* [U-Boot] [PATCH] ARM: tegra: remove custom define for Jetson TK1
@ 2014-07-31 23:29 Stephen Warren
2014-08-01 3:12 ` Masahiro Yamada
0 siblings, 1 reply; 5+ messages in thread
From: Stephen Warren @ 2014-07-31 23:29 UTC (permalink / raw)
To: u-boot
From: Stephen Warren <swarren@nvidia.com>
Now that Kconfig has a per-board option, we can use that directly rather
than inventing a custom define for the AS3722 code to determine which
board it's being built for.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
board/nvidia/venice2/as3722_init.h | 2 +-
configs/jetson-tk1_defconfig | 1 -
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/board/nvidia/venice2/as3722_init.h b/board/nvidia/venice2/as3722_init.h
index a7b24039f6aa..06c366e0d0d8 100644
--- a/board/nvidia/venice2/as3722_init.h
+++ b/board/nvidia/venice2/as3722_init.h
@@ -18,7 +18,7 @@
#define AS3722_LDO6VOLTAGE_REG 0x16 /* VDD_SDMMC */
#define AS3722_LDCONTROL_REG 0x4E
-#ifdef CONFIG_BOARD_JETSON_TK1
+#ifdef CONFIG_TARGET_JETSON_TK1
#define AS3722_SD0VOLTAGE_DATA (0x3C00 | AS3722_SD0VOLTAGE_REG)
#else
#define AS3722_SD0VOLTAGE_DATA (0x2800 | AS3722_SD0VOLTAGE_REG)
diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig
index 9ce97c9f61b2..6926257d894b 100644
--- a/configs/jetson-tk1_defconfig
+++ b/configs/jetson-tk1_defconfig
@@ -1,4 +1,3 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="BOARD_JETSON_TK1="
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_JETSON_TK1=y
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH] ARM: tegra: remove custom define for Jetson TK1
2014-07-31 23:29 [U-Boot] [PATCH] ARM: tegra: remove custom define for Jetson TK1 Stephen Warren
@ 2014-08-01 3:12 ` Masahiro Yamada
2014-08-01 18:36 ` Stephen Warren
0 siblings, 1 reply; 5+ messages in thread
From: Masahiro Yamada @ 2014-08-01 3:12 UTC (permalink / raw)
To: u-boot
Hi Stephen,
On Thu, 31 Jul 2014 17:29:38 -0600
Stephen Warren <swarren@wwwdotorg.org> wrote:
> From: Stephen Warren <swarren@nvidia.com>
>
> Now that Kconfig has a per-board option, we can use that directly rather
> than inventing a custom define for the AS3722 code to determine which
> board it's being built for.
>
> Signed-off-by: Stephen Warren <swarren@nvidia.com>
> ---
> board/nvidia/venice2/as3722_init.h | 2 +-
> configs/jetson-tk1_defconfig | 1 -
> 2 files changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/board/nvidia/venice2/as3722_init.h b/board/nvidia/venice2/as3722_init.h
> index a7b24039f6aa..06c366e0d0d8 100644
> --- a/board/nvidia/venice2/as3722_init.h
> +++ b/board/nvidia/venice2/as3722_init.h
> @@ -18,7 +18,7 @@
> #define AS3722_LDO6VOLTAGE_REG 0x16 /* VDD_SDMMC */
> #define AS3722_LDCONTROL_REG 0x4E
>
> -#ifdef CONFIG_BOARD_JETSON_TK1
> +#ifdef CONFIG_TARGET_JETSON_TK1
> #define AS3722_SD0VOLTAGE_DATA (0x3C00 | AS3722_SD0VOLTAGE_REG)
> #else
> #define AS3722_SD0VOLTAGE_DATA (0x2800 | AS3722_SD0VOLTAGE_REG)
> diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig
> index 9ce97c9f61b2..6926257d894b 100644
> --- a/configs/jetson-tk1_defconfig
> +++ b/configs/jetson-tk1_defconfig
> @@ -1,4 +1,3 @@
> CONFIG_SPL=y
> -CONFIG_SYS_EXTRA_OPTIONS="BOARD_JETSON_TK1="
> +S:CONFIG_ARM=y
> +S:CONFIG_TARGET_JETSON_TK1=y
> --
> 1.9.1
Or you may rename CONFIG_TARGET_JETSON_TK1 to CONFIG_BOARD_JETSON_TK1
or another name.
I don't want to force CONFIG_TARGET_ name convention.
You can change config names if you like. It is up to you.
FYI, this is the reason why I used CONFIG_TARGET_ when I
auto-generated the initial version of Kconfig and defconfig files:
The 'integrator' board is supported for various ARM cores such as
arm720t, ar920t, arm926ejs, arm1136. They use the same board
but different config headers.
So CONFIG_BOARD_INTEGRATOR is not an identical macro pointing to
the config header.
When I see Tegra family, each board has its own config header.
CONFIG_BOARD_ as well as CONFIG_TARGET_ will work.
In future, perhaps only the SoC select
(CONFIG_TEGRA20, _TEGRA30, _TEGRA114, _TEGRA124)
will rename in the Kconfig and
the board select might be pushed into device trees.
I am not sure..
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH] ARM: tegra: remove custom define for Jetson TK1
2014-08-01 3:12 ` Masahiro Yamada
@ 2014-08-01 18:36 ` Stephen Warren
2014-08-04 10:36 ` Masahiro Yamada
0 siblings, 1 reply; 5+ messages in thread
From: Stephen Warren @ 2014-08-01 18:36 UTC (permalink / raw)
To: u-boot
On 07/31/2014 09:12 PM, Masahiro Yamada wrote:
> Hi Stephen,
>
>
>
> On Thu, 31 Jul 2014 17:29:38 -0600
> Stephen Warren <swarren@wwwdotorg.org> wrote:
>
>> From: Stephen Warren <swarren@nvidia.com>
>>
>> Now that Kconfig has a per-board option, we can use that directly rather
>> than inventing a custom define for the AS3722 code to determine which
>> board it's being built for.
>>
>> Signed-off-by: Stephen Warren <swarren@nvidia.com>
>> ---
>> board/nvidia/venice2/as3722_init.h | 2 +-
>> configs/jetson-tk1_defconfig | 1 -
>> 2 files changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/board/nvidia/venice2/as3722_init.h b/board/nvidia/venice2/as3722_init.h
>> index a7b24039f6aa..06c366e0d0d8 100644
>> --- a/board/nvidia/venice2/as3722_init.h
>> +++ b/board/nvidia/venice2/as3722_init.h
>> @@ -18,7 +18,7 @@
>> #define AS3722_LDO6VOLTAGE_REG 0x16 /* VDD_SDMMC */
>> #define AS3722_LDCONTROL_REG 0x4E
>>
>> -#ifdef CONFIG_BOARD_JETSON_TK1
>> +#ifdef CONFIG_TARGET_JETSON_TK1
>> #define AS3722_SD0VOLTAGE_DATA (0x3C00 | AS3722_SD0VOLTAGE_REG)
>> #else
>> #define AS3722_SD0VOLTAGE_DATA (0x2800 | AS3722_SD0VOLTAGE_REG)
>> diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig
>> index 9ce97c9f61b2..6926257d894b 100644
>> --- a/configs/jetson-tk1_defconfig
>> +++ b/configs/jetson-tk1_defconfig
>> @@ -1,4 +1,3 @@
>> CONFIG_SPL=y
>> -CONFIG_SYS_EXTRA_OPTIONS="BOARD_JETSON_TK1="
>> +S:CONFIG_ARM=y
>> +S:CONFIG_TARGET_JETSON_TK1=y
>> --
>> 1.9.1
>
>
>
> Or you may rename CONFIG_TARGET_JETSON_TK1 to CONFIG_BOARD_JETSON_TK1
> or another name.
>
> I don't want to force CONFIG_TARGET_ name convention.
> You can change config names if you like. It is up to you.
I assume you don't object to the current patch, but were just pointing
out that I could rename the variable if I wanted?
All the configs/${board}_defconfig I looked at use
CONFIG_TARGET_${board}, so I think it's best if I just convert the code
to using that so everything is consistent.
...
> When I see Tegra family, each board has its own config header.
> CONFIG_BOARD_ as well as CONFIG_TARGET_ will work.
AFAIK, only Jetson TK1 used a custom CONFIG_BOARD_xxx variable. I only
did that because it shares some code with Venice2 and needed to define
some variable do distinguish the two boards, and there wasn't already a
standard variable for this in the build process. I'm quite happy to
convert to the standard (or even de-facto) standard variable we have now.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH] ARM: tegra: remove custom define for Jetson TK1
2014-08-01 18:36 ` Stephen Warren
@ 2014-08-04 10:36 ` Masahiro Yamada
2014-08-04 16:43 ` Stephen Warren
0 siblings, 1 reply; 5+ messages in thread
From: Masahiro Yamada @ 2014-08-04 10:36 UTC (permalink / raw)
To: u-boot
Hi Stephen,
On Fri, 01 Aug 2014 12:36:22 -0600
Stephen Warren <swarren@wwwdotorg.org> wrote:
> >
> >
> > Or you may rename CONFIG_TARGET_JETSON_TK1 to CONFIG_BOARD_JETSON_TK1
> > or another name.
> >
> > I don't want to force CONFIG_TARGET_ name convention.
> > You can change config names if you like. It is up to you.
>
> I assume you don't object to the current patch, but were just pointing out that I could rename the variable if I wanted?
I do not object to this patch at all.
Yes, I just pointed out it just in case.
> All the configs/${board}_defconfig I looked at use CONFIG_TARGET_${board}, so I think it's best if I just convert the code to using that so everything is consistent.
>
> ...
> > When I see Tegra family, each board has its own config header.
> > CONFIG_BOARD_ as well as CONFIG_TARGET_ will work.
>
> AFAIK, only Jetson TK1 used a custom CONFIG_BOARD_xxx variable. I only did that because it shares some code with Venice2 and needed to define some variable do distinguish the two boards, and there wasn't already a standard variable for this in the build process. I'm quite happy to convert to the standard (or even de-facto) standard variable we have now.
This might be rahter an open question, but I was just wondering which prefix is nice for choosing a board.
- CONFIG_BOARD_*
This seems clear prefix for board select. But we will have the name space conflict with
exsting macros such as
CONFIG_BOARD_LATE_INIT, CONFIG_BOARD_EARLY_INIT_F, etc.
- CONFIG_TARGET_*
The current implementation is using this.
- CONFIG_MACH_*
ARM Linux adopts this name rule and I can see various headers are using it.
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH] ARM: tegra: remove custom define for Jetson TK1
2014-08-04 10:36 ` Masahiro Yamada
@ 2014-08-04 16:43 ` Stephen Warren
0 siblings, 0 replies; 5+ messages in thread
From: Stephen Warren @ 2014-08-04 16:43 UTC (permalink / raw)
To: u-boot
On 08/04/2014 04:36 AM, Masahiro Yamada wrote:
> Hi Stephen,
>
>
>
> On Fri, 01 Aug 2014 12:36:22 -0600
> Stephen Warren <swarren@wwwdotorg.org> wrote:
>
>>>
>>>
>>> Or you may rename CONFIG_TARGET_JETSON_TK1 to CONFIG_BOARD_JETSON_TK1
>>> or another name.
>>>
>>> I don't want to force CONFIG_TARGET_ name convention.
>>> You can change config names if you like. It is up to you.
>>
>> I assume you don't object to the current patch, but were just pointing out that I could rename the variable if I wanted?
>
> I do not object to this patch at all.
> Yes, I just pointed out it just in case.
Great. For now, I think I'll stick with the patch I sent.
>> All the configs/${board}_defconfig I looked at use CONFIG_TARGET_${board}, so I think it's best if I just convert the code to using that so everything is consistent.
>>
>> ...
>>> When I see Tegra family, each board has its own config header.
>>> CONFIG_BOARD_ as well as CONFIG_TARGET_ will work.
>>
>> AFAIK, only Jetson TK1 used a custom CONFIG_BOARD_xxx variable. I only did that because it shares some code with Venice2 and needed to define some variable do distinguish the two boards, and there wasn't already a standard variable for this in the build process. I'm quite happy to convert to the standard (or even de-facto) standard variable we have now.
>
>
>
> This might be rahter an open question, but I was just wondering which prefix is nice for choosing a board.
>
> - CONFIG_BOARD_*
>
> This seems clear prefix for board select. But we will have the name space conflict with
> exsting macros such as
> CONFIG_BOARD_LATE_INIT, CONFIG_BOARD_EARLY_INIT_F, etc.
>
> - CONFIG_TARGET_*
>
> The current implementation is using this.
This option seems fine to me. It's pretty obvious what it means, and as
you noted avoids the possibility of conflicting with various
CONFIG_BOARD_* already in use in U-Boot.
>
>
> - CONFIG_MACH_*
>
> ARM Linux adopts this name rule and I can see various headers are using it.
>
>
> Best Regards
> Masahiro Yamada
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-08-04 16:43 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-31 23:29 [U-Boot] [PATCH] ARM: tegra: remove custom define for Jetson TK1 Stephen Warren
2014-08-01 3:12 ` Masahiro Yamada
2014-08-01 18:36 ` Stephen Warren
2014-08-04 10:36 ` Masahiro Yamada
2014-08-04 16:43 ` Stephen Warren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.