* [U-Boot] [U-boot] [Patch 0/6] Generalize Keystone2 code for other SoC types
@ 2014-07-09 20:44 Ivan Khoronzhuk
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 1/6] k2hk: use common KS2_ prefix for all hardware definitions Ivan Khoronzhuk
` (5 more replies)
0 siblings, 6 replies; 12+ messages in thread
From: Ivan Khoronzhuk @ 2014-07-09 20:44 UTC (permalink / raw)
To: u-boot
In order to be able to correctly add another Keysotne2 SoC type we
need to make some preparation changes to the sources. So generalize
Keystone2 code for other SoC types, in particular for Keystone 2
Edison (k2e) SoC. It's needed to add support for Keystone2 k2e_evm
evaluation board, so add some preparation in board files too.
Based on "Optimize keystone2 code for other SoC types" series.
http://www.mail-archive.com/u-boot at lists.denx.de/msg141989.html
Hao Zhang (3):
ARM: keystone2: move K2HK board files to common KS2 board directory
configs: k2hk_evm: config: add common EVM configuration header
keystone: ddr3: move K2HK DDR3 configuration to a common file
Ivan Khoronzhuk (2):
k2hk: use common KS2_ prefix for all hardware definitions
ARM: keystone: clock: move K2HK SoC dependent code in separate file
Murali Karicheri (1):
keystone2: add env option to do unitrd dt fixup
arch/arm/cpu/armv7/keystone/Makefile | 1 +
arch/arm/cpu/armv7/keystone/clock-k2hk.c | 113 +++++++
arch/arm/cpu/armv7/keystone/clock.c | 152 ++-------
arch/arm/cpu/armv7/keystone/ddr3.c | 8 +-
arch/arm/cpu/armv7/keystone/init.c | 4 +-
arch/arm/cpu/armv7/keystone/keystone.c | 2 +-
arch/arm/cpu/armv7/keystone/msmc.c | 2 +-
arch/arm/include/asm/arch-keystone/clock-k2hk.h | 23 +-
arch/arm/include/asm/arch-keystone/clock.h | 28 ++
arch/arm/include/asm/arch-keystone/clock_defs.h | 2 +-
arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 202 ++++++------
arch/arm/include/asm/arch-keystone/hardware.h | 4 +-
board/ti/k2hk_evm/Makefile | 9 -
board/ti/k2hk_evm/ddr3.c | 349 ---------------------
board/ti/ks2_evm/Makefile | 11 +
board/ti/{k2hk_evm/README => ks2_evm/README_K2HK} | 0
board/ti/{k2hk_evm => ks2_evm}/board.c | 139 +++-----
board/ti/ks2_evm/board.h | 19 ++
board/ti/ks2_evm/board_k2hk.c | 81 +++++
board/ti/ks2_evm/ddr3_cfg.c | 130 ++++++++
board/ti/ks2_evm/ddr3_cfg.h | 21 ++
board/ti/ks2_evm/ddr3_k2hk.c | 84 +++++
boards.cfg | 2 +-
include/configs/k2hk_evm.h | 257 +--------------
include/configs/ks2_evm.h | 275 ++++++++++++++++
25 files changed, 952 insertions(+), 966 deletions(-)
create mode 100644 arch/arm/cpu/armv7/keystone/clock-k2hk.c
delete mode 100644 board/ti/k2hk_evm/Makefile
delete mode 100644 board/ti/k2hk_evm/ddr3.c
create mode 100644 board/ti/ks2_evm/Makefile
rename board/ti/{k2hk_evm/README => ks2_evm/README_K2HK} (100%)
rename board/ti/{k2hk_evm => ks2_evm}/board.c (68%)
create mode 100644 board/ti/ks2_evm/board.h
create mode 100644 board/ti/ks2_evm/board_k2hk.c
create mode 100644 board/ti/ks2_evm/ddr3_cfg.c
create mode 100644 board/ti/ks2_evm/ddr3_cfg.h
create mode 100644 board/ti/ks2_evm/ddr3_k2hk.c
create mode 100644 include/configs/ks2_evm.h
--
1.8.3.2
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [U-boot] [Patch 1/6] k2hk: use common KS2_ prefix for all hardware definitions
2014-07-09 20:44 [U-Boot] [U-boot] [Patch 0/6] Generalize Keystone2 code for other SoC types Ivan Khoronzhuk
@ 2014-07-09 20:44 ` Ivan Khoronzhuk
2014-07-26 1:27 ` [U-Boot] [U-Boot, U-boot, " Tom Rini
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 2/6] keystone2: add env option to do unitrd dt fixup Ivan Khoronzhuk
` (4 subsequent siblings)
5 siblings, 1 reply; 12+ messages in thread
From: Ivan Khoronzhuk @ 2014-07-09 20:44 UTC (permalink / raw)
To: u-boot
Use KS2_ prefix in all definitions, for that replace K2HK_ prefix and
add KS2_ prefix where it's needed. It requires to change names also
in places where they're used. Align lines and remove redundant
definitions in kardware-k2hk.h at the same time.
Using common KS2_ prefix helps resolve redundant redefinitions and
adds opportunity to use KS2_ definition across a project not thinking about
what SoC should be used. It's more convenient and we don't need to worry
about the SoC type in common files, hardware.h will think about that.
The hardware.h decides definitions of what SoC to use.
Acked-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
arch/arm/cpu/armv7/keystone/clock.c | 24 +--
arch/arm/cpu/armv7/keystone/ddr3.c | 8 +-
arch/arm/cpu/armv7/keystone/init.c | 4 +-
arch/arm/cpu/armv7/keystone/keystone.c | 2 +-
arch/arm/cpu/armv7/keystone/msmc.c | 2 +-
arch/arm/include/asm/arch-keystone/clock-k2hk.h | 2 +-
arch/arm/include/asm/arch-keystone/clock_defs.h | 2 +-
arch/arm/include/asm/arch-keystone/hardware-k2hk.h | 202 ++++++++++-----------
arch/arm/include/asm/arch-keystone/hardware.h | 4 +-
board/ti/k2hk_evm/ddr3.c | 24 +--
include/configs/k2hk_evm.h | 12 +-
11 files changed, 138 insertions(+), 148 deletions(-)
diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c
index bfa4c9d..f905fdc 100644
--- a/arch/arm/cpu/armv7/keystone/clock.c
+++ b/arch/arm/cpu/armv7/keystone/clock.c
@@ -29,11 +29,11 @@ struct pll_regs {
};
static const struct pll_regs pll_regs[] = {
- [CORE_PLL] = { K2HK_MAINPLLCTL0, K2HK_MAINPLLCTL1},
- [PASS_PLL] = { K2HK_PASSPLLCTL0, K2HK_PASSPLLCTL1},
- [TETRIS_PLL] = { K2HK_ARMPLLCTL0, K2HK_ARMPLLCTL1},
- [DDR3A_PLL] = { K2HK_DDR3APLLCTL0, K2HK_DDR3APLLCTL1},
- [DDR3B_PLL] = { K2HK_DDR3BPLLCTL0, K2HK_DDR3BPLLCTL1},
+ [CORE_PLL] = { KS2_MAINPLLCTL0, KS2_MAINPLLCTL1},
+ [PASS_PLL] = { KS2_PASSPLLCTL0, KS2_PASSPLLCTL1},
+ [TETRIS_PLL] = { KS2_ARMPLLCTL0, KS2_ARMPLLCTL1},
+ [DDR3A_PLL] = { KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1},
+ [DDR3B_PLL] = { KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1},
};
/* Fout = Fref * NF(mult) / NR(prediv) / OD */
@@ -47,7 +47,7 @@ static unsigned long pll_freq_get(int pll)
ret = external_clk[sys_clk];
if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) {
/* PLL mode */
- tmp = __raw_readl(K2HK_MAINPLLCTL0);
+ tmp = __raw_readl(KS2_MAINPLLCTL0);
prediv = (tmp & PLL_DIV_MASK) + 1;
mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) |
(pllctl_reg_read(pll, mult) &
@@ -61,19 +61,19 @@ static unsigned long pll_freq_get(int pll)
switch (pll) {
case PASS_PLL:
ret = external_clk[pa_clk];
- reg = K2HK_PASSPLLCTL0;
+ reg = KS2_PASSPLLCTL0;
break;
case TETRIS_PLL:
ret = external_clk[tetris_clk];
- reg = K2HK_ARMPLLCTL0;
+ reg = KS2_ARMPLLCTL0;
break;
case DDR3A_PLL:
ret = external_clk[ddr3a_clk];
- reg = K2HK_DDR3APLLCTL0;
+ reg = KS2_DDR3APLLCTL0;
break;
case DDR3B_PLL:
ret = external_clk[ddr3b_clk];
- reg = K2HK_DDR3BPLLCTL0;
+ reg = KS2_DDR3BPLLCTL0;
break;
default:
return 0;
@@ -214,7 +214,7 @@ void init_pll(const struct pll_init_data *data)
* Set CHIPMISCCTL1[13] = 0 (enable glitchfree bypass)
* only applicable for Kepler
*/
- clrbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN);
+ clrbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN);
/* 2 In PLLCTL1, write PLLRST = 1 (PLL is reset) */
setbits_le32(pll_regs[data->pll].reg1 ,
PLL_PLLRST | PLLCTL_ENSAT);
@@ -255,7 +255,7 @@ void init_pll(const struct pll_init_data *data)
* 9 Set CHIPMISCCTL1[13] = 1 (disable glitchfree bypass)
* only applicable for Kepler
*/
- setbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN);
+ setbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN);
} else {
setbits_le32(pll_regs[data->pll].reg1, PLLCTL_ENSAT);
/*
diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c
index b711b81..2391e79 100644
--- a/arch/arm/cpu/armv7/keystone/ddr3.c
+++ b/arch/arm/cpu/armv7/keystone/ddr3.c
@@ -74,15 +74,15 @@ void ddr3_reset_ddrphy(void)
u32 tmp;
/* Assert DDR3A PHY reset */
- tmp = readl(K2HK_DDR3APLLCTL1);
+ tmp = readl(KS2_DDR3APLLCTL1);
tmp |= KS2_DDR3_PLLCTRL_PHY_RESET;
- writel(tmp, K2HK_DDR3APLLCTL1);
+ writel(tmp, KS2_DDR3APLLCTL1);
/* wait 10us to catch the reset */
udelay(10);
/* Release DDR3A PHY reset */
- tmp = readl(K2HK_DDR3APLLCTL1);
+ tmp = readl(KS2_DDR3APLLCTL1);
tmp &= ~KS2_DDR3_PLLCTRL_PHY_RESET;
- __raw_writel(tmp, K2HK_DDR3APLLCTL1);
+ __raw_writel(tmp, KS2_DDR3APLLCTL1);
}
diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c
index 4df5ae1..f4c293a 100644
--- a/arch/arm/cpu/armv7/keystone/init.c
+++ b/arch/arm/cpu/armv7/keystone/init.c
@@ -15,8 +15,8 @@
void chip_configuration_unlock(void)
{
- __raw_writel(KEYSTONE_KICK0_MAGIC, KEYSTONE_KICK0);
- __raw_writel(KEYSTONE_KICK1_MAGIC, KEYSTONE_KICK1);
+ __raw_writel(KS2_KICK0_MAGIC, KS2_KICK0);
+ __raw_writel(KS2_KICK1_MAGIC, KS2_KICK1);
}
int arch_cpu_init(void)
diff --git a/arch/arm/cpu/armv7/keystone/keystone.c b/arch/arm/cpu/armv7/keystone/keystone.c
index 1c8c038..11a9357 100644
--- a/arch/arm/cpu/armv7/keystone/keystone.c
+++ b/arch/arm/cpu/armv7/keystone/keystone.c
@@ -23,7 +23,7 @@ int cpu_to_bus(u32 *ptr, u32 length)
{
u32 i;
- if (!(readl(K2HK_DEVSTAT) & 0x1))
+ if (!(readl(KS2_DEVSTAT) & 0x1))
for (i = 0; i < length; i++, ptr++)
*ptr = cpu_to_be32(*ptr);
diff --git a/arch/arm/cpu/armv7/keystone/msmc.c b/arch/arm/cpu/armv7/keystone/msmc.c
index f3f1621..af858fa 100644
--- a/arch/arm/cpu/armv7/keystone/msmc.c
+++ b/arch/arm/cpu/armv7/keystone/msmc.c
@@ -58,7 +58,7 @@ struct msms_regs {
void share_all_segments(int priv_id)
{
- struct msms_regs *msmc = (struct msms_regs *)K2HK_MSMC_CTRL_BASE;
+ struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE;
int j;
for (j = 0; j < 8; j++) {
diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/include/asm/arch-keystone/clock-k2hk.h
index 6a69a8d..ed1225c 100644
--- a/arch/arm/include/asm/arch-keystone/clock-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/clock-k2hk.h
@@ -56,7 +56,7 @@ enum clk_e {
sys_clk3_clk
};
-#define K2HK_CLK1_6 sys_clk0_6_clk
+#define KS2_CLK1_6 sys_clk0_6_clk
/* PLL identifiers */
enum pll_type_e {
diff --git a/arch/arm/include/asm/arch-keystone/clock_defs.h b/arch/arm/include/asm/arch-keystone/clock_defs.h
index b251aff..e545341 100644
--- a/arch/arm/include/asm/arch-keystone/clock_defs.h
+++ b/arch/arm/include/asm/arch-keystone/clock_defs.h
@@ -50,7 +50,7 @@ struct pllctl_regs {
};
static struct pllctl_regs *pllctl_regs[] = {
- (struct pllctl_regs *)(CLOCK_BASE + 0x100)
+ (struct pllctl_regs *)(KS2_CLOCK_BASE + 0x100)
};
#define pllctl_reg(pll, reg) (&(pllctl_regs[pll]->reg))
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
index 5e2f659..e7dff05 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
@@ -6,134 +6,124 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
+
#ifndef __ASM_ARCH_HARDWARE_K2HK_H
#define __ASM_ARCH_HARDWARE_K2HK_H
-#define K2HK_PLL_CNTRL_BASE 0x02310000
-#define CLOCK_BASE K2HK_PLL_CNTRL_BASE
-#define KS2_RSTCTRL (K2HK_PLL_CNTRL_BASE + 0xe8)
-#define KS2_RSTCTRL_KEY 0x5a69
-#define KS2_RSTCTRL_MASK 0xffff0000
-#define KS2_RSTCTRL_SWRST 0xfffe0000
+#define KS2_PLL_CNTRL_BASE 0x02310000
+#define KS2_CLOCK_BASE KS2_PLL_CNTRL_BASE
+#define KS2_RSTCTRL (KS2_PLL_CNTRL_BASE + 0xe8)
+#define KS2_RSTCTRL_KEY 0x5a69
+#define KS2_RSTCTRL_MASK 0xffff0000
+#define KS2_RSTCTRL_SWRST 0xfffe0000
-#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000
-#define JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18)
-#define K2HK_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20)
+#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000
+#define KS2_JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18)
+#define KS2_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20)
-#define K2HK_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c)
+#define KS2_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c)
-#define ARM_PLL_EN BIT(13)
+#define KS2_ARM_PLL_EN BIT(13)
-#define K2HK_SPI0_BASE 0x21000400
-#define K2HK_SPI1_BASE 0x21000600
-#define K2HK_SPI2_BASE 0x21000800
-#define K2HK_SPI_BASE K2HK_SPI0_BASE
+#define KS2_SPI0_BASE 0x21000400
+#define KS2_SPI1_BASE 0x21000600
+#define KS2_SPI2_BASE 0x21000800
+#define KS2_SPI_BASE KS2_SPI0_BASE
/* Chip configuration unlock codes and registers */
-#define KEYSTONE_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38)
-#define KEYSTONE_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c)
-#define KEYSTONE_KICK0_MAGIC 0x83e70b13
-#define KEYSTONE_KICK1_MAGIC 0x95a4f1e0
+#define KS2_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38)
+#define KS2_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c)
+#define KS2_KICK0_MAGIC 0x83e70b13
+#define KS2_KICK1_MAGIC 0x95a4f1e0
/* PA SS Registers */
-#define KS2_PASS_BASE 0x02000000
+#define KS2_PASS_BASE 0x02000000
/* PLL control registers */
-#define K2HK_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350)
-#define K2HK_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354)
-#define K2HK_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358)
-#define K2HK_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C)
-#define K2HK_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360)
-#define K2HK_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364)
-#define K2HK_DDR3BPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x368)
-#define K2HK_DDR3BPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x36C)
-#define K2HK_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370)
-#define K2HK_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374)
+#define KS2_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350)
+#define KS2_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354)
+#define KS2_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358)
+#define KS2_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C)
+#define KS2_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360)
+#define KS2_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364)
+#define KS2_DDR3BPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x368)
+#define KS2_DDR3BPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x36C)
+#define KS2_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370)
+#define KS2_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374)
/* Power and Sleep Controller (PSC) Domains */
-#define K2HK_LPSC_MOD 0
-#define K2HK_LPSC_DUMMY1 1
-#define K2HK_LPSC_USB 2
-#define K2HK_LPSC_EMIF25_SPI 3
-#define K2HK_LPSC_TSIP 4
-#define K2HK_LPSC_DEBUGSS_TRC 5
-#define K2HK_LPSC_TETB_TRC 6
-#define K2HK_LPSC_PKTPROC 7
-#define KS2_LPSC_PA K2HK_LPSC_PKTPROC
-#define K2HK_LPSC_SGMII 8
-#define KS2_LPSC_CPGMAC K2HK_LPSC_SGMII
-#define K2HK_LPSC_CRYPTO 9
-#define K2HK_LPSC_PCIE 10
-#define K2HK_LPSC_SRIO 11
-#define K2HK_LPSC_VUSR0 12
-#define K2HK_LPSC_CHIP_SRSS 13
-#define K2HK_LPSC_MSMC 14
-#define K2HK_LPSC_GEM_1 16
-#define K2HK_LPSC_GEM_2 17
-#define K2HK_LPSC_GEM_3 18
-#define K2HK_LPSC_GEM_4 19
-#define K2HK_LPSC_GEM_5 20
-#define K2HK_LPSC_GEM_6 21
-#define K2HK_LPSC_GEM_7 22
-#define K2HK_LPSC_EMIF4F_DDR3A 23
-#define K2HK_LPSC_EMIF4F_DDR3B 24
-#define K2HK_LPSC_TAC 25
-#define K2HK_LPSC_RAC 26
-#define K2HK_LPSC_RAC_1 27
-#define K2HK_LPSC_FFTC_A 28
-#define K2HK_LPSC_FFTC_B 29
-#define K2HK_LPSC_FFTC_C 30
-#define K2HK_LPSC_FFTC_D 31
-#define K2HK_LPSC_FFTC_E 32
-#define K2HK_LPSC_FFTC_F 33
-#define K2HK_LPSC_AI2 34
-#define K2HK_LPSC_TCP3D_0 35
-#define K2HK_LPSC_TCP3D_1 36
-#define K2HK_LPSC_TCP3D_2 37
-#define K2HK_LPSC_TCP3D_3 38
-#define K2HK_LPSC_VCP2X4_A 39
-#define K2HK_LPSC_CP2X4_B 40
-#define K2HK_LPSC_VCP2X4_C 41
-#define K2HK_LPSC_VCP2X4_D 42
-#define K2HK_LPSC_VCP2X4_E 43
-#define K2HK_LPSC_VCP2X4_F 44
-#define K2HK_LPSC_VCP2X4_G 45
-#define K2HK_LPSC_VCP2X4_H 46
-#define K2HK_LPSC_BCP 47
-#define K2HK_LPSC_DXB 48
-#define K2HK_LPSC_VUSR1 49
-#define K2HK_LPSC_XGE 50
-#define K2HK_LPSC_ARM_SREFLEX 51
+#define KS2_LPSC_MOD 0
+#define KS2_LPSC_DUMMY1 1
+#define KS2_LPSC_USB 2
+#define KS2_LPSC_EMIF25_SPI 3
+#define KS2_LPSC_TSIP 4
+#define KS2_LPSC_DEBUGSS_TRC 5
+#define KS2_LPSC_TETB_TRC 6
+#define KS2_LPSC_PKTPROC 7
+#define KS2_LPSC_PA KS2_LPSC_PKTPROC
+#define KS2_LPSC_SGMII 8
+#define KS2_LPSC_CPGMAC KS2_LPSC_SGMII
+#define KS2_LPSC_CRYPTO 9
+#define KS2_LPSC_PCIE 10
+#define KS2_LPSC_SRIO 11
+#define KS2_LPSC_VUSR0 12
+#define KS2_LPSC_CHIP_SRSS 13
+#define KS2_LPSC_MSMC 14
+#define KS2_LPSC_GEM_1 16
+#define KS2_LPSC_GEM_2 17
+#define KS2_LPSC_GEM_3 18
+#define KS2_LPSC_GEM_4 19
+#define KS2_LPSC_GEM_5 20
+#define KS2_LPSC_GEM_6 21
+#define KS2_LPSC_GEM_7 22
+#define KS2_LPSC_EMIF4F_DDR3A 23
+#define KS2_LPSC_EMIF4F_DDR3B 24
+#define KS2_LPSC_TAC 25
+#define KS2_LPSC_RAC 26
+#define KS2_LPSC_RAC_1 27
+#define KS2_LPSC_FFTC_A 28
+#define KS2_LPSC_FFTC_B 29
+#define KS2_LPSC_FFTC_C 30
+#define KS2_LPSC_FFTC_D 31
+#define KS2_LPSC_FFTC_E 32
+#define KS2_LPSC_FFTC_F 33
+#define KS2_LPSC_AI2 34
+#define KS2_LPSC_TCP3D_0 35
+#define KS2_LPSC_TCP3D_1 36
+#define KS2_LPSC_TCP3D_2 37
+#define KS2_LPSC_TCP3D_3 38
+#define KS2_LPSC_VCP2X4_A 39
+#define KS2_LPSC_CP2X4_B 40
+#define KS2_LPSC_VCP2X4_C 41
+#define KS2_LPSC_VCP2X4_D 42
+#define KS2_LPSC_VCP2X4_E 43
+#define KS2_LPSC_VCP2X4_F 44
+#define KS2_LPSC_VCP2X4_G 45
+#define KS2_LPSC_VCP2X4_H 46
+#define KS2_LPSC_BCP 47
+#define KS2_LPSC_DXB 48
+#define KS2_LPSC_VUSR1 49
+#define KS2_LPSC_XGE 50
+#define KS2_LPSC_ARM_SREFLEX 51
/* DDR3A definitions */
-#define K2HK_DDR3A_EMIF_CTRL_BASE 0x21010000
-#define K2HK_DDR3A_EMIF_DATA_BASE 0x80000000
-#define K2HK_DDR3A_DDRPHYC 0x02329000
+#define KS2_DDR3A_EMIF_CTRL_BASE 0x21010000
+#define KS2_DDR3A_EMIF_DATA_BASE 0x80000000
+#define KS2_DDR3A_DDRPHYC 0x02329000
/* DDR3B definitions */
-#define K2HK_DDR3B_EMIF_CTRL_BASE 0x21020000
-#define K2HK_DDR3B_EMIF_DATA_BASE 0x60000000
-#define K2HK_DDR3B_DDRPHYC 0x02328000
+#define KS2_DDR3B_EMIF_CTRL_BASE 0x21020000
+#define KS2_DDR3B_EMIF_DATA_BASE 0x60000000
+#define KS2_DDR3B_DDRPHYC 0x02328000
/* Queue manager */
-#define DEVICE_QM_MANAGER_BASE 0x02a02000
-#define DEVICE_QM_DESC_SETUP_BASE 0x02a03000
-#define DEVICE_QM_MANAGER_QUEUES_BASE 0x02a80000
-#define DEVICE_QM_MANAGER_Q_PROXY_BASE 0x02ac0000
-#define DEVICE_QM_QUEUE_STATUS_BASE 0x02a40000
-#define DEVICE_QM_NUM_LINKRAMS 2
-#define DEVICE_QM_NUM_MEMREGIONS 20
-
-#define DEVICE_PA_CDMA_GLOBAL_CFG_BASE 0x02004000
-#define DEVICE_PA_CDMA_TX_CHAN_CFG_BASE 0x02004400
-#define DEVICE_PA_CDMA_RX_CHAN_CFG_BASE 0x02004800
-#define DEVICE_PA_CDMA_RX_FLOW_CFG_BASE 0x02005000
-
-#define DEVICE_PA_CDMA_RX_NUM_CHANNELS 24
-#define DEVICE_PA_CDMA_RX_NUM_FLOWS 32
-#define DEVICE_PA_CDMA_TX_NUM_CHANNELS 9
+#define KS2_QM_MANAGER_BASE 0x02a02000
+#define KS2_QM_DESC_SETUP_BASE 0x02a03000
+#define KS2_QM_MANAGER_QUEUES_BASEi 0x02a80000
+#define KS2_QM_MANAGER_Q_PROXY_BASE 0x02ac0000
+#define KS2_QM_QUEUE_STATUS_BASE 0x02a40000
/* MSMC control */
-#define K2HK_MSMC_CTRL_BASE 0x0bc00000
+#define KS2_MSMC_CTRL_BASE 0x0bc00000
/* Number of DSP cores */
#define KS2_NUM_DSPS 8
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index 0dcc31a..133edad 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -105,7 +105,7 @@ typedef volatile unsigned int *dv_reg_p;
#ifndef __ASSEMBLY__
static inline int cpu_is_k2hk(void)
{
- unsigned int jtag_id = __raw_readl(JTAG_ID_REG);
+ unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG);
unsigned int part_no = (jtag_id >> 12) & 0xffff;
return (part_no == 0xb981) ? 1 : 0;
@@ -113,7 +113,7 @@ static inline int cpu_is_k2hk(void)
static inline int cpu_revision(void)
{
- unsigned int jtag_id = __raw_readl(JTAG_ID_REG);
+ unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG);
unsigned int rev = (jtag_id >> 28) & 0xf;
return rev;
diff --git a/board/ti/k2hk_evm/ddr3.c b/board/ti/k2hk_evm/ddr3.c
index b604266..31e9c31 100644
--- a/board/ti/k2hk_evm/ddr3.c
+++ b/board/ti/k2hk_evm/ddr3.c
@@ -299,20 +299,20 @@ void ddr3_init(void)
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
- ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC,
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1600_64A_pg2);
} else {
/* PG 1.1 */
- ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC,
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1600_64A);
}
- ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE,
+ ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1600_64);
printf("DRAM: Capacity 8 GiB (includes reported below)\n");
} else {
- ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_32);
- ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE,
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_32);
+ ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1600_32);
printf("DRAM: Capacity 4 GiB (includes reported below)\n");
}
@@ -323,18 +323,18 @@ void ddr3_init(void)
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
- ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC,
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1333_64A_pg2);
} else {
/* PG 1.1 */
- ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC,
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1333_64A);
}
- ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE,
+ ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1333_64);
} else {
- ddr3_init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_32);
- ddr3_init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE,
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_32);
+ ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1333_32);
}
} else {
@@ -344,6 +344,6 @@ void ddr3_init(void)
}
init_pll(&ddr3b_333);
- ddr3_init_ddrphy(K2HK_DDR3B_DDRPHYC, &ddr3phy_1333_64);
- ddr3_init_ddremif(K2HK_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64);
+ ddr3_init_ddrphy(KS2_DDR3B_DDRPHYC, &ddr3phy_1333_64);
+ ddr3_init_ddremif(KS2_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64);
}
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index 63e0249..bacf3bc 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -73,7 +73,7 @@
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE
#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE
-#define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6)
+#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6)
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
@@ -83,16 +83,16 @@
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_DAVINCI_SPI
#define CONFIG_SYS_SPI0
-#define CONFIG_SYS_SPI_BASE K2HK_SPI_BASE
+#define CONFIG_SYS_SPI_BASE KS2_SPI_BASE
#define CONFIG_SYS_SPI0_NUM_CS 4
#define CONFIG_SYS_SPI1
-#define CONFIG_SYS_SPI1_BASE K2HK_SPI1_BASE
+#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE
#define CONFIG_SYS_SPI1_NUM_CS 4
#define CONFIG_SYS_SPI2
#define CONFIG_SYS_SPI2_NUM_CS 4
-#define CONFIG_SYS_SPI2_BASE K2HK_SPI2_BASE
+#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE
#define CONFIG_CMD_SPI
-#define CONFIG_SYS_SPI_CLK clk_get_rate(K2HK_LPSC_EMIF25_SPI)
+#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_LPSC_EMIF25_SPI)
#define CONFIG_SF_DEFAULT_SPEED 30000000
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
@@ -264,6 +264,6 @@
/* we may include files below only after all above definitions */
#include <asm/arch/hardware.h>
#include <asm/arch/clock.h>
-#define CONFIG_SYS_HZ_CLOCK clk_get_rate(K2HK_CLK1_6)
+#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6)
#endif /* __CONFIG_K2HK_EVM_H */
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [U-boot] [Patch 2/6] keystone2: add env option to do unitrd dt fixup
2014-07-09 20:44 [U-Boot] [U-boot] [Patch 0/6] Generalize Keystone2 code for other SoC types Ivan Khoronzhuk
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 1/6] k2hk: use common KS2_ prefix for all hardware definitions Ivan Khoronzhuk
@ 2014-07-09 20:44 ` Ivan Khoronzhuk
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 3/6] ARM: keystone2: move K2HK board files to common KS2 board directory Ivan Khoronzhuk
` (3 subsequent siblings)
5 siblings, 0 replies; 12+ messages in thread
From: Ivan Khoronzhuk @ 2014-07-09 20:44 UTC (permalink / raw)
To: u-boot
From: Murali Karicheri <m-karicheri2@ti.com>
With latest v3.13 kernel, unitrd dt fixup is not needed. However for
older kernel versions such as v3.8/v3.10, it is needed. So to work
with both, add a u-boot env variable that can be set to do dt fixup
for older kernels.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
board/ti/k2hk_evm/board.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/board/ti/k2hk_evm/board.c b/board/ti/k2hk_evm/board.c
index 3333eb0..646ecb3 100644
--- a/board/ti/k2hk_evm/board.c
+++ b/board/ti/k2hk_evm/board.c
@@ -157,11 +157,14 @@ void ft_board_setup(void *blob, bd_t *bd)
u64 size[2];
char name[32], *env, *endp;
int lpae, nodeoffset;
+ int unitrd_fixup = 0;
u32 ddr3a_size;
int nbanks;
env = getenv("mem_lpae");
lpae = env && simple_strtol(env, NULL, 0);
+ env = getenv("uinitrd_fixup");
+ unitrd_fixup = env && simple_strtol(env, NULL, 0);
ddr3a_size = 0;
if (lpae) {
@@ -204,10 +207,11 @@ void ft_board_setup(void *blob, bd_t *bd)
fdt_fixup_memory_banks(blob, start, size, nbanks);
/* Fix up the initrd */
- if (lpae) {
+ if (lpae && unitrd_fixup) {
u64 initrd_start, initrd_end;
u32 *prop1, *prop2;
int err;
+
nodeoffset = fdt_path_offset(blob, "/chosen");
if (nodeoffset >= 0) {
prop1 = (u32 *)fdt_getprop(blob, nodeoffset,
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [U-boot] [Patch 3/6] ARM: keystone2: move K2HK board files to common KS2 board directory
2014-07-09 20:44 [U-Boot] [U-boot] [Patch 0/6] Generalize Keystone2 code for other SoC types Ivan Khoronzhuk
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 1/6] k2hk: use common KS2_ prefix for all hardware definitions Ivan Khoronzhuk
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 2/6] keystone2: add env option to do unitrd dt fixup Ivan Khoronzhuk
@ 2014-07-09 20:44 ` Ivan Khoronzhuk
2014-07-26 1:27 ` [U-Boot] [U-Boot, U-boot, " Tom Rini
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 4/6] ARM: keystone: clock: move K2HK SoC dependent code in separate file Ivan Khoronzhuk
` (2 subsequent siblings)
5 siblings, 1 reply; 12+ messages in thread
From: Ivan Khoronzhuk @ 2014-07-09 20:44 UTC (permalink / raw)
To: u-boot
From: Hao Zhang <hzhang@ti.com>
This patch moves K2HK board directory to a common Keystone II board
directory. The Board related common functions are moved to a common
keystone board file.
Acked-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
board/ti/{k2hk_evm => ks2_evm}/Makefile | 7 +-
board/ti/{k2hk_evm/README => ks2_evm/README_K2HK} | 0
board/ti/{k2hk_evm => ks2_evm}/board.c | 135 ++++++----------------
board/ti/ks2_evm/board.h | 19 +++
board/ti/ks2_evm/board_k2hk.c | 81 +++++++++++++
board/ti/{k2hk_evm/ddr3.c => ks2_evm/ddr3_k2hk.c} | 0
boards.cfg | 2 +-
include/configs/k2hk_evm.h | 1 +
8 files changed, 142 insertions(+), 103 deletions(-)
rename board/ti/{k2hk_evm => ks2_evm}/Makefile (50%)
rename board/ti/{k2hk_evm/README => ks2_evm/README_K2HK} (100%)
rename board/ti/{k2hk_evm => ks2_evm}/board.c (69%)
create mode 100644 board/ti/ks2_evm/board.h
create mode 100644 board/ti/ks2_evm/board_k2hk.c
rename board/ti/{k2hk_evm/ddr3.c => ks2_evm/ddr3_k2hk.c} (100%)
diff --git a/board/ti/k2hk_evm/Makefile b/board/ti/ks2_evm/Makefile
similarity index 50%
rename from board/ti/k2hk_evm/Makefile
rename to board/ti/ks2_evm/Makefile
index 3645f2f..58d77dc 100644
--- a/board/ti/k2hk_evm/Makefile
+++ b/board/ti/ks2_evm/Makefile
@@ -1,9 +1,10 @@
#
-# K2HK-EVM: board Makefile
+# KS2-EVM: board Makefile
# (C) Copyright 2012-2014
# Texas Instruments Incorporated, <www.ti.com>
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += board.o
-obj-y += ddr3.o
+obj-y += board.o
+obj-$(CONFIG_K2HK_EVM) += board_k2hk.o
+obj-$(CONFIG_K2HK_EVM) += ddr3_k2hk.o
diff --git a/board/ti/k2hk_evm/README b/board/ti/ks2_evm/README_K2HK
similarity index 100%
rename from board/ti/k2hk_evm/README
rename to board/ti/ks2_evm/README_K2HK
diff --git a/board/ti/k2hk_evm/board.c b/board/ti/ks2_evm/board.c
similarity index 69%
rename from board/ti/k2hk_evm/board.c
rename to board/ti/ks2_evm/board.c
index 646ecb3..dfe7be6 100644
--- a/board/ti/k2hk_evm/board.c
+++ b/board/ti/ks2_evm/board.c
@@ -1,44 +1,22 @@
/*
- * K2HK EVM : Board initialization
+ * Keystone : Board initialization
*
- * (C) Copyright 2012-2014
+ * (C) Copyright 2014
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
+#include "board.h"
#include <common.h>
#include <exports.h>
#include <fdt_support.h>
-#include <libfdt.h>
-
#include <asm/arch/ddr3.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/clock.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
#include <asm/arch/emac_defs.h>
-#include <asm/arch/psc_defs.h>
#include <asm/ti-common/ti-aemif.h>
DECLARE_GLOBAL_DATA_PTR;
-unsigned int external_clk[ext_clk_count] = {
- [sys_clk] = 122880000,
- [alt_core_clk] = 125000000,
- [pa_clk] = 122880000,
- [tetris_clk] = 125000000,
- [ddr3a_clk] = 100000000,
- [ddr3b_clk] = 100000000,
- [mcm_clk] = 312500000,
- [pcie_clk] = 100000000,
- [sgmii_srio_clk] = 156250000,
- [xgmii_clk] = 156250000,
- [usb_clk] = 100000000,
- [rp1_clk] = 123456789 /* TODO: cannot find
- what is that */
-};
-
static struct aemif_config aemif_configs[] = {
{ /* CS0 */
.mode = AEMIF_MODE_NAND,
@@ -51,13 +29,6 @@ static struct aemif_config aemif_configs[] = {
.turn_around = 3,
.width = AEMIF_WIDTH_8,
},
-
-};
-
-static struct pll_init_data pll_config[] = {
- CORE_PLL_1228,
- PASS_PLL_983,
- TETRIS_PLL_1200,
};
int dram_init(void)
@@ -70,42 +41,18 @@ int dram_init(void)
return 0;
}
-#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
-struct eth_priv_t eth_priv_cfg[] = {
- {
- .int_name = "K2HK_EMAC",
- .rx_flow = 22,
- .phy_addr = 0,
- .slave_port = 1,
- .sgmii_link_type = SGMII_LINK_MAC_PHY,
- },
- {
- .int_name = "K2HK_EMAC1",
- .rx_flow = 23,
- .phy_addr = 1,
- .slave_port = 2,
- .sgmii_link_type = SGMII_LINK_MAC_PHY,
- },
- {
- .int_name = "K2HK_EMAC2",
- .rx_flow = 24,
- .phy_addr = 2,
- .slave_port = 3,
- .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
- },
- {
- .int_name = "K2HK_EMAC3",
- .rx_flow = 25,
- .phy_addr = 3,
- .slave_port = 4,
- .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
- },
-};
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CONFIG_LINUX_BOOT_PARAM_ADDR;
+
+ return 0;
+}
+#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
int get_eth_env_param(char *env_name)
{
char *env;
- int res = -1;
+ int res = -1;
env = getenv(env_name);
if (env)
@@ -116,12 +63,14 @@ int get_eth_env_param(char *env_name)
int board_eth_init(bd_t *bis)
{
- int j;
- int res;
- char link_type_name[32];
+ int j;
+ int res;
+ int port_num;
+ char link_type_name[32];
+
+ port_num = get_num_eth_ports();
- for (j = 0; j < (sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t));
- j++) {
+ for (j = 0; j < port_num; j++) {
sprintf(link_type_name, "sgmii%d_link_type", j);
res = get_eth_env_param(link_type_name);
if (res >= 0)
@@ -134,32 +83,19 @@ int board_eth_init(bd_t *bis)
}
#endif
-#if defined(CONFIG_BOARD_EARLY_INIT_F)
-int board_early_init_f(void)
-{
- init_plls(ARRAY_SIZE(pll_config), pll_config);
- return 0;
-}
-#endif
-
-int board_init(void)
-{
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
- return 0;
-}
-
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-#define K2_DDR3_START_ADDR 0x80000000
void ft_board_setup(void *blob, bd_t *bd)
{
- u64 start[2];
+ int lpae;
+ char *env;
+ char *endp;
+ int nbanks;
u64 size[2];
- char name[32], *env, *endp;
- int lpae, nodeoffset;
- int unitrd_fixup = 0;
+ u64 start[2];
+ char name[32];
+ int nodeoffset;
u32 ddr3a_size;
- int nbanks;
+ int unitrd_fixup = 0;
env = getenv("mem_lpae");
lpae = env && simple_strtol(env, NULL, 0);
@@ -181,7 +117,7 @@ void ft_board_setup(void *blob, bd_t *bd)
/* adjust memory start address for LPAE */
if (lpae) {
- start[0] -= K2_DDR3_START_ADDR;
+ start[0] -= CONFIG_SYS_SDRAM_BASE;
start[0] += CONFIG_SYS_LPAE_SDRAM_BASE;
}
@@ -208,9 +144,9 @@ void ft_board_setup(void *blob, bd_t *bd)
/* Fix up the initrd */
if (lpae && unitrd_fixup) {
- u64 initrd_start, initrd_end;
- u32 *prop1, *prop2;
int err;
+ u32 *prop1, *prop2;
+ u64 initrd_start, initrd_end;
nodeoffset = fdt_path_offset(blob, "/chosen");
if (nodeoffset >= 0) {
@@ -220,11 +156,11 @@ void ft_board_setup(void *blob, bd_t *bd)
"linux,initrd-end", NULL);
if (prop1 && prop2) {
initrd_start = __be32_to_cpu(*prop1);
- initrd_start -= K2_DDR3_START_ADDR;
+ initrd_start -= CONFIG_SYS_SDRAM_BASE;
initrd_start += CONFIG_SYS_LPAE_SDRAM_BASE;
initrd_start = __cpu_to_be64(initrd_start);
initrd_end = __be32_to_cpu(*prop2);
- initrd_end -= K2_DDR3_START_ADDR;
+ initrd_end -= CONFIG_SYS_SDRAM_BASE;
initrd_end += CONFIG_SYS_LPAE_SDRAM_BASE;
initrd_end = __cpu_to_be64(initrd_end);
@@ -258,9 +194,10 @@ void ft_board_setup(void *blob, bd_t *bd)
void ft_board_setup_ex(void *blob, bd_t *bd)
{
- int lpae;
- char *env;
- u64 *reserve_start, size;
+ int lpae;
+ u64 size;
+ char *env;
+ u64 *reserve_start;
env = getenv("mem_lpae");
lpae = env && simple_strtol(env, NULL, 0);
@@ -277,7 +214,7 @@ void ft_board_setup_ex(void *blob, bd_t *bd)
*reserve_start = __cpu_to_be64(*reserve_start);
size = __cpu_to_be64(*(reserve_start + 1));
if (size) {
- *reserve_start -= K2_DDR3_START_ADDR;
+ *reserve_start -= CONFIG_SYS_SDRAM_BASE;
*reserve_start +=
CONFIG_SYS_LPAE_SDRAM_BASE;
*reserve_start =
diff --git a/board/ti/ks2_evm/board.h b/board/ti/ks2_evm/board.h
new file mode 100644
index 0000000..d91ef73
--- /dev/null
+++ b/board/ti/ks2_evm/board.h
@@ -0,0 +1,19 @@
+/*
+ * K2HK EVM : Board common header
+ *
+ * (C) Copyright 2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _KS2_BOARD
+#define _KS2_BOARD
+
+#include <asm/arch/emac_defs.h>
+
+extern struct eth_priv_t eth_priv_cfg[];
+
+int get_num_eth_ports(void);
+
+#endif
diff --git a/board/ti/ks2_evm/board_k2hk.c b/board/ti/ks2_evm/board_k2hk.c
new file mode 100644
index 0000000..a369d6b
--- /dev/null
+++ b/board/ti/ks2_evm/board_k2hk.c
@@ -0,0 +1,81 @@
+/*
+ * K2HK EVM : Board initialization
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emac_defs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int external_clk[ext_clk_count] = {
+ [sys_clk] = 122880000,
+ [alt_core_clk] = 125000000,
+ [pa_clk] = 122880000,
+ [tetris_clk] = 125000000,
+ [ddr3a_clk] = 100000000,
+ [ddr3b_clk] = 100000000,
+ [mcm_clk] = 312500000,
+ [pcie_clk] = 100000000,
+ [sgmii_srio_clk] = 156250000,
+ [xgmii_clk] = 156250000,
+ [usb_clk] = 100000000,
+ [rp1_clk] = 123456789
+};
+
+static struct pll_init_data pll_config[] = {
+ CORE_PLL_1228,
+ PASS_PLL_983,
+ TETRIS_PLL_1200,
+};
+
+#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
+struct eth_priv_t eth_priv_cfg[] = {
+ {
+ .int_name = "K2HK_EMAC",
+ .rx_flow = 22,
+ .phy_addr = 0,
+ .slave_port = 1,
+ .sgmii_link_type = SGMII_LINK_MAC_PHY,
+ },
+ {
+ .int_name = "K2HK_EMAC1",
+ .rx_flow = 23,
+ .phy_addr = 1,
+ .slave_port = 2,
+ .sgmii_link_type = SGMII_LINK_MAC_PHY,
+ },
+ {
+ .int_name = "K2HK_EMAC2",
+ .rx_flow = 24,
+ .phy_addr = 2,
+ .slave_port = 3,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+ {
+ .int_name = "K2HK_EMAC3",
+ .rx_flow = 25,
+ .phy_addr = 3,
+ .slave_port = 4,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+};
+
+int get_num_eth_ports(void)
+{
+ return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t);
+}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+ init_plls(ARRAY_SIZE(pll_config), pll_config);
+ return 0;
+}
+#endif
diff --git a/board/ti/k2hk_evm/ddr3.c b/board/ti/ks2_evm/ddr3_k2hk.c
similarity index 100%
rename from board/ti/k2hk_evm/ddr3.c
rename to board/ti/ks2_evm/ddr3_k2hk.c
diff --git a/boards.cfg b/boards.cfg
index 5a85fad..e08ccae 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -298,7 +298,7 @@ Active arm armv7 exynos samsung trats
Active arm armv7 exynos samsung trats2 trats2 - Piotr Wilczek <p.wilczek@samsung.com>
Active arm armv7 exynos samsung universal_c210 s5pc210_universal - Przemyslaw Marczak <p.marczak@samsung.com>
Active arm armv7 highbank - highbank highbank - Rob Herring <robh@kernel.org>
-Active arm armv7 keystone ti k2hk_evm k2hk_evm - Vitaly Andrianov <vitalya@ti.com>
+Active arm armv7 keystone ti ks2_evm k2hk_evm - Vitaly Andrianov <vitalya@ti.com>
Active arm armv7 mx5 denx m53evk m53evk m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg Marek Vasut <marek.vasut@gmail.com>
Active arm armv7 mx5 esg ima3-mx53 ima3-mx53 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg -
Active arm armv7 mx5 freescale mx51evk mx51evk mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg Stefano Babic <sbabic@denx.de>
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index bacf3bc..f727882 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -258,6 +258,7 @@
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_SYS_BARGSIZE 1024
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000)
+#define CONFIG_LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
#define CONFIG_SUPPORT_RAW_INITRD
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [U-boot] [Patch 4/6] ARM: keystone: clock: move K2HK SoC dependent code in separate file
2014-07-09 20:44 [U-Boot] [U-boot] [Patch 0/6] Generalize Keystone2 code for other SoC types Ivan Khoronzhuk
` (2 preceding siblings ...)
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 3/6] ARM: keystone2: move K2HK board files to common KS2 board directory Ivan Khoronzhuk
@ 2014-07-09 20:44 ` Ivan Khoronzhuk
2014-07-26 1:27 ` [U-Boot] [U-Boot, U-boot, " Tom Rini
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 5/6] configs: k2hk_evm: config: add common EVM configuration header Ivan Khoronzhuk
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 6/6] keystone: ddr3: move K2HK DDR3 configuration to a common file Ivan Khoronzhuk
5 siblings, 1 reply; 12+ messages in thread
From: Ivan Khoronzhuk @ 2014-07-09 20:44 UTC (permalink / raw)
To: u-boot
This patch in general spit SoC type clock dependent code and general
clock code. Before adding keystone II Edison k2e SoC which has
slightly different dpll set, move k2hk dependent clock code to
separate clock-k2hk.c file.
Acked-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
arch/arm/cpu/armv7/keystone/Makefile | 1 +
arch/arm/cpu/armv7/keystone/clock-k2hk.c | 113 ++++++++++++++++++
arch/arm/cpu/armv7/keystone/clock.c | 148 ++++--------------------
arch/arm/include/asm/arch-keystone/clock-k2hk.h | 21 ----
arch/arm/include/asm/arch-keystone/clock.h | 28 +++++
5 files changed, 166 insertions(+), 145 deletions(-)
create mode 100644 arch/arm/cpu/armv7/keystone/clock-k2hk.c
diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/cpu/armv7/keystone/Makefile
index 64e42a6..74c5160 100644
--- a/arch/arm/cpu/armv7/keystone/Makefile
+++ b/arch/arm/cpu/armv7/keystone/Makefile
@@ -8,6 +8,7 @@
obj-y += init.o
obj-y += psc.o
obj-y += clock.o
+obj-$(CONFIG_SOC_K2HK) += clock-k2hk.o
obj-y += cmd_clock.o
obj-y += cmd_mon.o
obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_nav.o
diff --git a/arch/arm/cpu/armv7/keystone/clock-k2hk.c b/arch/arm/cpu/armv7/keystone/clock-k2hk.c
new file mode 100644
index 0000000..96a9f72
--- /dev/null
+++ b/arch/arm/cpu/armv7/keystone/clock-k2hk.c
@@ -0,0 +1,113 @@
+/*
+ * Keystone2: get clk rate for K2HK
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clock_defs.h>
+
+const struct keystone_pll_regs keystone_pll_regs[] = {
+ [CORE_PLL] = {KS2_MAINPLLCTL0, KS2_MAINPLLCTL1},
+ [PASS_PLL] = {KS2_PASSPLLCTL0, KS2_PASSPLLCTL1},
+ [TETRIS_PLL] = {KS2_ARMPLLCTL0, KS2_ARMPLLCTL1},
+ [DDR3A_PLL] = {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1},
+ [DDR3B_PLL] = {KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1},
+};
+
+/**
+ * pll_freq_get - get pll frequency
+ * Fout = Fref * NF(mult) / NR(prediv) / OD
+ * @pll: pll identifier
+ */
+static unsigned long pll_freq_get(int pll)
+{
+ unsigned long mult = 1, prediv = 1, output_div = 2;
+ unsigned long ret;
+ u32 tmp, reg;
+
+ if (pll == CORE_PLL) {
+ ret = external_clk[sys_clk];
+ if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) {
+ /* PLL mode */
+ tmp = __raw_readl(KS2_MAINPLLCTL0);
+ prediv = (tmp & PLL_DIV_MASK) + 1;
+ mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) |
+ (pllctl_reg_read(pll, mult) &
+ PLLM_MULT_LO_MASK)) + 1;
+ output_div = ((pllctl_reg_read(pll, secctl) >>
+ PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1;
+
+ ret = ret / prediv / output_div * mult;
+ }
+ } else {
+ switch (pll) {
+ case PASS_PLL:
+ ret = external_clk[pa_clk];
+ reg = KS2_PASSPLLCTL0;
+ break;
+ case TETRIS_PLL:
+ ret = external_clk[tetris_clk];
+ reg = KS2_ARMPLLCTL0;
+ break;
+ case DDR3A_PLL:
+ ret = external_clk[ddr3a_clk];
+ reg = KS2_DDR3APLLCTL0;
+ break;
+ case DDR3B_PLL:
+ ret = external_clk[ddr3b_clk];
+ reg = KS2_DDR3BPLLCTL0;
+ break;
+ default:
+ return 0;
+ }
+
+ tmp = __raw_readl(reg);
+
+ if (!(tmp & PLLCTL_BYPASS)) {
+ /* Bypass disabled */
+ prediv = (tmp & PLL_DIV_MASK) + 1;
+ mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1;
+ output_div = ((tmp >> PLL_CLKOD_SHIFT) &
+ PLL_CLKOD_MASK) + 1;
+ ret = ((ret / prediv) * mult) / output_div;
+ }
+ }
+
+ return ret;
+}
+
+unsigned long clk_get_rate(unsigned int clk)
+{
+ switch (clk) {
+ case core_pll_clk: return pll_freq_get(CORE_PLL);
+ case pass_pll_clk: return pll_freq_get(PASS_PLL);
+ case tetris_pll_clk: return pll_freq_get(TETRIS_PLL);
+ case ddr3a_pll_clk: return pll_freq_get(DDR3A_PLL);
+ case ddr3b_pll_clk: return pll_freq_get(DDR3B_PLL);
+ case sys_clk0_1_clk:
+ case sys_clk0_clk: return pll_freq_get(CORE_PLL) / pll0div_read(1);
+ case sys_clk1_clk: return pll_freq_get(CORE_PLL) / pll0div_read(2);
+ case sys_clk2_clk: return pll_freq_get(CORE_PLL) / pll0div_read(3);
+ case sys_clk3_clk: return pll_freq_get(CORE_PLL) / pll0div_read(4);
+ case sys_clk0_2_clk: return clk_get_rate(sys_clk0_clk) / 2;
+ case sys_clk0_3_clk: return clk_get_rate(sys_clk0_clk) / 3;
+ case sys_clk0_4_clk: return clk_get_rate(sys_clk0_clk) / 4;
+ case sys_clk0_6_clk: return clk_get_rate(sys_clk0_clk) / 6;
+ case sys_clk0_8_clk: return clk_get_rate(sys_clk0_clk) / 8;
+ case sys_clk0_12_clk: return clk_get_rate(sys_clk0_clk) / 12;
+ case sys_clk0_24_clk: return clk_get_rate(sys_clk0_clk) / 24;
+ case sys_clk1_3_clk: return clk_get_rate(sys_clk1_clk) / 3;
+ case sys_clk1_4_clk: return clk_get_rate(sys_clk1_clk) / 4;
+ case sys_clk1_6_clk: return clk_get_rate(sys_clk1_clk) / 6;
+ case sys_clk1_12_clk: return clk_get_rate(sys_clk1_clk) / 12;
+ default:
+ break;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c
index f905fdc..42b664b 100644
--- a/arch/arm/cpu/armv7/keystone/clock.c
+++ b/arch/arm/cpu/armv7/keystone/clock.c
@@ -8,9 +8,6 @@
*/
#include <common.h>
-#include <asm-generic/errno.h>
-#include <asm/io.h>
-#include <asm/processor.h>
#include <asm/arch/clock.h>
#include <asm/arch/clock_defs.h>
@@ -24,106 +21,6 @@ static void wait_for_completion(const struct pll_init_data *data)
}
}
-struct pll_regs {
- u32 reg0, reg1;
-};
-
-static const struct pll_regs pll_regs[] = {
- [CORE_PLL] = { KS2_MAINPLLCTL0, KS2_MAINPLLCTL1},
- [PASS_PLL] = { KS2_PASSPLLCTL0, KS2_PASSPLLCTL1},
- [TETRIS_PLL] = { KS2_ARMPLLCTL0, KS2_ARMPLLCTL1},
- [DDR3A_PLL] = { KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1},
- [DDR3B_PLL] = { KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1},
-};
-
-/* Fout = Fref * NF(mult) / NR(prediv) / OD */
-static unsigned long pll_freq_get(int pll)
-{
- unsigned long mult = 1, prediv = 1, output_div = 2;
- unsigned long ret;
- u32 tmp, reg;
-
- if (pll == CORE_PLL) {
- ret = external_clk[sys_clk];
- if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) {
- /* PLL mode */
- tmp = __raw_readl(KS2_MAINPLLCTL0);
- prediv = (tmp & PLL_DIV_MASK) + 1;
- mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) |
- (pllctl_reg_read(pll, mult) &
- PLLM_MULT_LO_MASK)) + 1;
- output_div = ((pllctl_reg_read(pll, secctl) >>
- PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1;
-
- ret = ret / prediv / output_div * mult;
- }
- } else {
- switch (pll) {
- case PASS_PLL:
- ret = external_clk[pa_clk];
- reg = KS2_PASSPLLCTL0;
- break;
- case TETRIS_PLL:
- ret = external_clk[tetris_clk];
- reg = KS2_ARMPLLCTL0;
- break;
- case DDR3A_PLL:
- ret = external_clk[ddr3a_clk];
- reg = KS2_DDR3APLLCTL0;
- break;
- case DDR3B_PLL:
- ret = external_clk[ddr3b_clk];
- reg = KS2_DDR3BPLLCTL0;
- break;
- default:
- return 0;
- }
-
- tmp = __raw_readl(reg);
-
- if (!(tmp & PLLCTL_BYPASS)) {
- /* Bypass disabled */
- prediv = (tmp & PLL_DIV_MASK) + 1;
- mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1;
- output_div = ((tmp >> PLL_CLKOD_SHIFT) &
- PLL_CLKOD_MASK) + 1;
- ret = ((ret / prediv) * mult) / output_div;
- }
- }
-
- return ret;
-}
-
-unsigned long clk_get_rate(unsigned int clk)
-{
- switch (clk) {
- case core_pll_clk: return pll_freq_get(CORE_PLL);
- case pass_pll_clk: return pll_freq_get(PASS_PLL);
- case tetris_pll_clk: return pll_freq_get(TETRIS_PLL);
- case ddr3a_pll_clk: return pll_freq_get(DDR3A_PLL);
- case ddr3b_pll_clk: return pll_freq_get(DDR3B_PLL);
- case sys_clk0_1_clk:
- case sys_clk0_clk: return pll_freq_get(CORE_PLL) / pll0div_read(1);
- case sys_clk1_clk: return pll_freq_get(CORE_PLL) / pll0div_read(2);
- case sys_clk2_clk: return pll_freq_get(CORE_PLL) / pll0div_read(3);
- case sys_clk3_clk: return pll_freq_get(CORE_PLL) / pll0div_read(4);
- case sys_clk0_2_clk: return clk_get_rate(sys_clk0_clk) / 2;
- case sys_clk0_3_clk: return clk_get_rate(sys_clk0_clk) / 3;
- case sys_clk0_4_clk: return clk_get_rate(sys_clk0_clk) / 4;
- case sys_clk0_6_clk: return clk_get_rate(sys_clk0_clk) / 6;
- case sys_clk0_8_clk: return clk_get_rate(sys_clk0_clk) / 8;
- case sys_clk0_12_clk: return clk_get_rate(sys_clk0_clk) / 12;
- case sys_clk0_24_clk: return clk_get_rate(sys_clk0_clk) / 24;
- case sys_clk1_3_clk: return clk_get_rate(sys_clk1_clk) / 3;
- case sys_clk1_4_clk: return clk_get_rate(sys_clk1_clk) / 4;
- case sys_clk1_6_clk: return clk_get_rate(sys_clk1_clk) / 6;
- case sys_clk1_12_clk: return clk_get_rate(sys_clk1_clk) / 12;
- default:
- break;
- }
- return 0;
-}
-
void init_pll(const struct pll_init_data *data)
{
u32 tmp, tmp_ctl, pllm, plld, pllod, bwadj;
@@ -139,7 +36,7 @@ void init_pll(const struct pll_init_data *data)
tmp = pllctl_reg_read(data->pll, secctl);
if (tmp & (PLLCTL_BYPASS)) {
- setbits_le32(pll_regs[data->pll].reg1,
+ setbits_le32(keystone_pll_regs[data->pll].reg1,
BIT(MAIN_ENSAT_OFFSET));
pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN |
@@ -159,21 +56,24 @@ void init_pll(const struct pll_init_data *data)
pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK);
- clrsetbits_le32(pll_regs[data->pll].reg0, PLLM_MULT_HI_SMASK,
- (pllm << 6));
+ clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+ PLLM_MULT_HI_SMASK, (pllm << 6));
/* Set the BWADJ (12 bit field) */
tmp_ctl = pllm >> 1; /* Divide the pllm by 2 */
- clrsetbits_le32(pll_regs[data->pll].reg0, PLL_BWADJ_LO_SMASK,
+ clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+ PLL_BWADJ_LO_SMASK,
(tmp_ctl << PLL_BWADJ_LO_SHIFT));
- clrsetbits_le32(pll_regs[data->pll].reg1, PLL_BWADJ_HI_MASK,
+ clrsetbits_le32(keystone_pll_regs[data->pll].reg1,
+ PLL_BWADJ_HI_MASK,
(tmp_ctl >> 8));
/*
* Set the pll divider (6 bit field) *
* PLLD[5:0] is located in MAINPLLCTL0
*/
- clrsetbits_le32(pll_regs[data->pll].reg0, PLL_DIV_MASK, plld);
+ clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+ PLL_DIV_MASK, plld);
/* Set the OUTPUT DIVIDE (4 bit field) in SECCTL */
pllctl_reg_rmw(data->pll, secctl, PLL_CLKOD_SMASK,
@@ -209,14 +109,14 @@ void init_pll(const struct pll_init_data *data)
} else if (data->pll == TETRIS_PLL) {
bwadj = pllm >> 1;
/* 1.5 Set PLLCTL0[BYPASS] =1 (enable bypass), */
- setbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS);
+ setbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS);
/*
* Set CHIPMISCCTL1[13] = 0 (enable glitchfree bypass)
* only applicable for Kepler
*/
clrbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN);
/* 2 In PLLCTL1, write PLLRST = 1 (PLL is reset) */
- setbits_le32(pll_regs[data->pll].reg1 ,
+ setbits_le32(keystone_pll_regs[data->pll].reg1 ,
PLL_PLLRST | PLLCTL_ENSAT);
/*
@@ -229,13 +129,13 @@ void init_pll(const struct pll_init_data *data)
(pllm << 6) |
(plld & PLL_DIV_MASK) |
(pllod << PLL_CLKOD_SHIFT) | PLLCTL_BYPASS;
- __raw_writel(tmp, pll_regs[data->pll].reg0);
+ __raw_writel(tmp, keystone_pll_regs[data->pll].reg0);
/* Set BWADJ[11:8] bits */
- tmp = __raw_readl(pll_regs[data->pll].reg1);
+ tmp = __raw_readl(keystone_pll_regs[data->pll].reg1);
tmp &= ~(PLL_BWADJ_HI_MASK);
tmp |= ((bwadj>>8) & PLL_BWADJ_HI_MASK);
- __raw_writel(tmp, pll_regs[data->pll].reg1);
+ __raw_writel(tmp, keystone_pll_regs[data->pll].reg1);
/*
* 5 Wait for at least 5 us based on the reference
* clock (PLL reset time)
@@ -243,26 +143,26 @@ void init_pll(const struct pll_init_data *data)
sdelay(21000); /* Wait for a minimum of 7 us*/
/* 6 In PLLCTL1, write PLLRST = 0 (PLL reset is released) */
- clrbits_le32(pll_regs[data->pll].reg1, PLL_PLLRST);
+ clrbits_le32(keystone_pll_regs[data->pll].reg1, PLL_PLLRST);
/*
* 7 Wait for at least 500 * REFCLK cycles * (PLLD + 1)
* (PLL lock time)
*/
sdelay(105000);
/* 8 disable bypass */
- clrbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS);
+ clrbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS);
/*
* 9 Set CHIPMISCCTL1[13] = 1 (disable glitchfree bypass)
* only applicable for Kepler
*/
setbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN);
} else {
- setbits_le32(pll_regs[data->pll].reg1, PLLCTL_ENSAT);
+ setbits_le32(keystone_pll_regs[data->pll].reg1, PLLCTL_ENSAT);
/*
* process keeps state of Bypass bit while programming
* all other DDR PLL settings
*/
- tmp = __raw_readl(pll_regs[data->pll].reg0);
+ tmp = __raw_readl(keystone_pll_regs[data->pll].reg0);
tmp &= PLLCTL_BYPASS; /* clear everything except Bypass */
/*
@@ -274,10 +174,10 @@ void init_pll(const struct pll_init_data *data)
(pllm << PLL_MULT_SHIFT) |
(plld & PLL_DIV_MASK) |
(pllod << PLL_CLKOD_SHIFT);
- __raw_writel(tmp, pll_regs[data->pll].reg0);
+ __raw_writel(tmp, keystone_pll_regs[data->pll].reg0);
/* Set BWADJ[11:8] bits */
- tmp = __raw_readl(pll_regs[data->pll].reg1);
+ tmp = __raw_readl(keystone_pll_regs[data->pll].reg1);
tmp &= ~(PLL_BWADJ_HI_MASK);
tmp |= ((bwadj >> 8) & PLL_BWADJ_HI_MASK);
@@ -285,20 +185,20 @@ void init_pll(const struct pll_init_data *data)
if (data->pll == PASS_PLL)
tmp |= PLLCTL_PAPLL;
- __raw_writel(tmp, pll_regs[data->pll].reg1);
+ __raw_writel(tmp, keystone_pll_regs[data->pll].reg1);
/* Reset bit: bit 14 for both DDR3 & PASS PLL */
tmp = PLL_PLLRST;
/* Set RESET bit = 1 */
- setbits_le32(pll_regs[data->pll].reg1, tmp);
+ setbits_le32(keystone_pll_regs[data->pll].reg1, tmp);
/* Wait for a minimum of 7 us*/
sdelay(21000);
/* Clear RESET bit */
- clrbits_le32(pll_regs[data->pll].reg1, tmp);
+ clrbits_le32(keystone_pll_regs[data->pll].reg1, tmp);
sdelay(105000);
/* clear BYPASS (Enable PLL Mode) */
- clrbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS);
+ clrbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS);
sdelay(21000); /* Wait for a minimum of 7 us*/
}
diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/include/asm/arch-keystone/clock-k2hk.h
index ed1225c..784a0be 100644
--- a/arch/arm/include/asm/arch-keystone/clock-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/clock-k2hk.h
@@ -10,10 +10,6 @@
#ifndef __ASM_ARCH_CLOCK_K2HK_H
#define __ASM_ARCH_CLOCK_K2HK_H
-#include <asm/arch/hardware.h>
-
-#ifndef __ASSEMBLY__
-
enum ext_clk_e {
sys_clk,
alt_core_clk,
@@ -66,15 +62,6 @@ enum pll_type_e {
DDR3A_PLL,
DDR3B_PLL,
};
-#define MAIN_PLL CORE_PLL
-
-/* PLL configuration data */
-struct pll_init_data {
- int pll;
- int pll_m; /* PLL Multiplier */
- int pll_d; /* PLL divider */
- int pll_od; /* PLL output divider */
-};
#define CORE_PLL_799 {CORE_PLL, 13, 1, 2}
#define CORE_PLL_983 {CORE_PLL, 16, 1, 2}
@@ -98,12 +85,4 @@ struct pll_init_data {
#define DDR3_PLL_800(x) {DDR3##x##_PLL, 16, 1, 2}
#define DDR3_PLL_333(x) {DDR3##x##_PLL, 20, 1, 6}
-void init_plls(int num_pll, struct pll_init_data *config);
-void init_pll(const struct pll_init_data *data);
-unsigned long clk_get_rate(unsigned int clk);
-unsigned long clk_round_rate(unsigned int clk, unsigned long hz);
-int clk_set_rate(unsigned int clk, unsigned long hz);
-
-#endif
-
#endif
diff --git a/arch/arm/include/asm/arch-keystone/clock.h b/arch/arm/include/asm/arch-keystone/clock.h
index 324501b..c7da352 100644
--- a/arch/arm/include/asm/arch-keystone/clock.h
+++ b/arch/arm/include/asm/arch-keystone/clock.h
@@ -10,8 +10,36 @@
#ifndef __ASM_ARCH_CLOCK_H
#define __ASM_ARCH_CLOCK_H
+#ifndef __ASSEMBLY__
+
#ifdef CONFIG_SOC_K2HK
#include <asm/arch/clock-k2hk.h>
#endif
+#define MAIN_PLL CORE_PLL
+
+#include <asm/types.h>
+
+struct keystone_pll_regs {
+ u32 reg0;
+ u32 reg1;
+};
+
+/* PLL configuration data */
+struct pll_init_data {
+ int pll;
+ int pll_m; /* PLL Multiplier */
+ int pll_d; /* PLL divider */
+ int pll_od; /* PLL output divider */
+};
+
+extern const struct keystone_pll_regs keystone_pll_regs[];
+
+void init_plls(int num_pll, struct pll_init_data *config);
+void init_pll(const struct pll_init_data *data);
+unsigned long clk_get_rate(unsigned int clk);
+unsigned long clk_round_rate(unsigned int clk, unsigned long hz);
+int clk_set_rate(unsigned int clk, unsigned long hz);
+
+#endif
#endif
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [U-boot] [Patch 5/6] configs: k2hk_evm: config: add common EVM configuration header
2014-07-09 20:44 [U-Boot] [U-boot] [Patch 0/6] Generalize Keystone2 code for other SoC types Ivan Khoronzhuk
` (3 preceding siblings ...)
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 4/6] ARM: keystone: clock: move K2HK SoC dependent code in separate file Ivan Khoronzhuk
@ 2014-07-09 20:44 ` Ivan Khoronzhuk
2014-07-26 1:27 ` [U-Boot] [U-Boot, U-boot, " Tom Rini
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 6/6] keystone: ddr3: move K2HK DDR3 configuration to a common file Ivan Khoronzhuk
5 siblings, 1 reply; 12+ messages in thread
From: Ivan Khoronzhuk @ 2014-07-09 20:44 UTC (permalink / raw)
To: u-boot
From: Hao Zhang <hzhang@ti.com>
This patch adds a common config header file for all the Keystone II
EVM platforms. It combines a lot of general definitions in one file.
The common header included in the EVM should be specific configuration
header.
Acked-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
include/configs/k2hk_evm.h | 258 +++---------------------------------------
include/configs/ks2_evm.h | 275 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 289 insertions(+), 244 deletions(-)
create mode 100644 include/configs/ks2_evm.h
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index f727882..8aa616d 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -14,257 +14,27 @@
#define CONFIG_SOC_K2HK
#define CONFIG_K2HK_EVM
-/* U-Boot Build Configuration */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */
-#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SYS_THUMB_BUILD
-
-/* SoC Configuration */
-#define CONFIG_ARMV7
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_ARCH_TIMER
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_TEXT_BASE 0x0c001000
-#define CONFIG_SPL_TARGET "u-boot-spi.gph"
-#define CONFIG_SYS_DCACHE_OFF
-
-/* Memory Configuration */
-#define CONFIG_NR_DRAM_BANKS 2
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000
-#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */
-#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */
-#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \
- GENERATED_GBL_DATA_SIZE)
-
-/* SPL SPI Loader Configuration */
-#define CONFIG_SPL_TEXT_BASE 0x0c200000
-#define CONFIG_SPL_PAD_TO 65536
-#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8)
-#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \
- CONFIG_SPL_MAX_SIZE)
-#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024)
-#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
- CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024)
-#define CONFIG_SPL_STACK_SIZE (8 * 1024)
-#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \
- CONFIG_SYS_SPL_MALLOC_SIZE + \
- CONFIG_SPL_STACK_SIZE - 4)
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_BUS 0
-#define CONFIG_SPL_SPI_CS 0
-#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO
-#define CONFIG_SPL_FRAMEWORK
-
-/* UART Configuration */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_MEM32
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE
-#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE
-#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6)
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/* SPI Configuration */
-#define CONFIG_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_DAVINCI_SPI
-#define CONFIG_SYS_SPI0
-#define CONFIG_SYS_SPI_BASE KS2_SPI_BASE
-#define CONFIG_SYS_SPI0_NUM_CS 4
-#define CONFIG_SYS_SPI1
-#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE
-#define CONFIG_SYS_SPI1_NUM_CS 4
-#define CONFIG_SYS_SPI2
-#define CONFIG_SYS_SPI2_NUM_CS 4
-#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE
-#define CONFIG_CMD_SPI
-#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_LPSC_EMIF25_SPI)
-#define CONFIG_SF_DEFAULT_SPEED 30000000
-#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+/* U-Boot general configuration */
+#define CONFIG_SYS_PROMPT "K2HK EVM # "
-/* I2C Configuration */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */
-#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */
-#define I2C_BUS_MAX 3
+#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\
+ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0"
-/* EEPROM definitions */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define KS2_FDT_NAME "name_fdt=k2hk-evm.dtb\0"
+#define KS2_ADDR_MON "addr_mon=0x0c5f0000\0"
+#define KS2_NAME_MON "name_mon=skern-k2hk-evm.bin\0"
+#define NAME_UBOOT "name_uboot=u-boot-spi-k2hk-evm.gph\0"
+#define NAME_UBI "name_ubi=k2hk-evm-ubifs.ubi\0"
-/* Network Configuration */
-#define CONFIG_DRIVER_TI_KEYSTONE_NET
-#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT 32
-#define CONFIG_NET_MULTI
-#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5
-#define CONFIG_SYS_SGMII_REFCLK_MHZ 312
-#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250
-#define CONFIG_SYS_SGMII_RATESCALE 2
+#include <configs/ks2_evm.h>
-/* AEMIF */
-#define CONFIG_TI_AEMIF
-#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE
+/* SPL SPI Loader Configuration */
+#define CONFIG_SPL_TEXT_BASE 0x0c200000
/* NAND Configuration */
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_KEYSTONE_RBL_NAND
-#define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE CONFIG_ENV_OFFSET
-#define CONFIG_SYS_NAND_CS 2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
#define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_NAND_MASK_CLE 0x4000
-#define CONFIG_SYS_NAND_MASK_ALE 0x2000
-
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, }
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_MAX_CHIPS 1
-#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
-#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x100000
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \
- "1024k(bootloader)ro,512k(params)ro," \
- "-(ubifs)"
-/* U-Boot command configuration */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_EEPROM
-
-/* U-Boot general configuration */
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SYS_PROMPT "K2HK EVM # "
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_PBSIZE 2048
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_TIMESTAMP
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "boot=ramfs\0" \
- "tftp_root=/\0" \
- "nfs_root=/export\0" \
- "mem_lpae=1\0" \
- "mem_reserve=512M\0" \
- "addr_fdt=0x87000000\0" \
- "addr_kern=0x88000000\0" \
- "addr_mon=0x0c5f0000\0" \
- "addr_uboot=0x87000000\0" \
- "addr_fs=0x82000000\0" \
- "addr_ubi=0x82000000\0" \
- "fdt_high=0xffffffff\0" \
- "name_fdt=uImage-k2hk-evm.dtb\0" \
- "name_fs=arago-console-image.cpio.gz\0" \
- "name_kern=uImage-keystone-evm.bin\0" \
- "name_mon=skern-keystone-evm.bin\0" \
- "name_uboot=u-boot-spi-keystone-evm.gph\0" \
- "name_ubi=keystone-evm-ubifs.ubi\0" \
- "run_mon=mon_install ${addr_mon}\0" \
- "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \
- "init_net=run args_all args_net\0" \
- "init_ubi=run args_all args_ubi; " \
- "ubi part ubifs; ubifsmount boot\0" \
- "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
- "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \
- "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
- "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \
- "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
- "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \
- "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \
- "burn_uboot_spi=sf probe; sf erase 0 0x100000; " \
- "sf write ${addr_uboot} 0 ${filesize}\0" \
- "burn_uboot_nand=nand erase 0 0x100000; " \
- "nand write ${addr_uboot} 0 ${filesize}\0" \
- "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \
- "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
- "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \
- "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \
- "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
- "${nfs_options} ip=dhcp\0" \
- "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \
- "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
- "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
- "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
- "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \
- "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \
- "burn_ubi=nand erase.part ubifs; " \
- "nand write ${addr_ubi} ubifs ${filesize}\0" \
- "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \
- "args_ramfs=setenv bootargs ${bootargs} earlyprintk " \
- "rdinit=/sbin/init rw root=/dev/ram0 " \
- "initrd=0x802000000,9M\0" \
- "no_post=1\0" \
- "mtdparts=mtdparts=davinci_nand.0:" \
- "1024k(bootloader)ro,512k(params)ro,522752k(ubifs)\0"
-#define CONFIG_BOOTCOMMAND \
- "run init_${boot} get_fdt_${boot} get_mon_${boot} " \
- "get_kern_${boot} run_mon run_kern"
-#define CONFIG_BOOTARGS \
-
-/* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_SYS_BARGSIZE 1024
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000)
-#define CONFIG_LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
-
-#define CONFIG_SUPPORT_RAW_INITRD
-
-/* we may include files below only after all above definitions */
-#include <asm/arch/hardware.h>
-#include <asm/arch/clock.h>
-#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6)
+/* Network */
+#define CONFIG_DRIVER_TI_KEYSTONE_NET
#endif /* __CONFIG_K2HK_EVM_H */
diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h
new file mode 100644
index 0000000..29f0b9b
--- /dev/null
+++ b/include/configs/ks2_evm.h
@@ -0,0 +1,275 @@
+/*
+ * Common configuration header file for all Keystone II EVM platforms
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_KS2_EVM_H
+#define __CONFIG_KS2_EVM_H
+
+#define CONFIG_SOC_KEYSTONE
+
+/* U-Boot Build Configuration */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */
+#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SYS_THUMB_BUILD
+
+/* SoC Configuration */
+#define CONFIG_ARMV7
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_ARCH_TIMER
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x0c001000
+#define CONFIG_SPL_TARGET "u-boot-spi.gph"
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Memory Configuration */
+#define CONFIG_NR_DRAM_BANKS 2
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000
+#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */
+#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */
+#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \
+ GENERATED_GBL_DATA_SIZE)
+
+/* SPL SPI Loader Configuration */
+#define CONFIG_SPL_PAD_TO 65536
+#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8)
+#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \
+ CONFIG_SPL_MAX_SIZE)
+#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024)
+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
+ CONFIG_SPL_BSS_MAX_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024)
+#define CONFIG_SPL_STACK_SIZE (8 * 1024)
+#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \
+ CONFIG_SYS_SPL_MALLOC_SIZE + \
+ CONFIG_SPL_STACK_SIZE - 4)
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS 0
+#define CONFIG_SPL_SPI_CS 0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO
+#define CONFIG_SPL_FRAMEWORK
+
+/* UART Configuration */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_MEM32
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE
+#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE
+#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6)
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* SPI Configuration */
+#define CONFIG_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_DAVINCI_SPI
+#define CONFIG_CMD_SPI
+#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_LPSC_EMIF25_SPI)
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_SYS_SPI0
+#define CONFIG_SYS_SPI_BASE KS2_SPI0_BASE
+#define CONFIG_SYS_SPI0_NUM_CS 4
+#define CONFIG_SYS_SPI1
+#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE
+#define CONFIG_SYS_SPI1_NUM_CS 4
+#define CONFIG_SYS_SPI2
+#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE
+#define CONFIG_SYS_SPI2_NUM_CS 4
+
+/* Network Configuration */
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 32
+#define CONFIG_NET_MULTI
+#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5
+#define CONFIG_SYS_SGMII_REFCLK_MHZ 312
+#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250
+#define CONFIG_SYS_SGMII_RATESCALE 2
+
+/* AEMIF */
+#define CONFIG_TI_AEMIF
+#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE
+
+/* I2C Configuration */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DAVINCI
+#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
+#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */
+#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */
+#define I2C_BUS_MAX 3
+
+/* EEPROM definitions */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+
+/* NAND Configuration */
+#define CONFIG_NAND_DAVINCI
+#define CONFIG_KEYSTONE_RBL_NAND
+#define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE CONFIG_ENV_OFFSET
+#define CONFIG_SYS_NAND_MASK_CLE 0x4000
+#define CONFIG_SYS_NAND_MASK_ALE 0x2000
+#define CONFIG_SYS_NAND_CS 2
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
+
+#define CONFIG_SYS_NAND_LARGEPAGE
+#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_MAX_CHIPS 1
+#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \
+ "1024k(bootloader)ro,512k(params)ro," \
+ "-(ubifs)"
+
+/* U-Boot command configuration */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_EEPROM
+
+/* U-Boot general configuration */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_PBSIZE 2048
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_TIMESTAMP
+
+/* EDMA3 */
+#define CONFIG_TI_EDMA3
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "boot=ramfs\0" \
+ "tftp_root=/\0" \
+ "nfs_root=/export\0" \
+ "mem_lpae=1\0" \
+ "mem_reserve=512M\0" \
+ "addr_fdt=0x87000000\0" \
+ "addr_kern=0x88000000\0" \
+ KS2_ADDR_MON \
+ "addr_uboot=0x87000000\0" \
+ "addr_fs=0x82000000\0" \
+ "addr_ubi=0x82000000\0" \
+ "addr_secdb_key=0xc000000\0" \
+ "fdt_high=0xffffffff\0" \
+ KS2_FDT_NAME \
+ "name_fs=arago-console-image.cpio.gz\0" \
+ "name_kern=uImage\0" \
+ KS2_NAME_MON \
+ NAME_UBOOT \
+ NAME_UBI \
+ "run_mon=mon_install ${addr_mon}\0" \
+ "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \
+ "init_net=run args_all args_net\0" \
+ "init_ubi=run args_all args_ubi; " \
+ "ubi part ubifs; ubifsmount boot;" \
+ "ubifsload ${addr_secdb_key} securedb.key.bin;\0" \
+ "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
+ "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \
+ "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
+ "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \
+ "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
+ "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \
+ "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \
+ "burn_uboot_spi=sf probe; sf erase 0 0x100000; " \
+ "sf write ${addr_uboot} 0 ${filesize}\0" \
+ "burn_uboot_nand=nand erase 0 0x100000; " \
+ "nand write ${addr_uboot} 0 ${filesize}\0" \
+ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \
+ KS2_ARGS_UBI \
+ "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \
+ "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
+ "${nfs_options} ip=dhcp\0" \
+ "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \
+ "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
+ "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
+ "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
+ "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \
+ "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \
+ "burn_ubi=nand erase.part ubifs; " \
+ "nand write ${addr_ubi} ubifs ${filesize}\0" \
+ "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \
+ "args_ramfs=setenv bootargs ${bootargs} " \
+ "rdinit=/sbin/init rw root=/dev/ram0 " \
+ "initrd=0x802000000,9M\0" \
+ "no_post=1\0" \
+ "mtdparts=mtdparts=davinci_nand.0:" \
+ "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "run init_${boot} get_fdt_${boot} get_mon_${boot} " \
+ "get_kern_${boot} run_mon run_kern"
+
+#define CONFIG_BOOTARGS \
+
+/* Linux interfacing */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_SYS_BARGSIZE 1024
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000)
+#define CONFIG_LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+/* we may include files below only after all above definitions */
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6)
+
+/* Maximum memory size for relocated U-boot at the end of the DDR3 memory
+ which is NOT applicable for DDR ECC test */
+#define CONFIG_MAX_UBOOT_MEM_SIZE (4 << 20) /* 4 MiB */
+
+#endif /* __CONFIG_KS2_EVM_H */
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [U-boot] [Patch 6/6] keystone: ddr3: move K2HK DDR3 configuration to a common file
2014-07-09 20:44 [U-Boot] [U-boot] [Patch 0/6] Generalize Keystone2 code for other SoC types Ivan Khoronzhuk
` (4 preceding siblings ...)
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 5/6] configs: k2hk_evm: config: add common EVM configuration header Ivan Khoronzhuk
@ 2014-07-09 20:44 ` Ivan Khoronzhuk
2014-07-26 1:27 ` [U-Boot] [U-Boot, U-boot, " Tom Rini
5 siblings, 1 reply; 12+ messages in thread
From: Ivan Khoronzhuk @ 2014-07-09 20:44 UTC (permalink / raw)
To: u-boot
From: Hao Zhang <hzhang@ti.com>
It's convenient to hold configurations for DDR3 PHY and EMIF in
separate common place. This patch moves K2HK DDR3 PHY and EMIF
configuration data with different rates and memory size to a common
ddr3_cfg.c file.
Acked-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
---
board/ti/ks2_evm/Makefile | 1 +
board/ti/ks2_evm/ddr3_cfg.c | 130 ++++++++++++++++++
board/ti/ks2_evm/ddr3_cfg.h | 21 +++
board/ti/ks2_evm/ddr3_k2hk.c | 305 +++----------------------------------------
4 files changed, 172 insertions(+), 285 deletions(-)
create mode 100644 board/ti/ks2_evm/ddr3_cfg.c
create mode 100644 board/ti/ks2_evm/ddr3_cfg.h
diff --git a/board/ti/ks2_evm/Makefile b/board/ti/ks2_evm/Makefile
index 58d77dc..774a7d5 100644
--- a/board/ti/ks2_evm/Makefile
+++ b/board/ti/ks2_evm/Makefile
@@ -6,5 +6,6 @@
#
obj-y += board.o
+obj-y += ddr3_cfg.o
obj-$(CONFIG_K2HK_EVM) += board_k2hk.o
obj-$(CONFIG_K2HK_EVM) += ddr3_k2hk.o
diff --git a/board/ti/ks2_evm/ddr3_cfg.c b/board/ti/ks2_evm/ddr3_cfg.c
new file mode 100644
index 0000000..6e55af9
--- /dev/null
+++ b/board/ti/ks2_evm/ddr3_cfg.c
@@ -0,0 +1,130 @@
+/*
+ * Keystone2: DDR3 configuration
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <i2c.h>
+#include <asm/arch/ddr3.h>
+#include <asm/arch/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* DDR3 PHY configuration data with 1600M rate, 8GB size */
+struct ddr3_phy_config ddr3phy_1600_8g = {
+ .pllcr = 0x0001C000ul,
+ .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
+ .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
+ .ptr0 = 0x42C21590ul,
+ .ptr1 = 0xD05612C0ul,
+ .ptr2 = 0, /* not set in gel */
+ .ptr3 = 0x0D861A80ul,
+ .ptr4 = 0x0C827100ul,
+ .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
+ .dcr_val = ((1 << 10)),
+ .dtpr0 = 0xA19DBB66ul,
+ .dtpr1 = 0x32868300ul,
+ .dtpr2 = 0x50035200ul,
+ .mr0 = 0x00001C70ul,
+ .mr1 = 0x00000006ul,
+ .mr2 = 0x00000018ul,
+ .dtcr = 0x730035C7ul,
+ .pgcr2 = 0x00F07A12ul,
+ .zq0cr1 = 0x0000005Dul,
+ .zq1cr1 = 0x0000005Bul,
+ .zq2cr1 = 0x0000005Bul,
+ .pir_v1 = 0x00000033ul,
+ .pir_v2 = 0x0000FF81ul,
+};
+
+/* DDR3 EMIF configuration data with 1600M rate, 8GB size */
+struct ddr3_emif_config ddr3_1600_8g = {
+ .sdcfg = 0x6200CE6Aul,
+ .sdtim1 = 0x16709C55ul,
+ .sdtim2 = 0x00001D4Aul,
+ .sdtim3 = 0x435DFF54ul,
+ .sdtim4 = 0x553F0CFFul,
+ .zqcfg = 0xF0073200ul,
+ .sdrfc = 0x00001869ul,
+};
+
+#ifdef CONFIG_K2HK_EVM
+/* DDR3 PHY configuration data with 1333M rate, and 2GB size */
+struct ddr3_phy_config ddr3phy_1333_2g = {
+ .pllcr = 0x0005C000ul,
+ .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
+ .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
+ .ptr0 = 0x42C21590ul,
+ .ptr1 = 0xD05612C0ul,
+ .ptr2 = 0, /* not set in gel */
+ .ptr3 = 0x0B4515C2ul,
+ .ptr4 = 0x0A6E08B4ul,
+ .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
+ .dcr_val = ((1 << 10)),
+ .dtpr0 = 0x8558AA55ul,
+ .dtpr1 = 0x32857280ul,
+ .dtpr2 = 0x5002C200ul,
+ .mr0 = 0x00001A60ul,
+ .mr1 = 0x00000006ul,
+ .mr2 = 0x00000010ul,
+ .dtcr = 0x710035C7ul,
+ .pgcr2 = 0x00F065B8ul,
+ .zq0cr1 = 0x0000005Dul,
+ .zq1cr1 = 0x0000005Bul,
+ .zq2cr1 = 0x0000005Bul,
+ .pir_v1 = 0x00000033ul,
+ .pir_v2 = 0x0000FF81ul,
+};
+
+/* DDR3 EMIF configuration data with 1333M rate, and 2GB size */
+struct ddr3_emif_config ddr3_1333_2g = {
+ .sdcfg = 0x62008C62ul,
+ .sdtim1 = 0x125C8044ul,
+ .sdtim2 = 0x00001D29ul,
+ .sdtim3 = 0x32CDFF43ul,
+ .sdtim4 = 0x543F0ADFul,
+ .zqcfg = 0x70073200ul,
+ .sdrfc = 0x00001457ul,
+};
+#endif
+
+int ddr3_get_dimm_params(char *dimm_name)
+{
+ int ret;
+ int old_bus;
+ u8 spd_params[256];
+
+ i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE);
+
+ old_bus = i2c_get_bus_num();
+ i2c_set_bus_num(1);
+
+ ret = i2c_read(0x53, 0, 1, spd_params, 256);
+
+ i2c_set_bus_num(old_bus);
+
+ dimm_name[0] = '\0';
+
+ if (ret) {
+ puts("Cannot read DIMM params\n");
+ return 1;
+ }
+
+ /*
+ * We need to convert spd data to dimm parameters
+ * and to DDR3 EMIF and PHY regirsters values.
+ * For now we just return DIMM type string value.
+ * Caller may use this value to choose appropriate
+ * a pre-set DDR3 configuration
+ */
+
+ strncpy(dimm_name, (char *)&spd_params[0x80], 18);
+ dimm_name[18] = '\0';
+
+ return 0;
+}
diff --git a/board/ti/ks2_evm/ddr3_cfg.h b/board/ti/ks2_evm/ddr3_cfg.h
new file mode 100644
index 0000000..d14bac3
--- /dev/null
+++ b/board/ti/ks2_evm/ddr3_cfg.h
@@ -0,0 +1,21 @@
+/*
+ * Keystone2: DDR3 configuration
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DDR3_CFG_H
+#define __DDR3_CFG_H
+
+extern struct ddr3_phy_config ddr3phy_1600_8g;
+extern struct ddr3_emif_config ddr3_1600_8g;
+
+extern struct ddr3_phy_config ddr3phy_1333_2g;
+extern struct ddr3_emif_config ddr3_1333_2g;
+
+int ddr3_get_dimm_params(char *dimm_name);
+
+#endif /* __DDR3_CFG_H */
diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c
index 31e9c31..21a5a0a 100644
--- a/board/ti/ks2_evm/ddr3_k2hk.c
+++ b/board/ti/ks2_evm/ddr3_k2hk.c
@@ -8,287 +8,18 @@
*/
#include <common.h>
+#include "ddr3_cfg.h"
#include <asm/arch/ddr3.h>
#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <i2c.h>
-
-/************************* *****************************/
-static struct ddr3_phy_config ddr3phy_1600_64A = {
- .pllcr = 0x0001C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0D861A80ul,
- .ptr4 = 0x0C827100ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK),
- .dcr_val = ((1 << 10) | (1 << 27)),
- .dtpr0 = 0xA19DBB66ul,
- .dtpr1 = 0x12868300ul,
- .dtpr2 = 0x50035200ul,
- .mr0 = 0x00001C70ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000018ul,
- .dtcr = 0x730035C7ul,
- .pgcr2 = 0x00F07A12ul,
- .zq0cr1 = 0x0000005Dul,
- .zq1cr1 = 0x0000005Bul,
- .zq2cr1 = 0x0000005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-static struct ddr3_emif_config ddr3_1600_64 = {
- .sdcfg = 0x6200CE6aul,
- .sdtim1 = 0x16709C55ul,
- .sdtim2 = 0x00001D4Aul,
- .sdtim3 = 0x435DFF54ul,
- .sdtim4 = 0x553F0CFFul,
- .zqcfg = 0xF0073200ul,
- .sdrfc = 0x00001869ul,
-};
-
-static struct ddr3_phy_config ddr3phy_1600_32 = {
- .pllcr = 0x0001C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0D861A80ul,
- .ptr4 = 0x0C827100ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK),
- .dcr_val = ((1 << 10) | (1 << 27)),
- .dtpr0 = 0xA19DBB66ul,
- .dtpr1 = 0x12868300ul,
- .dtpr2 = 0x50035200ul,
- .mr0 = 0x00001C70ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000018ul,
- .dtcr = 0x730035C7ul,
- .pgcr2 = 0x00F07A12ul,
- .zq0cr1 = 0x0000005Dul,
- .zq1cr1 = 0x0000005Bul,
- .zq2cr1 = 0x0000005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-static struct ddr3_emif_config ddr3_1600_32 = {
- .sdcfg = 0x6200DE6aul,
- .sdtim1 = 0x16709C55ul,
- .sdtim2 = 0x00001D4Aul,
- .sdtim3 = 0x435DFF54ul,
- .sdtim4 = 0x553F0CFFul,
- .zqcfg = 0x70073200ul,
- .sdrfc = 0x00001869ul,
-};
-
-/************************* *****************************/
-static struct ddr3_phy_config ddr3phy_1333_64A = {
- .pllcr = 0x0005C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0B4515C2ul,
- .ptr4 = 0x0A6E08B4ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK |
- NOSRA_MASK | UDIMM_MASK),
- .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)),
- .dtpr0 = 0x8558AA55ul,
- .dtpr1 = 0x12857280ul,
- .dtpr2 = 0x5002C200ul,
- .mr0 = 0x00001A60ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000010ul,
- .dtcr = 0x710035C7ul,
- .pgcr2 = 0x00F065B8ul,
- .zq0cr1 = 0x0000005Dul,
- .zq1cr1 = 0x0000005Bul,
- .zq2cr1 = 0x0000005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-static struct ddr3_emif_config ddr3_1333_64 = {
- .sdcfg = 0x62008C62ul,
- .sdtim1 = 0x125C8044ul,
- .sdtim2 = 0x00001D29ul,
- .sdtim3 = 0x32CDFF43ul,
- .sdtim4 = 0x543F0ADFul,
- .zqcfg = 0xF0073200ul,
- .sdrfc = 0x00001457ul,
-};
-
-static struct ddr3_phy_config ddr3phy_1333_32 = {
- .pllcr = 0x0005C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0B4515C2ul,
- .ptr4 = 0x0A6E08B4ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK |
- NOSRA_MASK | UDIMM_MASK),
- .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)),
- .dtpr0 = 0x8558AA55ul,
- .dtpr1 = 0x12857280ul,
- .dtpr2 = 0x5002C200ul,
- .mr0 = 0x00001A60ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000010ul,
- .dtcr = 0x710035C7ul,
- .pgcr2 = 0x00F065B8ul,
- .zq0cr1 = 0x0000005Dul,
- .zq1cr1 = 0x0000005Bul,
- .zq2cr1 = 0x0000005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-static struct ddr3_emif_config ddr3_1333_32 = {
- .sdcfg = 0x62009C62ul,
- .sdtim1 = 0x125C8044ul,
- .sdtim2 = 0x00001D29ul,
- .sdtim3 = 0x32CDFF43ul,
- .sdtim4 = 0x543F0ADFul,
- .zqcfg = 0xf0073200ul,
- .sdrfc = 0x00001457ul,
-};
-
-/************************* *****************************/
-static struct ddr3_phy_config ddr3phy_1333_64 = {
- .pllcr = 0x0005C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0B4515C2ul,
- .ptr4 = 0x0A6E08B4ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK),
- .dcr_val = ((1 << 10) | (1 << 27)),
- .dtpr0 = 0x8558AA55ul,
- .dtpr1 = 0x12857280ul,
- .dtpr2 = 0x5002C200ul,
- .mr0 = 0x00001A60ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000010ul,
- .dtcr = 0x710035C7ul,
- .pgcr2 = 0x00F065B8ul,
- .zq0cr1 = 0x0000005Dul,
- .zq1cr1 = 0x0000005Bul,
- .zq2cr1 = 0x0000005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-/******************************************************/
-
-/* DDR PHY Configs Updated for PG 2.0
- * zq0,1,2cr1 are updated for PG 2.0 specific configs *_pg2 */
-static struct ddr3_phy_config ddr3phy_1600_64A_pg2 = {
- .pllcr = 0x0001C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0D861A80ul,
- .ptr4 = 0x0C827100ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
- .dcr_val = ((1 << 10)),
- .dtpr0 = 0xA19DBB66ul,
- .dtpr1 = 0x32868300ul,
- .dtpr2 = 0x50035200ul,
- .mr0 = 0x00001C70ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000018ul,
- .dtcr = 0x730035C7ul,
- .pgcr2 = 0x00F07A12ul,
- .zq0cr1 = 0x0001005Dul,
- .zq1cr1 = 0x0001005Bul,
- .zq2cr1 = 0x0001005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-static struct ddr3_phy_config ddr3phy_1333_64A_pg2 = {
- .pllcr = 0x0005C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0B4515C2ul,
- .ptr4 = 0x0A6E08B4ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
- .dcr_val = ((1 << 10)),
- .dtpr0 = 0x8558AA55ul,
- .dtpr1 = 0x32857280ul,
- .dtpr2 = 0x5002C200ul,
- .mr0 = 0x00001A60ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000010ul,
- .dtcr = 0x710035C7ul,
- .pgcr2 = 0x00F065B8ul,
- .zq0cr1 = 0x0001005Dul,
- .zq1cr1 = 0x0001005Bul,
- .zq2cr1 = 0x0001005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-int get_dimm_params(char *dimm_name)
-{
- u8 spd_params[256];
- int ret;
- int old_bus;
-
- i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE);
-
- old_bus = i2c_get_bus_num();
- i2c_set_bus_num(1);
-
- ret = i2c_read(0x53, 0, 1, spd_params, 256);
-
- i2c_set_bus_num(old_bus);
-
- dimm_name[0] = '\0';
-
- if (ret) {
- puts("Cannot read DIMM params\n");
- return 1;
- }
-
- /*
- * We need to convert spd data to dimm parameters
- * and to DDR3 EMIF and PHY regirsters values.
- * For now we just return DIMM type string value.
- * Caller may use this value to choose appropriate
- * a pre-set DDR3 configuration
- */
-
- strncpy(dimm_name, (char *)&spd_params[0x80], 18);
- dimm_name[18] = '\0';
-
- return 0;
-}
struct pll_init_data ddr3a_333 = DDR3_PLL_333(A);
-struct pll_init_data ddr3b_333 = DDR3_PLL_333(B);
struct pll_init_data ddr3a_400 = DDR3_PLL_400(A);
-struct pll_init_data ddr3b_400 = DDR3_PLL_400(B);
void ddr3_init(void)
{
char dimm_name[32];
- get_dimm_params(dimm_name);
+ ddr3_get_dimm_params(dimm_name);
printf("Detected SO-DIMM [%s]\n", dimm_name);
@@ -299,21 +30,25 @@ void ddr3_init(void)
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
+ ddr3phy_1600_8g.zq0cr1 |= 0x10000;
+ ddr3phy_1600_8g.zq1cr1 |= 0x10000;
+ ddr3phy_1600_8g.zq2cr1 |= 0x10000;
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
- &ddr3phy_1600_64A_pg2);
+ &ddr3phy_1600_8g);
} else {
/* PG 1.1 */
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
- &ddr3phy_1600_64A);
+ &ddr3phy_1600_8g);
}
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
- &ddr3_1600_64);
+ &ddr3_1600_8g);
printf("DRAM: Capacity 8 GiB (includes reported below)\n");
} else {
- ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_32);
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g);
+ ddr3_1600_8g.sdcfg |= 0x1000;
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
- &ddr3_1600_32);
+ &ddr3_1600_8g);
printf("DRAM: Capacity 4 GiB (includes reported below)\n");
}
} else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) {
@@ -323,27 +58,27 @@ void ddr3_init(void)
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
+ ddr3phy_1333_2g.zq0cr1 |= 0x10000;
+ ddr3phy_1333_2g.zq1cr1 |= 0x10000;
+ ddr3phy_1333_2g.zq2cr1 |= 0x10000;
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
- &ddr3phy_1333_64A_pg2);
+ &ddr3phy_1333_2g);
} else {
/* PG 1.1 */
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
- &ddr3phy_1333_64A);
+ &ddr3phy_1333_2g);
}
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
- &ddr3_1333_64);
+ &ddr3_1333_2g);
} else {
- ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_32);
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_2g);
+ ddr3_1333_2g.sdcfg |= 0x1000;
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
- &ddr3_1333_32);
+ &ddr3_1333_2g);
}
} else {
printf("Unknown SO-DIMM. Cannot configure DDR3\n");
while (1)
;
}
-
- init_pll(&ddr3b_333);
- ddr3_init_ddrphy(KS2_DDR3B_DDRPHYC, &ddr3phy_1333_64);
- ddr3_init_ddremif(KS2_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64);
}
--
1.8.3.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [U-Boot, U-boot, 1/6] k2hk: use common KS2_ prefix for all hardware definitions
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 1/6] k2hk: use common KS2_ prefix for all hardware definitions Ivan Khoronzhuk
@ 2014-07-26 1:27 ` Tom Rini
0 siblings, 0 replies; 12+ messages in thread
From: Tom Rini @ 2014-07-26 1:27 UTC (permalink / raw)
To: u-boot
On Wed, Jul 09, 2014 at 11:44:44PM +0300, Khoronzhuk, Ivan wrote:
> Use KS2_ prefix in all definitions, for that replace K2HK_ prefix and
> add KS2_ prefix where it's needed. It requires to change names also
> in places where they're used. Align lines and remove redundant
> definitions in kardware-k2hk.h at the same time.
>
> Using common KS2_ prefix helps resolve redundant redefinitions and
> adds opportunity to use KS2_ definition across a project not thinking about
> what SoC should be used. It's more convenient and we don't need to worry
> about the SoC type in common files, hardware.h will think about that.
> The hardware.h decides definitions of what SoC to use.
>
> Acked-by: Murali Karicheri <m-karicheri2@ti.com>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140725/601269e2/attachment.pgp>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [U-Boot, U-boot, 3/6] ARM: keystone2: move K2HK board files to common KS2 board directory
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 3/6] ARM: keystone2: move K2HK board files to common KS2 board directory Ivan Khoronzhuk
@ 2014-07-26 1:27 ` Tom Rini
0 siblings, 0 replies; 12+ messages in thread
From: Tom Rini @ 2014-07-26 1:27 UTC (permalink / raw)
To: u-boot
On Wed, Jul 09, 2014 at 11:44:46PM +0300, Khoronzhuk, Ivan wrote:
> From: Hao Zhang <hzhang@ti.com>
>
> This patch moves K2HK board directory to a common Keystone II board
> directory. The Board related common functions are moved to a common
> keystone board file.
>
> Acked-by: Murali Karicheri <m-karicheri2@ti.com>
> Signed-off-by: Hao Zhang <hzhang@ti.com>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140725/0f0817b0/attachment.pgp>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [U-Boot, U-boot, 4/6] ARM: keystone: clock: move K2HK SoC dependent code in separate file
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 4/6] ARM: keystone: clock: move K2HK SoC dependent code in separate file Ivan Khoronzhuk
@ 2014-07-26 1:27 ` Tom Rini
0 siblings, 0 replies; 12+ messages in thread
From: Tom Rini @ 2014-07-26 1:27 UTC (permalink / raw)
To: u-boot
On Wed, Jul 09, 2014 at 11:44:47PM +0300, Khoronzhuk, Ivan wrote:
> This patch in general spit SoC type clock dependent code and general
> clock code. Before adding keystone II Edison k2e SoC which has
> slightly different dpll set, move k2hk dependent clock code to
> separate clock-k2hk.c file.
>
> Acked-by: Murali Karicheri <m-karicheri2@ti.com>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140725/51debc52/attachment.pgp>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [U-Boot, U-boot, 5/6] configs: k2hk_evm: config: add common EVM configuration header
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 5/6] configs: k2hk_evm: config: add common EVM configuration header Ivan Khoronzhuk
@ 2014-07-26 1:27 ` Tom Rini
0 siblings, 0 replies; 12+ messages in thread
From: Tom Rini @ 2014-07-26 1:27 UTC (permalink / raw)
To: u-boot
On Wed, Jul 09, 2014 at 11:44:48PM +0300, Khoronzhuk, Ivan wrote:
> From: Hao Zhang <hzhang@ti.com>
>
> This patch adds a common config header file for all the Keystone II
> EVM platforms. It combines a lot of general definitions in one file.
> The common header included in the EVM should be specific configuration
> header.
>
> Acked-by: Murali Karicheri <m-karicheri2@ti.com>
> Signed-off-by: Hao Zhang <hzhang@ti.com>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140725/3129d333/attachment.pgp>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [U-Boot, U-boot, 6/6] keystone: ddr3: move K2HK DDR3 configuration to a common file
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 6/6] keystone: ddr3: move K2HK DDR3 configuration to a common file Ivan Khoronzhuk
@ 2014-07-26 1:27 ` Tom Rini
0 siblings, 0 replies; 12+ messages in thread
From: Tom Rini @ 2014-07-26 1:27 UTC (permalink / raw)
To: u-boot
On Wed, Jul 09, 2014 at 11:44:49PM +0300, Khoronzhuk, Ivan wrote:
> From: Hao Zhang <hzhang@ti.com>
>
> It's convenient to hold configurations for DDR3 PHY and EMIF in
> separate common place. This patch moves K2HK DDR3 PHY and EMIF
> configuration data with different rates and memory size to a common
> ddr3_cfg.c file.
>
> Acked-by: Murali Karicheri <m-karicheri2@ti.com>
> Signed-off-by: Hao Zhang <hzhang@ti.com>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Applied to u-boot-ti/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140725/5f415e5d/attachment.pgp>
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2014-07-26 1:27 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-09 20:44 [U-Boot] [U-boot] [Patch 0/6] Generalize Keystone2 code for other SoC types Ivan Khoronzhuk
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 1/6] k2hk: use common KS2_ prefix for all hardware definitions Ivan Khoronzhuk
2014-07-26 1:27 ` [U-Boot] [U-Boot, U-boot, " Tom Rini
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 2/6] keystone2: add env option to do unitrd dt fixup Ivan Khoronzhuk
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 3/6] ARM: keystone2: move K2HK board files to common KS2 board directory Ivan Khoronzhuk
2014-07-26 1:27 ` [U-Boot] [U-Boot, U-boot, " Tom Rini
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 4/6] ARM: keystone: clock: move K2HK SoC dependent code in separate file Ivan Khoronzhuk
2014-07-26 1:27 ` [U-Boot] [U-Boot, U-boot, " Tom Rini
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 5/6] configs: k2hk_evm: config: add common EVM configuration header Ivan Khoronzhuk
2014-07-26 1:27 ` [U-Boot] [U-Boot, U-boot, " Tom Rini
2014-07-09 20:44 ` [U-Boot] [U-boot] [Patch 6/6] keystone: ddr3: move K2HK DDR3 configuration to a common file Ivan Khoronzhuk
2014-07-26 1:27 ` [U-Boot] [U-Boot, U-boot, " Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.