From: Lee Jones <lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: lee.jones@linaro.org, kernel@stlinux.com, thierry.reding@gmail.com, linux-pwm@vger.kernel.org, devicetree@vger.kernel.org, ajitpal.singh@st.com Subject: [PATCH v2 02/11] ARM: stih416: Add Pinctrl settings for PWM Date: Mon, 14 Jul 2014 15:33:23 +0100 [thread overview] Message-ID: <1405348412-7352-3-git-send-email-lee.jones@linaro.org> (raw) In-Reply-To: <1405348412-7352-1-git-send-email-lee.jones@linaro.org> Supply the Pinctrl configuration to enable PWM{0,1} lines on STiH416 based development boards. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/stih416-pinctrl.dtsi | 50 ++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index ee6c119..04e61d6 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -207,6 +207,29 @@ }; }; }; + + pwm1 { + pinctrl_pwm1_chan0_default: pwm1-0-default { + st,pins { + pwm-out = <&PIO3 0 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan1_default: pwm1-1-default { + st,pins { + pwm-out = <&PIO4 4 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan2_default: pwm1-2-default { + st,pins { + pwm-out = <&PIO4 6 ALT3 OUT>; + }; + }; + pinctrl_pwm1_chan3_default: pwm1-3-default { + st,pins { + pwm-out = <&PIO4 7 ALT3 OUT>; + }; + }; + }; }; pin-controller-front { @@ -301,6 +324,14 @@ st,bank-name = "PIO31"; }; + pwm0 { + pinctrl_pwm0_chan0_default: pwm0-0-default { + st,pins { + pwm-out = <&PIO9 7 ALT2 OUT>; + }; + }; + }; + serial2-oe { pinctrl_serial2_oe: serial2-1 { st,pins { @@ -467,6 +498,25 @@ }; }; }; + + pwm0 { + pinctrl_pwm0_chan1_default: pwm0-1-default { + st,pins { + pwm-out = <&PIO13 2 ALT2 OUT>; + }; + }; + pinctrl_pwm0_chan2_default: pwm0-2-default { + st,pins { + pwm-out = <&PIO15 2 ALT4 OUT>; + }; + }; + pinctrl_pwm0_chan3_default: pwm0-3-default { + st,pins { + pwm-out = <&PIO17 4 ALT1 OUT>; + }; + }; + }; + }; pin-controller-fvdp-fe { -- 1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 02/11] ARM: stih416: Add Pinctrl settings for PWM Date: Mon, 14 Jul 2014 15:33:23 +0100 [thread overview] Message-ID: <1405348412-7352-3-git-send-email-lee.jones@linaro.org> (raw) In-Reply-To: <1405348412-7352-1-git-send-email-lee.jones@linaro.org> Supply the Pinctrl configuration to enable PWM{0,1} lines on STiH416 based development boards. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/stih416-pinctrl.dtsi | 50 ++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index ee6c119..04e61d6 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -207,6 +207,29 @@ }; }; }; + + pwm1 { + pinctrl_pwm1_chan0_default: pwm1-0-default { + st,pins { + pwm-out = <&PIO3 0 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan1_default: pwm1-1-default { + st,pins { + pwm-out = <&PIO4 4 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan2_default: pwm1-2-default { + st,pins { + pwm-out = <&PIO4 6 ALT3 OUT>; + }; + }; + pinctrl_pwm1_chan3_default: pwm1-3-default { + st,pins { + pwm-out = <&PIO4 7 ALT3 OUT>; + }; + }; + }; }; pin-controller-front { @@ -301,6 +324,14 @@ st,bank-name = "PIO31"; }; + pwm0 { + pinctrl_pwm0_chan0_default: pwm0-0-default { + st,pins { + pwm-out = <&PIO9 7 ALT2 OUT>; + }; + }; + }; + serial2-oe { pinctrl_serial2_oe: serial2-1 { st,pins { @@ -467,6 +498,25 @@ }; }; }; + + pwm0 { + pinctrl_pwm0_chan1_default: pwm0-1-default { + st,pins { + pwm-out = <&PIO13 2 ALT2 OUT>; + }; + }; + pinctrl_pwm0_chan2_default: pwm0-2-default { + st,pins { + pwm-out = <&PIO15 2 ALT4 OUT>; + }; + }; + pinctrl_pwm0_chan3_default: pwm0-3-default { + st,pins { + pwm-out = <&PIO17 4 ALT1 OUT>; + }; + }; + }; + }; pin-controller-fvdp-fe { -- 1.8.3.2
next prev parent reply other threads:[~2014-07-14 14:34 UTC|newest] Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-07-14 14:33 [PATCH v2 00/11] pwm: Introduce ST's PWM driver Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-14 14:33 ` [PATCH v2 01/11] ARM: stih407: Add DT nodes for for PWM Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-14 14:33 ` Lee Jones [this message] 2014-07-14 14:33 ` [PATCH v2 02/11] ARM: stih416: Add Pinctrl settings " Lee Jones 2014-07-14 14:33 ` [PATCH v2 03/11] ARM: stih416: Add DT nodes " Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-14 14:33 ` [PATCH v2 04/11] ARM: stih416-b2020e: Enable PWM on the B2020 Rev-E Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-14 14:33 ` [PATCH v2 05/11] ARM: multi_v7_defconfig: Enable ST's PWM driver Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-14 14:33 ` [PATCH v2 06/11] pwm: sti: Add new driver for ST's PWM IP Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-08-07 14:23 ` Thierry Reding 2014-08-07 14:23 ` Thierry Reding 2014-08-07 14:23 ` Thierry Reding 2014-08-08 7:38 ` Lee Jones 2014-08-08 7:38 ` Lee Jones 2014-08-08 7:38 ` Lee Jones 2014-08-08 9:46 ` Thierry Reding 2014-08-08 9:46 ` Thierry Reding 2014-07-14 14:33 ` [PATCH v2 07/11] pwm: sti: Supply Device Tree binding documentation " Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-14 14:33 ` [PATCH v2 08/11] pwm: st: Fix PWM prescaler handling Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-14 14:33 ` [PATCH v2 09/11] pwm: sti: Ensure same period values for all channels Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-08-07 14:24 ` Thierry Reding 2014-08-07 14:24 ` Thierry Reding 2014-07-14 14:33 ` [PATCH v2 10/11] pwm: sti: Sync between enable/disable calls Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-14 14:33 ` [PATCH v2 11/11] pwm: sti: Remove PWM period table Lee Jones 2014-07-14 14:33 ` Lee Jones 2014-07-21 12:39 ` [PATCH v2 00/11] pwm: Introduce ST's PWM driver Lee Jones 2014-07-21 12:39 ` Lee Jones 2014-08-07 13:20 ` Thierry Reding 2014-08-07 13:20 ` Thierry Reding 2014-08-07 13:54 ` Lee Jones 2014-08-07 13:54 ` Lee Jones 2014-08-07 13:55 ` Thierry Reding 2014-08-07 13:55 ` Thierry Reding 2014-08-07 13:55 ` Thierry Reding
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1405348412-7352-3-git-send-email-lee.jones@linaro.org \ --to=lee.jones@linaro.org \ --cc=ajitpal.singh@st.com \ --cc=devicetree@vger.kernel.org \ --cc=kernel@stlinux.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pwm@vger.kernel.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.