* [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding @ 2014-07-16 20:17 Shruti Kanetkar 2014-07-16 20:17 ` [PATCH v2 2/7] net/fsl_pq_mdio: Document supported compatibles Shruti Kanetkar ` (6 more replies) 0 siblings, 7 replies; 23+ messages in thread From: Shruti Kanetkar @ 2014-07-16 20:17 UTC (permalink / raw) To: scottwood; +Cc: Shruti Kanetkar, linuxppc-dev This document covers FManv2 and FManv3 mEMAC MDIO Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> --- .../devicetree/bindings/net/fsl-xgmac-phy.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/fsl-xgmac-phy.txt diff --git a/Documentation/devicetree/bindings/net/fsl-xgmac-phy.txt b/Documentation/devicetree/bindings/net/fsl-xgmac-phy.txt new file mode 100644 index 0000000..2f2d56d --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl-xgmac-phy.txt @@ -0,0 +1,29 @@ +*MDIO IO device + +The MDIO is a bus to which the PHY devices are connected. For each +device that exists on this bus, a child node should be created. + +Required properties: + - compatible: Currently supported strings/devices are: + - "fsl,fman-xmdio" (Must be used for 10 Gb/s MDIO from FMan v2. + Can be used for 1/10 Gb/s MDIO from FMan v3) + - "fsl,fman-memac-mdio" (Must be used for 1/10 Gb/s MDIO from + FMan v3) + - reg + + Example for FMan v2: + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + }; + + Example for FMan v3: + + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + } -- 1.8.3.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v2 2/7] net/fsl_pq_mdio: Document supported compatibles 2014-07-16 20:17 [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shruti Kanetkar @ 2014-07-16 20:17 ` Shruti Kanetkar 2014-07-16 20:17 ` [PATCH v2 3/7] powerpc/corenet: Create the dts components for the DPAA FMan Shruti Kanetkar ` (5 subsequent siblings) 6 siblings, 0 replies; 23+ messages in thread From: Shruti Kanetkar @ 2014-07-16 20:17 UTC (permalink / raw) To: scottwood; +Cc: Shruti Kanetkar, linuxppc-dev The device tree binding(s) document has fallen out of sync with the driver code. Update the list of supported devices to reflect current driver capabilities Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> --- Documentation/devicetree/bindings/net/fsl-tsec-phy.txt | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index be6ea89..1e97532 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -8,7 +8,16 @@ of how to define a PHY. Required properties: - reg : Offset and length of the register set for the device - compatible : Should define the compatible device type for the - mdio. Currently, this is most likely to be "fsl,gianfar-mdio" + mdio. Currently supported strings/devices are: + - "fsl,gianfar-tbi" + - "fsl,gianfar-mdio" + - "fsl,etsec2-tbi" + - "fsl,etsec2-mdio" + - "fsl,ucc-mdio" + - "fsl,fman-mdio" + When device_type is "mdio", the following strings are also considered: + - "gianfar" + - "ucc_geth_phy" Example: -- 1.8.3.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v2 3/7] powerpc/corenet: Create the dts components for the DPAA FMan 2014-07-16 20:17 [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shruti Kanetkar 2014-07-16 20:17 ` [PATCH v2 2/7] net/fsl_pq_mdio: Document supported compatibles Shruti Kanetkar @ 2014-07-16 20:17 ` Shruti Kanetkar 2014-07-21 22:13 ` Scott Wood 2014-07-16 20:17 ` [PATCH v2 4/7] powerpc/corenet: Add DPAA FMan support to the SoC device tree(s) Shruti Kanetkar ` (4 subsequent siblings) 6 siblings, 1 reply; 23+ messages in thread From: Shruti Kanetkar @ 2014-07-16 20:17 UTC (permalink / raw) To: scottwood; +Cc: Shruti Kanetkar, linuxppc-dev '761743e net/fsl_pq_mdio: add support for the Fman 1G MDIO controller' introduced driver support for the FMan MDIO controller. Now add the DT description for the MDIO controller from all FMan revisions Note that the FMan v3 MDIO controller is not compatible with prior revisions of FMan (also QE and eTSEC) however, we're adding basic DT support here Based on prior work by Andy Fleming <afleming@gmail.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> --- arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi | 40 ++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi | 40 ++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi | 54 ++++++++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi | 42 +++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi | 54 ++++++++++++++++++++++ 32 files changed, 1364 insertions(+) create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi new file mode 100644 index 0000000..494308a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi new file mode 100644 index 0000000..e815a3f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + mdio0: mdio@e1120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe1120 0xee0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi new file mode 100644 index 0000000..bc99e00 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + mdio@e3120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe3120 0xee0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi new file mode 100644 index 0000000..2bccf97 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + mdio@e5120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe5120 0xee0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi new file mode 100644 index 0000000..e244b50 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + mdio@e7120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe7120 0xee0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi new file mode 100644 index 0000000..5943c7e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + mdio@e9120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe9120 0xee0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi new file mode 100644 index 0000000..4d5c366 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi @@ -0,0 +1,40 @@ +/* + * QorIQ FMan device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x400000 0x100000>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi new file mode 100644 index 0000000..fb5f5d7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + mdio@f0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-xmdio"; + reg = <0xf0000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi new file mode 100644 index 0000000..406e3b7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + mdio@e1120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe1120 0xee0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi new file mode 100644 index 0000000..bb56bf7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + mdio@e3120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe3120 0xee0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi new file mode 100644 index 0000000..8860af0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + mdio@e5120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe5120 0xee0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi new file mode 100644 index 0000000..357638a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + mdio@e7120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe7120 0xee0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi new file mode 100644 index 0000000..9689391 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + mdio@e9120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe9120 0xee0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi new file mode 100644 index 0000000..67e934a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi @@ -0,0 +1,40 @@ +/* + * QorIQ FMan device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x500000 0x100000>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi new file mode 100644 index 0000000..9fde12e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@400000 { + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi new file mode 100644 index 0000000..b5be001 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + mdio@f3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi new file mode 100644 index 0000000..3bf044e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@400000 { + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi new file mode 100644 index 0000000..8f3f516 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@400000 { + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi new file mode 100644 index 0000000..730093d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@400000 { + mdio@e5000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe5000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi new file mode 100644 index 0000000..af7a6de --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@400000 { + mdio@e7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe7000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi new file mode 100644 index 0000000..d503692 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@400000 { + mdio@e9000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe9000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi new file mode 100644 index 0000000..60f228c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + mdio@eb000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xeb000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi new file mode 100644 index 0000000..a6481e5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi @@ -0,0 +1,54 @@ +/* + * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + /* mdio nodes for fman v3 @ 0x400000 */ + mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + }; + + mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi new file mode 100644 index 0000000..c8a2f06 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi new file mode 100644 index 0000000..1cbca34 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + mdio@f3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi new file mode 100644 index 0000000..b9522a7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi new file mode 100644 index 0000000..bdddc50 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi new file mode 100644 index 0000000..d998002 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + mdio@e5000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe5000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi new file mode 100644 index 0000000..e56f98a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + mdio@e7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe7000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi new file mode 100644 index 0000000..5003643 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + mdio@e9000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe9000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi new file mode 100644 index 0000000..8a65571 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + mdio@eb000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xeb000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi new file mode 100644 index 0000000..c2478a8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi @@ -0,0 +1,54 @@ +/* + * QorIQ FMan v3 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +fman@500000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + /* mdio nodes for fman v3 @ 0x500000 */ + mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + }; + + mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + }; +}; -- 1.8.3.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH v2 3/7] powerpc/corenet: Create the dts components for the DPAA FMan 2014-07-16 20:17 ` [PATCH v2 3/7] powerpc/corenet: Create the dts components for the DPAA FMan Shruti Kanetkar @ 2014-07-21 22:13 ` Scott Wood 0 siblings, 0 replies; 23+ messages in thread From: Scott Wood @ 2014-07-21 22:13 UTC (permalink / raw) To: Shruti Kanetkar; +Cc: linuxppc-dev On Wed, 2014-07-16 at 15:17 -0500, Shruti Kanetkar wrote: > '761743e net/fsl_pq_mdio: add support for the Fman 1G MDIO controller' > introduced driver support for the FMan MDIO controller. Now add the DT > description for the MDIO controller from all FMan revisions > > Note that the FMan v3 MDIO controller is not compatible with prior revisions > of FMan (also QE and eTSEC) however, we're adding basic DT support here > > Based on prior work by Andy Fleming <afleming@gmail.com> > > Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> > --- What changed in v2? > +fman@500000 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; NACK as previously discussed. Please work with Igal Liberman who has been working on the fman binding. Or, if you want to make a case for this being truly independent of the rest of FMan, make it truly independent. But is it indepedent? If I write to FM_RSTC[RFM], will the MDIO be reset as well? -Scott ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v2 4/7] powerpc/corenet: Add DPAA FMan support to the SoC device tree(s) 2014-07-16 20:17 [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shruti Kanetkar 2014-07-16 20:17 ` [PATCH v2 2/7] net/fsl_pq_mdio: Document supported compatibles Shruti Kanetkar 2014-07-16 20:17 ` [PATCH v2 3/7] powerpc/corenet: Create the dts components for the DPAA FMan Shruti Kanetkar @ 2014-07-16 20:17 ` Shruti Kanetkar 2014-07-16 20:17 ` [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board " Shruti Kanetkar ` (3 subsequent siblings) 6 siblings, 0 replies; 23+ messages in thread From: Shruti Kanetkar @ 2014-07-16 20:17 UTC (permalink / raw) To: scottwood; +Cc: Shruti Kanetkar, linuxppc-dev FMan 1 Gb/s MACs (dTSEC and mEMAC) have support for SGMII PHYs. Add support for the internal SerDes TBI PHYs Based on prior work by Andy Fleming <afleming@gmail.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> --- arch/powerpc/boot/dts/fsl/b4860si-post.dtsi | 28 +++++ arch/powerpc/boot/dts/fsl/b4si-post.dtsi | 51 +++++++++ arch/powerpc/boot/dts/fsl/p1023si-post.dtsi | 14 +++ arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 64 ++++++++++++ arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 64 ++++++++++++ arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 104 +++++++++++++++++++ arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 64 ++++++++++++ arch/powerpc/boot/dts/fsl/p5040si-post.dtsi | 128 +++++++++++++++++++++++ arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 154 ++++++++++++++++++++++++++++ 9 files changed, 671 insertions(+) diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi index 582381d..a60669e 100644 --- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi @@ -168,6 +168,34 @@ compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0"; }; +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + ethernet@e8000 { + tbi-handle = <&tbi4>; + }; + + mdio@e9000 { + tbi4: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@ea000 { + tbi-handle = <&tbi5>; + }; + + mdio@eb000 { + tbi5: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + }; + L2: l2-cache-controller@c20000 { compatible = "fsl,b4860-l2-cache-controller"; }; diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi index 1a54ba7..4cd4a31 100644 --- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi @@ -261,6 +261,57 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-sec5.3-0.dtsi" +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" + fman@400000 { + ethernet@e0000 { + tbi-handle = <&tbi0>; + }; + + mdio@e1000 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e2000 { + tbi-handle = <&tbi1>; + }; + + mdio@e3000 { + tbi1: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e4000 { + tbi-handle = <&tbi2>; + }; + + mdio@e5000 { + tbi2: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e6000 { + tbi-handle = <&tbi3>; + }; + + mdio@e7000 { + tbi3: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + }; + L2: l2-cache-controller@c20000 { compatible = "fsl,b4-l2-cache-controller"; reg = <0xc20000 0x1000>; diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi index 81437fd..01fd153 100644 --- a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi @@ -226,4 +226,18 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + + fman@100000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x100000 0x100000>; + compatible = "simple-bus"; + + mdio@e1120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe1120 0xee0>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 69ce102..6587d47 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -451,4 +451,68 @@ crypto: crypto@300000 { fsl,iommu-parent = <&pamu1>; }; + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + ethernet@e0000 { + tbi-handle = <&tbi0>; + }; + + mdio@e1120 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e2000 { + tbi-handle = <&tbi1>; + }; + + mdio@e3120 { + tbi1: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e4000 { + tbi-handle = <&tbi2>; + }; + + mdio@e5120 { + tbi2: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e6000 { + tbi-handle = <&tbi3>; + }; + + mdio@e7120 { + tbi3: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e8000 { + tbi-handle = <&tbi4>; + }; + + mdio@e9120 { + tbi4: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi index cd63cb1..43889c4 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -478,4 +478,68 @@ crypto: crypto@300000 { fsl,iommu-parent = <&pamu1>; }; + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + ethernet@e0000 { + tbi-handle = <&tbi0>; + }; + + mdio@e1120 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e2000 { + tbi-handle = <&tbi1>; + }; + + mdio@e3120 { + tbi1: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e4000 { + tbi-handle = <&tbi2>; + }; + + mdio@e5120 { + tbi2: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e6000 { + tbi-handle = <&tbi3>; + }; + + mdio@e7120 { + tbi3: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e8000 { + tbi-handle = <&tbi4>; + }; + + mdio@e9120 { + tbi4: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 12947cc..9a11fc2 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -534,4 +534,108 @@ crypto: crypto@300000 { fsl,iommu-parent = <&pamu1>; }; + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + ethernet@e0000 { + tbi-handle = <&tbi0>; + }; + + mdio@e1120 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e2000 { + tbi-handle = <&tbi1>; + }; + + mdio@e3120 { + tbi1: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e4000 { + tbi-handle = <&tbi2>; + }; + + mdio@e5120 { + tbi2: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e6000 { + tbi-handle = <&tbi3>; + }; + + mdio@e7120 { + tbi3: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + }; + +/include/ "qoriq-fman-1.dtsi" +/include/ "qoriq-fman-1-1g-0.dtsi" +/include/ "qoriq-fman-1-1g-1.dtsi" +/include/ "qoriq-fman-1-1g-2.dtsi" +/include/ "qoriq-fman-1-1g-3.dtsi" +/include/ "qoriq-fman-1-10g-0.dtsi" + fman@500000 { + ethernet@e0000 { + tbi-handle = <&tbi5>; + }; + + mdio@e1120 { + tbi5: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e2000 { + tbi-handle = <&tbi6>; + }; + + mdio@e3120 { + tbi6: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e4000 { + tbi-handle = <&tbi7>; + }; + + mdio@e5120 { + tbi7: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e6000 { + tbi-handle = <&tbi8>; + }; + + mdio@e7120 { + tbi8: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index 4c4a2b0..221af7a 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -469,4 +469,68 @@ raideng@320000 { fsl,iommu-parent = <&pamu1>; }; + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + ethernet@e0000 { + tbi-handle = <&tbi0>; + }; + + mdio@e1120 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e2000 { + tbi-handle = <&tbi1>; + }; + + mdio@e3120 { + tbi1: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e4000 { + tbi-handle = <&tbi2>; + }; + + mdio@e5120 { + tbi2: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e6000 { + tbi-handle = <&tbi3>; + }; + + mdio@e7120 { + tbi3: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e8000 { + tbi-handle = <&tbi4>; + }; + + mdio@e9120 { + tbi4: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi index 67296fd..da4b523 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -443,4 +443,132 @@ crypto@300000 { fsl,iommu-parent = <&pamu4>; }; + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + ethernet@e0000 { + tbi-handle = <&tbi0>; + }; + + mdio@e1120 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e2000 { + tbi-handle = <&tbi1>; + }; + + mdio@e3120 { + tbi1: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e4000 { + tbi-handle = <&tbi2>; + }; + + mdio@e5120 { + tbi2: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e6000 { + tbi-handle = <&tbi3>; + }; + + mdio@e7120 { + tbi3: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e8000 { + tbi-handle = <&tbi4>; + }; + + mdio@e9120 { + tbi4: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + }; + +/include/ "qoriq-fman-1.dtsi" +/include/ "qoriq-fman-1-1g-0.dtsi" +/include/ "qoriq-fman-1-1g-1.dtsi" +/include/ "qoriq-fman-1-1g-2.dtsi" +/include/ "qoriq-fman-1-1g-3.dtsi" +/include/ "qoriq-fman-1-1g-4.dtsi" +/include/ "qoriq-fman-1-10g-0.dtsi" + fman@500000 { + ethernet@e0000 { + tbi-handle = <&tbi5>; + }; + + mdio@e1120 { + tbi5: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e2000 { + tbi-handle = <&tbi6>; + }; + + mdio@e3120 { + tbi6: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e4000 { + tbi-handle = <&tbi7>; + }; + + mdio@e5120 { + tbi7: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e6000 { + tbi-handle = <&tbi8>; + }; + + mdio@e7120 { + tbi8: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e8000 { + tbi-handle = <&tbi9>; + }; + + mdio@e9120 { + tbi9: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi index a3d582e..f885274 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -527,4 +527,158 @@ reg = <0xca0000 0x40000>; next-level-cache = <&cpc>; }; + +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + ethernet@e0000 { + tbi-handle = <&tbi0>; + }; + + mdio@e1000 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e2000 { + tbi-handle = <&tbi1>; + }; + + mdio@e3000 { + tbi1: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e4000 { + tbi-handle = <&tbi2>; + }; + + mdio@e5000 { + tbi2: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e6000 { + tbi-handle = <&tbi3>; + }; + + mdio@e7000 { + tbi3: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e8000 { + tbi-handle = <&tbi4>; + }; + + mdio@e9000 { + tbi4: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@ea000 { + tbi-handle = <&tbi5>; + }; + + mdio@eb000 { + tbi5: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + }; + +/include/ "qoriq-fman3-1.dtsi" +/include/ "qoriq-fman3-1-1g-0.dtsi" +/include/ "qoriq-fman3-1-1g-1.dtsi" +/include/ "qoriq-fman3-1-1g-2.dtsi" +/include/ "qoriq-fman3-1-1g-3.dtsi" +/include/ "qoriq-fman3-1-1g-4.dtsi" +/include/ "qoriq-fman3-1-1g-5.dtsi" +/include/ "qoriq-fman3-1-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@500000 { + ethernet@e0000 { + tbi-handle = <&tbi6>; + }; + + mdio@e1000 { + tbi6: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e2000 { + tbi-handle = <&tbi7>; + }; + + mdio@e3000 { + tbi7: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e4000 { + tbi-handle = <&tbi8>; + }; + + mdio@e5000 { + tbi8: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e6000 { + tbi-handle = <&tbi9>; + }; + + mdio@e7000 { + tbi9: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@e8000 { + tbi-handle = <&tbi10>; + }; + + mdio@e9000 { + tbi10: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + ethernet@ea000 { + tbi-handle = <&tbi11>; + }; + + mdio@eb000 { + tbi11: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + }; }; -- 1.8.3.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s) 2014-07-16 20:17 [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shruti Kanetkar ` (2 preceding siblings ...) 2014-07-16 20:17 ` [PATCH v2 4/7] powerpc/corenet: Add DPAA FMan support to the SoC device tree(s) Shruti Kanetkar @ 2014-07-16 20:17 ` Shruti Kanetkar 2014-07-21 22:45 ` Scott Wood 2014-07-16 20:17 ` [PATCH v2 6/7] powerpc/corenet: Enable muxing MDIO buses via GPIO Shruti Kanetkar ` (2 subsequent siblings) 6 siblings, 1 reply; 23+ messages in thread From: Shruti Kanetkar @ 2014-07-16 20:17 UTC (permalink / raw) To: scottwood; +Cc: Shruti Kanetkar, linuxppc-dev Based on prior work by Andy Fleming <afleming@gmail.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> --- arch/powerpc/boot/dts/b4860qds.dts | 56 +++++++ arch/powerpc/boot/dts/b4qds.dtsi | 45 ++++++ arch/powerpc/boot/dts/p1023rdb.dts | 19 +++ arch/powerpc/boot/dts/p2041rdb.dts | 87 +++++++++++ arch/powerpc/boot/dts/p3041ds.dts | 138 +++++++++++++++++ arch/powerpc/boot/dts/p4080ds.dts | 178 ++++++++++++++++++++++ arch/powerpc/boot/dts/p5020ds.dts | 138 +++++++++++++++++ arch/powerpc/boot/dts/p5040ds.dts | 232 ++++++++++++++++++++++++++++ arch/powerpc/boot/dts/t4240qds.dts | 305 +++++++++++++++++++++++++++++++++++++ 9 files changed, 1198 insertions(+) diff --git a/arch/powerpc/boot/dts/b4860qds.dts b/arch/powerpc/boot/dts/b4860qds.dts index 6bb3707..d7daf44 100644 --- a/arch/powerpc/boot/dts/b4860qds.dts +++ b/arch/powerpc/boot/dts/b4860qds.dts @@ -39,12 +39,68 @@ model = "fsl,B4860QDS"; compatible = "fsl,B4860QDS"; + aliases { + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xaui_slot1 = &phy_xaui_slot1; + phy_xaui_slot2 = &phy_xaui_slot2; + }; + ifc: localbus@ffe124000 { board-control@3,0 { compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis"; }; }; + soc@ffe000000 { + fman@400000 { + ethernet@e8000 { + phy-handle = <&phy_sgmii_1e>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy_sgmii_1f>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { /* FM1@TGEC2 */ + phy-handle = <&phy_xaui_slot1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { /* FM1@TGEC1 */ + phy-handle = <&phy_xaui_slot2>; + phy-connection-type = "xgmii"; + }; + + mdio@fc000 { + phy_sgmii_1e: ethernet-phy@1e { + status = "disabled"; + reg = <0x1e>; + }; + phy_sgmii_1f: ethernet-phy@1f { + status = "disabled"; + reg = <0x1f>; + }; + }; + + mdio@fd000 { + /* For 10g interfaces */ + phy_xaui_slot1: xaui-phy@slot1 { + status = "disabled"; + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x7>; /* default switch setting on slot1 of AMC2PEX */ + }; + phy_xaui_slot2: xaui-phy@slot2 { + status = "disabled"; + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x6>; /* default switch setting on slot1 of AMC2PEX */ + }; + }; + }; + }; + rio: rapidio@ffe0c0000 { reg = <0xf 0xfe0c0000 0 0x11000>; diff --git a/arch/powerpc/boot/dts/b4qds.dtsi b/arch/powerpc/boot/dts/b4qds.dtsi index 8b47edc..6188583 100644 --- a/arch/powerpc/boot/dts/b4qds.dtsi +++ b/arch/powerpc/boot/dts/b4qds.dtsi @@ -39,6 +39,13 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + phy_sgmii_10 = &phy_sgmii_10; + phy_sgmii_11 = &phy_sgmii_11; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + }; + ifc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x2000>; ranges = <0 0 0xf 0xe8000000 0x08000000 @@ -160,6 +167,44 @@ phy_type = "ulpi"; }; + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_10>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_11>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_1c>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_sgmii_1d>; + phy-connection-type = "sgmii"; + }; + + mdio@fc000 { + phy_sgmii_10: ethernet-phy@10 { + reg = <0x10>; + }; + phy_sgmii_11: ethernet-phy@11 { + reg = <0x11>; + }; + phy_sgmii_1c: ethernet-phy@1c { + status = "disabled"; + reg = <0x1c>; + }; + phy_sgmii_1d: ethernet-phy@1d { + status = "disabled"; + reg = <0x1d>; + }; + }; + }; }; pci0: pcie@ffe200000 { diff --git a/arch/powerpc/boot/dts/p1023rdb.dts b/arch/powerpc/boot/dts/p1023rdb.dts index 0a06a88..d121bda 100644 --- a/arch/powerpc/boot/dts/p1023rdb.dts +++ b/arch/powerpc/boot/dts/p1023rdb.dts @@ -66,6 +66,25 @@ dr_mode = "host"; phy_type = "ulpi"; }; + + fman@100000 { + ethernet@e0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii"; + }; + ethernet@e2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii"; + }; + mdio@e1120 { + phy0: ethernet-phy@1 { + reg = <0x01>; + }; + phy1: ethernet-phy@2 { + reg = <0x02>; + }; + }; + }; }; lbc: localbus@ff605000 { diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts index d97ad74..1060716 100644 --- a/arch/powerpc/boot/dts/p2041rdb.dts +++ b/arch/powerpc/boot/dts/p2041rdb.dts @@ -41,6 +41,19 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_2 = &phy_sgmii_2; + phy_sgmii_3 = &phy_sgmii_3; + phy_sgmii_4 = &phy_sgmii_4; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xgmii_2 = &phy_xgmii_2; + }; + memory { device_type = "memory"; }; @@ -110,6 +123,80 @@ usb1: usb@211000 { dr_mode = "host"; }; + + fman@400000{ + ethernet@e0000 { + phy-handle = <&phy_sgmii_2>; + phy-connection-type = "sgmii"; + }; + + mdio@e1120 { + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + phy_sgmii_2: ethernet-phy@2 { + reg = <0x2>; + }; + phy_sgmii_3: ethernet-phy@3 { + reg = <0x3>; + }; + phy_sgmii_4: ethernet-phy@4 { + reg = <0x4>; + }; + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_3>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_4>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + /* + * phy-handle will be updated by U-Boot to + * reflect the actual slot the XAUI card is in. + */ + phy-handle = <&phy_xgmii_2>; + phy-connection-type = "xgmii"; + }; + + mdio@f1000 { + /* XAUI card in slot 2 */ + phy_xgmii_2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + }; }; rio: rapidio@ffe0c0000 { diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts index 2fed3bc..23670ea 100644 --- a/arch/powerpc/boot/dts/p3041ds.dts +++ b/arch/powerpc/boot/dts/p3041ds.dts @@ -49,6 +49,20 @@ ranges = <0x00000000 0xf 0x00000000 0x01008000>; }; + aliases{ + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xgmii_1 = &phy_xgmii_1; + phy_xgmii_2 = &phy_xgmii_2; + emi1_rgmii = &hydra_mdio_rgmii; + emi1_sgmii = &hydra_mdio_sgmii; + emi2_xgmii = &hydra_mdio_xgmii; + }; + soc: soc@ffe000000 { ranges = <0x00000000 0xf 0xfe000000 0x1000000>; reg = <0xf 0xfe000000 0 0x00001000>; @@ -103,6 +117,69 @@ reg = <0x4c>; }; }; + + fman@400000{ + ethernet@e0000 { + phy-handle = <&phy_sgmii_1c>; + phy-connection-type = "sgmii"; + }; + + mdio0: mdio@e1120 { + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_1d>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_1e>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_sgmii_1f>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + /* + * phy-handle will be updated by U-Boot to + * reflect the actual slot the XAUI card is in. + */ + phy-handle = <&phy_xgmii_1>; + phy-connection-type = "xgmii"; + }; + + /* + * We only support one XAUI card, so the MDIO muxing + * is set by U-Boot, and Linux never touches it. + * Therefore, we don't need a virtual MDIO node. + * However, the phy address depends on the slot, so + * only one of the ethernet-phy nodes below will be + * used. + */ + hydra_mdio_xgmii: mdio@f1000 { + status = "disabled"; + + /* XAUI card in slot 1 */ + phy_xgmii_1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + /* XAUI card in slot 2 */ + phy_xgmii_2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + }; }; rio: rapidio@ffe0c0000 { @@ -168,8 +245,69 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis"; reg = <3 0 0x30>; + ranges = <0 3 0 0x30>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + /* BRDCFG1 */ + reg = <9 1>; + /* EMI1 */ + mux-mask = <0x78>; + + /* + * Virtual MDIO for the two on-board RGMII + * ports. The reg property is already correct. + */ + hydra_mdio_rgmii: rgmii-mdio@8 { + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + reg = <8>; /* EMI1_EN | 0 */ + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + /* + * Virtual MDIO for the four-port SGMII card. + * The reg property will be fixed-up + * by U-Boot based on the slot that + * the SGMII card is in. + * + * Note: we do not support DTSEC5 connected to + * SGMII, so this is the only SGMII node. + */ + hydra_mdio_sgmii: sgmii-mdio@28 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x28>; /* EMI1_EN | 0x20 */ + status = "disabled"; + + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; }; }; diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts index 1cf6148..84256cd 100644 --- a/arch/powerpc/boot/dts/p4080ds.dts +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -41,6 +41,20 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + phy_rgmii = &phyrgmii; + phy5_slot3 = &phy5slot3; + phy6_slot3 = &phy6slot3; + phy7_slot3 = &phy7slot3; + phy8_slot3 = &phy8slot3; + emi1_slot3 = &p4080mdio2; + emi1_slot4 = &p4080mdio1; + emi1_slot5 = &p4080mdio3; + emi1_rgmii = &p4080mdio0; + emi2_slot4 = &p4080xmdio1; + emi2_slot5 = &p4080xmdio3; + }; + memory { device_type = "memory"; }; @@ -110,6 +124,65 @@ dr_mode = "host"; phy_type = "ulpi"; }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + }; + + mdio0: mdio@e1120 { + }; + + ethernet@e2000 { + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy2>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy10>; + phy-connection-type = "xgmii"; + }; + xmdio0: mdio@f1000 { + }; + }; + + fman@500000 { + ethernet@e0000 { + phy-handle = <&phy5>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy6>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy7>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy8>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy11>; + phy-connection-type = "xgmii"; + }; + }; }; rio: rapidio@ffe0c0000 { @@ -186,6 +259,111 @@ }; }; + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-gpio"; + gpios = <&gpio0 1 0>, <&gpio0 0 0>; + mdio-parent-bus = <&mdio0>; + + p4080mdio0: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + phyrgmii: ethernet-phy@0 { + reg = <0x0>; + }; + }; + + p4080mdio1: mdio@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + phy5: ethernet-phy@1c { + reg = <0x1c>; + }; + phy6: ethernet-phy@1d { + reg = <0x1d>; + }; + phy7: ethernet-phy@1e { + reg = <0x1e>; + }; + phy8: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + p4080mdio2: mdio@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + status = "disabled"; + + phy5slot3: ethernet-phy@1c { + reg = <0x1c>; + }; + phy6slot3: ethernet-phy@1d { + reg = <0x1d>; + }; + phy7slot3: ethernet-phy@1e { + reg = <0x1e>; + }; + phy8slot3: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + p4080mdio3: mdio@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + phy0: ethernet-phy@1c { + reg = <0x1c>; + }; + phy1: ethernet-phy@1d { + reg = <0x1d>; + }; + phy2: ethernet-phy@1e { + reg = <0x1e>; + }; + phy3: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + + mdio-mux-emi2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-gpio"; + gpios = <&gpio0 3 0>, <&gpio0 2 0>; + mdio-parent-bus = <&xmdio0>; + + p4080xmdio1: mdio@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + phy11: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + + p4080xmdio3: mdio@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + phy10: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + }; + }; }; /include/ "fsl/p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts index 2869fea..97590d8 100644 --- a/arch/powerpc/boot/dts/p5020ds.dts +++ b/arch/powerpc/boot/dts/p5020ds.dts @@ -41,6 +41,20 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xgmii_1 = &phy_xgmii_1; + phy_xgmii_2 = &phy_xgmii_2; + emi1_rgmii = &hydra_mdio_rgmii; + emi1_sgmii = &hydra_mdio_sgmii; + emi2_xgmii = &hydra_mdio_xgmii; + }; + memory { device_type = "memory"; }; @@ -103,6 +117,69 @@ reg = <0x4c>; }; }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_1c>; + phy-connection-type = "sgmii"; + }; + + mdio0: mdio@e1120 { + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_1d>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_1e>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_sgmii_1f>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + /* + * phy-handle will be updated by U-Boot to + * reflect the actual slot the XAUI card is in. + */ + phy-handle = <&phy_xgmii_1>; + phy-connection-type = "xgmii"; + }; + + /* + * We only support one XAUI card, so the MDIO muxing + * is set by U-Boot, and Linux never touches it. + * Therefore, we don't need a virtual MDIO node. + * However, the phy address depends on the slot, so + * only one of the ethernet-phy nodes below will be + * used. + */ + hydra_mdio_xgmii: mdio@f1000 { + status = "disabled"; + + /* XAUI card in slot 1 */ + phy_xgmii_1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + /* XAUI card in slot 2 */ + phy_xgmii_2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + }; + }; }; rio: rapidio@ffe0c0000 { @@ -168,8 +245,69 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; reg = <3 0 0x30>; + ranges = <0 3 0 0x30>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + /* BRDCFG1 */ + reg = <9 1>; + /* EMI1 */ + mux-mask = <0x78>; + + /* + * Virtual MDIO for the two on-board RGMII + * ports. The reg property is already correct + */ + hydra_mdio_rgmii: rgmii-mdio@8 { + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + reg = <8>; /* EMI1_EN | 0 */ + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + /* + * Virtual MDIO for the four-port SGMII card. + * The reg property will be fixed-up + * by U-Boot based on the slot that + * the SGMII card is in. + * + * Note: we do not support DTSEC5 connected to + * SGMII, so this is the only SGMII node. + */ + hydra_mdio_sgmii: sgmii-mdio@28 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x28>; /* EMI1_EN | 0x20 */ + status = "disabled"; + + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; }; }; diff --git a/arch/powerpc/boot/dts/p5040ds.dts b/arch/powerpc/boot/dts/p5040ds.dts index 860b5cc..0c8c817 100644 --- a/arch/powerpc/boot/dts/p5040ds.dts +++ b/arch/powerpc/boot/dts/p5040ds.dts @@ -45,6 +45,34 @@ device_type = "memory"; }; + aliases{ + phy_sgmii_slot2_1c = &phy_sgmii_slot2_1c; + phy_sgmii_slot2_1d = &phy_sgmii_slot2_1d; + phy_sgmii_slot2_1e = &phy_sgmii_slot2_1e; + phy_sgmii_slot2_1f = &phy_sgmii_slot2_1f; + phy_sgmii_slot3_1c = &phy_sgmii_slot3_1c; + phy_sgmii_slot3_1d = &phy_sgmii_slot3_1d; + phy_sgmii_slot3_1e = &phy_sgmii_slot3_1e; + phy_sgmii_slot3_1f = &phy_sgmii_slot3_1f; + phy_sgmii_slot5_1c = &phy_sgmii_slot5_1c; + phy_sgmii_slot5_1d = &phy_sgmii_slot5_1d; + phy_sgmii_slot5_1e = &phy_sgmii_slot5_1e; + phy_sgmii_slot5_1f = &phy_sgmii_slot5_1f; + phy_sgmii_slot6_1c = &phy_sgmii_slot6_1c; + phy_sgmii_slot6_1d = &phy_sgmii_slot6_1d; + phy_sgmii_slot6_1e = &phy_sgmii_slot6_1e; + phy_sgmii_slot6_1f = &phy_sgmii_slot6_1f; + phy_xgmii_slot_1 = &phy_xgmii_slot_1; + phy_xgmii_slot_2 = &phy_xgmii_slot_2; + hydra_rg = &hydra_rg; + hydra_sg_slot2 = &hydra_sg_slot2; + hydra_sg_slot3 = &hydra_sg_slot3; + hydra_sg_slot5 = &hydra_sg_slot5; + hydra_sg_slot6 = &hydra_sg_slot6; + hydra_xg_slot1 = &hydra_xg_slot1; + hydra_xg_slot2 = &hydra_xg_slot2; + }; + dcsr: dcsr@f00000000 { ranges = <0x00000000 0xf 0x00000000 0x01008000>; }; @@ -100,6 +128,68 @@ reg = <0x4c>; }; }; + + fman@400000 { + ethernet@e0000 { + phy-connection-type = "sgmii"; + }; + + mdio0: mdio@e1120 { + }; + + ethernet@e2000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xgmii_slot_2>; + phy-connection-type = "xgmii"; + }; + + xmdio0: mdio@f1000 { + }; + }; + + fman@500000 { + ethernet@e0000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&phy_xgmii_slot_1>; + phy-connection-type = "xgmii"; + }; + }; }; lbc: localbus@ffe124000 { @@ -153,8 +243,150 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis"; reg = <3 0 0x40>; + ranges = <0 3 0 0x40>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + /* BRDCFG1 */ + reg = <9 1>; + /* EMI1 */ + mux-mask = <0x78>; + /* + * Virtual MDIO for the two on-board RGMII + * ports. The reg property is already correct + */ + hydra_rg:rgmii-mdio@8 { + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + reg = <8>; /* EMI1_EN | 0 */ + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + /* Virtual MDIO for the four-port SGMII cards */ + hydra_sg_slot2: sgmii-mdio@28 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x28>; /* EMI1_EN | 0x20 */ + status = "disabled"; + + phy_sgmii_slot2_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_slot2_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_slot2_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_slot2_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + hydra_sg_slot3: sgmii-mdio@68 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x68>; /* EMI1_EN | 0x60 */ + status = "disabled"; + + phy_sgmii_slot3_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_slot3_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_slot3_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_slot3_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + hydra_sg_slot5: sgmii-mdio@38 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; /* EMI1_EN | 0x30 */ + status = "disabled"; + + phy_sgmii_slot5_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_slot5_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_slot5_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_slot5_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + hydra_sg_slot6: sgmii-mdio@48 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x48>; /* EMI1_EN | 0x40 */ + status = "disabled"; + + phy_sgmii_slot6_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_slot6_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_slot6_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_slot6_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + + mdio-mux-emi2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&xmdio0>; + reg = <9 1>; /* BRDCFG1 */ + mux-mask = <0x06>; /* EMI2 */ + + /* FM2 10GEC1 is always on slot 1 */ + hydra_xg_slot1: hydra-xg-slot1@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + status = "disabled"; + + phy_xgmii_slot_1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + + /* FM1 10GEC1 is always on slot 2 */ + hydra_xg_slot2: hydra-xg-slot2@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + phy_xgmii_slot_2: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + }; + }; }; }; diff --git a/arch/powerpc/boot/dts/t4240qds.dts b/arch/powerpc/boot/dts/t4240qds.dts index 97683f6..dd9d25b 100644 --- a/arch/powerpc/boot/dts/t4240qds.dts +++ b/arch/powerpc/boot/dts/t4240qds.dts @@ -41,6 +41,36 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases{ + phy_rgmii1 = &phyrgmii1; + phy_rgmii2 = &phyrgmii2; + phy_sgmii3 = &phy3; + phy_sgmii4 = &phy4; + phy_sgmii11 = &phy11; + phy_sgmii12 = &phy12; + sgmii_phy11 = &sgmiiphy11; + sgmii_phy12 = &sgmiiphy12; + sgmii_phy13 = &sgmiiphy13; + sgmii_phy14 = &sgmiiphy14; + sgmii_phy21 = &sgmiiphy21; + sgmii_phy22 = &sgmiiphy22; + sgmii_phy23 = &sgmiiphy23; + sgmii_phy24 = &sgmiiphy24; + sgmii_phy31 = &sgmiiphy31; + sgmii_phy32 = &sgmiiphy32; + sgmii_phy33 = &sgmiiphy33; + sgmii_phy34 = &sgmiiphy34; + sgmii_phy41 = &sgmiiphy41; + sgmii_phy42 = &sgmiiphy42; + sgmii_phy43 = &sgmiiphy43; + sgmii_phy44 = &sgmiiphy44; + emi1_rgmii = &t4240mdio0; + emi1_slot1 = &t4240mdio1; + emi1_slot2 = &t4240mdio2; + emi1_slot3 = &t4240mdio3; + emi1_slot4 = &t4240mdio4; + }; + ifc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x2000>; ranges = <0 0 0xf 0xe8000000 0x08000000 @@ -91,8 +121,166 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis"; reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + + mdio-mux-emi1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + reg = <0x54 1>; /* BRDCFG1 */ + mux-mask = <0xe0>; /* EMI1 */ + + /* Onboard PHYs */ + t4240mdio0: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + phyrgmii1: ethernet-phy@1 { /* FM2.5 */ + reg = <0x1>; + }; + phyrgmii2: ethernet-phy@2 { /* FM1.5 */ + reg = <0x2>; + }; + }; + + /* Slot 1 */ + t4240mdio1: mdio@20 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x20>; + status = "disabled"; + + phy1: ethernet-phy@0 { + reg = <0x0>; + }; + phy2: ethernet-phy@1 { + reg = <0x1>; + }; + phy3: ethernet-phy@2 { + reg = <0x2>; + }; + phy4: ethernet-phy@3 { + reg = <0x3>; + }; + sgmiiphy11: ethernet-phy@1c { + reg = <0x1c>; + }; + sgmiiphy12: ethernet-phy@1d { + reg = <0x1d>; + }; + sgmiiphy13: ethernet-phy@1e { + reg = <0x1e>; + }; + sgmiiphy14: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + /* Slot 2 */ + t4240mdio2: mdio@40 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40>; + status = "disabled"; + + phy5: ethernet-phy@4 { + reg = <0x4>; + }; + phy6: ethernet-phy@5 { + reg = <0x5>; + }; + phy7: ethernet-phy@6 { + reg = <0x6>; + }; + phy8: ethernet-phy@7 { + reg = <0x7>; + }; + sgmiiphy21: ethernet-phy@1c { + reg = <0x1c>; + }; + sgmiiphy22: ethernet-phy@1d { + reg = <0x1d>; + }; + sgmiiphy23: ethernet-phy@1e { + reg = <0x1e>; + }; + sgmiiphy24: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + /* Slot 3 */ + t4240mdio3: mdio@60 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + status = "disabled"; + + phy9: ethernet-phy@8 { + reg = <0x8>; + }; + phy10: ethernet-phy@9 { + reg = <0x9>; + }; + phy11: ethernet-phy@a { + reg = <0xa>; + }; + phy12: ethernet-phy@b { + reg = <0xb>; + }; + sgmiiphy31: ethernet-phy@1c { + reg = <0x1c>; + }; + sgmiiphy32: ethernet-phy@1d { + reg = <0x1d>; + }; + sgmiiphy33: ethernet-phy@1e { + reg = <0x1e>; + }; + sgmiiphy34: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + /* Slot 4 */ + t4240mdio4: mdio@80 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x80>; + status = "disabled"; + + phy13: ethernet-phy@c { + reg = <0xc>; + }; + phy14: ethernet-phy@d { + reg = <0xd>; + }; + phy15: ethernet-phy@e { + reg = <0xe>; + }; + phy16: ethernet-phy@f { + reg = <0xf>; + }; + sgmiiphy41: ethernet-phy@1c { + reg = <0x1c>; + }; + sgmiiphy42: ethernet-phy@1d { + reg = <0x1d>; + }; + sgmiiphy43: ethernet-phy@1e { + reg = <0x1e>; + }; + sgmiiphy44: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; }; }; @@ -207,6 +395,123 @@ sdhc@114000 { voltage-ranges = <1800 1800 3300 3300>; }; + + fman@400000 { + ethernet@e0000 { + phy-handle = <&phy5>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy6>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy7>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy8>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phyrgmii2>; + phy-connection-type = "rgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy2>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { /* FM1@TSEC9/FM1@TGEC1 */ + phy-handle = <&xauiphy1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { /* FM1@TSEC10/FM1@TGEC2 */ + phy-handle = <&xauiphy2>; + phy-connection-type = "xgmii"; + }; + + mdio@fc000 { + status = "disabled"; + }; + + mdio@fd000 { + status = "disabled"; + }; + }; + + fman@500000 { + ethernet@e0000 { + phy-handle = <&phy13>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy14>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy15>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy16>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phyrgmii1>; + phy-connection-type = "rgmii"; + }; + + ethernet@ea000 { + phy-handle = <&phy10>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { /* FM2@TSEC9/FM2@TGEC1 */ + phy-handle = <&xauiphy3>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { /* FM2@TSEC10/FM2@TGEC2 */ + phy-handle = <&xauiphy4>; + phy-connection-type = "xgmii"; + }; + + mdio0: mdio@fc000 { + }; + + mdio@fd000 { + xauiphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + + xauiphy2: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + xauiphy3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + xauiphy4: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; + }; + }; }; pci0: pcie@ffe240000 { -- 1.8.3.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s) 2014-07-16 20:17 ` [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board " Shruti Kanetkar @ 2014-07-21 22:45 ` Scott Wood 2014-07-28 6:51 ` Emil Medve 0 siblings, 1 reply; 23+ messages in thread From: Scott Wood @ 2014-07-21 22:45 UTC (permalink / raw) To: Shruti Kanetkar; +Cc: linuxppc-dev On Wed, 2014-07-16 at 15:17 -0500, Shruti Kanetkar wrote: > Based on prior work by Andy Fleming <afleming@gmail.com> > > Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> > --- What changed from v2? > + mdio@fc000 { > + phy_sgmii_1e: ethernet-phy@1e { > + status = "disabled"; > + reg = <0x1e>; > + }; Whitespace > + phy_sgmii_1f: ethernet-phy@1f { > + status = "disabled"; > + reg = <0x1f>; > + }; > + }; > + > + mdio@fd000 { > + /* For 10g interfaces */ > + phy_xaui_slot1: xaui-phy@slot1 { > + status = "disabled"; > + compatible = "ethernet-phy-ieee802.3-c45"; > + reg = <0x7>; /* default switch setting on slot1 of AMC2PEX */ > + }; Why xaui-phy and not ethernet-phy? As for the device_type discussion from v1, there is a generic binding that says device_type "should" be ethernet-phy. BTW, that binding (net/phy.txt) could use some cleaning up -- it still has references to things like linux,phandle. > diff --git a/arch/powerpc/boot/dts/b4qds.dtsi b/arch/powerpc/boot/dts/b4qds.dtsi > index 8b47edc..6188583 100644 > --- a/arch/powerpc/boot/dts/b4qds.dtsi > +++ b/arch/powerpc/boot/dts/b4qds.dtsi > @@ -39,6 +39,13 @@ > #size-cells = <2>; > interrupt-parent = <&mpic>; > > + aliases { > + phy_sgmii_10 = &phy_sgmii_10; > + phy_sgmii_11 = &phy_sgmii_11; > + phy_sgmii_1c = &phy_sgmii_1c; > + phy_sgmii_1d = &phy_sgmii_1d; > + }; Is the encoding of these alias strings considered ABI (for either the OS's use or U-Boot's)? If so, please document it. If not, how do you see this being used? What does the hex number mean from the user's perspective? > + mdio0: mdio@fc000 { > + }; Why is the empty node needed? -Scott ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s) 2014-07-21 22:45 ` Scott Wood @ 2014-07-28 6:51 ` Emil Medve 2014-07-29 19:58 ` Scott Wood 0 siblings, 1 reply; 23+ messages in thread From: Emil Medve @ 2014-07-28 6:51 UTC (permalink / raw) To: linuxppc-dev Hello Scott, Scott Wood <scottwood <at> freescale.com> writes: > On Wed, 2014-07-16 at 15:17 -0500, Shruti Kanetkar wrote: > > + mdio <at> fd000 { > > + /* For 10g interfaces */ > > + phy_xaui_slot1: xaui-phy <at> slot1 { > > + status = "disabled"; > > + compatible = "ethernet-phy-ieee802.3-c45"; > > + reg = <0x7>; /* default switch setting on slot1 of AMC2PEX */ > > + }; > > Why xaui-phy and not ethernet-phy? > > As for the device_type discussion from v1, there is a generic binding > that says device_type "should" be ethernet-phy. I have no strong feelings about this and we can use ethernet-phy, but: 1. The binding is old/stale (?) as it still uses device_type and the kernel doesn't seem to use anymore the device_type for PHY(s) 2. The binding asks "ethernet-phy" for the device_type property, not for the name. As such TBI PHY(s) use (upstream) the tbi-phy@ node name > BTW, that binding > (net/phy.txt) could use some cleaning up -- it still has references to > things like linux,phandle. > > > diff --git a/arch/powerpc/boot/dts/b4qds.dtsi b/arch/powerpc/boot/dts/b4qds.dtsi > > index 8b47edc..6188583 100644 > > --- a/arch/powerpc/boot/dts/b4qds.dtsi > > +++ b/arch/powerpc/boot/dts/b4qds.dtsi > > <at> <at> -39,6 +39,13 <at> <at> > > #size-cells = <2>; > > interrupt-parent = <&mpic>; > > > > + aliases { > > + phy_sgmii_10 = &phy_sgmii_10; > > + phy_sgmii_11 = &phy_sgmii_11; > > + phy_sgmii_1c = &phy_sgmii_1c; > > + phy_sgmii_1d = &phy_sgmii_1d; > > + }; > > Is the encoding of these alias strings considered ABI (for either the > OS's use or U-Boot's)? U-Boot uses these aliases > If so, please document it. Will do > If not, how do you > see this being used? What does the hex number mean from the user's > perspective? > > > + mdio0: mdio <at> fc000 { > > + }; > > Why is the empty node needed? For the label Cheers, ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s) 2014-07-28 6:51 ` Emil Medve @ 2014-07-29 19:58 ` Scott Wood 2014-07-30 21:52 ` Emil Medve 0 siblings, 1 reply; 23+ messages in thread From: Scott Wood @ 2014-07-29 19:58 UTC (permalink / raw) To: Emil Medve; +Cc: linuxppc-dev On Mon, 2014-07-28 at 06:51 +0000, Emil Medve wrote: > Hello Scott, > > > Scott Wood <scottwood <at> freescale.com> writes: > > On Wed, 2014-07-16 at 15:17 -0500, Shruti Kanetkar wrote: > > > + mdio <at> fd000 { > > > + /* For 10g interfaces */ > > > + phy_xaui_slot1: xaui-phy <at> slot1 { > > > + status = "disabled"; > > > + compatible = "ethernet-phy-ieee802.3-c45"; > > > + reg = <0x7>; /* default switch setting on slot1 of AMC2PEX */ > > > + }; > > > > Why xaui-phy and not ethernet-phy? > > > > As for the device_type discussion from v1, there is a generic binding > > that says device_type "should" be ethernet-phy. > > I have no strong feelings about this and we can use ethernet-phy, but: > > 1. The binding is old/stale (?) as it still uses device_type and the kernel > doesn't seem to use anymore the device_type for PHY(s) Yes. > 2. The binding asks "ethernet-phy" for the device_type property, not for the > name. As such TBI PHY(s) use (upstream) the tbi-phy@ node name It shows ethernet-phy as the name in the example. ePAPR urges generic node names (this was also a recommendation for IEEE1275), and has ethernet-phy on the preferred list. Is a xaui-phy not an ethernet phy? > > > + mdio0: mdio <at> fc000 { > > > + }; > > > > Why is the empty node needed? > > For the label For mdio-parent-bus, or is there some other dts layer that makes this node non-empty? -Scott ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s) 2014-07-29 19:58 ` Scott Wood @ 2014-07-30 21:52 ` Emil Medve 2014-07-31 2:30 ` Scott Wood 0 siblings, 1 reply; 23+ messages in thread From: Emil Medve @ 2014-07-30 21:52 UTC (permalink / raw) To: Scott Wood; +Cc: linuxppc-dev Hello Scott, On 07/29/2014 02:58 PM, Scott Wood wrote: > On Mon, 2014-07-28 at 06:51 +0000, Emil Medve wrote: >> Hello Scott, >> >> >> Scott Wood <scottwood <at> freescale.com> writes: >>> On Wed, 2014-07-16 at 15:17 -0500, Shruti Kanetkar wrote: >>>> + mdio <at> fd000 { >>>> + /* For 10g interfaces */ >>>> + phy_xaui_slot1: xaui-phy <at> slot1 { >>>> + status = "disabled"; >>>> + compatible = "ethernet-phy-ieee802.3-c45"; >>>> + reg = <0x7>; /* default switch setting on slot1 of AMC2PEX */ >>>> + }; >>> >>> Why xaui-phy and not ethernet-phy? >>> >>> As for the device_type discussion from v1, there is a generic binding >>> that says device_type "should" be ethernet-phy. >> >> I have no strong feelings about this and we can use ethernet-phy, but: >> >> 1. The binding is old/stale (?) as it still uses device_type and the kernel >> doesn't seem to use anymore the device_type for PHY(s) > > Yes. > >> 2. The binding asks "ethernet-phy" for the device_type property, not for the >> name. As such TBI PHY(s) use (upstream) the tbi-phy@ node name > > It shows ethernet-phy as the name in the example. ePAPR urges generic > node names (this was also a recommendation for IEEE1275), and has > ethernet-phy on the preferred list. Is a xaui-phy not an ethernet phy? So you thinking somebody should cleanup all the sgmii-phy and tbi-phy node names, huh? It seems that a number of tbi-phy instances slipped by you: 1be62c6 powerpc/mpc85xx: Add BSC9132 QDS Support bf57aeb powerpc/85xx: add the P1020RDB-PD DTS support 8a6be2b powerpc/85xx: Add TWR-P1025 board support >>>> + mdio0: mdio <at> fc000 { >>>> + }; >>> >>> Why is the empty node needed? >> >> For the label > > For mdio-parent-bus, or is there some other dts layer that makes this > node non-empty? 'powerpc/corenet: Create the dts components for the DPAA FMan' - http://patchwork.ozlabs.org/patch/370872 and 'powerpc/corenet: Add DPAA FMan support to the SoC device tree(s)' - http://patchwork.ozlabs.org/patch/370868 add content to said node Cheers, ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s) 2014-07-30 21:52 ` Emil Medve @ 2014-07-31 2:30 ` Scott Wood 2014-07-31 4:35 ` Emil Medve 0 siblings, 1 reply; 23+ messages in thread From: Scott Wood @ 2014-07-31 2:30 UTC (permalink / raw) To: Emil Medve; +Cc: linuxppc-dev On Wed, 2014-07-30 at 16:52 -0500, Emil Medve wrote: > Hello Scott, > > > On 07/29/2014 02:58 PM, Scott Wood wrote: > > On Mon, 2014-07-28 at 06:51 +0000, Emil Medve wrote: > >> Hello Scott, > >> > >> > >> Scott Wood <scottwood <at> freescale.com> writes: > >>> On Wed, 2014-07-16 at 15:17 -0500, Shruti Kanetkar wrote: > >>>> + mdio <at> fd000 { > >>>> + /* For 10g interfaces */ > >>>> + phy_xaui_slot1: xaui-phy <at> slot1 { > >>>> + status = "disabled"; > >>>> + compatible = "ethernet-phy-ieee802.3-c45"; > >>>> + reg = <0x7>; /* default switch setting on slot1 of AMC2PEX */ > >>>> + }; > >>> > >>> Why xaui-phy and not ethernet-phy? > >>> > >>> As for the device_type discussion from v1, there is a generic binding > >>> that says device_type "should" be ethernet-phy. > >> > >> I have no strong feelings about this and we can use ethernet-phy, but: > >> > >> 1. The binding is old/stale (?) as it still uses device_type and the kernel > >> doesn't seem to use anymore the device_type for PHY(s) > > > > Yes. > > > >> 2. The binding asks "ethernet-phy" for the device_type property, not for the > >> name. As such TBI PHY(s) use (upstream) the tbi-phy@ node name > > > > It shows ethernet-phy as the name in the example. ePAPR urges generic > > node names (this was also a recommendation for IEEE1275), and has > > ethernet-phy on the preferred list. Is a xaui-phy not an ethernet phy? > > So you thinking somebody should cleanup all the sgmii-phy and tbi-phy > node names, huh? No, I was just wondering why we're adding yet another name, and whether there's any value in it. > It seems that a number of tbi-phy instances slipped by you: > > 1be62c6 powerpc/mpc85xx: Add BSC9132 QDS Support > bf57aeb powerpc/85xx: add the P1020RDB-PD DTS support > 8a6be2b powerpc/85xx: Add TWR-P1025 board support tbi-phy is existing practice. xaui-phy isn't. > >>>> + mdio0: mdio <at> fc000 { > >>>> + }; > >>> > >>> Why is the empty node needed? > >> > >> For the label > > > > For mdio-parent-bus, or is there some other dts layer that makes this > > node non-empty? > > 'powerpc/corenet: Create the dts components for the DPAA FMan' - > http://patchwork.ozlabs.org/patch/370872 Why does this patch define the mdio0 label for mdio@e1120, but not define a label for any other node? > and 'powerpc/corenet: Add DPAA > FMan support to the SoC device tree(s)' - > http://patchwork.ozlabs.org/patch/370868 add content to said node This one adds content to some mdio nodes, none of which are mdio@fc000 or &mdio0. -Scott ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s) 2014-07-31 2:30 ` Scott Wood @ 2014-07-31 4:35 ` Emil Medve 2014-07-31 5:28 ` Scott Wood 0 siblings, 1 reply; 23+ messages in thread From: Emil Medve @ 2014-07-31 4:35 UTC (permalink / raw) To: Scott Wood; +Cc: linuxppc-dev Hello Scott, On 07/30/2014 09:30 PM, Scott Wood wrote: > On Wed, 2014-07-30 at 16:52 -0500, Emil Medve wrote: >> Hello Scott, >> >> >> On 07/29/2014 02:58 PM, Scott Wood wrote: >>> On Mon, 2014-07-28 at 06:51 +0000, Emil Medve wrote: >>>> Hello Scott, >>>> >>>> >>>> Scott Wood <scottwood <at> freescale.com> writes: >>>>> On Wed, 2014-07-16 at 15:17 -0500, Shruti Kanetkar wrote: >>>>>> + mdio <at> fd000 { >>>>>> + /* For 10g interfaces */ >>>>>> + phy_xaui_slot1: xaui-phy <at> slot1 { >>>>>> + status = "disabled"; >>>>>> + compatible = "ethernet-phy-ieee802.3-c45"; >>>>>> + reg = <0x7>; /* default switch setting on slot1 of AMC2PEX */ >>>>>> + }; >>>>> >>>>> Why xaui-phy and not ethernet-phy? >>>>> >>>>> As for the device_type discussion from v1, there is a generic binding >>>>> that says device_type "should" be ethernet-phy. >>>> >>>> I have no strong feelings about this and we can use ethernet-phy, but: >>>> >>>> 1. The binding is old/stale (?) as it still uses device_type and the kernel >>>> doesn't seem to use anymore the device_type for PHY(s) >>> >>> Yes. >>> >>>> 2. The binding asks "ethernet-phy" for the device_type property, not for the >>>> name. As such TBI PHY(s) use (upstream) the tbi-phy@ node name >>> >>> It shows ethernet-phy as the name in the example. ePAPR urges generic >>> node names (this was also a recommendation for IEEE1275), and has >>> ethernet-phy on the preferred list. Is a xaui-phy not an ethernet phy? >> >> So you thinking somebody should cleanup all the sgmii-phy and tbi-phy >> node names, huh? > > No, I was just wondering why we're adding yet another name, and whether > there's any value in it. That's fair. We'll just use ethernet-phy >> It seems that a number of tbi-phy instances slipped by you: >> >> 1be62c6 powerpc/mpc85xx: Add BSC9132 QDS Support >> bf57aeb powerpc/85xx: add the P1020RDB-PD DTS support >> 8a6be2b powerpc/85xx: Add TWR-P1025 board support > > tbi-phy is existing practice. xaui-phy isn't. > >>>>>> + mdio0: mdio <at> fc000 { >>>>>> + }; >>>>> >>>>> Why is the empty node needed? >>>> >>>> For the label >>> >>> For mdio-parent-bus, or is there some other dts layer that makes this >>> node non-empty? >> >> 'powerpc/corenet: Create the dts components for the DPAA FMan' - >> http://patchwork.ozlabs.org/patch/370872 > > Why does this patch define the mdio0 label for mdio@e1120, but not > define a label for any other node? Only MDIO controllers that are pinned out have these labels. Only pinned out MDIO(s) are capable of controlling external PHY(s) via these board level MDIO buses >> and 'powerpc/corenet: Add DPAA >> FMan support to the SoC device tree(s)' - >> http://patchwork.ozlabs.org/patch/370868 add content to said node > > This one adds content to some mdio nodes, none of which are mdio@fc000 > or &mdio0. This patch adds the SoC level PHY(s), which in this case are just TBI PHY(s): i.e. no FMan v2 10 Gb/s MDIO or FMan v3 standalone MDIO devices. Also the labels become relevant only at board level to connect the MDIO buses to their corresponding MDIO controllers Cheers, ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s) 2014-07-31 4:35 ` Emil Medve @ 2014-07-31 5:28 ` Scott Wood 2014-07-31 5:48 ` Emil Medve 0 siblings, 1 reply; 23+ messages in thread From: Scott Wood @ 2014-07-31 5:28 UTC (permalink / raw) To: Emil Medve; +Cc: linuxppc-dev On Wed, 2014-07-30 at 23:35 -0500, Emil Medve wrote: > Hello Scott, > > > On 07/30/2014 09:30 PM, Scott Wood wrote: > > On Wed, 2014-07-30 at 16:52 -0500, Emil Medve wrote: > >>>>>> + mdio0: mdio <at> fc000 { > >>>>>> + }; > >>>>> > >>>>> Why is the empty node needed? > >>>> > >>>> For the label > >>> > >>> For mdio-parent-bus, or is there some other dts layer that makes this > >>> node non-empty? > >> > >> 'powerpc/corenet: Create the dts components for the DPAA FMan' - > >> http://patchwork.ozlabs.org/patch/370872 > > > > Why does this patch define the mdio0 label for mdio@e1120, but not > > define a label for any other node? > > Only MDIO controllers that are pinned out have these labels. Only pinned > out MDIO(s) are capable of controlling external PHY(s) via these board > level MDIO buses Is there any reason to describe non-pinned-out MDIO controllers at all? Is the lack of pinning out inherent to the silicon, or is it board design/config? Is the answer different for different MDIO controllers? I'm just curious why mdio@e1120 is labelled in a non-board dtsi while others are labelled elsewhere. -Scott ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s) 2014-07-31 5:28 ` Scott Wood @ 2014-07-31 5:48 ` Emil Medve 2014-07-31 18:30 ` Scott Wood 0 siblings, 1 reply; 23+ messages in thread From: Emil Medve @ 2014-07-31 5:48 UTC (permalink / raw) To: Scott Wood; +Cc: linuxppc-dev Hello Scott, On 07/31/2014 12:28 AM, Scott Wood wrote: > On Wed, 2014-07-30 at 23:35 -0500, Emil Medve wrote: >> Hello Scott, >> >> >> On 07/30/2014 09:30 PM, Scott Wood wrote: >>> On Wed, 2014-07-30 at 16:52 -0500, Emil Medve wrote: >>>>>>>> + mdio0: mdio <at> fc000 { >>>>>>>> + }; >>>>>>> >>>>>>> Why is the empty node needed? >>>>>> >>>>>> For the label >>>>> >>>>> For mdio-parent-bus, or is there some other dts layer that makes this >>>>> node non-empty? >>>> >>>> 'powerpc/corenet: Create the dts components for the DPAA FMan' - >>>> http://patchwork.ozlabs.org/patch/370872 >>> >>> Why does this patch define the mdio0 label for mdio@e1120, but not >>> define a label for any other node? >> >> Only MDIO controllers that are pinned out have these labels. Only pinned >> out MDIO(s) are capable of controlling external PHY(s) via these board >> level MDIO buses > > Is there any reason to describe non-pinned-out MDIO controllers at all? Yes. For the internal TBI PHY(s). Each MAC supporting SGMII has a TBI PHY that is attached to the MDIO controller of the respective MAC > Is the lack of pinning out inherent to the silicon, or is it board > design/config? It's a silicon level decision > Is the answer different for different MDIO controllers? You mean non-FSL MDIO controllers? Dunno. All FSL SoC have the same MDIO pin-out decision > I'm just curious why mdio@e1120 is labelled in a non-board dtsi while > others are labelled elsewhere. Labels are relevant only in the context of 'powerpc/corenet: Add MDIO bus muxing support to the board device tree(s)' - http://patchwork.ozlabs.org/patch/370866. Most labels are created and used in the board .dts file except b4qds.dtsi which is shared between b4420qds.dts and b4860qds.dts Cheers, ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s) 2014-07-31 5:48 ` Emil Medve @ 2014-07-31 18:30 ` Scott Wood 2014-07-31 18:49 ` Emil Medve 2014-08-13 8:44 ` Shaohui Xie 0 siblings, 2 replies; 23+ messages in thread From: Scott Wood @ 2014-07-31 18:30 UTC (permalink / raw) To: Emil Medve; +Cc: linuxppc-dev On Thu, 2014-07-31 at 00:48 -0500, Emil Medve wrote: > Hello Scott, > > > On 07/31/2014 12:28 AM, Scott Wood wrote: > > On Wed, 2014-07-30 at 23:35 -0500, Emil Medve wrote: > >> Hello Scott, > >> > >> > >> On 07/30/2014 09:30 PM, Scott Wood wrote: > >>> On Wed, 2014-07-30 at 16:52 -0500, Emil Medve wrote: > >>>>>>>> + mdio0: mdio <at> fc000 { > >>>>>>>> + }; > >>>>>>> > >>>>>>> Why is the empty node needed? > >>>>>> > >>>>>> For the label > >>>>> > >>>>> For mdio-parent-bus, or is there some other dts layer that makes this > >>>>> node non-empty? > >>>> > >>>> 'powerpc/corenet: Create the dts components for the DPAA FMan' - > >>>> http://patchwork.ozlabs.org/patch/370872 > >>> > >>> Why does this patch define the mdio0 label for mdio@e1120, but not > >>> define a label for any other node? > >> > >> Only MDIO controllers that are pinned out have these labels. Only pinned > >> out MDIO(s) are capable of controlling external PHY(s) via these board > >> level MDIO buses > > > > Is there any reason to describe non-pinned-out MDIO controllers at all? > > Yes. For the internal TBI PHY(s). Each MAC supporting SGMII has a TBI > PHY that is attached to the MDIO controller of the respective MAC OK, so similar to eTSEC. I didn't know if you were counting aTBI connection as being (partially) pinned out. > > Is the lack of pinning out inherent to the silicon, or is it board > > design/config? > > It's a silicon level decision So why is it the board file that adds the label, if it's always going to be the same node? > > I'm just curious why mdio@e1120 is labelled in a non-board dtsi while > > others are labelled elsewhere. > > Labels are relevant only in the context of 'powerpc/corenet: Add MDIO > bus muxing support to the board device tree(s)' - > http://patchwork.ozlabs.org/patch/370866. Most labels are created and > used in the board .dts file except b4qds.dtsi which is shared between > b4420qds.dts and b4860qds.dts I'm talking about qoriq-fman-0-1g-0.dtsi, not b4qds.dtsi. It labels mdio@e1120 as mdio0. In other words, why is the decision on where to label made differently for fman v3 than for previous fman versions? -Scott ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s) 2014-07-31 18:30 ` Scott Wood @ 2014-07-31 18:49 ` Emil Medve 2014-08-13 8:44 ` Shaohui Xie 1 sibling, 0 replies; 23+ messages in thread From: Emil Medve @ 2014-07-31 18:49 UTC (permalink / raw) To: Scott Wood; +Cc: linuxppc-dev Hello Scott, On 07/31/2014 01:30 PM, Scott Wood wrote: > On Thu, 2014-07-31 at 00:48 -0500, Emil Medve wrote: >> Hello Scott, >> >> >> On 07/31/2014 12:28 AM, Scott Wood wrote: >>> On Wed, 2014-07-30 at 23:35 -0500, Emil Medve wrote: >>>> Hello Scott, >>>> >>>> >>>> On 07/30/2014 09:30 PM, Scott Wood wrote: >>>>> On Wed, 2014-07-30 at 16:52 -0500, Emil Medve wrote: >>>>>>>>>> + mdio0: mdio <at> fc000 { >>>>>>>>>> + }; >>>>>>>>> >>>>>>>>> Why is the empty node needed? >>>>>>>> >>>>>>>> For the label >>>>>>> >>>>>>> For mdio-parent-bus, or is there some other dts layer that makes this >>>>>>> node non-empty? >>>>>> >>>>>> 'powerpc/corenet: Create the dts components for the DPAA FMan' - >>>>>> http://patchwork.ozlabs.org/patch/370872 >>>>> >>>>> Why does this patch define the mdio0 label for mdio@e1120, but not >>>>> define a label for any other node? >>>> >>>> Only MDIO controllers that are pinned out have these labels. Only pinned >>>> out MDIO(s) are capable of controlling external PHY(s) via these board >>>> level MDIO buses >>> >>> Is there any reason to describe non-pinned-out MDIO controllers at all? >> >> Yes. For the internal TBI PHY(s). Each MAC supporting SGMII has a TBI >> PHY that is attached to the MDIO controller of the respective MAC > > OK, so similar to eTSEC. I didn't know if you were counting aTBI > connection as being (partially) pinned out. > >>> Is the lack of pinning out inherent to the silicon, or is it board >>> design/config? >> >> It's a silicon level decision > > So why is it the board file that adds the label, if it's always going to > be the same node? I guess we can move it >>> I'm just curious why mdio@e1120 is labelled in a non-board dtsi while >>> others are labelled elsewhere. >> >> Labels are relevant only in the context of 'powerpc/corenet: Add MDIO >> bus muxing support to the board device tree(s)' - >> http://patchwork.ozlabs.org/patch/370866. Most labels are created and >> used in the board .dts file except b4qds.dtsi which is shared between >> b4420qds.dts and b4860qds.dts > > I'm talking about qoriq-fman-0-1g-0.dtsi, not b4qds.dtsi. It labels > mdio@e1120 as mdio0. We missed that. Given the above, we'll leave it and remove it from the board files Cheers, > In other words, why is the decision on where to label made differently > for fman v3 than for previous fman versions? > > -Scott ^ permalink raw reply [flat|nested] 23+ messages in thread
* RE: [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board device tree(s) 2014-07-31 18:30 ` Scott Wood 2014-07-31 18:49 ` Emil Medve @ 2014-08-13 8:44 ` Shaohui Xie 1 sibling, 0 replies; 23+ messages in thread From: Shaohui Xie @ 2014-08-13 8:44 UTC (permalink / raw) To: Scott Wood, Emilian Medve; +Cc: linuxppc-dev PiAtLS0tLU9yaWdpbmFsIE1lc3NhZ2UtLS0tLQ0KPiBGcm9tOiBMaW51eHBwYy1kZXYgW21haWx0 bzpsaW51eHBwYy1kZXYtDQo+IGJvdW5jZXMrYjIxOTg5PWZyZWVzY2FsZS5jb21AbGlzdHMub3ps YWJzLm9yZ10gT24gQmVoYWxmIE9mIFNjb3R0IFdvb2QNCj4gU2VudDogRnJpZGF5LCBBdWd1c3Qg MDEsIDIwMTQgMjozMSBBTQ0KPiBUbzogTWVkdmUgRW1pbGlhbi1FTU1FRFZFMQ0KPiBDYzogbGlu dXhwcGMtZGV2QG96bGFicy5vcmcNCj4gU3ViamVjdDogUmU6IFtQQVRDSCB2MiA1LzddIHBvd2Vy cGMvY29yZW5ldDogQWRkIE1ESU8gYnVzIG11eGluZyBzdXBwb3J0DQo+IHRvIHRoZSBib2FyZCBk ZXZpY2UgdHJlZShzKQ0KPiANCj4gT24gVGh1LCAyMDE0LTA3LTMxIGF0IDAwOjQ4IC0wNTAwLCBF bWlsIE1lZHZlIHdyb3RlOg0KPiA+IEhlbGxvIFNjb3R0LA0KPiA+DQo+ID4NCj4gPiBPbiAwNy8z MS8yMDE0IDEyOjI4IEFNLCBTY290dCBXb29kIHdyb3RlOg0KPiA+ID4gT24gV2VkLCAyMDE0LTA3 LTMwIGF0IDIzOjM1IC0wNTAwLCBFbWlsIE1lZHZlIHdyb3RlOg0KPiA+ID4+IEhlbGxvIFNjb3R0 LA0KPiA+ID4+DQo+ID4gPj4NCj4gPiA+PiBPbiAwNy8zMC8yMDE0IDA5OjMwIFBNLCBTY290dCBX b29kIHdyb3RlOg0KPiA+ID4+PiBPbiBXZWQsIDIwMTQtMDctMzAgYXQgMTY6NTIgLTA1MDAsIEVt aWwgTWVkdmUgd3JvdGU6DQo+ID4gPj4+Pj4+Pj4gKwkJCW1kaW8wOiBtZGlvIDxhdD4gZmMwMDAg ew0KPiA+ID4+Pj4+Pj4+ICsJCQl9Ow0KPiA+ID4+Pj4+Pj4NCj4gPiA+Pj4+Pj4+IFdoeSBpcyB0 aGUgZW1wdHkgbm9kZSBuZWVkZWQ/DQo+ID4gPj4+Pj4+DQo+ID4gPj4+Pj4+IEZvciB0aGUgbGFi ZWwNCj4gPiA+Pj4+Pg0KPiA+ID4+Pj4+IEZvciBtZGlvLXBhcmVudC1idXMsIG9yIGlzIHRoZXJl IHNvbWUgb3RoZXIgZHRzIGxheWVyIHRoYXQgbWFrZXMNCj4gPiA+Pj4+PiB0aGlzIG5vZGUgbm9u LWVtcHR5Pw0KPiA+ID4+Pj4NCj4gPiA+Pj4+ICdwb3dlcnBjL2NvcmVuZXQ6IENyZWF0ZSB0aGUg ZHRzIGNvbXBvbmVudHMgZm9yIHRoZSBEUEFBIEZNYW4nIC0NCj4gPiA+Pj4+IGh0dHA6Ly9wYXRj aHdvcmsub3psYWJzLm9yZy9wYXRjaC8zNzA4NzINCj4gPiA+Pj4NCj4gPiA+Pj4gV2h5IGRvZXMg dGhpcyBwYXRjaCBkZWZpbmUgdGhlIG1kaW8wIGxhYmVsIGZvciBtZGlvQGUxMTIwLCBidXQgbm90 DQo+ID4gPj4+IGRlZmluZSBhIGxhYmVsIGZvciBhbnkgb3RoZXIgbm9kZT8NCj4gPiA+Pg0KPiA+ ID4+IE9ubHkgTURJTyBjb250cm9sbGVycyB0aGF0IGFyZSBwaW5uZWQgb3V0IGhhdmUgdGhlc2Ug bGFiZWxzLiBPbmx5DQo+ID4gPj4gcGlubmVkIG91dCBNRElPKHMpIGFyZSBjYXBhYmxlIG9mIGNv bnRyb2xsaW5nIGV4dGVybmFsIFBIWShzKSB2aWENCj4gPiA+PiB0aGVzZSBib2FyZCBsZXZlbCBN RElPIGJ1c2VzDQo+ID4gPg0KPiA+ID4gSXMgdGhlcmUgYW55IHJlYXNvbiB0byBkZXNjcmliZSBu b24tcGlubmVkLW91dCBNRElPIGNvbnRyb2xsZXJzIGF0DQo+IGFsbD8NCltTLkhdIFJlZ2FyZGlu ZyB0aGUgcGlubmVkLW91dCBNRElPIGNvbnRyb2xsZXJzIGFuZCBub24tcGlubmVkLW91dCBNRElP IGNvbnRyb2xsZXJzLA0KSG93IHRvIGRpZmZlcmVudGlhdGUgdGhlbT8NCg0KPiA+DQo+ID4gWWVz LiBGb3IgdGhlIGludGVybmFsIFRCSSBQSFkocykuIEVhY2ggTUFDIHN1cHBvcnRpbmcgU0dNSUkg aGFzIGEgVEJJDQo+ID4gUEhZIHRoYXQgaXMgYXR0YWNoZWQgdG8gdGhlIE1ESU8gY29udHJvbGxl ciBvZiB0aGUgcmVzcGVjdGl2ZSBNQUMNCj4gDQpbUy5IXSB0aGVyZSBhcmUgbXVsdGlwbGUgaW50 ZXJuYWwgUEhZcyBvbiBGbWFuLXYzIFNPQ3MuIEVhY2ggb25lIGlzIHVzZWQgZm9yDQpTcGVjaWZp YyBmdW5jdGlvbiwgZm9yIGV4LiBvbiBUNCB0aGVyZSBhcmUgWEZJLCBTR01JSSwgUVNHTUlJLg0K V2lsbCBhbGwgb2YgdGhlbSBiZSBsaXN0ZWQgaW4gdGhlIERUUz8gDQoNClRoYW5rcyENCg0KLVNo YW9odWkNCg== ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v2 6/7] powerpc/corenet: Enable muxing MDIO buses via GPIO 2014-07-16 20:17 [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shruti Kanetkar ` (3 preceding siblings ...) 2014-07-16 20:17 ` [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board " Shruti Kanetkar @ 2014-07-16 20:17 ` Shruti Kanetkar 2014-07-16 20:17 ` [PATCH v2 7/7] powerpc/corenet: Enable muxing MDIO buses via FPGA Shruti Kanetkar 2014-07-25 3:11 ` [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shaohui Xie 6 siblings, 0 replies; 23+ messages in thread From: Shruti Kanetkar @ 2014-07-16 20:17 UTC (permalink / raw) To: scottwood; +Cc: Andy Fleming, Shruti Kanetkar, linuxppc-dev, Shaohui Xie From: Andy Fleming <afleming@gmail.com> Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> --- arch/powerpc/configs/corenet32_smp_defconfig | 2 ++ arch/powerpc/configs/corenet64_smp_defconfig | 2 ++ arch/powerpc/platforms/85xx/corenet_generic.c | 3 +++ 3 files changed, 7 insertions(+) diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index 7d0c837..64dcd113 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -103,6 +103,8 @@ CONFIG_E1000E=y CONFIG_VITESSE_PHY=y CONFIG_AT803X_PHY=y CONFIG_FIXED_PHY=y +CONFIG_MDIO_BUS_MUX=y +CONFIG_MDIO_BUS_MUX_GPIO=y # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index 6ae07e1..7f25c4a 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -96,6 +96,8 @@ CONFIG_SATA_SIL24=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_E1000E=y +CONFIG_MDIO_BUS_MUX=y +CONFIG_MDIO_BUS_MUX_GPIO=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c index 4f22ad1..e5473bb 100644 --- a/arch/powerpc/platforms/85xx/corenet_generic.c +++ b/arch/powerpc/platforms/85xx/corenet_generic.c @@ -77,6 +77,9 @@ static const struct of_device_id of_device_ids[] = { .compatible = "simple-bus" }, { + .compatible = "mdio-mux-gpio" + }, + { .compatible = "fsl,srio", }, { -- 1.8.3.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v2 7/7] powerpc/corenet: Enable muxing MDIO buses via FPGA 2014-07-16 20:17 [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shruti Kanetkar ` (4 preceding siblings ...) 2014-07-16 20:17 ` [PATCH v2 6/7] powerpc/corenet: Enable muxing MDIO buses via GPIO Shruti Kanetkar @ 2014-07-16 20:17 ` Shruti Kanetkar 2014-07-25 3:11 ` [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shaohui Xie 6 siblings, 0 replies; 23+ messages in thread From: Shruti Kanetkar @ 2014-07-16 20:17 UTC (permalink / raw) To: scottwood; +Cc: Shruti Kanetkar, linuxppc-dev, Andy Fleming, Shaohui Xie Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> --- arch/powerpc/configs/corenet32_smp_defconfig | 1 + arch/powerpc/configs/corenet64_smp_defconfig | 1 + arch/powerpc/platforms/85xx/corenet_generic.c | 3 +++ 3 files changed, 5 insertions(+) diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index 64dcd113..9c62cac 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -105,6 +105,7 @@ CONFIG_AT803X_PHY=y CONFIG_FIXED_PHY=y CONFIG_MDIO_BUS_MUX=y CONFIG_MDIO_BUS_MUX_GPIO=y +CONFIG_MDIO_BUS_MUX_MMIOREG=y # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index 7f25c4a..d12cab5 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -99,6 +99,7 @@ CONFIG_E1000E=y CONFIG_MDIO_BUS_MUX=y CONFIG_MDIO_BUS_MUX_GPIO=y CONFIG_INPUT_FF_MEMLESS=m +CONFIG_MDIO_BUS_MUX_MMIOREG=y # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c index e5473bb..a0b50dd 100644 --- a/arch/powerpc/platforms/85xx/corenet_generic.c +++ b/arch/powerpc/platforms/85xx/corenet_generic.c @@ -80,6 +80,9 @@ static const struct of_device_id of_device_ids[] = { .compatible = "mdio-mux-gpio" }, { + .compatible = "fsl,fpga-ngpixis" + }, + { .compatible = "fsl,srio", }, { -- 1.8.3.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* RE: [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding 2014-07-16 20:17 [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shruti Kanetkar ` (5 preceding siblings ...) 2014-07-16 20:17 ` [PATCH v2 7/7] powerpc/corenet: Enable muxing MDIO buses via FPGA Shruti Kanetkar @ 2014-07-25 3:11 ` Shaohui Xie 2014-07-25 19:54 ` Scott Wood 2014-07-25 20:00 ` Emil Medve 6 siblings, 2 replies; 23+ messages in thread From: Shaohui Xie @ 2014-07-25 3:11 UTC (permalink / raw) To: Shruti Kanetkar, Scott Wood; +Cc: linuxppc-dev SGVsbG8sIFNjb3R0LCBTaHJ1dGksDQoNClRoZXJlIGFyZSB0d28gdHlwZXMgTURJTyBjb250cm9s bGVycywgZWFjaCBNQUMgaGFzIGEgY29ycmVzcG9uZGluZyBNRElPIGNvbnRyb2xsZXIgdG8gYWNj ZXNzIGludGVybmFsIFBIWXMgaW5zaWRlIFNlcmRlcywgYW5vdGhlciBpcyBkZWRpY2F0ZWQgTURJ TyBjb250cm9sbGVyIHRvIGFjY2VzcyBleHRlcm5hbCBQSFlzIChQSFlzIG9uIGJvYXJkIG9yIHJp c2VyIGNhcmQsIGV0YykuIEN1cnJlbnQgTURJTyBkcml2ZXIgZG9lcyBub3QgZGlzdGluZ3Vpc2gg dGhlIHR3byBjb250cm9sbGVycywgaWYgd2UgbmVlZCB0byBkaXN0aW5ndWlzaCB0aGUgY29udHJv bGxlcnMsIHdoYXQgY291bGQgYmUgdGhlIHByb3BlciB3YXk/IFBlcmhhcHMgYSBuZXcgcHJvcGVy dHkgaXMgbmVlZGVkIGluIGR0cz8NClBsZWFzZSBjb21tZW50IQ0KVGhhbmtzIQ0KDQpCZXN0IFJl Z2FyZHMsIA0KU2hhb2h1aSBYaWUNCj4gLS0tLS1PcmlnaW5hbCBNZXNzYWdlLS0tLS0NCj4gRnJv bTogTGludXhwcGMtZGV2IFttYWlsdG86bGludXhwcGMtZGV2LQ0KPiBib3VuY2VzK2IyMTk4OT1m cmVlc2NhbGUuY29tQGxpc3RzLm96bGFicy5vcmddIE9uIEJlaGFsZiBPZiBTaHJ1dGkNCj4gS2Fu ZXRrYXINCj4gU2VudDogVGh1cnNkYXksIEp1bHkgMTcsIDIwMTQgNDoxNyBBTQ0KPiBUbzogV29v ZCBTY290dC1CMDc0MjENCj4gQ2M6IEthbmV0a2FyIFNocnV0aS1CNDQ0NTQ7IGxpbnV4cHBjLWRl dkBsaXN0cy5vemxhYnMub3JnDQo+IFN1YmplY3Q6IFtQQVRDSCB2MiAxLzddIGR0OiBJbnRyb2R1 Y2UgdGhlIEZNYW4gMTAgR2IvcyBNRElPIGJpbmRpbmcNCj4gDQo+IFRoaXMgZG9jdW1lbnQgY292 ZXJzIEZNYW52MiBhbmQgRk1hbnYzIG1FTUFDIE1ESU8NCj4gDQo+IFNpZ25lZC1vZmYtYnk6IFNo cnV0aSBLYW5ldGthciA8U2hydXRpQEZyZWVzY2FsZS5jb20+DQo+IC0tLQ0KPiAgLi4uL2Rldmlj ZXRyZWUvYmluZGluZ3MvbmV0L2ZzbC14Z21hYy1waHkudHh0ICAgICAgfCAyOQ0KPiArKysrKysr KysrKysrKysrKysrKysrDQo+ICAxIGZpbGUgY2hhbmdlZCwgMjkgaW5zZXJ0aW9ucygrKQ0KPiAg Y3JlYXRlIG1vZGUgMTAwNjQ0IERvY3VtZW50YXRpb24vZGV2aWNldHJlZS9iaW5kaW5ncy9uZXQv ZnNsLXhnbWFjLQ0KPiBwaHkudHh0DQo+IA0KPiBkaWZmIC0tZ2l0IGEvRG9jdW1lbnRhdGlvbi9k ZXZpY2V0cmVlL2JpbmRpbmdzL25ldC9mc2wteGdtYWMtcGh5LnR4dA0KPiBiL0RvY3VtZW50YXRp b24vZGV2aWNldHJlZS9iaW5kaW5ncy9uZXQvZnNsLXhnbWFjLXBoeS50eHQNCj4gbmV3IGZpbGUg bW9kZSAxMDA2NDQNCj4gaW5kZXggMDAwMDAwMC4uMmYyZDU2ZA0KPiAtLS0gL2Rldi9udWxsDQo+ ICsrKyBiL0RvY3VtZW50YXRpb24vZGV2aWNldHJlZS9iaW5kaW5ncy9uZXQvZnNsLXhnbWFjLXBo eS50eHQNCj4gQEAgLTAsMCArMSwyOSBAQA0KPiArKk1ESU8gSU8gZGV2aWNlDQo+ICsNCj4gK1Ro ZSBNRElPIGlzIGEgYnVzIHRvIHdoaWNoIHRoZSBQSFkgZGV2aWNlcyBhcmUgY29ubmVjdGVkLiBG b3IgZWFjaA0KPiArZGV2aWNlIHRoYXQgZXhpc3RzIG9uIHRoaXMgYnVzLCBhIGNoaWxkIG5vZGUg c2hvdWxkIGJlIGNyZWF0ZWQuDQo+ICsNCj4gK1JlcXVpcmVkIHByb3BlcnRpZXM6DQo+ICsJLSBj b21wYXRpYmxlOiBDdXJyZW50bHkgc3VwcG9ydGVkIHN0cmluZ3MvZGV2aWNlcyBhcmU6DQo+ICsJ CQktICJmc2wsZm1hbi14bWRpbyIgKE11c3QgYmUgdXNlZCBmb3IgMTAgR2IvcyBNRElPIGZyb20N Cj4gRk1hbiB2Mi4NCj4gKwkJCSAgQ2FuIGJlIHVzZWQgZm9yIDEvMTAgR2IvcyBNRElPIGZyb20g Rk1hbiB2MykNCj4gKwkJCS0gImZzbCxmbWFuLW1lbWFjLW1kaW8iIChNdXN0IGJlIHVzZWQgZm9y IDEvMTAgR2Ivcw0KPiBNRElPIGZyb20NCj4gKwkJCSAgRk1hbiB2MykNCj4gKwktIHJlZw0KPiAr DQo+ICsJRXhhbXBsZSBmb3IgRk1hbiB2MjoNCj4gKwkJbWRpb0BmMTAwMCB7DQo+ICsJCQkjYWRk cmVzcy1jZWxscyA9IDwxPjsNCj4gKwkJCSNzaXplLWNlbGxzID0gPDA+Ow0KPiArCQkJY29tcGF0 aWJsZSA9ICJmc2wsZm1hbi14bWRpbyI7DQo+ICsJCQlyZWcgPSA8MHhmMTAwMCAweDEwMDA+Ow0K PiArCQl9Ow0KPiArDQo+ICsJRXhhbXBsZSBmb3IgRk1hbiB2MzoNCj4gKw0KPiArCQltZGlvQGYx MDAwIHsNCj4gKwkJCSNhZGRyZXNzLWNlbGxzID0gPDE+Ow0KPiArCQkJI3NpemUtY2VsbHMgPSA8 MD47DQo+ICsJCQljb21wYXRpYmxlID0gImZzbCxmbWFuLW1lbWFjLW1kaW8iLCAiZnNsLGZtYW4t eG1kaW8iOw0KPiArCQkJcmVnID0gPDB4ZjEwMDAgMHgxMDAwPjsNCj4gKwkJfQ0KPiAtLQ0KPiAx LjguMy4xDQo+IA0KPiBfX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19f X19fXw0KPiBMaW51eHBwYy1kZXYgbWFpbGluZyBsaXN0DQo+IExpbnV4cHBjLWRldkBsaXN0cy5v emxhYnMub3JnDQo+IGh0dHBzOi8vbGlzdHMub3psYWJzLm9yZy9saXN0aW5mby9saW51eHBwYy1k ZXYNCg== ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding 2014-07-25 3:11 ` [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shaohui Xie @ 2014-07-25 19:54 ` Scott Wood 2014-07-26 8:17 ` Emil Medve 2014-07-25 20:00 ` Emil Medve 1 sibling, 1 reply; 23+ messages in thread From: Scott Wood @ 2014-07-25 19:54 UTC (permalink / raw) To: Xie Shaohui-B21989; +Cc: Kanetkar Shruti-B44454, linuxppc-dev On Thu, 2014-07-24 at 22:11 -0500, Xie Shaohui-B21989 wrote: > Hello, Scott, Shruti, > > There are two types MDIO controllers, each MAC has a corresponding MDIO > controller to access internal PHYs inside Serdes, another is dedicated > MDIO controller to access external PHYs (PHYs on board or riser card, > etc). Current MDIO driver does not distinguish the two controllers, if > we need to distinguish the controllers, what could be the proper way? > Perhaps a new property is needed in dts? Are these different programming models, or just two instances of the same type of device, with different things attached? -Scott ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding 2014-07-25 19:54 ` Scott Wood @ 2014-07-26 8:17 ` Emil Medve 0 siblings, 0 replies; 23+ messages in thread From: Emil Medve @ 2014-07-26 8:17 UTC (permalink / raw) To: Scott Wood, Xie Shaohui-B21989; +Cc: Kanetkar Shruti-B44454, linuxppc-dev Hello Scott, On 07/25/2014 02:54 PM, Scott Wood wrote: > On Thu, 2014-07-24 at 22:11 -0500, Xie Shaohui-B21989 wrote: >> Hello, Scott, Shruti, >> >> There are two types MDIO controllers, each MAC has a corresponding MDIO >> controller to access internal PHYs inside Serdes, another is dedicated >> MDIO controller to access external PHYs (PHYs on board or riser card, >> etc). Current MDIO driver does not distinguish the two controllers, if >> we need to distinguish the controllers, what could be the proper way? >> Perhaps a new property is needed in dts? > > Are these different programming models, or just two instances of the > same type of device, with different things attached? The controllers are very similar; the FMan v3 MDIO controller is a newer revision of the FMan v2 10 Gb/s MDIO controller Cheers, > -Scott > > > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@lists.ozlabs.org > https://lists.ozlabs.org/listinfo/linuxppc-dev ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding 2014-07-25 3:11 ` [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shaohui Xie 2014-07-25 19:54 ` Scott Wood @ 2014-07-25 20:00 ` Emil Medve 1 sibling, 0 replies; 23+ messages in thread From: Emil Medve @ 2014-07-25 20:00 UTC (permalink / raw) To: Shaohui Xie, Shruti Kanetkar, Scott Wood; +Cc: linuxppc-dev Hello Shao-Hui, On 07/24/2014 10:11 PM, Shaohui Xie wrote: > Hello, Scott, Shruti, > > There are two types MDIO controllers, each MAC has a corresponding > MDIO controller to access internal PHYs inside Serdes, another is > dedicated MDIO controller to access external PHYs (PHYs on board or > riser card, etc). Current MDIO driver does not distinguish the two > controllers, if we need to distinguish the controllers, what could be > the proper way? Perhaps a new property is needed in dts? As per the intended binding, FMan v3 MDIO must use the "fsl,fman-memac-mdio" compatible. Why is that not enough to differentiate the two controllers? Cheers, > Please comment! > Thanks! > > Best Regards, > Shaohui Xie >> -----Original Message----- >> From: Linuxppc-dev [mailto:linuxppc-dev- >> bounces+b21989=freescale.com@lists.ozlabs.org] On Behalf Of Shruti >> Kanetkar >> Sent: Thursday, July 17, 2014 4:17 AM >> To: Wood Scott-B07421 >> Cc: Kanetkar Shruti-B44454; linuxppc-dev@lists.ozlabs.org >> Subject: [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding >> >> This document covers FManv2 and FManv3 mEMAC MDIO >> >> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> >> --- >> .../devicetree/bindings/net/fsl-xgmac-phy.txt | 29 >> ++++++++++++++++++++++ >> 1 file changed, 29 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/net/fsl-xgmac- >> phy.txt >> >> diff --git a/Documentation/devicetree/bindings/net/fsl-xgmac-phy.txt >> b/Documentation/devicetree/bindings/net/fsl-xgmac-phy.txt >> new file mode 100644 >> index 0000000..2f2d56d >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/fsl-xgmac-phy.txt >> @@ -0,0 +1,29 @@ >> +*MDIO IO device >> + >> +The MDIO is a bus to which the PHY devices are connected. For each >> +device that exists on this bus, a child node should be created. >> + >> +Required properties: >> + - compatible: Currently supported strings/devices are: >> + - "fsl,fman-xmdio" (Must be used for 10 Gb/s MDIO from >> FMan v2. >> + Can be used for 1/10 Gb/s MDIO from FMan v3) >> + - "fsl,fman-memac-mdio" (Must be used for 1/10 Gb/s >> MDIO from >> + FMan v3) >> + - reg >> + >> + Example for FMan v2: >> + mdio@f1000 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "fsl,fman-xmdio"; >> + reg = <0xf1000 0x1000>; >> + }; >> + >> + Example for FMan v3: >> + >> + mdio@f1000 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; >> + reg = <0xf1000 0x1000>; >> + } >> -- >> 1.8.3.1 >> >> _______________________________________________ >> Linuxppc-dev mailing list >> Linuxppc-dev@lists.ozlabs.org >> https://lists.ozlabs.org/listinfo/linuxppc-dev ^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2014-08-13 8:59 UTC | newest] Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2014-07-16 20:17 [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shruti Kanetkar 2014-07-16 20:17 ` [PATCH v2 2/7] net/fsl_pq_mdio: Document supported compatibles Shruti Kanetkar 2014-07-16 20:17 ` [PATCH v2 3/7] powerpc/corenet: Create the dts components for the DPAA FMan Shruti Kanetkar 2014-07-21 22:13 ` Scott Wood 2014-07-16 20:17 ` [PATCH v2 4/7] powerpc/corenet: Add DPAA FMan support to the SoC device tree(s) Shruti Kanetkar 2014-07-16 20:17 ` [PATCH v2 5/7] powerpc/corenet: Add MDIO bus muxing support to the board " Shruti Kanetkar 2014-07-21 22:45 ` Scott Wood 2014-07-28 6:51 ` Emil Medve 2014-07-29 19:58 ` Scott Wood 2014-07-30 21:52 ` Emil Medve 2014-07-31 2:30 ` Scott Wood 2014-07-31 4:35 ` Emil Medve 2014-07-31 5:28 ` Scott Wood 2014-07-31 5:48 ` Emil Medve 2014-07-31 18:30 ` Scott Wood 2014-07-31 18:49 ` Emil Medve 2014-08-13 8:44 ` Shaohui Xie 2014-07-16 20:17 ` [PATCH v2 6/7] powerpc/corenet: Enable muxing MDIO buses via GPIO Shruti Kanetkar 2014-07-16 20:17 ` [PATCH v2 7/7] powerpc/corenet: Enable muxing MDIO buses via FPGA Shruti Kanetkar 2014-07-25 3:11 ` [PATCH v2 1/7] dt: Introduce the FMan 10 Gb/s MDIO binding Shaohui Xie 2014-07-25 19:54 ` Scott Wood 2014-07-26 8:17 ` Emil Medve 2014-07-25 20:00 ` Emil Medve
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.