From: Ben Dooks <ben.dooks@codethink.co.uk> To: linux-kernel@lists.codethink.co.uk, linux-sh@vger.kernel.org, linux-media@vger.kernel.org Cc: robert.jarzmik@free.fr, g.liakhovetski@gmx.de, magnus.damm@opensource.se, horms@verge.net.au, ian.molton@codethink.co.uk, william.towle@codethink.co.uk, Ben Dooks <ben.dooks@codethink.co.uk> Subject: [PATCH 8/9] r8a7790.dtsi: add vin[0-3] nodes Date: Sun, 15 Jun 2014 19:56:33 +0000 [thread overview] Message-ID: <1402862194-17743-9-git-send-email-ben.dooks@codethink.co.uk> (raw) In-Reply-To: <1402862194-17743-1-git-send-email-ben.dooks@codethink.co.uk> Add nodes for the four video input channels on the R8A7790. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> --- arch/arm/boot/dts/r8a7790.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 7ff2960..a6f083d 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -33,6 +33,10 @@ spi2 = &msiof1; spi3 = &msiof2; spi4 = &msiof3; + vin0 = &vin0; + vin1 = &vin1; + vin2 = &vin2; + vin3 = &vin3; }; cpus { @@ -462,6 +466,38 @@ status = "disabled"; }; + vin0: vin@e6ef0000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN0>; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin1: vin@e6ef1000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN1>; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin2: vin@e6ef2000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN2>; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin3: vin@e6ef3000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN3>; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; -- 2.0.0
WARNING: multiple messages have this Message-ID (diff)
From: Ben Dooks <ben.dooks@codethink.co.uk> To: linux-kernel@lists.codethink.co.uk, linux-sh@vger.kernel.org, linux-media@vger.kernel.org Cc: robert.jarzmik@free.fr, g.liakhovetski@gmx.de, magnus.damm@opensource.se, horms@verge.net.au, ian.molton@codethink.co.uk, william.towle@codethink.co.uk, Ben Dooks <ben.dooks@codethink.co.uk> Subject: [PATCH 8/9] r8a7790.dtsi: add vin[0-3] nodes Date: Sun, 15 Jun 2014 20:56:33 +0100 [thread overview] Message-ID: <1402862194-17743-9-git-send-email-ben.dooks@codethink.co.uk> (raw) In-Reply-To: <1402862194-17743-1-git-send-email-ben.dooks@codethink.co.uk> Add nodes for the four video input channels on the R8A7790. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> --- arch/arm/boot/dts/r8a7790.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 7ff2960..a6f083d 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -33,6 +33,10 @@ spi2 = &msiof1; spi3 = &msiof2; spi4 = &msiof3; + vin0 = &vin0; + vin1 = &vin1; + vin2 = &vin2; + vin3 = &vin3; }; cpus { @@ -462,6 +466,38 @@ status = "disabled"; }; + vin0: vin@e6ef0000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN0>; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin1: vin@e6ef1000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN1>; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin2: vin@e6ef2000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN2>; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin3: vin@e6ef3000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN3>; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; -- 2.0.0
next prev parent reply other threads:[~2014-06-15 19:56 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-06-15 19:56 RFC: new soc_camera/rcar_vin patch series Ben Dooks 2014-06-15 19:56 ` Ben Dooks 2014-06-15 19:56 ` [PATCH 1/9] ARM: lager: enable i2c devices Ben Dooks 2014-06-15 19:56 ` Ben Dooks 2014-06-16 12:29 ` Sergei Shtylyov 2014-06-16 12:29 ` Sergei Shtylyov 2014-06-15 19:56 ` [PATCH 2/9] ARM: lager: add i2c1, i2c2 pins Ben Dooks 2014-06-15 19:56 ` Ben Dooks 2014-06-16 12:33 ` Sergei Shtylyov 2014-06-16 12:33 ` Sergei Shtylyov 2014-06-18 7:27 ` Ben Dooks 2014-06-18 7:27 ` Ben Dooks 2014-06-18 7:31 ` Simon Horman 2014-06-18 7:31 ` Simon Horman 2014-06-15 19:56 ` [PATCH 3/9] adv7180: Remove duplicate unregister call Ben Dooks 2014-06-15 19:56 ` Ben Dooks 2014-06-15 19:56 ` [PATCH 4/9] adv7180: add of match table Ben Dooks 2014-06-15 19:56 ` Ben Dooks 2014-06-15 19:56 ` [PATCH 5/9] rcar_vin: copy flags from pdata Ben Dooks 2014-06-15 19:56 ` Ben Dooks 2014-06-15 19:56 ` [PATCH 6/9] rcar_vin: add devicetree support Ben Dooks 2014-06-15 19:56 ` Ben Dooks 2014-06-15 19:56 ` [PATCH 7/9] soc_camera: add support for dt binding soc_camera drivers Ben Dooks 2014-06-15 19:56 ` Ben Dooks 2014-06-19 7:28 ` Guennadi Liakhovetski 2014-06-19 7:28 ` Guennadi Liakhovetski 2014-06-23 21:05 ` Ben Dooks 2014-06-23 21:05 ` Ben Dooks 2014-06-15 19:56 ` Ben Dooks [this message] 2014-06-15 19:56 ` [PATCH 8/9] r8a7790.dtsi: add vin[0-3] nodes Ben Dooks 2014-06-15 19:56 ` [PATCH 9/9] ARM: lager: add vin1 node Ben Dooks 2014-06-15 19:56 ` Ben Dooks 2014-06-17 19:02 ` Sergei Shtylyov 2014-06-17 19:02 ` Sergei Shtylyov 2014-06-15 19:59 ` [Linux-kernel] RFC: new soc_camera/rcar_vin patch series Ben Dooks 2014-06-15 19:59 ` Ben Dooks
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1402862194-17743-9-git-send-email-ben.dooks@codethink.co.uk \ --to=ben.dooks@codethink.co.uk \ --cc=g.liakhovetski@gmx.de \ --cc=horms@verge.net.au \ --cc=ian.molton@codethink.co.uk \ --cc=linux-kernel@lists.codethink.co.uk \ --cc=linux-media@vger.kernel.org \ --cc=linux-sh@vger.kernel.org \ --cc=magnus.damm@opensource.se \ --cc=robert.jarzmik@free.fr \ --cc=william.towle@codethink.co.uk \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.