* [PATCH v8 00/11] Add DRM for stih4xx platforms
@ 2014-07-30 17:41 Benjamin Gaignard
2014-07-30 17:41 ` [PATCH v8 01/11] drm: sti: add bindings for DRM driver Benjamin Gaignard
` (10 more replies)
0 siblings, 11 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-30 17:41 UTC (permalink / raw)
To: dri-devel, linaro-mm-sig, linux-kernel, airlied; +Cc: Benjamin Gaignard
This series of patches add the support of DRM/KMS drivers for STMicroelectronics
chipsets stih416 and stih407.
version 8:
- Allow driver to be build as kernel module.
- Use Universal Plane instead of legacy code.
patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git
on branch: drm_kms_for_next-v8
version 7:
- rebased on top of drm-next (2014-07-24)
patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git
on branch: drm_kms_for_next-v7
version 6:
- rebased on top of new component framework API.
patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git
on branch: drm_kms_for_next-v6
version 5:
- Rework sti_drm_drv probes functions to support deferred probe.
This allow hdmi to delayed framebuffer creation until I2C is available.
- Add ops functions in sti_layer structure to simpify GDP and VID code.
- Add NOTES file to describe how the DRM concepts are mapped on hardware.
patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git
on branch: drm_kms_for_next-v5
version 4:
- Remove depency between TVout it subdevices HDMI and HDA
- Rework and simplify VTG and VTAC code
- Fix numbers of typo and indentation
- Remove debug (will be push in separate patches)
- Fix remarks done in previous patcheset
patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git
on branch: drm_kms_for_next-v4
version 3:
- Correctly split code between probe and bind funtions
- Squash some commits
- remove HQ-VDP device code to have a smaller patcheset,
we will introduce it later.
patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git
on branch: drm_kms_for_next-v3
version 2:
- Use componentized device instead of register sub-devices in master
driver probe function
- Fix Makefile and Kconfig to only allow built-in compilation
patches could be found here: git://git.linaro.org/people/benjamin.gaignard/kernel.git
on branch: drm_kms_for_next-v2
version 1:
- First path submission
Hardware is split in two main blocks: Compositor and TVout. Each of them
includes specific hardware IPs and the display timing are controlled by a specific
Video Timing Generator hardware IP (VTG).
Compositor is made of the follow hardware IPs:
- GDP (Generic Display Pipeline) which is an entry point for graphic (RGB)
buffers
- VDP (Video Diplay Pipeline) which is an entry point for video (YUV) buffers
- HQVDP (High Quality Video Display Processor) that supports scaling,
deinterlacing and some miscellaneous image quality improvements.
It fetches the Video decoded buffers from memory, processes them and pushes
them to the Compositor through a HW dedicated bus.
- Mixer is responsible of mixing all the entries depending of their
respective z-order and layout
TVout is divided in 3 parts:
- HDMI to generate HDMI signals, depending of chipset version HDMI phy can
change.
- HDA to generate signals for HD analog TV
- VIP to control/switch data path coming from Compositor
On stih416 compositor and Tvout are on different dies so a Video Trafic Advance
inter-die Communication mechanism (VTAC) is needed.
+---------------------------------------------+ +----------------------------------------+
| +-------------------------------+ +----+ | | +----+ +--------------------------+ |
| | | | | | | | | | +---------+ +----+ | |
| | +----+ +------+ | | | | | | | | | VIP |---->|HDMI| | |
| | |GPD +------------->| | | | | | | | | | | | +----+ | |
| | +----+ |Mixer |--|-->| | | | | |---|->| switcher| | |
| | | | | | | | | | | | | | +----+ | |
| | | | | | | | | | | | | |---->|HDA | | |
| | +------+ | |VTAC|========>|VTAC| | +---------+ +----+ | |
| | | | | | | | | | | |
| | Compositor | | | | | | | | TVout | |
| +-------------------------------+ | | | | | | +--------------------------+ |
| ^ | | | | | | ^ |
| | | | | | | | | |
| +--------------+ | | | | | | +-------------+ |
| | VTG (master) |----->| | | | | |----->| VTG (slave) | |
| +--------------+ +----+ | | +----+ +-------------+ |
|Digital die | | Analog Die|
+---------------------------------------------+ +----------------------------------------+
On stih407 Compositor and Tvout are on the same die
+-----------------------------------------------------------------+
| +-------------------------------+ +--------------------------+ |
| | | | +---------+ +----+ | |
| | +----+ +------+ | | | VIP |---->|HDMI| | |
| | |GPD +------------->| | | | | | +----+ | |
| | +----+ |Mixer |--|--|->| switcher| | |
| | +----+ +-----+ | | | | | | +----+ | |
| | |VDP +-->+HQVDP+--->| | | | | |---->|HDA | | |
| | +----+ +-----+ +------+ | | +---------+ +----+ | |
| | | | | |
| | Compositor | | TVout | |
| +-------------------------------+ +--------------------------+ |
| ^ ^ |
| | | |
| +--------------+ |
| | VTG | |
| +--------------+ |
|Digital die |
+-----------------------------------------------------------------+
In addition of the drivers for the IPs listed before a thin I2C driver (hdmiddc) is used
by HDMI driver to retrieve EDID for monitor.
To unify interfaces of GDP and VDP we create a "layer" interface called by
compositor to control both GPD and VDP.
Hardware have memory contraints (alignment, contiguous) so we use CMA drm helpers functions
to allocate frame buffer.
File naming convention is:
- sti_* for IPs drivers
- sti_drm_* for drm functions implementation.
Benjamin Gaignard (11):
drm: sti: add bindings for DRM driver
drm: sti: add VTG driver
drm: sti: add VTAC drivers
drm: sti: add HDMI driver
drm: sti: add HDA driver
drm: sti: add TVOut driver
drm: sti: add GDP layer
drm: sti: add VID layer
drm: sti: add Mixer
drm: sti: add Compositor
drm: sti: Add DRM driver itself
.../devicetree/bindings/gpu/st,stih4xx.txt | 189 +++++
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/sti/Kconfig | 14 +
drivers/gpu/drm/sti/Makefile | 21 +
drivers/gpu/drm/sti/NOTES | 58 ++
drivers/gpu/drm/sti/sti_compositor.c | 279 +++++++
drivers/gpu/drm/sti/sti_compositor.h | 90 +++
drivers/gpu/drm/sti/sti_drm_crtc.c | 423 +++++++++++
drivers/gpu/drm/sti/sti_drm_crtc.h | 22 +
drivers/gpu/drm/sti/sti_drm_drv.c | 241 ++++++
drivers/gpu/drm/sti/sti_drm_drv.h | 29 +
drivers/gpu/drm/sti/sti_drm_plane.c | 195 +++++
drivers/gpu/drm/sti/sti_drm_plane.h | 18 +
drivers/gpu/drm/sti/sti_gdp.c | 549 ++++++++++++++
drivers/gpu/drm/sti/sti_gdp.h | 16 +
drivers/gpu/drm/sti/sti_hda.c | 794 ++++++++++++++++++++
drivers/gpu/drm/sti/sti_hdmi.c | 810 +++++++++++++++++++++
drivers/gpu/drm/sti/sti_hdmi.h | 88 +++
drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c | 336 +++++++++
drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h | 14 +
drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c | 211 ++++++
drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h | 14 +
drivers/gpu/drm/sti/sti_layer.c | 197 +++++
drivers/gpu/drm/sti/sti_layer.h | 123 ++++
drivers/gpu/drm/sti/sti_mixer.c | 249 +++++++
drivers/gpu/drm/sti/sti_mixer.h | 54 ++
drivers/gpu/drm/sti/sti_tvout.c | 648 +++++++++++++++++
drivers/gpu/drm/sti/sti_vid.c | 138 ++++
drivers/gpu/drm/sti/sti_vid.h | 12 +
drivers/gpu/drm/sti/sti_vtac.c | 215 ++++++
drivers/gpu/drm/sti/sti_vtg.c | 366 ++++++++++
drivers/gpu/drm/sti/sti_vtg.h | 28 +
33 files changed, 6444 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpu/st,stih4xx.txt
create mode 100644 drivers/gpu/drm/sti/Kconfig
create mode 100644 drivers/gpu/drm/sti/Makefile
create mode 100644 drivers/gpu/drm/sti/NOTES
create mode 100644 drivers/gpu/drm/sti/sti_compositor.c
create mode 100644 drivers/gpu/drm/sti/sti_compositor.h
create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.c
create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.h
create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.c
create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.h
create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.c
create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.h
create mode 100644 drivers/gpu/drm/sti/sti_gdp.c
create mode 100644 drivers/gpu/drm/sti/sti_gdp.h
create mode 100644 drivers/gpu/drm/sti/sti_hda.c
create mode 100644 drivers/gpu/drm/sti/sti_hdmi.c
create mode 100644 drivers/gpu/drm/sti/sti_hdmi.h
create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c
create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h
create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c
create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h
create mode 100644 drivers/gpu/drm/sti/sti_layer.c
create mode 100644 drivers/gpu/drm/sti/sti_layer.h
create mode 100644 drivers/gpu/drm/sti/sti_mixer.c
create mode 100644 drivers/gpu/drm/sti/sti_mixer.h
create mode 100644 drivers/gpu/drm/sti/sti_tvout.c
create mode 100644 drivers/gpu/drm/sti/sti_vid.c
create mode 100644 drivers/gpu/drm/sti/sti_vid.h
create mode 100644 drivers/gpu/drm/sti/sti_vtac.c
create mode 100644 drivers/gpu/drm/sti/sti_vtg.c
create mode 100644 drivers/gpu/drm/sti/sti_vtg.h
--
1.9.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v8 01/11] drm: sti: add bindings for DRM driver
2014-07-30 17:41 [PATCH v8 00/11] Add DRM for stih4xx platforms Benjamin Gaignard
@ 2014-07-30 17:41 ` Benjamin Gaignard
2014-07-30 17:41 ` [PATCH v8 02/11] drm: sti: add VTG driver Benjamin Gaignard
` (9 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-30 17:41 UTC (permalink / raw)
To: dri-devel, linaro-mm-sig, linux-kernel, airlied; +Cc: Benjamin Gaignard
Add DRM/KMS driver bindings documentation.
Describe the required properties for each of the hardware IPs drivers.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
---
.../devicetree/bindings/gpu/st,stih4xx.txt | 189 +++++++++++++++++++++
drivers/gpu/drm/sti/NOTES | 58 +++++++
2 files changed, 247 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpu/st,stih4xx.txt
create mode 100644 drivers/gpu/drm/sti/NOTES
diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
new file mode 100644
index 0000000..2d150c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
@@ -0,0 +1,189 @@
+STMicroelectronics stih4xx platforms
+
+- sti-vtg: video timing generator
+ Required properties:
+ - compatible: "st,vtg"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ Optional properties:
+ - interrupts : VTG interrupt number to the CPU.
+ - st,slave: phandle on a slave vtg
+
+- sti-vtac: video timing advanced inter dye communication Rx and TX
+ Required properties:
+ - compatible: "st,vtac-main" or "st,vtac-aux"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+
+- sti-display-subsystem: Master device for DRM sub-components
+ This device must be the parent of all the sub-components and is responsible
+ of bind them.
+ Required properties:
+ - compatible: "st,sti-display-subsystem"
+ - ranges: to allow probing of subdevices
+
+- sti-compositor: frame compositor engine
+ must be a child of sti-display-subsystem
+ Required properties:
+ - compatible: "st,stih<chip>-compositor"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+ - resets: resets to be used by the device
+ See ../reset/reset.txt for details.
+ - reset-names: names of the resets listed in resets property in the same
+ order.
+ - st,vtg: phandle(s) on vtg device (main and aux) nodes.
+
+- sti-tvout: video out hardware block
+ must be a child of sti-display-subsystem
+ Required properties:
+ - compatible: "st,stih<chip>-tvout"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - resets: resets to be used by the device
+ See ../reset/reset.txt for details.
+ - reset-names: names of the resets listed in resets property in the same
+ order.
+ - ranges: to allow probing of subdevices
+
+- sti-hdmi: hdmi output block
+ must be a child of sti-tvout
+ Required properties:
+ - compatible: "st,stih<chip>-hdmi";
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - interrupts : HDMI interrupt number to the CPU.
+ - interrupt-names: name of the interrupts listed in interrupts property in
+ the same order
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+ - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not.
+
+sti-hda:
+ Required properties:
+ must be a child of sti-tvout
+ - compatible: "st,stih<chip>-hda"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+
+Example:
+
+/ {
+ ...
+
+ vtg_main_slave: sti-vtg-main-slave@fe85A800 {
+ compatible = "st,vtg";
+ reg = <0xfe85A800 0x300>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>;
+ };
+
+ vtg_main: sti-vtg-main-master@fd348000 {
+ compatible = "st,vtg";
+ reg = <0xfd348000 0x400>;
+ st,slave = <&vtg_main_slave>;
+ };
+
+ vtg_aux_slave: sti-vtg-aux-slave@fd348400 {
+ compatible = "st,vtg";
+ reg = <0xfe858200 0x300>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux-master@fd348400 {
+ compatible = "st,vtg";
+ reg = <0xfd348400 0x400>;
+ st,slave = <&vtg_aux_slave>;
+ };
+
+
+ sti-vtac-rx-main@fee82800 {
+ compatible = "st,vtac-main";
+ reg = <0xfee82800 0x200>;
+ clock-names = "vtac";
+ clocks = <&clk_m_a2_div0 CLK_M_VTAC_MAIN_PHY>;
+ };
+
+ sti-vtac-rx-aux@fee82a00 {
+ compatible = "st,vtac-aux";
+ reg = <0xfee82a00 0x200>;
+ clock-names = "vtac";
+ clocks = <&clk_m_a2_div0 CLK_M_VTAC_AUX_PHY>;
+ };
+
+ sti-vtac-tx-main@fd349000 {
+ compatible = "st,vtac-main";
+ reg = <0xfd349000 0x200>, <0xfd320000 0x10000>;
+ clock-names = "vtac";
+ clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
+ };
+
+ sti-vtac-tx-aux@fd349200 {
+ compatible = "st,vtac-aux";
+ reg = <0xfd349200 0x200>, <0xfd320000 0x10000>;
+ clock-names = "vtac";
+ clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
+ };
+
+ sti-display-subsystem {
+ compatible = "st,sti-display-subsystem";
+ ranges;
+
+ sti-compositor@fd340000 {
+ compatible = "st,stih416-compositor";
+ reg = <0xfd340000 0x1000>;
+ clock-names = "compo_main", "compo_aux",
+ "pix_main", "pix_aux";
+ clocks = <&clk_m_a2_div1 CLK_M_COMPO_MAIN>, <&clk_m_a2_div1 CLK_M_COMPO_AUX>,
+ <&clockgen_c_vcc CLK_S_PIX_MAIN>, <&clockgen_c_vcc CLK_S_PIX_AUX>;
+ reset-names = "compo-main", "compo-aux";
+ resets = <&softreset STIH416_COMPO_M_SOFTRESET>, <&softreset STIH416_COMPO_A_SOFTRESET>;
+ st,vtg = <&vtg_main>, <&vtg_aux>;
+ };
+
+ sti-tvout@fe000000 {
+ compatible = "st,stih416-tvout";
+ reg = <0xfe000000 0x1000>, <0xfe85a000 0x400>, <0xfe830000 0x10000>;
+ reg-names = "tvout-reg", "hda-reg", "syscfg";
+ reset-names = "tvout";
+ resets = <&softreset STIH416_HDTVOUT_SOFTRESET>;
+ ranges;
+
+ sti-hdmi@fe85c000 {
+ compatible = "st,stih416-hdmi";
+ reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
+ reg-names = "hdmi-reg", "syscfg";
+ interrupts = <GIC_SPI 173 IRQ_TYPE_NONE>;
+ interrupt-names = "irq";
+ clock-names = "pix", "tmds", "phy", "audio";
+ clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
+ hdmi,hpd-gpio = <&PIO2 5>;
+ };
+
+ sti-hda@fe85a000 {
+ compatible = "st,stih416-hda";
+ reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>;
+ reg-names = "hda-reg", "video-dacs-ctrl";
+ clock-names = "pix", "hddac";
+ clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
+ };
+ };
+ };
+ ...
+};
diff --git a/drivers/gpu/drm/sti/NOTES b/drivers/gpu/drm/sti/NOTES
new file mode 100644
index 0000000..57e2579
--- /dev/null
+++ b/drivers/gpu/drm/sti/NOTES
@@ -0,0 +1,58 @@
+1. stiH display hardware IP
+---------------------------
+The STMicroelectronics stiH SoCs use a common chain of HW display IP blocks:
+- The High Quality Video Display Processor (HQVDP) gets video frames from a
+ video decoder and does high quality video processing, including scaling.
+
+- The Compositor is a multiplane, dual-mixer (Main & Aux) digital processor. It
+ has several inputs:
+ - The graphics planes are internally processed by the Generic Display
+ Pipeline (GDP).
+ - The video plug (VID) connects to the HQVDP output.
+ - The cursor handles ... a cursor.
+- The TV OUT pre-formats (convert, clip, round) the compositor output data
+- The HDMI / DVO / HD Analog / SD analog IP builds the video signals
+ - DVO (Digital Video Output) handles a 24bits parallel signal
+ - The HD analog signal is typically driven by a YCbCr cable, supporting up to
+ 1080i mode.
+ - The SD analog signal is typically used for legacy TV
+- The VTG (Video Timing Generators) build Vsync signals used by the other HW IP
+Note that some stiH drivers support only a subset of thee HW IP.
+
+ .-------------. .-----------. .-----------.
+GPU >-------------+GDP Main | | +---+ HDMI +--> HDMI
+GPU >-------------+GDP mixer+---+ | :===========:
+GPU >-------------+Cursor | | +---+ DVO +--> 24b//
+ ------- | COMPOSITOR | | TV OUT | :===========:
+ | | | | | +---+ HD analog +--> YCbCr
+Vid >--+ HQVDP +--+VID Aux +---+ | :===========:
+dec | | | mixer| | +---+ SD analog +--> CVBS
+ '-------' '-------------' '-----------' '-----------'
+ .-----------.
+ | main+--> Vsync
+ | VTG |
+ | aux+--> Vsync
+ '-----------'
+
+2. DRM / HW mapping
+-------------------
+These IP are mapped to the DRM objects as following:
+- The CRTCs are mapped to the Compositor Main and Aux Mixers
+- The Framebuffers and planes are mapped to the Compositor GDP (non video
+ buffers) and to HQVDP+VID (video buffers)
+- The Cursor is mapped to the Compositor Cursor
+- The Encoders are mapped to the TVOut
+- The Bridges/Connectors are mapped to the HDMI / DVO / HD Analog / SD analog
+
+FB & planes Cursor CRTC Encoders Bridges/Connectors
+ | | | | |
+ | | | | |
+ | .-------------. | .-----------. .-----------. |
+ +------------> |GDP | Main | | | +-> | | HDMI | <-+
+ +------------> |GDP v mixer|<+ | | | :===========: |
+ | |Cursor | | | +-> | | DVO | <-+
+ | ------- | COMPOSITOR | | |TV OUT | | :===========: |
+ | | | | | | | +-> | | HD analog | <-+
+ +-> | HQVDP | |VID Aux |<+ | | | :===========: |
+ | | | mixer| | +-> | | SD analog | <-+
+ '-------' '-------------' '-----------' '-----------'
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v8 02/11] drm: sti: add VTG driver
2014-07-30 17:41 [PATCH v8 00/11] Add DRM for stih4xx platforms Benjamin Gaignard
2014-07-30 17:41 ` [PATCH v8 01/11] drm: sti: add bindings for DRM driver Benjamin Gaignard
@ 2014-07-30 17:41 ` Benjamin Gaignard
2014-07-30 17:41 ` [PATCH v8 03/11] drm: sti: add VTAC drivers Benjamin Gaignard
` (8 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-30 17:41 UTC (permalink / raw)
To: dri-devel, linaro-mm-sig, linux-kernel, airlied; +Cc: Benjamin Gaignard
Video Time Generator drivers are used to synchronize the compositor
and tvout hardware IPs by providing line count, sample count,
synchronization signals (HSYNC, VSYNC) and top and bottom fields
indication.
VTG are used by pair for each data path (main or auxiliary)
one for master and one for slave.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
---
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/sti/Kconfig | 5 +
drivers/gpu/drm/sti/Makefile | 2 +
drivers/gpu/drm/sti/sti_vtg.c | 366 ++++++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/sti/sti_vtg.h | 28 ++++
6 files changed, 404 insertions(+)
create mode 100644 drivers/gpu/drm/sti/Kconfig
create mode 100644 drivers/gpu/drm/sti/Makefile
create mode 100644 drivers/gpu/drm/sti/sti_vtg.c
create mode 100644 drivers/gpu/drm/sti/sti_vtg.h
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index f512004..31894c8 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -201,3 +201,5 @@ source "drivers/gpu/drm/msm/Kconfig"
source "drivers/gpu/drm/tegra/Kconfig"
source "drivers/gpu/drm/panel/Kconfig"
+
+source "drivers/gpu/drm/sti/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 61d9e9c..60eb5d4 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -64,6 +64,7 @@ obj-$(CONFIG_DRM_QXL) += qxl/
obj-$(CONFIG_DRM_BOCHS) += bochs/
obj-$(CONFIG_DRM_MSM) += msm/
obj-$(CONFIG_DRM_TEGRA) += tegra/
+obj-$(CONFIG_DRM_STI) += sti/
obj-y += i2c/
obj-y += panel/
obj-y += bridge/
diff --git a/drivers/gpu/drm/sti/Kconfig b/drivers/gpu/drm/sti/Kconfig
new file mode 100644
index 0000000..a18df02
--- /dev/null
+++ b/drivers/gpu/drm/sti/Kconfig
@@ -0,0 +1,5 @@
+config DRM_STI
+ tristate "DRM Support for STMicroelectronics SoC stiH41x Series"
+ depends on DRM && (SOC_STIH415 || SOC_STIH416 || ARCH_MULTIPLATFORM)
+ help
+ Choose this option to enable DRM on STM stiH41x chipset
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
new file mode 100644
index 0000000..1759c20
--- /dev/null
+++ b/drivers/gpu/drm/sti/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_DRM_STI) = \
+ sti_vtg.o
diff --git a/drivers/gpu/drm/sti/sti_vtg.c b/drivers/gpu/drm/sti/sti_vtg.c
new file mode 100644
index 0000000..740d6e3
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_vtg.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ * Fabien Dessenne <fabien.dessenne@st.com>
+ * Vincent Abriou <vincent.abriou@st.com>
+ * for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+
+#include <drm/drmP.h>
+
+#include "sti_vtg.h"
+
+#define VTG_TYPE_MASTER 0
+#define VTG_TYPE_SLAVE_BY_EXT0 1
+
+/* registers offset */
+#define VTG_MODE 0x0000
+#define VTG_CLKLN 0x0008
+#define VTG_HLFLN 0x000C
+#define VTG_DRST_AUTOC 0x0010
+#define VTG_VID_TFO 0x0040
+#define VTG_VID_TFS 0x0044
+#define VTG_VID_BFO 0x0048
+#define VTG_VID_BFS 0x004C
+
+#define VTG_HOST_ITS 0x0078
+#define VTG_HOST_ITS_BCLR 0x007C
+#define VTG_HOST_ITM_BCLR 0x0088
+#define VTG_HOST_ITM_BSET 0x008C
+
+#define VTG_H_HD_1 0x00C0
+#define VTG_TOP_V_VD_1 0x00C4
+#define VTG_BOT_V_VD_1 0x00C8
+#define VTG_TOP_V_HD_1 0x00CC
+#define VTG_BOT_V_HD_1 0x00D0
+
+#define VTG_H_HD_2 0x00E0
+#define VTG_TOP_V_VD_2 0x00E4
+#define VTG_BOT_V_VD_2 0x00E8
+#define VTG_TOP_V_HD_2 0x00EC
+#define VTG_BOT_V_HD_2 0x00F0
+
+#define VTG_H_HD_3 0x0100
+#define VTG_TOP_V_VD_3 0x0104
+#define VTG_BOT_V_VD_3 0x0108
+#define VTG_TOP_V_HD_3 0x010C
+#define VTG_BOT_V_HD_3 0x0110
+
+#define VTG_IRQ_BOTTOM BIT(0)
+#define VTG_IRQ_TOP BIT(1)
+#define VTG_IRQ_MASK (VTG_IRQ_TOP | VTG_IRQ_BOTTOM)
+
+/* delay introduced by the Arbitrary Waveform Generator in nb of pixels */
+#define AWG_DELAY_HD (-9)
+#define AWG_DELAY_ED (-8)
+#define AWG_DELAY_SD (-7)
+
+LIST_HEAD(vtg_lookup);
+
+/**
+ * STI VTG structure
+ *
+ * @dev: pointer to device driver
+ * @data: data associated to the device
+ * @irq: VTG irq
+ * @type: VTG type (main or aux)
+ * @notifier_list: notifier callback
+ * @crtc_id: the crtc id for vblank event
+ * @slave: slave vtg
+ * @link: List node to link the structure in lookup list
+ */
+struct sti_vtg {
+ struct device *dev;
+ struct device_node *np;
+ void __iomem *regs;
+ int irq;
+ u32 irq_status;
+ struct raw_notifier_head notifier_list;
+ int crtc_id;
+ struct sti_vtg *slave;
+ struct list_head link;
+};
+
+static void vtg_register(struct sti_vtg *vtg)
+{
+ list_add_tail(&vtg->link, &vtg_lookup);
+}
+
+struct sti_vtg *of_vtg_find(struct device_node *np)
+{
+ struct sti_vtg *vtg;
+
+ list_for_each_entry(vtg, &vtg_lookup, link) {
+ if (vtg->np == np)
+ return vtg;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(of_vtg_find);
+
+static void vtg_reset(struct sti_vtg *vtg)
+{
+ /* reset slave and then master */
+ if (vtg->slave)
+ vtg_reset(vtg->slave);
+
+ writel(1, vtg->regs + VTG_DRST_AUTOC);
+}
+
+static void vtg_set_mode(struct sti_vtg *vtg,
+ int type, const struct drm_display_mode *mode)
+{
+ u32 tmp;
+
+ if (vtg->slave)
+ vtg_set_mode(vtg->slave, VTG_TYPE_SLAVE_BY_EXT0, mode);
+
+ writel(mode->htotal, vtg->regs + VTG_CLKLN);
+ writel(mode->vtotal * 2, vtg->regs + VTG_HLFLN);
+
+ tmp = (mode->vtotal - mode->vsync_start + 1) << 16;
+ tmp |= mode->htotal - mode->hsync_start;
+ writel(tmp, vtg->regs + VTG_VID_TFO);
+ writel(tmp, vtg->regs + VTG_VID_BFO);
+
+ tmp = (mode->vdisplay + mode->vtotal - mode->vsync_start + 1) << 16;
+ tmp |= mode->hdisplay + mode->htotal - mode->hsync_start;
+ writel(tmp, vtg->regs + VTG_VID_TFS);
+ writel(tmp, vtg->regs + VTG_VID_BFS);
+
+ /* prepare VTG set 1 and 2 for HDMI and VTG set 3 for HD DAC */
+ tmp = (mode->hsync_end - mode->hsync_start) << 16;
+ writel(tmp, vtg->regs + VTG_H_HD_1);
+ writel(tmp, vtg->regs + VTG_H_HD_2);
+
+ tmp = (mode->vsync_end - mode->vsync_start + 1) << 16;
+ tmp |= 1;
+ writel(tmp, vtg->regs + VTG_TOP_V_VD_1);
+ writel(tmp, vtg->regs + VTG_BOT_V_VD_1);
+ writel(0, vtg->regs + VTG_TOP_V_HD_1);
+ writel(0, vtg->regs + VTG_BOT_V_HD_1);
+
+ /* prepare VTG set 2 for for HD DCS */
+ writel(tmp, vtg->regs + VTG_TOP_V_VD_2);
+ writel(tmp, vtg->regs + VTG_BOT_V_VD_2);
+ writel(0, vtg->regs + VTG_TOP_V_HD_2);
+ writel(0, vtg->regs + VTG_BOT_V_HD_2);
+
+ /* prepare VTG set 3 for HD Analog in HD mode */
+ tmp = (mode->hsync_end - mode->hsync_start + AWG_DELAY_HD) << 16;
+ tmp |= mode->htotal + AWG_DELAY_HD;
+ writel(tmp, vtg->regs + VTG_H_HD_3);
+
+ tmp = (mode->vsync_end - mode->vsync_start) << 16;
+ tmp |= mode->vtotal;
+ writel(tmp, vtg->regs + VTG_TOP_V_VD_3);
+ writel(tmp, vtg->regs + VTG_BOT_V_VD_3);
+
+ tmp = (mode->htotal + AWG_DELAY_HD) << 16;
+ tmp |= mode->htotal + AWG_DELAY_HD;
+ writel(tmp, vtg->regs + VTG_TOP_V_HD_3);
+ writel(tmp, vtg->regs + VTG_BOT_V_HD_3);
+
+ /* mode */
+ writel(type, vtg->regs + VTG_MODE);
+}
+
+static void vtg_enable_irq(struct sti_vtg *vtg)
+{
+ /* clear interrupt status and mask */
+ writel(0xFFFF, vtg->regs + VTG_HOST_ITS_BCLR);
+ writel(0xFFFF, vtg->regs + VTG_HOST_ITM_BCLR);
+ writel(VTG_IRQ_MASK, vtg->regs + VTG_HOST_ITM_BSET);
+}
+
+void sti_vtg_set_config(struct sti_vtg *vtg,
+ const struct drm_display_mode *mode)
+{
+ /* write configuration */
+ vtg_set_mode(vtg, VTG_TYPE_MASTER, mode);
+
+ vtg_reset(vtg);
+
+ /* enable irq for the vtg vblank synchro */
+ if (vtg->slave)
+ vtg_enable_irq(vtg->slave);
+ else
+ vtg_enable_irq(vtg);
+}
+EXPORT_SYMBOL(sti_vtg_set_config);
+
+/**
+ * sti_vtg_get_line_number
+ *
+ * @mode: display mode to be used
+ * @y: line
+ *
+ * Return the line number according to the display mode taking
+ * into account the Sync and Back Porch information.
+ * Video frame line numbers start at 1, y starts at 0.
+ * In interlaced modes the start line is the field line number of the odd
+ * field, but y is still defined as a progressive frame.
+ */
+u32 sti_vtg_get_line_number(struct drm_display_mode mode, int y)
+{
+ u32 start_line = mode.vtotal - mode.vsync_start + 1;
+
+ if (mode.flags & DRM_MODE_FLAG_INTERLACE)
+ start_line *= 2;
+
+ return start_line + y;
+}
+EXPORT_SYMBOL(sti_vtg_get_line_number);
+
+/**
+ * sti_vtg_get_pixel_number
+ *
+ * @mode: display mode to be used
+ * @x: row
+ *
+ * Return the pixel number according to the display mode taking
+ * into account the Sync and Back Porch information.
+ * Pixels are counted from 0.
+ */
+u32 sti_vtg_get_pixel_number(struct drm_display_mode mode, int x)
+{
+ return mode.htotal - mode.hsync_start + x;
+}
+EXPORT_SYMBOL(sti_vtg_get_pixel_number);
+
+int sti_vtg_register_client(struct sti_vtg *vtg,
+ struct notifier_block *nb, int crtc_id)
+{
+ if (vtg->slave)
+ return sti_vtg_register_client(vtg->slave, nb, crtc_id);
+
+ vtg->crtc_id = crtc_id;
+ return raw_notifier_chain_register(&vtg->notifier_list, nb);
+}
+EXPORT_SYMBOL(sti_vtg_register_client);
+
+int sti_vtg_unregister_client(struct sti_vtg *vtg, struct notifier_block *nb)
+{
+ if (vtg->slave)
+ return sti_vtg_unregister_client(vtg->slave, nb);
+
+ return raw_notifier_chain_unregister(&vtg->notifier_list, nb);
+}
+EXPORT_SYMBOL(sti_vtg_unregister_client);
+
+static irqreturn_t vtg_irq_thread(int irq, void *arg)
+{
+ struct sti_vtg *vtg = arg;
+ u32 event;
+
+ event = (vtg->irq_status & VTG_IRQ_TOP) ?
+ VTG_TOP_FIELD_EVENT : VTG_BOTTOM_FIELD_EVENT;
+
+ raw_notifier_call_chain(&vtg->notifier_list, event, &vtg->crtc_id);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t vtg_irq(int irq, void *arg)
+{
+ struct sti_vtg *vtg = arg;
+
+ vtg->irq_status = readl(vtg->regs + VTG_HOST_ITS);
+
+ writel(vtg->irq_status, vtg->regs + VTG_HOST_ITS_BCLR);
+
+ /* force sync bus write */
+ readl(vtg->regs + VTG_HOST_ITS);
+
+ return IRQ_WAKE_THREAD;
+}
+
+static int vtg_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np;
+ struct sti_vtg *vtg;
+ struct resource *res;
+ char irq_name[32];
+ int ret;
+
+ vtg = devm_kzalloc(dev, sizeof(*vtg), GFP_KERNEL);
+ if (!vtg)
+ return -ENOMEM;
+
+ vtg->dev = dev;
+ vtg->np = pdev->dev.of_node;
+
+ /* Get Memory ressources */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ DRM_ERROR("Get memory resource failed\n");
+ return -ENOMEM;
+ }
+ vtg->regs = devm_ioremap_nocache(dev, res->start, resource_size(res));
+
+ np = of_parse_phandle(pdev->dev.of_node, "st,slave", 0);
+ if (np) {
+ vtg->slave = of_vtg_find(np);
+
+ if (!vtg->slave)
+ return -EPROBE_DEFER;
+ } else {
+ vtg->irq = platform_get_irq(pdev, 0);
+ if (IS_ERR_VALUE(vtg->irq)) {
+ DRM_ERROR("Failed to get VTG interrupt\n");
+ return vtg->irq;
+ }
+
+ snprintf(irq_name, sizeof(irq_name), "vsync-%s",
+ dev_name(vtg->dev));
+
+ RAW_INIT_NOTIFIER_HEAD(&vtg->notifier_list);
+
+ ret = devm_request_threaded_irq(dev, vtg->irq, vtg_irq,
+ vtg_irq_thread, IRQF_ONESHOT, irq_name, vtg);
+ if (IS_ERR_VALUE(ret)) {
+ DRM_ERROR("Failed to register VTG interrupt\n");
+ return ret;
+ }
+ }
+
+ vtg_register(vtg);
+ platform_set_drvdata(pdev, vtg);
+
+ DRM_INFO("%s %s\n", __func__, dev_name(vtg->dev));
+
+ return 0;
+}
+
+static int vtg_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static const struct of_device_id vtg_of_match[] = {
+ { .compatible = "st,vtg", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vtg_of_match);
+
+struct platform_driver sti_vtg_driver = {
+ .driver = {
+ .name = "sti-vtg",
+ .owner = THIS_MODULE,
+ .of_match_table = vtg_of_match,
+ },
+ .probe = vtg_probe,
+ .remove = vtg_remove,
+};
+
+module_platform_driver(sti_vtg_driver);
+
+MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/sti/sti_vtg.h b/drivers/gpu/drm/sti/sti_vtg.h
new file mode 100644
index 0000000..e84d23f
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_vtg.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_VTG_H_
+#define _STI_VTG_H_
+
+#define VTG_TOP_FIELD_EVENT 1
+#define VTG_BOTTOM_FIELD_EVENT 2
+
+struct sti_vtg;
+struct drm_display_mode;
+struct notifier_block;
+
+struct sti_vtg *of_vtg_find(struct device_node *np);
+void sti_vtg_set_config(struct sti_vtg *vtg,
+ const struct drm_display_mode *mode);
+int sti_vtg_register_client(struct sti_vtg *vtg,
+ struct notifier_block *nb, int crtc_id);
+int sti_vtg_unregister_client(struct sti_vtg *vtg,
+ struct notifier_block *nb);
+
+u32 sti_vtg_get_line_number(struct drm_display_mode mode, int y);
+u32 sti_vtg_get_pixel_number(struct drm_display_mode mode, int x);
+
+#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v8 03/11] drm: sti: add VTAC drivers
2014-07-30 17:41 [PATCH v8 00/11] Add DRM for stih4xx platforms Benjamin Gaignard
2014-07-30 17:41 ` [PATCH v8 01/11] drm: sti: add bindings for DRM driver Benjamin Gaignard
2014-07-30 17:41 ` [PATCH v8 02/11] drm: sti: add VTG driver Benjamin Gaignard
@ 2014-07-30 17:41 ` Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 04/11] drm: sti: add HDMI driver Benjamin Gaignard
` (7 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-30 17:41 UTC (permalink / raw)
To: dri-devel, linaro-mm-sig, linux-kernel, airlied; +Cc: Benjamin Gaignard
Video Traffic Advance Communication Rx and Tx drivers are designed
for inter-die communication.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
---
drivers/gpu/drm/sti/Makefile | 3 +-
drivers/gpu/drm/sti/sti_vtac.c | 215 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 217 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/sti/sti_vtac.c
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
index 1759c20..1534d4c 100644
--- a/drivers/gpu/drm/sti/Makefile
+++ b/drivers/gpu/drm/sti/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_DRM_STI) = \
- sti_vtg.o
+ sti_vtg.o \
+ sti_vtac.o
\ No newline at end of file
diff --git a/drivers/gpu/drm/sti/sti_vtac.c b/drivers/gpu/drm/sti/sti_vtac.c
new file mode 100644
index 0000000..82a51d4
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_vtac.c
@@ -0,0 +1,215 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <drm/drmP.h>
+
+/* registers offset */
+#define VTAC_CONFIG 0x00
+#define VTAC_RX_FIFO_CONFIG 0x04
+#define VTAC_FIFO_CONFIG_VAL 0x04
+
+#define VTAC_SYS_CFG8521 0x824
+#define VTAC_SYS_CFG8522 0x828
+
+/* Number of phyts per pixel */
+#define VTAC_2_5_PPP 0x0005
+#define VTAC_3_PPP 0x0006
+#define VTAC_4_PPP 0x0008
+#define VTAC_5_PPP 0x000A
+#define VTAC_6_PPP 0x000C
+#define VTAC_13_PPP 0x001A
+#define VTAC_14_PPP 0x001C
+#define VTAC_15_PPP 0x001E
+#define VTAC_16_PPP 0x0020
+#define VTAC_17_PPP 0x0022
+#define VTAC_18_PPP 0x0024
+
+/* enable bits */
+#define VTAC_ENABLE 0x3003
+
+#define VTAC_TX_PHY_ENABLE_CLK_PHY BIT(0)
+#define VTAC_TX_PHY_ENABLE_CLK_DLL BIT(1)
+#define VTAC_TX_PHY_PLL_NOT_OSC_MODE BIT(3)
+#define VTAC_TX_PHY_RST_N_DLL_SWITCH BIT(4)
+#define VTAC_TX_PHY_PROG_N3 BIT(9)
+
+
+/**
+ * VTAC mode structure
+ *
+ * @vid_in_width: Video Data Resolution
+ * @phyts_width: Width of phyt buses(phyt low and phyt high).
+ * @phyts_per_pixel: Number of phyts sent per pixel
+ */
+struct sti_vtac_mode {
+ u32 vid_in_width;
+ u32 phyts_width;
+ u32 phyts_per_pixel;
+};
+
+static const struct sti_vtac_mode vtac_mode_main = {0x2, 0x2, VTAC_5_PPP};
+static const struct sti_vtac_mode vtac_mode_aux = {0x1, 0x0, VTAC_17_PPP};
+
+/**
+ * VTAC structure
+ *
+ * @dev: pointer to device structure
+ * @regs: ioremapped registers for RX and TX devices
+ * @phy_regs: phy registers for TX device
+ * @clk: clock
+ * @mode: main or auxillary configuration mode
+ */
+struct sti_vtac {
+ struct device *dev;
+ void __iomem *regs;
+ void __iomem *phy_regs;
+ struct clk *clk;
+ const struct sti_vtac_mode *mode;
+};
+
+static void sti_vtac_rx_set_config(struct sti_vtac *vtac)
+{
+ u32 config;
+
+ /* Enable VTAC clock */
+ if (clk_prepare_enable(vtac->clk))
+ DRM_ERROR("Failed to prepare/enable vtac_rx clock.\n");
+
+ writel(VTAC_FIFO_CONFIG_VAL, vtac->regs + VTAC_RX_FIFO_CONFIG);
+
+ config = VTAC_ENABLE;
+ config |= vtac->mode->vid_in_width << 4;
+ config |= vtac->mode->phyts_width << 16;
+ config |= vtac->mode->phyts_per_pixel << 23;
+ writel(config, vtac->regs + VTAC_CONFIG);
+}
+
+static void sti_vtac_tx_set_config(struct sti_vtac *vtac)
+{
+ u32 phy_config;
+ u32 config;
+
+ /* Enable VTAC clock */
+ if (clk_prepare_enable(vtac->clk))
+ DRM_ERROR("Failed to prepare/enable vtac_tx clock.\n");
+
+ /* Configure vtac phy */
+ phy_config = 0x00000000;
+ writel(phy_config, vtac->phy_regs + VTAC_SYS_CFG8522);
+ phy_config = VTAC_TX_PHY_ENABLE_CLK_PHY;
+ writel(phy_config, vtac->phy_regs + VTAC_SYS_CFG8521);
+ phy_config = readl(vtac->phy_regs + VTAC_SYS_CFG8521);
+ phy_config |= VTAC_TX_PHY_PROG_N3;
+ writel(phy_config, vtac->phy_regs + VTAC_SYS_CFG8521);
+ phy_config = readl(vtac->phy_regs + VTAC_SYS_CFG8521);
+ phy_config |= VTAC_TX_PHY_ENABLE_CLK_DLL;
+ writel(phy_config, vtac->phy_regs + VTAC_SYS_CFG8521);
+ phy_config = readl(vtac->phy_regs + VTAC_SYS_CFG8521);
+ phy_config |= VTAC_TX_PHY_RST_N_DLL_SWITCH;
+ writel(phy_config, vtac->phy_regs + VTAC_SYS_CFG8521);
+ phy_config = readl(vtac->phy_regs + VTAC_SYS_CFG8521);
+ phy_config |= VTAC_TX_PHY_PLL_NOT_OSC_MODE;
+ writel(phy_config, vtac->phy_regs + VTAC_SYS_CFG8521);
+
+ /* Configure vtac tx */
+ config = VTAC_ENABLE;
+ config |= vtac->mode->vid_in_width << 4;
+ config |= vtac->mode->phyts_width << 16;
+ config |= vtac->mode->phyts_per_pixel << 23;
+ writel(config, vtac->regs + VTAC_CONFIG);
+}
+
+static const struct of_device_id vtac_of_match[] = {
+ {
+ .compatible = "st,vtac-main",
+ .data = &vtac_mode_main,
+ }, {
+ .compatible = "st,vtac-aux",
+ .data = &vtac_mode_aux,
+ }, {
+ /* end node */
+ }
+};
+MODULE_DEVICE_TABLE(of, vtac_of_match);
+
+static int sti_vtac_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ const struct of_device_id *id;
+ struct sti_vtac *vtac;
+ struct resource *res;
+
+ vtac = devm_kzalloc(dev, sizeof(*vtac), GFP_KERNEL);
+ if (!vtac)
+ return -ENOMEM;
+
+ vtac->dev = dev;
+
+ id = of_match_node(vtac_of_match, np);
+ if (!id)
+ return -ENOMEM;
+
+ vtac->mode = id->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ DRM_ERROR("Invalid resource\n");
+ return -ENOMEM;
+ }
+ vtac->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(vtac->regs))
+ return PTR_ERR(vtac->regs);
+
+
+ vtac->clk = devm_clk_get(dev, "vtac");
+ if (IS_ERR(vtac->clk)) {
+ DRM_ERROR("Cannot get vtac clock\n");
+ return PTR_ERR(vtac->clk);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res) {
+ vtac->phy_regs = devm_ioremap_nocache(dev, res->start,
+ resource_size(res));
+ sti_vtac_tx_set_config(vtac);
+ } else {
+
+ sti_vtac_rx_set_config(vtac);
+ }
+
+ platform_set_drvdata(pdev, vtac);
+ DRM_INFO("%s %s\n", __func__, dev_name(vtac->dev));
+
+ return 0;
+}
+
+static int sti_vtac_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+struct platform_driver sti_vtac_driver = {
+ .driver = {
+ .name = "sti-vtac",
+ .owner = THIS_MODULE,
+ .of_match_table = vtac_of_match,
+ },
+ .probe = sti_vtac_probe,
+ .remove = sti_vtac_remove,
+};
+
+module_platform_driver(sti_vtac_driver);
+
+MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver");
+MODULE_LICENSE("GPL");
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v8 04/11] drm: sti: add HDMI driver
2014-07-30 17:41 [PATCH v8 00/11] Add DRM for stih4xx platforms Benjamin Gaignard
` (2 preceding siblings ...)
2014-07-30 17:41 ` [PATCH v8 03/11] drm: sti: add VTAC drivers Benjamin Gaignard
@ 2014-07-30 17:42 ` Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 05/11] drm: sti: add HDA driver Benjamin Gaignard
` (6 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-30 17:42 UTC (permalink / raw)
To: dri-devel, linaro-mm-sig, linux-kernel, airlied; +Cc: Benjamin Gaignard
Add driver for HDMI output.
HDMI PHY registers are mixed into HDMI device registers
and their is only one IRQ for all this hardware block.
That is why PHYs aren't using phy framework but only a
thin hdmi_phy_ops structure with start and stop functions.
HDMI driver is mapped on drm_bridge and drm_connector structures.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
---
drivers/gpu/drm/sti/Makefile | 7 +-
drivers/gpu/drm/sti/sti_hdmi.c | 810 +++++++++++++++++++++++++++++
drivers/gpu/drm/sti/sti_hdmi.h | 88 ++++
drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c | 336 ++++++++++++
drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h | 14 +
drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c | 211 ++++++++
drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h | 14 +
7 files changed, 1479 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/sti/sti_hdmi.c
create mode 100644 drivers/gpu/drm/sti/sti_hdmi.h
create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c
create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h
create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c
create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
index 1534d4c..12e1a07 100644
--- a/drivers/gpu/drm/sti/Makefile
+++ b/drivers/gpu/drm/sti/Makefile
@@ -1,3 +1,8 @@
+stihdmi-y := sti_hdmi.o \
+ sti_hdmi_tx3g0c55phy.o \
+ sti_hdmi_tx3g4c28phy.o \
+
obj-$(CONFIG_DRM_STI) = \
sti_vtg.o \
- sti_vtac.o
\ No newline at end of file
+ sti_vtac.o \
+ stihdmi.o
\ No newline at end of file
diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
new file mode 100644
index 0000000..284e541
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hdmi.c
@@ -0,0 +1,810 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/hdmi.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+
+#include "sti_hdmi.h"
+#include "sti_hdmi_tx3g4c28phy.h"
+#include "sti_hdmi_tx3g0c55phy.h"
+#include "sti_vtg.h"
+
+#define HDMI_CFG 0x0000
+#define HDMI_INT_EN 0x0004
+#define HDMI_INT_STA 0x0008
+#define HDMI_INT_CLR 0x000C
+#define HDMI_STA 0x0010
+#define HDMI_ACTIVE_VID_XMIN 0x0100
+#define HDMI_ACTIVE_VID_XMAX 0x0104
+#define HDMI_ACTIVE_VID_YMIN 0x0108
+#define HDMI_ACTIVE_VID_YMAX 0x010C
+#define HDMI_DFLT_CHL0_DAT 0x0110
+#define HDMI_DFLT_CHL1_DAT 0x0114
+#define HDMI_DFLT_CHL2_DAT 0x0118
+#define HDMI_SW_DI_1_HEAD_WORD 0x0210
+#define HDMI_SW_DI_1_PKT_WORD0 0x0214
+#define HDMI_SW_DI_1_PKT_WORD1 0x0218
+#define HDMI_SW_DI_1_PKT_WORD2 0x021C
+#define HDMI_SW_DI_1_PKT_WORD3 0x0220
+#define HDMI_SW_DI_1_PKT_WORD4 0x0224
+#define HDMI_SW_DI_1_PKT_WORD5 0x0228
+#define HDMI_SW_DI_1_PKT_WORD6 0x022C
+#define HDMI_SW_DI_CFG 0x0230
+
+#define HDMI_IFRAME_SLOT_AVI 1
+
+#define XCAT(prefix, x, suffix) prefix ## x ## suffix
+#define HDMI_SW_DI_N_HEAD_WORD(x) XCAT(HDMI_SW_DI_, x, _HEAD_WORD)
+#define HDMI_SW_DI_N_PKT_WORD0(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD0)
+#define HDMI_SW_DI_N_PKT_WORD1(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD1)
+#define HDMI_SW_DI_N_PKT_WORD2(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD2)
+#define HDMI_SW_DI_N_PKT_WORD3(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD3)
+#define HDMI_SW_DI_N_PKT_WORD4(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD4)
+#define HDMI_SW_DI_N_PKT_WORD5(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD5)
+#define HDMI_SW_DI_N_PKT_WORD6(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD6)
+
+#define HDMI_IFRAME_DISABLED 0x0
+#define HDMI_IFRAME_SINGLE_SHOT 0x1
+#define HDMI_IFRAME_FIELD 0x2
+#define HDMI_IFRAME_FRAME 0x3
+#define HDMI_IFRAME_MASK 0x3
+#define HDMI_IFRAME_CFG_DI_N(x, n) ((x) << ((n-1)*4)) /* n from 1 to 6 */
+
+#define HDMI_CFG_DEVICE_EN BIT(0)
+#define HDMI_CFG_HDMI_NOT_DVI BIT(1)
+#define HDMI_CFG_HDCP_EN BIT(2)
+#define HDMI_CFG_ESS_NOT_OESS BIT(3)
+#define HDMI_CFG_H_SYNC_POL_NEG BIT(4)
+#define HDMI_CFG_SINK_TERM_DET_EN BIT(5)
+#define HDMI_CFG_V_SYNC_POL_NEG BIT(6)
+#define HDMI_CFG_422_EN BIT(8)
+#define HDMI_CFG_FIFO_OVERRUN_CLR BIT(12)
+#define HDMI_CFG_FIFO_UNDERRUN_CLR BIT(13)
+#define HDMI_CFG_SW_RST_EN BIT(31)
+
+#define HDMI_INT_GLOBAL BIT(0)
+#define HDMI_INT_SW_RST BIT(1)
+#define HDMI_INT_PIX_CAP BIT(3)
+#define HDMI_INT_HOT_PLUG BIT(4)
+#define HDMI_INT_DLL_LCK BIT(5)
+#define HDMI_INT_NEW_FRAME BIT(6)
+#define HDMI_INT_GENCTRL_PKT BIT(7)
+#define HDMI_INT_SINK_TERM_PRESENT BIT(11)
+
+#define HDMI_DEFAULT_INT (HDMI_INT_SINK_TERM_PRESENT \
+ | HDMI_INT_DLL_LCK \
+ | HDMI_INT_HOT_PLUG \
+ | HDMI_INT_GLOBAL)
+
+#define HDMI_WORKING_INT (HDMI_INT_SINK_TERM_PRESENT \
+ | HDMI_INT_GENCTRL_PKT \
+ | HDMI_INT_NEW_FRAME \
+ | HDMI_INT_DLL_LCK \
+ | HDMI_INT_HOT_PLUG \
+ | HDMI_INT_PIX_CAP \
+ | HDMI_INT_SW_RST \
+ | HDMI_INT_GLOBAL)
+
+#define HDMI_STA_SW_RST BIT(1)
+
+struct sti_hdmi_connector {
+ struct drm_connector drm_connector;
+ struct drm_encoder *encoder;
+ struct sti_hdmi *hdmi;
+};
+
+#define to_sti_hdmi_connector(x) \
+ container_of(x, struct sti_hdmi_connector, drm_connector)
+
+u32 hdmi_read(struct sti_hdmi *hdmi, int offset)
+{
+ return readl(hdmi->regs + offset);
+}
+
+void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset)
+{
+ writel(val, hdmi->regs + offset);
+}
+
+/**
+ * HDMI interrupt handler threaded
+ *
+ * @irq: irq number
+ * @arg: connector structure
+ */
+static irqreturn_t hdmi_irq_thread(int irq, void *arg)
+{
+ struct sti_hdmi *hdmi = arg;
+
+ /* Hot plug/unplug IRQ */
+ if (hdmi->irq_status & HDMI_INT_HOT_PLUG) {
+ /* read gpio to get the status */
+ hdmi->hpd = gpio_get_value(hdmi->hpd_gpio);
+ if (hdmi->drm_dev)
+ drm_helper_hpd_irq_event(hdmi->drm_dev);
+ }
+
+ /* Sw reset and PLL lock are exclusive so we can use the same
+ * event to signal them
+ */
+ if (hdmi->irq_status & (HDMI_INT_SW_RST | HDMI_INT_DLL_LCK)) {
+ hdmi->event_received = true;
+ wake_up_interruptible(&hdmi->wait_event);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * HDMI interrupt handler
+ *
+ * @irq: irq number
+ * @arg: connector structure
+ */
+static irqreturn_t hdmi_irq(int irq, void *arg)
+{
+ struct sti_hdmi *hdmi = arg;
+
+ /* read interrupt status */
+ hdmi->irq_status = hdmi_read(hdmi, HDMI_INT_STA);
+
+ /* clear interrupt status */
+ hdmi_write(hdmi, hdmi->irq_status, HDMI_INT_CLR);
+
+ /* force sync bus write */
+ hdmi_read(hdmi, HDMI_INT_STA);
+
+ return IRQ_WAKE_THREAD;
+}
+
+/**
+ * Set hdmi active area depending on the drm display mode selected
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ */
+static void hdmi_active_area(struct sti_hdmi *hdmi)
+{
+ u32 xmin, xmax;
+ u32 ymin, ymax;
+
+ xmin = sti_vtg_get_pixel_number(hdmi->mode, 0);
+ xmax = sti_vtg_get_pixel_number(hdmi->mode, hdmi->mode.hdisplay - 1);
+ ymin = sti_vtg_get_line_number(hdmi->mode, 0);
+ ymax = sti_vtg_get_line_number(hdmi->mode, hdmi->mode.vdisplay - 1);
+
+ hdmi_write(hdmi, xmin, HDMI_ACTIVE_VID_XMIN);
+ hdmi_write(hdmi, xmax, HDMI_ACTIVE_VID_XMAX);
+ hdmi_write(hdmi, ymin, HDMI_ACTIVE_VID_YMIN);
+ hdmi_write(hdmi, ymax, HDMI_ACTIVE_VID_YMAX);
+}
+
+/**
+ * Overall hdmi configuration
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ */
+static void hdmi_config(struct sti_hdmi *hdmi)
+{
+ u32 conf;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Clear overrun and underrun fifo */
+ conf = HDMI_CFG_FIFO_OVERRUN_CLR | HDMI_CFG_FIFO_UNDERRUN_CLR;
+
+ /* Enable HDMI mode not DVI */
+ conf |= HDMI_CFG_HDMI_NOT_DVI | HDMI_CFG_ESS_NOT_OESS;
+
+ /* Enable sink term detection */
+ conf |= HDMI_CFG_SINK_TERM_DET_EN;
+
+ /* Set Hsync polarity */
+ if (hdmi->mode.flags & DRM_MODE_FLAG_NHSYNC) {
+ DRM_DEBUG_DRIVER("H Sync Negative\n");
+ conf |= HDMI_CFG_H_SYNC_POL_NEG;
+ }
+
+ /* Set Vsync polarity */
+ if (hdmi->mode.flags & DRM_MODE_FLAG_NVSYNC) {
+ DRM_DEBUG_DRIVER("V Sync Negative\n");
+ conf |= HDMI_CFG_V_SYNC_POL_NEG;
+ }
+
+ /* Enable HDMI */
+ conf |= HDMI_CFG_DEVICE_EN;
+
+ hdmi_write(hdmi, conf, HDMI_CFG);
+}
+
+/**
+ * Prepare and configure the AVI infoframe
+ *
+ * AVI infoframe are transmitted at least once per two video field and
+ * contains information about HDMI transmission mode such as color space,
+ * colorimetry, ...
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ *
+ * Return negative value if error occurs
+ */
+static int hdmi_avi_infoframe_config(struct sti_hdmi *hdmi)
+{
+ struct drm_display_mode *mode = &hdmi->mode;
+ struct hdmi_avi_infoframe infoframe;
+ u8 buffer[HDMI_INFOFRAME_SIZE(AVI)];
+ u8 *frame = buffer + HDMI_INFOFRAME_HEADER_SIZE;
+ u32 val;
+ int ret;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ ret = drm_hdmi_avi_infoframe_from_display_mode(&infoframe, mode);
+ if (ret < 0) {
+ DRM_ERROR("failed to setup AVI infoframe: %d\n", ret);
+ return ret;
+ }
+
+ /* fixed infoframe configuration not linked to the mode */
+ infoframe.colorspace = HDMI_COLORSPACE_RGB;
+ infoframe.quantization_range = HDMI_QUANTIZATION_RANGE_DEFAULT;
+ infoframe.colorimetry = HDMI_COLORIMETRY_NONE;
+
+ ret = hdmi_avi_infoframe_pack(&infoframe, buffer, sizeof(buffer));
+ if (ret < 0) {
+ DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
+ return ret;
+ }
+
+ /* Disable transmission slot for AVI infoframe */
+ val = hdmi_read(hdmi, HDMI_SW_DI_CFG);
+ val &= ~HDMI_IFRAME_CFG_DI_N(HDMI_IFRAME_MASK, HDMI_IFRAME_SLOT_AVI);
+ hdmi_write(hdmi, val, HDMI_SW_DI_CFG);
+
+ /* Infoframe header */
+ val = buffer[0x0];
+ val |= buffer[0x1] << 8;
+ val |= buffer[0x2] << 16;
+ hdmi_write(hdmi, val, HDMI_SW_DI_N_HEAD_WORD(HDMI_IFRAME_SLOT_AVI));
+
+ /* Infoframe packet bytes */
+ val = frame[0x0];
+ val |= frame[0x1] << 8;
+ val |= frame[0x2] << 16;
+ val |= frame[0x3] << 24;
+ hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD0(HDMI_IFRAME_SLOT_AVI));
+
+ val = frame[0x4];
+ val |= frame[0x5] << 8;
+ val |= frame[0x6] << 16;
+ val |= frame[0x7] << 24;
+ hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD1(HDMI_IFRAME_SLOT_AVI));
+
+ val = frame[0x8];
+ val |= frame[0x9] << 8;
+ val |= frame[0xA] << 16;
+ val |= frame[0xB] << 24;
+ hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD2(HDMI_IFRAME_SLOT_AVI));
+
+ val = frame[0xC];
+ val |= frame[0xD] << 8;
+ hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD3(HDMI_IFRAME_SLOT_AVI));
+
+ /* Enable transmission slot for AVI infoframe
+ * According to the hdmi specification, AVI infoframe should be
+ * transmitted at least once per two video fields
+ */
+ val = hdmi_read(hdmi, HDMI_SW_DI_CFG);
+ val |= HDMI_IFRAME_CFG_DI_N(HDMI_IFRAME_FIELD, HDMI_IFRAME_SLOT_AVI);
+ hdmi_write(hdmi, val, HDMI_SW_DI_CFG);
+
+ return 0;
+}
+
+/**
+ * Software reset of the hdmi subsystem
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ *
+ */
+#define HDMI_TIMEOUT_SWRESET 100 /*milliseconds */
+static void hdmi_swreset(struct sti_hdmi *hdmi)
+{
+ u32 val;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Enable hdmi_audio clock only during hdmi reset */
+ if (clk_prepare_enable(hdmi->clk_audio))
+ DRM_INFO("Failed to prepare/enable hdmi_audio clk\n");
+
+ /* Sw reset */
+ hdmi->event_received = false;
+
+ val = hdmi_read(hdmi, HDMI_CFG);
+ val |= HDMI_CFG_SW_RST_EN;
+ hdmi_write(hdmi, val, HDMI_CFG);
+
+ /* Wait reset completed */
+ wait_event_interruptible_timeout(hdmi->wait_event,
+ hdmi->event_received == true,
+ msecs_to_jiffies
+ (HDMI_TIMEOUT_SWRESET));
+
+ /*
+ * HDMI_STA_SW_RST bit is set to '1' when SW_RST bit in HDMI_CFG is
+ * set to '1' and clk_audio is running.
+ */
+ if ((hdmi_read(hdmi, HDMI_STA) & HDMI_STA_SW_RST) == 0)
+ DRM_DEBUG_DRIVER("Warning: HDMI sw reset timeout occurs\n");
+
+ val = hdmi_read(hdmi, HDMI_CFG);
+ val &= ~HDMI_CFG_SW_RST_EN;
+ hdmi_write(hdmi, val, HDMI_CFG);
+
+ /* Disable hdmi_audio clock. Not used anymore for drm purpose */
+ clk_disable_unprepare(hdmi->clk_audio);
+}
+
+static void sti_hdmi_disable(struct drm_bridge *bridge)
+{
+ struct sti_hdmi *hdmi = bridge->driver_private;
+
+ u32 val = hdmi_read(hdmi, HDMI_CFG);
+
+ if (!hdmi->enabled)
+ return;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Disable HDMI */
+ val &= ~HDMI_CFG_DEVICE_EN;
+ hdmi_write(hdmi, val, HDMI_CFG);
+
+ hdmi_write(hdmi, 0xffffffff, HDMI_INT_CLR);
+
+ /* Stop the phy */
+ hdmi->phy_ops->stop(hdmi);
+
+ /* Set the default channel data to be a dark red */
+ hdmi_write(hdmi, 0x0000, HDMI_DFLT_CHL0_DAT);
+ hdmi_write(hdmi, 0x0000, HDMI_DFLT_CHL1_DAT);
+ hdmi_write(hdmi, 0x0060, HDMI_DFLT_CHL2_DAT);
+
+ /* Disable/unprepare hdmi clock */
+ clk_disable_unprepare(hdmi->clk_phy);
+ clk_disable_unprepare(hdmi->clk_tmds);
+ clk_disable_unprepare(hdmi->clk_pix);
+
+ hdmi->enabled = false;
+}
+
+static void sti_hdmi_pre_enable(struct drm_bridge *bridge)
+{
+ struct sti_hdmi *hdmi = bridge->driver_private;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ if (hdmi->enabled)
+ return;
+
+ /* Prepare/enable clocks */
+ if (clk_prepare_enable(hdmi->clk_pix))
+ DRM_ERROR("Failed to prepare/enable hdmi_pix clk\n");
+ if (clk_prepare_enable(hdmi->clk_tmds))
+ DRM_ERROR("Failed to prepare/enable hdmi_tmds clk\n");
+ if (clk_prepare_enable(hdmi->clk_phy))
+ DRM_ERROR("Failed to prepare/enable hdmi_rejec_pll clk\n");
+
+ hdmi->enabled = true;
+
+ /* Program hdmi serializer and start phy */
+ if (!hdmi->phy_ops->start(hdmi)) {
+ DRM_ERROR("Unable to start hdmi phy\n");
+ return;
+ }
+
+ /* Program hdmi active area */
+ hdmi_active_area(hdmi);
+
+ /* Enable working interrupts */
+ hdmi_write(hdmi, HDMI_WORKING_INT, HDMI_INT_EN);
+
+ /* Program hdmi config */
+ hdmi_config(hdmi);
+
+ /* Program AVI infoframe */
+ if (hdmi_avi_infoframe_config(hdmi))
+ DRM_ERROR("Unable to configure AVI infoframe\n");
+
+ /* Sw reset */
+ hdmi_swreset(hdmi);
+}
+
+static void sti_hdmi_set_mode(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct sti_hdmi *hdmi = bridge->driver_private;
+ int ret;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Copy the drm display mode in the connector local structure */
+ memcpy(&hdmi->mode, mode, sizeof(struct drm_display_mode));
+
+ /* Update clock framerate according to the selected mode */
+ ret = clk_set_rate(hdmi->clk_pix, mode->clock * 1000);
+ if (ret < 0) {
+ DRM_ERROR("Cannot set rate (%dHz) for hdmi_pix clk\n",
+ mode->clock * 1000);
+ return;
+ }
+ ret = clk_set_rate(hdmi->clk_phy, mode->clock * 1000);
+ if (ret < 0) {
+ DRM_ERROR("Cannot set rate (%dHz) for hdmi_rejection_pll clk\n",
+ mode->clock * 1000);
+ return;
+ }
+}
+
+static void sti_hdmi_bridge_nope(struct drm_bridge *bridge)
+{
+ /* do nothing */
+}
+
+static void sti_hdmi_brigde_destroy(struct drm_bridge *bridge)
+{
+ drm_bridge_cleanup(bridge);
+ kfree(bridge);
+}
+
+static const struct drm_bridge_funcs sti_hdmi_bridge_funcs = {
+ .pre_enable = sti_hdmi_pre_enable,
+ .enable = sti_hdmi_bridge_nope,
+ .disable = sti_hdmi_disable,
+ .post_disable = sti_hdmi_bridge_nope,
+ .mode_set = sti_hdmi_set_mode,
+ .destroy = sti_hdmi_brigde_destroy,
+};
+
+static int sti_hdmi_connector_get_modes(struct drm_connector *connector)
+{
+ struct i2c_adapter *i2c_adap;
+ struct edid *edid;
+ int count;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ i2c_adap = i2c_get_adapter(1);
+ if (!i2c_adap)
+ goto fail;
+
+ edid = drm_get_edid(connector, i2c_adap);
+ if (!edid)
+ goto fail;
+
+ count = drm_add_edid_modes(connector, edid);
+ drm_mode_connector_update_edid_property(connector, edid);
+
+ kfree(edid);
+ return count;
+
+fail:
+ DRM_ERROR("Can not read HDMI EDID\n");
+ return 0;
+}
+
+#define CLK_TOLERANCE_HZ 50
+
+static int sti_hdmi_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ int target = mode->clock * 1000;
+ int target_min = target - CLK_TOLERANCE_HZ;
+ int target_max = target + CLK_TOLERANCE_HZ;
+ int result;
+ struct sti_hdmi_connector *hdmi_connector
+ = to_sti_hdmi_connector(connector);
+ struct sti_hdmi *hdmi = hdmi_connector->hdmi;
+
+
+ result = clk_round_rate(hdmi->clk_pix, target);
+
+ DRM_DEBUG_DRIVER("target rate = %d => available rate = %d\n",
+ target, result);
+
+ if ((result < target_min) || (result > target_max)) {
+ DRM_DEBUG_DRIVER("hdmi pixclk=%d not supported\n", target);
+ return MODE_BAD;
+ }
+
+ return MODE_OK;
+}
+
+struct drm_encoder *sti_hdmi_best_encoder(struct drm_connector *connector)
+{
+ struct sti_hdmi_connector *hdmi_connector
+ = to_sti_hdmi_connector(connector);
+
+ /* Best encoder is the one associated during connector creation */
+ return hdmi_connector->encoder;
+}
+
+static struct drm_connector_helper_funcs sti_hdmi_connector_helper_funcs = {
+ .get_modes = sti_hdmi_connector_get_modes,
+ .mode_valid = sti_hdmi_connector_mode_valid,
+ .best_encoder = sti_hdmi_best_encoder,
+};
+
+/* get detection status of display device */
+static enum drm_connector_status
+sti_hdmi_connector_detect(struct drm_connector *connector, bool force)
+{
+ struct sti_hdmi_connector *hdmi_connector
+ = to_sti_hdmi_connector(connector);
+ struct sti_hdmi *hdmi = hdmi_connector->hdmi;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ if (hdmi->hpd) {
+ DRM_DEBUG_DRIVER("hdmi cable connected\n");
+ return connector_status_connected;
+ }
+
+ DRM_DEBUG_DRIVER("hdmi cable disconnected\n");
+ return connector_status_disconnected;
+}
+
+static void sti_hdmi_connector_destroy(struct drm_connector *connector)
+{
+ struct sti_hdmi_connector *hdmi_connector
+ = to_sti_hdmi_connector(connector);
+
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+ kfree(hdmi_connector);
+}
+
+static struct drm_connector_funcs sti_hdmi_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = sti_hdmi_connector_detect,
+ .destroy = sti_hdmi_connector_destroy,
+};
+
+static struct drm_encoder *sti_hdmi_find_encoder(struct drm_device *dev)
+{
+ struct drm_encoder *encoder;
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ if (encoder->encoder_type == DRM_MODE_ENCODER_TMDS)
+ return encoder;
+ }
+
+ return NULL;
+}
+
+static int sti_hdmi_bind(struct device *dev, struct device *master, void *data)
+{
+ struct sti_hdmi *hdmi = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+ struct drm_encoder *encoder;
+ struct sti_hdmi_connector *connector;
+ struct drm_connector *drm_connector;
+ struct drm_bridge *bridge;
+ struct i2c_adapter *i2c_adap;
+ int err;
+
+ i2c_adap = i2c_get_adapter(1);
+ if (!i2c_adap)
+ return -EPROBE_DEFER;
+
+ /* Set the drm device handle */
+ hdmi->drm_dev = drm_dev;
+
+ encoder = sti_hdmi_find_encoder(drm_dev);
+ if (!encoder)
+ return -ENOMEM;
+
+ connector = devm_kzalloc(dev, sizeof(*connector), GFP_KERNEL);
+ if (!connector)
+ return -ENOMEM;
+
+ connector->hdmi = hdmi;
+
+ bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL);
+ if (!bridge)
+ return -ENOMEM;
+
+ bridge->driver_private = hdmi;
+ drm_bridge_init(drm_dev, bridge, &sti_hdmi_bridge_funcs);
+
+ encoder->bridge = bridge;
+ connector->encoder = encoder;
+
+ drm_connector = (struct drm_connector *)connector;
+
+ drm_connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+ drm_connector_init(drm_dev, drm_connector,
+ &sti_hdmi_connector_funcs, DRM_MODE_CONNECTOR_HDMIA);
+ drm_connector_helper_add(drm_connector,
+ &sti_hdmi_connector_helper_funcs);
+
+ err = drm_connector_register(drm_connector);
+ if (err)
+ goto err_connector;
+
+ err = drm_mode_connector_attach_encoder(drm_connector, encoder);
+ if (err) {
+ DRM_ERROR("Failed to attach a connector to a encoder\n");
+ goto err_sysfs;
+ }
+
+ /* Enable default interrupts */
+ hdmi_write(hdmi, HDMI_DEFAULT_INT, HDMI_INT_EN);
+
+ return 0;
+
+err_sysfs:
+ drm_connector_unregister(drm_connector);
+err_connector:
+ drm_bridge_cleanup(bridge);
+ drm_connector_cleanup(drm_connector);
+ return -EINVAL;
+}
+
+static void sti_hdmi_unbind(struct device *dev,
+ struct device *master, void *data)
+{
+ /* do nothing */
+}
+
+static const struct component_ops sti_hdmi_ops = {
+ .bind = sti_hdmi_bind,
+ .unbind = sti_hdmi_unbind,
+};
+
+static struct of_device_id hdmi_of_match[] = {
+ {
+ .compatible = "st,stih416-hdmi",
+ .data = &tx3g0c55phy_ops,
+ }, {
+ .compatible = "st,stih407-hdmi",
+ .data = &tx3g4c28phy_ops,
+ }, {
+ /* end node */
+ }
+};
+MODULE_DEVICE_TABLE(of, hdmi_of_match);
+
+static int sti_hdmi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sti_hdmi *hdmi;
+ struct device_node *np = dev->of_node;
+ struct resource *res;
+ int ret;
+
+ DRM_INFO("%s\n", __func__);
+
+ hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+ if (!hdmi)
+ return -ENOMEM;
+
+ hdmi->dev = pdev->dev;
+
+ /* Get resources */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hdmi-reg");
+ if (!res) {
+ DRM_ERROR("Invalid hdmi resource\n");
+ return -ENOMEM;
+ }
+ hdmi->regs = devm_ioremap_nocache(dev, res->start, resource_size(res));
+ if (IS_ERR(hdmi->regs))
+ return PTR_ERR(hdmi->regs);
+
+ if (of_device_is_compatible(np, "st,stih416-hdmi")) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "syscfg");
+ if (!res) {
+ DRM_ERROR("Invalid syscfg resource\n");
+ return -ENOMEM;
+ }
+ hdmi->syscfg = devm_ioremap_nocache(dev, res->start,
+ resource_size(res));
+ if (IS_ERR(hdmi->syscfg))
+ return PTR_ERR(hdmi->syscfg);
+
+ }
+
+ hdmi->phy_ops = (struct hdmi_phy_ops *)
+ of_match_node(hdmi_of_match, np)->data;
+
+ /* Get clock resources */
+ hdmi->clk_pix = devm_clk_get(dev, "pix");
+ if (IS_ERR(hdmi->clk_pix)) {
+ DRM_ERROR("Cannot get hdmi_pix clock\n");
+ return PTR_ERR(hdmi->clk_pix);
+ }
+
+ hdmi->clk_tmds = devm_clk_get(dev, "tmds");
+ if (IS_ERR(hdmi->clk_tmds)) {
+ DRM_ERROR("Cannot get hdmi_tmds clock\n");
+ return PTR_ERR(hdmi->clk_tmds);
+ }
+
+ hdmi->clk_phy = devm_clk_get(dev, "phy");
+ if (IS_ERR(hdmi->clk_phy)) {
+ DRM_ERROR("Cannot get hdmi_phy clock\n");
+ return PTR_ERR(hdmi->clk_phy);
+ }
+
+ hdmi->clk_audio = devm_clk_get(dev, "audio");
+ if (IS_ERR(hdmi->clk_audio)) {
+ DRM_ERROR("Cannot get hdmi_audio clock\n");
+ return PTR_ERR(hdmi->clk_audio);
+ }
+
+ hdmi->hpd_gpio = of_get_named_gpio(np, "hdmi,hpd-gpio", 0);
+ if (hdmi->hpd_gpio < 0) {
+ DRM_ERROR("Failed to get hdmi hpd-gpio\n");
+ return -EIO;
+ }
+
+ hdmi->hpd = gpio_get_value(hdmi->hpd_gpio);
+
+ init_waitqueue_head(&hdmi->wait_event);
+
+ hdmi->irq = platform_get_irq_byname(pdev, "irq");
+
+ ret = devm_request_threaded_irq(dev, hdmi->irq, hdmi_irq,
+ hdmi_irq_thread, IRQF_ONESHOT, dev_name(dev), hdmi);
+ if (ret) {
+ DRM_ERROR("Failed to register HDMI interrupt\n");
+ return ret;
+ }
+
+ hdmi->reset = devm_reset_control_get(dev, "hdmi");
+ /* Take hdmi out of reset */
+ if (!IS_ERR(hdmi->reset))
+ reset_control_deassert(hdmi->reset);
+
+ platform_set_drvdata(pdev, hdmi);
+
+ return component_add(&pdev->dev, &sti_hdmi_ops);
+}
+
+static int sti_hdmi_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &sti_hdmi_ops);
+ return 0;
+}
+
+struct platform_driver sti_hdmi_driver = {
+ .driver = {
+ .name = "sti-hdmi",
+ .owner = THIS_MODULE,
+ .of_match_table = hdmi_of_match,
+ },
+ .probe = sti_hdmi_probe,
+ .remove = sti_hdmi_remove,
+};
+
+module_platform_driver(sti_hdmi_driver);
+
+MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/sti/sti_hdmi.h b/drivers/gpu/drm/sti/sti_hdmi.h
new file mode 100644
index 0000000..61bec65
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hdmi.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_HDMI_H_
+#define _STI_HDMI_H_
+
+#include <linux/platform_device.h>
+
+#include <drm/drmP.h>
+
+#define HDMI_STA 0x0010
+#define HDMI_STA_DLL_LCK BIT(5)
+
+struct sti_hdmi;
+
+struct hdmi_phy_ops {
+ bool (*start)(struct sti_hdmi *hdmi);
+ void (*stop)(struct sti_hdmi *hdmi);
+};
+
+/**
+ * STI hdmi structure
+ *
+ * @dev: driver device
+ * @drm_dev: pointer to drm device
+ * @mode: current display mode selected
+ * @regs: hdmi register
+ * @syscfg: syscfg register for pll rejection configuration
+ * @clk_pix: hdmi pixel clock
+ * @clk_tmds: hdmi tmds clock
+ * @clk_phy: hdmi phy clock
+ * @clk_audio: hdmi audio clock
+ * @irq: hdmi interrupt number
+ * @irq_status: interrupt status register
+ * @phy_ops: phy start/stop operations
+ * @enabled: true if hdmi is enabled else false
+ * @hpd_gpio: hdmi hot plug detect gpio number
+ * @hpd: hot plug detect status
+ * @wait_event: wait event
+ * @event_received: wait event status
+ * @reset: reset control of the hdmi phy
+ */
+struct sti_hdmi {
+ struct device dev;
+ struct drm_device *drm_dev;
+ struct drm_display_mode mode;
+ void __iomem *regs;
+ void __iomem *syscfg;
+ struct clk *clk_pix;
+ struct clk *clk_tmds;
+ struct clk *clk_phy;
+ struct clk *clk_audio;
+ int irq;
+ u32 irq_status;
+ struct hdmi_phy_ops *phy_ops;
+ bool enabled;
+ int hpd_gpio;
+ bool hpd;
+ wait_queue_head_t wait_event;
+ bool event_received;
+ struct reset_control *reset;
+};
+
+u32 hdmi_read(struct sti_hdmi *hdmi, int offset);
+void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset);
+
+/**
+ * hdmi phy config structure
+ *
+ * A pointer to an array of these structures is passed to a TMDS (HDMI) output
+ * via the control interface to provide board and SoC specific
+ * configurations of the HDMI PHY. Each entry in the array specifies a hardware
+ * specific configuration for a given TMDS clock frequency range.
+ *
+ * @min_tmds_freq: Lower bound of TMDS clock frequency this entry applies to
+ * @max_tmds_freq: Upper bound of TMDS clock frequency this entry applies to
+ * @config: SoC specific register configuration
+ */
+struct hdmi_phy_config {
+ u32 min_tmds_freq;
+ u32 max_tmds_freq;
+ u32 config[4];
+};
+
+#endif
diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c
new file mode 100644
index 0000000..49ae8e4
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c
@@ -0,0 +1,336 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include "sti_hdmi_tx3g0c55phy.h"
+
+#define HDMI_SRZ_PLL_CFG 0x0504
+#define HDMI_SRZ_TAP_1 0x0508
+#define HDMI_SRZ_TAP_2 0x050C
+#define HDMI_SRZ_TAP_3 0x0510
+#define HDMI_SRZ_CTRL 0x0514
+
+#define HDMI_SRZ_PLL_CFG_POWER_DOWN BIT(0)
+#define HDMI_SRZ_PLL_CFG_VCOR_SHIFT 1
+#define HDMI_SRZ_PLL_CFG_VCOR_425MHZ 0
+#define HDMI_SRZ_PLL_CFG_VCOR_850MHZ 1
+#define HDMI_SRZ_PLL_CFG_VCOR_1700MHZ 2
+#define HDMI_SRZ_PLL_CFG_VCOR_3000MHZ 3
+#define HDMI_SRZ_PLL_CFG_VCOR_MASK 3
+#define HDMI_SRZ_PLL_CFG_VCOR(x) (x << HDMI_SRZ_PLL_CFG_VCOR_SHIFT)
+#define HDMI_SRZ_PLL_CFG_NDIV_SHIFT 8
+#define HDMI_SRZ_PLL_CFG_NDIV_MASK (0x1F << HDMI_SRZ_PLL_CFG_NDIV_SHIFT)
+#define HDMI_SRZ_PLL_CFG_MODE_SHIFT 16
+#define HDMI_SRZ_PLL_CFG_MODE_13_5_MHZ 0x1
+#define HDMI_SRZ_PLL_CFG_MODE_25_2_MHZ 0x4
+#define HDMI_SRZ_PLL_CFG_MODE_27_MHZ 0x5
+#define HDMI_SRZ_PLL_CFG_MODE_33_75_MHZ 0x6
+#define HDMI_SRZ_PLL_CFG_MODE_40_5_MHZ 0x7
+#define HDMI_SRZ_PLL_CFG_MODE_54_MHZ 0x8
+#define HDMI_SRZ_PLL_CFG_MODE_67_5_MHZ 0x9
+#define HDMI_SRZ_PLL_CFG_MODE_74_25_MHZ 0xA
+#define HDMI_SRZ_PLL_CFG_MODE_81_MHZ 0xB
+#define HDMI_SRZ_PLL_CFG_MODE_82_5_MHZ 0xC
+#define HDMI_SRZ_PLL_CFG_MODE_108_MHZ 0xD
+#define HDMI_SRZ_PLL_CFG_MODE_148_5_MHZ 0xE
+#define HDMI_SRZ_PLL_CFG_MODE_165_MHZ 0xF
+#define HDMI_SRZ_PLL_CFG_MODE_MASK 0xF
+#define HDMI_SRZ_PLL_CFG_MODE(x) (x << HDMI_SRZ_PLL_CFG_MODE_SHIFT)
+
+#define HDMI_SRZ_CTRL_POWER_DOWN (1 << 0)
+#define HDMI_SRZ_CTRL_EXTERNAL_DATA_EN (1 << 1)
+
+/* sysconf registers */
+#define HDMI_REJECTION_PLL_CONFIGURATION 0x0858 /* SYSTEM_CONFIG2534 */
+#define HDMI_REJECTION_PLL_STATUS 0x0948 /* SYSTEM_CONFIG2594 */
+
+#define REJECTION_PLL_HDMI_ENABLE_SHIFT 0
+#define REJECTION_PLL_HDMI_ENABLE_MASK (0x1 << REJECTION_PLL_HDMI_ENABLE_SHIFT)
+#define REJECTION_PLL_HDMI_PDIV_SHIFT 24
+#define REJECTION_PLL_HDMI_PDIV_MASK (0x7 << REJECTION_PLL_HDMI_PDIV_SHIFT)
+#define REJECTION_PLL_HDMI_NDIV_SHIFT 16
+#define REJECTION_PLL_HDMI_NDIV_MASK (0xFF << REJECTION_PLL_HDMI_NDIV_SHIFT)
+#define REJECTION_PLL_HDMI_MDIV_SHIFT 8
+#define REJECTION_PLL_HDMI_MDIV_MASK (0xFF << REJECTION_PLL_HDMI_MDIV_SHIFT)
+
+#define REJECTION_PLL_HDMI_REJ_PLL_LOCK BIT(0)
+
+#define HDMI_TIMEOUT_PLL_LOCK 50 /*milliseconds */
+
+/**
+ * pll mode structure
+ *
+ * A pointer to an array of these structures is passed to a TMDS (HDMI) output
+ * via the control interface to provide board and SoC specific
+ * configurations of the HDMI PHY. Each entry in the array specifies a hardware
+ * specific configuration for a given TMDS clock frequency range. The array
+ * should be terminated with an entry that has all fields set to zero.
+ *
+ * @min: Lower bound of TMDS clock frequency this entry applies to
+ * @max: Upper bound of TMDS clock frequency this entry applies to
+ * @mode: SoC specific register configuration
+ */
+struct pllmode {
+ u32 min;
+ u32 max;
+ u32 mode;
+};
+
+#define NB_PLL_MODE 7
+static struct pllmode pllmodes[NB_PLL_MODE] = {
+ {13500000, 13513500, HDMI_SRZ_PLL_CFG_MODE_13_5_MHZ},
+ {25174800, 25200000, HDMI_SRZ_PLL_CFG_MODE_25_2_MHZ},
+ {27000000, 27027000, HDMI_SRZ_PLL_CFG_MODE_27_MHZ},
+ {54000000, 54054000, HDMI_SRZ_PLL_CFG_MODE_54_MHZ},
+ {72000000, 74250000, HDMI_SRZ_PLL_CFG_MODE_74_25_MHZ},
+ {108000000, 108108000, HDMI_SRZ_PLL_CFG_MODE_108_MHZ},
+ {148351648, 297000000, HDMI_SRZ_PLL_CFG_MODE_148_5_MHZ}
+};
+
+#define NB_HDMI_PHY_CONFIG 5
+static struct hdmi_phy_config hdmiphy_config[NB_HDMI_PHY_CONFIG] = {
+ {0, 40000000, {0x00101010, 0x00101010, 0x00101010, 0x02} },
+ {40000000, 140000000, {0x00111111, 0x00111111, 0x00111111, 0x02} },
+ {140000000, 160000000, {0x00131313, 0x00101010, 0x00101010, 0x02} },
+ {160000000, 250000000, {0x00131313, 0x00111111, 0x00111111, 0x03FE} },
+ {250000000, 300000000, {0x00151515, 0x00101010, 0x00101010, 0x03FE} },
+};
+
+#define PLL_CHANGE_DELAY 1 /* ms */
+
+/**
+ * Disable the pll rejection
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ *
+ * return true if the pll has been disabled
+ */
+static bool disable_pll_rejection(struct sti_hdmi *hdmi)
+{
+ u32 val;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
+ val &= ~REJECTION_PLL_HDMI_ENABLE_MASK;
+ writel(val, hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
+
+ msleep(PLL_CHANGE_DELAY);
+ val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_STATUS);
+
+ return !(val & REJECTION_PLL_HDMI_REJ_PLL_LOCK);
+}
+
+/**
+ * Enable the old BCH/rejection PLL is now reused to provide the CLKPXPLL
+ * clock input to the new PHY PLL that generates the serializer clock
+ * (TMDS*10) and the TMDS clock which is now fed back into the HDMI
+ * formatter instead of the TMDS clock line from ClockGenB.
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ *
+ * return true if pll has been correctly set
+ */
+static bool enable_pll_rejection(struct sti_hdmi *hdmi)
+{
+ unsigned int inputclock;
+ u32 mdiv, ndiv, pdiv, val;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ if (!disable_pll_rejection(hdmi))
+ return false;
+
+ inputclock = hdmi->mode.clock * 1000;
+
+ DRM_DEBUG_DRIVER("hdmi rejection pll input clock = %dHz\n", inputclock);
+
+
+ /* Power up the HDMI rejection PLL
+ * Note: On this SoC (stiH416) we are forced to have the input clock
+ * be equal to the HDMI pixel clock.
+ *
+ * The values here have been suggested by validation however they are
+ * still provisional and subject to change.
+ *
+ * PLLout = (Fin*Mdiv) / ((2 * Ndiv) / 2^Pdiv)
+ */
+ if (inputclock < 50000000) {
+ /*
+ * For slower clocks we need to multiply more to keep the
+ * internal VCO frequency within the physical specification
+ * of the PLL.
+ */
+ pdiv = 4;
+ ndiv = 240;
+ mdiv = 30;
+ } else {
+ pdiv = 2;
+ ndiv = 60;
+ mdiv = 30;
+ }
+
+ val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
+
+ val &= ~(REJECTION_PLL_HDMI_PDIV_MASK |
+ REJECTION_PLL_HDMI_NDIV_MASK |
+ REJECTION_PLL_HDMI_MDIV_MASK |
+ REJECTION_PLL_HDMI_ENABLE_MASK);
+
+ val |= (pdiv << REJECTION_PLL_HDMI_PDIV_SHIFT) |
+ (ndiv << REJECTION_PLL_HDMI_NDIV_SHIFT) |
+ (mdiv << REJECTION_PLL_HDMI_MDIV_SHIFT) |
+ (0x1 << REJECTION_PLL_HDMI_ENABLE_SHIFT);
+
+ writel(val, hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
+
+ msleep(PLL_CHANGE_DELAY);
+ val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_STATUS);
+
+ return (val & REJECTION_PLL_HDMI_REJ_PLL_LOCK);
+}
+
+/**
+ * Start hdmi phy macro cell tx3g0c55
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ *
+ * Return false if an error occur
+ */
+static bool sti_hdmi_tx3g0c55phy_start(struct sti_hdmi *hdmi)
+{
+ u32 ckpxpll = hdmi->mode.clock * 1000;
+ u32 val, tmdsck, freqvco, pllctrl = 0;
+ unsigned int i;
+
+ if (!enable_pll_rejection(hdmi))
+ return false;
+
+ DRM_DEBUG_DRIVER("ckpxpll = %dHz\n", ckpxpll);
+
+ /* Assuming no pixel repetition and 24bits color */
+ tmdsck = ckpxpll;
+ pllctrl = 2 << HDMI_SRZ_PLL_CFG_NDIV_SHIFT;
+
+ /*
+ * Setup the PLL mode parameter based on the ckpxpll. If we haven't got
+ * a clock frequency supported by one of the specific PLL modes then we
+ * will end up using the generic mode (0) which only supports a 10x
+ * multiplier, hence only 24bit color.
+ */
+ for (i = 0; i < NB_PLL_MODE; i++) {
+ if (ckpxpll >= pllmodes[i].min && ckpxpll <= pllmodes[i].max)
+ pllctrl |= HDMI_SRZ_PLL_CFG_MODE(pllmodes[i].mode);
+ }
+
+ freqvco = tmdsck * 10;
+ if (freqvco <= 425000000UL)
+ pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_425MHZ);
+ else if (freqvco <= 850000000UL)
+ pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_850MHZ);
+ else if (freqvco <= 1700000000UL)
+ pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_1700MHZ);
+ else if (freqvco <= 2970000000UL)
+ pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_3000MHZ);
+ else {
+ DRM_ERROR("PHY serializer clock out of range\n");
+ goto err;
+ }
+
+ /*
+ * Configure and power up the PHY PLL
+ */
+ hdmi->event_received = false;
+ DRM_DEBUG_DRIVER("pllctrl = 0x%x\n", pllctrl);
+ hdmi_write(hdmi, pllctrl, HDMI_SRZ_PLL_CFG);
+
+ /* wait PLL interrupt */
+ wait_event_interruptible_timeout(hdmi->wait_event,
+ hdmi->event_received == true,
+ msecs_to_jiffies
+ (HDMI_TIMEOUT_PLL_LOCK));
+
+ if ((hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK) == 0) {
+ DRM_ERROR("hdmi phy pll not locked\n");
+ goto err;
+ }
+
+ DRM_DEBUG_DRIVER("got PHY PLL Lock\n");
+
+ /*
+ * To configure the source termination and pre-emphasis appropriately
+ * for different high speed TMDS clock frequencies a phy configuration
+ * table must be provided, tailored to the SoC and board combination.
+ */
+ for (i = 0; i < NB_HDMI_PHY_CONFIG; i++) {
+ if ((hdmiphy_config[i].min_tmds_freq <= tmdsck) &&
+ (hdmiphy_config[i].max_tmds_freq >= tmdsck)) {
+ val = hdmiphy_config[i].config[0];
+ hdmi_write(hdmi, val, HDMI_SRZ_TAP_1);
+ val = hdmiphy_config[i].config[1];
+ hdmi_write(hdmi, val, HDMI_SRZ_TAP_2);
+ val = hdmiphy_config[i].config[2];
+ hdmi_write(hdmi, val, HDMI_SRZ_TAP_3);
+ val = hdmiphy_config[i].config[3];
+ val |= HDMI_SRZ_CTRL_EXTERNAL_DATA_EN;
+ val &= ~HDMI_SRZ_CTRL_POWER_DOWN;
+ hdmi_write(hdmi, val, HDMI_SRZ_CTRL);
+
+ DRM_DEBUG_DRIVER("serializer cfg 0x%x 0x%x 0x%x 0x%x\n",
+ hdmiphy_config[i].config[0],
+ hdmiphy_config[i].config[1],
+ hdmiphy_config[i].config[2],
+ hdmiphy_config[i].config[3]);
+ return true;
+ }
+ }
+
+ /*
+ * Default, power up the serializer with no pre-emphasis or source
+ * termination.
+ */
+ hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_1);
+ hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_2);
+ hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_3);
+ hdmi_write(hdmi, HDMI_SRZ_CTRL_EXTERNAL_DATA_EN, HDMI_SRZ_CTRL);
+
+ return true;
+
+err:
+ disable_pll_rejection(hdmi);
+
+ return false;
+}
+
+/**
+ * Stop hdmi phy macro cell tx3g0c55
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ */
+static void sti_hdmi_tx3g0c55phy_stop(struct sti_hdmi *hdmi)
+{
+ DRM_DEBUG_DRIVER("\n");
+
+ hdmi->event_received = false;
+
+ hdmi_write(hdmi, HDMI_SRZ_CTRL_POWER_DOWN, HDMI_SRZ_CTRL);
+ hdmi_write(hdmi, HDMI_SRZ_PLL_CFG_POWER_DOWN, HDMI_SRZ_PLL_CFG);
+
+ /* wait PLL interrupt */
+ wait_event_interruptible_timeout(hdmi->wait_event,
+ hdmi->event_received == true,
+ msecs_to_jiffies
+ (HDMI_TIMEOUT_PLL_LOCK));
+
+ if (hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK)
+ DRM_ERROR("hdmi phy pll not well disabled\n");
+
+ disable_pll_rejection(hdmi);
+}
+
+struct hdmi_phy_ops tx3g0c55phy_ops = {
+ .start = sti_hdmi_tx3g0c55phy_start,
+ .stop = sti_hdmi_tx3g0c55phy_stop,
+};
diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h
new file mode 100644
index 0000000..068237b
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_HDMI_TX3G0C55PHY_H_
+#define _STI_HDMI_TX3G0C55PHY_H_
+
+#include "sti_hdmi.h"
+
+extern struct hdmi_phy_ops tx3g0c55phy_ops;
+
+#endif
diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c b/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c
new file mode 100644
index 0000000..8e0ceb0
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c
@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include "sti_hdmi_tx3g4c28phy.h"
+
+#define HDMI_SRZ_CFG 0x504
+#define HDMI_SRZ_PLL_CFG 0x510
+#define HDMI_SRZ_ICNTL 0x518
+#define HDMI_SRZ_CALCODE_EXT 0x520
+
+#define HDMI_SRZ_CFG_EN BIT(0)
+#define HDMI_SRZ_CFG_DISABLE_BYPASS_SINK_CURRENT BIT(1)
+#define HDMI_SRZ_CFG_EXTERNAL_DATA BIT(16)
+#define HDMI_SRZ_CFG_RBIAS_EXT BIT(17)
+#define HDMI_SRZ_CFG_EN_SINK_TERM_DETECTION BIT(18)
+#define HDMI_SRZ_CFG_EN_BIASRES_DETECTION BIT(19)
+#define HDMI_SRZ_CFG_EN_SRC_TERMINATION BIT(24)
+
+#define HDMI_SRZ_CFG_INTERNAL_MASK (HDMI_SRZ_CFG_EN | \
+ HDMI_SRZ_CFG_DISABLE_BYPASS_SINK_CURRENT | \
+ HDMI_SRZ_CFG_EXTERNAL_DATA | \
+ HDMI_SRZ_CFG_RBIAS_EXT | \
+ HDMI_SRZ_CFG_EN_SINK_TERM_DETECTION | \
+ HDMI_SRZ_CFG_EN_BIASRES_DETECTION | \
+ HDMI_SRZ_CFG_EN_SRC_TERMINATION)
+
+#define PLL_CFG_EN BIT(0)
+#define PLL_CFG_NDIV_SHIFT (8)
+#define PLL_CFG_IDF_SHIFT (16)
+#define PLL_CFG_ODF_SHIFT (24)
+
+#define ODF_DIV_1 (0)
+#define ODF_DIV_2 (1)
+#define ODF_DIV_4 (2)
+#define ODF_DIV_8 (3)
+
+#define HDMI_TIMEOUT_PLL_LOCK 50 /*milliseconds */
+
+struct plldividers_s {
+ uint32_t min;
+ uint32_t max;
+ uint32_t idf;
+ uint32_t odf;
+};
+
+/*
+ * Functional specification recommended values
+ */
+#define NB_PLL_MODE 5
+static struct plldividers_s plldividers[NB_PLL_MODE] = {
+ {0, 20000000, 1, ODF_DIV_8},
+ {20000000, 42500000, 2, ODF_DIV_8},
+ {42500000, 85000000, 4, ODF_DIV_4},
+ {85000000, 170000000, 8, ODF_DIV_2},
+ {170000000, 340000000, 16, ODF_DIV_1}
+};
+
+#define NB_HDMI_PHY_CONFIG 2
+static struct hdmi_phy_config hdmiphy_config[NB_HDMI_PHY_CONFIG] = {
+ {0, 250000000, {0x0, 0x0, 0x0, 0x0} },
+ {250000000, 300000000, {0x1110, 0x0, 0x0, 0x0} },
+};
+
+/**
+ * Start hdmi phy macro cell tx3g4c28
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ *
+ * Return false if an error occur
+ */
+static bool sti_hdmi_tx3g4c28phy_start(struct sti_hdmi *hdmi)
+{
+ u32 ckpxpll = hdmi->mode.clock * 1000;
+ u32 val, tmdsck, idf, odf, pllctrl = 0;
+ bool foundplldivides = false;
+ int i;
+
+ DRM_DEBUG_DRIVER("ckpxpll = %dHz\n", ckpxpll);
+
+ for (i = 0; i < NB_PLL_MODE; i++) {
+ if (ckpxpll >= plldividers[i].min &&
+ ckpxpll < plldividers[i].max) {
+ idf = plldividers[i].idf;
+ odf = plldividers[i].odf;
+ foundplldivides = true;
+ break;
+ }
+ }
+
+ if (!foundplldivides) {
+ DRM_ERROR("input TMDS clock speed (%d) not supported\n",
+ ckpxpll);
+ goto err;
+ }
+
+ /* Assuming no pixel repetition and 24bits color */
+ tmdsck = ckpxpll;
+ pllctrl |= 40 << PLL_CFG_NDIV_SHIFT;
+
+ if (tmdsck > 340000000) {
+ DRM_ERROR("output TMDS clock (%d) out of range\n", tmdsck);
+ goto err;
+ }
+
+ pllctrl |= idf << PLL_CFG_IDF_SHIFT;
+ pllctrl |= odf << PLL_CFG_ODF_SHIFT;
+
+ /*
+ * Configure and power up the PHY PLL
+ */
+ hdmi->event_received = false;
+ DRM_DEBUG_DRIVER("pllctrl = 0x%x\n", pllctrl);
+ hdmi_write(hdmi, (pllctrl | PLL_CFG_EN), HDMI_SRZ_PLL_CFG);
+
+ /* wait PLL interrupt */
+ wait_event_interruptible_timeout(hdmi->wait_event,
+ hdmi->event_received == true,
+ msecs_to_jiffies
+ (HDMI_TIMEOUT_PLL_LOCK));
+
+ if ((hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK) == 0) {
+ DRM_ERROR("hdmi phy pll not locked\n");
+ goto err;
+ }
+
+ DRM_DEBUG_DRIVER("got PHY PLL Lock\n");
+
+ val = (HDMI_SRZ_CFG_EN |
+ HDMI_SRZ_CFG_EXTERNAL_DATA |
+ HDMI_SRZ_CFG_EN_BIASRES_DETECTION |
+ HDMI_SRZ_CFG_EN_SINK_TERM_DETECTION);
+
+ if (tmdsck > 165000000)
+ val |= HDMI_SRZ_CFG_EN_SRC_TERMINATION;
+
+ /*
+ * To configure the source termination and pre-emphasis appropriately
+ * for different high speed TMDS clock frequencies a phy configuration
+ * table must be provided, tailored to the SoC and board combination.
+ */
+ for (i = 0; i < NB_HDMI_PHY_CONFIG; i++) {
+ if ((hdmiphy_config[i].min_tmds_freq <= tmdsck) &&
+ (hdmiphy_config[i].max_tmds_freq >= tmdsck)) {
+ val |= (hdmiphy_config[i].config[0]
+ & ~HDMI_SRZ_CFG_INTERNAL_MASK);
+ hdmi_write(hdmi, val, HDMI_SRZ_CFG);
+
+ val = hdmiphy_config[i].config[1];
+ hdmi_write(hdmi, val, HDMI_SRZ_ICNTL);
+
+ val = hdmiphy_config[i].config[2];
+ hdmi_write(hdmi, val, HDMI_SRZ_CALCODE_EXT);
+
+ DRM_DEBUG_DRIVER("serializer cfg 0x%x 0x%x 0x%x\n",
+ hdmiphy_config[i].config[0],
+ hdmiphy_config[i].config[1],
+ hdmiphy_config[i].config[2]);
+ return true;
+ }
+ }
+
+ /*
+ * Default, power up the serializer with no pre-emphasis or
+ * output swing correction
+ */
+ hdmi_write(hdmi, val, HDMI_SRZ_CFG);
+ hdmi_write(hdmi, 0x0, HDMI_SRZ_ICNTL);
+ hdmi_write(hdmi, 0x0, HDMI_SRZ_CALCODE_EXT);
+
+ return true;
+
+err:
+ return false;
+}
+
+/**
+ * Stop hdmi phy macro cell tx3g4c28
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ */
+static void sti_hdmi_tx3g4c28phy_stop(struct sti_hdmi *hdmi)
+{
+ int val = 0;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ hdmi->event_received = false;
+
+ val = HDMI_SRZ_CFG_EN_SINK_TERM_DETECTION;
+ val |= HDMI_SRZ_CFG_EN_BIASRES_DETECTION;
+
+ hdmi_write(hdmi, val, HDMI_SRZ_CFG);
+ hdmi_write(hdmi, 0, HDMI_SRZ_PLL_CFG);
+
+ /* wait PLL interrupt */
+ wait_event_interruptible_timeout(hdmi->wait_event,
+ hdmi->event_received == true,
+ msecs_to_jiffies
+ (HDMI_TIMEOUT_PLL_LOCK));
+
+ if (hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK)
+ DRM_ERROR("hdmi phy pll not well disabled\n");
+}
+
+struct hdmi_phy_ops tx3g4c28phy_ops = {
+ .start = sti_hdmi_tx3g4c28phy_start,
+ .stop = sti_hdmi_tx3g4c28phy_stop,
+};
diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h b/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h
new file mode 100644
index 0000000..f99a7ff
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_HDMI_TX3G4C28PHY_H_
+#define _STI_HDMI_TX3G4C28PHY_H_
+
+#include "sti_hdmi.h"
+
+extern struct hdmi_phy_ops tx3g4c28phy_ops;
+
+#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v8 05/11] drm: sti: add HDA driver
2014-07-30 17:41 [PATCH v8 00/11] Add DRM for stih4xx platforms Benjamin Gaignard
` (3 preceding siblings ...)
2014-07-30 17:42 ` [PATCH v8 04/11] drm: sti: add HDMI driver Benjamin Gaignard
@ 2014-07-30 17:42 ` Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 06/11] drm: sti: add TVOut driver Benjamin Gaignard
` (5 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-30 17:42 UTC (permalink / raw)
To: dri-devel, linaro-mm-sig, linux-kernel, airlied; +Cc: Benjamin Gaignard
Add driver to support analog TV ouput.
HDA driver is mapped on drm_bridge and drm_connector structures.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
---
drivers/gpu/drm/sti/Makefile | 3 +-
drivers/gpu/drm/sti/sti_hda.c | 794 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 796 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/sti/sti_hda.c
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
index 12e1a07..4cf0c55 100644
--- a/drivers/gpu/drm/sti/Makefile
+++ b/drivers/gpu/drm/sti/Makefile
@@ -5,4 +5,5 @@ stihdmi-y := sti_hdmi.o \
obj-$(CONFIG_DRM_STI) = \
sti_vtg.o \
sti_vtac.o \
- stihdmi.o
\ No newline at end of file
+ stihdmi.o \
+ sti_hda.o
\ No newline at end of file
diff --git a/drivers/gpu/drm/sti/sti_hda.c b/drivers/gpu/drm/sti/sti_hda.c
new file mode 100644
index 0000000..72d957f
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hda.c
@@ -0,0 +1,794 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Fabien Dessenne <fabien.dessenne@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+
+/* HDformatter registers */
+#define HDA_ANA_CFG 0x0000
+#define HDA_ANA_SCALE_CTRL_Y 0x0004
+#define HDA_ANA_SCALE_CTRL_CB 0x0008
+#define HDA_ANA_SCALE_CTRL_CR 0x000C
+#define HDA_ANA_ANC_CTRL 0x0010
+#define HDA_ANA_SRC_Y_CFG 0x0014
+#define HDA_COEFF_Y_PH1_TAP123 0x0018
+#define HDA_COEFF_Y_PH1_TAP456 0x001C
+#define HDA_COEFF_Y_PH2_TAP123 0x0020
+#define HDA_COEFF_Y_PH2_TAP456 0x0024
+#define HDA_COEFF_Y_PH3_TAP123 0x0028
+#define HDA_COEFF_Y_PH3_TAP456 0x002C
+#define HDA_COEFF_Y_PH4_TAP123 0x0030
+#define HDA_COEFF_Y_PH4_TAP456 0x0034
+#define HDA_ANA_SRC_C_CFG 0x0040
+#define HDA_COEFF_C_PH1_TAP123 0x0044
+#define HDA_COEFF_C_PH1_TAP456 0x0048
+#define HDA_COEFF_C_PH2_TAP123 0x004C
+#define HDA_COEFF_C_PH2_TAP456 0x0050
+#define HDA_COEFF_C_PH3_TAP123 0x0054
+#define HDA_COEFF_C_PH3_TAP456 0x0058
+#define HDA_COEFF_C_PH4_TAP123 0x005C
+#define HDA_COEFF_C_PH4_TAP456 0x0060
+#define HDA_SYNC_AWGI 0x0300
+
+/* HDA_ANA_CFG */
+#define CFG_AWG_ASYNC_EN BIT(0)
+#define CFG_AWG_ASYNC_HSYNC_MTD BIT(1)
+#define CFG_AWG_ASYNC_VSYNC_MTD BIT(2)
+#define CFG_AWG_SYNC_DEL BIT(3)
+#define CFG_AWG_FLTR_MODE_SHIFT 4
+#define CFG_AWG_FLTR_MODE_MASK (0xF << CFG_AWG_FLTR_MODE_SHIFT)
+#define CFG_AWG_FLTR_MODE_SD (0 << CFG_AWG_FLTR_MODE_SHIFT)
+#define CFG_AWG_FLTR_MODE_ED (1 << CFG_AWG_FLTR_MODE_SHIFT)
+#define CFG_AWG_FLTR_MODE_HD (2 << CFG_AWG_FLTR_MODE_SHIFT)
+#define CFG_SYNC_ON_PBPR_MASK BIT(8)
+#define CFG_PREFILTER_EN_MASK BIT(9)
+#define CFG_PBPR_SYNC_OFF_SHIFT 16
+#define CFG_PBPR_SYNC_OFF_MASK (0x7FF << CFG_PBPR_SYNC_OFF_SHIFT)
+#define CFG_PBPR_SYNC_OFF_VAL 0x117 /* Voltage dependent. stiH416 */
+
+/* Default scaling values */
+#define SCALE_CTRL_Y_DFLT 0x00C50256
+#define SCALE_CTRL_CB_DFLT 0x00DB0249
+#define SCALE_CTRL_CR_DFLT 0x00DB0249
+
+/* Video DACs control */
+#define VIDEO_DACS_CONTROL_MASK 0x0FFF
+#define VIDEO_DACS_CONTROL_SYSCFG2535 0x085C /* for stih416 */
+#define DAC_CFG_HD_OFF_SHIFT 5
+#define DAC_CFG_HD_OFF_MASK (0x7 << DAC_CFG_HD_OFF_SHIFT)
+#define VIDEO_DACS_CONTROL_SYSCFG5072 0x0120 /* for stih407 */
+#define DAC_CFG_HD_HZUVW_OFF_MASK BIT(1)
+
+
+/* Upsampler values for the alternative 2X Filter */
+#define SAMPLER_COEF_NB 8
+#define HDA_ANA_SRC_Y_CFG_ALT_2X 0x01130000
+static u32 coef_y_alt_2x[] = {
+ 0x00FE83FB, 0x1F900401, 0x00000000, 0x00000000,
+ 0x00F408F9, 0x055F7C25, 0x00000000, 0x00000000
+};
+
+#define HDA_ANA_SRC_C_CFG_ALT_2X 0x01750004
+static u32 coef_c_alt_2x[] = {
+ 0x001305F7, 0x05274BD0, 0x00000000, 0x00000000,
+ 0x0004907C, 0x09C80B9D, 0x00000000, 0x00000000
+};
+
+/* Upsampler values for the 4X Filter */
+#define HDA_ANA_SRC_Y_CFG_4X 0x01ED0005
+#define HDA_ANA_SRC_C_CFG_4X 0x01ED0004
+static u32 coef_yc_4x[] = {
+ 0x00FC827F, 0x008FE20B, 0x00F684FC, 0x050F7C24,
+ 0x00F4857C, 0x0A1F402E, 0x00FA027F, 0x0E076E1D
+};
+
+/* AWG instructions for some video modes */
+#define AWG_MAX_INST 64
+
+/* 720p@50 */
+static u32 AWGi_720p_50[] = {
+ 0x00000971, 0x00000C26, 0x0000013B, 0x00000CDA,
+ 0x00000104, 0x00000E7E, 0x00000E7F, 0x0000013B,
+ 0x00000D8E, 0x00000104, 0x00001804, 0x00000971,
+ 0x00000C26, 0x0000003B, 0x00000FB4, 0x00000FB5,
+ 0x00000104, 0x00001AE8
+};
+
+#define NN_720p_50 ARRAY_SIZE(AWGi_720p_50)
+
+/* 720p@60 */
+static u32 AWGi_720p_60[] = {
+ 0x00000971, 0x00000C26, 0x0000013B, 0x00000CDA,
+ 0x00000104, 0x00000E7E, 0x00000E7F, 0x0000013B,
+ 0x00000C44, 0x00000104, 0x00001804, 0x00000971,
+ 0x00000C26, 0x0000003B, 0x00000F0F, 0x00000F10,
+ 0x00000104, 0x00001AE8
+};
+
+#define NN_720p_60 ARRAY_SIZE(AWGi_720p_60)
+
+/* 1080p@30 */
+static u32 AWGi_1080p_30[] = {
+ 0x00000971, 0x00000C2A, 0x0000013B, 0x00000C56,
+ 0x00000104, 0x00000FDC, 0x00000FDD, 0x0000013B,
+ 0x00000C2A, 0x00000104, 0x00001804, 0x00000971,
+ 0x00000C2A, 0x0000003B, 0x00000EBE, 0x00000EBF,
+ 0x00000EBF, 0x00000104, 0x00001A2F, 0x00001C4B,
+ 0x00001C52
+};
+
+#define NN_1080p_30 ARRAY_SIZE(AWGi_1080p_30)
+
+/* 1080p@25 */
+static u32 AWGi_1080p_25[] = {
+ 0x00000971, 0x00000C2A, 0x0000013B, 0x00000C56,
+ 0x00000104, 0x00000FDC, 0x00000FDD, 0x0000013B,
+ 0x00000DE2, 0x00000104, 0x00001804, 0x00000971,
+ 0x00000C2A, 0x0000003B, 0x00000F51, 0x00000F51,
+ 0x00000F52, 0x00000104, 0x00001A2F, 0x00001C4B,
+ 0x00001C52
+};
+
+#define NN_1080p_25 ARRAY_SIZE(AWGi_1080p_25)
+
+/* 1080p@24 */
+static u32 AWGi_1080p_24[] = {
+ 0x00000971, 0x00000C2A, 0x0000013B, 0x00000C56,
+ 0x00000104, 0x00000FDC, 0x00000FDD, 0x0000013B,
+ 0x00000E50, 0x00000104, 0x00001804, 0x00000971,
+ 0x00000C2A, 0x0000003B, 0x00000F76, 0x00000F76,
+ 0x00000F76, 0x00000104, 0x00001A2F, 0x00001C4B,
+ 0x00001C52
+};
+
+#define NN_1080p_24 ARRAY_SIZE(AWGi_1080p_24)
+
+/* 720x480p@60 */
+static u32 AWGi_720x480p_60[] = {
+ 0x00000904, 0x00000F18, 0x0000013B, 0x00001805,
+ 0x00000904, 0x00000C3D, 0x0000003B, 0x00001A06
+};
+
+#define NN_720x480p_60 ARRAY_SIZE(AWGi_720x480p_60)
+
+/* Video mode category */
+enum sti_hda_vid_cat {
+ VID_SD,
+ VID_ED,
+ VID_HD_74M,
+ VID_HD_148M
+};
+
+struct sti_hda_video_config {
+ struct drm_display_mode mode;
+ u32 *awg_instr;
+ int nb_instr;
+ enum sti_hda_vid_cat vid_cat;
+};
+
+/* HD analog supported modes
+ * Interlaced modes may be added when supported by the whole display chain
+ */
+static const struct sti_hda_video_config hda_supported_modes[] = {
+ /* 1080p30 74.250Mhz */
+ {{DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2008,
+ 2052, 2200, 0, 1080, 1084, 1089, 1125, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC)},
+ AWGi_1080p_30, NN_1080p_30, VID_HD_74M},
+ /* 1080p30 74.176Mhz */
+ {{DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74176, 1920, 2008,
+ 2052, 2200, 0, 1080, 1084, 1089, 1125, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC)},
+ AWGi_1080p_30, NN_1080p_30, VID_HD_74M},
+ /* 1080p24 74.250Mhz */
+ {{DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2558,
+ 2602, 2750, 0, 1080, 1084, 1089, 1125, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC)},
+ AWGi_1080p_24, NN_1080p_24, VID_HD_74M},
+ /* 1080p24 74.176Mhz */
+ {{DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74176, 1920, 2558,
+ 2602, 2750, 0, 1080, 1084, 1089, 1125, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC)},
+ AWGi_1080p_24, NN_1080p_24, VID_HD_74M},
+ /* 1080p25 74.250Mhz */
+ {{DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2448,
+ 2492, 2640, 0, 1080, 1084, 1089, 1125, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC)},
+ AWGi_1080p_25, NN_1080p_25, VID_HD_74M},
+ /* 720p60 74.250Mhz */
+ {{DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1390,
+ 1430, 1650, 0, 720, 725, 730, 750, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC)},
+ AWGi_720p_60, NN_720p_60, VID_HD_74M},
+ /* 720p60 74.176Mhz */
+ {{DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74176, 1280, 1390,
+ 1430, 1650, 0, 720, 725, 730, 750, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC)},
+ AWGi_720p_60, NN_720p_60, VID_HD_74M},
+ /* 720p50 74.250Mhz */
+ {{DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1720,
+ 1760, 1980, 0, 720, 725, 730, 750, 0,
+ DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC)},
+ AWGi_720p_50, NN_720p_50, VID_HD_74M},
+ /* 720x480p60 27.027Mhz */
+ {{DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 27027, 720, 736,
+ 798, 858, 0, 480, 489, 495, 525, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC)},
+ AWGi_720x480p_60, NN_720x480p_60, VID_ED},
+ /* 720x480p60 27.000Mhz */
+ {{DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 27000, 720, 736,
+ 798, 858, 0, 480, 489, 495, 525, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC)},
+ AWGi_720x480p_60, NN_720x480p_60, VID_ED}
+};
+
+/**
+ * STI hd analog structure
+ *
+ * @dev: driver device
+ * @drm_dev: pointer to drm device
+ * @mode: current display mode selected
+ * @regs: HD analog register
+ * @video_dacs_ctrl: video DACS control register
+ * @enabled: true if HD analog is enabled else false
+ */
+struct sti_hda {
+ struct device dev;
+ struct drm_device *drm_dev;
+ struct drm_display_mode mode;
+ void __iomem *regs;
+ void __iomem *video_dacs_ctrl;
+ struct clk *clk_pix;
+ struct clk *clk_hddac;
+ bool enabled;
+};
+
+struct sti_hda_connector {
+ struct drm_connector drm_connector;
+ struct drm_encoder *encoder;
+ struct sti_hda *hda;
+};
+
+#define to_sti_hda_connector(x) \
+ container_of(x, struct sti_hda_connector, drm_connector)
+
+static u32 hda_read(struct sti_hda *hda, int offset)
+{
+ return readl(hda->regs + offset);
+}
+
+static void hda_write(struct sti_hda *hda, u32 val, int offset)
+{
+ writel(val, hda->regs + offset);
+}
+
+/**
+ * Search for a video mode in the supported modes table
+ *
+ * @mode: mode being searched
+ * @idx: index of the found mode
+ *
+ * Return true if mode is found
+ */
+static bool hda_get_mode_idx(struct drm_display_mode mode, int *idx)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(hda_supported_modes); i++)
+ if (drm_mode_equal(&hda_supported_modes[i].mode, &mode)) {
+ *idx = i;
+ return true;
+ }
+ return false;
+}
+
+/**
+ * Enable the HD DACS
+ *
+ * @hda: pointer to HD analog structure
+ * @enable: true if HD DACS need to be enabled, else false
+ */
+static void hda_enable_hd_dacs(struct sti_hda *hda, bool enable)
+{
+ u32 mask;
+
+ if (hda->video_dacs_ctrl) {
+ u32 val;
+
+ switch ((u32)hda->video_dacs_ctrl & VIDEO_DACS_CONTROL_MASK) {
+ case VIDEO_DACS_CONTROL_SYSCFG2535:
+ mask = DAC_CFG_HD_OFF_MASK;
+ break;
+ case VIDEO_DACS_CONTROL_SYSCFG5072:
+ mask = DAC_CFG_HD_HZUVW_OFF_MASK;
+ break;
+ default:
+ DRM_INFO("Video DACS control register not supported!");
+ return;
+ }
+
+ val = readl(hda->video_dacs_ctrl);
+ if (enable)
+ val &= ~mask;
+ else
+ val |= mask;
+
+ writel(val, hda->video_dacs_ctrl);
+ }
+}
+
+/**
+ * Configure AWG, writing instructions
+ *
+ * @hda: pointer to HD analog structure
+ * @awg_instr: pointer to AWG instructions table
+ * @nb: nb of AWG instructions
+ */
+static void sti_hda_configure_awg(struct sti_hda *hda, u32 *awg_instr, int nb)
+{
+ unsigned int i;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ for (i = 0; i < nb; i++)
+ hda_write(hda, awg_instr[i], HDA_SYNC_AWGI + i * 4);
+ for (i = nb; i < AWG_MAX_INST; i++)
+ hda_write(hda, 0, HDA_SYNC_AWGI + i * 4);
+}
+
+static void sti_hda_disable(struct drm_bridge *bridge)
+{
+ struct sti_hda *hda = bridge->driver_private;
+ u32 val;
+
+ if (!hda->enabled)
+ return;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Disable HD DAC and AWG */
+ val = hda_read(hda, HDA_ANA_CFG);
+ val &= ~CFG_AWG_ASYNC_EN;
+ hda_write(hda, val, HDA_ANA_CFG);
+ hda_write(hda, 0, HDA_ANA_ANC_CTRL);
+
+ hda_enable_hd_dacs(hda, false);
+
+ /* Disable/unprepare hda clock */
+ clk_disable_unprepare(hda->clk_hddac);
+ clk_disable_unprepare(hda->clk_pix);
+
+ hda->enabled = false;
+}
+
+static void sti_hda_pre_enable(struct drm_bridge *bridge)
+{
+ struct sti_hda *hda = bridge->driver_private;
+ u32 val, i, mode_idx;
+ u32 src_filter_y, src_filter_c;
+ u32 *coef_y, *coef_c;
+ u32 filter_mode;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ if (hda->enabled)
+ return;
+
+ /* Prepare/enable clocks */
+ if (clk_prepare_enable(hda->clk_pix))
+ DRM_ERROR("Failed to prepare/enable hda_pix clk\n");
+ if (clk_prepare_enable(hda->clk_hddac))
+ DRM_ERROR("Failed to prepare/enable hda_hddac clk\n");
+
+ if (!hda_get_mode_idx(hda->mode, &mode_idx)) {
+ DRM_ERROR("Undefined mode\n");
+ return;
+ }
+
+ switch (hda_supported_modes[mode_idx].vid_cat) {
+ case VID_HD_148M:
+ DRM_ERROR("Beyond HD analog capabilities\n");
+ return;
+ case VID_HD_74M:
+ /* HD use alternate 2x filter */
+ filter_mode = CFG_AWG_FLTR_MODE_HD;
+ src_filter_y = HDA_ANA_SRC_Y_CFG_ALT_2X;
+ src_filter_c = HDA_ANA_SRC_C_CFG_ALT_2X;
+ coef_y = coef_y_alt_2x;
+ coef_c = coef_c_alt_2x;
+ break;
+ case VID_ED:
+ /* ED uses 4x filter */
+ filter_mode = CFG_AWG_FLTR_MODE_ED;
+ src_filter_y = HDA_ANA_SRC_Y_CFG_4X;
+ src_filter_c = HDA_ANA_SRC_C_CFG_4X;
+ coef_y = coef_yc_4x;
+ coef_c = coef_yc_4x;
+ break;
+ case VID_SD:
+ DRM_ERROR("Not supported\n");
+ return;
+ default:
+ DRM_ERROR("Undefined resolution\n");
+ return;
+ }
+ DRM_DEBUG_DRIVER("Using HDA mode #%d\n", mode_idx);
+
+ /* Enable HD Video DACs */
+ hda_enable_hd_dacs(hda, true);
+
+ /* Configure scaler */
+ hda_write(hda, SCALE_CTRL_Y_DFLT, HDA_ANA_SCALE_CTRL_Y);
+ hda_write(hda, SCALE_CTRL_CB_DFLT, HDA_ANA_SCALE_CTRL_CB);
+ hda_write(hda, SCALE_CTRL_CR_DFLT, HDA_ANA_SCALE_CTRL_CR);
+
+ /* Configure sampler */
+ hda_write(hda , src_filter_y, HDA_ANA_SRC_Y_CFG);
+ hda_write(hda, src_filter_c, HDA_ANA_SRC_C_CFG);
+ for (i = 0; i < SAMPLER_COEF_NB; i++) {
+ hda_write(hda, coef_y[i], HDA_COEFF_Y_PH1_TAP123 + i * 4);
+ hda_write(hda, coef_c[i], HDA_COEFF_C_PH1_TAP123 + i * 4);
+ }
+
+ /* Configure main HDFormatter */
+ val = 0;
+ val |= (hda->mode.flags & DRM_MODE_FLAG_INTERLACE) ?
+ 0 : CFG_AWG_ASYNC_VSYNC_MTD;
+ val |= (CFG_PBPR_SYNC_OFF_VAL << CFG_PBPR_SYNC_OFF_SHIFT);
+ val |= filter_mode;
+ hda_write(hda, val, HDA_ANA_CFG);
+
+ /* Configure AWG */
+ sti_hda_configure_awg(hda, hda_supported_modes[mode_idx].awg_instr,
+ hda_supported_modes[mode_idx].nb_instr);
+
+ /* Enable AWG */
+ val = hda_read(hda, HDA_ANA_CFG);
+ val |= CFG_AWG_ASYNC_EN;
+ hda_write(hda, val, HDA_ANA_CFG);
+
+ hda->enabled = true;
+}
+
+static void sti_hda_set_mode(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct sti_hda *hda = bridge->driver_private;
+ u32 mode_idx;
+ int hddac_rate;
+ int ret;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ memcpy(&hda->mode, mode, sizeof(struct drm_display_mode));
+
+ if (!hda_get_mode_idx(hda->mode, &mode_idx)) {
+ DRM_ERROR("Undefined mode\n");
+ return;
+ }
+
+ switch (hda_supported_modes[mode_idx].vid_cat) {
+ case VID_HD_74M:
+ /* HD use alternate 2x filter */
+ hddac_rate = mode->clock * 1000 * 2;
+ break;
+ case VID_ED:
+ /* ED uses 4x filter */
+ hddac_rate = mode->clock * 1000 * 4;
+ break;
+ default:
+ DRM_ERROR("Undefined mode\n");
+ return;
+ }
+
+ /* HD DAC = 148.5Mhz or 108 Mhz */
+ ret = clk_set_rate(hda->clk_hddac, hddac_rate);
+ if (ret < 0)
+ DRM_ERROR("Cannot set rate (%dHz) for hda_hddac clk\n",
+ hddac_rate);
+
+ /* HDformatter clock = compositor clock */
+ ret = clk_set_rate(hda->clk_pix, mode->clock * 1000);
+ if (ret < 0)
+ DRM_ERROR("Cannot set rate (%dHz) for hda_pix clk\n",
+ mode->clock * 1000);
+}
+
+static void sti_hda_bridge_nope(struct drm_bridge *bridge)
+{
+ /* do nothing */
+}
+
+static void sti_hda_brigde_destroy(struct drm_bridge *bridge)
+{
+ drm_bridge_cleanup(bridge);
+ kfree(bridge);
+}
+
+static const struct drm_bridge_funcs sti_hda_bridge_funcs = {
+ .pre_enable = sti_hda_pre_enable,
+ .enable = sti_hda_bridge_nope,
+ .disable = sti_hda_disable,
+ .post_disable = sti_hda_bridge_nope,
+ .mode_set = sti_hda_set_mode,
+ .destroy = sti_hda_brigde_destroy,
+};
+
+static int sti_hda_connector_get_modes(struct drm_connector *connector)
+{
+ unsigned int i;
+ int count = 0;
+ struct sti_hda_connector *hda_connector
+ = to_sti_hda_connector(connector);
+ struct sti_hda *hda = hda_connector->hda;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ for (i = 0; i < ARRAY_SIZE(hda_supported_modes); i++) {
+ struct drm_display_mode *mode =
+ drm_mode_duplicate(hda->drm_dev,
+ &hda_supported_modes[i].mode);
+ if (!mode)
+ continue;
+ mode->vrefresh = drm_mode_vrefresh(mode);
+
+ /* the first mode is the preferred mode */
+ if (i == 0)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_probed_add(connector, mode);
+ count++;
+ }
+
+ drm_mode_sort(&connector->modes);
+
+ return count;
+}
+
+#define CLK_TOLERANCE_HZ 50
+
+static int sti_hda_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ int target = mode->clock * 1000;
+ int target_min = target - CLK_TOLERANCE_HZ;
+ int target_max = target + CLK_TOLERANCE_HZ;
+ int result;
+ int idx;
+ struct sti_hda_connector *hda_connector
+ = to_sti_hda_connector(connector);
+ struct sti_hda *hda = hda_connector->hda;
+
+ if (!hda_get_mode_idx(*mode, &idx)) {
+ return MODE_BAD;
+ } else {
+ result = clk_round_rate(hda->clk_pix, target);
+
+ DRM_DEBUG_DRIVER("target rate = %d => available rate = %d\n",
+ target, result);
+
+ if ((result < target_min) || (result > target_max)) {
+ DRM_DEBUG_DRIVER("hda pixclk=%d not supported\n",
+ target);
+ return MODE_BAD;
+ }
+ }
+
+ return MODE_OK;
+}
+
+struct drm_encoder *sti_hda_best_encoder(struct drm_connector *connector)
+{
+ struct sti_hda_connector *hda_connector
+ = to_sti_hda_connector(connector);
+
+ /* Best encoder is the one associated during connector creation */
+ return hda_connector->encoder;
+}
+
+static struct drm_connector_helper_funcs sti_hda_connector_helper_funcs = {
+ .get_modes = sti_hda_connector_get_modes,
+ .mode_valid = sti_hda_connector_mode_valid,
+ .best_encoder = sti_hda_best_encoder,
+};
+
+static enum drm_connector_status
+sti_hda_connector_detect(struct drm_connector *connector, bool force)
+{
+ return connector_status_connected;
+}
+
+static void sti_hda_connector_destroy(struct drm_connector *connector)
+{
+ struct sti_hda_connector *hda_connector
+ = to_sti_hda_connector(connector);
+
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+ kfree(hda_connector);
+}
+
+static struct drm_connector_funcs sti_hda_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = sti_hda_connector_detect,
+ .destroy = sti_hda_connector_destroy,
+};
+
+static struct drm_encoder *sti_hda_find_encoder(struct drm_device *dev)
+{
+ struct drm_encoder *encoder;
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ if (encoder->encoder_type == DRM_MODE_ENCODER_DAC)
+ return encoder;
+ }
+
+ return NULL;
+}
+
+static int sti_hda_bind(struct device *dev, struct device *master, void *data)
+{
+ struct sti_hda *hda = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+ struct drm_encoder *encoder;
+ struct sti_hda_connector *connector;
+ struct drm_connector *drm_connector;
+ struct drm_bridge *bridge;
+ int err;
+
+ /* Set the drm device handle */
+ hda->drm_dev = drm_dev;
+
+ encoder = sti_hda_find_encoder(drm_dev);
+ if (!encoder)
+ return -ENOMEM;
+
+ connector = devm_kzalloc(dev, sizeof(*connector), GFP_KERNEL);
+ if (!connector)
+ return -ENOMEM;
+
+ connector->hda = hda;
+
+ bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL);
+ if (!bridge)
+ return -ENOMEM;
+
+ bridge->driver_private = hda;
+ drm_bridge_init(drm_dev, bridge, &sti_hda_bridge_funcs);
+
+ encoder->bridge = bridge;
+ connector->encoder = encoder;
+
+ drm_connector = (struct drm_connector *)connector;
+
+ drm_connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+ drm_connector_init(drm_dev, drm_connector,
+ &sti_hda_connector_funcs, DRM_MODE_CONNECTOR_Component);
+ drm_connector_helper_add(drm_connector,
+ &sti_hda_connector_helper_funcs);
+
+ err = drm_connector_register(drm_connector);
+ if (err)
+ goto err_connector;
+
+ err = drm_mode_connector_attach_encoder(drm_connector, encoder);
+ if (err) {
+ DRM_ERROR("Failed to attach a connector to a encoder\n");
+ goto err_sysfs;
+ }
+
+ return 0;
+
+err_sysfs:
+ drm_connector_unregister(drm_connector);
+err_connector:
+ drm_bridge_cleanup(bridge);
+ drm_connector_cleanup(drm_connector);
+ return -EINVAL;
+}
+
+static void sti_hda_unbind(struct device *dev,
+ struct device *master, void *data)
+{
+ /* do nothing */
+}
+
+static const struct component_ops sti_hda_ops = {
+ .bind = sti_hda_bind,
+ .unbind = sti_hda_unbind,
+};
+
+static int sti_hda_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sti_hda *hda;
+ struct resource *res;
+
+ DRM_INFO("%s\n", __func__);
+
+ hda = devm_kzalloc(dev, sizeof(*hda), GFP_KERNEL);
+ if (!hda)
+ return -ENOMEM;
+
+ hda->dev = pdev->dev;
+
+ /* Get resources */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hda-reg");
+ if (!res) {
+ DRM_ERROR("Invalid hda resource\n");
+ return -ENOMEM;
+ }
+ hda->regs = devm_ioremap_nocache(dev, res->start, resource_size(res));
+ if (IS_ERR(hda->regs))
+ return PTR_ERR(hda->regs);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "video-dacs-ctrl");
+ if (res) {
+ hda->video_dacs_ctrl = devm_ioremap_nocache(dev, res->start,
+ resource_size(res));
+ if (IS_ERR(hda->video_dacs_ctrl))
+ return PTR_ERR(hda->video_dacs_ctrl);
+ } else {
+ /* If no existing video-dacs-ctrl resource continue the probe */
+ DRM_DEBUG_DRIVER("No video-dacs-ctrl resource\n");
+ hda->video_dacs_ctrl = NULL;
+ }
+
+ /* Get clock resources */
+ hda->clk_pix = devm_clk_get(dev, "pix");
+ if (IS_ERR(hda->clk_pix)) {
+ DRM_ERROR("Cannot get hda_pix clock\n");
+ return PTR_ERR(hda->clk_pix);
+ }
+
+ hda->clk_hddac = devm_clk_get(dev, "hddac");
+ if (IS_ERR(hda->clk_hddac)) {
+ DRM_ERROR("Cannot get hda_hddac clock\n");
+ return PTR_ERR(hda->clk_hddac);
+ }
+
+ platform_set_drvdata(pdev, hda);
+
+ return component_add(&pdev->dev, &sti_hda_ops);
+}
+
+static int sti_hda_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &sti_hda_ops);
+ return 0;
+}
+
+static struct of_device_id hda_of_match[] = {
+ { .compatible = "st,stih416-hda", },
+ { .compatible = "st,stih407-hda", },
+ { /* end node */ }
+};
+MODULE_DEVICE_TABLE(of, hda_of_match);
+
+struct platform_driver sti_hda_driver = {
+ .driver = {
+ .name = "sti-hda",
+ .owner = THIS_MODULE,
+ .of_match_table = hda_of_match,
+ },
+ .probe = sti_hda_probe,
+ .remove = sti_hda_remove,
+};
+
+module_platform_driver(sti_hda_driver);
+
+MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver");
+MODULE_LICENSE("GPL");
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v8 06/11] drm: sti: add TVOut driver
2014-07-30 17:41 [PATCH v8 00/11] Add DRM for stih4xx platforms Benjamin Gaignard
` (4 preceding siblings ...)
2014-07-30 17:42 ` [PATCH v8 05/11] drm: sti: add HDA driver Benjamin Gaignard
@ 2014-07-30 17:42 ` Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 07/11] drm: sti: add GDP layer Benjamin Gaignard
` (4 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-30 17:42 UTC (permalink / raw)
To: dri-devel, linaro-mm-sig, linux-kernel, airlied; +Cc: Benjamin Gaignard
TVout hardware block is responsible to dispatch the data flow coming
from compositor block to any of the output (HDMI or Analog TV).
It control when output are start/stop and configure according the
require flow path.
TVout is the parent of HDMI and HDA drivers and bind them at runtime.
Tvout is mapped on drm_encoder structure.
One encoder is created for each of the sub-devices and link to their
connector/bridge
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
---
drivers/gpu/drm/sti/Makefile | 3 +-
drivers/gpu/drm/sti/sti_tvout.c | 648 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 650 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/sti/sti_tvout.c
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
index 4cf0c55..5f6d96d 100644
--- a/drivers/gpu/drm/sti/Makefile
+++ b/drivers/gpu/drm/sti/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_DRM_STI) = \
sti_vtg.o \
sti_vtac.o \
stihdmi.o \
- sti_hda.o
\ No newline at end of file
+ sti_hda.o \
+ sti_tvout.o
\ No newline at end of file
diff --git a/drivers/gpu/drm/sti/sti_tvout.c b/drivers/gpu/drm/sti/sti_tvout.c
new file mode 100644
index 0000000..b69e26f
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_tvout.c
@@ -0,0 +1,648 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ * Vincent Abriou <vincent.abriou@st.com>
+ * for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+
+/* glue registers */
+#define TVO_CSC_MAIN_M0 0x000
+#define TVO_CSC_MAIN_M1 0x004
+#define TVO_CSC_MAIN_M2 0x008
+#define TVO_CSC_MAIN_M3 0x00c
+#define TVO_CSC_MAIN_M4 0x010
+#define TVO_CSC_MAIN_M5 0x014
+#define TVO_CSC_MAIN_M6 0x018
+#define TVO_CSC_MAIN_M7 0x01c
+#define TVO_MAIN_IN_VID_FORMAT 0x030
+#define TVO_CSC_AUX_M0 0x100
+#define TVO_CSC_AUX_M1 0x104
+#define TVO_CSC_AUX_M2 0x108
+#define TVO_CSC_AUX_M3 0x10c
+#define TVO_CSC_AUX_M4 0x110
+#define TVO_CSC_AUX_M5 0x114
+#define TVO_CSC_AUX_M6 0x118
+#define TVO_CSC_AUX_M7 0x11c
+#define TVO_AUX_IN_VID_FORMAT 0x130
+#define TVO_VIP_HDF 0x400
+#define TVO_HD_SYNC_SEL 0x418
+#define TVO_HD_DAC_CFG_OFF 0x420
+#define TVO_VIP_HDMI 0x500
+#define TVO_HDMI_FORCE_COLOR_0 0x504
+#define TVO_HDMI_FORCE_COLOR_1 0x508
+#define TVO_HDMI_CLIP_VALUE_B_CB 0x50c
+#define TVO_HDMI_CLIP_VALUE_Y_G 0x510
+#define TVO_HDMI_CLIP_VALUE_R_CR 0x514
+#define TVO_HDMI_SYNC_SEL 0x518
+#define TVO_HDMI_DFV_OBS 0x540
+
+#define TVO_IN_FMT_SIGNED BIT(0)
+#define TVO_SYNC_EXT BIT(4)
+
+#define TVO_VIP_REORDER_R_SHIFT 24
+#define TVO_VIP_REORDER_G_SHIFT 20
+#define TVO_VIP_REORDER_B_SHIFT 16
+#define TVO_VIP_REORDER_MASK 0x3
+#define TVO_VIP_REORDER_Y_G_SEL 0
+#define TVO_VIP_REORDER_CB_B_SEL 1
+#define TVO_VIP_REORDER_CR_R_SEL 2
+
+#define TVO_VIP_CLIP_SHIFT 8
+#define TVO_VIP_CLIP_MASK 0x7
+#define TVO_VIP_CLIP_DISABLED 0
+#define TVO_VIP_CLIP_EAV_SAV 1
+#define TVO_VIP_CLIP_LIMITED_RANGE_RGB_Y 2
+#define TVO_VIP_CLIP_LIMITED_RANGE_CB_CR 3
+#define TVO_VIP_CLIP_PROG_RANGE 4
+
+#define TVO_VIP_RND_SHIFT 4
+#define TVO_VIP_RND_MASK 0x3
+#define TVO_VIP_RND_8BIT_ROUNDED 0
+#define TVO_VIP_RND_10BIT_ROUNDED 1
+#define TVO_VIP_RND_12BIT_ROUNDED 2
+
+#define TVO_VIP_SEL_INPUT_MASK 0xf
+#define TVO_VIP_SEL_INPUT_MAIN 0x0
+#define TVO_VIP_SEL_INPUT_AUX 0x8
+#define TVO_VIP_SEL_INPUT_FORCE_COLOR 0xf
+#define TVO_VIP_SEL_INPUT_BYPASS_MASK 0x1
+#define TVO_VIP_SEL_INPUT_BYPASSED 1
+
+#define TVO_SYNC_MAIN_VTG_SET_REF 0x00
+#define TVO_SYNC_MAIN_VTG_SET_1 0x01
+#define TVO_SYNC_MAIN_VTG_SET_2 0x02
+#define TVO_SYNC_MAIN_VTG_SET_3 0x03
+#define TVO_SYNC_MAIN_VTG_SET_4 0x04
+#define TVO_SYNC_MAIN_VTG_SET_5 0x05
+#define TVO_SYNC_MAIN_VTG_SET_6 0x06
+#define TVO_SYNC_AUX_VTG_SET_REF 0x10
+#define TVO_SYNC_AUX_VTG_SET_1 0x11
+#define TVO_SYNC_AUX_VTG_SET_2 0x12
+#define TVO_SYNC_AUX_VTG_SET_3 0x13
+#define TVO_SYNC_AUX_VTG_SET_4 0x14
+#define TVO_SYNC_AUX_VTG_SET_5 0x15
+#define TVO_SYNC_AUX_VTG_SET_6 0x16
+
+#define TVO_SYNC_HD_DCS_SHIFT 8
+
+#define ENCODER_MAIN_CRTC_MASK BIT(0)
+
+/* enum listing the supported output data format */
+enum sti_tvout_video_out_type {
+ STI_TVOUT_VIDEO_OUT_RGB,
+ STI_TVOUT_VIDEO_OUT_YUV,
+};
+
+struct sti_tvout {
+ struct device *dev;
+ struct drm_device *drm_dev;
+ void __iomem *regs;
+ struct reset_control *reset;
+ struct drm_encoder *hdmi;
+ struct drm_encoder *hda;
+};
+
+struct sti_tvout_encoder {
+ struct drm_encoder encoder;
+ struct sti_tvout *tvout;
+};
+
+#define to_sti_tvout_encoder(x) \
+ container_of(x, struct sti_tvout_encoder, encoder)
+
+#define to_sti_tvout(x) to_sti_tvout_encoder(x)->tvout
+
+/* preformatter conversion matrix */
+static const u32 rgb_to_ycbcr_601[8] = {
+ 0xF927082E, 0x04C9FEAB, 0x01D30964, 0xFA95FD3D,
+ 0x0000082E, 0x00002000, 0x00002000, 0x00000000
+};
+
+/* 709 RGB to YCbCr */
+static const u32 rgb_to_ycbcr_709[8] = {
+ 0xF891082F, 0x0367FF40, 0x01280B71, 0xF9B1FE20,
+ 0x0000082F, 0x00002000, 0x00002000, 0x00000000
+};
+
+static u32 tvout_read(struct sti_tvout *tvout, int offset)
+{
+ return readl(tvout->regs + offset);
+}
+
+static void tvout_write(struct sti_tvout *tvout, u32 val, int offset)
+{
+ writel(val, tvout->regs + offset);
+}
+
+/**
+ * Set the clipping mode of a VIP
+ *
+ * @tvout: tvout structure
+ * @cr_r:
+ * @y_g:
+ * @cb_b:
+ */
+static void tvout_vip_set_color_order(struct sti_tvout *tvout,
+ u32 cr_r, u32 y_g, u32 cb_b)
+{
+ u32 val = tvout_read(tvout, TVO_VIP_HDMI);
+
+ val &= ~(TVO_VIP_REORDER_MASK << TVO_VIP_REORDER_R_SHIFT);
+ val &= ~(TVO_VIP_REORDER_MASK << TVO_VIP_REORDER_G_SHIFT);
+ val &= ~(TVO_VIP_REORDER_MASK << TVO_VIP_REORDER_B_SHIFT);
+ val |= cr_r << TVO_VIP_REORDER_R_SHIFT;
+ val |= y_g << TVO_VIP_REORDER_G_SHIFT;
+ val |= cb_b << TVO_VIP_REORDER_B_SHIFT;
+
+ tvout_write(tvout, val, TVO_VIP_HDMI);
+}
+
+/**
+ * Set the clipping mode of a VIP
+ *
+ * @tvout: tvout structure
+ * @range: clipping range
+ */
+static void tvout_vip_set_clip_mode(struct sti_tvout *tvout, u32 range)
+{
+ u32 val = tvout_read(tvout, TVO_VIP_HDMI);
+
+ val &= ~(TVO_VIP_CLIP_MASK << TVO_VIP_CLIP_SHIFT);
+ val |= range << TVO_VIP_CLIP_SHIFT;
+ tvout_write(tvout, val, TVO_VIP_HDMI);
+}
+
+/**
+ * Set the rounded value of a VIP
+ *
+ * @tvout: tvout structure
+ * @rnd: rounded val per component
+ */
+static void tvout_vip_set_rnd(struct sti_tvout *tvout, u32 rnd)
+{
+ u32 val = tvout_read(tvout, TVO_VIP_HDMI);
+
+ val &= ~(TVO_VIP_RND_MASK << TVO_VIP_RND_SHIFT);
+ val |= rnd << TVO_VIP_RND_SHIFT;
+ tvout_write(tvout, val, TVO_VIP_HDMI);
+}
+
+/**
+ * Select the VIP input
+ *
+ * @tvout: tvout structure
+ * @sel_input: selected_input (main/aux + conv)
+ */
+static void tvout_vip_set_sel_input(struct sti_tvout *tvout,
+ bool main_path,
+ bool sel_input_logic_inverted,
+ enum sti_tvout_video_out_type video_out)
+{
+ u32 sel_input;
+ u32 val = tvout_read(tvout, TVO_VIP_HDMI);
+
+ if (main_path)
+ sel_input = TVO_VIP_SEL_INPUT_MAIN;
+ else
+ sel_input = TVO_VIP_SEL_INPUT_AUX;
+
+ switch (video_out) {
+ case STI_TVOUT_VIDEO_OUT_RGB:
+ sel_input |= TVO_VIP_SEL_INPUT_BYPASSED;
+ break;
+ case STI_TVOUT_VIDEO_OUT_YUV:
+ sel_input &= ~TVO_VIP_SEL_INPUT_BYPASSED;
+ break;
+ }
+
+ /* on stih407 chip the sel_input bypass mode logic is inverted */
+ if (sel_input_logic_inverted)
+ sel_input = sel_input ^ TVO_VIP_SEL_INPUT_BYPASS_MASK;
+
+ val &= ~TVO_VIP_SEL_INPUT_MASK;
+ val |= sel_input;
+ tvout_write(tvout, val, TVO_VIP_HDMI);
+}
+
+/**
+ * Select the input video signed or unsigned
+ *
+ * @tvout: tvout structure
+ * @in_vid_signed: used video input format
+ */
+static void tvout_vip_set_in_vid_fmt(struct sti_tvout *tvout, u32 in_vid_fmt)
+{
+ u32 val = tvout_read(tvout, TVO_VIP_HDMI);
+
+ val &= ~TVO_IN_FMT_SIGNED;
+ val |= in_vid_fmt;
+ tvout_write(tvout, val, TVO_MAIN_IN_VID_FORMAT);
+}
+
+/**
+ * Start VIP block for HDMI output
+ *
+ * @tvout: pointer on tvout structure
+ * @main_path: true if main path has to be used in the vip configuration
+ * else aux path is used.
+ */
+static void tvout_hdmi_start(struct sti_tvout *tvout, bool main_path)
+{
+ struct device_node *node = tvout->dev->of_node;
+ bool sel_input_logic_inverted = false;
+
+ dev_dbg(tvout->dev, "%s\n", __func__);
+
+ if (main_path) {
+ DRM_DEBUG_DRIVER("main vip for hdmi\n");
+ /* select the input sync for hdmi = VTG set 1 */
+ tvout_write(tvout, TVO_SYNC_MAIN_VTG_SET_1, TVO_HDMI_SYNC_SEL);
+ } else {
+ DRM_DEBUG_DRIVER("aux vip for hdmi\n");
+ /* select the input sync for hdmi = VTG set 1 */
+ tvout_write(tvout, TVO_SYNC_AUX_VTG_SET_1, TVO_HDMI_SYNC_SEL);
+ }
+
+ /* set color channel order */
+ tvout_vip_set_color_order(tvout,
+ TVO_VIP_REORDER_CR_R_SEL,
+ TVO_VIP_REORDER_Y_G_SEL,
+ TVO_VIP_REORDER_CB_B_SEL);
+
+ /* set clipping mode (Limited range RGB/Y) */
+ tvout_vip_set_clip_mode(tvout, TVO_VIP_CLIP_LIMITED_RANGE_RGB_Y);
+
+ /* set round mode (rounded to 8-bit per component) */
+ tvout_vip_set_rnd(tvout, TVO_VIP_RND_8BIT_ROUNDED);
+
+ if (of_device_is_compatible(node, "st,stih407-tvout")) {
+ /* set input video format */
+ tvout_vip_set_in_vid_fmt(tvout->regs + TVO_MAIN_IN_VID_FORMAT,
+ TVO_IN_FMT_SIGNED);
+ sel_input_logic_inverted = true;
+ }
+
+ /* input selection */
+ tvout_vip_set_sel_input(tvout, main_path,
+ sel_input_logic_inverted, STI_TVOUT_VIDEO_OUT_RGB);
+}
+
+/**
+ * Start HDF VIP and HD DAC
+ *
+ * @tvout: pointer on tvout structure
+ * @main_path: true if main path has to be used in the vip configuration
+ * else aux path is used.
+ */
+static void tvout_hda_start(struct sti_tvout *tvout, bool main_path)
+{
+ struct device_node *node = tvout->dev->of_node;
+ bool sel_input_logic_inverted = false;
+
+ dev_dbg(tvout->dev, "%s\n", __func__);
+
+ if (!main_path) {
+ DRM_ERROR("HD Analog on aux not implemented\n");
+ return;
+ }
+
+ DRM_DEBUG_DRIVER("main vip for HDF\n");
+
+ /* set color channel order */
+ tvout_vip_set_color_order(tvout->regs + TVO_VIP_HDF,
+ TVO_VIP_REORDER_CR_R_SEL,
+ TVO_VIP_REORDER_Y_G_SEL,
+ TVO_VIP_REORDER_CB_B_SEL);
+
+ /* set clipping mode (Limited range RGB/Y) */
+ tvout_vip_set_clip_mode(tvout->regs + TVO_VIP_HDF,
+ TVO_VIP_CLIP_LIMITED_RANGE_CB_CR);
+
+ /* set round mode (rounded to 10-bit per component) */
+ tvout_vip_set_rnd(tvout->regs + TVO_VIP_HDF, TVO_VIP_RND_10BIT_ROUNDED);
+
+ if (of_device_is_compatible(node, "st,stih407-tvout")) {
+ /* set input video format */
+ tvout_vip_set_in_vid_fmt(tvout, TVO_IN_FMT_SIGNED);
+ sel_input_logic_inverted = true;
+ }
+
+ /* Input selection */
+ tvout_vip_set_sel_input(tvout->regs + TVO_VIP_HDF,
+ main_path,
+ sel_input_logic_inverted,
+ STI_TVOUT_VIDEO_OUT_YUV);
+
+ /* select the input sync for HD analog = VTG set 3
+ * and HD DCS = VTG set 2 */
+ tvout_write(tvout,
+ (TVO_SYNC_MAIN_VTG_SET_2 << TVO_SYNC_HD_DCS_SHIFT)
+ | TVO_SYNC_MAIN_VTG_SET_3,
+ TVO_HD_SYNC_SEL);
+
+ /* power up HD DAC */
+ tvout_write(tvout, 0, TVO_HD_DAC_CFG_OFF);
+}
+
+static void sti_tvout_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+}
+
+static bool sti_tvout_encoder_mode_fixup(struct drm_encoder *encoder,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static void sti_tvout_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+}
+
+static void sti_tvout_encoder_prepare(struct drm_encoder *encoder)
+{
+}
+
+static void sti_tvout_encoder_destroy(struct drm_encoder *encoder)
+{
+ struct sti_tvout_encoder *sti_encoder = to_sti_tvout_encoder(encoder);
+
+ drm_encoder_cleanup(encoder);
+ kfree(sti_encoder);
+}
+
+static const struct drm_encoder_funcs sti_tvout_encoder_funcs = {
+ .destroy = sti_tvout_encoder_destroy,
+};
+
+static void sti_hda_encoder_commit(struct drm_encoder *encoder)
+{
+ struct sti_tvout *tvout = to_sti_tvout(encoder);
+
+ tvout_hda_start(tvout, true);
+}
+
+static void sti_hda_encoder_disable(struct drm_encoder *encoder)
+{
+ struct sti_tvout *tvout = to_sti_tvout(encoder);
+
+ /* reset VIP register */
+ tvout_write(tvout, 0x0, TVO_VIP_HDF);
+
+ /* power down HD DAC */
+ tvout_write(tvout, 1, TVO_HD_DAC_CFG_OFF);
+}
+
+static const struct drm_encoder_helper_funcs sti_hda_encoder_helper_funcs = {
+ .dpms = sti_tvout_encoder_dpms,
+ .mode_fixup = sti_tvout_encoder_mode_fixup,
+ .mode_set = sti_tvout_encoder_mode_set,
+ .prepare = sti_tvout_encoder_prepare,
+ .commit = sti_hda_encoder_commit,
+ .disable = sti_hda_encoder_disable,
+};
+
+static struct drm_encoder *sti_tvout_create_hda_encoder(struct drm_device *dev,
+ struct sti_tvout *tvout)
+{
+ struct sti_tvout_encoder *encoder;
+ struct drm_encoder *drm_encoder;
+
+ encoder = devm_kzalloc(tvout->dev, sizeof(*encoder), GFP_KERNEL);
+ if (!encoder)
+ return NULL;
+
+ encoder->tvout = tvout;
+
+ drm_encoder = (struct drm_encoder *) encoder;
+
+ drm_encoder->possible_crtcs = ENCODER_MAIN_CRTC_MASK;
+ drm_encoder->possible_clones = 1 << 0;
+
+ drm_encoder_init(dev, drm_encoder,
+ &sti_tvout_encoder_funcs, DRM_MODE_ENCODER_DAC);
+
+ drm_encoder_helper_add(drm_encoder, &sti_hda_encoder_helper_funcs);
+
+ return drm_encoder;
+}
+
+static void sti_hdmi_encoder_commit(struct drm_encoder *encoder)
+{
+ struct sti_tvout *tvout = to_sti_tvout(encoder);
+
+ tvout_hdmi_start(tvout, true);
+}
+
+static void sti_hdmi_encoder_disable(struct drm_encoder *encoder)
+{
+ struct sti_tvout *tvout = to_sti_tvout(encoder);
+
+ /* reset VIP register */
+ tvout_write(tvout, 0x0, TVO_VIP_HDMI);
+}
+
+static const struct drm_encoder_helper_funcs sti_hdmi_encoder_helper_funcs = {
+ .dpms = sti_tvout_encoder_dpms,
+ .mode_fixup = sti_tvout_encoder_mode_fixup,
+ .mode_set = sti_tvout_encoder_mode_set,
+ .prepare = sti_tvout_encoder_prepare,
+ .commit = sti_hdmi_encoder_commit,
+ .disable = sti_hdmi_encoder_disable,
+};
+
+static struct drm_encoder *sti_tvout_create_hdmi_encoder(struct drm_device *dev,
+ struct sti_tvout *tvout)
+{
+ struct sti_tvout_encoder *encoder;
+ struct drm_encoder *drm_encoder;
+
+ encoder = devm_kzalloc(tvout->dev, sizeof(*encoder), GFP_KERNEL);
+ if (!encoder)
+ return NULL;
+
+ encoder->tvout = tvout;
+
+ drm_encoder = (struct drm_encoder *) encoder;
+
+ drm_encoder->possible_crtcs = ENCODER_MAIN_CRTC_MASK;
+ drm_encoder->possible_clones = 1 << 1;
+
+ drm_encoder_init(dev, drm_encoder,
+ &sti_tvout_encoder_funcs, DRM_MODE_ENCODER_TMDS);
+
+ drm_encoder_helper_add(drm_encoder, &sti_hdmi_encoder_helper_funcs);
+
+ return drm_encoder;
+}
+
+static void sti_tvout_create_encoders(struct drm_device *dev,
+ struct sti_tvout *tvout)
+{
+ tvout->hdmi = sti_tvout_create_hdmi_encoder(dev, tvout);
+ tvout->hda = sti_tvout_create_hda_encoder(dev, tvout);
+}
+
+static void sti_tvout_destroy_encoders(struct sti_tvout *tvout)
+{
+ if (tvout->hdmi)
+ drm_encoder_cleanup(tvout->hdmi);
+ tvout->hdmi = NULL;
+
+ if (tvout->hda)
+ drm_encoder_cleanup(tvout->hda);
+ tvout->hda = NULL;
+}
+
+static int sti_tvout_bind(struct device *dev, struct device *master, void *data)
+{
+ struct sti_tvout *tvout = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+ unsigned int i;
+ int ret;
+
+ tvout->drm_dev = drm_dev;
+
+ /* set preformatter matrix */
+ for (i = 0; i < 8; i++) {
+ tvout_write(tvout, rgb_to_ycbcr_601[i],
+ TVO_CSC_MAIN_M0 + (i * 4));
+ tvout_write(tvout, rgb_to_ycbcr_601[i],
+ TVO_CSC_AUX_M0 + (i * 4));
+ }
+
+ sti_tvout_create_encoders(drm_dev, tvout);
+
+ ret = component_bind_all(dev, drm_dev);
+ if (ret)
+ sti_tvout_destroy_encoders(tvout);
+
+ return ret;
+}
+
+static void sti_tvout_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ /* do nothing */
+}
+
+static const struct component_ops sti_tvout_ops = {
+ .bind = sti_tvout_bind,
+ .unbind = sti_tvout_unbind,
+};
+
+static int compare_of(struct device *dev, void *data)
+{
+ return dev->of_node == data;
+}
+
+static int sti_tvout_master_bind(struct device *dev)
+{
+ return 0;
+}
+
+static void sti_tvout_master_unbind(struct device *dev)
+{
+ /* do nothing */
+}
+
+static const struct component_master_ops sti_tvout_master_ops = {
+ .bind = sti_tvout_master_bind,
+ .unbind = sti_tvout_master_unbind,
+};
+
+static int sti_tvout_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct sti_tvout *tvout;
+ struct resource *res;
+ struct device_node *child_np;
+ struct component_match *match = NULL;
+
+ DRM_INFO("%s\n", __func__);
+
+ if (!node)
+ return -ENODEV;
+
+ tvout = devm_kzalloc(dev, sizeof(*tvout), GFP_KERNEL);
+ if (!tvout)
+ return -ENOMEM;
+
+ tvout->dev = dev;
+
+ /* get Memory ressources */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tvout-reg");
+ if (!res) {
+ DRM_ERROR("Invalid glue resource\n");
+ return -ENOMEM;
+ }
+ tvout->regs = devm_ioremap_nocache(dev, res->start, resource_size(res));
+ if (IS_ERR(tvout->regs))
+ return PTR_ERR(tvout->regs);
+
+ /* get reset resources */
+ tvout->reset = devm_reset_control_get(dev, "tvout");
+ /* take tvout out of reset */
+ if (!IS_ERR(tvout->reset))
+ reset_control_deassert(tvout->reset);
+
+ platform_set_drvdata(pdev, tvout);
+
+ of_platform_populate(node, NULL, NULL, dev);
+
+ child_np = of_get_next_available_child(node, NULL);
+
+ while (child_np) {
+ component_match_add(dev, &match, compare_of, child_np);
+ of_node_put(child_np);
+ child_np = of_get_next_available_child(node, child_np);
+ }
+
+ component_master_add_with_match(dev, &sti_tvout_master_ops, match);
+
+ return component_add(dev, &sti_tvout_ops);
+}
+
+static int sti_tvout_remove(struct platform_device *pdev)
+{
+ component_master_del(&pdev->dev, &sti_tvout_master_ops);
+ component_del(&pdev->dev, &sti_tvout_ops);
+ return 0;
+}
+
+static struct of_device_id tvout_of_match[] = {
+ { .compatible = "st,stih416-tvout", },
+ { .compatible = "st,stih407-tvout", },
+ { /* end node */ }
+};
+MODULE_DEVICE_TABLE(of, tvout_of_match);
+
+struct platform_driver sti_tvout_driver = {
+ .driver = {
+ .name = "sti-tvout",
+ .owner = THIS_MODULE,
+ .of_match_table = tvout_of_match,
+ },
+ .probe = sti_tvout_probe,
+ .remove = sti_tvout_remove,
+};
+
+module_platform_driver(sti_tvout_driver);
+
+MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver");
+MODULE_LICENSE("GPL");
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v8 07/11] drm: sti: add GDP layer
2014-07-30 17:41 [PATCH v8 00/11] Add DRM for stih4xx platforms Benjamin Gaignard
` (5 preceding siblings ...)
2014-07-30 17:42 ` [PATCH v8 06/11] drm: sti: add TVOut driver Benjamin Gaignard
@ 2014-07-30 17:42 ` Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 08/11] drm: sti: add VID layer Benjamin Gaignard
` (3 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-30 17:42 UTC (permalink / raw)
To: dri-devel, linaro-mm-sig, linux-kernel, airlied; +Cc: Benjamin Gaignard
Generic Display Pipeline are one of the compositor input sub-devices.
GDP are dedicated to graphic input like RGB plans.
GDP is part of Compositor hardware block which will be introduce later.
A sti_layer structure is used to abstract GDP calls from Compositor.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
---
drivers/gpu/drm/sti/Makefile | 6 +-
drivers/gpu/drm/sti/sti_gdp.c | 516 ++++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/sti/sti_gdp.h | 16 ++
drivers/gpu/drm/sti/sti_layer.h | 123 ++++++++++
4 files changed, 660 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/sti/sti_gdp.c
create mode 100644 drivers/gpu/drm/sti/sti_gdp.h
create mode 100644 drivers/gpu/drm/sti/sti_layer.h
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
index 5f6d96d..7de757f 100644
--- a/drivers/gpu/drm/sti/Makefile
+++ b/drivers/gpu/drm/sti/Makefile
@@ -1,3 +1,6 @@
+sticompositor-y := \
+ sti_gdp.o
+
stihdmi-y := sti_hdmi.o \
sti_hdmi_tx3g0c55phy.o \
sti_hdmi_tx3g4c28phy.o \
@@ -7,4 +10,5 @@ obj-$(CONFIG_DRM_STI) = \
sti_vtac.o \
stihdmi.o \
sti_hda.o \
- sti_tvout.o
\ No newline at end of file
+ sti_tvout.o \
+ sticompositor.o
diff --git a/drivers/gpu/drm/sti/sti_gdp.c b/drivers/gpu/drm/sti/sti_gdp.c
new file mode 100644
index 0000000..7f55767
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_gdp.c
@@ -0,0 +1,516 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ * Fabien Dessenne <fabien.dessenne@st.com>
+ * for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
+#include "sti_gdp.h"
+#include "sti_layer.h"
+#include "sti_vtg.h"
+
+#define ENA_COLOR_FILL BIT(8)
+#define WAIT_NEXT_VSYNC BIT(31)
+
+/* GDP color formats */
+#define GDP_RGB565 0x00
+#define GDP_RGB888 0x01
+#define GDP_RGB888_32 0x02
+#define GDP_ARGB8565 0x04
+#define GDP_ARGB8888 0x05
+#define GDP_ARGB1555 0x06
+#define GDP_ARGB4444 0x07
+#define GDP_CLUT8 0x0B
+#define GDP_YCBR888 0x10
+#define GDP_YCBR422R 0x12
+#define GDP_AYCBR8888 0x15
+
+#define GAM_GDP_CTL_OFFSET 0x00
+#define GAM_GDP_AGC_OFFSET 0x04
+#define GAM_GDP_VPO_OFFSET 0x0C
+#define GAM_GDP_VPS_OFFSET 0x10
+#define GAM_GDP_PML_OFFSET 0x14
+#define GAM_GDP_PMP_OFFSET 0x18
+#define GAM_GDP_SIZE_OFFSET 0x1C
+#define GAM_GDP_NVN_OFFSET 0x24
+#define GAM_GDP_KEY1_OFFSET 0x28
+#define GAM_GDP_KEY2_OFFSET 0x2C
+#define GAM_GDP_PPT_OFFSET 0x34
+#define GAM_GDP_CML_OFFSET 0x3C
+#define GAM_GDP_MST_OFFSET 0x68
+
+#define GAM_GDP_ALPHARANGE_255 BIT(5)
+#define GAM_GDP_AGC_FULL_RANGE 0x00808080
+#define GAM_GDP_PPT_IGNORE (BIT(1) | BIT(0))
+#define GAM_GDP_SIZE_MAX 0x7FF
+
+#define GDP_NODE_NB_BANK 2
+#define GDP_NODE_PER_FIELD 2
+
+struct sti_gdp_node {
+ u32 gam_gdp_ctl;
+ u32 gam_gdp_agc;
+ u32 reserved1;
+ u32 gam_gdp_vpo;
+ u32 gam_gdp_vps;
+ u32 gam_gdp_pml;
+ u32 gam_gdp_pmp;
+ u32 gam_gdp_size;
+ u32 reserved2;
+ u32 gam_gdp_nvn;
+ u32 gam_gdp_key1;
+ u32 gam_gdp_key2;
+ u32 reserved3;
+ u32 gam_gdp_ppt;
+ u32 reserved4;
+ u32 gam_gdp_cml;
+};
+
+struct sti_gdp_node_list {
+ struct sti_gdp_node *top_field;
+ struct sti_gdp_node *btm_field;
+};
+
+/**
+ * STI GDP structure
+ *
+ * @layer: layer structure
+ * @clk_pix: pixel clock for the current gdp
+ * @vtg_field_nb: callback for VTG FIELD (top or bottom) notification
+ * @is_curr_top: true if the current node processed is the top field
+ * @node_list: array of node list
+ */
+struct sti_gdp {
+ struct sti_layer layer;
+ struct clk *clk_pix;
+ struct notifier_block vtg_field_nb;
+ bool is_curr_top;
+ struct sti_gdp_node_list node_list[GDP_NODE_NB_BANK];
+};
+
+#define to_sti_gdp(x) container_of(x, struct sti_gdp, layer)
+
+static const uint32_t gdp_supported_formats[] = {
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_ARGB4444,
+ DRM_FORMAT_ARGB1555,
+ DRM_FORMAT_RGB565,
+ DRM_FORMAT_RGB888,
+ DRM_FORMAT_AYUV,
+ DRM_FORMAT_YUV444,
+ DRM_FORMAT_VYUY,
+ DRM_FORMAT_C8,
+};
+
+static const uint32_t *sti_gdp_get_formats(struct sti_layer *layer)
+{
+ return gdp_supported_formats;
+}
+
+static unsigned int sti_gdp_get_nb_formats(struct sti_layer *layer)
+{
+ return ARRAY_SIZE(gdp_supported_formats);
+}
+
+static int sti_gdp_fourcc2format(int fourcc)
+{
+ switch (fourcc) {
+ case DRM_FORMAT_XRGB8888:
+ return GDP_RGB888_32;
+ case DRM_FORMAT_ARGB8888:
+ return GDP_ARGB8888;
+ case DRM_FORMAT_ARGB4444:
+ return GDP_ARGB4444;
+ case DRM_FORMAT_ARGB1555:
+ return GDP_ARGB1555;
+ case DRM_FORMAT_RGB565:
+ return GDP_RGB565;
+ case DRM_FORMAT_RGB888:
+ return GDP_RGB888;
+ case DRM_FORMAT_AYUV:
+ return GDP_AYCBR8888;
+ case DRM_FORMAT_YUV444:
+ return GDP_YCBR888;
+ case DRM_FORMAT_VYUY:
+ return GDP_YCBR422R;
+ case DRM_FORMAT_C8:
+ return GDP_CLUT8;
+ }
+ return -1;
+}
+
+static int sti_gdp_get_alpharange(int format)
+{
+ switch (format) {
+ case GDP_ARGB8565:
+ case GDP_ARGB8888:
+ case GDP_AYCBR8888:
+ return GAM_GDP_ALPHARANGE_255;
+ }
+ return 0;
+}
+
+/**
+ * sti_gdp_get_free_nodes
+ * @layer: gdp layer
+ *
+ * Look for a GDP node list that is not currently read by the HW.
+ *
+ * RETURNS:
+ * Pointer to the free GDP node list
+ */
+static struct sti_gdp_node_list *sti_gdp_get_free_nodes(struct sti_layer *layer)
+{
+ int hw_nvn;
+ void *virt_nvn;
+ struct sti_gdp *gdp = to_sti_gdp(layer);
+ unsigned int i;
+
+ hw_nvn = readl(layer->regs + GAM_GDP_NVN_OFFSET);
+ if (!hw_nvn)
+ goto end;
+
+ virt_nvn = dma_to_virt(layer->dev, (dma_addr_t) hw_nvn);
+
+ for (i = 0; i < GDP_NODE_NB_BANK; i++)
+ if ((virt_nvn != gdp->node_list[i].btm_field) &&
+ (virt_nvn != gdp->node_list[i].top_field))
+ return &gdp->node_list[i];
+
+end:
+ return &gdp->node_list[0];
+}
+
+/**
+ * sti_gdp_get_current_nodes
+ * @layer: GDP layer
+ *
+ * Look for GDP nodes that are currently read by the HW.
+ *
+ * RETURNS:
+ * Pointer to the current GDP node list
+ */
+static
+struct sti_gdp_node_list *sti_gdp_get_current_nodes(struct sti_layer *layer)
+{
+ int hw_nvn;
+ void *virt_nvn;
+ struct sti_gdp *gdp = to_sti_gdp(layer);
+ unsigned int i;
+
+ hw_nvn = readl(layer->regs + GAM_GDP_NVN_OFFSET);
+ if (!hw_nvn)
+ goto end;
+
+ virt_nvn = dma_to_virt(layer->dev, (dma_addr_t) hw_nvn);
+
+ for (i = 0; i < GDP_NODE_NB_BANK; i++)
+ if ((virt_nvn == gdp->node_list[i].btm_field) ||
+ (virt_nvn == gdp->node_list[i].top_field))
+ return &gdp->node_list[i];
+
+end:
+ return NULL;
+}
+
+/**
+ * sti_gdp_prepare_layer
+ * @lay: gdp layer
+ * @first_prepare: true if it is the first time this function is called
+ *
+ * Update the free GDP node list according to the layer properties.
+ *
+ * RETURNS:
+ * 0 on success.
+ */
+static int sti_gdp_prepare_layer(struct sti_layer *layer, bool first_prepare)
+{
+ struct sti_gdp_node_list *list;
+ struct sti_gdp_node *top_field, *btm_field;
+ struct drm_display_mode *mode = layer->mode;
+ struct device *dev = layer->dev;
+ struct sti_gdp *gdp = to_sti_gdp(layer);
+ int format;
+ unsigned int depth, bpp;
+ int rate = mode->clock * 1000;
+ int res;
+ u32 ydo, xdo, yds, xds;
+
+ list = sti_gdp_get_free_nodes(layer);
+ top_field = list->top_field;
+ btm_field = list->btm_field;
+
+ /* Build the top field from layer params */
+ top_field->gam_gdp_agc = GAM_GDP_AGC_FULL_RANGE;
+ top_field->gam_gdp_ctl = WAIT_NEXT_VSYNC;
+ format = sti_gdp_fourcc2format(layer->format);
+ if (format == -1) {
+ DRM_ERROR("Format not supported by GDP %.4s\n",
+ (char *)&layer->format);
+ return 1;
+ }
+ top_field->gam_gdp_ctl |= format;
+ top_field->gam_gdp_ctl |= sti_gdp_get_alpharange(format);
+ top_field->gam_gdp_ppt &= ~GAM_GDP_PPT_IGNORE;
+
+ /* pixel memory location */
+ drm_fb_get_bpp_depth(layer->format, &depth, &bpp);
+ top_field->gam_gdp_pml = (u32) layer->paddr + layer->offsets[0];
+ top_field->gam_gdp_pml += layer->src_x * (bpp >> 3);
+ top_field->gam_gdp_pml += layer->src_y * layer->pitches[0];
+
+ /* input parameters */
+ top_field->gam_gdp_pmp = layer->pitches[0];
+ top_field->gam_gdp_size =
+ clamp_val(layer->src_h, 0, GAM_GDP_SIZE_MAX) << 16 |
+ clamp_val(layer->src_w, 0, GAM_GDP_SIZE_MAX);
+
+ /* output parameters */
+ ydo = sti_vtg_get_line_number(*mode, layer->dst_y);
+ yds = sti_vtg_get_line_number(*mode, layer->dst_y + layer->dst_h - 1);
+ xdo = sti_vtg_get_pixel_number(*mode, layer->dst_x);
+ xds = sti_vtg_get_pixel_number(*mode, layer->dst_x + layer->dst_w - 1);
+ top_field->gam_gdp_vpo = (ydo << 16) | xdo;
+ top_field->gam_gdp_vps = (yds << 16) | xds;
+
+ /* Same content and chained together */
+ memcpy(btm_field, top_field, sizeof(*btm_field));
+ top_field->gam_gdp_nvn = virt_to_dma(dev, btm_field);
+ btm_field->gam_gdp_nvn = virt_to_dma(dev, top_field);
+
+ /* Interlaced mode */
+ if (layer->mode->flags & DRM_MODE_FLAG_INTERLACE)
+ btm_field->gam_gdp_pml = top_field->gam_gdp_pml +
+ layer->pitches[0];
+
+ if (first_prepare) {
+ /* Set and enable gdp clock */
+ if (gdp->clk_pix) {
+ res = clk_set_rate(gdp->clk_pix, rate);
+ if (res < 0) {
+ DRM_ERROR("Cannot set rate (%dHz) for gdp\n",
+ rate);
+ return 1;
+ }
+
+ if (clk_prepare_enable(gdp->clk_pix)) {
+ DRM_ERROR("Failed to prepare/enable gdp\n");
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * sti_gdp_commit_layer
+ * @lay: gdp layer
+ *
+ * Update the NVN field of the 'right' field of the current GDP node (being
+ * used by the HW) with the address of the updated ('free') top field GDP node.
+ * - In interlaced mode the 'right' field is the bottom field as we update
+ * frames starting from their top field
+ * - In progressive mode, we update both bottom and top fields which are
+ * equal nodes.
+ * At the next VSYNC, the updated node list will be used by the HW.
+ *
+ * RETURNS:
+ * 0 on success.
+ */
+static int sti_gdp_commit_layer(struct sti_layer *layer)
+{
+ struct sti_gdp_node_list *updated_list = sti_gdp_get_free_nodes(layer);
+ struct sti_gdp_node *updated_top_node = updated_list->top_field;
+ struct sti_gdp_node *updated_btm_node = updated_list->btm_field;
+ struct sti_gdp *gdp = to_sti_gdp(layer);
+ u32 dma_updated_top = virt_to_dma(layer->dev, updated_top_node);
+ u32 dma_updated_btm = virt_to_dma(layer->dev, updated_btm_node);
+ struct sti_gdp_node_list *curr_list = sti_gdp_get_current_nodes(layer);
+
+ dev_dbg(layer->dev, "Current NVN:0x%X\n",
+ readl(layer->regs + GAM_GDP_NVN_OFFSET));
+ dev_dbg(layer->dev, "Posted buff: %lx current buff: %x\n",
+ (unsigned long)layer->paddr,
+ readl(layer->regs + GAM_GDP_PML_OFFSET));
+
+ if (curr_list == NULL) {
+ /* First update or invalid node should directly write in the
+ * hw register */
+ writel(gdp->is_curr_top == true ?
+ dma_updated_btm : dma_updated_top,
+ layer->regs + GAM_GDP_NVN_OFFSET);
+ return 0;
+ }
+
+ if (layer->mode->flags & DRM_MODE_FLAG_INTERLACE) {
+ if (gdp->is_curr_top == true) {
+ /* Do not update in the middle of the frame, but
+ * postpone the update after the bottom field has
+ * been displayed */
+ curr_list->btm_field->gam_gdp_nvn = dma_updated_top;
+ } else {
+ /* Direct update to avoid one frame delay */
+ writel(dma_updated_top,
+ layer->regs + GAM_GDP_NVN_OFFSET);
+ }
+ } else {
+ /* Direct update for progressive to avoid one frame delay */
+ writel(dma_updated_top, layer->regs + GAM_GDP_NVN_OFFSET);
+ }
+
+ return 0;
+}
+
+/**
+ * sti_gdp_disable_layer
+ * @lay: gdp layer
+ *
+ * Disable a GDP.
+ *
+ * RETURNS:
+ * 0 on success.
+ */
+static int sti_gdp_disable_layer(struct sti_layer *layer)
+{
+ unsigned int i;
+ struct sti_gdp *gdp = to_sti_gdp(layer);
+
+ /* Set the nodes as 'to be ignored on mixer' */
+ for (i = 0; i < GDP_NODE_NB_BANK; i++) {
+ gdp->node_list[i].top_field->gam_gdp_ppt |= GAM_GDP_PPT_IGNORE;
+ gdp->node_list[i].btm_field->gam_gdp_ppt |= GAM_GDP_PPT_IGNORE;
+ }
+
+ if (gdp->clk_pix)
+ clk_disable_unprepare(gdp->clk_pix);
+
+ return 0;
+}
+
+/**
+ * sti_gdp_field_cb
+ * @nb: notifier block
+ * @event: event message
+ * @data: private data
+ *
+ * Handle VTG top field and bottom field event.
+ *
+ * RETURNS:
+ * 0 on success.
+ */
+int sti_gdp_field_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct sti_gdp *gdp = container_of(nb, struct sti_gdp, vtg_field_nb);
+
+ switch (event) {
+ case VTG_TOP_FIELD_EVENT:
+ gdp->is_curr_top = true;
+ break;
+ case VTG_BOTTOM_FIELD_EVENT:
+ gdp->is_curr_top = false;
+ break;
+ default:
+ DRM_ERROR("unsupported event: %lu\n", event);
+ break;
+ }
+
+ return 0;
+}
+
+static void sti_gdp_init(struct sti_layer *layer)
+{
+ struct sti_gdp *gdp = to_sti_gdp(layer);
+ struct device_node *np = layer->dev->of_node;
+ dma_addr_t dma;
+ void *base;
+ unsigned int i, size;
+
+ /* Allocate all the nodes within a single memory page */
+ size = sizeof(struct sti_gdp_node) *
+ GDP_NODE_PER_FIELD * GDP_NODE_NB_BANK;
+
+ base = dma_alloc_writecombine(layer->dev,
+ size, &dma, GFP_KERNEL | GFP_DMA);
+ if (!base) {
+ DRM_ERROR("Failed to allocate memory for GDP node\n");
+ return;
+ }
+ memset(base, 0, size);
+
+ for (i = 0; i < GDP_NODE_NB_BANK; i++) {
+ if (virt_to_dma(layer->dev, base) & 0xF) {
+ DRM_ERROR("Mem alignment failed\n");
+ return;
+ }
+ gdp->node_list[i].top_field = base;
+ DRM_DEBUG_DRIVER("node[%d].top_field=%p\n", i, base);
+ base += sizeof(struct sti_gdp_node);
+
+ if (virt_to_dma(layer->dev, base) & 0xF) {
+ DRM_ERROR("Mem alignment failed\n");
+ return;
+ }
+ gdp->node_list[i].btm_field = base;
+ DRM_DEBUG_DRIVER("node[%d].btm_field=%p\n", i, base);
+ base += sizeof(struct sti_gdp_node);
+ }
+
+ if (of_device_is_compatible(np, "st,stih407-compositor")) {
+ /* GDP of STiH407 chip have its own pixel clock */
+ char *clk_name;
+
+ switch (layer->desc) {
+ case STI_GDP_0:
+ clk_name = "pix_gdp1";
+ break;
+ case STI_GDP_1:
+ clk_name = "pix_gdp2";
+ break;
+ case STI_GDP_2:
+ clk_name = "pix_gdp3";
+ break;
+ case STI_GDP_3:
+ clk_name = "pix_gdp4";
+ break;
+ default:
+ DRM_ERROR("GDP id not recognized\n");
+ return;
+ }
+
+ gdp->clk_pix = devm_clk_get(layer->dev, clk_name);
+ if (IS_ERR(gdp->clk_pix))
+ DRM_ERROR("Cannot get %s clock\n", clk_name);
+ }
+}
+
+static const struct sti_layer_funcs gdp_ops = {
+ .get_formats = sti_gdp_get_formats,
+ .get_nb_formats = sti_gdp_get_nb_formats,
+ .init = sti_gdp_init,
+ .prepare = sti_gdp_prepare_layer,
+ .commit = sti_gdp_commit_layer,
+ .disable = sti_gdp_disable_layer,
+};
+
+struct sti_layer *sti_gdp_create(struct device *dev, int id)
+{
+ struct sti_gdp *gdp;
+
+ gdp = devm_kzalloc(dev, sizeof(*gdp), GFP_KERNEL);
+ if (!gdp) {
+ DRM_ERROR("Failed to allocate memory for GDP\n");
+ return NULL;
+ }
+
+ gdp->layer.ops = &gdp_ops;
+ gdp->vtg_field_nb.notifier_call = sti_gdp_field_cb;
+
+ return (struct sti_layer *)gdp;
+}
diff --git a/drivers/gpu/drm/sti/sti_gdp.h b/drivers/gpu/drm/sti/sti_gdp.h
new file mode 100644
index 0000000..1dab682
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_gdp.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ * Fabien Dessenne <fabien.dessenne@st.com>
+ * for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_GDP_H_
+#define _STI_GDP_H_
+
+#include <linux/types.h>
+
+struct sti_layer *sti_gdp_create(struct device *dev, int id);
+
+#endif
diff --git a/drivers/gpu/drm/sti/sti_layer.h b/drivers/gpu/drm/sti/sti_layer.h
new file mode 100644
index 0000000..198c377
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_layer.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ * Fabien Dessenne <fabien.dessenne@st.com>
+ * for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_LAYER_H_
+#define _STI_LAYER_H_
+
+#include <drm/drmP.h>
+
+#define to_sti_layer(x) container_of(x, struct sti_layer, plane)
+
+#define STI_LAYER_TYPE_SHIFT 8
+#define STI_LAYER_TYPE_MASK (~((1<<STI_LAYER_TYPE_SHIFT)-1))
+
+struct sti_layer;
+
+enum sti_layer_type {
+ STI_GDP = 1 << STI_LAYER_TYPE_SHIFT,
+ STI_VID = 2 << STI_LAYER_TYPE_SHIFT,
+ STI_CUR = 3 << STI_LAYER_TYPE_SHIFT,
+ STI_BCK = 4 << STI_LAYER_TYPE_SHIFT
+};
+
+enum sti_layer_id_of_type {
+ STI_ID_0 = 0,
+ STI_ID_1 = 1,
+ STI_ID_2 = 2,
+ STI_ID_3 = 3
+};
+
+enum sti_layer_desc {
+ STI_GDP_0 = STI_GDP | STI_ID_0,
+ STI_GDP_1 = STI_GDP | STI_ID_1,
+ STI_GDP_2 = STI_GDP | STI_ID_2,
+ STI_GDP_3 = STI_GDP | STI_ID_3,
+ STI_VID_0 = STI_VID | STI_ID_0,
+ STI_VID_1 = STI_VID | STI_ID_1,
+ STI_CURSOR = STI_CUR,
+ STI_BACK = STI_BCK
+};
+
+/**
+ * STI layer functions structure
+ *
+ * @get_formats: get layer supported formats
+ * @get_nb_formats: get number of format supported
+ * @init: initialize the layer
+ * @prepare: prepare layer before rendering
+ * @commit: set layer for rendering
+ * @disable: disable layer
+ */
+struct sti_layer_funcs {
+ const uint32_t* (*get_formats)(struct sti_layer *layer);
+ unsigned int (*get_nb_formats)(struct sti_layer *layer);
+ void (*init)(struct sti_layer *layer);
+ int (*prepare)(struct sti_layer *layer, bool first_prepare);
+ int (*commit)(struct sti_layer *layer);
+ int (*disable)(struct sti_layer *layer);
+};
+
+/**
+ * STI layer structure
+ *
+ * @plane: drm plane it is bound to (if any)
+ * @fb: drm fb it is bound to
+ * @mode: display mode
+ * @desc: layer type & id
+ * @device: driver device
+ * @regs: layer registers
+ * @ops: layer functions
+ * @zorder: layer z-order
+ * @mixer_id: id of the mixer used to display the layer
+ * @enabled: to know if the layer is active or not
+ * @src_x src_y: coordinates of the input (fb) area
+ * @src_w src_h: size of the input (fb) area
+ * @dst_x dst_y: coordinates of the output (crtc) area
+ * @dst_w dst_h: size of the output (crtc) area
+ * @format: format
+ * @pitches: pitch of 'planes' (eg: Y, U, V)
+ * @offsets: offset of 'planes'
+ * @paddr: physical address of the input buffer
+ */
+struct sti_layer {
+ struct drm_plane plane;
+ struct drm_framebuffer *fb;
+ struct drm_display_mode *mode;
+ enum sti_layer_desc desc;
+ struct device *dev;
+ void __iomem *regs;
+ const struct sti_layer_funcs *ops;
+ int zorder;
+ int mixer_id;
+ bool enabled;
+ int src_x, src_y;
+ int src_w, src_h;
+ int dst_x, dst_y;
+ int dst_w, dst_h;
+ uint32_t format;
+ unsigned int pitches[4];
+ unsigned int offsets[4];
+ dma_addr_t paddr;
+};
+
+struct sti_layer *sti_layer_create(struct device *dev, int desc,
+ void __iomem *baseaddr);
+int sti_layer_prepare(struct sti_layer *layer, struct drm_framebuffer *fb,
+ struct drm_display_mode *mode,
+ int mixer_id,
+ int dest_x, int dest_y,
+ int dest_w, int dest_h,
+ int src_x, int src_y,
+ int src_w, int src_h);
+int sti_layer_commit(struct sti_layer *layer);
+int sti_layer_disable(struct sti_layer *layer);
+const uint32_t *sti_layer_get_formats(struct sti_layer *layer);
+unsigned int sti_layer_get_nb_formats(struct sti_layer *layer);
+const char *sti_layer_to_str(struct sti_layer *layer);
+
+#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v8 08/11] drm: sti: add VID layer
2014-07-30 17:41 [PATCH v8 00/11] Add DRM for stih4xx platforms Benjamin Gaignard
` (6 preceding siblings ...)
2014-07-30 17:42 ` [PATCH v8 07/11] drm: sti: add GDP layer Benjamin Gaignard
@ 2014-07-30 17:42 ` Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 09/11] drm: sti: add Mixer Benjamin Gaignard
` (2 subsequent siblings)
10 siblings, 0 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-30 17:42 UTC (permalink / raw)
To: dri-devel, linaro-mm-sig, linux-kernel, airlied; +Cc: Benjamin Gaignard
VIDeo plug are one of the compositor input sub-devices.
VID are dedicated to video inputs like YUV plans.
Like GDP, VID are part of Compositor hardware block
and use sti_layer structure to provide an abstraction for
Compositor calls.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
---
drivers/gpu/drm/sti/Makefile | 3 +-
drivers/gpu/drm/sti/sti_vid.c | 138 ++++++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/sti/sti_vid.h | 12 ++++
3 files changed, 152 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/sti/sti_vid.c
create mode 100644 drivers/gpu/drm/sti/sti_vid.h
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
index 7de757f..9b613d2 100644
--- a/drivers/gpu/drm/sti/Makefile
+++ b/drivers/gpu/drm/sti/Makefile
@@ -1,5 +1,6 @@
sticompositor-y := \
- sti_gdp.o
+ sti_gdp.o \
+ sti_vid.o
stihdmi-y := sti_hdmi.o \
sti_hdmi_tx3g0c55phy.o \
diff --git a/drivers/gpu/drm/sti/sti_vid.c b/drivers/gpu/drm/sti/sti_vid.c
new file mode 100644
index 0000000..10ced6a
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_vid.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Fabien Dessenne <fabien.dessenne@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <drm/drmP.h>
+
+#include "sti_layer.h"
+#include "sti_vid.h"
+#include "sti_vtg.h"
+
+/* Registers */
+#define VID_CTL 0x00
+#define VID_ALP 0x04
+#define VID_CLF 0x08
+#define VID_VPO 0x0C
+#define VID_VPS 0x10
+#define VID_KEY1 0x28
+#define VID_KEY2 0x2C
+#define VID_MPR0 0x30
+#define VID_MPR1 0x34
+#define VID_MPR2 0x38
+#define VID_MPR3 0x3C
+#define VID_MST 0x68
+#define VID_BC 0x70
+#define VID_TINT 0x74
+#define VID_CSAT 0x78
+
+/* Registers values */
+#define VID_CTL_IGNORE (BIT(31) | BIT(30))
+#define VID_CTL_PSI_ENABLE (BIT(2) | BIT(1) | BIT(0))
+#define VID_ALP_OPAQUE 0x00000080
+#define VID_BC_DFLT 0x00008000
+#define VID_TINT_DFLT 0x00000000
+#define VID_CSAT_DFLT 0x00000080
+/* YCbCr to RGB BT709:
+ * R = Y+1.5391Cr
+ * G = Y-0.4590Cr-0.1826Cb
+ * B = Y+1.8125Cb */
+#define VID_MPR0_BT709 0x0A800000
+#define VID_MPR1_BT709 0x0AC50000
+#define VID_MPR2_BT709 0x07150545
+#define VID_MPR3_BT709 0x00000AE8
+
+static int sti_vid_prepare_layer(struct sti_layer *vid, bool first_prepare)
+{
+ u32 val;
+
+ /* Unmask */
+ val = readl(vid->regs + VID_CTL);
+ val &= ~VID_CTL_IGNORE;
+ writel(val, vid->regs + VID_CTL);
+
+ return 0;
+}
+
+static int sti_vid_commit_layer(struct sti_layer *vid)
+{
+ struct drm_display_mode *mode = vid->mode;
+ u32 ydo, xdo, yds, xds;
+
+ ydo = sti_vtg_get_line_number(*mode, vid->dst_y);
+ yds = sti_vtg_get_line_number(*mode, vid->dst_y + vid->dst_h - 1);
+ xdo = sti_vtg_get_pixel_number(*mode, vid->dst_x);
+ xds = sti_vtg_get_pixel_number(*mode, vid->dst_x + vid->dst_w - 1);
+
+ writel((ydo << 16) | xdo, vid->regs + VID_VPO);
+ writel((yds << 16) | xds, vid->regs + VID_VPS);
+
+ return 0;
+}
+
+static int sti_vid_disable_layer(struct sti_layer *vid)
+{
+ u32 val;
+
+ /* Mask */
+ val = readl(vid->regs + VID_CTL);
+ val |= VID_CTL_IGNORE;
+ writel(val, vid->regs + VID_CTL);
+
+ return 0;
+}
+
+static const uint32_t *sti_vid_get_formats(struct sti_layer *layer)
+{
+ return NULL;
+}
+
+static unsigned int sti_vid_get_nb_formats(struct sti_layer *layer)
+{
+ return 0;
+}
+
+static void sti_vid_init(struct sti_layer *vid)
+{
+ /* Enable PSI, Mask layer */
+ writel(VID_CTL_PSI_ENABLE | VID_CTL_IGNORE, vid->regs + VID_CTL);
+
+ /* Opaque */
+ writel(VID_ALP_OPAQUE, vid->regs + VID_ALP);
+
+ /* Color conversion parameters */
+ writel(VID_MPR0_BT709, vid->regs + VID_MPR0);
+ writel(VID_MPR1_BT709, vid->regs + VID_MPR1);
+ writel(VID_MPR2_BT709, vid->regs + VID_MPR2);
+ writel(VID_MPR3_BT709, vid->regs + VID_MPR3);
+
+ /* Brightness, contrast, tint, saturation */
+ writel(VID_BC_DFLT, vid->regs + VID_BC);
+ writel(VID_TINT_DFLT, vid->regs + VID_TINT);
+ writel(VID_CSAT_DFLT, vid->regs + VID_CSAT);
+}
+
+static const struct sti_layer_funcs vid_ops = {
+ .get_formats = sti_vid_get_formats,
+ .get_nb_formats = sti_vid_get_nb_formats,
+ .init = sti_vid_init,
+ .prepare = sti_vid_prepare_layer,
+ .commit = sti_vid_commit_layer,
+ .disable = sti_vid_disable_layer,
+};
+
+struct sti_layer *sti_vid_create(struct device *dev)
+{
+ struct sti_layer *vid;
+
+ vid = devm_kzalloc(dev, sizeof(*vid), GFP_KERNEL);
+ if (!vid) {
+ DRM_ERROR("Failed to allocate memory for VID\n");
+ return NULL;
+ }
+
+ vid->ops = &vid_ops;
+
+ return vid;
+}
diff --git a/drivers/gpu/drm/sti/sti_vid.h b/drivers/gpu/drm/sti/sti_vid.h
new file mode 100644
index 0000000..2c0aecd
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_vid.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Fabien Dessenne <fabien.dessenne@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_VID_H_
+#define _STI_VID_H_
+
+struct sti_layer *sti_vid_create(struct device *dev);
+
+#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v8 09/11] drm: sti: add Mixer
2014-07-30 17:41 [PATCH v8 00/11] Add DRM for stih4xx platforms Benjamin Gaignard
` (7 preceding siblings ...)
2014-07-30 17:42 ` [PATCH v8 08/11] drm: sti: add VID layer Benjamin Gaignard
@ 2014-07-30 17:42 ` Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 10/11] drm: sti: add Compositor Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 11/11] drm: sti: Add DRM driver itself Benjamin Gaignard
10 siblings, 0 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-30 17:42 UTC (permalink / raw)
To: dri-devel, linaro-mm-sig, linux-kernel, airlied; +Cc: Benjamin Gaignard
Mixer hardware IP is responsible of mixing the different inputs layers.
Z-order is managed by the mixer.
We could 2 mixers: one for main path and one for auxillary path
Mixers are part of Compositor hardware block
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
---
drivers/gpu/drm/sti/Makefile | 3 +-
drivers/gpu/drm/sti/sti_mixer.c | 243 ++++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/sti/sti_mixer.h | 54 +++++++++
3 files changed, 299 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/sti/sti_mixer.c
create mode 100644 drivers/gpu/drm/sti/sti_mixer.h
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
index 9b613d2..4a3a816 100644
--- a/drivers/gpu/drm/sti/Makefile
+++ b/drivers/gpu/drm/sti/Makefile
@@ -1,4 +1,5 @@
sticompositor-y := \
+ sti_mixer.o \
sti_gdp.o \
sti_vid.o
@@ -12,4 +13,4 @@ obj-$(CONFIG_DRM_STI) = \
stihdmi.o \
sti_hda.o \
sti_tvout.o \
- sticompositor.o
+ sticompositor.o
\ No newline at end of file
diff --git a/drivers/gpu/drm/sti/sti_mixer.c b/drivers/gpu/drm/sti/sti_mixer.c
new file mode 100644
index 0000000..5fa6dc5
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_mixer.c
@@ -0,0 +1,243 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ * Fabien Dessenne <fabien.dessenne@st.com>
+ * for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include "sti_mixer.h"
+#include "sti_vtg.h"
+
+/* Identity: G=Y , B=Cb , R=Cr */
+static const u32 mixerColorSpaceMatIdentity[] = {
+ 0x10000000, 0x00000000, 0x10000000, 0x00001000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000
+};
+
+/* regs offset */
+#define GAM_MIXER_CTL 0x00
+#define GAM_MIXER_BKC 0x04
+#define GAM_MIXER_BCO 0x0C
+#define GAM_MIXER_BCS 0x10
+#define GAM_MIXER_AVO 0x28
+#define GAM_MIXER_AVS 0x2C
+#define GAM_MIXER_CRB 0x34
+#define GAM_MIXER_ACT 0x38
+#define GAM_MIXER_MBP 0x3C
+#define GAM_MIXER_MX0 0x80
+
+/* id for depth of CRB reg */
+#define GAM_DEPTH_VID0_ID 1
+#define GAM_DEPTH_VID1_ID 2
+#define GAM_DEPTH_GDP0_ID 3
+#define GAM_DEPTH_GDP1_ID 4
+#define GAM_DEPTH_GDP2_ID 5
+#define GAM_DEPTH_GDP3_ID 6
+#define GAM_DEPTH_MASK_ID 7
+
+/* mask in CTL reg */
+#define GAM_CTL_BACK_MASK BIT(0)
+#define GAM_CTL_VID0_MASK BIT(1)
+#define GAM_CTL_VID1_MASK BIT(2)
+#define GAM_CTL_GDP0_MASK BIT(3)
+#define GAM_CTL_GDP1_MASK BIT(4)
+#define GAM_CTL_GDP2_MASK BIT(5)
+#define GAM_CTL_GDP3_MASK BIT(6)
+
+const char *sti_mixer_to_str(struct sti_mixer *mixer)
+{
+ switch (mixer->id) {
+ case STI_MIXER_MAIN:
+ return "MAIN_MIXER";
+ case STI_MIXER_AUX:
+ return "AUX_MIXER";
+ default:
+ return "<UNKNOWN MIXER>";
+ }
+}
+
+static inline u32 sti_mixer_reg_read(struct sti_mixer *mixer, u32 reg_id)
+{
+ return readl(mixer->regs + reg_id);
+}
+
+static inline void sti_mixer_reg_write(struct sti_mixer *mixer,
+ u32 reg_id, u32 val)
+{
+ writel(val, mixer->regs + reg_id);
+}
+
+void sti_mixer_set_background_status(struct sti_mixer *mixer, bool enable)
+{
+ u32 val = sti_mixer_reg_read(mixer, GAM_MIXER_CTL);
+
+ val &= ~GAM_CTL_BACK_MASK;
+ val |= enable;
+ sti_mixer_reg_write(mixer, GAM_MIXER_CTL, val);
+}
+
+static void sti_mixer_set_background_color(struct sti_mixer *mixer,
+ u8 red, u8 green, u8 blue)
+{
+ u32 val = (red << 16) | (green << 8) | blue;
+
+ sti_mixer_reg_write(mixer, GAM_MIXER_BKC, val);
+}
+
+static void sti_mixer_set_background_area(struct sti_mixer *mixer,
+ struct drm_display_mode *mode)
+{
+ u32 ydo, xdo, yds, xds;
+
+ ydo = sti_vtg_get_line_number(*mode, 0);
+ yds = sti_vtg_get_line_number(*mode, mode->vdisplay - 1);
+ xdo = sti_vtg_get_pixel_number(*mode, 0);
+ xds = sti_vtg_get_pixel_number(*mode, mode->hdisplay - 1);
+
+ sti_mixer_reg_write(mixer, GAM_MIXER_BCO, ydo << 16 | xdo);
+ sti_mixer_reg_write(mixer, GAM_MIXER_BCS, yds << 16 | xds);
+}
+
+int sti_mixer_set_layer_depth(struct sti_mixer *mixer, struct sti_layer *layer)
+{
+ int layer_id = 0, depth = layer->zorder;
+ u32 mask, val;
+
+ if (depth >= GAM_MIXER_NB_DEPTH_LEVEL)
+ return 1;
+
+ switch (layer->desc) {
+ case STI_GDP_0:
+ layer_id = GAM_DEPTH_GDP0_ID;
+ break;
+ case STI_GDP_1:
+ layer_id = GAM_DEPTH_GDP1_ID;
+ break;
+ case STI_GDP_2:
+ layer_id = GAM_DEPTH_GDP2_ID;
+ break;
+ case STI_GDP_3:
+ layer_id = GAM_DEPTH_GDP3_ID;
+ break;
+ case STI_VID_0:
+ layer_id = GAM_DEPTH_VID0_ID;
+ break;
+ case STI_VID_1:
+ layer_id = GAM_DEPTH_VID1_ID;
+ break;
+ default:
+ DRM_ERROR("Unknown layer %d\n", layer->desc);
+ return 1;
+ }
+ mask = GAM_DEPTH_MASK_ID << (3 * depth);
+ layer_id = layer_id << (3 * depth);
+
+ dev_dbg(mixer->dev, "GAM_MIXER_CRB val 0x%x mask 0x%x\n",
+ layer_id, mask);
+
+ val = sti_mixer_reg_read(mixer, GAM_MIXER_CRB);
+ val &= ~mask;
+ val |= layer_id;
+ sti_mixer_reg_write(mixer, GAM_MIXER_CRB, val);
+
+ dev_dbg(mixer->dev, "Read GAM_MIXER_CRB 0x%x\n",
+ sti_mixer_reg_read(mixer, GAM_MIXER_CRB));
+ return 0;
+}
+
+int sti_mixer_active_video_area(struct sti_mixer *mixer,
+ struct drm_display_mode *mode)
+{
+ u32 ydo, xdo, yds, xds;
+
+ ydo = sti_vtg_get_line_number(*mode, 0);
+ yds = sti_vtg_get_line_number(*mode, mode->vdisplay - 1);
+ xdo = sti_vtg_get_pixel_number(*mode, 0);
+ xds = sti_vtg_get_pixel_number(*mode, mode->hdisplay - 1);
+
+ DRM_DEBUG_DRIVER("%s active video area xdo:%d ydo:%d xds:%d yds:%d\n",
+ sti_mixer_to_str(mixer), xdo, ydo, xds, yds);
+ sti_mixer_reg_write(mixer, GAM_MIXER_AVO, ydo << 16 | xdo);
+ sti_mixer_reg_write(mixer, GAM_MIXER_AVS, yds << 16 | xds);
+
+ sti_mixer_set_background_color(mixer, 0xFF, 0, 0);
+
+ sti_mixer_set_background_area(mixer, mode);
+ sti_mixer_set_background_status(mixer, true);
+ return 0;
+}
+
+static u32 sti_mixer_get_layer_mask(struct sti_layer *layer)
+{
+ switch (layer->desc) {
+ case STI_BACK:
+ return GAM_CTL_BACK_MASK;
+ case STI_GDP_0:
+ return GAM_CTL_GDP0_MASK;
+ case STI_GDP_1:
+ return GAM_CTL_GDP1_MASK;
+ case STI_GDP_2:
+ return GAM_CTL_GDP2_MASK;
+ case STI_GDP_3:
+ return GAM_CTL_GDP3_MASK;
+ case STI_VID_0:
+ return GAM_CTL_VID0_MASK;
+ case STI_VID_1:
+ return GAM_CTL_VID1_MASK;
+ default:
+ return 0;
+ }
+}
+
+int sti_mixer_set_layer_status(struct sti_mixer *mixer,
+ struct sti_layer *layer, bool status)
+{
+ u32 mask, val;
+
+ mask = sti_mixer_get_layer_mask(layer);
+ if (!mask) {
+ DRM_ERROR("Can not find layer mask\n");
+ return -EINVAL;
+ }
+
+ val = sti_mixer_reg_read(mixer, GAM_MIXER_CTL);
+ val &= ~mask;
+ val |= status ? mask : 0;
+ sti_mixer_reg_write(mixer, GAM_MIXER_CTL, val);
+
+ return 0;
+}
+
+void sti_mixer_set_matrix(struct sti_mixer *mixer)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(mixerColorSpaceMatIdentity); i++)
+ sti_mixer_reg_write(mixer, GAM_MIXER_MX0 + (i * 4),
+ mixerColorSpaceMatIdentity[i]);
+}
+
+struct sti_mixer *sti_mixer_create(struct device *dev, int id,
+ void __iomem *baseaddr)
+{
+ struct sti_mixer *mixer = devm_kzalloc(dev, sizeof(*mixer), GFP_KERNEL);
+ struct device_node *np = dev->of_node;
+
+ dev_dbg(dev, "%s\n", __func__);
+ if (!mixer) {
+ DRM_ERROR("Failed to allocated memory for mixer\n");
+ return NULL;
+ }
+ mixer->regs = baseaddr;
+ mixer->dev = dev;
+ mixer->id = id;
+
+ if (of_device_is_compatible(np, "st,stih416-compositor"))
+ sti_mixer_set_matrix(mixer);
+
+ DRM_DEBUG_DRIVER("%s created. Regs=%p\n",
+ sti_mixer_to_str(mixer), mixer->regs);
+
+ return mixer;
+}
diff --git a/drivers/gpu/drm/sti/sti_mixer.h b/drivers/gpu/drm/sti/sti_mixer.h
new file mode 100644
index 0000000..8743721
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_mixer.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ * Fabien Dessenne <fabien.dessenne@st.com>
+ * for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_MIXER_H_
+#define _STI_MIXER_H_
+
+#include <drm/drmP.h>
+
+#include "sti_layer.h"
+
+#define to_sti_mixer(x) container_of(x, struct sti_mixer, drm_crtc)
+
+/**
+ * STI Mixer subdevice structure
+ *
+ * @dev: driver device
+ * @regs: mixer registers
+ * @id: id of the mixer
+ * @drm_crtc: crtc object link to the mixer
+ * @pending_event: set if a flip event is pending on crtc
+ */
+struct sti_mixer {
+ struct device *dev;
+ void __iomem *regs;
+ int id;
+ struct drm_crtc drm_crtc;
+ struct drm_pending_vblank_event *pending_event;
+};
+
+const char *sti_mixer_to_str(struct sti_mixer *mixer);
+
+struct sti_mixer *sti_mixer_create(struct device *dev, int id,
+ void __iomem *baseaddr);
+
+int sti_mixer_set_layer_status(struct sti_mixer *mixer,
+ struct sti_layer *layer, bool status);
+int sti_mixer_set_layer_depth(struct sti_mixer *mixer, struct sti_layer *layer);
+int sti_mixer_active_video_area(struct sti_mixer *mixer,
+ struct drm_display_mode *mode);
+
+void sti_mixer_set_background_status(struct sti_mixer *mixer, bool enable);
+
+/* depth in Cross-bar control = z order */
+#define GAM_MIXER_NB_DEPTH_LEVEL 7
+
+#define STI_MIXER_MAIN 0
+#define STI_MIXER_AUX 1
+
+#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v8 10/11] drm: sti: add Compositor
2014-07-30 17:41 [PATCH v8 00/11] Add DRM for stih4xx platforms Benjamin Gaignard
` (8 preceding siblings ...)
2014-07-30 17:42 ` [PATCH v8 09/11] drm: sti: add Mixer Benjamin Gaignard
@ 2014-07-30 17:42 ` Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 11/11] drm: sti: Add DRM driver itself Benjamin Gaignard
10 siblings, 0 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-30 17:42 UTC (permalink / raw)
To: dri-devel, linaro-mm-sig, linux-kernel, airlied; +Cc: Benjamin Gaignard
Compositor control all the input sub-device (VID, GDP)
and the mixer(s).
It is the main entry point for composition.
Layer interface is used to control the abstracted layers.
Add debug in mixer and GDP.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
---
drivers/gpu/drm/sti/Kconfig | 1 +
drivers/gpu/drm/sti/Makefile | 4 +-
drivers/gpu/drm/sti/sti_compositor.c | 236 +++++++++++++++++++++++++++++++++++
drivers/gpu/drm/sti/sti_compositor.h | 90 +++++++++++++
drivers/gpu/drm/sti/sti_gdp.c | 33 +++++
drivers/gpu/drm/sti/sti_layer.c | 197 +++++++++++++++++++++++++++++
drivers/gpu/drm/sti/sti_mixer.c | 6 +
7 files changed, 566 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/sti/sti_compositor.c
create mode 100644 drivers/gpu/drm/sti/sti_compositor.h
create mode 100644 drivers/gpu/drm/sti/sti_layer.c
diff --git a/drivers/gpu/drm/sti/Kconfig b/drivers/gpu/drm/sti/Kconfig
index a18df02..11d372c 100644
--- a/drivers/gpu/drm/sti/Kconfig
+++ b/drivers/gpu/drm/sti/Kconfig
@@ -1,5 +1,6 @@
config DRM_STI
tristate "DRM Support for STMicroelectronics SoC stiH41x Series"
depends on DRM && (SOC_STIH415 || SOC_STIH416 || ARCH_MULTIPLATFORM)
+ select DRM_KMS_CMA_HELPER
help
Choose this option to enable DRM on STM stiH41x chipset
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
index 4a3a816..c5838f2 100644
--- a/drivers/gpu/drm/sti/Makefile
+++ b/drivers/gpu/drm/sti/Makefile
@@ -1,7 +1,9 @@
sticompositor-y := \
+ sti_layer.o \
sti_mixer.o \
sti_gdp.o \
- sti_vid.o
+ sti_vid.o \
+ sti_compositor.o
stihdmi-y := sti_hdmi.o \
sti_hdmi_tx3g0c55phy.o \
diff --git a/drivers/gpu/drm/sti/sti_compositor.c b/drivers/gpu/drm/sti/sti_compositor.c
new file mode 100644
index 0000000..a4164cf
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_compositor.c
@@ -0,0 +1,236 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ * Fabien Dessenne <fabien.dessenne@st.com>
+ * for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/component.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include <drm/drmP.h>
+
+#include "sti_compositor.h"
+#include "sti_gdp.h"
+#include "sti_vtg.h"
+
+/*
+ * stiH407 compositor properties
+ */
+struct sti_compositor_data stih407_compositor_data = {
+ .nb_subdev = 6,
+ .subdev_desc = {
+ {STI_GPD_SUBDEV, (int)STI_GDP_0, 0x100},
+ {STI_GPD_SUBDEV, (int)STI_GDP_1, 0x200},
+ {STI_GPD_SUBDEV, (int)STI_GDP_2, 0x300},
+ {STI_GPD_SUBDEV, (int)STI_GDP_3, 0x400},
+ {STI_VID_SUBDEV, (int)STI_VID_0, 0x700},
+ {STI_MIXER_MAIN_SUBDEV, STI_MIXER_MAIN, 0xC00}
+ },
+};
+
+/*
+ * stiH416 compositor properties
+ * Note:
+ * on stih416 MIXER_AUX has a different base address from MIXER_MAIN
+ * Moreover, GDPx is different for Main and Aux Mixer. So this subdev map does
+ * not fit for stiH416 if we want to enable the MIXER_AUX.
+ */
+struct sti_compositor_data stih416_compositor_data = {
+ .nb_subdev = 3,
+ .subdev_desc = {
+ {STI_GPD_SUBDEV, (int)STI_GDP_0, 0x100},
+ {STI_GPD_SUBDEV, (int)STI_GDP_1, 0x200},
+ {STI_MIXER_MAIN_SUBDEV, STI_MIXER_MAIN, 0xC00}
+ },
+};
+
+static int sti_compositor_init_subdev(struct sti_compositor *compo,
+ struct sti_compositor_subdev_descriptor *desc,
+ unsigned int array_size)
+{
+ unsigned int i, mixer_id = 0, layer_id = 0;
+
+ for (i = 0; i < array_size; i++) {
+ switch (desc[i].type) {
+ case STI_MIXER_MAIN_SUBDEV:
+ case STI_MIXER_AUX_SUBDEV:
+ compo->mixer[mixer_id++] =
+ sti_mixer_create(compo->dev, desc[i].id,
+ compo->regs + desc[i].offset);
+ break;
+ case STI_GPD_SUBDEV:
+ case STI_VID_SUBDEV:
+ compo->layer[layer_id++] =
+ sti_layer_create(compo->dev, desc[i].id,
+ compo->regs + desc[i].offset);
+ break;
+ /* case STI_CURSOR_SUBDEV : TODO */
+ default:
+ DRM_ERROR("Unknow subdev compoment type\n");
+ return 1;
+ }
+
+ }
+ compo->nb_mixers = mixer_id;
+ compo->nb_layers = layer_id;
+
+ return 0;
+}
+
+static int sti_compositor_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct sti_compositor *compo = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+ unsigned int i, crtc = 0, plane = 0;
+
+ drm_vblank_init(drm_dev, crtc);
+ /* Allow usage of vblank without having to call drm_irq_install */
+ drm_dev->irq_enabled = 1;
+
+
+ DRM_DEBUG_DRIVER("Initialized %d DRM CRTC(s) and %d DRM plane(s)\n",
+ crtc, plane);
+ DRM_DEBUG_DRIVER("DRM plane(s) for VID/VDP not created yet\n");
+
+ return 0;
+}
+
+static void sti_compositor_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ /* do nothing */
+}
+
+static const struct component_ops sti_compositor_ops = {
+ .bind = sti_compositor_bind,
+ .unbind = sti_compositor_unbind,
+};
+
+static const struct of_device_id compositor_of_match[] = {
+ {
+ .compatible = "st,stih416-compositor",
+ .data = &stih416_compositor_data,
+ }, {
+ .compatible = "st,stih407-compositor",
+ .data = &stih407_compositor_data,
+ }, {
+ /* end node */
+ }
+};
+MODULE_DEVICE_TABLE(of, compositor_of_match);
+
+static int sti_compositor_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *vtg_np;
+ struct sti_compositor *compo;
+ struct resource *res;
+ int err;
+
+ compo = devm_kzalloc(dev, sizeof(*compo), GFP_KERNEL);
+ if (!compo) {
+ DRM_ERROR("Failed to allocate compositor context\n");
+ return -ENOMEM;
+ }
+ compo->dev = dev;
+
+ /* populate data structure depending on compatibility */
+ BUG_ON(!of_match_node(compositor_of_match, np)->data);
+
+ memcpy(&compo->data, of_match_node(compositor_of_match, np)->data,
+ sizeof(struct sti_compositor_data));
+
+ /* Get Memory ressources */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ DRM_ERROR("Get memory resource failed\n");
+ return -ENXIO;
+ }
+ compo->regs = devm_ioremap(dev, res->start, resource_size(res));
+ if (compo->regs == NULL) {
+ DRM_ERROR("Register mapping failed\n");
+ return -ENXIO;
+ }
+
+ /* Get clock resources */
+ compo->clk_compo_main = devm_clk_get(dev, "compo_main");
+ if (IS_ERR(compo->clk_compo_main)) {
+ DRM_ERROR("Cannot get compo_main clock\n");
+ return PTR_ERR(compo->clk_compo_main);
+ }
+
+ compo->clk_compo_aux = devm_clk_get(dev, "compo_aux");
+ if (IS_ERR(compo->clk_compo_aux)) {
+ DRM_ERROR("Cannot get compo_aux clock\n");
+ return PTR_ERR(compo->clk_compo_aux);
+ }
+
+ compo->clk_pix_main = devm_clk_get(dev, "pix_main");
+ if (IS_ERR(compo->clk_pix_main)) {
+ DRM_ERROR("Cannot get pix_main clock\n");
+ return PTR_ERR(compo->clk_pix_main);
+ }
+
+ compo->clk_pix_aux = devm_clk_get(dev, "pix_aux");
+ if (IS_ERR(compo->clk_pix_aux)) {
+ DRM_ERROR("Cannot get pix_aux clock\n");
+ return PTR_ERR(compo->clk_pix_aux);
+ }
+
+ /* Get reset resources */
+ compo->rst_main = devm_reset_control_get(dev, "compo-main");
+ /* Take compo main out of reset */
+ if (!IS_ERR(compo->rst_main))
+ reset_control_deassert(compo->rst_main);
+
+ compo->rst_aux = devm_reset_control_get(dev, "compo-aux");
+ /* Take compo aux out of reset */
+ if (!IS_ERR(compo->rst_aux))
+ reset_control_deassert(compo->rst_aux);
+
+ vtg_np = of_parse_phandle(pdev->dev.of_node, "st,vtg", 0);
+ if (vtg_np)
+ compo->vtg_main = of_vtg_find(vtg_np);
+
+ vtg_np = of_parse_phandle(pdev->dev.of_node, "st,vtg", 1);
+ if (vtg_np)
+ compo->vtg_aux = of_vtg_find(vtg_np);
+
+ /* Initialize compositor subdevices */
+ err = sti_compositor_init_subdev(compo, compo->data.subdev_desc,
+ compo->data.nb_subdev);
+ if (err)
+ return err;
+
+ platform_set_drvdata(pdev, compo);
+
+ return component_add(&pdev->dev, &sti_compositor_ops);
+}
+
+static int sti_compositor_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &sti_compositor_ops);
+ return 0;
+}
+
+static struct platform_driver sti_compositor_driver = {
+ .driver = {
+ .name = "sti-compositor",
+ .owner = THIS_MODULE,
+ .of_match_table = compositor_of_match,
+ },
+ .probe = sti_compositor_probe,
+ .remove = sti_compositor_remove,
+};
+
+module_platform_driver(sti_compositor_driver);
+
+MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/sti/sti_compositor.h b/drivers/gpu/drm/sti/sti_compositor.h
new file mode 100644
index 0000000..3ea19db
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_compositor.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ * Fabien Dessenne <fabien.dessenne@st.com>
+ * for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_COMPOSITOR_H_
+#define _STI_COMPOSITOR_H_
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+
+#include "sti_layer.h"
+#include "sti_mixer.h"
+
+#define WAIT_NEXT_VSYNC_MS 50 /*ms*/
+
+#define STI_MAX_LAYER 8
+#define STI_MAX_MIXER 2
+
+enum sti_compositor_subdev_type {
+ STI_MIXER_MAIN_SUBDEV,
+ STI_MIXER_AUX_SUBDEV,
+ STI_GPD_SUBDEV,
+ STI_VID_SUBDEV,
+ STI_CURSOR_SUBDEV,
+};
+
+struct sti_compositor_subdev_descriptor {
+ enum sti_compositor_subdev_type type;
+ int id;
+ unsigned int offset;
+};
+
+/**
+ * STI Compositor data structure
+ *
+ * @nb_subdev: number of subdevices supported by the compositor
+ * @subdev_desc: subdev list description
+ */
+#define MAX_SUBDEV 9
+struct sti_compositor_data {
+ unsigned int nb_subdev;
+ struct sti_compositor_subdev_descriptor subdev_desc[MAX_SUBDEV];
+};
+
+/**
+ * STI Compositor structure
+ *
+ * @dev: driver device
+ * @regs: registers (main)
+ * @data: device data
+ * @clk_compo_main: clock for main compo
+ * @clk_compo_aux: clock for aux compo
+ * @clk_pix_main: pixel clock for main path
+ * @clk_pix_aux: pixel clock for aux path
+ * @rst_main: reset control of the main path
+ * @rst_aux: reset control of the aux path
+ * @mixer: array of mixers
+ * @vtg_main: vtg for main data path
+ * @vtg_aux: vtg for auxillary data path
+ * @layer: array of layers
+ * @nb_mixers: number of mixers for this compositor
+ * @nb_layers: number of layers (GDP,VID,...) for this compositor
+ * @enable: true if compositor is enable else false
+ * @vtg_vblank_nb: callback for VTG VSYNC notification
+ */
+struct sti_compositor {
+ struct device *dev;
+ void __iomem *regs;
+ struct sti_compositor_data data;
+ struct clk *clk_compo_main;
+ struct clk *clk_compo_aux;
+ struct clk *clk_pix_main;
+ struct clk *clk_pix_aux;
+ struct reset_control *rst_main;
+ struct reset_control *rst_aux;
+ struct sti_mixer *mixer[STI_MAX_MIXER];
+ struct sti_vtg *vtg_main;
+ struct sti_vtg *vtg_aux;
+ struct sti_layer *layer[STI_MAX_LAYER];
+ int nb_mixers;
+ int nb_layers;
+ bool enable;
+ struct notifier_block vtg_vblank_nb;
+};
+
+#endif
diff --git a/drivers/gpu/drm/sti/sti_gdp.c b/drivers/gpu/drm/sti/sti_gdp.c
index 7f55767..4e30b74 100644
--- a/drivers/gpu/drm/sti/sti_gdp.c
+++ b/drivers/gpu/drm/sti/sti_gdp.c
@@ -9,6 +9,7 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
+#include "sti_compositor.h"
#include "sti_gdp.h"
#include "sti_layer.h"
#include "sti_vtg.h"
@@ -182,6 +183,10 @@ static struct sti_gdp_node_list *sti_gdp_get_free_nodes(struct sti_layer *layer)
(virt_nvn != gdp->node_list[i].top_field))
return &gdp->node_list[i];
+ /* in hazardious cases restart with the first node */
+ DRM_ERROR("inconsistent NVN for %s: 0x%08X\n",
+ sti_layer_to_str(layer), hw_nvn);
+
end:
return &gdp->node_list[0];
}
@@ -215,6 +220,9 @@ struct sti_gdp_node_list *sti_gdp_get_current_nodes(struct sti_layer *layer)
return &gdp->node_list[i];
end:
+ DRM_DEBUG_DRIVER("Warning, NVN 0x%08X for %s does not match any node\n",
+ hw_nvn, sti_layer_to_str(layer));
+
return NULL;
}
@@ -235,6 +243,7 @@ static int sti_gdp_prepare_layer(struct sti_layer *layer, bool first_prepare)
struct drm_display_mode *mode = layer->mode;
struct device *dev = layer->dev;
struct sti_gdp *gdp = to_sti_gdp(layer);
+ struct sti_compositor *compo = dev_get_drvdata(dev);
int format;
unsigned int depth, bpp;
int rate = mode->clock * 1000;
@@ -245,6 +254,9 @@ static int sti_gdp_prepare_layer(struct sti_layer *layer, bool first_prepare)
top_field = list->top_field;
btm_field = list->btm_field;
+ dev_dbg(dev, "%s %s top_node:0x%p btm_node:0x%p\n", __func__,
+ sti_layer_to_str(layer), top_field, btm_field);
+
/* Build the top field from layer params */
top_field->gam_gdp_agc = GAM_GDP_AGC_FULL_RANGE;
top_field->gam_gdp_ctl = WAIT_NEXT_VSYNC;
@@ -289,6 +301,14 @@ static int sti_gdp_prepare_layer(struct sti_layer *layer, bool first_prepare)
layer->pitches[0];
if (first_prepare) {
+ /* Register gdp callback */
+ if (sti_vtg_register_client(layer->mixer_id == STI_MIXER_MAIN ?
+ compo->vtg_main : compo->vtg_aux,
+ &gdp->vtg_field_nb, layer->mixer_id)) {
+ DRM_ERROR("Cannot register VTG notifier\n");
+ return 1;
+ }
+
/* Set and enable gdp clock */
if (gdp->clk_pix) {
res = clk_set_rate(gdp->clk_pix, rate);
@@ -333,6 +353,9 @@ static int sti_gdp_commit_layer(struct sti_layer *layer)
u32 dma_updated_btm = virt_to_dma(layer->dev, updated_btm_node);
struct sti_gdp_node_list *curr_list = sti_gdp_get_current_nodes(layer);
+ dev_dbg(layer->dev, "%s %s top/btm_node:0x%p/0x%p\n", __func__,
+ sti_layer_to_str(layer),
+ updated_top_node, updated_btm_node);
dev_dbg(layer->dev, "Current NVN:0x%X\n",
readl(layer->regs + GAM_GDP_NVN_OFFSET));
dev_dbg(layer->dev, "Posted buff: %lx current buff: %x\n",
@@ -342,6 +365,9 @@ static int sti_gdp_commit_layer(struct sti_layer *layer)
if (curr_list == NULL) {
/* First update or invalid node should directly write in the
* hw register */
+ DRM_DEBUG_DRIVER("%s first update (or invalid node)",
+ sti_layer_to_str(layer));
+
writel(gdp->is_curr_top == true ?
dma_updated_btm : dma_updated_top,
layer->regs + GAM_GDP_NVN_OFFSET);
@@ -380,6 +406,9 @@ static int sti_gdp_disable_layer(struct sti_layer *layer)
{
unsigned int i;
struct sti_gdp *gdp = to_sti_gdp(layer);
+ struct sti_compositor *compo = dev_get_drvdata(layer->dev);
+
+ DRM_DEBUG_DRIVER("%s\n", sti_layer_to_str(layer));
/* Set the nodes as 'to be ignored on mixer' */
for (i = 0; i < GDP_NODE_NB_BANK; i++) {
@@ -387,6 +416,10 @@ static int sti_gdp_disable_layer(struct sti_layer *layer)
gdp->node_list[i].btm_field->gam_gdp_ppt |= GAM_GDP_PPT_IGNORE;
}
+ if (sti_vtg_unregister_client(layer->mixer_id == STI_MIXER_MAIN ?
+ compo->vtg_main : compo->vtg_aux, &gdp->vtg_field_nb))
+ DRM_DEBUG_DRIVER("Warning: cannot unregister VTG notifier\n");
+
if (gdp->clk_pix)
clk_disable_unprepare(gdp->clk_pix);
diff --git a/drivers/gpu/drm/sti/sti_layer.c b/drivers/gpu/drm/sti/sti_layer.c
new file mode 100644
index 0000000..06a587c
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_layer.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ * Fabien Dessenne <fabien.dessenne@st.com>
+ * for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+
+#include "sti_compositor.h"
+#include "sti_gdp.h"
+#include "sti_layer.h"
+#include "sti_vid.h"
+
+const char *sti_layer_to_str(struct sti_layer *layer)
+{
+ switch (layer->desc) {
+ case STI_GDP_0:
+ return "GDP0";
+ case STI_GDP_1:
+ return "GDP1";
+ case STI_GDP_2:
+ return "GDP2";
+ case STI_GDP_3:
+ return "GDP3";
+ case STI_VID_0:
+ return "VID0";
+ case STI_VID_1:
+ return "VID1";
+ case STI_CURSOR:
+ return "CURSOR";
+ default:
+ return "<UNKNOWN LAYER>";
+ }
+}
+
+struct sti_layer *sti_layer_create(struct device *dev, int desc,
+ void __iomem *baseaddr)
+{
+
+ struct sti_layer *layer = NULL;
+
+ switch (desc & STI_LAYER_TYPE_MASK) {
+ case STI_GDP:
+ layer = sti_gdp_create(dev, desc);
+ break;
+ case STI_VID:
+ layer = sti_vid_create(dev);
+ break;
+ }
+
+ if (!layer) {
+ DRM_ERROR("Failed to create layer\n");
+ return NULL;
+ }
+
+ layer->desc = desc;
+ layer->dev = dev;
+ layer->regs = baseaddr;
+
+ layer->ops->init(layer);
+
+ DRM_DEBUG_DRIVER("%s created\n", sti_layer_to_str(layer));
+
+ return layer;
+}
+
+int sti_layer_prepare(struct sti_layer *layer, struct drm_framebuffer *fb,
+ struct drm_display_mode *mode, int mixer_id,
+ int dest_x, int dest_y, int dest_w, int dest_h,
+ int src_x, int src_y, int src_w, int src_h)
+{
+ int ret;
+ unsigned int i;
+ struct drm_gem_cma_object *cma_obj;
+
+ if (!layer || !fb || !mode) {
+ DRM_ERROR("Null fb, layer or mode\n");
+ return 1;
+ }
+
+ cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
+ if (!cma_obj) {
+ DRM_ERROR("Can't get CMA GEM object for fb\n");
+ return 1;
+ }
+
+ layer->fb = fb;
+ layer->mode = mode;
+ layer->mixer_id = mixer_id;
+ layer->dst_x = dest_x;
+ layer->dst_y = dest_y;
+ layer->dst_w = clamp_val(dest_w, 0, mode->crtc_hdisplay - dest_x);
+ layer->dst_h = clamp_val(dest_h, 0, mode->crtc_vdisplay - dest_y);
+ layer->src_x = src_x;
+ layer->src_y = src_y;
+ layer->src_w = src_w;
+ layer->src_h = src_h;
+ layer->format = fb->pixel_format;
+ layer->paddr = cma_obj->paddr;
+ for (i = 0; i < 4; i++) {
+ layer->pitches[i] = fb->pitches[i];
+ layer->offsets[i] = fb->offsets[i];
+ }
+
+ DRM_DEBUG_DRIVER("%s is associated with mixer_id %d\n",
+ sti_layer_to_str(layer),
+ layer->mixer_id);
+ DRM_DEBUG_DRIVER("%s dst=(%dx%d)@(%d,%d) - src=(%dx%d)@(%d,%d)\n",
+ sti_layer_to_str(layer),
+ layer->dst_w, layer->dst_h, layer->dst_x, layer->dst_y,
+ layer->src_w, layer->src_h, layer->src_x,
+ layer->src_y);
+
+ DRM_DEBUG_DRIVER("drm FB:%d format:%.4s phys@:0x%lx\n", fb->base.id,
+ (char *)&layer->format, (unsigned long)layer->paddr);
+
+ if (!layer->ops->prepare)
+ goto err_no_prepare;
+
+ ret = layer->ops->prepare(layer, !layer->enabled);
+ if (!ret)
+ layer->enabled = true;
+
+ return ret;
+
+err_no_prepare:
+ DRM_ERROR("Cannot prepare\n");
+ return 1;
+}
+
+int sti_layer_commit(struct sti_layer *layer)
+{
+ if (!layer)
+ return 1;
+
+ if (!layer->ops->commit)
+ goto err_no_commit;
+
+ return layer->ops->commit(layer);
+
+err_no_commit:
+ DRM_ERROR("Cannot commit\n");
+ return 1;
+}
+
+int sti_layer_disable(struct sti_layer *layer)
+{
+ int ret;
+
+ DRM_DEBUG_DRIVER("%s\n", sti_layer_to_str(layer));
+ if (!layer)
+ return 1;
+
+ if (!layer->enabled)
+ return 0;
+
+ if (!layer->ops->disable)
+ goto err_no_disable;
+
+ ret = layer->ops->disable(layer);
+ if (!ret)
+ layer->enabled = false;
+ else
+ DRM_ERROR("Disable failed\n");
+
+ return ret;
+
+err_no_disable:
+ DRM_ERROR("Cannot disable\n");
+ return 1;
+}
+
+const uint32_t *sti_layer_get_formats(struct sti_layer *layer)
+{
+ if (!layer)
+ return NULL;
+
+ if (!layer->ops->get_formats)
+ return NULL;
+
+ return layer->ops->get_formats(layer);
+}
+
+unsigned int sti_layer_get_nb_formats(struct sti_layer *layer)
+{
+ if (!layer)
+ return 0;
+
+ if (!layer->ops->get_nb_formats)
+ return 0;
+
+ return layer->ops->get_nb_formats(layer);
+}
diff --git a/drivers/gpu/drm/sti/sti_mixer.c b/drivers/gpu/drm/sti/sti_mixer.c
index 5fa6dc5..79f369d 100644
--- a/drivers/gpu/drm/sti/sti_mixer.c
+++ b/drivers/gpu/drm/sti/sti_mixer.c
@@ -6,6 +6,7 @@
* License terms: GNU General Public License (GPL), version 2
*/
+#include "sti_compositor.h"
#include "sti_mixer.h"
#include "sti_vtg.h"
@@ -133,6 +134,8 @@ int sti_mixer_set_layer_depth(struct sti_mixer *mixer, struct sti_layer *layer)
mask = GAM_DEPTH_MASK_ID << (3 * depth);
layer_id = layer_id << (3 * depth);
+ DRM_DEBUG_DRIVER("%s %s depth=%d\n", sti_mixer_to_str(mixer),
+ sti_layer_to_str(layer), depth);
dev_dbg(mixer->dev, "GAM_MIXER_CRB val 0x%x mask 0x%x\n",
layer_id, mask);
@@ -195,6 +198,9 @@ int sti_mixer_set_layer_status(struct sti_mixer *mixer,
{
u32 mask, val;
+ DRM_DEBUG_DRIVER("%s %s %s\n", status ? "enable" : "disable",
+ sti_mixer_to_str(mixer), sti_layer_to_str(layer));
+
mask = sti_mixer_get_layer_mask(layer);
if (!mask) {
DRM_ERROR("Can not find layer mask\n");
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v8 11/11] drm: sti: Add DRM driver itself
2014-07-30 17:41 [PATCH v8 00/11] Add DRM for stih4xx platforms Benjamin Gaignard
` (9 preceding siblings ...)
2014-07-30 17:42 ` [PATCH v8 10/11] drm: sti: add Compositor Benjamin Gaignard
@ 2014-07-30 17:42 ` Benjamin Gaignard
2014-07-30 19:48 ` Daniel Vetter
2016-04-22 13:27 ` Daniel Vetter
10 siblings, 2 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-30 17:42 UTC (permalink / raw)
To: dri-devel, linaro-mm-sig, linux-kernel, airlied; +Cc: Benjamin Gaignard
Make the link between all the hardware drivers and DRM/KMS interface.
Create the driver itself and make it register all the sub-components.
Use GEM CMA helpers for buffer allocation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
---
drivers/gpu/drm/sti/Kconfig | 8 +
drivers/gpu/drm/sti/Makefile | 7 +-
drivers/gpu/drm/sti/sti_compositor.c | 43 ++++
drivers/gpu/drm/sti/sti_drm_crtc.c | 423 +++++++++++++++++++++++++++++++++++
drivers/gpu/drm/sti/sti_drm_crtc.h | 22 ++
drivers/gpu/drm/sti/sti_drm_drv.c | 241 ++++++++++++++++++++
drivers/gpu/drm/sti/sti_drm_drv.h | 29 +++
drivers/gpu/drm/sti/sti_drm_plane.c | 195 ++++++++++++++++
drivers/gpu/drm/sti/sti_drm_plane.h | 18 ++
9 files changed, 984 insertions(+), 2 deletions(-)
create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.c
create mode 100644 drivers/gpu/drm/sti/sti_drm_crtc.h
create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.c
create mode 100644 drivers/gpu/drm/sti/sti_drm_drv.h
create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.c
create mode 100644 drivers/gpu/drm/sti/sti_drm_plane.h
diff --git a/drivers/gpu/drm/sti/Kconfig b/drivers/gpu/drm/sti/Kconfig
index 11d372c..2d9d425 100644
--- a/drivers/gpu/drm/sti/Kconfig
+++ b/drivers/gpu/drm/sti/Kconfig
@@ -1,6 +1,14 @@
config DRM_STI
tristate "DRM Support for STMicroelectronics SoC stiH41x Series"
depends on DRM && (SOC_STIH415 || SOC_STIH416 || ARCH_MULTIPLATFORM)
+ select DRM_KMS_HELPER
+ select DRM_GEM_CMA_HELPER
select DRM_KMS_CMA_HELPER
help
Choose this option to enable DRM on STM stiH41x chipset
+
+config DRM_STI_FBDEV
+ bool "DRM frame buffer device for STMicroelectronics SoC stiH41x Serie"
+ depends on DRM_STI
+ help
+ Choose this option to enable FBDEV on top of DRM for STM stiH41x chipset
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
index c5838f2..04ac2ce 100644
--- a/drivers/gpu/drm/sti/Makefile
+++ b/drivers/gpu/drm/sti/Makefile
@@ -3,7 +3,9 @@ sticompositor-y := \
sti_mixer.o \
sti_gdp.o \
sti_vid.o \
- sti_compositor.o
+ sti_compositor.o \
+ sti_drm_crtc.o \
+ sti_drm_plane.o
stihdmi-y := sti_hdmi.o \
sti_hdmi_tx3g0c55phy.o \
@@ -15,4 +17,5 @@ obj-$(CONFIG_DRM_STI) = \
stihdmi.o \
sti_hda.o \
sti_tvout.o \
- sticompositor.o
\ No newline at end of file
+ sticompositor.o \
+ sti_drm_drv.o
\ No newline at end of file
diff --git a/drivers/gpu/drm/sti/sti_compositor.c b/drivers/gpu/drm/sti/sti_compositor.c
index a4164cf..9efd017 100644
--- a/drivers/gpu/drm/sti/sti_compositor.c
+++ b/drivers/gpu/drm/sti/sti_compositor.c
@@ -14,6 +14,9 @@
#include <drm/drmP.h>
#include "sti_compositor.h"
+#include "sti_drm_crtc.h"
+#include "sti_drm_drv.h"
+#include "sti_drm_plane.h"
#include "sti_gdp.h"
#include "sti_vtg.h"
@@ -87,11 +90,50 @@ static int sti_compositor_bind(struct device *dev, struct device *master,
struct sti_compositor *compo = dev_get_drvdata(dev);
struct drm_device *drm_dev = data;
unsigned int i, crtc = 0, plane = 0;
+ struct sti_drm_private *dev_priv = drm_dev->dev_private;
+ struct drm_plane *cursor = NULL;
+ struct drm_plane *primary = NULL;
+
+ dev_priv->compo = compo;
drm_vblank_init(drm_dev, crtc);
/* Allow usage of vblank without having to call drm_irq_install */
drm_dev->irq_enabled = 1;
+ for (i = 0; i < compo->nb_layers; i++) {
+ if (compo->layer[i]) {
+ enum sti_layer_desc desc = compo->layer[i]->desc;
+ enum sti_layer_type type = desc & STI_LAYER_TYPE_MASK;
+ enum drm_plane_type plane_type = DRM_PLANE_TYPE_OVERLAY;
+
+ if (compo->mixer[crtc])
+ plane_type = DRM_PLANE_TYPE_PRIMARY;
+
+ switch (type) {
+ case STI_CUR:
+ cursor = sti_drm_plane_init(drm_dev,
+ compo->layer[i],
+ (1 << crtc) - 1,
+ DRM_PLANE_TYPE_CURSOR);
+ break;
+ case STI_GDP:
+ case STI_VID:
+ primary = sti_drm_plane_init(drm_dev,
+ compo->layer[i],
+ (1 << crtc) - 1, plane_type);
+ plane++;
+ break;
+ }
+
+ /* The first planes are reserved for primary planes*/
+ if (compo->mixer[crtc]) {
+ sti_drm_crtc_init(drm_dev, compo->mixer[crtc],
+ primary, cursor);
+ crtc++;
+ cursor = NULL;
+ }
+ }
+ }
DRM_DEBUG_DRIVER("Initialized %d DRM CRTC(s) and %d DRM plane(s)\n",
crtc, plane);
@@ -139,6 +181,7 @@ static int sti_compositor_probe(struct platform_device *pdev)
return -ENOMEM;
}
compo->dev = dev;
+ compo->vtg_vblank_nb.notifier_call = sti_drm_crtc_vblank_cb;
/* populate data structure depending on compatibility */
BUG_ON(!of_match_node(compositor_of_match, np)->data);
diff --git a/drivers/gpu/drm/sti/sti_drm_crtc.c b/drivers/gpu/drm/sti/sti_drm_crtc.c
new file mode 100644
index 0000000..6eba648
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_drm_crtc.c
@@ -0,0 +1,423 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ * Fabien Dessenne <fabien.dessenne@st.com>
+ * for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/clk.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+
+#include "sti_compositor.h"
+#include "sti_drm_drv.h"
+#include "sti_drm_crtc.h"
+#include "sti_vtg.h"
+
+static void sti_drm_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ DRM_DEBUG_KMS("\n");
+}
+
+static void sti_drm_crtc_prepare(struct drm_crtc *crtc)
+{
+ struct sti_mixer *mixer = to_sti_mixer(crtc);
+ struct device *dev = mixer->dev;
+ struct sti_compositor *compo = dev_get_drvdata(dev);
+
+ compo->enable = true;
+
+ /* Prepare and enable the compo IP clock */
+ if (mixer->id == STI_MIXER_MAIN) {
+ if (clk_prepare_enable(compo->clk_compo_main))
+ DRM_INFO("Failed to prepare/enable compo_main clk\n");
+ } else {
+ if (clk_prepare_enable(compo->clk_compo_aux))
+ DRM_INFO("Failed to prepare/enable compo_aux clk\n");
+ }
+}
+
+static void sti_drm_crtc_commit(struct drm_crtc *crtc)
+{
+ struct sti_mixer *mixer = to_sti_mixer(crtc);
+ struct device *dev = mixer->dev;
+ struct sti_compositor *compo = dev_get_drvdata(dev);
+ struct sti_layer *layer;
+
+ if ((!mixer || !compo)) {
+ DRM_ERROR("Can not find mixer or compositor)\n");
+ return;
+ }
+
+ /* get GDP which is reserved to the CRTC FB */
+ layer = to_sti_layer(crtc->primary);
+ if (layer)
+ sti_layer_commit(layer);
+ else
+ DRM_ERROR("Can not find CRTC dedicated plane (GDP0)\n");
+
+ /* Enable layer on mixer */
+ if (sti_mixer_set_layer_status(mixer, layer, true))
+ DRM_ERROR("Can not enable layer at mixer\n");
+}
+
+static bool sti_drm_crtc_mode_fixup(struct drm_crtc *crtc,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ /* accept the provided drm_display_mode, do not fix it up */
+ return true;
+}
+
+static int
+sti_drm_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct sti_mixer *mixer = to_sti_mixer(crtc);
+ struct device *dev = mixer->dev;
+ struct sti_compositor *compo = dev_get_drvdata(dev);
+ struct sti_layer *layer;
+ struct clk *clk;
+ int rate = mode->clock * 1000;
+ int res;
+ unsigned int w, h;
+
+ DRM_DEBUG_KMS("CRTC:%d (%s) fb:%d mode:%d (%s)\n",
+ crtc->base.id, sti_mixer_to_str(mixer),
+ crtc->primary->fb->base.id, mode->base.id, mode->name);
+
+ DRM_DEBUG_KMS("%d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n",
+ mode->vrefresh, mode->clock,
+ mode->hdisplay,
+ mode->hsync_start, mode->hsync_end,
+ mode->htotal,
+ mode->vdisplay,
+ mode->vsync_start, mode->vsync_end,
+ mode->vtotal, mode->type, mode->flags);
+
+ /* Set rate and prepare/enable pixel clock */
+ if (mixer->id == STI_MIXER_MAIN)
+ clk = compo->clk_pix_main;
+ else
+ clk = compo->clk_pix_aux;
+
+ res = clk_set_rate(clk, rate);
+ if (res < 0) {
+ DRM_ERROR("Cannot set rate (%dHz) for pix clk\n", rate);
+ return -EINVAL;
+ }
+ if (clk_prepare_enable(clk)) {
+ DRM_ERROR("Failed to prepare/enable pix clk\n");
+ return -EINVAL;
+ }
+
+ sti_vtg_set_config(mixer->id == STI_MIXER_MAIN ?
+ compo->vtg_main : compo->vtg_aux, &crtc->mode);
+
+ /* a GDP is reserved to the CRTC FB */
+ layer = to_sti_layer(crtc->primary);
+ if (!layer) {
+ DRM_ERROR("Can not find GDP0)\n");
+ return -EINVAL;
+ }
+
+ /* copy the mode data adjusted by mode_fixup() into crtc->mode
+ * so that hardware can be set to proper mode
+ */
+ memcpy(&crtc->mode, adjusted_mode, sizeof(*adjusted_mode));
+
+ res = sti_mixer_set_layer_depth(mixer, layer);
+ if (res) {
+ DRM_ERROR("Can not set layer depth\n");
+ return -EINVAL;
+ }
+ res = sti_mixer_active_video_area(mixer, &crtc->mode);
+ if (res) {
+ DRM_ERROR("Can not set active video area\n");
+ return -EINVAL;
+ }
+
+ w = crtc->primary->fb->width - x;
+ h = crtc->primary->fb->height - y;
+
+ return sti_layer_prepare(layer, crtc->primary->fb, &crtc->mode,
+ mixer->id, 0, 0, w, h, x, y, w, h);
+}
+
+static int sti_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct sti_mixer *mixer = to_sti_mixer(crtc);
+ struct device *dev = mixer->dev;
+ struct sti_compositor *compo = dev_get_drvdata(dev);
+ struct sti_layer *layer;
+ unsigned int w, h;
+ int ret;
+
+ DRM_DEBUG_KMS("CRTC:%d (%s) fb:%d (%d,%d)\n",
+ crtc->base.id, sti_mixer_to_str(mixer),
+ crtc->primary->fb->base.id, x, y);
+
+ /* GDP is reserved to the CRTC FB */
+ layer = to_sti_layer(crtc->primary);
+ if (!layer) {
+ DRM_ERROR("Can not find GDP0)\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ w = crtc->primary->fb->width - crtc->x;
+ h = crtc->primary->fb->height - crtc->y;
+
+ ret = sti_layer_prepare(layer, crtc->primary->fb, &crtc->mode,
+ mixer->id, 0, 0, w, h,
+ crtc->x, crtc->y, w, h);
+ if (ret) {
+ DRM_ERROR("Can not prepare layer\n");
+ goto out;
+ }
+
+ sti_drm_crtc_commit(crtc);
+out:
+ return ret;
+}
+
+static void sti_drm_crtc_load_lut(struct drm_crtc *crtc)
+{
+ /* do nothing */
+}
+
+static void sti_drm_crtc_disable(struct drm_crtc *crtc)
+{
+ struct sti_mixer *mixer = to_sti_mixer(crtc);
+ struct device *dev = mixer->dev;
+ struct sti_compositor *compo = dev_get_drvdata(dev);
+ struct sti_layer *layer;
+
+ if (!compo->enable)
+ return;
+
+ DRM_DEBUG_KMS("CRTC:%d (%s)\n", crtc->base.id, sti_mixer_to_str(mixer));
+
+ /* Disable Background */
+ sti_mixer_set_background_status(mixer, false);
+
+ /* Disable GDP */
+ layer = to_sti_layer(crtc->primary);
+ if (!layer) {
+ DRM_ERROR("Cannot find GDP0\n");
+ return;
+ }
+
+ /* Disable layer at mixer level */
+ if (sti_mixer_set_layer_status(mixer, layer, false))
+ DRM_ERROR("Can not disable %s layer at mixer\n",
+ sti_layer_to_str(layer));
+
+ /* Wait a while to be sure that a Vsync event is received */
+ msleep(WAIT_NEXT_VSYNC_MS);
+
+ /* Then disable layer itself */
+ sti_layer_disable(layer);
+
+ drm_vblank_off(crtc->dev, mixer->id);
+
+ /* Disable pixel clock and compo IP clocks */
+ if (mixer->id == STI_MIXER_MAIN) {
+ clk_disable_unprepare(compo->clk_pix_main);
+ clk_disable_unprepare(compo->clk_compo_main);
+ } else {
+ clk_disable_unprepare(compo->clk_pix_aux);
+ clk_disable_unprepare(compo->clk_compo_aux);
+ }
+
+ compo->enable = false;
+}
+
+static struct drm_crtc_helper_funcs sti_crtc_helper_funcs = {
+ .dpms = sti_drm_crtc_dpms,
+ .prepare = sti_drm_crtc_prepare,
+ .commit = sti_drm_crtc_commit,
+ .mode_fixup = sti_drm_crtc_mode_fixup,
+ .mode_set = sti_drm_crtc_mode_set,
+ .mode_set_base = sti_drm_crtc_mode_set_base,
+ .load_lut = sti_drm_crtc_load_lut,
+ .disable = sti_drm_crtc_disable,
+};
+
+static int sti_drm_crtc_page_flip(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_pending_vblank_event *event,
+ uint32_t page_flip_flags)
+{
+ struct drm_device *drm_dev = crtc->dev;
+ struct drm_framebuffer *old_fb;
+ struct sti_mixer *mixer = to_sti_mixer(crtc);
+ unsigned long flags;
+ int ret;
+
+ DRM_DEBUG_KMS("fb %d --> fb %d\n",
+ crtc->primary->fb->base.id, fb->base.id);
+
+ mutex_lock(&drm_dev->struct_mutex);
+
+ old_fb = crtc->primary->fb;
+ crtc->primary->fb = fb;
+ ret = sti_drm_crtc_mode_set_base(crtc, crtc->x, crtc->y, old_fb);
+ if (ret) {
+ DRM_ERROR("failed\n");
+ crtc->primary->fb = old_fb;
+ goto out;
+ }
+
+ if (event) {
+ event->pipe = mixer->id;
+
+ ret = drm_vblank_get(drm_dev, event->pipe);
+ if (ret) {
+ DRM_ERROR("Cannot get vblank\n");
+ goto out;
+ }
+
+ spin_lock_irqsave(&drm_dev->event_lock, flags);
+ if (mixer->pending_event) {
+ drm_vblank_put(drm_dev, event->pipe);
+ ret = -EBUSY;
+ } else {
+ mixer->pending_event = event;
+ }
+ spin_unlock_irqrestore(&drm_dev->event_lock, flags);
+ }
+out:
+ mutex_unlock(&drm_dev->struct_mutex);
+ return ret;
+}
+
+static void sti_drm_crtc_destroy(struct drm_crtc *crtc)
+{
+ DRM_DEBUG_KMS("\n");
+ drm_crtc_cleanup(crtc);
+}
+
+static int sti_drm_crtc_set_property(struct drm_crtc *crtc,
+ struct drm_property *property,
+ uint64_t val)
+{
+ DRM_DEBUG_KMS("\n");
+ return 0;
+}
+
+int sti_drm_crtc_vblank_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct drm_device *drm_dev;
+ struct sti_compositor *compo =
+ container_of(nb, struct sti_compositor, vtg_vblank_nb);
+ int *crtc = data;
+ unsigned long flags;
+ struct sti_drm_private *priv;
+
+ drm_dev = compo->mixer[*crtc]->drm_crtc.dev;
+ priv = drm_dev->dev_private;
+
+ if ((event != VTG_TOP_FIELD_EVENT) &&
+ (event != VTG_BOTTOM_FIELD_EVENT)) {
+ DRM_ERROR("unknown event: %lu\n", event);
+ return -EINVAL;
+ }
+
+ drm_handle_vblank(drm_dev, *crtc);
+
+ spin_lock_irqsave(&drm_dev->event_lock, flags);
+ if (compo->mixer[*crtc]->pending_event) {
+ drm_send_vblank_event(drm_dev, -1,
+ compo->mixer[*crtc]->pending_event);
+ drm_vblank_put(drm_dev, *crtc);
+ compo->mixer[*crtc]->pending_event = NULL;
+ }
+ spin_unlock_irqrestore(&drm_dev->event_lock, flags);
+
+ return 0;
+}
+
+int sti_drm_crtc_enable_vblank(struct drm_device *dev, int crtc)
+{
+ struct sti_drm_private *dev_priv = dev->dev_private;
+ struct sti_compositor *compo = dev_priv->compo;
+ struct notifier_block *vtg_vblank_nb = &compo->vtg_vblank_nb;
+
+ if (sti_vtg_register_client(crtc == STI_MIXER_MAIN ?
+ compo->vtg_main : compo->vtg_aux,
+ vtg_vblank_nb, crtc)) {
+ DRM_ERROR("Cannot register VTG notifier\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(sti_drm_crtc_enable_vblank);
+
+void sti_drm_crtc_disable_vblank(struct drm_device *dev, int crtc)
+{
+ struct sti_drm_private *priv = dev->dev_private;
+ struct sti_compositor *compo = priv->compo;
+ struct notifier_block *vtg_vblank_nb = &compo->vtg_vblank_nb;
+ unsigned long flags;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ if (sti_vtg_unregister_client(crtc == STI_MIXER_MAIN ?
+ compo->vtg_main : compo->vtg_aux, vtg_vblank_nb))
+ DRM_DEBUG_DRIVER("Warning: cannot unregister VTG notifier\n");
+
+ /* free the resources of the pending requests */
+ spin_lock_irqsave(&dev->event_lock, flags);
+ if (compo->mixer[crtc]->pending_event) {
+ drm_vblank_put(dev, crtc);
+ compo->mixer[crtc]->pending_event = NULL;
+ }
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+
+}
+EXPORT_SYMBOL(sti_drm_crtc_disable_vblank);
+
+static struct drm_crtc_funcs sti_crtc_funcs = {
+ .set_config = drm_crtc_helper_set_config,
+ .page_flip = sti_drm_crtc_page_flip,
+ .destroy = sti_drm_crtc_destroy,
+ .set_property = sti_drm_crtc_set_property,
+};
+
+bool sti_drm_crtc_is_main(struct drm_crtc *crtc)
+{
+ struct sti_mixer *mixer = to_sti_mixer(crtc);
+
+ if (mixer->id == STI_MIXER_MAIN)
+ return true;
+
+ return false;
+}
+
+int sti_drm_crtc_init(struct drm_device *drm_dev, struct sti_mixer *mixer,
+ struct drm_plane *primary, struct drm_plane *cursor)
+{
+ struct drm_crtc *crtc = &mixer->drm_crtc;
+ int res;
+
+ res = drm_crtc_init_with_planes(drm_dev, crtc, primary, cursor,
+ &sti_crtc_funcs);
+ if (res) {
+ DRM_ERROR("Can not initialze CRTC\n");
+ return -EINVAL;
+ }
+
+ drm_crtc_helper_add(crtc, &sti_crtc_helper_funcs);
+
+ DRM_DEBUG_DRIVER("drm CRTC:%d mapped to %s\n",
+ crtc->base.id, sti_mixer_to_str(mixer));
+
+ return 0;
+}
diff --git a/drivers/gpu/drm/sti/sti_drm_crtc.h b/drivers/gpu/drm/sti/sti_drm_crtc.h
new file mode 100644
index 0000000..caca8b1
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_drm_crtc.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_DRM_CRTC_H_
+#define _STI_DRM_CRTC_H_
+
+#include <drm/drmP.h>
+
+struct sti_mixer;
+
+int sti_drm_crtc_init(struct drm_device *drm_dev, struct sti_mixer *mixer,
+ struct drm_plane *primary, struct drm_plane *cursor);
+int sti_drm_crtc_enable_vblank(struct drm_device *dev, int crtc);
+void sti_drm_crtc_disable_vblank(struct drm_device *dev, int crtc);
+int sti_drm_crtc_vblank_cb(struct notifier_block *nb,
+ unsigned long event, void *data);
+bool sti_drm_crtc_is_main(struct drm_crtc *drm_crtc);
+
+#endif
diff --git a/drivers/gpu/drm/sti/sti_drm_drv.c b/drivers/gpu/drm/sti/sti_drm_drv.c
new file mode 100644
index 0000000..a7cc249
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_drm_drv.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <drm/drmP.h>
+
+#include <linux/component.h>
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+
+#include "sti_drm_drv.h"
+#include "sti_drm_crtc.h"
+
+#define DRIVER_NAME "sti"
+#define DRIVER_DESC "STMicroelectronics SoC DRM"
+#define DRIVER_DATE "20140601"
+#define DRIVER_MAJOR 1
+#define DRIVER_MINOR 0
+
+#define STI_MAX_FB_HEIGHT 4096
+#define STI_MAX_FB_WIDTH 4096
+
+static struct drm_mode_config_funcs sti_drm_mode_config_funcs = {
+ .fb_create = drm_fb_cma_create,
+};
+
+static void sti_drm_mode_config_init(struct drm_device *dev)
+{
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+
+ /*
+ * set max width and height as default value.
+ * this value would be used to check framebuffer size limitation
+ * at drm_mode_addfb().
+ */
+ dev->mode_config.max_width = STI_MAX_FB_HEIGHT;
+ dev->mode_config.max_height = STI_MAX_FB_WIDTH;
+
+ dev->mode_config.funcs = &sti_drm_mode_config_funcs;
+}
+
+static int sti_drm_load(struct drm_device *dev, unsigned long flags)
+{
+ struct sti_drm_private *private;
+ int ret;
+
+ private = kzalloc(sizeof(struct sti_drm_private), GFP_KERNEL);
+ if (!private) {
+ DRM_ERROR("Failed to allocate private\n");
+ return -ENOMEM;
+ }
+ dev->dev_private = (void *)private;
+ private->drm_dev = dev;
+
+ drm_mode_config_init(dev);
+ drm_kms_helper_poll_init(dev);
+
+ sti_drm_mode_config_init(dev);
+
+ ret = component_bind_all(dev->dev, dev);
+ if (ret)
+ return ret;
+
+ drm_helper_disable_unused_functions(dev);
+
+#ifdef CONFIG_DRM_STI_FBDEV
+ drm_fbdev_cma_init(dev, 32,
+ dev->mode_config.num_crtc,
+ dev->mode_config.num_connector);
+#endif
+ return 0;
+}
+
+static const struct file_operations sti_drm_driver_fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .mmap = drm_gem_cma_mmap,
+ .poll = drm_poll,
+ .read = drm_read,
+ .unlocked_ioctl = drm_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
+ .release = drm_release,
+};
+
+static struct dma_buf *sti_drm_gem_prime_export(struct drm_device *dev,
+ struct drm_gem_object *obj,
+ int flags)
+{
+ /* we want to be able to write in mmapped buffer */
+ flags |= O_RDWR;
+ return drm_gem_prime_export(dev, obj, flags);
+}
+
+static struct drm_driver sti_drm_driver = {
+ .driver_features = DRIVER_HAVE_IRQ | DRIVER_MODESET |
+ DRIVER_GEM | DRIVER_PRIME,
+ .load = sti_drm_load,
+ .gem_free_object = drm_gem_cma_free_object,
+ .gem_vm_ops = &drm_gem_cma_vm_ops,
+ .dumb_create = drm_gem_cma_dumb_create,
+ .dumb_map_offset = drm_gem_cma_dumb_map_offset,
+ .dumb_destroy = drm_gem_dumb_destroy,
+ .fops = &sti_drm_driver_fops,
+
+ .get_vblank_counter = drm_vblank_count,
+ .enable_vblank = sti_drm_crtc_enable_vblank,
+ .disable_vblank = sti_drm_crtc_disable_vblank,
+
+ .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+ .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+ .gem_prime_export = sti_drm_gem_prime_export,
+ .gem_prime_import = drm_gem_prime_import,
+ .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
+ .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
+ .gem_prime_vmap = drm_gem_cma_prime_vmap,
+ .gem_prime_vunmap = drm_gem_cma_prime_vunmap,
+ .gem_prime_mmap = drm_gem_cma_prime_mmap,
+
+ .name = DRIVER_NAME,
+ .desc = DRIVER_DESC,
+ .date = DRIVER_DATE,
+ .major = DRIVER_MAJOR,
+ .minor = DRIVER_MINOR,
+};
+
+static int compare_of(struct device *dev, void *data)
+{
+ return dev->of_node == data;
+}
+
+static int sti_drm_bind(struct device *dev)
+{
+ return drm_platform_init(&sti_drm_driver, to_platform_device(dev));
+}
+
+static void sti_drm_unbind(struct device *dev)
+{
+ drm_put_dev(dev_get_drvdata(dev));
+}
+
+static const struct component_master_ops sti_drm_ops = {
+ .bind = sti_drm_bind,
+ .unbind = sti_drm_unbind,
+};
+
+static int sti_drm_master_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->parent->of_node;
+ struct device_node *child_np;
+ struct component_match *match = NULL;
+
+ dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
+
+ child_np = of_get_next_available_child(node, NULL);
+
+ while (child_np) {
+ component_match_add(dev, &match, compare_of, child_np);
+ of_node_put(child_np);
+ child_np = of_get_next_available_child(node, child_np);
+ }
+
+ return component_master_add_with_match(dev, &sti_drm_ops, match);
+}
+
+static int sti_drm_master_remove(struct platform_device *pdev)
+{
+ component_master_del(&pdev->dev, &sti_drm_ops);
+ return 0;
+}
+
+static struct platform_driver sti_drm_master_driver = {
+ .probe = sti_drm_master_probe,
+ .remove = sti_drm_master_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME "__master",
+ },
+};
+
+static int sti_drm_platform_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct platform_device *master;
+
+ of_platform_populate(node, NULL, NULL, dev);
+
+ platform_driver_register(&sti_drm_master_driver);
+ master = platform_device_register_resndata(dev,
+ DRIVER_NAME "__master", -1,
+ NULL, 0, NULL, 0);
+ if (!master)
+ return -EINVAL;
+
+ platform_set_drvdata(pdev, master);
+ return 0;
+}
+
+static int sti_drm_platform_remove(struct platform_device *pdev)
+{
+ struct platform_device *master = platform_get_drvdata(pdev);
+
+ of_platform_depopulate(&pdev->dev);
+ platform_device_unregister(master);
+ platform_driver_unregister(&sti_drm_master_driver);
+ return 0;
+}
+
+static const struct of_device_id sti_drm_dt_ids[] = {
+ { .compatible = "st,sti-display-subsystem", },
+ { /* end node */ },
+};
+MODULE_DEVICE_TABLE(of, sti_drm_dt_ids);
+
+static struct platform_driver sti_drm_platform_driver = {
+ .probe = sti_drm_platform_probe,
+ .remove = sti_drm_platform_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ .of_match_table = sti_drm_dt_ids,
+ },
+};
+
+module_platform_driver(sti_drm_platform_driver);
+
+MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/sti/sti_drm_drv.h b/drivers/gpu/drm/sti/sti_drm_drv.h
new file mode 100644
index 0000000..ec5e2eb
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_drm_drv.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_DRM_DRV_H_
+#define _STI_DRM_DRV_H_
+
+#include <drm/drmP.h>
+
+struct sti_compositor;
+struct sti_tvout;
+
+/**
+ * STI drm private structure
+ * This structure is stored as private in the drm_device
+ *
+ * @compo: compositor
+ * @plane_zorder_property: z-order property for CRTC planes
+ * @drm_dev: drm device
+ */
+struct sti_drm_private {
+ struct sti_compositor *compo;
+ struct drm_property *plane_zorder_property;
+ struct drm_device *drm_dev;
+};
+
+#endif
diff --git a/drivers/gpu/drm/sti/sti_drm_plane.c b/drivers/gpu/drm/sti/sti_drm_plane.c
new file mode 100644
index 0000000..f4118d4
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_drm_plane.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
+ * Fabien Dessenne <fabien.dessenne@st.com>
+ * for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include "sti_compositor.h"
+#include "sti_drm_drv.h"
+#include "sti_drm_plane.h"
+#include "sti_vtg.h"
+
+enum sti_layer_desc sti_layer_default_zorder[] = {
+ STI_GDP_0,
+ STI_VID_0,
+ STI_GDP_1,
+ STI_VID_1,
+ STI_GDP_2,
+ STI_GDP_3,
+};
+
+/* (Background) < GDP0 < VID0 < GDP1 < VID1 < GDP2 < GDP3 < (ForeGround) */
+
+static int
+sti_drm_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
+ struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
+{
+ struct sti_layer *layer = to_sti_layer(plane);
+ struct sti_mixer *mixer = to_sti_mixer(crtc);
+ int res;
+
+ DRM_DEBUG_KMS("CRTC:%d (%s) drm plane:%d (%s) drm fb:%d\n",
+ crtc->base.id, sti_mixer_to_str(mixer),
+ plane->base.id, sti_layer_to_str(layer), fb->base.id);
+ DRM_DEBUG_KMS("(%dx%d)@(%d,%d)\n", crtc_w, crtc_h, crtc_x, crtc_y);
+
+ res = sti_mixer_set_layer_depth(mixer, layer);
+ if (res) {
+ DRM_ERROR("Can not set layer depth\n");
+ return res;
+ }
+
+ /* src_x are in 16.16 format. */
+ res = sti_layer_prepare(layer, fb, &crtc->mode, mixer->id,
+ crtc_x, crtc_y, crtc_w, crtc_h,
+ src_x >> 16, src_y >> 16,
+ src_w >> 16, src_h >> 16);
+ if (res) {
+ DRM_ERROR("Layer prepare failed\n");
+ return res;
+ }
+
+ res = sti_layer_commit(layer);
+ if (res) {
+ DRM_ERROR("Layer commit failed\n");
+ return res;
+ }
+
+ res = sti_mixer_set_layer_status(mixer, layer, true);
+ if (res) {
+ DRM_ERROR("Can not enable layer at mixer\n");
+ return res;
+ }
+
+ return 0;
+}
+
+static int sti_drm_disable_plane(struct drm_plane *plane)
+{
+ struct sti_layer *layer;
+ struct sti_mixer *mixer;
+ int lay_res, mix_res;
+
+ if (!plane->crtc) {
+ DRM_DEBUG_DRIVER("drm plane:%d not enabled\n", plane->base.id);
+ return 0;
+ }
+ layer = to_sti_layer(plane);
+ mixer = to_sti_mixer(plane->crtc);
+
+ DRM_DEBUG_DRIVER("CRTC:%d (%s) drm plane:%d (%s)\n",
+ plane->crtc->base.id, sti_mixer_to_str(mixer),
+ plane->base.id, sti_layer_to_str(layer));
+
+ /* Disable layer at mixer level */
+ mix_res = sti_mixer_set_layer_status(mixer, layer, false);
+ if (mix_res)
+ DRM_ERROR("Can not disable layer at mixer\n");
+
+ /* Wait a while to be sure that a Vsync event is received */
+ msleep(WAIT_NEXT_VSYNC_MS);
+
+ /* Then disable layer itself */
+ lay_res = sti_layer_disable(layer);
+ if (lay_res)
+ DRM_ERROR("Layer disable failed\n");
+
+ if (lay_res || mix_res)
+ return -EINVAL;
+
+ return 0;
+}
+
+static void sti_drm_plane_destroy(struct drm_plane *plane)
+{
+ DRM_DEBUG_DRIVER("\n");
+
+ sti_drm_disable_plane(plane);
+ drm_plane_cleanup(plane);
+}
+
+static int sti_drm_plane_set_property(struct drm_plane *plane,
+ struct drm_property *property,
+ uint64_t val)
+{
+ struct drm_device *dev = plane->dev;
+ struct sti_drm_private *private = dev->dev_private;
+ struct sti_layer *layer = to_sti_layer(plane);
+
+ DRM_DEBUG_DRIVER("\n");
+
+ if (property == private->plane_zorder_property) {
+ layer->zorder = val;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static struct drm_plane_funcs sti_drm_plane_funcs = {
+ .update_plane = sti_drm_update_plane,
+ .disable_plane = sti_drm_disable_plane,
+ .destroy = sti_drm_plane_destroy,
+ .set_property = sti_drm_plane_set_property,
+};
+
+static void sti_drm_plane_attach_zorder_property(struct drm_plane *plane,
+ uint64_t default_val)
+{
+ struct drm_device *dev = plane->dev;
+ struct sti_drm_private *private = dev->dev_private;
+ struct drm_property *prop;
+ struct sti_layer *layer = to_sti_layer(plane);
+
+ prop = private->plane_zorder_property;
+ if (!prop) {
+ prop = drm_property_create_range(dev, 0, "zpos", 0,
+ GAM_MIXER_NB_DEPTH_LEVEL - 1);
+ if (!prop)
+ return;
+
+ private->plane_zorder_property = prop;
+ }
+
+ drm_object_attach_property(&plane->base, prop, default_val);
+ layer->zorder = default_val;
+}
+
+struct drm_plane *sti_drm_plane_init(struct drm_device *dev,
+ struct sti_layer *layer,
+ unsigned int possible_crtcs,
+ enum drm_plane_type type)
+{
+ int err, i;
+ uint64_t default_zorder = 0;
+
+ err = drm_universal_plane_init(dev, &layer->plane, possible_crtcs,
+ &sti_drm_plane_funcs,
+ sti_layer_get_formats(layer),
+ sti_layer_get_nb_formats(layer), type);
+ if (err) {
+ DRM_ERROR("Failed to initialize plane\n");
+ return NULL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sti_layer_default_zorder); i++)
+ if (sti_layer_default_zorder[i] == layer->desc)
+ break;
+
+ default_zorder = i;
+
+ if (type == DRM_PLANE_TYPE_OVERLAY)
+ sti_drm_plane_attach_zorder_property(&layer->plane,
+ default_zorder);
+
+ DRM_DEBUG_DRIVER("drm plane:%d mapped to %s with zorder:%llu\n",
+ layer->plane.base.id,
+ sti_layer_to_str(layer), default_zorder);
+
+ return &layer->plane;
+}
diff --git a/drivers/gpu/drm/sti/sti_drm_plane.h b/drivers/gpu/drm/sti/sti_drm_plane.h
new file mode 100644
index 0000000..4f19183
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_drm_plane.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_DRM_PLANE_H_
+#define _STI_DRM_PLANE_H_
+
+#include <drm/drmP.h>
+
+struct sti_layer;
+
+struct drm_plane *sti_drm_plane_init(struct drm_device *dev,
+ struct sti_layer *layer,
+ unsigned int possible_crtcs,
+ enum drm_plane_type type);
+#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH v8 11/11] drm: sti: Add DRM driver itself
2014-07-30 17:42 ` [PATCH v8 11/11] drm: sti: Add DRM driver itself Benjamin Gaignard
@ 2014-07-30 19:48 ` Daniel Vetter
2016-04-22 13:27 ` Daniel Vetter
1 sibling, 0 replies; 20+ messages in thread
From: Daniel Vetter @ 2014-07-30 19:48 UTC (permalink / raw)
To: Benjamin Gaignard
Cc: dri-devel, linaro-mm-sig, Linux Kernel Mailing List, Dave Airlie
On Wed, Jul 30, 2014 at 7:42 PM, Benjamin Gaignard
<benjamin.gaignard@linaro.org> wrote:
> @@ -87,11 +90,50 @@ static int sti_compositor_bind(struct device *dev, struct device *master,
> struct sti_compositor *compo = dev_get_drvdata(dev);
> struct drm_device *drm_dev = data;
> unsigned int i, crtc = 0, plane = 0;
> + struct sti_drm_private *dev_priv = drm_dev->dev_private;
> + struct drm_plane *cursor = NULL;
> + struct drm_plane *primary = NULL;
> +
> + dev_priv->compo = compo;
>
> drm_vblank_init(drm_dev, crtc);
This looks strange - you should pass this the total number of crtcs
(the same that eventually ends up in dev->mode_config.num_crtc), not
0. And the assignement of cursors to crtcs looks a bit strange on
first read-through, but I have no clue about the sti hw. And in any
case those pointers really only matter for backwards compat with
existing pageflip and cursor ioctls, so doesn't really matter too
much.
Anyway didn't spot anything else which would need to be upgrade to
never kms interfaces, so ack from my side for that. Only looked at
that since right now I'm refreshing drm docs in those areas ;-)
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v8 11/11] drm: sti: Add DRM driver itself
@ 2014-07-30 19:48 ` Daniel Vetter
0 siblings, 0 replies; 20+ messages in thread
From: Daniel Vetter @ 2014-07-30 19:48 UTC (permalink / raw)
To: Benjamin Gaignard; +Cc: linaro-mm-sig, Linux Kernel Mailing List, dri-devel
On Wed, Jul 30, 2014 at 7:42 PM, Benjamin Gaignard
<benjamin.gaignard@linaro.org> wrote:
> @@ -87,11 +90,50 @@ static int sti_compositor_bind(struct device *dev, struct device *master,
> struct sti_compositor *compo = dev_get_drvdata(dev);
> struct drm_device *drm_dev = data;
> unsigned int i, crtc = 0, plane = 0;
> + struct sti_drm_private *dev_priv = drm_dev->dev_private;
> + struct drm_plane *cursor = NULL;
> + struct drm_plane *primary = NULL;
> +
> + dev_priv->compo = compo;
>
> drm_vblank_init(drm_dev, crtc);
This looks strange - you should pass this the total number of crtcs
(the same that eventually ends up in dev->mode_config.num_crtc), not
0. And the assignement of cursors to crtcs looks a bit strange on
first read-through, but I have no clue about the sti hw. And in any
case those pointers really only matter for backwards compat with
existing pageflip and cursor ioctls, so doesn't really matter too
much.
Anyway didn't spot anything else which would need to be upgrade to
never kms interfaces, so ack from my side for that. Only looked at
that since right now I'm refreshing drm docs in those areas ;-)
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v8 11/11] drm: sti: Add DRM driver itself
2014-07-30 19:48 ` Daniel Vetter
@ 2014-07-30 21:04 ` Rob Clark
-1 siblings, 0 replies; 20+ messages in thread
From: Rob Clark @ 2014-07-30 21:04 UTC (permalink / raw)
To: Daniel Vetter
Cc: Benjamin Gaignard, linaro-mm-sig, Linux Kernel Mailing List, dri-devel
On Wed, Jul 30, 2014 at 3:48 PM, Daniel Vetter <daniel@ffwll.ch> wrote:
> On Wed, Jul 30, 2014 at 7:42 PM, Benjamin Gaignard
> <benjamin.gaignard@linaro.org> wrote:
>> @@ -87,11 +90,50 @@ static int sti_compositor_bind(struct device *dev, struct device *master,
>> struct sti_compositor *compo = dev_get_drvdata(dev);
>> struct drm_device *drm_dev = data;
>> unsigned int i, crtc = 0, plane = 0;
>> + struct sti_drm_private *dev_priv = drm_dev->dev_private;
>> + struct drm_plane *cursor = NULL;
>> + struct drm_plane *primary = NULL;
>> +
>> + dev_priv->compo = compo;
>>
>> drm_vblank_init(drm_dev, crtc);
>
>
> This looks strange - you should pass this the total number of crtcs
> (the same that eventually ends up in dev->mode_config.num_crtc), not
> 0. And the assignement of cursors to crtcs looks a bit strange on
hmm, Benjamin probably should try modetest w/ -v arg.. it does look a
bit like something is missing here..
BR,
-R
> first read-through, but I have no clue about the sti hw. And in any
> case those pointers really only matter for backwards compat with
> existing pageflip and cursor ioctls, so doesn't really matter too
> much.
>
> Anyway didn't spot anything else which would need to be upgrade to
> never kms interfaces, so ack from my side for that. Only looked at
> that since right now I'm refreshing drm docs in those areas ;-)
> -Daniel
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v8 11/11] drm: sti: Add DRM driver itself
@ 2014-07-30 21:04 ` Rob Clark
0 siblings, 0 replies; 20+ messages in thread
From: Rob Clark @ 2014-07-30 21:04 UTC (permalink / raw)
To: Daniel Vetter
Cc: linaro-mm-sig, dri-devel, Linux Kernel Mailing List, Benjamin Gaignard
On Wed, Jul 30, 2014 at 3:48 PM, Daniel Vetter <daniel@ffwll.ch> wrote:
> On Wed, Jul 30, 2014 at 7:42 PM, Benjamin Gaignard
> <benjamin.gaignard@linaro.org> wrote:
>> @@ -87,11 +90,50 @@ static int sti_compositor_bind(struct device *dev, struct device *master,
>> struct sti_compositor *compo = dev_get_drvdata(dev);
>> struct drm_device *drm_dev = data;
>> unsigned int i, crtc = 0, plane = 0;
>> + struct sti_drm_private *dev_priv = drm_dev->dev_private;
>> + struct drm_plane *cursor = NULL;
>> + struct drm_plane *primary = NULL;
>> +
>> + dev_priv->compo = compo;
>>
>> drm_vblank_init(drm_dev, crtc);
>
>
> This looks strange - you should pass this the total number of crtcs
> (the same that eventually ends up in dev->mode_config.num_crtc), not
> 0. And the assignement of cursors to crtcs looks a bit strange on
hmm, Benjamin probably should try modetest w/ -v arg.. it does look a
bit like something is missing here..
BR,
-R
> first read-through, but I have no clue about the sti hw. And in any
> case those pointers really only matter for backwards compat with
> existing pageflip and cursor ioctls, so doesn't really matter too
> much.
>
> Anyway didn't spot anything else which would need to be upgrade to
> never kms interfaces, so ack from my side for that. Only looked at
> that since right now I'm refreshing drm docs in those areas ;-)
> -Daniel
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v8 11/11] drm: sti: Add DRM driver itself
2014-07-30 21:04 ` Rob Clark
@ 2014-07-31 7:53 ` Benjamin Gaignard
-1 siblings, 0 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-31 7:53 UTC (permalink / raw)
To: Rob Clark
Cc: Daniel Vetter, linaro-mm-sig, Linux Kernel Mailing List, dri-devel
It is a regression that I have introduce with universal plane.
I have fix it and refresh v8 branch.
I have map CRTC on hardware mixers IP.
I could have one or two mixers, its depends of the chipset and I use
one graphic input (GDP) per mixer as primary plane.
Other GPD are used as overlay planes.
Some version of the display IP have one hardware cursor which could be
used only with the first mixer.
I haven't push yet the code to support the cursor, I would like to do
it when the current patches will have been accepted and merge
upstream.
2014-07-30 23:04 GMT+02:00 Rob Clark <robdclark@gmail.com>:
> On Wed, Jul 30, 2014 at 3:48 PM, Daniel Vetter <daniel@ffwll.ch> wrote:
>> On Wed, Jul 30, 2014 at 7:42 PM, Benjamin Gaignard
>> <benjamin.gaignard@linaro.org> wrote:
>>> @@ -87,11 +90,50 @@ static int sti_compositor_bind(struct device *dev, struct device *master,
>>> struct sti_compositor *compo = dev_get_drvdata(dev);
>>> struct drm_device *drm_dev = data;
>>> unsigned int i, crtc = 0, plane = 0;
>>> + struct sti_drm_private *dev_priv = drm_dev->dev_private;
>>> + struct drm_plane *cursor = NULL;
>>> + struct drm_plane *primary = NULL;
>>> +
>>> + dev_priv->compo = compo;
>>>
>>> drm_vblank_init(drm_dev, crtc);
>>
>>
>> This looks strange - you should pass this the total number of crtcs
>> (the same that eventually ends up in dev->mode_config.num_crtc), not
>> 0. And the assignement of cursors to crtcs looks a bit strange on
>
> hmm, Benjamin probably should try modetest w/ -v arg.. it does look a
> bit like something is missing here..
>
> BR,
> -R
>
>> first read-through, but I have no clue about the sti hw. And in any
>> case those pointers really only matter for backwards compat with
>> existing pageflip and cursor ioctls, so doesn't really matter too
>> much.
>>
>> Anyway didn't spot anything else which would need to be upgrade to
>> never kms interfaces, so ack from my side for that. Only looked at
>> that since right now I'm refreshing drm docs in those areas ;-)
>> -Daniel
>> --
>> Daniel Vetter
>> Software Engineer, Intel Corporation
>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Benjamin Gaignard
Graphic Working Group
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v8 11/11] drm: sti: Add DRM driver itself
@ 2014-07-31 7:53 ` Benjamin Gaignard
0 siblings, 0 replies; 20+ messages in thread
From: Benjamin Gaignard @ 2014-07-31 7:53 UTC (permalink / raw)
To: Rob Clark; +Cc: linaro-mm-sig, dri-devel, Linux Kernel Mailing List
It is a regression that I have introduce with universal plane.
I have fix it and refresh v8 branch.
I have map CRTC on hardware mixers IP.
I could have one or two mixers, its depends of the chipset and I use
one graphic input (GDP) per mixer as primary plane.
Other GPD are used as overlay planes.
Some version of the display IP have one hardware cursor which could be
used only with the first mixer.
I haven't push yet the code to support the cursor, I would like to do
it when the current patches will have been accepted and merge
upstream.
2014-07-30 23:04 GMT+02:00 Rob Clark <robdclark@gmail.com>:
> On Wed, Jul 30, 2014 at 3:48 PM, Daniel Vetter <daniel@ffwll.ch> wrote:
>> On Wed, Jul 30, 2014 at 7:42 PM, Benjamin Gaignard
>> <benjamin.gaignard@linaro.org> wrote:
>>> @@ -87,11 +90,50 @@ static int sti_compositor_bind(struct device *dev, struct device *master,
>>> struct sti_compositor *compo = dev_get_drvdata(dev);
>>> struct drm_device *drm_dev = data;
>>> unsigned int i, crtc = 0, plane = 0;
>>> + struct sti_drm_private *dev_priv = drm_dev->dev_private;
>>> + struct drm_plane *cursor = NULL;
>>> + struct drm_plane *primary = NULL;
>>> +
>>> + dev_priv->compo = compo;
>>>
>>> drm_vblank_init(drm_dev, crtc);
>>
>>
>> This looks strange - you should pass this the total number of crtcs
>> (the same that eventually ends up in dev->mode_config.num_crtc), not
>> 0. And the assignement of cursors to crtcs looks a bit strange on
>
> hmm, Benjamin probably should try modetest w/ -v arg.. it does look a
> bit like something is missing here..
>
> BR,
> -R
>
>> first read-through, but I have no clue about the sti hw. And in any
>> case those pointers really only matter for backwards compat with
>> existing pageflip and cursor ioctls, so doesn't really matter too
>> much.
>>
>> Anyway didn't spot anything else which would need to be upgrade to
>> never kms interfaces, so ack from my side for that. Only looked at
>> that since right now I'm refreshing drm docs in those areas ;-)
>> -Daniel
>> --
>> Daniel Vetter
>> Software Engineer, Intel Corporation
>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Benjamin Gaignard
Graphic Working Group
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v8 11/11] drm: sti: Add DRM driver itself
2014-07-30 17:42 ` [PATCH v8 11/11] drm: sti: Add DRM driver itself Benjamin Gaignard
@ 2016-04-22 13:27 ` Daniel Vetter
2016-04-22 13:27 ` Daniel Vetter
1 sibling, 0 replies; 20+ messages in thread
From: Daniel Vetter @ 2016-04-22 13:27 UTC (permalink / raw)
To: Benjamin Gaignard
Cc: dri-devel, linaro-mm-sig, Linux Kernel Mailing List, Dave Airlie
On Wed, Jul 30, 2014 at 7:42 PM, Benjamin Gaignard
<benjamin.gaignard@linaro.org> wrote:
> +static int sti_drm_crtc_page_flip(struct drm_crtc *crtc,
> + struct drm_framebuffer *fb,
> + struct drm_pending_vblank_event *event,
> + uint32_t page_flip_flags)
> +{
> + struct drm_device *drm_dev = crtc->dev;
> + struct drm_framebuffer *old_fb;
> + struct sti_mixer *mixer = to_sti_mixer(crtc);
> + unsigned long flags;
> + int ret;
> +
> + DRM_DEBUG_KMS("fb %d --> fb %d\n",
> + crtc->primary->fb->base.id, fb->base.id);
> +
> + mutex_lock(&drm_dev->struct_mutex);
struct_mutex locking here is pure cargo-cult. Please remove asap.
-Daniel
> +
> + old_fb = crtc->primary->fb;
> + crtc->primary->fb = fb;
> + ret = sti_drm_crtc_mode_set_base(crtc, crtc->x, crtc->y, old_fb);
> + if (ret) {
> + DRM_ERROR("failed\n");
> + crtc->primary->fb = old_fb;
> + goto out;
> + }
> +
> + if (event) {
> + event->pipe = mixer->id;
> +
> + ret = drm_vblank_get(drm_dev, event->pipe);
> + if (ret) {
> + DRM_ERROR("Cannot get vblank\n");
> + goto out;
> + }
> +
> + spin_lock_irqsave(&drm_dev->event_lock, flags);
> + if (mixer->pending_event) {
> + drm_vblank_put(drm_dev, event->pipe);
> + ret = -EBUSY;
> + } else {
> + mixer->pending_event = event;
> + }
> + spin_unlock_irqrestore(&drm_dev->event_lock, flags);
> + }
> +out:
> + mutex_unlock(&drm_dev->struct_mutex);
> + return ret;
> +}
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v8 11/11] drm: sti: Add DRM driver itself
@ 2016-04-22 13:27 ` Daniel Vetter
0 siblings, 0 replies; 20+ messages in thread
From: Daniel Vetter @ 2016-04-22 13:27 UTC (permalink / raw)
To: Benjamin Gaignard; +Cc: linaro-mm-sig, Linux Kernel Mailing List, dri-devel
On Wed, Jul 30, 2014 at 7:42 PM, Benjamin Gaignard
<benjamin.gaignard@linaro.org> wrote:
> +static int sti_drm_crtc_page_flip(struct drm_crtc *crtc,
> + struct drm_framebuffer *fb,
> + struct drm_pending_vblank_event *event,
> + uint32_t page_flip_flags)
> +{
> + struct drm_device *drm_dev = crtc->dev;
> + struct drm_framebuffer *old_fb;
> + struct sti_mixer *mixer = to_sti_mixer(crtc);
> + unsigned long flags;
> + int ret;
> +
> + DRM_DEBUG_KMS("fb %d --> fb %d\n",
> + crtc->primary->fb->base.id, fb->base.id);
> +
> + mutex_lock(&drm_dev->struct_mutex);
struct_mutex locking here is pure cargo-cult. Please remove asap.
-Daniel
> +
> + old_fb = crtc->primary->fb;
> + crtc->primary->fb = fb;
> + ret = sti_drm_crtc_mode_set_base(crtc, crtc->x, crtc->y, old_fb);
> + if (ret) {
> + DRM_ERROR("failed\n");
> + crtc->primary->fb = old_fb;
> + goto out;
> + }
> +
> + if (event) {
> + event->pipe = mixer->id;
> +
> + ret = drm_vblank_get(drm_dev, event->pipe);
> + if (ret) {
> + DRM_ERROR("Cannot get vblank\n");
> + goto out;
> + }
> +
> + spin_lock_irqsave(&drm_dev->event_lock, flags);
> + if (mixer->pending_event) {
> + drm_vblank_put(drm_dev, event->pipe);
> + ret = -EBUSY;
> + } else {
> + mixer->pending_event = event;
> + }
> + spin_unlock_irqrestore(&drm_dev->event_lock, flags);
> + }
> +out:
> + mutex_unlock(&drm_dev->struct_mutex);
> + return ret;
> +}
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2016-04-22 13:27 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-30 17:41 [PATCH v8 00/11] Add DRM for stih4xx platforms Benjamin Gaignard
2014-07-30 17:41 ` [PATCH v8 01/11] drm: sti: add bindings for DRM driver Benjamin Gaignard
2014-07-30 17:41 ` [PATCH v8 02/11] drm: sti: add VTG driver Benjamin Gaignard
2014-07-30 17:41 ` [PATCH v8 03/11] drm: sti: add VTAC drivers Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 04/11] drm: sti: add HDMI driver Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 05/11] drm: sti: add HDA driver Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 06/11] drm: sti: add TVOut driver Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 07/11] drm: sti: add GDP layer Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 08/11] drm: sti: add VID layer Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 09/11] drm: sti: add Mixer Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 10/11] drm: sti: add Compositor Benjamin Gaignard
2014-07-30 17:42 ` [PATCH v8 11/11] drm: sti: Add DRM driver itself Benjamin Gaignard
2014-07-30 19:48 ` Daniel Vetter
2014-07-30 19:48 ` Daniel Vetter
2014-07-30 21:04 ` Rob Clark
2014-07-30 21:04 ` Rob Clark
2014-07-31 7:53 ` Benjamin Gaignard
2014-07-31 7:53 ` Benjamin Gaignard
2016-04-22 13:27 ` Daniel Vetter
2016-04-22 13:27 ` Daniel Vetter
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.