out_bus_cycles)
+ __count(0xA8, 8, gx1_out_cycles_total)
+)
+#include I(REQUEST_END)
+
+#define REQUEST_NAME processor_bus_utilization_mc_links
+#define REQUEST_NUM 0x80
+#define REQUEST_IDX_KIND hw_chip_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 4, hw_chip_id)
+ __array(0x4, 0xC, reserved1)
+ __count(0x10, 8, mc0_frames)
+ __count(0x18, 8, mc0_reads)
+ __count(0x20, 8, mc0_write)
+ __count(0x28, 8, mc0_total_cycles)
+ __count(0x30, 8, mc1_frames)
+ __count(0x38, 8, mc1_reads)
+ __count(0x40, 8, mc1_writes)
+ __count(0x48, 8, mc1_total_cycles)
+)
+#include I(REQUEST_END)
+
+/* Processor_config (0x90) skipped, no counters */
+/* Current_processor_frequency (0x91) skipped, no counters */
+
+#define REQUEST_NAME processor_core_utilization
+#define REQUEST_NUM 0x94
+#define REQUEST_IDX_KIND phys_processor_idx
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 4, phys_processor_idx)
+ __field(0x4, 4, hw_processor_id)
+ __count(0x8, 8, cycles_across_any_thread)
+ __count(0x10, 8, timebase_at_collection)
+ __count(0x18, 8, purr_cycles)
+ __count(0x20, 8, sum_of_cycles_across_all_threads)
+ __count(0x28, 8, instructions_completed)
+)
+#include I(REQUEST_END)
+
+/* Processor_core_power_mode (0x95) skipped, no counters */
+/* Affinity_domain_information_by_virtual_processor (0xA0) skipped, no counters */
+/* Affinity_domain_information_by_domain (0xB0) skipped, no counters */
+/* Affinity_domain_information_by_partition (0xB1) skipped, no counters */
+/* Physical_memory_info (0xC0) skipped, no counters */
+/* Processor_bus_topology (0xD0) skipped, no counters */
+
+#define REQUEST_NAME partition_hypervisor_queuing_times
+#define REQUEST_NUM 0xE0
+#define REQUEST_IDX_KIND partition_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 2, partition_id)
+ __array(0x2, 0x6, reserved1)
+ __count(0x8, 8, time_waiting_for_entitlement)
+ __count(0x10, 8, times_waited_for_entitlement)
+ __count(0x18, 8, time_waiting_for_phys_processor)
+ __count(0x20, 8, times_waited_for_phys_processor)
+ __count(0x28, 8, dispatches_on_home_core)
+ __count(0x30, 8, dispatches_on_home_primary_affinity_domain)
+ __count(0x38, 8, dispatches_on_home_secondary_affinity_domain)
+ __count(0x40, 8, dispatches_off_home_secondary_affinity_domain)
+ __count(0x48, 8, dispatches_on_dedicated_processor_donating_cycles)
+)
+#include I(REQUEST_END)
+
+#define REQUEST_NAME system_hypervisor_times
+#define REQUEST_NUM 0xF0
+#define REQUEST_IDX_KIND M1
+#include I(REQUEST_BEGIN)
+REQUEST(__count(0, 8, time_spent_to_dispatch_virtual_processors)
+ __count(0x8, 8, time_spent_processing_virtual_processor_timers)
+ __count(0x10, 8, time_spent_managing_partitions_over_entitlement)
+ __count(0x18, 8, time_spent_on_system_managment)
+)
+#include I(REQUEST_END)
+
+#define REQUEST_NAME system_tlbie_count_and_time
+#define REQUEST_NUM 0xF4
+#define REQUEST_IDX_KIND M1
+#include I(REQUEST_BEGIN)
+REQUEST(__count(0, 8, tlbie_instructions_issued)
+ /* FIXME: The spec says the offset here is 0x10, which I suspect is wrong. */
+ __count(0x8, 8, time_spent_issuing_tlbies)
+)
+#include I(REQUEST_END)
+
+#define REQUEST_NAME partition_instruction_count_and_time
+#define REQUEST_NUM 0x100
+#define REQUEST_IDX_KIND partition_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 2, partition_id)
+ __array(0x2, 0x6, reserved1)
+ __count(0x8, 8, instructions_performed)
+ __count(0x10, 8, time_collected)
+)
+#include I(REQUEST_END)
+
+/* set_mmcrh (0x80001000) skipped, no counters */
+/* retrieve_hpmcx (0x80002000) skipped, no counters */
+
#undef M1
#include "req-gen/_end.h"
--
1.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Cody P Schafer <dev@codyps.com>
To: LKML <linux-kernel@vger.kernel.org>,
Linux PPC <linuxppc-dev@lists.ozlabs.org>,
Cody P Schafer <dev@codyps.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>,
Paul Mackerras <paulus@samba.org>
Subject: [PATCH 16/16] powerpc/perf/hv-gpci: add the remaining gpci requests
Date: Tue, 27 May 2014 17:22:11 -0700 [thread overview]
Message-ID: <1401236684-10579-17-git-send-email-dev@codyps.com> (raw)
In-Reply-To: <1401236684-10579-1-git-send-email-dev@codyps.com>
Add the remaining gpci requests that contain counters suitable for use
by perf. Omit those that don't contain any counters (but note their
ommision).
CC: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Cody P Schafer <dev@codyps.com>
---
arch/powerpc/perf/hv-gpci-requests.h | 179 +++++++++++++++++++++++++++++++++++
1 file changed, 179 insertions(+)
diff --git a/arch/powerpc/perf/hv-gpci-requests.h b/arch/powerpc/perf/hv-gpci-requests.h
index 0dfc4d9..af3b73c 100644
--- a/arch/powerpc/perf/hv-gpci-requests.h
+++ b/arch/powerpc/perf/hv-gpci-requests.h
@@ -65,6 +65,33 @@ REQUEST(__count(0, 8, processor_time_in_timebase_cycles)
)
#include I(REQUEST_END)
+#define REQUEST_NAME entitled_capped_uncapped_donated_idle_timebase_by_partition
+#define REQUEST_NUM 0x20
+#define REQUEST_IDX_KIND sibling_part_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 8, partition_id)
+ __count(0x8, 8, entitled_cycles)
+ __count(0x10, 8, consumed_capped_cycles)
+ __count(0x18, 8, consumed_uncapped_cycles)
+ __count(0x20, 8, cycles_donated)
+ __count(0x28, 8, purr_idle_cycles)
+)
+#include I(REQUEST_END)
+
+/*
+ * Not avaliable for counter_info_version >= 0x8, use
+ * run_instruction_cycles_by_partition(0x100) instead.
+ */
+#define REQUEST_NAME run_instructions_run_cycles_by_partition
+#define REQUEST_NUM 0x30
+#define REQUEST_IDX_KIND sibling_part_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 8, partition_id)
+ __count(0x8, 8, instructions_completed)
+ __count(0x10, 8, cycles)
+)
+#include I(REQUEST_END)
+
#define REQUEST_NAME system_performance_capabilities
#define REQUEST_NUM 0x40
#define REQUEST_IDX_KIND M1
@@ -75,5 +102,157 @@ REQUEST(__field(0, 1, perf_collect_privileged)
)
#include I(REQUEST_END)
+#define REQUEST_NAME processor_bus_utilization_abc_links
+#define REQUEST_NUM 0x50
+#define REQUEST_IDX_KIND hw_chip_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 4, hw_chip_id)
+ __array(0x4, 0xC, reserved1)
+ __count(0x10, 8, total_link_cycles)
+ __count(0x18, 8, idle_cycles_for_a_link)
+ __count(0x20, 8, idle_cycles_for_b_link)
+ __count(0x28, 8, idle_cycles_for_c_link)
+ __array(0x30, 0x20, reserved2)
+)
+#include I(REQUEST_END)
+
+#define REQUEST_NAME processor_bus_utilization_wxyz_links
+#define REQUEST_NUM 0x60
+#define REQUEST_IDX_KIND hw_chip_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 4, hw_chip_id)
+ __array(0x4, 0xC, reserved1)
+ __count(0x10, 8, total_link_cycles)
+ __count(0x18, 8, idle_cycles_for_w_link)
+ __count(0x20, 8, idle_cycles_for_x_link)
+ __count(0x28, 8, idle_cycles_for_y_link)
+ __count(0x30, 8, idle_cycles_for_z_link)
+ __array(0x38, 0x28, reserved2)
+)
+#include I(REQUEST_END)
+
+#define REQUEST_NAME processor_bus_utilization_gx_links
+#define REQUEST_NUM 0x70
+#define REQUEST_IDX_KIND hw_chip_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 4, hw_chip_id)
+ __array(0x4, 0xC, reserved1)
+ __count(0x10, 8, gx0_in_address_cycles)
+ __count(0x18, 8, gx0_in_data_cycles)
+ __count(0x20, 8, gx0_in_retries)
+ __count(0x28, 8, gx0_in_bus_cycles)
+ __count(0x30, 8, gx0_in_cycles_total)
+ __count(0x38, 8, gx0_out_address_cycles)
+ __count(0x40, 8, gx0_out_data_cycles)
+ __count(0x48, 8, gx0_out_retries)
+ __count(0x50, 8, gx0_out_bus_cycles)
+ __count(0x58, 8, gx0_out_cycles_total)
+ __count(0x60, 8, gx1_in_address_cycles)
+ __count(0x68, 8, gx1_in_data_cycles)
+ __count(0x70, 8, gx1_in_retries)
+ __count(0x78, 8, gx1_in_bus_cycles)
+ __count(0x80, 8, gx1_in_cycles_total)
+ __count(0x88, 8, gx1_out_address_cycles)
+ __count(0x90, 8, gx1_out_data_cycles)
+ __count(0x98, 8, gx1_out_retries)
+ __count(0xA0, 8, gx1_out_bus_cycles)
+ __count(0xA8, 8, gx1_out_cycles_total)
+)
+#include I(REQUEST_END)
+
+#define REQUEST_NAME processor_bus_utilization_mc_links
+#define REQUEST_NUM 0x80
+#define REQUEST_IDX_KIND hw_chip_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 4, hw_chip_id)
+ __array(0x4, 0xC, reserved1)
+ __count(0x10, 8, mc0_frames)
+ __count(0x18, 8, mc0_reads)
+ __count(0x20, 8, mc0_write)
+ __count(0x28, 8, mc0_total_cycles)
+ __count(0x30, 8, mc1_frames)
+ __count(0x38, 8, mc1_reads)
+ __count(0x40, 8, mc1_writes)
+ __count(0x48, 8, mc1_total_cycles)
+)
+#include I(REQUEST_END)
+
+/* Processor_config (0x90) skipped, no counters */
+/* Current_processor_frequency (0x91) skipped, no counters */
+
+#define REQUEST_NAME processor_core_utilization
+#define REQUEST_NUM 0x94
+#define REQUEST_IDX_KIND phys_processor_idx
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 4, phys_processor_idx)
+ __field(0x4, 4, hw_processor_id)
+ __count(0x8, 8, cycles_across_any_thread)
+ __count(0x10, 8, timebase_at_collection)
+ __count(0x18, 8, purr_cycles)
+ __count(0x20, 8, sum_of_cycles_across_all_threads)
+ __count(0x28, 8, instructions_completed)
+)
+#include I(REQUEST_END)
+
+/* Processor_core_power_mode (0x95) skipped, no counters */
+/* Affinity_domain_information_by_virtual_processor (0xA0) skipped, no counters */
+/* Affinity_domain_information_by_domain (0xB0) skipped, no counters */
+/* Affinity_domain_information_by_partition (0xB1) skipped, no counters */
+/* Physical_memory_info (0xC0) skipped, no counters */
+/* Processor_bus_topology (0xD0) skipped, no counters */
+
+#define REQUEST_NAME partition_hypervisor_queuing_times
+#define REQUEST_NUM 0xE0
+#define REQUEST_IDX_KIND partition_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 2, partition_id)
+ __array(0x2, 0x6, reserved1)
+ __count(0x8, 8, time_waiting_for_entitlement)
+ __count(0x10, 8, times_waited_for_entitlement)
+ __count(0x18, 8, time_waiting_for_phys_processor)
+ __count(0x20, 8, times_waited_for_phys_processor)
+ __count(0x28, 8, dispatches_on_home_core)
+ __count(0x30, 8, dispatches_on_home_primary_affinity_domain)
+ __count(0x38, 8, dispatches_on_home_secondary_affinity_domain)
+ __count(0x40, 8, dispatches_off_home_secondary_affinity_domain)
+ __count(0x48, 8, dispatches_on_dedicated_processor_donating_cycles)
+)
+#include I(REQUEST_END)
+
+#define REQUEST_NAME system_hypervisor_times
+#define REQUEST_NUM 0xF0
+#define REQUEST_IDX_KIND M1
+#include I(REQUEST_BEGIN)
+REQUEST(__count(0, 8, time_spent_to_dispatch_virtual_processors)
+ __count(0x8, 8, time_spent_processing_virtual_processor_timers)
+ __count(0x10, 8, time_spent_managing_partitions_over_entitlement)
+ __count(0x18, 8, time_spent_on_system_managment)
+)
+#include I(REQUEST_END)
+
+#define REQUEST_NAME system_tlbie_count_and_time
+#define REQUEST_NUM 0xF4
+#define REQUEST_IDX_KIND M1
+#include I(REQUEST_BEGIN)
+REQUEST(__count(0, 8, tlbie_instructions_issued)
+ /* FIXME: The spec says the offset here is 0x10, which I suspect is wrong. */
+ __count(0x8, 8, time_spent_issuing_tlbies)
+)
+#include I(REQUEST_END)
+
+#define REQUEST_NAME partition_instruction_count_and_time
+#define REQUEST_NUM 0x100
+#define REQUEST_IDX_KIND partition_id
+#include I(REQUEST_BEGIN)
+REQUEST(__field(0, 2, partition_id)
+ __array(0x2, 0x6, reserved1)
+ __count(0x8, 8, instructions_performed)
+ __count(0x10, 8, time_collected)
+)
+#include I(REQUEST_END)
+
+/* set_mmcrh (0x80001000) skipped, no counters */
+/* retrieve_hpmcx (0x80002000) skipped, no counters */
+
#undef M1
#include "req-gen/_end.h"
--
1.9.3
next prev parent reply other threads:[~2014-05-28 0:29 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-28 0:21 [PATCH 00/16] perf: add support for parameterized events from sysfs (powerpc 24x7) Cody P Schafer
2014-05-28 0:21 ` [PATCH 01/16] tools/perf: allow overriding sysfs and proc finding with env var Cody P Schafer
2014-06-05 14:31 ` [tip:perf/core] perf tools: Allow " tip-bot for Cody P Schafer
2014-05-28 0:21 ` [PATCH 02/16] powerpc/perf/hv-24x7: use kmem_cache instead of aligned stack allocations Cody P Schafer
2014-05-28 0:21 ` [PATCH 03/16] perf Documentation: sysfs events/ interfaces Cody P Schafer
2014-05-28 0:21 ` Cody P Schafer
2014-05-28 0:21 ` [PATCH 04/16] perf Documentation: remove duplicated docs for powerpc cpu specific events Cody P Schafer
2014-05-28 0:21 ` Cody P Schafer
2014-05-28 0:22 ` [PATCH 05/16] perf Documentation: add event parameters Cody P Schafer
2014-05-28 0:22 ` Cody P Schafer
2014-05-28 0:22 ` [PATCH 06/16] tools/perf: annotate list_head with type info Cody P Schafer
2014-05-28 0:22 ` Cody P Schafer
2014-05-28 0:22 ` [PATCH 07/16] tools/perf: support parsing parameterized events Cody P Schafer
2014-05-28 0:22 ` Cody P Schafer
2014-05-28 0:22 ` [PATCH 08/16] tools/perf: extend format_alias() to include event parameters Cody P Schafer
2014-05-28 0:22 ` Cody P Schafer
2014-05-28 0:22 ` [PATCH 09/16] tools/perf: document parameterized events and note symbolically formed events Cody P Schafer
2014-05-28 0:22 ` Cody P Schafer
2014-05-28 0:22 ` [PATCH 10/16] perf: provide sysfs_show for struct perf_pmu_events_attr Cody P Schafer
2014-05-28 0:22 ` [PATCH 11/16] byteorder: provide a linux/byteorder.h with {be,le}_to_cpu() and cpu_to_{be,le}() macros Cody P Schafer
2014-05-28 0:22 ` [PATCH 11/16] byteorder: provide a linux/byteorder.h with {be, le}_to_cpu() and cpu_to_{be, le}() macros Cody P Schafer
2014-05-28 0:44 ` [PATCH 11/16] byteorder: provide a linux/byteorder.h with {be,le}_to_cpu() and cpu_to_{be,le}() macros Joe Perches
2014-05-28 0:44 ` Joe Perches
2014-05-28 22:07 ` Cody P Schafer
2014-05-28 22:07 ` Cody P Schafer
2014-05-28 8:45 ` [PATCH 11/16] byteorder: provide a linux/byteorder.h with {be, le}_to_cpu() and cpu_to_{be, le}() macros David Laight
2014-05-28 8:45 ` David Laight
2014-05-28 22:05 ` Cody P Schafer
2014-05-28 22:05 ` Cody P Schafer
2014-05-28 22:11 ` Cody P Schafer
2014-05-28 22:11 ` Cody P Schafer
2014-05-28 23:00 ` Joe Perches
2014-05-28 23:00 ` Joe Perches
2014-05-28 23:26 ` Cody P Schafer
2014-05-28 23:26 ` Cody P Schafer
2014-05-29 8:36 ` David Laight
2014-05-29 8:36 ` David Laight
2014-05-28 0:22 ` [PATCH 12/16] powerpc/perf/hv-24x7: parse catalog and populate sysfs with events Cody P Schafer
2014-05-28 0:22 ` [PATCH 13/16] powerpc/perf/hv-24x7: Documentaion for new sysfs entries which expose descriptions Cody P Schafer
2014-05-28 0:22 ` Cody P Schafer
2014-05-28 0:22 ` [PATCH 14/16] perf: add PMU_EVENT_ATTR_STRING() helper Cody P Schafer
2014-05-28 0:22 ` [PATCH 15/16] powerpc/perf/{hv-gpci,hv-common}: generate requests with counters annotated Cody P Schafer
2014-05-28 0:22 ` [PATCH 15/16] powerpc/perf/{hv-gpci, hv-common}: " Cody P Schafer
2014-05-28 0:22 ` Cody P Schafer [this message]
2014-05-28 0:22 ` [PATCH 16/16] powerpc/perf/hv-gpci: add the remaining gpci requests Cody P Schafer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401236684-10579-17-git-send-email-dev@codyps.com \
--to=dev@codyps.com \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=paulus@samba.org \
--cc=sukadev@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.