* [PATCHv2 00/32] ARM: at91: Switch remaining SoCs and boards to CCF
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni,
Douglas Gilbert, Gregory Hermant, Joachim Eastwood,
Fabio Porcedda, Jiri Prchal, Tim Schendekehl, Gael Portay,
Rodolfo Giometti
This patch set adds support for the common clock framwork to the remaining atml
SoCs: at91rm9200, at91sam9260, at91sam9263, at91sam9g45.
It also defines the necessary main crystal and slow crystal frequencies.
I couldn't find datasheets for the following boards:
- mpa1600
- ge863-pro3
- animeo_ip
- tny_a9260
For those, I assumed the 32kHz crystal is present on the board as this is the
most common implementation (only one board doesn't have it). Please correct me
if this is wrong.
I could not test at91rm9200 as I don't own any board with that chip.
Changes in v2:
- Drop patch 3 that has been taken in the clock tree
- rename tcb*_clk in tc*_clk for rm9200 an sam9260
- rename tc0_clk in tcb_clk for sam9263
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Cc: Joachim Eastwood <manabian@gmail.com>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
Cc: Tim Schendekehl <tim.schendekehl@egnite.de>
Cc: Gael Portay <g.portay@overkiz.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Alexandre Belloni (33):
Alexandre Belloni (32):
Documentation: dt: document all the atmel pmc compatibles
ARM: at91/dt: ariag25: define crystals frequencies
ARM: at91: prepare common clk transition for rm9200
ARM: at91/dt: rm9200: define clocks
ARM: at91: move at91rm9200 SoC to the CCF
ARM: at91/dt: at91rm9200ek: define crystals frequencies
ARM: at91: prepare common clk transition for sam9260
ARM: at91/dt: sam9260: define clocks
ARM: at91/dt: sam9g20: define clocks
ARM: at91: move at91sam9260 SoCs to the CCF
ARM: at91/dt: at91sam9g20ek: define crystals frequencies
ARM: at91/dt: foxg20: define crystals frequencies
ARM: at91/dt: usb_a9260: define crystals frequencies
ARM: at91/dt: tny_a9260: define crystals frequencies
ARM: at91/dt: qil_a9260: define crystals frequencies
ARM: at91/dt: mpa1600: define crytals frequencies
ARM: at91/dt: ge863-pro3: define crystals frequencies
ARM: at91/dt: ethernut5: define crystals frequencies
ARM: at91/dt: animeo_ip: define crystals frequencies
ARM: at91/dt: kizbox: define main crystal frequency
ARM: at91: prepare common clk transition for sam9g45
ARM: at91/dt: sam9g45: define clocks
ARM: at91: move at91sam9g45 SoC to the CCF
ARM: at91/dt: sam9m10g45ek: define crystals frequencies
ARM: at91/dt: pm9g45: crystals frequencies
ARM: at91/dt: cosino define crystals frequencies
ARM: at91: prepare common clk transition for sam9263
ARM: at91/dt: sam9263: define clocks
ARM: at91: move at91sam9263 SoC to the CCF
ARM: at91/dt: sam9263ek: define crystals frequencies
ARM: at91/dt: tny_a9263: define crystals frequencies
ARM: at91/dt: usb_a9263: define crystals frequencies
.../devicetree/bindings/arm/atmel-pmc.txt | 5 +-
arch/arm/boot/dts/animeo_ip.dts | 8 +
arch/arm/boot/dts/at91-ariag25.dts | 8 +
arch/arm/boot/dts/at91-cosino.dtsi | 8 +
arch/arm/boot/dts/at91-foxg20.dts | 8 +
arch/arm/boot/dts/at91-qil_a9260.dts | 8 +
arch/arm/boot/dts/at91rm9200.dtsi | 304 ++++++++++++++++++
arch/arm/boot/dts/at91rm9200ek.dts | 8 +
arch/arm/boot/dts/at91sam9260.dtsi | 314 ++++++++++++++++++-
arch/arm/boot/dts/at91sam9263.dtsi | 311 +++++++++++++++++++
arch/arm/boot/dts/at91sam9263ek.dts | 8 +
arch/arm/boot/dts/at91sam9g20.dtsi | 24 ++
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 8 +
arch/arm/boot/dts/at91sam9g45.dtsi | 340 ++++++++++++++++++++-
arch/arm/boot/dts/at91sam9m10g45ek.dts | 8 +
arch/arm/boot/dts/ethernut5.dts | 10 +
arch/arm/boot/dts/ge863-pro3.dtsi | 8 +
arch/arm/boot/dts/kizbox.dts | 4 +
arch/arm/boot/dts/mpa1600.dts | 8 +
arch/arm/boot/dts/pm9g45.dts | 8 +
arch/arm/boot/dts/tny_a9260_common.dtsi | 8 +
arch/arm/boot/dts/tny_a9263.dts | 8 +
arch/arm/boot/dts/usb_a9260_common.dtsi | 8 +
arch/arm/boot/dts/usb_a9263.dts | 8 +
arch/arm/mach-at91/Kconfig | 4 -
arch/arm/mach-at91/at91rm9200.c | 6 +-
arch/arm/mach-at91/at91sam9260.c | 6 +-
arch/arm/mach-at91/at91sam9263.c | 6 +-
arch/arm/mach-at91/at91sam9g45.c | 6 +-
29 files changed, 1457 insertions(+), 11 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 72+ messages in thread
* [PATCHv2 00/32] ARM: at91: Switch remaining SoCs and boards to CCF
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
This patch set adds support for the common clock framwork to the remaining atml
SoCs: at91rm9200, at91sam9260, at91sam9263, at91sam9g45.
It also defines the necessary main crystal and slow crystal frequencies.
I couldn't find datasheets for the following boards:
- mpa1600
- ge863-pro3
- animeo_ip
- tny_a9260
For those, I assumed the 32kHz crystal is present on the board as this is the
most common implementation (only one board doesn't have it). Please correct me
if this is wrong.
I could not test at91rm9200 as I don't own any board with that chip.
Changes in v2:
- Drop patch 3 that has been taken in the clock tree
- rename tcb*_clk in tc*_clk for rm9200 an sam9260
- rename tc0_clk in tcb_clk for sam9263
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Cc: Joachim Eastwood <manabian@gmail.com>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
Cc: Tim Schendekehl <tim.schendekehl@egnite.de>
Cc: Gael Portay <g.portay@overkiz.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Alexandre Belloni (33):
Alexandre Belloni (32):
Documentation: dt: document all the atmel pmc compatibles
ARM: at91/dt: ariag25: define crystals frequencies
ARM: at91: prepare common clk transition for rm9200
ARM: at91/dt: rm9200: define clocks
ARM: at91: move at91rm9200 SoC to the CCF
ARM: at91/dt: at91rm9200ek: define crystals frequencies
ARM: at91: prepare common clk transition for sam9260
ARM: at91/dt: sam9260: define clocks
ARM: at91/dt: sam9g20: define clocks
ARM: at91: move at91sam9260 SoCs to the CCF
ARM: at91/dt: at91sam9g20ek: define crystals frequencies
ARM: at91/dt: foxg20: define crystals frequencies
ARM: at91/dt: usb_a9260: define crystals frequencies
ARM: at91/dt: tny_a9260: define crystals frequencies
ARM: at91/dt: qil_a9260: define crystals frequencies
ARM: at91/dt: mpa1600: define crytals frequencies
ARM: at91/dt: ge863-pro3: define crystals frequencies
ARM: at91/dt: ethernut5: define crystals frequencies
ARM: at91/dt: animeo_ip: define crystals frequencies
ARM: at91/dt: kizbox: define main crystal frequency
ARM: at91: prepare common clk transition for sam9g45
ARM: at91/dt: sam9g45: define clocks
ARM: at91: move at91sam9g45 SoC to the CCF
ARM: at91/dt: sam9m10g45ek: define crystals frequencies
ARM: at91/dt: pm9g45: crystals frequencies
ARM: at91/dt: cosino define crystals frequencies
ARM: at91: prepare common clk transition for sam9263
ARM: at91/dt: sam9263: define clocks
ARM: at91: move at91sam9263 SoC to the CCF
ARM: at91/dt: sam9263ek: define crystals frequencies
ARM: at91/dt: tny_a9263: define crystals frequencies
ARM: at91/dt: usb_a9263: define crystals frequencies
.../devicetree/bindings/arm/atmel-pmc.txt | 5 +-
arch/arm/boot/dts/animeo_ip.dts | 8 +
arch/arm/boot/dts/at91-ariag25.dts | 8 +
arch/arm/boot/dts/at91-cosino.dtsi | 8 +
arch/arm/boot/dts/at91-foxg20.dts | 8 +
arch/arm/boot/dts/at91-qil_a9260.dts | 8 +
arch/arm/boot/dts/at91rm9200.dtsi | 304 ++++++++++++++++++
arch/arm/boot/dts/at91rm9200ek.dts | 8 +
arch/arm/boot/dts/at91sam9260.dtsi | 314 ++++++++++++++++++-
arch/arm/boot/dts/at91sam9263.dtsi | 311 +++++++++++++++++++
arch/arm/boot/dts/at91sam9263ek.dts | 8 +
arch/arm/boot/dts/at91sam9g20.dtsi | 24 ++
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 8 +
arch/arm/boot/dts/at91sam9g45.dtsi | 340 ++++++++++++++++++++-
arch/arm/boot/dts/at91sam9m10g45ek.dts | 8 +
arch/arm/boot/dts/ethernut5.dts | 10 +
arch/arm/boot/dts/ge863-pro3.dtsi | 8 +
arch/arm/boot/dts/kizbox.dts | 4 +
arch/arm/boot/dts/mpa1600.dts | 8 +
arch/arm/boot/dts/pm9g45.dts | 8 +
arch/arm/boot/dts/tny_a9260_common.dtsi | 8 +
arch/arm/boot/dts/tny_a9263.dts | 8 +
arch/arm/boot/dts/usb_a9260_common.dtsi | 8 +
arch/arm/boot/dts/usb_a9263.dts | 8 +
arch/arm/mach-at91/Kconfig | 4 -
arch/arm/mach-at91/at91rm9200.c | 6 +-
arch/arm/mach-at91/at91sam9260.c | 6 +-
arch/arm/mach-at91/at91sam9263.c | 6 +-
arch/arm/mach-at91/at91sam9g45.c | 6 +-
29 files changed, 1457 insertions(+), 11 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 72+ messages in thread
* [PATCHv2 01/32] Documentation: dt: document all the atmel pmc compatibles
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Documentation for atmel-pmc only list one compatible, add the remaining
compatible strings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
Documentation/devicetree/bindings/arm/atmel-pmc.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
index 389bed5056e8..795cc78543fe 100644
--- a/Documentation/devicetree/bindings/arm/atmel-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
@@ -1,7 +1,10 @@
* Power Management Controller (PMC)
Required properties:
-- compatible: Should be "atmel,at91rm9200-pmc"
+- compatible: Should be "atmel,<chip>-pmc".
+ <chip> can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12,
+ at91sam9x5, sama5d3
+
- reg: Should contain PMC registers location and length
Examples:
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 01/32] Documentation: dt: document all the atmel pmc compatibles
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Documentation for atmel-pmc only list one compatible, add the remaining
compatible strings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
Documentation/devicetree/bindings/arm/atmel-pmc.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
index 389bed5056e8..795cc78543fe 100644
--- a/Documentation/devicetree/bindings/arm/atmel-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
@@ -1,7 +1,10 @@
* Power Management Controller (PMC)
Required properties:
-- compatible: Should be "atmel,at91rm9200-pmc"
+- compatible: Should be "atmel,<chip>-pmc".
+ <chip> can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12,
+ at91sam9x5, sama5d3
+
- reg: Should contain PMC registers location and length
Examples:
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 02/32] ARM: at91/dt: ariag25: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Define Acme Systems Aria G25 board main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91-ariag25.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index 55ab6180e350..e9ced30159a7 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -42,6 +42,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 02/32] ARM: at91/dt: ariag25: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define Acme Systems Aria G25 board main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91-ariag25.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index 55ab6180e350..e9ced30159a7 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -42,6 +42,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 03/32] ARM: at91: prepare common clk transition for rm9200
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Enclose the rm9200 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
#endif"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
---
arch/arm/mach-at91/at91rm9200.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 787bb50a4dff..038702ee8bc6 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -26,10 +26,11 @@
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -277,6 +278,9 @@ static void __init at91rm9200_register_clocks(void)
clk_register(&pck2);
clk_register(&pck3);
}
+#else
+#define at91rm9200_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 03/32] ARM: at91: prepare common clk transition for rm9200
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Enclose the rm9200 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
#endif"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
---
arch/arm/mach-at91/at91rm9200.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 787bb50a4dff..038702ee8bc6 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -26,10 +26,11 @@
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -277,6 +278,9 @@ static void __init at91rm9200_register_clocks(void)
clk_register(&pck2);
clk_register(&pck3);
}
+#else
+#define at91rm9200_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 04/32] ARM: at91/dt: rm9200: define clocks
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91rm9200.dtsi | 304 ++++++++++++++++++++++++++++++++++++++
1 file changed, 304 insertions(+)
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index c61b16fba79b..65ccf564b9a5 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91RM9200 family SoC";
@@ -51,6 +52,20 @@
reg = <0x20000000 0x04000000>;
};
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -79,6 +94,260 @@
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <3>;
+ atmel,pll-clk-output-ranges = <80000000 160000000 0>,
+ <150000000 180000000 2>;
+ };
+
+ pllb: pllbck {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+ clocks = <&main>;
+ reg = <1>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <3>;
+ atmel,pll-clk-output-ranges = <80000000 160000000 0>,
+ <150000000 180000000 2>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+ atmel,clk-output-range = <0 80000000>;
+ atmel,clk-divisors = <1 2 3 4>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ atmel,clk-divisors = <1 2>;
+ clocks = <&pllb>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+
+ prog2: prog2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ interrupts = <AT91_PMC_PCKRDY(2)>;
+ };
+
+ prog3: prog3 {
+ #clock-cells = <0>;
+ reg = <3>;
+ interrupts = <AT91_PMC_PCKRDY(3)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <2>;
+ clocks = <&usb>;
+ };
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <4>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ pck2: pck2 {
+ #clock-cells = <0>;
+ reg = <10>;
+ clocks = <&prog2>;
+ };
+
+ pck3: pck3 {
+ #clock-cells = <0>;
+ reg = <11>;
+ clocks = <&prog3>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ pioD_clk: pioD_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ udc_clk: udc_clk {
+ #clock-cells = <0>;
+ reg = <11>;
+ };
+
+ twi0_clk: twi0_clk {
+ reg = <12>;
+ #clock-cells = <0>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ ssc2_clk: ssc2_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
+ tc0_clk: tc0_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tc1_clk: tc1_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ tc2_clk: tc2_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ tc3_clk: tc3_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ tc4_clk: tc4_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ tc5_clk: tc5_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ ohci_clk: ohci_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+ };
};
st: timer@fffffd00 {
@@ -93,6 +362,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
tcb1: timer@fffa4000 {
@@ -101,6 +372,8 @@
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
21 IRQ_TYPE_LEVEL_HIGH 0
22 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
i2c0: i2c@fffb8000 {
@@ -109,6 +382,7 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_twi>;
+ clocks = <&twi0_clk>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -118,6 +392,8 @@
compatible = "atmel,hsmci";
reg = <0xfffb4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -130,6 +406,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disable";
};
@@ -139,6 +417,8 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
status = "disable";
};
@@ -148,6 +428,8 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+ clocks = <&ssc2_clk>;
+ clock-names = "pclk";
status = "disable";
};
@@ -158,6 +440,8 @@
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>;
+ clock-names = "ether_clk";
status = "disabled";
};
@@ -496,6 +780,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio@fffff600 {
@@ -506,6 +791,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio@fffff800 {
@@ -516,6 +802,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
};
pioD: gpio@fffffa00 {
@@ -526,6 +813,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioD_clk>;
};
};
@@ -535,6 +823,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -546,6 +836,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -557,6 +849,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -568,6 +862,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -579,6 +875,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -586,6 +884,8 @@
compatible = "atmel,at91rm9200-udc";
reg = <0xfffb0000 0x4000>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -597,6 +897,8 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
};
@@ -622,6 +924,8 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00300000 0x100000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 04/32] ARM: at91/dt: rm9200: define clocks
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91rm9200.dtsi | 304 ++++++++++++++++++++++++++++++++++++++
1 file changed, 304 insertions(+)
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index c61b16fba79b..65ccf564b9a5 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91RM9200 family SoC";
@@ -51,6 +52,20 @@
reg = <0x20000000 0x04000000>;
};
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -79,6 +94,260 @@
pmc: pmc at fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <3>;
+ atmel,pll-clk-output-ranges = <80000000 160000000 0>,
+ <150000000 180000000 2>;
+ };
+
+ pllb: pllbck {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+ clocks = <&main>;
+ reg = <1>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <3>;
+ atmel,pll-clk-output-ranges = <80000000 160000000 0>,
+ <150000000 180000000 2>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+ atmel,clk-output-range = <0 80000000>;
+ atmel,clk-divisors = <1 2 3 4>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ atmel,clk-divisors = <1 2>;
+ clocks = <&pllb>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+
+ prog2: prog2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ interrupts = <AT91_PMC_PCKRDY(2)>;
+ };
+
+ prog3: prog3 {
+ #clock-cells = <0>;
+ reg = <3>;
+ interrupts = <AT91_PMC_PCKRDY(3)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <2>;
+ clocks = <&usb>;
+ };
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <4>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ pck2: pck2 {
+ #clock-cells = <0>;
+ reg = <10>;
+ clocks = <&prog2>;
+ };
+
+ pck3: pck3 {
+ #clock-cells = <0>;
+ reg = <11>;
+ clocks = <&prog3>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ pioD_clk: pioD_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ udc_clk: udc_clk {
+ #clock-cells = <0>;
+ reg = <11>;
+ };
+
+ twi0_clk: twi0_clk {
+ reg = <12>;
+ #clock-cells = <0>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ ssc2_clk: ssc2_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
+ tc0_clk: tc0_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tc1_clk: tc1_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ tc2_clk: tc2_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ tc3_clk: tc3_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ tc4_clk: tc4_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ tc5_clk: tc5_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ ohci_clk: ohci_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+ };
};
st: timer at fffffd00 {
@@ -93,6 +362,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
tcb1: timer at fffa4000 {
@@ -101,6 +372,8 @@
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
21 IRQ_TYPE_LEVEL_HIGH 0
22 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
i2c0: i2c at fffb8000 {
@@ -109,6 +382,7 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_twi>;
+ clocks = <&twi0_clk>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -118,6 +392,8 @@
compatible = "atmel,hsmci";
reg = <0xfffb4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -130,6 +406,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disable";
};
@@ -139,6 +417,8 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
status = "disable";
};
@@ -148,6 +428,8 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+ clocks = <&ssc2_clk>;
+ clock-names = "pclk";
status = "disable";
};
@@ -158,6 +440,8 @@
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>;
+ clock-names = "ether_clk";
status = "disabled";
};
@@ -496,6 +780,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio at fffff600 {
@@ -506,6 +791,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio at fffff800 {
@@ -516,6 +802,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
};
pioD: gpio at fffffa00 {
@@ -526,6 +813,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioD_clk>;
};
};
@@ -535,6 +823,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -546,6 +836,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -557,6 +849,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -568,6 +862,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -579,6 +875,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -586,6 +884,8 @@
compatible = "atmel,at91rm9200-udc";
reg = <0xfffb0000 0x4000>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -597,6 +897,8 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
};
@@ -622,6 +924,8 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00300000 0x100000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 05/32] ARM: at91: move at91rm9200 SoC to the CCF
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91rm9200
SoC support. This will automatically enable COMMON_CLK_AT91 option and add
support for at91 common clk implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
---
arch/arm/mach-at91/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 45b55e0f0db6..c818136a74b8 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -113,7 +113,6 @@ config SOC_AT91RM9200
select HAVE_AT91_DBGU0
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
- select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
config SOC_AT91SAM9260
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 05/32] ARM: at91: move at91rm9200 SoC to the CCF
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91rm9200
SoC support. This will automatically enable COMMON_CLK_AT91 option and add
support for at91 common clk implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
---
arch/arm/mach-at91/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 45b55e0f0db6..c818136a74b8 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -113,7 +113,6 @@ config SOC_AT91RM9200
select HAVE_AT91_DBGU0
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
- select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
config SOC_AT91SAM9260
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 06/32] ARM: at91/dt: at91rm9200ek: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Define at91rm9200ek main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91rm9200ek.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index df6b0aa0e4dd..43eb779dd6f6 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -25,6 +25,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 06/32] ARM: at91/dt: at91rm9200ek: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define at91rm9200ek main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91rm9200ek.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index df6b0aa0e4dd..43eb779dd6f6 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -25,6 +25,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 07/32] ARM: at91: prepare common clk transition for sam9260
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Enclose the sam9260 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
#endif"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/at91sam9260.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index c3d22be73b7c..3477ba94c4c5 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -27,10 +27,11 @@
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -288,6 +289,9 @@ static void __init at91sam9260_register_clocks(void)
clk_register(&pck0);
clk_register(&pck1);
}
+#else
+#define at91sam9260_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 07/32] ARM: at91: prepare common clk transition for sam9260
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Enclose the sam9260 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
#endif"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/at91sam9260.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index c3d22be73b7c..3477ba94c4c5 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -27,10 +27,11 @@
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -288,6 +289,9 @@ static void __init at91sam9260_register_clocks(void)
clk_register(&pck0);
clk_register(&pck1);
}
+#else
+#define at91sam9260_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 08/32] ARM: at91/dt: sam9260: define clocks
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Define the at91sam9260 clocks in the SoC dtsi file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9260.dtsi | 314 ++++++++++++++++++++++++++++++++++++-
1 file changed, 313 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index c0e0eae16a27..cb100b03a362 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9260 family SoC";
@@ -48,6 +49,26 @@
reg = <0x20000000 0x04000000>;
};
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <5000000>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -74,8 +95,260 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91sam9260-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ slow_rc_osc: slow_rc_osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ };
+
+ clk32k: slck {
+ compatible = "atmel,at91sam9260-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc>, <&slow_xtal>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
+ <150000000 240000000 2 1>;
+ };
+
+ pllb: pllbck {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+ clocks = <&main>;
+ reg = <1>;
+ atmel,clk-input-range = <1000000 5000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+ atmel,clk-output-range = <0 105000000>;
+ atmel,clk-divisors = <1 2 4 0>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ atmel,clk-divisors = <1 2 4 0>;
+ clocks = <&pllb>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ adc_clk: adc_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ udc_clk: udc_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ twi0_clk: twi0_clk {
+ reg = <11>;
+ #clock-cells = <0>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ tc0_clk: tc0_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tc1_clk: tc1_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ tc2_clk: tc2_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ ohci_clk: ohci_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ isi_clk: isi_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ uart0_clk: uart0_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+
+ uart1_clk: uart1_clk {
+ #clock-cells = <0>;
+ reg = <25>;
+ };
+
+ tc3_clk: tc3_clk {
+ #clock-cells = <0>;
+ reg = <26>;
+ };
+
+ tc4_clk: tc4_clk {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+
+ tc5_clk: tc5_clk {
+ #clock-cells = <0>;
+ reg = <28>;
+ };
+ };
};
rstc@fffffd00 {
@@ -92,6 +365,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
};
tcb0: timer@fffa0000 {
@@ -100,6 +374,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
tcb1: timer@fffdc000 {
@@ -108,6 +384,8 @@
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
27 IRQ_TYPE_LEVEL_HIGH 0
28 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
pinctrl@fffff400 {
@@ -443,6 +721,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio@fffff600 {
@@ -453,6 +732,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio@fffff800 {
@@ -463,6 +743,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
};
};
@@ -472,6 +753,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -483,6 +766,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -494,6 +779,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -505,6 +792,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -516,6 +805,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -527,6 +818,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -538,6 +831,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&uart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -547,6 +842,8 @@
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -554,6 +851,8 @@
compatible = "atmel,at91rm9200-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -563,6 +862,7 @@
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi0_clk>;
status = "disabled";
};
@@ -573,6 +873,8 @@
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -582,6 +884,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -593,6 +897,8 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -604,6 +910,8 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -613,6 +921,8 @@
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&adc_clk>, <&adc_op_clk>;
+ clock-names = "adc_clk", "adc_op_clk";
atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xf>;
atmel,adc-vref = <3300>;
@@ -680,6 +990,8 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 08/32] ARM: at91/dt: sam9260: define clocks
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define the at91sam9260 clocks in the SoC dtsi file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9260.dtsi | 314 ++++++++++++++++++++++++++++++++++++-
1 file changed, 313 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index c0e0eae16a27..cb100b03a362 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9260 family SoC";
@@ -48,6 +49,26 @@
reg = <0x20000000 0x04000000>;
};
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <5000000>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -74,8 +95,260 @@
};
pmc: pmc at fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91sam9260-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ slow_rc_osc: slow_rc_osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ };
+
+ clk32k: slck {
+ compatible = "atmel,at91sam9260-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc>, <&slow_xtal>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
+ <150000000 240000000 2 1>;
+ };
+
+ pllb: pllbck {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+ clocks = <&main>;
+ reg = <1>;
+ atmel,clk-input-range = <1000000 5000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+ atmel,clk-output-range = <0 105000000>;
+ atmel,clk-divisors = <1 2 4 0>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ atmel,clk-divisors = <1 2 4 0>;
+ clocks = <&pllb>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ adc_clk: adc_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ udc_clk: udc_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ twi0_clk: twi0_clk {
+ reg = <11>;
+ #clock-cells = <0>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ tc0_clk: tc0_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tc1_clk: tc1_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ tc2_clk: tc2_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ ohci_clk: ohci_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ isi_clk: isi_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ uart0_clk: uart0_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+
+ uart1_clk: uart1_clk {
+ #clock-cells = <0>;
+ reg = <25>;
+ };
+
+ tc3_clk: tc3_clk {
+ #clock-cells = <0>;
+ reg = <26>;
+ };
+
+ tc4_clk: tc4_clk {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+
+ tc5_clk: tc5_clk {
+ #clock-cells = <0>;
+ reg = <28>;
+ };
+ };
};
rstc at fffffd00 {
@@ -92,6 +365,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
};
tcb0: timer at fffa0000 {
@@ -100,6 +374,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
tcb1: timer at fffdc000 {
@@ -108,6 +384,8 @@
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
27 IRQ_TYPE_LEVEL_HIGH 0
28 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
pinctrl at fffff400 {
@@ -443,6 +721,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio at fffff600 {
@@ -453,6 +732,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio at fffff800 {
@@ -463,6 +743,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
};
};
@@ -472,6 +753,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -483,6 +766,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -494,6 +779,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -505,6 +792,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -516,6 +805,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -527,6 +818,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -538,6 +831,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&uart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -547,6 +842,8 @@
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -554,6 +851,8 @@
compatible = "atmel,at91rm9200-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -563,6 +862,7 @@
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi0_clk>;
status = "disabled";
};
@@ -573,6 +873,8 @@
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -582,6 +884,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -593,6 +897,8 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -604,6 +910,8 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -613,6 +921,8 @@
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&adc_clk>, <&adc_op_clk>;
+ clock-names = "adc_clk", "adc_op_clk";
atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xf>;
atmel,adc-vref = <3300>;
@@ -680,6 +990,8 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 09/32] ARM: at91/dt: sam9g20: define clocks
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Define the at91sam9g20 clocks that differ from at91sam9260 in the SoC dtsi file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9g20.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index b8e79466014f..31f7652612fc 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -25,6 +25,30 @@
adc0: adc@fffe0000 {
atmel,adc-startup-time = <40>;
};
+
+ pmc: pmc@fffffc00 {
+ plla: pllack {
+ atmel,clk-input-range = <2000000 32000000>;
+ atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
+ <695000000 750000000 1 0>,
+ <645000000 700000000 2 0>,
+ <595000000 650000000 3 0>,
+ <545000000 600000000 0 1>,
+ <495000000 550000000 1 1>,
+ <445000000 500000000 2 1>,
+ <400000000 450000000 3 1>;
+ };
+
+ pllb: pllbck {
+ atmel,clk-input-range = <2000000 32000000>;
+ atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
+ };
+
+ mck: masterck {
+ atmel,clk-output-range = <0 133000000>;
+ atmel,clk-divisors = <1 2 4 6>;
+ };
+ };
};
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 09/32] ARM: at91/dt: sam9g20: define clocks
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define the at91sam9g20 clocks that differ from at91sam9260 in the SoC dtsi file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9g20.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index b8e79466014f..31f7652612fc 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -25,6 +25,30 @@
adc0: adc at fffe0000 {
atmel,adc-startup-time = <40>;
};
+
+ pmc: pmc at fffffc00 {
+ plla: pllack {
+ atmel,clk-input-range = <2000000 32000000>;
+ atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
+ <695000000 750000000 1 0>,
+ <645000000 700000000 2 0>,
+ <595000000 650000000 3 0>,
+ <545000000 600000000 0 1>,
+ <495000000 550000000 1 1>,
+ <445000000 500000000 2 1>,
+ <400000000 450000000 3 1>;
+ };
+
+ pllb: pllbck {
+ atmel,clk-input-range = <2000000 32000000>;
+ atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
+ };
+
+ mck: masterck {
+ atmel,clk-output-range = <0 133000000>;
+ atmel,clk-divisors = <1 2 4 6>;
+ };
+ };
};
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 10/32] ARM: at91: move at91sam9260 SoCs to the CCF
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91sam9260
SoCs support. This will automatically enable COMMON_CLK_AT91 option and add
support for at91 common clk implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index c818136a74b8..a2efe6e1e224 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -119,7 +119,6 @@ config SOC_AT91SAM9260
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
select HAVE_AT91_DBGU0
select SOC_AT91SAM9
- select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 10/32] ARM: at91: move at91sam9260 SoCs to the CCF
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91sam9260
SoCs support. This will automatically enable COMMON_CLK_AT91 option and add
support for at91 common clk implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index c818136a74b8..a2efe6e1e224 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -119,7 +119,6 @@ config SOC_AT91SAM9260
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
select HAVE_AT91_DBGU0
select SOC_AT91SAM9
- select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 11/32] ARM: at91/dt: at91sam9g20ek: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Define at91sam9g20ek main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index cb2c010e08e2..d2919108e92d 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -26,6 +26,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 11/32] ARM: at91/dt: at91sam9g20ek: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define at91sam9g20ek main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index cb2c010e08e2..d2919108e92d 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -26,6 +26,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 12/32] ARM: at91/dt: foxg20: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni,
Douglas Gilbert
Define Acme Systems srl Fox G20 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
---
arch/arm/boot/dts/at91-foxg20.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index cbe967343997..f89598af4c2b 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -31,6 +31,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 12/32] ARM: at91/dt: foxg20: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define Acme Systems srl Fox G20 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
---
arch/arm/boot/dts/at91-foxg20.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index cbe967343997..f89598af4c2b 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -31,6 +31,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 13/32] ARM: at91/dt: usb_a9260: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni,
Gregory Hermant
Define Calao USB-A9260, USB-A9G20 and USB-A9G20-LPW main and slow crystals
frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
---
arch/arm/boot/dts/usb_a9260_common.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
index 285977682cf3..12edafefd44a 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -16,6 +16,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 13/32] ARM: at91/dt: usb_a9260: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define Calao USB-A9260, USB-A9G20 and USB-A9G20-LPW main and slow crystals
frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
---
arch/arm/boot/dts/usb_a9260_common.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
index 285977682cf3..12edafefd44a 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -16,6 +16,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 14/32] ARM: at91/dt: tny_a9260: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni,
Gregory Hermant
Define Calao TNY-A9260 and TNY-A9G20 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
---
arch/arm/boot/dts/tny_a9260_common.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi
index 0e6d3de2e09e..ce7138c3af1b 100644
--- a/arch/arm/boot/dts/tny_a9260_common.dtsi
+++ b/arch/arm/boot/dts/tny_a9260_common.dtsi
@@ -24,6 +24,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 14/32] ARM: at91/dt: tny_a9260: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define Calao TNY-A9260 and TNY-A9G20 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
---
arch/arm/boot/dts/tny_a9260_common.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi
index 0e6d3de2e09e..ce7138c3af1b 100644
--- a/arch/arm/boot/dts/tny_a9260_common.dtsi
+++ b/arch/arm/boot/dts/tny_a9260_common.dtsi
@@ -24,6 +24,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 15/32] ARM: at91/dt: qil_a9260: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni,
Gregory Hermant
Define Calao QIL-A9260 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
---
arch/arm/boot/dts/at91-qil_a9260.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index 5576ae8786c0..a9aef53ab764 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -28,6 +28,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 15/32] ARM: at91/dt: qil_a9260: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define Calao QIL-A9260 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
---
arch/arm/boot/dts/at91-qil_a9260.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index 5576ae8786c0..a9aef53ab764 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -28,6 +28,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 16/32] ARM: at91/dt: mpa1600: define crytals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni,
Joachim Eastwood
Define Phontech MPA 1600 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Joachim Eastwood <manabian@gmail.com>
---
arch/arm/boot/dts/mpa1600.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
index ccf9ea242f72..f0f5e1098928 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/mpa1600.dts
@@ -25,6 +25,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 16/32] ARM: at91/dt: mpa1600: define crytals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define Phontech MPA 1600 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Joachim Eastwood <manabian@gmail.com>
---
arch/arm/boot/dts/mpa1600.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
index ccf9ea242f72..f0f5e1098928 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/mpa1600.dts
@@ -25,6 +25,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 17/32] ARM: at91/dt: ge863-pro3: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni,
Fabio Porcedda, Jiri Prchal
Define Telit GE863-PRO3, AK signal CDU and Telit EVK-PRO3 main and slow
crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
---
arch/arm/boot/dts/ge863-pro3.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
index 230099bb31c8..a32fdbefbbd9 100644
--- a/arch/arm/boot/dts/ge863-pro3.dtsi
+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
@@ -19,6 +19,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <6000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <6000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 17/32] ARM: at91/dt: ge863-pro3: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define Telit GE863-PRO3, AK signal CDU and Telit EVK-PRO3 main and slow
crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
---
arch/arm/boot/dts/ge863-pro3.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
index 230099bb31c8..a32fdbefbbd9 100644
--- a/arch/arm/boot/dts/ge863-pro3.dtsi
+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
@@ -19,6 +19,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <6000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <6000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 18/32] ARM: at91/dt: ethernut5: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni,
Tim Schendekehl
Define egnite Ethernut 5 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Tim Schendekehl <tim.schendekehl@egnite.de>
---
arch/arm/boot/dts/ethernut5.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
index 143b6d25bc80..8f941c2db7c6 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -20,6 +20,16 @@
reg = <0x20000000 0x08000000>;
};
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
ahb {
apb {
dbgu: serial@fffff200 {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 18/32] ARM: at91/dt: ethernut5: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define egnite Ethernut 5 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Tim Schendekehl <tim.schendekehl@egnite.de>
---
arch/arm/boot/dts/ethernut5.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
index 143b6d25bc80..8f941c2db7c6 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -20,6 +20,16 @@
reg = <0x20000000 0x08000000>;
};
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
ahb {
apb {
dbgu: serial at fffff200 {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 19/32] ARM: at91/dt: animeo_ip: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Define Somfy Animeo IP main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/animeo_ip.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 3c4f6d983cbd..4e0ad3b82796 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -40,6 +40,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 19/32] ARM: at91/dt: animeo_ip: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define Somfy Animeo IP main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/animeo_ip.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 3c4f6d983cbd..4e0ad3b82796 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -40,6 +40,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 20/32] ARM: at91/dt: kizbox: define main crystal frequency
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni, Gael Portay
Define kizbox board's main crystal frequency.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Gael Portay <g.portay@overkiz.com>
---
arch/arm/boot/dts/kizbox.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
index 928f6eef2d59..e83e4f9310b8 100644
--- a/arch/arm/boot/dts/kizbox.dts
+++ b/arch/arm/boot/dts/kizbox.dts
@@ -30,6 +30,10 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 20/32] ARM: at91/dt: kizbox: define main crystal frequency
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define kizbox board's main crystal frequency.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Gael Portay <g.portay@overkiz.com>
---
arch/arm/boot/dts/kizbox.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
index 928f6eef2d59..e83e4f9310b8 100644
--- a/arch/arm/boot/dts/kizbox.dts
+++ b/arch/arm/boot/dts/kizbox.dts
@@ -30,6 +30,10 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 21/32] ARM: at91: prepare common clk transition for sam9g45
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Enclose the sam9g45 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
#endif"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/at91sam9g45.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 9d3d544ac19c..0d5d85797cd6 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -25,10 +25,11 @@
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -331,6 +332,9 @@ static void __init at91sam9g45_register_clocks(void)
clk_register(&pck0);
clk_register(&pck1);
}
+#else
+#define at91sam9g45_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 21/32] ARM: at91: prepare common clk transition for sam9g45
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Enclose the sam9g45 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
#endif"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/at91sam9g45.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 9d3d544ac19c..0d5d85797cd6 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -25,10 +25,11 @@
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -331,6 +332,9 @@ static void __init at91sam9g45_register_clocks(void)
clk_register(&pck0);
clk_register(&pck1);
}
+#else
+#define at91sam9g45_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 22/32] ARM: at91/dt: sam9g45: define clocks
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Define the at91sam9g45 clocks in the SoC dtsi file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9g45.dtsi | 340 ++++++++++++++++++++++++++++++++++++-
1 file changed, 339 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index ace6bf197b70..c76a60a2e239 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9G45 family SoC";
@@ -53,6 +54,26 @@
reg = <0x70000000 0x10000000>;
};
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <300000>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -80,8 +101,274 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91sam9g45-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <2000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <745000000 800000000 0 0
+ 695000000 750000000 1 0
+ 645000000 700000000 2 0
+ 595000000 650000000 3 0
+ 545000000 600000000 0 1
+ 495000000 555000000 1 1
+ 445000000 500000000 2 1
+ 400000000 450000000 3 1>;
+ };
+
+ plladiv: plladivck {
+ compatible = "atmel,at91sam9x5-clk-plldiv";
+ #clock-cells = <0>;
+ clocks = <&plla>;
+ };
+
+ utmi: utmick {
+ compatible = "atmel,at91sam9x5-clk-utmi";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKU>;
+ clocks = <&main>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>;
+ atmel,clk-output-range = <0 133333333>;
+ atmel,clk-divisors = <1 2 4 3>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91sam9x5-clk-usb";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91sam9g45-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ddrck: ddrck {
+ #clock-cells = <0>;
+ reg = <2>;
+ clocks = <&mck>;
+ };
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ pioDE_clk: pioDE_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ trng_clk: trng_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <11>;
+ };
+
+ twi0_clk: twi0_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ twi1_clk: twi1_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tcb0_clk: tcb0_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ pwm_clk: pwm_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ adc_clk: adc_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ dma0_clk: dma0_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ uhphs_clk: uhphs_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ lcd_clk: lcd_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ ac97_clk: ac97_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <25>;
+ };
+
+ isi_clk: isi_clk {
+ #clock-cells = <0>;
+ reg = <26>;
+ };
+
+ udphs_clk: udphs_clk {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+
+ aestdessha_clk: aestdessha_clk {
+ #clock-cells = <0>;
+ reg = <28>;
+ };
+
+ mci1_clk: mci1_clk {
+ #clock-cells = <0>;
+ reg = <29>;
+ };
+
+ vdec_clk: vdec_clk {
+ #clock-cells = <0>;
+ reg = <30>;
+ };
+ };
};
rstc@fffffd00 {
@@ -93,6 +380,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
};
@@ -105,12 +393,16 @@
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
tcb1: timer@fffd4000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffd4000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
dma: dma-controller@ffffec00 {
@@ -118,6 +410,8 @@
reg = <0xffffec00 0x200>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
+ clocks = <&dma0_clk>;
+ clock-names = "dma_clk";
};
pinctrl@fffff200 {
@@ -516,6 +810,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio@fffff400 {
@@ -526,6 +821,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio@fffff600 {
@@ -536,6 +832,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
};
pioD: gpio@fffff800 {
@@ -546,6 +843,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioDE_clk>;
};
pioE: gpio@fffffa00 {
@@ -556,6 +854,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioDE_clk>;
};
};
@@ -565,6 +864,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -576,6 +877,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -587,6 +890,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -598,6 +903,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -609,6 +916,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -618,6 +927,8 @@
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -629,6 +940,7 @@
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi0_clk>;
status = "disabled";
};
@@ -640,6 +952,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi1_clk>;
status = "disabled";
};
@@ -649,6 +962,8 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -658,6 +973,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -667,6 +984,8 @@
compatible = "atmel,at91sam9g45-adc";
reg = <0xfffb0000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&adc_clk>, <&adc_op_clk>;
+ clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
@@ -706,6 +1025,7 @@
reg = <0xfffb8000 0x300>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
+ clocks = <&pwm_clk>;
status = "disabled";
};
@@ -718,6 +1038,8 @@
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -730,6 +1052,8 @@
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci1_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -752,6 +1076,8 @@
interrupts = <14 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -763,6 +1089,8 @@
interrupts = <15 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -773,6 +1101,8 @@
reg = <0x00600000 0x80000
0xfff78000 0x400>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&udphs_clk>, <&utmi>;
+ clock-names = "pclk", "hclk";
status = "disabled";
ep0 {
@@ -835,6 +1165,8 @@
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
+ clocks = <&lcd_clk>, <&lcd_clk>;
+ clock-names = "hclk", "lcdc_clk";
status = "disabled";
};
@@ -861,6 +1193,9 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ //TODO
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -868,6 +1203,9 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ //TODO
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
status = "disabled";
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 22/32] ARM: at91/dt: sam9g45: define clocks
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define the at91sam9g45 clocks in the SoC dtsi file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9g45.dtsi | 340 ++++++++++++++++++++++++++++++++++++-
1 file changed, 339 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index ace6bf197b70..c76a60a2e239 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9G45 family SoC";
@@ -53,6 +54,26 @@
reg = <0x70000000 0x10000000>;
};
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <300000>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -80,8 +101,274 @@
};
pmc: pmc at fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91sam9g45-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <2000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <745000000 800000000 0 0
+ 695000000 750000000 1 0
+ 645000000 700000000 2 0
+ 595000000 650000000 3 0
+ 545000000 600000000 0 1
+ 495000000 555000000 1 1
+ 445000000 500000000 2 1
+ 400000000 450000000 3 1>;
+ };
+
+ plladiv: plladivck {
+ compatible = "atmel,at91sam9x5-clk-plldiv";
+ #clock-cells = <0>;
+ clocks = <&plla>;
+ };
+
+ utmi: utmick {
+ compatible = "atmel,at91sam9x5-clk-utmi";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKU>;
+ clocks = <&main>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>;
+ atmel,clk-output-range = <0 133333333>;
+ atmel,clk-divisors = <1 2 4 3>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91sam9x5-clk-usb";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91sam9g45-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ddrck: ddrck {
+ #clock-cells = <0>;
+ reg = <2>;
+ clocks = <&mck>;
+ };
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ pioDE_clk: pioDE_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ trng_clk: trng_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <11>;
+ };
+
+ twi0_clk: twi0_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ twi1_clk: twi1_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tcb0_clk: tcb0_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ pwm_clk: pwm_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ adc_clk: adc_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ dma0_clk: dma0_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ uhphs_clk: uhphs_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ lcd_clk: lcd_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ ac97_clk: ac97_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <25>;
+ };
+
+ isi_clk: isi_clk {
+ #clock-cells = <0>;
+ reg = <26>;
+ };
+
+ udphs_clk: udphs_clk {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+
+ aestdessha_clk: aestdessha_clk {
+ #clock-cells = <0>;
+ reg = <28>;
+ };
+
+ mci1_clk: mci1_clk {
+ #clock-cells = <0>;
+ reg = <29>;
+ };
+
+ vdec_clk: vdec_clk {
+ #clock-cells = <0>;
+ reg = <30>;
+ };
+ };
};
rstc at fffffd00 {
@@ -93,6 +380,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
};
@@ -105,12 +393,16 @@
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
tcb1: timer at fffd4000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffd4000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
dma: dma-controller at ffffec00 {
@@ -118,6 +410,8 @@
reg = <0xffffec00 0x200>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
+ clocks = <&dma0_clk>;
+ clock-names = "dma_clk";
};
pinctrl at fffff200 {
@@ -516,6 +810,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio at fffff400 {
@@ -526,6 +821,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio at fffff600 {
@@ -536,6 +832,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
};
pioD: gpio at fffff800 {
@@ -546,6 +843,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioDE_clk>;
};
pioE: gpio at fffffa00 {
@@ -556,6 +854,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioDE_clk>;
};
};
@@ -565,6 +864,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -576,6 +877,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -587,6 +890,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -598,6 +903,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -609,6 +916,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -618,6 +927,8 @@
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -629,6 +940,7 @@
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi0_clk>;
status = "disabled";
};
@@ -640,6 +952,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi1_clk>;
status = "disabled";
};
@@ -649,6 +962,8 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -658,6 +973,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -667,6 +984,8 @@
compatible = "atmel,at91sam9g45-adc";
reg = <0xfffb0000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&adc_clk>, <&adc_op_clk>;
+ clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
@@ -706,6 +1025,7 @@
reg = <0xfffb8000 0x300>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
+ clocks = <&pwm_clk>;
status = "disabled";
};
@@ -718,6 +1038,8 @@
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -730,6 +1052,8 @@
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci1_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -752,6 +1076,8 @@
interrupts = <14 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -763,6 +1089,8 @@
interrupts = <15 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -773,6 +1101,8 @@
reg = <0x00600000 0x80000
0xfff78000 0x400>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&udphs_clk>, <&utmi>;
+ clock-names = "pclk", "hclk";
status = "disabled";
ep0 {
@@ -835,6 +1165,8 @@
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
+ clocks = <&lcd_clk>, <&lcd_clk>;
+ clock-names = "hclk", "lcdc_clk";
status = "disabled";
};
@@ -861,6 +1193,9 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ //TODO
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -868,6 +1203,9 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ //TODO
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
status = "disabled";
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 23/32] ARM: at91: move at91sam9g45 SoC to the CCF
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91sam9g45
SoC support. This will automatically enable COMMON_CLK_AT91 option and add
support for at91 common clock implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a2efe6e1e224..461966d0ee4d 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -153,7 +153,6 @@ config SOC_AT91SAM9G45
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select SOC_AT91SAM9
- select AT91_USE_OLD_CLK
select HAVE_AT91_UTMI
select HAVE_AT91_USB_CLK
help
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 23/32] ARM: at91: move at91sam9g45 SoC to the CCF
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
This patch removes the selection of AT91_USE_OLD_CLK when selecting at91sam9g45
SoC support. This will automatically enable COMMON_CLK_AT91 option and add
support for at91 common clock implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a2efe6e1e224..461966d0ee4d 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -153,7 +153,6 @@ config SOC_AT91SAM9G45
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select SOC_AT91SAM9
- select AT91_USE_OLD_CLK
select HAVE_AT91_UTMI
select HAVE_AT91_USB_CLK
help
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 24/32] ARM: at91/dt: sam9m10g45ek: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Define at91sam9m10g45ek main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9m10g45ek.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 9f5b0a674995..96ccc7de4f0a 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -31,6 +31,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 24/32] ARM: at91/dt: sam9m10g45ek: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define at91sam9m10g45ek main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9m10g45ek.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 9f5b0a674995..96ccc7de4f0a 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -31,6 +31,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 25/32] ARM: at91/dt: pm9g45: crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Define Ronetix pm9g45 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/pm9g45.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
index 33ffabe9c4c8..66afcff67fde 100644
--- a/arch/arm/boot/dts/pm9g45.dts
+++ b/arch/arm/boot/dts/pm9g45.dts
@@ -29,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 25/32] ARM: at91/dt: pm9g45: crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define Ronetix pm9g45 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/pm9g45.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
index 33ffabe9c4c8..66afcff67fde 100644
--- a/arch/arm/boot/dts/pm9g45.dts
+++ b/arch/arm/boot/dts/pm9g45.dts
@@ -29,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 26/32] ARM: at91/dt: cosino define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni,
Rodolfo Giometti
Define Cosino boards main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Rodolfo Giometti <giometti@linux.it>
---
arch/arm/boot/dts/at91-cosino.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
index df4b78695695..b6ea3f4a7206 100644
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -34,6 +34,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 26/32] ARM: at91/dt: cosino define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define Cosino boards main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Rodolfo Giometti <giometti@linux.it>
---
arch/arm/boot/dts/at91-cosino.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
index df4b78695695..b6ea3f4a7206 100644
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -34,6 +34,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 27/32] ARM: at91: prepare common clk transition for sam9263
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Enclose the sam9263 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
#endif"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/at91sam9263.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index f30290572293..c07465361947 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -25,10 +25,11 @@
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -280,6 +281,9 @@ static void __init at91sam9263_register_clocks(void)
clk_register(&pck2);
clk_register(&pck3);
}
+#else
+#define at91sam9263_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 27/32] ARM: at91: prepare common clk transition for sam9263
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Enclose the sam9263 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
#endif"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/at91sam9263.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index f30290572293..c07465361947 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -25,10 +25,11 @@
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -280,6 +281,9 @@ static void __init at91sam9263_register_clocks(void)
clk_register(&pck2);
clk_register(&pck3);
}
+#else
+#define at91sam9263_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 28/32] ARM: at91/dt: sam9263: define clocks
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Define the at91sam9263 clocks in the SoC dtsi file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9263.dtsi | 311 +++++++++++++++++++++++++++++++++++++
1 file changed, 311 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index fece8665fb63..bb23c2d33cf8 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9263 family SoC";
@@ -32,6 +33,7 @@
ssc1 = &ssc1;
pwm0 = &pwm0;
};
+
cpus {
#address-cells = <0>;
#size-cells = <0>;
@@ -46,6 +48,20 @@
reg = <0x20000000 0x08000000>;
};
+ clocks {
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -69,6 +85,264 @@
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+ <190000000 240000000 2 1>;
+ };
+
+ pllb: pllbck {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+ clocks = <&main>;
+ reg = <1>;
+ atmel,clk-input-range = <1000000 5000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+ atmel,clk-output-range = <0 120000000>;
+ atmel,clk-divisors = <1 2 4 0>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ atmel,clk-divisors = <1 2 4 0>;
+ clocks = <&pllb>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+
+ prog2: prog2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ interrupts = <AT91_PMC_PCKRDY(2)>;
+ };
+
+ prog3: prog3 {
+ #clock-cells = <0>;
+ reg = <3>;
+ interrupts = <AT91_PMC_PCKRDY(3)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ pck2: pck2 {
+ #clock-cells = <0>;
+ reg = <10>;
+ clocks = <&prog2>;
+ };
+
+ pck3: pck3 {
+ #clock-cells = <0>;
+ reg = <11>;
+ clocks = <&prog3>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioCDE_clk: pioCDE_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ mci1_clk: mci1_clk {
+ #clock-cells = <0>;
+ reg = <11>;
+ };
+
+ can_clk: can_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ twi0_clk: twi0_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ ac91_clk: ac97_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ tcb_clk: tcb_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ pwm_clk: pwm_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ g2de_clk: g2de_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ udc_clk: udc_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+
+ isi_clk: isi_clk {
+ #clock-cells = <0>;
+ reg = <25>;
+ };
+
+ lcd_clk: lcd_clk {
+ #clock-cells = <0>;
+ reg = <26>;
+ };
+
+ dma_clk: dma_clk {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+
+ ohci_clk: ohci_clk {
+ #clock-cells = <0>;
+ reg = <29>;
+ };
+ };
};
ramc: ramc@ffffe200 {
@@ -81,12 +355,15 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
};
tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb_clk>;
+ clock-names = "t0_clk";
};
rstc@fffffd00 {
@@ -403,6 +680,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio@fffff400 {
@@ -413,6 +691,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio@fffff600 {
@@ -423,6 +702,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioCDE_clk>;
};
pioD: gpio@fffff800 {
@@ -433,6 +713,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioCDE_clk>;
};
pioE: gpio@fffffa00 {
@@ -443,6 +724,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioCDE_clk>;
};
};
@@ -452,6 +734,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -463,6 +747,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -474,6 +760,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -485,6 +773,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -494,6 +784,8 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -503,6 +795,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -512,6 +806,8 @@
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -519,6 +815,8 @@
compatible = "atmel,at91rm9200-udc";
reg = <0xfff78000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -528,6 +826,7 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi0_clk>;
status = "disabled";
};
@@ -537,6 +836,8 @@
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -546,6 +847,8 @@
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci1_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -568,6 +871,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -579,6 +884,8 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -587,6 +894,8 @@
reg = <0xfffb8000 0x300>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
+ clocks = <&pwm_clk>;
+ clock-names = "pwm_clk";
status = "disabled";
};
};
@@ -622,6 +931,8 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00a00000 0x100000>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 28/32] ARM: at91/dt: sam9263: define clocks
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define the at91sam9263 clocks in the SoC dtsi file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9263.dtsi | 311 +++++++++++++++++++++++++++++++++++++
1 file changed, 311 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index fece8665fb63..bb23c2d33cf8 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9263 family SoC";
@@ -32,6 +33,7 @@
ssc1 = &ssc1;
pwm0 = &pwm0;
};
+
cpus {
#address-cells = <0>;
#size-cells = <0>;
@@ -46,6 +48,20 @@
reg = <0x20000000 0x08000000>;
};
+ clocks {
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -69,6 +85,264 @@
pmc: pmc at fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+ <190000000 240000000 2 1>;
+ };
+
+ pllb: pllbck {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+ clocks = <&main>;
+ reg = <1>;
+ atmel,clk-input-range = <1000000 5000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+ atmel,clk-output-range = <0 120000000>;
+ atmel,clk-divisors = <1 2 4 0>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ atmel,clk-divisors = <1 2 4 0>;
+ clocks = <&pllb>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+
+ prog2: prog2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ interrupts = <AT91_PMC_PCKRDY(2)>;
+ };
+
+ prog3: prog3 {
+ #clock-cells = <0>;
+ reg = <3>;
+ interrupts = <AT91_PMC_PCKRDY(3)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ pck2: pck2 {
+ #clock-cells = <0>;
+ reg = <10>;
+ clocks = <&prog2>;
+ };
+
+ pck3: pck3 {
+ #clock-cells = <0>;
+ reg = <11>;
+ clocks = <&prog3>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioCDE_clk: pioCDE_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ mci1_clk: mci1_clk {
+ #clock-cells = <0>;
+ reg = <11>;
+ };
+
+ can_clk: can_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ twi0_clk: twi0_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ ac91_clk: ac97_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ tcb_clk: tcb_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ pwm_clk: pwm_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ g2de_clk: g2de_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ udc_clk: udc_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+
+ isi_clk: isi_clk {
+ #clock-cells = <0>;
+ reg = <25>;
+ };
+
+ lcd_clk: lcd_clk {
+ #clock-cells = <0>;
+ reg = <26>;
+ };
+
+ dma_clk: dma_clk {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+
+ ohci_clk: ohci_clk {
+ #clock-cells = <0>;
+ reg = <29>;
+ };
+ };
};
ramc: ramc at ffffe200 {
@@ -81,12 +355,15 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
};
tcb0: timer at fff7c000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb_clk>;
+ clock-names = "t0_clk";
};
rstc at fffffd00 {
@@ -403,6 +680,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio at fffff400 {
@@ -413,6 +691,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio at fffff600 {
@@ -423,6 +702,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioCDE_clk>;
};
pioD: gpio at fffff800 {
@@ -433,6 +713,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioCDE_clk>;
};
pioE: gpio at fffffa00 {
@@ -443,6 +724,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioCDE_clk>;
};
};
@@ -452,6 +734,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -463,6 +747,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -474,6 +760,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -485,6 +773,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -494,6 +784,8 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -503,6 +795,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -512,6 +806,8 @@
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -519,6 +815,8 @@
compatible = "atmel,at91rm9200-udc";
reg = <0xfff78000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -528,6 +826,7 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi0_clk>;
status = "disabled";
};
@@ -537,6 +836,8 @@
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -546,6 +847,8 @@
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci1_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -568,6 +871,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -579,6 +884,8 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -587,6 +894,8 @@
reg = <0xfffb8000 0x300>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
+ clocks = <&pwm_clk>;
+ clock-names = "pwm_clk";
status = "disabled";
};
};
@@ -622,6 +931,8 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00a00000 0x100000>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 29/32] ARM: at91: move at91sam9263 SoC to the CCF
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
This patch removes the selection of AT91_USE_OLD_CLK when selecting
at91sam9263 SoC support. This will automatically enable COMMON_CLK_AT91
option and add support for at91 common clock implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 461966d0ee4d..6cc6f7aebdae 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -138,7 +138,6 @@ config SOC_AT91SAM9263
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select SOC_AT91SAM9
- select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
config SOC_AT91SAM9RL
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 29/32] ARM: at91: move at91sam9263 SoC to the CCF
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
This patch removes the selection of AT91_USE_OLD_CLK when selecting
at91sam9263 SoC support. This will automatically enable COMMON_CLK_AT91
option and add support for at91 common clock implementation.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 461966d0ee4d..6cc6f7aebdae 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -138,7 +138,6 @@ config SOC_AT91SAM9263
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select SOC_AT91SAM9
- select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
config SOC_AT91SAM9RL
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 30/32] ARM: at91/dt: sam9263ek: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni
Define at91sam9263ek main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9263ek.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 15009c9f2293..5cf93eecd8f1 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -29,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <16367660>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <16367660>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 30/32] ARM: at91/dt: sam9263ek: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define at91sam9263ek main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9263ek.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 15009c9f2293..5cf93eecd8f1 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -29,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <16367660>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <16367660>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 31/32] ARM: at91/dt: tny_a9263: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni,
Gregory Hermant
Define Calao TNY-A9263 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
---
arch/arm/boot/dts/tny_a9263.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
index 0751a6a979a8..3043296345b7 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -29,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 31/32] ARM: at91/dt: tny_a9263: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define Calao TNY-A9263 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
---
arch/arm/boot/dts/tny_a9263.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
index 0751a6a979a8..3043296345b7 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -29,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 32/32] ARM: at91/dt: usb_a9263: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-07 20:23 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Alexandre Belloni,
Gregory Hermant
Define Calao USB-A9263 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
---
arch/arm/boot/dts/usb_a9263.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 290e60383baf..68c0de36c339 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -29,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCHv2 32/32] ARM: at91/dt: usb_a9263: define crystals frequencies
@ 2014-07-07 20:23 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define Calao USB-A9263 main and slow crystals frequencies.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
---
arch/arm/boot/dts/usb_a9263.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 290e60383baf..68c0de36c339 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -29,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* Re: [PATCHv2 17/32] ARM: at91/dt: ge863-pro3: define crystals frequencies
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-08 6:11 ` Jiří Prchal
-1 siblings, 0 replies; 72+ messages in thread
From: Jiří Prchal @ 2014-07-08 6:11 UTC (permalink / raw)
To: Alexandre Belloni, Nicolas Ferre
Cc: Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Fabio Porcedda
Hi,
the slow crystal is not on the module "ge863-pro3", but it's usually on application board. So I think this clock should
be in board dts.
Dne 7.7.2014 22:23, Alexandre Belloni napsal(a):
> Define Telit GE863-PRO3, AK signal CDU and Telit EVK-PRO3 main and slow
> crystals frequencies.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
> Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
> ---
> arch/arm/boot/dts/ge863-pro3.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
> index 230099bb31c8..a32fdbefbbd9 100644
> --- a/arch/arm/boot/dts/ge863-pro3.dtsi
> +++ b/arch/arm/boot/dts/ge863-pro3.dtsi
> @@ -19,6 +19,14 @@
> compatible = "atmel,osc", "fixed-clock";
> clock-frequency = <6000000>;
> };
> +
> + slow_xtal {
> + clock-frequency = <32768>;
> + };
> +
> + main_xtal {
> + clock-frequency = <6000000>;
> + };
> };
>
> ahb {
>
^ permalink raw reply [flat|nested] 72+ messages in thread
* [PATCHv2 17/32] ARM: at91/dt: ge863-pro3: define crystals frequencies
@ 2014-07-08 6:11 ` Jiří Prchal
0 siblings, 0 replies; 72+ messages in thread
From: Jiří Prchal @ 2014-07-08 6:11 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
the slow crystal is not on the module "ge863-pro3", but it's usually on application board. So I think this clock should
be in board dts.
Dne 7.7.2014 22:23, Alexandre Belloni napsal(a):
> Define Telit GE863-PRO3, AK signal CDU and Telit EVK-PRO3 main and slow
> crystals frequencies.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
> Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
> ---
> arch/arm/boot/dts/ge863-pro3.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
> index 230099bb31c8..a32fdbefbbd9 100644
> --- a/arch/arm/boot/dts/ge863-pro3.dtsi
> +++ b/arch/arm/boot/dts/ge863-pro3.dtsi
> @@ -19,6 +19,14 @@
> compatible = "atmel,osc", "fixed-clock";
> clock-frequency = <6000000>;
> };
> +
> + slow_xtal {
> + clock-frequency = <32768>;
> + };
> +
> + main_xtal {
> + clock-frequency = <6000000>;
> + };
> };
>
> ahb {
>
^ permalink raw reply [flat|nested] 72+ messages in thread
* Re: [PATCHv2 17/32] ARM: at91/dt: ge863-pro3: define crystals frequencies
2014-07-08 6:11 ` Jiří Prchal
@ 2014-07-08 11:31 ` Alexandre Belloni
-1 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-08 11:31 UTC (permalink / raw)
To: Jiří Prchal
Cc: Nicolas Ferre, Jean-Christophe Plagniol-Villard, Boris Brezillon,
linux-arm-kernel, linux-kernel, Fabio Porcedda
On 08/07/2014 at 08:11:29 +0200, Jiří Prchal wrote :
> Hi,
> the slow crystal is not on the module "ge863-pro3", but it's usually
> on application board. So I think this clock should be in board dts.
>
Right, I'll move the 32kHz crystal to the board dts.
> Dne 7.7.2014 22:23, Alexandre Belloni napsal(a):
> >Define Telit GE863-PRO3, AK signal CDU and Telit EVK-PRO3 main and slow
> >crystals frequencies.
> >
> >Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> >Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
> >Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
> >---
> > arch/arm/boot/dts/ge863-pro3.dtsi | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> >diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
> >index 230099bb31c8..a32fdbefbbd9 100644
> >--- a/arch/arm/boot/dts/ge863-pro3.dtsi
> >+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
> >@@ -19,6 +19,14 @@
> > compatible = "atmel,osc", "fixed-clock";
> > clock-frequency = <6000000>;
> > };
> >+
> >+ slow_xtal {
> >+ clock-frequency = <32768>;
> >+ };
> >+
> >+ main_xtal {
> >+ clock-frequency = <6000000>;
> >+ };
> > };
> >
> > ahb {
> >
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 72+ messages in thread
* [PATCHv2 17/32] ARM: at91/dt: ge863-pro3: define crystals frequencies
@ 2014-07-08 11:31 ` Alexandre Belloni
0 siblings, 0 replies; 72+ messages in thread
From: Alexandre Belloni @ 2014-07-08 11:31 UTC (permalink / raw)
To: linux-arm-kernel
On 08/07/2014 at 08:11:29 +0200, Ji?? Prchal wrote :
> Hi,
> the slow crystal is not on the module "ge863-pro3", but it's usually
> on application board. So I think this clock should be in board dts.
>
Right, I'll move the 32kHz crystal to the board dts.
> Dne 7.7.2014 22:23, Alexandre Belloni napsal(a):
> >Define Telit GE863-PRO3, AK signal CDU and Telit EVK-PRO3 main and slow
> >crystals frequencies.
> >
> >Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> >Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
> >Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
> >---
> > arch/arm/boot/dts/ge863-pro3.dtsi | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> >diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
> >index 230099bb31c8..a32fdbefbbd9 100644
> >--- a/arch/arm/boot/dts/ge863-pro3.dtsi
> >+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
> >@@ -19,6 +19,14 @@
> > compatible = "atmel,osc", "fixed-clock";
> > clock-frequency = <6000000>;
> > };
> >+
> >+ slow_xtal {
> >+ clock-frequency = <32768>;
> >+ };
> >+
> >+ main_xtal {
> >+ clock-frequency = <6000000>;
> >+ };
> > };
> >
> > ahb {
> >
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 72+ messages in thread
* Re: [PATCHv2 00/32] ARM: at91: Switch remaining SoCs and boards to CCF
2014-07-07 20:23 ` Alexandre Belloni
@ 2014-07-08 17:11 ` Nicolas Ferre
-1 siblings, 0 replies; 72+ messages in thread
From: Nicolas Ferre @ 2014-07-08 17:11 UTC (permalink / raw)
To: Alexandre Belloni, Boris Brezillon, Maxime Ripard
Cc: Jean-Christophe Plagniol-Villard, linux-arm-kernel, linux-kernel,
Douglas Gilbert, Gregory Hermant, Joachim Eastwood,
Fabio Porcedda, Jiri Prchal, Tim Schendekehl, Gael Portay,
Rodolfo Giometti
On 07/07/2014 22:23, Alexandre Belloni :
> This patch set adds support for the common clock framwork to the remaining atml
> SoCs: at91rm9200, at91sam9260, at91sam9263, at91sam9g45.
>
> It also defines the necessary main crystal and slow crystal frequencies.
>
> I couldn't find datasheets for the following boards:
> - mpa1600
> - ge863-pro3
> - animeo_ip
> - tny_a9260
>
> For those, I assumed the 32kHz crystal is present on the board as this is the
> most common implementation (only one board doesn't have it). Please correct me
> if this is wrong.
>
> I could not test at91rm9200 as I don't own any board with that chip.
It seems okay and I am looking forward to see these board converted:
Nice job!
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
BTW, can you send me pull-requests for the 3.17 material? It can be even
more convenient for me to organize series and dependancis for pushing
upstream. It seems that we have quite a few "cleanup" patches for this
development cycle.
Best regards,
> Changes in v2:
> - Drop patch 3 that has been taken in the clock tree
> - rename tcb*_clk in tc*_clk for rm9200 an sam9260
> - rename tc0_clk in tcb_clk for sam9263
>
> Cc: Douglas Gilbert <dgilbert@interlog.com>
> Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
> Cc: Joachim Eastwood <manabian@gmail.com>
> Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
> Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
> Cc: Tim Schendekehl <tim.schendekehl@egnite.de>
> Cc: Gael Portay <g.portay@overkiz.com>
> Cc: Rodolfo Giometti <giometti@linux.it>
>
> Alexandre Belloni (33):
> Alexandre Belloni (32):
> Documentation: dt: document all the atmel pmc compatibles
> ARM: at91/dt: ariag25: define crystals frequencies
> ARM: at91: prepare common clk transition for rm9200
> ARM: at91/dt: rm9200: define clocks
> ARM: at91: move at91rm9200 SoC to the CCF
> ARM: at91/dt: at91rm9200ek: define crystals frequencies
> ARM: at91: prepare common clk transition for sam9260
> ARM: at91/dt: sam9260: define clocks
> ARM: at91/dt: sam9g20: define clocks
> ARM: at91: move at91sam9260 SoCs to the CCF
> ARM: at91/dt: at91sam9g20ek: define crystals frequencies
> ARM: at91/dt: foxg20: define crystals frequencies
> ARM: at91/dt: usb_a9260: define crystals frequencies
> ARM: at91/dt: tny_a9260: define crystals frequencies
> ARM: at91/dt: qil_a9260: define crystals frequencies
> ARM: at91/dt: mpa1600: define crytals frequencies
> ARM: at91/dt: ge863-pro3: define crystals frequencies
> ARM: at91/dt: ethernut5: define crystals frequencies
> ARM: at91/dt: animeo_ip: define crystals frequencies
> ARM: at91/dt: kizbox: define main crystal frequency
> ARM: at91: prepare common clk transition for sam9g45
> ARM: at91/dt: sam9g45: define clocks
> ARM: at91: move at91sam9g45 SoC to the CCF
> ARM: at91/dt: sam9m10g45ek: define crystals frequencies
> ARM: at91/dt: pm9g45: crystals frequencies
> ARM: at91/dt: cosino define crystals frequencies
> ARM: at91: prepare common clk transition for sam9263
> ARM: at91/dt: sam9263: define clocks
> ARM: at91: move at91sam9263 SoC to the CCF
> ARM: at91/dt: sam9263ek: define crystals frequencies
> ARM: at91/dt: tny_a9263: define crystals frequencies
> ARM: at91/dt: usb_a9263: define crystals frequencies
>
> .../devicetree/bindings/arm/atmel-pmc.txt | 5 +-
> arch/arm/boot/dts/animeo_ip.dts | 8 +
> arch/arm/boot/dts/at91-ariag25.dts | 8 +
> arch/arm/boot/dts/at91-cosino.dtsi | 8 +
> arch/arm/boot/dts/at91-foxg20.dts | 8 +
> arch/arm/boot/dts/at91-qil_a9260.dts | 8 +
> arch/arm/boot/dts/at91rm9200.dtsi | 304 ++++++++++++++++++
> arch/arm/boot/dts/at91rm9200ek.dts | 8 +
> arch/arm/boot/dts/at91sam9260.dtsi | 314 ++++++++++++++++++-
> arch/arm/boot/dts/at91sam9263.dtsi | 311 +++++++++++++++++++
> arch/arm/boot/dts/at91sam9263ek.dts | 8 +
> arch/arm/boot/dts/at91sam9g20.dtsi | 24 ++
> arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 8 +
> arch/arm/boot/dts/at91sam9g45.dtsi | 340 ++++++++++++++++++++-
> arch/arm/boot/dts/at91sam9m10g45ek.dts | 8 +
> arch/arm/boot/dts/ethernut5.dts | 10 +
> arch/arm/boot/dts/ge863-pro3.dtsi | 8 +
> arch/arm/boot/dts/kizbox.dts | 4 +
> arch/arm/boot/dts/mpa1600.dts | 8 +
> arch/arm/boot/dts/pm9g45.dts | 8 +
> arch/arm/boot/dts/tny_a9260_common.dtsi | 8 +
> arch/arm/boot/dts/tny_a9263.dts | 8 +
> arch/arm/boot/dts/usb_a9260_common.dtsi | 8 +
> arch/arm/boot/dts/usb_a9263.dts | 8 +
> arch/arm/mach-at91/Kconfig | 4 -
> arch/arm/mach-at91/at91rm9200.c | 6 +-
> arch/arm/mach-at91/at91sam9260.c | 6 +-
> arch/arm/mach-at91/at91sam9263.c | 6 +-
> arch/arm/mach-at91/at91sam9g45.c | 6 +-
> 29 files changed, 1457 insertions(+), 11 deletions(-)
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 72+ messages in thread
* [PATCHv2 00/32] ARM: at91: Switch remaining SoCs and boards to CCF
@ 2014-07-08 17:11 ` Nicolas Ferre
0 siblings, 0 replies; 72+ messages in thread
From: Nicolas Ferre @ 2014-07-08 17:11 UTC (permalink / raw)
To: linux-arm-kernel
On 07/07/2014 22:23, Alexandre Belloni :
> This patch set adds support for the common clock framwork to the remaining atml
> SoCs: at91rm9200, at91sam9260, at91sam9263, at91sam9g45.
>
> It also defines the necessary main crystal and slow crystal frequencies.
>
> I couldn't find datasheets for the following boards:
> - mpa1600
> - ge863-pro3
> - animeo_ip
> - tny_a9260
>
> For those, I assumed the 32kHz crystal is present on the board as this is the
> most common implementation (only one board doesn't have it). Please correct me
> if this is wrong.
>
> I could not test at91rm9200 as I don't own any board with that chip.
It seems okay and I am looking forward to see these board converted:
Nice job!
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
BTW, can you send me pull-requests for the 3.17 material? It can be even
more convenient for me to organize series and dependancis for pushing
upstream. It seems that we have quite a few "cleanup" patches for this
development cycle.
Best regards,
> Changes in v2:
> - Drop patch 3 that has been taken in the clock tree
> - rename tcb*_clk in tc*_clk for rm9200 an sam9260
> - rename tc0_clk in tcb_clk for sam9263
>
> Cc: Douglas Gilbert <dgilbert@interlog.com>
> Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
> Cc: Joachim Eastwood <manabian@gmail.com>
> Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
> Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
> Cc: Tim Schendekehl <tim.schendekehl@egnite.de>
> Cc: Gael Portay <g.portay@overkiz.com>
> Cc: Rodolfo Giometti <giometti@linux.it>
>
> Alexandre Belloni (33):
> Alexandre Belloni (32):
> Documentation: dt: document all the atmel pmc compatibles
> ARM: at91/dt: ariag25: define crystals frequencies
> ARM: at91: prepare common clk transition for rm9200
> ARM: at91/dt: rm9200: define clocks
> ARM: at91: move at91rm9200 SoC to the CCF
> ARM: at91/dt: at91rm9200ek: define crystals frequencies
> ARM: at91: prepare common clk transition for sam9260
> ARM: at91/dt: sam9260: define clocks
> ARM: at91/dt: sam9g20: define clocks
> ARM: at91: move at91sam9260 SoCs to the CCF
> ARM: at91/dt: at91sam9g20ek: define crystals frequencies
> ARM: at91/dt: foxg20: define crystals frequencies
> ARM: at91/dt: usb_a9260: define crystals frequencies
> ARM: at91/dt: tny_a9260: define crystals frequencies
> ARM: at91/dt: qil_a9260: define crystals frequencies
> ARM: at91/dt: mpa1600: define crytals frequencies
> ARM: at91/dt: ge863-pro3: define crystals frequencies
> ARM: at91/dt: ethernut5: define crystals frequencies
> ARM: at91/dt: animeo_ip: define crystals frequencies
> ARM: at91/dt: kizbox: define main crystal frequency
> ARM: at91: prepare common clk transition for sam9g45
> ARM: at91/dt: sam9g45: define clocks
> ARM: at91: move at91sam9g45 SoC to the CCF
> ARM: at91/dt: sam9m10g45ek: define crystals frequencies
> ARM: at91/dt: pm9g45: crystals frequencies
> ARM: at91/dt: cosino define crystals frequencies
> ARM: at91: prepare common clk transition for sam9263
> ARM: at91/dt: sam9263: define clocks
> ARM: at91: move at91sam9263 SoC to the CCF
> ARM: at91/dt: sam9263ek: define crystals frequencies
> ARM: at91/dt: tny_a9263: define crystals frequencies
> ARM: at91/dt: usb_a9263: define crystals frequencies
>
> .../devicetree/bindings/arm/atmel-pmc.txt | 5 +-
> arch/arm/boot/dts/animeo_ip.dts | 8 +
> arch/arm/boot/dts/at91-ariag25.dts | 8 +
> arch/arm/boot/dts/at91-cosino.dtsi | 8 +
> arch/arm/boot/dts/at91-foxg20.dts | 8 +
> arch/arm/boot/dts/at91-qil_a9260.dts | 8 +
> arch/arm/boot/dts/at91rm9200.dtsi | 304 ++++++++++++++++++
> arch/arm/boot/dts/at91rm9200ek.dts | 8 +
> arch/arm/boot/dts/at91sam9260.dtsi | 314 ++++++++++++++++++-
> arch/arm/boot/dts/at91sam9263.dtsi | 311 +++++++++++++++++++
> arch/arm/boot/dts/at91sam9263ek.dts | 8 +
> arch/arm/boot/dts/at91sam9g20.dtsi | 24 ++
> arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 8 +
> arch/arm/boot/dts/at91sam9g45.dtsi | 340 ++++++++++++++++++++-
> arch/arm/boot/dts/at91sam9m10g45ek.dts | 8 +
> arch/arm/boot/dts/ethernut5.dts | 10 +
> arch/arm/boot/dts/ge863-pro3.dtsi | 8 +
> arch/arm/boot/dts/kizbox.dts | 4 +
> arch/arm/boot/dts/mpa1600.dts | 8 +
> arch/arm/boot/dts/pm9g45.dts | 8 +
> arch/arm/boot/dts/tny_a9260_common.dtsi | 8 +
> arch/arm/boot/dts/tny_a9263.dts | 8 +
> arch/arm/boot/dts/usb_a9260_common.dtsi | 8 +
> arch/arm/boot/dts/usb_a9263.dts | 8 +
> arch/arm/mach-at91/Kconfig | 4 -
> arch/arm/mach-at91/at91rm9200.c | 6 +-
> arch/arm/mach-at91/at91sam9260.c | 6 +-
> arch/arm/mach-at91/at91sam9263.c | 6 +-
> arch/arm/mach-at91/at91sam9g45.c | 6 +-
> 29 files changed, 1457 insertions(+), 11 deletions(-)
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 72+ messages in thread
end of thread, other threads:[~2014-07-08 17:11 UTC | newest]
Thread overview: 72+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-07 20:23 [PATCHv2 00/32] ARM: at91: Switch remaining SoCs and boards to CCF Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 01/32] Documentation: dt: document all the atmel pmc compatibles Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 02/32] ARM: at91/dt: ariag25: define crystals frequencies Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 03/32] ARM: at91: prepare common clk transition for rm9200 Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 04/32] ARM: at91/dt: rm9200: define clocks Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 05/32] ARM: at91: move at91rm9200 SoC to the CCF Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 06/32] ARM: at91/dt: at91rm9200ek: define crystals frequencies Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 07/32] ARM: at91: prepare common clk transition for sam9260 Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 08/32] ARM: at91/dt: sam9260: define clocks Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 09/32] ARM: at91/dt: sam9g20: " Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 10/32] ARM: at91: move at91sam9260 SoCs to the CCF Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 11/32] ARM: at91/dt: at91sam9g20ek: define crystals frequencies Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 12/32] ARM: at91/dt: foxg20: " Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 13/32] ARM: at91/dt: usb_a9260: " Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 14/32] ARM: at91/dt: tny_a9260: " Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 15/32] ARM: at91/dt: qil_a9260: " Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 16/32] ARM: at91/dt: mpa1600: define crytals frequencies Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 17/32] ARM: at91/dt: ge863-pro3: define crystals frequencies Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-08 6:11 ` Jiří Prchal
2014-07-08 6:11 ` Jiří Prchal
2014-07-08 11:31 ` Alexandre Belloni
2014-07-08 11:31 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 18/32] ARM: at91/dt: ethernut5: " Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 19/32] ARM: at91/dt: animeo_ip: " Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 20/32] ARM: at91/dt: kizbox: define main crystal frequency Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 21/32] ARM: at91: prepare common clk transition for sam9g45 Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 22/32] ARM: at91/dt: sam9g45: define clocks Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 23/32] ARM: at91: move at91sam9g45 SoC to the CCF Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 24/32] ARM: at91/dt: sam9m10g45ek: define crystals frequencies Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 25/32] ARM: at91/dt: pm9g45: " Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 26/32] ARM: at91/dt: cosino define " Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 27/32] ARM: at91: prepare common clk transition for sam9263 Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 28/32] ARM: at91/dt: sam9263: define clocks Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 29/32] ARM: at91: move at91sam9263 SoC to the CCF Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 30/32] ARM: at91/dt: sam9263ek: define crystals frequencies Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 31/32] ARM: at91/dt: tny_a9263: " Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-07 20:23 ` [PATCHv2 32/32] ARM: at91/dt: usb_a9263: " Alexandre Belloni
2014-07-07 20:23 ` Alexandre Belloni
2014-07-08 17:11 ` [PATCHv2 00/32] ARM: at91: Switch remaining SoCs and boards to CCF Nicolas Ferre
2014-07-08 17:11 ` Nicolas Ferre
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.