[PATCH][v2] devicetree/binding/powerpc/fsl: Add binding for CPLD

[PATCH][v2] devicetree/binding/powerpc/fsl: Add binding for CPLD

[Priyanka Jain]

Some Freescale boards like T1040RDB have on board CPLD connected on
the IFC bus. Add binding for this in board.txt file

Signed-off-by: Priyanka Jain <Priyanka.Jain-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
Changes for v2:
 convert board name to lower-case based on Scott's suggestions

 .../devicetree/bindings/powerpc/fsl/board.txt      |   19 +++++++++++++++++++
 1 files changed, 19 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
index 700dec4..f35f295 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
@@ -84,3 +84,22 @@ Example:
 		compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
 		reg = <0x66>;
 	};
+
+* Freescale on-board CPLD
+
+Some Freescale boards like T1040RDB have on board CPLD connected on
+the IFC bus.
+
+Required properties:
+- compatible: Should be a board-specific string like "fsl,<board>-cpld"
+  Example:
+	"fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld"
+- reg: Should contain the chip select, address offset and length of the CPLD
+
+Example:
+	cpld@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,t1040rdb-cpld";
+		reg = <3 0 0x300>;
+	};
-- 
1.7.4.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH][v2] devicetree/binding/powerpc/fsl: Add binding for CPLD

[Priyanka Jain]

Some Freescale boards like T1040RDB have on board CPLD connected on
the IFC bus. Add binding for this in board.txt file

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
---
Changes for v2:
 convert board name to lower-case based on Scott's suggestions

 .../devicetree/bindings/powerpc/fsl/board.txt      |   19 +++++++++++++++++++
 1 files changed, 19 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
index 700dec4..f35f295 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
@@ -84,3 +84,22 @@ Example:
 		compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
 		reg = <0x66>;
 	};
+
+* Freescale on-board CPLD
+
+Some Freescale boards like T1040RDB have on board CPLD connected on
+the IFC bus.
+
+Required properties:
+- compatible: Should be a board-specific string like "fsl,<board>-cpld"
+  Example:
+	"fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld"
+- reg: Should contain the chip select, address offset and length of the CPLD
+
+Example:
+	cpld@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,t1040rdb-cpld";
+		reg = <3 0 0x300>;
+	};
-- 
1.7.4.1

Re: [PATCH][v2] devicetree/binding/powerpc/fsl: Add binding for CPLD

[Scott Wood]

On Fri, 2014-07-04 at 10:03 +0530, Priyanka Jain wrote:
> Some Freescale boards like T1040RDB have on board CPLD connected on
> the IFC bus. Add binding for this in board.txt file
> 
> Signed-off-by: Priyanka Jain <Priyanka.Jain-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
> Changes for v2:
>  convert board name to lower-case based on Scott's suggestions
> 
>  .../devicetree/bindings/powerpc/fsl/board.txt      |   19 +++++++++++++++++++
>  1 files changed, 19 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> index 700dec4..f35f295 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> @@ -84,3 +84,22 @@ Example:
>  		compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
>  		reg = <0x66>;
>  	};
> +
> +* Freescale on-board CPLD
> +
> +Some Freescale boards like T1040RDB have on board CPLD connected on
> +the IFC bus.
> +
> +Required properties:
> +- compatible: Should be a board-specific string like "fsl,<board>-cpld"
> +  Example:
> +	"fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld"
> +- reg: Should contain the chip select, address offset and length of the CPLD

We don't say "chip select, address offset and length" anywhere else in
this document.  The reg format expected by the parent node should be
documented in the binding for the parent node (e.g. you could find the
node with a different reg format if for some reason it's not under a
localbus node, such as may happen in certain virtualization
scenarios).  

All you need to say here is that there is one reg region, which
describes the CPLD registers.


> +Example:
> +	cpld@3,0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;

Why do you need #address-cells/#size-cells?

If you do need them, where is ranges and/or a description of what the
child reg format is?

-Scott


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH][v2] devicetree/binding/powerpc/fsl: Add binding for CPLD

[Scott Wood]

On Fri, 2014-07-04 at 10:03 +0530, Priyanka Jain wrote:
> Some Freescale boards like T1040RDB have on board CPLD connected on
> the IFC bus. Add binding for this in board.txt file
> 
> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
> ---
> Changes for v2:
>  convert board name to lower-case based on Scott's suggestions
> 
>  .../devicetree/bindings/powerpc/fsl/board.txt      |   19 +++++++++++++++++++
>  1 files changed, 19 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> index 700dec4..f35f295 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> @@ -84,3 +84,22 @@ Example:
>  		compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
>  		reg = <0x66>;
>  	};
> +
> +* Freescale on-board CPLD
> +
> +Some Freescale boards like T1040RDB have on board CPLD connected on
> +the IFC bus.
> +
> +Required properties:
> +- compatible: Should be a board-specific string like "fsl,<board>-cpld"
> +  Example:
> +	"fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld"
> +- reg: Should contain the chip select, address offset and length of the CPLD

We don't say "chip select, address offset and length" anywhere else in
this document.  The reg format expected by the parent node should be
documented in the binding for the parent node (e.g. you could find the
node with a different reg format if for some reason it's not under a
localbus node, such as may happen in certain virtualization
scenarios).  

All you need to say here is that there is one reg region, which
describes the CPLD registers.


> +Example:
> +	cpld@3,0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;

Why do you need #address-cells/#size-cells?

If you do need them, where is ranges and/or a description of what the
child reg format is?

-Scott

Re: [PATCH][v2]devicetree/binding/powerpc/fsl: Add binding for CPLD

[Scott Wood]

On Tue, 2014-07-08 at 10:36 +0530, Priyanka Jain wrote:
> Some Freescale boards like T1040RDB have on board CPLD connected on
> the IFC bus. Add binding for this in board.txt file
> 
> Signed-off-by: Priyanka Jain <Priyanka.Jain-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
> Changes for v2: Incorporated Scott's comments

Isn't this v3?

>  .../devicetree/bindings/powerpc/fsl/board.txt      |   16 ++++++++++++++++
>  1 files changed, 16 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> index 700dec4..67ef6a4 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> @@ -84,3 +84,19 @@ Example:
>  		compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
>  		reg = <0x66>;
>  	};
> +
> +* Freescale on-board CPLD
> +
> +Some Freescale boards like T1040RDB have on board CPLD connected.

s/have on board/have an on board/

> +
> +Required properties:
> +- compatible: Should be a board-specific string like "fsl,<board>-cpld"
> +  Example:
> +	"fsl,T1040RDB-cpld", "fsl,T1042RDB-cpld", "fsl,T1042RDB_PI-cpld"
> +- reg: should describe CPLD registers
> +
> +Example:
> +	cpld@3,0 {
> +		compatible = "fsl,T1040RDB-cpld";
> +		reg = <3 0 0x300>;
> +	};

Again, please keep the board name lowercase.

-Scott


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH][v2]devicetree/binding/powerpc/fsl: Add binding for CPLD

[Scott Wood]

On Tue, 2014-07-08 at 10:36 +0530, Priyanka Jain wrote:
> Some Freescale boards like T1040RDB have on board CPLD connected on
> the IFC bus. Add binding for this in board.txt file
> 
> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
> ---
> Changes for v2: Incorporated Scott's comments

Isn't this v3?

>  .../devicetree/bindings/powerpc/fsl/board.txt      |   16 ++++++++++++++++
>  1 files changed, 16 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> index 700dec4..67ef6a4 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
> @@ -84,3 +84,19 @@ Example:
>  		compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
>  		reg = <0x66>;
>  	};
> +
> +* Freescale on-board CPLD
> +
> +Some Freescale boards like T1040RDB have on board CPLD connected.

s/have on board/have an on board/

> +
> +Required properties:
> +- compatible: Should be a board-specific string like "fsl,<board>-cpld"
> +  Example:
> +	"fsl,T1040RDB-cpld", "fsl,T1042RDB-cpld", "fsl,T1042RDB_PI-cpld"
> +- reg: should describe CPLD registers
> +
> +Example:
> +	cpld@3,0 {
> +		compatible = "fsl,T1040RDB-cpld";
> +		reg = <3 0 0x300>;
> +	};

Again, please keep the board name lowercase.

-Scott

[PATCH][v2]devicetree/binding/powerpc/fsl: Add binding for CPLD

[Priyanka Jain]

Some Freescale boards like T1040RDB have on board CPLD connected on
the IFC bus. Add binding for this in board.txt file

Signed-off-by: Priyanka Jain <Priyanka.Jain-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
Changes for v2: Incorporated Scott's comments

 .../devicetree/bindings/powerpc/fsl/board.txt      |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
index 700dec4..67ef6a4 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
@@ -84,3 +84,19 @@ Example:
 		compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
 		reg = <0x66>;
 	};
+
+* Freescale on-board CPLD
+
+Some Freescale boards like T1040RDB have on board CPLD connected.
+
+Required properties:
+- compatible: Should be a board-specific string like "fsl,<board>-cpld"
+  Example:
+	"fsl,T1040RDB-cpld", "fsl,T1042RDB-cpld", "fsl,T1042RDB_PI-cpld"
+- reg: should describe CPLD registers
+
+Example:
+	cpld@3,0 {
+		compatible = "fsl,T1040RDB-cpld";
+		reg = <3 0 0x300>;
+	};
-- 
1.7.4.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH][v2]devicetree/binding/powerpc/fsl: Add binding for CPLD

[Priyanka Jain]

Some Freescale boards like T1040RDB have on board CPLD connected on
the IFC bus. Add binding for this in board.txt file

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
---
Changes for v2: Incorporated Scott's comments

 .../devicetree/bindings/powerpc/fsl/board.txt      |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
index 700dec4..67ef6a4 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt
@@ -84,3 +84,19 @@ Example:
 		compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
 		reg = <0x66>;
 	};
+
+* Freescale on-board CPLD
+
+Some Freescale boards like T1040RDB have on board CPLD connected.
+
+Required properties:
+- compatible: Should be a board-specific string like "fsl,<board>-cpld"
+  Example:
+	"fsl,T1040RDB-cpld", "fsl,T1042RDB-cpld", "fsl,T1042RDB_PI-cpld"
+- reg: should describe CPLD registers
+
+Example:
+	cpld@3,0 {
+		compatible = "fsl,T1040RDB-cpld";
+		reg = <3 0 0x300>;
+	};
-- 
1.7.4.1