All of lore.kernel.org
 help / color / mirror / Atom feed
From: Qiaowei Ren <qiaowei.ren@intel.com>
To: "H. Peter Anvin" <hpa@zytor.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>,
	Dave Hansen <dave.hansen@intel.com>
Cc: x86@kernel.org, linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	Qiaowei Ren <qiaowei.ren@intel.com>
Subject: [PATCH v7 08/10] x86, mpx: add prctl commands PR_MPX_REGISTER, PR_MPX_UNREGISTER
Date: Mon, 21 Jul 2014 13:38:42 +0800	[thread overview]
Message-ID: <1405921124-4230-9-git-send-email-qiaowei.ren@intel.com> (raw)
In-Reply-To: <1405921124-4230-1-git-send-email-qiaowei.ren@intel.com>

This patch adds the PR_MPX_REGISTER and PR_MPX_UNREGISTER prctl()
commands. These commands can be used to register and unregister MPX
related resource on the x86 platform.

The base of the bounds directory is set into mm_struct during
PR_MPX_REGISTER command execution. This member can be used to
check whether one application is mpx enabled.

Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
---
 arch/x86/include/asm/mpx.h       |    1 +
 arch/x86/include/asm/processor.h |   18 ++++++++++++
 arch/x86/kernel/mpx.c            |   56 ++++++++++++++++++++++++++++++++++++++
 include/linux/mm_types.h         |    3 ++
 include/uapi/linux/prctl.h       |    6 ++++
 kernel/sys.c                     |   12 ++++++++
 6 files changed, 96 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/mpx.h b/arch/x86/include/asm/mpx.h
index 780af63..6cb0853 100644
--- a/arch/x86/include/asm/mpx.h
+++ b/arch/x86/include/asm/mpx.h
@@ -43,6 +43,7 @@
 #define MPX_BT_SIZE_BYTES (1UL<<(MPX_BT_ENTRY_OFFSET+MPX_BT_ENTRY_SHIFT))
 
 #define MPX_BNDSTA_ERROR_CODE	0x3
+#define MPX_BNDCFG_ENABLE_FLAG	0x1
 #define MPX_BD_ENTRY_VALID_FLAG	0x1
 
 struct mpx_insn {
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index a4ea023..6e0966e 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -952,6 +952,24 @@ extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
 extern int get_tsc_mode(unsigned long adr);
 extern int set_tsc_mode(unsigned int val);
 
+/* Register/unregister a process' MPX related resource */
+#define MPX_REGISTER(tsk)	mpx_register((tsk))
+#define MPX_UNREGISTER(tsk)	mpx_unregister((tsk))
+
+#ifdef CONFIG_X86_INTEL_MPX
+extern int mpx_register(struct task_struct *tsk);
+extern int mpx_unregister(struct task_struct *tsk);
+#else
+static inline int mpx_register(struct task_struct *tsk)
+{
+	return -EINVAL;
+}
+static inline int mpx_unregister(struct task_struct *tsk)
+{
+	return -EINVAL;
+}
+#endif /* CONFIG_X86_INTEL_MPX */
+
 extern u16 amd_get_nb_id(int cpu);
 
 static inline uint32_t hypervisor_cpuid_base(const char *sig, uint32_t leaves)
diff --git a/arch/x86/kernel/mpx.c b/arch/x86/kernel/mpx.c
index c1957a8..6b7e526 100644
--- a/arch/x86/kernel/mpx.c
+++ b/arch/x86/kernel/mpx.c
@@ -1,6 +1,62 @@
 #include <linux/kernel.h>
 #include <linux/syscalls.h>
+#include <linux/prctl.h>
 #include <asm/mpx.h>
+#include <asm/i387.h>
+#include <asm/fpu-internal.h>
+
+/*
+ * This should only be called when cpuid has been checked
+ * and we are sure that MPX is available.
+ */
+static __user void *task_get_bounds_dir(struct task_struct *tsk)
+{
+	struct xsave_struct *xsave_buf;
+
+	fpu_xsave(&tsk->thread.fpu);
+	xsave_buf = &(tsk->thread.fpu.state->xsave);
+	if (!(xsave_buf->bndcsr.cfg_reg_u & MPX_BNDCFG_ENABLE_FLAG))
+		return NULL;
+
+	return (void __user *)(unsigned long)(xsave_buf->bndcsr.cfg_reg_u &
+			MPX_BNDCFG_ADDR_MASK);
+}
+
+int mpx_register(struct task_struct *tsk)
+{
+	struct mm_struct *mm = tsk->mm;
+
+	if (!cpu_has_mpx)
+		return -EINVAL;
+
+	/*
+	 * runtime in the userspace will be responsible for allocation of
+	 * the bounds directory. Then, it will save the base of the bounds
+	 * directory into XSAVE/XRSTOR Save Area and enable MPX through
+	 * XRSTOR instruction.
+	 *
+	 * fpu_xsave() is expected to be very expensive. In order to do
+	 * performance optimization, here we get the base of the bounds
+	 * directory and then save it into mm_struct to be used in future.
+	 */
+	mm->bd_addr = task_get_bounds_dir(tsk);
+	if (!mm->bd_addr)
+		return -EINVAL;
+
+	pr_debug("MPX BD base address %p\n", mm->bd_addr);
+	return 0;
+}
+
+int mpx_unregister(struct task_struct *tsk)
+{
+	struct mm_struct *mm = current->mm;
+
+	if (!cpu_has_mpx)
+		return -EINVAL;
+
+	mm->bd_addr = NULL;
+	return 0;
+}
 
 enum reg_type {
 	REG_TYPE_RM = 0,
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 96c5750..131b5b3 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -454,6 +454,9 @@ struct mm_struct {
 	bool tlb_flush_pending;
 #endif
 	struct uprobes_state uprobes_state;
+#ifdef CONFIG_X86_INTEL_MPX
+	void __user *bd_addr;		/* address of the bounds directory */
+#endif
 };
 
 static inline void mm_init_cpumask(struct mm_struct *mm)
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
index 58afc04..ce86fa9 100644
--- a/include/uapi/linux/prctl.h
+++ b/include/uapi/linux/prctl.h
@@ -152,4 +152,10 @@
 #define PR_SET_THP_DISABLE	41
 #define PR_GET_THP_DISABLE	42
 
+/*
+ * Register/unregister MPX related resource.
+ */
+#define PR_MPX_REGISTER		43
+#define PR_MPX_UNREGISTER	44
+
 #endif /* _LINUX_PRCTL_H */
diff --git a/kernel/sys.c b/kernel/sys.c
index 66a751e..eadff9c 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -91,6 +91,12 @@
 #ifndef SET_TSC_CTL
 # define SET_TSC_CTL(a)		(-EINVAL)
 #endif
+#ifndef MPX_REGISTER
+# define MPX_REGISTER(a)	(-EINVAL)
+#endif
+#ifndef MPX_UNREGISTER
+# define MPX_UNREGISTER(a)	(-EINVAL)
+#endif
 
 /*
  * this is where the system-wide overflow UID and GID are defined, for
@@ -2011,6 +2017,12 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
 			me->mm->def_flags &= ~VM_NOHUGEPAGE;
 		up_write(&me->mm->mmap_sem);
 		break;
+	case PR_MPX_REGISTER:
+		error = MPX_REGISTER(me);
+		break;
+	case PR_MPX_UNREGISTER:
+		error = MPX_UNREGISTER(me);
+		break;
 	default:
 		error = -EINVAL;
 		break;
-- 
1.7.1


WARNING: multiple messages have this Message-ID (diff)
From: Qiaowei Ren <qiaowei.ren@intel.com>
To: "H. Peter Anvin" <hpa@zytor.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>,
	Dave Hansen <dave.hansen@intel.com>
Cc: x86@kernel.org, linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	Qiaowei Ren <qiaowei.ren@intel.com>
Subject: [PATCH v7 08/10] x86, mpx: add prctl commands PR_MPX_REGISTER, PR_MPX_UNREGISTER
Date: Mon, 21 Jul 2014 13:38:42 +0800	[thread overview]
Message-ID: <1405921124-4230-9-git-send-email-qiaowei.ren@intel.com> (raw)
In-Reply-To: <1405921124-4230-1-git-send-email-qiaowei.ren@intel.com>

This patch adds the PR_MPX_REGISTER and PR_MPX_UNREGISTER prctl()
commands. These commands can be used to register and unregister MPX
related resource on the x86 platform.

The base of the bounds directory is set into mm_struct during
PR_MPX_REGISTER command execution. This member can be used to
check whether one application is mpx enabled.

Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
---
 arch/x86/include/asm/mpx.h       |    1 +
 arch/x86/include/asm/processor.h |   18 ++++++++++++
 arch/x86/kernel/mpx.c            |   56 ++++++++++++++++++++++++++++++++++++++
 include/linux/mm_types.h         |    3 ++
 include/uapi/linux/prctl.h       |    6 ++++
 kernel/sys.c                     |   12 ++++++++
 6 files changed, 96 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/mpx.h b/arch/x86/include/asm/mpx.h
index 780af63..6cb0853 100644
--- a/arch/x86/include/asm/mpx.h
+++ b/arch/x86/include/asm/mpx.h
@@ -43,6 +43,7 @@
 #define MPX_BT_SIZE_BYTES (1UL<<(MPX_BT_ENTRY_OFFSET+MPX_BT_ENTRY_SHIFT))
 
 #define MPX_BNDSTA_ERROR_CODE	0x3
+#define MPX_BNDCFG_ENABLE_FLAG	0x1
 #define MPX_BD_ENTRY_VALID_FLAG	0x1
 
 struct mpx_insn {
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index a4ea023..6e0966e 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -952,6 +952,24 @@ extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
 extern int get_tsc_mode(unsigned long adr);
 extern int set_tsc_mode(unsigned int val);
 
+/* Register/unregister a process' MPX related resource */
+#define MPX_REGISTER(tsk)	mpx_register((tsk))
+#define MPX_UNREGISTER(tsk)	mpx_unregister((tsk))
+
+#ifdef CONFIG_X86_INTEL_MPX
+extern int mpx_register(struct task_struct *tsk);
+extern int mpx_unregister(struct task_struct *tsk);
+#else
+static inline int mpx_register(struct task_struct *tsk)
+{
+	return -EINVAL;
+}
+static inline int mpx_unregister(struct task_struct *tsk)
+{
+	return -EINVAL;
+}
+#endif /* CONFIG_X86_INTEL_MPX */
+
 extern u16 amd_get_nb_id(int cpu);
 
 static inline uint32_t hypervisor_cpuid_base(const char *sig, uint32_t leaves)
diff --git a/arch/x86/kernel/mpx.c b/arch/x86/kernel/mpx.c
index c1957a8..6b7e526 100644
--- a/arch/x86/kernel/mpx.c
+++ b/arch/x86/kernel/mpx.c
@@ -1,6 +1,62 @@
 #include <linux/kernel.h>
 #include <linux/syscalls.h>
+#include <linux/prctl.h>
 #include <asm/mpx.h>
+#include <asm/i387.h>
+#include <asm/fpu-internal.h>
+
+/*
+ * This should only be called when cpuid has been checked
+ * and we are sure that MPX is available.
+ */
+static __user void *task_get_bounds_dir(struct task_struct *tsk)
+{
+	struct xsave_struct *xsave_buf;
+
+	fpu_xsave(&tsk->thread.fpu);
+	xsave_buf = &(tsk->thread.fpu.state->xsave);
+	if (!(xsave_buf->bndcsr.cfg_reg_u & MPX_BNDCFG_ENABLE_FLAG))
+		return NULL;
+
+	return (void __user *)(unsigned long)(xsave_buf->bndcsr.cfg_reg_u &
+			MPX_BNDCFG_ADDR_MASK);
+}
+
+int mpx_register(struct task_struct *tsk)
+{
+	struct mm_struct *mm = tsk->mm;
+
+	if (!cpu_has_mpx)
+		return -EINVAL;
+
+	/*
+	 * runtime in the userspace will be responsible for allocation of
+	 * the bounds directory. Then, it will save the base of the bounds
+	 * directory into XSAVE/XRSTOR Save Area and enable MPX through
+	 * XRSTOR instruction.
+	 *
+	 * fpu_xsave() is expected to be very expensive. In order to do
+	 * performance optimization, here we get the base of the bounds
+	 * directory and then save it into mm_struct to be used in future.
+	 */
+	mm->bd_addr = task_get_bounds_dir(tsk);
+	if (!mm->bd_addr)
+		return -EINVAL;
+
+	pr_debug("MPX BD base address %p\n", mm->bd_addr);
+	return 0;
+}
+
+int mpx_unregister(struct task_struct *tsk)
+{
+	struct mm_struct *mm = current->mm;
+
+	if (!cpu_has_mpx)
+		return -EINVAL;
+
+	mm->bd_addr = NULL;
+	return 0;
+}
 
 enum reg_type {
 	REG_TYPE_RM = 0,
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 96c5750..131b5b3 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -454,6 +454,9 @@ struct mm_struct {
 	bool tlb_flush_pending;
 #endif
 	struct uprobes_state uprobes_state;
+#ifdef CONFIG_X86_INTEL_MPX
+	void __user *bd_addr;		/* address of the bounds directory */
+#endif
 };
 
 static inline void mm_init_cpumask(struct mm_struct *mm)
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
index 58afc04..ce86fa9 100644
--- a/include/uapi/linux/prctl.h
+++ b/include/uapi/linux/prctl.h
@@ -152,4 +152,10 @@
 #define PR_SET_THP_DISABLE	41
 #define PR_GET_THP_DISABLE	42
 
+/*
+ * Register/unregister MPX related resource.
+ */
+#define PR_MPX_REGISTER		43
+#define PR_MPX_UNREGISTER	44
+
 #endif /* _LINUX_PRCTL_H */
diff --git a/kernel/sys.c b/kernel/sys.c
index 66a751e..eadff9c 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -91,6 +91,12 @@
 #ifndef SET_TSC_CTL
 # define SET_TSC_CTL(a)		(-EINVAL)
 #endif
+#ifndef MPX_REGISTER
+# define MPX_REGISTER(a)	(-EINVAL)
+#endif
+#ifndef MPX_UNREGISTER
+# define MPX_UNREGISTER(a)	(-EINVAL)
+#endif
 
 /*
  * this is where the system-wide overflow UID and GID are defined, for
@@ -2011,6 +2017,12 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
 			me->mm->def_flags &= ~VM_NOHUGEPAGE;
 		up_write(&me->mm->mmap_sem);
 		break;
+	case PR_MPX_REGISTER:
+		error = MPX_REGISTER(me);
+		break;
+	case PR_MPX_UNREGISTER:
+		error = MPX_UNREGISTER(me);
+		break;
 	default:
 		error = -EINVAL;
 		break;
-- 
1.7.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2014-07-21  5:42 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-21  5:38 [PATCH v7 00/10] Intel MPX support Qiaowei Ren
2014-07-21  5:38 ` Qiaowei Ren
2014-07-21  5:38 ` [PATCH v7 01/10] x86, mpx: introduce VM_MPX to indicate that a VMA is MPX specific Qiaowei Ren
2014-07-21  5:38   ` Qiaowei Ren
2014-07-21  5:38 ` [PATCH v7 02/10] x86, mpx: add MPX specific mmap interface Qiaowei Ren
2014-07-21  5:38   ` Qiaowei Ren
2014-07-21  5:38 ` [PATCH v7 03/10] x86, mpx: add macro cpu_has_mpx Qiaowei Ren
2014-07-21  5:38   ` Qiaowei Ren
2014-07-22 16:18   ` Dave Hansen
2014-07-22 16:18     ` Dave Hansen
2014-07-23  2:35     ` Ren, Qiaowei
2014-07-23  2:35       ` Ren, Qiaowei
2014-07-23 16:02       ` Dave Hansen
2014-07-23 16:02         ` Dave Hansen
2014-07-24  0:56         ` Ren, Qiaowei
2014-07-24  0:56           ` Ren, Qiaowei
2014-07-24  4:46           ` Dave Hansen
2014-07-24  4:46             ` Dave Hansen
2014-07-24  5:23             ` Ren, Qiaowei
2014-07-24  5:23               ` Ren, Qiaowei
2014-07-21  5:38 ` [PATCH v7 04/10] x86, mpx: hook #BR exception handler to allocate bound tables Qiaowei Ren
2014-07-21  5:38   ` Qiaowei Ren
2014-07-21  5:38 ` [PATCH v7 05/10] x86, mpx: extend siginfo structure to include bound violation information Qiaowei Ren
2014-07-21  5:38   ` Qiaowei Ren
2014-07-22  0:42   ` Zhang, Tianfei
2014-07-22  0:42     ` Zhang, Tianfei
2014-07-21  5:38 ` [PATCH v7 06/10] mips: sync struct siginfo with general version Qiaowei Ren
2014-07-21  5:38   ` Qiaowei Ren
2014-07-21  5:38 ` [PATCH v7 07/10] x86, mpx: decode MPX instruction to get bound violation information Qiaowei Ren
2014-07-21  5:38   ` Qiaowei Ren
2014-07-21  6:07   ` Andi Kleen
2014-07-21  6:07     ` Andi Kleen
2014-07-21  6:11     ` Ren, Qiaowei
2014-07-21  6:11       ` Ren, Qiaowei
2014-07-21  5:38 ` Qiaowei Ren [this message]
2014-07-21  5:38   ` [PATCH v7 08/10] x86, mpx: add prctl commands PR_MPX_REGISTER, PR_MPX_UNREGISTER Qiaowei Ren
2014-07-21  6:09   ` Andi Kleen
2014-07-21  6:09     ` Andi Kleen
2014-10-13 17:41     ` Dave Hansen
2014-10-13 17:41       ` Dave Hansen
2014-10-14  1:44       ` Ren, Qiaowei
2014-10-14  1:44         ` Ren, Qiaowei
2014-07-23 16:20   ` Dave Hansen
2014-07-23 16:20     ` Dave Hansen
2014-07-21  5:38 ` [PATCH v7 09/10] x86, mpx: cleanup unused bound tables Qiaowei Ren
2014-07-21  5:38   ` Qiaowei Ren
2014-07-22  0:50   ` Zhang, Tianfei
2014-07-22  0:50     ` Zhang, Tianfei
2014-07-23 16:38   ` Dave Hansen
2014-07-23 16:38     ` Dave Hansen
2014-07-24  0:49     ` Ren, Qiaowei
2014-07-24  0:49       ` Ren, Qiaowei
2014-07-24  1:04       ` Dave Hansen
2014-07-24  1:04         ` Dave Hansen
2014-07-24  1:27         ` Ren, Qiaowei
2014-07-24  1:27           ` Ren, Qiaowei
2014-07-21  5:38 ` [PATCH v7 10/10] x86, mpx: add documentation on Intel MPX Qiaowei Ren
2014-07-21  5:38   ` Qiaowei Ren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1405921124-4230-9-git-send-email-qiaowei.ren@intel.com \
    --to=qiaowei.ren@intel.com \
    --cc=dave.hansen@intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mingo@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.