From: Keerthy <j-keerthy@ti.com> To: <linux-patch-review@list.ti.com> Cc: <nm@ti.com>, <mark.rutland@arm.com>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>, <tony@atomide.com>, <galak@codeaurora.org>, <lokeshvutla@ti.com> Subject: [PATCH 2/2] ARM: dts: dra72-evm: Add tps65917 PMIC node Date: Mon, 28 Jul 2014 11:48:54 +0530 [thread overview] Message-ID: <1406528334-4415-3-git-send-email-j-keerthy@ti.com> (raw) In-Reply-To: <1406528334-4415-1-git-send-email-j-keerthy@ti.com> From: Keerthy J <j-keerthy@ti.com> DRA72x-evm uses TPS65917 PMIC. Add the node. NOTE: LDO2 is actually unused, but the usage if any is expected to be between 1.8 to 3.3v IO voltage. So define the node. NOTE: Interrupt used is crossbar number based. Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> --- arch/arm/boot/dts/dra72-evm.dts | 104 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 1e12862..4107428 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -33,6 +33,110 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; + + tps65917: tps65917@58 { + compatible = "ti,tps65917"; + reg = <0x58>; + + interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + + ti,system-power-controller; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + regulators { + smps1_reg: smps1 { + /* VDD_MPU */ + regulator-name = "smps1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps2_reg: smps2 { + /* VDD_CORE */ + regulator-name = "smps2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + + smps3_reg: smps3 { + /* VDD_GPU IVA DSPEVE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDDS1V8 */ + regulator-name = "smps4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDD_DDR */ + regulator-name = "smps5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + /* LDO2_OUT --> TP1017 (UNUSED) */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + }; }; &uart1 { -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org> To: linux-patch-review-uAqBSO/uNfhBDgjK7y7TUQ@public.gmane.org Cc: nm-l0cyMroinI0@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, lokeshvutla-l0cyMroinI0@public.gmane.org Subject: [PATCH 2/2] ARM: dts: dra72-evm: Add tps65917 PMIC node Date: Mon, 28 Jul 2014 11:48:54 +0530 [thread overview] Message-ID: <1406528334-4415-3-git-send-email-j-keerthy@ti.com> (raw) In-Reply-To: <1406528334-4415-1-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org> From: Keerthy J <j-keerthy-l0cyMroinI0@public.gmane.org> DRA72x-evm uses TPS65917 PMIC. Add the node. NOTE: LDO2 is actually unused, but the usage if any is expected to be between 1.8 to 3.3v IO voltage. So define the node. NOTE: Interrupt used is crossbar number based. Tested-by: Lokesh Vutla <lokeshvutla-l0cyMroinI0@public.gmane.org> Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org> Signed-off-by: Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org> --- arch/arm/boot/dts/dra72-evm.dts | 104 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 1e12862..4107428 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -33,6 +33,110 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; + + tps65917: tps65917@58 { + compatible = "ti,tps65917"; + reg = <0x58>; + + interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + + ti,system-power-controller; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + regulators { + smps1_reg: smps1 { + /* VDD_MPU */ + regulator-name = "smps1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps2_reg: smps2 { + /* VDD_CORE */ + regulator-name = "smps2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + + smps3_reg: smps3 { + /* VDD_GPU IVA DSPEVE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDDS1V8 */ + regulator-name = "smps4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDD_DDR */ + regulator-name = "smps5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + /* LDO2_OUT --> TP1017 (UNUSED) */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + }; }; &uart1 { -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-07-28 6:22 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-07-28 6:18 [PATCH 0/2] ARM: dts: dra72-evm: Add i2c1 and tps65917 nodes Keerthy 2014-07-28 6:18 ` Keerthy 2014-07-28 6:18 ` [PATCH 1/2] ARM: dts: dra72-evm: Enable I2C1 node Keerthy 2014-07-28 6:18 ` Keerthy 2014-07-28 9:24 ` Keerthy 2014-07-28 9:24 ` Keerthy 2014-07-28 6:18 ` Keerthy [this message] 2014-07-28 6:18 ` [PATCH 2/2] ARM: dts: dra72-evm: Add tps65917 PMIC node Keerthy 2014-07-28 9:23 ` Keerthy 2014-07-28 9:23 ` Keerthy 2014-07-28 6:30 ` [PATCH 0/2] ARM: dts: dra72-evm: Add i2c1 and tps65917 nodes Lokesh Vutla 2014-07-28 6:30 ` Lokesh Vutla 2014-07-28 9:22 ` Keerthy 2014-07-28 9:22 ` Keerthy 2014-08-12 12:35 ` Keerthy 2014-08-12 12:35 ` Keerthy 2014-09-08 20:04 ` Nishanth Menon 2014-09-08 20:04 ` Nishanth Menon 2014-09-08 23:12 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1406528334-4415-3-git-send-email-j-keerthy@ti.com \ --to=j-keerthy@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=galak@codeaurora.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-patch-review@list.ti.com \ --cc=lokeshvutla@ti.com \ --cc=mark.rutland@arm.com \ --cc=nm@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.