* [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support
@ 2014-05-30 7:22 Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 1/9] arm: ls102xa: Add Freescale LS102xA SoC support Alison Wang
` (9 more replies)
0 siblings, 10 replies; 15+ messages in thread
From: Alison Wang @ 2014-05-30 7:22 UTC (permalink / raw)
To: u-boot
This series contain the support for Freescale LS102xA SoC and LS1021AQDS board.
The QorIQ LS1 family is built on Layerscape architecture, the industry's first
software-aware, core-agnostic networking architecture to offer unprecedented
efficiency and scale.
Freescale LS102xA is a set of SoCs combines two ARM Cortex-A7 cores that have
been optimized for high reliability and pack the highest level of integration
available for sub-3 W embedded communications processors with Layerscape
architecture and with a comprehensive enablement model focused on ease of
programmability.
For the detail information about LS1021AQDS board, please refer to README in the patch.
----------------------------------------------------------------
Alison Wang (5):
arm: ls102xa: Add Freescale LS102xA SoC support
arm: ls102xa: Add i2c support for LS102xA
arm: ls102xa: Add etsec support for LS102xA
arm: ls102xa: Add esdhc support for LS102xA
arm: ls102xa: Add basic support for LS1021AQDS board
Claudiu Manoil (1):
net: Merge asm/fsl_enet.h into fsl_mdio.h
York Sun (3):
driver/ddr/freescale: Add support of accumulate ECC
driver/ddr/freescale: Fix DDR3 driver for ARM
driver/ddr/fsl: Add support of overriding chip select write leveling
arch/powerpc/include/asm/fsl_enet.h | 24 --
board/freescale/ls1021aqds/Makefile | 8 +
board/freescale/ls1021aqds/README | 112 +++++++++
board/freescale/ls1021aqds/ddr.c | 169 +++++++++++++
board/freescale/ls1021aqds/ddr.h | 64 +++++
board/freescale/ls1021aqds/ls1021aqds.c | 208 ++++++++++++++++
board/freescale/ls1021aqds/ls1021aqds_qixis.h | 35 +++
board/freescale/mpc8360emds/mpc8360emds.c | 2 +-
board/freescale/mpc837xemds/mpc837xemds.c | 1 -
boards.cfg | 1 +
drivers/ddr/fsl/arm_ddr_gen3.c | 2 +-
drivers/ddr/fsl/ctrl_regs.c | 8 +
drivers/ddr/fsl/interactive.c | 2 +
drivers/i2c/mxc_i2c.c | 2 +-
drivers/mmc/fsl_esdhc.c | 4 +-
drivers/net/fm/dtsec.c | 1 -
drivers/net/fm/fm.h | 2 +-
drivers/net/fm/init.c | 1 +
drivers/net/fm/memac.c | 1 -
drivers/net/fm/tgec.c | 1 -
drivers/net/fsl_mdio.c | 16 +-
drivers/net/tsec.c | 7 +
drivers/qe/uec.h | 1 -
include/common.h | 5 +-
include/configs/ls1021aqds.h | 418 ++++++++++++++++++++++++++++++++
include/fm_eth.h | 2 +-
include/fsl_ddr_sdram.h | 2 +
include/fsl_esdhc.h | 14 +-
include/fsl_mdio.h | 13 +-
include/tsec.h | 7 +-
30 files changed, 1087 insertions(+), 46 deletions(-)
delete mode 100644 arch/powerpc/include/asm/fsl_enet.h
create mode 100644 board/freescale/ls1021aqds/Makefile
create mode 100644 board/freescale/ls1021aqds/README
create mode 100644 board/freescale/ls1021aqds/ddr.c
create mode 100644 board/freescale/ls1021aqds/ddr.h
create mode 100644 board/freescale/ls1021aqds/ls1021aqds.c
create mode 100644 board/freescale/ls1021aqds/ls1021aqds_qixis.h
create mode 100644 include/configs/ls1021aqds.h
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 1/9] arm: ls102xa: Add Freescale LS102xA SoC support
2014-05-30 7:22 [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Alison Wang
@ 2014-05-30 7:22 ` Alison Wang
2014-06-03 14:36 ` Diana Craciun
2014-05-30 7:22 ` [U-Boot] [PATCH 2/9] arm: ls102xa: Add i2c support for LS102xA Alison Wang
` (8 subsequent siblings)
9 siblings, 1 reply; 15+ messages in thread
From: Alison Wang @ 2014-05-30 7:22 UTC (permalink / raw)
To: u-boot
The QorIQ LS1 family is built on Layerscape architecture,
the industry's first software-aware, core-agnostic networking
architecture to offer unprecedented efficiency and scale.
Freescale LS102xA is a set of SoCs combines two ARM
Cortex-A7 cores that have been optimized for high
reliability and pack the highest level of integration
available for sub-3 W embedded communications processors
with Layerscape architecture and with a comprehensive
enablement model focused on ease of programmability.
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Jason Jin <jason.jin@freescale.com>
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
---
arch/arm/cpu/armv7/ls102xa/Makefile | 11 +
arch/arm/cpu/armv7/ls102xa/clock.c | 131 +++++++
arch/arm/cpu/armv7/ls102xa/cpu.c | 102 ++++++
arch/arm/cpu/armv7/ls102xa/fdt.c | 82 +++++
arch/arm/cpu/armv7/ls102xa/timer.c | 129 +++++++
arch/arm/include/asm/arch-ls102xa/clock.h | 23 ++
arch/arm/include/asm/arch-ls102xa/config.h | 70 ++++
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 420 ++++++++++++++++++++++
arch/arm/include/asm/arch-ls102xa/imx-regs.h | 53 +++
arch/arm/include/asm/config.h | 4 +
arch/arm/include/asm/io.h | 8 +-
drivers/watchdog/Makefile | 2 +-
12 files changed, 1033 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/cpu/armv7/ls102xa/Makefile
create mode 100644 arch/arm/cpu/armv7/ls102xa/clock.c
create mode 100644 arch/arm/cpu/armv7/ls102xa/cpu.c
create mode 100644 arch/arm/cpu/armv7/ls102xa/fdt.c
create mode 100644 arch/arm/cpu/armv7/ls102xa/timer.c
create mode 100644 arch/arm/include/asm/arch-ls102xa/clock.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/config.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/imx-regs.h
diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile
new file mode 100644
index 0000000..7ef793a
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/Makefile
@@ -0,0 +1,11 @@
+#
+# Copyright 2014 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += cpu.o
+obj-y += clock.o
+obj-y += timer.o
+
+obj-$(CONFIG_OF_LIBFDT) += fdt.o
diff --git a/arch/arm/cpu/armv7/ls102xa/clock.c b/arch/arm/cpu/armv7/ls102xa/clock.c
new file mode 100644
index 0000000..75bb0e9
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/clock.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/clock.h>
+#include <fsl_ifc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
+#endif
+
+void get_sys_info(struct sys_info *sys_info)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+#ifdef CONFIG_FSL_IFC
+ struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+ u32 ccr;
+#endif
+ struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_LS1_CLK_ADDR);
+ unsigned int cpu;
+ const u8 core_cplx_pll[6] = {
+ [0] = 0, /* CC1 PPL / 1 */
+ [1] = 0, /* CC1 PPL / 2 */
+ [4] = 1, /* CC2 PPL / 1 */
+ [5] = 1, /* CC2 PPL / 2 */
+ };
+
+ const u8 core_cplx_pll_div[6] = {
+ [0] = 1, /* CC1 PPL / 1 */
+ [1] = 2, /* CC1 PPL / 2 */
+ [4] = 1, /* CC2 PPL / 1 */
+ [5] = 2, /* CC2 PPL / 2 */
+ };
+
+ uint i;
+ uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
+ uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
+ unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+
+ sys_info->freq_systembus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+ sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+#else
+ sys_info->freq_ddrbus = sysclk;
+#endif
+
+ sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >>
+ RCWSR0_SYS_PLL_RAT_SHIFT) & RCWSR0_SYS_PLL_RAT_MASK;
+ sys_info->freq_ddrbus *= (in_be32(&gur->rcwsr[0]) >>
+ RCWSR0_MEM_PLL_RAT_SHIFT) & RCWSR0_MEM_PLL_RAT_MASK;
+
+ for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
+ ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0x3f;
+ if (ratio[i] > 4)
+ freq_c_pll[i] = sysclk * ratio[i];
+ else
+ freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
+ }
+
+ for (cpu = 0; cpu < CONFIG_MAX_CPUS; cpu++) {
+ u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27)
+ & 0xf;
+ u32 cplx_pll = core_cplx_pll[c_pll_sel];
+
+ sys_info->freq_processor[cpu] =
+ freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
+ }
+
+#if defined(CONFIG_FSL_IFC)
+ ccr = in_be32(&ifc_regs->ifc_ccr);
+ ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
+
+ sys_info->freq_localbus = sys_info->freq_systembus / ccr;
+#endif
+}
+
+
+int get_clocks(void)
+{
+ struct sys_info sys_info;
+
+ get_sys_info(&sys_info);
+ gd->cpu_clk = sys_info.freq_processor[0];
+ gd->bus_clk = sys_info.freq_systembus;
+ gd->mem_clk = sys_info.freq_ddrbus * 2;
+
+#if defined(CONFIG_FSL_ESDHC)
+ gd->arch.sdhc_clk = gd->bus_clk;
+#endif
+
+ return 0;
+}
+
+ulong get_bus_freq(ulong dummy)
+{
+ return gd->bus_clk;
+}
+
+ulong get_ddr_freq(ulong dummy)
+{
+ return gd->mem_clk;
+}
+
+int get_serial_clock(void)
+{
+ return gd->bus_clk / 2;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+ switch (clk) {
+ case MXC_I2C_CLK:
+ return get_bus_freq(0) / 2;
+ case MXC_ESDHC_CLK:
+ return get_bus_freq(0);
+ case MXC_DSPI_CLK:
+ return get_bus_freq(0) / 2;
+ case MXC_UART_CLK:
+ return get_bus_freq(0) / 2;
+ default:
+ printf("Unsupported clock\n");
+ }
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
new file mode 100644
index 0000000..72d198f
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <tsec.h>
+#include <netdev.h>
+#include <fsl_esdhc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ char buf[32];
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ unsigned int svr, major, minor, ver, i;
+
+ svr = in_be32(&gur->svr);
+ major = SVR_MAJ(svr);
+ minor = SVR_MIN(svr);
+
+ puts("CPU: Freescale LayerScape ");
+
+ ver = SVR_SOC_VER(svr);
+ switch (ver) {
+ case SOC_VER_SLS1020:
+ puts("SLS1020");
+ break;
+ case SOC_VER_LS1020:
+ puts("LS1020");
+ break;
+ case SOC_VER_LS1021:
+ puts("LS1021");
+ break;
+ case SOC_VER_LS1022:
+ puts("LS1022");
+ break;
+ default:
+ puts("Unknown");
+ break;
+ }
+
+ if (IS_E_PROCESSOR(svr) && (ver != SOC_VER_SLS1020))
+ puts("E");
+
+ printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
+
+ puts("Clock Configuration:");
+
+ printf("\n CPU0(ARMV7):%-4s MHz, ", strmhz(buf, gd->cpu_clk));
+ printf("\n Bus:%-4s MHz, ", strmhz(buf, gd->bus_clk));
+ printf("DDR:%-4s MHz, ", strmhz(buf, gd->mem_clk));
+ puts("\n");
+
+ /* Display the RCW, so that no one gets confused as to what RCW
+ * we're actually using for this boot.
+ */
+ puts("Reset Configuration Word (RCW):");
+ for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+ u32 rcw = in_be32(&gur->rcwsr[i]);
+
+ if ((i % 4) == 0)
+ printf("\n %08x:", i * 4);
+ printf(" %08x", rcw);
+ }
+ puts("\n");
+
+ return 0;
+}
+#endif
+
+void enable_caches(void)
+{
+#ifndef CONFIG_SYS_ICACHE_OFF
+ icache_enable();
+#endif
+#ifndef CONFIG_SYS_DCACHE_OFF
+ dcache_enable();
+#endif
+}
+
+#ifdef CONFIG_FSL_ESDHC
+int cpu_mmc_init(bd_t *bis)
+{
+ return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
+int cpu_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_TSEC_ENET
+ tsec_standard_init(bis);
+#endif
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
new file mode 100644
index 0000000..042d457
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch/clock.h>
+#include <linux/ctype.h>
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fdt_add_enet_stashing(void *fdt)
+{
+ do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1);
+ do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1);
+ do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1);
+}
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ int off;
+ int val;
+ unsigned long busclk = get_bus_freq(0);
+
+ fdt_fixup_ethernet(blob);
+
+ fdt_add_enet_stashing(blob);
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+ while (off != -FDT_ERR_NOTFOUND) {
+ val = gd->cpu_clk;
+ fdt_setprop(blob, off, "clock-frequency", &val, 4);
+ off = fdt_node_offset_by_prop_value(blob, off,
+ "device_type", "cpu", 4);
+ }
+
+ do_fixup_by_prop_u32(blob,
+ "device_type", "soc", 4, "bus-frequency", busclk / 2, 1);
+
+#ifdef CONFIG_SYS_NS16550
+ do_fixup_by_compat_u32(blob, "ns16550",
+ "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+#endif
+
+ do_fixup_by_compat_u32(blob, "fsl,sys-clock",
+ "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+
+#if defined(CONFIG_FSL_ESDHC)
+ fdt_fixup_esdhc(blob, bd);
+#endif
+
+ /*
+ * platform bus clock = system bus clock/2
+ * Here busclk = system bus clock
+ * We are using the platform bus clock as 1588 Timer reference
+ * clock source select
+ */
+ do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer",
+ "timer-frequency", busclk / 2, 1);
+
+ /*
+ * clock-freq should change to clock-frequency and
+ * flexcan-v1.0 should change to p1010-flexcan respectively
+ * in the future.
+ */
+ do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
+ "clock_freq", busclk / 2, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
+ "clock-frequency", busclk / 2, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan",
+ "clock-frequency", busclk / 2, 1);
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/timer.c b/arch/arm/cpu/armv7/ls102xa/timer.c
new file mode 100644
index 0000000..db5eb65
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/timer.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <div64.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This function is intended for SHORT delays only.
+ * It will overflow at around 10 seconds @ 400MHz,
+ * or 20 seconds @ 200MHz.
+ */
+unsigned long usec2ticks(unsigned long usec)
+{
+ ulong ticks;
+
+ if (usec < 1000)
+ ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
+ else
+ ticks = ((usec / 10) * (get_tbclk() / 100000));
+
+ return ticks;
+}
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+ unsigned long freq;
+
+ asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, freq);
+
+ return tick;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long usec)
+{
+ unsigned long freq;
+
+ asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+ usec = usec * freq + 999999;
+ do_div(usec, 1000000);
+
+ return usec;
+}
+
+int timer_init(void)
+{
+ struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR;
+ unsigned long ctrl, val, freq;
+
+ /* Enable System Counter */
+ writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr);
+
+ freq = GENERIC_TIMER_CLK;
+ asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+ /* Set PL1 Physical Timer Ctrl */
+ ctrl = ARCH_TIMER_CTRL_ENABLE;
+ asm("mcr p15, 0, %0, c14, c2, 1" : : "r" (ctrl));
+
+ /* Set PL1 Physical Comp Value */
+ val = TIMER_COMP_VAL;
+ asm("mcrr p15, 2, %Q0, %R0, c14" : : "r" (val));
+
+ gd->arch.tbl = 0;
+ gd->arch.tbu = 0;
+
+ return 0;
+}
+
+unsigned long long get_ticks(void)
+{
+ unsigned long long now;
+
+ asm("mrrc p15, 0, %Q0, %R0, c14" : "=r" (now));
+
+ /* increment tbu if tbl has rolled over */
+ if (now < gd->arch.tbl)
+ gd->arch.tbu++;
+ gd->arch.tbl = now;
+
+ return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
+}
+
+unsigned long get_timer_masked(void)
+{
+ return tick_to_time(get_ticks());
+}
+
+unsigned long get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+/* delay x useconds and preserve advance timstamp value */
+void __udelay(unsigned long usec)
+{
+ unsigned long long start;
+ unsigned long tmo;
+
+ start = get_ticks(); /* get current timestamp */
+ tmo = us_to_tick(usec); /* convert usecs to ticks */
+
+ while ((get_ticks() - start) < tmo)
+ ; /* loop till time has passed */
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+unsigned long get_tbclk(void)
+{
+ unsigned long freq;
+
+ asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+ return freq;
+}
diff --git a/arch/arm/include/asm/arch-ls102xa/clock.h b/arch/arm/include/asm/arch-ls102xa/clock.h
new file mode 100644
index 0000000..fd36bb0
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/clock.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#ifndef __ASM_ARCH_LS102XA_CLOCK_H_
+#define __ASM_ARCH_LS102XA_CLOCK_H_
+
+#include <common.h>
+
+enum mxc_clock {
+ MXC_ARM_CLK = 0,
+ MXC_UART_CLK,
+ MXC_ESDHC_CLK,
+ MXC_I2C_CLK,
+ MXC_DSPI_CLK,
+};
+
+unsigned int mxc_get_clock(enum mxc_clock clk);
+
+#endif /* __ASM_ARCH_LS102XA_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
new file mode 100644
index 0000000..2e90c94
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2014, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV7_LS102xA_CONFIG_
+#define _ASM_ARMV7_LS102xA_CONFIG_
+
+#define CONFIG_SYS_IMMR 0x01000000
+
+#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
+#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000)
+#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
+#define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000)
+#define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000)
+#define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000)
+#define CONFIG_SYS_FSL_LS1_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000)
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500)
+
+#define CONFIG_SYS_CCI400_ADDR 0x01180000
+
+#define CONFIG_SYS_TSEC1_OFFSET 0x01d10000
+#define CONFIG_SYS_TSEC2_OFFSET 0x01d50000
+#define CONFIG_SYS_TSEC3_OFFSET 0x01d90000
+#define CONFIG_SYS_MDIO1_OFFSET 0x01d24000
+
+#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+
+#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
+
+#define SCTR_BASE_ADDR (CONFIG_SYS_IMMR + 0x01b00000)
+
+#define I2C1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01180000)
+#define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01190000)
+#define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x011a0000)
+
+#define WDOG1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01ad0000)
+
+#define QSPI0_BASE_ADDR (CONFIG_SYS_IMMR + 0x00550000)
+#define DSPI1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01100000)
+
+#define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000)
+
+#define CONFIG_SYS_FSL_DDR_BE
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_FSL_DDRC_ARM_GEN3
+#define CONFIG_SYS_FSL_DDR
+#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS1_DDR_BLOCK1_SIZE
+
+#define CONFIG_SYS_FSL_IFC_BE
+#define CONFIG_SYS_FSL_ESDHC_BE
+#define CONFIG_SYS_FSL_WDOG_BE
+#define CONFIG_SYS_FSL_DSPI_BE
+#define CONFIG_SYS_FSL_QSPI_BE
+
+#define CONFIG_SYS_FSL_SRDS_1
+
+#ifdef CONFIG_LS102xA
+#define CONFIG_MAX_CPUS 2
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#else
+#error SoC not defined
+#endif
+
+#endif /* _ASM_ARMV7_LS102xA_CONFIG_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
new file mode 100644
index 0000000..1ee451d
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -0,0 +1,420 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_LS102XA_IMMAP_H_
+#define __ASM_ARCH_LS102XA_IMMAP_H_
+
+#define SVR_MAJ(svr) (((svr) >> 4) & 0xf)
+#define SVR_MIN(svr) (((svr) >> 0) & 0xf)
+#define SVR_SOC_VER(svr) (((svr) >> 8) & 0x7ff)
+#define IS_E_PROCESSOR(svr) (svr & 0x80000)
+
+#define SOC_VER_SLS1020 0x00
+#define SOC_VER_LS1020 0x10
+#define SOC_VER_LS1021 0x11
+#define SOC_VER_LS1022 0x12
+
+#define RCWSR0_SYS_PLL_RAT_SHIFT 25
+#define RCWSR0_SYS_PLL_RAT_MASK 0x1f
+#define RCWSR0_MEM_PLL_RAT_SHIFT 16
+#define RCWSR0_MEM_PLL_RAT_MASK 0x3f
+
+#define RCWSR4_SRDS1_PRTCL_SHIFT 24
+#define RCWSR4_SRDS1_PRTCL_MASK 0xff000000
+
+#define TIMER_COMP_VAL 0xffffffff
+#define ARCH_TIMER_CTRL_ENABLE (1 << 0)
+#define SYS_COUNTER_CTRL_ENABLE (1 << 24)
+
+struct sys_info {
+ unsigned long freq_processor[CONFIG_MAX_CPUS];
+ unsigned long freq_systembus;
+ unsigned long freq_ddrbus;
+ unsigned long freq_localbus;
+};
+
+/* Device Configuration and Pin Control */
+struct ccsr_gur {
+ u32 porsr1; /* POR status 1 */
+ u32 porsr2; /* POR status 2 */
+ u8 res_008[0x20-0x8];
+ u32 gpporcr1; /* General-purpose POR configuration */
+ u32 gpporcr2;
+ u32 dcfg_fusesr; /* Fuse status register */
+ u8 res_02c[0x70-0x2c];
+ u32 devdisr; /* Device disable control */
+ u32 devdisr2; /* Device disable control 2 */
+ u32 devdisr3; /* Device disable control 3 */
+ u32 devdisr4; /* Device disable control 4 */
+ u32 devdisr5; /* Device disable control 5 */
+ u8 res_084[0x94-0x84];
+ u32 coredisru; /* uppper portion for support of 64 cores */
+ u32 coredisrl; /* lower portion for support of 64 cores */
+ u8 res_09c[0xa4-0x9c];
+ u32 svr; /* System version */
+ u8 res_0a8[0xb0-0xa8];
+ u32 rstcr; /* Reset control */
+ u32 rstrqpblsr; /* Reset request preboot loader status */
+ u8 res_0b8[0xc0-0xb8];
+ u32 rstrqmr1; /* Reset request mask */
+ u8 res_0c4[0xc8-0xc4];
+ u32 rstrqsr1; /* Reset request status */
+ u8 res_0cc[0xd4-0xcc];
+ u32 rstrqwdtmrl; /* Reset request WDT mask */
+ u8 res_0d8[0xdc-0xd8];
+ u32 rstrqwdtsrl; /* Reset request WDT status */
+ u8 res_0e0[0xe4-0xe0];
+ u32 brrl; /* Boot release */
+ u8 res_0e8[0x100-0xe8];
+ u32 rcwsr[16]; /* Reset control word status */
+ u8 res_140[0x200-0x140];
+ u32 scratchrw[4]; /* Scratch Read/Write */
+ u8 res_210[0x300-0x210];
+ u32 scratchw1r[4]; /* Scratch Read (Write once) */
+ u8 res_310[0x400-0x310];
+ u32 crstsr;
+ u8 res_404[0x550-0x404];
+ u32 sataliodnr;
+ u8 res_554[0x604-0x554];
+ u32 pamubypenr;
+ u32 dmacr1;
+ u8 res_60c[0x740-0x60c]; /* add more registers when needed */
+ u32 tp_ityp[64]; /* Topology Initiator Type Register */
+ struct {
+ u32 upper;
+ u32 lower;
+ } tp_cluster[1]; /* Core Cluster n Topology Register */
+ u8 res_848[0xe60-0x848];
+ u32 ddrclkdr;
+ u8 res_e60[0xe68-0xe64];
+ u32 ifcclkdr;
+ u8 res_e68[0xe80-0xe6c];
+ u32 sdhcpcr;
+};
+
+/* Supplemental Configuration Unit */
+struct ccsr_scfg {
+ u32 dpslpcr;
+ u32 resv0[2];
+ u32 etsecclkdpslpcr;
+ u32 resv1[5];
+ u32 fuseovrdcr;
+ u32 pixclkcr;
+ u32 resv2[5];
+ u32 spimsicr;
+ u32 resv3[6];
+ u32 pex1pmwrcr;
+ u32 pex1pmrdsr;
+ u32 resv4[3];
+ u32 usb3prm1cr;
+ u32 usb4prm2cr;
+ u32 pex1rdmsgpldlsbsr;
+ u32 pex1rdmsgpldmsbsr;
+ u32 pex2rdmsgpldlsbsr;
+ u32 pex2rdmsgpldmsbsr;
+ u32 pex1rdmmsgrqsr;
+ u32 pex2rdmmsgrqsr;
+ u32 spimsiclrcr;
+ u32 pex1mscportsr;
+ u32 pex2mscportsr;
+ u32 pex2pmwrcr;
+ u32 resv5[24];
+ u32 mac1_streamid;
+ u32 mac2_streamid;
+ u32 mac3_streamid;
+ u32 pex1_streamid;
+ u32 pex2_streamid;
+ u32 dma_streamid;
+ u32 sata_streamid;
+ u32 usb3_streamid;
+ u32 qe_streamid;
+ u32 sdhc_streamid;
+ u32 adma_streamid;
+ u32 letechsftrstcr;
+ u32 core0_sft_rst;
+ u32 core1_sft_rst;
+ u32 resv6[1];
+ u32 usb_hi_addr;
+ u32 etsecclkadjcr;
+ u32 sai_clk;
+ u32 resv7[1];
+ u32 dcu_streamid;
+ u32 usb2_streamid;
+ u32 ftm_reset;
+ u32 altcbar;
+ u32 qspi_cfg;
+ u32 pmcintecr;
+ u32 pmcintlecr;
+ u32 pmcintsr;
+ u32 qos1;
+ u32 qos2;
+ u32 qos3;
+ u32 cci_cfg;
+ u32 resv8[1];
+ u32 etsecdmamcr;
+ u32 usb3prm3cr;
+ u32 resv9[1];
+ u32 debug_streamid;
+ u32 resv10[5];
+ u32 snpcnfgcr;
+ u32 resv11[1];
+ u32 intpcr;
+ u32 resv12[20];
+ u32 scfgrevcr;
+ u32 coresrencr;
+ u32 pex2pmrdsr;
+ u32 ddrc1cr;
+ u32 ddrc2cr;
+ u32 ddrc3cr;
+ u32 ddrc4cr;
+ u32 ddrgcr;
+ u32 resv13[120];
+ u32 qeioclkcr;
+ u32 etsecmcr;
+ u32 sdhciovserlcr;
+ u32 resv14[61];
+ u32 sparecr;
+};
+
+/* Clocking */
+struct ccsr_clk {
+ struct {
+ u32 clkcncsr; /* core cluster n clock control status */
+ u8 res_004[0x1c];
+ } clkcsr[2];
+ u8 res_040[0x7c0]; /* 0x100 */
+ struct {
+ u32 pllcngsr;
+ u8 res_804[0x1c];
+ } pllcgsr[2];
+ u8 res_840[0x1c0];
+ u32 clkpcsr; /* 0xa00 Platform clock domain control/status */
+ u8 res_a04[0x1fc];
+ u32 pllpgsr; /* 0xc00 Platform PLL General Status */
+ u8 res_c04[0x1c];
+ u32 plldgsr; /* 0xc20 DDR PLL General Status */
+ u8 res_c24[0x3dc];
+};
+
+/* System Counter */
+struct sctr_regs {
+ u32 cntcr;
+ u32 cntsr;
+ u32 cntcv1;
+ u32 cntcv2;
+ u32 resv1[4];
+ u32 cntfid0;
+ u32 cntfid1;
+ u32 resv2[1002];
+ u32 counterid[12];
+};
+
+#define MAX_SERDES 1
+#define SRDS_MAX_LANES 4
+#define SRDS_MAX_BANK 2
+
+#define SRDS_RSTCTL_RST 0x80000000
+#define SRDS_RSTCTL_RSTDONE 0x40000000
+#define SRDS_RSTCTL_RSTERR 0x20000000
+#define SRDS_RSTCTL_SWRST 0x10000000
+#define SRDS_RSTCTL_SDEN 0x00000020
+#define SRDS_RSTCTL_SDRST_B 0x00000040
+#define SRDS_RSTCTL_PLLRST_B 0x00000080
+#define SRDS_PLLCR0_POFF 0x80000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
+#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
+#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
+#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
+#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
+#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000
+#define SRDS_PLLCR0_PLL_LCK 0x00800000
+#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000
+#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000
+#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000
+#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000
+#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000
+#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000
+#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
+
+struct ccsr_serdes {
+ struct {
+ u32 rstctl; /* Reset Control Register */
+
+ u32 pllcr0; /* PLL Control Register 0 */
+
+ u32 pllcr1; /* PLL Control Register 1 */
+ u32 res_0c; /* 0x00c */
+ u32 pllcr3;
+ u32 pllcr4;
+ u8 res_18[0x20-0x18];
+ } bank[2];
+ u8 res_40[0x90-0x40];
+ u32 srdstcalcr; /* 0x90 TX Calibration Control */
+ u8 res_94[0xa0-0x94];
+ u32 srdsrcalcr; /* 0xa0 RX Calibration Control */
+ u8 res_a4[0xb0-0xa4];
+ u32 srdsgr0; /* 0xb0 General Register 0 */
+ u8 res_b4[0xe0-0xb4];
+ u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */
+ u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */
+ u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */
+ u32 srdspccr3; /* 0xec Protocol Converter Config 3 */
+ u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */
+ u8 res_f4[0x100-0xf4];
+ struct {
+ u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */
+ u8 res_104[0x120-0x104];
+ } srdslnpssr[4];
+ u8 res_180[0x300-0x180];
+ u32 srdspexeqcr;
+ u32 srdspexeqpcr[11];
+ u8 res_330[0x400-0x330];
+ u32 srdspexapcr;
+ u8 res_404[0x440-0x404];
+ u32 srdspexbpcr;
+ u8 res_444[0x800-0x444];
+ struct {
+ u32 gcr0; /* 0x800 General Control Register 0 */
+ u32 gcr1; /* 0x804 General Control Register 1 */
+ u32 gcr2; /* 0x808 General Control Register 2 */
+ u32 sscr0;
+ u32 recr0; /* 0x810 Receive Equalization Control */
+ u32 recr1;
+ u32 tecr0; /* 0x818 Transmit Equalization Control */
+ u32 sscr1;
+ u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */
+ u8 res_824[0x83c-0x824];
+ u32 tcsr3;
+ } lane[4]; /* Lane A, B, C, D, E, F, G, H */
+ u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */
+};
+
+/* DDR memory controller registers */
+struct ccsr_ddr {
+ u32 cs0_bnds; /* Chip Select 0 Memory Bounds */
+ u32 resv1[1];
+ u32 cs1_bnds; /* Chip Select 1 Memory Bounds */
+ u32 resv2[1];
+ u32 cs2_bnds; /* Chip Select 2 Memory Bounds */
+ u32 resv3[1];
+ u32 cs3_bnds; /* Chip Select 3 Memory Bounds */
+ u32 resv4[25];
+ u32 cs0_config; /* Chip Select Configuration */
+ u32 cs1_config; /* Chip Select Configuration */
+ u32 cs2_config; /* Chip Select Configuration */
+ u32 cs3_config; /* Chip Select Configuration */
+ u32 resv5[12];
+ u32 cs0_config_2; /* Chip Select Configuration 2 */
+ u32 cs1_config_2; /* Chip Select Configuration 2 */
+ u32 cs2_config_2; /* Chip Select Configuration 2 */
+ u32 cs3_config_2; /* Chip Select Configuration 2 */
+ u32 resv6[12];
+ u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */
+ u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */
+ u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */
+ u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */
+ u32 sdram_cfg; /* SDRAM Control Configuration */
+ u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */
+ u32 sdram_mode; /* SDRAM Mode Configuration */
+ u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */
+ u32 sdram_md_cntl; /* SDRAM Mode Control */
+ u32 sdram_interval; /* SDRAM Interval Configuration */
+ u32 sdram_data_init; /* SDRAM Data initialization */
+ u32 resv7[1];
+ u32 sdram_clk_cntl; /* SDRAM Clock Control */
+ u32 resv8[5];
+ u32 init_addr; /* training init addr */
+ u32 init_ext_addr; /* training init extended addr */
+ u32 resv9[4];
+ u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */
+ u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */
+ u32 timing_cfg_6; /* SDRAM Timing Configuration 6 */
+ u32 timing_cfg_7; /* SDRAM Timing Configuration 7 */
+ u32 ddr_zq_cntl; /* ZQ calibration control*/
+ u32 ddr_wrlvl_cntl; /* write leveling control*/
+ u32 resv10[1];
+ u32 ddr_sr_cntr; /* self refresvh counter */
+ u32 ddr_sdram_rcw_1; /* Control Words 1 */
+ u32 ddr_sdram_rcw_2; /* Control Words 2 */
+ u32 resv11[2];
+ u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */
+ u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */
+ u32 resv12[2];
+ u32 ddr_sdram_rcw_3; /* Control Words 3 */
+ u32 ddr_sdram_rcw_4; /* Control Words 4 */
+ u32 ddr_sdram_rcw_5; /* Control Words 5 */
+ u32 ddr_sdram_rcw_6; /* Control Words 6 */
+ u32 resv13[20];
+ u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */
+ u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */
+ u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */
+ u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */
+ u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */
+ u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */
+ u32 sdram_mode_9; /* SDRAM Mode Configuration 9 */
+ u32 sdram_mode_10; /* SDRAM Mode Configuration 10 */
+ u32 sdram_mode_11; /* SDRAM Mode Configuration 11 */
+ u32 sdram_mode_12; /* SDRAM Mode Configuration 12 */
+ u32 sdram_mode_13; /* SDRAM Mode Configuration 13 */
+ u32 sdram_mode_14; /* SDRAM Mode Configuration 14 */
+ u32 sdram_mode_15; /* SDRAM Mode Configuration 15 */
+ u32 sdram_mode_16; /* SDRAM Mode Configuration 16 */
+ u32 resv14[4];
+ u32 timing_cfg_8; /* SDRAM Timing Configuration 8 */
+ u32 timing_cfg_9; /* SDRAM Timing Configuration 9 */
+ u32 resv15[2];
+ u32 sdram_cfg_3; /* SDRAM Control Configuration 3 */
+ u32 resv16[15];
+ u32 deskew_cntl; /* SDRAM Deskew Control */
+ u32 resv17[545];
+ u32 ddr_dsr1; /* Debug Status 1 */
+ u32 ddr_dsr2; /* Debug Status 2 */
+ u32 ddr_cdr1; /* Control Driver 1 */
+ u32 ddr_cdr2; /* Control Driver 2 */
+ u32 resv18[50];
+ u32 ip_rev1; /* IP Block Revision 1 */
+ u32 ip_rev2; /* IP Block Revision 2 */
+ u32 eor; /* Enhanced Optimization Register */
+ u32 resv19[63];
+ u32 mtcr; /* Memory Test Control Register */
+ u32 resv20[7];
+ u32 mtp1; /* Memory Test Pattern 1 */
+ u32 mtp2; /* Memory Test Pattern 2 */
+ u32 mtp3; /* Memory Test Pattern 3 */
+ u32 mtp4; /* Memory Test Pattern 4 */
+ u32 mtp5; /* Memory Test Pattern 5 */
+ u32 mtp6; /* Memory Test Pattern 6 */
+ u32 mtp7; /* Memory Test Pattern 7 */
+ u32 mtp8; /* Memory Test Pattern 8 */
+ u32 mtp9; /* Memory Test Pattern 9 */
+ u32 mtp10; /* Memory Test Pattern 10 */
+ u32 resv21[6];
+ u32 ddr_mt_st_ext_addr; /* Memory Test Start Extended Address */
+ u32 ddr_mt_st_addr; /* Memory Test Start Address */
+ u32 ddr_mt_end_ext_addr; /* Memory Test End Extended Address */
+ u32 ddr_mt_end_addr; /* Memory Test End Address */
+ u32 resv22[36];
+ u32 data_err_inject_hi; /* Data Path Err Injection Mask High */
+ u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */
+ u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */
+ u32 resv23[5];
+ u32 capture_data_hi; /* Data Path Read Capture High */
+ u32 capture_data_lo; /* Data Path Read Capture Low */
+ u32 capture_ecc; /* Data Path Read Capture ECC */
+ u32 resv24[5];
+ u32 err_detect; /* Error Detect */
+ u32 err_disable; /* Error Disable */
+ u32 err_int_en;
+ u32 capture_attributes; /* Error Attrs Capture */
+ u32 capture_address; /* Error Addr Capture */
+ u32 capture_ext_address; /* Error Extended Addr Capture */
+ u32 err_sbe; /* Single-Bit ECC Error Management */
+ u32 resv25[105];
+};
+
+#endif /* __ASM_ARCH_LS102XA_IMMAP_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/imx-regs.h b/arch/arm/include/asm/arch-ls102xa/imx-regs.h
new file mode 100644
index 0000000..f9cd75b
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/imx-regs.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#ifndef __ASM_ARCH_IMX_REGS_H__
+#define __ASM_ARCH_IMX_REGS_H__
+
+#define I2C_QUIRK_REG /* enable 8-bit driver */
+
+#ifdef CONFIG_LPUART_32B_REG
+struct lpuart_fsl {
+ u32 baud;
+ u32 stat;
+ u32 ctrl;
+ u32 data;
+ u32 match;
+ u32 modir;
+ u32 fifo;
+ u32 water;
+};
+#else
+struct lpuart_fsl {
+ u8 ubdh;
+ u8 ubdl;
+ u8 uc1;
+ u8 uc2;
+ u8 us1;
+ u8 us2;
+ u8 uc3;
+ u8 ud;
+ u8 uma1;
+ u8 uma2;
+ u8 uc4;
+ u8 uc5;
+ u8 ued;
+ u8 umodem;
+ u8 uir;
+ u8 reserved;
+ u8 upfifo;
+ u8 ucfifo;
+ u8 usfifo;
+ u8 utwfifo;
+ u8 utcfifo;
+ u8 urwfifo;
+ u8 urcfifo;
+ u8 rsvd[28];
+};
+#endif
+
+#endif /* __ASM_ARCH_IMX_REGS_H__ */
diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 2a20a77..6c8ea9f 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -17,4 +17,8 @@
#define CONFIG_STATIC_RELA
#endif
+#ifdef CONFIG_LS102xA
+#include <asm/arch/config.h>
+#endif
+
#endif
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 6a1f05a..9e3a99d 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -367,7 +367,12 @@ out:
return retval;
}
-#elif !defined(readb)
+#else
+#define memset_io(a, b, c) memset((void *)(a), (b), (c))
+#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
+#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
+
+#if !defined(readb)
#define readb(addr) (__readwrite_bug("readb"),0)
#define readw(addr) (__readwrite_bug("readw"),0)
@@ -380,6 +385,7 @@ out:
#define check_signature(io,sig,len) (0)
+#endif
#endif /* __mem_pci */
/*
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 06ced10..a869eae 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -7,7 +7,7 @@
obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
-ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610))
+ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610 ls102xa))
obj-y += imx_watchdog.o
endif
obj-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o
--
1.8.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 2/9] arm: ls102xa: Add i2c support for LS102xA
2014-05-30 7:22 [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 1/9] arm: ls102xa: Add Freescale LS102xA SoC support Alison Wang
@ 2014-05-30 7:22 ` Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 3/9] net: Merge asm/fsl_enet.h into fsl_mdio.h Alison Wang
` (7 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Alison Wang @ 2014-05-30 7:22 UTC (permalink / raw)
To: u-boot
Signed-off-by: Alison Wang <alison.wang@freescale.com>
---
drivers/i2c/mxc_i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 48468d7..792fc40 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -423,7 +423,7 @@ static void * const i2c_bases[] = {
(void *)IMX_I2C2_BASE
#elif defined(CONFIG_MX31) || defined(CONFIG_MX35) || \
defined(CONFIG_MX51) || defined(CONFIG_MX53) || \
- defined(CONFIG_MX6)
+ defined(CONFIG_MX6) || defined(CONFIG_LS102xA)
(void *)I2C1_BASE_ADDR,
(void *)I2C2_BASE_ADDR,
(void *)I2C3_BASE_ADDR
--
1.8.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 3/9] net: Merge asm/fsl_enet.h into fsl_mdio.h
2014-05-30 7:22 [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 1/9] arm: ls102xa: Add Freescale LS102xA SoC support Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 2/9] arm: ls102xa: Add i2c support for LS102xA Alison Wang
@ 2014-05-30 7:22 ` Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 4/9] arm: ls102xa: Add etsec support for LS102xA Alison Wang
` (6 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Alison Wang @ 2014-05-30 7:22 UTC (permalink / raw)
To: u-boot
From: Claudiu Manoil <claudiu.manoil@freescale.com>
fsl_enet.h defines the mapping of the usual MII management
registers, which are included in the MDIO register block
common to Freescale ethernet controllers. So it shouldn't
depend on the CPU architecture but it should be actually
part of the arch independent fsl_mdio.h.
To remove the arch dependency, merge the content of
asm/fsl_enet.h into fsl_mdio.h.
Some files (like fm_eth.h) were simply including fsl_enet.h
only for phy.h. These were updated to include phy.h instead.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
---
arch/powerpc/include/asm/fsl_enet.h | 24 ------------------------
board/freescale/mpc8360emds/mpc8360emds.c | 2 +-
board/freescale/mpc837xemds/mpc837xemds.c | 1 -
drivers/net/fm/dtsec.c | 1 -
drivers/net/fm/fm.h | 2 +-
drivers/net/fm/init.c | 1 +
drivers/net/fm/memac.c | 1 -
drivers/net/fm/tgec.c | 1 -
drivers/net/fsl_mdio.c | 1 -
drivers/qe/uec.h | 1 -
include/fm_eth.h | 2 +-
include/fsl_mdio.h | 13 ++++++++++++-
include/tsec.h | 2 +-
13 files changed, 17 insertions(+), 35 deletions(-)
delete mode 100644 arch/powerpc/include/asm/fsl_enet.h
diff --git a/arch/powerpc/include/asm/fsl_enet.h b/arch/powerpc/include/asm/fsl_enet.h
deleted file mode 100644
index 96146b6..0000000
--- a/arch/powerpc/include/asm/fsl_enet.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ASM_PPC_FSL_ENET_H
-#define __ASM_PPC_FSL_ENET_H
-
-#include <phy.h>
-
-struct tsec_mii_mng {
- u32 miimcfg; /* MII management configuration reg */
- u32 miimcom; /* MII management command reg */
- u32 miimadd; /* MII management address reg */
- u32 miimcon; /* MII management control reg */
- u32 miimstat; /* MII management status reg */
- u32 miimind; /* MII management indication reg */
- u32 ifstat; /* Interface Status Register */
-} __attribute__ ((packed));
-
-int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc);
-
-#endif /* __ASM_PPC_FSL_ENET_H */
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index ac96163..5ff9dff 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -11,13 +11,13 @@
#include <i2c.h>
#include <miiphy.h>
#include <phy.h>
+#include <fsl_mdio.h>
#if defined(CONFIG_PCI)
#include <pci.h>
#endif
#include <spd_sdram.h>
#include <asm/mmu.h>
#include <asm/io.h>
-#include <asm/fsl_enet.h>
#include <asm/mmu.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index 0a3c972..c749e55 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -10,7 +10,6 @@
#include <i2c.h>
#include <asm/io.h>
#include <asm/fsl_mpc83xx_serdes.h>
-#include <asm/fsl_enet.h>
#include <spd_sdram.h>
#include <tsec.h>
#include <libfdt.h>
diff --git a/drivers/net/fm/dtsec.c b/drivers/net/fm/dtsec.c
index 78bbd43..8d3dc0e 100644
--- a/drivers/net/fm/dtsec.c
+++ b/drivers/net/fm/dtsec.c
@@ -7,7 +7,6 @@
#include <common.h>
#include <asm/types.h>
#include <asm/io.h>
-#include <asm/fsl_enet.h>
#include <asm/fsl_dtsec.h>
#include <fsl_mdio.h>
#include <phy.h>
diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h
index 43de114..c8eba4f 100644
--- a/drivers/net/fm/fm.h
+++ b/drivers/net/fm/fm.h
@@ -8,8 +8,8 @@
#define __FM_H__
#include <common.h>
+#include <phy.h>
#include <fm_eth.h>
-#include <asm/fsl_enet.h>
#include <asm/fsl_fman.h>
/* Port ID */
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index cd787f4..7371dbf 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -6,6 +6,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/fsl_serdes.h>
+#include <fsl_mdio.h>
#include "fm.h"
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
index 592a67f..9499290 100644
--- a/drivers/net/fm/memac.c
+++ b/drivers/net/fm/memac.c
@@ -12,7 +12,6 @@
#include <phy.h>
#include <asm/types.h>
#include <asm/io.h>
-#include <asm/fsl_enet.h>
#include <asm/fsl_memac.h>
#include "fm.h"
diff --git a/drivers/net/fm/tgec.c b/drivers/net/fm/tgec.c
index f450f80..5017123 100644
--- a/drivers/net/fm/tgec.c
+++ b/drivers/net/fm/tgec.c
@@ -12,7 +12,6 @@
#include <phy.h>
#include <asm/types.h>
#include <asm/io.h>
-#include <asm/fsl_enet.h>
#include <asm/fsl_tgec.h>
#include "fm.h"
diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c
index 1d88e65..8d09f5d 100644
--- a/drivers/net/fsl_mdio.c
+++ b/drivers/net/fsl_mdio.c
@@ -11,7 +11,6 @@
#include <fsl_mdio.h>
#include <asm/io.h>
#include <asm/errno.h>
-#include <asm/fsl_enet.h>
void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr,
int dev_addr, int regnum, int value)
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 48a1634..6b559f7 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -13,7 +13,6 @@
#include "qe.h"
#include "uccf.h"
#include <phy.h>
-#include <asm/fsl_enet.h>
#define MAX_TX_THREADS 8
#define MAX_RX_THREADS 8
diff --git a/include/fm_eth.h b/include/fm_eth.h
index 98edfcf..e46a684 100644
--- a/include/fm_eth.h
+++ b/include/fm_eth.h
@@ -8,8 +8,8 @@
#define __FM_ETH_H__
#include <common.h>
+#include <phy.h>
#include <asm/types.h>
-#include <asm/fsl_enet.h>
enum fm_port {
FM1_DTSEC1,
diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h
index b58713d..a531edf 100644
--- a/include/fsl_mdio.h
+++ b/include/fsl_mdio.h
@@ -10,7 +10,18 @@
#include <net.h>
#include <miiphy.h>
-#include <asm/fsl_enet.h>
+
+struct tsec_mii_mng {
+ u32 miimcfg; /* MII management configuration reg */
+ u32 miimcom; /* MII management command reg */
+ u32 miimadd; /* MII management address reg */
+ u32 miimcon; /* MII management control reg */
+ u32 miimstat; /* MII management status reg */
+ u32 miimind; /* MII management indication reg */
+ u32 ifstat; /* Interface Status Register */
+} __packed;
+
+int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc);
/* PHY register offsets */
#define PHY_EXT_PAGE_ACCESS 0x1f
diff --git a/include/tsec.h b/include/tsec.h
index 1046426..2054715 100644
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -20,7 +20,7 @@
#include <net.h>
#include <config.h>
#include <phy.h>
-#include <asm/fsl_enet.h>
+#include <fsl_mdio.h>
#define TSEC_SIZE 0x01000
#define TSEC_MDIO_OFFSET 0x01000
--
1.8.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 4/9] arm: ls102xa: Add etsec support for LS102xA
2014-05-30 7:22 [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Alison Wang
` (2 preceding siblings ...)
2014-05-30 7:22 ` [U-Boot] [PATCH 3/9] net: Merge asm/fsl_enet.h into fsl_mdio.h Alison Wang
@ 2014-05-30 7:22 ` Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 5/9] arm: ls102xa: Add esdhc " Alison Wang
` (5 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Alison Wang @ 2014-05-30 7:22 UTC (permalink / raw)
To: u-boot
Signed-off-by: Alison Wang <alison.wang@freescale.com>
---
drivers/net/fsl_mdio.c | 15 ++++++++++++---
drivers/net/tsec.c | 7 +++++++
include/tsec.h | 7 ++++++-
3 files changed, 25 insertions(+), 4 deletions(-)
diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c
index 8d09f5d..5cee709 100644
--- a/drivers/net/fsl_mdio.c
+++ b/drivers/net/fsl_mdio.c
@@ -12,6 +12,15 @@
#include <asm/io.h>
#include <asm/errno.h>
+void tsec_mdio_sync(void)
+{
+#if defined(CONFIG_PPC)
+ asm("sync");
+#elif defined(CONFIG_ARM)
+ asm("dsb");
+#endif
+}
+
void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr,
int dev_addr, int regnum, int value)
{
@@ -19,7 +28,7 @@ void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr,
out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f));
out_be32(&phyregs->miimcon, value);
- asm("sync");
+ tsec_mdio_sync();
while ((in_be32(&phyregs->miimind) & MIIMIND_BUSY) && timeout--)
;
@@ -37,11 +46,11 @@ int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr,
/* Clear the command register, and wait */
out_be32(&phyregs->miimcom, 0);
- asm("sync");
+ tsec_mdio_sync();
/* Initiate a read command, and wait */
out_be32(&phyregs->miimcom, MIIMCOM_READ_CYCLE);
- asm("sync");
+ tsec_mdio_sync();
/* Wait for the the indication that the read is done */
while ((in_be32(&phyregs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index e9138f0..a220221 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -20,6 +20,7 @@
#include <fsl_mdio.h>
#include <asm/errno.h>
#include <asm/processor.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -270,6 +271,9 @@ void redundant_init(struct eth_device *dev)
out_be32(®s->tstat, TSTAT_CLEAR_THALT);
out_be32(®s->rstat, RSTAT_CLEAR_RHALT);
clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
+#ifdef CONFIG_LS102xA
+ setbits_be32(®s->dmactrl, DMACTRL_LE);
+#endif
do {
uint16_t status;
@@ -366,6 +370,9 @@ static void startup_tsec(struct eth_device *dev)
out_be32(®s->tstat, TSTAT_CLEAR_THALT);
out_be32(®s->rstat, RSTAT_CLEAR_RHALT);
clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
+#ifdef CONFIG_LS102xA
+ setbits_be32(®s->dmactrl, DMACTRL_LE);
+#endif
}
/* This returns the status bits of the device. The return value
diff --git a/include/tsec.h b/include/tsec.h
index 2054715..5b74f67 100644
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -20,10 +20,14 @@
#include <net.h>
#include <config.h>
#include <phy.h>
-#include <fsl_mdio.h>
+#ifdef CONFIG_LS102xA
+#define TSEC_SIZE 0x40000
+#define TSEC_MDIO_OFFSET 0x40000
+#else
#define TSEC_SIZE 0x01000
#define TSEC_MDIO_OFFSET 0x01000
+#endif
#define CONFIG_SYS_MDIO_BASE_ADDR (MDIO_BASE_ADDR + 0x520)
@@ -128,6 +132,7 @@
#define DMACTRL_INIT_SETTINGS 0x000000c3
#define DMACTRL_GRS 0x00000010
#define DMACTRL_GTS 0x00000008
+#define DMACTRL_LE 0x00008000
#define TSTAT_CLEAR_THALT 0x80000000
#define RSTAT_CLEAR_RHALT 0x00800000
--
1.8.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 5/9] arm: ls102xa: Add esdhc support for LS102xA
2014-05-30 7:22 [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Alison Wang
` (3 preceding siblings ...)
2014-05-30 7:22 ` [U-Boot] [PATCH 4/9] arm: ls102xa: Add etsec support for LS102xA Alison Wang
@ 2014-05-30 7:22 ` Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 6/9] driver/ddr/freescale: Add support of accumulate ECC Alison Wang
` (4 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Alison Wang @ 2014-05-30 7:22 UTC (permalink / raw)
To: u-boot
Signed-off-by: Alison Wang <alison.wang@freescale.com>
---
drivers/mmc/fsl_esdhc.c | 4 ++--
include/fsl_esdhc.h | 14 +++++++++++++-
2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 5541613..aec459f 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -96,7 +96,7 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
else if (cmd->resp_type & MMC_RSP_PRESENT)
xfertyp |= XFERTYP_RSPTYP_48;
-#if defined(CONFIG_MX53) || defined(CONFIG_PPC_T4240)
+#if defined(CONFIG_MX53) || defined(CONFIG_PPC_T4240) || defined(CONFIG_LS102xA)
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
xfertyp |= XFERTYP_CMDTYP_ABORT;
#endif
@@ -561,7 +561,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
memset(&cfg->cfg, 0, sizeof(cfg->cfg));
voltage_caps = 0;
- caps = regs->hostcapblt;
+ caps = esdhc_read32(®s->hostcapblt);
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135
caps = caps & ~(ESDHC_HOSTCAPBLT_SRS |
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 9814964..c1b6648 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -162,7 +162,19 @@ struct fsl_esdhc_cfg {
};
/* Select the correct accessors depending on endianess */
-#if __BYTE_ORDER == __LITTLE_ENDIAN
+#if defined CONFIG_SYS_FSL_ESDHC_LE
+#define esdhc_read32 in_le32
+#define esdhc_write32 out_le32
+#define esdhc_clrsetbits32 clrsetbits_le32
+#define esdhc_clrbits32 clrbits_le32
+#define esdhc_setbits32 setbits_le32
+#elif defined(CONFIG_SYS_FSL_ESDHC_BE)
+#define esdhc_read32 in_be32
+#define esdhc_write32 out_be32
+#define esdhc_clrsetbits32 clrsetbits_be32
+#define esdhc_clrbits32 clrbits_be32
+#define esdhc_setbits32 setbits_be32
+#elif __BYTE_ORDER == __LITTLE_ENDIAN
#define esdhc_read32 in_le32
#define esdhc_write32 out_le32
#define esdhc_clrsetbits32 clrsetbits_le32
--
1.8.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 6/9] driver/ddr/freescale: Add support of accumulate ECC
2014-05-30 7:22 [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Alison Wang
` (4 preceding siblings ...)
2014-05-30 7:22 ` [U-Boot] [PATCH 5/9] arm: ls102xa: Add esdhc " Alison Wang
@ 2014-05-30 7:22 ` Alison Wang
2014-05-30 7:23 ` [U-Boot] [PATCH 7/9] driver/ddr/freescale: Fix DDR3 driver for ARM Alison Wang
` (3 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Alison Wang @ 2014-05-30 7:22 UTC (permalink / raw)
To: u-boot
From: York Sun <yorksun@freescale.com>
If less than 8 ECC pins are used for DDR data bus width smaller than 64
bits, the 8-bit ECC code will be transmitted/received across several beats,
and it will be used to check 64-bits of data once 8-bits of ECC are
accumulated.
Signed-off-by: York Sun <yorksun@freescale.com>
---
drivers/ddr/fsl/ctrl_regs.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c
index 78e82bb..4c7a1e8 100644
--- a/drivers/ddr/fsl/ctrl_regs.c
+++ b/drivers/ddr/fsl/ctrl_regs.c
@@ -693,6 +693,7 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
unsigned int x32_en = 0; /* x32 enable */
unsigned int pchb8 = 0; /* precharge bit 8 enable */
unsigned int hse; /* Global half strength override */
+ unsigned int acc_ecc_en = 0; /* Accumulated ECC enable */
unsigned int mem_halt = 0; /* memory controller halt */
unsigned int bi = 0; /* Bypass initialization */
@@ -736,6 +737,9 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
ba_intlv_ctl = popts->ba_intlv_ctl;
hse = popts->half_strength_driver_enable;
+ /* set when ddr bus width < 64 */
+ acc_ecc_en = (dbw != 0 && ecc_en == 1) ? 1 : 0;
+
ddr->ddr_sdram_cfg = (0
| ((mem_en & 0x1) << 31)
| ((sren & 0x1) << 30)
@@ -752,6 +756,7 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
| ((x32_en & 0x1) << 5)
| ((pchb8 & 0x1) << 4)
| ((hse & 0x1) << 3)
+ | ((acc_ecc_en & 0x1) << 2)
| ((mem_halt & 0x1) << 1)
| ((bi & 0x1) << 0)
);
--
1.8.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 7/9] driver/ddr/freescale: Fix DDR3 driver for ARM
2014-05-30 7:22 [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Alison Wang
` (5 preceding siblings ...)
2014-05-30 7:22 ` [U-Boot] [PATCH 6/9] driver/ddr/freescale: Add support of accumulate ECC Alison Wang
@ 2014-05-30 7:23 ` Alison Wang
2014-05-30 7:23 ` [U-Boot] [PATCH 8/9] driver/ddr/fsl: Add support of overriding chip select write leveling Alison Wang
` (2 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Alison Wang @ 2014-05-30 7:23 UTC (permalink / raw)
To: u-boot
From: York Sun <yorksun@freescale.com>
Reading DDR register should use ddr_in32() for proper endianess.
This patch fixes incorrect waiting time for ARM platforms.
Signed-off-by: York Sun <yorksun@freescale.com>
---
drivers/ddr/fsl/arm_ddr_gen3.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ddr/fsl/arm_ddr_gen3.c b/drivers/ddr/fsl/arm_ddr_gen3.c
index d4ed9ae..59f2fd6 100644
--- a/drivers/ddr/fsl/arm_ddr_gen3.c
+++ b/drivers/ddr/fsl/arm_ddr_gen3.c
@@ -194,7 +194,7 @@ step2:
* For example, 2GB on 666MT/s 64-bit bus takes about 402ms
* Let's wait for 800ms
*/
- bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
+ bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK)
>> SDRAM_CFG_DBW_SHIFT);
timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
(get_ddr_freq(0) >> 20)) << 1;
--
1.8.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 8/9] driver/ddr/fsl: Add support of overriding chip select write leveling
2014-05-30 7:22 [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Alison Wang
` (6 preceding siblings ...)
2014-05-30 7:23 ` [U-Boot] [PATCH 7/9] driver/ddr/freescale: Fix DDR3 driver for ARM Alison Wang
@ 2014-05-30 7:23 ` Alison Wang
2014-05-30 7:23 ` [U-Boot] [PATCH 9/9] arm: ls102xa: Add basic support for LS1021AQDS board Alison Wang
2014-05-30 13:07 ` [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Andrew Dyer
9 siblings, 0 replies; 15+ messages in thread
From: Alison Wang @ 2014-05-30 7:23 UTC (permalink / raw)
To: u-boot
From: York Sun <yorksun@freescale.com>
JEDEC spec allows DRAM vendors to use prime DQ for write leveling. This
is not an issue unless some DQ pins are not connected. If a platform uses
regular DIMMs but with reduced DDR ECC pins, the prime DQ may end up on
those floating pins for the second rank. The workaround is to use a known
good chip select for this purpose.
Signed-off-by: York Sun <yorksun@freescale.com>
---
drivers/ddr/fsl/ctrl_regs.c | 3 +++
drivers/ddr/fsl/interactive.c | 2 ++
include/fsl_ddr_sdram.h | 2 ++
3 files changed, 7 insertions(+)
diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c
index 4c7a1e8..0cf0400 100644
--- a/drivers/ddr/fsl/ctrl_regs.c
+++ b/drivers/ddr/fsl/ctrl_regs.c
@@ -2273,6 +2273,9 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
if (ip_rev > 0x40400)
unq_mrs_en = 1;
+ if (ip_rev > 0x40700)
+ ddr->debug[18] = popts->cswl_override;
+
set_ddr_sdram_cfg_2(ddr, popts, unq_mrs_en);
set_ddr_sdram_mode(ddr, popts, common_dimm,
cas_latency, additive_latency, unq_mrs_en);
diff --git a/drivers/ddr/fsl/interactive.c b/drivers/ddr/fsl/interactive.c
index cfe1e1f..cdb12de 100644
--- a/drivers/ddr/fsl/interactive.c
+++ b/drivers/ddr/fsl/interactive.c
@@ -510,6 +510,7 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo,
CTRL_OPTIONS(wrlvl_override),
CTRL_OPTIONS(wrlvl_sample),
CTRL_OPTIONS(wrlvl_start),
+ CTRL_OPTIONS(cswl_override),
CTRL_OPTIONS(rcw_override),
CTRL_OPTIONS(rcw_1),
CTRL_OPTIONS(rcw_2),
@@ -800,6 +801,7 @@ static void print_memctl_options(const memctl_options_t *popts)
CTRL_OPTIONS(wrlvl_override),
CTRL_OPTIONS(wrlvl_sample),
CTRL_OPTIONS(wrlvl_start),
+ CTRL_OPTIONS_HEX(cswl_override),
CTRL_OPTIONS(rcw_override),
CTRL_OPTIONS(rcw_1),
CTRL_OPTIONS(rcw_2),
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index e8a2db9..987119b 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -281,6 +281,7 @@ typedef struct memctl_options_partial_s {
#define DDR_DATA_BUS_WIDTH_64 0
#define DDR_DATA_BUS_WIDTH_32 1
#define DDR_DATA_BUS_WIDTH_16 2
+#define DDR_CSWL_CS0 0x04000001
/*
* Generalized parameters for memory controller configuration,
* might be a little specific to the FSL memory controller
@@ -340,6 +341,7 @@ typedef struct memctl_options_s {
unsigned int cpo_override;
unsigned int write_data_delay; /* DQS adjust */
+ unsigned int cswl_override;
unsigned int wrlvl_override;
unsigned int wrlvl_sample; /* Write leveling */
unsigned int wrlvl_start;
--
1.8.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 9/9] arm: ls102xa: Add basic support for LS1021AQDS board
2014-05-30 7:22 [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Alison Wang
` (7 preceding siblings ...)
2014-05-30 7:23 ` [U-Boot] [PATCH 8/9] driver/ddr/fsl: Add support of overriding chip select write leveling Alison Wang
@ 2014-05-30 7:23 ` Alison Wang
2014-05-30 18:28 ` Fabio Estevam
2014-05-30 13:07 ` [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Andrew Dyer
9 siblings, 1 reply; 15+ messages in thread
From: Alison Wang @ 2014-05-30 7:23 UTC (permalink / raw)
To: u-boot
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Jason Jin <jason.jin@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
---
board/freescale/ls1021aqds/Makefile | 8 +
board/freescale/ls1021aqds/README | 112 +++++++
board/freescale/ls1021aqds/ddr.c | 169 +++++++++++
board/freescale/ls1021aqds/ddr.h | 64 ++++
board/freescale/ls1021aqds/ls1021aqds.c | 208 +++++++++++++
board/freescale/ls1021aqds/ls1021aqds_qixis.h | 35 +++
boards.cfg | 1 +
include/common.h | 5 +-
include/configs/ls1021aqds.h | 418 ++++++++++++++++++++++++++
9 files changed, 1017 insertions(+), 3 deletions(-)
create mode 100644 board/freescale/ls1021aqds/Makefile
create mode 100644 board/freescale/ls1021aqds/README
create mode 100644 board/freescale/ls1021aqds/ddr.c
create mode 100644 board/freescale/ls1021aqds/ddr.h
create mode 100644 board/freescale/ls1021aqds/ls1021aqds.c
create mode 100644 board/freescale/ls1021aqds/ls1021aqds_qixis.h
create mode 100644 include/configs/ls1021aqds.h
diff --git a/board/freescale/ls1021aqds/Makefile b/board/freescale/ls1021aqds/Makefile
new file mode 100644
index 0000000..96c8c4c
--- /dev/null
+++ b/board/freescale/ls1021aqds/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright 2014 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ls1021aqds.o
+obj-y += ddr.o
diff --git a/board/freescale/ls1021aqds/README b/board/freescale/ls1021aqds/README
new file mode 100644
index 0000000..c561776
--- /dev/null
+++ b/board/freescale/ls1021aqds/README
@@ -0,0 +1,112 @@
+Overview
+--------
+The LS1021AQDS is a Freescale reference board that hosts the LS1021A SoC.
+
+LS1021A SoC Overview
+------------------
+The QorIQ LS1 family, which includes the LS1021A communications processor,
+is built on Layerscape architecture, the industry's first software-aware,
+core-agnostic networking architecture to offer unprecedented efficiency
+and scale.
+
+A member of the value-performance tier, the QorIQ LS1021A processor provides
+extensive integration and power efficiency for fanless, small form factor
+enterprise networking applications. Incorporating dual ARM Cortex-A7 cores
+running up to 1.0 GHz, the LS1021A processor delivers pre-silicon CoreMark
+performance of over 6,000, as well as virtualization support, advanced
+security features and the broadest array of high-speed interconnects and
+optimized peripheral features ever offered in a sub-3 W processor.
+
+The QorIQ LS1021A processor features an integrated LCD controller,
+CAN controller for implementing industrial protocols, DDR3L/4 running
+up to 1600 MHz, integrated security engine and QUICC Engine, and ECC
+protection on both L1 and L2 caches. The LS1021A processor is pin- and
+software-compatible with the QorIQ LS1020A and LS1022A processors.
+
+The LS1021A SoC includes the following function and features:
+
+ - ARM Cortex-A7 MPCore compliant with ARMv7-A architecture
+ - Dual high-preformance ARM Cortex-A7 cores, each core includes:
+ - 32 Kbyte L1 Instruction Cache and Data Cache for each core (ECC protection)
+ - 512 Kbyte shared coherent L2 Cache (with ECC protection)
+ - NEON Co-processor (per core)
+ - 40-bit physical addressing
+ - Vector floating-point support
+ - ARM Core-Link CCI-400 Cache Coherent Interconnect
+ - One DDR3L/DDR4 SDRAM memory controller with x8/x16/x32-bit configuration
+ supporting speeds up to 1600Mtps
+ - ECC and interleaving support
+ - VeTSEC Ethernet complex
+ - Up to 3x virtualized 10/100/1000 Ethernet controllers
+ - MII, RMII, RGMII, and SGMII support
+ - QoS, lossless flow control, and IEEE 1588 support
+ - 4-lane 6GHz SerDes
+ - High speed interconnect (4 SerDes lanes with are muxed for these protocol)
+ - Two PCI Express Gen2 controllers running at up to 5 GHz
+ - One Serial ATA 3.0 supporting 6 GT/s operation
+ - Two SGMII interfaces supporting 1000 Mbps
+ - Additional peripheral interfaces
+ - One high-speed USB 3.0 controller with integrated PHY and one high-speed
+ USB 2.00 controller with ULPI
+ - Integrated flash controller (IFC) with 16-bit interface
+ - Quad SPI NOR Flash
+ - One enhanced Secure digital host controller
+ - Display controller unit (DCU) 24-bit RGB (12-bit DDR pin interface)
+ - Ten UARTs comprised of two 16550 compliant DUARTs, and six low power
+ UARTs
+ - Three I2C controllers
+ - Eight FlexTimers four supporting PWM and four FlexCAN ports
+ - Four GPIO controllers supporting up to 109 general purpose I/O signals
+ - Integrated advanced audio block:
+ - Four synchronous audio interfaces (SAI)
+ - Sony/Philips Digital Interconnect Format (SPDIF)
+ - Asynchronous Sample Rate Converter (ASRC)
+ - Hardware based crypto offload engine
+ - IPSec forwarding at up to 1Gbps
+ - QorIQ Trust Architecture, Secure Boot, and ARM TrustZone supported
+ - Public key hardware accelerator
+ - True Random Number Generator (NIST Certified)
+ - Advanced Encryption Standard Accelerators (AESA)
+ - Data Encryption Standard Accelerators
+ - QUICC Engine ULite block
+ - Two universal communication controllers (TDM and HDLC) supporting 64
+ multichannels, each running at 64 Kbps
+ - Support for 256 channels of HDLC
+ - QorIQ TrustArchitecture with Secure Boot, as well as ARM TrustZone supported
+
+LS1021AQDS board Overview
+-------------------------
+ - DDR Controller
+ - Supports rates of up to 1600 MHz data-rate
+ - Supports one DDR3LP UDIMM, of single-, dual- types.
+ - IFC/Local Bus
+ - NAND flash: 512M 8-bit NAND flash
+ - NOR: 128MB 16-bit NOR Flash
+ - Ethernet
+ - Three on-board RGMII 10/100/1G ethernet ports.
+ - FPGA
+ - Clocks
+ - System and DDR clock (SYSCLK, DDRCLK)
+ - SERDES clocks
+ - Power Supplies
+ - SDHC
+ - SDHC/SDXC connector
+ - Other IO
+ - Two Serial ports
+ - Three I2C ports
+
+Memory map
+-----------
+The addresses in brackets are physical addresses.
+
+Start Address End Address Description Size
+0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB
+0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB
+0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB
+0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB
+0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB
+0x00_4000_0000 0x00_5FFF_FFFF QSPI 512MB
+0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB
+0x00_7E80_0000 0x00_7E80_FFFF IFC - NAND Flash 64KB
+0x00_7FB0_0000 0x00_7FB0_0FFF IFC - FPGA 4KB
+0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB
diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c
new file mode 100644
index 0000000..bf05e34
--- /dev/null
+++ b/board/freescale/ls1021aqds/ddr.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include "ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+ ulong ddr_freq;
+
+ if (ctrl_num > 3) {
+ printf("Not supported controller number %d\n", ctrl_num);
+ return;
+ }
+ if (!pdimm->n_ranks)
+ return;
+
+ /*
+ * we use identical timing for all slots. If needed, change the code
+ * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
+ */
+ if (popts->registered_dimm_en)
+ pbsp = rdimms[0];
+ else
+ pbsp = udimms[0];
+
+
+ /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
+ */
+ ddr_freq = get_ddr_freq(0) / 1000000;
+ while (pbsp->datarate_mhz_high) {
+ if (pbsp->n_ranks == pdimm->n_ranks) {
+ if (ddr_freq <= pbsp->datarate_mhz_high) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->wrlvl_start = pbsp->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ popts->cpo_override = pbsp->cpo_override;
+ popts->write_data_delay = pbsp->write_data_delay;
+ goto found;
+ }
+ pbsp_highest = pbsp;
+ }
+ pbsp++;
+ }
+
+ if (pbsp_highest) {
+ printf("Error: board specific timing not found for data rate %lu MT/s\n"
+ "Trying to use the highest speed (%u) parameters\n",
+ ddr_freq, pbsp_highest->datarate_mhz_high);
+ popts->clk_adjust = pbsp_highest->clk_adjust;
+ popts->wrlvl_start = pbsp_highest->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ } else {
+ panic("DIMM is not supported by this board");
+ }
+found:
+ debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
+ "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, "
+ "wrlvl_ctrl_3 0x%x\n",
+ pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
+ pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
+ pbsp->wrlvl_ctl_3);
+
+ /* force DDR bus width to 32 bits */
+ popts->data_bus_width = 1;
+ popts->otf_burst_chop_en = 0;
+ popts->burst_length = DDR_BL8;
+
+ /*
+ * Factors to consider for half-strength driver enable:
+ * - number of DIMMs installed
+ */
+ popts->half_strength_driver_enable = 1;
+ /*
+ * Write leveling override
+ */
+ popts->wrlvl_override = 1;
+ popts->wrlvl_sample = 0xf;
+ popts->cswl_override = DDR_CSWL_CS0;
+
+ /*
+ * Rtt and Rtt_WR override
+ */
+ popts->rtt_override = 0;
+
+ /* Enable ZQ calibration */
+ popts->zq_en = 1;
+
+ /* DHC_EN =1, ODT = 75 Ohm */
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+}
+
+#ifdef CONFIG_SYS_DDR_RAW_TIMING
+dimm_params_t ddr_raw_timing = {
+ .n_ranks = 1,
+ .rank_density = 1073741824u,
+ .capacity = 1073741824u,
+ .primary_sdram_width = 32,
+ .ec_sdram_width = 0,
+ .registered_dimm = 0,
+ .mirrored_dimm = 0,
+ .n_row_addr = 15,
+ .n_col_addr = 10,
+ .n_banks_per_sdram_device = 8,
+ .edc_config = 0,
+ .burst_lengths_bitmask = 0x0c,
+
+ .tckmin_x_ps = 1071,
+ .caslat_x = 0xfe << 4, /* 5,6,7,8 */
+ .taa_ps = 13125,
+ .twr_ps = 15000,
+ .trcd_ps = 13125,
+ .trrd_ps = 7500,
+ .trp_ps = 13125,
+ .tras_ps = 37500,
+ .trc_ps = 50625,
+ .trfc_ps = 160000,
+ .twtr_ps = 7500,
+ .trtp_ps = 7500,
+ .refresh_rate_ps = 7800000,
+ .tfaw_ps = 37500,
+};
+
+int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
+ unsigned int controller_number,
+ unsigned int dimm_number)
+{
+ static const char dimm_model[] = "Fixed DDR on board";
+
+ if (((controller_number == 0) && (dimm_number == 0)) ||
+ ((controller_number == 1) && (dimm_number == 0))) {
+ memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
+ memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+ memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+ }
+
+ return 0;
+}
+#endif
+
+phys_size_t initdram(int board_type)
+{
+ phys_size_t dram_size;
+
+ puts("Initializing DDR....using SPD\n");
+ dram_size = fsl_ddr_sdram();
+
+ return dram_size;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = gd->ram_size;
+}
diff --git a/board/freescale/ls1021aqds/ddr.h b/board/freescale/ls1021aqds/ddr.h
new file mode 100644
index 0000000..814d210
--- /dev/null
+++ b/board/freescale/ls1021aqds/ddr.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DDR_H__
+#define __DDR_H__
+struct board_specific_parameters {
+ u32 n_ranks;
+ u32 datarate_mhz_high;
+ u32 rank_gb;
+ u32 clk_adjust;
+ u32 wrlvl_start;
+ u32 wrlvl_ctl_2;
+ u32 wrlvl_ctl_3;
+ u32 cpo_override;
+ u32 write_data_delay;
+ u32 force_2t;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+static const struct board_specific_parameters rdimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3
+ */
+ {2, 2140, 0, 4, 4, 0x0, 0x0},
+ {1, 2140, 0, 6, 4, 0x0, 0x0},
+ {}
+};
+
+static const struct board_specific_parameters udimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
+ */
+ {1, 833, 1, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0},
+ {1, 1350, 1, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
+ {1, 833, 2, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0},
+ {1, 1350, 2, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
+ {2, 833, 4, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0},
+ {2, 1350, 4, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
+ {2, 1350, 0, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0},
+ {2, 1666, 4, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0},
+ {2, 1666, 0, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0},
+ {}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+ udimm0,
+};
+
+static const struct board_specific_parameters *rdimms[] = {
+ rdimm0,
+};
+
+#endif
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
new file mode 100644
index 0000000..12f85c3
--- /dev/null
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/clock.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <fsl_ifc.h>
+#include <netdev.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+
+#include "../common/qixis.h"
+#include "ls1021aqds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ char buf[64];
+ u8 sw;
+
+ puts("Board: LS1021AQDS\n");
+
+ printf("Sys ID:0x%02x, Sys Ver: 0x%02x, ",
+ QIXIS_READ(id), QIXIS_READ(arch));
+
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+ if (sw < 0x8)
+ printf("vBank: %d\n", sw);
+ else if (sw == 0x8)
+ puts("PromJet\n");
+ else if (sw == 0x9)
+ puts("NAND\n");
+ else if (sw == 0x15)
+ printf("IFCCard\n");
+ else
+ printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+
+ printf("FPGA: v%d (%s), build %d\n",
+ (int)QIXIS_READ(scver), qixis_read_tag(buf),
+ (int)qixis_read_minor());
+
+ return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch (sysclk_conf & 0x0f) {
+ case QIXIS_SYSCLK_64:
+ return 64000000;
+ case QIXIS_SYSCLK_83:
+ return 83333333;
+ case QIXIS_SYSCLK_100:
+ return 100000000;
+ case QIXIS_SYSCLK_125:
+ return 125000000;
+ case QIXIS_SYSCLK_133:
+ return 133333333;
+ case QIXIS_SYSCLK_150:
+ return 150000000;
+ case QIXIS_SYSCLK_160:
+ return 160000000;
+ case QIXIS_SYSCLK_166:
+ return 166666666;
+ }
+ return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+ u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch ((ddrclk_conf & 0x30) >> 4) {
+ case QIXIS_DDRCLK_100:
+ return 100000000;
+ case QIXIS_DDRCLK_125:
+ return 125000000;
+ case QIXIS_DDRCLK_133:
+ return 133333333;
+ }
+ return 66666666;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = initdram(0);
+
+ return 0;
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg[1] = {
+ {CONFIG_SYS_FSL_ESDHC_ADDR},
+};
+
+int board_mmc_init(bd_t *bis)
+{
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
+}
+#endif
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+ int ret;
+
+ ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+ if (ret) {
+ puts("PCA: failed to select proper channel\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+ struct fsl_pq_mdio_info mdio_info;
+ struct tsec_info_struct tsec_info[4];
+ int num = 0;
+
+#ifdef CONFIG_TSEC1
+ SET_STD_TSEC_INFO(tsec_info[num], 1);
+ num++;
+#endif
+#ifdef CONFIG_TSEC2
+ SET_STD_TSEC_INFO(tsec_info[num], 2);
+ num++;
+#endif
+#ifdef CONFIG_TSEC3
+ SET_STD_TSEC_INFO(tsec_info[num], 3);
+ num++;
+#endif
+ if (!num) {
+ printf("No TSECs initialized\n");
+ return 0;
+ }
+
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
+ tsec_eth_init(bis, tsec_info, num);
+
+ return pci_eth_init(bis);
+}
+#endif
+
+int board_early_init_f(void)
+{
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+#ifdef CONFIG_TSEC_ENET
+ out_be32(&scfg->etsecdmamcr, 0xf058001f);
+#endif
+
+#ifdef CONFIG_FSL_IFC
+ init_early_memctl_regs();
+#endif
+
+ out_be32(CONFIG_SYS_CCI400_ADDR, 0x08000000);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
+ out_be32(CONFIG_SYS_CCI400_ADDR, 0);
+
+ return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+}
+
+u8 flash_read8(void *addr)
+{
+ return __raw_readb(addr + 1);
+}
+
+void flash_write16(u16 val, void *addr)
+{
+ u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
+ __raw_writew(shftval, addr);
+}
+
+u16 flash_read16(void *addr)
+{
+ u16 val = __raw_readw(addr);
+ return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
+}
diff --git a/board/freescale/ls1021aqds/ls1021aqds_qixis.h b/board/freescale/ls1021aqds/ls1021aqds_qixis.h
new file mode 100644
index 0000000..09b3be2
--- /dev/null
+++ b/board/freescale/ls1021aqds/ls1021aqds_qixis.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS1021AQDS_QIXIS_H__
+#define __LS1021AQDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for LS1021AQDS */
+
+/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
+#define BRDCFG4_EMISEL_MASK 0xe0
+#define BRDCFG4_EMISEL_SHIFT 5
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66 0x0
+#define QIXIS_SYSCLK_83 0x1
+#define QIXIS_SYSCLK_100 0x2
+#define QIXIS_SYSCLK_125 0x3
+#define QIXIS_SYSCLK_133 0x4
+#define QIXIS_SYSCLK_150 0x5
+#define QIXIS_SYSCLK_160 0x6
+#define QIXIS_SYSCLK_166 0x7
+#define QIXIS_SYSCLK_64 0x8
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_66 0x0
+#define QIXIS_DDRCLK_100 0x1
+#define QIXIS_DDRCLK_125 0x2
+#define QIXIS_DDRCLK_133 0x3
+
+#define QIXIS_SRDS1CLK_100 0x0
+
+#endif
diff --git a/boards.cfg b/boards.cfg
index 81e28ba..f07a7ae 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -298,6 +298,7 @@ Active arm armv7 exynos samsung trats2
Active arm armv7 exynos samsung universal_c210 s5pc210_universal - Przemyslaw Marczak <p.marczak@samsung.com>
Active arm armv7 highbank - highbank highbank - Rob Herring <rob.herring@calxeda.com>
Active arm armv7 keystone ti k2hk_evm k2hk_evm - Vitaly Andrianov <vitalya@ti.com>
+Active arm armv7 ls102xa freescale ls1021aqds ls1021aqds_nor ls1021aqds -
Active arm armv7 mx5 denx m53evk m53evk m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg Marek Vasut <marek.vasut@gmail.com>
Active arm armv7 mx5 esg ima3-mx53 ima3-mx53 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg -
Active arm armv7 mx5 freescale mx51evk mx51evk mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg Stefano Babic <sbabic@denx.de>
diff --git a/include/common.h b/include/common.h
index 232136c..a42d6d2 100644
--- a/include/common.h
+++ b/include/common.h
@@ -693,9 +693,6 @@ ulong get_PERCLK3(void);
ulong get_bus_freq (ulong);
int get_serial_clock(void);
-#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
-ulong get_ddr_freq(ulong);
-#endif
#if defined(CONFIG_MPC85xx)
typedef MPC85xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
@@ -711,6 +708,8 @@ static inline ulong get_ddr_freq(ulong dummy)
{
return get_bus_freq(dummy);
}
+#else
+ulong get_ddr_freq(ulong);
#endif
#if defined(CONFIG_4xx)
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
new file mode 100644
index 0000000..b62278e
--- /dev/null
+++ b/include/configs/ls1021aqds.h
@@ -0,0 +1,418 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <config_cmd_default.h>
+
+#define CONFIG_LS102xA
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
+
+#define OCRAM_BASE_ADDR 0x10000000
+#define OCRAM_SIZE 0x00020000
+
+#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0x67f80000
+#endif
+
+/*
+ * Generic Timer Definitions
+ */
+#define GENERIC_TIMER_CLK 12500000
+
+#ifndef __ASSEMBLY__
+unsigned long get_board_sys_clk(void);
+unsigned long get_board_ddr_clk(void);
+#endif
+
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
+#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_DDR_SPD
+#define SPD_EEPROM_ADDRESS 0x51
+#define CONFIG_SYS_SPD_BUS_NUM 0
+#define CONFIG_SYS_DDR_RAW_TIMING
+
+#define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+#define CONFIG_CHIP_SELECTS_PER_CTRL 4
+
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+
+#define CONFIG_SYS_HAS_SERDES
+
+/*
+ * IFC Definitions
+ */
+#define CONFIG_FSL_IFC
+#define CONFIG_SYS_FLASH_BASE 0x60000000
+#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+
+#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
+#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR1_CSPR_EXT (0x0)
+#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
+ + 0x8000000) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
+
+#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | CSOR_NOR_NOR_MODE_AVD_NOR | \
+ CSOR_NOR_TRHZ_80)
+#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | FTIM0_NOR_TEADC(0x5) | \
+ FTIM0_NOR_TEAHC(0x5))
+#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1e) | FTIM1_NOR_TRAD_NOR(0x3f))
+#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | FTIM2_NOR_TCH(0x4) | \
+ FTIM2_NOR_TWP(0x3f))
+#define CONFIG_SYS_NOR_FTIM3 0
+
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS 45
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS, \
+ CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
+
+/*
+ * NAND Flash Definitions
+ */
+#define CONFIG_NAND_FSL_IFC
+
+#define CONFIG_SYS_NAND_BASE 0x7e800000
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+
+#define CONFIG_SYS_NAND_CSPR_EXT (0x0)
+
+#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_NAND \
+ | CSPR_V)
+#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
+#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
+ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
+ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
+ | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \
+ | CSOR_NAND_PGS_2K /* Page Size = 2K */ \
+ | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \
+ | CSOR_NAND_PB(64)) /* 64 Pages Per Block */
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x7) | \
+ FTIM0_NAND_TWP(0x18) | \
+ FTIM0_NAND_TWCHT(0x7) | \
+ FTIM0_NAND_TWH(0xa))
+#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
+ FTIM1_NAND_TWBE(0x39) | \
+ FTIM1_NAND_TRR(0xe) | \
+ FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0xf) | \
+ FTIM2_NAND_TREH(0xa) | \
+ FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3 0x0
+
+#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE}
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+
+/*
+ * QIXIS Definitions
+ */
+#define CONFIG_FSL_QIXIS
+
+#ifdef CONFIG_FSL_QIXIS
+#define QIXIS_BASE 0x7fb00000
+#define QIXIS_BASE_PHYS QIXIS_BASE
+#define CONFIG_SYS_I2C_FPGA_ADDR 0x66
+#define QIXIS_LBMAP_SWITCH 6
+#define QIXIS_LBMAP_MASK 0x0f
+#define QIXIS_LBMAP_SHIFT 0
+#define QIXIS_LBMAP_DFLTBANK 0x00
+#define QIXIS_LBMAP_ALTBANK 0x04
+#define QIXIS_RST_CTL_RESET 0x44
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+
+#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
+#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_GPCM \
+ | CSPR_V)
+#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
+#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | CSOR_NOR_NOR_MODE_AVD_NOR | \
+ CSOR_NOR_TRHZ_80)
+
+/*
+ * QIXIS Timing parameters for IFC GPCM
+ */
+#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xe) | \
+ FTIM0_GPCM_TEADC(0xe) | \
+ FTIM0_GPCM_TEAHC(0xe))
+#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xe) | \
+ FTIM1_GPCM_TRAD(0x1f))
+#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xe) | \
+ FTIM2_GPCM_TCH(0xe) | \
+ FTIM2_GPCM_TWP(0xf0))
+#define CONFIG_SYS_FPGA_FTIM3 0x0
+#endif
+
+#if defined(CONFIG_NAND)
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT
+#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR
+#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK
+#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR
+#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0
+#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1
+#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2
+#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3
+#else
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT
+#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR
+#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK
+#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR
+#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0
+#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1
+#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2
+#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3
+#endif
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_serial_clock()
+
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * I2C
+ */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+
+/*
+ * I2C bus multiplexer
+ */
+#define I2C_MUX_PCA_ADDR_PRI 0x77
+#define I2C_MUX_CH_DEFAULT 0x8
+
+/*
+ * MMC
+ */
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_GENERIC_MMC
+
+/*
+ * eTSEC
+ */
+#define CONFIG_TSEC_ENET
+
+#ifdef CONFIG_TSEC_ENET
+#define CONFIG_MII
+#define CONFIG_MII_DEFAULT_TSEC 3
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC1"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC2"
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "eTSEC3"
+
+#define TSEC1_PHY_ADDR 1
+#define TSEC2_PHY_ADDR 2
+#define TSEC3_PHY_ADDR 3
+
+#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC3_PHYIDX 0
+
+#define CONFIG_ETHPRIME "eTSEC1"
+
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_REALTEK
+
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+
+#define CONFIG_FSL_SGMII_RISER 1
+#define SGMII_RISER_PHY_OFFSET 0x1b
+
+#ifdef CONFIG_FSL_SGMII_RISER
+#define CONFIG_SYS_TBIPA_VALUE 8
+#endif
+
+#endif
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_CMDLINE_EDITING
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_HWCONFIG
+#define HWCONFIG_BUFFER_SIZE 128
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "ethaddr=00:e0:0c:bc:e5:60\0" \
+ "eth1addr=00:e0:0c:bc:e5:61\0" \
+ "eth2addr=00:e0:0c:bc:e5:62\0" \
+ "eth3addr=00:e0:0c:bc:e5:63\0" \
+ "ipaddr=192.168.1.100\0" \
+ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
+ "fdt_high=0xcfffffff\0" \
+ "initrd_high=0xcfffffff\0" \
+ "boot_bank0=i2c mw 0x66 0x50 0x40;i2c mw 0x66 0x10 0x20;i2c mw 0x66 0x10 0x21\0" \
+ "boot_bank4=i2c mw 0x66 0x50 0x44;i2c mw 0x66 0x10 0x20;i2c mw 0x66 0x10 0x21\0" \
+ "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+
+#define CONFIG_SYS_LOAD_ADDR 0x82000000
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (30 * 1024)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_CMD_BOOTZ
+
+#endif
--
1.8.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support
2014-05-30 7:22 [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Alison Wang
` (8 preceding siblings ...)
2014-05-30 7:23 ` [U-Boot] [PATCH 9/9] arm: ls102xa: Add basic support for LS1021AQDS board Alison Wang
@ 2014-05-30 13:07 ` Andrew Dyer
9 siblings, 0 replies; 15+ messages in thread
From: Andrew Dyer @ 2014-05-30 13:07 UTC (permalink / raw)
To: u-boot
No comment on the commit itself, but does it really need all of the
marketing BS at the top?
On May 30, 2014 3:22 AM, "Alison Wang" <b18965@freescale.com> wrote:
> This series contain the support for Freescale LS102xA SoC and LS1021AQDS
> board.
>
> The QorIQ LS1 family is built on Layerscape architecture, the industry's
> first
> software-aware, core-agnostic networking architecture to offer
> unprecedented
> efficiency and scale.
>
> Freescale LS102xA is a set of SoCs combines two ARM Cortex-A7 cores that
> have
> been optimized for high reliability and pack the highest level of
> integration
> available for sub-3 W embedded communications processors with Layerscape
> architecture and with a comprehensive enablement model focused on ease of
> programmability.
>
> For the detail information about LS1021AQDS board, please refer to README
> in the patch.
>
> ----------------------------------------------------------------
> Alison Wang (5):
> arm: ls102xa: Add Freescale LS102xA SoC support
> arm: ls102xa: Add i2c support for LS102xA
> arm: ls102xa: Add etsec support for LS102xA
> arm: ls102xa: Add esdhc support for LS102xA
> arm: ls102xa: Add basic support for LS1021AQDS board
>
> Claudiu Manoil (1):
> net: Merge asm/fsl_enet.h into fsl_mdio.h
>
> York Sun (3):
> driver/ddr/freescale: Add support of accumulate ECC
> driver/ddr/freescale: Fix DDR3 driver for ARM
> driver/ddr/fsl: Add support of overriding chip select write leveling
>
> arch/powerpc/include/asm/fsl_enet.h | 24 --
> board/freescale/ls1021aqds/Makefile | 8 +
> board/freescale/ls1021aqds/README | 112 +++++++++
> board/freescale/ls1021aqds/ddr.c | 169 +++++++++++++
> board/freescale/ls1021aqds/ddr.h | 64 +++++
> board/freescale/ls1021aqds/ls1021aqds.c | 208 ++++++++++++++++
> board/freescale/ls1021aqds/ls1021aqds_qixis.h | 35 +++
> board/freescale/mpc8360emds/mpc8360emds.c | 2 +-
> board/freescale/mpc837xemds/mpc837xemds.c | 1 -
> boards.cfg | 1 +
> drivers/ddr/fsl/arm_ddr_gen3.c | 2 +-
> drivers/ddr/fsl/ctrl_regs.c | 8 +
> drivers/ddr/fsl/interactive.c | 2 +
> drivers/i2c/mxc_i2c.c | 2 +-
> drivers/mmc/fsl_esdhc.c | 4 +-
> drivers/net/fm/dtsec.c | 1 -
> drivers/net/fm/fm.h | 2 +-
> drivers/net/fm/init.c | 1 +
> drivers/net/fm/memac.c | 1 -
> drivers/net/fm/tgec.c | 1 -
> drivers/net/fsl_mdio.c | 16 +-
> drivers/net/tsec.c | 7 +
> drivers/qe/uec.h | 1 -
> include/common.h | 5 +-
> include/configs/ls1021aqds.h | 418
> ++++++++++++++++++++++++++++++++
> include/fm_eth.h | 2 +-
> include/fsl_ddr_sdram.h | 2 +
> include/fsl_esdhc.h | 14 +-
> include/fsl_mdio.h | 13 +-
> include/tsec.h | 7 +-
> 30 files changed, 1087 insertions(+), 46 deletions(-)
> delete mode 100644 arch/powerpc/include/asm/fsl_enet.h
> create mode 100644 board/freescale/ls1021aqds/Makefile
> create mode 100644 board/freescale/ls1021aqds/README
> create mode 100644 board/freescale/ls1021aqds/ddr.c
> create mode 100644 board/freescale/ls1021aqds/ddr.h
> create mode 100644 board/freescale/ls1021aqds/ls1021aqds.c
> create mode 100644 board/freescale/ls1021aqds/ls1021aqds_qixis.h
> create mode 100644 include/configs/ls1021aqds.h
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 9/9] arm: ls102xa: Add basic support for LS1021AQDS board
2014-05-30 7:23 ` [U-Boot] [PATCH 9/9] arm: ls102xa: Add basic support for LS1021AQDS board Alison Wang
@ 2014-05-30 18:28 ` Fabio Estevam
2014-05-30 20:48 ` Otavio Salvador
2014-06-02 6:45 ` Huan Wang
0 siblings, 2 replies; 15+ messages in thread
From: Fabio Estevam @ 2014-05-30 18:28 UTC (permalink / raw)
To: u-boot
On Fri, May 30, 2014 at 4:23 AM, Alison Wang <b18965@freescale.com> wrote:
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "ethaddr=00:e0:0c:bc:e5:60\0" \
> + "eth1addr=00:e0:0c:bc:e5:61\0" \
> + "eth2addr=00:e0:0c:bc:e5:62\0" \
> + "eth3addr=00:e0:0c:bc:e5:63\0" \
> + "ipaddr=192.168.1.100\0" \
You should not hardcode any ethaddr/ipaddr.
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 9/9] arm: ls102xa: Add basic support for LS1021AQDS board
2014-05-30 18:28 ` Fabio Estevam
@ 2014-05-30 20:48 ` Otavio Salvador
2014-06-02 6:45 ` Huan Wang
1 sibling, 0 replies; 15+ messages in thread
From: Otavio Salvador @ 2014-05-30 20:48 UTC (permalink / raw)
To: u-boot
On Fri, May 30, 2014 at 3:28 PM, Fabio Estevam <festevam@gmail.com> wrote:
> On Fri, May 30, 2014 at 4:23 AM, Alison Wang <b18965@freescale.com> wrote:
>
>> +#define CONFIG_EXTRA_ENV_SETTINGS \
>> + "ethaddr=00:e0:0c:bc:e5:60\0" \
>> + "eth1addr=00:e0:0c:bc:e5:61\0" \
>> + "eth2addr=00:e0:0c:bc:e5:62\0" \
>> + "eth3addr=00:e0:0c:bc:e5:63\0" \
>> + "ipaddr=192.168.1.100\0" \
>
> You should not hardcode any ethaddr/ipaddr.
and forgot to add the board maintainer.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 9/9] arm: ls102xa: Add basic support for LS1021AQDS board
2014-05-30 18:28 ` Fabio Estevam
2014-05-30 20:48 ` Otavio Salvador
@ 2014-06-02 6:45 ` Huan Wang
1 sibling, 0 replies; 15+ messages in thread
From: Huan Wang @ 2014-06-02 6:45 UTC (permalink / raw)
To: u-boot
Hi, Fabio,
On Fri, May 30, 2014 at 4:23 AM, Alison Wang <b18965@freescale.com> wrote:
> +#define CONFIG_EXTRA_ENV_SETTINGS????? \
> +?????? "ethaddr=00:e0:0c:bc:e5:60\0"?? \
> +?????? "eth1addr=00:e0:0c:bc:e5:61\0"? \
> +?????? "eth2addr=00:e0:0c:bc:e5:62\0"? \
> +?????? "eth3addr=00:e0:0c:bc:e5:63\0"? \
> +?????? "ipaddr=192.168.1.100\0"??????? \
You should not hardcode any ethaddr/ipaddr.
[Alison Wang] I will remove them in v2. Thanks.
Best Regards,
Alison Wang
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH 1/9] arm: ls102xa: Add Freescale LS102xA SoC support
2014-05-30 7:22 ` [U-Boot] [PATCH 1/9] arm: ls102xa: Add Freescale LS102xA SoC support Alison Wang
@ 2014-06-03 14:36 ` Diana Craciun
0 siblings, 0 replies; 15+ messages in thread
From: Diana Craciun @ 2014-06-03 14:36 UTC (permalink / raw)
To: u-boot
On 05/30/2014 10:22 AM, Alison Wang wrote:
> The QorIQ LS1 family is built on Layerscape architecture,
> the industry's first software-aware, core-agnostic networking
> architecture to offer unprecedented efficiency and scale.
>
> Freescale LS102xA is a set of SoCs combines two ARM
> Cortex-A7 cores that have been optimized for high
> reliability and pack the highest level of integration
> available for sub-3 W embedded communications processors
> with Layerscape architecture and with a comprehensive
> enablement model focused on ease of programmability.
>
> Signed-off-by: Alison Wang <alison.wang@freescale.com>
> Signed-off-by: Jason Jin <jason.jin@freescale.com>
> Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> ---
> arch/arm/cpu/armv7/ls102xa/Makefile | 11 +
> arch/arm/cpu/armv7/ls102xa/clock.c | 131 +++++++
> arch/arm/cpu/armv7/ls102xa/cpu.c | 102 ++++++
> arch/arm/cpu/armv7/ls102xa/fdt.c | 82 +++++
> arch/arm/cpu/armv7/ls102xa/timer.c | 129 +++++++
> arch/arm/include/asm/arch-ls102xa/clock.h | 23 ++
> arch/arm/include/asm/arch-ls102xa/config.h | 70 ++++
> arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 420 ++++++++++++++++++++++
> arch/arm/include/asm/arch-ls102xa/imx-regs.h | 53 +++
> arch/arm/include/asm/config.h | 4 +
> arch/arm/include/asm/io.h | 8 +-
> drivers/watchdog/Makefile | 2 +-
> 12 files changed, 1033 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/ls102xa/Makefile
> create mode 100644 arch/arm/cpu/armv7/ls102xa/clock.c
> create mode 100644 arch/arm/cpu/armv7/ls102xa/cpu.c
> create mode 100644 arch/arm/cpu/armv7/ls102xa/fdt.c
> create mode 100644 arch/arm/cpu/armv7/ls102xa/timer.c
> create mode 100644 arch/arm/include/asm/arch-ls102xa/clock.h
> create mode 100644 arch/arm/include/asm/arch-ls102xa/config.h
> create mode 100644 arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
> create mode 100644 arch/arm/include/asm/arch-ls102xa/imx-regs.h
>
> diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile
> new file mode 100644
> index 0000000..7ef793a
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/ls102xa/Makefile
> @@ -0,0 +1,11 @@
> +#
> +# Copyright 2014 Freescale Semiconductor, Inc.
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y += cpu.o
> +obj-y += clock.o
> +obj-y += timer.o
> +
> +obj-$(CONFIG_OF_LIBFDT) += fdt.o
> diff --git a/arch/arm/cpu/armv7/ls102xa/clock.c b/arch/arm/cpu/armv7/ls102xa/clock.c
> new file mode 100644
> index 0000000..75bb0e9
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/ls102xa/clock.c
> @@ -0,0 +1,131 @@
> +/*
> + * Copyright 2014 Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/immap_ls102xa.h>
> +#include <asm/arch/clock.h>
> +#include <fsl_ifc.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
> +#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
> +#endif
> +
> +void get_sys_info(struct sys_info *sys_info)
> +{
> + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
> +#ifdef CONFIG_FSL_IFC
> + struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
> + u32 ccr;
> +#endif
> + struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_LS1_CLK_ADDR);
> + unsigned int cpu;
> + const u8 core_cplx_pll[6] = {
> + [0] = 0, /* CC1 PPL / 1 */
> + [1] = 0, /* CC1 PPL / 2 */
> + [4] = 1, /* CC2 PPL / 1 */
> + [5] = 1, /* CC2 PPL / 2 */
> + };
> +
> + const u8 core_cplx_pll_div[6] = {
> + [0] = 1, /* CC1 PPL / 1 */
> + [1] = 2, /* CC1 PPL / 2 */
> + [4] = 1, /* CC2 PPL / 1 */
> + [5] = 2, /* CC2 PPL / 2 */
> + };
> +
> + uint i;
> + uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
> + uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
> + unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
> +
> + sys_info->freq_systembus = sysclk;
> +#ifdef CONFIG_DDR_CLK_FREQ
> + sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
> +#else
> + sys_info->freq_ddrbus = sysclk;
> +#endif
> +
> + sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >>
> + RCWSR0_SYS_PLL_RAT_SHIFT) & RCWSR0_SYS_PLL_RAT_MASK;
> + sys_info->freq_ddrbus *= (in_be32(&gur->rcwsr[0]) >>
> + RCWSR0_MEM_PLL_RAT_SHIFT) & RCWSR0_MEM_PLL_RAT_MASK;
> +
> + for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
> + ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0x3f;
> + if (ratio[i] > 4)
> + freq_c_pll[i] = sysclk * ratio[i];
> + else
> + freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
> + }
> +
> + for (cpu = 0; cpu < CONFIG_MAX_CPUS; cpu++) {
> + u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27)
> + & 0xf;
> + u32 cplx_pll = core_cplx_pll[c_pll_sel];
> +
> + sys_info->freq_processor[cpu] =
> + freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
> + }
> +
> +#if defined(CONFIG_FSL_IFC)
> + ccr = in_be32(&ifc_regs->ifc_ccr);
> + ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
> +
> + sys_info->freq_localbus = sys_info->freq_systembus / ccr;
> +#endif
> +}
> +
> +
> +int get_clocks(void)
> +{
> + struct sys_info sys_info;
> +
> + get_sys_info(&sys_info);
> + gd->cpu_clk = sys_info.freq_processor[0];
> + gd->bus_clk = sys_info.freq_systembus;
> + gd->mem_clk = sys_info.freq_ddrbus * 2;
> +
> +#if defined(CONFIG_FSL_ESDHC)
> + gd->arch.sdhc_clk = gd->bus_clk;
> +#endif
> +
> + return 0;
> +}
> +
> +ulong get_bus_freq(ulong dummy)
> +{
> + return gd->bus_clk;
> +}
> +
> +ulong get_ddr_freq(ulong dummy)
> +{
> + return gd->mem_clk;
> +}
> +
> +int get_serial_clock(void)
> +{
> + return gd->bus_clk / 2;
> +}
> +
> +unsigned int mxc_get_clock(enum mxc_clock clk)
> +{
> + switch (clk) {
> + case MXC_I2C_CLK:
> + return get_bus_freq(0) / 2;
> + case MXC_ESDHC_CLK:
> + return get_bus_freq(0);
> + case MXC_DSPI_CLK:
> + return get_bus_freq(0) / 2;
> + case MXC_UART_CLK:
> + return get_bus_freq(0) / 2;
> + default:
> + printf("Unsupported clock\n");
> + }
> + return 0;
> +}
> diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
> new file mode 100644
> index 0000000..72d198f
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
> @@ -0,0 +1,102 @@
> +/*
> + * Copyright 2014 Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/arch/clock.h>
> +#include <asm/io.h>
> +#include <asm/arch/immap_ls102xa.h>
> +#include <tsec.h>
> +#include <netdev.h>
> +#include <fsl_esdhc.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#if defined(CONFIG_DISPLAY_CPUINFO)
> +int print_cpuinfo(void)
> +{
> + char buf[32];
> + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
> + unsigned int svr, major, minor, ver, i;
> +
> + svr = in_be32(&gur->svr);
> + major = SVR_MAJ(svr);
> + minor = SVR_MIN(svr);
> +
> + puts("CPU: Freescale LayerScape ");
> +
> + ver = SVR_SOC_VER(svr);
> + switch (ver) {
> + case SOC_VER_SLS1020:
> + puts("SLS1020");
> + break;
> + case SOC_VER_LS1020:
> + puts("LS1020");
> + break;
> + case SOC_VER_LS1021:
> + puts("LS1021");
> + break;
> + case SOC_VER_LS1022:
> + puts("LS1022");
> + break;
> + default:
> + puts("Unknown");
> + break;
> + }
> +
> + if (IS_E_PROCESSOR(svr) && (ver != SOC_VER_SLS1020))
> + puts("E");
> +
> + printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
> +
> + puts("Clock Configuration:");
> +
> + printf("\n CPU0(ARMV7):%-4s MHz, ", strmhz(buf, gd->cpu_clk));
> + printf("\n Bus:%-4s MHz, ", strmhz(buf, gd->bus_clk));
> + printf("DDR:%-4s MHz, ", strmhz(buf, gd->mem_clk));
> + puts("\n");
> +
> + /* Display the RCW, so that no one gets confused as to what RCW
> + * we're actually using for this boot.
> + */
> + puts("Reset Configuration Word (RCW):");
> + for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
> + u32 rcw = in_be32(&gur->rcwsr[i]);
> +
> + if ((i % 4) == 0)
> + printf("\n %08x:", i * 4);
> + printf(" %08x", rcw);
> + }
> + puts("\n");
> +
> + return 0;
> +}
> +#endif
> +
> +void enable_caches(void)
> +{
> +#ifndef CONFIG_SYS_ICACHE_OFF
> + icache_enable();
> +#endif
> +#ifndef CONFIG_SYS_DCACHE_OFF
> + dcache_enable();
> +#endif
> +}
> +
> +#ifdef CONFIG_FSL_ESDHC
> +int cpu_mmc_init(bd_t *bis)
> +{
> + return fsl_esdhc_mmc_init(bis);
> +}
> +#endif
> +
> +int cpu_eth_init(bd_t *bis)
> +{
> +#ifdef CONFIG_TSEC_ENET
> + tsec_standard_init(bis);
> +#endif
> +
> + return 0;
> +}
> diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
> new file mode 100644
> index 0000000..042d457
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
> @@ -0,0 +1,82 @@
> +/*
> + * Copyright 2014 Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <libfdt.h>
> +#include <fdt_support.h>
> +#include <asm/io.h>
> +#include <asm/processor.h>
> +#include <asm/arch/clock.h>
> +#include <linux/ctype.h>
> +#ifdef CONFIG_FSL_ESDHC
> +#include <fsl_esdhc.h>
> +#endif
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +void fdt_add_enet_stashing(void *fdt)
> +{
> + do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1);
> + do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1);
> + do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1);
> +}
> +
> +void ft_cpu_setup(void *blob, bd_t *bd)
> +{
> + int off;
> + int val;
> + unsigned long busclk = get_bus_freq(0);
> +
> + fdt_fixup_ethernet(blob);
> +
> + fdt_add_enet_stashing(blob);
> +
> + off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
> + while (off != -FDT_ERR_NOTFOUND) {
> + val = gd->cpu_clk;
> + fdt_setprop(blob, off, "clock-frequency", &val, 4);
> + off = fdt_node_offset_by_prop_value(blob, off,
> + "device_type", "cpu", 4);
> + }
> +
> + do_fixup_by_prop_u32(blob,
> + "device_type", "soc", 4, "bus-frequency", busclk / 2, 1);
> +
> +#ifdef CONFIG_SYS_NS16550
> + do_fixup_by_compat_u32(blob, "ns16550",
> + "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
> +#endif
> +
> + do_fixup_by_compat_u32(blob, "fsl,sys-clock",
> + "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
> +
> +#if defined(CONFIG_FSL_ESDHC)
> + fdt_fixup_esdhc(blob, bd);
> +#endif
> +
> + /*
> + * platform bus clock = system bus clock/2
> + * Here busclk = system bus clock
> + * We are using the platform bus clock as 1588 Timer reference
> + * clock source select
> + */
> + do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer",
> + "timer-frequency", busclk / 2, 1);
> +
> + /*
> + * clock-freq should change to clock-frequency and
> + * flexcan-v1.0 should change to p1010-flexcan respectively
> + * in the future.
> + */
> + do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
> + "clock_freq", busclk / 2, 1);
> +
> + do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
> + "clock-frequency", busclk / 2, 1);
> +
> + do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan",
> + "clock-frequency", busclk / 2, 1);
> +}
> diff --git a/arch/arm/cpu/armv7/ls102xa/timer.c b/arch/arm/cpu/armv7/ls102xa/timer.c
> new file mode 100644
> index 0000000..db5eb65
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/ls102xa/timer.c
> @@ -0,0 +1,129 @@
> +/*
> + * Copyright 2014 Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <div64.h>
> +#include <asm/arch/immap_ls102xa.h>
> +#include <asm/arch/clock.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * This function is intended for SHORT delays only.
> + * It will overflow at around 10 seconds @ 400MHz,
> + * or 20 seconds @ 200MHz.
> + */
> +unsigned long usec2ticks(unsigned long usec)
> +{
> + ulong ticks;
> +
> + if (usec < 1000)
> + ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
> + else
> + ticks = ((usec / 10) * (get_tbclk() / 100000));
> +
> + return ticks;
> +}
> +
> +static inline unsigned long long tick_to_time(unsigned long long tick)
> +{
> + unsigned long freq;
> +
> + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
> +
> + tick *= CONFIG_SYS_HZ;
> + do_div(tick, freq);
> +
> + return tick;
> +}
> +
> +static inline unsigned long long us_to_tick(unsigned long long usec)
> +{
> + unsigned long freq;
> +
> + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
> +
> + usec = usec * freq + 999999;
> + do_div(usec, 1000000);
> +
> + return usec;
> +}
> +
> +int timer_init(void)
> +{
> + struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR;
> + unsigned long ctrl, val, freq;
> +
> + /* Enable System Counter */
> + writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr);
> +
> + freq = GENERIC_TIMER_CLK;
> + asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
> +
> + /* Set PL1 Physical Timer Ctrl */
> + ctrl = ARCH_TIMER_CTRL_ENABLE;
> + asm("mcr p15, 0, %0, c14, c2, 1" : : "r" (ctrl));
> +
> + /* Set PL1 Physical Comp Value */
> + val = TIMER_COMP_VAL;
> + asm("mcrr p15, 2, %Q0, %R0, c14" : : "r" (val));
> +
> + gd->arch.tbl = 0;
> + gd->arch.tbu = 0;
> +
> + return 0;
> +}
> +
> +unsigned long long get_ticks(void)
> +{
> + unsigned long long now;
> +
> + asm("mrrc p15, 0, %Q0, %R0, c14" : "=r" (now));
> +
> + /* increment tbu if tbl has rolled over */
> + if (now < gd->arch.tbl)
> + gd->arch.tbu++;
> + gd->arch.tbl = now;
> +
> + return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
> +}
> +
> +unsigned long get_timer_masked(void)
> +{
> + return tick_to_time(get_ticks());
> +}
> +
> +unsigned long get_timer(ulong base)
> +{
> + return get_timer_masked() - base;
> +}
> +
> +/* delay x useconds and preserve advance timstamp value */
> +void __udelay(unsigned long usec)
> +{
> + unsigned long long start;
> + unsigned long tmo;
> +
> + start = get_ticks(); /* get current timestamp */
> + tmo = us_to_tick(usec); /* convert usecs to ticks */
> +
> + while ((get_ticks() - start) < tmo)
> + ; /* loop till time has passed */
> +}
> +
> +/*
> + * This function is derived from PowerPC code (timebase clock frequency).
> + * On ARM it returns the number of timer ticks per second.
> + */
> +unsigned long get_tbclk(void)
> +{
> + unsigned long freq;
> +
> + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
> +
> + return freq;
> +}
> diff --git a/arch/arm/include/asm/arch-ls102xa/clock.h b/arch/arm/include/asm/arch-ls102xa/clock.h
> new file mode 100644
> index 0000000..fd36bb0
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-ls102xa/clock.h
> @@ -0,0 +1,23 @@
> +/*
> + * Copyright 2014 Freescale Semiconductor, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + *
> + */
> +
> +#ifndef __ASM_ARCH_LS102XA_CLOCK_H_
> +#define __ASM_ARCH_LS102XA_CLOCK_H_
> +
> +#include <common.h>
> +
> +enum mxc_clock {
> + MXC_ARM_CLK = 0,
> + MXC_UART_CLK,
> + MXC_ESDHC_CLK,
> + MXC_I2C_CLK,
> + MXC_DSPI_CLK,
> +};
> +
> +unsigned int mxc_get_clock(enum mxc_clock clk);
> +
> +#endif /* __ASM_ARCH_LS102XA_CLOCK_H_ */
> diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
> new file mode 100644
> index 0000000..2e90c94
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-ls102xa/config.h
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright 2014, Freescale Semiconductor
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _ASM_ARMV7_LS102xA_CONFIG_
> +#define _ASM_ARMV7_LS102xA_CONFIG_
> +
> +#define CONFIG_SYS_IMMR 0x01000000
> +
> +#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
> +#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000)
> +#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
> +#define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000)
> +#define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000)
> +#define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000)
> +#define CONFIG_SYS_FSL_LS1_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000)
> +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500)
> +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500)
> +
> +#define CONFIG_SYS_CCI400_ADDR 0x01180000
> +
> +#define CONFIG_SYS_TSEC1_OFFSET 0x01d10000
> +#define CONFIG_SYS_TSEC2_OFFSET 0x01d50000
> +#define CONFIG_SYS_TSEC3_OFFSET 0x01d90000
> +#define CONFIG_SYS_MDIO1_OFFSET 0x01d24000
> +
> +#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
> +#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
> +
> +#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
> +
> +#define SCTR_BASE_ADDR (CONFIG_SYS_IMMR + 0x01b00000)
> +
> +#define I2C1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01180000)
> +#define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01190000)
> +#define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x011a0000)
> +
> +#define WDOG1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01ad0000)
> +
> +#define QSPI0_BASE_ADDR (CONFIG_SYS_IMMR + 0x00550000)
> +#define DSPI1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01100000)
> +
> +#define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000)
> +
> +#define CONFIG_SYS_FSL_DDR_BE
> +#define CONFIG_VERY_BIG_RAM
> +#define CONFIG_SYS_FSL_DDRC_ARM_GEN3
> +#define CONFIG_SYS_FSL_DDR
> +#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
> +#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS1_DDR_BLOCK1_SIZE
> +
> +#define CONFIG_SYS_FSL_IFC_BE
> +#define CONFIG_SYS_FSL_ESDHC_BE
> +#define CONFIG_SYS_FSL_WDOG_BE
> +#define CONFIG_SYS_FSL_DSPI_BE
> +#define CONFIG_SYS_FSL_QSPI_BE
> +
> +#define CONFIG_SYS_FSL_SRDS_1
> +
What about CONFIG_ARMV7_VIRT? This config allows the kernel to be
entered in the HYP mode which is a prerequisite for running KVM which we
need to support.
Diana
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2014-06-03 14:36 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-05-30 7:22 [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 1/9] arm: ls102xa: Add Freescale LS102xA SoC support Alison Wang
2014-06-03 14:36 ` Diana Craciun
2014-05-30 7:22 ` [U-Boot] [PATCH 2/9] arm: ls102xa: Add i2c support for LS102xA Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 3/9] net: Merge asm/fsl_enet.h into fsl_mdio.h Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 4/9] arm: ls102xa: Add etsec support for LS102xA Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 5/9] arm: ls102xa: Add esdhc " Alison Wang
2014-05-30 7:22 ` [U-Boot] [PATCH 6/9] driver/ddr/freescale: Add support of accumulate ECC Alison Wang
2014-05-30 7:23 ` [U-Boot] [PATCH 7/9] driver/ddr/freescale: Fix DDR3 driver for ARM Alison Wang
2014-05-30 7:23 ` [U-Boot] [PATCH 8/9] driver/ddr/fsl: Add support of overriding chip select write leveling Alison Wang
2014-05-30 7:23 ` [U-Boot] [PATCH 9/9] arm: ls102xa: Add basic support for LS1021AQDS board Alison Wang
2014-05-30 18:28 ` Fabio Estevam
2014-05-30 20:48 ` Otavio Salvador
2014-06-02 6:45 ` Huan Wang
2014-05-30 13:07 ` [U-Boot] [PATCH v1 0/9] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS board support Andrew Dyer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.