From: Harini Katakam <harinik@xilinx.com> To: linus.walleij@linaro.org, gnurou@gmail.com, grant.likely@linaro.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, rob@landley.net Cc: michal.simek@xilinx.com, soren.brinkmann@xilinx.com, linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org, harinikatakamlinux@gmail.com, Harini Katakam <harini.katakam@xilinx.com>, Harini Katakam <harinik@xilinx.com> Subject: [PATCH v2 2/2] devicetree: Add Zynq GPIO devicetree bindings documentation Date: Wed, 18 Jun 2014 17:09:37 +0530 [thread overview] Message-ID: <1403091577-10232-2-git-send-email-harinik@xilinx.com> (raw) In-Reply-To: <1403091577-10232-1-git-send-email-harinik@xilinx.com> From: Harini Katakam <harini.katakam@xilinx.com> Add gpio-zynq bindings documentation. Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> --- v2 changes: Improve description. --- .../devicetree/bindings/gpio/gpio-zynq.txt | 24 ++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-zynq.txt diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt new file mode 100644 index 0000000..b2c023a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt @@ -0,0 +1,24 @@ +Xilinx Zynq GPIO controller Device Tree Bindings +------------------------------------------- + +Required properties: +- #gpio-cells : Should be two. First cell is used to mention + pin number. +- compatible : Should be "xlnx,zynq-gpio-1.0" +- clocks : Clock specifier (see clock bindings for details) +- gpio-controller : Marks the device node as a GPIO controller. +- interrupts : Interrupt specifier (see interrupt bindings for + details) +- interrupt-parent : Must be core interrupt controller +- reg : Address and length of the register set for the device + +Example: + gpio@e000a000 { + #gpio-cells = <2>; + compatible = "xlnx,zynq-gpio-1.0"; + clocks = <&clkc 42>; + gpio-controller; + interrupt-parent = <&intc>; + interrupts = <0 20 4>; + reg = <0xe000a000 0x1000>; + }; -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: harinik@xilinx.com (Harini Katakam) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 2/2] devicetree: Add Zynq GPIO devicetree bindings documentation Date: Wed, 18 Jun 2014 17:09:37 +0530 [thread overview] Message-ID: <1403091577-10232-2-git-send-email-harinik@xilinx.com> (raw) In-Reply-To: <1403091577-10232-1-git-send-email-harinik@xilinx.com> From: Harini Katakam <harini.katakam@xilinx.com> Add gpio-zynq bindings documentation. Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> --- v2 changes: Improve description. --- .../devicetree/bindings/gpio/gpio-zynq.txt | 24 ++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-zynq.txt diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt new file mode 100644 index 0000000..b2c023a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt @@ -0,0 +1,24 @@ +Xilinx Zynq GPIO controller Device Tree Bindings +------------------------------------------- + +Required properties: +- #gpio-cells : Should be two. First cell is used to mention + pin number. +- compatible : Should be "xlnx,zynq-gpio-1.0" +- clocks : Clock specifier (see clock bindings for details) +- gpio-controller : Marks the device node as a GPIO controller. +- interrupts : Interrupt specifier (see interrupt bindings for + details) +- interrupt-parent : Must be core interrupt controller +- reg : Address and length of the register set for the device + +Example: + gpio at e000a000 { + #gpio-cells = <2>; + compatible = "xlnx,zynq-gpio-1.0"; + clocks = <&clkc 42>; + gpio-controller; + interrupt-parent = <&intc>; + interrupts = <0 20 4>; + reg = <0xe000a000 0x1000>; + }; -- 1.7.9.5
next prev parent reply other threads:[~2014-06-18 11:39 UTC|newest] Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-06-18 11:39 [PATCH v2 1/2] gpio: Add driver for Zynq GPIO controller Harini Katakam 2014-06-18 11:39 ` Harini Katakam 2014-06-18 11:39 ` Harini Katakam [this message] 2014-06-18 11:39 ` [PATCH v2 2/2] devicetree: Add Zynq GPIO devicetree bindings documentation Harini Katakam 2014-07-07 14:53 ` Linus Walleij 2014-07-07 14:53 ` Linus Walleij 2014-07-07 17:35 ` Sören Brinkmann 2014-07-07 17:35 ` Sören Brinkmann 2014-07-07 17:35 ` Sören Brinkmann [not found] ` <1403091577-10232-1-git-send-email-harinik-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org> 2014-06-18 15:36 ` [PATCH v2 1/2] gpio: Add driver for Zynq GPIO controller Sören Brinkmann 2014-06-18 15:36 ` Sören Brinkmann 2014-06-18 15:36 ` Sören Brinkmann 2014-07-07 14:51 ` Linus Walleij 2014-07-07 14:51 ` Linus Walleij 2014-07-07 14:51 ` Linus Walleij 2014-07-07 15:23 ` Baruch Siach 2014-07-07 15:23 ` Baruch Siach 2014-07-07 15:23 ` Baruch Siach 2014-07-08 9:27 ` Linus Walleij 2014-07-08 9:27 ` Linus Walleij 2014-07-11 6:28 ` Baruch Siach 2014-07-11 6:28 ` Baruch Siach 2014-07-11 12:06 ` Linus Walleij 2014-07-11 12:06 ` Linus Walleij 2014-07-11 12:06 ` Linus Walleij 2014-07-11 12:27 ` Baruch Siach 2014-07-11 12:27 ` Baruch Siach 2014-07-11 12:38 ` Linus Walleij 2014-07-11 12:38 ` Linus Walleij 2014-07-07 16:08 ` Sören Brinkmann 2014-07-07 16:08 ` Sören Brinkmann 2014-07-07 16:08 ` Sören Brinkmann 2014-07-08 9:34 ` Linus Walleij 2014-07-08 9:34 ` Linus Walleij 2014-07-08 9:34 ` Linus Walleij 2014-07-08 15:55 ` Sören Brinkmann 2014-07-08 15:55 ` Sören Brinkmann 2014-07-08 15:55 ` Sören Brinkmann 2014-07-10 8:57 ` Linus Walleij 2014-07-10 8:57 ` Linus Walleij 2014-07-10 8:57 ` Linus Walleij 2014-07-07 14:45 ` Linus Walleij 2014-07-07 14:45 ` Linus Walleij 2014-07-07 17:33 ` Sören Brinkmann 2014-07-07 17:33 ` Sören Brinkmann 2014-07-07 17:33 ` Sören Brinkmann
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1403091577-10232-2-git-send-email-harinik@xilinx.com \ --to=harinik@xilinx.com \ --cc=devicetree@vger.kernel.org \ --cc=galak@codeaurora.org \ --cc=gnurou@gmail.com \ --cc=grant.likely@linaro.org \ --cc=harini.katakam@xilinx.com \ --cc=harinikatakamlinux@gmail.com \ --cc=ijc+devicetree@hellion.org.uk \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=michal.simek@xilinx.com \ --cc=pawel.moll@arm.com \ --cc=rob@landley.net \ --cc=robh+dt@kernel.org \ --cc=soren.brinkmann@xilinx.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.